Welder jobs in Lumberton, NC - 555 jobs

Job Purpose Honda Aero, in Burlington, North Carolina, is looking for a team member who is a Fabricator with GTAW experience responsible for the fabrication and welding of aerospace sheet metal and casting engine components. Possesses the welding ability to certify to Aerospace Specifications for thin stainless, nickel based (Inconel), and other aerospace sheet metal. Key Accountabilities Set-up and layout jobs using work instructions, diagrams and fixtures following procedures to fabricate and GTAW in all positions including the use of rotary turntables. • Sets up machines according to work instructions to trim, size, form, inspect, clean, and GTAW material to meet requirements. • Inspects, maintains and logs preventative maintenance on equipment needed for fabricating and welding. • Fabrication of shop aids and fixtures to assist fabrication and welding. • Quality checks using gauges, calipers, micrometers, height gauges, etc. • Weld evaluations for weld size, face and root reinforcement, cracks, inclusions, and porosity. • Must maintain internal skills matrix. • Must maintain HAI welding certifications. • Complies with internal quality system and regulatory requirements. • Lean Manufacturing, general housekeeping, work in a teaming environment, 5S and COP. • Cleans work area, tools, and equipment at end of shift. • Follow all business policies and procedures. • Performs other duties as assigned. Qualifications, Experience, and Skills Minimum Educational Qualifications HS diploma or GED. Minimum Experience Minimum of 5 years of hands-on Fabrication and minimum of 5 years of hands-on GTAW experience, both preferably in the aerospace industry. Knowledge of super alloy processing preferred. AWS or equivalent certifications preferred, but not required. Other Job-Specific Skills Ability to work independently and take on new challenges and assignments. Good attention to detail and eye/hand coordination skills. Uses mathematical and reading skills. Interprets specifications, blueprints, and work instructions. Working Conditions Climate-controlled production environment. Regular exposure to the manufacturing areas which under certain circumstances require the use of personal protective equipment such as safety glasses with side shields, mandatory hearing protection and safety shoes. Ability to frequently stand, walk, and sit as well as regular use of hands, fingers, and arms. Ability to lift up to 30 pounds.

MAU is hiring a TIG Welder for our client in Columbia, SC. As a TIG Welder, you will perform high-quality welds on pipe and structural steel assemblies, ensuring all work meets ASME pressure vessel and piping codes. This is a direct-hire opportunity. Benefits Package: 401(k) Health insurance Paid time off Opportunity for advancement On-the-job training Shift Information: Monday-Thursday | 6:00 AM - 4:30 PM Occasional Fridays required Required Education and Experience: 2+ years of on-the-job TIG welding experience Experience welding pipe diameters ranging from ½" to 36" in all positions Experience welding structural steel in all positions No high school diploma or GED required General Requirements: Must pass weld test in fixed 6G position Must be able to operate high-frequency amperage control foot pedal Must be able to identify correct filler wire for given base metal Ability to interpret drawings and welding symbols for pipe assemblies and skids Must be able to calculate pipe fittings “take-outs” and piping measurements Essential Functions: Ensure all welds pass ASME pressure vessel and piping codes Prep pipe fittings and pipe ends for full penetration welds Perform GTA welding on carbon steel, stainless steel, and duplex stainless steel Interpret fabrication drawings and welding symbols Calculate accurate measurements for pipe assembly Working Conditions: Work performed in a fabrication shop environment Cleaner than average shop No travel required Positive and supportive work environment Physical Demands: Must be able to perform TIG welding in a fixed 6G position MAU Workforce Solutions is an innovative global company with extensive experience providing solutions for success in staffing, recruiting, technology and outsourcing to our clients, employees, and applicants. Headquartered in Augusta, GA since 1973, MAU is a family and minority-owned company offering better processes and better people to create efficiencies and greater profits for our clients. Our relationships with world-class companies, our training programs and our culture of family allow MAU to offer better results, better jobs, and better lives to those who work with us. All Applicants must submit to background check and drug screening Disclaimer: This job description is not designed to be a complete list of all duties and responsibilities required of the position EOE

This employee will perform in the field and as necessary in the shop. Currently travel up to 25% of time and will work some non-local jobs for 3-week period time frames. Qualifications Must have experience with PIPE welding. Must have ability to weld to a qualified procedure using SMAW (STICK) and GTAW (TIG) Ability to read and understand blue prints A 6G ASME test on 2-inch pipe will be required before starting work Able to use hand tools (measuring tape, level and channel lock), man lifts, platform lifts, fork lifts, rigging and erecting equipment Physical Requirement Able to work 10 hour days most of the time Stand, walk and climb stairs up to 12 hours per day Stoop, bend, turn, twist and reach repeatedly throughout day Life and carry up to 50 lbs up and down ladders repeatedly Able to work in cold and hot environments What we offer Supportive work environment Opportunity to learn additional skills as well as upward mobility Eight paid holidays Two weeks of vacation first year Company paid life insurance, short and long term disability 401(k) match of 100% up to 4% Must have reliable transportation. Pre-employment drug test required. Combination Welder Fitter experience is preferred. AC Corporation is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Learn more about us at: ***************************

At Atomic Transport, we take pride in being a leading local bulk hauling company based out of Chattanooga, TN with a dedicated fleet of company-owned assets and W2 driver employees that specialize in waste transportation from local transfer stations to landfills. With over twenty-five terminals operating locally throughout the Southeast and Midwest, if you are looking for a team to grow with, Atomic Transport is seeking an experienced Aluminum Welder & Fabricator to join our Greenville, SC location. Join us in shaping a cleaner and safer future while growing your career with Atomic Transport. Aluminum Welder & Fabricator/Mechanic Responsibilities: Primary function is aluminum welding & fabrication in trailer repair shop Perform minor and major repairs on aluminum open-top trailers. Conduct regular maintenance and repairs on aluminum open-top trailers. Maintain a safe and clean work environment. Diagnose problems and plan repairs. Perform regular diagnostic tests on trucks. Maintain accurate records of each repair performed on vehicles. The ability to work as a team or in a solo setting. Must have own basic hand tools. Specialty and larger tools will be provided. Job Type: Full-time Pay: $25.00 - $38.00 per hour depending on experience! Schedule: Monday-Friday Half days on Saturday's Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance Aluminum Welder & Fabricator/Mechanic Requirements: Must have a Valid driver's license (CDLA is Plus!) Must pass a pre-employment background check. Must pass a pre-employment drug test. Must have a minimum of 2 years of welder, Mechanic or fabricator experience. Must have the ability to work early mornings & evenings. Call Chris Dean for more information: ************

Requirements Skills and Qualifications: Technical Knowledge: Understanding of piping systems, materials, and installation techniques. Blueprint Reading: Ability to interpret technical drawings and specifications. Mechanical Aptitude: Proficiency in using tools and equipment for cutting, joining, and installing pipes. Problem-Solving Skills: Ability to diagnose and resolve issues in piping systems. Physical Stamina: Pipefitting can be physically demanding, requiring lifting, bending, and working in various positions. Safety Awareness: A strong understanding of safety protocols and procedures. Knowledge of gas installation techniques and standards, has limited experience (preferred). All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations Cinterra provides equal employment opportunities without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Eaton's ES AMER ARS PDCAD division is currently seeking a Welder- 2nd Shift to join our team. The hourly rate for this position is $20.00- $31.29 per hour. The core hours are 2:30pm - 11:00pm. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Welder will perform routine hand-welding or robotic welding on a repetitive and non-repetitive nature on standard and near-standard assemblies. De-burr, grind, and fit components prior to welding. Grind and polish finished elements as required. Block jig or position parts prior to welding. Assist other operators in their work as directed/required. In this function you will: A. Perform work from manufacturing information, bills of material, written and/or oral instructions. B. Utilize manufacturing information, determine necessary parts/inventory, jigs/fixtures, and obtain materials from stock areas. C. Provide assistance to other sheet metal fabricators / operators in performance of their duties as required. D. Deliver material to/from work stations using material handling equipment, position work material on work surface. Ensure correct parts and matching documentation reach next process in a timely fashion. E. Complete necessary preparation work such as wiping, degreasing, de-burring, or grinding of components. F. Pick up and place scrap in appropriate containers. Documentation/record keeping may be required. G. Operate spot welders, arc welders, plasma TIG welder, MIG welder, cutting torch, power grinder, power sanders, hand-tools, bandsaws, drills, temporary fixturing devices, jigs and fixtures, and other metal-fabrication equipment as directed. Inspect parts periodically or as directed utilizing manufacturing information such as drawings / blueprints, make necessary adjustments as required. Keep accurate piece count and other applicable records. Inform Supervisor of any quality problems. H. Maintenance of equipment such as dressing of welding electrodes, oiling/greasing, machine settings, changing of tooling, and minor adjustments may be necessary. Complete necessary maintenance check sheets and inform Supervisor and / or Maintenance personnel of any problems. I. Maintain equipment and work area in a clean and orderly fashion; keeping oil deposits off of floor. J. Observe all health/hygiene and safety policies as directed and specified. K. Other duties as required. Qualifications: Required (Basic) Qualifications: • High school diploma or General Equivalency Degree (GED) • Experienced/demonstrated proficiency of welding techniques, shop blueprint/drawing comprehension, and shop math skills. • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. • No relocation benefit is offered for this position. Only candidates residing within the immediate area (50 miles) will be considered for this position Position Criteria: A. Know and follow established job specific and facility wide health and safety procedures and rules. B. Bring health and safety issues, unsafe acts and safety suggestions to management's attention or correct those they can. C. Actively participate in accident, injury and illness prevention activities: D. Develop job safety analysis and safe working procedures. E. Identify and correct hazards and unsafe conditions. F. Accident, near-miss accident or potential hazard investigations. G. Keep other employees aware of health and safety practices and activities by actively observing fellow employee work practices and incorporating safety. H. Maintain 5S and housekeeping in work area. I. Maintain health and safety equipment in good working order. J. Actively participate in health and safety training and demonstrate competency based on training received. K. Participate actively in providing suggestions for the health and safety program improvement. L. Know and implement regulatory compliance requirements in their work area.

Eaton's ES AMER ARS PDCAD division is currently seeking a Welder- 2nd Shift to join our team. is $20.00- $31.29 per hour. The core hours are 3:45pm-2:15am Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Welder will perform routine hand-welding or robotic welding on a repetitive and non-repetitive nature on standard and near-standard assemblies. De-burr, grind, and fit components prior to welding. Grind and polish finished elements as required. Block jig or position parts prior to welding. Assist other operators in their work as directed/required. In this function you will: A. Perform work from manufacturing information, bills of material, written and/or oral instructions. B. Utilize manufacturing information, determine necessary parts/inventory, jigs/fixtures, and obtain materials from stock areas. C. Provide assistance to other sheet metal fabricators / operators in performance of their duties as required. D. Deliver material to/from work stations using material handling equipment, position work material on work surface. Ensure correct parts and matching documentation reach next process in a timely fashion. E. Complete necessary preparation work such as wiping, degreasing, de-burring, or grinding of components. F. Pick up and place scrap in appropriate containers. Documentation/record keeping may be required. G. Operate spot welders, arc welders, plasma TIG welder, MIG welder, cutting torch, power grinder, power sanders, hand-tools, bandsaws, drills, temporary fixturing devices, jigs and fixtures, and other metal-fabrication equipment as directed. Inspect parts periodically or as directed utilizing manufacturing information such as drawings / blueprints, make necessary adjustments as required. Keep accurate piece count and other applicable records. Inform Supervisor of any quality problems. H. Maintenance of equipment such as dressing of welding electrodes, oiling/greasing, machine settings, changing of tooling, and minor adjustments may be necessary. Complete necessary maintenance check sheets and inform Supervisor and / or Maintenance personnel of any problems. I. Maintain equipment and work area in a clean and orderly fashion; keeping oil deposits off of floor. J. Observe all health/hygiene and safety policies as directed and specified. K. Other duties as required. Qualifications: Required (Basic) Qualifications: • High school diploma or General Equivalency Degree (GED) • Experienced/demonstrated proficiency of welding techniques, shop blueprint/drawing comprehension, and shop math skills. • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. • No relocation benefit is offered for this position. Only candidates residing within the immediate area (50 miles) will be considered for this position Position Criteria: A. Know and follow established job specific and facility wide health and safety procedures and rules. B. Bring health and safety issues, unsafe acts and safety suggestions to management's attention or correct those they can. C. Actively participate in accident, injury and illness prevention activities: D. Develop job safety analysis and safe working procedures. E. Identify and correct hazards and unsafe conditions. F. Accident, near-miss accident or potential hazard investigations. G. Keep other employees aware of health and safety practices and activities by actively observing fellow employee work practices and incorporating safety. H. Maintain 5S and housekeeping in work area. I. Maintain health and safety equipment in good working order. J. Actively participate in health and safety training and demonstrate competency based on training received. K. Participate actively in providing suggestions for the health and safety program improvement. L. Know and implement regulatory compliance requirements in their work area. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-###-#### to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform welding and fabrication tasks to maintain and repair equipment. Inspect and ensure weld quality meets safety and operational standards. Operate welding tools and machinery safely and efficiently. Collaborate with maintenance team to troubleshoot and resolve issues. Follow all safety protocols and maintain a clean work area. What Are We Looking For Ability to read and interpret blueprints and technical drawings. Strong knowledge of welding techniques and materials. Commitment to safety and attention to detail. Capability to work independently and as part of a team. Flexibility to work night shifts and adapt to changing priorities. Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA regulated ongoing drug and alcohol testing. Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer $27.04 to $32.45 per hour 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Seeking experienced welding candidates Industrial maintenance experience a plus K&W Welding, LLC offers competitive pay as well as insurance benefits Must be able to pass a background check and drug screening Must hold a valid driver's license * Full time, 40+ hours per week * Pay dependent upon experience NO phone calls. You must apply online.

Job Description As a result of our phenomenal growth, Carolina Pipe Fabrication, LLC has an opening for a Shop Welder. If you are an experienced professional who is looking to grow your career and contribute fresh and innovative ideas to serve our customers, this is an opportunity you should explore! A career at MSS is not just a job -- it's collaborating with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives. The success of MSS is a direct reflection of our team's dedication, passion, and hard work. Since 1996, MSS has taken pride in retaining some of the best talents in the industry by promoting a culture of respect, collaboration, and empowerment. Roles and Responsibilities Work with Shop Foreman and Superintendent to meet production schedule Provide the best quality and productive work without constant reminder Set up and review detailed drawings and materials for order Perform welding procedure according to order Fabricate and construct piping segments and attach fittings according to plans Use hand-welding or flame-cutting equipment to weld or join metals components, or to fill holes, indentations, or seams of fabricated metal products or pipe. Read a Weld Procedure Specification (WPS) to produce a weld according to the requirements of the procedure. Weld components in flat, vertical or overhead positions. Ignite torches or start power suppliers, and strike arcs by touching electrodes to metals being welded. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding and submerged arc welding. Recognize, set-up and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Examine work pieces for defects and measure work pieces to ensure conformance with specifications. Check to ensure that each job order is accurate and complete. Detect faulty operation of equipment or defective materials and notify supervisors. Communicate with superintendent and management Follows all safety policies and procedures. Performs other job-related duties as assigned. Other such duties and responsibilities as assigned by the Company from time to time. Qualifications and Requirements Minimum of 3 years' pipe welding (shop or field) to include all of the following procedures: MIG TIG Stick Must be able to pass an in-house welding test (6G criteria) Must have own hand tools Required Education: High School diploma and/or equivalent work experience. Must successfully pass a background check. 6G Certified or ability to pass test Regular and supervisory probation period required, if applicable. Random drug testing is required. Valid driver's license and clean driving record required. Must successfully pass a background check and drug test. Physical Demands: Occasional sitting, frequent stooping, crouching, kneeling, balancing, and climbing. Constant standing, walking, reaching and gripping. Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to talk and hear. Occasional lifting up to 50 lbs. (maximum solo lift) and constant lifting to 25 lbs., placing this position in the very heavy physical demand classification (PDC). Material Handling:? lifting from floor level to overhead, with occasional lifting up to 115 lbs. frequent lifting up to 50 lbs. and constant lifting up to 25 lbs., placing the position in the very heavy physical demand classification (PDC).Required Education: High School graduate or equivalent. Work Environment: Exposure to weather, extreme heat or cold, high noise intensity level, atmospheric conditions, exposure to electrical shock, exposure to toxic or caustic chemicals, wet and/or humid, vibration, proximity to moving mechanical parts, working high exposure places. Benefit Highlights At MSS, we value our employees by providing a supportive culture with competitive compensation and a benefits package that continues to evolve based on our business's growth and our employees' needs. Currently, our benefits include: Medical/Dental/Vision Insurance 401k with Employer Contributions PTO Paid Holidays Employee Assistance Program Long-term Disability Short-term Disability Flexible Spending Plan Health Savings Plan Additional Notes If you are unable to apply electronically and require an accommodation, please contact ************************ MSS Solutions, LLC is an equal opportunity employer and a drug-free environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. MSS Employees, please visit the MSS Career Center or contact HR to apply.

At ACI we build our company and our culture not by counting people, but by making our people count! $0.00 COST FOR MEDICAL, DENTAL, SHORT TERM DISABILITY & LIFE INSURANCE (EMPLOYEE ONLY) COVERAGE! Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: * Medical Insurance Plan ($0.00 Employee-Only) * Dental Insurance Plan ($0.00 Employee-Only) * Short-Term Disability Plan ($0.00 Employee-Only) * Life Insurance Plan ($0.00 Employee-Only) * Vision Insurance Plan * 401(K) Retirement Plan with Generous Company Matching * Health Savings Plan with Generous Company Matching * Wellness Programs Atlantic Constructors offers competitive benefits, for more information check out our comprehensive list on our website Acibuilds.com Summary/Objective: Lay out, fabricates, assemble, install and weld piping, piping systems, equipment and industrial systems. Essential Functions: * Recognizes properties of various welding rods and fluxes used in welding metals * Assembles, and installs a variety of metal pipe and pipe fittings (carbon steel and stainless steel) * Removes slag and rough spots with a portable grinder, file, or scraper * Determines required equipment and welding method, applying knowledge of metallurgy, geometry, and welding techniques * Performs other duties as assigned Supervisory Responsibility: No Required: * 3+ years of experience with TIG and Stick pipe welding with various techniques including electric, gas, arc, or other equipment; or equivalent combination of vocational training and experience * Must be able to pass required pipe welding test * Must be able to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail, and demonstrate problem-solving skills * Must adhere to all company policy and procedures * Must be available, and have the means to report to multiple job sites as assigned, to include working varying schedules The work environment and physical demands required would be representative of those that must be met by an employee to successfully perform the essential functions of this job, and may include, but are not limited to the following: Work Environment: * May work in varying temperatures; both inside and outside, including inclement weather, heat, humidity, cold, and dampness * May work in areas with exposure to moderate/high noise levels * May be exposed to fumes or airborne particles including dust * May be required to work in confined spaces or from high heights Physical Demands: * This role routinely uses construction equipment such as heavy machinery, hand and power tools * While performing duties of the job the employee may work aloft, climb, bend, pull, reach overhead, stand/walk for long periods of time and lift up to 50 lbs. * Frequently is required to use hands to finger, handle or feel objects, tools or controls; and reach with hands and arms * Must be able to correctly identify all colors of a color-coded cable/wires and see close vision, distance vision, depth perception, peripheral vision and ability to adjust focus Travel: * May require travel Preferred: * Prior military experience * HS diploma or GED equivalent Visit us at ***************** for more information! Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. An Equal Opportunity/Affirmative Action Employer * Pipe Welder

TIG Aluminum Welder, $18-$24/hr, 55-65 hours per week, MUST PASS 16-gauge WELD TEST $18/hour starting pay. After probationary period pay increases to $19/hour plus a performance/profit sharing bonus from $3-$8 an hour. Schedule Monday through Friday 5:30am to 5:30pm & Saturday 5:30am to 1pm Must be able to pass weld test with thin 16-gauge aluminum. Will be welding T joints on a bench Must have own gloves, hood, and necessary PPE. Ability to sit, climb, stoop, kneel, or crawl. Lift up to 60 lbs. throughout the shift. Well established company (over 60 years old) Full time permanent position (contract to hire), 401k, match, Medical, dental, vision, company participation, quarterly paid Profit sharing

Unless otherwise defined by applicable law, any employment relationship with STEVENS TOWING COMPANY, INC. is of an "at-will" nature, which means the employee may resign at any time and STEVENS TOWING COMPANY, INC. may discharge the employee at any time with or without cause. Stevens Towing Co., Inc., through Charleston County School District, has positions open for Student Welder Apprentices for the Spring 2020 semester for Baptist Hill High School and Johns Island High School students interested in a work-based learning opportunity. This opportunity offers high school credit and hourly compensation. The Spring apprenticeship term runs from January 2020 through May 2020. This training position requires one to partner and work with an experienced welder to gain skills in the following areas: different gases (argon, helium, argon/carbon dioxide, filler and base metals, metal tensile and yield strength, welding materials and alloys, applying these processes to manufacturing, repairing, modifying, rebuilding and assembling structures, pipe preparation and fitting, and plate welding. Required to participate in random drug screens as a condition of employment. Stevens Towing Company, Inc. is an Equal Employment Opportunity At-Will Employer. M/F/Disability/Veteran Requirements Must have good math skills to do well in any welding project, you have to be good in problem solving and know basic geometry. Required to learn safety rules and become familiar with proper usage of safety equipment. Required to comply with all Safety and Pollution Prevention Regulations and Procedures at all times under the direction of Stevens Towing Company, Inc.'s safety policies. In compliance with the ADA Amendments Act, should you have a disability that requires assistance and / or reasonable accommodation with the job application process, please contact Human Resources at Stevens Towing Co., Inc. Send to a Friend Apply

Job Description Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking a Pipe Welder/Fitter to work out of our Spring Hope, NC office. The Pipe Welder/Fitter will be responsible for: Fabricating and installing piping spools/ components of various types and sizes. Reading and understanding drawings. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Minimum of 5 years of experience in pipe welding/fitting. Successful completion of a welding and/or skills test. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

First Section Pool Title POOL-Welding Instructor - Corporate and Industry Training Pool Number F37-20 Announcement Summary This is a continuous recruitment pool not specifically advertised. The pool is continuous in order to develop a qualified pool of interested candidates. We invite applications to be submitted for potential openings. Fayetteville Technical Community College is seeking qualified applicants for this part-time position. Qualified candidates will possess excellent computer skills, demonstrate evidence of a career that includes flexibility and willingness to change; open-mindedness, fairness and the ability to see multiple perspectives; a willingness to take risks, and willingness to accept responsibility for professional and personal growth. Duties Teach face-to-face classes to include days, evenings, and weekends both on and off campus. Incorporate latest instructional technologies in course delivery and utilize interactive learning technologies to engage students in the teaching and learning process. Assist in program recruitment. Maintain class records. Minimum Qualifications Diploma in Welding Technology (or equivalent) with AWS Welding Certification, Certified Welding Instructor, or Certified Associate Welding Inspector. Must have experience in ARC Welding (SMAW, GMAW and GTAW) and Oxyacetylene Welding (OAW). Communication, both oral and written, and computer skills necessary. Must be willing to complete NCCER Certified Instructor Training (ICTP). Preferred Qualifications Teaching experience at the community college or four-year college. On-line teaching experience. Full or Part Time Part Time Special Instructions to Applicants NOTE: All applicants under consideration for employment at Fayetteville Technical Community College will be required to complete a consent form that allows FTCC to conduct a criminal background check on your behalf so that you may be considered further for the position for which you have applied. Announcement Details EEO Statement The Fayetteville Technical Community College is an Equal Opportunity Educational Institution/Employer. Close Date

Job Description Must be able to weld pipe diameters ranging from 1/2" to 36" in all positions. Will test in fixed 6G position. Must be able to operate a high frequency amperage control foot pedal while welding. Must be able to weld structural steel in all positions. Must be able to identify which type of filler wire to use for a given type of base metal Job Requirements All welds must pass ASME pressure vessel and piping codes Prep pipe fittings and pipe ends for full penetration welds on pipe assemblies. GTA weld on carbon steel, stainless steel and duplex stainless steel. Interpret drawings and welding symbols used to fabricate piping assemblies or skids. Calculate pipe fittings "take-outs" and piping measurements. Job Type: Full-time Pay: $25.00 +Per hour BASED OFF OF EXP” Competitive salary based on experience 4 day work week Varied insurance offerings with company match Professional development opportunities Positive and supportive work environment

SUMMARY Stick Pipe - Capable of certifying on single process pipe being proficient in SMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Job Description ITAC serves Process & Industrial clients with integrated engineering and construction services for complex capital projects. ITAC's purpose is to make life better. For our employees, this means providing them with the resources and flexibility they need to have both a rewarding career and a fulfilling family life. ITAC is 100% employee-owned, through our Employee Stock Ownership Plan (ESOP) and Direct Stock Ownership, every team member has the unique opportunity to be an owner who shares in the company's growth and earnings. We offer our team a comprehensive benefits package and numerous employee incentives. Rooted in love, we serve and care for our employees like family. We hire passionate and motivated people with an innovative mindset and the desire to grow. If the thought of challenging, fast-paced projects excites you, then you've come to the right place. At ITAC, you'll be part of a collaborative team that works hard to make life better. For more information, visit itac.us.com. Responsibilities Read blueprints and specifications to determine job requirements Weld and fabricate metal pipes and fittings according to project specifications Operate welding equipment and tools Ensure all welding equipment is properly maintained and in good working condition Observe safety precautions at all times Work in confined spaces and at heights above ground level Maintain a clean and organized work area Requirements Minimum of 5 years of experience as a Pipe Welder in a construction or similar setting Strong knowledge and experience in carbon steel and stainless steel pipe welding Proficient in reading and interpreting blueprints and specifications Experience with various welding techniques, including SMAW, GMAW, GTAW, and FCAW Ability to operate welding equipment and tools Excellent attention to detail and ability to produce high-quality welds Strong problem-solving and troubleshooting skills Ability to work in a fast-paced and deadline-driven environment Great communication and teamwork skills 6” Sch 40 Carbon Steel 6010/7018 (Must PASS Xray) 2-1/2” XXH Carbon Steel Tig/Stick (Must PASS Xray) 4” Sch10 Stainless Steel Tig (Must PASS Visual) All welded in 6G position Benefits From internships to seasoned professionals, our growing company provides career opportunities for all levels of experience. We offer our team a comprehensive benefits package and numerous employee incentives. For life's challenges, we also provide our employees and their immediate families with certified chaplains for around-the-clock encouragement and support. Rooted in love, we serve and care for our employees like family. ITAC provides benefits such as: Health, Vision, and Dental Insurance 401k & ESOP Life Insurance Short & Long-Term Disability Paid Time Off Paid Holidays Paid Parental Leave Bereavement Leave Employee Assistance Program Wellness Program Mentorship Program Safety Incentive Program 24/7 Chaplain Care

The Pipe / Tubing Welder must work safely and productively on various sized Industrial project sites. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Pipe / Tubing Welder position. All employees are expected to communicate, build relationships with other team members and use good judgment at all times. The Pipe / Tubing Welder is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned. ESSENTIAL DUTIES * Assist with development and implementation of pre-task safety plans * Determine appropriate welding equipment * Identify & correct safety hazards * Inspect welds for flaws * Operate angle grinder to prepare metal for welding * Perform welding of various metal components Working Conditions * Outdoors with various weather conditions - frequently * Loud noise - frequently * Lifting, carrying or moving up to 90 pounds * Wearing all PPE when on any project site (e.g., Steel toed boots, Hard hat, Safety glasses, gloves, earplugs, etc.) * Traveling/out of town - frequently * 40 to 55-hour work week - frequently * Heights and depths - frequently ID21 Education and/or Experience * High School Diploma or GED - preferred * Apprenticeship - preferred * Five years welding experience - required * Experience with rigging is helpful. Knowledge, Skills and Abilities Required * Basic level communication (Reading, writing & comprehending technical documents, safety regulations, responding to questions from managers / coworkers, checklists, etc.) * Safety awareness (Ability to recognize and correct safety hazards) * Detail Orientation (Ability to pay attention to details in order to follow instructions and execute work in accordance to specifications and safety / quality standards) * Basic level mathematics (Order of operations using fractions and decimals) * Basic level reasoning (Ability to comprehend and carry out verbal or written instructions while understanding how to problem solve and complete task(s) when dealing with one variable) DESIRED * Intermediate level mathematics (2D / 3D geometry, percentages, ratios, basic trigonometry) * Entry level planning / organizing (Ability to plan a daily work schedule and communicate the daily objectives to coworkers while organizing tasks by priority to meet deadlines) Certificates, Licenses, Registrations * Valid driver's license - required * OSHA-10 Hour Certification - required; training provided by Wayne Brothers * Certified Welder * High School Diploma / GED Physical Demands * Lifting and carrying up to 50 pounds * Frequent lifting, bending, kneeling, and reaching * Reaching above shoulder * Standing for long periods of time * Handling and installing welded materials * Considerable use of your arms and legs and moving the whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials. Wayne Brothers, Inc. is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy.