Welder jobs in Levelland, TX - 1,017 jobs

KEY JOB RESPONSIBILITIES: Proficient in assigned welding techniques Interpretation of mechanical drawings, including the ability to read weld symbols Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials Working knowledge of fixturing and weld set up parameters (amps, volts, etc.) Conventional and precision measuring instruments Process inspection, certification, and documentation Welding equipment maintenance and inspection Finish grinding applications using manual and power tools Safety and Housekeeping Other duties as assigned by the area supervisor JOB SKILLS: Ability to read blueprints and pipe and instrumentation drawings Ability to read measuring devices Knowledge of pipe schedules and base material Ability to set up and use a mig welding machine Successful completion of internal welding test Relevant work experience Five years of experience with various forms of welding EDUCATION & TRAINING: High school diploma MINIMUM REQUIREMENTS: Five years of related experience in a manufacturing environment Must have a good command of the English language, both written and verbal PREFERRED REQUIREMENTS: Work performed in a shop environment Exposed to any number of elements but with none present to the extent of being disagreeable Requires normal vision and absence of color blindness Physical effort equal to frequent moving of up to 50lbs materials Regularly required to sit or stand, bend and reach The use of Safety Glasses is required The use of earplugs is recommended Ability to stand up to 10 hours a day (with a lunch in between) and up to 6 days a week Ability to work in a non-air-conditioned environment. Steel-toe boots required in Manufacturing Facility PHYSICAL REQUIREMENTS/WORK ENVIRONMENT: Work performed in a shop environment Exposed to any number of elements but with none present to the extent of being disagreeable Requires normal vision and absence of color blindness Physical effort equal to frequent moving of up to 50lbs materials Regularly required to sit or stand, bend and reach The use of Safety Glasses is required The use of earplugs is recommended Ability to stand up to 10 hours a day (with a lunch in between) and up to 6 days a week Ability to work in a non-air-conditioned environment. Steel-toe boots required in Manufacturing Facility

Full-time Description Main Purpose: To perform job functions required and assigned in the fabrication of structural/piping materials per the contract/job specifications and quality assurance requirements/fitting procedures and established ISO/QC program standards. The Welder's job duties are to properly weld structure or pipe to construct a drilling deck. This position is located Offshore in the Gulf of America, formerly known as the Gulf of Mexico. Essential Functions: Set and operate welding machine for applicable welding processes Perform welding processes assigned for structural, pipe, and welding projects Pass required welding test per AWS D1.1 latest edition, ASME section IX, and API 1104 Maintain quality of welding that can pass NDT testing procedures Perform welding assignments safely and efficiently, always practicing safety Operate appropriate hand tools (chipping hammers, grinders, etc.) Weld separately or in combination, using aluminum, stainless steel, cast iron, carbon steel, and other alloys Select and install torches, torch tips, filler rods, and flux according to welding chart specifications or any thickness of metals Determine required equipment and welding methods, applying knowledge of welding techniques Connect and turn regulator valves to activate and adjust gas flow and pressure to obtain desired flames Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking distortion, or expansion of the material Expertly weld small, medium, and large structural and pipes of various metals and alloys Expertly weld small, medium, and large structural items Weld structure (beams, grating, stairways) and pipe Assist with building a scaffold to access all areas on structure, pipe, or deck Pull up leads to weld on deck Transport welding equipment in the yard to the work area Perform other duties assigned by supervisor Benefits Offered: Earned Wage Access Health, Dental, and Vision Insurance 401(k) with Company Match Paid Holidays Paid Vacation Life Insurance Disability Insurance Safety Awards Company Store Employee Assistance Program (EAP) Requirements Physical Requirements: Standing, sitting, walking, stooping, kneeling, climbing, feeling, talking, hearing and seeing Turning, twisting, bending, and balancing Pushing, pulling and reaching Must be able to lift and/or move up to 25 pounds and occasionally 50-75 pounds Job Requirements: Must successfully demonstrate the ability to pass a practical welding test: 6G SMAW and 6GR SMAW and 6GR FCAW 2+ years of Offshore experience Must be able to pass pre-employment physical and drug screen Must be able to pass a background check Ability to communicate effectively, both verbally and in writing Valid TWIC card Desirable Experience, Education, and Training: Highschool diploma or GED Experience with 6G and 6GR -SMAW and FCAW welding Tools, Equipment, and Technology: Welders must know and use: welding machines, man lifts, chipping & grinding equipment, cutting torches, welding leads, welding whips, and welding guns All appropriate safety equipment used to perform their everyday welding duties (welding shields, goggles, hard hats, etc.) Environmental Conditions: 80 to 90% of the work activities are performed outdoors. Individuals will be required to work in changes of temperature, hot, cold, humid, wet, and dry conditions, dust, mud, etc. Individuals may also be exposed to fumes (Paint, paint thinners, diesel, /or gas, etc.) Gulf Island will not sponsor applications for work visas. Additionally, applicants for employment with Gulf Island must be currently authorized to work in the United States on a full-time basis. Accordingly, Gulf Island will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Gulf island is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Gulf Island employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Gulf Island. No recruiting placement fee will be paid in the event Gulf Island hires the candidate due to the referral or through other means.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Project Pipe Welder B As a Pipe Welder, you will set up, operate and adjust manual and/or automatic machines to perform welding operations in all positions Additional Information: * Urgently hiring * Multiple openings * This is a supplemental position located at the Solar Turbines manufacturing facility located in Channelview, TX * No relocation package is available Job Duties/Responsibilities may include, but are not limited to: * Perform Manual finish welding operations on carbon and stainless steel in all positions * Follow documented procedures and standard work to perform safe and defect free operations * Perform carbon arc cutting and gouging * Sanding may be required to prepare and dress welds * Use of forklifts, pallet jacks, jib and overhead cranes to move and position work pieces Required Qualifications: * Must be able to pass multiple welder qualification tests * Minimum of 6 months of experience in a production environment * Ability to perform simple computer operations * Be available to work 1st or 2nd shift * Ability to work overtime to support production demands, including weekends Desired Qualifications: * One (1) to three (3) years of GTAW and FCAW welding experience Top Candidates: * Good Communication Skills and strong commitment to safety, quality, and teamwork * Combination Welder and Fitter * Leadership Experience * Ability to work well individually or in a team environment Candidates may be placed on any shift, dependent on business needs Summary Pay Range: $25.48 - $38.22 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. * Opportunity for various Retention bonuses totaling $2500. * Eligibility for all retention bonuses are contingent on good standing in terms of performance and attendance. Retention bonuses are paid out in the following manner - this is to be used in conversations with candidates, the below doesn't get posted. * 60 Days ($200) * 90 Days ($300) * 180 Days ($400) * 270 Days ($600) * 360 Days ($1000) Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Competitive salary and annual bonus program * Medical, dental, and vision coverage * Paid time off plan (Vacation, Holiday, Sick, Etc.) * Health savings account (HSA) * Flexible spending accounts (FSAs) * Life Insurance * Employee Assistance Programs * Voluntary Benefits (Ex. Accident, Identity Theft Protection) * There will be cross-training and qualifications-based opportunities to earn up to an additional $2 per hour, with any night shift activity qualifying for another $3 per hour. * Potential base salary increases from annual performance reviews All eligible candidates MUST pass the following pre-employment screenings before they can be hired to any position: * Background Screening * Physical and drug/alcohol screening Solar is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. As a global company, Solar offers many job opportunities outside of the U.S. which can be found through our employment website at ********************************************************* Please ensure you frequently check the email account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. EEO/AA Employer. All qualified individuals - Including minorities, females, veterans and individuals with disabilities - are encouraged to apply. Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Job Description Are you a talented welder looking to travel and work on exciting projects across the country? Tanco Engineering wants to hear from you! With over 40 years in the industry, we're proud of our reputation for safety, reliability, and excellence. As a Storage Tank Welder with us, you'll play a critical role in ensuring the quality and safety of storage tanks. You'll join a friendly team that values your skills and contributions while giving you the chance to work in varied locations, meeting new people, and tackling interesting challenges. At Tanco Engineering, we believe in teamwork and open communication. You won't just be a number; you'll be a valued part of our family. So, if you're ready for an opportunity to shine, let's make it happen! Position Duties: Utilize your welding skills to ensure the structural integrity of storage tanks through various techniques like stick and flux core welding. Read and interpret blueprints to ensure your welding tasks meet all specifications. Inspect your work for quality control, promptly addressing any issues you may uncover. Work alongside your team to ensure projects are completed efficiently and on time. Maintain a safe work environment by following all safety protocols. Keep your welding equipment in top shape with routine maintenance and troubleshooting as needed. Requirements At least a year of welding experience, ideally in the storage tank industry. Attention to detail with a skill for spotting potential defects. A willingness to lift heavy equipment and engage in physically demanding tasks. Strong communication abilities coupled with a collaborative spirit. A passion for travel and the flexibility to work in various locations. A TWIC card might be required Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Background checks will also be included in the hiring procedure. Must be over 18 and eligible to work in the United States. Benefits Medical, dental, & vision insurance Retirement plan & ESOP Competitive pay with annual reviews. Join our team and enjoy competitive starting pay of $30-$34 per hour, which may vary depending on your experience and the results of your welding test. In addition to the attractive pay range, we offer a subsistence allowance of $125 (exceptions may apply per location) and reimbursement of $0.725 per mile for travel (when applicable).

ABOUT THE TEPA COMPANIES Established in 2005 and owned by the Paskenta Band of Nomlaki Indians, The Tepa Companies deliver comprehensive and sustainable solutions to federal, state, local, and private-sector clients throughout the United States. The tribally owned companies work independently and collaboratively to provide wide-ranging construction, engineering, environmental, industrial, staffing, and technology services. When you join Tepa Companies, you have the opportunity to expand your entrepreneurial skill set while growing professionally alongside the best in the industry. You will have the opportunity to impact your team, the organization as a whole, and subsequently, our Tribe. We seek out top talent to provide the best services for our clients. We focus on being a responsible company for our employees and their families by creating a culture that reflects our core values and offering competitive pay and benefits package. Our benefits package includes comprehensive medical, dental, vision, generous paid time off and holidays, 401(k) plan with company match, life insurance, flexible spending and health savings account, mental health support and resources, short and long-term disability, and tuition reimbursement. LOCATION: This is a nationwide traveling position requiring frequent travel to project sites across the United States. Per diem will be provided. ABOUT THE JOB The Tepa Companies are seeking a Welding Apprentice who will Perform welding tasks under supervision on piping and plate within petroleum operations facilities. In addition to welding, the successful candidate must be able to assist in tasks related to welding such as fit‐up, preparation, repair, inspection, and post weld preparation. As required, the Apprentice Welder will also be tasked to assist with general site work such as loading and unloading equipment and materials, site clean‐up and preparation, mobilization, and demobilization to and from the jobsite, scaffolding erection, general tank construction tasks and other duties as assigned. This role is intended for May 2026 college graduates who majored in an applicable field. As Tepa continues to grow, we are focusing on hiring recent graduates to begin their careers at our organization with opportunities to receive hands-on learning, mentorship, and growth within the company. This is an entry-level position that does not require previous experience but does require completed education in the particular discipline. Job Functions: * Follow welding procedure specifications when welding * Train and assist with performing quality welds able to pass radiographic examination * Train and assist with performing quality welds using various welding process, such as TIG, GMAW, SMAW, FCAW, etc. * Train and assist with producing quality welds with efficiency * Train to perform or assist with fit‐up and preparation of welds * Perform or assist with post weld cleanup, inspection, and repair * Communicate regularly with the Field Foreman regarding issues and concerns on the job site * Train to determine the required tools, materials and welding methods based on the project specifications * Assist with the assembly, installation, and repair of pipe components and systems according to specifications * Inspect all materials, equipment, and tools required to perform the work * Maintain supplies, equipment, and tools * Properly prepare materials by clamping, cutting, or applying chemical solutions to piping * Observe all safety regulations WHAT WE'RE LOOKING FOR * High School diploma or GED * Formal vocational/technical training in GTAW- Gas tungsten arc welding and basic welding processes/procedures * Must be graduating in 2026 from vocational training (May/June graduates preferred) * Must be able to pass a multi-position weld test utilizing the SMAW process * Must be able to pass 2 and 3G plate welding tests * Must be able to perform stick welds on both carbon and stainless-steel plate and pipe * Must be able to utilize large weld rods (3/16" minimum) in multi-positions in an effective and efficient manner * Ability to learn to read and interpret blueprints, schematics, and written instructions * Must have a general knowledge of AWS, API, ANSI, and ASME codes and standards * Must be able to troubleshoot and have a strong attention to detail * Must have physical dexterity * Must be able to follow verbal directions * Must be able to read and write in English * Must be willing to travel for long durations * Must be able to pass a background check required to access US military installations * Must have a valid driver's license Equal Opportunity Employer Veterans

United Alloy is a preferred designer, manufacturer and powder coater of certified metal tanks, skids, frames, trailers, chassis, and related products crafted to world-class quality standards in strategic partnership with Fortune 500 OEM customers.UA products are proudly "Made in the USA". In addition to being made in the USA, UA is also 9001 certified, and has been recognized as a WBENC woman/minority owned business. CULTURE United Alloy empowers and entrusts our employees to manage the responsibilities of both their work and home lives. We are an agile team that produces extraordinary results, setting the standard in safety, quality, productivity, and profitability. Employees act with a sense of ownership, take initiative to problem solve and is committed to the company's mission, their team and themselves. United Alloy is supportive and encouraging of our employees, we are able to help make their dreams become a reality. At UA, every employee matters to us. We want everyone to have their own success story in their personal and professional lives. It's one way that makes us an actively engaged team, inspired to win together. SUMMARY The UA student learner program is designed to allow students to experience a "hands-on" approach to learning various facets of the organization. The student will have exposure to metal fabrication concepts and processes. This program is intended for students interested in pursuing a career in welding. PROGRAM START DATE: July 13th, 2026 WHAT YOU'LL DO Applicable to all areas of production shop * Can follow written and verbal directions to complete assignments or jobs * Can compute decimal equivalents and interchange fractions * Actively participate in efforts to establish and promote a safe and healthy work environment * Follow all UA policies and procedures * Act professionally and cooperate with other in a team setting * Other duties may be assigned Fabrication Areas * Must be able to set up and run in one of the fabrication work areas * Understands how to manage daily work expectations and goals * Understands, interprets, and follows foreman's report including priorities and start dates * Understands how to read material sheet tags and determines material types and gauges * Understands cross check concepts and inspects product according to Inspection Control Plan * Follows all safety policies and standards * Understands non-conforming process according to SOP-0003 * Maintains accurate and timely system transactions * Can inspect and clean equipment including all preventative maintenance Welding Areas * Welds product using fixturing (if applicable) with minimal supervision * Utilizes hand tools, fixtures, and clamps for small welding applications * Can interpret basic elements of a blueprint, including welding symbols * Can identify types of joints and welds * Can meet UA weld aesthetic standards per customer specifications * Can set up and maintain welding machines including changing wire and monitoring gases * Can monitor and maintain welding consumable and supply stock * Understands cross check concepts and inspects product according to Inspection Control Plan * Accurately tags material and product according to WI-0002 Product Identification * Understands non-conforming process according to SOP-003 * Can maintain a high degree of quality, must not have excessive scrap * Understands and can use basic math principles including addition, subtraction, multiplication and division * Accurately and efficiently perform all required PM on equipment * Able to successfully weld 1st articles and PPAPs * Can make minor repairs to equipment and support equipment * Inspects own work for quality standards Batch Paint/TTX Areas * Load, wash, mask, and unload product during daily operation of the paint line * Will assist the setup personnel as directed for overall set up and changeover of the paint line * Inspects products regularly during production runs and informs set up technician of quality problems * Ability to package finished parts and prep for shipment Assembly Area * Understands cross check concepts and inspects product according to Inspections Control Plan * Accurately tags material and product according to product specifications * Can identify hardware components used in assemblies * Can compute decimal equivalents and interchange fractions * Can accurately count and record production activity including picking, transfers, etc. * Can follow written and verbal directions to complete assignments or jobs Shipping Area * Ability to interpret and systematically prepare packing slips, bills of lading and other shipping related documentation prior to shipping any product * Follow proper packaging methods and reference United Alloy's Master Document system for formal instructions * Assists with raw material inventory control and accuracy: including sheet stock, hardware, and other components WHAT YOU'LL NEED * High School Junior or Senior in "good standing" that is 16-18 years of age; Must be willing to provide transcripts and faculty/personal recommendations upon request. * Submit an application that includes a well-written essay on why you want to be a United Alloy Youth Apprentice * Must have reliable transportation to work * Success completion of technical education courses and/or current enrollment in technical education courses * Ability to follow instructions both written and verbal * Basic computer skills * Must possess the ability to utilize tape measure, caliper, basic hand tools and air tools * 12 Expected Behaviors of Actively Engaged Person - 100% Responsible, Trustworthy, Team Player, Clear Communicator, Empathy, Humility, Emotional Self-Control, Resolves Conflict Directly, Positive Attitude, Respects Others, Problem Solver, and Agile. BENEFITS In addition to excellent starting wages, we offer a competitive compensation and benefits package as well as numerous perks. * Medical, dental and vision * Generous RTO and Vacation policy * 401(k) with company match * Bonus opportunities * Paid training * Company paid holidays * Earn a competitive salary and performance-based bonuses NOTE: Given the nature/size of our product and customer requirements, we require a stringent hiring process to ensure the highest quality product. Qualified candidates must successfully complete: Basic Skills/Measurement Test | Blueprint Reading Test | Pre-Employment Physical & Drug Screen Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand, sit, walk, bend, twist, stoop, pull, push, assemble, and carry for extended periods of time. Ability to lift and/or move up to 25 pounds regularly, frequently lift or move up to 50 pounds and occasionally lift and/or move up to 100 pounds with an assist. Work Environment: Ability to perform in a manufacturing environment that may have high noise levels, dust, chemicals, oil, and grease. Ability to work in an environment that may be either hot, cold or humid.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Project Pipe Welder B As a Pipe Welder, you will set up, operate and adjust manual and/or automatic machines to perform welding operations in all positions Additional Information: * Urgently hiring * Multiple openings * This is a supplemental position located at the Solar Turbines manufacturing facility located in Channelview, TX * No relocation package is available Job Duties/Responsibilities may include, but are not limited to: * Perform Manual finish welding operations on carbon and stainless steel in all positions * Follow documented procedures and standard work to perform safe and defect free operations * Perform carbon arc cutting and gouging * Sanding may be required to prepare and dress welds * Use of forklifts, pallet jacks, jib and overhead cranes to move and position work pieces Required Qualifications: * Must be able to pass multiple welder qualification tests * Minimum of 6 months of experience in a production environment * Ability to perform simple computer operations * Be available to work 1st or 2nd shift * Ability to work overtime to support production demands, including weekends Desired Qualifications: * One (1) to three (3) years of GTAW and FCAW welding experience Top Candidates: * Good Communication Skills and strong commitment to safety, quality, and teamwork * Combination Welder and Fitter * Leadership Experience * Ability to work well individually or in a team environment Candidates may be placed on any shift, dependent on business needs Summary Pay Range: $25.48 - $38.22 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. * Opportunity for various Retention bonuses totaling $2500. * Eligibility for all retention bonuses are contingent on good standing in terms of performance and attendance. Retention bonuses are paid out in the following manner - this is to be used in conversations with candidates, the below doesn't get posted. * 60 Days ($200) * 90 Days ($300) * 180 Days ($400) * 270 Days ($600) * 360 Days ($1000) Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Competitive salary and annual bonus program * Medical, dental, and vision coverage * Paid time off plan (Vacation, Holiday, Sick, Etc.) * Health savings account (HSA) * Flexible spending accounts (FSAs) * Life Insurance * Employee Assistance Programs * Voluntary Benefits (Ex. Accident, Identity Theft Protection) * There will be night shift premium qualifying for another $3 per hour for 2nd shift. * Potential base salary increases from annual performance reviews All eligible candidates MUST pass the following pre-employment screenings before they can be hired to any position: * Background Screening * Physical and drug/alcohol screening Solar is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. As a global company, Solar offers many job opportunities outside of the U.S. which can be found through our employment website at ********************************************************* Please ensure you frequently check the email account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. EEO/AA Employer. All qualified individuals - Including minorities, females, veterans and individuals with disabilities - are encouraged to apply. Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Job Description YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Must be able to pass aluminum welding certification tests Performs related tasks such as thermal cutting and grinding Repairs broken or cracked parts, fills holes, and increases size of metal parts Locates and repairs cracks in products and equipment Maintains clean work area Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears Determines layouts and welds parts and assemblies according to engineering drawings and specifications May monitor and verify quality in accordance with statistical process or other control procedures Trains less experienced employees to build quality products within the time standard Participates in continuous improvement meetings, and shares knowledge for improvement actions Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation Interacts with employees and managers across the company May need to operate a vehicle or forklift Work done with minimal supervision Work may be done without established procedures Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Must know shop mathematics through geometry Ability to read and interpret complex prints Good eye/hand coordination Basic computer skills Must have the ability to follow written and verbal instructions Must have the ability to follow safety practices Basic problem-solving skills Ability to learn how to use necessary computer tools Visual attention to detail Reliable hand strength and manual dexterity Three (3) years directly related work experience or two (2) years of concentrated welding training. High school Diploma or GED required, AA in welding. Able to lift to a maximum of 25-40 lbs. Able to sit/stand for long periods of time. Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Job Description Job Opportunity: Pipe Welder Join the skilled team at Evers & Sons Inc., a leader with over 40 years in the construction and energy sectors. We are seeking an experienced Pipe Welder to perform specialized welding in our fabrication shop. This role involves precision welding tasks, ensuring the integrity and safety of our projects. If you are committed to excellence and skilled in various welding techniques, we invite you to apply. Key Responsibilities: Perform pipe welding tasks using TIG, MIG, and Stick welding techniques on various metals, ensuring all work meets company standards and project specifications. Read, interpret, and execute complex mechanical drawings and specifications for pipe installations. Set up, operate, and maintain welding equipment, adjusting settings for different jobs and materials. Inspect and test welds and structures to ensure conformance with Evers & Sons' standards and regulatory requirements. Mentor and train junior welders, promoting best practices in welding and safety. Qualifications: High school diploma or GED required; technical training or certification in welding highly preferred. Minimum of 5 years of experience in pipe welding, particularly in a fabrication shop setting. Proficient in reading and interpreting mechanical drawings and welding symbols. Strong understanding of safety protocols and the ability to work in compliance with all health and safety regulations. Certifications in AWS, CWI, or similar relevant to pipe welding are advantageous. Additional Requirements: Must pass a pre-employment welding test, background check, and drug screening. Ability to follow complex instructions and work under minimal supervision. Willing to work overtime and weekends as required by project demands. Physically capable of handling heavy materials and standing for extended periods. What We Offer: Competitive salary and benefits package including health, dental, vision, and 401(k). Opportunities for professional growth and certification renewal support. A commitment to safety and quality in a dynamic work environment. Evers & Sons Inc. is an Equal Opportunity Employer. We value a diverse workforce and provide a discrimination-free workplace. We encourage all qualified individuals to apply, regardless of race, color, religion, sex, national origin, disability status, or any other protected characteristic.

As a family-owned and operated company, we feel a special obligation to the employees who comprise our Taco family. We are committed to offering employees access to the tools necessary to live long and productive lives. We strive to instill in all of our employees: A positive mental attitude that helps us to be a leader in the industry A commitment to building strong relationships, both inside and outside the organization A desire to learn, grow, and contribute to moving our strategy forward A need to create and to innovate Employment Type: Full Time Shift: 1st Shift Work Status: Onsite Position Summary: The Welder HF (Hydroflo) performs a variety of standardized as well as customized welding duties on standard and nonstandard parts. They perform custom weldment fit up using the gas metal arc welding/flux cored arc welding processes. Measures of Success Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within. Timely completion of all welding operations within the operational time limits and according to company quality protocols. Capability of welding fillet and groove welds without backing in both the horizontal and flat positions. Ability to resolve minor welding and fit-up issues with minimal guidance. Responsibilities Responsibilities include but are not limited to: Works mostly independently using drawings, specifications, WPS and verbal instructions. Uses various types of welding equipment and a variety of common hand and power tools. Performs fit up and fully welds a variety of standard and custom fabrications, with minimal guidance, by reading and interpreting standard and custom part drawings. Performs final welding operations on complex weldments. Uses gas metal arc welding/flux cored arc welding GMAW/FCAW welding process, with or without backing, in the flat, horizontal and vertical positions, on both steel and stainless-steel materials. Welds full penetration welds on small diameter pipe using the gas tungsten arc welding (GTAW) process. Uses a scissor lift when needed to access welding work at heights. With assistance and supervision, may perform more complicated welding and fit up, using various equipment. Assures that all parameters within the WPS are adhered to. Monitors quality of work, makes corrective adjustments and reports equipment malfunctions, defective materials or other unusual conditions to Supervisor. Maintains necessary records and completes transactions within the Enterprise Resource Planning (ERP) system. Maintains work area in neat, clean, and orderly condition and observes all safety regulations and practices. Performs other related duties as assigned or directed. Qualifications Required: High school diploma or equivalent Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding tests with the following variables: FCAW/GMAW and SAW processes Steel-steel, steel-stainless, stainless-stainless material Flat, horizontal and vertical positions With or without backing Small pipe diameter in rotated horizontal position 3+ years of welding experience using drawings, specifications, charts and welding equipment Proficiency in numerous Welding Procedure Specifications (WPS) including small pipe qualification and various welding positions. Ability to follow verbal and written instructions and effectively apply to assigned work Ability to perform repetitive work requiring constant alertness or activity and including standing and lifting for extended periods of time, sometimes at height of up to 10 feet Ability to manage time effectively to meet strict time deadlines and production volumes Good judgment to comply with instructions, solve problems, and the ability to solve minor technical issues without guidance Preferred Graduate of a welding and fabrication vocational or technical training program 12 months experience in a pipe, pressure vessel or structural welding shop Work Environment This position works primarily in a production floor environment where large equipment and noise are prevalent. Safety gear is required in these areas. This position reports into the site every day. This position has no direct reports. Benefits With nearly 1,000 people working at Taco worldwide, each with their own story, you will discover a sense of community and diverse, intelligent colleagues who help us innovate, create and explore. Taco employees benefit from a company that: Provides competitive salaries and benefits Offers tuition reimbursement, career development, and on-site training programs in our learning center Believes in sharing profits with its employees Is mindful about family, health and well-being Fosters conditions that allow people and communities to reach their full potential Embraces and celebrates diversity #TacoComfortSolutions

Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a Shipyard. Pay rate is up to $25 + $160 perdiem, if eligible. Job Requirements: Three years of experience in Aluminum welding and flux core arc welding processes. Proficient in flat, vertical, overhead, and horizontal. Ceramic Tape experience is required. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: * Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment * Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys * Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys * Must be able to pass aluminum welding certification tests * Performs related tasks such as thermal cutting and grinding * Repairs broken or cracked parts, fills holes, and increases size of metal parts * Locates and repairs cracks in products and equipment * Maintains clean work area * Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears * Determines layouts and welds parts and assemblies according to engineering drawings and specifications * May monitor and verify quality in accordance with statistical process or other control procedures * Trains less experienced employees to build quality products within the time standard * Participates in continuous improvement meetings, and shares knowledge for improvement actions * Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation * Interacts with employees and managers across the company * May need to operate a vehicle or forklift * Work done with minimal supervision * Work may be done without established procedures * Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: * Must know shop mathematics through geometry * Ability to read and interpret complex prints * Good eye/hand coordination * Basic computer skills * Must have the ability to follow written and verbal instructions * Must have the ability to follow safety practices * Basic problem-solving skills * Ability to learn how to use necessary computer tools * Visual attention to detail * Reliable hand strength and manual dexterity * Three (3) years directly related work experience or two (2) years of concentrated welding training. * High school Diploma or GED required, AA in welding. * Able to lift to a maximum of 25-40 lbs. * Able to sit/stand for long periods of time. * Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

We're looking for Welders with aluminum welding experience who are excited to grow their careers while supporting critical energy infrastructure projects across the U.S. This hands-on field role offers the opportunity to work on a wide variety of job sites, including power plants, hydroelectric dams, and large-scale industrial facilities. You'll focus on systems such as Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers. You will be part of a fast-growing team that takes pride in safety, quality, and craftsmanship. What You'll Do: Weld aluminum components in multiple positions (vertical, horizontal, overhead - 6G test required) Read and interpret construction, welding, and electrical drawings Rig, lift, align, and set electrical bus duct equipment based on plans and specifications Demo, fit, and install new mechanical components as part of system upgrades Maintain tools and welding equipment in a safe, working condition Conduct safety checks and inspections; identify and address wear, defects, and deterioration Operate electrical testing equipment, including Hi-Pot, Ductor, and Megger Work effectively alongside field technicians, project teams, and other trades Complete daily job reports and timesheets Operate company vehicles and follow RMS Energy's safety and driving policies Follow strict safety and PPE usage protocols due to noise, electrical hazards, and elevated work areas Take initiative and work independently with minimal supervision The Experience We're Looking For: 3+ years of aluminum welding experience (MIG required, TIG preferred) Familiarity with medium and high voltage electrical equipment Ability to read and interpret technical drawings and field documentation Knowledge of OSHA safety standards, including PPE use and working at heights Experience with substation construction or electrical bus installation is preferred Proficient in operating forklifts, manlifts, and other field equipment Additional Requirements: Willingness to travel up to 75% across the continental U.S. High school diploma or GED required Valid driver's license Must pass a background check and drug/alcohol screening Legally authorized to work in the United States Available for extended and irregular hours as needed Able to work outdoors in all weather, at heights (100+ ft), in confined spaces, and around high-voltage equipment and heavy machinery Physically capable of lifting 50+ lbs and enduring extended physical activity Requires good vision, hearing, and English proficiency for safe, effective communication in noisy environments Bonus Points for: Completion of a trade school program, technical college, associate degree, or skilled trade certification in welding or a related field is strongly preferred TWIC Card CDL License Prior experience working with Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers Why Join RMS Energy: We're not just another power services company. We're a tight-knit, mission-driven team that values safety, teamwork, innovation, and continuous growth. Competitive Compensation - Overtime potential and merit-based raises Full Benefits - Medical, dental, and vision coverage fully paid for employees, starting the month after hire Steady Employment & Career Growth - Be part of a fast-growing company with promotion potential 401(k) with Company Match - Traditional & Roth options + free investment guidance Top-Tier Equipment - Provided to support you in the field Compensated Travel Time plus Per Diem - Earn while seeing new places Education Support - Paid training, certifications, and industry memberships Generous PTO - Paid vacation, holidays, and sick leave Employee Assistance Program - Legal, financial, and mental wellness support Want to be part of something meaningful? Apply today and join a team where People, Purpose, and Power come together - your future starts here. RMS Energy is an Equal Opportunity Employer. We believe diverse teams drive better outcomes, and we're committed to creating an inclusive environment where all employees feel valued and empowered. For more information about RMS Energy, please visit ******************

Job DescriptionDescription: For more than 80 years, Winholt Equipment has been an industry leader in the design and manufacturing of custom food-handling and food-preparation equipment for the food service industry. We pride ourselves on meeting the ever-changing customer needs through creative engineering, product development, and distribution. Job Overview We are looking for dependable MIG Aluminum Welders to join our team. In this job, you will fit, weld, and assemble aluminum parts using MIG welding. You will read basic drawings, set up parts, and check your work to make sure it meets our quality standards. Main Responsibilities Weld and assemble aluminum parts using MIG welding. Clean and repair welds when needed. Follow all safety rules and company quality standards. Keep your work area clean and take care of tools and equipment. Work with other welders and production staff to meet daily goals. Pay close attention to detail while completing your tasks. Qualifications High school diploma or equivalent (preferred). 2-3 years of MIG aluminum welding experience, or formal welding training. Ability to read simple blueprints or drawings. Able to lift up to 50 lbs. Able to measure materials using a tape measure, square, etc. Must be reliable, safety-minded, and able to work well with a team. Job Requirements Pay is $18/hr Must be able to work either shift. Must have at least 1 year of thin-gauge aluminum MIG welding experience. Must be able to work on-site in Grand Prairie, TX. Winholt offers a full benefits package, including: Medical, dental, and vision insurance Holiday Pay is the time when calculating overtime Free Life insurance. Paid time off (PTO) 401(k) + company match Submit your resume here or apply in person at: Winholt Equipment 1169 N. Great Southwest Pkwy Grand Prairie, TX 75050 Requirements:

A Welder 2nd Class will operate appropriate equipment to assemble parts with a great deal of precision. A Welder 2nd Class must be competent in using various types of equipment following all safety precautions. The ideal candidate will also have a steady hand, great attention to detail and working knowledge of the different welding processes. Responsibilities and Duties: Promote and adhere to the Core Values and Behavior Code. Capable of setting up and operating semi-automatic and fully automatic welding equipment. Ability to weld in various positions - flat, vertical and horizontal. Proficient in operating welding related equipment such as positioners, jig fixtures, and cutting equipment. Proven ability to read blueprints, drawings and specifications. Experience reading, understanding and adhering to established weld procedures. Determine the appropriate welding equipment and processes based on drawing requirements; plan welding sequence to maximize efficiency and control distortion. Demonstrate proficiency and attain qualifications in four welding processes; SMAW, GMAW, SAW and FCAW. Must be able to pass a restricted accessibility test in the GTAW process. Skilled in carbon arc cutting. Ability to operate material handling equipment especially a jib hoist, a manlift and an overhead crane with supervision. Ability to inspect welded surfaces to ensure welds meet the minimum size and visual acceptance criteria. Follow proper material control procedures and record keeping. Must be able to pass the BW Weld Symbol test with a score of 75% or above. Responsible for achieving good speed of execution while maintaining quality workmanship. Maintain work area, equipment and supplies in a neat and orderly condition. Demonstrate and promote teamwork with team members at all levels in the organization to solve problems and improve processes. Continually learn from team members and strive to develop personal and professional skills. Required to wear appropriate PPE as required by job duties. Promote company goals with a focus on Safety, Quality, and Production. Perform other duties as assigned.

Full-time Description Main Purpose: To perform job functions required and assigned in the fabrication of structural/ piping materials per the contract/job specifications and quality assurance requirements/fitting procedures and established ISO/QC program standards. The Welder's job duties are to properly weld structure or pipe. Essential Functions: Set and operate welding machine for applicable welding processes. Perform welding processes assigned for structural, pipe, and welding projects. Pass required welding test per AWS D1.1 latest edition, ASME section IX, and API 1104. Maintain quality of welding that can pass NDT testing procedures. Perform welding assignments safely and efficiently, always practicing safety. Operate appropriate hand tools (chipping hammers, grinders, etc.) Weld separately or in combination, using aluminum, stainless steel, cast iron, carbon steel, and other alloys. Select and install torches, torch tips, filler rods, and flux according to welding chart specifications or any thickness of metals. Determine required equipment and welding methods, applying knowledge of welding techniques. Connect and turn regulator valves to activate and adjust gas flow and pressure to obtain desired flames. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking distortion, or expansion of the material. Expertly welds small, medium, and large structural and pipes of various metals and alloys. Expertly welds small, medium, and large structural items. Be able to weld structure (beams, grating, stairways) and pipe. Transport welding equipment in the yard to the work area. Benefits Offered: Earned Wage Access Health, Dental, and Vision Insurance 401(k) with Company Match Paid Holidays Paid Vacation Life Insurance Disability Insurance Safety Awards Company Store Employee Assistance Program (EAP) Requirements Physical Requirements: Standing: This is an essential job function/physical requirement. Walking: This is an essential job function/physical requirement. Turning, twisting, bending, and stooping- These physical requirements are essential job functions. Pushing and Pulling- These physical requirements are essential job functions. Reaching, forward, and overhead are essential job functions /physical requirements. Climbing: This is an essential job function /physical requirement. Balancing, fingering, feeling, talking, hearing, and seeing- These are all considered regular physical duties/requirements and would be needed/required to work in this industrial environment safely and efficiently. Lifting - employees must lift to 25 pounds and occasionally 50-75 pounds. Job Requirements: Must successfully demonstrate the ability to pass a practical welding test. Must have a minimum of 2 years of experience. Must be able to pass pre-employment physical and drug screen. Must be able to pass a background check. Ability to communicate effectively, both verbally and in writing. TWIC card Desirable Experience, Education, and Training: Highschool diploma or GED. Tools, Equipment, and Technology: Welders must have knowledge of and use: welding machines, man lifts, chipping & grinding equipment, cutting torches, welding leads, welding whips, and welding guns. All applicable safety equipment used to perform their everyday welding duties (welding shields, goggles, hard hats, etc.) Environmental Conditions: 80% to 90% of the work activities are performed outdoors. Individuals will be required to work in changes of temperature, hot, cold, humid, wet, and dry conditions, dust, mud, etc. They may also be exposed to fumes (Paint, paint thinners, diesel, /or gas, etc.) Gulf Island will not sponsor applications for work visas. Additionally, applicants for employment with Gulf Island must be currently authorized to work in the United States on a full-time basis. Accordingly, Gulf Island will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Gulf island is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Gulf Island employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Gulf Island. No recruiting placement fee will be paid in the event Gulf Island hires the candidate due to the referral or through other means.

United Alloy is a preferred designer, manufacturer and powder coater of certified metal tanks, skids, frames, trailers, chassis, and related products crafted to world-class quality standards in strategic partnership with Fortune 500 OEM customers.UA products are proudly “Made in the USA”. In addition to being made in the USA, UA is also 9001 certified, and has been recognized as a WBENC woman/minority owned business.   CULTURE United Alloy empowers and entrusts our employees to manage the responsibilities of both their work and home lives. We are an agile team that produces extraordinary results, setting the standard in safety, quality, productivity, and profitability. Employees act with a sense of ownership, take initiative to problem solve and is committed to the company's mission, their team and themselves.   United Alloy is supportive and encouraging of our employees, we are able to help make their dreams become a reality. At UA, every employee matters to us. We want everyone to have their own success story in their personal and professional lives. It's one way that makes us an actively engaged team, inspired to win together.   SUMMARY The UA student learner program is designed to allow students to experience a “hands-on” approach to learning various facets of the organization. The student will have exposure to metal fabrication concepts and processes. This program is intended for students interested in pursuing a career in welding. PROGRAM START DATE: July 13th, 2026 WHAT YOU'LL DO Applicable to all areas of production shop Can follow written and verbal directions to complete assignments or jobs Can compute decimal equivalents and interchange fractions Actively participate in efforts to establish and promote a safe and healthy work environment Follow all UA policies and procedures Act professionally and cooperate with other in a team setting Other duties may be assigned Fabrication Areas Must be able to set up and run in one of the fabrication work areas Understands how to manage daily work expectations and goals Understands, interprets, and follows foreman's report including priorities and start dates Understands how to read material sheet tags and determines material types and gauges Understands cross check concepts and inspects product according to Inspection Control Plan Follows all safety policies and standards Understands non-conforming process according to SOP-0003 Maintains accurate and timely system transactions Can inspect and clean equipment including all preventative maintenance Welding Areas Welds product using fixturing (if applicable) with minimal supervision Utilizes hand tools, fixtures, and clamps for small welding applications Can interpret basic elements of a blueprint, including welding symbols Can identify types of joints and welds Can meet UA weld aesthetic standards per customer specifications Can set up and maintain welding machines including changing wire and monitoring gases Can monitor and maintain welding consumable and supply stock Understands cross check concepts and inspects product according to Inspection Control Plan Accurately tags material and product according to WI-0002 Product Identification Understands non-conforming process according to SOP-003 Can maintain a high degree of quality, must not have excessive scrap Understands and can use basic math principles including addition, subtraction, multiplication and division Accurately and efficiently perform all required PM on equipment Able to successfully weld 1st articles and PPAPs Can make minor repairs to equipment and support equipment Inspects own work for quality standards Batch Paint/TTX Areas Load, wash, mask, and unload product during daily operation of the paint line Will assist the setup personnel as directed for overall set up and changeover of the paint line Inspects products regularly during production runs and informs set up technician of quality problems Ability to package finished parts and prep for shipment Assembly Area Understands cross check concepts and inspects product according to Inspections Control Plan Accurately tags material and product according to product specifications Can identify hardware components used in assemblies Can compute decimal equivalents and interchange fractions Can accurately count and record production activity including picking, transfers, etc. Can follow written and verbal directions to complete assignments or jobs Shipping Area Ability to interpret and systematically prepare packing slips, bills of lading and other shipping related documentation prior to shipping any product Follow proper packaging methods and reference United Alloy's Master Document system for formal instructions Assists with raw material inventory control and accuracy: including sheet stock, hardware, and other components WHAT YOU'LL NEED High School Junior or Senior in “good standing” that is 16-18 years of age; Must be willing to provide transcripts and faculty/personal recommendations upon request. Submit an application that includes a well-written essay on why you want to be a United Alloy Youth Apprentice Must have reliable transportation to work Success completion of technical education courses and/or current enrollment in technical education courses Ability to follow instructions both written and verbal Basic computer skills Must possess the ability to utilize tape measure, caliper, basic hand tools and air tools 12 Expected Behaviors of Actively Engaged Person - 100% Responsible, Trustworthy, Team Player, Clear Communicator, Empathy, Humility, Emotional Self-Control, Resolves Conflict Directly, Positive Attitude, Respects Others, Problem Solver, and Agile. BENEFITS In addition to excellent starting wages, we offer a competitive compensation and benefits package as well as numerous perks. Medical, dental and vision  Generous RTO and Vacation policy  401(k) with company match  Bonus opportunities  Paid training  Company paid holidays   Earn a competitive salary and performance-based bonuses  NOTE: Given the nature/size of our product and customer requirements, we require a stringent hiring process to ensure the highest quality product. Qualified candidates must successfully complete: Basic Skills/Measurement Test | Blueprint Reading Test | Pre-Employment Physical & Drug Screen Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand, sit, walk, bend, twist, stoop, pull, push, assemble, and carry for extended periods of time. Ability to lift and/or move up to 25 pounds regularly, frequently lift or move up to 50 pounds and occasionally lift and/or move up to 100 pounds with an assist. Work Environment: Ability to perform in a manufacturing environment that may have high noise levels, dust, chemicals, oil, and grease. Ability to work in an environment that may be either hot, cold or humid.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Project Pipe Welder B As a Pipe Welder, you will set up, operate and adjust manual and/or automatic machines to perform welding operations in all positions Additional Information: Urgently hiring Multiple openings This is a supplemental position located at the Solar Turbines manufacturing facility located in Channelview, TX No relocation package is available Job Duties/Responsibilities may include, but are not limited to: Perform Manual finish welding operations on carbon and stainless steel in all positions Follow documented procedures and standard work to perform safe and defect free operations Perform carbon arc cutting and gouging Sanding may be required to prepare and dress welds Use of forklifts, pallet jacks, jib and overhead cranes to move and position work pieces Required Qualifications: Must be able to pass multiple welder qualification tests Minimum of 6 months of experience in a production environment Ability to perform simple computer operations Be available to work 1st or 2nd shift Ability to work overtime to support production demands, including weekends Desired Qualifications: One (1) to three (3) years of GTAW and FCAW welding experience Top Candidates: Good Communication Skills and strong commitment to safety, quality, and teamwork Combination Welder and Fitter Leadership Experience Ability to work well individually or in a team environment **Candidates may be placed on any shift, dependent on business needs** Summary Pay Range: $25.48 - $38.22 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Opportunity for various Retention bonuses totaling $2500. Eligibility for all retention bonuses are contingent on good standing in terms of performance and attendance. Retention bonuses are paid out in the following manner - this is to be used in conversations with candidates, the below doesn't get posted. •60 Days ($200) •90 Days ($300) •180 Days ($400) •270 Days ($600) •360 Days ($1000) Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. Competitive salary and annual bonus program Medical, dental, and vision coverage Paid time off plan (Vacation, Holiday, Sick, Etc.) Health savings account (HSA) Flexible spending accounts (FSAs) Life Insurance Employee Assistance Programs Voluntary Benefits (Ex. Accident, Identity Theft Protection) There will be cross-training and qualifications-based opportunities to earn up to an additional $2 per hour, with any night shift activity qualifying for another $3 per hour. Potential base salary increases from annual performance reviews All eligible candidates MUST pass the following pre-employment screenings before they can be hired to any position: Background Screening Physical and drug/alcohol screening Solar is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. As a global company, Solar offers many job opportunities outside of the U.S. which can be found through our employment website at ********************************************************* Please ensure you frequently check the email account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. EEO/AA Employer. All qualified individuals - Including minorities, females, veterans and individuals with disabilities - are encouraged to apply. Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Must be able to pass aluminum welding certification tests Performs related tasks such as thermal cutting and grinding Repairs broken or cracked parts, fills holes, and increases size of metal parts Locates and repairs cracks in products and equipment Maintains clean work area Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears Determines layouts and welds parts and assemblies according to engineering drawings and specifications May monitor and verify quality in accordance with statistical process or other control procedures Trains less experienced employees to build quality products within the time standard Participates in continuous improvement meetings, and shares knowledge for improvement actions Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation Interacts with employees and managers across the company May need to operate a vehicle or forklift Work done with minimal supervision Work may be done without established procedures Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Must know shop mathematics through geometry Ability to read and interpret complex prints Good eye/hand coordination Basic computer skills Must have the ability to follow written and verbal instructions Must have the ability to follow safety practices Basic problem-solving skills Ability to learn how to use necessary computer tools Visual attention to detail Reliable hand strength and manual dexterity Three (3) years directly related work experience or two (2) years of concentrated welding training. High school Diploma or GED required, AA in welding. Able to lift to a maximum of 25-40 lbs. Able to sit/stand for long periods of time. Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.