Computer aided design designer jobs in Edinburg, TX

Employment Type: Full-Time Salary Range: $60,000 - $65,000 Schedule: Monday-Friday, 7:00 AM - 3:30 PM About the Role LHH is partnering with an innovative electrical aviation firm to find a skilled Mechanical Designer. This position focuses on designing metal enclosures for electrical and electronic components used in advanced aviation power systems. The ideal candidate will have strong proficiency in SolidWorks and experience creating manufacturing-ready designs for precision applications. Key Responsibilities Design and develop metal enclosures for electrical/electronic assemblies. Create detailed 3D models and technical drawings using SolidWorks. Collaborate with engineering teams to ensure designs meet functional and safety requirements. Prepare documentation for manufacturing and quality assurance. Support continuous improvement initiatives in design processes. Qualifications Experience: At least two years experience in mechanical design for electrical/electronic systems (NOT architectural design). Software Skills: SolidWorks and Adobe Acrobat proficiency required. Technical Knowledge: Understanding of materials, tolerances, and manufacturing processes for metal components. Strong attention to detail and ability to work independently. Must be US Citizen or Greencard holder Why Join Us? This is an opportunity to contribute to cutting-edge aviation technology in a collaborative environment. You'll work on projects that power critical systems for aerospace and defense applications.

Job Title: Senior Drafter Salary: $65,000 - $85,000 We're looking for a seasoned Senior Drafter with deep experience in steel and metal structural design. In this onsite daily role, you'll take the lead in reviewing and checking detailed fabrication and structural drawings to ensure they meet industry standards and reflect accurate design intent. You'll also contribute to drafting and modeling tasks involving complex steel and metal structures like monopoles, utility components, platforms, and custom fabrications. This role is ideal for someone who has spent over two decades in detailing and checking, and who brings both the technical knowledge and practical insight needed to support high-quality, shop-ready structural drawings. Key Responsibilities: Review and check engineering drawings for steel and metal structures for accuracy, completeness, and conformance with internal and industry standards. Poles and utility structures desired. Verify weld symbols, material specifications, tolerances, dimensions, and fabrication details for constructability and compliance. Work directly with engineers and drafters to resolve drawing discrepancies and ensure design intent is properly captured. Perform 2D drafting and 3D modeling in Solidworks, with an emphasis on fabrication-ready deliverables. Interpret redlines, sketches, and markups to ensure revisions are accurately incorporated. Maintain drawing control, document revisions, and enforce version management standards. Support the development and continuous improvement of internal drafting/checking processes, templates, and standards. Ensure final drawing packages are suitable for shop fabrication, vendor review, and field installation. Required Qualifications: 8+ years of detailing and checking experience with a strong focus on steel and metal structures. Poles, telecommunications, power, and utility structures desired. Associate degree or technical diploma in Drafting, Engineering Technology, or a related field. Proficiency in Solidworks and drawing management systems. Strong working knowledge of structural steel design, metal fabrication methods, and Geometric Dimensioning and Tolerancing (GD&T). Familiarity with relevant structural standards (e.g., AISC, AWS) and shop detailing practices. Excellent attention to detail and ability to identify inconsistencies, errors, or missing information in drawings. Strong communication skills and the ability to work in a collaborative, fast-paced environment. Benefits: PTO, Medical/Dental/Vision benefits, Life Insurance, and Short Term/Long Term disability insurance.

Korn Ferry has partnered with an industry-leading manufacturer & fabricator to identify an Architectural Designer to join their growing Dallas Team. The Architectural Designer will apply their design expertise alongside a strong understanding of outdoor functionality, aesthetics, and design to develop safe, durable, and sustainable shade solutions. This role focuses on designing shade systems for public spaces, recreational areas, and outdoor commercial properties. Desired Skillset and Duties Develop conceptual layouts, 3D models, and design presentations Draft fabric structures, steel frames, foundations, and details using AutoCAD Proficiency in AutoCAD, Lesser Adobe Creative Suite (Photoshop, Illustrator, InDesign) Prepare renderings, visualizations, and color/material presentations Assist with site plan integration, elevations, and section drawings Support technical submittals including final design packages, cut sheets, and connection details Collaborate with project managers, engineers, and sales teams to meet client goals Working knowledge of other software, 3D modeling, and rendering skills is a plus. Basic understanding of structural concepts and materials (especially steel, and fabric) Exposure to construction documents or design-build project workflows Education and Experience Degree in Architecture, Landscape Architecture, Industrial Design (with more construction experience), or related field 1-3 years of professional design experience (architectural, landscape, or industrial design background) Bonus: Experience with shade structures, fabric architecture, or tensile membranes SE: 510772032

NEW POWER SUPPLY DESIGN ENGINEER - MAGNETIC DESIGN VACANCY IN DALLAS, TEXAS Custom magnetic design, electronic circuit design, PCBs, EMI chokes, inductors, transformers. Dallas, Texas - Hybrid work patter up to $140,000 per annum + benefits! Join a team with nearly 10,000 employees and operate in 20+ countries. If you have experience with magnetic design for power electronic related technology, this is the job for you. We have an incredibly exciting opportunity to work for a real market leader in electronic components. You'll design products and systems used in critical automotive and medical technology used today. What will you get the opportunity to work on? Design custom magnetics including inductors, transformers, and EMI chokes Develop electronic circuits, and PCBs for prototype evaluation Collaborate with semiconductor teams on power reference designs Work with global engineering and manufacturing teams to launch new products What You'll Bring: Experience in power electronics (design, development, test, simulation). Previous experience with magnetic design, ideally from scratch. Electrical / Electronic design skills (circuit design, PCB development) Experience with ANSYS Maxwell or MATLAB is a plus Knowledge of electronic components and standard lab equipment If you're a Power Electronics Engineer / Power Supply Design Engineer looking for a high-impact role in Dallas, TX, this opportunity offers growth, innovation, and the chance to influence next-generation power technologies. Apply here to begin your application process.

Houston, TX 77015 Our client is looking a add a Revit Drafter to their CAD Department. In this position you will make detailed manual or computer drawings of modular buildings from sketches and specifications conceived by engineers and designers. The finished drawings are used as working plans for engineering and manufacturing purposes. Depending on experience and level of responsibility, duties may vary from preparing basic drawings to modifying the finished design using computer aided design equipment. ESSENTIAL FUNCTIONS: To enter this area of work you should be able to: Work within precise limits or standards of accuracy Concentrate for long periods of time Visualize 3-dimensional objects from drawings or pictures See detail in objects or drawings REQUIREMENTS: Ability to work with a team or independently, with little supervision Ability to handle several jobs at one time Ability to read blueprints, including schematics. Possess problem-solving skills, basic mathematical skills & advanced computer skills Good organization and communication skills, both written and oral. Knowledgeable to Proficient in Revit MEP 2018 & newer version Knowledgeable with AutoCAD software Experience in any of the following areas: Electrical, Mechanical (HVAC), Plumbing, Construction experience QUALIFICATIONS: High School Diploma required, a bachelor's degree, a plus Revit Certification 1+ years construction related experience We are an equal opportunity employer, and we are an organization that values diversity. We welcome applications from all qualified candidates, including minorities and persons with disabilities. req24-00554

Mechanical Engineer Houston, Texas $90,000 - $110,000 + Training + Progression + Annual Bonus + Fantastic Benefits Package Excellent role on offer for an ambitious mechanical engineer who is looking to join a dynamic, expanding engineering firm where you will work on high-profile, exciting projects with a company that will support your growth and put you through your PE license. Are you a mechanical engineer with experience in MEP? Are you looking to join a company that is going to provide you full support to gain your PE license? This well-established engineering firm is one of the most exciting design consultancies in Texas. They are a highly prestigious firm specializing in commercial MEP projects. Their employees have always been at the forefront of the business, and they have gained an outstanding reputation for developing and promoting from within. Due to growth, they are now looking to recruit a mechanical designer to develop and work within their well-established design team. This position is office-based. You will be responsible for working on several projects simultaneously, collaborating with the senior engineer, and assisting working on designs. You will receive a structured progression plan from the day you join, outlining your path toward management. This is an exciting opportunity for an ambitious mechanical engineer to join a rapidly expanding business offering clear progression into a Department Manager role. This position would suit someone with MEP experience who is looking to advance into management. The Role: • Mechanical Design Engineer • Office-based position • Collaborating with Project Management teams and clients on plans and designs The Person: • Experience with Revit / MEP • Desire for structured training and progression • Desire to gain your PE license

Plant Design & Piping Engineer Houston, TX 77001 3 Month Contract In this role, you will plan, develop, and review Plant Design & Piping (PD&P) work, produce drawings and documentation, and prepare design estimates for a project. You will coordinate with clients, facilitate technical discussions, and review and approve drawings, calculations, and bid summaries. You will solve complex technical issues and ensure PD&P designs comply with all regulations and standards. Responsibilities Plans, develops, coordinates and reviews design work within a small-size PD&P design work group on projects of medium size or assignments in support of global business unit Produces drawings and documentation in accordance with established design and scope including design of earthwork, drainage, road design, foundation, and steel detailing Ensures PD&P systems designs comply with all applicable installation codes, regulations, and standards Coordinates and interfaces as directed with the day-to-day technical work of PD&P engineers, scientists, specialists, designers and drafters Communicates complex technical issues and recommends solutions to upper management Facilitates technical discussions with third parties (client, suppliers, regulators) Prepares or oversees the preparation of PD&P design estimates and work plan in accordance with project scope, schedule and budget, and manages implementation and performance accordingly Develops Engineering Department Procedures (EDPs), design guides, appropriate Company Standard Computer Applications and administrative practices Coordinates with client representatives as delegated to obtain approval on phases of work Reviews key PD&P engineering drawings and calculations and bid summaries Mentors PD&P designers and drafters by providing appropriate on-the-job training for their professional development Required Requires bachelor's degree (or international equivalent) and 8-10 years of relevant experience or 12-14 years of relevant work experience Sound knowledge of CAD design and drafting techniques, engineering drawings, graphic arts, reading of drawings, and reproduction methods used by the discipline Advanced experience in the use of 3d Modeling tools; AutoCAD Revit and Navisworks Experience developing, managing, and maintaining BIM models with defined LOD specifications (LOD 100-500) for the engineering discipline of Plant Design and Piping Experience with 3d-modeling of complex piping systems, pipe supports, and modeling of mechanical equipment for a large industrial manufacturing facility (semiconductor fabs or data centers) project Previous modularization, OSM, modular piping design project execution experience Experience with multi discipline interface management and global 3D model oversight. Expertise in reading, interpreting, and using related documents and drawings prepared by other project groups Excellent listening, oral and written communication, planning, and organizational skills are essential Must be authorized to live and work in the US without sponsorship Willingness to travel and/or relocate to jobsite in support of projects

Job Title: Mechanical Design Engineer Type: Full-Time permanent role with Capgemini About the job you're considering We are seeking an experienced Mechanical Engineer to join our team developing automated mobile heavy equipment that removes humans from the dull, dirty, and dangerous jobs. In this role, you will take ownership of complex mechanical designs, lead cross-functional efforts, and drive the development of safe and reliable automation systems. Your role Own the end-to-end design of major subsystems and ensure successful integration into full systems. Lead cross-functional design reviews, making trade-off decisions between mechanical, electrical, and software requirements. Drive validation at the system level, ensuring performance, reliability, and safety standards are met. Guide design standards, best practices, and process improvements for the mechanical engineering function. Collaborate directly with customers, product management, and suppliers on high-impact initiatives. Mentor and develop junior and mid-level engineers, fostering a culture of technical excellence. Your skills and experience Bachelor's or master's in mechanical engineering (Master's preferred). Deep expertise in CAD software (On shape, SolidWorks, Creo, or similar), including advanced assemblies and design-for-manufacturing practices. Advanced experience in mechanical design and system integration, ideally in automation, robotics, or heavy equipment. Strong record of delivering complex systems from concept to production. Strong understanding of pneumatic and hydraulic systems Deep understanding of Stress/strain (FEA) and vibration analysis is preferred Demonstrated expertise in design-for-manufacturing, prototyping, and testing at scale. Proven ability to influence technical direction and manage competing requirements across disciplines. Life at Capgemini Capgemini supports all aspects of your well-being throughout the changing stages of your life and career. For eligible employees, we offer: · Flexible work · Healthcare including dental, vision, mental health, and well-being programs. · Financial well-being programs such as 401(k) and Employee Share Ownership Plan · Paid time off and paid holidays. · Paid parental leave. · Family building benefits like adoption assistance, surrogacy, and cryopreservation · Social well-being benefits like subsidized back-up child/elder care and tutoring. · Mentoring, coaching, and learning programs · Employee Resource Groups · Disaster Relief About Capgemini Engineering World leader in engineering and R&D services, Capgemini Engineering combines its broad industry knowledge and cutting-edge technologies in digital and software to support the convergence of the physical and digital worlds. Coupled with the capabilities of the rest of the Group, it helps clients to accelerate their journey towards Intelligent Industry. Capgemini Engineering has more than 55,000 engineer and scientist team members in over 30 countries across sectors including Aeronautics, Space, Defence, Naval, Automotive, Rail, Infrastructure & Transportation, Energy, Utilities & Chemicals, Life Sciences, Communications, Semiconductor & Electronics, Industrial & Consumer, Software & Internet. Capgemini Engineering is an integral part of the Capgemini Group, a global leader in partnering with companies to transform and manage their business by harnessing the power of technology. The Group is guided every day by its purpose of unleashing human energy through technology for an inclusive and sustainable future. It is a responsible and diverse organization of over 360,000 team members in more than 50 countries. With its strong 55-year heritage and deep industry expertise, Capgemini is trusted by its clients to address the entire breadth of their business needs, from strategy and design to operations, fueled by the fast evolving and innovative world of cloud, data, AI, connectivity, software, digital engineering and platforms. The Group reported in 2022 global revenues of €22 billion. Get the Future You Want | ***************** Disclaimer Capgemini is an Equal Opportunity Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, national origin, gender identity/expression, age, religion, disability, sexual orientation, genetics, veteran status, marital status or any other characteristic protected by law. This is a general description of the Duties, Responsibilities and Qualifications required for this position. Physical, mental, sensory or environmental demands may be referenced in an attempt to communicate the manner in which this position traditionally is performed. Whenever necessary to provide individuals with disabilities an equal employment opportunity, Capgemini will consider reasonable accommodations that might involve varying job requirements and/or changing the way this job is performed, provided that such accommodations do not pose an undue hardship. Capgemini is committed to providing reasonable accommodations during our recruitment process. If you need assistance or accommodation, please reach out to your recruiting contact. Click the following link for more information on your rights as an Applicant http://*****************/resources/equal-employment-opportunity-is-the-law Applicants for employment in the US must have valid work authorization that does not now and/or will not in the future require sponsorship of a visa for employment authorization in the US by Capgemini. Please be aware that Capgemini may capture your image (video or screenshot) during the interview process and that image may be used for verification, including during the hiring and onboarding process.

About Us Stubbs Engineering is a leading Structural Engineering Firm known for its innovative designs and dedication to excellence. Focused on creating sustainable and efficient building solutions, we are proud to be at the forefront of the industry. We are currently seeking passionate and skilled drafting technicians to join our professional team. This is an exciting opportunity to contribute to impactful projects as a Drafting Technician in our El Paso, TX office. About You As a drafting technician, you will play a key role in a collaborative team focused on the structural design of buildings. Working under general supervision, you will prepare a variety of construction documents, including foundation plans, framing plans, and detailed drawings. Your contributions will be critical in ensuring documents are accurate and complete, as you work closely with engineers to bring designs to life. Core responsibilities include: Perform drafting and modeling tasks using AutoCAD and Revit with precision and attention to detail. Collaborate with engineers and design team members to translate concepts into detailed drawings and models. Ensure all drafting work complies with industry standards, codes, and project requirements. Create and revise construction documents, including plans, sections, and details. Organize and manage project documentation to ensure accurate and up-to-date records. Conduct quality checks on drafted documents to ensure accuracy and consistency. Education Associate degree in Drafting, nearing completion, or equivalent relevant work experience. A certificate in Drafting from a technical school may also be considered. Relevant coursework or drafting experience gained during high school will also be taken into account. Skills & Experience Technical Proficiency: Strong skills in using drafting software such as AutoCAD and Revit are essential. Attention to Detail: Ability to produce precise and accurate drawings and models. Communication Skills: Effective communication with engineers and other team members to understand project requirements and convey technical information. Time Management: Ability to manage multiple projects and meet deadlines efficiently. Continuous Learning: Willingness to stay updated with new technologies and advancements in drafting techniques. Software Proficiency As a modern engineering firm, we utilize a variety of software tools to enhance our productivity and service delivery. For this role, proficiency in the following software is highly beneficial. Revit AutoCAD Bluebeam Asana Microsoft Office Suite Benefits Include Competitive salary based on experience. Profit sharing plan. Retirement plan with employer match. Vacation and sick leave allowances. Employee health plan. Professional development training and growth opportunities. Physical Demands This role requires the regular use of hands and fingers to operate a computer keyboard, as well as occasional visits to job sites that may involve navigating through rough terrain and climbing ladders. Reasonable accommodation can be made for individuals with disabilities. Stubbs Engineering values diversity and provides equal employment opportunities to all individuals regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

A leading Western apparel brand is seeking a skilled Apparel Technical Designer to support and elevate their growing menswear and womenswear categories. This role is highly collaborative and hands-on, working closely with design, production, and global vendors to bring concepts to life with accuracy, quality, and consistency. Ideal for a Technical Designer ready for growth or a Senior Technical Designer looking to influence processes, improve standards, and mentor others. About the Role: The Technical Designer will be responsible for driving fit consistency, garment engineering, and technical execution across multiple product lines. This position plays a key role in product development, fittings, vendor communication, and maintaining high-quality standards throughout the production cycle. Key Responsibilities: Translate design concepts into detailed tech packs, specifications, and graded measurements Build, maintain, and evolve fit blocks, grading standards, and technical libraries Lead fittings on mannequins and live models; provide clear fit direction and technical adjustments Ensure accuracy in construction details, patterns, and fit to reduce sample iterations Partner with cross-functional teams and overseas vendors to meet production milestones Manage seasonal calendars, WIPs, timelines, samples, and approvals Support vendor visits and occasional international travel Contribute to process improvements and adoption of new technologies Required Qualifications: Strong expertise in garment construction, fit, and patternmaking Proficiency with Gerber AccuMark (required) Experience across menswear and womenswear, including knits and wovens Proven experience creating tech packs, specs, and graded measurement charts Strong skills in Adobe Illustrator, Microsoft Office, and PLM systems Excellent communication, organization, and project management abilities Bachelor's degree in Fashion Design, Apparel Design, or related field Preferred Qualifications: Experience with Centric PLM Experience with Clo3D

Project & Design Engineer (ABG) American Bath Group (ABG) is a leading manufacturer of high-quality bathing products, dedicated to innovation, craftsmanship, and customer satisfaction. With a strong portfolio of trusted brands, we provide tubs, showers, and bathware solutions designed for both residential and commercial applications. At ABG, our mission is simple: to make a positive impact on people's lives. Guided by our values of Integrity, Transparency, and Servant Leadership, we are committed to excellence, safety, and sustainability-while creating rewarding career paths in the manufacturing industry. Position Summary Reporting to the Director of Product Management & Engineering, the Project & Design Engineer - Bathware will be a key member of ABG's shared product development team. This position is ideal for someone who started as a CAD expert (2-5 years) and is now ready to grow into a broader engineering and project management role. During the first 180 days, the Project & Design Engineer will manage smaller sub-projects while still owning the CAD stage, and over time, will take on full end-to-end project ownership-from concept to launch. This role requires an innovative thinker who thrives on solving design challenges, driving collaboration, and seeing projects through to completion. Primary Responsibilities Develop and manage new bathware product designs for multiple channels in North America while maintaining brand standards and market positioning. Oversee product development from concept through launch, managing CAD, supplier coordination, prototype development, and handoff to commercial teams. Create 2D and 3D design data (sketches, renderings, CAD models, photo-realistic visualizations) for internal and external use. Participate in Voice of Customer research and industry events to understand market trends and user needs. Collaborate with Product Development, Industrial Design, and Manufacturing teams to align on design feasibility and project timelines. Support implementation of new design tools, processes, and innovation methods that enhance product development. Contribute to process improvement in Design for Manufacturability (DFM), FMEA, and stage-gate product development methodologies. Partner with manufacturing personnel, negotiate with suppliers, and participate in product validation efforts. Assist with the setup of BOMs, ECNs/ECRs, and PDM/PLM documentation as part of project management. Cultural Fit Comfortable working in dynamic, undefined environments with multiple concurrent projects. Hands-on leader who collaborates well with floor personnel, engineers, and cross-functional stakeholders. Communicates openly, transparently, and confidently with all levels of the organization. Driven to start, finish, and deliver-a self-starter who sees projects through completion. Must-Have Qualifications CAD Proficiency: Solid 3D and surface modeling experience in SolidWorks or equivalent. Self-Starter & Finisher: Proven ability to take initiative, work independently, and close out projects. Engineering Degree: Bachelor's in Industrial Design, Mechanical Engineering, or equivalent technical field. Nice-to-Have Qualifications Bathware or plumbing product design experience. Knowledge of composite manufacturing and mold/tooling design. Experience with BOM setup, ECN/ECR processes, and PDM/PLM archival systems. Education & Experience 5-10 years of experience in industrial or product design. 2-3 years of project management experience, preferably with stage-gate or structured product launch processes. Familiarity with bathware industry standards and certifications (CSA, ICC, IAPMO, FHA, ADA). Understanding of Design for Manufacturability, FMEA, and risk management methods. Experience with FEA tools a plus. Availability to travel up to 10% as needed. Why You'll Love Working Here As a Project & Design Engineer - Bathware, you'll play a direct role in shaping innovative products that define the future of ABG's brands. You'll join a collaborative, cross-functional team that values creativity, precision, and accountability-while working in a fast-paced environment that rewards initiative and ownership. Equal Opportunity Employer Statement American Bath Group (ABG) provides equal employment opportunities to all employees and applicants and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Bauer Foundation Corp. (BFC) is a Florida corporation and the U.S. subsidiary of the world-wide operating Bauer Group based in Schrobenhausen, Germany. The Bauer Group is a world- renowned foundation contractor, designer, and builder of the world's finest foundation equipment. BFC, as part of the Bauer construction division, is a leader in the execution of complex excavation pits, ground improvement, deep foundations, and vertical seals, utilizing the most up to date equipment and installation techniques. Bauer Foundation Corp. provides all types of foundation solutions and services for industrial, commercial, residential, and governmental construction projects. Bauer Foundation Corp. promotes Bauer services and technology throughout the entire United States. BFC is looking for a dynamic individual with experience as a Ground Improvement Design Engineer, in the special foundation industry. If you have a passion for progress, we want to hear from you! Position: Design Engineer Reports to: Chief Engineer Location: The Woodlands, TX (or Odessa, FL) - this is an ON SITE position Schedule: 8a-5p M-F Relocation available for the right candidate! The Design Engineer supports the business during all project phases (pre-construction, execution, close-out) with engineering services. The employee works under the guidance of Chief Engineer and Ground Improvement Manager and utilizes the CAD Technician. Responsibilities: • Design/value engineering of foundations systems: o Design/VE of ground improvement (aggregate piers, vibro-compaction, vibro-replacement, rigid inclusions) • Maintenance of geotechnical report database/repository • Review of load test data/modulus test data and maintenance of load test database/repository • Perform QC of ground improvement installation • Support project teams in the preparation of pre-construction and close-out submittals • Lead preparation of shop drawings • Lead preparation of as-built drawings Requirements of this Positions: • Applicants should have a Bachelor's degree in Civil or Geotechnical Engineering. • A minimum of 2 years experience in geotechnical or foundation structural design preferably in the design of Ground Improvement (aggregate piers, vibro-compaction, vibro-replacement, rigid inclusions). • Must be authorized to work in the US. • Preference will be given to candidates with P.E. license, Master's degree and experience in geo-structural design. Expectations include: • Knowledge of Microsoft Office and AutoCAD products. • A strong work ethic and dedication to your own professional growth. • Conscientious work habits that include attention to detail, clear documentation, and communication skills • Respectful team player who demonstrates a commitment to aiding the development of people around you. • A willingness to accept and implement constructive feedback from managers within the company. • Ethical behavior at all times. Compensation and benefits: Competitive salary; commensurate with experience. Benefit packages available - health insurance, life insurance, short-term disability, 401(k) plan with employer match, paid holidays and vacation, paid parental leave, and tuition assistance Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor an employment Visa at this time. BAUER Foundation Corp. is a DFWP and an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

🚀 We're Hiring: CAD Drafter Do you love bringing ideas to life in 3D? Do you get a thrill from turning sharp, clean models into fabrication-ready drawings? If so, we want to meet you. We're looking for an experienced 3D Autodesk Inventor Draftor who's ready to jump into hands-on projects, collaborate with Mechanical Engineers, and help us deliver high-quality, build-to-print designs for our customers. 🔧 What You'll Do Modify existing or create brand-new 3D models in Autodesk Inventor Generate detailed 2D fabrication drawings (your shop drawings will really matter here!) Apply weld callouts, design sheet metal components, and convert formed parts to flat layouts Work closely with our engineering team to meet project requirements and deadlines ⭐ What You Bring Strong Autodesk Inventor skills Solid understanding of sheet metal design and fabrication Clear communication and a true team-player mindset Technical confidence and attention to detail If you're someone who loves turning concepts into precise, buildable reality-and enjoys being part of a collaborative engineering team-we'd love to hear from you!

Collabera is ranked amongst the top 10 Information Technology (IT) staffing firms in the U.S., with more than $525 million in sales revenue and a global presence that represents approximately 12,000+ professionals across North America (U.S., Canada), Asia Pacific (India, Philippines, Singapore, Malaysia), and Europe (Ireland, Netherlands, Poland, United Kingdom). We support our clients with a strong recruitment model and a sincere commitment to their success, which is why more than 75% of our clients rank us amongst their top three staffing suppliers. Not only are we committed to meeting and exceeding our customer's needs, but also are committed to our employees' satisfaction as well. We believe our employees are the cornerstone of our success and we make every effort to ensure their satisfaction throughout their tenure with Collabera. As a result of these efforts, we have been recognized by Staffing Industry Analysts (SIA) as the “Best Staffing Firm to Work For” for five consecutive years since 2012. Collabera has over 50 offices across the globe with a presence in ten countries and provides staff augmentation, managed services and direct placement services to global 2000 corporations. For consultants and employees, Collabera offers an enriching experience that promotes career growth and lifelong learning. Visit ***************** to learn more about our latest job openings. Awards and Recognitions --Staffing Industry Analysts: Best Staffing Firm to Work For (2016, 2015, 2014, 2013, 2012) --Staffing Industry Analysts: Largest U.S. Staffing Firms (2016, 2015, 2014, 2013) --Staffing Industry Analysts: Largest Minority Owned IT Staffing Firm in the US. Position Details: Job Title: Technical Leader Domain Expert Gasification Technology or Design Engineering / Application Engineering -- Chemical Process Engineering and Component Design Location: Houston, TX, 77041 Duration: 12+ months (Possibilities of extension) Job Description: · The Technical Leader, Domain Expertise, will provide Technical Leadership and mentorship in various sections or systems of the overall gasification Process for Gasification Chemical Process Engineers. · In this role you will be responsible for process design of the gasification and the development of the gasification subsystems. · The respective candidate will also have the ability to review all the process design documents, such as; PFD, PID & PDS, including extended scope for PDP/PIPs. · You will function as a Technical Integration Leader for such projects and lead and coordinate project execution of global Client and JV teams in USA, India and China. · Communicate with customers, users, Licensees, EPC, Design Institutes and internal Client Product Line, Commercial and Sales Review and develop process design documents, such as; PFD, PID & PDS, etc. · Develop sizing of key process equipment including vessels, tanks, heat exchangers, pumps and other miscellaneous equipment. · Develop sizing tools and criteria of key process plant equipment. · Develop and optimize process configurations based upon project requirements, including water cycles required for overall chemical plant integration. · Provide proposal support for Feasibility Studies, PDP (Process Design Package), PIP (Process Information Package), FEED (Front End Engineering Design), PS (Product Supply) and EPC (Engineering Procurement and Construction) quotes for Gasification projects for SOH (Scrubber Over Head) Licensing, IGCC (Integrated Gasification Combined Cycle, PolyGen and Chemical Applications. · Extensive Gasification experience including historical gasification development and Client specific Gasification plant commissioning, start-up and system issue resolution knowledge. · 20 year experience or more than 15 year experience in a Technical leadership position with Process Systems Engineering · Design Engineering / Application Engineering -- Chemical Process Engineering and Component Design Additional Information To know more or discuss regarding this opportunity, please contact: Ujjwal Mane ************ ****************************

ICON is seeking an Element Design and Application Engineer to lead the development of digital design assets and tools used to design with ICON's next generation design-to-print design platform, Codex. This role serves as the primary technical liason between Building and Construction Science team and Software teams to establish the digital architecture that translates building designs from industry-standard design tools into ICON's technology environment to support the design, printing, and construction of 3D printed buildings. In this role, you will be responsible for development of the foundational component library, parametric-design framework and integration systems that form the core components of the Codex Platform. Working closely with our Software team, you will develop digital design components and integration systems that enable seamless translation from architectural design to 3D printed construction. This position requires expertise in both construction science and digital design systems to transform how architectural design translates to automated construction workflows. This role is based on site at our Austin, TX HQ Campus and reports to the Senior Director of Building Performance & Regulatory. RESPONSIBILITIES: Lead development of standardized digital design components and parametric building element libraries and define the enhanced BIM standards and data structures that enable automated design validation and construction planning for each digital design component. Create and manage Revit families (or similar industry standard BIM platform elements) and BIM components that contain all necessary data for 3D printable systems and construction execution. Establish component interaction rules, constraints, and dependency frameworks for seamless design-to-print workflows Support the software team in providing feedback on workflows for architects and engineers working within the CODEX platform and gather feedback from internal and external users to continuously improve digital tools and processes. Support training and adoption of ICON's digital design tools across ICON teams and external partners and provide troubleshooting support as needed. Serve as primary technical liaison between Building+ Construction Science engineering, software, and print teams by gathering and translating technical requirements from across the departments into actionable digital component specifications. Coordinate and support the validation processes for digital assets and automated design translation workflows Support the development of frameworks that translate industry-standard architectural designs into ICON's technology environment Establish quality assurance protocols and validation procedures for the implementation of the design elements and software. Collaborate with the Software team to establish standards, protocols and data architectures to integrate design requirements into digital platforms and automated systems for design-to-construction integration. MINIMUM QUALIFICATIONS: Bachelor's degree in Architecture, Architectural Engineering, or related field with strong technical focus. 5+ years of experience in architectural design and construction, with demonstrated expertise in building systems and construction methods. Advanced proficiency in Revit, AutoCAD, and other BIM software with experience creating and managing complex architectural families. Strong understanding of construction and design industry practices including structural systems, architectural design, and construction sequencing. Experience with productization of construction elements and translating design concepts into reproducible components. Proven project management skills with ability to coordinate technical initiatives across multiple stakeholders. Construction technology experience with understanding of advanced manufacturing or prefabrication methods. Experience with 3D printing, robotics, or advanced manufacturing technologies in construction applications. Background in construction technology development or innovation in building systems. Software development experience or familiarity with database design. ICON is an equal opportunity employer committed to fostering an innovative, inclusive, diverse and discrimination-free work environment. Employment with ICON is based on merit, competence, and qualifications. It is our policy to administer all personnel actions, including recruiting, hiring, training, and promoting employees, without regard to race, color, religion, gender, sexual orientation, gender identity, national origin or ancestry, age, disability, marital status, veteran status, or any other legally protected classification in accordance with applicable federal and state laws. Consistent with the obligations of these laws, ICON will make reasonable accommodations for qualified individuals with disabilities. Furthermore, as a federal government contractor, the Company maintains an affirmative action program which furthers its commitment and complies with recordkeeping and reporting requirements under certain federal civil rights laws and regulations, including Executive Order 11246, Section 503 of the Rehabilitation Act of 1973 (as amended) and the Vietnam Era Veterans' Readjustment Assistance Act of 1974 (as amended). Headhunters and recruitment agencies may not submit candidates through this application. ICON does not accept unsolicited headhunter and agency submissions for candidates and will not pay fees to any third-party agency without a prior agreement with ICON. As part of our compliance with these obligations, the Company invites you to voluntarily self-identify as set forth below. Provision of such information is entirely voluntary and a decision to provide or not provide such information will not have any effect on your employment or subject you to any adverse treatment. Any and all information provided will be considered confidential, will be kept separate from your application and/or personnel file, and will only be used in accordance with applicable laws, orders and regulations, including those that require the information to be summarized and reported to the federal government for civil rights enforcement purposes. Internet Applicant Employment Notices

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world's most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit *********** Summary of Role: To be a part of the US Application Engineering team, providing excellent technical customer support for GF technologies, focused on Power Management applications, leading to successful tape-outs. Essential Responsibilities: Cultivate long-term, strategic partnerships and alignment with GF customers to generate growing demand for our differentiated solutions Meet with GF customers to collect or better understand technical requests and issues gating design Provide application engineering solutions to solve complex design issues and ensure the customer's success Analyze customer requirements for application of GF's products Work independently under minimal supervision Routinely report status of projects and address design gating issues with urgency Advocate for customer to our internal development organizations to improve and enhance the GF's enablement solutions, technologies and business processes Resolve customer technical issues through GF's case system Support GF teams in creating or maintaining technical customer-facing documents Routinely coordinate and participate with GF teams to drive technical development, continuous improvement, cost reduction or productivity improvement Travel - Up to 10%, as needed Other Responsibilities: Be a company-wide subject matter expert in circuit design, applications or enablement, and able to guide or mentor peers on GF solutions or issue resolution Solve complex problems and bring innovation to problem-solving Represent the Application Engineering team within GF or in customer-related engagements Generate documents to facilitate customer issue resolution and internal business process introduction or improvements Perform all activities in a safe and responsible manner and support all Compliance, Environmental, Health, Safety & Security requirements and programs at GF Work and collaborate on other projects and assignments, as needed Required Qualifications: Bachelor's in Electrical or Computer Engineering or related field with 6+ years in semiconductor manufacturing, design or enablement Experience with circuit design environment, tools & methodologies Experience Power Management technology, application, design, PDK or design tools & methodologies Experience with Linux, shell scripting, SVRF, TCL, Python or other automation languages & environment Consistent performance and professionalism Skilled with Microsoft tools (e.g. Office, Outlook, SharePoint, MS-Dynamics, etc.) Strong communication skills Strong planning & organizational skill Fluency in English Language - written & verbal Preferred Qualifications: Master's in Electrical, Computer Engineering or related field with 7+ years in semiconductor manufacturing, design, or enablement; or PhD in Electrical, Computer Engineering or related field with 5+ years in semiconductor manufacturing, design or enablement Publication of design, application or design enablement documents in previous roles Experience with modeling, ESD, latch-up Experience with Booleans and design rules Experience with physical design, DRC, DFM Familiarity with device physics Familiarity with the tape-out process Familiarity with PCMs, process KPIs Familiarity with silicon manufacturing Project management Sales or Customer interface Cross-functional project leadership/participation Expected Salary Range $94,300.00 - $231,600.00 The exact Salary will be determined based on qualifications, experience and location. If you need a reasonable accommodation for any part of the employment process, please contact us by email at usaccommodations@gf.com and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. An offer with GlobalFoundries is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations. GlobalFoundries is fully committed to equal opportunity in the workplace and believes that cultural diversity within the company enhances its business potential. GlobalFoundries goal of excellence in business necessitates the attraction and retention of highly qualified people. Artificial barriers and stereotypic biases detract from this objective and may be illegally discriminatory. All policies and processes which pertain to employees including recruitment, selection, training, utilization, promotion, compensation, benefits, extracurricular programs, and termination are created and implemented without regard to age, ethnicity, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, sexual orientation, gender identity or expression, veteran status, or any other characteristic or category specified by local, state or federal law

Job Details:Job Description: About Altera: Accelerating Innovators - Altera provides leadership programmable solutions that are easy to use and deploy, across the cloud to the edge, enabling limitless possibilities for AI. Our broad portfolio includes FPGAs, SoCs, CPLDs, IP, development tools, system-on-modules, SmartNICs and IPUs, offering the flexibility to accelerate innovation. Our innovation in programmable logic began in 1983. Since then we've delivered the tools and technologies that empower customers to innovate, differentiate, and succeed in their markets. Join us on our journey to becoming the world's #1 FPGA company! About the Role: Altera is leading the way to transform how we design FPGAs. In this position, you will be joining the North American Factory Applications Team as an FPGA Design Applications Engineer specializing in Quartus Software tools and system solutions. You will help revolutionize our customer experience by using new technologies to showcase our software tools and support our customers. A successful candidate is an FPGA designer who has hands-on experience with FPGA design software tools and knows how to design, simulate, and debug FPGA designs. Responsibilities will include but not be limited to: Reviewing product requirements and designing a best-in-class customer journey by identifying assets, use cases, user personas and touchpoints (web, git repository, forums etc.). Developing technical assets such as user guides, application notes, example designs, demos and training that will enable users to successfully design with our products. Reviewing specifications and requirements, performing product evaluations and providing feedback on ease of use. Defining and developing example designs and unit tests and performing checkout to ensure the readiness of feature releases. Responding to customer technical questions, debugging and reproducing customer issues, and driving issue resolution with the engineering organization and customers. Salary Range Our compensation reflects the cost of labor within the US market. Actual salary may vary based on a number of factors including job location, job-related knowledge, skills, experiences, trainings, etc. We also offer incentive opportunities that reward employees based on individual and company performance. $91,800K - $132,900K USD *We use artificial intelligence to screen, assess, or select applicants for the position.* Qualifications: Minimum Qualifications: Bachelor of Science degree in Computer/Electrical Engineering (or related field) with a minimum of 3+ years of related applications engineering or system design experience OR a Master of Science degree in Computer/Electrical Engineering (ore related field) with a minimum of 3+ of related applications engineering or system design experience Experience with FPGA Design Software tools and common third-party simulators Experience with debugging FPGAs Experience with creating FPGA designs using RTL (Verilog, VHDL or SystemVerilog) combined with IP and system software Experience working with FPGA development boards or similar Preferred Qualifications: Experience with Power and Thermal Analysis tools Familiarity with TCL and Python Job Type: RegularShift:Shift 1 (United States of America) Primary Location:Austin, Texas, United StatesAdditional Locations:Posting Statement:All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.

Job DescriptionCAD (SOLIDWORKS) Application Engineer MLC CAD Systems is seeking a CAE/CAD Application Engineer for our Computer-Aided Engineering and Design team. MLC CAD Systems LLC is a Value-Added Reseller (VAR) of SOLIDWORKS (CAD software) the leader in 3D MCAD technology. In addition, we represent Markforged (3D Printers) and Mastercam (CAM Software) providing sales, training, and support for all these products with 40 years of experience serving the industrial, medical, scientific, consumer, educational, technology, and transportation industries. ______________________________________________________________________ LOCATION: Houston Texas ______________________________________________________________________ Position Purpose: Provide pre and post-sales support for SOLIDWORKS, and downstream applications including Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), and Product Data Management (PDM). Primary responsibilities include product demonstrations, competitive overviews, training, and customer service. Duties and Responsibilities of CAD (SOLIDWORKS) Application Engineer: Provide the following for SOLIDWORKS, SOLIDWORKS Simulation, Simulation Flow, Enterprise PDM, SOLIDWORKS Electrical, and other downstream applications. Support pre-sales activities such as customer presentations and demos, and marketing efforts and prepare formal proposals. Provide installation, implementation, and best practices techniques. Conduct standard and custom training. Maintain training hardware and infrastructure, including system backup, hardware upgrades, and general training room setup. Provide phone and web-based troubleshooting. Qualifications of CAD (SOLIDWORKS) Application Engineer: Bachelor's degree in Aerospace or Mechanical Engineering or Technology. Minimum of 1-year of experience in Aerospace or Mechanical Engineering or Design. Strong focus on customer success. Ability to communicate technical information to non-technical audiences. Strong listening, written, and verbal communication skills. The ability to work in a team and independently. Experience with analysis (FEA, CFD) programs (COSMOSWorks, ANSYS, or similar) is a plus. Experience using and implementing PDM programs (Enterprise PDM) is a plus. Bilingual in English/Spanish is a plus. Compensation: Base Salary + Performance Bonus. The compensation plan is highly competitive and commensurate with experience. Benefits: we value our employees and provide full healthcare benefits, company 401k, 401K matching, plus PTO accrual from day one (vacation, holiday time, personal time off) Powered by JazzHR 2BwNep3qLz

Who We Are TEADIT Group is recognized worldwide as a leader in the development and manufacturing of innovative products for critical fluid sealing processes. The wide variety of sealing solutions developed by Teadit have been important tools for many industries including the Refining, Chemical Process, and Power Generation industries. Teadit has helped a number of industries achieve the goal of an emission-free environment within their facilities. Teadit is constantly investing in R & D to keep up with the evolution of the industry's needs. Teadit North America is located in Houston, Texas. Worldwide, we have locations in South America, Europe and Asia. The variety of sealing solutions developed by TEADIT is fundamental in order to achieve the leakage-free goal in the many industries we serve. The quality and effectiveness of these solutions are based on management and innovation, which are the basis for all products manufactured at any Teadit plant. As a result of this continuous process of quality improvement, an ISO 9001 certification was obtained in Brazil, the United States, and Europe. Every Teadit product is developed, manufactured and installed to achieve the goal of ensuring leakage control and environmental preservation. What You'll Do The Application and Design Engineer II is a critical role in the development, design, and testing of new products while also providing advanced technical support to customers. This position requires a deeper level of expertise and autonomy in managing projects, collaborating with cross-functional teams, and influencing product development to align with market needs and industry trends. Specific responsibilities may include: Lead the analysis, development, and recommendation of design approaches to meet production and customer requirements for existing, new, or improved products and/or processes. Conduct research to identify applications, performance criteria, and functional requirements, ensuring that designs meet customer specifications and industry regulations. Develop and evaluate multiple product design solutions, balancing factors such as corporate image, market research, applications engineering, human factors, manufacturing constraints, materials, safety, aesthetics, and cost considerations. Collaborate with cross-functional teams, including Sales, Manufacturing, and Quality, to drive successful product development and implementation. Produce conceptual prototypes and validate designs through engineering calculations, testing, and analysis. Serve as a key technical advisor to customers, providing in-depth engineering support and resolving complex technical inquiries. Develop and deliver training on Teadit products and services, including relevant industry codes and standards. Support and participate in the organization's continual improvement program to conform to ISO 9001:2008 requirements by complying with the Quality Policy and procedures and meeting QMS objectives. Other duties as assigned. What You Bring EDUCATION AND TRAINING • Bachelor's degree in Engineering, or a related technical field. • Experience as described below may be accepted in lieu of education. EXPERIENCE • A minimum of three (3) years of experience in application engineering, engineering design, product development, or related technical roles. • Experience working in an ISO 9001 environment a plus. • Experience with bolted joint assemblies and sealing technologies is a plus. • Education as described above may be accepted in lieu of experience. KNOWLEDGE AND SKILLS • Strong conceptual design skills, including sketching, rendering, and prototype model work utilizing CAD/CAM tools. • Advanced ability to perform engineering calculations to support product design activities. • Proficiency in drafting techniques and symbology. • Strong technical research skills. • Strong organizational skills. • Superior oral, written, and presentation communication skills with the ability to convey complex technical concepts. • Ability to communicate and work well with teams composed of customers and/or other employees of all levels. • Ability to solve practical problems and deal with situations where limited standardization exists. • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. • Ability to formulate and document a high-level plan with input from many functional groups. • Ability to work under pressure of schedules. What We Offer #IND1