Advanced engineer jobs in Minneapolis, MN - 637 jobs

The Regulatory Engineer is a key member of the Company Global Research & Development team, responsible for ensuring that new and existing products are designed, tested, and documented to meet applicable regulatory and certification requirements. This role focuses on achieving maintaining compliance with Factory Mutual (FM), ATEX, and CE certification standards and works cross-functionally with engineering, manufacturing, and external certification bodies to support successful product launches and lifecycle compliance. Essential Functions • Serve as the regulatory and certification subject matter expert for Factory Mutual (FM), ATEX, and CE requirements throughout product development lifecycle. • Partner with product development, mechanical, electrical, and software engineering teams to integrate regulatory requirements product designs from concept through release. • Interpret applicable standards, directives, and codes (e.g., ATEX Directive, CE marking requirements, FM Approval Standards) and translate them into actionable design and testing requirements. • Develop and maintain regulatory compliance plans, certification strategies, and risk assessments for new and modified products. • Act as the primary technical interface with external certification bodies, notified bodies, and test laboratories. • Documentation Preparation: Prepare and submit regulatory documentation to relevant authorities, ensuring accuracy and completeness. • Cross-Functional Collaboration: Work closely with team in research & development, quality, manufacturing, and supply chain to integrate compliance measures early in the new product development process. • Regulatory Reviews: Conduct regulatory reviews and risk assessments to identify potential compliance issues and recommend solutions. • Monitoring Regulations: Stay updated on changes in regulations and industry standards, advising the organization on necessary adjustments to maintain compliance. • Training and Guidance: Provide training to staff on regulatory requirements and best practices, fostering a culture of compliance within the organization. • Audit Participation: Facilitate regulatory inspections and audits, ensuring that all processes adhere to established standards. • Due to the Global Sales and Distribution of our products, the regulatory standards may include, but are not limited to the following: ATEX, Class 1 - Div 1, UL, CE, UKCA (UK Conformity Assessed), CSA, FM, Machinery Directive and Safety Compliances. Qualifications • Bachelor's degree in engineering or related field is required • 3 to 5 years of experience in a regulatory role for engineered products or systems, with a strong understanding of industry regulations and standards. • Working knowledge of Factory Mutual (FM), ATEX, and CE certification processes and requirements. • Strong analytical and problem-solving abilities. • Excellent communication and collaboration skills. • Proficiency in regulatory software tools and electronic submission processes. •Detail-oriented with strong technical writing skills • Willingness to travel occasionally, including international travel if required.

Join a dynamic team in Monticello! Doherty Staffing Solutions is partnering with a leading manufacturing company located in Monticello, MN. We are seeking candidates for a Sr. Manufacturing Engineer role. Compensation for this direct hire opportunity is $108,000-$120,000 per year, plus bonus potential, depending on skills and experience. Interested? Read below for more details! What you'll do as a Sr. Manufacturing Engineer: Review customer specifications and models for manufacturability; recommend improvements when needed Interpret complex geometry, GD&T requirements, and CMM reports to monitor processes Lead automation projects from concept to implementation Apply problem-solving methods to resolve design and manufacturing issues Conduct cycle time evaluations and lead tooling reviews with suppliers Perform PFMEA risk analyses and implement error-proofing solutions Utilize CAD/CAM systems for product and process design What you need to be a Sr. Manufacturing Engineer: B.S. in Engineering or technical degree (Machining, CAD/CAM, Automation) preferred; equivalent experience considered CNC machining experience required 3D CAD/CAM proficiency required; automation experience preferred Skilled in MS Excel and Word Ability to manage shifting priorities and complete projects successfully Strong communication (verbal, written, presentation) Detail-oriented with excellent planning and organizational skills Initiative and ability to work independently and collaboratively Problem-solving and continuous improvement mindset Technical expertise in CNC machining, CAD/CAM, and automation systems #NewCareerByDoherty What are you waiting for? Apply today! Click APPLY NOW to complete our mobile-friendly, online application. For questions or additional information about the Sr. Manufacturing Engineer roles, please contact our Doherty recruiter at **************. Company benefits include health insurance (comprising medical, vision, and dental coverage), disability insurance, life insurance, and a 401(k) plan with matching contributions, as well as paid time off and paid holidays.

Sr. Quality Engineer - 2nd Shift Schedule: Monday - Friday, 3:00 PM to 11:30 PM We're partnering with a leading aerospace manufacturer in the Chaska area that's looking to add a talented Sr. Quality Engineer to their 2nd shift team. This is a hands-on engineering role where you'll work closely with production, suppliers, and leadership to maintain and improve quality systems that meet the rigorous standards of the aerospace industry. Key Responsibilities: Support and lead quality initiatives on the production floor during 2nd shift operations Conduct root cause analysis and implement corrective/preventive actions (CAPA) Develop and maintain inspection processes, documentation, and test procedures Partner with engineering and manufacturing teams to ensure design and production quality compliance Participate in audits and maintain compliance with AS9100 and customer requirements Utilize data-driven methods to identify trends and drive continuous improvement Qualifications: Bachelor's degree in Engineering, Quality, or related technical field 4+ years of experience in Quality Engineering within aerospace, defense, or a regulated manufacturing environment Working knowledge of AS9100 or ISO 9001 standards Strong analytical, communication, and problem-solving skills Ability to work independently and collaboratively on 2nd shift Why Join: 5-day work week (Monday - Friday) Competitive compensation and comprehensive benefits package Opportunity to make a direct impact on critical aerospace programs Strong, team-oriented culture with long-term growth potential If you're an experienced Quality Engineer ready to step into a senior-level role in a respected aerospace environment, we'd love to connect.

No third- party vendors will be accepted. Please do not respond/reach out. Logisolve is seeking a Manager, Business Process Engineering for a 6-month contract to hire position with our direct Healthcare company. The Manager collaborates closely with cross-functional leaders, vendors and employees at all levels. We have adopted a holistic approach to Lean Six Sigma where we identify Process Owners for ongoing continuous improvement in seven key Value Streams. Each Value Stream is supported by a Manager and Business Consultant that evaluates, documents, designs, manage and monitors the end-to-end processes and underlying systems through the continuous application of Lean principles. This position plays a leading role in transitioning to implementation to ensure changes stick, using additional skills in project management and organizational change management (OCM). This position may have multiple headcount accountability. Qualifications: Bachelor's degree or equivalent experience in related field, plus 7+ years of related work experience beyond degree within Business Process Management (BPM), Business Analytics, Program and Project Management, Business Operations, etc. Health Plan/Payer and/or Healthcare experience (7+ years required) Plateform Migration experience preferred. Knowledge of Healthrules and/or Cosmos preferred Proven leadership ability across large cross functional teams required Continuous improvement and implementation experience required Program and Project Management experience required Required License/Certification: Lean Six Sigma Black Belt required Preferred Qualifications: Demonstrated experience managing day-to-day supervision of Business Process Consultants Mastery over all Six Sigma concepts and tools including Value Stream Mapping, Kaizen events, A3, Kanban boards, 5 Whys, FMEA, etc. Functional understanding of Agile methodology preferred Hands-on change management experience preferred Skills and Abilities: Client focused program, project, and process management experience including operational and cross-functional workflows Proven ability to formulate content and present clearly both internally and externally Experience creating, building, and leading cross functional teams from conception through implementation Advanced level of proficiency with Microsoft Teams, Visio, Smartsheet, PowerPoint & SharePoint Experience working with Business and Technology to design future state Hands on experience doing and driving work - not coaching Logisolve offers medical, dental, vision, life insurance, short-term disability, long-term disability, paid sick leave, and retirement benefits to eligible employees.

include (but are not limited to) the following: Understand and manage the capacity milling operation and assist supervising the management of the process performance. Develop safety procedures to be employed by workers operating equipment or working in close proximity to on-going chemical reactions. Troubleshoot problems with chemical manufacturing processes. Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations. Conduct research to develop new and improved chemical manufacturing processes. Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying. Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure. Design and plan layout of equipment. Work with production to start up, enhance and improve all processes related to production and assist with defining SOPs. Prepare estimate of production costs and production progress reports for management. Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations. Develop processes to separate components of liquids or gases or generate electrical currents using controlled chemical processes. Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and two floating holidays per year. You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-time Schedule: Monday - Friday Salary: $80,000 - $115,000

Job Title Advanced Quality Engineer Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a wide variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. The Impact You'll Make in this Role The person hired for the position of Advanced Quality Engineer will be responsible for ensuring consistent product quality aligned with customer needs throughout the designed product life. This specific role will support optical films, adhesives, materials, and novel combinations in Display and Electronics Product Platform through New Product Introduction (NPI) projects and providing support on Change Managed (CMP) projects through appropriate risk analysis (FMEA) and addressing key risks. As an Advanced Quality Engineer you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: Respond to customers as needed (product development and customer specifications, complaints and CAPA, key account management including customer agreements, data analysis, etc.) Lead continual quality improvement projects to improve quality and reduce Defective Parts per Million (DPPM) Lead quality tool usage within project teams Manage customer complaints in 3M Customer Issue Resolution (CIR) system within product responsibility area Develop test methods: documentation, training, Measurement System Analysis (MSA), round robins Develop visual reference standards, visual test methods, and align visual detection systems Product qualification planning, testing, and analysis Lead the development of Quality Functional Deployment (QFD), Failure Mode and Effect Analysis (FMEA), Control Plans Document and improve the Quality Management System Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Bachelor's degree or higher in Science, Technology, Engineering or Mathematics discipline (completed and verified prior to start) One (1) year of experience working or interning in a Quality Engineering, Product Engineering and/or Manufacturing environment in a private, public, government or military environment Additional qualifications that could help you succeed even further in this role include: Experience working with automated inspection systems Bachelor's degree or higher in Engineering, Physics, Chemistry, Mathematics/Statistics or related discipline from an accredited institution Minimum 3-years of Quality Engineering and/or Product Engineering Experience in Manufacturing Experience leading cross-functional teams and/or projects Lean Six Sigma training with proven ability to understand and apply Lean Six Sigma and other quality tools to product, systems and process problems Working knowledge of International Organization for Standardization (ISO) 9001 standards Test method development experience Work location: Work location: This role follows an on-site working model, requiring the employee to work at least four days a week at the 3M Center in Maplewood, MN. Travel: May include up to 25% domestic/international Relocation: May be authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. Applicable to US Applicants Only:The expected compensation range for this position is $98,413 - $120,282, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: ******************************************************************* Faith Posting Date Range 10/01/2025 To 10/31/2025 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M.Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement.Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Basic Qualifications Bachelor's degree in Manufacturing or Industrial Engineering, or a related Science, Engineering or Mathematics field. CLEARANCE REQUIREMENTS:: [Department of Defense Secret security clearance is preferred at time of hire.] Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Developing mission-critical systems that help keep people safe is what we do. At General Dynamics Mission Systems, you'll be part of the team that helps heroes make a true impact. The work we do is important. The challenges we face are career-defining. The opportunity we can offer is one-of-a-kind. We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve our customers' missions in cyber, RF, undersea, interstellar space and everything in between. We will rely on your knowledge and skills to develop, implement and maintain methods, operation sequence and processes in the manufacturing or fabrication of parts, components, sub-assemblies and final assemblies. In this entry-level position, the Manufacturing Engineer will develop strong communications with internal teams to estimate manufacturing costs, determine time standards and make recommendations for tooling and process requirements of new or existing product lines. At GDMS, we continually seek ways to develop and improve manufacturing methods, utilizing our team's knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards. What you'll experience: Technologies that aren't just top-notch, they're often top-secret A team of bold thinkers committed to exploring what's next Opportunities to gain new knowledge - as it's discovered What you bring to the table: A Bachelor's degree in Manufacturing or Industrial Engineering, a related specialized area or field, or equivalent experience Clear understanding of manufacturing engineering concepts, principles, and theories Clear understanding with manufacturing processes and electrical/mechanical components, systems and applications What sets you apart: Creative, innovative responsibilities requiring advanced decision-making skills Team player who thrives in collaborative environments and revels in team success, meeting and exceeding personal and team commitments Commitment to ongoing professional development Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $72,818.00 - USD $80,782.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Under minimal supervisory direction, take a leading role in the development of capable processes and ensures efficient and effective transfer of product into production. Responsible for initiating and conducting defined technical tasks associated within a manufacturing environment. Usually reports to a supervisor or senior technical individual but work direction may come from other sources including cross-functional teams. May also have junior technical individuals (such as technicians) reporting to them. The Manufacturing Engineer ll ensures ProMed's brand, philosophy, systems, policies, and procedures are properly implemented and observed. ESSENTIAL DUTIES & RESPONSIBILITIES Position duties and responsibilities include, but are not limited to the following: * Assess process capabilities, prioritizes process improvement opportunities, and innovates and implements process improvements on multiple and moderately complex processes. * Execute the functional deliverables associated with tool design, Project Management, and Quality Systems. * Creates technical reports, validations, and qualifications by capturing experimental results. * Applies technical knowledge to innovate, design, and develop processes, procedures, tooling and/or automation. * Apply internal and external customer requirements in process development. * Provide Design for Manufacturability input to the tool design. * Ensure proper documentation has been written to meet quality systems requirements. * Using design for manufacturing practices and an understanding of current manufacturing capabilities, translate customer requirements into reasonable product specifications. * Interacts and collaborates with customers to effectively support and recommend appropriate studies for their products or technology. * Oversee development builds associated with the project. * Based on knowledge and understanding of the manufacturing process predict technical interactions and provide contingency plans to mitigate project and manufacturing risks. * Trains and/or provides work direction to technicians and may train manufacturing operators when required. * Identifies and implements a comprehensive education plan to continually advance technical skills and personal development as well as enhancing organizational effectiveness. * Establishes and cultivates a network of support (laboratory, quality, manufacturing, engineering, sales, and marketing) to facilitate completion of assignments. * The employee is expected to develop acceptable work habits, skills, knowledge, and contributions consistent with the Manufacturing Engineer II position level. * This job also requires performing other duties as assigned. QUALIFICATION, EDUCATION & EXPERIENCE To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required: * Bachelor's Degree in engineering or related field with a minimum of 3 years of applicable engineering experience * or Masters (MS) degree in an engineering or physical science field. Preferred: * Experience with hands-on technical work * Demonstrated interest in the medical device and pharmaceutical industry * Experience with MS Office * Problem-solving and critical thinking skills * Strong interpersonal, written, and verbal communication skills * Clearly conveys ideas and receives information effectively * Self-starter with a proven ability to successfully work with minimal supervision * Professional, courteous, and friendly personality * Working knowledge of English (verbal and written) * Injection molding experience (Silicone LSR & HCR, Thermoplastics) * Robotics and End of Arm Tooling Experience (De-molding experience preferred) WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the principal roles and responsibilities of this job. * Exposure to heated/air conditioned, ventilated facilities with florescent lighting; * Exposure to building where a variety of chemical substances are used for cleaning, and/or operation of equipment; * The noise level in the work environment is usually minor; * Duties are performed indoors; * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL, SENSORY, COGNITIVE & NEUROLOGICAL DEMANDS While performing the duties of this job: * The employee may be required to stoop, bend, squat, kneel, reach, stand, walk, lift, pull, push, grasp, talk, hear, see and use repetitive motions; * Specific vision abilities required include close vision such as to read handwritten or typed material and the ability to adjust focus; * The position requires the individual to meet multiple demands from several people and interact with internal and external people; * Employee moves about the building and be able to maneuver in tight spaces between desks, etc.; * Employee may have duties involving walking on even or uneven surfaces; * Employee occasionally to frequently use a whiteboard, which can require grasping whiteboard pens, reaching at, below, or above shoulder height and may require trunk or neck rotation to look back; * Employee may use computers, overhead projectors, TV, VCR, and other work-related equipment, which may require an approximately 25+ pound force to push or pull equipment; * It is necessary to grasp and manipulate pens, markers, scissors, staplers, etc. occasionally to frequently. * Employee must see and hear on a continuous basis as well as speak frequently; * Position varies from standing, sitting, walking, etc. On some occasions it may be necessary to move quickly, run, etc. over smooth or uneven surfaces. ProMed offers a generous benefits package including: * 401k with company match * Profit Sharing program * Medical Insurance * Health Savings Account/Flexible Spending Account * Dental Insurance * Vision Insurance * Life Insurance * Short, and Long-Term Disability Insurance * Critical Illness, Accident, and Identity Theft Protection * Pet Insurance ProMed does not discriminate in employment opportunities or practices on the basis of race, color, creed, religion, national origin, ancestry, age, sex, marital status, order of protection, disability, military status, sexual orientation, gender identity, pregnancy, public assistance, family status, unfavorable discharge from military service, genetic information or other segmenting factor protected by law, or local human rights commission activity.

We are the largest electrical distribution cooperative in Minnesota and is a progressive organization that provides electric service to customers in a 7-county area north of the Twin Cities. Our organization received the highest ranking in reliability and the ability to restore power of all electric utilities nationwide in the 2014 American Customer Satisfaction Index. We are currently seeking an experienced Engineer with excellent analytical skills to guide the Engineering department in developing and applying standards that result in the most cost effective, reliable distribution system. The individual in this position will develop and maintain construction standards and specifications for the distribution system that includes new technologies, materials, methods and products. Key areas of responsibilities include: • Create standards and identify new materials to design, construct, and maintain a quality system while continuously analyzing and striving to make improvements • Develop and maintain construction specifications • Research and prepare major material purchase specifications for equipment • Research and evaluate new products • Review equipment and material failures and implement necessary corrective measures • Provide technical guidance to distribution system design and construction departments • Develop, publish, and distribute construction specification books to ensure all system construction will meet strength and clearance requirements and to minimize construction costs, while meeting standards and codes Required Talents, Skills, Expertise, Education • BS degree in Electrical, Civil, Mechanical or Industrial Engineering • Five years' experience in electric distribution, transmission or substation engineering in a utility focused environment • Engineer-in-training with ability to obtain Professional Engineer license in Minnesota • Knowledge and ability to apply standards and codes • Excellent oral and written communication skills Preferred Talents, Skills, Expertise, Education • Knowledge and ability to apply National Electrical Safety Code • Power emphasis in Electrical Engineering • Professional Engineer license in Minnesota • Drafting software skills SKILLS AND CERTIFICATIONS Engineer-in-training with ability to obtain Professional Engineer license in Minnesota Excellent oral and written communication skills SCREENING QUESTIONS Please seriously evaluate where Ramsey, MN is located and the climate in this area. Based on your evaluation and if necessary, would you be willing to relocate to MN? Do you have a BS degree in Electrical, Civil, Mechanical or Industrial Engineering? Do you have five or more years experience in electric distribution, transmission or substation engineering in a utility focused environment? IDEAL CANDIDATE The ideal candidate has 5+ years' experience in electric distribution system applications. A Power emphasis in Electrical Engineering, Professional Engineer license in Minnesota, familiarity with National Electric Code and drafting software skills would be ideal. IDEAL CANDIDATE SHOULD HAVE WORKED FOR THE FOLLOWING COMPANY(IES): Xcel Energy, other electric co-operatives or municipalities, engineering consulting firms that specialize in power Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

About QTS QTS offers critical end-of-line services for medical device OEMs including finished device assembly, packaging and sterilization management. QTS is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Responsibilities Manufacturing Engineer II or III - NPI Manufacturing Engineer II or III - NPI Ideal Candidate Profile QTS is currently seeking an energetic, responsive, and well-organized full-time Manufacturing Engineer. This position is within our New Product Introduction (NPI) team and will be responsible for developing and executing project plans to source, clean, assemble, package, label, and sterilize new medical devices. Manufacturing Engineer II or III - NPI Job Summary * Develop, maintain, and improve procedures, documentation, tools, fixtures, and programs for end-of-line manufacturing of new and existing medical devices, based on external customer specifications. * Work closely with Project Managers to assist with planning, cost estimation, and timeline development for defined projects. * Interface with Quality to integrate new products or processes into the existing production area. * Initiates and completes technical activities leading to new or improved products or design for manufacturability or processes for current and next generation programs and to meet strategic goals and objectives of the company. * Analyze and solve problems from basic engineering principles, theories, and concepts. * Identify the root cause of manufacturing process and product nonconformities. Identify and implement the necessary actions to correct and prevent recurrence though the corrective and preventative action process. * Perform and document process risk analysis (pFMEA) and implement risk mitigations. * Develop and implement manufacturing process, business process, and product improvements with minimal supervisory guidance. * Maintain and approve device routers and bill of materials. * Develop manufacturing processes utilizing statistical process control as appropriate. * Maintain and approve manufacturing procedures. * Design and coordinate fabrication and implementation of process fixturing or gauging. * Specify and lead qualification activities for new packaging and device components. Qualifications Manufacturing Engineer II / III - NPI Skills and Experience * Bachelor's Degree in Mechanical, Industrial, or other Engineering Science. * 3 - 7 years of experience in the medical device industry. * Knowledge of Medical Device part / production process approval processes (PPAP) for medical devices. * Experience with cleaning, sterilization, packaging, and/or sealing process validations for terminally sterilized medical devices. * Experience working directly with suppliers in a regulated industry. * Understanding of 3D CAD software (i.e., ProE, Unigraphics, SolidWorks, etc.). * Excellent communication and influencing skills. * High level of energy, personal accountability, and integrity. * Detail oriented; checks own work, keeps accurate records, organizes information effectively. * Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher). * Clear and effective verbal and written communication skills. * Ability to work in a fast-paced team environment. * Ability to prioritize and communicate with stakeholders. Desirable Criteria & Qualifications * Continuing Education; including participation in local chapters, associations, and/or organizations. * Experience in an ISO13485/GMP environment. * Engineering experience in a manufacturing facility. * Manufacturing process design and validation. * Manufacturing equipment and fixture/gauge design. * Lean manufacturing, including statistical analysis. * Manufacturing automation, including electronic visual inspection. What Is It Like to Work for QTS? At QTS, we are passionate about quality as the services we provide have a direct impact on the quality of life for others and we pride ourselves on our culture and work environment. Here are some of things that employees have said about working at QTS: * "I would describe my coworkers as kind and friendly." * "… I interned at QTS, then I went back to school… I was brought on as a shared service engineer, then I moved into a role with more customer interaction associated with it. All in all, a good fun ride so far and I can't wait to keep it going!" * "Three words that I would use to describe QTS's culture are: Respectful, Fast-paced, and Fun!" We encourage you to explore the many opportunities that Quality Tech Services could offer you as an employee and as a valued team member. Pay Range USD $75,000.00 - USD $136,200.00 /Yr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. The Manufacturing Engineer I position is responsible for the products manufactured at the STERIS Eden Prairie facility. This position supports manufacturing, design improvements and modifications, process improvements, product transfer and continuous improvements. * This position is based in our Eden Prairie, MN location. * Domestic and international travel required, estimated to be 5%. What you'll do as a Manufacturing Engineer I * Designs and develops product and process improvements. * Supports current product line and new products. * Uses Pro-E and Auto-cad to develop and change designs and document them. * Plans, schedules, conducts or coordinates detailed phases of the engineering work in a part of a major project or in a total project of moderate scope or several projects of smaller in size or scope. * Performs work which involves conventional engineering practice, but may include a variety of complex features such as conflicting design/process, quality and customer requirements. * Works with internal team and external suppliers to resolve design, manufacturing and quality issues. * Performs evaluations and tests to understand and improve the products or manufacturing processes. * Develops designs, cost estimates/should cost models, manufacturing processes and coordinates integration. * Creates/coordinates Bills of Material (BOM), piping/plumbing schematics, pneumatic diagrams, mechanical assembly drawings, component drawings, and all other engineering documents required to support product line/ upgrades. Processes/Coordinates engineering changes and product documentation in a timely manner. * Participates in CAPA and continuous improvement projects. * Participates in audits, investigations, tests, evaluates internal and external mfg. processes and technologies. * Interfaces with vendors and other outside specialists. * Supports compliant process, failure investigations and material review boards. * Validates new processes and products. Develops flow charts and validation protocols. * Performs DOE, DFMA, process capability studies and PFMEA as required. * Engages in strategies for reducing cost, improving quality and productivity by applying lean and six sigma methodologies. * Other duties as assigned. The Experience, Skills and Abilities Needed Required: * Bachelors Degree in Engineering required. * 4 years experience in the engineering field required, * Experience in component design, manufacturing, materials and testing of equipment is required. * Must have validation experience in developing and executing IQ, OQ and PQ. * Knowledge of Value Stream Mapping, JIT, Lean/Flow Manufacturing. * Knowledge of fluid mechanics. * Working Knowledge of process equipment and process control. * Understanding of statistics, DOE and Six Sigma applications. * Understanding of file management and documentation. * Problem solving and trouble shooting skills in pneumatic and mechanical sub-systems. Preferred: * Hands on experience in manufacturing setting preferred. * Experience in machine design and automation preferred. * FDA/GMP regulated manufacturing environment is preferred. * Hands-on experience in Pro-E preferred. * Lean manufacturing experience preferred. * Medical Device manufacturing experience preferred. * Experience in Medical Device development, design transfer, design for manufacturability (DFM), reliability and cost is preferred. * Experience in an ISO audited manufacturing company preferred. * Proficiency in advanced manufacturing processes and automation technologies preferred. * OSHA and Safety regulations knowledge is beneficial. * Minitab application preferred. * Knowledge of design and manufacturing of sterilizers for decontamination and medical applications is preferred. Skills: * Leadership skills in interacting with and leading cross-functional teams. * Organizational, interpersonal, oral and written communications skills. * Project management skills and experience in handling multiple projects. * Able to adapt to changing priorities. * Sense of urgency in resolving conflicts and implementing changes. * Proficiency in MS Word, Excel, Visio, MS project and Power point. What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being and financial future. Here is a brief overview of what we offer: * Market Competitive Pay * Extensive Paid Time Off and (9) added Holidays * Excellent Healthcare, Dental and Vision Benefits * Long/Short Term Disability Coverage * 401(k) with a company match * Maternity and Paternity Leave * Additional add-on benefits/discounts for programs such as Pet Insurance * Tuition Reimbursement and continued education programs * Excellent opportunities for advancement in a stable long-term care #LI-SA2 #ZRSA-1 #LI-Onsite Pay range for this opportunity is $84,362.50 - $109,175.00. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Position summary: The Manufacturing Engineer ll leads the manufacturing of product and implementation of improvements including cost, manufacturability, and quality goals. Responsible for planning, designing, developing, and maintaining programs, training, and manufacturing processes such as: machining, packaging, welding, assembly, and molding. This position will also provide direction and support for existing products including support to the Manufacturing organization to facilitate efficient operations within the production area, to optimize existing processes and to ensure that production goals are met. Responsibilities Manufacturing Engineer Duties and Responsibilities * Initiate and complete technical activities leading to new or improved processes for current and next generation programs and to meet strategic goals and objectives of the company * Analyze and solve problems from basic engineering principles, theories and concepts through to a wide range of complex and advanced problems which require novel and innovative approaches or a breakthrough technology * Interfaces with quality and manufacturing to integrate new products or processes into the existing production area * Maintain and approve device routers and bill of materials * Monitor performance of equipment, machines, and tools and corrects equipment problems or process parameters that produce non-conforming products, low yields or product quality issues * Maintain and approve manufacturing procedures * Design and coordinate fabrication and implementation of process fixturing or gauging * Resolve non-conformances and participates on Material Review Board * Analyze and map processes, assesses efficiency, and implements complex project activities * Assist with part cost estimation * Support and comply with the company Quality System, ISO, and medical device requirements * Read, understand, and follow work instructions and standard work * Partner with other business segments: sales/marketing, customer service, engineering, quality, and finance * Understand customer needs and the core business markets we serve * Ensure business systems are implemented, maintained, and functioning properly * Participate in required company meetings * Maintain an organized work area (5S) * Participate in the Operational Excellence Program * Complete all other work duties as assigned * Ability to work in a manufacturing environment Qualifications Manufacturing Engineer Qualifications * Bachelor's Degree in Mechanical, Industrial, or other Engineering Science * 3 years of engineering experience in a manufacturing setting; including state of the art manufacturing technology/concepts and cost reductions * Manufacturing process design and validation * Manufacturing equipment and fixture/gauge design * Experience in an ISO13485/GMP environment * Engineering experience with medical devices * Lean manufacturing experience * Knowledge of materials and related processes * Project management experience * DOE, SPC, FMEA, GMP, QSR * Manufacturing automation, including electronic visual inspection * 3D CAD software (i.e. ProE, Unigraphics, Solidworks, etc.) Knowledge and Skills: * Continuing Education; including participation in local chapters, associations, and/or organizations * Team dynamic skills (communication, accountability, decision-making, feedback, meeting management, managing conflict) * Knowledge of statistical software rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k) retirement plan with employer match, profit sharing, short- and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: * Onsite Clinic * Paid Parental Leave * Monthly Social Events * Annual Employee Appreciation Week * Volunteer Opportunities * Training and Development Opportunities * Tuition Reimbursement * Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $75,000.00 - USD $112,600.00 /Yr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Full-time Description At UMC, we don't just make products - we innovate, solve problems, and build a better future. As a proud, privately owned second-generation manufacturer, we've earned our reputation as leaders in our industry by producing highly complex parts with precision and ingenuity. What sets us apart? Our people. We're a passionate team that values collaboration, continuous learning, and going above and beyond. If this sounds like your kind of workplace, keep reading! Why UMC? Generous PTO: Start with 3 weeks of paid time off per year, with accrual from day one. Competitive Pay: Attractive base salary for day shift roles, with opportunities for growth. Comprehensive Benefits: Medical, dental, vision, short- and long-term disability, and paid holidays. 401k Match: Dollar-for-dollar matching up to 5%. Professional Growth: Tuition reimbursement for professional development. Work Schedule: Monday through Friday, 8:00 am - 4:30 pm, onsite in Monticello, MN. About the Role As a Manufacturing Engineer , you'll play a key role in shaping the manufacturing processes of UMC's parts. You will collaborate with a skilled team under the guidance of a Senior Manufacturing Engineer. You'll optimize processes, meet customer needs, and drive cost-effective solutions, all while advancing your career and staying aligned with our core values: Great People, Going Beyond, and Growing. What You'll Do Work with other team members, such as Sr. Manufacturing Engineers, Machinists, Application Engineers, Quality Engineers, Sales, CNC Programming, CMM programming, Supply Chain, and Scheduling to quote new and repeat work. Interpret customer requirements by reviewing specifications, prints, and models to ensure the quoted process meets all customer expectations and regulatory requirements. Develop cost effective processes and procedures for the manufacturing of parts and assemblies in conformance with established specifications and customer requirements in conjunction with production personnel. Work with Application Engineers to supply CNC Programming with a complete machining plan, which could include tooling, special tooling, fixtures, tool paths, cutting parameters, and models as required. Analyze feedback/recommendations through a manufacturing change request process to incorporate improvements. Requirements Education and Experience: Bachelor's degree in manufacturing or mechanical engineering or related area or work experience in place of education. 2+ years' experience in Manufacturing preferred. Experience with CAD/CAM systems utilizing solid modeling. Proficient PC skills in a Windows environment. Experience with ERP systems. Experience with quoting machined components. Proficient in the application of GD&T and related inspection methodology preferred. Experience with various machining operations and platforms (Lathes, Mills (3, 4, and 5 Axis), Mill-Turns, Swiss, and EDM). Experience with special processes preferred (e.g. plating, passivation, heat treat, etc.). Knowledge and/or experience in the design and selection of fixturing and tooling for manufacturing of complex parts. Skills and Competencies: Ability to read blueprints with an understanding of GD&T. Ability to participate in technical conversations, express ideas, share information, listen actively, and demonstrate professionalism in written and verbal communications. Ensure all internal and external customers receive positive service experiences. Promotes a sense of urgency to expedite work though area. Excellent attention to detail and problem-solving skills. Able to make effective and timely decisions. Able to work efficiently with minimal supervision. Able to work both independently and as a team. Proficient in various computer software applications such as Microsoft Word, Excel, and Outlook. Embodies the personal commitment to shared core values of UMC: Great People, Going Beyond, and Growing. Culture Fit: You're a team player who thrives on collaboration. You bring a growth mindset and embrace challenges with grit. You care deeply about delivering excellence and going beyond expectations. Travel: Ability to travel, including air, occasionally overnight. May visit customers or suppliers to develop, support, or improve processes. Ready to Join a Winning Team? If you're passionate about building relationships, solving problems, and contributing to a culture of innovation, UMC is the place for you. Let's grow together - apply today and make an impact! UMC is an Equal Employment Opportunity Employer Salary Description $68,000-$103,000

Job DescriptionJob Type: Contract or Direct Hire The Principal Process Development / NPI Engineer leads the development and implementation of cost-effective product designs and manufacturing processes for complex catheter-based delivery systems. This role focuses on process innovation, scale-up, and ensuring high performance and quality during new product introduction. Key Responsibilities Lead development of processes for components, sub-assemblies, and finished devices. Mentor and guide engineers and technicians; provide technical leadership within project teams. Serve as the link between development and operations to ensure smooth manufacturing transfer. Drive creation of robust, repeatable processes that consistently meet design and quality requirements. Develop project plans, schedules, and resource requirements. Support improvements in production controls, SOPs, safety, quality, and training. Plan and maintain layouts for equipment and manufacturing areas. Lead manufacturing launches for new or updated products, including training and performance evaluation. Design or source tooling, fixtures, and equipment, including cost/ROI analysis. Analyze process capability, production efficiency, and quality metrics. Create and revise engineering change documentation (ECOs). Support cross-functional groups such as quality, operations, regulatory, and finance. Identify and implement process improvements and new technologies, including automation. Specify, purchase, install, and validate new equipment or processes. Prepare capital expenditure justifications. Support product transfer from development to manufacturing. Contribute to Lean initiatives and continuous improvement efforts. Qualifications Bachelor's degree in engineering or related field. 10+ years of experience in process or product development involving catheter-based or similar complex assemblies. Strong background in process validation, DOE, process characterization, and test method development. Proven ability to develop manufacturing processes from concept through production scale-up. Experience with DFM, design controls, quality systems, and structured development processes. Ability to manage multiple projects and drive cross-functional results. Strong interpersonal, communication, and influence skills. Proficiency with SolidWorks, Mastercam, and standard office software. Ability to handle sensitive or confidential information. Physical Requirements Ability to sit and work at a computer for extended periods. Ability to lift up to 25 lbs as needed. Good hand-eye coordination and ability to distinguish small components. Ability to wear cleanroom-appropriate attire when required. Pay: 130k-185k DOE Direct Hire Powered by JazzHR aT1Mp2reU8

Minco is a global provider of thermal solutions, temperature sensing and control solutions, and flex circuit solutions for medical, aerospace, defense, oil and gas, power generation, and other high-reliability applications. Our experienced team couples advanced product technologies, expert design and engineering services, and a deep understanding of our customers' applications to provide comprehensive solutions that meet exacting requirements for quality, reliability, and performance. Minco is seeking a Mechanical Process Engineer II to lead and optimize manufacturing processes, ensuring efficiency, quality, and cost-effectiveness. The ideal candidate will have strong problem-solving skills and experience in PCB (printed circuit board) or flexible circuit fabrication, focusing on continuous process improvement and yield optimization. Responsibilities Lead and optimize process improvements, equipment qualifications, and implement solutions to improve yield, reduce scrap, and enhance productivity. Monitor and continuously improve manufacturing processes, achieving performance goals such as less than 3% scrap and over 99% product performance perfection. Identify cost reduction opportunities and implement profit improvement measures across processes and materials. Ensure timely technical support for production, engineering, and quality teams. Develop and manage comprehensive process documentation that ensures safety, quality, and reproducibility. Collaborate with cross-functional teams to support new product introductions (NPI) and ensure compliance with all relevant standards (e.g., NADCAP, AS9100). Implement preventive maintenance plans to maximize equipment uptime and performance. Ensure adherence to all safety standards and company policies. Other duties as assigned Qualifications Bachelor's or Master's Degree in Engineering. Minimum of 3 years of experience in PCB / flexible circuit / heater fabrication and related processes, such as lamination, laser processing, photolithography. Fine wire experience is a plus. Strong project management skills and ability to multitask in a fast-paced environment. Proficiency with risk, failure, and statistical analysis tools, as well as ERP systems and Microsoft applications. Why Minco? At Minco, we offer benefits and services that help balance work life and personal life, a competitive wage and benefits package, opportunities for continuous improvement and personal growth, and company celebrations - some of the many reasons that make Minco a great place to work! Find out why you would love working at Minco by learning more about our company culture and the rewards of working with us at ********************* - then apply! Current Minco Employees: Please apply via your employee page. If you need assistance, please contact ************************ Environment: Office, engineering, and production floor settings with the possibility of some travel. Location: Fridley, Minnesota Benefits: Healthcare benefits are eligible on the first of the month following the hire date, 401K with an employer match after 61 days of full-time employment, Short Term Disability Insurance, Long Term Disability Insurance, HAS, and FSA available, Tuition Reimbursement, Employee Managed Time-Off We are proud to be an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, veteran status, marital status, or disability status. We maintain a drug-free workplace and perform pre-employment substance abuse testing and background checks. Minco Products, Inc. is an E-Verify employer. This position requires the use of information or access to hardware and software that is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons, as defined by ITAR. ITAR defines a U.S. person as a

At Premier Marine, we believe that people come first, and as a valued Manufacturing Engineer, you will play a crucial role in our family-owned business. Guided by our core values of Integrity, Excellence, Attitude, and Collaboration, you'll join a dedicated team where your contributions matter. Here, you'll work on building the world's best pontoons in a supportive environment that focuses on your personal and professional development. We're committed to ensuring you thrive, so together, we can leave a wake that changes lives on and off the water. Job Summary The Manufacturing Engineering is responsible for developing and implementing safe, quality, and cost-efficient methods for production. Production improvements include process development & documentation, tool and fixture development, line balancing, material flow delivery, part presentation, workstation layout, 5S, elimination of errors, problem solving, and automation implementation. The Manufacturing Engineer is also responsible for launching new products through process definition, safety assessment, PFMEA, process capability and validation, fixture/tool ideation, design, and implementation, prototype build, and production maturation. Significant collaboration with cross functional teams including design engineers, production, materials, and facilities. Management Responsibilities The Manufacturing Engineer is not a supervisory role. Essential Job Functions Conduct direct labor studies and drive manufacturing process improvement activities through analysis and benchmarking to improve efficiency, reduce costs, and eliminate bottle necks. Troubleshoots production equipment issues by deploying root cause problem solving and corrective actions. Identify, define, and design process improvement tools such as weld and assembly fixtures. Lead manufacturing new product launch including executing design and process validation activities such as supporting fabrication of prototype parts, assembly of prototype boats, and PFEP. Support autonomous manufacturing implementation projects and other process improvement technologies. Analyzes, evaluates, and maintains manufacturing methods and standards. Provides solutions to problems adversely affecting operator safety, quality, productivity, and/or cost. Create and update standard work documentation for processes. Assists in preparation of departmental budget including material, labor, equipment, and outside procurement costs, and operates within approved parameters. Demonstrate professionalism with all Premier Marine employees and visitors. Provide situational leadership in support of Premier Marine culture and values. Communicate effectively through all department levels to provide a clear and consistent message in a changing environment. Support Tier Continuous Improvement Boards to help facility achieve safety, quality, delivery, and cost improvement goals. Other duties as assigned. Requirements Required Skills/Abilities: Position requires a self-motivated individual who can perform multiple tasks and is able to balance many demands at once. Be a performance, results-driven individual focused on teamwork with the ability to create/sustain a strong, positive, vibrant culture. Strong organizational, communication, and leadership skills. Excellent verbal and written skills required. Proficiency with PC's (MS Office) and CAD software. Excellent mechanical and electrical aptitude. Understanding of Statistical Process Control. Strong analytical and problem-solving skills. Ability to work within and advance the Premier Marine Core Values. Education and Experience Requirements: B.S. in Mechanical Engineering, Manufacturing Engineering, or Industrial Engineering 1-3 years manufacturing experience required. Lean Manufacturing knowledge is desirable and strongly preferred. Physical Requirements The physical demands needed are representative of those that must be met by an employee to successfully perform the essential functions of this job (sitting, standing, walking the manufacturing floor, typing and the ability to lift 15-20 pounds). Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this role. Premier Marine offers a comprehensive total rewards package designed to support employees' health, well-being, and growth. Benefits include medical, dental, and vision coverage; life and disability insurance; 401(k) retirement savings; paid time off; paid holidays; volunteer PTO; and access to an Employee Assistance Program. Additional programs such as a referral bonus, leadership development opportunities, and participation in the Employee Boat Club are also available. *The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. This document does not create an employment contract, implied or otherwise, other than an "at-will" employment relationship. Premier Marine, LLC retains the discretion to add duties or change the duties of this position at any time. Salary Description $68,000 - $82,000 / year

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Job Description The Manufacturing Engineer will provide manufacturing engineering support to manufacturing lines producing Class III long term implantable medical devices. The manufacturing operations involved may include the following: • Silicone Rubber Molding • Crimping • Resistance Welding • Laser Welding • Adhesive application • Cutting/Trimming • Flushing • Curing/Annealing • Inspection and Testing Position Responsibilities: Daily interaction with the manufacturing teams providing hands-on support and troubleshooting of manufacturing processes and equipment. Provide detailed engineering analysis and documentation in the management of material disposition, manufacturing process updates, qualification activities, compliance activities, and CAPA's. Work with the calibration and maintenance groups to ensure that equipment maintenance and calibration is completed on time. Perform Equipment Installation, Mfg Process Characterization, Operational Qualification, and Performance Qualification (IQ/OQ/PQ) activities, as well as Software Validation and Test Method Validation for manufacturing equipment and processes. Generate all related documentation in compliance with internal and external requirements. Support manufacturing facility transfer and product transfer activities to offshore facilities. Develop technical solutions to difficult problems, finding solutions that are thorough, practical, and consistent with organization objectives. Ensure personal understanding of all applicable quality policy and quality system procedural requirements. Complete required training on time. Qualifications Basic Qualifications: • BS in Engineering • 5 years minimum engineering experience in the medical device field • Experience with manufacturing process qualification (IQ/OQ/PQ), Software Validation, and Test Method Validation • Experience with the FDA QSR and ISO13485 Desired/Preferred Qualifications: • Experience with Class III medical device manufacturing. Additional Information Please contact: Sagar Rathore ************ sagar.rathore(@)collabera.com

Under minimal supervisory direction, take a leading role in the development of capable processes and ensures efficient and effective transfer of product into production. Responsible for initiating and conducting defined technical tasks associated within a manufacturing environment. Usually reports to a supervisor or senior technical individual but work direction may come from other sources including cross-functional teams. May also have junior technical individuals (such as technicians) reporting to them. The Manufacturing Engineer ll ensures ProMed's brand, philosophy, systems, policies, and procedures are properly implemented and observed. ESSENTIAL DUTIES & RESPONSIBILITIES Position duties and responsibilities include, but are not limited to the following: Assess process capabilities, prioritizes process improvement opportunities, and innovates and implements process improvements on multiple and moderately complex processes. Execute the functional deliverables associated with tool design, Project Management, and Quality Systems. Creates technical reports, validations, and qualifications by capturing experimental results. Applies technical knowledge to innovate, design, and develop processes, procedures, tooling and/or automation. Apply internal and external customer requirements in process development. Provide Design for Manufacturability input to the tool design. Ensure proper documentation has been written to meet quality systems requirements. Using design for manufacturing practices and an understanding of current manufacturing capabilities, translate customer requirements into reasonable product specifications. Interacts and collaborates with customers to effectively support and recommend appropriate studies for their products or technology. Oversee development builds associated with the project. Based on knowledge and understanding of the manufacturing process predict technical interactions and provide contingency plans to mitigate project and manufacturing risks. Trains and/or provides work direction to technicians and may train manufacturing operators when required. Identifies and implements a comprehensive education plan to continually advance technical skills and personal development as well as enhancing organizational effectiveness. Establishes and cultivates a network of support (laboratory, quality, manufacturing, engineering, sales, and marketing) to facilitate completion of assignments. The employee is expected to develop acceptable work habits, skills, knowledge, and contributions consistent with the Manufacturing Engineer II position level. This job also requires performing other duties as assigned. QUALIFICATION, EDUCATION & EXPERIENCE To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required: Bachelor's Degree in engineering or related field with a minimum of 3 years of applicable engineering experience or Masters (MS) degree in an engineering or physical science field. Preferred: Experience with hands-on technical work Demonstrated interest in the medical device and pharmaceutical industry Experience with MS Office Problem-solving and critical thinking skills Strong interpersonal, written, and verbal communication skills Clearly conveys ideas and receives information effectively Self-starter with a proven ability to successfully work with minimal supervision Professional, courteous, and friendly personality Working knowledge of English (verbal and written) Injection molding experience (Silicone LSR & HCR, Thermoplastics) Robotics and End of Arm Tooling Experience (De-molding experience preferred) WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the principal roles and responsibilities of this job. Exposure to heated/air conditioned, ventilated facilities with florescent lighting; Exposure to building where a variety of chemical substances are used for cleaning, and/or operation of equipment; The noise level in the work environment is usually minor; Duties are performed indoors; Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL, SENSORY, COGNITIVE & NEUROLOGICAL DEMANDS While performing the duties of this job: The employee may be required to stoop, bend, squat, kneel, reach, stand, walk, lift, pull, push, grasp, talk, hear, see and use repetitive motions; Specific vision abilities required include close vision such as to read handwritten or typed material and the ability to adjust focus; The position requires the individual to meet multiple demands from several people and interact with internal and external people; Employee moves about the building and be able to maneuver in tight spaces between desks, etc.; Employee may have duties involving walking on even or uneven surfaces; Employee occasionally to frequently use a whiteboard, which can require grasping whiteboard pens, reaching at, below, or above shoulder height and may require trunk or neck rotation to look back; Employee may use computers, overhead projectors, TV, VCR, and other work-related equipment, which may require an approximately 25+ pound force to push or pull equipment; It is necessary to grasp and manipulate pens, markers, scissors, staplers, etc. occasionally to frequently. Employee must see and hear on a continuous basis as well as speak frequently; Position varies from standing, sitting, walking, etc. On some occasions it may be necessary to move quickly, run, etc. over smooth or uneven surfaces. ProMed offers a generous benefits package including: 401k with company match Profit Sharing program Medical Insurance Health Savings Account/Flexible Spending Account Dental Insurance Vision Insurance Life Insurance Short, and Long-Term Disability Insurance Critical Illness, Accident, and Identity Theft Protection Pet Insurance ProMed does not discriminate in employment opportunities or practices on the basis of race, color, creed, religion, national origin, ancestry, age, sex, marital status, order of protection, disability, military status, sexual orientation, gender identity, pregnancy, public assistance, family status, unfavorable discharge from military service, genetic information or other segmenting factor protected by law, or local human rights commission activity.

Ramsey,MN Exp 2-5 yrs Degree Bach Job Description We are the largest electrical distribution cooperative in Minnesota and is a progressive organization that provides electric service to customers in a 7-county area north of the Twin Cities. Our organization received the highest ranking in reliability and the ability to restore power of all electric utilities nationwide in the 2014 American Customer Satisfaction Index. We are currently seeking an experienced Engineer with excellent analytical skills to guide the Engineering department in developing and applying standards that result in the most cost effective, reliable distribution system. The individual in this position will develop and maintain construction standards and specifications for the distribution system that includes new technologies, materials, methods and products. Key areas of responsibilities include: • Create standards and identify new materials to design, construct, and maintain a quality system while continuously analyzing and striving to make improvements • Develop and maintain construction specifications • Research and prepare major material purchase specifications for equipment • Research and evaluate new products • Review equipment and material failures and implement necessary corrective measures • Provide technical guidance to distribution system design and construction departments • Develop, publish, and distribute construction specification books to ensure all system construction will meet strength and clearance requirements and to minimize construction costs, while meeting standards and codes Required Talents, Skills, Expertise, Education • BS degree in Electrical, Civil, Mechanical or Industrial Engineering • Five years' experience in electric distribution, transmission or substation engineering in a utility focused environment • Engineer-in-training with ability to obtain Professional Engineer license in Minnesota • Knowledge and ability to apply standards and codes • Excellent oral and written communication skills Preferred Talents, Skills, Expertise, Education • Knowledge and ability to apply National Electrical Safety Code • Power emphasis in Electrical Engineering • Professional Engineer license in Minnesota • Drafting software skills SKILLS AND CERTIFICATIONS Engineer-in-training with ability to obtain Professional Engineer license in Minnesota Excellent oral and written communication skills SCREENING QUESTIONS Please seriously evaluate where Ramsey, MN is located and the climate in this area. Based on your evaluation and if necessary, would you be willing to relocate to MN? Do you have a BS degree in Electrical, Civil, Mechanical or Industrial Engineering? Do you have five or more years experience in electric distribution, transmission or substation engineering in a utility focused environment? IDEAL CANDIDATE The ideal candidate has 5+ years' experience in electric distribution system applications. A Power emphasis in Electrical Engineering, Professional Engineer license in Minnesota, familiarity with National Electric Code and drafting software skills would be ideal. IDEAL CANDIDATE SHOULD HAVE WORKED FOR THE FOLLOWING COMPANY(IES): Xcel Energy, other electric co-operatives or municipalities, engineering consulting firms that specialize in power Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc