Computer aided design designer jobs in Ocean Springs, MS

This job is demanding in terms of knowledge, skills, commitment, and all other job-related qualifications. Urgency and pressure for prompt, accurate results are routine. It requires the handling of multiple tasks with many unexpected interruptions. The job calls for the responsiveness and energy to work long hours and cover a wide scope without letting up on the pace. While training in certain, specific equipment is offered, the successful candidate must be diligent in learning on their own from time to time. * Regular and predictable attendance is essential for this position. * Develop and Modify detailed design of industrial control systems including: o Control panel design including layout and schematics. o Sizing of panels. o Component layout. o AC and DC power distribution, protection and grounding. o Specification of all control panel components. o Networking drawings. o System Architecture drawings. * Clearly identify product and/or customer requirements, and generate specifications based upon those requirements. * Interface directly with internal resources, customers and engineering firms. * Develop and modify drawings as directed by the lead engineer or panel fabrication shop manager using various versions of AutoCAD. * Interpret P&ID, process flows, specifications, and other system design documentation to use as a basis of control system design. * Provide control panel designs compliant with required industry standards (i.e. UL508A). * Maintain current knowledge of control panel design and drafting procedures. * Convert Drawings from AutoCAD to PDF. * Utilize Microsoft Office suite to import bill of materials and other documents into AutoCAD. * Develop and maintain a "library" of commonly used panel components to streamline design of future panels. * Assist engineering in development and enhancements of company-wide standards. Immigrant sponsorship is not available for this position. PLEASE NOTE: John H Carter Company is not accepting unsolicited assistance from search firms/employment agencies for this employment opportunity. Please, no phone calls or emails to any employee of John H Carter Company about this opening. All resumes submitted by search firms/employment agencies to any employee at John H Carter Company via-email, the Internet or in any form and/or method without a valid and executed search firm agreement in place for this position will be deemed the sole property of John H Carter Company; no fee will be paid in the event a candidate is hired by John H Carter Company as a result of the unsolicited referral or through other means. If you wish to become an approved agency to assist us in our employment efforts, please submit your request to: *********************** Please note that this role is not eligible for visa sponsorship/assistance at this time.

Job Description Thompson Engineering is seeking an experienced and detail-oriented Senior CAD Designer II to join our dynamic team. The ideal candidate will be responsible for preparing complex design and drafting assignments using advanced CAD software to support civil, structural, environmental, or multidisciplinary engineering projects. This position requires a proactive, technically skilled professional who thrives in a collaborative environment and is committed to delivering quality and precision in every project. Essential Functions of the Position Create and revise detailed 2D and 3D CAD drawings and models in accordance with project specifications and standards. Collaborate closely with engineers, project managers, and other designers to produce construction documents and design deliverables. Interpret sketches, field notes, and technical data to develop accurate and professional design documents. Apply Thompson Engineering's CAD standards and assist in maintaining consistency and quality across all projects. Support project planning through layout design, quantity take-offs, and coordination with multiple disciplines. Review the work of junior designers for accuracy and provide guidance or mentorship as needed. Participate in project meetings, provide technical input, and communicate effectively across teams. Maintain drawing files, revision control, and project documentation in an organized manner. Minimum Requirements Associate degree in Drafting, Design Technology, or related field; equivalent work experience will be considered. 7-10+ years of progressive experience as a CAD Designer, preferably within civil, structural, or environmental engineering. Proficiency in CAD platforms such as AutoCAD, Civil 3D, MicroStation, or Revit, depending on project needs. Strong understanding of engineering principles, construction methods, and technical standards. Ability to work independently, manage priorities, and deliver quality work under deadlines. Excellent attention to detail and organizational skills. Effective communication skills and the ability to work collaboratively with diverse project teams. Preferred Qualifications Experience in mentoring or leading design teams. Familiarity with BIM workflows and 3D modeling best practices. Working knowledge of DOT or other public-sector design requirements. Previous experience in consulting or multi-discipline engineering environment Physical Requirements Must be willing to work overtime as needed by the department needs. Must be able to operate a computer and sit for long periods of time. Ability to work in the field or outside, able to bend, stoop and climb. About Us: Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Responsive recruiter Benefits: 401(k) Competitive salary Dental insurance Health insurance Paid time off Vision insurance EDUCATION (or) RELEVANT EXPERIENCE: • Certification in Basic Drafting Software with 7+ years of drafting experience; or a Technical Certification in the design discipline with 3+ years of experience. AREAS OF RESPONSIBILITY: Essential Job Functions: Active member of the design team Generate design concepts Generate Submittal and Fabrication Drawings for multiple product types Review/Check quality of design drawings per company standards Organize and participate in design charrettes Answer questions from internal and external customers as required Job Requirements: Need to be familiar with Architectural and Engineering Drawings. Experience with any 3D Modeling Software is required. Experience with Autodesk Inventor / Product Design Suite is a plus. CAD Software we use: AutoDesk Inventor, AutoCAD, Rhino, and AutoDesk Revit/BIM Experience with any CAM software is a plus. CAM Software we use: RADAN Experience with AutoDesk VAULT is a plus. Handle incoming CAD Department inquiries. Review drawing requests for completeness. Prepare Art, Die, Fabrication, and Submittal types of drawings. Prepare full size paper templates for manufacturing and customer use. Help develop and maintain Engineering Drafting Standards. Develop and recommend solutions to design problems. Perform duties as a Drawing Quality Checker for other Drafter's drawings, as assigned. Must have strong Attention to Detail skills. Answer questions from internal and external customers as required. Be able to effectively communicate with Production Staff, Engineers, Sales Staff, Architects, and Installing Contractors. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Gordon, Inc. was founded in Shreveport, Louisiana, 1964. Gordon, Inc., is now located in Bossier City, LA with a state-of-the-art manufacturing facility utilizing over 226,000 square feet, and globally supported by over 70 independent manufacturing representatives. Gordon specializes in sustainable architectural metal products for interior and exterior applications. Product applications include specialty metal ceilings and wall systems, drywall and plaster trims, column enclosures, and many other architectural specialty products. Systems are designed for commercial, acoustical, educational, cleanroom, data center, healthcare, correctional, industrial, and institutional environments. Gordon, Inc. is an award-winning manufacturer and is widely known throughout the industry as the leader in custom architectural specialties. COMPANY BENEFITS: Gordon is an Employee-Owned Company. As an employee of Gordon, Inc., you will participate in the Gordon, Inc. Employee Stock Ownership Plan (ESOP). This Plan allows Gordon Inc employees to share in the value and growth of the company and accumulate ownership in the stock of the company, at no cost. Gordon, Inc. also offers Health, Dental, Voluntary Term Life and Disability Insurance, Employee Assistance Program as well as a comprehensive 401(k) Retirement Plan and paid time off. Gordon is an equal opportunity employer. For more information, please visit our website at: *******************

Job Details Hiller Mobile - Mobile, ALDescription The Hiller Companies, LLC has an immediate opening for CAD Designer. If you are a dedicated professional with a passion for fire protection and safety, we invite you to apply today. The Hiller Companies is a leading provider of fire protection and safety solutions, dedicated to safeguarding lives and property all around the world. Headquartered in Mobile, Alabama, Hiller extends its reach globally as well as in domestic markets with offices across the United States. With over 100 years in the industry, our mission is to ensure the highest standards of safety and innovation in comprehensive fire protection services, including installation, inspection, maintenance, and repair of critical fire and life safety equipment. Our team remains laser-focused on one goal - making the world a safer place. Job Summary: A CAD Designer is responsible for creating detailed technical drawings, plans, and schematics using specialized computer software. CAD Operators play a crucial role in engineering accurate drawings essential for the design and production of our fire systems. Job Responsibilities: CAD Design and Drafting: Utilize CAD software, mostly 2D AutoCAD, to create and modify detailed technical drawings, schematics, layouts, and plans for fire safety systems. This includes fire alarm systems, fire suppression systems, emergency evacuation plans, and other fire safety-related projects. Collaboration with Engineers and Design Teams: Work closely with fire safety engineers, designers, and project managers to understand project requirements and translate conceptual ideas into practical CAD designs. Documentation and Record-Keeping: Maintain an organized record of all CAD drawings, revisions, and updates related to fire safety projects. In addition to drawings, Component Data sheets, Technical Manuals, Certs, and other Contract Data Requirements will be completed as needed. Ensure that the documentation is accurate and accessible for future reference and compliance purposes. Quality Control: Perform thorough reviews of CAD drawings to identify any errors or discrepancies. Verify that all design elements are in line with project specifications and industry standards. Design Optimization: Suggest improvements and modifications to enhance the efficiency, safety, and cost-effectiveness of fire safety system designs. Work towards creating innovative and practical solutions for various fire safety challenges. Compliance and Regulation Adherence: Stay up to date with fire safety codes, regulations, and industry standards to ensure that all CAD designs meet the required safety guidelines and comply with local, regional, and national regulations is a plus but not required. Other duties as assigned. Qualifications What We Are Looking For: High School Diploma / GED, required Bachelor's degree in one of the following fields (or equivalent work experience): Computer-Aided Design Architecture Engineering Related technical field Experience: Proven experience as a CAD Operator, specifically in the Fire Safety or Building Services industry, is highly desirable. CAD Proficiency: Demonstrated expertise in using CAD software primarily AutoCAD. Revit, Solid works, Navisworks, ShipConstructor or other industry-specific CAD tools are a plus. Proficient with Microsoft office Word and Excel. Creating and compiling PDF documents in Adobe and/or Bluebeam. Detail-Oriented: Exceptional attention to detail and accuracy in creating technical drawings and designs. Time Management: Ability to manage multiple projects simultaneously and meet tight deadlines while maintaining high-quality work. Communication Skills: Excellent verbal and written communication skills to effectively collaborate with colleagues and clients. Problem-Solving: A proactive approach to identifying design challenges and finding effective solutions. Adaptability: Willingness to learn and adapt to new software and design methodologies as technology evolves Physical Requirements: While performing the essential functions of this job the employee is regularly required to stand, walk, use hands to finger, handle, or feel, reach with hands or arms, stoop, kneel, crouch, or crawl, and is occasionally required to lift and/or move heavy objects. Ability to lift and carry up to 50 pounds. Capable of standing, walking, bending, and kneeling for extended periods. Hiller is a drug-free workplace, an equal opportunity employer and ADA compliant. We are proud to operate according to our Core Values: Passion to Perform, Trust to Act, Act Responsibly and Make It Fun. Most employee benefits start from the first day of employment, including: Competitive compensation package, including pay advancement opportunities for industry certifications and continuing education Comprehensive benefits package, including health, dental & vision insurance, retirement plans, company paid & voluntary life insurance, company paid short-term disability, voluntary long-term disability, critical illness & accident insurance and paid time off Company-provided training, tools and equipment, including $150 annual boot allowance for employees required to wear safety boots in their jobs Career advancement potential within a growing company. Join us in our mission to provide comprehensive fire protection solutions and peace of mind to our customers and together let's make the world a safer place.

CDM Smith is seeking a Lead Computational Designer to join our Digital Engineering Solutions team. This individual will be a key leader within the Design Technology group, driving the firm's digital transformation in design automation, computational design strategies, and BIM technologies by providing strategic guidance, technological vision, and solution development. This group specifically utilizes visual scripting to apply computational strategies to the design process across our architecture, engineering, and construction (AEC) disciplines, and specializes in BIM, CAD, and digital twin technology from a design technology perspective. This position is for a person who has demonstrated excellence in computational design capabilities, is highly experienced with AEC design technologies, and excels at framing problems, shaping & creating solutions, and championing implementation. As a senior member of the Digital Engineering Solutions team, this person will also engage in research and development and provide strategic oversight to the AEC practices at CDM Smith, engaging in new product research, testing, and the incubation of innovative ideas that arise from around the company. The ideal candidate will have a proven record in the field of computational design technology, with a mindset of continuous learning and curiosity leading to tangible results. Under the direction of the Design Automation Manager, the duties and responsibilities for this position include: - Leading and overseeing projects on the cutting edge of BIM & computation, solving design and process challenges using BIM applications and computational design modeling plug-ins such as Autodesk Revit/Civil3D and Dynamo, Rhino and Grasshopper, Bentley applications and Generative Components, and other associated digital tools and code languages such as Python/C#. - Developing and implementing advanced computational solutions to complex architecture, engineering, and environmental science problems via visual programming. - Providing strategic direction and technical leadership to the team and across the organization. - Mentoring and developing junior and mid-level team members, fostering a culture of continuous learning and innovation. - Collaborating as part of a multidisciplinary team across a global practice, building and maintaining excellent interpersonal relationships. - Leading and driving initiatives and efforts, with your BIM, CAD, and computational design expertise. - Staying at the forefront of the latest developments and advancements, including new and emerging technologies & best practices and new tools & software applications impacting digital design - and how they could impact CDM Smith. - Developing and maintaining documentation, standards, best practices, and workflows for design technology hardware/software in use across the business. - Presenting to both internal and external audiences, representing the company at industry events and conferences. - Performing other miscellaneous tasks associated with being a senior member of the Digital Engineering Solutions team as required. \#LI-LP1 \#LI-REMOTE **Job Title:** Lead Computational Designer **Group:** COR **Employment Type:** Regular **Minimum Qualifications:** Bachelor's degree. 8 years of related experience. Equivalent additional directly related experience will be considered in lieu of a college degree. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. **Preferred Qualifications:** - Expert knowledge and proven ability in the area of AEC design automation/computational design highly preferred. - Extensive experience with visual scripting tools like Dynamo, Grasshopper, and Generative Components. - Proficient in Python and C#, with experience using these languages to create custom tools and integrate with Autodesk Platform Services (APS) and other APIs is considered an asset. - Proficiency in DevOps practices, GitHub, Azure, and/or other development infrastructure, along with knowledge of project management and agile development processes are considered assets. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 5% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Inquisitive, with a desire to ask questions to gain a deeper understanding of business issues. Passionate about helping AEC business lines drive their success in using design technology and design automation. - Excellent written and oral communication skills with the ability to communicate well with people from both technical and non-technical backgrounds. Ability to listen, build rapport, and credibility as a strategic and diplomatic partner with our business units. - Innovative and able to apply critical thinking skills to generate new solutions/ideas that create value and improve processes. - Detail-oriented with the ability to lead and execute highly complex or specialized projects. - Leverages expert-level analytical thinking to proactively identify, assess, and solve sophisticated digital design challenges across multidisciplinary teams. - Excellent understanding of business metrics and the ability to align company goals and objectives with computational design strategies and initiatives. - Demonstrates strong awareness and knowledge of data governance principles, digital design integrity and data management protocols. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $89,336 **Pay Range Maximum:** $147,389 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Fully Remote or Hybrid Work Options may be considered for successful candidate. **Additional Pay Range Information:** The pay range for this position is listed above. This pay range is a good faith estimate representative of all experience levels for this position based on the geographic location assigned to the position. Please note that pay ranges vary based on geographic location. In addition to geographic location, the company considers several other factors when extending an offer including but not limited to the role, function and associated responsibilities, the candidate's work experience, education/training and key skills. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Position Overview:We are seeking talented and motivated marine designers and drafters to support the development of autonomous surface vessels. This role will provide hands-on experience in traditional vessel design and advanced autonomous technologies; driving impact in defense innovation.Responsibilities Support new vessel construction through detailed 2D and 3D modeling and technical drawing production Create and modify ship construction drawings Work directly with naval architects, marine engineers, and electrical engineers on new vessel design implementation Maintain strict drawing standards Create documentation for marine regulatory compliance Qualifications Associate degree or technical certification in Drafting, Engineering Technology or similar field of study Minimum 3 - 5 years of CAD drafting experience Strong fundamentals in one or more areas of vessel design: general design, mechanical design, electrical design, structural design, and piping design Knowledge of maritime regulatory requirements, construction tolerances, and vessel construction processes and sequences Proficiency with 2D and 3D CAD software like NX, ShipConstructor, AutoCAD, and Rhino Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 100% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands: Prolonged periods of sitting at a desk and working on a computer. Occasional standing and walking within the office. Manual dexterity to operate a computer keyboard, mouse, and other office equipment. Visual acuity to read screens, documents, and reports. Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies. Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages). This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3) Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

CAD Drafter & Technical Specialist Summary Description: The basic function of the CAD Drafter & Technical Specialist is to use computer software to create detailed technical drawings and plans for marine and industrial construction projects, including lift plans, job construction plans, survey layouts, construction templates, project detailing, and the like; perform project scheduling using Microsoft Project Scheduling, P6 Scheduling, and the similar software programs; conduct surveys, field inspections, and field measurements (pre-construction, mid-construction, and post-construction); gather information and data; create, draft, and present presentations, surveys, reports, letterhead proposals, spreadsheets, and the like; provide layouts; create drawings; perform material takeoffs; perform inspections; and assist in the various phases of marine and industrial construction projects. This role requires a strong understanding of marine engineering principles, excellent attention to detail, and proficiency in CAD (computer-aided design) and other computer software and in using surveying equipment. Worksite Location(s): The company headquarters is in Harvey, Louisiana. Most of the work will be performed in the office, but there will be some field and site work from time to time. Company Description: Stewart Construction, LLC provides a wide variety of industrial and marine construction services, including fabrication, assembly, installation, maintenance, and repair of docks, wharfs, pilings, dolphins, fender systems, coffer dams, intake and outtake systems, ship and barge material handling systems, and other, similar systems and structures, as well as demolition and removal services. Minimum Qualifications: 18+ years of age. Authorized to work in the United States. Reliable transportation to and from work. Must be able to pass a drug-screen. Must be able to pass a background investigation. Must pass be able pass a fit-for-duty examination. TWIC (Transportation Worker Identification Credential) Eligible to enroll in the DISA program. Proficient in CAD software (e.g., AutoCAD, SolidWorks). Proficient in Microsoft Suite (Word, Excel, PowerPoint, Outlook, etc.); Adobe; and Bluebeam. Proficient in land surveying equipment. Preferred Qualifications: Associate or bachelor's degree or diploma in Drafting, Engineering Technology, Construction Management, or a related field. 5+ years of experience as a structural or mechanical Drafter (preferably at an engineering firm). Certification from ADDA (American Design Drafting Association) or similar institution. Benefits, Perks, and Opportunities: Regular, full-time employment. Competitive wages. Health insurance. Dental insurance. Employee Assistance Program (EAP). 401(k) retirement plan. Opportunities for professional development and advancement. Positive and supportive work environment. Stewart Construction, LLC is an equal opportunity employer. View all jobs at this company

Mandeville, LA Must be a US Citizen or Green Card holder. Air Systems Design, Inc. is seeking a skilled Drafting Designer to join our team. The ideal candidate must be proficient in Revit, Vault, Inventor, AutoCAD, and Navisworks and have strong drafting and design experience. The position is full-time, Monday through Friday, from 8:00 AM to 4:30 PM. Compensation will be determined based on the candidate's knowledge and experience. QUALIFICATIONS AND RESPONSIBILITIES: Proficiency in: Revit, Vault, Inventor, AutoCAD, and Navisworks Certifications Required: Excel, Vault, and Inventor Preferred Certification: Revit (a plus) Revise CAD drawings per engineering markups Perform engineering support tasks under direct supervision (e.g. transmittals) Learn and apply the corporate/client standard of drafting and engineering practices Learn and properly use document management systems Take personal responsibility for the quality and accuracy of his/her work Bring potential project-related problems and possible solutions to the attention of the responsible party Travel out of town for short periods of time as required by projects and assignments Perform other duties as assigned Required Knowledge, Skills, and Abilities: (Companies ATS Questions): 1. Do you have Proficiency in: Revit, Vault, Inventor, AutoCAD, and Navisworks 2. Do you have Certifications required: Excel, Vault, and Inventor 3. Do you have Strong communication, ability to work well with minimal supervision, and organizational skills 4. Do you have Revit certification a plus 5. Must be a US Citizen or Green Card holder.

The Mechanical Designer will provide computer aided design (CAD) drafting and prepare drawings and schematics derived from a variety of specifications, layouts, blueprints, and sketches. This will be accomplished through use of computer aided drawing software and other techniques, standards, and tools to prepare technical drawings. Responsibilities include: Design components and assemblies such as machined components, sheet metal components, weldments, pipe routing, cable routing, 3D printed parts, injection molding parts, mechanical assemblies, electrical assemblies, etc. Transform initial rough product designs into working documents using CAD software. Review engineer drawings and designs to ensure adherence to established specifications and standards. Work closely with engineers and other professionals to create component and systems designs or processes and develop drawings for a wide variety of components and systems. Identify and implement opportunities to improve designs, reduce cost and lead time, and reduce risk. Requirements AS in Design or related field 3+ years of relevant experience Secret DoD Clearance or the ability to obtain a Secret DoD Clearance Experience with GD&T Experience with SolidWorks and/or AutoDesk Inventor Experience designing custom machined components, large assemblies, and piping systems Desired Configuration Management experience and/or experience with PDM Note: ATS is a drug-free workplace. The unlawful manufacture, distribution, dispensing, possession, or use of a controlled substance is prohibited. All candidates who receive conditional offers of employment are subject to drug testing. In addition, ATS is an E-Verify employer. Export Control Regulations:Applicants for employment at ATS must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Impact Recruitment is seeking a highly motivated, detailed-oriented individual that has strong Auto CADD skills applicable with private and municipal land development, road, and utility design. Candidates should have 5+ years of experience in land development; including site plan design, roadways, permitting, erosion/sediment control (ESC) design, and experience in stormwater management (SWM). Utility work experience, i.e., laying out water mains, sewer (gravity or force mains), gas pipelines, etc. a plus. Responsibilities: Perform design, drafting and project related tasks on assigned projects. Transform base map information and designs into CADD produced drawings using appropriate software. Assist in the set up and drafting of project base maps by analyzing utility drawings and sketches, notes and other input material to determine the best approach for the completion of drawings. Work from detailed sketches to produce computer-generated plans, profiles and section drawings. Strong knowledge of site grading and drainage. Strong knowledge of infrastructure design to include sewer, water and paving. Qualifications : High School Diploma/Equivalent; Associates Degree or a Certificate from a technical school, preferably in AutoCAD. Minimum 2 years of Civil 3D and MicroStation experience preferred Excellent and professional verbal and written communication skills. Ability to work independently to effectively manage time and work in a team environment. Reach out to Impact Recruitment at info@impactrecruitment.com/************** for more information regarding this position! Impact Recruitment is an equal opportunity employer. Impact Recruitment does not discriminate in recruitment, hiring, or terms or conditions of employment on the basis of race, sex, color, national origin, sexual orientation, religion, age, disability, medical condition as defined under state law, or any other basis prohibited by applicable federal, state, or local law. Impact Recruitment also provides reasonable accommodations to disabled individuals to assist in the hiring process and to qualified individuals with disabilities in the performance of essential job functions, as required by federal, state, or local law.

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Specialty Services is looking to hire a Draftsman/IDMS with experience in PCMS and AutoCAD drafting for a full-time position located in the Baton Rouge, LA area. This position drafts detailed construction drawings, topographical profiles and related maps and specification sheets used in planning and construction. Non-exempt role; Reports to Drafting Supervisor, Engineer or AutoCAD Designer; Performs a variety of routine duties within established policies. Essential Qualifications: High school or equivalent Minimum two (2) years of drafting experience or equivalent combinations of experience and training Experience in PCMS and AutoCAD drafting Experienced in CAD software to create drawings and/or ability to create drawings manually Must possess excellent communication, interpersonal, organizational and problem solving skills No per diem, local candidates only Post offer drug / alcohol screen, physical evaluation, and signed acceptance of the Turner Industries Drug, Alcohol and Contraband Policy Comply with company and client job site safety requirements Must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Plots maps and charts showing profiles and cross-sections, indicating relation of topographical contours and elevations to buildings, retaining walls, tunnels, overhead power lines, and other structures; drafts detailed drawings of structures employing structural reinforcing steel, concrete, masonry, wood and other structural material; produces plans and details of foundations, building frame, floor and roof framing and other structural elements; may accompany survey crew in the field to locate grading markers or to collect data required for revision of construction drawings; perform additional assignments per supervisor's direction Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; typing / data entry; stepstool use; work in excessive heat; work in excessive cold; work in loud environment Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: drafter, draftsman

Job Description COMPANY HISTORY , LLC: Founded in Adamsville, Alabama, in 1986, C&B Piping, LLC., is a full-service manufacturer and supplier of ductile iron piping systems, with a primary focus on the water and wastewater treatment industry nationwide. We fabricate a full range (3" - 64"+) of ductile iron pipe and now we are expanding our steel fabrication and piping capabilities to better serve our customers. At C&B Piping, LLC., we have more manufacturing machines for ductile iron pipe under one roof than any other ductile iron fabricator in the country. We are also one of the largest licensed applicators of Protecto 401 Ceramic Epoxy and Ceramapure PL90 linings. Our headquarters and primary manufacturing facility is now located in Leeds, Alabama, while our Gilbert, Arizona fabrication and linings/coatings facility proudly serves our western United States customers, and our Amhurst, Virginia facility proudly serves our Eastern United Stated Customers. C&B Piping, LLC., is now an independent subsidiary of AMERICAN Cast Iron Pipe Company, so we're stronger than ever! Our original founder, Mr. Curtis Estes, said it best, "Our goal is not to be the largest supplier, but to be the BEST supplier in the industry." Our VISION remains: We work for incredible CUSTOMERS; we work alongside great PEOPLE. We partner with great SUPPLIERS. We build TRUST with EVERYONE. We strive to be the BEST. From the Beginning, C&B Piping, LLC. was built on integrity, doing what's right for our customers, our team, and our community. We are building much more than ductile piping, our craftsmanship, innovation, and unwavering customer care begins with our people and if you are looking for a place to share this commitment to while creating incredible projects and surpassing our customers' expectations then, Welcome HOME to C&B Piping, LLC! Our CAD Piping Designers: Prepare and revise 3-D models using BIM software. Create and update 2-D engineering drawings and 3-D models according to C&B Piping's standards and procedures in Autodesk Revit. Develop and modify equipment layout, piping, instrumentation, mechanical, civil, structural, and architectural drawings. Creates, revises, and executes designs from sketches, plans, and written or verbal instructions. Utilize the Redline system, ensuring all updates are consistent throughout drawing sets. Communicate effectively with project engineers, managers, contractors, and manufacturing staff as required. Provide input on company graphics, standards, and drafting procedures; helping maintain and improve design documentation practices. Support engineering through tasks including plotting drawings, filing originals, and creating PDF's. Testing CAD/CAE software updates for compatibility and functionality. Perform other drafting or design support duties as needed and/or assigned. Education and/or Work Experience Requirements: Qualifications and Skills: Education: Associate's degree in computer aided drafting/design or related field. Previous relevant work experience can be used to substitute education requirements. Experience: 1-3 years of experience using two or more CAD Software packages: (AutoCAD, MicroStation, Speedikon, COMOS, or E3D). Proficiency with Autodesk Revit modeling software. Prior experience in engineering or construction projects is a plus! Skills: Strong communication and collaboration skills let's work together! Proficiency in Microsoft Word, Excel, and PowerPoint. Ability to work independently with minimal supervision. Organized, punctual, adaptable, and professional. Ability to manage changing priorities in a fast-paced environment. Physical Requirements: Physical and Work Environment: Primarily office-based; minimal exposure to adverse conditions. Light physical effort in a sedentary environment. Occasional tasks may involve some lifting, carrying, pushing, and/or pulling of objects and materials (Possibly up to 10 lbs.) Occasional travel to visit job sites or industrial/commercial facilities. This position is an on-site role, not remote or hybrid. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Perks and Benefits: We're proud to offer competitive and comprehensive benefits package that supports you and your family, including: Medical, Dental, and Vision Insurance. Prescription Coverage Flexible Spendings Account (FSA) Company-Paid Basic Life Insurance and Short-Term Disability (at no cost to you!) Long-Term Disability Coverage Voluntary Life Insurance for you and your family 401(k) Retirement Plan with Impressive Company Match Paid Vacation and Holidays Employee Assistance Program (EAP) Gainshare Bonus Program rewarding team performance Job Posted by ApplicantPro

Two Perimeter Park South Birmingham Alabama 35243-3393 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. A Brief Summary of This Position: This is an individual contributor position in the Lighting and Transportation division. The incumbent reads and interprets customer order information. This position processes orders for production and customer submittal drawings, consistent with Valmont standard practices, in the moderate to high range of complexity, and prepares the necessary drawings and other data for the teams, other departments and the manufacturing facilities, as well as interfaces, with direction from the Site Drafting Manager/Drafting Supervisor, directly with other company departments on customer order and manufacturing problems. Customer contact may be required to aid the design/order process. The Drafting Department is responsible for processing drawings for customers and the manufacturing facilities while maintaining the company objectives for quality and lead-time. This Individual Contributor role must interact with people in all departments in order to maintain amiable and profitable relationships in inter-departmental communication. The incumbent will, with required supervision, read and interpret customer specifications, plans and other order information to determine the format required to complete customer orders. He/she will be responsible for reporting any inconsistent, conflicting or missing customer information to the Drafting Supervisor or a Senior Design Drafter. The incumbent shall have knowledge of departmental and company goals, policies and procedures and the product lines represented. Deviations from these shall be minimal and only when beneficial to the department, division and company. This position is important to the results of the department and the division. The incumbent is allowed to establish work routines and/or schedules, within company policies, in order to maintain efficient order flow. He/she may identify, recommend and help develop revisions to standard product designs, drafting procedures and systems to improve the department and the division. Essential Functions: This position reports into the site Drafting Supervisor and has no direct or indirect reports This role requires no travel Analyze all information necessary to process an individual order accurately and efficiently Manage the department backlog by monitoring order schedules, providing updates to computerized backlog and meeting “Promises Kept” in accordance with departmental priorities Maintain required productivity output in accordance with departmental priorities Maintain required order accuracy in accordance with departmental priorities Maintain a cooperative and professional attitude in dealing with all departments of the company Maintain and update an accurate filing system of customer requirements Maintain an awareness of current Drafting policies and procedures Maintain an awareness of current manufacturing capabilities and limitations Identify, recommend and help implement changes to standard drafting procedures and systems Identify, recommend and help implement changes to standard designs to improve customer acceptance or reduce product cost Handle special assignments as requested by Drafting Supervisor/Manager When necessary, provide assistance to all departments in the interpretation of customer specification, manufacturing capabilities or drafting procedures Provide technical or drafting support of any department, for any project which will enhance product or company interest Maintain appropriate professional competencies, certifications, licenses, etc., necessary to perform job duties Review and approve drafting prints created by other drafters per department policy Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities): High School diploma and 2+ years of work/educational experience One year drafting experience in division market channel Technical skills in computer aided drafting and basic understanding of mathematics normally acquired through an Associate of Applied Science degree and/or related experience (includes Algebra, Geometry and Trigonometry) A solid background in 3-D modeling techniques Previous PC experience a must, including intermediate level knowledge of Microsoft Office (Word, Excel and Outlook) and AutoDesk (AutoCAD and Inventor) Understanding of the end use of the product and knowledge of the fabrication and manufacturing processes used to make the product Demonstrated ability to read and interpret customer specifications, plans and other order information to determine the format required to complete customer orders Ability to identify any inconsistent, conflicting or missing customer information and determine the correct course of action to resolve the issues with some assistance from a Division Drafting Manager/Drafting Supervisor or Senior Design Drafter High level of proficiency regarding Valmont's drafting processes and systems Demonstrated strong professional interpersonal, verbal, and written communication skills Demonstrated ability to keep a positive, professional attitude in a fast-paced environment subject to specific deadlines which must be met Must possess strong problem solving skills, with attention to detail and a number/math orientation Highly Qualified Candidates Will Also Possess These Qualifications: Associates Degree in Drafting Autodesk Inventor 2013 or newer version AutoCAD 2013, PDF (Nitro Pro), Zoom, Inventor 2019, Scientific Calculator and Drafting Equipment knowledge/experience Past experience in structural steel drafting and checking Working Environment and Physical Efforts: Work is typically performed in an office setting. The incumbent is regularly required to sit for extended periods of time, as well as talk and listen on the phone and in personal conversations or meetings. Environment is fast paced and demanding most of the time. No travel requirements for this position. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms while working in the office with various files and forms and while working on the computer. The employee is occasionally required to move about the office. Incumbent must utilize proper ergonomic safeguards such as monitor height and positions, keyboard location and height and proper wrists rests. The employee must occasionally lift and/or move up to 15 pounds in working with large files, binders, and computer equipment. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and depth perception. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.

Job Description Posting Name: Mechanical Designer II Schedule: M - T, 6:00 AM - 3:30 PM and Friday, 6:00 AM - 10:00 AM Join the Birdon team and help ensure USCG boats are safe and reliable! Our Mechanical Designers are an integral piece of our work on a daily basis. Some of your daily functions will include: Develop SolidWorks 3D models and associated 2D drawings for existing and new products. Meets daily with design team to identify and escalate roadblocks to remove barriers. Creator of Engineering Change Notifications to formally define design data. Initiates Engineering Change Requests when improvements, modifications, or errors are identified in released designs. Create drawings to assist manufacturing with tools, jigs, fixtures. Troubleshoot installation issues and recommend solutions. Ability to select vendor hardware/parts that are compatible with systems and customer requirements. Organize and maintain drawing file configurations and storage. If you have at least 5 years' experience as a Mechanical Designer, possess a High School Diploma or GED and fundamental knowledge in marine or manufacturing industry, we want to talk to you! Birdon is committed to the HEALTH and SAFETY of our workforce and to the ENVIRONMENT, we expect this same commitment from all employees. Birdon America Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Know Your Rights The Company invites any applicant and/or employee to review the Company's written Affirmative Action Plan. This plan is available for inspection upon request by emailing ************. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact ************ for further assistance.

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Position Overview:We are seeking talented and motivated marine designers and drafters to support the development of autonomous surface vessels. This role will provide hands-on experience in traditional vessel design and advanced autonomous technologies; driving impact in defense innovation.Responsibilities Support new vessel construction through detailed 2D and 3D modeling and technical drawing production Create and modify ship construction drawings Work directly with naval architects, marine engineers, and electrical engineers on new vessel design implementation Maintain strict drawing standards Create documentation for marine regulatory compliance Qualifications Associate degree or technical certification in Drafting, Engineering Technology or similar field of study Minimum 3 - 5 years of CAD drafting experience Strong fundamentals in one or more areas of vessel design: general design, mechanical design, electrical design, structural design, and piping design Knowledge of maritime regulatory requirements, construction tolerances, and vessel construction processes and sequences Proficiency with 2D and 3D CAD software like NX, ShipConstructor, AutoCAD, and Rhino Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 100% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands: Prolonged periods of sitting at a desk and working on a computer. Occasional standing and walking within the office. Manual dexterity to operate a computer keyboard, mouse, and other office equipment. Visual acuity to read screens, documents, and reports. Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies. Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages). This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3) Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

CDM Smith is seeking a Lead Computational Designer to join our Digital Engineering Solutions team. This individual will be a key leader within the Design Technology group, driving the firm's digital transformation in design automation, computational design strategies, and BIM technologies by providing strategic guidance, technological vision, and solution development. This group specifically utilizes visual scripting to apply computational strategies to the design process across our architecture, engineering, and construction (AEC) disciplines, and specializes in BIM, CAD, and digital twin technology from a design technology perspective. This position is for a person who has demonstrated excellence in computational design capabilities, is highly experienced with AEC design technologies, and excels at framing problems, shaping & creating solutions, and championing implementation. As a senior member of the Digital Engineering Solutions team, this person will also engage in research and development and provide strategic oversight to the AEC practices at CDM Smith, engaging in new product research, testing, and the incubation of innovative ideas that arise from around the company. The ideal candidate will have a proven record in the field of computational design technology, with a mindset of continuous learning and curiosity leading to tangible results. Under the direction of the Design Automation Manager, the duties and responsibilities for this position include: - Leading and overseeing projects on the cutting edge of BIM & computation, solving design and process challenges using BIM applications and computational design modeling plug-ins such as Autodesk Revit/Civil3D and Dynamo, Rhino and Grasshopper, Bentley applications and Generative Components, and other associated digital tools and code languages such as Python/C#. - Developing and implementing advanced computational solutions to complex architecture, engineering, and environmental science problems via visual programming. - Providing strategic direction and technical leadership to the team and across the organization. - Mentoring and developing junior and mid-level team members, fostering a culture of continuous learning and innovation. - Collaborating as part of a multidisciplinary team across a global practice, building and maintaining excellent interpersonal relationships. - Leading and driving initiatives and efforts, with your BIM, CAD, and computational design expertise. - Staying at the forefront of the latest developments and advancements, including new and emerging technologies & best practices and new tools & software applications impacting digital design - and how they could impact CDM Smith. - Developing and maintaining documentation, standards, best practices, and workflows for design technology hardware/software in use across the business. - Presenting to both internal and external audiences, representing the company at industry events and conferences. - Performing other miscellaneous tasks associated with being a senior member of the Digital Engineering Solutions team as required. \#LI-LP1 \#LI-REMOTE **Job Title:** Lead Computational Designer **Group:** COR **Employment Type:** Regular **Minimum Qualifications:** Bachelor's degree. 8 years of related experience. Equivalent additional directly related experience will be considered in lieu of a college degree. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. **Preferred Qualifications:** - Expert knowledge and proven ability in the area of AEC design automation/computational design highly preferred. - Extensive experience with visual scripting tools like Dynamo, Grasshopper, and Generative Components. - Proficient in Python and C#, with experience using these languages to create custom tools and integrate with Autodesk Platform Services (APS) and other APIs is considered an asset. - Proficiency in DevOps practices, GitHub, Azure, and/or other development infrastructure, along with knowledge of project management and agile development processes are considered assets. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 5% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Inquisitive, with a desire to ask questions to gain a deeper understanding of business issues. Passionate about helping AEC business lines drive their success in using design technology and design automation. - Excellent written and oral communication skills with the ability to communicate well with people from both technical and non-technical backgrounds. Ability to listen, build rapport, and credibility as a strategic and diplomatic partner with our business units. - Innovative and able to apply critical thinking skills to generate new solutions/ideas that create value and improve processes. - Detail-oriented with the ability to lead and execute highly complex or specialized projects. - Leverages expert-level analytical thinking to proactively identify, assess, and solve sophisticated digital design challenges across multidisciplinary teams. - Excellent understanding of business metrics and the ability to align company goals and objectives with computational design strategies and initiatives. - Demonstrates strong awareness and knowledge of data governance principles, digital design integrity and data management protocols. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $89,336 **Pay Range Maximum:** $147,389 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Fully Remote or Hybrid Work Options may be considered for successful candidate. **Additional Pay Range Information:** The pay range for this position is listed above. This pay range is a good faith estimate representative of all experience levels for this position based on the geographic location assigned to the position. Please note that pay ranges vary based on geographic location. In addition to geographic location, the company considers several other factors when extending an offer including but not limited to the role, function and associated responsibilities, the candidate's work experience, education/training and key skills. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Thompson Engineering is looking for a structural Autocad / REVIT Designer to join our team. The Structural Designer I & II is an entry level position up through 5 years of professional work experience. The Designer works closely with Structural Engineers and Architects to perform structural drafting assignments in either Autocad or REVIT. The position requires learning Thompson Engineering's drafting standards and procedures for projects involving buildings, coastal piers and bulkheads, industrial support structures, deep foundations, and other similar structures. The Designer should be well organized, have good verbal communication and problem-solving skills, and have a strong aptitude for follow-through. Essential Functions of the Position Capable of adhering to existing drafting standards and utilizing them properly. Knowledgeable in the operation of Autocad and REVIT software. Able to effectively work both independently and as a part of a larger team, on multiple, short-duration assignments or on single, large, multi-discipline projects. Able to manage the pressures associated with fast-paced environments, critical design tolerances, and tight schedules. Able to adapt his/her schedule to meet needs as they arise (i.e., able to occasionally come in early or stay late to respond to a client's last-minute request). Provide input to the engineer for the resolution of queries from clients or third parties. Must follow company policies and procedures regarding safety and quality. Make occasional field site visits to collect existing structure data and/or dimensions. Minimum Requirements Associates Degree in CAD/Drafting or equivalent preferred, and 0 - 5 years' experience in structural drafting of commercial and/or industrial projects. Must have practicable and verifiable knowledge of AutoCAD and REVIT software. Capable of adhering to existing Drafting/Quality standards and utilizing them properly. The ability to make geometric mathematical computations accurately. The ability to express ideas clearly and concisely, both orally and in writing. Physical Requirements Must be willing to work overtime as needed by the department needs. We estimate 40 hours per week with limited overtime expected. Must be able to operate a computer and sit for long periods of time. Ability to work in the field or outside, able to bend, stoop and climb. About Us: Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Specialty Services is looking to hire a Draftsman/IDMS with experience in PCMS and AutoCAD drafting for a full-time position located in the Baton Rouge, LA area. This position drafts detailed construction drawings, topographical profiles and related maps and specification sheets used in planning and construction. Non-exempt role; Reports to Drafting Supervisor, Engineer or AutoCAD Designer; Performs a variety of routine duties within established policies. Essential Qualifications: * High school or equivalent * Minimum two (2) years of drafting experience or equivalent combinations of experience and training * Experience in PCMS and AutoCAD drafting * Experienced in CAD software to create drawings and/or ability to create drawings manually * Must possess excellent communication, interpersonal, organizational and problem solving skills * No per diem, local candidates only * Post offer drug / alcohol screen, physical evaluation, and signed acceptance of the Turner Industries Drug, Alcohol and Contraband Policy * Comply with company and client job site safety requirements * Must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Plots maps and charts showing profiles and cross-sections, indicating relation of topographical contours and elevations to buildings, retaining walls, tunnels, overhead power lines, and other structures; drafts detailed drawings of structures employing structural reinforcing steel, concrete, masonry, wood and other structural material; produces plans and details of foundations, building frame, floor and roof framing and other structural elements; may accompany survey crew in the field to locate grading markers or to collect data required for revision of construction drawings; perform additional assignments per supervisor's direction Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; typing / data entry; stepstool use; work in excessive heat; work in excessive cold; work in loud environment Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: drafter, draftsman

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Specialty Services is looking to hire a Draftsman/IDMS with experience in PCMS and AutoCAD drafting for a full-time position located in the Baton Rouge, LA area. This position drafts detailed construction drawings, topographical profiles and related maps and specification sheets used in planning and construction. Non-exempt role; Reports to Drafting Supervisor, Engineer or AutoCAD Designer; Performs a variety of routine duties within established policies. Essential Qualifications: High school or equivalent Minimum two (2) years of drafting experience or equivalent combinations of experience and training Experience in PCMS and AutoCAD drafting Experienced in CAD software to create drawings and/or ability to create drawings manually Must possess excellent communication, interpersonal, organizational and problem solving skills No per diem, local candidates only Post offer drug / alcohol screen, physical evaluation, and signed acceptance of the Turner Industries Drug, Alcohol and Contraband Policy Comply with company and client job site safety requirements Must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Plots maps and charts showing profiles and cross-sections, indicating relation of topographical contours and elevations to buildings, retaining walls, tunnels, overhead power lines, and other structures; drafts detailed drawings of structures employing structural reinforcing steel, concrete, masonry, wood and other structural material; produces plans and details of foundations, building frame, floor and roof framing and other structural elements; may accompany survey crew in the field to locate grading markers or to collect data required for revision of construction drawings; perform additional assignments per supervisor's direction Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; typing / data entry; stepstool use; work in excessive heat; work in excessive cold; work in loud environment Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: drafter, draftsman Job Posted by ApplicantPro