Computer aided design designer jobs in Farmington, MN - 201 jobs

Client requirements: Hybrid onsite 3 days/week - Brooklyn Park, MN (must be local to Minneapolis, MN area) W2 hourly (no C2C) Work authorization: US Citizen or GC holder What you'll do: Seeking a CAD contractor to test Low Voltage Control Room Design for refreshing the department areas. CAD Design & Documentation Create and update control room plan sets, applying CAD standards and design conventions Document existing conditions and translate site photos into accurate layouts (e.g., ladder racks, MDF/IDF cabinets, UPS systems, grounding bars). Client out and label equipment including racks, J-boxes, ladder racking, UPS placement, camera locations, and data/voice drops. Produce single-phase and three-phase line diagrams aligned to store requirements. Low Voltage Design Apply TLow Voltage Design Standards, including structured cabling, MDF/IDF requirements, pathways, and device drops. Ensure designs support proper clearances, cable routing, and equipment access. Incorporate store-specific needs (e.g., paging, wireless, voice/data drops, external equipment placements). Partner with engineers, electrical contractors, and deployment teams to refine layouts. Integrate feedback, resolve design conflicts, and uphold documentation quality. Communicate assumptions and constraints clearly to cross-functional teams. Required Skills & Experience 3-5+ years of experience in low-voltage design, telecom room layout, or structured cabling design. Proficiency in Autodesk/Revit or equivalent CAD software. Ability to interpret electrical, architectural, and low-voltage drawings. Familiarity with telecom room components: ladder racking, MDF/IDF cabinets, UPS systems (single & three phase), grounding, and junction boxes. Working knowledge of NEC clearances and structured cabling standards (TIA/BICSI). High attention to detail and ability to translate incomplete information into accurate CAD layouts. Preferred Qualifications Experience designing telecom spaces in large retail or multi-site environments. Understanding of UPS models (e.g., Vertiv EXS, ITA2, GXT units). Exposure to paging, wireless, and voice/data infrastructure design. ITR Group offers a competitive compensation and benefits package, including medical, dental, and 401(k) for eligible employees. The W2 pay range for this type of role is approximately $45.00 - $65.00 per billable hour. This range is an estimate and not a guarantee of compensation. The final rate will be determined by factors such as experience, market trends, and specific job assignments. Discover more about how ITR Group connects top talent with leading client opportunities.

Primoris Gas Operations, which consist of companies such as Q3 Contracting, ARB, Primoris Distribution Services, Snelson and Pipejacking Trenchless, has over 60 years of experience working in the natural gas distribution industry. Over this time, we have maintained numerous customer relationships spanning more than two decades. Providing a safe environment, quality workmanship, and exceptional value to our customers is the foremost focus of our operations. Q3 Contracting, has immediate openings for experienced Design Technicians in Little Canada, MN. The responsibility of this position is to function as the primary contact for future and existing customers by providing cost effective designs that balance customers' needs in accordance with our customers standards and administrative guidelines. Primary Responsibilities Include: Design safe operating facilities for new and existing customers according to Xcel Energy construction standards and interpret administrative instructions for consistent and cost-effective designs. Provide distribution design project management for most areas of design, limited only to the most complex. Responsible for the generation of additional company revenue through contacts with new business or existing customers. Manage projects from initial customer contact through post project analysis. Establish and manage the construction work plan to meet the customers' schedule and design requirements as well as financial and budgetary requirements. Obtain permits and easements for facilities in accordance with city ordinances, state, federal, and county agencies. Execute contracts and agreements in compliance with administrative instructions and regulatory requirements. Represent the Company with government officials, contractors, city agencies, vendors, architects, and engineers to provide services to customers. Job Requirements: High School Diploma or GED. Min. of Assoc. Degree in one of the following fields of study: drafting, design, automation, electronics, mechatronics, engineering, GIS, other related fields of study. In lieu of an Assoc. Degree: a combination of education and experience in design/drafting, construction, project management, or electronics providing equivalent experience and knowledge. Minimum 2 years' experience as a Designer I or equivalent experience. Proficient in one or more of the following: GIS, design software, work management programs, and related systems or related systems required. Knowledge of construction standards, materials, and technical codes. Proficient in Windows operating system and Microsoft Office applications (Outlook, Excel, Word, Access, etc.). Self-starter, able to work with minimal supervision. A Driver's License may be required. Q3 Contracting is a drug-free environment, and all candidates are subject to drug testing. Benefits Include: Competitive compensation is paid weekly. Best-in-class; Medical, Dental, Vision, and LTD/STD. 401(k) with company match, vested day-one. Employee Stock Purchase Plan [ESPP]. Tuition Reimbursement. Paid Time Off, Holiday Pay, and Community Service Paid Time Off. We provide paid sick leave as required by Colorado's Healthy Families and Workplaces Act. Pet Coverage "For our Furry Friends" Legal Assistance Coverage Award-winning safety programs. Overtime opportunities. Growth Opportunities. And more Compensation: $22-30/ hour (Compensation will depend on qualifications and experience.) EEO Statement: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Third Party Agency Notice: Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any fees from the use of any unsolicited resumes either through our ATS or via electronic mail systems from any agency representative or agency consultant unless your firm is an approved vendor partner with a current executed agreement. #PSCLI

A leading union design-build mechanical contractor is seeking a Mechanical Designer or Engineer with a strong background in HVAC design to join a growing engineering team. About the Role Design HVAC and mechanical systems using Revit for large-scale industrial, healthcare, commercial, and multifamily projects. Responsibilities Collaborate with project managers, field teams, and external partners to deliver high-quality, coordinated solutions. Contribute to 3D models, fabrication drawings, and construction documents. Provide technical expertise in equipment selection, scope development, pricing, and field support. Grow into leadership opportunities as the team expands. Qualifications 2+ years of MEP mechanical design experience (HVAC focus). Proficiency in Revit. Knowledge of Minnesota Mechanical & Energy Codes and ASHRAE standards. Strong communication, collaboration, and problem-solving skills. Required Skills HVAC design experience. Proficiency in Revit. Knowledge of relevant codes and standards. Pay range and compensation package Competitive salary (DOE). Flexible work hours with some WFH options. Work on high-impact projects across multiple sectors.

About the Role As a Product Designer, you are passionate creative, responsible for developing products and packaging for CURiO Brands that are innovative, beautiful, safe, and sellable to end consumers. You have a strong artist hand and are confident in illustration, painting, and other traditional mediums. You'll leverage your unique talents, such as illustration and surface design, to create and source custom vessels ( glass, metal, and ceramic ) and secondary packaging ( paper boxes, tubes, bags, labels, hangtags ), through the opportunity to work on CURiO's exciting brands Capri Blue, Thymes, and Otherland. ***This role is for candidates who reside within 60 miles of our office in Minneapolis, MN*** What You'll Do Design & Concept: Collaborate with Product Design Manager and team, along with Brand to research and concept new product ideas. Develop mood boards for new product collections and product formats. Push creative boundaries to drive great design and strong innovation. Proactively research market trends and innovation opportunities. Work with vendors to source and develop new techniques and manufacturing capabilities. Prepare creative presentations and present concepts to internal brand team and external customers. Demonstrate systematic approach in designs for varying structures, materials, sizes and product types. Brand steward, keen eye for detail, refine designs across selected product assortment. Create 3D renderings, recommend dimensions, and determine materials for product and packaging. Communicate with domestic and international vendors to achieve design intent, construction, safety, and usability goals. Contribute problem-solving ideas throughout the development process. Participate in the approval of prototype samples for style details, construction, safety, and usability. Organize and label incoming samples and approved counters. Attend weekly Design & Innovation status meetings and other meetings as needed. Work closely with Brand, Project Management, Engineering, R&D, Purchasing, Quality, Production, Finance, and Sales to ensure development is on track to meet project goals, design intent and timeline. Develop constructive and collaborative working relationships with vendors, colleagues, and others, maintaining them over time to produce successful results for the design team. Request price quotes and work with vendors to ensure target costs are achieved. Work closely with Project Management team and Cost Analyst on costing exercises. Contribute to product cost discussions, providing insights and ideas on how to cost engineer new developments to meet cost objectives. Work with the production artist for execution of final printable files. Work closely with external vendors, helping to build strong partnerships. Work closely with print vendors to develop structures, reviews proofs for color/ detail accuracy and attend press checks as needed. Color advocate for the brand standards. Cut and mock-up packaging/ product samples to support marketing team with photoshoot and sample needs. Provide design specifics and photos of development samples for specification documents. As a Curio Team Member You exemplify CURiO Cornerstones and strive for personal leadership in your role. You collaborate across teams and maintain a positive, respectful, and cooperative workplace environment. You take ownership of your professional development by seeking learning opportunities and staying current in your field. You manage your time effectively and work with others to contribute to team and company goals. You follow all safety guidelines, report concerns promptly, and maintain a clean, safe, and organized workspace. You understand that success in your role could include occasional extended work hours as necessary to meet seasonal deadlines and that periodically, you may be asked to perform other duties not included in your role description. What You Bring Qualifications: Bachelor of Fine Arts degree; emphasis in graphic or industrial design or equivalent work experience Two years' experience in product or packaging development or design Brings passion for the creative work and brand storytelling Strong knowledge of design techniques, ability to think creatively, with an eye for color and design Demonstrated success in working collaboratively with team members and across multiple departments, managing a large volume of projects simultaneously Proficient in design software; Adobe CS (Photoshop, InDesign, Illustrator) Proficient in Microsoft Office Suite. Preferred: Surface design and illustration skills 3D printer experience Core Competencies: Committed to development strong ideas and excellent execution Excellent critical thinking and problem-solving skills Excellent attention to detail, well organized, and systematic in working Strong leadership and communication skills Ability to present concepts and ideas with exceptional presentation and writing skills Excellent initiative and follow-through Ability to build and maintain relationships with business partners Self-Driven, energetic, able to work independently Ability to maintain and protect company proprietary information. Additional Information Travel Requirement: less than 5% Work Environment: General office or home office environment Physical Requirements: Occasionally required to lift and/or move items weighing 10 - 15 pounds. When in a facility, occasional exposure to dusty and fragrant conditions Why Join CURiO At CURiO, we craft beautiful experiences for the home and body through our fragrance and personal care brands. We're committed to creating a collaborative, inclusive workplace where talent can thrive and grow. You'll be part of a passionate team driving meaningful work - with the agility of a growth company and the heart of a purpose-driven brand. Health & Welfare Benefits Eligibility begins on the first day of the month following 30 days of employment unless noted otherwise: Medical, Dental, Disability Insurance (cost shared) Life/ AD&D Insurance (employer paid) Additional voluntary benefit offerings (employee paid): Vision, Accident, Flexible Spending Account, Health Savings Account, Dependent Care Flexible Spending Account, Voluntary Term Life Insurance, AD&D 401(k) - After 6 months of employment on next quarterly entry date Equal Opportunity Employer Curio is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to building an inclusive environment for all employees.

This role is responsible for designing electric distribution layouts for residential and commercial customers. The position combines technical design work, customer coordination, and field assessments to deliver accurate, construction-ready utility designs. Work is performed using a GIS-based design system, with collaboration across engineering, service, and gas design teams. Key Responsibilities Design & Technical Work Create, revise, and maintain electric distribution designs using GIS and drafting tools. Produce 2D (and occasional 3D) drawings for underground cable routing, transformer sizing, and pole placement. Interpret customer requirements, engineering drawings, and technical specifications. Prepare supporting documentation including bills of material, schedules, and drawing transmittals. Update designs based on field conditions, engineering feedback, and construction requirements. Project & Customer Coordination Manage multiple design projects simultaneously from intake through final design. Communicate directly with residential and commercial customers regarding scope, requirements, and timelines. Coordinate with internal engineering, service, and gas design teams to align project plans. Support engineering personnel with design clarifications and construction-related questions. Field Work Conduct local field visits to assess site conditions and existing infrastructure. Verify measurements, access points, and constructability prior to finalizing designs. Field work accounts for approximately 30% of the role.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman's Business Unit, Armament Systems, is seeking a Mechanical Designer 3 or 4 for our location in Plymouth, MN. Armament Systems specializes in the development and production of Ammunition, Guns and Precision Guidance Ordinance. Position Summary: Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or Creo. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments. Mechanical CAD Responsibilities: As a Mechanical Designer your responsibilities will be to model fully defined components and assemblies efficiently using Pro/E / Creo 10.0, and create/update parametric drawings in conformance with Northrop Grumman, Industry and DEVCOM Armaments Center 3D modeling standards. You will work with other engineers, technicians, program managers and administrative personnel to accomplish assigned tasks. Responsibilities include, but are not limited to: Accept work direction from other drafters/designers, engineers and manager on assigned project. Mechanical modeling utilizing Pro/E / Creo10.0 Create/update parametric drawings in conformance with Northrop Grumman, Industry and DEVCOM Armaments Center 3D modeling standards. Review work to ensure accuracy and completeness. Required Skills (level 3): Technical or Associate's Degree in Mechanical Drafting/Design. Four years minimum Pro/E / Creo experience with a minimum of 1 year utilizing Pro/E / Creo 10.0 Ability to model fully defined components and assemblies efficiently using Pro/E / Creo 10.0 Ability to create/update parametric drawings in conformance with Northrop Grumman, Industry and DEVCOM Armaments Center 3D modeling standards. Microsoft Office experience. Must be a US Citizen Ability to obtain a secret clearance Preferred Skills (level 3): Possess an understanding of geometric dimensioning and tolerancing. Understanding of Teamcenter PLM toolsets. Exposure to production/factory floor environment Exposure to or interest in ammunition, reloading, or shooting sports. Required Skills (level 4): Technical or Associate's Degree in Mechanical Drafting/Design. Six years minimum Pro/E / Creo experience with a minimum of 3 year utilizing Pro/E / Creo 10.0 Ability to model fully defined components and assemblies efficiently using Pro/E / Creo 10.0 Ability to create/update parametric drawings in conformance with Northrop Grumman, Industry and DEVCOM Armaments Center 3D modeling standards. Microsoft Office experience. Must be a US Citizen Ability to obtain a secret clearance Preferred Skills (level 4): Possess an understanding of geometric dimensioning and tolerancing. Understanding of Teamcenter PLM toolsets. Exposure to production/factory floor environment Exposure to or interest in ammunition, reloading, or shooting sports. Primary Level Salary Range: $67,300.00 - $112,100.00Secondary Level Salary Range: $79,000.00 - $133,100.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Design Drafter I - Service Department: Service Location: Minneapolis, MN START YOUR APPLICATION Electric Machinery Company, a division of WEG Electric Corp. Minneapolis, MN Service Design Drafter Department: Service The Design Drafter will create and maintain designs, layouts, drawings, and documentation required for product lines, which include motors, generators and magnetic drives. Design Drafters adhere to both internal and internationals standards, as well as applicable specifications in order to achieve satisfactory product performance. Product lines contain both standard and custom designs with high engineering content. Also support customer orders from the proposal phase thru the design, development, manufacturing, testing, and field service/aftermarket phases. The Design Drafter will be responsible for collaboration and sharing of best design practices within the WEG Company Major Areas of Accountability: * Engineering Work: Must be an enthusiastic self starter, able to organize and pursue broad objectives, and have the ability to manage multiple, changing priorities. Performs assigned drafting tasks under supervision, including creating 2D drawings and 3D models from sketches, layouts, creating bill of materials, or marked-up prints. Ensures drawings are accurate, clear, and meet established drafting standards. * Communication: Ability to communicate effectively, both verbally and in writing, on technical and issues. Demonstrated sense of urgency. * Quality & Accuracy: Reviews own work carefully to minimize errors. Learns to identify drafting issues and escalate concerns to senior drafters or engineers. * Software & Technical Programs: Computer literate, with knowledge of current operating systems and software. * Project Oversight: Determine project schedules to complete projects in required time. * Cross-Functional Support: * Incorporate manufacturability input provided by Manufacturing Engineering, into designs. * Integrates serviceability input from Service Engineers to improve long-term product reliability and support. * Provides support to Marketing on inquiries and new orders to assure technical and economic feasibility. * Documentation: Create and maintain standards, designs, drawings, and specifications for quotations, products, and aftermarket. Responsible for record keeping of same. * Collaboration: Works closely with senior drafters and engineers to understand project requirements. Accepts feedback and incorporates revisions into work. Resolve production problems and render technical and process assistance to shop. * Additional Duties: Performs other related activities as assigned by the Sr. Team Members, Team Leader, or Manager of Engineering. * Learning & Development: Builds knowledge of company drafting practices, product designs, and applicable standards. Develops proficiency in CAD software (SolidWorks, AutoCAD, SAP) through training and guided practice. Demonstrates willingness to learn new skills, software, and drafting techniques. Participates in team improvement initiatives when requested. Knowledge /Skills / Abilities: * 2 years technical college, 2 years college pre-engineering, Drafting Certificate or equivalent * 0 - 3 years experience building upon the Detail and Layout Drafter * Knowledge of documentation requirements of ISO 9001. * Knowledge and understanding of engineering operating systems within the department and understanding of how engineering interfaces with other departments. * Necessary present knowledge of current operating systems and software common to business applications (SolidWorks, AutoCAD, Microsoft Office Products including Word, Excel, PowerPoint and Project). * Ability to communicate effectively both verbally and in writing both internally & with customers Physical Requirements * Physical ability to travel freely within manufacturing and office facilities. * This requires climbing stairs and moving over, around, and about shop machinery and in-process apparatus in a safe manner. * Physical ability to climb a ladder, use scaffolding or catwalks to service machinery. * Physical ability to lift and carry 25 pounds. * Physical ability to travel via public, commercial or personal transportation. * Must possess an insurable drivers license. * Must be able to travel internationally. * Must possess a valid Passport or be able to obtain a Passport. Salary Range: $60,000 - $70,000 Company cannot provide sponsorship for this position Please, no agencies START YOUR APPLICATION

Job DescriptionDescription: Electric Machinery Company, a division of WEG Electric Corp. Minneapolis, MN Service Design Drafter Department: Service The Design Drafter will create and maintain designs, layouts, drawings, and documentation required for product lines, which include motors, generators and magnetic drives. Design Drafters adhere to both internal and internationals standards, as well as applicable specifications in order to achieve satisfactory product performance. Product lines contain both standard and custom designs with high engineering content. Also support customer orders from the proposal phase thru the design, development, manufacturing, testing, and field service/aftermarket phases. The Design Drafter will be responsible for collaboration and sharing of best design practices within the WEG Company Major Areas of Accountability: Engineering Work: Must be an enthusiastic self starter, able to organize and pursue broad objectives, and have the ability to manage multiple, changing priorities. Performs assigned drafting tasks under supervision, including creating 2D drawings and 3D models from sketches, layouts, creating bill of materials, or marked-up prints. Ensures drawings are accurate, clear, and meet established drafting standards. Communication: Ability to communicate effectively, both verbally and in writing, on technical and issues. Demonstrated sense of urgency. Quality & Accuracy: Reviews own work carefully to minimize errors. Learns to identify drafting issues and escalate concerns to senior drafters or engineers. Software & Technical Programs: Computer literate, with knowledge of current operating systems and software. Project Oversight: Determine project schedules to complete projects in required time. Cross-Functional Support: Incorporate manufacturability input provided by Manufacturing Engineering, into designs. Integrates serviceability input from Service Engineers to improve long-term product reliability and support. Provides support to Marketing on inquiries and new orders to assure technical and economic feasibility. Documentation: Create and maintain standards, designs, drawings, and specifications for quotations, products, and aftermarket. Responsible for record keeping of same. Collaboration: Works closely with senior drafters and engineers to understand project requirements. Accepts feedback and incorporates revisions into work. Resolve production problems and render technical and process assistance to shop. Additional Duties: Performs other related activities as assigned by the Sr. Team Members, Team Leader, or Manager of Engineering. Learning & Development: Builds knowledge of company drafting practices, product designs, and applicable standards. Develops proficiency in CAD software (SolidWorks, AutoCAD, SAP) through training and guided practice. Demonstrates willingness to learn new skills, software, and drafting techniques. Participates in team improvement initiatives when requested. Knowledge /Skills / Abilities: 2 years technical college, 2 years college pre-engineering, Drafting Certificate or equivalent 0 - 3 years' experience building upon the Detail and Layout Drafter Knowledge of documentation requirements of ISO 9001. Knowledge and understanding of engineering operating systems within the department and understanding of how engineering interfaces with other departments. Necessary present knowledge of current operating systems and software common to business applications (SolidWorks, AutoCAD, Microsoft Office Products including Word, Excel, PowerPoint and Project). Ability to communicate effectively both verbally and in writing both internally & with customers Physical Requirements Physical ability to travel freely within manufacturing and office facilities. This requires climbing stairs and moving over, around, and about shop machinery and in-process apparatus in a safe manner. Physical ability to climb a ladder, use scaffolding or catwalks to service machinery. Physical ability to lift and carry 25 pounds. Physical ability to travel via public, commercial or personal transportation. Must possess an insurable driver's license. Must be able to travel internationally. Must possess a valid Passport or be able to obtain a Passport. Salary Range: $60,000 - $70,000 Company cannot provide sponsorship for this position Please, no agencies Requirements:

Niron Magnetics is scaling the world's first advanced manufacturing process for the mass production of permanent magnets powered by its breakthrough material formulation. The company's proprietary magnet technology based on Iron Nitride enables magnets that are inherently high magnetization, free of rare earths and other critical materials, and will drive innovation in various industries. Niron Magnetics is comprised of a team of professionals with a desire to make a positive impact on the global community. We were named one of “America's Top GreenTech Companies” for 2024 and 2025 by TIME Magazine and the “Innovation of the Year” at the 2025 mHUB Fourth Revolution Awards. Our team is made up of people who think big, dare to innovate, and strive to impact the planet through technological innovation for our customers. Ready to learn alongside amazing people, solve complex problems, and leave a legacy? Join us. What you'll do We are seeking a skilled and detail-oriented CAD Drafter to join our engineering team. This role will support our Finishing, Tooling, and Compaction teams by creating and maintaining accurate technical drawings for tools, finished parts, and part assemblies. The ideal candidate will have a strong foundation in drafting principles, experience with SolidWorks and Fusion/AutoCAD, and the ability to interpret and produce precise engineering drawings. Key Responsibilities: Collaborate closely with tooling, compaction, and finishing teams to develop detailed 2D and 3D CAD drawings, model files suitable for fabrication, customer review and internal process use. Draft and revise technical model & drawings for tools, components, assemblies, and finished parts. Design fixturing and tooling solutions to hold parts securely during machining, assembly, and finishing operations. Interpret engineering sketches, specifications, and verbal instructions to create accurate representations. Ensure drawings comply with company standards and industry best practices. Maintain organized drawing files and documentation for easy retrieval and revision tracking. Participate in design reviews and provide input on manufacturability and design improvements. Support engineering change processes and update drawings accordingly. Perform basic FEA or mapping to validate structural integrity and optimize designs (preferred but not required). What we are looking for Associate degree in Drafting, Engineering Technology, or related field. Minimum of 2 years of experience in CAD drafting, preferably in a manufacturing or engineering environment. Proficiency in SolidWorks, Fusion, AutoCAD and/or similar CAD software. Strong understanding of technical drawing standards, tolerances, and dimensioning. Ability to read and comprehend complex engineering drawings and specifications. Excellent attention to detail and organizational skills. Effective communication and collaboration skills across multidisciplinary teams. Must be a US Citizen or Legal Permanent Resident (LPR) Nice to have Ideal candidate would also design fixturing and tooling solutions to support manufacturing processes and may assist with basic finite element analysis (FEA) to validate designs. Experience with GD&T (Geometric Dimensioning and Tolerancing). Familiarity with manufacturing processes related to tooling, compaction, machining operations, fixturing, finishing assemblies, and packaging. Knowledge of CAM software or CNC programming is a plus, but training will be provided. Our pay and benefits Base salary range: $59,000 - $68,000 based on experience, education, and capabilities Equity position in Niron via stock option grant Comprehensive medical, dental, and vision insurance Mental healthcare 401k plan with company match Paid vacation, sick time, and holidays Experience in a fun, high-performing, manufacturing environment

Job DescriptionDescription: As a Mechanical Designer, you will contribute to the development of detailed mechanical design drawings to support high-quality project design and documentation. The ideal candidate is reliable, eager to learn, and takes ownership of their work while collaborating closely with their colleagues. Success in this role requires strong attention to detail, time management, and professional communication. Key Responsibilities Design & Documentation Support Develop detailed mechanical system drawings in line with project and code requirements. Create complete drawing sets in Revit, including model setup, sheet creation, view templates, and coordination with other disciplines. Coordinate with structural, electrical, and architectural teams. Ensure compliance with internal design standards and applicable codes. Technical Design Tasks Perform HVAC load calculations and mechanical equipment selection. Layout and size ductwork, hydronic piping, gas piping, and plumbing systems (water, waste, vent, storm). Draft riser diagrams and coordinate mechanical equipment schedules. Assist with shop drawing reviews and RFIs. Apply relevant codes to your design and documentation work. Document Production & Coordination Produce accurate and consistent construction documents using Revit, Bluebeam, and Trane TRACE700. Maintain organized design files and records. Communicate clearly with team members and across disciplines. Review your work and coordinate with other trades for accuracy. Professional Engagement Maintain professional appearance and consistent work habits. Participate in meetings, manage deadlines, and contribute to a collaborative team culture. Build vendor relationships through technical discussions and product knowledge sessions. Balance work responsibilities with personal well-being and growth. We do not accept applications from recruiters or third-party agencies. Requirements: Required Qualifications Must be authorized to work in the U.S. Associate degree in Mechanical Design, Drafting, Engineering Technology, or related field. Strong attention to detail and organizational skills. Excellent verbal and written communication. Preferred Qualifications Bachelor's degree in Mechanical Engineering or related field from an ABET accredited program. Internship or professional experience in the A/E/C industry.

Job Title: Mechanical Designer/DrafterJob Description We are seeking a skilled Mechanical Designer/Drafter responsible for solid modeling of various parts, including tubing, castings, machine parts, adapters, and components across all product lines. You will design and re-design existing drawings using Solidworks, focusing on drafting and designing small parts. Your role will support engineering by modifying existing drawings and sometimes creating new designs. Responsibilities * Perform solid modeling of parts, piece parts, tubing, castings, machine parts, adapters, and components. * Design and re-design existing drawings using Solidworks. * Draft and design small parts and assemblies. * Support engineering by modifying existing drawings and creating new designs when necessary. Essential Skills * Proficiency in Solidworks with at least 3 years of experience or 1 year of experience in Creo. * Minimum Associate's degree in Mechanical Drafting and Design. * At least 1 year of experience in the design of castings, tubing, machine parts, adapters, weldments, and/or fixtures. * Minimum 1 year of experience working in a mechanical/industrial environment with mechanical parts, castings, weldments, and/or machine parts. Additional Skills & Qualifications * Experience in the industrial/mobile equipment industry is a plus. * Strong consistency and organizational skills. * Excellent communication skills and a desire to learn. Work Environment This role is within a fast-paced environment with frequent daily interruptions. You will not be responsible for prioritizing work, with tasks divided as 60% drafting and 40% design. You will support all product offerings and interface with 3-5 engineers daily, taking work direction from a design manager. While expected to work autonomously after receiving work direction, there is no time allocated for training. Job Type & Location This is a Contract position based out of Eden Prairie, MN. Pay and Benefits The pay range for this position is $24.00 - $34.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Eden Prairie,MN. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description Job Title: Design Drafter - Sustaining Engineering Trystar is at the forefront of advancing power solutions, charged and driven by a committed, dynamic team, tackling complex challenges, and creating innovative solutions. Safety and integrity aren't just buzzwords. They are the north star guiding us as we aspire to wow our customers every day. We've created power solutions that are not only durable and unique but are also the result of serious teamwork from every corner of our organization. Individually and collectively, every team member at Trystar plays for each other and strives to deliver unmatched value and 100% accuracy to our customers every single day. As a big name and pioneer in power solutions, we're not just part of the power conversation - we're shaping its future, and we're doing so across diverse industry sectors including healthcare, data centers, entertainment, education, government, and commercial construction - just to name a few! We're committed to growing and evolving our product lineup to stay on top of the game and that includes leaning into sustainable, resilient, and renewable energy solutions. Our cutting-edge headquarters in Faribault, MN is partially solar, and wind powered by our own microgrid! You'll find that we're also pushing boundaries across the country at our additional facilities in Troy, MI; Houston, TX; Merrimack, NH; Burnsville, MN; and Murfreesboro, TN. Together, we are Trystar, where we power the future and nurture innovation for a brighter tomorrow. Trystar's team members are our most important asset, we are in search of a Designer to join our team. As part of the engineering team, the Designer will be supporting the team by creating and updating both mechanical and electrical design to support product improvements with accurate engineering documentation (e.g. 3D models, mechanical drawings, schematics, etc.). The ideal candidate will be proficient in CAD tools and capable of creating detailed drawings and models that meet engineering and industry standards. This position reports directly to the Sustaining Mechanical & Electrical Engineering Manager. Job Responsibilities: Develop and revise detailed mechanical and electrical drawings, schematics, and layouts using CAD software Collaborate with engineering teams to translate product improvement concepts and prototypes into production-ready designs. Create and maintain accurate documentation including BOMs, assembly instructions, and revision histories. Ensure designs comply with applicable codes, standards, and manufacturing capabilities. Perform tolerance analysis and ensure proper fit and function of mechanical components. Assist in the integration of electrical components into mechanical assemblies. Review and incorporate feedback from engineers, manufacturing, and quality teams. Maintain drawing databases and support change management system Job Requirements: BASIC QUALIFICATIONS Associate's degree in mechanical engineering technology, Electrical Engineering Technology, or related field. 6+ years of experience in mechanical and electrical drafting/design. Proficiency in CAD tools such as AutoCAD, SolidWorks, and electrical design software. Understanding of mechanical fabrication processes and electrical wiring standards. Experience with ECO processes and change management systems. Strong attention to detail and organizational skills. Ability to work independently and in a team environment. Excellent communication skills for cross-functional collaboration. ADDITIONAL QUALIFICATIONS SolidWorks Electrical experience Excellent interpersonal skills with a proven ability to manage multiple tasks Strong communications skills Ability to adapt & thrive in a fast-paced/high growth work environment Experience with ERP and Electrical CAD software Microsoft Office proficiency Passion for Trystar, its culture, and a commitment to deliver on its growth, performance, and operational metrics

Job Description The AutoCAD/Revit Drafting Designer is responsible for creating and managing 2D and 3D models utilizing AutoCAD, Revit, Autodesk Build, and Autodesk Cloud platforms for telecommunication schematics, equipment elevations, low voltage cable pathways, as-built drawings, etc. The Drafting Designer will work closely with Sales, Project Management, the field staff, as well as external engineering companies to develop detailed design plans, construction documents, and communicate technical requirements. Duties and responsibilities Utilize AutoCAD and Revit software to create and maintain detailed 2D and 3D models, construction documents, and technical drawings for various projects Utilize AutoCAD and Revit to create and maintain Wiring one line drawings, Telecommunication Room layout, Elevations, Sections and details Utilize Autodesk Build and Autodesk Cloud for document management, coordination, and workflow tracking. Review and comprehend engineered MEP drawings for accuracy of design Assist in developing design set templates, standards, and legends Create customer standards / specifications documents Manage design set revisions for construction, electrical and technical audiences Work collaboratively with engineers, project managers, and field teams to ensure accurate and coordinated drawings. Communicate technical requirements for construction and electrical contractors by developing submittals, key notes and technical writeups Communicate with installation crews for as-built documentation Support design reviews and incorporate field mark-ups or as-built conditions into drawings. Support technical teams and sales engineers with cable counts, distances, and unique site/ facility impactors, etc. Other duties as assigned Qualifications Bachelor's or Associates Degree in Architecture, Engineering, related field, or industry experience required RCDD or AutoCAD certification preferred Strong proficiency in AutoCAD and Revit software required Familiar with Autodesk Cloud and Autodesk Build environments required Experience drafting low voltage systems (structured cabling, DAS, Wi-Fi, security, or similar) preferred Strong communication and collaboration skills to work effectively with project teams and stakeholders Strong organizational skills to maintain project file structure, drawing and document historical filing Dynamo and programing experience a plus but not required Benefits Medical, Dental & Vision Insurance Life Insurance STD & LTD 50% 401(k) Match 10 Paid Holidays PTO Quarterly Food Trucks Awesome co-workers Working conditions Office setting Work Location: Plymouth, MN

20805 Eaton Ave Farmington Minnesota 55024-7932 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce. Are you ready to move the world forward? Apply now. Location: Farmington, MN (Onsite) A Brief Summary of This Position: This is an individual contributor position in the Lighting and Transportation division. The incumbent reads and interprets customer order information. This position processes drafting requests for production and customer submittal drawings, consistent with Valmont standard practices, in the moderate range of complexity, and prepares the necessary drawings and other data for the teams, other departments and the manufacturing facilities, as well as interfaces, with direction from the site Engineering Manager, directly with other company departments on customer order and manufacturing problems. Customer contact may be required to aid the design/order process. The Drafting Department is responsible for processing drawings for customers and the manufacturing facilities while maintaining the company objectives for quality and lead-time. This Individual Contributor role must interact with people in all departments in order to maintain amiable and profitable relationships in inter-departmental communication. The incumbent will, with required supervision, read and interpret customer specifications, plans, and other order information to determine the format required to complete customer orders. He/she will be responsible for reporting any inconsistent, conflicting, or missing customer information to the reviewing Engineer. This position is important to the results of the department and the division. He/she may identify, recommend, and help develop revisions to standard product designs, drafting procedures, and systems to improve the department and the division. Essential Functions: * This position reports to the site Engineering Manager and has no direct or indirect reports * This role requires limited to no travel * Analyze all information necessary to complete drawings for an individual order accurately and efficiently * Support the department backlog by monitoring individual drafting order schedules, providing updates to the computerized backlog, and meeting "Promises Kept" in accordance with departmental priorities * Maintain required drafting productivity output in accordance with departmental priorities * Maintain required drawing accuracy in accordance with departmental priorities * Maintain a cooperative and professional attitude in dealing with all departments of the company * Maintain and update an accurate filing system of customer requirements * Maintain an awareness of current Drafting policies and procedures * Maintain an awareness of current manufacturing capabilities and limitations * Handle special assignments as requested by the Engineering Manager. * Provide technical or drafting support to any department, for any project that will enhance product or company interest * Maintain appropriate professional competencies, certifications, licenses, etc., necessary to perform job duties * Develop tapering profiles for production equipment using established software tools * Develop 3D models of parts to be used for programming of CNC equipment Required Qualifications of Every Candidate: * High School diploma and 2+ years of work/educational experience in drafting * Technical skills in computer-aided drafting and a basic understanding of mathematics are normally acquired through an Associate of Applied Science degree and/or related experience (includes Algebra, Geometry, and Trigonometry) * A solid background in using AutoCAD * Previous PC experience a must, including intermediate level knowledge of Microsoft Office (Word, Excel, and Outlook) and Autodesk (AutoCAD and Inventor) * Demonstrated ability to read and interpret customer specifications, plans, and other order information to determine the format required to complete customer orders * Ability to identify any inconsistent, conflicting or missing customer information and determine the correct course of action to resolve the issues with some assistance from the Engineering team Highly Qualified Candidates Will Also Possess These Qualifications: * Associates Degree in Drafting * Autodesk Inventor 2013 or newer version * Past experience in structural drafting Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: * Healthcare (medical, prescription drugs, dental and vision) * 401k retirement plan with company match * Paid time off * Employer paid life insurance * Employer paid short-term and long-term disability including maternity leave * Work Life Support * Tuition Reimbursement up to $5,250 per year * Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.

Grays Specialty Equipment segment offers a comprehensive range of expert services to design, manufacture, integrate, install, and maintain some of the most advanced systems on the market. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN, and Waconia, MN. Anderson Dahlen delivers end-to-end equipment design-build and contract manufacturing, with precision fabrication cutting, forming, machining, welding, finishing, and complex assemblies backed by engineering, integration, and complete process solutions including skids and sanitary platforms tailored to customer applications. Anderson Dahlen is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $77,350 to $113,500/annually. PRIMARY OBJECTIVE OF THE POSITION: This position is within the Food & Beverage Unit. Experience in analyzing customer requirements to design fabricated components and systems for manufacturability. Understand and/or perform design calculations to ensure equipment meets functional requirements. Work in a fast-paced environment and cooperate with operations, sourcing, quality, project management to meet and exceed customer expectations. A Design Engineer seeks to balance various aspects of the project, including safety, cost, manufacturability. Additionally, a Design Engineer researches advanced technology regarding best practices in the field of high precision stainless steel manufacturing and finds cost-effective solutions. Provide input into make versus buy decisions for components within a system. MAJOR AREAS OF ACCOUNTABILITY: Creates designs, specifications, models, bills of material and manufacturing drawings along with a team of other engineers and drafters. Coordinates efforts with production to ensure that the design meets manufacturability capabilities including tolerance stack up and surface finish. Ensures that the intended product or structure will be safe, dependable, cost effective and meet regulatory requirements. Builds a prototype if needed, for testing and approval. Reviews customer models and drawings for missing or incorrect information required in producing the customers part through to completion. Creates solid models or update models provided by customer. Modifies existing designs or products, to improve their performance or to integrate new technology. Performs engineering calculations to size components and process equipment in order to meet performance requirements such as speed, torque, flow rate, stress, fatigue, pressure, vacuum, and other parameters. Customer site visits, if needed on projects that require onsite installation and technical support. Interacts with customers up front during the quotation phase to better understand the requirements. Works closely with the quality assurance team to define a quality/inspection plan and ensure that required quality standards are adhered to. Provides optimum cooperation and complete information to Project Manager to ensure on-time and accurate job completion. Works closely with the Project Manager to develop production plan entered into Made2Manage ERP system, purchase necessary articles / buy outs in coordination with Purchasing, provide guidance if needed during assembly of products. Works with production supervisors for Laser, Fabrication, and Machining and shop personnel to improve designs through effective communication/coordination and movement of parts and material. Keeps up to date with research and development as appropriate with changes in manufacturing technology including fabrication, welding, laser, finishing, assembly. Maintains and portrays a high degree of professionalism both within and outside the organization, encouraging excellence through example. Keeps supervisor informed. Complies with Company and Department policies and procedures as applicable. Maintains a positive attitude and promotes a team approach throughout the Department. Ensures that a favorable Company image is presented to customers, and that all customer relationships are based on honesty and integrity. Other duties as assigned. Requirements: QUALIFICATIONS FOR ENTRY: BS degree in Engineering in Mechanical, Manufacturing, Industrial, Machine Design, Process Design or related field with 5 years of experience in a manufacturing or fabrication environment. AAS degree in relevant field such as Mechanical Design with 10 years of experience in a manufacturing or fabrication environment. Solid experience with product design and manufacturing, specially Design For Manufacturing (DFM). 3D CAD required (preferably Solid Works). Knowledge of GD&T principles strongly preferred. Knowledge of ASME, FEA calculations preferred. Experience with FMEA, DVP&R, Quality Control, Site-Installation a plus. Project development and leadership skills are essential. Experience with customer interaction and working under time constraints a definite plus. Experience with software/controls engineering and system design principles a plus. Professional work experience reviewing and analyzing prototypes and product modifications preferred. PHYSICAL REQUIREMENTS: The company fosters a manufacturing-type environment. The physical demands described below are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lift/Carry- 0-10 lbs.- Occasionally 11-50 lbs.- Occasionally 51-100 lbs.-Never 51-100 lbs.- Occasionally Push/Pull- 0-25 lbs.- Occasionally 26-75 lbs.- Occasionally 76-100 lbs.- Never Bend- 0-33% during an 8-hour shift Twist/Turn- 0-33% during an 8-hour shift Kneel/Squat- Not at all Sit- 67-100% during an 8-hour shift. Stand/Walk- 0-33% during an 8-hour shift Overhead Reaching- 0-33% during an 8-hour shift Ladder/Stair- 0-33% during an 8-hour shift EEO DISCLAIMER: Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Compensation details: 77350-113500 Yearly Salary PIfa0213ad32a3-31181-38996261

Electric Machinery Company, a division of WEG Electric Corp. Minneapolis, MN Service Design Drafter Department: Service The Design Drafter will create and maintain designs, layouts, drawings, and documentation required for product lines, which include motors, generators and magnetic drives. Design Drafters adhere to both internal and internationals standards, as well as applicable specifications in order to achieve satisfactory product performance. Product lines contain both standard and custom designs with high engineering content. Also support customer orders from the proposal phase thru the design, development, manufacturing, testing, and field service/aftermarket phases. The Design Drafter will be responsible for collaboration and sharing of best design practices within the WEG Company Major Areas of Accountability: Engineering Work: Must be an enthusiastic self starter, able to organize and pursue broad objectives, and have the ability to manage multiple, changing priorities. Performs assigned drafting tasks under supervision, including creating 2D drawings and 3D models from sketches, layouts, creating bill of materials, or marked-up prints. Ensures drawings are accurate, clear, and meet established drafting standards. Communication: Ability to communicate effectively, both verbally and in writing, on technical and issues. Demonstrated sense of urgency. Quality & Accuracy: Reviews own work carefully to minimize errors. Learns to identify drafting issues and escalate concerns to senior drafters or engineers. Software & Technical Programs: Computer literate, with knowledge of current operating systems and software. Project Oversight: Determine project schedules to complete projects in required time. Cross-Functional Support: Incorporate manufacturability input provided by Manufacturing Engineering, into designs. Integrates serviceability input from Service Engineers to improve long-term product reliability and support. Provides support to Marketing on inquiries and new orders to assure technical and economic feasibility. Documentation: Create and maintain standards, designs, drawings, and specifications for quotations, products, and aftermarket. Responsible for record keeping of same. Collaboration: Works closely with senior drafters and engineers to understand project requirements. Accepts feedback and incorporates revisions into work. Resolve production problems and render technical and process assistance to shop. Additional Duties: Performs other related activities as assigned by the Sr. Team Members, Team Leader, or Manager of Engineering. Learning & Development: Builds knowledge of company drafting practices, product designs, and applicable standards. Develops proficiency in CAD software (SolidWorks, AutoCAD, SAP) through training and guided practice. Demonstrates willingness to learn new skills, software, and drafting techniques. Participates in team improvement initiatives when requested. Knowledge /Skills / Abilities: 2 years technical college, 2 years college pre-engineering, Drafting Certificate or equivalent 0 - 3 years experience building upon the Detail and Layout Drafter Knowledge of documentation requirements of ISO 9001. Knowledge and understanding of engineering operating systems within the department and understanding of how engineering interfaces with other departments. Necessary present knowledge of current operating systems and software common to business applications (SolidWorks, AutoCAD, Microsoft Office Products including Word, Excel, PowerPoint and Project). Ability to communicate effectively both verbally and in writing both internally & with customers Physical Requirements Physical ability to travel freely within manufacturing and office facilities. This requires climbing stairs and moving over, around, and about shop machinery and in-process apparatus in a safe manner. Physical ability to climb a ladder, use scaffolding or catwalks to service machinery. Physical ability to lift and carry 25 pounds. Physical ability to travel via public, commercial or personal transportation. Must possess an insurable driver s license. Must be able to travel internationally. Must possess a valid Passport or be able to obtain a Passport. Salary Range: $60,000 - $70,000 Company cannot provide sponsorship for this position Please, no agencies

Full-time Description Electric Machinery Company, a division of WEG Electric Corp. Minneapolis, MN Service Design Drafter Department: Service The Design Drafter will create and maintain designs, layouts, drawings, and documentation required for product lines, which include motors, generators and magnetic drives. Design Drafters adhere to both internal and internationals standards, as well as applicable specifications in order to achieve satisfactory product performance. Product lines contain both standard and custom designs with high engineering content. Also support customer orders from the proposal phase thru the design, development, manufacturing, testing, and field service/aftermarket phases. The Design Drafter will be responsible for collaboration and sharing of best design practices within the WEG Company Major Areas of Accountability: Engineering Work: Must be an enthusiastic self starter, able to organize and pursue broad objectives, and have the ability to manage multiple, changing priorities. Performs assigned drafting tasks under supervision, including creating 2D drawings and 3D models from sketches, layouts, creating bill of materials, or marked-up prints. Ensures drawings are accurate, clear, and meet established drafting standards. Communication: Ability to communicate effectively, both verbally and in writing, on technical and issues. Demonstrated sense of urgency. Quality & Accuracy: Reviews own work carefully to minimize errors. Learns to identify drafting issues and escalate concerns to senior drafters or engineers. Software & Technical Programs: Computer literate, with knowledge of current operating systems and software. Project Oversight: Determine project schedules to complete projects in required time. Cross-Functional Support: Incorporate manufacturability input provided by Manufacturing Engineering, into designs. Integrates serviceability input from Service Engineers to improve long-term product reliability and support. Provides support to Marketing on inquiries and new orders to assure technical and economic feasibility. Documentation: Create and maintain standards, designs, drawings, and specifications for quotations, products, and aftermarket. Responsible for record keeping of same. Collaboration: Works closely with senior drafters and engineers to understand project requirements. Accepts feedback and incorporates revisions into work. Resolve production problems and render technical and process assistance to shop. Additional Duties: Performs other related activities as assigned by the Sr. Team Members, Team Leader, or Manager of Engineering. Learning & Development: Builds knowledge of company drafting practices, product designs, and applicable standards. Develops proficiency in CAD software (SolidWorks, AutoCAD, SAP) through training and guided practice. Demonstrates willingness to learn new skills, software, and drafting techniques. Participates in team improvement initiatives when requested. Knowledge /Skills / Abilities: 2 years technical college, 2 years college pre-engineering, Drafting Certificate or equivalent 0 - 3 years' experience building upon the Detail and Layout Drafter Knowledge of documentation requirements of ISO 9001. Knowledge and understanding of engineering operating systems within the department and understanding of how engineering interfaces with other departments. Necessary present knowledge of current operating systems and software common to business applications (SolidWorks, AutoCAD, Microsoft Office Products including Word, Excel, PowerPoint and Project). Ability to communicate effectively both verbally and in writing both internally & with customers Physical Requirements Physical ability to travel freely within manufacturing and office facilities. This requires climbing stairs and moving over, around, and about shop machinery and in-process apparatus in a safe manner. Physical ability to climb a ladder, use scaffolding or catwalks to service machinery. Physical ability to lift and carry 25 pounds. Physical ability to travel via public, commercial or personal transportation. Must possess an insurable driver's license. Must be able to travel internationally. Must possess a valid Passport or be able to obtain a Passport. Salary Range: $60,000 - $70,000 Company cannot provide sponsorship for this position Please, no agencies Salary Description $60,000 - $70,000

Niron Magnetics is scaling the world's first advanced manufacturing process for the mass production of permanent magnets powered by its breakthrough material formulation. The company's proprietary magnet technology based on Iron Nitride enables magnets that are inherently high magnetization, free of rare earths and other critical materials, and will drive innovation in various industries. Niron Magnetics is comprised of a team of professionals with a desire to make a positive impact on the global community. We were named one of "America's Top GreenTech Companies" for 2024 and 2025 by TIME Magazine and the "Innovation of the Year" at the 2025 mHUB Fourth Revolution Awards. Our team is made up of people who think big, dare to innovate, and strive to impact the planet through technological innovation for our customers. Ready to learn alongside amazing people, solve complex problems, and leave a legacy? Join us. What you'll do We are seeking a skilled and detail-oriented CAD Drafter to join our engineering team. This role will support our Finishing, Tooling, and Compaction teams by creating and maintaining accurate technical drawings for tools, finished parts, and part assemblies. The ideal candidate will have a strong foundation in drafting principles, experience with SolidWorks and Fusion/AutoCAD, and the ability to interpret and produce precise engineering drawings. Key Responsibilities: * Collaborate closely with tooling, compaction, and finishing teams to develop detailed 2D and 3D CAD drawings, model files suitable for fabrication, customer review and internal process use. * Draft and revise technical model & drawings for tools, components, assemblies, and finished parts. * Design fixturing and tooling solutions to hold parts securely during machining, assembly, and finishing operations. * Interpret engineering sketches, specifications, and verbal instructions to create accurate representations. * Ensure drawings comply with company standards and industry best practices. * Maintain organized drawing files and documentation for easy retrieval and revision tracking. * Participate in design reviews and provide input on manufacturability and design improvements. * Support engineering change processes and update drawings accordingly. * Perform basic FEA or mapping to validate structural integrity and optimize designs (preferred but not required). What we are looking for * Associate degree in Drafting, Engineering Technology, or related field. * Minimum of 2 years of experience in CAD drafting, preferably in a manufacturing or engineering environment. * Proficiency in SolidWorks, Fusion, AutoCAD and/or similar CAD software. * Strong understanding of technical drawing standards, tolerances, and dimensioning. * Ability to read and comprehend complex engineering drawings and specifications. * Excellent attention to detail and organizational skills. * Effective communication and collaboration skills across multidisciplinary teams. * Must be a US Citizen or Legal Permanent Resident (LPR) Nice to have * Ideal candidate would also design fixturing and tooling solutions to support manufacturing processes and may assist with basic finite element analysis (FEA) to validate designs. * Experience with GD&T (Geometric Dimensioning and Tolerancing). * Familiarity with manufacturing processes related to tooling, compaction, machining operations, fixturing, finishing assemblies, and packaging. * Knowledge of CAM software or CNC programming is a plus, but training will be provided. Our pay and benefits * Base salary range: $59,000 - $68,000 based on experience, education, and capabilities * Equity position in Niron via stock option grant * Comprehensive medical, dental, and vision insurance * Mental healthcare * 401k plan with company match * Paid vacation, sick time, and holidays * Experience in a fun, high-performing, manufacturing environment

Job Title: Design Drafter - Sustaining Engineering Trystar is at the forefront of advancing power solutions, charged and driven by a committed, dynamic team, tackling complex challenges, and creating innovative solutions. Safety and integrity aren't just buzzwords. They are the north star guiding us as we aspire to wow our customers every day. We've created power solutions that are not only durable and unique but are also the result of serious teamwork from every corner of our organization. Individually and collectively, every team member at Trystar plays for each other and strives to deliver unmatched value and 100% accuracy to our customers every single day. As a big name and pioneer in power solutions, we're not just part of the power conversation - we're shaping its future, and we're doing so across diverse industry sectors including healthcare, data centers, entertainment, education, government, and commercial construction - just to name a few! We're committed to growing and evolving our product lineup to stay on top of the game and that includes leaning into sustainable, resilient, and renewable energy solutions. Trystar's team members are our most important asset, we are in search of a Designer to join our team. As part of the engineering team, the Designer will be supporting the team by creating and updating both mechanical and electrical design to support product improvements with accurate engineering documentation (e.g. 3D models, mechanical drawings, schematics, etc.). The ideal candidate will be proficient in CAD tools and capable of creating detailed drawings and models that meet engineering and industry standards. This position reports directly to the Sustaining Mechanical & Electrical Engineering Manager. Job Responsibilities: Develop and revise detailed mechanical and electrical drawings, schematics, and layouts using CAD software Collaborate with engineering teams to translate product improvement concepts and prototypes into production-ready designs. Create and maintain accurate documentation including BOMs, assembly instructions, and revision histories. Ensure designs comply with applicable codes, standards, and manufacturing capabilities. Perform tolerance analysis and ensure proper fit and function of mechanical components. Assist in the integration of electrical components into mechanical assemblies. Review and incorporate feedback from engineers, manufacturing, and quality teams. Maintain drawing databases and support change management system Job Requirements: BASIC QUALIFICATIONS Associate's degree in mechanical engineering technology, Electrical Engineering Technology, or related field. 6+ years of experience in mechanical and electrical drafting/design. Proficiency in CAD tools such as AutoCAD, SolidWorks, and electrical design software. Understanding of mechanical fabrication processes and electrical wiring standards. Experience with ECO processes and change management systems. Strong attention to detail and organizational skills. Ability to work independently and in a team environment. Excellent communication skills for cross-functional collaboration. ADDITIONAL QUALIFICATIONS SolidWorks Electrical experience Excellent interpersonal skills with a proven ability to manage multiple tasks Strong communications skills Ability to adapt & thrive in a fast-paced/high growth work environment Experience with ERP and Electrical CAD software Microsoft Office proficiency Passion for Trystar, its culture, and a commitment to deliver on its growth, performance, and operational metrics