Computer aided design designer jobs in Canton, OH - 68 jobs

Cooperidge Consulting Firm is seeking a Civil/Structural Designer I for a top Engineering & Design-Build client in Akron, OH. This role provides critical support to engineering project teams through design drafting, 3D modeling, and field data collection. The Designer will utilize modern CAD and BIM tools to develop layouts for foundations, framing, and site-related features within industrial environments. This is a hybrid-eligible role (after initial training) designed for a detail-oriented professional eager to master cutting-edge technologies like laser scanning and GPS surveying while working within a highly supportive and mentored team culture. Job Responsibilities Drafting & Design: Support engineering teams by creating detailed civil and structural design layouts using AutoCAD, Civil 3D, Revit, and Navisworks. Modeling & Layout: Assist in developing foundations, structural framing, and site-specific features that comply with applicable codes and constructability standards. Field Data Collection: Travel to client sites to collect measurements, elevations, and interpret existing field conditions for accurate model development. Technical Learning: Actively learn and apply modern methodologies, including BIM, laser scanning, and GPS surveying. Multidisciplinary Coordination: Collaborate across disciplines to ensure well-coordinated project outcomes and deliverables. Quality Control: Maintain rigorous accuracy in all drawings, identifying and correcting design discrepancies early in the process. Safety: Navigate industrial facilities safely during field visits and promote a culture of safety in all drafting and field activities. Requirements Education Vocational or Associate's degree in Computer-Aided Drafting & Design (CADD) or a related field (or equivalent professional experience). Experience Minimum of two (2) to five (5) years of drafting experience in civil or structural design. Newer graduates with strong internship experience are encouraged to apply. Proven experience working on-site and the ability to maneuver through industrial facilities. Skills & Requirements Software: Working knowledge of AutoCAD is required; familiarity with Revit, Civil 3D, or Navisworks is a significant plus. Technical: Ability to learn and operate specialized field equipment and new software tools. Compliance: Valid driver's license and the ability to pass a background screening and drug test. Soft Skills: Strong attention to detail, teamwork, and organizational skills. Benefits Comprehensive health, vision, and dental insurance plans Life insurance coverage 401(k) retirement plan with company matching contributions Paid time off including vacation, sick leave, and holidays Opportunities for career growth and advancement

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons is seeking an amazingly talented CAD Detailer/Designer for our rapidly expanding portfolio of projects throughout Ohio and surrounding regions alongside our Cincinnati and Akron teams. This role is ideally suited for someone who is looking to grow or advance their career in bridge detailing and design. In this role you will develop working drawings from specifications, engineering notes, sketches, and/or detailed drawings for bridges, ensuring that they meet company and industry standards and codes. What You'll Be Doing: * Utilizes Microstation/AutoCAD to develop engineering drawings consisting of standard arrangements, layouts, details, isometrics, etc., from rough sketches and/or from general engineering and design information according to established standards and procedures * Works closely with other Designer/Detailers and Engineers to ensure a coordinated design * Applies standard design/detailing/drafting principles and theories to complete assignments * Utilizes technical manuals to ensure compliance with company policies and applicable state (ODOT) standards and codes (e.g. State level Bridge Design Manuals and Standard Drawings) * Ensures compliance with required design safety factors, tolerances, and specifications * Compiles data and performs dimensional and routine calculations required for the preparation of drawings * Reads and understands orthographic (2D) and/or isometric (3D) designs and supplier/manufacturer drawings * Makes required changes, additions, and/or revisions, as directed by immediate supervisor What Qualifications You Bring: * High School Diploma or equivalent is required; 2 year degree/certificate is preferred * Prior relevant infrastructure and/or transportation design experience required (2+ years) * Experience in Microstation design/detailing/drafting is preferred with experience with AutoCAD a plus * Ability to interpret and ensure conformance to applicable standards and guidelines, as well as company policies and procedures * Understanding of Reinforcing steel calculations and development of Reinforcing Schedules is preferred Security Clearance Requirement: None This position is part of our Critical Infrastructure team. For more than 80 years, our experts have designed and delivered the critical infrastructure that connects and protects communities around the world. We work in collaborative teams, both within the company and with our partners and customers, to plan, design, build, and modernize infrastructure. We take special pride in projects and solutions that improve communities as well as people's quality of life by promoting economic growth, enhancing mobility, and increasing sustainability and resiliency. Powered by our people, we provide the imagination necessary to support our customers' visions-and to help them see what's next! Salary Range: $21.88 - $38.27 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to ************************************************

Job Description In the CAD Designer role, you will play a crucial part in the design and development of machinery, working closely with engineers and architects to create innovative solutions. You will be responsible for preparing detailed calculations, developing technical drawings, and ensuring designs meet company and client standards. Your expertise will support the building and installation process, contributing to the efficiency and effectiveness of our manufacturing processes. If you have a passion for mechanical design and a commitment to excellence, we would love to hear from you. Responsibilities: Prepare calculations for proposed machinery after completing technical drawings. Develop sketches and designs using input from engineers and architects. Calculate factors such as tolerance and dimensions. Create designs in compliance with company procedures, regulations, and client standards. Submit drawings to upper management and engineering teams for review. Utilize customer feedback and data to upgrade, improve, or repair existing machinery. Provide support during the building and installation process, ensuring proper adherence to design specifications. Finalize designs and send prints to the production department. Qualifications: 3+ years of experience in an engineering design role or related field. Exceptional written and verbal communication skills. Excellent problem-solving abilities. Proficient in SolidWorks (CSWE certification is a plus),Inventor and AutoCAD. Strong computer and mathematical skills. Experience with weldment design is advantageous. Familiarity with electronics, robotics, and metals is a plus. Flexible approach to work and ability to adapt to change. Capable of working effectively in a team environment. Self-motivated with the ability to use initiative. Physical Requirements: Ability to sit or stand for extended periods while working on computer systems. Capability to lift and carry objects up to 25 pounds, such as equipment or design materials. Dexterity to handle drafting tools and equipment. Ability to work in a standard office environment and occasionally visit manufacturing or construction sites. Vision abilities required include close vision and the ability to adjust focus for detailed drawing work. About Us: At Seifert Engineering, our team of electrical and mechanical engineers and designers is experienced in diverse industries and applications, dedicated to maximizing resources and enhancing manufacturing processes. We serve industries such as automotive, tire and rubber, steel mill, pulp and paper, utilities, refining, plastics, and food processing. Our collaborative approach ensures continuous improvement and efficient product delivery. We are committed to staying current with the latest CAD software, including SolidWorks Professional, Autodesk Inventor Product Design & Manufacturing Collection, Creo Parametric, AutoCAD Mechanical, AutoCAD Electrical, and NX. With over 35 CAD terminals and a broad customer base, we focus on 3D part modeling, parametric design, automated tooling, and product development. EEO Statement: Our company is an equal opportunity employer. We provide equal employment opportunities to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

Steel Equipment Specialists is a leading player in the steel equipment manufacturing and engineering industry, committed to delivering top-quality products and services to our clients. With a strong dedication to creative design, industrial application lifespan, and delivering innovative solutions to our customers, we have an immediate opening for a self-motivated and detail-oriented Project Design Engineer with a desire to learn and grow in a dynamic department. • Willing and capable of working in an engineering team environment.• Familiarity with hydraulic systems is systems is a plus.• Communication is important and should be comfortable with written and verbal communication among other team members.• Willing to work in a fast paced environment that is customer focused.• Highly motivated and is capable to develop novel solutions for our customer's needs.• Able to perform machinery design calculations.• Familiarity with Autodesk Inventor design software and AutoCad is preferred.• Finite Element Analysis and project management skills are a plus. Required Education and ExperienceA minimum of a 2 year associates mechanical technology degree. Minimum 5 years machine design experience, preferably in the metals industry on heavy equipment. Joining our team means being part of a company that values its employees and has a great culture to build your career in. With a supportive work environment, we strive to create a workplace where you can thrive professionally and personally. Benefits Steel Equipment Specialists actively benchmarks our employee positions to confirm we offer the most competitive of salaries and accurately scales commensurate with experience. Comprehensive health, dental, and vision insurance with Anthem Blue Cross Blue Shield and Health Savings Account with company contributions 401(k) retirement plan with excellent company match Generous paid time off and holiday schedule Professional development opportunities Student Loan reimbursement opportunities to maximize earnings Sign on bonus as well as referral program, and multiple potentials for increases each year Steel Equipment Specialists, LLC is an equal opportunity employer. Join our team and help us maintain our commitment to safety excellence in the steel manufacturing and engineering industry! Your expertise and dedication will make a significant impact on our organization and contribute to the growth of our business, our employees, and our community.

Looking for a familia? At LUZCO, we're more than an engineering firm. We're a tight-knit team of people who care deeply about what we do and who we work with. As an award-winning, woman-owned, minority-owned boutique engineering firm, we've built a reputation for delivering world-class work while creating a culture that feels like home. We're proud to be a place where you can bring your authentic self to work every day and feel supported doing it. We're proud to be recognized as a 2025 Best Place to Work in St. Louis, a reflection of our people-first mindset and our belief that work should be both challenging and fulfilling. Our mission is simple: to provide innovative engineering solutions while building genuine, lasting connections with our clients and each other. Why You'll Love LUZCO Benefits that take care of you: Top-notch medical, dental, and vision insurance; a competitive 401k match; generous PTO; student loan repayment assistance; and an employee recognition platform that celebrates your wins big and small. Flexibility that fits your life: We get that life doesn't always stick to a schedule. You'll work with your supervisor to create a schedule that's flexible and works for both you and the team. Diversity that fuels innovation: Our team brings together a wide range of backgrounds, perspectives, and experiences. That diversity isn't just something we talk about; it's what drives our creativity and helps us find better ways to solve problems. Growth that feels personal: Whether you're continuing your education, earning new certifications, or stepping into new challenges, we're here to help you grow in the direction that's right for you. You'll collaborate with experienced mentors and leaders who want to see you succeed. A culture that gives back: We're passionate about our communities. Every year, we dedicate paid time off for volunteering and encourage our team to use their talents to make a difference whether that's mentoring students, serving local nonprofits, or getting hands-on in community projects. A workplace that feels like you: We keep things relaxed and welcoming. Expect weekly happy hours, team lunches, a stocked kitchen, dogs in the office, and a casual dress code. It's a space where you can be yourself and do your best work. The Role We're looking for a detail-oriented Outage Sequencing Drafter to join our team! In this role, you'll bring construction plans to life through precise CAD drawings that support outage sequencing and planning efforts. You'll work closely with our Construction and Outage Planning teams to ensure drawings align with project goals, safety standards, and scheduling needs. What Your Day Will Look Like: Create accurate CAD drawings that reflect both pre-outage and outage phases of construction. Collaborate with the Construction & Outage Planning team to ensure alignment between drawings, schedules, and sequencing principles. Update and revise CAD documents as outage plans evolve, maintaining accuracy and version control. Identify potential constructability challenges during drafting and communicate them to the team for resolution. Support resource planning and equipment layouts with clear, well-organized visual documentation. Participate in review sessions, implement feedback, and ensure final drawings meet quality standards. Maintain organized CAD files and ensure they are accessible to project teams. What You'll Bring to the Familia:Essentials to Succeed: Associate's degree in Drafting, Engineering Technology, Construction Management, or a related field; or 3-5 years of relevant drafting experience. Proficiency in CAD software (AutoCAD, Revit, or similar tools) with a strong understanding of drafting standards. Experience in construction or engineering documentation, with high attention to detail and accuracy. Understanding of construction processes, outage sequencing, and resource allocation. Strong communication and collaboration skills, with the ability to work cross-functionally. Highly organized and able to manage multiple projects and deadlines. Proficiency in Microsoft Office (Excel, Word, PowerPoint). What Sets You Apart: Experience with 3D modeling and advanced CAD techniques. Familiarity with project scheduling or resource management tools (MS Project, Primavera). Knowledge of construction safety protocols and outage planning best practices. Experience working within outage or industrial construction environments. Ready to make an impact? We know you might not check every single box on the job description-and that's totally fine. At LUZCO, we care about potential, collaboration, and diverse perspectives. If you're passionate about joining a supportive and innovative team, we encourage you to apply and show us what you can bring to the familia. Powered by JazzHR aSPdAYyGKW

Job Description About the Role: As a Designer Drafter in Avtron's New Product Development team, you will play a critical role in transforming conceptual designs into detailed product designs. You will collaborate closely with engineers, and other project team members to deliver new products to the market. The role demands meticulous attention to detail to produce clear, comprehensive documentation that meets industry standards and project requirements. Ultimately, your contributions will directly impact product quality, manufacturing efficiency, and successful project completion within the organization. DUTIES AND RESPONSIBILITIES: Essential Functions: Works with Lead Project Engineer and other project team members to transform new product ideas and requirements into a prototype or pilot design Uses 3D tools such as PTC Creo to digitally prototype, increasing speed-to-market initiatives. Develop 3D design models based on concepts, sketches or previous designs to create detailed drawings, focusing on core manufacturing capabilities. Conceptualizes sheet metal design through the use of either 2 or 3D tools ensuring tolerancing requirements are met. Propose assembly and or fabrication techniques and develop the new product's mechanical, physical and other attributes to ensure design is manufacturable at best cost. Presents, or co-presents with Lead Project Engineer model designs for technical review or design reviews, ensuring compliance with company processes Prepare comprehensive document packages for manufacturing release, including assembly drawings, Bills-of-materials and machine files Maintain drawing revision control in accordance with Avtron document control processes MINIMUM QUALIFICATIONS: Demonstrated experience developing and creating new products preferably in the electrical-mechanical products space Strong understanding of Bill of Materials (BOM) preparation and management. Ability to interpret engineering sketches and technical specifications accurately. Minimum 8 years of experience in related role Strong knowledge of safety protocols, quality control, and manufacturing processes Excellent communication and interpersonal skills Detail-oriented with strong organizational and problem-solving skills Experience designing to UL, CSA, NEC, and other safety agency requirements would be a plus. EDUCATION, SKILLS AND EXPERIENCE: Education: BS in Engineering or Computer Aided Design (CAD) preferred, Associate Degree in Engineering or CAD required. Experience in both 2D and 3D modeling software Strong communication and presentation skills, verbal and written Experience: Knowledge of materials and fabrication techniques relevant to manufacturing. Strong communication skills to effectively collaborate with cross-functional teams. Prior experience working in a fast-paced manufacturing setting with tight deadlines. Skills: Knowledge of materials and fabrication techniques relevant to manufacturing. Strong communication skills to effectively collaborate with cross-functional teams. Drawing expertise to ensure that all drawings are production-ready and compliant with industry standards. 3D modeling and knowledge of manufacturing processes

For description, visit PDF: ********************* com/wp-content/uploads/2024/03/Design-Draftsman. pdf

SummaryWe are seeking a detail-oriented Mechanical Drafter with strong AutoCAD experience to support the design and documentation of piping systems and mechanical equipment.. This role involves creating accurate technical drawings for fabrication, installation, and maintenance of machinery and piping systems. Responsibilities* Create and update mechanical drawings under the guidance of engineers.* Assist with piping layouts, schematics, and basic isometric drawings* Support preparation of machine and equipment drawings* Revise drawings based on markups, redlines, and engineering input Qualifications* Associate degree, technical diploma in Mechanical drafting, engineering technology, or related field.* Ability to read engineering sketches and specifications* Strong attention to detail and willingness to learn* Good communication and organizational skills

Consider joining the Pennex family as a CAD Drafter at our Leetonia, OH location. This role is responsible for using specialized software to create precise and detailed technical drawings and plans for various industries, including engineering, manufacturing, and floor plans. The primary role is to convert conceptual designs, rough sketches, and engineering specifications into accurate and dimensionally precise drawings. Responsibilities Drafting and Design: CAD Drafters are responsible for creating precise and accurate technical drawings, schematics, and plans based on the specifications provided by engineers or designers. This position uses CAD software to convert conceptual ideas and rough sketches into detailed, dimensionally accurate drawings. Interpretation: Needs to understand and interpret engineering drawings, as well as written specifications and design standards. They must ensure that their drawings comply with industry standards and regulations. Collaboration: Works closely with engineers, project managers, and other professionals to refine and modify drawings to meet project requirements. Effective communication and teamwork are essential in this role. Documentation: Creates and maintains detailed documentation of drawings and revisions. This documentation is crucial for project records, quality control, and future reference. Problem-Solving: Identifies and resolves design and drafting issues that arise during the project, ensuring that drawings are both technically feasible and functional. Software Proficiency: Proficient in using CAD software tools such as AutoCAD, SolidWorks, or other industry-specific software programs. Quality Control: Verifies the accuracy and completeness of their drawings, ensuring that all dimensions, scale, and notations are correct. Updates and Revisions: Makes revisions to drawings as project requirements change or errors are discovered. They must manage and maintain updated versions of drawings. Compliance: Ensures that all drawings comply with relevant codes, industry standards, and regulations. Other duties as assigned. Qualifications Education and Experience: Required: High School Diploma or equivalent Desired: Associate's Degree in Drafting or Related Field 2 years of experience in CAD Drafting Required Skills/Abilities: Proficiency in CAD software is essential. Familiarity with AutoCAD for floor plans or SolidWorks for mechanical design preferred. Effective communication skills are important for collaborating with team members and engineers. The ability to identify and resolve design and drafting issues is crucial. A desire to work in a fast-paced, hands-on manufacturing environment Highly motivated, self-driven, and eager to learn and apply new skills Attentive to details and follows through on assigned tasks and commitments Flexible and driven to meet tight deadlines, handle multiple projects and prioritize them appropriately Strong organizational skills, and ability to effectively disseminate information in a clear and concise manner Must be able to pass pre-employment physical and drug screen Must be eligible to work in the United States, visa sponsorships are not available; OPT/CPT is not eligible for this role Regular attendance About Us Perks of the Job: Medical, dental and vision insurance Disability and life insurance 401(k) with matching contribution Generous allotment of paid vacation and paid holidays Competitive wages plus performance-based bonus opportunities Employee Assistance Program (EAP) Ongoing training and professional development Ample opportunity for career growth and advancement Daily pay available Why Our People Love Working Here: Purpose-driven, friendly, open, and respectful culture Shared core values of safety, integrity, caring, and growth Tuition reimbursement Employee discount program with hundreds of partner brands Wellness incentive program Regular employee celebrations and events Who We Are: Founded nearly half a century ago, Pennex continues to see rapid growth as a leading provider of quality aluminum cast products and extrusions. With state-of-the-art technology and facilities across Ohio and Pennsylvania, we're proud to offer the capabilities and expertise to cast billet, extrude custom shapes and fabricate finished components for customers across a range of markets - including automotive, transportation, building and construction, electrical and machinery, consumer durables and distribution. But it's not just what we do that sets us apart, it's how we do it. Safety. Integrity. Caring. Growth. These core values are embodied by each member of our team; guiding every action we take and decision we make. Whether it's driving innovation within our industry, making the impossible possible for our customers, providing a safe, respectful workplace for employees or supporting our local communities, our purpose is clear. We are dedicated to impacting our world in a positive way. If you are a like-minded individual with a strong ability to problem solve, collaborate and effectively communicate, Pennex may be the perfect place for you to grow your career. To learn more, please visit Pennex.com or check out other opportunities within the MX Holdings family of companies at MXHoldings.com. Our Commitment to Inclusion: We welcome people of different backgrounds, abilities, and perspectives. To ensure our business and culture continue to be inclusive of all people, we never discriminate based on race, religion, national origin, gender identity or expression, sexual orientation, age or marital status, veteran, or disability status. MX Holdings and our family of brands, including Metal Exchange and Pennex, are proud to be equal opportunity employers. Additionally, all your information will be kept confidential according to EEO guidelines. Should you have any questions or require special assistance completing your application, please email **************************. Qualified Applicants must be legally authorized for employment in the United States and not require employer sponsored work authorization now or in the future for employment in the United States. Our salary ranges are primarily determined by role, level, and location. The range provided for each job posting reflects the minimum and maximum target salaries for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Confidentiality Agreement Required: Yes Posted Min Pay Rate USD $1.00/Hr. Posted Max Pay Rate USD $1.00/Hr.

Summary: We are looking for an Electrical Designer/Drafter to work on-site at a client facility in Canton, OH. The Electrical Designer/Drafter will assist with the development, design, and drafting of 3D CAD-based electrical drawings. This is a permanent, direct hire position. Candidates for this position should have large-scale plant and industrial chemical experience. This is an ON-SITE position and remote candidates cannot be considered. Qualifications: To perform this job successfully, you must be able to accomplish each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Upon request, reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Education/Experience/Key Responsibilities: 5+ years relevant work experience, specifically with industrial CAD design Assist with preparation of engineering drawings for all construction and fabrication work including detailed drawings, as-builts, schematics, and flow diagrams, one lines/schematics, electrical/instrumentation Work with engineers in order to determine electrical specifications and specialty items Provide drawing production work including problem analysis, design layout, and calculations Work under the direction of a Lead Designer and provide advanced Microstation drafting and design services by preparing and maintaining electrical & instrumentation engineering drawings for use in fabrication and construction Prepare Microstation 3D designs from general instruction and/or preliminary sketches, diagrams, or schematics Assist management in verifying compliance with applicable design standards Prepare Instrument List, Manual Valve Lists, and Drawings Lists Maintain and update engineering drawing files and incorporating electrical/instrumentation changes, modifications, and new construction into existing plant drawings using AutoCAD Recommend modifications and changes for design improvement and simplification Produce complex technical drawings and electrical/instrumentation drawings Prepare working drawings from conceptual layout to detailed finished product Coordinate CAD projects with other discipline personnel Maintain P&IDs, One Lines/Schematics, and other construction blue print Develop sketches on proposed drawings, flow sheets, and develop completed designs from sketches Work with engineering, other professionals, and SMEs in order to obtain input to recommendation Eligibility Requirements: Must be legally authorized to work in the United States without restriction Authorizes a background investigation, including verification of past employment, criminal history, and educational background Submits to a drug test post offer Possesses a valid driver's license Accepts that this position may require some domestic overnight travel Willingness to commute to office location at least 3 days per week Ability to collaborate with others in an on-site, team environment Demonstrate reliable, consistent, and punctual work-site attendance Ability to utilize the required technology such as computers, phones, and tablets to complete job duties Must be an organized, self-starter who can independently manage time effectively Have the ability to handle varying workloads and the variable stress-levels associated with said workload Ability to meet the quality and productivity standards required by the company Location: On-site in Canton, OH Job type: Direct hire, permanent Pay: $45-50/hr Chemstress Consultant Company is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. Chemstress does not discriminate in employment opportunities or practices on the basis of age, color, disability, gender identity, national origin, race, religion, sex, sexual orientation, veteran status, or any other characteristic protected by country, regional or local law. Keywords: electrical, engineer, engineering, P.E., PE. Professional Engineer, Arc Flash Studies, industrial, chemical, petrochemicals, utility, utilities, power, energy, manufacturing, EasyPower, protective relaying, short circuit studies, electrical load studies, control schematics, engineering calculations, power system equipment, switchgear, unit substations, motor control centers, drive systems, grounding systems, lighting systems, P & ID's, PFD, NFPA, NEC, AutoCAD, Revit, onsite

About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a detail-oriented experienced CAD drafter. The drafter is a professional who uses CAD software to create, edit, and modify detailed 2D and 3D drawings and designs for electrical equipment manufacturing per client specs. Job Duties: · Create engineering drawings using AutoCAD for electrical builds, modification projects, and upgrades or customization per client specs · Track assigned tasks and prioritized the completion of tasks accordingly · Maintain Company's CAD standards and templates · Learn electrical equipment and client-specific equipment and their usage · Learn panel & component design from client-specific standards and cut sheets if applicable · Learn wire sizing and design from client-specific standards and NEC · Read and analyze existing blueprints, construction drawings, and plans · Routinely produce accurate drawings promptly and efficiently · Ability to complete CAD drawings independently in a timely manner · Learn construction and design methods and best practices · Evaluate the design for constructability · Estimates material usage and additionally creates a bill of materials for design products Requirements Minimum Qualifications: · Two-year Drafting or Design, Manufacturing, Engineering or similar degree or equivalent work experience required · Two plus years of experience drafting electrical equipment in a manufacturing environment required · Proficient in MS Office Suite and AutoCAD required · Able to read one lines and schematics required · Ability to work autonomously without direct supervision required · Analytical abilities and problem-solving skills required · Excellent communication skills both written and verbal required · Growth mindset with the ability to accept challenges required · Ability to pass physical, drug, driving, and background check required · Ability to physically push, pull, and lift 50lbs or more required · Ability to sit, stand, and walk for four plus hours at a time required · Alignment with company core values required Preferred Qualifications: · Drafting or Design, Manufacturing, Engineering, or similar degree Benefits Benefits: Medical, dental, vision, HSA, term life, AD&D, STD, LTD 100% medical premium paid for by Panelmatic for the employee-only level medical coverage 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family) 401K Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided PTO and paid holidays provided Career advancement opportunities Competitive wages Family-friendly environment with average employee tenure above five years

Join a dynamic and innovative engineering team and utilize your 3D design expertise on impactful industrial projects. About the Role We are hiring a full-time Piping Designer to develop and oversee 3D piping models and drawings using AutoCAD Plant 3D. You will collaborate with engineers and contractors to deliver precise designs that align with industry standards and project specifications. Key Responsibilities Design and optimize piping layouts and drawings in AutoCAD Plant 3D Analyze P&IDs and ensure adherence to ASME standards Perform field checks, generate bills of material, and validate design accuracy Coordinate with engineers, contractors, and project teams for seamless integration Requirements Associate or Bachelor's degree in Mechanical Engineering/Design or a related field Minimum 5 years of piping design experience, including at least 2 years with AutoCAD Plant 3D Comprehensive understanding of piping codes, particularly ASME B31.3 Highly detail-oriented, collaborative team player, and proactive problem solver

Drafter (contract role) Pay: $29 to $34 hourly Hours: 8am to 4:30pm Start ASAP We are seeking a contract Drafter for our client, a metal fabrication manufacturer located in Streetsboro, OH. The Drafter will be working closely with the Engineering and Quality departments. As a Drafter, you will be responsible for: Creating inspection reports from blueprints Excellent knowledge of Solidworks and AutoCad Proficient in MS Word and Excel Proficient in Adobe and modifications of PDF documents Excellent blueprint reading and GD&T The ideal candidate for this role will have: Experience with drafting parts within the manufacturing industry Ready to take the next step? Apply now for this Drafter role in Streetsboro, OH or contact us to learn mor

Steel Equipment Specialists is a leading player in the steel equipment manufacturing and engineering industry, committed to delivering top-quality products and services to our clients. With a strong dedication to innovation, design, and commissioning, we are seeking a dynamic and experienced Automation Engineer to join our team. This position is part of the SES Electrical Engineering department in its capacity for controls hardware design of all SES engineering projects. This position will take leadership from the Chief Electrical Engineer and report directly to the Electrical Project Manager assigned to each task. Responsibilities: This position will be responsible for industrial controls systems design; under the supervision of the assigned Project Manager. Must have proven experience in PLC and AC Drive system design with any of the following hardware systems: Rockwell, Siemens, Lenze, GE Fanuc, Bosch - Rexroth, Mitsubishi, etc. Minimum Requirements: The following requirements are essential for this position: Panel design and layout, bill of materials, cable schedule, and wiring schematic capabilities are expected with this position. This designer must be able to work with minimal supervision and perform all required electrical engineering calculations associated with this type of hardware design. All designs will be done using AutoCAD Electrical. Knowledge of UL508A Standards is required (Build Practices and Component Selection). The ideal candidate will have a proven track record in engineering design as well as the ability to implement standard engineering practices and provide detailed documentation upon project completion. A minimum of 3 years of experience in a similar position is required. Some travel will be required during the hardware checkout phase of each project. The candidate may also be asked to participate in minor PLC troubleshooting and AC Drive configuration activities. Benefits - Steel Equipment Specialists actively benchmarks our employee positions to confirm we offer the most competitive of salaries and accurately scale commensurate with experience. - Comprehensive health, dental, and vision insurance with Anthem Blue Cross Blue Shield - 401(k) retirement plan with excellent company match - Generous paid time off and holiday schedule - Professional development opportunities - Student Loan reimbursement opportunities to maximize earnings - Annual Profit Sharing bonuses Steel Equipment Specialists, LLC is an equal-opportunity employer. Join our team and help us maintain our commitment to excellence in the steel manufacturing and engineering industry! Your expertise and dedication will make a significant impact on our organization and contribute to the growth of our business, our employees, and our community.

Job DescriptionTrumbull Industries, Inc., a recognized leader in the distribution of commercial/residential plumbing, industrial PVF and kitchen cabinetry, is currently seeking a Product Design Engineer for our Headquarters located in Warren, OH. Trumbull Industries has built a reputation by providing the highest level of customer service and we seek out employees that share this philosophy and excel at providing it. Key Responsibilities: Design and develop new products from concept through production, including 3D modeling, prototyping, testing, and documentation. Collaborate with cross-functional teams, including marketing, sourcing, and manufacturing, to ensure design feasibility and cost efficiency. Create and maintain detailed CAD drawings and technical specifications. Perform engineering analyses to verify design performance, materials selection, and structural integrity. Participate in product improvement initiatives to enhance quality, functionality, and aesthetics. Work with suppliers and factories to resolve design and manufacturing issues. Support tooling development, product validation, and first article inspections. Qualifications: Bachelor's degree in Mechanical Engineering, Industrial Design, or related field. 2-5 years of experience in product design or mechanical engineering (experience in [your product category, e.g., bathroom fixtures, furniture, or appliances] is a plus). Proficient in 3D CAD software (e.g., SolidWorks, Creo, or AutoCAD). Strong understanding of materials, manufacturing processes, and design for manufacturability (DFM). Excellent problem-solving, communication, and teamwork skills. Detail-oriented with the ability to manage multiple projects simultaneously. This is a full-time, salaried position including benefits. 401(k), Dental insurance, Disability insurance, Health insurance, Life insurance, Paid time off, Tuition reimbursement, Vision insurance

For nearly five decades, ZIN Technologies (ZIN) has provided integrated products and spaceflight hardware development services to NASA and Fortune 500 companies. ZIN specializes in the seamless and transparent progression between concept, detailed design, engineering, manufacturing, and operations. ZIN, with its uniquely qualified staff, and a proven track record of award winning work, delivers product development, system prototypes, and space flight hardware on time and under budget. ZIN has over 150 scientists, engineers, and technicians engaged in the development of specialized data acquisition and control systems, power converters, and optical-mechanical sy stems for aerospace and commercial applications. ZIN experience base includes competitively awarded engineering contracts from both government and commercial companies. Our scope of experience includes scientific, technical, operational, and program management, as well as the disciplines associated with large, complex space programs. ZIN Associates are talented, experienced individuals; many have advanced degrees and professional certifications that provide a wealth of knowledge and capabilities to our customers. Operating as a team, we are dedicated to supplying innovative, cost effective services and solutions. Job Description TO BE CONSIDERED, APPLY AT ************************ This position performs schematic capture, layout and implementation of design rules on PCBs of varying complexity. Prepares sketches, block diagrams, wiring diagrams, PCB layout etc. Prepare assembly drawings and BOMs. Works closely with Electrical engineers to apply all inputs and information as required developing final design drawings as appropriate. Must work well with interdisciplinary team. Must work within AS9100 framework and be familiar with Aerospace industry standards. Qualifications U.S. CITIZENSHIP REQUIRED POSSIBLE RELOCATION ASSISTANCE -Ability to collaborate with engineers and program/ project managers to create design drawings, reports and inputs to project schedules. - 3+ years experience with Mentor Graphics or Altium software - Knowledge of IPC-A-600, IPC-A-610, IPC-2221, IPC-222, IPC-6012 and J-STD-001 standards. -Knowledge and use of MS Office products - Experience and knowledge utilizing AutoCAD 2012 is desired Additional Information In addition to competitive salaries, ZIN offers excellent benefits to our associates, including medical, vision, and dental insurance; short- and long-term disability; life insurance; paid leave and paid holidays; 401(k) retirement plan (immediate vesting); education and training reimbursement; professional development opportunities; employee assistance program; flexible spending plans; credit union membership; and direct deposit. ZIN-Technologies, Inc. is an Equal Employment Opportunity Employer M/F/D/V

Since 1985, our core business has been enteral device product development, design, manufacturing, and engineering in a state-of-the-art facility near Cleveland, Ohio. AMT's steady growth consistently creates job opportunities in Northeast Ohio. We are always searching for new talent and would love for you to join our team! We strive to keep the small company feeling while still reaching users all over the globe. Position Summary: This person will work on the design and development of new and existing products within the enteral feeding & surgical industries, overseeing various projects from initial design & development as well as implementation into manufacturing. This will include design, prototyping, material research, component sourcing, BOM creation and manufacturing procedure development. Work is generally independent, but also collaborative in nature with others in the engineering department. Duties and Responsibilities: This list is not comprehensive but meant to represent the most common or important duties of the position. Other duties will be required and/or assigned. Product redesign & improvements to current products, processes, and materials Root cause analysis and corrective action implementation Alternate material sampling and testing Project management including timeline updates Presentations on project status updates Prototyping & product testing Vendor correspondence for both obtaining samples and getting quotes Cost analysis and price breakdown of components and assemblies BOM creation and manufacturing procedure development Design transfer to manufacturing & follow-up manufacturing support Supervisory Responsibilities: None Requirements Minimum Qualifications: Minimum of a 4 year bachelor's degree is required. 3+ years of relevant design and/or product development experience. Creative thinker, but also practical in getting things accomplished. Advanced experience using Solidworks and/or other 3D modeling software. Medical device development and experience with FDA submissions is a plus. Injection molding familiarity and/or experience is also a plus. Language Skills: Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures and/or governmental regulations. Ability to write reports, business correspondence and/or procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, vendors, non-engineers and/or the general public. Mathematical Skills: Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Essential Job Functions: Critical features of this job are described below. They may be subject to change at any time due to reasonable accommodation or other reasons. Mental: Must be able to effectively communicate with others; complete and understand complex analysis of numbers; read, analyze and interpret written materials; meet and exceed company standards; ensure compliance with company policies; respond appropriately to feedback to make improvements; maintain positive working relationships; troubleshoot and solve problems. Physical: Must be able to hear and verbally communicate for hours at a time, use computer equipment, electrical and general hand tools. Moderate noise level and limited exposure to physical risk. Knowledge, Skills, and Abilities Required: Knowledge of modern business communication, office procedures and methods. Skill to use a personal computer and various software packages such as Microsoft Office Suite. Ability to establish priorities, work independently with minimal supervision, and facilitate teamwork. Equipment Used: Solidwork 3D Modeling, 3D Printing, Mold Flow Analysis & FEA. Injection molding machines to aid in more advanced prototyping. Tensile Testers, Optical Comparators, Gauges and other QA tools. Telephones, computer, other office equipment as needed. Ability to operate electrical hand tools and general hand tools. Any basic machining capabilities is also a plus. Certificates, Licenses, Registrations: Maintains a valid Driver's License. Special/ Additional Requirements: Persons in this position may be required to pass a drug, alcohol, and/or criminal background check. AMT is an Equal Opportunity/Affirmative Action Employer. Benefits: Insurance: AMT offers major medical, dental, and vision insurance at the first of the month following 30 days of service. Other Benefits: AMT offers several other voluntary benefits including hospital indemnity, critical illness, term life insurance & long term disability (company paid), among others. 401k: AMT matches 100% of your contribution, up to 3% of your salary. Paid Time Off (PTO): In addition to nine paid holidays, AMT provides employees with paid time off (determined by length of service), starting on day one Other Exciting Perks! Family-oriented, Positive Working Environment Discretionary Yearly Raises On-site Vending & Gym Annual Employee Appreciation Picnic Tuition Reimbursement Employee Referral Bonus Program Employee Assistance Program

Product Design Engineer - Advanced Plastics & Automotive Applications Ravenna, OH | Full-Time | On-Site | Direct Hire About the Opportunity A leading global materials manufacturer is seeking a Product Design Engineer to join its advanced R&D team in Ravenna, OH. This role is ideal for an experienced engineer with a mechanical or materials background who enjoys technical problem-solving, design optimization, and collaborating directly with customers in automotive, consumer products, or home appliances. Youll serve as the critical link between innovation and application-conducting advanced material testing, CAE simulations, failure analysis, and customer-facing technical support. This is a hands-on role for someone who thrives in a fast-paced, engineering-driven environment with global collaboration and high-impact projects. What Youll Do Lead product design optimization projects using advanced engineering analysis tools (FEA/CAE) Collaborate with customers to solve application challenges in plastics and polymer-based systems Conduct failure analysis, material testing, life cycle assessments, and reverse engineering Utilize tools like ABAQUS, ANSYS, LS-Dyna, CATIA, and Hypermesh to simulate and evaluate structural, thermal, and deformation properties Support testing methods and experimental design for customer applications Prepare technical reports, support internal and customer training, and assist with setting up SOPs Collaborate with headquarters R&D team to align technical roadmaps and project priorities Minimum Qualifications: Bachelors or Masters degree in Mechanical Engineering or a related field 5+ years of product design, CAE simulation, or mechanical/materials testing experience-preferably in OEM or Tier 1 environments Hands-on experience with FEA tools (e.g., ABAQUS, LS-Dyna, ANSYS) Proficiency with CAD/CAE tools such as CATIA, HyperWorks, SolidWorks, or ProE Strong knowledge of thermoplastics and mechanical failure modes (fatigue, creep, high strain rate) Excellent communication and presentation skills, comfortable interfacing with customers U.S. Work Authorization (citizens or green card holders only; no sponsorship available) Preferred Qualifications: Experience with automotive or high-performance plastics design Background in precision engineering, aerospace, naval architecture, or materials science Familiarity with UTM testing, vibration welding, and other evaluation techniques Proactive problem-solving mindset and high attention to detail Comfortable managing cross-functional technical projects Why Join Work on the cutting edge of materials R&D for top automotive and consumer product brands Competitive base salary + bonus potential Full medical, dental, vision, 401(k) with match, and PTO Be part of a collaborative, global engineering team Opportunity to grow into a technical lead or customer-facing SME role

Build your career at Tri-State! Tri-State Forest Products is a family owned and operated business. Tri-State is the leading wholesale building materials distributor in the Mid-West with 10 locations in Ohio, Indiana, Michigan, Kentucky and Tennessee specializing in engineered wood products. For over 30 years we've been providing our brand of personal service accompanied with high quality products to the Tri-State market areas. If you want to feel appreciated and valued while working with a great team, Tri-State is the place to be. Job Summary: The EWP designer position is a full-time time position working at our Hubbard, OH branch. They design residential and light commercial engineered wood floor and roof systems. This designer will work closely with the retail lumber dealer and their builder. Individual will report to the head of the EWP department. Product training is provided. Responsibilities: Work directly with the design team Design engineered wood products such as I-joist, wood beams and connectors into residential and commercial blueprints. Provide customer support answering questions about personal designs and/or other team member designs. Identify and recommend the best products to customers for their specific job application. Utilize provided design software to interpret residential and commercial blueprints into structural placement estimate plans. Respond to customer and associate inquiries as needed to sell, train, and support engineered wood products. Qualifications: Basic knowledge of architecture and/or CAD Systems Strong math skills Strong written and oral communication skills Must be well organized and good at multi-tasking Outgoing and professional personality, with a “can do” attitude Team player Benefits: Medical & Prescription coverage Dental & Vision Coverage Hospital & Accident Coverage Company Paid Basic Life Insurance (Employee, Spouse, & Children) Company Paid Short-Term & Long-Term Disability Additional Group Life Insurance Paid Time Off (Immediately Available Upon Hire) Holiday Pay Traditional & Roth 401k Options w/ annual company match Employee Referral Program **This job description is intended to describe the general nature and level of the work being performed by the individuals assigned to this job. This is not an exhaustive list of all duties and responsibilities. Management reserves the right to amend and change the duties and responsibilities of this job to meet business and organizational needs as necessary. **Tri-State is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran's status, or, any other protected characteristic.