Computer aided design designer jobs in North Valley, NM - 37 jobs

Longenecker & Associates (L&A) seeks a motivated CAD Design Support team member to contribute to our mission supporting our work at a premier national laboratory in Albuquerque, New Mexico. L&A is a woman-owned small business and trusted partner enabling critical missions across the U.S. Department of Energy (DOE) complex for more than 30 years. We contribute to DOE's nuclear security and environmental remediation enterprise by providing the highest-caliber staff and experts. L&A is unconditionally committed to mission success and the well-being of employees, the nation and the environment. Our team members are passionate about building a healthier environment for generations to come. We are a community that interfaces and effectively communicates with all levels of management and government. If you have a passion for excellence, seek opportunities to engage in mission critical work, and consistently exceed expectations, apply now to join our professional family. POSITION DESCRIPTION The main duties include, but are not limited to: Creating Models and Drawings for the Saturn recap project for 6-12 months; Working closely with mechanical engineers, design engineers, and controls engineers; Cycling through an iterative design process requiring strong configuration management and quality control experience; Collaborating with engineers throughout the drawing phase prior to modeling; and Working with routing, schematics, piping systems, sheet metal, welding and weldments. EDUCATION REQUIREMENTS Associate degree in Computer Aided Drafting and Design Technology (CADD) OR four years of equivalent experience. MINIMUM QUALIFICATIONS Experience using CAD software Creo Parametric and PDMLink tools; Able to apply Geometric Dimensioning and Tolerancing (GD&T) to drawings; Able to acquire and maintain a DOE Q level security clearance; Ability to work in a diverse work environment; Satisfactory results of a pre-employment screening, which includes a background check and drug screening in accordance with Federal requirements (details below); and Ability to fulfill and promote L&A core values. DESIRED QUALIFICATIONS Experience in experimental hardware design; Experience with assembly size in the 1,000s; Experience with Stack Analysis; Experience with routing and schematics; Experience with welding and weldments as well as piping systems and sheet metal; Experience with Windchill; Experience with Pulsed Power Systems (mechanical systems in extreme high current and voltage environments); and Currently hold DOE clearance or equivalent. LOCATION Albuquerque, New Mexico PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management's assignment of essential functions and the descriptions listed do not restrict management's right to assign or reassign duties and responsibilities to this job at any time. PRE-EMPLOYMENT SCREENING Please note that marijuana remains a Schedule I controlled substance under Federal Law. Federal contractors must follow Federal drug-free workplace rules, which prohibit marijuana use, even if medical or recreational use is permitted under State Law. SALARY AND BENEFITS As an L&A employee, you will be eligible for a competitive salary as well as a comprehensive benefits package including healthcare (medical and dental), 401K plan, and paid time off. We believe in investing in our employees beyond compensation and as an L&A employee, you will have access to in-house training, career pathing, mentoring, award programs, tuition reimbursement and much more. L&A is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin, age, or status as a qualified individual with a disability or protected veteran.

Wilson & Company is currently seeking an experienced Mechanical Designer to assist our mechanical engineering and design team with a focus in heating, ventilation, air-conditioning (HVAC) and plumbing systems for commercial, institutional, governmental, and educational facilities. The ideal candidate will bring a strong understanding and background in building HVAC systems, plumbing systems, piping, process systems, control systems, PFD, and P&IDs. Roles and Responsibilities: Equipment selection, mechanical plan layout, cost estimating, coordination with other consultants and team members, and client interaction. Develop and design within a BIM design environment Assist in developing project technical standards, processes, and procedures Ability to take direction from the Engineer of Record (EOR) and complete projects within project schedules and assigned budgets Provide field observation reports of onsite analysis and consultation Collaborate with the internal and external project team to execute a project from concept to completion including meeting attendance, site visits, response to RFIs, submittal review and responses Maintain rapport with industry vendors and stay up to date on the latest mechanical system trends and solutions appropriate to building technologies and design/construction industry The candidate must have a working knowledge and familiarity with several mechanical design codes and software. Some of these may include: Codes and Standards: International Mechanical Code (IMC) International Plumbing Code (IPC) Uniform Mechanical Code (UMC) Uniform Plumbing Code (UPC) ASME Standards ASHRAE Standards Piping codes, B31.1, B31.3 National Fire Protection Association (NFPA) National CAD Standards (NCS) Software: Autodesk AutoCAD Engineering and construction software Revit Building Information Modeling (BIM) Microsoft Office software Bluebeam Revu Required Experience: Minimum of four (4) years mechanical design experience in the consulting engineering field Engineer Intern (EI) certificate from New Mexico SBLPES is a plus Experience with AutoCAD, Revit, and other design related software Significant mechanical and plumbing design experience Experience with federal projects is a plus Please note that Wilson & Company is not currently sponsoring applicants for work visas. Job Location: Albuquerque, New Mexico Annual Salary Range: $60,000 to $110,000+ (based on experience) About Us: For nearly a century, Wilson & Company, Inc., Engineers & Architects, has provided award-winning engineering, architecture, planning, environmental, surveying, geospatial, and construction management services. With employees across multiple offices in the Midwest, Southwest, Rocky Mountain, and Western regions in the United States, we bring people together to practice their craft, create value, and accomplish great things. Guided by our purpose, we help clients move from concept to completion, transforming unused spaces into productive places, underutilized facilities into efficient ones, and rural or urban challenges into achievable solutions. At Wilson & Company, we focus on your specific needs, delivering excellence with lasting Higher Relationships in mind. By employing our core values-discipline, intensity, collaboration, shared ownership, and solutions-we create genuine experiences and lasting connections for our clients, employees, and communities. We support our employees' success and well-being with a comprehensive benefits package, including options for health insurance, life insurance, disability coverage, paid time off, and retirement savings plans. We are proud to be an EEO employer and maintain a drug-free workplace, conducting pre-employment background checks. Join us and be part of a culture committed to helping you achieve personal and professional success.

Parametrix is a 100% employee-owned consulting firm helping clients deliver resilient infrastructure, vibrant and livable communities, and environmentally sustainable solutions. We are a team of professional construction managers, engineers, management consultants, planners, scientists, and surveyors dedicated to delivering outstanding client service. We build lasting partnerships and collaborate with our clients to envision possibilities and create tomorrow, together. We are committed to being a Best Place to Work, offering hybrid work environments that promote meaningful connections, support work-life balance, and encourage career development. With excellent benefits, employee ownership, and a collaborative culture, Parametrix creates a supportive and enriching workplace. About the Role We are seeking a Digital Design Support Technician to join our technology team. In this role, you will support civil engineering staff in the effective use of Autodesk Civil 3D and Bentley OpenRoads Designer, helping ensure these tools are installed, configured, and operating reliably. This position focuses on supporting users, troubleshooting software and configuration issues, assisting with onboarding, and collaborating with IT and CAD leadership to resolve technical problems. It is well suited for someone with a background or exposure to CAD software who enjoys problem-solving, learning technical systems, and helping users work effectively. You Will: * Provide day-to-day support for engineering and design staff using Autodesk and Bentley Design applications. * Configure, and troubleshoot CAD software and related components, including user profiles, workspaces, templates, and add-ins. * Assist with onboarding new team members, ensuring required CAD software and dependencies are installed and functioning properly. * Troubleshoot common issues such as application errors, performance problems, file access issues, and basic project setup concerns, escalating complex design or modeling issues to senior CAD staff as needed. * Collaborate with IT and CAD Services to deploy software updates, apply patches, and validate workstation configurations. * Document common issues, resolutions, and setup steps to help improve internal support knowledge and reduce repeat issues. * Communicate clearly with staff and project teams to set expectations, provide status updates, and confirm resolution of support requests. You Have: * Experience supporting or working with technical software in a professional environment. * Exposure to Autodesk, Bentley, or similar design tools is helpful but not required; training and support will be provided. * A solid foundation in troubleshooting software and workstation issues, with the ability to follow problems through to resolution or escalate when appropriate. * Comfort installing, configuring, and maintaining desktop applications in a Windows environment. * Strong communication skills and the ability to work patiently and effectively with engineers and technical staff. * An interest in learning CAD systems, engineering workflows, and industry-specific tools over time. * An organized, detail-oriented approach to documenting issues, solutions, and setup steps. Compensation Information: Base salary for this position is in the range of $31.25-$43.50/hour. Compensation is determined by factors such as education, experience, location, and role. As employee-owners, we are eligible for performance-based bonuses and our salaries are reviewed annually. Our compensation structure prioritizes transparency and internal pay equity. Why Join Parametrix? Employee Ownership & Great Benefits: As a 100% employee-owned company, you will share in and contribute to Parametrix's success. You will earn stock in your Employee Stock Ownership Plan (ESOP) account and be an important contributor to our collective achievements. Our Benefits include: * Comprehensive Healthcare (medical, dental, vision, short- & long-term disability insurance) * Employee Stock Ownership Plan (financial profit sharing) * Performance-based bonuses * 401(k) Plan * Paid Time Off (both vacation & sick/wellness time accruals) * Paid Holidays * Parental Bonding Leave Exciting, Award-Winning Project Work: Our work earns recognition for its innovation and positive impact on communities, giving you the opportunity to contribute to projects that make a difference. Learn more at ************************************ Flexible Work Arrangements: We understand the importance of work-life balance and offer flexible work arrangements to support our employee-owners' diverse needs. Whether it is hybrid, remote, or in-office, we provide options that allow you to work in a way that best suits your lifestyle while staying connected and engaged with your team. Our Commitment to You Parametrix is committed to being an inclusive workplace, where team members of all backgrounds and experiences are welcome. As an equal opportunity employer, it is our policy and culture to provide opportunities to all persons based on merit and fitness to perform job duties. Employment decisions are based solely on business needs, job requirements, and individual qualifications, without regard to race, color, religion, creed, national or ethnic origin, sex (including pregnancy), sexual orientation, gender identity or expression, marital status, religion, age (40 or older, as protected under the ADEA), disability (including physical, mental, or sensory), genetic information (including testing and characteristics), protected veteran status, or any other status or characteristic protected by applicable federal, state, or local laws or regulations. At Parametrix, we are dedicated to encouraging an inclusive and accessible workplace. If you need any accommodations during the application or interview process, please let us know, and we will work with you to ensure your needs are met. We welcome and encourage candidates from all backgrounds to apply. Ready to join us? Visit our careers site at *********************************** to apply and view all available opportunities at Parametrix.

What to expect from Daniel B. Stephens & Associates (DBS&A), a Geo-Logic Associates Company

Impact Recruitment is looking for a Civil CAD Technician to join our client's Land Development services team in Albuquerque, New Mexico. The candidate we are looking for will work on commercial, residential, and industrial land development projects. Required Experience and Qualifications: Create design drawings for heavy civil infrastructure including mass grading, drainage, roads, tanks, pipelines, concrete structures using AutoCAD Civil 3D. Prepare figures and details using AutoCAD for various reports. Help maintain and update CAD standards for the design group. Efficiently produce final product drawings from concept sketches with moderate technical guidance. Produce accurate 2D and 3D drawings using 3D visualization of terrain, cut and fill slopes, concrete structures, and pipelines. Ability to thoroughly understand 3D geometric relationships within a 2D image. We are looking for talented, motivated, and technically driven individuals who want to join a company with excellent opportunities for career growth and development. This is an immediate opening with outstanding benefits and salary package available commensurate with experience. Reach out to Impact Recruitment at info@impactrecruitment.com/************** to learn more about this position. Impact Recruitment is an equal opportunity employer. Impact Recruitment does not discriminate in recruitment, hiring, or terms or conditions of employment on the basis of race, sex, color, national origin, sexual orientation, religion, age, disability, medical condition as defined under state law, or any other basis prohibited by applicable federal, state, or local law. Impact Recruitment also provides reasonable accommodations to disabled individuals to assist in the hiring process and to qualified individuals with disabilities in the performance of essential job functions, as required by federal, state, or local law.

**Short Description** Bowman has an opportunity for a Survey CAD Technician III to join our team in Albuquerque, NM. At Bowman, we believe in creating opportunities for aspiring people to thrive and achieve ambitious goals. That's why a career at Bowman is more than a job. It is an opportunity to be part of a diverse and engaged community of professionals, to be treated as a respected and valued member of a motivated team and to be empowered to do exceptional work that advances the best interest of everyone involved. We recognize the importance of creating a work environment that is both rewarding to our employees and supportive of our unwavering commitment to provide unparalleled service to our clients. **Purpose** Work with management to prepare and finalize project deliverables and contract documents in accordance with the company standards, municipal / jurisdictional requirements, survey standards, and client requirements. **Responsibilities** **Leadership and Direction** + Perform work under limited supervision. Receive direction on complex assignments with general guidance on execution. Work is generally reviewed by more senior staff to ensure the application of sound techniques and principles. Review work produced by staff for quality assurance. + The position does not include direct supervisory responsibilities but may serve as a lead/resource among a team of colleagues in equivalent roles to share technical proficiency, guidance, and mentorship. May occasionally assist in delegation of assignments or provide feedback to managers. **At the Operational and Company Level** + Interact professionally with internal and external clients. **Do the Work** + Prepare working drawings from ALTA surveys for final approval and submission. + Use critical thinking and problem-solving skills to start and complete projects with limited supervision. May manage multiple projects at one time. + Convert all applicable data into electronically generated drawings and project documents with accuracy, neatness, and speed. + Perform horizontal and vertical computations for boundary surveys and analyses of field location and record information. + Read and understand client requests, municipal / jurisdictional standards and specifications, other project related documents and ensure they are adhered to. + Draft final house location surveys from survey crew field notes and personal field measurements of building improvements. + Compute horizontal and vertical positions of planned buildings, streets, curbs, etc. for stakeouts. Compile and complete. + Check record plats for completeness and accuracy prior to submitting for review. + Submit plots to various municipal / jurisdictional agencies for review. + Use knowledge of ALTA Land Title Surveys, topographic surveys, boundary surveys, residential and commercial construction stakeout procedures and practices when performing work. + Perform a variety of complex computations for traverse, record plats, boundary surveys, construction stakeouts, horizontal control, etc. + Conduct research using Google Earth and/or GIS and data from other agencies. + May complete land development related surveys as well as boundary surveys, ALTA surveys, topographic surveys, construction layout, and subdivision layout (traditional land development work). **Success Metrics and Competencies** + Ability to work both independently and within a team environment. + Ability to effectively communicate with all levels of the organization and external partners. + Highly motivated and problem-solving attitude. + Strong sense of urgency in responding to constituents. + Effective verbal and written communication skills. + Strong work ethic and commitment to quality. + Commitment to promoting the reputation of the company through quality of work. + Desire to seek professional growth and advancement within the company. + Ability to effectively manage multiple time-sensitive tasks. + Data analysis and interpretation skills. **Qualifications** + High school diploma or GED required. + Associate's degree in survey, geography, architecture or civil engineering preferred. Commensurate relevant experience considered. + Five or more (5+) years of relevant survey and/or CAD experience in the land development/land survey industry. + Knowledge of commonly used concepts, practices, and procedures. + Demonstrated proficiency in land surveying and/or surface modeling software such as Carlson, Bentley Inroads/Geopak, Revit, or similar civil engineering design software. + Surveyor-in-Training certificate preferred. + Relevant survey licensure a plus. **About Bowman** Are you ready to build a career that makes a lasting impact? At Bowman, our people are at the center of everything we do. We're committed to creating an environment where employees can thrive both personally and professionally, while helping to shape the infrastructure of tomorrow. A career at Bowman means being part of a collaborative, forward-thinking organization where innovation, inclusion, and growth are encouraged at every level. We offer competitive compensation, a supportive work environment, and benefits designed to help our employees succeed. **Our comprehensive benefits package includes:** + Medical, dental, vision, life, and disability insurance + 401(k) retirement savings plan with company match + Paid time off, sick leave, and paid holidays + Tuition reimbursement and professional development support + Discretionary bonuses and other performance-based incentives + Employee Assistance Program (EAP), wellness initiatives, and employee discounts Eligibility for certain benefits may vary based on position, location, and employment status. **Physical Demands and Working Environment** + Primarily indoor professional office environment and may risk exposure to bright/dim light, noise, fumes, odors, and traffic. + Mobility around an office environment. + Frequent and prolonged use of standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. + May occasionally involve outdoor work environment with possible exposure to outside weather conditions, varying temperatures, excessive noise, and/or potential hazards. + Mobility around a job/construction site to include walking, bending, crawling, climbing, squatting, or kneeling and wearing of required Personal Protective Equipment (PPE). + Primarily local travel during the business day, although some out-of-the-area and overnight travel may be required according to the needs of the business. + Occasional lifting or carrying up to 25 pounds. + Occasional pushing or pulling up to 25 pounds. + Occasional reaching outward or above shoulder. \#LI-MM1 ** Disclaimer** Note: While this job description is intended to be an accurate reflection of the job requirements, it is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary at any time with or without notice. Bowman is proud to be an Equal Opportunity Employer committed to fostering a diverse and inclusive workplace where all employees feel valued and respected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here (*************************************************************** . If you'd like more information on your EEO rights under the law, please click here (************************************************* . Bowman has an obligation to provide and maintain a safe, healthy, and productive environment for its employees and clients. We are committed to maintaining a drug and alcohol-free workplace. If you have any questions about the application process, please email ********************* . Bowman is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please go here: *************************************************************** If you'd like more information on your EEO rights under the law, please go here: *************************************************

NV5 is a provider of engineering and consulting services to public and private sector clients, delivering solutions through six business verticals: Testing, Inspection & Consulting; Infrastructure; Utility Services; Environmental Health Sciences; Buildings & Program Management; and Geospatial Technology. With offices nationwide and abroad, NV5 helps clients plan, design, build, test, certify, and operate projects that improve the communities where we live and work. As engineers, architects, construction/program managers, environmental professionals and beyond, we play a significant role in shaping our communities through the services we provide. We are looking for passionate, driven individuals to join our team focused on Delivering Solutions and Improving Lives . The person in this position is responsible for administering assigned phases of a project. Utilize knowledge of construction process, building materials, specifications and construction techniques. Responsibilities Responsible for design, construction administration and contract administration of project requirements, client and consultant needs. Apply intensive and diversified knowledge of professional principles and practices in broad areas. Knowledge of the unique aspects of the local region architecture Review design and documents for required code compliance Performs job site visits, assess problems and recommends solutions Other duties as assigned Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: Must be actively pursuing professional licensure with the Board of Examiners for Architects and completion of the ARE in the State of NM and must be currently enrolled in a recognized Intern Development Program (IDP) or in procession of Accredited Degree in Architecture with ability to pursue licensure. Must have knowledge of New Mexico building codes. Demonstrated ability to build and study architectural scaled models Proficient with MS Office software; including MS Word, Excel, Proficient in Building Information Management (BIM) Revit software, and computer assisted drafting (CAD) equipment and software. Ability to maintain organization in a changing environment. Ability to multi-task and establish priorities. Ability to communicate effectively both in written format and oral presentation Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures or governmental regulations. Ability to write reports, business correspondence. Ability to effectively present information and respond to questions from groups of peers, managers, consultants and clients. Ability to apply advanced mathematical concepts such as exponents, geometry and equations. Ability to apply mathematical operations to such tasks as structural analysis of building systems NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k) and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Details: Job Title: Mechanical Design Engineer Focus: HVAC Design for DoD & Aerospace Facilities Schedule: Hybrid Salary: $100,000 - $132,000 (Pay offered may vary depending on job related knowledge, skills, and experience.) Client Overview: Our client's High Performance Facilities (HPF) team is seeking an experienced Mechanical Facilities Engineer to provide HVAC and Plumbing design for a wide range of national defense projects in their Albuquerque, NM office. From multi-building campuses to secure facilities across the globe, the HPF team designs and delivers sustainable solutions to meet Government needs for resiliency, readiness, and reliability. Our work directly impacts the operation and efficiency of installations vital to the protection and defense of the United States. WHAT YOU'LL DO The Mechanical Facilities Engineer III will design HVAC and Plumbing/Piping systems for an exciting range of mission critical to mission support projects. Project work will encompass: Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations. Develop mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. Evaluate, select, and apply standard techniques, procedures, and criteria to perform a task or sequence of tasks for projects with less complex features, but also collaborate and use judgment to determine adaptations in methods for non-routine aspects of assignments and more complex projects. Perform engineering quality assurance checks of project designs. Support new project proposals with mechanical discipline scopes, budget estimates, and schedules. Interface with and present designs to Federal, State, and Local government client contacts. The Mechanical Facilities Engineer III will be a key member of a multi-disciplinary team of architectural and engineering staff producing project design packages of drawings, specifications, and calculations. The position includes great leadership opportunity with task assignment and work coordination with engineers, designers, and administrative staff. Periodic travel to other offices or project site locations, including international travel, may be required. REQUIRED QUALIFICATIONS Degree Requirements: Bachelor of Science in Mechanical Engineering from an ABET Accredited Program is required. Engineering Technology degree will not be considered. Minimum eight (8) years of experience - MUST HAVE PE License required. Ability to obtain a Department of Defense security clearance. Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air-handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls). Proficient in editing and writing mechanical construction and equipment specifications. Proficient in Microsoft Word and Excel. Experience using HVAC computer load and design programs such as Trane Trace software; knowledge of Revit building information modeling software; and familiarity with AutoCAD. Working knowledge of ASHRAE, SMACNA, and NFPA standards. Working knowledge of IMC, IPC, and IBC codes. The client projects for this position require U.S. Citizenship. DESIRED QUALIFICATIONS Active Secret clearance with eligibility to obtain Top Secret with SCI LEED or Green Globes accreditation PERKS Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. Robust Employee Referral Program. Annual performance and compensation reviews. Professional Training and Development. Employee Recognition Awards. Peer Mentor Program And Much More! ADDITIONAL INFORMATION Competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). Equal Opportunity Employer, including disability/vets. Employment with this client is contingent upon successful completion of a pre-employment background check and drug screen. Please email me directly with your updated resume' and availability for a phone call @ ****************************** #INDG

Job Description Who we are: Pattison ID helps companies deploy their identity for maximum consistency, engagement and impact across physical and digital branded environments. Our Solutions: We offer architectural, signage, digital services, and maintenance solutions. As one of the largest companies in our industry, with 6 manufacturing facilities, 8 sales and operations offices, and over 1,000 employees across the US and Canada, Pattison ID is committed to offering a culture where team members can achieve their unique career ambitions, while embodying our Core Values of Innovation, Delight, Dependability, Involvement and Drive. Essential Functions: What you'll do: Develop detailed 2D and 3D technical drawings using AutoCAD and Revit based on design concepts, field surveys, and project specifications. Create accurate bills of materials (BOMs) and cutting lists for production. Collaborate closely with the sales, design, engineering, and production teams to ensure designs are optimized for manufacturing efficiency and cost-effectiveness. Interpret architectural plans, client specifications, and engineering requirements to develop appropriate solutions. Identify and resolve design conflicts or technical challenges proactively. Ensure all designs comply with relevant building codes and industry standards. Manage and organize design files, ensuring version control and accessibility. Participate in design reviews and provide technical input and recommendations. Stay up-to-date with the latest software advancements, materials, and manufacturing techniques in the sign industry. Qualifications Proven expertise in Revit and/or AutoCAD is essential. Please highlight your specific experience with these software platforms in your application. Bachelor's degree in Architecture, Industrial Design, Mechanical Engineering, or a related technical field, or equivalent work experience. Minimum of 5 years of experience as a Technical Designer or similar role. Strong understanding of manufacturing processes. Excellent spatial reasoning and ability to visualize complex 3D structures from 2D drawings. High attention to detail and accuracy in all work. Ability to work independently and collaboratively in a fast-paced environment. Strong problem-solving skills and a proactive approach to challenges. Excellent communication skills, both written and verbal. Proficiency with other design software is a plus. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is constantly required to sit and use hands to operate telephone, type and operate computer and mouse. The employee is frequently required to talk, hear, and bend and twist neck. The employee may occasionally lift and/or move up to 10 pounds and rarely lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and distance vision. What We offer: 11 paid holidays 1 Paid Floating Holiday to recognize a special day of significance to you Generous Paid Time Off Policy Comprehensive health, dental, and vision benefits 401K Plan with Company matching, Hybrid Work Model On the job training and development Collaborative and Inclusive work environment Pattison ID operates independently within The Jim Pattison Group, headquartered in Vancouver, and comprised of over 605 locations worldwide. The Jim Pattison Group is broadly based across the automotive, media, packaging, food sales and distribution, magazine distribution, entertainment, export, and financial industries.

Merrick & Company's High Performance Facilities (HPF) team is seeking an experienced Mechanical Facilities Engineer III to provide HVAC and Plumbing design for a wide range of national defense projects in our Albuquerque, NM office. From multi-building campuses to secure facilities across the globe, the Merrick HPF team designs and delivers sustainable solutions to meet Government needs for resiliency, readiness, and reliability. Our work directly impacts the operation and efficiency of installations vital to the protection and defense of the United States. Annual salary range for this position is $102,400.00 - $132,600.00. Base pay offered may vary depending on job-related knowledge, skills, and experience. WHAT YOU'LL DO The Mechanical Facilities Engineer III will design HVAC and Plumbing/Piping systems for an exciting range of mission critical to mission support projects. Project work will encompass: * Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations. * Develop mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. * Evaluate, select, and apply standard techniques, procedures, and criteria to perform a task or sequence of tasks for projects with less complex features, but also collaborate and use judgment to determine adaptations in methods for non-routine aspects of assignments and more complex projects. * Perform engineering quality assurance checks of project designs. * Support new project proposals with mechanical discipline scopes, budget estimates, and schedules. * Interface with and present designs to Federal, State, and Local government client contacts. The Mechanical Facilities Engineer III will be a key member of a multi-disciplinary team of architectural and engineering staff producing project design packages of drawings, specifications, and calculations. The position includes great leadership opportunity with task assignment and work coordination with engineers, designers, and administrative staff. Periodic travel to other Merrick offices or project site locations, including international travel, may be required. REQUIRED QUALIFICATIONS * Degree Requirements: Bachelor of Sciences in Mechanical Engineering. * Minimum eight (8) years of experience. * Professional Engineering (P.E.) License required. * Ability to obtain a Department of Defense security clearance. * Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). * Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air-handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls). * Proficient in editing and writing mechanical construction and equipment specifications. * Proficient in Microsoft Word and Excel. * Experience using HVAC computer load and design programs such as Trane Trace software; knowledge of Revit building information modeling software; and familiarity with AutoCAD. * Working knowledge of ASHRAE, SMACNA, and NFPA standards. * Working knowledge of IMC, IPC, and IBC codes. * The client projects for this position require U.S. Citizenship. DESIRED QUALIFICATIONS * LEED or Green Globes accreditation PERKS * Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. * Robust Employee Referral Program. * Annual performance and compensation reviews. * Professional Training and Development. * Employee Recognition Awards. * Peer Mentor Program * And Much More! ADDITIONAL INFORMATION * Apply online only. No e-mail, hard copy or third-party resumes accepted. * At Merrick, every resume is carefully reviewed by our team of experienced human recruiters-never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage. * Merrick & Company offers a competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). * Merrick is an Equal Opportunity Employer, including disability/vets. * Employment with Merrick is contingent upon completion of a pre-employment background check, MVR check, and drug screen. * Degree Requirements: Bachelor of Sciences in Mechanical Engineering. * Minimum eight (8) years of experience. * Professional Engineering (P.E.) License required. * Ability to obtain a Department of Defense security clearance. * Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). * Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air-handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls). * Proficient in editing and writing mechanical construction and equipment specifications. * Proficient in Microsoft Word and Excel. * Experience using HVAC computer load and design programs such as Trane Trace software; knowledge of Revit building information modeling software; and familiarity with AutoCAD. * Working knowledge of ASHRAE, SMACNA, and NFPA standards. * Working knowledge of IMC, IPC, and IBC codes. * The client projects for this position require U.S. Citizenship. The Mechanical Facilities Engineer III will design HVAC and Plumbing/Piping systems for an exciting range of mission critical to mission support projects. Project work will encompass: * Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations. * Develop mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. * Evaluate, select, and apply standard techniques, procedures, and criteria to perform a task or sequence of tasks for projects with less complex features, but also collaborate and use judgment to determine adaptations in methods for non-routine aspects of assignments and more complex projects. * Perform engineering quality assurance checks of project designs. * Support new project proposals with mechanical discipline scopes, budget estimates, and schedules. * Interface with and present designs to Federal, State, and Local government client contacts. The Mechanical Facilities Engineer III will be a key member of a multi-disciplinary team of architectural and engineering staff producing project design packages of drawings, specifications, and calculations. The position includes great leadership opportunity with task assignment and work coordination with engineers, designers, and administrative staff. Periodic travel to other Merrick offices or project site locations, including international travel, may be required.

Short Description Bowman has an opportunity for a Survey CAD Technician II to join our team in Albuquerque, NM. At Bowman, we believe in creating opportunities for aspiring people to thrive and achieve ambitious goals. That's why a career at Bowman is more than a job. It is an opportunity to be part of a diverse and engaged community of professionals, to be treated as a respected and valued member of a motivated team and to be empowered to do exceptional work that advances the best interest of everyone involved. We recognize the importance of creating a work environment that is both rewarding to our employees and supportive of our unwavering commitment to provide unparalleled service to our clients. Purpose Assist in the preparation of project deliverables and contract documents in accordance with the company design standards and client requirements. Responsibilities Leadership and Direction * Perform work under moderate supervision. Receive direction on moderately complex assignments, tasks, and execution. Work is frequently reviewed by more senior staff to ensure application of sound techniques and principles. Review work produced by junior staff for quality assurance. At the Operational and Company Level * Work closely with more senior staff members to learn and assist in design work. Do the Work * Under supervision, convert all applicable information into electronically generated drawings and project documents with accuracy, neatness, and speed. * Perform horizontal computations for boundary surveys and analyses of field location and record information to determine property lines. * Draft final house location surveys from survey crew field notes and personal field measurements of building improvements. * Compute horizontal positions of planned buildings, streets, curbs, etc. for stakeouts. * Check record plats for completeness and accuracy prior to submitting for review. * Submit plots to county for review. * Gain a thorough knowledge of ALTA Land Title Surveys, topographic surveys, boundary surveys, residential and commercial construction stakeout procedures, and practices. * Perform a variety of complex computations for traverse, record plats, boundary surveys, construction stakeouts, horizontal control, etc. * May complete land development related surveys as well as boundary surveys, ALTA surveys, topographic surveys, construction layout, and subdivision layout (traditional land development work). Success Metrics and Competencies * Ability to effectively communicate with all levels of the organization and external partners. * Highly motivated and problem-solving attitude. * Strong sense of urgency in responding to constituents. * Effective verbal and written communication skills. * Strong work ethic and commitment to quality. * Self-reliance and ability to operate independently with limited direction. * Effective working relationship with internal leaders and peers, as well as external clients. * Data analysis and interpretation skills. Qualifications * High school diploma or GED required, associate's degree in survey, geography, architecture or civil engineering preferred. Commensurate relevant experience considered. * Three or more (3+) years of survey and/or CAD experience in the land development/land survey industry. * Knowledge of basic design concepts and technical calculations. * Knowledge of commonly used concepts, practices, and procedures. * Surveyor-In-Training certificate preferred. * Relevant survey licensure a plus. * Demonstrated proficiency in land surveying and/or surface modeling software such as Carlson, Bentley Inroads/Geopak, Revit, or similar civil engineering design software. About Bowman Are you ready to build a career that makes a lasting impact? At Bowman, our people are at the center of everything we do. We're committed to creating an environment where employees can thrive both personally and professionally, while helping to shape the infrastructure of tomorrow. A career at Bowman means being part of a collaborative, forward-thinking organization where innovation, inclusion, and growth are encouraged at every level. We offer competitive compensation, a supportive work environment, and benefits designed to help our employees succeed. Our comprehensive benefits package includes: * Medical, dental, vision, life, and disability insurance * 401(k) retirement savings plan with company match * Paid time off, sick leave, and paid holidays * Tuition reimbursement and professional development support * Discretionary bonuses and other performance-based incentives * Employee Assistance Program (EAP), wellness initiatives, and employee discounts Eligibility for certain benefits may vary based on position, location, and employment status. Physical Demands and Working Environment * Partly indoor professional office environment which may include bright/dim light, noise, fumes, odors, and traffic. * Mobility around an office environment. * Frequent and prolonged use of standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. * Partly outdoor work environment which may include adverse weather conditions, varying temperatures, excessive noise, and/or potential hazards. * Mobility around a job/construction site to include walking, bending, crawling, climbing, squatting, or kneeling and wearing of required Personal Protective Equipment (PPE). * Frequent and prolonged use of data collection equipment and/or drones, necessitating walking the assigned study area to complete data collection over the course of several hours. * Primarily local travel during the business day, although some out-of-the-area and overnight travel may be required according to the needs of the business. * Occasional lifting or carrying up to 20 pounds. * Occasional pushing or pulling up to 20 pounds. * Occasional reaching outward or above shoulder. #LI-MM1 Disclaimer Note: While this job description is intended to be an accurate reflection of the job requirements, it is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary at any time with or without notice. Bowman is proud to be an Equal Opportunity Employer committed to fostering a diverse and inclusive workplace where all employees feel valued and respected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here. Bowman has an obligation to provide and maintain a safe, healthy, and productive environment for its employees and clients. We are committed to maintaining a drug and alcohol-free workplace. If you have any questions about the application process, please email *********************.

Responsibilities: * Formulate preliminary space plans and sketches that integrate the client's needs * Confirm preliminary space plans and design concepts are safe, functional, aesthetically appropriate, and meet all public health, safety and welfare requirements * Determine selection of colors, materials and finishes to appropriately convey the concept and to meet socio-psychological, functional, maintenance, lifecycle performance, environmental, and safety requirements * Establish selection and specification of furniture, fixtures, equipment and millwork, including layout drawings and detailed product description; and provision of contract documentation to facilitate pricing, procurement and installation of furniture * Coordinate and collaborate with other allied design professionals who may be retained to provide consulting services * Confirm construction documents for non-structural and/or non-seismic construction are signed and sealed by the responsible interior designer, as applicable to jurisdictional requirements for filing with code enforcement officials * Assist with administration of contract documents, bids and negotiations as the client's agent * Provide reporting on the implementation of projects while in progress and upon completion Qualifications: * At least two (2) years of design experience within the commercial real estate market * Preferred Bachelor's degree from an CIDA accredited institution in a related discipline or field of study (i.e. Architecture, --Interior Design, Corporate Real Estate, Facilities, Project or Construction Management, etc.) required, OR Bachelor's degree in Other Major than above plus Interior Design Certification, Degree or Diploma. * Excellent time management, communication, collaboration, and the ability to manage multiple projects and deadlines, in addition to the ability to work independently * Skills coordinating Audio Visual and other specialty consultants Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $ 46,750.00 - $55,000.00 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: "Cushman & Wakefield"

Who we are: Pattison ID helps companies deploy their identity for maximum consistency, engagement and impact across physical and digital signage, and branded environments. Our comprehensive signage solutions, including exterior, interior, wayfinding, and digital signage, redefine how brands connect with their audiences. Our Solutions: We offer architectural, digital services, sign maintenance solutions and flexible leasing options. As one of the largest companies in our industry, with 7 manufacturing facilities, 8 sales and operations offices, and over 1,000 employees across the US and Canada, Pattison ID is committed to offering a culture where team members can achieve their unique career ambitions, while embodying our Core Values of Innovation, Delight, Dependability, Involvement and Drive. Essential Functions: What you'll do: Develop detailed 2D and 3D technical drawings, shop drawings, and fabrication documents using Revit and AutoCAD based on design concepts and project specifications. Create accurate bills of materials (BOMs) and cutting lists for production. Collaborate closely with the sales, design, engineering, and production teams to ensure designs are optimized for manufacturing efficiency and cost-effectiveness. Interpret architectural plans, client specifications, and engineering requirements to develop appropriate sign solutions. Identify and resolve design conflicts or technical challenges proactively. Ensure all designs comply with relevant building codes, ADA requirements, and industry standards. Manage and organize design files, ensuring version control and accessibility. Participate in design reviews and provide technical input and recommendations. Stay up-to-date with the latest software advancements, materials, and manufacturing techniques in the sign industry. Qualifications Proven expertise in Revit and AutoCAD is essential. Please highlight your specific experience with these software platforms in your application. Bachelor's degree in Architecture, Industrial Design, Mechanical Engineering, or a related technical field, or equivalent work experience. Minimum of 5 years of experience as a Technical Designer or similar role, preferably within the sign manufacturing, architectural, or fabrication industries. Strong understanding of manufacturing processes, materials (e.g., metals, plastics, LEDs), and construction methods relevant to sign production. Excellent spatial reasoning and ability to visualize complex 3D structures from 2D drawings. High attention to detail and accuracy in all work. Ability to work independently and collaboratively in a fast-paced environment. Strong problem-solving skills and a proactive approach to challenges. Excellent communication skills, both written and verbal. Proficiency with other design software Inventor, Auto Desk Suite, SolidWorks) is a plus Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is constantly required to sit and use hands to operate telephone, type and operate computer and mouse. The employee is frequently required to talk, hear, and bend and twist neck. The employee may occasionally lift and/or move up to 10 pounds and rarely lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and distance vision. What We offer: 11 paid holidays 1 Paid Floating Holiday to recognize a special day of significance to you Generous Paid Time Off Policy Comprehensive health, dental, and vision benefits 401K Plan with Company matching, Hybrid Work Model On the job training and development Collaborative and Inclusive work environment Special Employee Discounts: Ripley's Believe It or Not, Great Wolf Lodge and other destinations and services Pattison ID operates independently within The Jim Pattison Group, headquartered in Vancouver, and comprised of over 605 locations worldwide. The Jim Pattison Group is broadly based across the automotive, media, packaging, food sales and distribution, magazine distribution, entertainment, export, and financial industries.

Job DescriptionSalary: The CAD Engineer is responsible for creating, managing, and modifying complex CAD and drafting designs. Works closely with engineers and project managers to develop innovative and cost-effective designs that meet the needs of the factory. Primary Responsibilities Create 2D lithography mask layouts in accordance with internal standards. Create 3D models and associated drawings to support manufacturing, testing, and other engineering needs. Support the creation of internal standards and tools for lithography mask layout and other CAD applications. Partner with Project Field Application Engineers and Project Managers to aid design integration into the Fab. Develop test structures and Design of Experiments to validate novel concepts and structures for risk mitigation. Produce data reports that are concise and easy to understand. Work directly and independently with customers to iterate on designs, refining them for successful fabrication. Support pre-fabrication processes, including project onboarding & quoting. Provide support for post-fabrication activities, including testing and assembly operations. Coding and testing software. Create plans and profile drawings. Finding technical solutions to meet a clients goals. Training and offering support and guidance to their team. Additional functions and duties assigned as required. Requirements Bachelors Degree preferred. 3+ years of experience in AutoCAD or other CAD packages. This position will require lawful access to ITAR/EAR controlled information, and employees in these roles will need to meet those requirements. Requirements include US Citizenship due to government contracts. Knowledge, Skills, and Abilities Familiarity with 2D CAD layout with complex Layer configurations (100+ Layers). Ability to read and understand drawings and associated standards. Ability to convert customer drawings into 2D CAD layouts following documented standards. Ability to design 3D CAD models to support mechanical requirements provided by engineering staff. Proficient with Microsoft Office products. Ability to learn software programs such as Autodesk CAD platforms. Excellent communication skills, detail-oriented with strong organizational skills. Physical/Working Requirements Must be able to wear personal protective gear most of the day (where applicable) Prolonged periods of sitting or standing Behavioral Traits Strong verbal and written communication skills to convey quality standards, expectations, and feedback clearly to team members and stakeholders. A willingness to adjust to changing circumstances, processes, or technologies for continuous improvement in dynamic environments. The ability to work well with others, fostering a cooperative atmosphere, driving data management initiatives and engaging all levels of the organization.

Transportation Design Engineer (Entry to Mid-Level) About DJ&A DJ&A is a multidisciplinary consulting firm that delivers a wide variety of professional services to clients nationwide. Our specialties include: transportation design, survey & mapping, sustainability, site development and utilities, construction inspection/management, geospatial solutions, structural design, project management, community involvement, right of way services, and environmental compliance. DJ&A encourages innovation and an environment where every employee feels empowered to thrive. We design projects that serve our communities at every level, from local pedestrian and non-motorized improvements to Interstate freeways. Our work is often situated in the most scenic and inspiring locations -National Forests, Parks, Monuments, recreational facilities, and other public lands-offering unique and rewarding projects that foster career growth and a fulfilling employee experience. Working for DJ&A provides an opportunity to be the problem-solvers who have a positive impact on our communities through sustainable engineering solutions. Founded in 1973 by two former U.S. Forest Service employees who saw a need for a company that uniquely understood Forest Service projects, DJ&A has continued to grow and expand over the last 52 years by embracing the values of our founders. Today, we have a team of 180+ skilled professionals in offices in Missoula, MT (headquarters); Bozeman, MT; Vancouver, WA; Denver, CO; Sioux Falls, SD; Reno, NV; and Albuquerque, NM. Job Summary DJ&A seeks full-time Transportation Design Engineers with 1-10 years of relevant experience. Engineer In Training (EIT) Certificate preferred. Equivalent experience in transportation design may be considered in lieu of formal certification. The ideal candidate is an analytical, organized problem-solver with strong communication skills and a passion for civil engineering. Proven experience with road, highway, and trail design is desired. This is a great opportunity for a motivated, team-oriented professional who seeks to learn and grow in their field while working on a diverse range of infrastructure projects throughout the western U.S. Primary Duties and Responsibilities Support transportation engineering designs for Local, State, and Federal agencies. Provide support for construction administration (in-office and occasional on-site). Participate in the design and delivery of roadway infrastructure projects that vary in size and complexity. Work on multidisciplinary teams in both support and lead roles. Utilize design software, including AutoCAD, Civil 3D, or Bentley MicroStation ORD, to support project design tasks. Perform detailed CAD-based design, including roadway geometric design and corridor modeling. Prepare project deliverables, including quantity calculations, cost estimates, specifications, and construction schedules. Perform quality control checks, ensure code and design standard compliance, and follow QA/QC procedures. This position may require occasional travel, including overnight and weekend stays, primarily for construction inspection and site visits. While the primary role is office based, flexibility to support fieldwork is essential. Required Skills and Abilities: Proficiency in AutoCAD Civil 3D and/or MicroStation OpenRoads. Competency with Microsoft Office Suite software (Word, Excel, etc.). Strong written and verbal communication skills. Excellent planning, organizational, and problem-solving skills. Self-motivated, independent, and results-driven. Ability to meet tight deadlines and collaborate with geographically dispersed teams. Education and Experience: B.S. in Civil Engineering or related engineering field preferred. Relevant experience in transportation design may be considered in lieu of formal education. Familiarity with AASHTO, MUTCD, NACTO, and State DOT design manuals. Physical Requirements: Prolonged periods of sitting and computer use. Ability to lift up to 15 pounds occasionally. Ability to travel to remote project sites. Ability to access and navigate job sites and construction areas with noise, dust, and uneven ground. Willingness to work occasional nights or weekends as project schedules require. Wage and Benefits Salary commensurate with qualifications and experience. $31.50-$47.00/hour depending on experience. Non-exempt employees (prior to professional licensure): overtime paid at 1.5x hourly rate for hours worked over 40/week. Exempt employees (post-licensure): overtime paid as straight time. Medical, dental and vision benefits (monthly HDHP medical premiums fully paid for employee and dependents). Long-term disability and life insurance. Health Savings Account (HSA) or Flexible Spending Account (FSA) with annual company contribution. Roth and 401(k) retirement accounts. Profit sharing and bonus plan. 9/80 work schedule. Paid time off and holidays. Professional licensure reimbursement. Professional development training. Paid volunteer time and community involvement initiatives. Friendly, supportive, knowledgeable staff with a strong team culture! DJ&A is proud to be an Equal Employment Opportunity (EEO) employer. DJ&A is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at ******************.

Job Description Transportation Design Engineer (Entry to Mid-Level) DJ&A is a multidisciplinary consulting firm that delivers a wide variety of professional services to clients nationwide. Our specialties include: transportation design, survey & mapping, sustainability, site development and utilities, construction inspection/management, geospatial solutions, structural design, project management, community involvement, right of way services, and environmental compliance. DJ&A encourages innovation and an environment where every employee feels empowered to thrive. We design projects that serve our communities at every level, from local pedestrian and non-motorized improvements to Interstate freeways. Our work is often situated in the most scenic and inspiring locations -National Forests, Parks, Monuments, recreational facilities, and other public lands-offering unique and rewarding projects that foster career growth and a fulfilling employee experience. Working for DJ&A provides an opportunity to be the problem-solvers who have a positive impact on our communities through sustainable engineering solutions. Founded in 1973 by two former U.S. Forest Service employees who saw a need for a company that uniquely understood Forest Service projects, DJ&A has continued to grow and expand over the last 52 years by embracing the values of our founders. Today, we have a team of 180+ skilled professionals in offices in Missoula, MT (headquarters); Bozeman, MT; Vancouver, WA; Denver, CO; Sioux Falls, SD; Reno, NV; and Albuquerque, NM. Job Summary DJ&A seeks full-time Transportation Design Engineers with 1-10 years of relevant experience. Engineer In Training (EIT) Certificate preferred. Equivalent experience in transportation design may be considered in lieu of formal certification. The ideal candidate is an analytical, organized problem-solver with strong communication skills and a passion for civil engineering. Proven experience with road, highway, and trail design is desired. This is a great opportunity for a motivated, team-oriented professional who seeks to learn and grow in their field while working on a diverse range of infrastructure projects throughout the western U.S. Primary Duties and Responsibilities Support transportation engineering designs for Local, State, and Federal agencies. Provide support for construction administration (in-office and occasional on-site). Participate in the design and delivery of roadway infrastructure projects that vary in size and complexity. Work on multidisciplinary teams in both support and lead roles. Utilize design software, including AutoCAD, Civil 3D, or Bentley MicroStation ORD, to support project design tasks. Perform detailed CAD-based design, including roadway geometric design and corridor modeling. Prepare project deliverables, including quantity calculations, cost estimates, specifications, and construction schedules. Perform quality control checks, ensure code and design standard compliance, and follow QA/QC procedures. This position may require occasional travel, including overnight and weekend stays, primarily for construction inspection and site visits. While the primary role is office based, flexibility to support fieldwork is essential. Required Skills and Abilities: Proficiency in AutoCAD Civil 3D and/or MicroStation OpenRoads. Competency with Microsoft Office Suite software (Word, Excel, etc.). Strong written and verbal communication skills. Excellent planning, organizational, and problem-solving skills. Self-motivated, independent, and results-driven. Ability to meet tight deadlines and collaborate with geographically dispersed teams. Education and Experience: B.S. in Civil Engineering or related engineering field preferred. Relevant experience in transportation design may be considered in lieu of formal education. Familiarity with AASHTO, MUTCD, NACTO, and State DOT design manuals. Physical Requirements: Prolonged periods of sitting and computer use. Ability to lift up to 15 pounds occasionally. Ability to travel to remote project sites. Ability to access and navigate job sites and construction areas with noise, dust, and uneven ground. Willingness to work occasional nights or weekends as project schedules require. Wage and Benefits Salary commensurate with qualifications and experience. $31.50-$47.00/hour depending on experience. Non-exempt employees (prior to professional licensure): overtime paid at 1.5x hourly rate for hours worked over 40/week. Exempt employees (post-licensure): overtime paid as straight time. Medical, dental and vision benefits (monthly HDHP medical premiums fully paid for employee and dependents). Long-term disability and life insurance. Health Savings Account (HSA) or Flexible Spending Account (FSA) with annual company contribution. Roth and 401(k) retirement accounts. Profit sharing and bonus plan. 9/80 work schedule. Paid time off and holidays. Professional licensure reimbursement. Professional development training. Paid volunteer time and community involvement initiatives. Friendly, supportive, knowledgeable staff with a strong team culture! DJ&A is proud to be an Equal Employment Opportunity (EEO) employer. DJ&A is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at ****************** .

At Superior Industries, our manufactured products help produce key ingredients that form the world's infrastructure. This innovative crushing, screening, washing and conveying equipment moves and processes minerals used to build roads and bridges, airports and hospitals and other fundamental societal systems. Although the industries we proudly serve are some of the most time-honored, our spirited culture encourages bold ideas, which consistently create new opportunities for each other. Job Description As a Design Engineer I at Superior Industries, you'll play a key role in the design, development, and implementation of mechanical systems and components for our projects. From concept to manufacturing, you will have the opportunity to contribute to all stages of the engineering process. * Coordinate product design and development for crushing equipment used in processing bulk material and aggregates * Design and detail custom crushing equipment * Perform design analysis for components * Perform testing and prototyping of new products * Create drawings and bills of material that are accurate and contain all information required by production * Evaluate and implement design changes * Other duties as assigned Employee Benefits * Competitive Pay: Weekly paychecks plus the chance to earn $100 cash bonuses * Comprehensive Benefits: Health, dental, vision, life, and disability insurance * Retirement Plans: 401K with a 5% company match * Professional Growth: In-house training in Inventor, AutoCAD, RISA 3D software * Collaborative Environment: Work with a dynamic team where innovation and creativity are key * Work-Life Balance: Flexible work schedules available Qualifications * Bachelor's degree in Mechanical Engineering or related education Traits of Our Successful Employees * Embrace Core Values: Serving Others, High Integrity, Strong Work Ethic, Culture of Opportunity & Long-Term Relationships * Strong organizational and communication skills * Ability to meet deadlines and deliver functional, manufacturable designs that meet customer expectations * Willingness to help out where needed Location: 80 Don Luis Trujillo Blvd, Belen, NM 87002 This position is not eligible for visa sponsorship.

Job Description Longenecker & Associates (L&A) seeks a motivated CAD Design Support team member to contribute to our mission supporting our work at a premier national laboratory in Albuquerque, New Mexico. L&A is a woman-owned small business and trusted partner enabling critical missions across the U.S. Department of Energy (DOE) complex for more than 30 years. We contribute to DOE's nuclear security and environmental remediation enterprise by providing the highest-caliber staff and experts. L&A is unconditionally committed to mission success and the well-being of employees, the nation and the environment. Our team members are passionate about building a healthier environment for generations to come. We are a community that interfaces and effectively communicates with all levels of management and government. If you have a passion for excellence, seek opportunities to engage in mission critical work, and consistently exceed expectations, apply now to join our professional family. POSITION DESCRIPTION The main duties include, but are not limited to: Creating Models and Drawings for the Saturn recap project for 6-12 months; Working closely with mechanical engineers, design engineers, and controls engineers; Cycling through an iterative design process requiring strong configuration management and quality control experience; Collaborating with engineers throughout the drawing phase prior to modeling; and Working with routing, schematics, piping systems, sheet metal, welding and weldments. EDUCATION REQUIREMENTS Associate degree in Computer Aided Drafting and Design Technology (CADD) OR four years of equivalent experience. MINIMUM QUALIFICATIONS Experience using CAD software Creo Parametric and PDMLink tools; Able to apply Geometric Dimensioning and Tolerancing (GD&T) to drawings; Able to acquire and maintain a DOE Q level security clearance; Ability to work in a diverse work environment; Satisfactory results of a pre-employment screening, which includes a background check and drug screening in accordance with Federal requirements (details below); and Ability to fulfill and promote L&A core values. DESIRED QUALIFICATIONS Experience in experimental hardware design; Experience with assembly size in the 1,000s; Experience with Stack Analysis; Experience with routing and schematics; Experience with welding and weldments as well as piping systems and sheet metal; Experience with Windchill; Experience with Pulsed Power Systems (mechanical systems in extreme high current and voltage environments); and Currently hold DOE clearance or equivalent. LOCATION Albuquerque, New Mexico PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management's assignment of essential functions and the descriptions listed do not restrict management's right to assign or reassign duties and responsibilities to this job at any time. PRE-EMPLOYMENT SCREENING Please note that marijuana remains a Schedule I controlled substance under Federal Law. Federal contractors must follow Federal drug-free workplace rules, which prohibit marijuana use, even if medical or recreational use is permitted under State Law. SALARY AND BENEFITS As an L&A employee, you will be eligible for a competitive salary as well as a comprehensive benefits package including healthcare (medical and dental), 401K plan, and paid time off. We believe in investing in our employees beyond compensation and as an L&A employee, you will have access to in-house training, career pathing, mentoring, award programs, tuition reimbursement and much more. L&A is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin, age, or status as a qualified individual with a disability or protected veteran.

Wilson & Company, Inc., Engineers & Architects is currently seeking a Mechanical Designer to support our team in Albuquerque, New Mexico. This position will produce 2D and 3D drawings/models using Revit and AutoCAD. Essential Job Functions: Provide preliminary design documents, such as conceptual designs, technical specifications and site plans for infrastructure and industrial projects. High degree of intrapersonal and communication skills is necessary. Proven teamwork and problem-solving skills. Excellent work ethic and a comprehensive understanding of engineering principles. Process piping design, equipment selection, material lists, contract documents, and drawing review for industrial projects. Modify 2D and 3D models and other drawings. Required Experience: 4 years or more of experience is preferred. Associate Degree in Mechanical Drafter/Design preferred. Good analytical and problem-solving skills. Able to work on multiple assignments at the same time. Experience with Revit, Microstation and AutoCAD highly preferred but not required. Please note that Wilson & Company is not currently sponsoring applicants for work visas. Annual Salary Range: $40,000 - $99,000+ (based on experience) Job Location: Albuquerque, New Mexico About Us: Wilson & Company has a rich history in planning and design, and the right candidate will become part of our bright future. We provide multidisciplinary engineering, architecture, surveying, mapping, environmental, and planning services, and employ staff throughout 16 offices in 9 states. The firm was founded in 1932 and provides services to a diverse client base including railroads; municipal, state, and federal agencies; energy, industrial, and commercial companies; and private developers. The cornerstone of our success is Higher Relationships, standards in Discipline, Intensity, Collaboration, Shared Ownership, and Solutions. Discipline is doing it right, with attention to details without exception. Intensity is doing what it takes to meet and exceed expectations. Collaboration is working together and bringing out the best in each other. Shared Ownership means we adopt the goals of others as our own. Finally, Solutions are achieved in a win-win environment. We value this commitment to Higher Relationships with our employees, clients, and the communities where we live and work. And for you, our culture intends to help you achieve personal and professional success. Come grow with us! Wilson & Company provides a comprehensive benefits package that encourages employee health and well-being. We have several options to choose from for health insurance, life insurance, disability insurance, paid time off, and retirement savings plan benefits. We are proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment background checks. Wilson & Company is a federal contractor and subject to various health and safety regulations enforced by federal, state, and local agencies, as well as health and safety requirements of our clients. Wilson & Company is committed to complying with all regulations and requirements, which could include, but are not limited to, vaccination requirements, testing requirements, masking requirements, and personal protective equipment requirements. All regulations and requirements are subject to change, which could impact Wilson & Company policy and requirements for employees.