Computer numerical controller machinist jobs in Bethesda, MD

At Aurora Flight Sciences, we design, build, and fly advanced aircraft and enabling technologies from concept to reality. We are searching for a talented and self-motivated CNC Machine Operator to help us create the future of flight. Responsibilities will include but not be limited to the following: Responsibilities * Machining work via work orders, engineering drawings, materials, specifications, reference planes, locations of surfaces, interpreting geometric dimensions and tolerances (GD&T). * Plan and expedites orders for stock and verifies receipt. * Set up machine, including zero and reference points; setting tool registers, offsets, cutter compensation; calculating requirements, including basic math, geometry, and trigonometry; proving part program. Make proper installations and adjustments. * Measure positions with first-run part, and sampling of work pieces; adhering to international standards. * Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions. * Troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. * Perform preventive maintenance requirements - follows manufacturer's instructions; troubleshoots malfunctions. * Maintain continuity among work shifts by documenting and communicating actions, irregularities, and needs in designated production and quality logs. * Follow engineering planning, and accurately fill out and complete work orders. * Support company Foreign Object Damage (FOD) Prevention Program. * Successfully completes training as required to maintain efficiency on the job. * Compliance with good housekeeping, quality, FOD, and safety procedures. * Support other Aurora Flight Sciences sites as required. * Performs other tasks as required by site leadership. Minimum Requirements * Education/experience typically acquired through basic education (e.g. high school diploma/GED). * Proficient in the use of computers and equipment utilizing computer technology in the fabrication of aircraft parts. * Be teachable and open minded. * Highly motivated. * Willing to learn and share knowledge. * Attention to Detail. * Exercise good judgement. * Knowledge of geometric tolerances is required. * Must be a US Person. Preferred Requirements * Related experience or an equivalent combination of education and experience (i.e., apprenticeship or trade school). * Ability to program machine, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part program. Make proper installations and adjustments. * Manual machining training / experience. * Ability to interpret complex engineering drawings, which utilize ASME, Y 14.5 M. * Conceptual skills; Process Improvement. * Experienced in FAA manufacture and associated paperwork. * Controls and Instrumentation. * Supply Management; Inventory Control. * Tooling; Coordination. Physical Requirements * Ability to work in a manufacturing environment and wear proper PPE. * Lift and transport objects up to 35 pounds; consistently stand, stoop, crawl, bend, crouch, climb, and kneel. * Work onsite in Manassas, VA. Salary Range (Annualized USD) * Minimum Range: $40,000.00 to $72,000.00 * Maximum Range: $48,000.00 to $85,000.00

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

We are seeking skilled Machinists capable of running manual and CNC lathes and mills to join a team of high-performing scientists, engineers, and technicians at our facility in Sterling, VA. **Responsibilities** + Set up, operate, and monitor CNC machines, including mills, lathes, and grinders, to produce parts and products. + Interpret technical drawings, blueprints, and work orders to determine machining operations and dimensions. + Load and edit CNC programs as required to ensure the production of parts to specifications, troubleshoot and optimize programs for efficiency. + Choose and install appropriate tools, fixtures, and gauges for machining processes. + Verify the conformity and quality of finished parts. + Perform inspections using precision measuring instruments such as calipers, micrometers, and CMMs to ensure parts meet strict quality standards. + Identify opportunities for process improvements, including optimizing machining time, tool life, and part quality. + Operate manual mills and lathes. + Perform regular machine maintenance and cleaning. + Other duties as assigned. **Essential Skills** + Experience with CNC machines, CNC lathes, and CNC equipment. + Proficiency in tool setup and reading and interpreting technical drawings. + 2+ years of related experience in machining. + Experience with CNC and manual lathe and mill operations. + Ability to interpret drawings according to ASME Y14.5-2009 standards. + Capability to inspect parts for dimensional compliance and machining quality. **Work Environment** This role requires working in a machine shop environment, often exposed to loud noises, moving machinery, and potential hazards. Appropriate personal protective equipment (PPE) will be provided. The position may require working in shifts depending on production schedules. Candidates must have the ability to lift and maneuver up to 50 lbs. and perform repetitive movements. The role also requires the ability to operate multiple machines at one time. **Job Type & Location** This is a Permanent position based out of Dulles, VA. **Pay and Benefits** The pay range for this position is $60000.00 - $85000.00/yr. Benefits information provided if an offer is made **Workplace Type** This is a fully onsite position in Dulles,VA. **Application Deadline** This position is anticipated to close on Dec 23, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job DescriptionSalary: $29.50-42.00 Internal Code: CNC5 Reports to: Operations Manager MATSYS, Inc. is seeking a CNC Machinist to join its team of high-performing scientists, engineers, and technicians at its Sterling, VA facility. The CNC Machinist is responsible for setting up and operating CNC machines to produce high-quality precision components according to engineering drawings and specifications. This role requires hands-on machining expertise, strong attention to detail, and the ability to maintain tooling, equipment, and process documentation to meet tight tolerances, deadlines, and customer requirements, often in support of defense projects. If you are looking to join a rapidly growing company that offers a dynamic, fast-paced, solution-driven work environment, MATSYS is the place for you! This position is expected to be primarily assigned to our research and development facility (6 am-2:30 pm, Monday Friday), but the candidate should be flexible and willing to cross-train in our production environment (6 am-4:30 pm, Monday Thursday), as well. The successful candidate will be hired as a Machinist II or III based on experience and skillset. Description Set up and and operate CNC mills and lathes to produce precision parts Interpret engineering blueprints, technical drawings, and work orders to ensure parts meet tolerances and quality standards Perform machine offsets, tool changes, and adjustments as necessary Inspect parts using calipers, micrometers, and gauges Troubleshoot machining programs and processes Maintain machine tools, cutting equipment, and workstations in a clean and safe condition Complete documentation such as job travelers, inspection reports, and nonconformance records Collaborate with engineers and others to improve machining processes and implement lean manufacturing practices Follow all company compliance requirements Other duties as assigned Required Must be a U.S. citizen due to government contract requirements High School diploma or equivalent 3+ years of experience operating CNC machines in a precision (metal part) manufacturing environment (aerospace or defense experience desirable) Proficiency with precision measuring instruments (micrometers, calipers, height gauges, bore gauges, etc.) Ability to read and interpret GD&T (Geometric Dimensioning & Tolerancing) Basic program editing experience Ability to follow standard operating procedures (SOPs) and safety guidelines Working Conditions: Standing, walking, lifting/maneuvering up to 50 lbs. Frequent exposure to powders, dust, lubricants, and manufacturing equipment Use of PPE such as gloves, masks, safety shoes, and protective eyewear. Preferred 2-year degree, technical certification, apprenticeship or equivalent Experience with 5-axis mills Experience operating wire EDM machines Experience programming with CAD/CAM software (MasterCam preferred) Familiarity with ISO 9001 quality systems Competencies Work Execution & Excellence: efficient planning & quality execution, ability to meet deliverables & deadlines, drive towards excellence Communication & Team Impact: effective & quality communication ability, ability to effectively share technical information, as well as accountability and a team player commitment Technical Expertise & Development: continual learning and commitment to cross-training, strong hands-on mechanical skills Autonomy, Judgment & Decision-Making: Sound judgment and planning ability, risk assessment skills, creativity & critical problem-solving Commitment to MATSYS core values and ideals: Safety: Safety is at the forefront of our decision-making. We hold each other responsible to ensure the health and safety of our team at all times. Quality: We stake our reputation on our impeccable standards. We provide the utmost quality in everything that we do and deliver above expectations, both as individuals and as a team. Integrity: We are accountable, transparent, and act with respect and in the best interests of our customers, communities, and employees. Teamwork: Good ideas come from everyone and great ideas come from us working together. Impact: We are responsive and effect positive and ground-breaking change, delivering excellence every step of the way. About MATSYS Inc. As a frontrunner in next-generation materials and manufacturing processes, MATSYS excels in developing advanced materials and manufacturing processes, setting itself apart through innovation and problem-solving. With a culture built on collaboration, transparency, and excellence, we prioritize client satisfaction through open communication and integrity, fostering enduring partnerships. Our teams diverse skills in material development, powder processing, and design fabrication enable us to deliver comprehensive solutions to complex problems. Our future vision includes expanding production capabilities, establishing strategic integrations with industry leaders, and driving continuous innovation and growth. MATSYS prides itself on its dynamic team, its ability to push boundaries and the commitment of its employees to excellence, innovation and teamwork. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (male or female), national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by applicable law. Employment decisions are based solely on merit, qualifications, and business needsnever on protected characteristics. MATSYS uses E-Verify to verify right-to-work. MATSYS is a Drug-Free Workplace. Candidates are required to pass a pre-employment background investigation and drug test prior following receipt of a conditional job offer.

Job DescriptionSalary: Filamatic is an OEM of industrial liquid filling and packaging machinery and has a great opportunity for a CNC Machinist to join our organization. In this role you will support the team by manufacturing parts and tooling on a variety of industrial machines using blueprints, sketches and or verbal direction to make sure our production team has the needed parts to build the machinery within the target deadlines and specifications. In addition, you will be working closely with our sales team to fulfill our continual orders of spare parts for our customers. As a CNC Machinist you will follow standard departmental procedures to manufacture various parts and assemblies for machines according to specifications - ensuring work orders are completed on time and meeting our high-quality standards. As a Machinist you must be able to read and work from blueprints as well as set up and operate a variety of CNC Machinery including mills and lathes. You should also be able to work with CAD/CAM programming systems. Responsibilities Set up and operate various equipment and CNC machinery including lathes, milling machines, grinder, and more to minimize downtime and errors in parts production. Manufacture parts on various machines from blueprints, sketches, and verbal instructions to meet/expedite delivery and ensure quality production. Design fixtures, tooling, and parts to meet machining requirements. Measure and examine completed parts to ensure it meets specifications using precision measuring instruments. Ability to work with CAD/CAM programming systems. Work schedule: First Shift Monday Friday 40 hours per week. We have some flexibility in start time; we want consistency in the schedule though. Typically starting between 6:00 am and 8:00 am and then working an 8.5-hour schedule to accommodate for a 30-minute lunch. Qualifications Ability to read drawings, schematics, sketches and understand oral instructions. Good understanding of all machine shop principles. Thorough knowledge of cutting tools such as end mills, boring bars, drills, taps, slitting saws, and turning tools / inserts. Ability to edit and troubleshoot programs using G-code. Ability to set up and operate CNC lathes and CNC machining centers. Proficient in use of precision measuring tools such as calipers, micrometers, scales, indicators, etc. Sound basic math skills including algebra, geometry, and trigonometry. Ability to interpret technician drawings and geometric drawings. Ability to set up and operate a full range of machines and equipment in accordance with safety protocols. Ability to measure (where and how) using proper tools. Proficiency in use of CAD/CAM software. High school diploma or equivalent required. Physical Requirements Job requires standing, working with hands and lifting up to 50 pounds 25% of the time; walking, sitting, talking/hearing, climbing/balancing, stooping, kneeling, crouching or crawling; reaching with hands or arms. Environmental Conditions Job works near/with moving mechanical parts and machine shop equipment more than 75% of the time; sharp edges/parts and emission of liquid approximately 50% of the time. Noise level is for a typical of machine shops. Compensation and Benefits Salary Range: $25.00 - $33.00 per hour Benefits: Excellent benefits package that allows you to accrue 2 weeks of annual vacation, 10 paid holidays, 401K, Parental Leave, Medical (3 different plan options), Dental, Vision, among some of our benefit offerings. Eligibility for insurance and 401K is the first of the month following 30 days of employment. About Us Filamatic, a division of National Instrument, LLC, is a leading manufacturer of industrial packaging machinery for the Pharmaceutical, Biotech, Diagnostic and Cannabis Industries. Our success over the last 70 years is attributable to exceeding customer expectations by providing products and services which offer a superior value proposition, creating a great working environment for our employees, hiring exceptionally qualified staff, and driving continuous process improvement. Our Values represent the lens we use when making decisions that impact the company, employees, and our customers. Each person we add to our organization should reinforce these values. We seek out individuals who support/embrace these values. Filamatic core values are: Adherence to the Golden Rule, Continuous Improvement, Customer Centric, Takes Ownership, Persistence, Courage to be Curious, Resilient Mindset, and Practical Excellence. To learn more about the exciting work of Filamatic, please visit our website at******************** check out our capabilities on our YouTube video:***************************** Employment opportunities are contingent on successfully completing a background check, drug test and physical as applicable based on the position. Equal Opportunity Employer National Instrument dba Filamatic is an equal opportunity employer. National Instrument dba Filamatic does not discriminate in employment with regard to actual or perceived race, color, creed, religion, national origin, citizenship status, ancestry, age, sex or gender(including pregnancy, childbirth, related medical conditions and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service or veteran status, disability, protected medical condition as defined by applicable state or local law, genetic information or any other characteristic protected by applicable federal, state or local laws and ordinances.

Job description: Company Description: Our long term client is a growing manufacturing company specializing in precision machining and fabrication. They are currently seeking an experienced CNC Machinist (Mills & Lathes) to join their team. If you are a skilled professional with a strong background in CNC machining, blueprint reading, and setup operations, we want to hear from you! Position Overview: As a CNC Machinist (Mills & Lathes), you will play a crucial role in producing high-quality machined components for a variety of industries such as the aerospace, automotive and medical device industries that require tight tolerance machining. You will be responsible for setting up, and operating CNC machines (Mills & Lathes), interpreting blueprints, adjusting tooling, making offsets, and using precision measurement tools to ensure the accuracy of the final products. Your expertise will contribute to the success of their operations. Key Responsibilities: Set up, operate, and (edit when needed) Fanuc controlled - CNC Mills & Lathes (machining OR turning) in accordance with production specifications. 2 to 4 axis machines. (5 axis mills experience definite plus!) Read and interpret blueprints and engineering drawings to ensure the accurate machining of components. Upload programs and make necessary adjustments (G&M code edits) to machine parameters. Select and install appropriate tooling and make tooling offsets as needed. Perform routine maintenance and troubleshooting on CNC machines. Conduct First Article Inspection (FAI) using tools such as: Vernier calipers, Dial calipers, Digital calipers, Micrometers, Bore micrometers, Depth micrometers, Optical Comparators, to measure and inspect parts to meet precise specifications. Monitor and maintain quality control throughout the machining process. Maintain a clean and organized workspace. Qualifications: Minimum of 5 years of CNC machining experience. Minimum 3yrs proficiency in setting up and operating CNC machines. Strong blueprint reading skills. Ability to read and understand G & M codes - Fanuc control. Knowledge of tool selection, tooling setup, and making tool offsets. Proficiency in using metrology tools (operating a CMM experience is a plus!) Strong attention to detail and commitment to producing high-quality work. Strong problem-solving skills and the ability to troubleshoot machine issues. Good communication skills and the ability to work effectively in a team. Willingness to work with a safety-first mindset. Hours/Shifts: 1st Shift Mon-Fri. 7:00am to 3:30pm Overtime available Benefits: Health Insurance - Single or Family 401k with Company Match Holiday Bonuses Performance bonuses Possible tuition reimbursement Salary Range: $25hr-$37hr (OR) $52-80K DOE

In this role you will operate, clean, and maintain various machining equipment including lathes, mills, 3\-axis machines, 5\-axis machines and other equipment to make precise parts, ensure efficient operations, and achieve high utilization. At ADDMAN, you'll be part of a skilled and growing team serving the defense, space and commercial aerospace industries. This position is for B shift hours are 3pm\- 11pm. ESSENTIAL JOB FUNCTIONS: Always has safety first in mind when working at ADDMAN, uses all personal protective equipment as required. Ensures all equipment and forklifts are functioning per design and function. Shuts down equipment and stops operations in unsafe conditions, lockout\/tagout when necessary. Utilizes work instructions, set\-up sheets and method documents to correctly operate machines and inspect machined parts. Reads and interprets all drawings, including geometric dimensioning and tolerancing. Accurately reads and records information (i. e. material manufacture date, number of parts produced, and other criteria) that is critical to the production process. Follows instruction from a traveler\/router and machining procedures to perform the machining process. Operates various equipment and makes various parts to precise specifications utilizing knowledge of metal properties, set ups, layouts, and precision machining procedures. Ability to read and understand sketches, blueprints and thorough understanding of tools and proper use of fixtures. May set up, or learn to set up, and run CNC or manual machinery. Adjust controls to vary the depth of cut, RPM and rate of feed efficiently. Updates inventory systems for usage and scrap and prepares Material Tags for non\-conforming parts. Capable of following detailed manufacturing processes to produce high\-tolerance parts. Adheres to the AS9100 and ISO 9000 standards and complies with internal Quality Management System (QMS) standards. Utilizes various gauging equipment to ensure conformance to the engineering specifications and standards through the production run i.e. calipers, micrometers, gage pins height gages, dial indicators and precision scales. Maintains an accurate count and record production pieces and hours of production. Performs housekeeping and cleanup duties upon completion of assigned tasks. Actively participates in housekeeping and 5S efforts by maintaining an orderly, clean, and safe work area. Keeps equipment and product free of FOD, Foreign Object Debris. Promotes teamwork within the organization. Follows all Company Human Resources policies and process procedures. Performs other duties as assigned. Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. Requirements Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self\-motivated and able to complete tasks with minimal supervision Ability to work on cross\-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: Previous experience in machining and with quality processes is desired Some exposure and experience with manufacturing \/CNC machining processes Understand continuous improvement or lean \/ six sigma principles Graduate of related two\-year vocational school program and three years related work experience and\/or training; or equivalent combination of education and experience Eligible to work in the United States without company sponsorship WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. Ability and comfortability to work in small confine spaces while following proper safety protocol. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all\-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at\-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at\-will status of the employee. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"667294733","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Glen Burnie"},{"field Label":"State\/Province","uitype":1,"value":"Maryland"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"21060"},{"field Label":"Salary","uitype":1,"value":"23.00"}],"header Name":"CNC Machinist II\-B Shift","widget Id":"4**********0072311","awli IntegId":"urn:li:organization:18758749","is JobBoard":"false","user Id":"4**********1692017","attach Arr":[],"awli ApiKey":"86ezhi1yg2oktx","custom Template":"3","awli HashKey":"c21b16e3c8dbe9654eb55b1f04069e03d572626405c07f472ea90a39cdba9a8**********8097028c357acddf7e325374edf16ca 4013eb8708eaa9f0dbef6a35","is CandidateLoginEnabled":true,"job Id":"4**********5078885","FontSize":"12","google IndexUrl":"https:\/\/lucasjamestalent.zohorecruit.com\/recruit\/ViewJob.na?digest=Nyi9VFWIsbMXNaN0qju4ExnqFgCWB6snf.Rr8WJbtro\-&embedsource=Google","location":"Glen Burnie","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"pcy573a2da6bcad414975813a806bd9435355"}

Responsibilities: 1. Program software to run CNC Machine. 2. Set-up and Machine Aluminum Housings and Covers for day and night runs. 3. Clean and deburr all finished parts. 4. Inspect finished parts for dimensional tolerances to drawing specifications. 5. Maintain CNC Machine at all times. 6. Operate Manual Drill Press, Band saw, and Grinder as required. 7. Painting of Finished Hardware using Military Grade Epoxy Paint 8. Maintenance of CNC Equipment, Manual Machines and Tools 9. Keep Machine Shop clean at all times. Qualifications: 1. Must have proficient Desktop Computer skills. 2. Able to read & understand Mechanical Drawings, Dimensions and Tolerances. 3. Understanding of Feed Rates for End Mills and Drills. 4. Detail oriented and can work with minimal supervision. 5. Multitasker (able to keep several processes running at once). 6. Experience using CNC Milling and G-Code preferred (willing to train). 7. Experience programming HAAS CNC using GibbsCAM preferred (willing to train). 8. Experience in AutoCAD preferred. 9. Experience in SolidWorks a plus. Education: High School Diploma, College Preferred Experience: 1 - 3 years Job Type: Full Time

SUMMARY: A CNC Machinist is responsible for operating one or more types of computer numeric controlled production equipment. Selects appropriate settings and makes adjustments as necessary. Commitment to and support of the Company Core Values are key to success in this position. ESSENTIAL DUTIES AND RESPONSIBILITIES: Verify that material and paperwork for the job being performed is correct Plan machining in accordance with all blueprints and hard copy and electronic technical data and specifications, applying geometric dimensioning and tolerances as required Set-up mills by adjusting all necessary fixturing and machine attachments; setting and applying tool and machine reference points and offsets and calculating requirements using basic math, geometry, and trigonometry Check stock and load and unload the machine Create an in-process inspection report for each operation, as necessary, if one does not exist Identify non-conformance, if discovered, notify your supervisor so that it can be documented identified, dispositioned, and segregated from the remainder of the lot Verify that there are no chips on either the jaws/fixture or on the part/material to be machined. Load the part/material, verify that the part is properly seated in the fixture/jaws, snug against any stop pins prior to clamping or tightening of the jaws Identify discrepant material left in your work area, notify your supervisor so that it can be dispositioned and segregated. Follow all quality procedures, work instructions, and documents pertaining to your job and department. Identify any problems/issues while running an operation, notify the supervisor immediately Responsible for keeping the machine and the immediate area clean Monitor coolant levels Clean the chips from machine at the end of shift, or when the job is finished Verify that all company and personal inspection equipment and tools being used are in calibration. Adhere to all company safety policies including the use of eye and ear protection. Perform all functions of the job while adhering to established quality policies and procedures Uphold the company core values Other duties as assigned SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities may require the following: Must be able to operate the various machines within the department with minimal instruction. Must be capable of reading drawings and be able to inspect the parts they are machining. Must be capable of working with minimal supervision. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or 2 years experience; or equivalent combination of education and experience.0 LANGUAGE SKILLS: Ability to speak and understand basic safety and manufacturing instructions. MATHEMATICAL SKILLS: Ability to add and subtract two-digit numbers. Ability to multiply and divide with 10's and 100's. REASONING ABILITY Prioritize activities and work under pressures at all times. Comply with safety standard procedures Be able to differentiate between a symptom and a root of the problem Open to change and improvements Maintain clean and organized workspace CERTIFICATES, LICENSES, REGISTRATIONS: Authorization to work in the United States. To conform to U.S. export control regulations, you should be eligible for any required authorizations from the U.S. Government. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and hear. The employee frequently is required to use hands and fingers; handle, feel, and reach with hands and arms. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and smell. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly exposed to moving mechanical parts. The employee may be exposed to hot and/or cold work environment, chemicals, fumes or airborne particles, loud noises, risk of electrical shock and vibration low and high temperatures and/or other occupational hazards; personal protective equipment may be required. NOTE: This identifies the general nature and scope of work to be performed. Vitesse Systems, LLC. reserves the right to revise all or any part of this and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the job duty, except as required by Vitesse Systems, LLC. This job description is subject to change based on the needs of the position and/or the Company. Vitesse Systems, LLC performs work controlled by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). These statutes require the protection of technical data and products. The regulations require that such data not be disclosed in written, oral, or visual form to any foreign national without prior export authorization from the Department of State. A foreign national is defined by the U.S. Government under EAR 734.2(b)(2)(ii) and 8 USC 110 (a)(20) as one who: Is not a United States citizen Is not lawfully admitted for permanent residence in the U.S. Does not have politically protected status (embassy, refugee, or asylum) Has dual U.S. / foreign citizenship Vitesse Systems, LLC. is an Equal Employment Opportunity / Affirmative Action (EEO/AA) Veterans / Disabled Employer

Set-up and run CNC and manual machines per established standards, methods, and programs to meet customer expectations, quality standards, and on time delivery requirements. A CNC Mill Machinist will be scheduled 6 AM - 4:30 PM 4 days a week. * Generous Time Off: Annually 9 paid holidays/80 hours of Paid time off, up to 40 hours of paid sick leave each year. * Comprehensive Benefits: Cigna medical, dental, and vision plans for you and your family. * Retirement Savings: 401(k) plan with up to 4% company match. * Health and Financial Wellness: gym discounts and financial planning and preparation guidance from trusted advisors * Norton Lifelock: free employee or family coverage * Life and AD&D Coverage: Free Life Insurance/AD&D for Employees plus additional voluntary life and accidental death & dismemberment insurance for you and your family. * Employee Assistance Program: Access to free behavioral health services, including counseling and other resources. * Growth Opportunities: Ongoing training and tuition assistance to help you advance your career. * Ancillary benefits including Flexible Spending Account, short term disability and long-term disability Requirements Essential Functions * Set-up Haas CNC machine to run production order using defined tools and fixtures, verification of program, and documentation review (drawings, job packet, router, etc.) * Run machine to complete production order within the required standard times * Measure and inspect completed parts to customer requirements and department standards * Prepare finished product for next production operation or shipment as needed including washing, wrapping, packaging, etc. * Comply with all health and safety requirements based on each operation * Complete all required production paperwork in a timely and accurate manner. This includes using a scanner and computer to log time and completed parts * Participate in and support improvement projects within production environment * Assist in other cells as required, i.e., assembly, surface treatment, etc. * Maintain tooling area in appropriate manner * Maintain a clean working area Educational Requirements * Ability to pass Phoenix Mecano's knowledge assessments including reading, writing, and basic math Phoenix Mecano provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

SUMMARY: A CNC Machinist is responsible for operating one or more types of computer numeric controlled production equipment. Selects appropriate settings and makes adjustments as necessary. Commitment to and support of the Company Core Values are key to success in this position. ESSENTIAL DUTIES AND RESPONSIBILITIES: Verify that material and paperwork for the job being performed is correct Plan machining in accordance with all blueprints and hard copy and electronic technical data and specifications, applying geometric dimensioning and tolerances as required Set-up mills by adjusting all necessary fixturing and machine attachments; setting and applying tool and machine reference points and offsets and calculating requirements using basic math, geometry, and trigonometry Check stock and load and unload the machine Create an in-process inspection report for each operation, as necessary, if one does not exist Identify non-conformance, if discovered, notify your supervisor so that it can be documented identified, dispositioned, and segregated from the remainder of the lot Verify that there are no chips on either the jaws/fixture or on the part/material to be machined. Load the part/material, verify that the part is properly seated in the fixture/jaws, snug against any stop pins prior to clamping or tightening of the jaws Identify discrepant material left in your work area, notify your supervisor so that it can be dispositioned and segregated. Follow all quality procedures, work instructions, and documents pertaining to your job and department. Identify any problems/issues while running an operation, notify the supervisor immediately Responsible for keeping the machine and the immediate area clean Monitor coolant levels Clean the chips from machine at the end of shift, or when the job is finished Verify that all company and personal inspection equipment and tools being used are in calibration. Adhere to all company safety policies including the use of eye and ear protection. Perform all functions of the job while adhering to established quality policies and procedures Uphold the company core values Other duties as assigned SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities may require the following: Must be able to operate the various machines within the department with minimal instruction. Must be capable of reading drawings and be able to inspect the parts they are machining. Must be capable of working with minimal supervision. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or 2 years experience; or equivalent combination of education and experience.0 LANGUAGE SKILLS: Ability to speak and understand basic safety and manufacturing instructions. MATHEMATICAL SKILLS: Ability to add and subtract two-digit numbers. Ability to multiply and divide with 10's and 100's. REASONING ABILITY Prioritize activities and work under pressures at all times. Comply with safety standard procedures Be able to differentiate between a symptom and a root of the problem Open to change and improvements Maintain clean and organized workspace CERTIFICATES, LICENSES, REGISTRATIONS: Authorization to work in the United States. To conform to U.S. export control regulations, you should be eligible for any required authorizations from the U.S. Government. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and hear. The employee frequently is required to use hands and fingers; handle, feel, and reach with hands and arms. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and smell. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly exposed to moving mechanical parts. The employee may be exposed to hot and/or cold work environment, chemicals, fumes or airborne particles, loud noises, risk of electrical shock and vibration low and high temperatures and/or other occupational hazards; personal protective equipment may be required. NOTE: This identifies the general nature and scope of work to be performed. Vitesse Systems, LLC. reserves the right to revise all or any part of this and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the job duty, except as required by Vitesse Systems, LLC. This job description is subject to change based on the needs of the position and/or the Company. Vitesse Systems, LLC performs work controlled by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). These statutes require the protection of technical data and products. The regulations require that such data not be disclosed in written, oral, or visual form to any foreign national without prior export authorization from the Department of State. A foreign national is defined by the U.S. Government under EAR 734.2(b)(2)(ii) and 8 USC 110 (a)(20) as one who: Is not a United States citizen Is not lawfully admitted for permanent residence in the U.S. Does not have politically protected status (embassy, refugee, or asylum) Has dual U.S. / foreign citizenship Vitesse Systems, LLC. is an Equal Employment Opportunity / Affirmative Action (EEO/AA) Veterans / Disabled Employer

Job DescriptionBenefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance Job Title: CNC Operator Location: King of Prussia, PA (On-Site, Full-Time) Responsibilities: Operate CNC fabrication machinery for cutting and finishing custom stone countertops and surfaces. Read shop drawings, templates, and layout specifications. Use hand tools and fabrication equipment with accuracy. Handle, stage, and move stone materials. Maintain high standards of quality and precision. Qualifications: CNC machine operation experience. Hand tool and saw operation skills. Forklift operation experience is a plus. Strong problem-solving skills and attention to detail. Prior experience in stone fabrication or construction preferred. Experience: 2 10 years Other Benefits: Overtime opportunities. Growth and advancement potential. Supportive, team-oriented environment. Stable workload with an established brand. This is a remote position.

Now Hiring CNC Machine Operators - All Shifts Available (1st, 2nd & 3rd) | $1,000 Hiring Bonus! Are you ready to launch or grow your career in manufacturing? We're hiring CNC Machine Operators for all shifts and offering a $1,000 hiring bonus! Experience is preferred, but we're happy to train motivated candidates. Join a forward-thinking manufacturing team focused on quality, precision, and innovation. We offer career advancement opportunities, comprehensive benefits, and a supportive environment where your work truly matters. What You'll Do: Operate CNC machining and turning centers to produce precision components. Read and interpret part drawings and specifications. Perform inspections using micrometers, calipers, gauges, and other measuring tools. Maintain tolerances within +/- .05mm through offsets and minor tool changes. Load, inspect, assemble, and package parts per documented instructions and quality standards. Accurately complete production and inspection documentation. Support cross-training initiatives on various machines as needed. Follow all safety and quality procedures, and maintain a clean work area. What We Offer: $1,000 hiring bonus Weekly pay and competitive wages Shift premiums for 2nd and 3rd shifts 8-hour shifts with paid breaks Medical, dental, and vision insurance Health Savings Account (HSA) option Life insurance and short-term disability Paid vacation and holidays 401(k) with company match What We're Looking For: 6+ months of CNC machine operation experience (preferred) Familiarity with Fanuc controls on machines such as Mori Seiki, Okuma, or Hardinge Ability to lift heavy objects frequently and stand for an 8-hour shift Strong attention to detail and quality standards Dependability, self-motivation, and a collaborative attitude Good attendance and safety record Production Lead candidates should also have a 1-year technical certificate and experience in training and troubleshooting.

Who YOU are and what YOU can become: A machine operator must have excellent attention to detail and possess a working knowledge of tool set-up and CNC controls. This position requires continuity between all shifts, support staff and supervisor. This role must be able to document machine and tool conditions with clear communication. In addition, this position is responsible for setting up, operating and overseeing our computer numerical controlled (CNC) machines. Ability to adhere to safety procedures and regulations while driving to meet quality requirements. Who WE are and where WE are going: At MRA Systems, our employees have amazing opportunities to work on advanced technologies and systems that support thousands of customers and millions of people worldwide every day. From the first flight across the Pacific Ocean to developing highly complex structures for the most popular aircraft in the world, we have come a long way always with a can-do approach to problem solving while delighting customers with our high say-do ratio. We are looking for people with innovative ideas and the drive to help us grow into the future. A pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none. At ST Engineering MRAS, we are also rapidly augmenting our maintenance, repair and overhaul (MRO) capabilities leveraging the company's expanded aircraft nacelle portfolio as well as it's materials and processing expertise. What YOU will do: This role works from MFG process plans, manuscripts, NC set up documents, tool orders, drawings, sketches, holding fixture location diagrams and similar information. Reads and evaluates information to ensure that latest revisions have been incorporated. Ability to access files from a windows-based computer to obtain correct working instructions. Reads the NC set up documents and loads the required Fixtures, cutting tools and Cutting tool holders in order to process the job being set up on the machine. Sets up machine, loads and presets cutting tools to the proper torque values. Assures that the machine is functioning up to standards shown during initial training. Prior to loading Fixtures or parts, operator will conduct visuals and take necessary steps to safely clean the critical interface areas. This role must be able to follow direction for setting machine local coordinate systems on the current fixture. Assures machine has the correct fixture offset, tooling and NC programs before safely proceeding with the defined process. Checks initial work piece for conformance to dimensions and specifications before proceeding with multiple production parts. Makes subsequent runs to complete the job, periodically checking parts for conformance to dimensions and specifications. Provide feedback to next shift, support staff, and supervision as it relates to machine condition, process status, tool life for perishable tooling, and fixture condition. A Machinist P1 is also responsible for documenting actions by completing production and quality logs. Clear communication is a must in that the Operator must be able to interpret XYZ axis movements and safely jog a machine utilizing the pendant or control while avoiding collisions with fixtures and parts. This role, machinist, one must be able to understand the basics of G and M codes. Maintains equipment by monitoring preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; Alerting team when repairs may be needed. Maintains assigned work area in a clean, safe and orderly condition. Utilizes boom crane, and/or variety of hand operated battery powered skid lifts: forklifts tow motors, hand trucks, dollies, "A" frames, etc. Must be able to set and operate, including, but not limited to: Large 5 axis Gantry Milling machines, multi-axis - multi spindle drilling machines. Tool Pre-set machines for run-out, length and diameter. Perform all work on machines with help of hoist and cranes as required. Ability to safely walk onto machine tables to secure parts and fixtures. What YOU must bring to Succeed: * HS Diploma / GED equivalent * Minimum of 3-4 years of relevant experience and or a trade school certificate with 2 year in a CNC Machine Operator Role. * Requires a working knowledge of methods and techniques used in machine operations and in setting up and operating NC machines. * Requires a working understanding and introductory use of the following elements of Machine Shop: o Machine shop math for setting fixture offsets and calculating tolerances o Ability to read sketches, drawings and specifications o Familiar with precision measuring instruments such as Calipers height gauge; vernier calipers, inside, outside and depth micrometers; dial indicator, etc. Additional Preferred Qualifications: * Able to physically be mobile to walk, stand and function on machine tables and stairs on a consistent basis. * Effectively utilize communication tools such as email, radio, or company messenger to communicate issues, concerns, or any other information needed to complete any and all jobs. * Ability to physically work in shop working conditions, such as exposure to dirt, fumes, excessive cold, excessive heat, and noise. * Ability to obtain and maintain Crane/Hoist Certification. * Knowledge of multi axis machine movement * Ability to run manual milling and turning equipment * Understanding of tolerances and GD&T dimensions. * Train and guide less experienced employees on operation of CNC controllers, Manufacturing process and machine(s) At ST Engineering MRAS, we offer great rewards, competitive pay, career advancement and growth opportunities. Salary for this role: $25.00 per hour. ST Engineering considers several factors with extending job offers, including but not limited to candidates' key skills, relevant work experience, education/training/certification, job level, and work location. Base salary is only one component of our competitive Total Rewards package. ST Engineering MRAS offers these incentives for hourly roles: * Competitive Healthcare Benefits Package * 401k Savings Plan * Annual Pay Increases and COLA pay * Shift Differential Pay for off shift schedules * Overtime Opportunities * Paid-Time Off/Vacation * Educational Assistance Reimbursement * Health & Safety Personal Protective Program * Free Onsite Gym with weekly fitness classes * On-the-Job Training Employment Notice: Background and Drug Screening Requirements As part of our commitment to maintaining a safe and secure workplace, successful completion of a background check and drug screening is a mandatory condition for employment. All offers of employment are contingent upon satisfactory results from these screenings. It takes diverse talent to solve real-world problems. ST Engineering is deeply committed to building a workplace community where inclusion is valued, and everyone feels welcomed. We're proud to consider all qualified applicants for employment without regard to race, color, religion, sex, pregnancy, family status, marital status, sexual orientation, national origin, disability, age, or veteran status, or any other legally protected grounds. So, bring us your personal experience, your perspectives, and your background. It's through our differences that innovative changes are made. ST Engineering is committed to providing reasonable accommodations to qualified individuals with disabilities in the employment application process. To request an accommodation, please contact our Talent Strategies team at ************, or by email at ***********************. Nearest Major Market: Baltimore Apply now "

In this role you will operate, clean, and maintain various machining equipment including lathes, mills, 3-axis machines, 5-axis machines and other equipment to make precise parts, ensure efficient operations, and achieve high utilization. At ADDMAN, you'll be part of a skilled and growing team serving the defense, space and commercial aerospace industries. This position is for B shift hours are 3pm- 11pm. ESSENTIAL JOB FUNCTIONS: Always has safety first in mind when working at ADDMAN, uses all personal protective equipment as required. Ensures all equipment and forklifts are functioning per design and function. Shuts down equipment and stops operations in unsafe conditions, lockout/tagout when necessary. Utilizes work instructions, set-up sheets and method documents to correctly operate machines and inspect machined parts. Reads and interprets all drawings, including geometric dimensioning and tolerancing. Accurately reads and records information (i. e. material manufacture date, number of parts produced, and other criteria) that is critical to the production process. Follows instruction from a traveler/router and machining procedures to perform the machining process. Operates various equipment and makes various parts to precise specifications utilizing knowledge of metal properties, set ups, layouts, and precision machining procedures. Ability to read and understand sketches, blueprints and thorough understanding of tools and proper use of fixtures. May set up, or learn to set up, and run CNC or manual machinery. Adjust controls to vary the depth of cut, RPM and rate of feed efficiently. Updates inventory systems for usage and scrap and prepares Material Tags for non-conforming parts. Capable of following detailed manufacturing processes to produce high-tolerance parts. Adheres to the AS9100 and ISO 9000 standards and complies with internal Quality Management System (QMS) standards. Utilizes various gauging equipment to ensure conformance to the engineering specifications and standards through the production run i.e. calipers, micrometers, gage pins height gages, dial indicators and precision scales. Maintains an accurate count and record production pieces and hours of production. Performs housekeeping and cleanup duties upon completion of assigned tasks. Actively participates in housekeeping and 5S efforts by maintaining an orderly, clean, and safe work area. Keeps equipment and product free of FOD, Foreign Object Debris. Promotes teamwork within the organization. Follows all Company Human Resources policies and process procedures. Performs other duties as assigned. Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. SKILL REQUIREMENTS: Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: Previous experience in machining and with quality processes is desired Some exposure and experience with manufacturing /CNC machining processes Understand continuous improvement or lean / six sigma principles Graduate of related two-year vocational school program and three years related work experience and/or training; or equivalent combination of education and experience Eligible to work in the United States without company sponsorship WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. Ability and comfortability to work in small confine spaces while following proper safety protocol. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at-will status of the employee. Salary Description $23 -$28 / Per hour

Take the next steps to your professional success as Solerity is a recognized leader in providing Information Technology, Engineering Services, Program Management and Consulting Services to the U.S Federal Government and our Intel Community. We enable our clients to achieve their organizational initiatives by applying high quality, innovative and cost-effective professional services, and solutions. Solerity needs your support to help us provide these solutions and continue our path as a recognized leader in providing resources for federal agencies and the Intel Community! YOUR RESPONSIBILITIES: Description - Provide subject matter expertise; design proof-of-concepts; build prototypes; support experimentation Requirements Required Skills, and Abilities: Qualifications TS/SCI with Poly Cross-domain technical knowledge; agile prototyping; hardware/software integration BENEFITS YOU'LL ENJOY: 1. Medical, dental and vision coverage 2. Health Savings Accounts and Flexible Spending Accounts for healthcare and dependent care 3. Flexible work schedule to include onsite, hybrid or remote, as dictated by position 4. 401(k) and company-funded life insurance 5. Generous Paid Time Off (PTO) 6. Tuition and training assistance 7. Financial rewards for employee referrals. 8. Pet insurance 9. Employee discount program EMPLOYMENT OPPORTUNITIES: Solerity is committed to the range of perspectives we bring to the marketplace by being an employer dedicated to hiring a highly qualified team of professionals, providing world class services and products aimed at exceeding our customer's expectations. Solerity is an equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities. Solerity is a VEVRAA Federal Contractor. APPLY TODAY!

The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the “Best Value” supplier in the industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Interprets drawings to visualize final form of die, part or tool, and plans sequence of operations to achieve desired end result Works from prints, sketches, verbal or written instructions, or from existing part to be copied or fitted Lifts, positions, and secures parts to be machined on surface plate or worktable, using hoist, vises, v-blocks, or angle plates Sets up and operates machine tools such as CNC mills and lathes, manual mills and lathes, CNC and manual grinders, wire EDM, saw Plans the set up and operation of machine shop tools considering types of material, tolerances, types of cutting tools, coolants, lubricants, and machine tool feeds and speeds Programs mills and lathes using conversational programming and/or CAM by entering instructions including setting zero and reference points, tool registers, tool offsets, geometry of part, etc. Verifies dimensions, alignments, and clearances of finished parts, using measuring instruments such as CMM, calipers, micrometers, height gages, dial indicators, and gage blocks Fits and assembles jigs, fixtures, tools and dies, using wrenches, hammers, arbor or hydraulic presses Troubleshoots poor performing tools, identifying deficiencies and suggesting improvements Designs jigs, fixtures, or templates for use as work aides Inventories, requests, and investigates alternative cutting tools and shop supplies Promptly and accurately completes all required recordkeeping and inspections Performs routine machine maintenance as assigned Other tasks, projects and functions as assigned. Requirements: High school diploma or equivalent preferred; equivalent relevant experience may be considered Trade school or Apprenticeship program preferred Exhibits in-depth job knowledge and skills Adjusts machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is not optimum Develop CNC machining processes by selecting the chucking device, cutting tools, tool arrangement, and cutting speeds and feeds with emphasis on standardization Create and maintain CNC programs to produce parts using CAD/CAM software. Experience utilizing GibbsCAM, MasterCAM, Fusion 360, Edgecam, Partmaker, or Esprit is a plus Thorough understanding of workholding, datums, sequence of operations, tool selection Can prioritize the work and coordinate with others Capable of fostering a team environment Self-motivated and can work with little supervision Thinks, plans, and responds quickly to unexpected events Able to multi-task in a fast-paced environment with changing priorities Active participant in troubleshooting and problem solving Capable of running multiple machines while they are in automatic cycles Basic Windows operating system navigation, Basic Microsoft Office Suite, CAM software experience preferred Math skills up to basic trigonometry (addition, subtraction, multiplication, division, finding an angle or tangent) Mechanical aptitude to understand how processes operate Technical skills and experience to solve complex problems and troubleshoot Analytical and critical thinking skills to foresee issues with designs or processes and come up with alternate solutions Attention to detail to ensure the highest level of precision in finished work Time management and having a sense of urgency for the jobs at hand Ability to work with others in a fast-paced manufacturing setting Learn more about U.S. Tsubaki at: U.S. Tsubaki offers: A competitive compensation package, including health benefits effective on date of hire, generous 401(k) match and profit sharing, education reimbursement, and annual bonus potential Paid time off (“PTO”) 90-day and 180-day performance reviews Shift differential pay for 2nd and 3rd shift Weekly bonus potential Paid training Weekly pay Shift: 4 days a week, 10 hours per day. Days: Monday - Thursday (standard schedule). Overtime may be required on Fridays/Saturdays according to business needs. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI73310c8b6b78-30***********7

Filamatic is an OEM of industrial liquid filling and packaging machinery and has a great opportunity for a CNC Machinist to join our organization. In this role you will support the team by manufacturing parts and tooling on a variety of industrial machines using blueprints, sketches and or verbal direction to make sure our production team has the needed parts to build the machinery within the target deadlines and specifications. In addition, you will be working closely with our sales team to fulfill our continual orders of spare parts for our customers. As a CNC Machinist you will follow standard departmental procedures to manufacture various parts and assemblies for machines according to specifications - ensuring work orders are completed on time and meeting our high-quality standards. As a Machinist you must be able to read and work from blueprints as well as set up and operate a variety of CNC Machinery including mills and lathes. You should also be able to work with CAD/CAM programming systems. Responsibilities Set up and operate various equipment and CNC machinery including lathes, milling machines, grinder, and more to minimize downtime and errors in parts production. Manufacture parts on various machines from blueprints, sketches, and verbal instructions to meet/expedite delivery and ensure quality production. Design fixtures, tooling, and parts to meet machining requirements. Measure and examine completed parts to ensure it meets specifications using precision measuring instruments. Ability to work with CAD/CAM programming systems. Work schedule: First Shift Monday - Friday 40 hours per week. We have some flexibility in start time; we want consistency in the schedule though. Typically starting between 6:00 am and 8:00 am and then working an 8.5-hour schedule to accommodate for a 30-minute lunch. Qualifications Ability to read drawings, schematics, sketches and understand oral instructions. Good understanding of all machine shop principles. Thorough knowledge of cutting tools such as end mills, boring bars, drills, taps, slitting saws, and turning tools / inserts. Ability to edit and troubleshoot programs using G-code. Ability to set up and operate CNC lathes and CNC machining centers. Proficient in use of precision measuring tools such as calipers, micrometers, scales, indicators, etc. Sound basic math skills including algebra, geometry, and trigonometry. Ability to interpret technician drawings and geometric drawings. Ability to set up and operate a full range of machines and equipment in accordance with safety protocols. Ability to measure (where and how) using proper tools. Proficiency in use of CAD/CAM software. High school diploma or equivalent required. Physical Requirements Job requires standing, working with hands and lifting up to 50 pounds 25% of the time; walking, sitting, talking/hearing, climbing/balancing, stooping, kneeling, crouching or crawling; reaching with hands or arms. Environmental Conditions Job works near/with moving mechanical parts and machine shop equipment more than 75% of the time; sharp edges/parts and emission of liquid approximately 50% of the time. Noise level is for a typical of machine shops. Compensation and Benefits Salary Range: $25.00 - $33.00 per hour Benefits: Excellent benefits package that allows you to accrue 2 weeks of annual vacation, 10 paid holidays, 401K, Parental Leave, Medical (3 different plan options), Dental, Vision, among some of our benefit offerings. Eligibility for insurance and 401K is the first of the month following 30 days of employment. About Us Filamatic, a division of National Instrument, LLC, is a leading manufacturer of industrial packaging machinery for the Pharmaceutical, Biotech, Diagnostic and Cannabis Industries. Our success over the last 70 years is attributable to exceeding customer expectations by providing products and services which offer a superior value proposition, creating a great working environment for our employees, hiring exceptionally qualified staff, and driving continuous process improvement. Our Values represent the lens we use when making decisions that impact the company, employees, and our customers. Each person we add to our organization should reinforce these values. We seek out individuals who support/embrace these values. Filamatic core values are: Adherence to the Golden Rule, Continuous Improvement, Customer Centric, Takes Ownership, Persistence, Courage to be Curious, Resilient Mindset, and Practical Excellence. To learn more about the exciting work of Filamatic, please visit our website at ***************** and check out our capabilities on our YouTube video: ***************************** Employment opportunities are contingent on successfully completing a background check, drug test and physical as applicable based on the position. Equal Opportunity Employer National Instrument dba Filamatic is an equal opportunity employer. National Instrument dba Filamatic does not discriminate in employment with regard to actual or perceived race, color, creed, religion, national origin, citizenship status, ancestry, age, sex or gender(including pregnancy, childbirth, related medical conditions and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service or veteran status, disability, protected medical condition as defined by applicable state or local law, genetic information or any other characteristic protected by applicable federal, state or local laws and ordinances.

Job DescriptionJob Responsibilities Operate CNC mills and/or lathes to produce precision parts according to work instructions. Load and unload raw materials and finished parts from machines. Monitor machine operation and make minor adjustments as needed to maintain part quality. Perform basic measurements using calipers, micrometers, and other inspection tools to ensure parts meet specifications. Read and interpret blueprints and Geometric Dimensioning & Tolerancing (GD&T) to verify part accuracy. Fill out in-process inspection documentation to ensure quality standards are met. Maintain a clean and organized work area. Follow all safety protocols and company procedures. Assist with basic machine maintenance, such as cleaning and lubrication. Qualifications & Requirements Previous experience operating CNC machines preferred, but willing to train motivated candidates. Ability to read and understand blueprints and GD&T. Strong attention to detail and commitment to quality. Ability to accurately complete in-process inspection documentation. Proficiency in using precision measuring instruments. Ability to lift up to 40 lbs and stand for extended periods throughout the shift. Willingness to learn and work as part of a team in a fast-paced environment. This is a remote position.