Welder jobs in Logan, UT - 23 jobs

Wage : $60,000+ based on experience Schedule - Full Time, 8hr shifts, Monday - Friday 7:45am to 4:45pm Our staff also enjoy these benefits: * Health, dental, vision, prescription drug, and life insurance * Short & long-term disability * 401(k) retirement plan * Paid time off and paid holidays * Professional development assistance * Career advancement opportunities MTC is proud to operate the Clearfield Job Corps Center in Clearfield, UT where our staff provide quality services to our local youth. We value our professional and caring employees who are dedicated to improving people's lives and we want YOU to join our team! What you'll be doing: Teaching youth, 16-24 years of age in the welding processes of SMAW, GMAW, GMAW/SPRAY, FCAWG. FCAWS and GTAW in the D . 1 . 1 structural welding code. This is an opportunity to teach today's youth a career that has always been and remains in high demand in today's industry. Essential functions: * Provide students with direction, instruction, and assistance in designated areas of instruction. * Motivate and counsel students in areas of behavior, training, personal problems, or study habits. * Coordinate with counselors and staff as necessary to resolve issues affecting student training and/ or instruction. * Develop and prepare lessons in accordance with approved curriculum guidelines, recommend curricula changes, and supplemental materials. * Maintain an organized, clean, and safe training environment. Education and Experience Requirements: * HSD/ GED required * Utah state teaching certificate with an endorsement in Welding or Certified Welding Inspector (CWI), Certified Welding Educator (CWE) through American Welding Society (AWS), or National Center for Construction Education and Research (NCCER) Certified Craft Instructor. In addition, must have 6G Certification in SMAW and GMAW or FCAW-G, and be familiar with the American Petroleum Institute (API) code * Experience with youth, excellent written and verbal communications skills and computer proficiency required. * A valid driver license with an acceptable driving record. Why: Make a positive impact in your community by doing meaningful work that results in a rewarding career. Management & Training Corporation (MTC) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, disabled status, veteran status, genetic information, national origin, or any other category protected by federal law. MTC participates in E-Verify. We strive to provide reasonable accommodation for qualified individuals with disabilities, including disabled veterans, in our job application and hiring process. If you are interested in employment opportunities with Management & Training Corporation and need assistance, please contact our staffing department through ***************************** or ************.

AeroTech, an Oshkosh company Oshkosh AeroTech is a leading provider of aviation ground support products, gate equipment and airport services to commercial airlines, airports, air-freight carriers, ground handling and military customers. Oshkosh AeroTech offers products that make a difference in people's lives by supporting those in our communities who do some of the toughest work. They own many of the most trusted brands in the air transportation industry, including LEKTRO , JetAire , JetPower , AmpTekÔ, Jetway , and more. As a Certified Welder at Oshkosh AeroTech, you'll do more than join metal - you'll help build the systems that keep airports running safely around the world. This role is hands-on, technical, and detail-driven. You'll work with a variety of subassemblies and components, supporting both production and repair work across multiple product lines. From reading blueprints to closing out work orders, you'll be part of a team that values precision, safety, and pride in every weld. YOUR IMPACT Weld components and subassemblies using proper welding processes and specifications using GMAW-P processes. Interpret weld and assembly blueprints with accuracy. Prepare and complete all required documentation, including work order closures in MRP. Perform tack welding and full welding across a variety of assemblies. Conduct self-inspections to ensure quality and compliance with standards. Identify, track and help resolve issues during the assembly process. Support training efforts by assisting new team members as needed. MINIMUM QUALIFICATIONS Current weld certification and ability to pass a weld test to assess skills (Vertical-Up T-Joint welds, Flat V-Groove welds, various 14-gauge welds, etc.). Ability to read and comprehend work instructions and blueprints. Ability to add, subtract, multiply and divide using whole numbers, fractions and decimals. Ability to read a tape measure to 1/16”. Basic computer literacy. Ability to pass pre-employment background check, drug test, and hearing test. STANDOUT QUALIFICATIONS Prior welding experience or completion of a certified welding program. Familiarity with Styleine, TeamCenter or similar systems. Ability to obtain forklift or crane certifications. WHAT TO EXPECT Our welders work in a dynamic, hands-on environment that requires standing, lifting and regular movement throughout their shift. You'll work with a variety of parts, tools and machinery to assemble and finish high quality airport systems. This role required lifting up to 35lbs and involves physical activity such as standing, reaching and crouching throughout the day. Welding certifications and safety awareness are key components of this position. WHY OSHKOSH AEROTECH? At our Ogden facility, we're proud to support airport systems used around the world. Our people take pride in the work they do - and in the teams they do it with. From your first shift to your next opportunity, we focus on building a workplace rooted in respect, stability, and growth. We offer our full-time employees an outstanding range of benefits, including: Comprehensive Benefit Package - Available Day 1 401K plan with company match We put people first. We do the right thing. We persevere. We are better together. Oshkosh is committed to working with and offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability for any part of the recruitment process, please contact our talent acquisition team by email ******************************************. Oshkosh Corporation is a merit-based Equal Opportunity Employer. Job opportunities are open for application to all qualified individuals and selection decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected characteristic. To the extent that information is provided or collected regarding categories as provided by law it will in no way affect the decision regarding an employment application. Oshkosh Corporation will not discharge or in any manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Oshkosh Corporation's legal duty to furnish information. Certain positions with Oshkosh Corporation require access to controlled goods and technologies subject to the International Traffic in Arms Regulations or the Export Administration Regulations. Applicants for these positions may need to be "U.S. Persons," as defined in these regulations. Generally, a "U.S. Person" is a U.S. citizen, lawful permanent resident, or an individual who has been admitted as a refugee or granted asylum.

**Wage : $60,000+ based on experience** **Schedule -** Full Time, 8hr shifts, Monday - Friday 7:45am to 4:45pm **Our staff also enjoy these benefits:** + Health, dental, vision, prescription drug, and life insurance + Short & long-term disability + 401(k) retirement plan + Paid time off and paid holidays + Professional development assistance + Career advancement opportunities MTC is proud to operate the **Clearfield Job Corps Center in Clearfield, UT** where our staff provide quality services to our local youth. We value our professional and caring employees who are dedicated to improving people's lives and we want **YOU** to join our team! **What you'll be doing:** Teaching youth, 16-24 years of age in the welding processes of SMAW, GMAW, GMAW/SPRAY, FCAWG. FCAWS and GTAW in the D . 1 . 1 structural welding code. This is an opportunity to teach today's youth a career that has always been and remains in high demand in today's industry. **Essential functions:** 1. Provide students with direction, instruction, and assistance in designated areas of instruction. 2. Motivate and counsel students in areas of behavior, training, personal problems, or study habits. 3. Coordinate with counselors and staff as necessary to resolve issues affecting student training and/ or instruction. 4. Develop and prepare lessons in accordance with approved curriculum guidelines, recommend curricula changes, and supplemental materials. 5. Maintain an organized, clean, and safe training environment. **Education and Experience Requirements:** + HSD/ GED required + Utah state teaching certificate with an endorsement in Welding or Certified Welding Inspector (CWI), Certified Welding Educator (CWE) through American Welding Society (AWS), or National Center for Construction Education and Research (NCCER) Certified Craft Instructor. In addition, must have 6G Certification in SMAW and GMAW or FCAW-G, and be familiar with the American Petroleum Institute (API) code + Experience with youth, excellent written and verbal communications skills and computer proficiency required. + A valid driver license with an acceptable driving record. **Why:** Make a positive impact in your community by doing meaningful work that results in a rewarding career. Management & Training Corporation (MTC) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, disabled status, veteran status, genetic information, national origin, or any other category protected by federal law. MTC participates in E-Verify. We strive to provide reasonable accommodation for qualified individuals with disabilities, including disabled veterans, in our job application and hiring process. If you are interested in employment opportunities with Management & Training Corporation and need assistance, please contact our staffing department through ***************************** or ************. Learn more about Management & Training Corporation here (***************************

About the role As a Welder/Pipe Fitter at Quantum Industrial Services, you will be responsible for welding and fitting piping systems with precision and quality workmanship. This role requires at least four years of welding experience and certifications in ASME Section IX for stainless and carbon steel unless hired for a specific project. You'll work with construction documents, including plans and shop drawings, to complete installations on time and within budget. Additional responsibilities include ensuring fire safety, attending weekly safety meetings, maintaining tools and equipment, and keeping job sites organized. If you're a skilled welder/pipe fitter looking for a dynamic and safety-focused work environment, we want to hear from you! What you'll do 1. All projects must be constructed with VO quality workmanship. 2. All projects must be completed to the customer's approval and acceptance within budget and time allowed. 3. Arrive at the jobsite on time, ready to work with tools and safety equipment. Make arrangements for carpooling if possible. If necessary, crews will work beyond 3:30 if progress of project is behind or if situations arise that require additional attention. 4. Attend weekly safety meetings and work in a safe manner every day to prevent injuries or accidents. 5. Complete timecard on a daily basis with accurate job numbers, cost codes, and hours. Turn into jobsite superintendent or foreman every Monday for review. 6. Responsible for daily jobsite cleanup and keeping inventory in trailers organized. Secure tools and materials on site. Maintain and service tools and welders or report repair issues to shop. 7. Must be able to read construction documents it: plans, shop drawings, and specifications. 8. Provide adequate fire safety and wear PPE at all times. 9. Assist co-workers for on-the-job training and reach safety practices. Be a positive influence. 10. Keep welding certificate current. Qualifications 1. 4 years welding experience. 2. Certifications in ASME Section IX - stainless and carbon steel unless hired for specific project only. 3. Must be approved through workforce committee.

ABOUT US: Leading metals manufacturing company JENNMAR is seeking to fill Welder positions at its plant in Clearfield. Primary duties include performance of MIG, TIG, and stick-weld processes to operate welding equipment/machines. At JENNMAR fabrication takes place in our more than twenty strategically located manufacturing facilities associated with our affiliated brands. From bolts and beams to channels and trusses, to resin and rebar, and more, JENNMAR is uniquely positioned to accommodate our customers' industrial fabrication needs. EDUCATION/EXPERIENCE: HS/GED/Vo-Tech Welder Certification Required; AWS Certification A plus; One-to-Three (1-3) Years MIG, TIG, Stick-weld Experience Preferred or a combination of education and experience; ISO experience a plus. JOB REQUIREMENTS: Dependability to be consistently at work and on time with ability to work 40+ flexible schedule including weekends; Fundamental listening, verbal, and written communication skills; Functional math skills including knowledge of fractions and decimals; Ability to verify product dimensions using micrometers, calipers, and other precision measuring instruments; Special, form, and depth perception with finger and manual dexterity to perform welding processes; Repetitive standing, twisting, reaching, squatting capability during normal phase duties; Close visual acuity, near/far vision, and multiple limb coordination Moderate/heavy lifting capability (up to 65 lbs.) Team member mentality with ability to follow safety and standard operating procedures with a quality assurance mindset and adherence to proper PP requirements *Excellent benefits include medical with a standard PPO plan with deductibles as low as $1,500 and wellness credit up to $750; free concierge primary care; voluntary 401k plan currently matching up to 12%; voluntary dental and vision plans; free telemedicine services; basic life, long and short term disability coverage. EOE M/F/D/V

Join Our Team! At Petersen our team members are not just employees they are members of the Petersen- A Precinmac community. We recognize that a company is only as good as it's team members and ours are incredible! Petersen offers a competitive benefits package which includes 4x10 work schedule, food market breakrooms. Competitive wage, quarterly bonuses, referral bonuses for selected positions. Wellness program, medical, dental, vision, disability, life, 401k with employer match. Paid time off, and holiday pay. On the job training programs and training reimbursement. We also offer multiple team member engagement activities and community events. Fitter/Welder Level III / IV (Tig Welder) Farr West, UT Job Summary: Will read blueprints, fit and/or oversee fitting, expedite parts, weld and/or oversee welding. Take ownership of job to meet customer and schedule requirements. Essential Functions: Read blueprints Be able to supervise a crew and complete a job from start to finish without direct supervision Expedite all parts throughout the plant as necessary to meet production goals Solve all obstacles related to the job he/she is running Take ownership for meeting customer and schedule requirements Be a living example of our principles of unity, trust, honesty, integrity, creativity, and self-reliance Knowledge, Skills, and Abilities: Must be able to make all welds uniform and clean, and complete work to customer's specifications Pass Blueprint test: Read all weld symbols on a blueprint Differentiate between channel, angle, flat bar, square tube, pipe etc. Pass basic plate weld test (visual and bend) within specified time requirements, in four out of the five weld processes used at Petersen Inc: F.C.A.W. - Stainless and mild steel: 3G, and 6G position G.M.A.W. - Mild steel: 3G position G.T.A.W. - Stainless and aluminum: 3G, and 6G position S.A.W. - Sub arc: 1G position is a plus but no required Must know how to calculate Arc length and circumference Know how to calculate Bolt Circles, Chord Length, and Flat Pattern Must be able to work well in a team environment Able to listen well, understand concerns, and gain cooperation to solve problems quickly and effectively. Must be efficient and productive with time Must maintain an acceptable attendance and safety record Maintain safe environment. Minimum Requirements: High School education or GED preferred. Four years of shop or field welding. Must be able to understand implicit and explicit instructions and react favorably in all work situations. Must be able to resolve problems, handle conflicts, and make effective decisions under pressure. Ability to do math calculations, especially trigonometry. Essential Physical Functions: Requires lifting, stooping, bending and stretching to accomplish grinding, welding and other assigned duties. Requires ability to work at different heights. Requires correctable vision to within normal range to perform clean and uniform welds and read blueprints. Requires standing, bending and stooping for extended periods of time. Safety Requirements: Must not pose a direct threat or significant risk of substantial harm to the safety or health of himself/herself or others Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all the employer's safety policies and rules and must be willing to report safety violations and potential safety violations to appropriate supervisory or management personnel. Equipment Used (but not limited to): Welder, Grinder, Gouge, Drills, Tools. Travel: Must be available and willing to travel as the employer determines is necessary or desirable to meet its business needs. Working Conditions: Works in a typical fabrication shop environment. Occasionally called upon to work overtime. Working conditions may vary according to weather. Requires ability to work in heat and cold/ Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time Petersen is proud to be an Equal Opportunity, Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, or veteran status. If you are unable to complete this application due to a disability, contact Petersen at ************ to ask for an accommodation or an alternative application process. Petersen participates in E-Verify, the federal program for electronic verifications of employment eligibility.

At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. **Job Description** Follow all health, safely, and environmental requirements ; Perform cleanup duties ; Perform material handling and storage duties ; Identify, use, and care of common hand and power tools ; Use and care of craft specific tools and equipment ; Knowledge and application of craft related mathematics ; Knowledge and application of common hitches, Emergency stop signal, Basic crane hand signals, Knot tying (bowline & clove hitch), and use of rigging equipment relevant to craft specific tasks ; Knowledge and use of safety standards and best safety practices relevant to rigging, Inspection of rigging equipment and hardware ; Review construction drawings and blueprints for specifications to determine work requirements ; Read and interprit welding detail drawings ; Perform oxyfuel cutting operations ; Perform preheat and post-weld heat treatment operations ; Perform base metal preparation ; Joint fit-up and alignment ; Perform welds that meet project quality standards ; Demonstrate ability to weld in required process specific positions ; Perform welding machine/equipment set up and operation ; Proper selection and use of filler material ; Read welding symbols on drawings and specifications ; Perform air carbon arc cutting and gouging ; Perform weld identification **Job Requirements** **"Mental Demands:** Understand and carry out oral instructions; Read and carry out written instructions to perform work tasks; Work at varying heights; Recognize, avoid, and report safety hazards; Assemble and disassemble objects; Operate equipment and power tools **Physical Demands:** See hazards, safety warnings, and barriers; Bend knees for lifting and routine work tasks; Stoop for work positioning and lifting to perform work tasks; Lift maximum 50 lbs without assistance; Ability to comprehend, and respond to audible/visual instructions, alarms and warnings; Climb/balance on ladders, scaffolding, and structures for work tasks; Kneel for work positioning and work task performance; Reach above shoulders and away from body to perform work tasks; Demonstrate manual dexterity to perform work tasks **Working Conditions:** Work in extreme heat or cold; Work where noise level is above 85 decibels; Work in wet/humid environment; Work in cramped quarters; Work in environment of fluctuating ventilation; Work inside and outside" We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Market Rate Statement: The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate's qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role. Benefits Statement: Fluor is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental and vision plans, EAP, disability coverage, life insurance, AD&D, voluntary benefit plans, 401(k) with a company match, paid time off (personal, bereavement, sick, holidays) for salaried employees, parental leave, and training and development courses. Notice to Candidates: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references, passport verifications and Global Watchlist screening. To be Considered Candidates: Must be authorized to work in the country where the position is located. Salary Range: -

Join Our Team! At Petersen our team members are not just employees they are members of the Petersen- A Precinmac community. We recognize that a company is only as good as it's team members and ours are incredible! Petersen offers a competitive benefits package which includes 4x10 work schedule, food market breakrooms. Competitive wage, quarterly bonuses, referral bonuses for selected positions. Wellness program, medical, dental, vision, disability, life, 401k with employer match. Paid time off, and holiday pay. On the job training programs and training reimbursement. We also offer multiple team member engagement activities and community events. Fitter/Welder Level III / IV (Tig Welder) Farr West, UT Job Summary: Will read blueprints, fit and/or oversee fitting, expedite parts, weld and/or oversee welding. Take ownership of job to meet customer and schedule requirements. Essential Functions: * Read blueprints * Be able to supervise a crew and complete a job from start to finish without direct supervision * Expedite all parts throughout the plant as necessary to meet production goals * Solve all obstacles related to the job he/she is running * Take ownership for meeting customer and schedule requirements * Be a living example of our principles of unity, trust, honesty, integrity, creativity, and self-reliance Knowledge, Skills, and Abilities: * Must be able to make all welds uniform and clean, and complete work to customer's specifications * Pass Blueprint test: * Read all weld symbols on a blueprint * Differentiate between channel, angle, flat bar, square tube, pipe etc. * Pass basic plate weld test (visual and bend) within specified time requirements, in four out of the five weld processes used at Petersen Inc: * F.C.A.W. - Stainless and mild steel: 3G, and 6G position * G.M.A.W. - Mild steel: 3G position * G.T.A.W. - Stainless and aluminum: 3G, and 6G position * S.A.W. - Sub arc: 1G position is a plus but no required * Must know how to calculate Arc length and circumference * Know how to calculate Bolt Circles, Chord Length, and Flat Pattern * Must be able to work well in a team environment * Able to listen well, understand concerns, and gain cooperation to solve problems quickly and effectively. * Must be efficient and productive with time * Must maintain an acceptable attendance and safety record * Maintain safe environment. Minimum Requirements: High School education or GED preferred. Four years of shop or field welding. Must be able to understand implicit and explicit instructions and react favorably in all work situations. Must be able to resolve problems, handle conflicts, and make effective decisions under pressure. Ability to do math calculations, especially trigonometry. Essential Physical Functions: Requires lifting, stooping, bending and stretching to accomplish grinding, welding and other assigned duties. Requires ability to work at different heights. Requires correctable vision to within normal range to perform clean and uniform welds and read blueprints. Requires standing, bending and stooping for extended periods of time. Safety Requirements: * Must not pose a direct threat or significant risk of substantial harm to the safety or health of himself/herself or others * Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all the employer's safety policies and rules and must be willing to report safety violations and potential safety violations to appropriate supervisory or management personnel. Equipment Used (but not limited to): Welder, Grinder, Gouge, Drills, Tools. Travel: Must be available and willing to travel as the employer determines is necessary or desirable to meet its business needs. Working Conditions: Works in a typical fabrication shop environment. Occasionally called upon to work overtime. Working conditions may vary according to weather. Requires ability to work in heat and cold/ Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time Petersen is proud to be an Equal Opportunity, Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, or veteran status. If you are unable to complete this application due to a disability, contact Petersen at ************ to ask for an accommodation or an alternative application process. Petersen participates in E-Verify, the federal program for electronic verifications of employment eligibility.

Who We Are: Lippert is a leading, global manufacturer and supplier of highly engineered products and customized solutions, dedicated to shaping, growing and bettering the RV, marine, automotive, commercial vehicle and building products industries. We combine our strategic manufacturing capabilities with the power of our winning team culture to deliver unrivaled customer service, award-winning innovation, and premium products to all of our customers. Why We are Different: At Lippert, Everyone Matters. This is not just a tagline or empty promise; it is who we are. We have intentionally created a culture that values and celebrates our team members' unique and varied backgrounds, perspectives, and experiences. We strive to give our team members a deeper sense of purpose at work, and we continue to build a better work environment by aligning our cultural and business strategies with the needs of our team members. What You will Get: * A unique, inclusive and supportive company culture. * Comprehensive benefit offerings including medical, dental, vision, 401k with employer match, vacation, and more! * Fair and competitive compensation. * Career development and mentoring and opportunities to grow. * Holiday, personal and vacation days. Summary/Objective: The Welder is responsible for adding value in the process flow by accurately assembling various components and/or sub-assemblies into specified fixturing and joining by welding or repairing defective welds Required Education and Experience * Experience in a manufacturing environment a plus * Essential Functions: * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Observance of all safety rules and policies maintained by the company. * Maintenance of a clean and organized workspace and Plant proper. * Picking and placing components or subassemblies into proper fixturing and joining by the application of GMAW (Gas-Metal-Arc Welding.) * Exercising product and process knowledge to identify out-of-conformance situations and alert supervisor or Quality Auditor of these situations in a timely manner. * Rotation of position into different production teams as is necessary to meet production schedules and Company goals in general. * Maintenance of good housekeeping practices always. * Ability to set up welding equipment including changing gas Competencies: * Communication skills * Organizational skills * Initiative * Time management * Friendly/understanding Supervisory Responsibility: This position has no supervisory responsibility. Physical Demands: While performing duties of the job, the team member is regularly required to talk and hear. This position is very active - while performing this job the team member is regularly standing, walking, bending, kneeling, stooping, crouching, crawling, balancing, reaching, handling, and climbing all day. The team member may have to lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job. Reasonable accommodations considered for individuals with disabilities to enable them to perform the essential functions. While performing the duties of this Job, the team member works around moving mechanical parts, heavy equipment, and conveyer roller lines. The team member may work in outside weather conditions in all seasons. The noise level in the work environment is usually moderate to loud. In addition, the team member may be exposed to dust, fumes, gases, noise, heat, cold, and wet work while performing job duties. This position requires personal protective equipment such as work gloves, safety glasses, ear plugs, cut resistant sleeves, and seasonal gear which will be provided (contingent on position). Additional items required but not included are steel toed shoes or boots with metatarsal guards. Position Type/Expected Hours of Work This is a full-time hourly position, and hours of work and days are typically Monday - Thursday 3:30pm-2:00am Travel: There is no travel with this position. Work Authorization/Security Clearance Must be legally authorized to work in the United States. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the Team Member for this job. Duties, responsibilities, and activities may change at any time with or without notice. Pay Group : AAP/EEO Statement Lippert provides equal employment opportunity to all team members and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, ancestry, age, genetic information, disability, citizen status, protected veteran status, military service, marital status or any other legally protected category as established by federal, state, or local law. This policy governs all employment decisions, including recruitment, hiring, job assignment, compensation, training, promotion, discipline, transfer, leave-of-absence, access to benefits, layoff, recall, termination and other personnel matters. All employment and personnel-related decisions are based solely upon legitimate, job-related factors, such as skill, ability, past performance, and length of service with Lippert. Lippert's strong commitment to equal employment opportunity requires a commitment by each individual team member. Compliance with the letter and spirit of this policy is required of all team members. Violations of this policy should be immediately reported to your leader or to any member of leadership. Team members who violate this policy will be subject to disciplinary action, up to and including termination of employment. Know Your Rights

Job Details Division: Nucor Buildings Group West LLC Other Available Locations: N/A Structural Fitter/Welder Are you a skilled welder with a passion for precision and a commitment to safety and quality? Nucor Buildings Group West is looking for a dedicated Structural Welder/Fitter to join our team. In this role, you will be responsible for performing high-quality welds on steel structural components, ensuring strong, accurate, and compliant welds while maintaining the highest safety standards. Please ensure that you attach your resume along with your application. Applications submitted without a resume will not be considered. Basic Job Functions: Welding Steel Structural Components: Complete welding on structural steel components as directed, maintaining safety and quality standards. Team Collaboration: Work closely with a welding partner to weld and fit components, ensuring smooth coordination and the delivery of high-quality results. Machine Operation: Use equipment such as cranes, transfers, and magnetic drills to assist with part fabrication and welding processes. Visual Inspections: Conduct full visual inspections of welded parts to ensure all welds are applied correctly and meet quality standards. Effective Communication: Collaborate with upstream and downstream teams to address safety, quality, and efficiency concerns, ensuring a smooth workflow and successful project completion. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: Able to pass a GMAW Weld Test Proficient in MIG welding techniques with a solid understanding of welding principles Ability to conduct thorough visual inspections of welded parts for quality and compliance. Competent in with measuring tools. Willingness to work either 2nd or 3rd shift schedules (2nd shift typically 2 PM-10 PM; 3rd shift typically 10 PM-6 AM). Please ensure that you attach your resume along with your application. Applications submitted without a resume will not be considered. Preferred Qualifications: 6 months experience operating grinders, cranes, transfers, and magnetic drills. Current welding certifications Welding degree from an accredited technical college or equivalent experience in welding Ability to read and interpret blueprints, schematics, and technical drawings. Why Nucor? Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. About Us: Nucor Buildings Group (NBG), a proud Nucor product group, is one of North America's largest and most experienced manufacturers of metal building systems. With multiple locations throughout the United States, NBG is proud to design world-class building solutions tailored to meet the needs of any market including commercial, industrial, agricultural, and institutional. Our brands include American Buildings, CBC Steel Buildings, Kirby Building Systems, and Nucor Building Systems. NBG offers work/life balance and a variety of benefits and performance incentives. We take pride in connecting teammates to meaningful work and focus heavily on both personal and professional development. Whether your background is in engineering and design, information technology and software development, marketing, or sales, with Nucor Buildings Group you can go as far as your drive and ambition will take you. #LI-KR1 Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

WELDER III *Compensation Range: $24 - $35/hr Per Diem: N/A Job Status: Hourly, Full Time, Non-Exempt Travel Requirements: 0% Seeking highly motivated individual to join a high paced dynamic work environment. Are you a safe and reliable Welder Fitter who wants a career where you can grow and develop your skills with one of Utah's fastest growing Industrial contractors? We want to hear from you! Great Basin Industrial is a drug free workplace and all applicants must pass a pre-employment drug test and weld test. Day shift positions are available with a Monday through Thursday schedule. Occasionally Fridays and some Saturdays will be required. Requirements Duties & Qualifications: Experienced welder with 5+ yrs shop experience preferred but not mandatory. Ability to consistently put down quality welds that will pass X-Ray and Visual inspections on Carbon Steel, Stainless Steel and various Alloys in multiple positions using multiple processes. Ability to set up and run most fabrication equipment Ability to read and understand blueprints and accurately fit assemblies from them. We want reliable employees with Strong work ethic and Drive. Must be a team player, have a positive attitude and work well with others. Preference will be given to applicants with previous experience working on ASME and API Tanks/vessels and/or pipe assemblies. *Wage based on experience and quality of work. Benefits Vacation Leave & Holiday Pay Sick Leave & Paid Time Off 401(k) Health / Dental / Vision Insurance Life Insurance Health Savings Accounts (HSAs) Long-Term & Short-Term Disability Introduction to the GB Nation: Great Basin Industrial provides Turnkey Industrial Fabrication, Construction, & Maintenance for many of the world's leading companies within the petroleum, power, and mining industries. Although headquartered in Kaysville, Utah, we operate fixed-site facilities in Utah, Wyoming, New Mexico, Texas, and Colorado that support construction sites throughout the U.S. and Canada. Our mission is simply: To Build Our Futures and America Stronger Why You'll Love Us: DRIVEN We Always Find a Way to Win We are Passionate, Accountable, and Humbly Confident BUILDING We Build People, Teams, and America We Learn, Share and Grow with Purpose EXCELLENCE We Skillfully Execute, Solve Problems and Hold the Line We Take Ownership, Embrace Process and Strive to Be the Best TOGETHER We Ride for the Brand with Gratitude and Honest Work We Put Employees First with Genuine Compassion and We are a drug-free workplace. DEI Statement: We are committed to providing an inclusive environment that ensures the happiness and success of each of our associates. We pride ourselves on hiring, training, and retaining a community of employees from various backgrounds, perspectives, and experiences. EEO Statement: We are an equal opportunity employer that does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. #ZR

Pay: $54,000 annually Work schedule: Monday through Friday, 7:45am to 4:45pm NO WEEKENDS/ NO EVENINGS! Our staff also enjoy these benefits: * Health, dental, vision, prescription drug and life insurance * 401(k) retirement plan * Short and long-term disability * Paid time off and paid holidays * Professional development assistance * Career advancement opportunities Tired of the stress and pressure of production schedules? Then come join the relaxed atmosphere of the Welding Instructor at the Clearfield Job Corps Center in Clearfield, Utah. What you'll be doing: Teaching youth, 16-24 years of age a trade in welding, this is an opportunity to teach today's youth a career that has always been and remains in high demand in today's industry! Essential functions: * Provide students with direction, instruction, and assistance in designated areas of instruction. * Motivate and counsel students in areas of behavior, training, personal problems, or study habits. * Coordinate with counselors and staff as necessary to resolve issues affecting student training and/ or instruction. * Develop and prepare lessons in accordance with approved curriculum guidelines, recommend curricula changes and supplemental materials. * Maintain organized, clean, and safe training environment. * Participate in student assessment panels, perform required documentation and evaluation using CIS (Center Information System) and other documentation systems. Education and Experience Requirements: * HSD/ GED required * Utah state certificate with an endorsement in welding or certified welding educator (CWE) through American Welding Society (AWS) or National Center for Construction Education and Research (NCCER) Certified Craft Instructor. * Experience with youth, excellent written and verbal communications skills and computer proficiency required. * A valid driver license with an acceptable driving record. Why: Make a positive impact in your community by doing meaningful work that results in a rewarding career. Management & Training Corporation (MTC) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, disabled status, veteran status, genetic information, national origin, or any other category protected by federal law. MTC participates in E-Verify. We strive to provide reasonable accommodation for qualified individuals with disabilities, including disabled veterans, in our job application and hiring process. If you are interested in employment opportunities with Management & Training Corporation and need assistance, please contact our staffing department through ***************************** or ************.

Wage : $60,000+ based on experience Schedule - Full Time, 8hr shifts, Monday - Friday 7:45am to 4:45pm Our staff also enjoy these benefits: Health, dental, vision, prescription drug, and life insurance Short & long-term disability 401(k) retirement plan Paid time off and paid holidays Professional development assistance Career advancement opportunities MTC is proud to operate the Clearfield Job Corps Center in Clearfield, UT where our staff provide quality services to our local youth. We value our professional and caring employees who are dedicated to improving people's lives and we want YOU to join our team! What you'll be doing: Teaching youth, 16-24 years of age in the welding processes of SMAW, GMAW, GMAW/SPRAY, FCAWG. FCAWS and GTAW in the D . 1 . 1 structural welding code. This is an opportunity to teach today's youth a career that has always been and remains in high demand in today's industry. Essential functions: Provide students with direction, instruction, and assistance in designated areas of instruction. Motivate and counsel students in areas of behavior, training, personal problems, or study habits. Coordinate with counselors and staff as necessary to resolve issues affecting student training and/ or instruction. Develop and prepare lessons in accordance with approved curriculum guidelines, recommend curricula changes, and supplemental materials. Maintain an organized, clean, and safe training environment. Education and Experience Requirements: HSD/ GED required Utah state teaching certificate with an endorsement in Welding or Certified Welding Inspector (CWI), Certified Welding Educator (CWE) through American Welding Society (AWS), or National Center for Construction Education and Research (NCCER) Certified Craft Instructor. In addition, must have 6G Certification in SMAW and GMAW or FCAW-G, and be familiar with the American Petroleum Institute (API) code Experience with youth, excellent written and verbal communications skills and computer proficiency required. A valid driver license with an acceptable driving record. Why: Make a positive impact in your community by doing meaningful work that results in a rewarding career. Management & Training Corporation (MTC) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, disabled status, veteran status, genetic information, national origin, or any other category protected by federal law. MTC participates in E-Verify. We strive to provide reasonable accommodation for qualified individuals with disabilities, including disabled veterans, in our job application and hiring process. If you are interested in employment opportunities with Management & Training Corporation and need assistance, please contact our staffing department through ***************************** or ************.

Join Our Team! At Petersen our team members are not just employees they are members of the Petersen- A Precinmac community. We recognize that a company is only as good as it's team members and ours are incredible! Petersen offers a competitive benefits package which includes 4x10 work schedule, food market breakrooms. Competitive wage, quarterly bonuses, referral bonuses for selected positions. Wellness program, medical, dental, vision, disability, life, 401k with employer match. Paid time off, and holiday pay. On the job training programs and training reimbursement. We also offer multiple team member engagement activities and community events. Fitter/Welder Level II Farr West, UT Job Summary: Will read blueprints, fit and/or oversee fitting, expedite parts, weld and/or oversee welding. Take ownership of job to meet customer and schedule requirements. Essential Functions: * Read blueprints * Be able to supervise a crew and complete a job from start to finish without direct supervision * Expedite all parts throughout the plant as necessary to meet production goals * Solve all obstacles related to the job he/she is running * Take ownership for meeting customer and schedule requirements * Be a living example of our principles of unity, trust, honesty, integrity, creativity, and self-reliance Knowledge, Skills, and Abilities: * Must be able to make all welds uniform and clean, and complete work to customer's specifications * Pass Blueprint test: * Read all weld symbols on a blueprint * Differentiate between channel, angle, flat bar, square tube, pipe etc. * Pass basic plate weld test (visual and bend) within specified time requirements, in four out of the five weld processes used at Petersen Inc: * F.C.A.W. - Stainless and mild steel: 3G, and 6G position * G.M.A.W. - Mild steel: 3G position * G.T.A.W. - Stainless and aluminum: 3G, and 6G position * S.A.W. - Sub arc: 1G position is a plus but no required * Must know how to calculate Arc length and circumference * Know how to calculate Bolt Circles, Chord Length, and Flat Pattern * Must be able to work well in a team environment * Able to listen well, understand concerns, and gain cooperation to solve problems quickly and effectively. * Must be efficient and productive with time * Must maintain an acceptable attendance and safety record * Maintain safe environment. Minimum Requirements: High School education or GED preferred. Four years of shop or field welding. Must be able to understand implicit and explicit instructions and react favorably in all work situations. Must be able to resolve problems, handle conflicts, and make effective decisions under pressure. Ability to do math calculations, especially trigonometry. Essential Physical Functions: Requires lifting, stooping, bending and stretching to accomplish grinding, welding and other assigned duties. Requires ability to work at different heights. Requires correctable vision to within normal range to perform clean and uniform welds and read blueprints. Requires standing, bending and stooping for extended periods of time. Safety Requirements: * Must not pose a direct threat or significant risk of substantial harm to the safety or health of himself/herself or others * Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all the employer's safety policies and rules and must be willing to report safety violations and potential safety violations to appropriate supervisory or management personnel. Equipment Used (but not limited to): Welder, Grinder, Gouge, Drills, Tools. Travel: Must be available and willing to travel as the employer determines is necessary or desirable to meet its business needs. Working Conditions: Works in a typical fabrication shop environment. Occasionally called upon to work overtime. Working conditions may vary according to weather. Requires ability to work in heat and cold/ Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time Petersen is proud to be an Equal Opportunity, Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, or veteran status. If you are unable to complete this application due to a disability, contact Petersen at ************ to ask for an accommodation or an alternative application process. Petersen participates in E-Verify, the federal program for electronic verifications of employment eligibility.

Job Details Division: Nucor Towers & Structures Inc Other Available Locations: N/A Expand Beyond with Nucor Nucor Towers and Structures (NTS) is a new entity within Nucor, the largest recycler and largest manufacturer of steel and steel products in North America, focused on the execution of our strategy to “Expand Beyond” our core business. As a part of Nucor's New Markets product group, NTS is focused on the exciting growth potential in the power distribution market. Current production facility is in West Hazleton, PA, with plans to build a national footprint. For a brief video about NTS, please visit the following link: NTS Update Video Why Nucor? With a firm commitment to our teammates, strong benefits and performance incentives, it's easy to see why Nucor is named one of America's best employers and ranked as the #1 employer in its industry by Fortune Magazine. For more information on our benefits go to Nucor.com/benefits. We work together to create a safe, positive, and engaging environment. While delivering the highest quality products and service for our customers, we lead the steel industry in environmental responsibility. Joining our team means working with people who have your back and are invested in helping you build a strong future. You will never stop learning at Nucor - and when you are ready to take the next step in your career, we're ready, too. Basic Job Functions: Nucor Towers & Structures Utah is seeking qualified applicants for the position of Fitter Welder. The role of a Fitter Welder serves a vital part within the facility's production team. Responsibilities include, but are not limited to: Welding structural steel parts as specified per drawing or print. Safely produce a quality product Maintaining housekeeping Obtain and maintain all welding certifications. Assure the structural components are welded correctly with visual inspection. Willing to work swing shifts The fitter welder will be an integral member of the Nucor Towers & Structure team who brings a strong and consistent work ethic, demonstrates the attention to detail needed to ensure that the material is being sent with the quality that the customers expect from Nucor, and exhibits good communication skills that will enable them to coordinate with other departments. A successful candidate must be able to work independently as well as in a group and be willing and able to work weekends and holidays as operating conditions require. To ensure the success of the Nucor Towers & Structures team, safety must be at the forefront of each duty that is performed by each teammate. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: High school diploma or equivalent Preferred Qualifications: Manufacturing/production environment experience Experience with reading different measuring devices: tape measure, gauges, micrometers Ability to read and understand blueprints Knowledge of weld symbols and weld defects Ability to pass a 3G Weld Test within 30 days of hire Knowledge or utilization of air arc gouging and plasma torch Ability to operate a crane (Standard Overhead Crane) Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

Job Description Looking for experienced Storage Tank welders to staff several upcoming jobs. Must provide resume showing Tank Experience to be considered for position. Reliable transportation is a must. Wage is based on weld test and experience. Pay Range $26-$34. We work Nationwide and our Headquarters is located in Kaysville, UT. This is a full time position where you are eligible for benefits, PTO, Show-up pay, Per diem $700 a week, 401K after 1 yr of service, bonus programs and incentives. We put you to work with a crew and then you move with the crew from job to job. We try to keep you working as much as possible. But it is construction so we only have so much control. Requirements Must be able to pass a DISA drug test and Background Check. Benefits Full time position: Eligible for benefits (Medical, Dental, Vision, PTO, Show-up pay, Per diem $700 a week, 401K with match after 1 yr of service, bonus programs and incentives. #ZR

**Pay: $54,000 annually** **Work schedule:** Monday through Friday, 7:45am to 4:45pm **NO WEEKENDS/ NO EVENINGS!** **Our staff also enjoy these benefits:** + Health, dental, vision, prescription drug and life insurance + 401(k) retirement plan + Short and long-term disability + Paid time off and paid holidays + Professional development assistance + Career advancement opportunities Tired of the stress and pressure of production schedules? Then come join the relaxed atmosphere of the **Welding** **Instructor** at the **Clearfield Job Corps Center** in **Clearfield, Utah** . **What you'll be doing:** Teaching youth, 16-24 years of age a trade in welding, this is an opportunity to teach today's youth a career that has always been and remains in high demand in today's industry! **Essential functions:** + Provide students with direction, instruction, and assistance in designated areas of instruction. + Motivate and counsel students in areas of behavior, training, personal problems, or study habits. + Coordinate with counselors and staff as necessary to resolve issues affecting student training and/ or instruction. + Develop and prepare lessons in accordance with approved curriculum guidelines, recommend curricula changes and supplemental materials. + Maintain organized, clean, and safe training environment. + Participate in student assessment panels, perform required documentation and evaluation using CIS (Center Information System) and other documentation systems. **Education and Experience Requirements:** + HSD/ GED required + Utah state certificate with an endorsement in welding or certified welding educator (CWE) through American Welding Society (AWS) or National Center for Construction Education and Research (NCCER) Certified Craft Instructor. + Experience with youth, excellent written and verbal communications skills and computer proficiency required. + A valid driver license with an acceptable driving record. **Why:** Make a positive impact in your community by doing meaningful work that results in a rewarding career. Management & Training Corporation (MTC) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, disabled status, veteran status, genetic information, national origin, or any other category protected by federal law. MTC participates in E-Verify. We strive to provide reasonable accommodation for qualified individuals with disabilities, including disabled veterans, in our job application and hiring process. If you are interested in employment opportunities with Management & Training Corporation and need assistance, please contact our staffing department through ***************************** or ************.

Looking for experienced Storage Tank welders to staff several upcoming jobs. Must provide resume showing Tank Experience to be considered for position. Reliable transportation is a must. Wage is based on weld test and experience. Pay Range $26-$34. We work Nationwide and our Headquarters is located in Kaysville, UT. This is a full time position where you are eligible for benefits, PTO, Show-up pay, Per diem $700 a week, 401K after 1 yr of service, bonus programs and incentives. We put you to work with a crew and then you move with the crew from job to job. We try to keep you working as much as possible. But it is construction so we only have so much control. Requirements Must be able to pass a DISA drug test and Background Check. Benefits Full time position: Eligible for benefits (Medical, Dental, Vision, PTO, Show-up pay, Per diem $700 a week, 401K with match after 1 yr of service, bonus programs and incentives. #ZR

Pay: $54,000 annually Work schedule: Monday through Friday, 7:45am to 4:45pm NO WEEKENDS/ NO EVENINGS! Our staff also enjoy these benefits: Health, dental, vision, prescription drug and life insurance 401(k) retirement plan Short and long-term disability Paid time off and paid holidays Professional development assistance Career advancement opportunities Tired of the stress and pressure of production schedules? Then come join the relaxed atmosphere of the Welding Instructor at the Clearfield Job Corps Center in Clearfield, Utah. What you'll be doing: Teaching youth, 16-24 years of age a trade in welding, this is an opportunity to teach today's youth a career that has always been and remains in high demand in today's industry! Essential functions: Provide students with direction, instruction, and assistance in designated areas of instruction. Motivate and counsel students in areas of behavior, training, personal problems, or study habits. Coordinate with counselors and staff as necessary to resolve issues affecting student training and/ or instruction. Develop and prepare lessons in accordance with approved curriculum guidelines, recommend curricula changes and supplemental materials. Maintain organized, clean, and safe training environment. Participate in student assessment panels, perform required documentation and evaluation using CIS (Center Information System) and other documentation systems. Education and Experience Requirements: HSD/ GED required Utah state certificate with an endorsement in welding or certified welding educator (CWE) through American Welding Society (AWS) or National Center for Construction Education and Research (NCCER) Certified Craft Instructor. Experience with youth, excellent written and verbal communications skills and computer proficiency required. A valid driver license with an acceptable driving record. Why: Make a positive impact in your community by doing meaningful work that results in a rewarding career. Management & Training Corporation (MTC) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, disabled status, veteran status, genetic information, national origin, or any other category protected by federal law. MTC participates in E-Verify. We strive to provide reasonable accommodation for qualified individuals with disabilities, including disabled veterans, in our job application and hiring process. If you are interested in employment opportunities with Management & Training Corporation and need assistance, please contact our staffing department through ***************************** or ************.