Welder jobs in Tyler, TX

Welder The Welder is responsible for general welding and fabrication of the operation fleet, equipment, and building maintenance. Including repairs, improvements and new equipment fabrication. Adhere to all shop policies and procedures within quality management system. Perform general welding repairs, improvements and fabrication on oilfield service equipment. Visually inspect equipment for proper performance and detect faults and deficiencies. Understands blueprints and performs tasks as described. Drive company equipment as needed including forklift and telehandler. Performs DWS prequalified welds in GMAW/FCAW/SMAW. Operate shop equipment safely and efficiently to shop procedures. Work with Quality Manager to execute requirements of nonconformance procedure. Perform large repair projects with minimal supervision. Coordinate with field staff on necessary equipment repairs. Other project as assigned by management. Position Details FLSA Status: Non-Exempt Job Status: Full-time Amount of Travel Required: 25% Work Schedule: Maintains a flexible work schedule to meet the demands of industry hours may be long and irregular and include evenings and weekends or on call duties. Position Qualifications Accountability & Dependability Take personal responsibility for the quality and timeliness of work and achieves results with little oversight. Adaptability & Flexibility Adapts to changing business needs, conditions and work responsibilities. Detail Oriented Ability to pay attention to the minute details of a project or task. Ethical Ability to demonstrate conduct conforming to a set of values and accepted standards. Problem Solving Ability to find a solution for or to deal proactively with work-related problems. Initiative Ability to make decisions or take actions to solve a problem or reach a goal. Communication Ability to communicate effectively, both oral and written, clearly and concisely. Teamwork Promotes cooperation and commitment within a team to achieve goals and deliverables. Working Under Pressure Ability to complete assigned tasks under stressful situations. Skills & Abilities Education: High School Diploma, GED or equivalent Experience: Minimum of some verifiable welding and fabrication experience to a maximum of 3+ years verifiable welding and fabricating experience. Experience with TIG/MIG welding and stainless or aluminum experience preferred. Roles may range from entry level to experienced based on prior work history and skillset. Other Requirements: Must have a valid drivers license, meet minimum driving requirements for company insurance purposes and successfully pass a pre-employment background check, drug screen, and physical. Disclaimer The Company has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. EOE Statement Deep Well Services is an Equal Opportunity Employer. Deep Well Services does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other status protected under federal, state, or local law. All employment is decided on the basis of qualifications, merit, and business need.

YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: * Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment * Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys * Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys * Must be able to pass aluminum welding certification tests * Performs related tasks such as thermal cutting and grinding * Repairs broken or cracked parts, fills holes, and increases size of metal parts * Locates and repairs cracks in products and equipment * Maintains clean work area * Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears * Determines layouts and welds parts and assemblies according to engineering drawings and specifications * May monitor and verify quality in accordance with statistical process or other control procedures * Trains less experienced employees to build quality products within the time standard * Participates in continuous improvement meetings, and shares knowledge for improvement actions * Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation * Interacts with employees and managers across the company * May need to operate a vehicle or forklift * Work done with minimal supervision * Work may be done without established procedures * Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: * Must know shop mathematics through geometry * Ability to read and interpret complex prints * Good eye/hand coordination * Basic computer skills * Must have the ability to follow written and verbal instructions * Must have the ability to follow safety practices * Basic problem-solving skills * Ability to learn how to use necessary computer tools * Visual attention to detail * Reliable hand strength and manual dexterity * Three (3) years directly related work experience or two (2) years of concentrated welding training. * High school Diploma or GED required, AA in welding. * Able to lift to a maximum of 25-40 lbs. * Able to sit/stand for long periods of time. * Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Temp Now Hiring: Solid Wire & Flux Core Welders Pay: $18-$21 per hour (based on experience) Schedule: Full-time Requirements: Must have experience with solid wire and flux core welding Ability to read and follow blueprints or welding instructions Strong attention to detail and commitment to quality

Stream-Flo is one of the largest privately held companies providing wellheads, gate valves, check valves, and surface safety systems for the worldwide oil and gas industry. Stream-Flo offers employees a competitive salary, profit sharing, and a comprehensive benefits program, as well as the opportunity to work in an entrepreneurial environment characterized by continued career growth and strong business results. Key position functions include: Execute pressure-containing welds in compliance with ASME Section IX and API 6A requirements. Accurately interpret and follow blueprints, welding symbols, and technical drawings. Maintain adequate stock and proper organization of welding consumables, including rods, wire, and gas. Conduct pre-weld preparation and post-weld cleanup of materials and work area. Perform visual inspections of welds and assist with NDE (non-destructive examination) preparation. Ensure work is completed to specified tolerances and meets internal and regulatory quality standards. Assist with the setup of jigs, fixtures, and tooling for fabrication jobs as required. Execute high-quality welds on pressure-containing components in compliance with ASME Section IX and API 6A standards. Read and follow engineering drawings, welding symbols, and job travelers to ensure accurate fabrication and weld execution. Use welding and fitting skills to assemble wellhead and choke equipment parts per manufacturing specifications. Monitor and manage inventory of welding consumables (e.g., wire, rod, gas) and request re-supply as needed to prevent downtime. Keep the welding area clean, organized, and free of hazards. Follow all company safety procedures and wear the required PPE. Perform visual weld inspections and prepare parts for NDE (Non-Destructive Examination) per quality procedures. Perform basic maintenance on welding equipment and promptly report issues or failures to maintenance personnel. Accurately complete job documentation, weld logs, and time tracking per production and quality requirements. Work closely with production leads, machinists, and quality inspectors to complete jobs on time and to specifications. Operate multiple welding processes including: Gas Metal Arc Welding (GMAW), Flux Cored Arc Welding (FCAW), Gas Tungsten Arc Welding (GTAW), Shielded Metal Arc Welding (SMAW) Preferred candidates will possess a combination of the following: Prior certification in ASME or AWS welding processes (e.g., 6G, pipe welding) is required. Experience in wellhead equipment or oilfield service product manufacturing is desired. Proven experience with GMAW, GTAW, SMAW, and pressure-containing welds in a manufacturing or repair environment. Experience working with ASME and API welding codes and procedures (WPS, PQR, WQTR). Proficiency in fabrication techniques, including cutting, fitting, and tack welding of components. Ability to read and interpret engineering drawings, blueprints, and welding symbols. Strong attention to detail, craftsmanship, and commitment to quality and safety. Forklift or overhead crane experience is a plus. Must be able to lift up to 50 lbs. and stand, bend, or stoop for extended periods. Work is performed in a shop/manufacturing environment, exposed to noise, heat, fumes, and sharp materials. Personal protective equipment (PPE) must always be used. We thank all applicants for their interest. However, only those candidates identified for further consideration will be contacted. Internal Candidates - please apply by logging in to UltiPro. External Candidates - please apply with the Apply Now button.

Wastequip has an immediate opportunity for a Fabricator to support our Tyler, TX manufacturing operation. This is a full time position with great benefits including but not limited to Health Insurance, 401K Plan, Paid Vacation/Sick time, and so much more. The ideal candidate will have the skills and experience necessary to fabricate steel parts and tools using a variety of machines. 2nd shift: Monday to Thursday: 4:00PM to 1:30AM. Friday: 2:30PM to 11:00PM. Pay rate: $18.14. RESPONSIBILITIES Fabricate steel and other metal parts as indicated by the work order and blueprints Operating a Press Brake and/or Shear Turns handwheels to adjust rake (angle) and pressure of blade Positions and clamps stop and side guides to set length and angle of cut Lifts workpiece manually or by hoist or crane to machine bed or roller table and positions it against side guide and end stops Starts machine, which clamps workpiece and lowers blade to cut metal Lays out cutting lines on metal when shearing single pieces Tilts bed, blade, or installs fixtures to shear, bevel, or trim fabricated items Operates portable shear to cut sheet metal Inspects work to verify dimensions QUALIFICATIONS Prior experience operating a Press Brake and/or Shear. Set up experience a plus Understanding of basic CNC controls 1+ years prior production experience preferred Ability to read blueprints and measuring tape Basic math and problem-solving skills (add, subtract, multiply, and divide in all units of measure) Experienced in a fast-paced production environment Able to pass all EHS required tests and clearances Company Benefits: • 2 Medical Plan Options - Base HSA (High Deductible) and Buy-Up Medical Plans • Prescription (Rx) Insurance • Health Savings Account (HSA) • 2 Dental Plan Options - Base Dental and Buy-Up Dental Plans • Vision Insurance • Flexible Spending Accounts (FSA's) • Health Care FSA • Dependent Care FSA • Company Paid Base Life Insurance • Company Paid Accident, Death & Dismemberment Insurance • Company Paid Business Travel Accident Insurance • Company Paid Disability Insurance ▪ Short-Term Disability (STD) and Base Long-Term Disability (LTD) Insurance • Employee Assistance Program (EAP) • Voluntary Hospital, Accident & Critical Illness (Cancer) Insurance • 401(K) Retirement Plan with 50% Company Match • Voluntary Pet Insurance • Vacation and Personal/Sick Time • Paid Grandparent Leave • Paid Bonding Leave • Adoption Assistance • Education Assistance (Tuition Reimbursement) About Wastequip Wastequip got its start in 1989 with containers and compactors. But, today, we have evolved into so much more than just a manufacturer of high-quality steel containers and compactors. We are the waste industry's only All-in-One solutions provider - from carts and containers to collect waste to hoists and trash trucks to move the waste to parts, service and technology to keep your operation running smoothly. While we're proud to be North America's leading manufacturer of waste handling equipment, we are equally proud to be a driving force for enhanced sustainability across the waste industry. We are consistently striving to improve our own operations while making it easier for our customers to do the right thing - building a brighter future for all.

Welder Fabricator Location : Adkins, TX 78101 Job Type : Full-Time - On-Site (W-2 Hourly) Schedule : Monday to Friday, 8:00 AM - 4:45 PM (45-minute lunch) Pay : Starting at $23.00 per hour (based on experience) About Top Metal Solutions Top Metal Solutions LLC specializes in high-quality metal fabrication, including racks, structural components, CNC cutting, welding, and coating services. Based in Adkins, Texas, we are growing rapidly and take pride in building a strong team to support our manufacturing operations. Position Summary We are seeking a Welder Fabricator to assemble and fit complex metal structures using advanced blueprints. This position requires strong technical skills, precision, and leadership in the production area. Ideal for experienced professionals who want to grow into supervisory roles. Key Responsibilities • Assemble and fit structural metal components according to advanced blueprints and specifications. • Perform layout, measuring, marking, and preparation of materials before welding. • Tack-weld and perform MIG welding as needed during assembly. • Cut and adjust materials using manual plasma cutters, torches, and other shop equipment. • Use measuring instruments (tape, square, level, templates) to ensure accuracy and quality. • Train, guide, or assist less experienced welders or helpers in fitting tasks. • Maintain a clean and organized work area and comply with OSHA safety standards. Required Qualifications • Authorization to work in the United States (valid work permit or status required). • Bilingual English/Spanish required. • Proven experience in fitting/assembling complex metal structures. • Ability to read and interpret advanced blueprints and welding symbols. • Skilled in using plasma/torch cutting tools and MIG welding equipment. • Preferred certifications: OSHA safety training, AWS welding standards. • Physical ability to lift up to 70 lbs, stand for extended periods, and work in environments with heat, dust, or noise. • Commitment to safety, quality, and precision. Physical Requirements • Regular lifting, bending, and moving heavy materials. • Standing and working on assembly tasks throughout the shift. • Consistent use of PPE as required by OSHA standards. Compensation & Benefits • Starting pay: $23.00 per hour (W-2 employment). • Benefits available after 90 days of continuous employment: Employer-sponsored medical insurance (70/50 plan). 401(k) retirement plan with 3% employer match. • Stable, full-time employment with opportunities for growth into Team Leader or Production Supervisor roles. Why Join Us This is your opportunity to apply your technical expertise in a growing company where safety, quality, and teamwork are priorities. We offer competitive pay, consistent hours, and a clear path to leadership positions.

We are looking for a skilled Flux Core Welder to join our production team. The ideal candidate will be responsible for welding and fabricating metal components using flux core arc welding (FCAW) processes. This role requires precision, safety awareness, and the ability to read and interpret blueprints and technical drawings. Key Responsibilities: Perform flux core (FCAW) welding on structural and fabricated steel components. Set up welding machines and adjust settings according to job specifications. Read and interpret blueprints, drawings, and welding symbols. Inspect completed welds to ensure quality, accuracy, and compliance with company and industry standards. Maintain a clean, organized, and safe work area. Perform basic maintenance and troubleshooting on welding equipment. Follow all safety procedures, including wearing proper PPE. Collaborate with team members and supervisors to meet production goals. Qualifications: 2+ years of flux core welding experience in an industrial, structural, or manufacturing environment. Proficient in reading and interpreting blueprints and weld symbols. Ability to pass a welding test (FCAW). Strong attention to detail and quality. Familiarity with fabrication tools, grinders, and measuring devices. Certification in FCAW or AWS Physical Requirements: Ability to lift up to 50 lbs. Comfortable standing, bending, and working in various positions for extended periods. Capable of working in hot, noisy, or confined spaces as required by the job.

Wastequip has an immediate opportunity for a Fabricator to support our Tyler, TX manufacturing operation. This is a full time position with great benefits including but not limited to Health Insurance, 401K Plan, Paid Vacation/Sick time, and so much more. The ideal candidate will have the skills and experience necessary to fabricate steel parts and tools using a variety of machines. 2nd shift: Monday to Thursday: 4:00PM to 1:30AM. Friday: 2:30PM to 11:00PM. Pay rate: $18.14. RESPONSIBILITIES * Fabricate steel and other metal parts as indicated by the work order and blueprints * Operating a Press Brake and/or Shear * Turns handwheels to adjust rake (angle) and pressure of blade * Positions and clamps stop and side guides to set length and angle of cut * Lifts workpiece manually or by hoist or crane to machine bed or roller table and positions it against side guide and end stops * Starts machine, which clamps workpiece and lowers blade to cut metal * Lays out cutting lines on metal when shearing single pieces * Tilts bed, blade, or installs fixtures to shear, bevel, or trim fabricated items * Operates portable shear to cut sheet metal * Inspects work to verify dimensions QUALIFICATIONS * Prior experience operating a Press Brake and/or Shear. Set up experience a plus * Understanding of basic CNC controls * 1+ years prior production experience preferred * Ability to read blueprints and measuring tape * Basic math and problem-solving skills (add, subtract, multiply, and divide in all units of measure) * Experienced in a fast-paced production environment * Able to pass all EHS required tests and clearances Company Benefits: * 2 Medical Plan Options - Base HSA (High Deductible) and Buy-Up Medical Plans * Prescription (Rx) Insurance * Health Savings Account (HSA) * 2 Dental Plan Options - Base Dental and Buy-Up Dental Plans * Vision Insurance * Flexible Spending Accounts (FSA's) * Health Care FSA * Dependent Care FSA * Company Paid Base Life Insurance * Company Paid Accident, Death & Dismemberment Insurance * Company Paid Business Travel Accident Insurance * Company Paid Disability Insurance Short-Term Disability (STD) and Base Long-Term Disability (LTD) Insurance * Employee Assistance Program (EAP) * Voluntary Hospital, Accident & Critical Illness (Cancer) Insurance * 401(K) Retirement Plan with 50% Company Match * Voluntary Pet Insurance * Vacation and Personal/Sick Time * Paid Grandparent Leave * Paid Bonding Leave * Adoption Assistance * Education Assistance (Tuition Reimbursement) About Wastequip Wastequip got its start in 1989 with containers and compactors. But, today, we have evolved into so much more than just a manufacturer of high-quality steel containers and compactors. We are the waste industry's only All-in-One solutions provider - from carts and containers to collect waste to hoists and trash trucks to move the waste to parts, service and technology to keep your operation running smoothly. While we're proud to be North America's leading manufacturer of waste handling equipment, we are equally proud to be a driving force for enhanced sustainability across the waste industry. We are consistently striving to improve our own operations while making it easier for our customers to do the right thing - building a brighter future for all.

Work Schedule: Monday - Friday, 6:00 AM - 6:00 PM, 4x12 schedule, additional overtime as needed Under general supervision, applies appropriate welds to fabricate or repair materials. II. Essential Duties and Responsibilities Perform all duties in accordance with WM Safety and Life Critical Rules and OSHA. (Occupational and Safety Health Act) requirements Fuses metal objects by means of gas or electric welding procedures. Fabricates, and welds oil vessels, stands, and other objects. Performs minor repairs and applies basic welding processes. Repairs compactors, containers and carts. Performs preventive maintenance inspections, diagnostic and repair of electrical and hydraulic systems on compactors. Qualified in the welding processes such as arc welding, gas welding, aluminum welding, brazing, and soft soldering on a variety of materials. Conducts safety checks on compactors and containers. Completes required paperwork and work order tasks utilizing maintenance software program associated with repairing compactors and containers, documenting parts usage, and accounting for repair times. Assists senior welders in the completion of project work. Performs service calls on customer drilling rig, surface facilities and tools, and compactor repair. Performs related work such as flame cutting, bending, forming, beveling, notching of metal and plastic parts. Performs all work within Standard Repair Times (SRTs). Works from prints, drawings and verbal instructions. Performs standard layouts and set-ups of dimensions and tolerances. Utilizes standard hand tools, measuring devices, cranes, lifts, jacks and other required equipment. Performs other maintenance related work as required. Maintains a clean, safe work area in compliance with Corporate / OSHA Standards. Performs all work in accordance with established safety procedures. III. Qualifications A. Required Qualifications 2 years previous experience in Stick, Mig. Brazing, Gas welding, and Soft Soldering on a variety of metals and alloys Valid driver's license. B. Preferred Qualifications IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job.☒ Field: This job operates in both inside gas plant conditions as well as in outside conditions that include inclement weather, heat and humidity. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.

At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. **Job Description** **Job Requirements** We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Salary is based upon experience. Base Salary:

Job Summary: The Shop Welder Tech , performs complicated welding repairs, fabrication, and line boring on heavy equipment, and components with minimal supervision utilizing Holt, Caterpillar and AWS Welding Procedures, Standards and Codes. Demonstrating ability to fabricate solely from blueprints and perform the removal and installation of most components on heavy equipment, including undercarriage. The hours for the position are Monday through Friday 7:00 AM to 4:00 PM. We are located at 3007 Maverick Drive, Kilgore, Texas 75662. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: Models, promotes, and reinforces the consistent use of HOLT's Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission. Executes complicated repairs, fabrication and welding on heavy equipment and components in a shop environment. Conducts complicated carbon arc gouging, oxy/acetylene torch beveling and welding with different welding processes. Completes most line boring jobs with minimal supervision. Accurately orders parts utilizing Holt computer systems by looking up special instructions, specifications and processes utilizing SIS and other resources. Maintains all company equipment, tools, and work areas in good, clean working order. Proficiently operates hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding. Accurately prepares technical inspection and service reports, documents, and any other necessary paperwork in a timely manner. Works outside of regularly scheduled hours as required by workload. Performs removal and installation of components on heavy equipment, including undercarriage. Recommends innovative ways of approaching projects and equipment needed to perform tasks. Assists with developing procedures and techniques for performing complicated fabrications or repairs. Consults with supervisor on purchases. Builds and sustains relationships with outside organizations, vendors, internal and external customers. Aids in coaching and mentoring less experienced welders. Works safely at all times while consistently adhering to company policies, procedures and standards internally as well as externally when representing our organization. Performs other duties assigned. Knowledge, Skills, and Abilities: Ability to complete most complicated welding repairs on steel and steel alloys utilizing FCAW & SMAW process (all position) and perform advanced torch work, cutting and gouging. Proficient knowledge of equipment and dimensional tools, including their designs, uses, repair and maintenance. Proficient knowledge of specification and drawing interpretations. Proficient knowledge with current computer software, related hardware, and machine interface systems. Adequate work habits, accuracy and exceptional attention to detail and quality of work. Developed technical skills as a qualified welder/fabricator with a demonstrated ability to effectively perform assigned welding tasks. Solid verbal and written communication skills. Developing influencing skills and problem-solving skills with a developing mechanical aptitude. Adaptable to changing schedules and exhibits time management skills. Ability to follow logical troubleshooting and standard operating procedures when performing welding fabrication and repairs. Ability to work independently and as part of a team with a strong work ethic, being dependable, reliable, and honest with demonstrated integrity. Ability to follow manufacturer and company installation and service guidelines to ensure quality work. Required to be a self-starter. Ability to read, write, and understand information with the ability to follow directions and procedures. Able to perform complicated line-boring jobs. Able to cut-out/weld-out broken bolts. Ability to work with, hand grinder/sander, air tools, forklifts, and material handling equipment. Additional Requirements: Welding certifications to complete during this level is SMAW (stick) 1" T-1 Material (3G and 4G) welding processes Failure Analysis Training Ongoing Safety Training Principles of Persuasion Selling Skills MSHA Certification Education and Experience: High school diploma or equivalent required; with additional specialized/technical training or some college courses (Welding Technology) preferred Three years' experience required Preferred license: Flux Cored Arc Welding (FCAW) 3G and 4G Shielded Metal Arc Welding (SMAW) 3G and 4G Gas Tungsten Arc Welding (GTAW) 3G and 4G First Aid/CPR; Confined Space Entry; Methane/O2 Deficiency Supervisory Responsibilities: None Travel: Up to 5% travel may be required for training or work related. Physical Requirements: Ability to function and work around welding machines, overhead cranes, cutting torches and gauges, fit up and layout tools. Ability to move objects and use abdominal and lower back muscles to provide support over time without fatigue. Frequently moves materials weighing up to 50 lb., anything more requires a team lift, or a mechanical lift. Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina. Ascends/descends with gradual or continuous progress by oneself using hands/feet while maintaining at least three points of contact to climb up/down ladders and/or equipment. Be able to maneuver safely and work underneath equipment. Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work. Significant amount of time standing and walking; at times kneeling, crouching, stooping, climbing, and reaching Work Environment: Requires the use of common protective or safety equipment. Regularly works outdoors around moving mechanical parts and noise level may be loud at times. May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and moisture/humidity. Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment Occasionally performs work in cramped spaces and/or high places. Frequently interact with internal/external customers and occasionally interacts with vendors and outside organizations. Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT LI-JH1 #HOLTCAT #CAT #CATERPILLAR #Heavyequipment #Lineboring

Job Description Job Summary: This position is responsible for performing basic manufacturing weld fabrications of various products or components. The MFG Welder 1's primary purpose is to learn, develop, and gain experience as a Welder and receive on-the-job training (OJT) including: understanding drawings and blueprints, and adhere to standard procedures in the use of equipment when setting up parts, tack welding, stitch welding, and seal welding. Hours for this position are Monday through Friday - 6:00am - 4:30pm. Entry-level position - Generally has less than two years of experience and/or demonstrated job relevant knowledge/skills. Relies on instructions and pre-established guidelines to perform the functions of the job; works under immediate supervision. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: Models, promotes, reinforces, and rewards the consistent use of HOLT's Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission Adheres to guidelines and procedures in setting up, tack/stitch weld subassemblies, and full product utilizing various tools and fixtures Learns and performs how to interpret blueprints, drawings, and all welding processes through weld symbols and call outs Learns and performs how to complete work orders, fabrication, and welding on product and their components Learns and performs basic oxy/acetylene torch cutting and welding of multiple different welding processes Performs in accordance to Standard Operating Procedures (SOP) with job tasks and maintains consistency between work shifts and work areas Transports material in area or between areas utilizing overhead crane, jibs, carts, magnets and other devices Works as a member of the manufacturing team to provide high quality products that satisfy the customer (internal and external) and achieves departmental goals Maintains the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean, and orderly condition Operator Performed Maintenance (OPM and 5S) The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects Adheres to contamination control and HAZMAT rules and regulations Communicates with team on established standard work variances on production line processes Preforms quality inspections, complete reports, documents, and/or any other necessary paperwork, and enforces required rework prior to customer Works overtime as required by workload and customers' needs Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards Requires regular and punctual employee attendance Performs other duties as assigned Knowledge, Skills, and Abilities: Basic knowledge of weld equipment and dimensional tools, including their uses and maintenance Basic knowledge of specification and drawing interpretations; e.g. drawings, blueprints and computers and the use of equipment needed to fabricate and perform in the task at hand Basic knowledge with current computer software, related hardware, and machine electronic systems Developing good work habits, accuracy and exceptional attention to detail and quality of work and awareness Ability to develop technical skills to become a skilled qualified welder and fabricator to effectively perform assigned welding tasks Ability to read, write, and understand information Adaptable to changing schedules and exhibits time management skills Ability to follow logical troubleshooting and standard operating procedures when performing welding fabrication Ability to develop thinking and problem-solving skills to learn and understand Root Cause Corrective Action (RCCA) process Required to work as part of a team with a strong work ethic being dependable, reliable and honest with demonstrated integrity Required to operate hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding Required to be a self-starter and self-motivated with an exceptional safety record Must complete Value Based Leadership training to include: o Values Based Leadership o Winning Together with DiSC Education and Experience: High school diploma or equivalent preferred Two years of work-related skill, knowledge, or experience preferred Basic Welding Certifications in the GMAW welding process in the 1-3 G/F positions preferred Supervisory Responsibilities: None Travel: Valid Driver's license required Physical Requirements: Significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment Routinely reacts to visual, auditory and other signals, including alarms and instructions, and is required to visually inspect work Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue Be able to maneuver safely and work underneath blocked and cribbed product Frequently lifts and moves materials and equipment weighing up to 50 lbs. Work Environment: Requires wearing proper protective and safety equipment (PPE) Regularly works indoors around moving equipment and exposed to flashes of light from welding, and loud noise levels; may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity Exposure to small quantities of chemicals, dust, steam, high-pressure water and high-speed rotating equipment Possible exposure to minor burns and cuts - must be reported for proper treatment Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-MFG

YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Must be able to pass aluminum welding certification tests Performs related tasks such as thermal cutting and grinding Repairs broken or cracked parts, fills holes, and increases size of metal parts Locates and repairs cracks in products and equipment Maintains clean work area Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears Determines layouts and welds parts and assemblies according to engineering drawings and specifications May monitor and verify quality in accordance with statistical process or other control procedures Trains less experienced employees to build quality products within the time standard Participates in continuous improvement meetings, and shares knowledge for improvement actions Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation Interacts with employees and managers across the company May need to operate a vehicle or forklift Work done with minimal supervision Work may be done without established procedures Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Must know shop mathematics through geometry Ability to read and interpret complex prints Good eye/hand coordination Basic computer skills Must have the ability to follow written and verbal instructions Must have the ability to follow safety practices Basic problem-solving skills Ability to learn how to use necessary computer tools Visual attention to detail Reliable hand strength and manual dexterity Three (3) years directly related work experience or two (2) years of concentrated welding training. High school Diploma or GED required, AA in welding. Able to lift to a maximum of 25-40 lbs. Able to sit/stand for long periods of time. Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Job DescriptionSpecialized Worker - MIG & Flux-Cored Welder Location : Adkins, TXPay : $20.00 per hour Type : Full-Time - W-2 About the RoleTop Metal Solutions LLC is looking for experienced MIG and Flux-Cored Welders to join our growing fabrication team in Adkins, TX. This is a hands-on position for skilled welders who take pride in their craft, work safely, and thrive in a fast-paced production environment. We're building a team of professionals who want stable employment, competitive pay, and opportunities for long-term growth. Key Responsibilities• Perform high-quality MIG and Flux-Cored welding in flat and vertical positions.• Work with materials ranging from 11 gauge up to 1" thick.• Read and interpret welding symbols and basic blueprints.• Identify and correct common weld defects such as porosity or lack of fusion.• Set up, adjust, and operate welding machines (Millermatic 211, 252, 255).• Follow OSHA-based safety standards and maintain a clean, organized workspace. Required Qualifications• Authorization to work in the United States (valid work permit or status required).• Proven experience in metal fabrication or welding shop environments.• Ability to read and understand basic fabrication drawings.• Proficiency with MIG and Flux-Cored welding machines and related equipment.• Valid SSN or ITIN with valid work authorization, government-issued ID, and a U.S. bank account.• Ability to work effectively in a primarily Spanish-speaking environment.• Willingness to obtain AWS D1.1 and/or D1.3 certifications in the future (company-supported at later stages). Physical Requirements• Lift up to 70 lbs without assistance.• Stand and weld for extended periods.• Work in environments with heat, dust, or noise.• Consistent use of PPE as required by OSHA standards. Compensation & Benefits• Competitive Pay: $20.00 per hour (W-2 employment).• Benefits available after 90 days of continuous employment: Employer-sponsored medical insurance (70/50 plan). 401(k) plan with 3% employer match. OSHA-based training and future AWS certifications supported by the company.• Stable, full-time employment with opportunities for growth (including advanced blueprint reading and higher-responsibility roles). Job Posted by ApplicantPro

Job Summary: The Shop Welder Tech , performs complicated welding repairs, fabrication, and line boring on heavy equipment, and components with minimal supervision utilizing Holt, Caterpillar and AWS Welding Procedures, Standards and Codes. Demonstrating ability to fabricate solely from blueprints and perform the removal and installation of most components on heavy equipment, including undercarriage. The hours for the position are Monday through Friday 7:00 AM to 4:00 PM. We are located at 3007 Maverick Drive, Kilgore, Texas 75662. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: Models, promotes, and reinforces the consistent use of HOLT's Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission. Executes complicated repairs, fabrication and welding on heavy equipment and components in a shop environment. Conducts complicated carbon arc gouging, oxy/acetylene torch beveling and welding with different welding processes. Completes most line boring jobs with minimal supervision. Accurately orders parts utilizing Holt computer systems by looking up special instructions, specifications and processes utilizing SIS and other resources. Maintains all company equipment, tools, and work areas in good, clean working order. Proficiently operates hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding. Accurately prepares technical inspection and service reports, documents, and any other necessary paperwork in a timely manner. Works outside of regularly scheduled hours as required by workload. Performs removal and installation of components on heavy equipment, including undercarriage. Recommends innovative ways of approaching projects and equipment needed to perform tasks. Assists with developing procedures and techniques for performing complicated fabrications or repairs. Consults with supervisor on purchases. Builds and sustains relationships with outside organizations, vendors, internal and external customers. Aids in coaching and mentoring less experienced welders. Works safely at all times while consistently adhering to company policies, procedures and standards internally as well as externally when representing our organization. Performs other duties assigned. Knowledge, Skills, and Abilities: Ability to complete most complicated welding repairs on steel and steel alloys utilizing FCAW & SMAW process (all position) and perform advanced torch work, cutting and gouging. Proficient knowledge of equipment and dimensional tools, including their designs, uses, repair and maintenance. Proficient knowledge of specification and drawing interpretations. Proficient knowledge with current computer software, related hardware, and machine interface systems. Adequate work habits, accuracy and exceptional attention to detail and quality of work. Developed technical skills as a qualified welder/fabricator with a demonstrated ability to effectively perform assigned welding tasks. Solid verbal and written communication skills. Developing influencing skills and problem-solving skills with a developing mechanical aptitude. Adaptable to changing schedules and exhibits time management skills. Ability to follow logical troubleshooting and standard operating procedures when performing welding fabrication and repairs. Ability to work independently and as part of a team with a strong work ethic, being dependable, reliable, and honest with demonstrated integrity. Ability to follow manufacturer and company installation and service guidelines to ensure quality work. Required to be a self-starter. Ability to read, write, and understand information with the ability to follow directions and procedures. Able to perform complicated line-boring jobs. Able to cut-out/weld-out broken bolts. Ability to work with, hand grinder/sander, air tools, forklifts, and material handling equipment. Additional Requirements: Welding certifications to complete during this level is SMAW (stick) 1" T-1 Material (3G and 4G) welding processes Failure Analysis Training Ongoing Safety Training Principles of Persuasion Selling Skills MSHA Certification Education and Experience: High school diploma or equivalent required; with additional specialized/technical training or some college courses (Welding Technology) preferred Three years' experience required Preferred license: Flux Cored Arc Welding (FCAW) 3G and 4G Shielded Metal Arc Welding (SMAW) 3G and 4G Gas Tungsten Arc Welding (GTAW) 3G and 4G First Aid/CPR; Confined Space Entry; Methane/O2 Deficiency Supervisory Responsibilities: None Travel: Up to 5% travel may be required for training or work related. Physical Requirements: Ability to function and work around welding machines, overhead cranes, cutting torches and gauges, fit up and layout tools. Ability to move objects and use abdominal and lower back muscles to provide support over time without fatigue. Frequently moves materials weighing up to 50 lb., anything more requires a team lift, or a mechanical lift. Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina. Ascends/descends with gradual or continuous progress by oneself using hands/feet while maintaining at least three points of contact to climb up/down ladders and/or equipment. Be able to maneuver safely and work underneath equipment. Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work. Significant amount of time standing and walking; at times kneeling, crouching, stooping, climbing, and reaching Work Environment: Requires the use of common protective or safety equipment. Regularly works outdoors around moving mechanical parts and noise level may be loud at times. May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and moisture/humidity. Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment Occasionally performs work in cramped spaces and/or high places. Frequently interact with internal/external customers and occasionally interacts with vendors and outside organizations. Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT LI-JH1 #HOLTCAT #CAT #CATERPILLAR #Heavyequipment #Lineboring

Job Description Job Summary: The Shop Welder Tech , performs complicated welding repairs, fabrication, and line boring on heavy equipment, and components with minimal supervision utilizing Holt, Caterpillar and AWS Welding Procedures, Standards and Codes. Demonstrating ability to fabricate solely from blueprints and perform the removal and installation of most components on heavy equipment, including undercarriage. The hours for the position are Monday through Friday 7:00 AM to 4:00 PM. We are located at 3007 Maverick Drive, Kilgore, Texas 75662. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: Models, promotes, and reinforces the consistent use of HOLT's Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission. Executes complicated repairs, fabrication and welding on heavy equipment and components in a shop environment. Conducts complicated carbon arc gouging, oxy/acetylene torch beveling and welding with different welding processes. Completes most line boring jobs with minimal supervision. Accurately orders parts utilizing Holt computer systems by looking up special instructions, specifications and processes utilizing SIS and other resources. Maintains all company equipment, tools, and work areas in good, clean working order. Proficiently operates hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding. Accurately prepares technical inspection and service reports, documents, and any other necessary paperwork in a timely manner. Works outside of regularly scheduled hours as required by workload. Performs removal and installation of components on heavy equipment, including undercarriage. Recommends innovative ways of approaching projects and equipment needed to perform tasks. Assists with developing procedures and techniques for performing complicated fabrications or repairs. Consults with supervisor on purchases. Builds and sustains relationships with outside organizations, vendors, internal and external customers. Aids in coaching and mentoring less experienced welders. Works safely at all times while consistently adhering to company policies, procedures and standards internally as well as externally when representing our organization. Performs other duties assigned. Knowledge, Skills, and Abilities: Ability to complete most complicated welding repairs on steel and steel alloys utilizing FCAW & SMAW process (all position) and perform advanced torch work, cutting and gouging. Proficient knowledge of equipment and dimensional tools, including their designs, uses, repair and maintenance. Proficient knowledge of specification and drawing interpretations. Proficient knowledge with current computer software, related hardware, and machine interface systems. Adequate work habits, accuracy and exceptional attention to detail and quality of work. Developed technical skills as a qualified welder/fabricator with a demonstrated ability to effectively perform assigned welding tasks. Solid verbal and written communication skills. Developing influencing skills and problem-solving skills with a developing mechanical aptitude. Adaptable to changing schedules and exhibits time management skills. Ability to follow logical troubleshooting and standard operating procedures when performing welding fabrication and repairs. Ability to work independently and as part of a team with a strong work ethic, being dependable, reliable, and honest with demonstrated integrity. Ability to follow manufacturer and company installation and service guidelines to ensure quality work. Required to be a self-starter. Ability to read, write, and understand information with the ability to follow directions and procedures. Able to perform complicated line-boring jobs. Able to cut-out/weld-out broken bolts. Ability to work with, hand grinder/sander, air tools, forklifts, and material handling equipment. Additional Requirements: Welding certifications to complete during this level is SMAW (stick) 1" T-1 Material (3G and 4G) welding processes Failure Analysis Training Ongoing Safety Training Principles of Persuasion Selling Skills MSHA Certification Education and Experience: High school diploma or equivalent required; with additional specialized/technical training or some college courses (Welding Technology) preferred Three years' experience required Preferred license: Flux Cored Arc Welding (FCAW) 3G and 4G Shielded Metal Arc Welding (SMAW) 3G and 4G Gas Tungsten Arc Welding (GTAW) 3G and 4G First Aid/CPR; Confined Space Entry; Methane/O2 Deficiency Supervisory Responsibilities: None Travel: Up to 5% travel may be required for training or work related. Physical Requirements: Ability to function and work around welding machines, overhead cranes, cutting torches and gauges, fit up and layout tools. Ability to move objects and use abdominal and lower back muscles to provide support over time without fatigue. Frequently moves materials weighing up to 50 lb., anything more requires a team lift, or a mechanical lift. Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina. Ascends/descends with gradual or continuous progress by oneself using hands/feet while maintaining at least three points of contact to climb up/down ladders and/or equipment. Be able to maneuver safely and work underneath equipment. Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work. Significant amount of time standing and walking; at times kneeling, crouching, stooping, climbing, and reaching Work Environment: Requires the use of common protective or safety equipment. Regularly works outdoors around moving mechanical parts and noise level may be loud at times. May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and moisture/humidity. Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment Occasionally performs work in cramped spaces and/or high places. Frequently interact with internal/external customers and occasionally interacts with vendors and outside organizations. Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT LI-JH1 #HOLTCAT #CAT #CATERPILLAR #Heavyequipment #Lineboring

At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. **Job Description** **Job Requirements** We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Salary is based upon experience. Base Salary:

Location : Adkins, TX Pay : $20.00 per hour Type : Full-Time - W-2 About the Role Top Metal Solutions LLC is looking for experienced MIG and Flux-Cored Welders to join our growing fabrication team in Adkins, TX. This is a hands-on position for skilled welders who take pride in their craft, work safely, and thrive in a fast-paced production environment. We're building a team of professionals who want stable employment, competitive pay, and opportunities for long-term growth. Key Responsibilities • Perform high-quality MIG and Flux-Cored welding in flat and vertical positions. • Work with materials ranging from 11 gauge up to 1" thick. • Read and interpret welding symbols and basic blueprints. • Identify and correct common weld defects such as porosity or lack of fusion. • Set up, adjust, and operate welding machines (Millermatic 211, 252, 255). • Follow OSHA-based safety standards and maintain a clean, organized workspace. Required Qualifications • Authorization to work in the United States (valid work permit or status required). • Proven experience in metal fabrication or welding shop environments. • Ability to read and understand basic fabrication drawings. • Proficiency with MIG and Flux-Cored welding machines and related equipment. • Valid SSN or ITIN with valid work authorization, government-issued ID, and a U.S. bank account. • Ability to work effectively in a primarily Spanish-speaking environment. • Willingness to obtain AWS D1.1 and/or D1.3 certifications in the future (company-supported at later stages). Physical Requirements • Lift up to 70 lbs without assistance. • Stand and weld for extended periods. • Work in environments with heat, dust, or noise. • Consistent use of PPE as required by OSHA standards. Compensation & Benefits • Competitive Pay: $20.00 per hour (W-2 employment). • Benefits available after 90 days of continuous employment: Employer-sponsored medical insurance (70/50 plan). 401(k) plan with 3% employer match. OSHA-based training and future AWS certifications supported by the company. • Stable, full-time employment with opportunities for growth (including advanced blueprint reading and higher-responsibility roles).

We Build Careers! Pipefitter Welder Tatum TX At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. Job Description Job Requirements We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Salary is based upon experience. Base Salary: Job Req. ID: 1958