Computer aided design designer jobs in Centereach, NY

UBS is recruiting for the position of Structural CAD Designer and BIM Modeler. The Structural CAD / BIM Designer's primary responsibility will be the development of AutoCAD drawings and BIM Models for construction projects in New York City and other regions. Key Responsibilities: · Assist in the design of hoisting, access equipment, and protection projects from preliminary design through construction. · Prepare design drawings to support construction activities. CAD drawings to include the following (Training will be provided): · Plans, sections, elevations, and details. · Installation and Field drawings as required to support Field Operations. · Assist Field Operations during construction as needed. · Review construction drawings in detail for accuracy and constructability. · Field confirmation and measurements of various equipment and structural requirements. Skills & Requirements: · Successful completion of Computer Aided Design Courses (associate or bachelor's Degree is preferred). · Full knowledge of BIM Modeling. All Successful Candidates Must: · Be able to communicate in English, both verbally and in writing. Benefits: 1. Personal Time Off: 2-3 Weeks of vacation (depending on experience). 2. Health Insurance: Medical, Dental and Vision Insurance (Individuals and family). 3. 401K Plan: UBS offers 401K plan for retirement savings. 4. Discretionary Bonus: UBS pays discretionary Year-end bonuses based on the employee's performance and the company's overall performance for the relevant year. *Pay is based on qualifications & experience- $60,000-120,000.

Mechanical Design Engineer (Building Systems) $54/hr - $58/hr + Bonus + Training + Progression + Overtime + 401k + Medical + Dental + Vision Westport, Connecticut (Commutable from: Norwalk, Fairfield, Darien) Are you a Mechanical Engineer looking to take the lead on a range of technical projects within mechanical building systems and progress your career into lead roles in the future, while getting full on the job training on electrical & plumbing systems to broaden your expertise. On offer is a change to increase your responsibility and take the technical lead on innovative mechanical design projects for household name clients. You will receive all the tools to develop into a technical expert in the future. This company are specialists within their industry, and are now in a phase of exciting growth as an organization. This is a unique opportunity to get in at the ground floor of already well-established organization. On offer is a chance to work on one-of-a-kind projects with household name clients, surrounding mechanical building systems, you will develop into a technical expert in the industry and progress your career through clear pathways into leadership. This role would suit a Mechanical Design Engineer from a building system background, looking to broaden their experience and play a key role in the growth of an exciting organization. The Role: Mechanical Design of intricate building systems Work closely with key household name client supporting their needs Progress into a technical expert in the future The Candidate: Building System Mechanical Design experience AutoCAD & Revit experience Understanding of Building Codes To apply for this role or to be considered for further roles, please click "Apply Now”, or contact Edward Chandler at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Keywords: Mechanical Design Engineer; Mechanical Engineer; Building Systems; HVAC Design; MEP Engineering; Mechanical Building Systems; Building Services Engineering; Mechanical Drafting; AutoCAD; Revit; BIM; 3D Modelling; Technical Design; Mechanical Layouts; Building Codes; Construction Codes; Mechanical Schematics; Piping Design; Plumbing Systems; Electrical Systems Training; Multidisciplinary Engineering; Facilities Engineering; Commercial Buildings; Design Engineering; Project Engineering; Technical Lead; Engineering Progression; Engineering Training; Westport CT; Connecticut Engineering Jobs; Norwalk; Fairfield; Darien; Mechanical Engineering Contractor; Engineering Consultancy; Building Services Projects; Client-Facing Engineer; Mechanical System Integration.

Job Title: CAD Designer - 3D & Graphic, Tara Toy Department: Product Design Reporting To: Director, Product Design Just Play is a passionate and trend driven leader in the children's consumer goods industry. Our products are an impressive mix of promotional and everyday items for the whole family. We work with the world's leading children's entertainment brands to manufacture and distribute exceptional products to every major mass retailer throughout North America and around the world. Job Summary: We're a fast-moving toy company looking for a versatile and experienced CAD Designer to join our creative team. This role is ideal for someone who can primarily work on 3D product design but is willing and able to take on occasional graphic design tasks like packaging, branding, and licensing work when needed. If you're passionate about toys, love to collaborate, and can keep pace with tight timelines, we'd love to hear from you. This is not a hybrid role, and being on site five days a week is required. Principal Responsibilities: Create detailed and accurate 3D CAD models for toys and related products. Develop technical drawings and files for prototyping and manufacturing. Collaborate with product development, marketing, and licensing teams to ensure cohesive design execution. Support license-based design work, adapting assets for various product lines and packaging formats. Work on multiple projects in a fast-paced, team-oriented environment. Occasionally design packaging layouts, branding elements, and presentation materials. Minimum Qualifications: 3+ years of experience in CAD design, preferably in toys, consumer products, or similar industries. Proficiency in 3D software such as SolidWorks, Blender, ZBrush, Rhino, Fusion 360, or similar. Graphic design skills with hands-on experience using Adobe Creative Suite (Illustrator, Photoshop, InDesign). Comfortable working on both original products and licensed IPs. Highly organized with strong attention to detail and ability to meet deadlines. Experience in the toy industry or children's consumer products preferred. Understanding of toy safety standards, prototyping, or manufacturing processes preferred. Illustration or rendering skills preferred. Fluency in English (both written and verbal). Please include a copy of, or link to, your portfolio for review. Just Play is an equal opportunity employer. We welcome all applicants without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description InProduction is the leading provider of temporary seating, staging, structures, and scenic production for the U.S. live events industry. The Company is a valuable partner to event organizers throughout the entire venue transformation process, with core services including design and fabrication, delivery and installation, on-site execution, and tear down. These services span a variety of end verticals including golf, motorsports, music festivals, other sports & entertainment, and corporate events. InProduction maintains a total commitment to excellence for an exceptional outcome at every event. The Company is backed by ZMC. ZMC is a leading private equity firm comprised of experienced investors and executives who invest in, and manage, a diverse group of media and communications enterprises. Founded in 2001, ZMC's investment philosophy centers on operational value creation driven by targeted investment themes, deep sector expertise, and strong partnerships with industry and operating executives. ZMC approaches its investments in collaboration with management teams and has a successful track record of actively adding value to portfolio companies. Come join us! Check out our web page ********************************* InProduction is looking for talented individuals to join our company to help create and design solutions for high profile nationwide events. The ideal candidate would be able to provide accurate drawings for our sales staff using our drawing library of parts. These drawings would be provided to our customers, building officials and our technicians in the field. The preference would be for candidates that are willing and able to grow with our company as we are experiencing tremendous growth within the industry. Duties and Responsibilities Collaborate with other team members to achieve functional design solutions against various constraints Participate in design reviews and capable of working with site surveys Produce code compliant drawings and specifications Maintain schedules for each project deadline to ensure that project deadlines are maintained and met Responsible for reviewing and verifying drawings in various design modeling software formats Capable of detailing drawings that will be used for manufacturing purposes Requirements Education and experience: Minimum of 4 years of professional experience using AutoCAD required Associate's degree or AutoCAD certification preferred Preferred experience in entertainment and events industry (Live Events, Sporting Events/Venues, Theater) Position Requirements: This job requires you to report to office Must have a strong AutoCAD foundation & proficient in creating detailed drawings Working knowledge of dynamic blocks and corresponding ability to create/expand upon existing library Working knowledge of 3D and programs such as 3DS Max preferred Work in a dynamic, driven, & collaborative environment Proficiency in PC based computing, Microsoft Office, and use of Windows OS Adobe Creative Suite The position requires a background check and drug screening Compensation: $22-26 per hour (based on experience). Benefits Health, Dental, and Vision Insurance Life Insurance Education Benefits Paid Vacation Floating Holidays Paid Holidays

FPM Group, a multi-disciplined engineering, architecture, and environmental science consulting firm established in 1968, has an exciting opportunity in our Bohemia, NY and Oneida, NY offices. Work closely with architects and engineers in the development of construction documents, from the first field visit through the successful completion of construction. This position will allow broad access to all aspects of the consulting experience and help develop a well-rounded skillset. Primary Responsibilities: Assist in formation and development of construction drawings and specifications for public and private clientele Perform fieldwork to investigate, measure, take photos, and document existing conditions Perform calculations, analyze data, and generate decision matrices to support design objectives Computer drafting and design using AutoCAD Client interaction and teamwork with other Project Team members Supervisory Responsibilities: None Education and/or Experience: Bachelor's Degree in Architecture, Architectural Engineering, or other related discipline 5-10 years of experience in a consulting environment Experience with municipalities and other government agencies is a plus Knowledge, Skills, and Abilities: Expertise in AutoCAD and good experience with MS Office Suite Strong interest in detail development for a wide array of projects having challenging conditions Certificates, Licenses, Registrations: None Security Clearance: • None Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: General office environment. Some travel both domestically and internationally required based on business demands. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Did you love building as a kid? Do you enjoy taking something apart, just to figure out how to put it back together? Do you geek out on robots? Our engineers drive packaging innovation, creating new ways to improve - and increase - performance. We're passionate about designing custom equipment that exceeds our customers' expectations. Our engineers partner closely not only with our customers, but also with peers across sales, manufacturing, and assembly. We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments. If you're excited by how machines work and want to make them better, we want to talk to you. Do we have your attention? Keep reading. Modern Packaging is seeking a talented Mechanical Design Engineer to develop, design, and implement new product designs of automated machinery. Candidate shall have the ability to create new designs, modify existing designs, and provide technical support to customers. The position is located at our Deer Park, NY location and will report to the Director of Engineering. Are you excited about this work? Engineering, design, and fabrication of automated machinery Develop machine drawings, 3D modeling, assembly and detail drawings. Manage projects from quote to FAT (Factory Acceptance Test). Interface with manufacturing to ensure parts are properly fabricated, machined, and assembled. This will include updating revisions to mechanical design specifications/drawings. Interface with assembly department to conduct machine testing and proper operation. Interface with other departments e.g., controls, parts, purchasing, etc., to coordinate work/projects and ensure customer on-time delivery. Create and maintain Bill of Materials. What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. The education and experience you bring to a role with us matter. Placement within our salary range is determined based upon years of directly relatable experience for your position. These components, along with local and national compensation survey data, contribute to deciding a candidate's potential starting rate of pay. Total compensation includes your pay, potential short-term incentive opportunities, comprehensive medical/dental/vision programs, as well as life insurance, disability insurance, paid time off programs, a retirement savings plan with a company match, and a wellness program. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Base Salary Range: $95,000 - $115,000 If this sounds like you, we want to connect! Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology (BSME or BSMET), or similar engineering or technical degree from an accredited four-year college or university or equivalent industry experience in mechanical design required. At least 3 years' experience in design of automated industrial machinery. Experience using AutoCAD and Autodesk Inventor and/or SolidWorks. General knowledge of manufacturing processes, techniques, and practices. Strong analytical skills, ability to utilize knowledge to provide creative design ideas. Excellent verbal and written communication skills. Desire to be hands-on with equipment building & design, ability to work both independently and in a team environment. Pro Mach, Inc. We have been named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strengths of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! More career opportunities to consider! Pro Mach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #MODER

Job DescriptionBenefits: 401(k) Bonus based on performance Competitive salary Health insurance Paid time off Architectural Designer Employment Type: Full-Time | 3-5 years experience Compensation: 65,000 75,000 based on experience About the Role Were seeking a motivated Architectural Designer to join our growing design team. This role offers hands-on experience in drafting, modeling, and project documentation under the mentorship of Project Managers and Senior Architectural Designers. Youll gain exposure to every stage of the architectural processfrom concept development to contract administrationwhile building a strong foundation in design, technical production, and coordination. **add client interaction Description: Produce accurate drafting and technical drawings in accordance with office standards. Assist in the development of construction documents, design presentations, and other project deliverables. Prepare and submit drawings and documentation for building department approvals and permits. Conduct existing conditions surveys, field measurements, and site documentation. Perform redline revisions efficiently and coordinate updates based on team feedback. Edit and maintain project management software and organize project files. Conduct basic code and product research under supervision. Requirements: Bachelors degree (or equivalent experience) in Architecture or a related field. Professional experience in architectural design or drafting. Proficiency in AutoCAD and familiarity with Bluebeam and Adobe Creative Suite. Working knowledge of construction documents and building systems. Strong attention to detail, organization, and willingness to learn. Excellent communication skills and the ability to collaborate in a team environment. Ability to work independently and travel as needed with valid Drivers License. Preferred Experience: Newforma software Commercial and/or medical project experience Your Growth Path Were committed to professional development and long-term growth. 03 Months | Orientation & Training: Learn office standards, drafting procedures, and software. Support redlines, surveys, and permit packages. 3 Months 2 Years | Developing Independence: Manage drafting packages with limited supervision, expand code knowledge, and contribute to design studies. 2+ Years | Preparing for Advancement: Demonstrate proficiency in drafting and coordination, mentor new designers, and prepare for promotion to Senior Architectural Designer.

Job DescriptionBenefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance CAD drafting of buildings, construction equipment, infrastructures, Field Inspections/Measurements. Must have up to 1 year CAD drafting experience Must be able to read construction drawings Architectural, Structural, Support of Excavation Must know Auto CAD 2013 or higher Must have basic knowledge of construction and terminology. Drafting, and reading construction drawings test will be given at interview.

Full-time Description We are building an innovative, small and home based business marketplace, spanning the digital and physical worlds-from the details on a screen, to the delivery of a package, and everything in between. You will be charged with creating simple, seamless solutions to complex, previously unsolved problems surrounding local and last mile delivery. This is a hands-on role in every phase of the project lifecycle, from early strategy and concepting, through customer research, detailed design, launch, and optimization. Candidates should have deep knowledge in a variety of design disciplines: user experience, user interface design, prototyping, branding, and visual design. We value creative exploration, iteration, and attention to detail. Designing our service requires an intimate understanding of our diverse users-achieved through continuous research and testing-and close collaboration with many disciplines inside our organization About The Role We are looking for an ambitious Product Designer to define our experience. User-centric Business-minded Craft-focused Creative End-to-end strategic thinkers What You'll Do Design, prototype, and launch great digital experiences that are functional, easy to use, and informed by data and research Create concepts, user flows, screens, and prototypes that support our mission Make design decisions with a deep understanding of our entire end-to-end delivery service, marketplace, merchants and customers Plan and run user tests and other design research to inform your point of view Collaborate with design and marketing team to evolve and refine our visual language, framework, style guide and design process Partner with Marketing, Customer Success, Sales and Co-Founders to understand the problems and define the scope and requirements for a solution Work alongside engineers throughout the design process to ensure your ideas are feasible and later built the way you envision. Requirements Who You Are Minimum of 2 years designing experiences on mobile and web Experience working cross functionally to design & ship products A portfolio of personal or professional projects you've designed and helped ship Understanding of and a passion for user-centered design principles Driven, able to adapt and grow in a fast-paced environment Availability Hybrid Work Solution Office Meetings, From Home & Field Work to collect data / research clients

Job Title Business Unit Department Reports To Product Design Engineer Chore-Time Engineering Engineering Manager BU Location BU Acceptance Approved By: Date Approved Milford, IN Overall Purpose: Why the Job Exists & What You Will Do: As the Product Design Engineer, you will design, develop, and create innovative poultry components and equipment to meet customer expectations and business goals. Essential Job Functions & Expected Outcomes: Your Accountabilities in the Role Product Design & Development: 100% of the Job Communicates and collaborates with customers, dealers, and network to establish product needs within the industry, as well as research competitive product lines, to create new or enhanced products that will drive business goals. Manages the design, layout, specifications, and testing of new or enhanced products, work with sheet metal and plastics, work with internal and external manufacturing to ensure the quality, timing, resources, and costs meet the overall expected results of the project. Leads, collaborates, and communicates with project team members to direct the detailed product design and implementation, ensuring a best practice approach for optimal implementation results. Travels to assist with product installments, meetings, and trade shows through the U.S. and Internationally to ensure the Voice of the Customer is integrated in every part of the processes. The job criteria may include other duties, responsibilities and activities, which may change or be assigned at any item with or without notice. Position Requirements: Education: Bachelor's Degree in Mechanical or Agricultural Engineering, or a related field; will also consider an equivalent combination of education and experience. Experience: 2+ years of experience with plastic part design, ventilation, fluid mechanics, or product design within an agricultural or farming environment preferred; will consider an entry level person with strong aptitude for the role preferably with related experience/understanding of poultry husbandry and housing. Certification(s): N/A Functional Skills: Strong foundational understanding of engineering and mechanical principles to design parts that include motors, mechanical power components, sheet metal parts, injection mold and extruded plastic parts, material flow, air movement/cooling systems, and movement of material (i.e. feed, eggs, and waste). The position requires strong analytical, problem-solving, conceptual, project management, time management, and organizational skills to take ideas, design a product, and execute to meet market needs. A familiarity with CE European product standards would be a plus. Technology Aptitude/Skills: Strong skill set in AutoCAD/3D CAD programming (Inventor/Vault); ERP system experience is a plus (Oracle preferred); Advanced Microsoft Office Skills (Word, Excel, Teams) required as well. Language Skills: Excellent verbal and written communication skills; will present ideas and outlines to management team, vendors, and customers. Leadership/Behaviors: Ability to work with an experienced team, who is collaborative and supportive. Can learn quickly to move past barriers and be a strong influencer to get things done to own the role. Culture Match: Excellent abstract thinking; creative, conceptual thinker with a solid common-sense approach to create solutions and push through obstacles. High integrity, Dependability, who can handle confidential information well. Will also be Customer-Focused, Cost Conscious, Strives for Excellence, and can thrive in a fast-paced environment. Will also be able to visit farms and interact with customers in a professional, well-received way. Core Values that Apply to All Positions: Integrity in all things Customers are why we exist Profitability is a must Excellence in all we do People make the difference Equipment Used: This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and similar machines. This role will often use laboratory testing equipment, measuring instruments, waterjet, 3d printer, and other mechanical equipment to produce prototype and/or test equipment. Physical Requirements to Perform Essential Functions: Ability to operate a motor vehicle as needed for travel in the role Ability to sit at desk for 5+ hours per day Ability to operate keyboard and view computer screen for majority of day 6-7 hours Ability to write ideas/information in a logical flow for 5+ hours per day Ability to read and respond on an on-going basis daily due to nature of the work, throughout the day Ability to read, write and speak English fluently Ability to communicate with others via phone, in-person, and computer on-going Ability to listen to customers, problem-solve, and respond accordingly Ability to sit, stand, bend, reach, kneel, squat, twist, push, pull, walk, stoop, crouch, and carry items frequently Lifting up to 15 lbs. sporadically Environmental Conditions & Travel: The employee is primarily exposed to a normal office environment with moderate noise. The employee is occasionally required to wear suitable Personal Protective Equipment while visiting manufacturing departments and client locations. Testing and engineering lab environment with machines and equipment related to prototyping and testing. This position may be occasionally exposed to animals, dust, and dirt when visiting client locations. This position may face inclement weather conditions when traveling. Travel: 10 - 20% travel is required (Domestic & International) I have reviewed and understand the above . I understand that the company may change this as it deems necessary and at its discretion. I also understand that a copy of this job description is available to me through request to my manager or Human Resources department. Employee Name (Print) Employee Signature Date

FLSA Status: Salary/Exempt Reports To: General Manager Direct Reports: None Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Responsibilities • Assist with research and development, new product introduction, and production deployment. • Create CAD models, drawings, specification sheets, and prototypes for new and existing products. • Modify existing products to improve efficiency and performance. • Design for manufacturability. • Research materials and production costs to determine manufacturing requirements. • Ensure product designs conform to customer and government specifications. • Test designs to ensure they meet safety, usability, and environmental impact standards. • Analyze data from tests and identify opportunities for improvement. • Collaborate with engineering, sales, procurement, and production teams. • Present designs and prototypes to customers and colleagues. • Create BOMs and routings for new products, legacy products, and engineering changes as necessary. • Develop and manage costing analysis as necessary during product development and deployment. • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system. • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc. • Manage projects, including budgets, schedules, and costs when applicable. • Perform DFMEAs, PFMEAs, and Risk Assessments. • Ensure that the company's designs and designing processes comply with all government laws and regulations. • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision-making. • Collaborate with quality team to assure products are being produced to applicable specifications. • Evaluate quality control processes and make recommendations for improvements in quality control. • Devise procedures to inspect and report quality issues. • Assure the reliability and consistency of product manufacturing by checking processes and final output. • Facilitate proactive solutions by collecting and analyzing manufacturing data. • Document and optimize design procedures to ensure replicability and compliance with internal and external standards. • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis. • Assist in the preparation for quality audits. • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Minimum Qualifications Education and Experience • Bachelor of Science in engineering or related field • 3-10 years of design engineering or relevant experience • 2-5 years of electrical connector design experience Knowledge • Ability to create 3D Computer-aided design (CAD) models and drawings • Ability to read drawings, specifications, test procedures, etc. • Fundamental mathematical and physical principles • Proficient in MS Office • Geometric Dimensioning and Tolerancing (GD&T) Skills • Good oral and written communication and presentation skills • Great interpersonal skills • Excellent organizational skills • Results-oriented with strong analytical skills • Ability to work well independently and part of a team • Ability to motivate team members in a creative and effective manner • Ability to work effectively under stressful and dynamic environments Other responsibilities, initiatives and ad-hoc projects as required. Compensation range: $90,000 - $125,000

Job DescriptionPower-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for you to join our collaborative team as a Design Engineer. This is a full-time, on-site role. Primary Functions Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Salary commensurate with experience (Range from $45,000 - $145,000 annually) Benefits Package Medical, Dental, Vision PTO Program and Paid Holidays 401K EAP Design Engineer Essential Responsibilities Review engineered contract drawings and specifications for the design of electrical control panels. Design and layout of electrical panels using AutoCAD. Ensure that all panels are being designed and constructed to UL Standards. Creating Bill of Materials for the sales engineer team. Create testing procedures for specific projects to be used by shop personnel. Determine parameters to program variable frequency drives and soft starters. Provide technical support on the products we manufacture. Design Engineer Necessary Qualifications 3 years+ experience in the design of electrical system preferred Ability to use AutoCAD for electrical design work. Hold a degree in the engineering field. Must have a valid and clean driver's license to travel to job sites and other branches as needed. Design Engineer Physical Requirements Some Minor Lifting and Moving of Parts and Equipment We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Quanex is looking for a Design Engineer to join our team located in New Haven, CT. Come join the Quanex Access Solutions Team (Bilco) where you can be a part of a growing team! The Bilco Brand manufactures a complete line of products that provide access for commercial building applications. Products are available in a number of standard sizes and are custom engineered to meet unique access requirements. We Offer You! * Competitive Salary * Bonus Potential * 401K with 5% company match, yours to keep after 2 years * 15% immediate return if you participate in the company's ESPP * Medical, Dental & Vision Plans * Employer paid disability plans and life insurance * Paid Time Off & Holidays * Various Work Schedules * Tuition support for degree and continuous education * Employee Resource Groups focused on employee empowerment What's attractive about the Design Engineer? * Responsibility for product development within a Lean environment, engineering documentation for all product lines, and product review and testing. * Work in collaborative environment. * Be a part of a growth oriented business. What Success Looks Like: * Initiating product design and innovation. * Ensure that products comply with all applicable codes and regulations. * Determining feasibility of manufacture and modifications necessary to alter construction of a specific product to accommodate customer requirements. * Supporting engineering staff in testing of new product prototypes, or new design applications to customer specifications. * Interacting with customers and meeting their needs. What You Bring: * Bachelor of Science degree in Mechanical Engineering or Industrial Engineering * 5+ years of product development experience * Excellent verbal and written communication skills * The ability to work closely with other engineers and others, including external customers, in a team environment. * Experience with root cause problem solving and driving improvements to designs and processes. * Experience with Solidworks and AutoCAD. The targeted salary range for this position is $78,000-$90,000 with bonus potential. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com. #QHP1 #LI-LG1

Job Description Design Engineer Bohemia, NY * US Citizenship is required for this role * If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has a career opportunity available for a hands-on Design Engineer to join our growing Engineering and Test Division. Our three divisions, Engineering and Test, Technical Services, and Mission Systems, make DTB a diverse and interesting place to work. Dayton T. Brown, Inc. is a premier leader as an independent testing laboratory providing testing and engineering services. We support customers across all platforms and services in the military, aerospace, shipboard, railway, weapons manufacturers, automotive and consumer industries worldwide. The ideal candidate will be able to hit the ground running, must take a hands-on approach to their work, be flexible in their duties, and be a proven self-starter. Responsibilities include, but are not limited to: Design custom structural test fixtures that meet customer statement of work requirements Create fixture concepts based on requirements Develop a design from concept through completion based on discussions with the internal engineering team and end user/customer Interfaces with customers and the engineering team to translate design needs Participate in and conduct initial and ongoing design reviews Select appropriate structural material based on engineering analysis Use Autodesk Inventor to create drawings of machined parts, weldments, schematics and top and sub-assemblies Create drawings to commercial standards that can be used for fabrication and assembly Prepare bills of materials that include fabricated parts, standard hardware, and applicable test instrumentation Apply tolerances to ensure parts are produced with the desired fit Demonstrate a basic understanding of data acquisition systems and hydraulic/pneumatic control systems. Familiarity with various fabrication methods Prepare fabrication plan and fixture assembly procedures Act as the technical contact for the fabricators and assemblers during the production phase of projects Supporting quoting efforts for Design/Fabrication as needed Collaborate with Project Managers to status ongoing projects Provide project engineering support during all aspects of the test program Manage test programs. Some of the areas of testing include structural testing, armament, pressure, and windblast. Coordinate required resources and schedule required to conduct testing Interface with customers Write test procedures and test reports Travel as required within the continental US Overtime will be required during certain periods of a project Required Qualifications: BSME or comparable 4+ years' experience working as a Design Engineer Currently hold an FE certification and eligible to go for a PE A PE licensure will eventually be required Strong proficiency using Autodesk Inventor/ Assembly handling or equivalent software Experience in mechanical CAD design (Autodesk Inventor), ability to perform simple design hand calculations, fixture design, and especially fixture design for testing products Knowledge of FEM/Analysis Must be a US Citizen and able to pass a drug test and background check Expertise in defense, aerospace, telecom, commercial, and/or automotive product qualification requirements Ability to read and interpret test specifications Must be computer literate, including MS Office Must be able to work in a fast-paced work environment Ability to work without supervision and to provide technical consultation and guidance Experience managing labor and resource schedules Strong communication skills, both written and verbal Demonstrated technical innovation/guidance, project management, and problem solving Ability to work without supervision, with latitude for independent action and decision making Preferred Qualifications: Experience in using FEM software like ANSYS is a plus but not required Experience with CNC machining beneficial but not required Dayton T. Brown, Inc. offers: Competitive salaries Tuition Reimbursement at up to 100% Medical/Dental/Vision/FSA 401k with company matching Paid time off Group life insurance Employee activities A family-friendly work culture Cash incentives and recognition awards Dayton T. Brown, Inc. is an equal opportunity employer - Veterans and Disabled. Job Posted by ApplicantPro

Job Description The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions Works on multiple highly complex major projects requiring innovative, original solutions May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget. Subject Matter Expert in at least one area or system. Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material. Exercises considerable latitude and technical judgment in deciding work methods. Can lead a group of engineers and technicians, responsible for budget and manpower estimates. Develops innovative solutions to unique problems. Works mostly independently with minimal supervision. Exercises substantial initiative/ judgment in work methods and in interpreting goals. Able to give effective presentations to critical/high level customers. Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time. Responsible for large and fairly complex projects. Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner. Proven leadership skills. Identifies problems and actively devises appropriate solutions. Ability to continuously improve through additional training or research Qualifications/Minimum requirements U.S. Citizenship Required. BSME or equivalent educational degree required. Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred. Strong knowledge of AS9100 and ISO requirements. Ability to read, write, and speak in English proficiently. Strong work ethic; can work independently or in a group. Highly professional with excellent telephone etiquette. Must be detail oriented, self-motivated and the ability to multi-task in a fast-paced environment. Salary Range: $90k to $100k annually. This estimated range represents a good faith projection of what we believe is a competitive compensation range for this position. Please understand that the offered salary will be determined based on factors such as the applicant's credentials, experiences, and the specific requirements of the role, as well as potential internal equity and external market considerations. We do not customarily hire at the top end of the range. East/West adheres to pay transparency and equity principles and strives to remain competitive within the market. The full compensation package will be shared and discussed during the hiring process. In addition to the base salary, East/West is committed to supporting our team's well-being and professional growth through a comprehensive benefits package. This generous benefits package, includes but is not limited to: Medical Dental, Vision, Life Insurance, Long-Term Disability Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD) PTO (3 weeks accrued first year!) 10 Paid Holidays Flexible Spending Accounts 401(k) with matching Pet Insurance 9/80 work week (Every other Friday off) Job Title: Design Engineer 3 Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC . is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Collaboration with multidisciplinary set of engineers to design and analyze mechanical components and systems for experimental aero-thermal test. To accomplish the given tasks, you must be proficient developing mechanical designs using CAD and applying engineering principles to analyze the integrity and/or performance of the designed components and subsystems. Communication and documentation are critical as you will often need to prepare slides (or other documents) to present to the team, whether it is to describe detailed designs or to discuss project progress. Job Description Roles and Responsibilities: * Execute the design, analysis and evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures and program / product requirements. * Develop mechanical components and subsystems using 3D CAD * Prepare drawings to manufacture prototypes or components of an experimental setup * Perform analyses ranging from classical textbook methods and 1D spreadsheet calculations to Finite Element Analysis (FEA) simulations to predict structural, thermal, and/or fluidic behavior of systems/components. * Document and communicate assumptions, inputs and proposed solutions to multidisciplinary teams for review * Prepare presentations and slides to communicate ideas and/or progress on projects * Ability to work well in with Integrated Product Teams to create and verify novel design solutions that meet established program objectives and requirements (technical, cost, schedule) Required Qualifications * Bachelor's Degree in Mechanical or Aerospace Engineering from an accredited college or university * 1+ years engineering experience, including internships, with experience in High Speed propulsion industry * This role requires use of technical data subject to U.S. Government contract restrictions and this posting is only for U.S. Citizens. GE will require proof of status. Desired Characteristics * Strong understanding of engineering principles and applying them to technical tasks * Demonstrated ability to analyze and resolve problems * Skilled with Microsoft Office Suite, specifically Excel and PowerPoint * Skilled in mechanical design using 3D CAD Siemens NX or equivalent * Experience with Finite Element Analysis (FEA) and performing simulations in ANSYS for thermal-structural analysis * Understanding of compressible flow * Knowledge of manufacturing processes including Additive Manufacturing (AM) * Problem solver: analytical-minded, challenges existing processes, critical thinker * Ability to obtain and maintain a DoD Security Clearance The base pay range for this position is $81,200 - $101,500. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on December 11th, 2025. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Quanex is looking for a Design Engineer to join our team located in New Haven, CT. Come join the Quanex Access Solutions Team (Bilco) where you can be a part of a growing team! The Bilco Brand manufactures a complete line of products that provide access for commercial building applications. Products are available in a number of standard sizes and are custom engineered to meet unique access requirements. We Offer You! Competitive Salary Bonus Potential 401K with 5% company match, yours to keep after 2 years 15% immediate return if you participate in the company's ESPP Medical, Dental & Vision Plans Employer paid disability plans and life insurance Paid Time Off & Holidays Various Work Schedules Tuition support for degree and continuous education Employee Resource Groups focused on employee empowerment What's attractive about the Design Engineer? Responsibility for product development within a Lean environment, engineering documentation for all product lines, and product review and testing. Work in collaborative environment. Be a part of a growth oriented business. What Success Looks Like: Initiating product design and innovation. Ensure that products comply with all applicable codes and regulations. Determining feasibility of manufacture and modifications necessary to alter construction of a specific product to accommodate customer requirements. Supporting engineering staff in testing of new product prototypes, or new design applications to customer specifications. Interacting with customers and meeting their needs. What You Bring: Bachelor of Science degree in Mechanical Engineering or Industrial Engineering 5+ years of product development experience Excellent verbal and written communication skills The ability to work closely with other engineers and others, including external customers, in a team environment. Experience with root cause problem solving and driving improvements to designs and processes. Experience with Solidworks and AutoCAD. The targeted salary range for this position is $78,000-$90,000 with bonus potential. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com. #QHP1 #LI-LG1

Summary:This position is responsible for the design and development of beauty display components, including vacuum trays, injection trays, fabricates, corrugated structures, and end caps. The role involves 3D modeling, high-quality rendering, and the preparation of detailed 2D engineering drawings. In addition, the designer will produce high-precision prototype samples using laser cutting machines and 3D printers. Success in this role requires a balanced understanding of aesthetic design principles and practical engineering applications.Job Description: • Create 3D design models for beauty display products, including vacuum trays, injection trays, and corrugated/fabricated parts • Produce high-quality rendered visuals for client presentations and internal reviews • Generate accurate 2D engineering drawings to support manufacturing and prototyping • Operate laser cutting machines and 3D printers to fabricate prototype samples • Collaborate closely with cross-functional teams, including engineering, product development, and marketing • Ensure that all designs are optimized for cost-effective manufacturing and material use • Continuously improve processes and stay updated with the latest design and prototyping technologies Benefits Premium Medical Insurance Coverage 401(k) Savings Plan Paid Time Off (PTO) based on seniority Paid Holidays Additional Workplace Offerings (subject to change or eligibility.) Annual Bonus Plan Onsite Employee Fitness Center with Indoor Racquetball Court and Yoga Room Summer Fridays Complimentary Gourmet Breakfast, Lunch, and Dinner Relocation Support for New Hires Work Anniversary Recognitions Congratulatory & Condolence Gifts Employee Referral Bonus Program License/Certification Reimbursements Corporate Employee Discounts Visa Sponsorships (100% paid by the company) i.e., New H-1B, H-1B Transfer, O-1, and Green Card Commuter Support (Shuttle Bus Program and EZPass Support) Vehicle Perks Qualification(s):Education(s):Bachelor of Science (B.S): Industrial Design (Required), Bachelor of Science (B.S): Mechanical Engineering (Required) Work Experience:Experience Range I: 0 - 2 years of relevant experience or industry exposure in a related field Skill(s):3D Designing, Adobe Photoshop, Luxion KeyShot, Product Engineering, Siemens NX, SolidWorksLanguage(s):EnglishCertification(s):Not Applicable The anticipated compensation range is 19.25 - 36.55 USD Hourly Actual compensation will be determined based on various factors including qualifications, education, experience, and location. The pay range is subject to change at any time dependent on a variety of internal and external factors. Kiss Nail Products, Inc., KDC GA Corp., Ivy Enterprises, Inc., AST Systems, LLC, Red Beauty, Inc., or Dae Do, Inc. (collectively, the “Company”) is an equal opportunity employer and is committed to a diverse and inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by law.

Collaboration with multidisciplinary set of engineers to design and analyze mechanical components and systems for experimental aero-thermal test. To accomplish the given tasks, you must be proficient developing mechanical designs using CAD and applying engineering principles to analyze the integrity and/or performance of the designed components and subsystems. Communication and documentation are critical as you will often need to prepare slides (or other documents) to present to the team, whether it is to describe detailed designs or to discuss project progress. **Job Description** **Roles and Responsibilities:** + Execute the design, analysis and evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures and program / product requirements. + Develop mechanical components and subsystems using 3D CAD + Prepare drawings to manufacture prototypes or components of an experimental setup + Perform analyses ranging from classical textbook methods and 1D spreadsheet calculations to Finite Element Analysis (FEA) simulations to predict structural, thermal, and/or fluidic behavior of systems/components. + Document and communicate assumptions, inputs and proposed solutions to multidisciplinary teams for review + Prepare presentations and slides to communicate ideas and/or progress on projects + Ability to work well in with Integrated Product Teams to create and verify novel design solutions that meet established program objectives and requirements (technical, cost, schedule) **Required Qualifications** + Bachelor's Degree in Mechanical or Aerospace Engineering from an accredited college or university + 1+ years engineering experience, including internships, with experience in High Speed propulsion industry + This role requires use of technical data subject to U.S. Government contract restrictions and this posting is only for U.S. Citizens. GE will require proof of status. **Desired Characteristics** + Strong understanding of engineering principles and applying them to technical tasks + Demonstrated ability to analyze and resolve problems + Skilled with Microsoft Office Suite, specifically Excel and PowerPoint + Skilled in mechanical design using 3D CAD Siemens NX or equivalent + Experience with Finite Element Analysis (FEA) and performing simulations in ANSYS for thermal-structural analysis + Understanding of compressible flow + Knowledge of manufacturing processes including Additive Manufacturing (AM) + Problem solver: analytical-minded, challenges existing processes, critical thinker + Ability to obtain and maintain a DoD Security Clearance The base pay range for this position is $81,200 - $101,500. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on December 11th, 2025. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.