Apprentice jobs in Aberdeen, WA

This is a union referred position. If you are interested in applying for this position, you must first call the union hall at the following number. PHONE: ************ IBEW Local 659 4480 Rogue Valley, Suite 3 Central Point, Oregon 97502 BENEFITS: Union Benefits offered Plenty of growth opportunities On the job training Potential overtime Get paid weekly, etc. Title: Trimmer/Climber Trainee Type: Full-Time/Non-Exempt Reports to: Foreperson/General Foreperson Essential Functions: Trims and/or removes trees by climbing with the aid of a ladder, safety belt, climbing line, powered trimmer lift truck, or works from the ground using saws/pruners. Will cut branches or trunk sections and drops or lowers them to the ground with lines. Uses appropriate tools, will fell trees or trimmed trunks and split them into manageable pieces. Sprays stumps and brush with hand-spraying equipment to prevent further growth. Loads and unloads trucks with logs, stumps, brush, and debris and/or feeds brush into a wood chipper. Repairs slight damage to lawns, fences, and walks caused by tree trimming. Relays hand-signals, directs traffic, drives and operates trucks and equipment as assigned, and keeps trucks and work area clear and orderly. Trains new employees on proper procedures. Safeguards employees and public from hazards in and around work area. Cooperates with customer, police, and fire departments when blocking street or driveways. Sets up barriers, warning signs, flags, etc. to protect employees as well as the public. Trained to perform tree and bucket rescue. Assumes responsibility for the inspection and proper working conditions of tools, trucks, and other work equipment. Requests repair or replacement of equipment when necessary. Works around hazardous equipment and in close proximity to energized power lines. Works around excessive noise from machines, chainsaws, wood chipper and must wear proper personal protective equipment. Is exposed to all temperatures and weather; will be exposed to nature, i.e., irritating plants, biting or stinging insects, dust, etc. May work on rough terrain. Helps enforce on-the-job safety practices for crew members. Services truck, chipper and equipment, maintaining them in a neat, clean, and specified mechanical order. Reports the need for equipment and truck maintenance to crew lead. Performs other related duties as required or assigned. Minimum Requirements: Has a minimum of 3 months experience working on tree trimming or clearing crews and/or has successfully completed applicable performance reviews. Enforces on-the-job safety practices. Must be able to wear necessary personal protective equipment (PPE) as required. Needs to be able to enter and exit a vehicle numerous times per day. Must be able to withstand exposure to all kinds of weather while completing work tasks such as rain, heat, sun, cold, snow. Must be able to write, read, and comprehend written and verbal job instructions/information. Must be able to communicate with others and represent Wright Tree Service in a professional manner. Possess the ability to lift, move, and maneuver up to 50 pounds on an infrequent basis and up to 30 pounds on a frequent basis. Ability to work long hours and overtime during emergencies (including holidays, weekends, storm work) and will be subject to call-out work. Ability to operate and service all required tools and equipment. Has a valid driver's license (dependent on Division and utility/contract requirements) and be able to pass a pre-employment drug test. Maintains a herbicide applicator or operators certification and license as required by Wright Tree Service and local, state, and federal law. Must have valid First-Aid and CPR cards. Must complete and pass a Climber Trainee Performance Review. Wright Tree Service employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. ******************************************

Under guidance and supervision of a Licensed A&P Mechanic, performs preventive maintenance, repair, modifications and other maintenance of aircraft, aircraft components, assemblies and parts in accordance with company policies and Federal Regulations. Duties & Responsibilities Under Direct Supervision from Journeyman level mechanics in various cells perform maintenance, repair, overhaul and fabrication of parts and assemblies, including disassembly and assembly of parts, components, and/or aircraft to appropriate documents and specifications, and /or remove and install components on the aircraft at the Erickson facilities. Completes on-the-job-training (OJT) forms and any required training. Perform housing keeping and other organizational requirements, including general cleanup of work areas. Maintains regular and prompt attendance and time clock adherence. Demonstrates effective and appropriate conduct with co-workers. Work in a team environment. Performs other duties as assigned or required. Minimum Qualifications High School Diploma or equivalency, Valid Driver's license. Must pass a math placement exam at Rogue Community College (Math 65 or higher) or show prior completion with a copy of transcript. Read, write and understand English. Must have completed 250 hours of employment at Erickson Inc., or a registered training agent. Register at RCC and commit to paying for and attending night classes as scheduled. Maintain a grade level of “C” or above for each course. Commit to 2½ year program (minimum of 4812 hours OJT and 352 hours of theory classes) and comply with the State of Oregon Standards of Apprenticeship. Agree to wage progression schedule in compliance with State of Oregon Standards of Apprenticeship. Proven record of meeting or exceeding job performance expectations. Comply with Federal and State Laws.

Remuneration/Benefit: Great Salary About the role: Start a rewarding career with Aurizon, Australia's largest rail freight operator. As an Apprentice in Surface Preparation and Coating Applications (Cert III MSM30216), you'll gain valuable trade qualifications, on-the-job experience, and a pathway to a long-term future in the rail industry. Learn from experienced tradespeople while gaining a nationally recognised qualification Earn while you learn in a safe, team-focused environment Build a long-term career with Australia's largest rail freight company About you: You're reliable, motivated, and ready to learn. You'll bring a positive attitude, attention to detail, and the willingness to commit to a structured 4-year apprenticeship with ongoing mentoring, training, and career development. What we offer you: At Aurizon, we support the development and growth of our employees. With a national portfolio of operations, we offer long-term and exciting career opportunities. Some of our benefits include: Development and growth opportunities. Access to mentoring and development programs. Discounts on selected health insurance funds, personal travel, gyms, vehicles and retail brands. Parental leave program and super booster. About Aurizon. Aurizon is Australia's largest rail freight operator and a top 100 ASX company. Each year, we deliver more than 250 million tonnes of Australian commodities right across the country. Aurizon is crucial to the Australian economy, connecting miners, primary producers and industry with international and domestic markets. Look to Aurizon for a diverse and collaborative culture. At Aurizon, we are proud of our diverse, collaborative, creative and high-performance culture. We celebrate the contribution of every employee and provide opportunities for career development in a dynamic, caring, and inclusive work environment. To learn about us and our company values, please visit **************************

The Aerial Lift Trimmer is responsible for trimming, pruning, and removing trees with the aid of a bucket truck or other equipment or tools. Previous experience operating an aerial lift trimmer with a tree care company is required. Driver's license is required. Candidates will be dispatched by IBEW. ESSENTIAL FUNCTIONS Always follow and help enforce safe practices and rules Assist in preparing truck and materials needed for each day at General Foreperson's direction Perform professional tree maintenance activities as directed by General Foreperson Clear and trim trees and brush away from utility lines; remove branches and tree material Clean up and dispose of all debris Maintain and keep track of all tools and equipment used in daily operations Constantly observe and practice climbing and tree maintenance skills in a continued effort to improve your own professional skills Be ready and willing to assist other crew members in all aspects of daily activities Safeguard employees and public from hazards in and around the work area by enforcing safe job practices, keeping work area clean and orderly, and staying in frequent voice communication with co-workers Perform duties for storm work as needed SUPERVISORY RESPONSIBILITIES Aerial Lift Trimmers have no direct reports. EXPERIENCE REQUIREMENTS Prior experience in electric utility vegetation management, construction, logging, landscaping, mechanical, or military industries preferred; previous aerial lift experience preferred EDUCATION REQUIREMENTS High School diploma or education equivalent preferred KNOWLEDGE, SKILLS, AND ABILITIES Must be able to demonstrate a working knowledge of all knots, ropes and rigging devices used in tree trimming and removal operations. Must be able to identify tree species Must be familiar with electrical hazards and appropriate operating procedures when in proximity to electrical conductors and aerial techniques in the event of an emergency aloft Must be able to work and maneuver at considerable heights under varying and adverse weather conditions Must possess physical strength and agility, good balance, good depth perception and the ability to hear verbal instructions from a distance. Must be able to obtain and maintain first-aid certification and CPR Must be able to administer and implement emergency rescue techniques, including tree rescue and all applicable first aid techniques Must be able to quickly remove yourself from a potential danger area Must be able to wear necessary personal protective equipment (PPE) Must be able to travel out of town for storm restoration work when needed Work authorization requirements: Must meet I-9 requirements. Affirmative Action/EEO statement: Xylem Tree Experts and Kendall Vegetation Services provide equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice. Benefits Offered: This is a full-time position that offers health insurance benefits for medical, vision, and dental, as well as the option for enrollment in a 401K.

Founded in 1956, the Jacuzzi Brand has grown to become the modern-day Jacuzzi Group, the premier manufacturer of functional products for the home and outdoor space found in more than 60 countries. Jacuzzi Bath Remodel is the fastest growing business unit of Jacuzzi Group with 10 successful locations launched nationwide in under 4-years. Jacuzzi Bath Remodel combines our premium materials, knowledgeable sales team, experienced in-house certified installers and over 60 years of proven excellence to deliver the highest standard of customer satisfaction. Jacuzzi Bath Remodel is hiring Construction - Apprentice Installers. If you are looking for a career in Construction or Installation, please apply now! What we offer our Construction - Apprentice Installers: We provide trucks and tools! 40-hour work week with plenty of overtime (paid at 1.5x). Typical schedule is Monday- Friday + overtime. Hourly pay rate of $21.00/hr. A clear path to advancement and career development, become a Lead Installer in under a year! Requirements of a Construction - Apprentice Installer: 1+ years of experience in general construction. Basic knowledge of tools and construction practices. Some experience with carpentry, demolition, framing, drywall installation or repair, tile work, remodeling, or plumbing. Must be proficient with using a tape measure. Comfortable lifting 50+ lbs. consistently. Ability to interact professionally with customers. For insurance purposes Apprentice Installers must be able to pass a DMV check. What we are looking for in our next Construction - Apprentice Installer: Punctual Hard worker Willingness to learn and grow within the company. Desire to be with a great company long term. Providing a great customer experience Benefits for our Construction- Apprentice Installer: Medical, dental, vision, life insurance plans Paid vacation and holidays Paid Training 401(k) with matching program Advancement Opportunities

Falcon Services, Inc. is currently hiring for a full-time Apprentice Electrician - Electrical Technician to learn and grow under the mentorship of our Journeyman Electrician in the Portland, OR area. This apprentice position earns a competitive wage of $17.75/hr-$35.50/hr, depending on which period of the program you're currently in. In addition to competitive pay and our team-oriented culture, we offer our Apprentice Electricians - Electrical Technicians the following benefits: Morning coffee AFLAC Paid birthdays Paid holidays after your first year Christmas bonuses and dinners Weekly pay Direct deposit Ongoing training So, now that you've learned the who, what, where, and why, you may be wondering HOW? It's easy! Just fill out our initial mobile-friendly online application. We hope to meet you soon! DAY-TO-DAY This full-time position typically works a Monday through Friday schedule from 8 AM to 5 PM. Occasionally, there are larger or emergent electrical jobs that require you to work overtime. As an Apprentice Electrician - Electrical Technician, you eagerly learn from one of our Journeyman Electricians. Under their direction, you assist with electrical jobs in accordance with current electrical codes. Highly motivated to increase your skill set, you carefully observe and are quick to ask questions. You enjoy taking what you learn and applying it to every job. Through extensive training, you learn everything from implementing safety protocols and codes to interacting with customers. You are excited to be one step closer to becoming a reliable professional while learning from the best in the business! ABOUT FALCON SERVICES, INC. Falcon Services is a locally owned home services company offering a diverse and experienced background in both residential and light commercial contracting. Regardless of scale or budget, we work diligently to ensure that a highly positive customer experience is delivered with each and every project. Embracing our core values of honesty, integrity, trust, and reliability, our professional team plays a vital role in maintaining our extremely positive high-performance reputation in the region. Because they deliver top results for our clients, we proudly offer them competitive pay, fantastic benefits and perks, and a supportive company culture. OUR IDEAL APPRENTICE ELECTRICIAN - ELECTRICAL TECHNICIAN Teachable--You are eager to learn and put new skills into practice. Ambitious--You are motivated to work hard and accomplish goals. Detail-oriented--Even the smallest details do not get overlooked. Professional--No matter the situation, you present yourself and our business in a positive, professional way. Customer service skills--Meeting the customers' needs is what it's all about, and you do it with ease. If this sounds like you, keep reading! REQUIREMENTS FOR AN APPRENTICE ELECTRICIAN - ELECTRICAL TECHNICIAN Enrolled in the final terms (6, 7, and 8) of an accredited apprenticeship program Valid driver's license and a clean driving record Electrical experience preferred If you meet the above requirements, we need you. Apply today to join our team! Location: 97225 Must have the ability to pass a drug test and background check.

Job Description All Seasons Inc. Tacoma, WA We are a family-owned and operated HVAC company proudly serving Tacoma and the surrounding areas with expert, reliable services. Our team has 25 years of experience in the design, installation and repair of residential and commercial heating and AC. We continually strive to provide expert heating, air conditioning, energy efficiency and indoor air quality solutions to our customers. We have an immediate opening for an HVAC Apprentice! Someone with 6 months or more of residential and/or light commercial retrofit installation experience, or combination of education and experience. We offer full-time, year-round work, company paid training for industry certification including NATES and Electrical Trainee instruction and hours. What we have to offer: Locally owned and operated Work with a licensed electrician and log electrical trainee hours for 06B & 06A electrical license Company-paid dealer training, NATE Certifications Professional career growth opportunities Carrier Authorized Dealer Benefits: Medical 75% employer paid IRA with 3% match 80 hours of PTO accrued 6 Paid holidays Company uniform/phone Job Title: HVAC Apprentice Pay Scale: $25.00 - $32.00 per hour, depending on experience Work Hours: Monday through Friday, 7:00am to 5:00pm, with occasional overtime Shop Location: Tacoma What you will be doing: Working with a lead installer Residential retrofit/change out installs Installing Gas Pipe Refrigeration Pipe Duct work Mini splits, heat pumps, furnaces, air handlers, split systems etc. Brazing and soldering Able to lift up to 100 lbs. with assistance Consulting and educating customer on equipment being installed and Indoor Air Quality accessories Qualifications / skills: 6 months + HVAC installation experience, or combination of education and experience EPA Universal Certification 06B or 06A Electrical trainee card or obtain once employed Certification of completion from trade school desired Understanding of HVAC functional design and installation of ductwork systems Willingness to invest time in training and seminars, including industry certifications / NATES, and Electrical Trainee instruction & hours High school diploma or equivalent Valid driver license and insurable driving record Check us out online: ****************

Full-time Description Apprentice Electrician Tier 1 Department: Construction Reports to: Electrical Manager Employment Status: Full- Time FLSA Status: Non-Exempt Assists licensed electricians in the installation, maintenance, and repair of electrical systems in residential, commercial, or industrial settings. Under close supervision, the apprentice gains hands-on experience while learning to read blueprints, follow wiring diagrams, and work safely with electrical tools and materials. This entry-level role is part of a structured apprenticeship program designed to build the knowledge and skills necessary to become a licensed electrician. Essential Duties The essential functions include, but are not limited to the following: Assists with the installation, maintenance, and repair of electrical systems while gaining hands-on experience. Performs Basic Electrical Tasks: Helps with running conduit, pulling wire, installing electrical boxes, and connecting wiring to fixtures and equipment. Ensure Code Compliance: Learn and apply relevant electrical codes, standards, and safety regulations to support quality workmanship and safe job site practices. Operate Tool and Equipment: Properly and safely use hand and power tools, measuring instruments, and other electrical equipment. Engage in Continuous Learning: Actively participate in classroom instruction, on-the-job training, and skills development to keep pace with evolving technologies and industry best practices. Other Responsibilities Receive, prioritize, and complete daily work orders in a timely and efficient manner. Monitor and maintain inventory of tools, equipment, and materials to ensure job readiness and minimize downtime. Work with supervisors to ensure project completion has met or exceeded customer expectations, including but not limited to communicating clearly and professionally with site supervisors. Confirming satisfaction with results and addressing concerns. Representing the company positively and uphold worksite professionalism. Perform preventive maintenance on hand tools and electrical related equipment to ensure longevity and reliability. Adhere to all company policies, industry regulations, and safety procedures, including maintaining a clean and organized work environment. Provide support across other departments as needed during staff shortages, employee absences, or when assisting with tasks related to light construction or general facilities maintenance. Other duties as assigned. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodation may be provided to enable individuals with disabilities to perform the functions. Physical Activities: Sitting Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Standing Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Walking Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Climbing/Balancing (ability to use a ladder) Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Stooping/Twisting Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Kneeling Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Squatting Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Crawling Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Push/Pull Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Reaching Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Gripping Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Pinching Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Neck Rotation/Extension Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Foot Use Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Keyboarding/phone usage Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Repeating motions with may include the wrists, hands and or fingers. Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Operating machinery and/or power tools Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Operating motor vehicles or heavy equipment Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Lift/Carry: Lift/Carry objects up to twenty pounds Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Lift/carry objects up to fifty pounds. Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Heavy work that involves moving objects up to one hundred pounds or more Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Environmental Conditions: Low temperatures Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ High temperatures Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Outdoor elements such as precipitation and wind Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Working at Heights Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Uneven Ground Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Excess Noise Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Exposure to Dust/Fumes Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Exposure to Hazards Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ Exposure to Biohazards Never 0% Occasionally 1-33% Frequently 34%-66% Constantly 66%+ This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. Requirements Maintain a valid driver's license and ability to drive a company truck or van. Entry level experience with electrical repairs, maintenance and installation techniques as defined by assisting with the installation of wiring, outlets, light fixtures, and circuit breakers. Supporting licensed electricians with routine maintenance or simple repairs. Understanding how to safely shut off and restore power when needed. Entry level knowledge of The National Electrical Code (NEC) and why it is important for safety and compliance. Entry level ability to read and interpret blueprints, diagrams, schematics, and written reference material including but not limited to understand basic electrical symbols and layouts. Follow simple wiring diagrams to assist with installations. Read instructions for equipment or tools. Ability to perform mathematical calculations as defined by using basic math to measure distances, calculate loads or amperage, and determine wire sizes. Converting units (e.g., inches to feet, watts to kilowatts). Applying formulas related to voltage, resistance, and current (Ohm's Law). Comfortable with fractions, decimals, and percentages. Novice understanding and ability to diagnose and resolve problems as defined by Identify basic issues like tripped breakers, faulty switches, or non-working outlets. Use simple diagnostic tools under supervision (e.g., voltage testers, multimeters). Follow a logical troubleshooting process with guidance from a journeyman or master electrician. Ask the right questions and document findings. Experience with using hand and power tools. Hand tools such as screwdrivers, pliers, wire strippers, and tape measures. Power tools such as drills, saws, and conduit benders. Understanding of tool safety, storage, and basic maintenance. Salary Description $20-$30 per hour

Stewart Mechanical Inc. is currently hiring HVAC apprentices interested in gaining experience in the HVAC field with advancement goals. Apprentice applicants should have trade experience and be willing able to join an apprentice program. PRIMARY RESPONSIBILITIES: Responsible for cleaning and preparing construction sites in preparation for HVAC work. Assists in unloading and loading materials Assists when necessary with foremen and apprentices. Understanding of basic construction tools Keep work area clean, preparing equipment for use and returning equipment after use. It is important that apprentice has an ability to see what needs to be done to keep the crew moving efficiently, and is a self-starter. Construction experience is a plus Equipment / Tools Work with power tools (saws, drills, jack hammers, roto hammers, etc.) Work with equipment (Jumping jacks, scissor lifts, excavators, etc.) Requirements Reliable transportation Drive motor vehicles Valid drivers license Proven attendance record Work outdoors Work with others Follow instructions Attend apprenticeship school

Meet the team that brings our projects to life. From logistics to electrical work, everyone in the field plays a critical role in building, powering, and delivering success on a jobsite. Our logistics professionals keep construction moving by ensuring a steady flow of inventory. They bring attention to detail and strong organizational skills as they procure tools and materials for our electricians. Apprentice electricians are the powerhouses behind our most dynamic projects, while summer interns and new graduates kick off their careers as industrial electrical professionals. These team members work closely with our journeyman electricians-seasoned experts who lead and mentor crews while completing complex projects. Our journeyman electricians partner with field foremen and site superintendents, who coordinate work, manage risks, and keep projects on track through planning, motivation, and communication. Our I&E, service, and maintenance teams ensure project performance by installing, testing, troubleshooting, and calibrating equipment. Across roles, we all champion safety-empowering employees to lead as safety shareholders, uphold zero-injury expectations, and care for our crews, company, and families. Apprentice Electrician Responsibilities * Measure, cut, and bend conduit using a tape measure and appropriate power/hand tools * Operate power tools such as drills, saws, pullers, tuggers, etc. * Install conductors in race way and cable tray using manual and power equipment * Assist in lifting, positioning, and fastening objects, such as wiring, conduit, and motors * Perform minor repairs, such as replacing fuses, light sockets, bulbs, and switches * Disassemble defective electrical equipment, such as motors, using appropriate power/hand tools * Load, transport, unload, and furnish Journeyman and Foreman Electricians with materials, equipment, tools, and supplies * Use ladders, scaffolding, scissor and boom lifts * Perform housekeeping duties, as required * Other duties as assigned by field leaders Qualifications Education & Experience: Candidates with a certificate or AS degree in electrical technology, electrical construction, instrumentation or similar or equivalent experience preferred. A minimum of 2 years of electrical experience required. Location/Travel: This position will require travel in/around Hermiston, OR - up to/within a 200-mile radius. Applicants must be permanently located in/around the office location or be willing to permanently relocate. Applicants must have reliable transportation and a valid driver's license. Per diem and mileage stipends applicable per company policy. Work Schedule: Start times, break times and work hours vary per site and stage of our projects. Our employees work more than 40 hours per week but no more than 60, as part of our commitment to safety. Due to the type of construction, weekend work maybe required on occasion. Work Environment: While performing the duties of this job, this role is often exposed to high/precarious places, risk of electrical shock, and all outside weather conditions. This role is expected to climb and work at heights and in confined spaces. The noise level in the work environment is usually moderate. Due to the nature of our work and our client base, this role may involve tasks in an environment exposed to dust. Candidates should be comfortable working in these conditions and complying with safety standards to protect their well-being. Benefits of Working at Interstates: * 401(k) Retirement Plan + Company Match * Health, Dental, and Vision Insurance Benefits (Short & Long-Term Disability, Group Life Insurance, and more) * Company Discount Perk Program (Access to discounts with renown brands across the country) * Paid Time Off & Holiday Pay, Flexible Schedule (Support work/life balance) * Bonus Incentives (End of Fiscal Year Incentives and Merit Increases) * Per Diem/Travel Pay or FAVR Program Benefits (as applicable) * Family & safety culture - a team that cares about you as a whole person, not just what you do at work * Company Sponsored Holiday Events, Team Celebrations, and Community Outreach Volunteer Time * Advancement Opportunities unique to our employee's long-term goals * Company Issued Cordless Milwaukee Tool Kit * Continuing Education & Journeyman Licensing Renewal Assistance * Double Pay for Sunday Work, Triple Pay if working an occasional holiday

Salary: $1,000 per credit* Classification: Adjunct Faculty Reports to: Dean of Business & Technology Olympic College is recruiting part-time faculty to teach Helper Trade Fundamentals I at the Puget Sound Naval Shipyard, in the evenings. The course is part of the Helper Certificate Program designed to develop the general education and technical skills of entry-level employees. Olympic College seeks applicants who are dedicated to student-centered learning, closing achievement gaps, leading diversity and social justice learning opportunities, and employing data-informed decision-making in their instruction. As an Achieving the Dream institution, the college is part of a network of more than 220 colleges, each committed to helping students achieve their college and career goals. * Teach students about the Puget Sound Naval Shipyard, including organizational guiding principles, safety programs, navigation aboard navy vessels, fundamental ship terminology and paperwork, and tools of the trade. * Identify individual learning needs of students and make appropriate adjustments in learning environments and activities. * Utilize a variety of assessment activities to evaluate student learning and achievement. Minimum Qualifications * Working knowledge of the PSNS organizational guiding principles and structure, current safety regulations, navigation aboard navy vessels, fundamental ship terminology, and tools of the trade. * Associate Degree in Industrial Trades or a related field Desired Qualifications * Experience as a PSNS trade journeyman * Bachelor's Degree Successful Applicants Will * Foster a climate of multi-cultural understanding and appreciation * Success working with individuals and groups representing a wide range of diverse cultural, geographic, and socioeconomic backgrounds * Effective verbal and written communication skills * Communicate promptly with students, faculty, and staff * Function as a team player * Establish and maintain effective working relationships * An understanding of and commitment to the Olympic College mission, diversity, and a learning-centered climate * Uphold Olympic College's values and ethics necessary to maintain a positive climate Please note that we are unable to sponsor visas for this position. Only candidates who are currently authorized to work in the United States will be considered. Faculty members must submit official, unopened transcripts to the Human Resources department within 30 days of their employment. Final salary contract will be determined based on educational qualifications and applicable credits. This is an adjunct faculty position contracted on a quarterly basis. Placement on the faculty salary schedule will be commensurate with educational background and experience. The salary listed is a range based on per quarter. A collective bargaining agreement exists, and this position is covered by the Association for Higher Education (AHE). Flexibility is required to meet the needs of the department. Evening and/or weekend classes, instruction at satellite Olympic College campuses, and off-campus assignments including travel to clinical sites may be a part of the instructional load. Adjunct positions at the college are open continuously and reviewed on a quarter-by-quarter basis. Individuals who apply to the applicant pool are considered active for a period of 12 months from the application date and may be contacted when vacancies occur. Applying does not guarantee that a position will be available or offered. Adjuncts are not eligible for benefits upon their initialhire,Adjunct faculty must work 50 percent of a full-time load for two consecutive quarters to become eligible. Additional hours earned at other SBCTC colleges may count towards this requirement. The list of benefits that may be available after is as follows. Deferred Compensation Program (DRS) retirement savings plan; TIAA supplemental retirement savings plan, sick leave, Aflac, space available tuition waiver, Employee Assistance Program (EAP), fitness center, reduced rate and priority consideration on-site childcare on a space available. For more information regarding benefits, please visit our website here. Conditions of Employment * Prior to a new hire, a background check including criminal record history will be conducted. Information from the background check will not necessarily preclude employment but will be considered in determining the applicant's suitability and competence to perform in the position. In addition to the background check, candidates will be required to complete the Sexual Misconduct Disclosure Form as required WB HB 2327. * The employee must reside in Washington State and within a reasonable distance of the campus to respond to workplace reporting requirements at the time of hiring. Frequent travel to Olympic College campuses or other sites may occur. How To Apply To be considered for this position a candidate must apply online through the Olympic College website and submit the following required materials: * Olympic College Online Application * Resume * Cover Letter - in your cover letter describe how your experience sets you apart for this position. * Unofficial college transcripts. Official transcripts and copies of mandated certifications will be required of the successful candidate. EEO Statement Olympic College provides reasonable accommodations for qualified students, employees, and applicants with disabilities in accordance with the Americans with Disabilities Act and Federal Rehabilitation Act. Accommodation inquiries can be sent to: ********************. This recruitment announcement does not reflect the entire job description and can be changed or modified without notice.

Type of Work: Commercial, Industrial, and Residential multi-family projects. Work consisting of rough-in through trim out. Requirements: * No experience necessary (1+ years of construction electrician experience preferred) * Current driver's license and good driving record General Requirements: * Solid work ethic, team player attitude, and problem solving ability * Own & have ability to use personal hand tools * Ability to work overhead * Ability to work at heights * Ability to lift 50+ pounds * Ability to work indoors, outdoors, and occasionally in inclement weather * Ability to safety use and climb ladders Full-time Benefits: * Health/Dental/Vision/Life insurances * Over 2 weeks paid time off * 401(k) with company match * Clothing & tool allowance * Paid holidays

Do you love working with your hands? Are you interested in construction and in becoming an electrician? Then the electrical apprentice position could be perfect for you! Electrical apprentices are able to earn a paycheck while learning the trade through firsthand experience. This position has a clear career path to becoming an electrician with the potential and opportunity to become a manager of a team and larger scope of work. Position Responsibilities The electrical apprentice is partnered with a licensed journeyman electrician and has on-the-job training (OJT) to become an electrician. You'll help perform electrical installations of a multifamily and commercial nature. Learn and perform all scopes of large-scale projects, from distribution to rough in, trim and deck work. Participate in official apprenticeship program and attend classes as required. Here's What We're Looking For Motivated individuals who want to learn the electrical trade and have a high school diploma or GED as well as reliable transportation. Successfully register, enroll and participate in an electrical apprenticeship program (and remain in good standing) until program is completed. Able to physically perform the essential functions of the job. Willing to learn electrical codes and other construction safety requirements. Demonstrate and uphold Power Design's core values, which include integrity, accountability, teamwork, innovation, and growth Benefits and Perks Competitive salaries offered Exciting, award-winning workplace culture focused on employee appreciation, recognition, and fun Comprehensive medical, dental, vision, and life insurance offered Short and long-term disability plans 401k with company matching and Flexible Spending Accounts (FSA) options available Paid time off and company holidays provided Discounts to a variety of services, mental and physical wellness resources, free Care.com memberships, and other perks given to all Power Design team members Diversity and Inclusion At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop, and retain the most talented people from a diverse candidate pool nationwide. About Us Power Design is a National Design Build Contractor, focused on innovative construction across multiple trades: electrical, mechanical, plumbing, and systems technologies. Since 1989, we've disrupted the industry by putting next-generation ideas to powerful, practical use because we care. We design breakthrough solutions that push the limits of what's possible by harnessing the collaborative power of our teams to elevate experiences and empower the communities where we live and work. In an industry that tends to look back, we're building better by staying grounded in our values, dedicated to our unique culture, and supportive of work-life balance - making us built to last. By investing in our people and doing things differently, we're designing what's next. To learn more, visit ********************** At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool nationwide. This position is designated as a Safety Sensitive position and is subject to mandatory pre-employment and periodic criminal background checks and traffic records checks (as applicable). This position is also subject to mandatory pre-employment and random drug and alcohol testing which may include post- accident screening. In this position, you may be disqualified from employment based on the presence of marijuana in test results, even if you possess a medical card authorizing the use of medical marijuana.

Job Responsibilities: Assists one or more workers in the skilled maintenance trades by performing specific or general duties of lesser skill cleaning working area, machine, and equipment; assisting journeyman by holding materials or tools; and performing other unskilled tasks as directed by journeyman. In some trades the helper is confined to supplying, lifting and in others the worker is permitted to perform specialized machine operations, or parts of a trade that are also performed by workers on a full-time basis. Assist with cable removal; cable installation; MCT's (multi-cable transits); lagging and painting Candidates will be required to have or obtain personal tools such as: 9/16" wrenches, 7/16 wrench, 8" crescent wrench, tin snips, needle nose pliers, channel locks, screw drivers, gloves, etc. Experience using basic hand tools such as sawzalls, drills; grinders; etc. not required but a plus Transports materials; tools; and equipment to and within work sites as required. Participates in special projects as required. Education: Requires a High School Diploma or GED. Qualifications: Requires 1 - 3 years of experience. Ability to perform general maintenance tasks. Ability to follow written and verbal instructions. Must be able to obtain a DBIDS Badge for access to Naval Bases, Naval Facilities, and private shipyards (BAE, NASSCO, etc.) Must be an US Citizen. Previous experience with Electrical is required Previous experience as a helpers and/or cable installer certification preferred Background in electrician work/apprenticeship preferred Ameri-Force Benefits As part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: · Industry Leading Pay · Medical Coverage · Dental Coverage · Vision Coverage · Short Term Disability Benefits · Term Life Benefits

*** SIGN-ON BONUS OF $400 AFTER 90 DAYS OF EMPLOYMENT *** Is it possible to find long-term employment with an employer who is willing to pay for your training and provide you with the opportunity to make up to $28.00 per/hr painting? We think so - especially if your values match ours. Our offer is without the gimmicky and or false advertising claims that have you making far less than what was promised (very common for our industry). This is our seventeenth year of business - the secret to our success is people! Does this sound familiar? You like to work with your hands; in fact, others have noticed you have a knack for it. You also like the feeling of accomplishment; it's the end of the day and things look definitely different than they did that morning. One of your favorite parts of the day, hearing the oohs and ahhs as the client walked in the door. Your family and friends are an important part of your life, weekends and evenings off are something you value. Our values have us starting with the word Communication; it's vital for a great working environment. Integrity; this the foundation of trust. Our clients trust us with one of their largest assets; their home. Excellence; anyone with a bucket and brush can 'paint' - we are teaching and leading with industry standards, well because we take pride in our craft. Service; begins with us serving our team, then because your needs were met you take delight in creating a 'wow' experience with the customer. *** SIGN-ON BONUS $400 AFTER 90 DAYS OF EMPLOYMENT *** Starting Pay of $15.50 per/hr for qualified applicants. Up to $28.00 per/hr for the project manager who leads well with a monthly pay-for-performance bonus plan available for leaders. We are passionate about promoting from within. Management roles are available beyond this point. Inquire if the above made you excited and the below had you nodding your head in agreement. - You want to have paid time off for vacations, sick and holidays - You want to have paid training - You want to have opportunities for advancement - You would pursue formal education, but you watch your friends buried in student loans and without jobs - you are looking for another option. - You possess a valid driver's license - You possess proof to legally work in the United States (must be 18 years or older to apply) - You expect to be paid time and a half for overtime - You don't want to be treated as a subcontractor - You've been trained for prep, but not allowed to advance - because they would have to pay you more. Tell us about your work experience and come work for the best (4 Seasons Color has been voted "Best of the Best" for nine years). *** SIGN-ON BONUS $400 AFTER 90 DAYS OF EMPLOYMENT *** In connection with my application for employment and as a condition of continuing employment, I understand that investigative background inquiries may be made on me including previous employers, schools, consumer credit, criminal convictions, motor vehicles, and other reports. I understand that investigative background inquiries may be made on me including previous employers, schools, consumer credit, criminal convictions, motor vehicles, and other reports. These reports will include information as to my character, work habits, performance, education, compensation, and experience along with reasons for termination of employment from previous employers. Furthermore, I understand that the company may be requesting information from various federal, state, and other agencies which maintain records concerning my past activities relating to my driving, credit, criminal, civil, and other experiences as well as claims involving me in the files of insurance companies. I authorize without reservation, any party or agency contacted to furnish the above-mentioned information and release all parties involved from liability and responsibility for doing so. I hereby consent to obtain the above information from 4 Seasons Color, Inc., and/or any of their agents. This authorization and consent shall be valid in original, fax, or copy form. All applications will be kept on file for ninety (90) days. All hiring and employment at 4 Seasons Color, Inc. is at will. I understand this application is not an employment contract, nor can it be used to create one. Employment by 4 Seasons Color, Inc. has no specific term and may be terminated by the employee or 4 Seasons Color, Inc. with or without notice. I acknowledge that 4 Seasons Color, Inc. has not made any promises or representations that differ from those contained in this paragraph. I understand, that if hired, I must provide satisfactory documents within 3 days to establish my identity and right to work in the United States, if I am offered a position with 4 Seasons Color, Inc., and that failure to provide this evidence will result in the termination of my employment. I release and agree to hold harmless any individual, company, business institution or government agency from all liability with regard to furnishing information to 4 Seasons Color, Inc. I agree to release and hold harmless 4 Seasons Color, Inc. from all liability with respect to the receipt of such information. I certify that the information I have furnished on this application form is true and complete. I understand that if any misrepresentation has been made by me verbally or in writing, any offer of employment made to me may be withdrawn or my subsequent employment with 4 Seasons Color, Inc. may be terminated.

Temp Madden Industrial Craftsmen is a well-established staffing company with clients throughout the Pacific North West assisting them to fill their positions. We are looking for reliable, hardworking, Entry Level Apprentice Carpenters who have 1 year construction experience in the Kent and Renton area.This role may have you performing the following: site demolition, framing, dry wall and sheet rock installation, cabinet making and installations, window and door framing, stair customizations, crown molding, and baseboard installations. *These are temporary assignments based on the needs of our clients *Rate of Pay $25-$26 Requirements: Must have tool bag and basic hand tools Must be 18 years or older Reliable Transportation,(must be able to drive to clients sites) Lift up to 50 pounds Work Boots Benefits: $25-$26 401(k) Flexible schedule Health insurance Paid time off Referral program #zr

J-Chavez Design Build is seeking a hardworking and enthusiastic individual to join our team as an Apprentice Carpenter. As an apprentice, you will have the opportunity to work alongside our experienced carpenters and learn the skills and techniques of the trade. The successful candidate will have a passion for construction and a strong work ethic, with a desire to grow and develop within our company. Responsibilities: - Assist in the construction of residential and commercial projects under the supervision of a journeyman carpenter - Learn how to read and interpret blueprints and building plans - Measure, cut, and shape various building materials - Install and level building structures, including framing, flooring, and walls - Collaborate with team members to ensure projects are completed efficiently and on time - Maintain a clean and organized work site - Adhere to all safety protocols and regulations on site Requirements: - High school diploma or equivalent - Prior experience in construction or a related field is preferred but not required - Ability to use hand and power tools safely and effectively - Basic understanding of building codes and regulations - Physically fit and able to lift heavy materials and work in various weather conditions - Capable of working independently and as part of a team - Strong communication and time-management skills - Willingness to learn and take on new challenges - Valid driver's license and reliable transportation - Clean driving record Benefits: - Competitive salary and opportunities for growth within the company - Hands-on learning experience in a professional and supportive environment - Chance to work on a variety of projects and gain diverse skills - Potential for certification and specialized training courses - Paid time off and holiday pay - Health insurance options - Employee discount on company services If you have a keen interest in carpentry and are ready to jump start your career, then we want to hear from you! Apply now to become our next Apprentice Carpenter and be a part of our growing team at J-Chavez Design Buil

Job Description HELP WANTED CARLSON ROOFING COMPANY INC. of Hillsboro/Portland Oregon is seeking a roofer! That's right Carlson Roofing is looking for a new apprentice roofer. Don't let our extensive track record and sterling reputation lead you to believe we are coasting. We have a young and dynamic management team with a burning desire to continue to capture market share in the beautiful Pacific Northwest. As an apprentice roofer at Carlson Roofing Company you will find projects set up and ready to go, including Union wages and benefits (full family healthcare, generous Union Pension). We are growing in a calculated manner always keeping the bottom line our top financial priority and sharing success with our team. It's no cake walk here. It is often fast paced and intense, but you'll never be bored. If this sounds interesting to you, If you are a professional, a team player, a goal setter who can take the heat but still have fun and share some laughs in a competitive environment then apply at Carlson Roofing Company today!!! I look forward to hearing from you. All the Best. Greg Requirements General Roofing skills and requirements: Perform work in accordance with job specifications and safety regulations Be reliable with Strong Work Ethic. Able to lift, carry and move items weighing under 100 lb. frequently Mobility to stand, bend and kneel repeatedly or for extended periods of time Ability to climb ladders frequently and work on elevated roof surfaces Interact professionally and work well with owners, customers, co-workers, Managers, inter-office personnel, etc. Adaptable to constantly changing environments and work places Ability to work outdoors in extreme weather conditions, both hot or cold Make proper use of appropriate tools and equipment that require extensive use of the hands. Complete required daily paperwork, such as Purchase Orders, Work Orders, Timesheets, etc. Remove old roofs, install underlayment and install new roofs Perform repairs as indicated to leaking roofs. Install composition shingles, slate shingles, roofing tiles, and flashings. Install low slope roof systems including hot asphalt, torch down, and single ply. Erect necessary rigging. Install insulation or vapor barriers. Cut materials to fit corners and against walls. Replace damaged joists and plywood. Willing to train the right person! Benefits Raise every 500 hours worked! (Once an indentured apprentice if all requirements are met.) CDL drivers get $1 extra per hour worked! FREE Health Insurance - covers: Spouse. ALL children up to 26 yrs old (as many as you have), ANY legally adopted stepchildren FREE Pension plans (Vested after 5 years) NRIPP You get up to $1.20 per hour worked NRIPP Supplemental You get up to $1.45 per hour worked PCP You get up to $5.20 per hour worked *Total up to $7.85 per hour worked = up to $326,560.00 in 15 years $5,000 Death Benefit Closed Union - Protected by UNEMPLOYMENT If you are ever simply out of work, you'll be offered another job or can collect unemployment. Includes days spent in training! FREE COLLEGE DEGREE Apprentices get college credit towards their A.S. in Applied Science Degree. Must attend at least 3-4 weeks of classes a year within the first 4 years in the program.

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Employee discounts Health insurance Paid time off Vision insurance About Us: Closets by Design Seattle North is one of the fastest growing businesses in the Pacific Northwest, specializing in customized storage solutions tailored to our customers' needs. Our commitment to quality craftsmanship and exceptional customer service has earned us a loyal clientele, making us a top choice for home organization. Our employees enjoy a supportive work environment with opportunities for growth and development in a thriving industry. About the Role: Installers and Install Apprentices are responsible for the installation of our organization products in a safe, high quality, productive, and profitable fashion. This exciting opportunity allows you to work hands-on with custom designs, bringing creativity and organization into our clients' spaces while learning from industry professionals. No Experience? WE WILL TRAIN YOU! All tools provided. Responsibilities: Assist in the installation of custom closets, cabinetry, and organizational systems. Follow project plans and specifications to ensure high-quality installations. Utilize hand tools and power tools safely and effectively. Maintain a clean and organized work environment during and after installations. Communicate with team members to provide updates on project progress. Learn and apply best practices in installation techniques and customer service. Help with loading/unloading materials. Requirements: Previous experience in carpentry or installation preferred but not required. Use of hand tools such as screwdriver, drill, and table saw Strong attention to detail and commitment to quality workmanship. Ability to lift heavy materials and work in various environments. Excellent communication skills and a positive attitude. Valid driver's license and reliable transportation. Willingness to learn and grow within the company. Basic math skills and ability to read measurements accurately.