Welder jobs in Abilene, TX - 950 jobs

Full-time Description Main Purpose: To perform job functions required and assigned in the fabrication of structural/piping materials per the contract/job specifications and quality assurance requirements/fitting procedures and established ISO/QC program standards. The Welder's job duties are to properly weld structure or pipe to construct a drilling deck. This position is located Offshore in the Gulf of America, formerly known as the Gulf of Mexico. Essential Functions: Set and operate welding machine for applicable welding processes Perform welding processes assigned for structural, pipe, and welding projects Pass required welding test per AWS D1.1 latest edition, ASME section IX, and API 1104 Maintain quality of welding that can pass NDT testing procedures Perform welding assignments safely and efficiently, always practicing safety Operate appropriate hand tools (chipping hammers, grinders, etc.) Weld separately or in combination, using aluminum, stainless steel, cast iron, carbon steel, and other alloys Select and install torches, torch tips, filler rods, and flux according to welding chart specifications or any thickness of metals Determine required equipment and welding methods, applying knowledge of welding techniques Connect and turn regulator valves to activate and adjust gas flow and pressure to obtain desired flames Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking distortion, or expansion of the material Expertly weld small, medium, and large structural and pipes of various metals and alloys Expertly weld small, medium, and large structural items Weld structure (beams, grating, stairways) and pipe Assist with building a scaffold to access all areas on structure, pipe, or deck Pull up leads to weld on deck Transport welding equipment in the yard to the work area Perform other duties assigned by supervisor Benefits Offered: Earned Wage Access Health, Dental, and Vision Insurance 401(k) with Company Match Paid Holidays Paid Vacation Life Insurance Disability Insurance Safety Awards Company Store Employee Assistance Program (EAP) Requirements Physical Requirements: Standing, sitting, walking, stooping, kneeling, climbing, feeling, talking, hearing and seeing Turning, twisting, bending, and balancing Pushing, pulling and reaching Must be able to lift and/or move up to 25 pounds and occasionally 50-75 pounds Job Requirements: Must successfully demonstrate the ability to pass a practical welding test: 6G SMAW and 6GR SMAW and 6GR FCAW 2+ years of Offshore experience Must be able to pass pre-employment physical and drug screen Must be able to pass a background check Ability to communicate effectively, both verbally and in writing Valid TWIC card Desirable Experience, Education, and Training: Highschool diploma or GED Experience with 6G and 6GR -SMAW and FCAW welding Tools, Equipment, and Technology: Welders must know and use: welding machines, man lifts, chipping & grinding equipment, cutting torches, welding leads, welding whips, and welding guns All appropriate safety equipment used to perform their everyday welding duties (welding shields, goggles, hard hats, etc.) Environmental Conditions: 80 to 90% of the work activities are performed outdoors. Individuals will be required to work in changes of temperature, hot, cold, humid, wet, and dry conditions, dust, mud, etc. Individuals may also be exposed to fumes (Paint, paint thinners, diesel, /or gas, etc.) Gulf Island will not sponsor applications for work visas. Additionally, applicants for employment with Gulf Island must be currently authorized to work in the United States on a full-time basis. Accordingly, Gulf Island will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Gulf island is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Gulf Island employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Gulf Island. No recruiting placement fee will be paid in the event Gulf Island hires the candidate due to the referral or through other means.

Job Description Are you a talented welder looking to travel and work on exciting projects across the country? Tanco Engineering wants to hear from you! With over 40 years in the industry, we're proud of our reputation for safety, reliability, and excellence. As a Storage Tank Welder with us, you'll play a critical role in ensuring the quality and safety of storage tanks. You'll join a friendly team that values your skills and contributions while giving you the chance to work in varied locations, meeting new people, and tackling interesting challenges. At Tanco Engineering, we believe in teamwork and open communication. You won't just be a number; you'll be a valued part of our family. So, if you're ready for an opportunity to shine, let's make it happen! Position Duties: Utilize your welding skills to ensure the structural integrity of storage tanks through various techniques like stick and flux core welding. Read and interpret blueprints to ensure your welding tasks meet all specifications. Inspect your work for quality control, promptly addressing any issues you may uncover. Work alongside your team to ensure projects are completed efficiently and on time. Maintain a safe work environment by following all safety protocols. Keep your welding equipment in top shape with routine maintenance and troubleshooting as needed. Requirements At least a year of welding experience, ideally in the storage tank industry. Attention to detail with a skill for spotting potential defects. A willingness to lift heavy equipment and engage in physically demanding tasks. Strong communication abilities coupled with a collaborative spirit. A passion for travel and the flexibility to work in various locations. A TWIC card might be required Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Background checks will also be included in the hiring procedure. Must be over 18 and eligible to work in the United States. Benefits Medical, dental, & vision insurance Retirement plan & ESOP Competitive pay with annual reviews. Join our team and enjoy competitive starting pay of $30-$34 per hour, which may vary depending on your experience and the results of your welding test. In addition to the attractive pay range, we offer a subsistence allowance of $125 (exceptions may apply per location) and reimbursement of $0.70 per mile for travel (when applicable).

ABOUT THE TEPA COMPANIES Established in 2005 and owned by the Paskenta Band of Nomlaki Indians, The Tepa Companies deliver comprehensive and sustainable solutions to federal, state, local, and private-sector clients throughout the United States. The tribally owned companies work independently and collaboratively to provide wide-ranging construction, engineering, environmental, industrial, staffing, and technology services. When you join Tepa Companies, you have the opportunity to expand your entrepreneurial skill set while growing professionally alongside the best in the industry. You will have the opportunity to impact your team, the organization as a whole, and subsequently, our Tribe. We seek out top talent to provide the best services for our clients. We focus on being a responsible company for our employees and their families by creating a culture that reflects our core values and offering competitive pay and benefits package. Our benefits package includes comprehensive medical, dental, vision, generous paid time off and holidays, 401(k) plan with company match, life insurance, flexible spending and health savings account, mental health support and resources, short and long-term disability, and tuition reimbursement. LOCATION: This is a nationwide traveling position requiring frequent travel to project sites across the United States. Per diem will be provided. ABOUT THE JOB The Tepa Companies are seeking a Welding Apprentice who will Perform welding tasks under supervision on piping and plate within petroleum operations facilities. In addition to welding, the successful candidate must be able to assist in tasks related to welding such as fit‐up, preparation, repair, inspection, and post weld preparation. As required, the Apprentice Welder will also be tasked to assist with general site work such as loading and unloading equipment and materials, site clean‐up and preparation, mobilization, and demobilization to and from the jobsite, scaffolding erection, general tank construction tasks and other duties as assigned. This role is intended for May 2026 college graduates who majored in an applicable field. As Tepa continues to grow, we are focusing on hiring recent graduates to begin their careers at our organization with opportunities to receive hands-on learning, mentorship, and growth within the company. This is an entry-level position that does not require previous experience but does require completed education in the particular discipline. Job Functions: * Follow welding procedure specifications when welding * Train and assist with performing quality welds able to pass radiographic examination * Train and assist with performing quality welds using various welding process, such as TIG, GMAW, SMAW, FCAW, etc. * Train and assist with producing quality welds with efficiency * Train to perform or assist with fit‐up and preparation of welds * Perform or assist with post weld cleanup, inspection, and repair * Communicate regularly with the Field Foreman regarding issues and concerns on the job site * Train to determine the required tools, materials and welding methods based on the project specifications * Assist with the assembly, installation, and repair of pipe components and systems according to specifications * Inspect all materials, equipment, and tools required to perform the work * Maintain supplies, equipment, and tools * Properly prepare materials by clamping, cutting, or applying chemical solutions to piping * Observe all safety regulations WHAT WE'RE LOOKING FOR * High School diploma or GED * Formal vocational/technical training in GTAW- Gas tungsten arc welding and basic welding processes/procedures * Must be graduating in 2026 from vocational training (May/June graduates preferred) * Must be able to pass a multi-position weld test utilizing the SMAW process * Must be able to pass 2 and 3G plate welding tests * Must be able to perform stick welds on both carbon and stainless-steel plate and pipe * Must be able to utilize large weld rods (3/16" minimum) in multi-positions in an effective and efficient manner * Ability to learn to read and interpret blueprints, schematics, and written instructions * Must have a general knowledge of AWS, API, ANSI, and ASME codes and standards * Must be able to troubleshoot and have a strong attention to detail * Must have physical dexterity * Must be able to follow verbal directions * Must be able to read and write in English * Must be willing to travel for long durations * Must be able to pass a background check required to access US military installations * Must have a valid driver's license Equal Opportunity Employer Veterans

IS LOCATED IN COLUMBUS, TX WELDER/FITTER BENEFITS: Titan offers: Competitive pay Medical benefits available on day one (1) of your employment 10paid vacation days, 10 paid holidays 3 paid personal days 401(K) Great working environment Position Summary: Responsible for completing routine welding and fitting assignments within clearly defined processes while working under moderate supervision. PIPE WELDER/FITTER Uses metal core mig, fluxcore, subarc, tig or stick welding processes (must pass two or more) Reads and understands P & ID drawings and other package layout drawings to determine appropriate welding process May weld brackets and braces and use grinders. May position pieces to be welding into jigs, holding fixtures, guides and steps using measuring instruments and hand tools. May perform position welds on code materials Proficient in flame and plasma cutting torches Be able to read and understand blueprints and perform own fit-up Must be able to operates basic cutting equipment May layout and mark weld points on parts or subassemblies using rule, square, scribe or templates Positions pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools Works with different types and sizes of structural materials Inspects complete welds to determine structural soundness Operates cutting equipment Safely operates iron worker, overhead cranes, rigging, pipe threading machine, welding machine, tube bending machine, and various pneumatic hand tools Assembly of components with some fabrication of equipment needed for the job Required Test: Must be able to pass a 6G weld test; vessel or pipe Must be able to pass a written fitters exam Preferred Education and Experience: High school diploma or equivalent or equal combination of education and experience Must have five (5) years related experience and/or training; welding school or on the job training Knowledge of different types and sizes of pipe and vessel material Physical Strain: Lifting up to 50 pounds with frequent lifting and/or carrying objects weighing up to 30 pounds Bending, squatting, climbing, pulling, stooping, twisting, reaching, working at elevated heights

Come grow with us! Broadwind Heavy Fabrications has several opportunities to join our team in Abilene, TX as a Welder! We offer a variety of multi-step weld positions across multiple shifts! Our Welders fabricate and weld steel structures and components to customer specifications utilizing applicable WPS (Welding Procedure Specifications) and work instructions. Grinding is part of the weld process for certain positions. Ability to read blue prints is critical! Currently the positions we have open are on B-Shift (nights with OT and shift differential - see below) and C-Shift (weekend with opportunity for OT and shift differential - see below): B-Shift: 6 pm to 6 am Monday through Thursday ($2/hr Shift Diff) C-Shift: 6 am to 6 pm Friday through Sunday ($4.50/hr Shift Diff) Job titles include: * -Sub Arc Welders: submerged arc welding * -Clip and Clean: grind welds to customer specifications; fit and weld clips and bosses for internals. Academic/Experience/Credentials/Certifications: * High school diploma or GED required. * 6+ months of welding experience or, completion of a welder's training program or equivalent combination of education and experience. * Overhead crane experience after certification (can be completed after hire). * Candidate must be able to pass a Jaeger J2 vision test. * Must be able to pass new hire drug tests as well as periodic random screens. Specialized Skills/Knowledge/Ability: * Must be able to complete and pass weld qualification test(s). * Able to read and follow all weld training and certification information. * Ability to read blueprints is a must.

Petrosmith a leading provider of production equipment for the oil and gas industry is currently looking for experienced Vessel and Piping Welders to join our team. Our Fabrication Shop specializes in Vessels used in the Oilfield Industry. Welders will be responsible for welding pressure vessels experience is required must be able to pass a 6G or 3G weld test. Responsibilities: Interprets drawings and specifications Welds carbon steel and components using weld procedures Fit-up ANSI flanges to pipe, forged flanges to shells and profile nozzles to match required shell. Lay-out nozzles and other sub assembly location in shell components Burns and grinds nozzle cutouts in shell to meet engineering tolerances Uses flame cutting torch, carbon arc gouging, plasma arc, portable grinders and other tools. Uses overhead cranes, jib cranes and other lifting/ rigging devices to move components in a safe manner. Completing jobs based on standard shop procedures Conforms to shop quality practices and procedures Conforms to safety requirements of the shop Works productively with others to help determine best solutions Other duties as assigned Qualifications: Proficient in basic math including addition/ subtraction of whole numbers, fractions and decimals Proficient in reading a tape measure/ rulers in increments of 1/16” Ability to read blue prints Ability to understand manufacturing sequence in a vessel fabrication shop Ability to use various welding, grinding and fitting tools Ability to follow shop procedures, quality procedures and safety practices. Ability to pass 6G or 3G welding test Requires pressure vessel shop fabrication experience Ability to lift materials job components up to 50 pounds Ability to arrive to work on time Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Employee discount Flexible spending account Health insurance Life insurance Paid time off Referral program Vision insurance Shift: 10 hour shift Ability to commute/relocate: Mineral Wells, TX 76067: Reliably commute or planning to relocate before starting work (Preferred) Experience: Welding: 3 years (Preferred) Work Location: In person

**Requisition ID: 177926** Perform work involving a high degree of precision and the use of hand welding equipment and proficiency in welding processes for both structural and process pipe applications **Experience Level** Intermediate **Primary Responsibilities and Duties** - Set-up, troubleshoot and operate welding machines according to job specifications and welding procedures - Preheat and weld metal components as specified by blue prints, welding symbols, job specifications, or welding procedures. - Weld various processes FCAW-S, FCAW-G, TGAW, GMAW, SMAW, and SAW - Operate air arc gouger, grinder, stress relieving machine, and other industry machines, tools and equipment - Make welding repairs and substandard welds **Qualifications** -May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. -Must possess working knowledge skills and abilities for position. -Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision. -Ability to use hand tools, power tools and layout tools safe and efficiently. **Requirements** -Able to meet all physical requirements. -Must have all required tools -Expected to climb and work at heights and in confined spaces (may exceed 200 ft) -Able to work outdoors in all weather conditions -Able to work overtime, nights, and weekends as required by the workload -Observe and comply with all safety and project rules. Performs other duties as required. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC_Craft

Job Description Job Opportunity: Pipe Welder Join the skilled team at Evers & Sons Inc., a leader with over 40 years in the construction and energy sectors. We are seeking an experienced Pipe Welder to perform specialized welding in our fabrication shop. This role involves precision welding tasks, ensuring the integrity and safety of our projects. If you are committed to excellence and skilled in various welding techniques, we invite you to apply. Key Responsibilities: Perform pipe welding tasks using TIG, MIG, and Stick welding techniques on various metals, ensuring all work meets company standards and project specifications. Read, interpret, and execute complex mechanical drawings and specifications for pipe installations. Set up, operate, and maintain welding equipment, adjusting settings for different jobs and materials. Inspect and test welds and structures to ensure conformance with Evers & Sons' standards and regulatory requirements. Mentor and train junior welders, promoting best practices in welding and safety. Qualifications: High school diploma or GED required; technical training or certification in welding highly preferred. Minimum of 5 years of experience in pipe welding, particularly in a fabrication shop setting. Proficient in reading and interpreting mechanical drawings and welding symbols. Strong understanding of safety protocols and the ability to work in compliance with all health and safety regulations. Certifications in AWS, CWI, or similar relevant to pipe welding are advantageous. Additional Requirements: Must pass a pre-employment welding test, background check, and drug screening. Ability to follow complex instructions and work under minimal supervision. Willing to work overtime and weekends as required by project demands. Physically capable of handling heavy materials and standing for extended periods. What We Offer: Competitive salary and benefits package including health, dental, vision, and 401(k). Opportunities for professional growth and certification renewal support. A commitment to safety and quality in a dynamic work environment. Evers & Sons Inc. is an Equal Opportunity Employer. We value a diverse workforce and provide a discrimination-free workplace. We encourage all qualified individuals to apply, regardless of race, color, religion, sex, national origin, disability status, or any other protected characteristic.

YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Must be able to pass aluminum welding certification tests Performs related tasks such as thermal cutting and grinding Repairs broken or cracked parts, fills holes, and increases size of metal parts Locates and repairs cracks in products and equipment Maintains clean work area Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears Determines layouts and welds parts and assemblies according to engineering drawings and specifications May monitor and verify quality in accordance with statistical process or other control procedures Trains less experienced employees to build quality products within the time standard Participates in continuous improvement meetings, and shares knowledge for improvement actions Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation Interacts with employees and managers across the company May need to operate a vehicle or forklift Work done with minimal supervision Work may be done without established procedures Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Must know shop mathematics through geometry Ability to read and interpret complex prints Good eye/hand coordination Basic computer skills Must have the ability to follow written and verbal instructions Must have the ability to follow safety practices Basic problem-solving skills Ability to learn how to use necessary computer tools Visual attention to detail Reliable hand strength and manual dexterity Three (3) years directly related work experience or two (2) years of concentrated welding training. High school Diploma or GED required, AA in welding. Able to lift to a maximum of 25-40 lbs. Able to sit/stand for long periods of time. Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Be Transformational! Do you have a desire to work in an environment where you are helping others and changing lives? As an Instructor at TSTC, you can help improve the quality of many lives by sharing your experience and skills with our students. Launch your career with TSTC by connecting with our Talent Acquisition team by emailing us at ***********************. What We Offer You: * More than just a job but the start of a rewarding and fulfilling career * Supportive environment where employee growth and success are promoted and celebrated * Paid vacation, sick time & paid holidays, including an extended holiday break * You will enjoy the stability of the State of Texas' comprehensive health and retirement benefits, competitive wages, State of Texas employee discounts, and much, much more. Follow the links below for additional details: TSTC Benefits TSTC Retirement Plans Employee Discount Program Job Description: TSTC faculty deliver approved curriculum, content, and assessments in an applied learning environment. Responsibilities include facilitation of activities and discussions that engage a range of learning styles with targeted guidance and mentorship to students. Faculty will also interpret and administer assessments, and offer constructive feedback to support student growth and learning outcomes. A key part of the role is to integrate technology effectively to enrich the educational experiences. Faculty act as ambassadors for their programs and TSTC. Faculty will demonstrate TSTC Core values of Excellence, Accountability, Service and Integrity with internal and external stakeholders, customers, students and members of the community. INSTRUCTIONAL DELIVERY: Prepare and deliver high quality instruction and facilitate the learning of students. Develop appropriate course syllabi and instructional plans, and organize daily classes utilizing a variety of creative/innovative techniques. INSTRUCTIONAL MANAGEMENT: Fulfill assigned schedule, maintain accurate student records, maintain instructional environment with emphasis on safety, equipment security where applicable, and ensure opportunities for student/participant evaluation. STUDENT RETENTION AND PLACEMENT: Performs student advisement such that students are provided with timely, accurate, and comprehensive information. Collaborate with the Office of Student Success to ensure students receive current information on tutoring and other programs designed to increase retention. PROGRAM RECRUITMENT & PROMOTION: Participate in related tours and recruitment events. Assist in department/program planning for recruitment. TEAMWORK & SERVICE: Demonstrates a willingness to be of service and exhibits pleasant and courteous behavior toward customers (students, parents, employers, and media), organizational coworkers, and other general public contacts. Maintains flexibility, including availability for evening, weekend, or summer assignment, as appropriate; able to work effectively in a team environment; commitment to the mission, vision and values of the college. OTHER DUTIES AS ASSIGNED The core competencies for direct instructional delivery in an applied learning environment can be condensed into a few overarching categories: TEACHING & LEARNING: Deliver high quality instruction and facilitate the learning of students. Organize daily classes utilizing a variety of creative/innovative techniques. Tailor teaching methods to diverse learning styles and needs. MENTORSHIP & COACHING: Understanding and empathizing with student experiences. Providing personalized guidance and support. Articulating ideas clearly and fostering open communication. ASSESSMENT & FEEDBACK: Creating and utilizing assessments to provide constructive feedback and guide learning.Continually evaluating and improving teaching strategies. TECHNOLOGY INTEGRATION: Effectively using technology to enhance learning experiences. Required Skills, knowledge, and certifications or licenses * Verifiable industrial work experience in the welding and fabrication Industry. * Must be knowledgeable and proficient in all welding disciplines (GTAW, GMAW, FCAW, SMAW, and SAW on plate and pipe as well as knowledge in Plasma and Oxy-Acetylene cutting procedures). * Successful completion of supervised Weld Test on site. * Must be proficient at blueprint reading and pipefitting theory and its application. Preferred Skills, knowledge, and certifications or licenses Preferred candidate would also have: * 2 Years or more teaching experience a plus * NDTE experience and strong metallurgical background preferred. * 3+ years industrial experience in the Welding and Fabrication Industry * AWS D1.1 or D9.1 Certifications * NCCER Certification * OSHA 30 Education and Experience Required * Associate degree in a closely related field and demonstrated qualifications in the technology's teaching discipline. * Verifiable professional experience may be accepted in lieu of other requirements as approved by the Vice Chancellor who oversees academic programs, or his/her designee.* Preferred * Bachelor's degree in a closely related teaching discipline Equal Opportunity Employer Texas State Technical College (TSTC), as an equal opportunity employer, complies with all applicable federal and state laws regarding nondiscrimination. TSTC is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Employment Eligibility Verification If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original documents to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at TSTC. Background Checks A criminal history background check will be required for the finalist(s) under consideration for this position. After you complete your application, please send your transcripts to ******************************.

HUTCO, INC. Pipe Welder Hutco Branch: Moss Point, MS Rate of Pay: $42.00 per hour and $180 per diem for those who qualify Description: Pipe Welders are responsible for preforming pipe welding procedures on Stainless Steel and Copper-Nickel pipe using the TIG welding process. Requirements: Minimum 4 years of experience as Pipe Welder Must have GTAW (TIG) and SMAW (STICK) experience Must be able to pass X-Ray welding test on stainless steel and copper nickel in the 6G position (restricted) Pipe Welding test is given in a restricted position (6G) on a 5” schedule 80 carbon steel pipe. GTAW (TIG) process is used to weld the root pass and an 11018 electrode is used to weld the fill portion and cap. This is for X-ray quality. Must pass drug test (HFT) and E-Verify Must be able to work all shifts Must be able to work in confined spaces, ascend and work at heights, under all weather conditions. Benefits: A limited benefit plan is available to Hutco, Inc. employees through Essential Staff Care. Available plans include: Medical/Prescription Dental Coverage Vision Coverage Short Term Disability Benefits Term Life Benefits Accidental Death & Dismemberment Benefit CONTACT HUTCO TODAY! Apply ONLINE or at the MOSS POINT branch: 6043 Hwy 63, Suite 2 Moss Point, MS 39563 Contact: Brandi Choate Phone: ************ E-mail: ******************** #HUTCOSP Hutco is an Equal Opportunity Employer (EOE).

Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a Shipyard. Pay rate is up to $25 + $160 perdiem, if eligible. Job Requirements: Three years of experience in Aluminum welding and flux core arc welding processes. Proficient in flat, vertical, overhead, and horizontal. Ceramic Tape experience is required. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

Pipe Fitter/Welder About PROENERGY PROENERGY is a global and vertically integrated energy transition platform. Focused exclusively on fast-start, dispatchable power, our company supports both energy security and renewable growth with complete turbine services, project development, equipment manufacturing, turnkey generation facilities, operations, and maintenance. Our Footprint We are primed for the energy transition with permanent service locations in Missouri, Texas, and Argentina. Our world-class Missouri headquarters is purpose-built to meet dispatchable power needs. It sits on 90 acres in Sedalia and features more than 600,000 sq. ft of service capacity under roof, which includes the only independent Level-IV aeroderivative depot and string-test facility in the world. Our Houston, Texas, office is a strategic satellite positioned near our own dispatchable power installations. Our Philosophy We take care of our people and strive to make a positive difference for the world. We offer competitive pay, excellent benefits that include Medical, Dental, Vision, and Life/Disability Insurance at minimal cost to the employee, 10 paid holidays, paid time off, and a 401K plan. If you are looking for a rewarding career and possess specialized knowledge and quality-oriented problem-solving skills, we encourage you to apply today. Assemble, weld, install, and maintain piping systems and related equipment for manufacturing and industrial production systems. This role involves interpreting complex drawings, performing precision pipe fitting and welding primarily on Small-Bore Stainless-Steel Piping, and ensuring that all work meets stringent ASME codes, safety requirements, and quality standards.Assemble, weld, install, and maintain piping systems and related equipment for manufacturing and industrial production systems. This role involves interpreting complex drawings, performing precision pipe fitting and welding primarily on Small-Bore Stainless-Steel Piping, and ensuring that all work meets stringent ASME codes, safety requirements, and quality standards. Reports To: Fabrication Manager Work Location: 6246 McHard Road, Houston, TX 77053 Please note this is full-time day shift position 100% based at our facility in Sedalia, MO. As such, there are no travel requirements or per diems. Position Responsibilities Read and interpret 2D and 3D piping drawings, isometrics, P&IDs, and ASME code specifications to plan fabrication and installation of piping systems. Cut, fit, weld, and assemble pipe spools and components to specified dimensions and tolerances using appropriate tools and welding processes in compliance with ASME requirements. Maintain accurate weld maps and documentation for all fabricated pipe spools and assemblies, ensuring traceability for ASME code compliance. Requisition and manage tools, equipment, and materials necessary for each project phase, coordinating with supervisors and procurement as needed. Install pipe supports, valves, flanges, couplings, and fittings to connect piping systems to machinery, tanks, pumps, and process equipment per ASME B31.1/B31.3 standards. Conduct inspections, hydrostatic testing, and other quality verification procedures to ensure systems meet ASME and customer specifications. Ensure adherence to all safety, environmental, and quality control policies and procedures. Precision pipe fitting and welding primarily on Small-Bore Stainless-Steel Piping Read and interpret 2D and 3D piping drawings, isometrics, P&IDs, and ASME code specifications to plan fabrication and installation of piping systems. Cut, fit, weld, and assemble pipe spools and components to specified dimensions and tolerances using appropriate tools and welding processes in compliance with ASME requirements. Maintain accurate weld maps and documentation for all fabricated pipe spools and assemblies, ensuring traceability for ASME code compliance. Requisition and manage tools, equipment, and materials necessary for each project phase, coordinating with supervisors and procurement as needed. Install pipe supports, valves, flanges, couplings, and fittings to connect piping systems to machinery, tanks, pumps, and process equipment per ASME B31.1/B31.3 standards. Conduct inspections, hydrostatic testing, and other quality verification procedures to ensure systems meet ASME and customer specifications. Ensure adherence to all safety, environmental, and quality control policies and procedures. Precision pipe fitting and welding primarily on Small-Bore Stainless-Steel Piping Required Qualifications High school diploma or GED, or equivalent relevant experience. Minimum of 3-5 years of pipe welding and fitting experience in an industrial or manufacturing environment. Journeyman-level pipefitting or welding certification (or equivalent training and experience). Familiarity with ASME welding procedures and B31 piping codes. US work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa. Candidate must also pass a State and Federal criminal history/security background check and pre-employment drug screen. Desired Qualifications Proven ability to troubleshoot piping system and equipment issues. Experience reading and interpreting P&IDs, process flow diagrams, and isometric piping drawings. Working knowledge of ASME, AWS, and other relevant welding and piping codes. Familiarity with manufacturing processes, process controls, and plant utilities. Proficiency in using welding and pipefitting tools, measuring instruments, and related equipment. Ability to work at heights, in confined spaces, and in various environmental conditions. Strong commitment to safety practices and use of PPE (hard hat, steel-toe boots, safety glasses, respirators, hearing protection). Essential Job Functions Ability to walk manufacturing and construction sites, climb ladders and stairs, and work on uneven surfaces. Ability to lift at least 50 lbs. and work in a variety of positions (standing, kneeling, overhead). Daily use of welding equipment, forklifts, hand tools, and computers for job documentation and communication. It is PROENERGY's policy to provide equal opportunity in employment to all its employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, national origin, marital status, ancestry, medical condition, military status, or any other characteristic protected by State or Federal law.

We're looking for Welders with aluminum welding experience who are excited to grow their careers while supporting critical energy infrastructure projects across the U.S. This hands-on field role offers the opportunity to work on a wide variety of job sites, including power plants, hydroelectric dams, and large-scale industrial facilities. You'll focus on systems such as Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers. You will be part of a fast-growing team that takes pride in safety, quality, and craftsmanship. What You'll Do: Weld aluminum components in multiple positions (vertical, horizontal, overhead - 6G test required) Read and interpret construction, welding, and electrical drawings Rig, lift, align, and set electrical bus duct equipment based on plans and specifications Demo, fit, and install new mechanical components as part of system upgrades Maintain tools and welding equipment in a safe, working condition Conduct safety checks and inspections; identify and address wear, defects, and deterioration Operate electrical testing equipment, including Hi-Pot, Ductor, and Megger Work effectively alongside field technicians, project teams, and other trades Complete daily job reports and timesheets Operate company vehicles and follow RMS Energy's safety and driving policies Follow strict safety and PPE usage protocols due to noise, electrical hazards, and elevated work areas Take initiative and work independently with minimal supervision The Experience We're Looking For: 3+ years of aluminum welding experience (MIG required, TIG preferred) Familiarity with medium and high voltage electrical equipment Ability to read and interpret technical drawings and field documentation Knowledge of OSHA safety standards, including PPE use and working at heights Experience with substation construction or electrical bus installation is preferred Proficient in operating forklifts, manlifts, and other field equipment Additional Requirements: Willingness to travel up to 75% across the continental U.S. High school diploma or GED required Valid driver's license with a history of safe and responsible driving Must pass a background check and drug/alcohol screening Legally authorized to work in the United States Available for extended and irregular hours as needed Able to work outdoors in all weather, at heights (100+ ft), in confined spaces, and around high-voltage equipment and heavy machinery Physically capable of lifting 50+ lbs and enduring extended physical activity Requires good vision, hearing, and English proficiency for safe, effective communication in noisy environments Bonus Points for: Completion of a trade school program, technical college, associate degree, or skilled trade certification in welding or a related field is strongly preferred TWIC Card CDL License Prior experience working with Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers Why Join RMS Energy: We're not just another power services company. We're a tight-knit, mission-driven team that values safety, teamwork, innovation, and continuous growth. Competitive Compensation - Overtime potential and merit-based raises Full Benefits - Medical, dental, and vision coverage fully paid for employees, starting the month after hire Steady Employment & Career Growth - Be part of a fast-growing company with promotion potential 401(k) with Company Match - Traditional & Roth options + free investment guidance Top-Tier Equipment - Provided to support you in the field Compensated Travel Time plus Per Diem - Earn while seeing new places Education Support - Paid training, certifications, and industry memberships Generous PTO - Paid vacation, holidays, and sick leave Employee Assistance Program - Legal, financial, and mental wellness support Want to be part of something meaningful? Apply today and join a team where People, Purpose, and Power come together - your future starts here. RMS Energy is an Equal Opportunity Employer. We believe diverse teams drive better outcomes, and we're committed to creating an inclusive environment where all employees feel valued and empowered. For more information about RMS Energy, please visit ******************

SUMMARY OF COMPANY Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and Boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is “Faster, Safer, Better”. JOB SUMMARY As a Pipe Welder you are responsible for fabricating, installing, and repairing piping systems that transport fluids and gases throughout marine vessels. This role involves reading and interpreting blueprints, schematics, and work orders to accurately weld various pipe types, including carbon steel, stainless steel, and copper-nickel, in challenging conditions such as confined spaces and at heights. The welder must use methods like TIG, MIG, and stick welding to achieve high-quality welds that meet industry standards, ensuring structural integrity and adherence to safety codes. WORK SCHEDULE Regular attendance and punctuality are required of all employees. Day Shift: 6:00am - 3:30pm Overtime and/or Weekend Availability required. Houston. (8502 Cypress St, Houston Tx 77012) BENEFITS Comprehensive Benefits (medical, dental, vision, life). 401(k)/Retirement Savings with a match. Friendly Work Environment. Paid-Time off/Holidays. Career Path Opportunities RESPONSIBILITIES Prepare, assemble, and install piping systems on ships according to detailed specifications. Perform various welding techniques (e.g., SMAW, FCAW) to join and repair pipes with precision, accounting for different metals and wall thicknesses. Inspect welds to identify and correct defects, ensuring compliance with industry standards and codes. Adhere to all safety protocols, including the use of PPE, and participate in regular safety briefings. Interpret blueprints and technical documents to plan and execute welding and assembly tasks accurately. EXPERIENCE & QUALIFICATIONS Proficiency in English required; bilingual English/Spanish preferred. Proficiency in multiple welding techniques (SMAW, FCAW) Ability to work in challenging conditions, such as confined spaces and elevated platforms Strong knowledge of pipefitting and layout skills Familiarity with industry safety standards (OSHA, ASME, etc.) Ability to read and interpret blueprints, schematics, and work orders Must have or be able to obtain a TWIC card PHYSICAL / MENTAL REQUIREMENTS The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, life vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD's), or other protective equipment as required by the work performed and location the work is being done. In addition, Employees in this position must also be capable of: Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters. Standing, stooping, bending, crouching, kneeling, squatting, climbing, crawling, or sitting for long periods of time. Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Climbing stairs, and/or vertical ladders of varying heights. Working in confined work areas and/or elevated heights. Lifting objects of minimum of 10lbs, with maximum single-person lift limit of 50lbs, with frequent lifting and carrying. Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. Visually inspecting equipment and verifying information, often in small print. Applying sideways/upward/downward pressure to tighten and loosen hardware. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Southwest Shipyard, LP is on an “at-will” basis. There is no contract of employment between Southwest Shipyard, L.P., and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by Southwest Shipyard, L.P. Executive. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement Southwest Shipyard, LP is an equal opportunity employer, and all qualified candidates will receive consideration without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or any other characteristic protected by law. Southwest Shipyard, LP participates in the E-Verify Employment Verification Program. Southwest Shipyard, LP is not currently accepting unsolicited resumes from search firms. Regardless of past practice, all resumes submitted by search firms to any employee at Southwest Shipyard, LP, via-email, the Internet or directly to hiring managers at Southwest Shipyard, LP in any form without a valid written agreement in place for that specific position will be deemed the sole property of Southwest Shipyard, LP. As a result, no fee will be paid in the event the candidate is hired by Southwest Shipyard, LP

YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: * Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment * Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys * Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys * Must be able to pass aluminum welding certification tests * Performs related tasks such as thermal cutting and grinding * Repairs broken or cracked parts, fills holes, and increases size of metal parts * Locates and repairs cracks in products and equipment * Maintains clean work area * Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears * Determines layouts and welds parts and assemblies according to engineering drawings and specifications * May monitor and verify quality in accordance with statistical process or other control procedures * Trains less experienced employees to build quality products within the time standard * Participates in continuous improvement meetings, and shares knowledge for improvement actions * Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation * Interacts with employees and managers across the company * May need to operate a vehicle or forklift * Work done with minimal supervision * Work may be done without established procedures * Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: * Must know shop mathematics through geometry * Ability to read and interpret complex prints * Good eye/hand coordination * Basic computer skills * Must have the ability to follow written and verbal instructions * Must have the ability to follow safety practices * Basic problem-solving skills * Ability to learn how to use necessary computer tools * Visual attention to detail * Reliable hand strength and manual dexterity * Three (3) years directly related work experience or two (2) years of concentrated welding training. * High school Diploma or GED required, AA in welding. * Able to lift to a maximum of 25-40 lbs. * Able to sit/stand for long periods of time. * Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

The Welder position is responsible for accurately reading and interpreting blueprints, drawings, and specifications to meet project requirements. This role involves fabricating large fuel tanks-up to 60 feet long and 13 feet wide-designed to hold 3,000 to 10,000 gallons of diesel fuel. The welder must ensure strict adherence to safety standards by wearing required PPE and following all safety guidelines throughout the process. Training & Trial Period Work Schedule (Monday-Friday) Weeks 1-3: 6:00 AM - 4:30 PM Weeks 4-8 (Split Shift): 10:00 AM - 6:30 PM Final 90-Day Trial Period (Full-Time Shift): 3:30 PM - 12:30 AM This position is eligible for 10% differential pay. Accountabilities: Read and interpret blueprints, drawings, and specifications to determine welding requirements. Prepare materials by cleaning, cutting, and positioning components for welding. Set up, operate, and maintain welding equipment and tools. Weld components using manual or semi-automatic equipment in multiple positions. Inspect welds to ensure compliance with specifications and quality standards. Complete quality checklists at each stage of the process. Work with various metals, including steel, aluminum, and stainless steel. Prepare surfaces by removing slag, rust, grease, and scale prior to welding. Maintain a safe and clean work environment by following all safety protocols and wearing required PPE. Report hazards, near misses, and unsafe conditions promptly. Collaborate with team members and supervisors to meet production goals. Perform other duties as assigned to support welding and fabrication operations. Attributes Safety First: Adheres to all safety protocols and promotes a hazard-free workplace. Have Humanity: Works respectfully and collaboratively with team members. Be Transparent: Communicates clearly about progress, challenges, and safety concerns. Drive Innovation: Suggests improvements to welding processes and tools for efficiency. Be Resilient: Adapts to changing priorities and production demands with a positive attitude. Always Reliable: Consistently delivers accurate, high-quality work. Grit: Handles physically demanding tasks with persistence and pride in craftsmanship Required Knowledge/Experience: High school diploma or equivalent required; welding certification preferred. 2+ years of welding experience, preferably in manufacturing or heavy equipment. Experience with 7024 welding rods and .045 wire MIG preferred. Ability to read and interpret blueprints and engineering drawings. Familiarity with welding machinery, electrical equipment, and manual tools. Strong mechanical aptitude and attention to detail. Knowledge of jobsite safety regulations and PPE requirements. Reliable, responsible, and respectful team player. Must pass a background check and drug screening. Work Environment and Physical Demands Manufacturing environment with exposure to indoor and outdoor conditions. Ability to stand, kneel, stoop, or crouch for 8-10 hours per day. Frequent use of hands for handling tools and components. Must be able to lift up to 50 lbs and push/pull up to 100 lbs (following OSHA standards). Visual and auditory ability to navigate safely and communicate effectively.

A Welder 2nd Class will operate appropriate equipment to assemble parts with a great deal of precision. A Welder 2nd Class must be competent in using various types of equipment following all safety precautions. The ideal candidate will also have a steady hand, great attention to detail and working knowledge of the different welding processes. Responsibilities and Duties: Promote and adhere to the Core Values and Behavior Code. Capable of setting up and operating semi-automatic and fully automatic welding equipment. Ability to weld in various positions - flat, vertical and horizontal. Proficient in operating welding related equipment such as positioners, jig fixtures, and cutting equipment. Proven ability to read blueprints, drawings and specifications. Experience reading, understanding and adhering to established weld procedures. Determine the appropriate welding equipment and processes based on drawing requirements; plan welding sequence to maximize efficiency and control distortion. Demonstrate proficiency and attain qualifications in four welding processes; SMAW, GMAW, SAW and FCAW. Must be able to pass a restricted accessibility test in the GTAW process. Skilled in carbon arc cutting. Ability to operate material handling equipment especially a jib hoist, a manlift and an overhead crane with supervision. Ability to inspect welded surfaces to ensure welds meet the minimum size and visual acceptance criteria. Follow proper material control procedures and record keeping. Must be able to pass the BW Weld Symbol test with a score of 75% or above. Responsible for achieving good speed of execution while maintaining quality workmanship. Maintain work area, equipment and supplies in a neat and orderly condition. Demonstrate and promote teamwork with team members at all levels in the organization to solve problems and improve processes. Continually learn from team members and strive to develop personal and professional skills. Required to wear appropriate PPE as required by job duties. Promote company goals with a focus on Safety, Quality, and Production. Perform other duties as assigned.

Job Description YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Must be able to pass aluminum welding certification tests Performs related tasks such as thermal cutting and grinding Repairs broken or cracked parts, fills holes, and increases size of metal parts Locates and repairs cracks in products and equipment Maintains clean work area Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears Determines layouts and welds parts and assemblies according to engineering drawings and specifications May monitor and verify quality in accordance with statistical process or other control procedures Trains less experienced employees to build quality products within the time standard Participates in continuous improvement meetings, and shares knowledge for improvement actions Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation Interacts with employees and managers across the company May need to operate a vehicle or forklift Work done with minimal supervision Work may be done without established procedures Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Must know shop mathematics through geometry Ability to read and interpret complex prints Good eye/hand coordination Basic computer skills Must have the ability to follow written and verbal instructions Must have the ability to follow safety practices Basic problem-solving skills Ability to learn how to use necessary computer tools Visual attention to detail Reliable hand strength and manual dexterity Three (3) years directly related work experience or two (2) years of concentrated welding training. High school Diploma or GED required, AA in welding. Able to lift to a maximum of 25-40 lbs. Able to sit/stand for long periods of time. Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.