Stage electrician jobs near me - 82 jobs

RESPONSIBILITIES: Assists electricians by performing assigned tasks under the direct supervision of an assigned electrician. Must keep all materials, tools, and equipment in an orderly fashion, maintain a clean work area at all times, demonstrate safe work habits and exhibit proper care of all tools and equipment. Experience in commercial, residential, and industrial electricity is preferred. TOOLS REQUIRED: Lineman's pliers with crimper, standard flat head and Phillips screwdrivers, wire strippers, razor knife, side cutters (pliers), hammer, tool pouch, voltage tester, plug tester, and a tape measure. A cordless drill is recommended but not required. WORKING CONDITIONS: May require working in all-weather elements (heat, cold, rain, snow, etc.) depending on job location and/or time of year. Must have required hand tools at all times while at work site (waist tool belts can weigh up to 30 lbs.). Must be able to work from all ladder types (i.e. step ladders up to 16', "A" frame ladders, and extension ladders). Must wear personal protective equipment (i.e. hard hat, safety glasses, safety harness, and respirator) as required. Must be able to work assigned hours as well as overtime, as required. Must work well with others as a member of a team to complete tasks. PHYSICAL REQUIREMENTS: Ability to bend, stoop, squat, crawl, climb, kneel, balance, push, pull, and reach overhead. Ability to independently lift work loads of up to 50 lbs. Repetitive use of arms, hands, and fingers. Ability to climb ladders of all types. Ability to work while constantly moving. Ability to reach and stretch to position equipment, fixtures, etc. while maintaining balance.

The Shelly Company, a CRH company, is a vertically integrated supplier of aggregates, asphalt, ready mix concrete and paving services throughout the state of Ohio. Our commitment to quality drives us to use the most modern, efficient and environmentally friendly technology in our industry. The Shelly Company is known throughout the industry for innovation, quality and for our commitment to safety. Position Overview Individual shall plan new or modified installations consistent with specifications, national and local electrical codes, install electrical components to NEC specifications, troubleshoot and repair faulty equipment, perform basic wiring, and follow and alter wiring schematics. Key Responsibilities (Essential Duties and Functions) The duties and responsibilities include but are not limited to the following: * Perform all work safely and within MSHA and NEC standards * Maintain and troubleshoot electrical equipment and power distribution throughout multiple plants. * The ability to have flexible hours and to be on call. * Interpret electrical printouts, installation instructions, and work orders. * Establish the appropriate procedures to locate and correct electrical problems, and determine electrical component replacements. * Troubleshoot electrical problems in power circuits rated at 120 - 480 volts, in control circuits of various voltages. Repair transformers and circuit breakers. * Perform splices and terminations. * Install and maintain power controls on equipment. * Install and maintain plant lighting * Perform work area inspections. * General understanding of OSHA & MSHA regulations. Other Requirements * Display a professional and courteous attitude to co-workers, supervisors, and the general public at all times. * Must be willing to travel and work away from home when required. * Must be willing to work nights and weekends when necessary. * Report to the assigned job site ready to begin work at the designated start time. * Strict adherence to safety requirements and procedures as outlined in the Manual of Safety Practices and Procedures. * Strict adherence to Shelly Company policies and procedures as outlined in the Company Book of Policies. * Willingness to work in a team environment and assist co-workers or supervisors with other duties as required. * Timely and regular attendance is an expectation of performance for all Shelly Company employees. Employees will be held accountable for adhering to their workplace schedule. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Education and Experience One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively to customers or employees of organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Personal Protective Equipment Individuals are required to wear personal protective equipment in designated operations and production areas as stated by OSHA and/or MSHA. Protective equipment that may be required, but not limited to, for this position: Welding Gloves, Hard Hat, Hearing Protection, Padlocks for Lockout/Tagout, Safety (hard toe) Shoes, use of Seatbelt and harnesses when required. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee frequently is required to climb or balance. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move more than 100 pounds. Specific vision abilities required by this job include distance vision, peripheral vision, and depth perception. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. The work environment requires constantly interacting with other people. The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Other duties may be assigned as required. Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What CRH Offers You * Highly competitive base pay * Comprehensive medical, dental and disability benefits programs * Group retirement savings program * Health and wellness programs * An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! The Shelly Company, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. Date: Dec 1, 2025

F5 Facility Services is seeking a highly skilled and self-motivated Remote Commercial Service Electrician to join our growing team. This is a remote position requiring exceptional independence and the ability to work with limited management interaction. The ideal candidate will be responsible for providing expert electrical troubleshooting, maintenance, and repair services to our diverse commercial clients. This role demands a strong understanding of commercial electrical systems, superior problem-solving skills, a commitment to delivering high-quality workmanship, exceptional customer service, the ability to accurately quote jobs, proficiency in utilizing company-provided mobile applications for communication and reporting, and the ability to utilize customer-specific software for time tracking and job management. Responsibilities: Perform electrical troubleshooting, diagnostics, and repairs on commercial electrical systems, including lighting, power distribution, control systems, and emergency systems. Install, maintain, and repair electrical wiring, fixtures, and equipment in accordance with local and national electrical codes. Respond to service calls promptly and efficiently, providing accurate diagnoses and effective solutions, requiring minimal direct supervision. Perform preventative maintenance on commercial electrical systems to ensure optimal performance and safety. Read and interpret blueprints, schematics, and technical drawings. Communicate effectively with clients, providing clear explanations of electrical issues and repair options, proactively managing client relationships. Maintain accurate records of work performed, materials used, and time spent on each job, ensuring meticulous documentation. Adhere to all safety protocols and regulations, ensuring a safe work environment for yourself and others. Prepare accurate and detailed quotes for repair, maintenance, and installation projects. Maintain and manage company-provided service vehicle and equipment. Work collaboratively with other team members remotely, ensuring efficient and effective service delivery. Be available for on-call and after-hours work, as needed. Utilize company-provided mobile applications to document job details, submit reports, relay information to management, track inventory, and manage work orders, demonstrating strong self-management. Utilize customer-specific software for accurate time tracking, job progress updates, and reporting. Qualifications: Minimum of 3-5 years of experience as a Commercial Service Electrician. Proven ability to work independently and manage time effectively. Strong knowledge of commercial electrical systems and NEC codes. Proven ability to troubleshoot and repair complex electrical problems. Excellent communication and customer service skills. Ability to read and interpret blueprints and schematics. Proficient in the use of electrical testing equipment. Valid driver's license and clean driving record. Strong work ethic and attention to detail. Ability to lift and carry heavy objects, and work in various environments. Ability to pass a background check and drug screening. Ability to accurately estimate material and labor costs for electrical projects. Proficiency with mobile technology and the ability to learn and utilize company-specific applications. Ability to quickly learn and adapt to customer-specific software programs. Preferred Qualifications: Valid Electrician License Experience with building automation systems. Certifications in specific electrical systems or technologies. Experience in a service-oriented business. Benefits: Competitive salary. Comprehensive benefits package (health, dental, vision, 401(k), etc.). Company vehicle and phone. Paid time off and holidays. Opportunities for professional development and advancement.

Company Vehicle and Monthly Bonus Opportunities for qualified applicants. R & T Yoder Electric, Inc in Columbus, OH is looking to hire a full-time experienced Residential Service Electrician to work in our Service call and troubleshooting division. Are you a skilled Residential Service Electrician who is looking for an established and respected company to grow your career with? Are you looking for a company that appreciates your hard work and dedication? If so, keep reading! As a Residential Service Electrician, you will earn a competitive wage of up to $40/hour, depending on experience. Plus, we offer a $300 sign-on bonus! You will also be eligible for generous benefits including health, vision, dental, life insurance, a 401(k), 2 weeks of paid time off (PTO) that increases based on time of service, 2 paid sick days, paid holidays, monthly bonus opportunities, and a company vehicle and uniforms. If this sounds like the opportunity that you've been looking for, please fill out our initial 3-minute, mobile-friendly application! ABOUT R & T YODER ELECTRIC, INC We are a family-owned and operated business with over 17 years of experience in the Central Ohio region. We pride ourselves on our company culture here at R & T Yoder where we offer great company events for each season! Our team enjoys a spring in-service training with catered lunch and games, a summer family picnic, a fall bonfire/hayride, and a winter Christmas party! In addition to our fantastic company culture, we offer competitive compensation and benefits. QUALIFICATIONS 4+ years of field experience Knowledge of residential electrical systems, NEC, and local codes A plus to have knowledge of industrial, medical or agriculture electrical systems Valid driver's license and a good driving record Are you a problem solver who enjoys troubleshooting? Are you self-motivated? Do you have excellent communication skills including the ability to explain technical information clearly and in layman's terms? Are you service-oriented? Do you find it easy to establish a good rapport with people? Are you respectful of others and their personal property? Are you punctual and reliable? Do you take pride in your work? If so, please apply today!

Job Description MAINTENANCE ELECTRICIAN Stewart Glass is at the forefront of solar glass manufacturing in the United States, delivering high-performance glass solutions for a sustainable future. As a subsidiary of Stewart Engineers, we build on a legacy of expertise in float and coated glass technology. We are committed to innovation, quality, and operational excellence. At Stewart Glass, you will work in a state-of-the-art glass factory, collaborating with a highly skilled team in a dynamic and hands-on environment. We are currently seeking a Project Engineer to join our team in Logan, OH. We are seeking a skilled Maintenance Electrician to join our team. The ideal candidate will be responsible for maintaining, troubleshooting, and repairing electrical systems and equipment in a commercial or industrial setting. This role requires a strong understanding of electrical systems, safety protocols, and the ability to read blueprints and schematics. The Maintenance Electrician will play a critical role in ensuring the reliability and efficiency of our operations. RESPONSIBLITIES Perform routine maintenance and repairs on electrical systems and equipment. Troubleshoot electrical issues using tools such as voltmeters and ohmmeters. Read and interpret blueprints, schematics, and technical drawings to understand system layouts. Install, maintain, and repair high voltage and low voltage electrical systems. Ensure compliance with National Electrical Code (NEC) standards during all work performed. Utilize power tools safely and effectively for various tasks. Collaborate with other maintenance personnel to ensure optimal operation of all equipment. Document all maintenance activities and repairs performed. EXPERIENCE Proven experience as a commercial or industrial electrician is required. Strong knowledge of electrical systems, including high voltage and low voltage applications. Familiarity with NEC regulations and safety standards is essential. Proficiency in using electrical testing equipment such as voltmeters and ohmmeters. Ability to read blueprints and technical diagrams accurately. Experience with power tools and general maintenance practices is advantageous. Strong problem-solving skills and attention to detail are required. BENEFITS: This is a full-time position offering a competitive salary and a comprehensive benefits package, including medical, vision, dental, and life insurance, along with paid vacation and holidays. Job Type: Full-time, hourly (eligible for over time) Work Location: In person Schedule: All positions at Stewart Glass are day shifts for the time being. Schedule subject to change with production. NO SPONSORSHIP.

Are you looking for an opportunity in the lighting and construction industry?! Are you ready to continue to learn, but also ready to showcase your current skills & abilities with a growing company?! Evolved Lighting & Energy is seeking a Service Electrician to join our growing company!!! Apply today to be considered! Evolved Lighting & Energy is a growing lighting design and installation company based out of Columbus, Ohio. We currently have an opening for hard-working and reliable Electrician within our company. We service Commercial, Industrial, and Municipal Customers throughout the state of Ohio and Midwest! Job Description: The primary responsibility is to ensure safe and reliable installation of electrical systems and devices. Typical projects will be related to lighting retrofit and lighting control projects. We are looking for a motivated and dependable Electrician to join our team. Our ideal candidate has a strong interest in pursuing this trade as a career and is excited to learn skills and gain experience under a journeyman electrician. Job Duties: Troubleshoots electrical issues for any projects needed. Diagnose electrical issues (loose neutrals, tracing circuits, switching controls, etc.) Reviews and looks over electrical plans/drawings Ensures install crew is installing equipment correctly and up to electrical code standards Determines if product is suitable for intended applications Completes service calls and rotates for emergency work Program control systems Follow blueprints or electrical schematics to help install and repaid electrical wiring Performs EV charging installs Familiar with hand and power tools Follow directions and climb heights Assist with any aspect of an electrical project and daily responsibilities Additional duties as needed Required Skills and Abilities: Excellent organizational skills and attention to detail Ability to communicate through multiple mediums (text, email, phone) General knowledge of commercial construction material Ability to use common hand and power tools Physically able to maneuver ladders, fixtures, equipment, and tools daily Must be able to travel throughout week (Home most weekends) Must be able to work flexible schedule and be on call if needed Must have a valid State Issued Driver's License Experience operating lifts: exp: Scissor Lift or Boom Lift Benefits: Shift & Travel Pay Differential, Paid Travel, Lodging, Mileage and Per Diem when traveling Tuition Sponsorship and Reimbursement Options Available Health, Dental, Vision, Company Paid and Voluntary Life and AD&D, Simple IRA, Short- and Long-Term Disability Holiday and paid off time available according to company policies

The Industrial Electrician plays a key role in maintaining the electrical and control systems that support production and safety operations at the steel drum reconditioning plant. This position combines hands-on electrical maintenance, PLC troubleshooting, and instrumentation work to ensure efficient operation of cleaning, coating, and reconditioning equipment, as well as auxiliary plant systems. Key Responsibilities: Electrical Maintenance Install, maintain, and repair electrical systems including motors, drives, panels, sensors, and power distribution Diagnose and troubleshoot electrical faults in production and facility systems Perform preventive maintenance on electrical equipment to minimize downtime Ensure all electrical work complies with NEC standards and plant safety policies Plant Systems Support the operation of process lines for cleaning, reconditioning, painting, and drying of steel drums Maintain electrical components of conveyors, ovens, burners, pumps, and wash stations Collaborate with production and maintenance teams to minimize downtime and improve reliability Participate in energy efficiency and equipment improvement initiatives Safety & Documentation Follow and enforce all plant safety, lockout/tagout, and environmental procedures Maintain accurate maintenance logs, schematics, and documentation of electrical/control changes Support root cause analysis and continuous improvement activities Required Qualifications: Education & Experience High school diploma or GED required; technical or trade school certificate preferred Journeyman Electrician license or equivalent experience preferred Minimum 3-5 years of experience in an industrial or manufacturing environment Experience with PLCs, VFDs, sensors, and control wiring required Familiarity with 3-phase systems, motor controls, and panel building Skills & Competencies Strong troubleshooting and diagnostic skills (electrical and controls) Ability to read and interpret electrical schematics and wiring diagrams. Knowledge of industrial automation, instrumentation, and control theory Excellent safety awareness and attention to detail. Ability to work independently or as part of a cross-functional team Basic mechanical aptitude a plus (pneumatics, hydraulics, etc.) Preferred Qualifications Experience in metal or drum reconditioning, coating, or similar process industries. Familiarity with hazardous location wiring (Class I, Div 1/2). Understanding of industrial communication protocols (Ethernet/IP, Modbus, etc.). Experience with preventive maintenance software (CMMS). Physical & Work Environment Requirements Work performed in a heavy industrial environment with exposure to heat, noise, and moving machinery Must be able to lift up to 50 lbs, climb ladders, and work in elevated or confined spaces as needed May require shift work or on-call availability for maintenance emergencies

Now Hiring experienced electricians in Columbus. TradeWorX is a full-time industrial and construction employer. Wage is $25 - $35 per hour and is based upon experience and interview- HIGHLY compensated for schooling, experience, credentials and tenure! Apply and schedule an interview to discuss. Top Benefits: Medical (company paid at 50% for individual benefits) Dental & Vision 401k (with financial advisor) Paid Holidays (six in total) PTO Company Paid Group Life Insurance Accident and Critical Illness benefits Additional Perks available! Job Description: Install new electrical system. This includes rough in work, running and pulling wires, making electrical connections, terminating electrical connections, bending conduit, installing receptacles and fixtures, and other assigned electrical duties. Maintain and repair current electrical systems. Maintain a safe work area. Working along with other electricians in a commercial construction setting. Must Haves: Commercial electrical experience. Experience in with rough ins, installing receptacles, connections and terminations, conduit, etc. Able to perform general physical activities common to electrical trade. Valid driver's license with reliable transportation General tools for the electrical trade Personal Protection Equipment (PPE) - Hard hat, gloves, boots, gloves If interested, please apply and we will contact you regarding the next steps. Full time employer with steady work, healthy backlog and overtime opportunities. Additional work opportunities available, know someone? Refer a friend and earn. Work with the best. TradeWorX #TradeWorX #TradeWorX-Cleveland #WorkWithTheBest

wifieye Inc. is looking an experienced Alarm and Low Voltage Technician Starting Pay $30.00 + or - DOE (Medical/Dental/Vision/Company Matching Retirement Plan) The job will consist of pulling cable, maintaining trailer/equipment and assisting with other wireless/camera jobs. Installing or troubleshooting burg/fire alarm systems. Delivering equipment to remote job sites. Setting up and developing cutting edge security devices/systems. Preferred Qualifications/Skills/Knowledge Base MUST have a clean DMV record Experience in IP Surveillance Cameras is a preferred Experience with Milestone is preferred Experience with Alarms and Low Voltage Equipment is a MUST Experience with Fire Alarms is preferred Experience with routers and cellular communications is REQUIRED Must be a team player/work well with others/ able to work independently Can't be afraid of heights, must be able to climb ladders and lift 50 lbs Daily travel with some overnight travel is required wifieye, Inc. is on the cutting edge of remote, autonomous video surveillance systems installed all over the State of California, currently. Looking for employees that enjoy doing what others say can not be done. Job Type Full-time **There are questions at the end of application process that must be completed to be considered for the position. View all jobs at this company

Job Description Now Hiring: Low Voltage Electricians

Essential Responsibilities: + Provide onsite and remote technical direction to site personnel and customers. + Prepare job planning documents that define the work scope being performed through engineering instructions, drawings, and process instructions. + Provide leadership to skilled labor performing work on customer sites. + Troubleshoot and provide routine maintenance checkout for a wide range of equipment such as power transformers, switchgear, protection relays, control systems, and motors. + Troubleshoot electrical problems in the substations on wind and solar plants. + Perform administrative functions such as writing technical reports, ordering materials, securing quotations, and preparing job completion reports to customers. + Exercise good judgment in controlling costs. + Maintain strong safety mindset at all times. Qualifications/Requirements: - High School Diploma / GED Desired Characteristics: + Previous HighVoltage experience + Familiar with test equipment and testing procedures for transformers, relays, breakers, and underground splices. + Familiar with switching pad mount transformers and substations. + Exceptional communication and interpersonal skills. + Must be able to read schematics. + Ability to write and interpret switching orders. + Required to mentor and train unqualified technicians + Proven experience in leading field service team. + Safety must be top priority. + Strong organizational and interpersonal skills. + Willingness to travel. + Perform transformer infrared and oil sampling. + Flexibility required. + Advanced computer skills with Microsoft Office, Microsoft Teams, and SmartSheets, + Basic workplace first aid GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position For candidates applying to a U.S. based position only: *The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on January 21, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

**Discover a more connected career** At Ervin Cable Construction, LLC, as a Laborer on our Telecom Underground team, you'll participate in all phases of underground construction, including loading, delivery, digging, and equipment operation. **Connecting you to great benefits** + Weekly Paychecks + Paid Time Off, Parental Leave, and Holidays + Insurance (including medical, prescription drug, dental, vision, disability, life insurance) + 401(k) w/ Company Match + Stock Purchase Plan + Education Reimbursement + Legal Insurance **What you'll do** + Perform construction tasks including loading, delivery, digging, and operating equipment + Install underground telecommunications cabling + Operate construction equipment, and maintain work areas + Clearly communicate with all team members + Complete daily production reports + Help with site restoration efforts + Perform work in all weather conditions + Other duties as assigned **What you'll need** + To be 18 years of age or older + Authorization to work in the United States for this company + High School Diploma, GED equivalent, or relevant work experience + Previous experience safely operating various hand tools and utility trucks, is preferred **Physical abilities & exposures** + **Routinely:** work at heights, occasional entry into attics and crawl spaces and alone in remote locations, operate vehicle and heavy machinery; squeeze, fine hand motion, bend, stoop, stand, walk, climb stairs, and lift up to 55 pounds without assistance. + **Occasionally** : use ladder, keyboard and mouse **Why grow your career with us** Your career here is more than just a job - it's your pathway to opportunity. Our hands-on training, supportive environment, and responsive leadership connect you to work with purpose. Our commitment to you extends beyond professional development to a safety-first culture that ensures you can do what you do best, with peace of mind. **Building stronger solutions together** Our company is an equal-opportunity employer - we are committed to providing a work environment where everyone can thrive, grow, and feel connected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

SUMMARY: The Electrical Journeyworker is responsible for the maintenance, operation and repair of electrical systems and assists with and performs installation and maintenances tasks in order to ensure the effective and safe operation of various types of electrical equipment. ESSENTIAL JOB FUNCTIONS: Reads, interprets, and executes drawings, schematics, blueprints, and electrical code specifications Tests electrical equipment and parts for continuity, current, voltage, and resistance Installs, repairs, and/or replaces AC/DC motors and drives, motors, starters or relays Installs, repairs, or replaces electrical wiring, receptacles, switch boxes, conduits, feeders, support structures, fiber-optic, line assemblies, lighting, and alternative electrical parts Installs, repairs, or replaces generators and industrial storage batteries Performs preventive maintenance and testing of electrical systems Installs electrical circuits, panels, conduit, protecting devices, switches, and equipment required to accommodate the NEC Corrects connections and wiring on equipment controls Collaborates with other workers and crew members to assist with work as necessary May be assigned to mentor, coach, and manage Electrical Apprentice employees Other duties as assigned QUALIFICATIONS: All employees must possess the ability to promote and model the Premise Core Values of: Be Ready to Learn Own the Result Build Trust Do the Right Thing Drive to Complete In addition to the above, other required qualifications for this role are: Journeyworker Electrician License (required) 1-3 years of experience working as an Electrical Journeyworker Previous experience working on a solar field/farm (7MW and up) The ability to keep an organized workspace for yourself and others to work efficiently The ability to work underground, inside buildings, or on rooftops The ability to travel to job sites out of town and overnight as needed Possess a basic understanding of electricity Skilled in organization and problem-solving Excellent verbal and written communication skills. Able to communicate professionally and clearly through spoken and written forms with peers and management. Able to effectively communicate with people at all levels and from various backgrounds. Valid certifications and licensing, as needed Working knowledge of construction, quality, safety, and OSHA guidelines Preferred qualifications are: Valid driver's license and ability to maintain a clean driving record OTHER REQUIRED COMPETENCIES: Dealing with Ambiguity - Decides and acts effectively without having the total picture and can comfortably handle risk and uncertainty. Does not exhibit frustration when confronted with change and can shift focus and direction effectively. Can make decisions without always having the complete picture Work Standards - Sets high standards of performance for self and others. Assumes responsibility and accountability for successfully completing assignments or tasks. Admits mistakes and re-focuses efforts when appropriate. Encourages others to take responsibility. Self-imposes standards of excellence rather than having standards imposed. Ensures high quality. Acting with Integrity and Trust - Is widely trusted and seen as a direct, truthful individual. Can present the truth in an appropriate and helpful manner. Keeps confidences. Admits mistakes. Doesn't misrepresent him/herself for personal gain. Adheres to an appropriate and effective set of core values and beliefs during both good and bad times, and acts in line with those values. Practices what he/she preaches Continuous Learning and Self-Development - Actively identifies new areas for learning, regularly creates and takes advantage of learning opportunities. Uses newly gained knowledge and skills on the job through their application. Is personally committed to and actively works to continuously improve him/herself. Works to deploy strengths. Initiating Action and Results Oriented - Takes prompt action to accomplish objectives and achieve goals beyond what is required. Acts proactively to anticipate challenging issues and situations and prepare for solutions. Bottom line oriented and pushes self and other for results. Is consistently a top performer. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to, stand, sit, walk, lift, squat, push, pull, climb stairs, ladders and possibly towers, hear, see, reach, grasp and use hands and fingers to operate a computer key board, telephone, power tools, and equipment. The employee must have the ability to occasionally lift more than 50 lbs. WORKING ENVIRONMENT: While performing the essential functions of this job, the employee is exposed to extreme weather conditions, including heat and cold, and wet or humid. The employee may work in high places, and/or work around moving mechanical parts, vehicles and other equipment. The employee may also work in areas where the noise volume is loud and constant. The employee must have the ability to work overtime and to travel to remote job sites approximately 60 - 80% of their work week which will include overnight stays. Premise Inc. is an equal opportunity, affirmative action, veteran-friendly employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. The duties and responsibilities listed in this are not all-inclusive and other duties may be assigned. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Benefits: * 401(k) * Bonus based on performance * Competitive salary * Opportunity for advancement * Paid time off * Profit sharing * Training & development * Free uniforms Join Our Electric Journey at Mister Sparky of Greater Columbus Are you ready to spark your career with a company that values integrity, professionalism, and a commitment to community? Mister Sparky of Greater Columbus isn't just about providing electrical services; we're about creating a brighter future for our team and the communities we serve. As a growing start-up, we offer unique opportunities for experienced electricians to grow, thrive, and lead in the electrical industry. With us, your work is more than a job-it's a journey towards excellence and satisfaction. Do you value professionalism and punctuality? Do you want to work with the best pros in the electrical industry? Then you could be a candidate for Mister Sparky. If you value a rewarding career and would like your customers to be genuinely satisfied, you'll be fit for our team! Job Summary This position performs and coordinates the installation and service of electrical products and services in a residential and light commercial setting. Job Duties * Assemble, install, test, and maintain residential and commercial electrical equipment and services. * Diagnose and repair malfunctioning electrical systems, equipment, and components. * Ensure compliance with all applicable electrical codes and safety standards. * Plan and execute electrical wiring, equipment, and fixture installations. * Use the Straight Forward Pricing Guide, accurately present repair or installation options, and complete safety inspections. * Works with and understands blueprints, electrical schematics and job specifications as it applies to your craft. * Maintain a clean, organized work environment, including company vehicles. * Collaborate across departments to ensure seamless service delivery. * Uphold Mister Sparky's professional image and adhere to our dress code, safety policies, and code of ethics. Minimum Requirements * Minimum 3+ years of verifiable residential electrician experience. * Strong understanding of electrical field concepts, best practices, and codes. * Excellent communication and customer service skills. * Ability to communicate effectively to clients about issues and provide accurate solutions. * Valid driver's license with a clean record. * Ability to pass a background check and drug screening. * Physical ability to perform job duties. * High school diploma or equivalent Preferred Qualifications: * Local and state licenses as needed Empower Your Career with Mister Sparky At Mister Sparky of Greater Columbus, we're not just offering a job; we're offering a career path filled with opportunities to learn, grow, and lead. Our comprehensive training program is tailored to support your professional journey, featuring: * Versatile Learning: Engage with online courses, live webinars, and instructor-led training designed to fit your learning style and schedule. * Exclusive Vendor Training: Stay at the forefront of electrical technology with specialized sessions from industry leaders. * Innovative VR Training: Dive into virtual scenarios that enhance your skills in a risk-free environment. * Ongoing Development: Benefit from continuous learning opportunities that pave the way for advancement within our company. Spark Your Journey to Success Are you ready to elevate your skills and power up your career with cutting-edge training and real advancement opportunities? Mister Sparky of Greater Columbus is looking for electricians who are passionate about quality and eager to make a difference. Join us to build a future where your career shines bright. Our Commitment to Your Health and Financial Well-being At Mister Sparky of Greater Columbus, we recognize the value of our team and the importance of a comprehensive benefits package. As we grow together, we're dedicated to supporting your health and financial future through our current offerings and our vision for more robust benefits as our company expands. Flexible Health Support with HRA: * Personalized Healthcare: We provide a Health Reimbursement Arrangement (HRA), allowing you to choose the healthcare services that best fit your needs and those of your family. This flexible approach ensures you're supported in maintaining your health without being confined to a limited network of providers. * Empowering Your Choices: Understand the value of having control over your healthcare decisions. Our HRA plan contributes towards your medical, dental, and vision expenses, demonstrating our commitment to your well-being, even in our early stages. Securing Your Future with 401(k) and Profit Sharing: * Invest in Your Future: Our 401(k) plan with profit sharing is designed not just as a retirement savings plan but as a way to directly share in the success of the company you help build. While traditional company matches are common, profit sharing connects your contributions to our collective achievements, enhancing your potential for financial growth. * Building Together: As Mister Sparky of Greater Columbus grows, so does your opportunity for increased rewards. Our profit-sharing approach is a testament to our belief that every team member plays a vital role in our success and should benefit from it. A Brighter Future, Together We're on a journey not just to provide exceptional electrical services but to build a supportive and thriving workplace. Our benefits package, including the HRA and 401(k) with profit sharing, reflects our commitment to your health and financial well-being today and our dedication to enhancing these offerings as we grow. Earning Potential: * Competitive Pay Structure: Receive fair regular and overtime wages, reflective of your dedication and hard work. * Incentive-Based Earnings: We offer additional opportunities for incentive-based earnings, rewarding excellence and exceptional performance in serving our customers and the community. Illuminate Your Future with Mister Sparky This is your invitation to forge a path filled with growth, success, and opportunity at Mister Sparky of Greater Columbus. Bring your passion, expertise, and dedication to a team where your contributions are deeply valued and your well-being is always a priority. Apply now and join us on an exciting journey to light up our community and shape a bright future together. Your moment to illuminate your career and make a meaningful impact is here. Let's embark on this remarkable journey together.

Job Role: As a Low Voltage Technician with DRIG, you will be responsible for installing and troubleshooting aftermarket electronic systems in various vehicles and heavy machinery. Working on a contract basis, you'll handle fleet telematics, such as GPS trackers and cameras, while ensuring quality and consistency across each project. This role requires traveling to job sites, with all out -of -area travel coordinated by DRIG, and demands a strong commitment to excellent service and technical precision. Key Responsibilities: Install and configure a range of aftermarket electronics, including GPS trackers, dash cams, back up cameras, remote starters, alarms, DVR systems, and ignition interlock devices. Complete projects for high -profile clients in partnership with DRIG's project managers, ensuring customer satisfaction and a smooth process from start to finish. Maintain accurate records of completed installations, ensuring each job meets DRIG's quality standards and client requirements. Work with DRIG's Quality Control (QC) team during the first 30 days to ensure alignment with DRIG standards and to receive guidance on complex jobs. Communicate effectively with customers, providing exceptional service and ensuring a positive experience in every job. Use DRIG's intuitive management system to review job details, schedule appointments, and manage job -related documentation. Travel locally or out of area as required, with all travel arrangements made by DRIG's travel department. Job Goals: Ensure Installation Quality: Deliver flawless installations that meet DRIG's standards, maintain client satisfaction, and reduce the need for follow -up visits. Maximize Efficiency and Productivity: Consistently complete scheduled jobs within allotted timeframes, optimizing travel and work schedules to meet or exceed expected earnings. Deliver Outstanding Customer Service: Foster positive client relationships, maintaining DRIG's reputation for quality and reliability. Uphold Compliance and Standards: Adhere to all client and DRIG safety, quality, and compliance standards, ensuring projects are completed accurately and efficiently. Requirements Proven experience with aftermarket electronics installations (GPS trackers, cameras, remote starters, etc.) Reliable vehicle and 12 -volt tools. Excellent customer service skills. Benefits Why Partner with DRIG? Streamlined Travel Arrangements For jobs outside your local area, our dedicated travel department handles all arrangements-flights, hotels, and rental cars-so you can focus on the job without the hassle. Consistent Pay Schedule We know consistency matters. That's why we pay twice a month-on the first and third Friday-guaranteed. Robust Quality Control and Support In your first 30 days, our experienced Quality Control (QC) team will guide you through our standards to ensure a smooth transition. And our knowledgeable team is always available to support you in every job. Local Market Growth We actively market in your local area to keep your schedule full, managing all incoming jobs through our intuitive system, so you have a steady stream of work close to home. Projects with Top Partners Our work with high -profile clients, including Verizon and AT&T, is led by DRIG project managers, who ensure seamless operations for both you and the customer. Flexible Work, Competitive Pay: Average $30 -$60+ per hour, paid by the job or piece. Travel Reimbursement: Mileage reimbursed at $0.58 per mile. Comprehensive Support: DRIG has your back from the first job to ongoing work. Direct Income Growth: We actively source jobs to fill your calendar, giving you the freedom to earn more. Partner with DRIG for quality work, consistent income, and unparalleled support. Take the next step in your career and apply today!

Job Description MCAT Solutions is a small but rapidly growing company specializing in low-voltage controls and automation systems. Our primary focus is on Building Management Systems (BMS), Electrical Power Monitoring Systems (EPMS), and mechanical control systems within data centers in and around the Columbus, Ohio area. Travel to various job sites may be required. The Low Voltage Electrician is a hands-on role responsible for installing, maintaining, troubleshooting, and repairing low-voltage electrical systems, including HVAC and building automation systems. This role goes beyond basic installation work and includes system commissioning, advanced troubleshooting, and direct collaboration with project teams and clients. Schedule: Monday-Thursday: 6:00am to 4:30pm Friday: 6:00am to 2:30pm Responsibilities Include: Install, terminate, test, and troubleshoot low-voltage cabling systems, including Cat 5/6, coax, fiber optic, and control wiring Install low-voltage systems and building automation components in commercial and industrial environments Read and interpret blueprints, wiring diagrams, schematics, and construction documents to ensure accurate installations Mount and wire control panels, sensors, actuators, and network devices Bend conduit, install cable pathways, and secure cable supports according to code and project specifications Perform system diagnostics and troubleshooting to identify and resolve issues Support the startup and commissioning of control systems, including device calibration, point-to-point testing, and functional verification Conduct inspections, testing, and routine maintenance of installed systems Accurately document installation progress, test results, and system configurations Collaborate effectively with Project Managers, contractors, and General Contractors Adhere to OSHA, NEC, and company safety standards Knowledge, Skills, and Abilities: Completion of a Low Voltage Electrical Apprenticeship or comparable experience Strong ability to read and interpret electrical drawings, schematics, and technical documentation Proficiency in the use of electrical test equipment and diagnostic tools Minimum of 3-5 years of relevant experience Ability to work at heights, in confined spaces, and in active construction environments Strong troubleshooting, problem-solving, and verbal/written communication skills Physical Requirements: Ability to lift, carry, push, and pull up to 50 pounds Ability to stand, walk, bend, kneel, crouch, and reach for extended periods throughout the workday Capable of working from ladders, scaffolding, lifts, and other elevated platforms Ability to work in confined spaces and in varying environmental conditions, including heat, cold, and dusty environments Ability to distinguish colors for proper wiring identification Ability to safely use power tools, lifts, and testing equipment Additional Requirements: Must be at least 18 years of age High school diploma or equivalent Reliable transportation to and from job sites Ability to communicate effectively in English, both verbally and in writing, for safety, coordination, and documentation purposes Ability to follow instructions, safety procedures, and company policies Why Join MCAT Solutions? MCAT Solutions offers a supportive, team-oriented work environment with opportunities for career growth in a rapidly expanding industry. We value integrity, innovation, creativity, and teamwork, and provide the tools and training needed for our team members to succeed. If you're looking to start or grow your career in the automation systems field, we'd love to hear from you. MCAT is an equal-opportunity employer. The company does not discriminate in its employment decisions against individuals on the basis of race, color, national origin, religion, sex, gender identity, sexual orientation, disability, age, marital status, family/parental status, income, political beliefs, or any other characteristic protected by federal, state or local law.

Job DescriptionSalary: THIS POSITION IS FOR OUR OHIO DIVISION AND IS NOT A TRAVELING POSITION. ALL WORK IS LOCAL TO THE COLUMBUS OHIO AREA. Our Mission is to Identify, Hire, Train and Retain the very best people! Could that be you? Join the Ace Electric team for opportunities to work with the best team and build your career with Ace University! Since our inception in Valdosta, GA in 1975, Ace has been performing quality electrical installations in a full range of markets including: commercial, mission critical, education, healthcare, institutional, industrial, correctional facilities, hospitality, military bases, retail and others. In the past 15 years, locations have been added in Macon, GA, Atlanta, GA, Jackson, TN, Statesboro, GA, Sanford, NC and Plain City, OH. Ace offers fabrication services, hard bid, design-build, negotiated contracts and fee-based work. We have the resources, professional staff and project management team to handle almost any type of electrical project. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year and has no signs of slowing down! Benefits: Health, Dental, Vision, Life, Disability, Accident and Critical Illness Insurances 401k with Match Access to Ace University: Apprenticeship Program, Leadership Training, Skill Building Classes and much more! General Summary: The Electrician Helper assists electricians by performing tasks under the direct supervision of an electrician actually installing the work and handling the bulk of materials. This employee should keep all materials, tools, and equipment in an orderly fashion and the work area clean at all times. Demonstrating safe work habits and proper care of tools and equipment. Electrician Helpers are prohibited from working on energized circuits or equipment. Preferred Job Skills: Able to maintain professional appearance and conduct at all times. OSHA 10 Hour, CPR, and First Aid trained. Able to maintain high levels of productivity, meeting deadlines while maintaining accuracy. Must be an effective and professional communicator. Mandatory Hiring Requirements: References, Background Check, Drug Screen Testing, Valid Drivers License. Responsibilities: Assist electricians by performing tasks under the direct supervision of an electrician actually installing the work and handling the bulk of materials. This employee should keep all materials, tools, and equipment in an orderly fashion and keep the work area clean at all times. Demonstrating safe work habits and proper care of tools and equipment, Apprentice I will learn and assist with performing: Basic blueprint knowledge Layout from field sketches Panel terminations Size conduit and boxes Transformer terminations Motor terminations Underground conduit installation Overhead and in wall conduit and cable installation Wire terminations in J-Box Conduit and box installation in CMU block alongside masons Pull wire feeder/branch/low-voltage Operate equipment (training will be provided). Assist in keeping fluid levels checked and greased in all equipment and vehicles. All other duties as assigned. Position Requirements: License: Valid state driver's license preferred. Certification: None required. Education:High School Graduate/GED preferred. Experience: None required. Working Conditions: Job requires working in all weather elements; heat, cold, rain, or snow, depending on job location and time of year. Must be able to utilize construction site sanitary facilities (Porta-Johns). Job requires employee to have required personal tools with him at all times (waist tool belt as worn weighs approximately 30 lbs.). Work from all types of ladders and be able to transport/relocate ladders unassisted. Employees personal weight with tools cannot exceed the rated weight capacity of ladders used. Perform work at various heights, up to 90 feet from ladders, scaffolds, aerial work platforms, cat walks and other safe work areas. Work in restricted or confined areas such as switch gear-rooms, manholes, utility tunnels and crawl spaces. Must wear all personal protective equipment as required Must be able to regularly work 40 hours per week plus overtime as required. Night shifts, weekends. Required Physical/Mental Functions: Positively identify colors of wire and other items as required. Comprehension of construction drawings, schematics and specifications. Bend conduit using hand benders. Must have the ability to safely use required power tools. Must be able to safely operate construction equipment (trencher, forklift, aerial work platforms, etc.). Capable of digging trenches, using of hand tools or power equipment. Comprehend and practice safe work procedures as outlined in Company Safety Handbook. Operate two handed tools as required. Cable cutters, hammer drills, compression tools, etc. Operate company truck with manual and automatic transmission. Read and interpret maps, instructional manuals, work site directions, and written instructions. Must hear and see well (either natural or with correction). Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead. Able to lift objects weighing up to 50 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds. Tolerant to prolonged standing and movement on foot. Climb ladders (all types). Repetitive use of arms, hands, and fingers. Completing overhead work for full day assignments. Must be able to make transition from employee parking area or street into construction work areas and to gain access to all levels of the building, even if the only means of access is by O.S.H.A. approved site construction ladder or stairs still under construction but acceptable for use. Must be able to secure tools and materials from storage areas to complete assigned tasks. AAP/EEO Statement: Ace Electric, Inc. is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identification, national origin, disability status, protected veteran status, or any other category protected by federal, state, or local law.

$1,000 Sign-On Bonus for Qualified Candidates Job Type: Full-time, Monday-Friday (No weekends) About Us Walsh Brothers Electric LLC is a family-owned business based in Lancaster, Ohio, serving residential, commercial, and new construction electrical needs. We take pride in delivering high quality, trustworthy service with integrity, clear communication, and professional workmanship. Position Summary We are seeking experienced Service Electricians to troubleshoot, repair, upgrade, and install residential electrical systems. A strong blend of technical skill, customer interaction, and sales aptitude is required. If you enjoy owning the job from start to finish and want your hard work rewarded, this is for you. Key Responsibilities Install residential wiring and circuitry (new work and retrofit) Interpret prints, plans, and wiring diagrams Diagnose and repair electrical issues using testing equipment Ensure compliance with NEC and local electrical codes Perform “new work” and “old work” applications (remodeling, retrofits) Safely operate lifts, ladders, and other job site equipment Work in attics, crawl spaces, ceilings, walls, etc. Coordinate with homeowners - explain work, answer questions, maintain professionalism Support sales efforts: identify upgrade opportunities, present options to homeowner Required Qualifications & Skills Minimum 5 years of electrical experience Previous sales experience (ability to present and sell solutions to homeowners) Strong working knowledge of NEC (National Electrical Code) Valid driver's license, reliable transportation Excellent customer communication and interpersonal skills Professional appearance and dependability Ability to work in tight or constrained spaces (attics, crawl spaces) Compensation & Benefits Sign-on bonus: $1,000 for qualified candidates Competitive base pay + weekly bonuses Weekly pay schedule Benefits package including: Health, Dental, Vision Life and Disability Insurance 401(k) with 3% match Paid Time Off & Paid Holidays Fuel card Company truck (that can be taken home) Paid training Company-supplied uniforms Opportunities for growth and advancement Regular social events and bonus opportunities Work Environment & Culture Growth-oriented, family business Emphasis on training, safety, respect, and teamwork Platform for long‐term career, not just a job Legal & Equal Opportunity Statement Walsh Brothers Electric LLC is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, veteran status, or any other characteristic protected by law. Employment is conditional upon background checks, verification of credentials, and eligibility to work in the U.S.

Sutphen Corporation is the oldest continuously family-owned and operated fire truck manufacturer in the United States of America. With a mission to build the safest, most reliable fire trucks in the world, Sutphen has manufactured emergency fire apparatus for fire departments all over the country for more than 133 years. Sutphen is seeking an electrical installer to join our growing team in Urbana, Ohio. In this role, you will be responsible for installing and maintaining the electrical systems in fire trucks, including wiring, lighting, sirens, and communication devices. They ensure that all electrical components are functioning properly to support emergency responders. This role requires strong technical skills and attention to detail to ensure the safety, quality, and effectiveness of the fire apparatus and the people/property it protects. Why Join Team Sutphen? Safety is our priority Family-owned and operated First shift operation High-quality and extremely affordable benefit packages A collaborative and challenging environment fostering high engagement and retention We have fun building the highest quality product that saves lives and property