Warehouse machine operator jobs in Sharonville, OH - 879 jobs

Are you ready to take your career to the next level while savoring the delicious taste of success? Look no further than KBP Foods, where we're searching for energetic and passionate individuals to join our KFC Team as Team Members! If you have a hunger for success and a passion for serving up finger-lickin' good food, we want YOU on our team. What's in it for you: Paid Training Free shift meal and an employee discount at our KFC restaurants. Medical, Dental, Vision benefits and accrued paid time off (PTO) Earn your GED for free, college scholarships and free online tuition. Employee perks such as cell phone discounts; Saving Match Program, Employee Assistance Program through KBP Cares. Career growth opportunities utilizing our training programs and coaching to learn and develop your skills. Requirements: What you bring to the table: Experience is not required bonus points if you have experience with customer service, cashier, cooking, food handling, basic math, drive-thru, safety standards, and fast-food restaurants. Must be at least sixteen (16) years old. Availability to work a flexible schedule, including evenings, weekends, and holidays. Ability to lift, carry, stack, push or pull heavy objects. Stand and walk constantly for entire shifts. Maneuver through compact spaces safely and operate restaurant equipment. What KBP brings to the table: KBP Foods, a part of KBP Brands is a leading restaurant franchise group with a clear vision: to create a great place to work, a great place to eat, and a great place to own. We're looking for dedicated individuals that align with our core values and are passionate about Diversity, Equity, Inclusion, Belonging (DEIB+), Growth Opportunities, and a Positive Culture. Grown to over 1,000 restaurants in 20 years. Opportunities in 32 states Over 50% of store leadership has been promoted internally in the last year. If you are looking to be part of an energetic, entrepreneurial company with countless opportunities for growth - personally, professionally, and financially - then a career with KBP Brands IS the right fit for you. Additional Info: Team Member Employees are entitled to compensation commensurate with skill and experience. The exact compensation will vary based on skills, experience, location, and other factors permitted by law and will be discussed during the hiring process. The expected starting compensation ranges for new hires in this position in various states and jurisdictions are as follows: Salary range: $8.00 to $18.00 per hour for all other geographic areas not listed below State of Maryland: $15.00 to $16.00 per hour State of New York: $15.50 to $16.00 per hour New York City: $16.50 to $17.00 per hour Cincinnati, OH: $10.45 to $15.00 per hour Toledo, OH: $11.00 to $14.00 per hour

** This is a Part Time Position Available Shift Time: 5:00 PM - 9:30 PM Stable and growing organization Pay beginning at $23.35 per hour Quick advancement Professional, positive and people-centered work environment Modern facilities Clean, late model equipment 401(k) plan, Company Match Responsibilities As a Dock Worker, you will load and unload freight in a productive, safe and claims-free manner. Although DFL Dock Workers do not work inside a warehouse, you must maximize space when loading freight. Complete pre and post trip inspections on all dock equipment Properly document all freight control processes Participate in Dayton Freight's training and improvement programs Be available for irregular work schedules, alternating work shifts and/or assignments Adhere to the operational procedures and guidelines contained in the Dayton Freight Driver/Dockworker Manual Qualifications 18 years of age Basic math skills Fluent in English Able to pass a drug screen Benefits Stable and growing organization Pay beginning at $23.35 per hour Quick advancement Professional, positive and people-centered work environment Modern facilities Clean, late model equipment 401(k) plan, Company Match

Pellet Mill Operator, Starting at $16.50 hr Full-Time, Monday - Friday, 1st shift 7:00 am - 4:00 pm Earn 1 week of vacation after 90 days of employment and enjoy an excellent benefits package that includes our very own employee resorts Click here to learn more about our employee resorts R+L Carriers - Women in Trucking Company Culture Energy Pellets of America is currently hiring for a Pellet Mill Equipment Operator at our Wilmington, OH Pellet Shop. Jumpstart your career and expand your professional portfolio at Energy Pellets of America. As the Pellet Mill Operator, you will run the pellet mill, the bagging machine, the shrink wrap equipment, as well as maintain and clean the equipment as needed. Successful candidates for this position must possess a good work ethic, maintain a good attendance record, and work well with others as part of a team. Qualifications: Machine operating experience Computer experience Previous forklift experience Ability to read and count Ability to communicate with the manufacturer of the equipment Ability to lift up to 75lbs Ability to stand on concrete for extended periods of time Able to read a micrometer Must be able to bend, lift and stoop without difficulty Strong attention to detail to ensure accuracy Proactive, self-motivated, and strong ability to multitask Benefits:R+L Carriers offers an excellent compensation and comprehensive benefits package that includes Medical/Dental/Vision Insurance, 401(k) Retirement Plan with company matching contributions, Paid Vacation & Holidays, and vacation lodging at our exclusive employee resorts in Daytona Beach, FL, Big Bear Lake, CA, Pigeon Forge, TN, and Ocean Isle Beach, NC. About Us: R+L Carriers is a family owned, privately held transportation company founded in 1965. Our business caters to the transportation and distribution industry and is designed to provide customers with superior service through efficient administration and innovative thinking. The Company prides itself in treating our employees and customers with respect and honesty. We believe each employee contributes directly to the Company's growth and success. There are many other transportation companies capable of picking up and delivering freight. However, we believed our customers select us because of the efforts of our employees. R+L Carriers Shared Services, LLC (“R+L Carriers”) and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, sexual orientation, gender, gender identity or expression, genetic information, national origin, age, veteran status, disability, or any other status protected by federal or state law. R+L Carriers will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. When completing this application, you may exclude information that would disclose or otherwise reference your race, religion, age, sex, genetic, veteran status, disability or any other status protected by federal or state law. This application is considered current for ninety (90) days only. At the end of this period, if you are still interested in employment, it will be necessary for you to reapply by completing a new application.

The Mill Machinist has the ability to run multiple machines effectively and efficiently on a continuous basis and can identify problems during the production run, position work pieces, and inspect parts on a daily basis using various types of inspection equipment. Job Function: Performs required operations on Multi-Axis Mill and Lathe machines, including loading and unloading of parts, part inspection, tool holder preparation and insert changing; cleans and performs preventive maintenance and minor adjustments of assigned equipment; prepares various logs and records to document machine operation and daily production; enters required data into computer; moves/transports parts to appropriate location as needed; handles parts in a manner to prevent damage; maintains safe, clean and orderly work areas; receives, reviews, and /or refers to various records or reports including travelers, shift reports, SOPs, safety sheets, etc.; prepares labor sheets and non-conformance forms; interacts and communicates with various groups and individuals including the immediate supervisor, co-workers, engineering, and other shop personnel; operates height gage, micrometers, scooter gauges, various power tools, computers, etc.; performs related duties as required. Primary Responsibilities: * Set up and switch jobs as required * Produce effectively and efficiently within standard time allotment * Keep track of materials in the area * Minor maintenance of machine * Maintain an excellent attendance record * Verify all parts are conforming before signing off on traveler * Keep track of all scrap and seek corrective action when necessary * Run and maintain the function of 2+ machines in a manufacturing cell * Maintain all inspection gauges and tooling as required * Function effectively within a team environment * Perform miscellaneous duties and projects as assigned and required * Adhere to AS9100 and other quality standards Requirements: * Must demonstrate a high ability in the area of machining * Must have High School Diploma or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Must have an understanding of the machining process * Must be able to run parts to spec on a daily basis on multiple machines * Must be able to read simple part drawings * Must be able to use and read micrometers, dial calipers, height gage, scooter gages, computers and indicators accurately * Must be able to calculate dimensions and tolerances using knowledge of mathematics * Must be able to follow verbal and written instructions in English * Must be able to clearly communicate information to others verbally and in writing in English * Perform any other task management deems necessary or needed by the company * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: 3 - 5 years' experience in Lathe machining Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. The employee must frequently lift/or move up to 35 pounds, occasionally up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required personal protective equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast-paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, submit resume noting job inquiry ID #605211225 to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

OUR STORY AND HOW YOU CAN HELP CONTRIBUTE Everything But The House (EBTH) is a revolutionary marketplace, making it easier to find or sell secondhand goods, headquartered in Cincinnati, OH. EBTH was born out of a passion for helping people via a full-service approach to consignment; revolutionizing how homeowners, estate managers, dealers and collectors connect with a world of shoppers seeking rare and wonderful things. Each day the global auction platform unleashes an ever-changing assortment of art, jewelry, fashion, collectibles, antiques and more, all with a starting bid of $1. EBTH aspires to be the first stop for secondhand online. We stand behind our work and offer every customer the "EBTH Promise". If we don't uphold our end of the bargain, we'll do our best to make it right. We're seeking a Warehouse Specialist Pick Up who will be responsible for assisting with projects in the warehouse to include: organization of the warehouse; helping to manage changes to and within warehouse processes; supporting areas across production including item processing, packaging, and customer pickup; and helping to develop and maintain processes of inventory management and flow. 7:30am Start Time. Monday, Tuesday, Wednesday, Friday, Saturday. Off Thursday/Sunday As a dynamic company, we move fast and seek to continuously improve - and while this will be a very demanding position, you'll be surrounded by a passionate team of individuals who are dedicated to the common goal of drastically changing the way personal property is sold, bought and moved across the country - and we have a lot of fun while we're doing it. We're proud of our journey and we're eager to share our story with shoppers, clients and consignors across the world! Discover everything uncommon at EBTH.COM. TASKS YOU'LL BE JUGGLING * Greet customers in a professional, friendly, and caring manner at the EBTH warehouse in Blue Ash, OH. * Assist with customer drop off and pick up days at the processing center. * Maximize efficiency and timeliness in order to achieve company-defined KPIs. * Be able to respond appropriately to the questions and challenges posed by internal and external customers (thinking on your feet is a must!). * Help to hone our strategic vision and assist with tactical projects to implement that vision within the warehouse. * Minimize item returns and maximize customer satisfaction by providing necessary item information during the packaging process. * Conduct pull requests, including, but not limited to, return to seller, errors and missing information on items. * Verify inbound shipments and ensure accurate inventory scanning upon receipt of goods. * Align with management to resolve issues relating to the department and to ensure efficient service. * Implement new processes and test technological advancements to help improve internal operations. * Collaborate with other departments, EBTH management, and team members to maximize efficiency and timeliness in order to achieve company defined Key Performance Indicators * Additional tasks and responsibilities as needed. CREDENTIALS WE ARE SEEKING * Drive! This business is fast-paced and challenging. A self-starter is a must! * High school diploma required. * An appreciation for dedicated customer service in a fast-paced work environment. * Familiarity and comfort working with Google Suite. * A team player mentality with an ability to work independently. * Ability to maintain a set production schedule to align with business needs, while being willing to work flexible hours including nights and Saturday's. This position will have a schedule that includes working Saturday's. * Ability to effectively communicate via email, phone, and in person with other employees and with customers. * Knowledge of antiques, artwork, collectibles and unique items, with the ability to gauge value, is a plus. * Ability to move / lift up to 100 lbs. when utilizing proper equipment. * A sense of humor. No, really! We are not providing relocation for this position and are only accepting applications for candidates who are located in Ohio and/or the Cincinnati, OH metropolitan area. We are an equal opportunity employer with a commitment to diversity. All qualified individuals are encouraged to apply. Applicants must be authorized to work lawfully in the United States for EBTH. EBTH does not provide sponsorship at this time.

DSV - Global transport and logistics In 1976, ten independent hauliers joined forces and founded DSV in Denmark. Since then, DSV has evolved to become the world's 3rd largest supplier of global solutions within transport and logistics. Today, we add value to our customers' entire supply chain by transporting, storing, packaging, re-packaging, processing and clearing all types of goods. We work every day from our many offices in more than 80 countries to ensure a steady supply of goods to production lines, outlets, stores and consumers all over the world. Our reach is global yet our presence is local and close to our customers. Read more at *********** Location: USA - Independence, 710 Clymer Ct Division: Solutions Job Posting Title: CVG05 Warehouse Operator Time Type: Full Time POSITION SUMMARY The Warehouse Operator is responsible for operating a forklift and other material handling equipment for the purpose of shipping, receiving, and picking. Activities may include but are not limited to loading or unloading, scanning, moving, staging, replenishing, and stacking product. This individual is also responsible for counting and inspecting product and notifying leadership when there are damages or discrepancies. These Associates are accountable for the safe and efficient operation of all equipment and will be expected to perform all duties as assigned. As part of the DSV team, Associates are expected to meet company objectives in the areas of performance, safety, and quality. Associates are expected to comply with all corporate and site-specific policies. ESSENTIAL DUTIES AND RESPONSIBILITIES Shipping Responsibilities: * The shipping functions include but are not limited to using a gas or electric powered forklift to load outbound shipments, move product, and stack products or materials. * Associates must efficiently and accurately load orders according to the appropriate doors and trailers. * All shipping functions will be processed as defined by the Standard Operating Procedures. Receiving Responsibilities: * The receiving functions include but are not limited to using a gas or electric powered forklift to unload inbound shipments, move product, replenish, stack and store products or materials. * Associates must efficiently and accurately locate and place products in the appropriate storage areas. * All receiving functions will be processed as defined by the Standard Operating Procedures. Picking Responsibilities: * The picking functions include but are not limited to using a gas or electric powered forklift to accurately pick orders to fulfill client demands. * Associates must efficiently and accurately pick products and stage in the appropriate areas. * Associates will stack, package, band, shrink wrap, and label product(s) as determined by client requirements. * All picking functions will be processed as defined by the Standard Operating Procedures. Quality Control Responsibilities: * The quality control functions include but are not limited to using the appropriate documentation to ensure that all products and orders are received, handled, and shipped correctly. * Associates will verify that products and/or orders meet quality standards, including reporting any damages or discrepancies. * Associates will stack, package, shrink wrap, and label product(s). All quality control functions will be processed as defined by the Standard Operating Procedures. Safety, Housekeeping, and Compliance: * All associates are responsible for executing all safety protocols and will accomplish all job tasks in a manner that promotes safety. * Associates are responsible for the cleanliness and orderliness of the facility. Associates must also maintain a clean, neat, orderly work area, and assist in security of the warehouse. * Associates will comply with all Standard Operating Procedures, corporate and site-specific policies, safety rules, and OSHA/MSDS Standards. Equipment Operation: * In performing assigned duties, the equipment used can include but is not limited to: sit-down, stand-up, reach truck, sweeper scrubber, scissor lift, cherry picker, Aisle Master or pallet jack. * Associates are responsible for the upkeep of equipment and reporting of equipment problems. * On a daily basis, associates will inspect and perform minor maintenance on the forklift or other equipment. * Associates will operate all equipment in a safe and efficient manner following prescribed work methods. * Associates must maintain an active forklift certification. Maintenance: * Perform or assist in building, grounds, and equipment maintenance as assigned. OTHER DUTIES * Performs other duties as assigned. * Work overtime as dictated by business whether mandatory or voluntary. SUPERVISORY RESPONSIBILITIES * None MINIMUM REQUIRED QUALIFICATIONS Education and/or Experience * Must have a high school diploma or general education degree (GED). * 6 months experience working in a logistics/distribution/relevant environment. * Able to operate MHE Certificates, Licenses, Registrations or Professional Designations * Satisfactory completion of a forklift training program Other * Must be able to work in unregulated temperatures within the warehouse during the warmer and colder months can range from mild to moderate. SKILLS, KNOWLEDGE AND ABILITIES Computer Skills * Basic computer skills * RF Scanners * WMS functions Language Skills * English (reading, writing, verbal) Mathematical Skills * Basic to intermediate level to verify quantities of product, count inventory, or perform other duties associated with handling, storing, and distributing client products. Other * Strong attention to detail accuracy and accomplish job task in a timely manner. * Ability to perform duties with minimal supervision or guidance. * Must be able to effectively adapt to change and thrive in a stimulating, fast-paced work environment. PREFERRED QUALIFICATIONS * 1-3 years' experience working in a warehouse/logistics/distribution environment * 1-3 years forklift experience. * Current or prior MHE certification PHYSICAL DEMANDS Occasionally * Handling/Fingering, Sitting Frequently * Bending Constantly * Walking and Standing Ability to Lift/Carry and Push/Pull * 21-50 pounds o Reach above shoulder, reach outward, squat, or kneel. WORK ENVIRONMENT While performing the duties of this job, the employee rarely is exposed to fumes or airborne particles, toxic or caustic chemicals. The noise level in the work environment is usually low to moderate. DSV is an equal employment opportunity employer. Candidates are considered for employment without regard to race, creed, color, national origin, age, sex, religion, ancestry, disability, veteran status, marital status, gender identity, sexual orientation, national origin, or any other characteristic protected by applicable federal, state or local law. If you require special assistance or accommodation while seeking employment with DSV, please contact Human Resources at *************. If you are interested in learning the status of your application, please note you will be contacted directly by the appropriate human resources contact person if you are selected for further consideration. DSV reserves the right to defer or close a vacancy at any time. DSV - Global transport and logistics Working at DSV means playing in a different league. As a global leader in transport and logistics, we have been on an extraordinary journey of growth. Let's grow together as we continue to innovate, digitalise and build on our achievements. With close to 160,000 colleagues in over 90 countries, we work every day to offer solid services and meet our customers' needs and help them achieve their goals. We know that the best way to achieve this is by bringing in new talent, fresh perspectives and ambitious individuals like you. At DSV, performance is in our DNA. We don't just work - we aim to shape the future of logistics. This ambition fuels a dynamic environment built on collaboration with world-class team players, accountability and action. We value inclusivity, embrace different cultures and respect the dignity and rights of every individual. If you want to make an impact, be trusted by customers and grow your career in a forward-thinking company - this is the place to be. Start here. Go anywhere Visit dsv.com and follow us on LinkedIn and Facebook. open/close Print Share on Twitter Share on LinkedIn Send by email

**Computerized Machine Operator** **Working at our Beavercreek Site** : GE Aerospace operations have been part of the Beavercreek community for over 70 years! Our Beavercreek facility manufactures gas turbine tubes, ducts, and manifolds, and also has complex machining, fabrication and investment casting capabilities. Product engineering, new product development and testing is performed on site. This facility also does repair and overhaul of tubes, ducts, and manifolds. We have been awarded OSHAS's highest safety rating. **Role Overview:** + Set up, operate, edit, and program a variety of computerized machines, such as Furnaces, Lasers, Robots, Coherent General (8-Axis), Presses and/or Benders to customers' specifications and drawing requirements. + Test new tooling and/or dies and makes recommendations for modifications. + Perform regular preventative maintenance and ensure tools are accurately calibrated prior to use + Operate machine(s) in a prescribed safe manner. + Train and work with all areas of the Cell to run other processes as needed. + Will use a computer daily (checking email, viewing/downloading shop drawings and instructions) **The Ideal Candidate:** + Education or experience in programming and operations in programmable controllers + Team Player and willing to operate in a professional environment + Takes Pride in the work they are doing + Excellent attendance and punctuality history and availability to work overtime as needed + Able to work effectively when receiving general supervision (This involves performing routine assignments alone.) + Able to carry out operations according to set procedures or sequences. + Makes decisions based on experience & available data + Strives to meet or exceed job requirements + Ability to receive and act on constructive feedback **Required Qualifications:** + High School graduate or equivalent + A minimum of six months experience in Manufacturing, Mechanical or Technical Trades, or equivalent relevant work history **Preferred Qualifications:** + Understanding or ability to learn the use of measuring gauges such as manual calipers and micrometers. + Ability to read and interpret blueprints + Ability to exert 10 pounds of force frequently. May occasionally exert 20 to 50 pounds of force (with assistance, if needed). + Ability to stand up to 8 hours/day **Additional Information:** + Wages are $22.75 + per hour based on experience. + Additional $1.50 Premium Pay for 2nd shift!! + You'll be operating and working around moving machines - stand-up forklifts, mobile carts, cranes, etc. Due to normal machining operations there may be dust, fumes, or smoke (not over OSHA Permissible Exposure Levels (PEL)). + In addition to sitting and standing while operating equipment, some activities may require standing in one place for long periods, walking around, or climbing stairs. **Closing:** We strive to keep a fun and enjoyable shop atmosphere while maintaining the highest level of quality work output. We work together to make the impossible happen and we are looking for people like YOU to join us! We're looking for team-oriented individuals with the ability to share ideas and make recommendations with peers and leadership. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Under direct or close supervision, follow established procedures and guidelines to receive, handle, store, perform system transactions and dispatch goods in a factory or warehouse. Receive incoming goods; check for damage and for discrepancies between goods and invoices. Accurately sort, label, and store goods; arrange storage to optimize warehouse space. Pick, pack, and dispatch outgoing goods according to written or verbal requests or orders. This position may require licensing for compliance with export controls or sanctions regulations. Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures & regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality Follows all applicable standard work, work instruction/process documentation and established quality procedures. Raises issues to minimize cost and quality exposures. Performs quality checks for damage and for discrepancies between goods and invoices. Identifies and controls non-conforming material. Delivery Receive incoming goods, accurately sort, label/package, store goods and arrange storage to optimize warehouse space. Operates manual and automated equipment to pick, pack and ship product per the customer expectations. Demonstrates a high level of competency in core work skills. Works at the required cycle time or defined engineering standard. Teamwork Communicates effectively with the assigned team and with all support teams. Completes training in line with business requirements. Participates actively in ways to improve quality, safety, process, material flow, and employee development. Maintains clean and orderly work area, including routine housekeeping tasks and machine cleaning tasks and performs planned operator care and maintenance tasks. Remains flexible and performs other miscellaneous duties, as required, to meet business goals. Works with peers, skilled trades and support staff to maintain and identify equipment in need of repair.

Dock Workers are responsible for loading and unloading trailers for the purpose of transporting a wide variety of cargo, moving cargo, driving a forklift, or using a pallet jack or other freight for transit. Effectively and efficiently operating mobile technology and completing all required paperwork. Responsibilities * Effectively operate mobile technology. * Load and unload trailers for the purpose of transporting a wide variety of cargo. * Actual duties and schedule may vary depending on terminal location. * Equipment - Preventive Maintenance Program for all ABF equipment. * Move cargo, drive a forklift or use a pallet jack or other freight handling equipment. * Prepare wide varieties of freight for transit. * Complete all required paperwork. Requirements Additional Requirements: * This is a casual position and employee must be willing to work evenings, weekends, and on an as-needed basis. * Minimum 18 years of age. * Have a stable work record. * Have a good safety record. * Previous forklift experience required. * Be able to pass pre-employment drug screen and post-offer company physical. * Shift days and hours required for this position vary by location and may include days, nights, and/or weekends. Being able to work the required hours at this location will be considered a minimum requirement. Other Details Work Hours: * Schedule may vary depending on Service Center location. Travel Requirements: * Minimal (0-25%) Compensation: * This is a hourly position paid weekly. About Us ABF Freight , an ArcBest company, is one of the nation's largest, most trusted less-than-truckload carriers. With over a century of experience, 240 service centers spanning North America, and an unwavering commitment to quality, safety and customer service, ABF offers best-in-class LTL transportation for companies of all sizes and industries. We're driven for excellence. An Equal Opportunity Employer including Vet/Disability

Forklift Operator We are currently seeking Material Handlers/Forklift Operators in Erlanger, KY. If you are a safety conscious individual who wants to showcase your industrial skills in an ideal work environment and have the opportunity for a career, we have the opportunity for you. Skills you will need are as follows: Load/unload trucks and verify accuracy of items on manifest Operate material handling equipment Identify, hold and segregate defective or damage material Complete paperwork per work instructions as required Felons are encouraged to apply!

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customer's needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.).Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: * HS diploma or GED preferred. * At least two years of work experience, preferably in an outdoor environment. * One year of loader or forklift experience, certification preferred. * Excellent customer service attitude and skills. * Excellent communication skills, written and verbal. * Positive attitude/High Integrity. * Ability to operate heavy equipment. * Must be able to multi-task in a fast-paced environment. * Strong attention to detail. * Occasional O.T. as needed. * Bilingual skills a plus. Pay $21.05 - $23.71 per hour Benefits Summary: * Medical/Dental/Vision * 401k plus a company match * ESPP - Employee Stock Purchase Plan * EAP - Employee Assistance Program (no cost to you) * Vacation & Sick pay * Paid Company Holidays * Life and AD&D Insurance * Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: * E-verify Participation * Right to Work

Line of Business: RMC About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing * Operate loader to transport materials safely and efficiently. * Perform routine maintenance and inspections on equipment. * Load and unload materials as required. * Ensure compliance with safety regulations and company policies. * Perform other job responsibilities as assigned by management. What Are We Looking For * Be able to read, write, and speak English. * High school diploma preferred. * Bilingual a plus. * Flexibility to work in various weather conditions. * Commitment to safety and operational excellence. Conditions of Employment * Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. * Some positions require FMCSA regulated ongoing drug and alcohol testing. Work Environment * Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer * $20.00 to $23.00 per hour * 401(k) retirement savings plan with an automatic company contribution as well as matching contributions * Highly competitive benefits programs, including: * Medical, Dental, and Vision along with Prescription Drug Benefits * Health Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) * AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance * Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled

This is a Part Time Position Available Shift Time: Monday - Friday | 23:00 - 04:30 * Stable and growing organization * Pay beginning at $23.35 per hour * Quick advancement * Professional, positive and people-centered work environment * Modern facilities * Clean, late model equipment * 401(k) plan, Company Match Responsibilities As a Dock Worker, you will load and unload freight in a productive, safe and claims-free manner. Although DFL Dock Workers do not work inside a warehouse, you must maximize space when loading freight. * Complete pre and post trip inspections on all dock equipment * Properly document all freight control processes * Participate in Dayton Freight's training and improvement programs * Be available for irregular work schedules, alternating work shifts and/or assignments * Adhere to the operational procedures and guidelines contained in the Dayton Freight Driver/Dockworker Manual Qualifications * 18 years of age * Basic math skills * Fluent in English * Able to pass a drug screen Benefits * Stable and growing organization * Pay beginning at $23.35 per hour * Quick advancement * Professional, positive and people-centered work environment * Modern facilities * Clean, late model equipment * 401(k) plan, Company Match

Pellet Mill Operator, Starting at $16.50 hr Full-Time, Monday - Friday, 1st shift 7:00 am - 4:00 pm Earn 1 week of vacation after 90 days of employment and enjoy an excellent benefits package that includes our very own employee resorts Click here to learn more about our employee resorts R+L Carriers - Women in Trucking Company Culture Energy Pellets of America is currently hiring for a Pellet Mill Equipment Operator at our Wilmington, OH Pellet Shop. Jumpstart your career and expand your professional portfolio at Energy Pellets of America. As the Pellet Mill Operator, you will run the pellet mill, the bagging machine, the shrink wrap equipment, as well as maintain and clean the equipment as needed. Successful candidates for this position must possess a good work ethic, maintain a good attendance record, and work well with others as part of a team. Qualifications: Machine operating experience Computer experience Previous forklift experience Ability to read and count Ability to communicate with the manufacturer of the equipment Ability to lift up to 75lbs Ability to stand on concrete for extended periods of time Able to read a micrometer Must be able to bend, lift and stoop without difficulty Strong attention to detail to ensure accuracy Proactive, self-motivated, and strong ability to multitask Benefits:R+L Carriers offers an excellent compensation and comprehensive benefits package that includes Medical/Dental/Vision Insurance, 401(k) Retirement Plan with company matching contributions, Paid Vacation & Holidays, and vacation lodging at our exclusive employee resorts in Daytona Beach, FL, Big Bear Lake, CA, Pigeon Forge, TN, and Ocean Isle Beach, NC. About Us: R+L Carriers is a family owned, privately held transportation company founded in 1965. Our business caters to the transportation and distribution industry and is designed to provide customers with superior service through efficient administration and innovative thinking. The Company prides itself in treating our employees and customers with respect and honesty. We believe each employee contributes directly to the Company's growth and success. There are many other transportation companies capable of picking up and delivering freight. However, we believed our customers select us because of the efforts of our employees. R+L Carriers Shared Services, LLC (“R+L Carriers”) and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, sexual orientation, gender, gender identity or expression, genetic information, national origin, age, veteran status, disability, or any other status protected by federal or state law. R+L Carriers will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. When completing this application, you may exclude information that would disclose or otherwise reference your race, religion, age, sex, genetic, veteran status, disability or any other status protected by federal or state law. This application is considered current for ninety (90) days only. At the end of this period, if you are still interested in employment, it will be necessary for you to reapply by completing a new application.

SummaryJob Description Computerized Machine Operator Working at our Beavercreek Site: GE Aerospace operations have been part of the Beavercreek community for over 70 years! Our Beavercreek facility manufactures gas turbine tubes, ducts, and manifolds, and also has complex machining, fabrication and investment casting capabilities. Product engineering, new product development and testing is performed on site. This facility also does repair and overhaul of tubes, ducts, and manifolds. We have been awarded OSHAS's highest safety rating. Role Overview: Set up, operate, edit, and program a variety of computerized machines, such as Furnaces, Lasers, Robots, Coherent General (8-Axis), Presses and/or Benders to customers' specifications and drawing requirements. Test new tooling and/or dies and makes recommendations for modifications. Perform regular preventative maintenance and ensure tools are accurately calibrated prior to use Operate machine(s) in a prescribed safe manner. Train and work with all areas of the Cell to run other processes as needed. Will use a computer daily (checking email, viewing/downloading shop drawings and instructions) The Ideal Candidate: Education or experience in programming and operations in programmable controllers Team Player and willing to operate in a professional environment Takes Pride in the work they are doing Excellent attendance and punctuality history and availability to work overtime as needed Able to work effectively when receiving general supervision (This involves performing routine assignments alone.) Able to carry out operations according to set procedures or sequences. Makes decisions based on experience & available data Strives to meet or exceed job requirements Ability to receive and act on constructive feedback Required Qualifications: High School graduate or equivalent A minimum of six months experience in Manufacturing, Mechanical or Technical Trades, or equivalent relevant work history Preferred Qualifications: Understanding or ability to learn the use of measuring gauges such as manual calipers and micrometers. Ability to read and interpret blueprints Ability to exert 10 pounds of force frequently. May occasionally exert 20 to 50 pounds of force (with assistance, if needed). Ability to stand up to 8 hours/day Additional Information: Wages are $22.75 + per hour based on experience. Additional $1.50 Premium Pay for 2nd shift!! You'll be operating and working around moving machines - stand-up forklifts, mobile carts, cranes, etc. Due to normal machining operations there may be dust, fumes, or smoke (not over OSHA Permissible Exposure Levels (PEL)). In addition to sitting and standing while operating equipment, some activities may require standing in one place for long periods, walking around, or climbing stairs. Closing: We strive to keep a fun and enjoyable shop atmosphere while maintaining the highest level of quality work output. We work together to make the impossible happen and we are looking for people like YOU to join us! We're looking for team-oriented individuals with the ability to share ideas and make recommendations with peers and leadership. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Job DescriptionForklift Operator We are currently seeking Material Handlers/Forklift Operators in Erlanger, KY. If you are a safety conscious individual who wants to showcase your industrial skills in an ideal work environment and have the opportunity for a career, we have the opportunity for you. Skills you will need are as follows: Load/unload trucks and verify accuracy of items on manifest Operate material handling equipment Identify, hold and segregate defective or damage material Complete paperwork per work instructions as required Felons are encouraged to apply! Powered by JazzHR 9UBJp6FtEd

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customer's needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.).Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: HS diploma or GED preferred. At least two years of work experience, preferably in an outdoor environment. One year of loader or forklift experience, certification preferred. Excellent customer service attitude and skills. Excellent communication skills, written and verbal. Positive attitude/High Integrity. Ability to operate heavy equipment. Must be able to multi-task in a fast-paced environment. Strong attention to detail. Occasional O.T. as needed. Bilingual skills a plus. Pay $21.05 - $23.71 per hour Benefits Summary: · Medical/Dental/Vision · 401k plus a company match · ESPP - Employee Stock Purchase Plan · EAP - Employee Assistance Program (no cost to you) · Vacation & Sick pay · Paid Company Holidays · Life and AD&D Insurance · Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

This is a Part Time Position Available Shift Times: 5:00 AM - 10:00 AM * Stable and growing organization * Pay beginning at $23.35 per hour * Quick advancement * Professional, positive and people-centered work environment * Modern facilities * Clean, late model equipment * 401(k) plan, Company Match Responsibilities As a Dock Worker, you will load and unload freight in a productive, safe and claims-free manner. Although DFL Dock Workers do not work inside a warehouse, you must maximize space when loading freight. * Complete pre and post trip inspections on all dock equipment * Properly document all freight control processes * Participate in Dayton Freight's training and improvement programs * Be available for irregular work schedules, alternating work shifts and/or assignments * Adhere to the operational procedures and guidelines contained in the Dayton Freight Driver/Dockworker Manual Qualifications * 18 years of age * Basic math skills * Fluent in English * Able to pass a drug screen * Legally eligible to work in the United States Benefits * Stable and growing organization * Pay beginning at $23.35 per hour * Quick advancement * Professional, positive and people-centered work environment * Modern facilities * Clean, late model equipment * 401(k) plan, Company Match

**Computerized Machine Operator** **Working at our Beavercreek Site** : GE Aerospace operations have been part of the Beavercreek community for over 70 years! Our Beavercreek facility manufactures gas turbine tubes, ducts, and manifolds, and also has complex machining, fabrication and investment casting capabilities. Product engineering, new product development and testing is performed on site. This facility also does repair and overhaul of tubes, ducts, and manifolds. We have been awarded OSHAS's highest safety rating. **Role Overview:** + Set up, operate, edit, and program a variety of computerized machines, such as Furnaces, Lasers, Robots, Coherent General (8-Axis), Presses and/or Benders to customers' specifications and drawing requirements. + Test new tooling and/or dies and makes recommendations for modifications. + Perform regular preventative maintenance and ensure tools are accurately calibrated prior to use + Operate machine(s) in a prescribed safe manner. + Train and work with all areas of the Cell to run other processes as needed. + Will use a computer daily (checking email, viewing/downloading shop drawings and instructions) **The Ideal Candidate:** + Education or experience in programming and operations in programmable controllers + Team Player and willing to operate in a professional environment + Takes Pride in the work they are doing + Excellent attendance and punctuality history and availability to work overtime as needed + Able to work effectively when receiving general supervision (This involves performing routine assignments alone.) + Able to carry out operations according to set procedures or sequences. + Makes decisions based on experience & available data + Strives to meet or exceed job requirements + Ability to receive and act on constructive feedback **Required Qualifications:** + High School graduate or equivalent + A minimum of six months experience in Manufacturing, Mechanical or Technical Trades, or equivalent relevant work history **Preferred Qualifications:** + Understanding or ability to learn the use of measuring gauges such as manual calipers and micrometers. + Ability to read and interpret blueprints + Ability to exert 10 pounds of force frequently. May occasionally exert 20 to 50 pounds of force (with assistance, if needed). + Ability to stand up to 8 hours/day **Additional Information:** + Wages are $22.75 + per hour based on experience. + Additional $1.50 Premium Pay for 3rd shift!! + You'll be operating and working around moving machines - stand-up forklifts, mobile carts, cranes, etc. Due to normal machining operations there may be dust, fumes, or smoke (not over OSHA Permissible Exposure Levels (PEL)). + In addition to sitting and standing while operating equipment, some activities may require standing in one place for long periods, walking around, or climbing stairs. **Closing:** We strive to keep a fun and enjoyable shop atmosphere while maintaining the highest level of quality work output. We work together to make the impossible happen and we are looking for people like YOU to join us! We're looking for team-oriented individuals with the ability to share ideas and make recommendations with peers and leadership. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.