Controls engineer jobs in Claremont, CA

Senior RF Engineer Orange County, CA Our exciting Space client are looking for an RF engineer to be responsible for the RF design for a remote sensing payload, this roles responsibility includes the concept of operations (CONOPS) for the payload on the bus given on orbit constraints such as power, attitude, thermal loads. Being responsible for all aspects include the ground processing. With support as needed from the SAR/DevOps team, they will be responsible for designing and developing the ground-based solution that would work with various ground systems. Success in this role requires someone with very detailed experience with both SAR theory as well as hands on design experience for both the hardware and software. They will need to be a self-starter with strong initiative to assist in planning out the direction, executing on the plan, then adjusting the plan when unknowns become knowns. Key Responsibilities: Analyze and optimize RF design for Synthetic Aperture Radar (SAR) payloads while collaborating with cross-functional teams to meet project specifications Lead the design of complex systems involving high-speed digitizers, low-noise RF circuits, FPGAs, and embedded processors Work closely with SAR Engineers to test and validate SAR payloads and data collections Conduct detailed RF analysis for antennas and antenna arrays Create RF subsystem requirements and derive engineering requirements to meet project goals Perform microwave analysis using Python or similar tools Generate documentation and effectively communicate technical information to audiences of varying technical ability Contribute technical writing to RFIs, RFPs, and other business capture activities Ideal Qualifications: Advanced degree in Electrical Engineering, Computer Engineering, or similar field 8+ years of experience in a similar engineering role (RF Engineering, Electrical Engineering) 4+ years of experience in a spacecraft engineering discipline 4+ years of experience in high-speed electronics and RF design Experience in anechoic testing with phased antenna arrays Expertise in RF test automation and data analysis Expertise in electromagnetics, RF, and antenna theory Familiarity with SAR imaging concepts and system design Mastery of signal processing fundamentals, including the manipulation of complex-valued data Preferred Qualifications: 4+ years of hands-on experience in SAR payload design and integration Experience with assembly, integration, and testing for spacecraft/payloads Experience with embedded programming (C/C++) and FPGA design tools (Verilog/VHDL) Background in software configuration management (SCM) and CI/CD pipelines Experience in Python or scripting languages for test automation Experience with formal verification and validation of space-rated systems Due to Import control requirements candidates will need to be Must be a US person with a current TS/SCI clearance or ability to pursue one.

We are working with a technology-focused company in Irvine that is looking to add an Electronic Design Engineer to their team. This role will focus on the design and development of custom hardware used in real-world aerospace and defense applications, with ownership across the full hardware lifecycle from concept through bring-up and validation. Desired Skills 5+ years of experience in electronic hardware or embedded system design Experience designing circuit boards and CCAs, including schematic capture and prototype bring-up Familiarity with analog, digital, or mixed-signal designs Proficiency with tools such as Altium, OrCAD, or similar schematic/layout tools Comfortable working hands-on in a lab environment and troubleshooting at the board level This is a full-time, on-site role in Irvine offering a compensation range of $140K-$170K depending on experience. Due to the nature of the work, U.S. Citizenship or Green Card status is required. This opportunity is ideal for engineers who want to work on impactful hardware projects in a fast-paced, engineering-driven environment.

Kosmos Group is an engineering consulting firm, specializing in electrical power generation, transmission, substation, and distribution. We support public and private utilities, consultants, and contractors across the U.S. and Canada, providing end-to-end engineering solutions, including conceptual design, feasibility study, detailed design, construction drawing package, field inspection, project closeout documentation, and more At Kosmos Group, we foster an open, collaborative, and supportive culture. We believe our employees reach their full potential when they feel valued and empowered through innovation, teamwork, and growth. We deliver reliable solutions for the future and are a positive influence in our communities Our Transmission Engineering team is looking for a Transmission Line Engineer to support our growing Transmission & Distribution practice in our Diamond Bar office. This is a hybrid position, working 3 days in the office and 2 days from home office. The successful candidate will be involved in all facets of transmission line routing and design. Specific areas of responsibility are provided below. Job Description Routing and design a variety of transmission line projects with project scopes varying from new to rebuilt facilities utilizing Power Line Systems software Responsible for technical content and deliverables while working with multi-discipline teams under the guidance of the assigned Project Engineer or Manager Sag tension calculation for transmission tower loading Structure design and analysis and preparing loading trees Assist in the development of design criteria and specifications for transmission line design and procurement of materials Perform peer quality checks Should be familiar with Transmission industry codes and standards Assist Engineer of Record in preparing construction documents including plan and profile drawings, structure loading trees, and foundation and assembly drawings Assist Engineer of Record with complex projects and be the lead engineer for smaller projects Provide construction support for high voltage transmission line projects Participate and progress the company culture of knowledge sharing and continuous improvement Act as a liaison between Kosmos Group engineering and construction teams by conducting field site visits Apply engineering principals and technical experience address project issues and recommend solutions Additional duties as assigned Required Qualifications Bachelor's degree in engineering from an ABET-accredited college An Engineering-in-Training (EIT) certificate Minimum 2 years of transmission line design experience Experience in Power Line System-based programs (i.e., PLS Suite of software including PLS-CADD, PLS-POLE, etc.) Strong attention to detail, team collaboration, organization, and problem-solving skills Ability to work methodically and analytically in a quantitative problem-solving environment Excellent written and verbal communication skills Ability to travel domestically and internationally as needed for project support Preferred Qualifications Prior engineering consulting experience For California only: this position's base salary range approximation is $100,000.00 - $148,000.00 and it depends on numerous factors such as applicable experience, skills, knowledge, credentials, geographical location, etc. We're seeking passionate individuals who bring fresh perspectives and innovative ideas. This is an exciting time to join our team as we gear up to grow and tackle future challenges. We prioritize safety, foster collaboration, act with integrity, respect all perspectives, and embrace forward-thinking. Are you ready to be a part of the journey? Kosmos Group is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Job Title: Senior Electrical & I&C Engineer - Water and Wastewater MKN is seeking a Senior Electrical & Instrumentation and Controls (I&C) Engineer to support the planning, design, and implementation of electrical and control systems for water and wastewater infrastructure projects. This role is ideal for a seasoned engineer with deep expertise in power distribution and control systems design, PLC/SCADA design/integration, and process instrumentation. You'll work closely with multidisciplinary teams to deliver technically sound and innovative solutions that serve public agencies and communities throughout California. We are a team-oriented and highly motivated group with offices in Irvine, Oceanside, Arroyo Grande, San Luis Obispo, Bakersfield, Fresno, San Jose, Ventura, and Santa Clarita. MKN strongly believes in and understands the importance of balancing work and personal life. Our recent awards, from Great Place to Work and Zweig Top Firms , are a testament to this value and the support we provide to our fellow team members. Our collaborative work environment and inclusive operating philosophy allow us to maintain a positive work culture while providing excellent service to our clients. Key Responsibilities: Design of electrical power distribution system (i.e. 480VAC and below) and I&C systems design ( for water and wastewater treatment facilities, pump stations, and distribution systems. Medium-voltage design experience is a plus. Develop electrical design drawings and specifications, including single-line diagrams, load calculations, panel layouts/schedules, cable/conduit sizing, grounding system design, indoor/outdoor lighting designs, conduit/cable schedules, protective relaying and metering, UPS and power conditioning systems, lightning and surge protection systems, motors and motor controls, and heat tracing design. Perform power system studies including load flow, short circuit, protective device coordination, arc flash analysis, and harmonic studies, using ETAP or SKM. Develop and specify I&C systems pertaining to process instrumentation (flow, pressure, level, analytical, etc.) and support control logic development and system integration, and develop P&IDs, I/O list, loop wiring diagrams, telemetry design and communication/network system architecture. Produce detailed construction contract drawings, specifications, and cost estimates for bid and permit packages. Coordinate with internal engineering teams, integrators, contractors, clients, and regulatory agencies throughout the project lifecycle. Mentor junior engineers and contribute to MKN's technical standards and design practices. Qualifications: Bachelor's degree in Electrical Engineering or related discipline from an accredited university or college. California Professional Engineer (PE) license in Electrical Engineering or Control Systems (or ability to obtain within 1 year). 5+ years of relevant experience in electrical and I&C design for municipal water and wastewater infrastructure. Strong understanding of low-voltage power systems, motor control, VFDs, MCCs, emergency power systems, and electrical codes and standards (NFPA70-NEC, NFPA 820, NFPA 70E, IEEE). Proven experience with power distribution, lighting, grounding, and PLC controls systems design. Proficient in AutoCAD, Revit, and design/analysis software (ETAP, SKM, RSLogix/Studio 5000). Familiarity with I&C specifications and process instrumentation in water/wastewater environments. Excellent communication skills, a collaborative spirit, and demonstrated ability to manage schedules and budgets. Strong attention to detail, organizational and time management skills, adaptable, agile, and responsive to quick changes in direction, with strategic thinking and problem-solving abilities. Why Join MKN? Be a technical leader on meaningful public infrastructure projects that impact California communities. Join a collaborative, award-winning team committed to innovation and excellence. Enjoy work-life balance, career growth opportunities, and continued professional development. Access competitive compensation and a comprehensive benefits package. Compensation & Benefits: Compensation is based on experience and qualifications. Anticipated salary range: $110,000 - $150,000. MKN offers a competitive benefits package including health insurance, retirement plan, paid time off, and support for licensure, continuing education, and training. Submit your resume and a brief cover letter to **************************** outlining your interest and qualifications for this position. MKN does not sponsor foreign nationals for employment-based visas or permanent residence.

We are seeking an experienced Electrical Engineer to support high-power system design and testing initiatives for our client in Irvine, CA. The ideal candidate will have strong hands-on experience with high-voltage circuits, power components, and lab testing, along with exposure to manufacturing support and documentation. Key Responsibilities: Design, develop, and implement technical solutions for high-voltage and high-power systems Support high-power testing and design testing fixtures Select and evaluate power components for electrical systems Perform hands-on testing using lab instruments such as oscilloscopes, RLC analyzers, and related equipment Create and maintain cable harness drawings using AutoCAD or similar tools Prepare and manage Bill of Materials (BOM) documentation Support manufacturing activities by troubleshooting issues and providing engineering solutions Collaborate with cross-functional engineering and production teams Required Skills & Qualifications: Experience working with high-voltage circuits and power component selection Hands-on experience with lab instruments (oscilloscopes, RLC analyzers, etc.) Experience designing testing fixtures for high-power systems Proficiency in AutoCAD for cable harness design Experience with BOM creation and manufacturing support Strong problem-solving and communication skills

Sustainable Solutions Motive Energy Sustainable Solutions is dedicated to creating sustainable, reliable, and efficient energy systems. We specialize in delivering high-quality Solar PV, Energy Storage Systems (ESS), and Electric Vehicle (EV) infrastructure solutions. Our team values innovation, collaboration, and growth, offering career advancement opportunities as we expand our nationwide footprint. Position Overview: We are seeking a Solar Performance & Commissioning Analyst to support our growing renewable energy portfolio. This position focuses on system performance modeling, production verification, and remote commissioning support for solar PV, ESS, and EV infrastructure projects. The ideal candidate has hands-on technical knowledge of system commissioning but prefers to apply that expertise in a more analytical, office-based setting. You'll ensure projects perform to design expectations by leveraging modeling tools, monitoring platforms, and performance data to validate real-world results and optimize future designs. Key Responsibilities Develop and refine production models using Helioscope, PVsyst, or similar tools to estimate system output based on site conditions and design parameters. Analyze post-installation system performance and identify discrepancies between modeled and actual production. Verify and configure system monitoring platforms (e.g., AlsoEnergy, PowerTrack, SolarEdge, CPS). Support remote commissioning and performance validation for Solar PV and ESS systems. Generate performance reports and provide actionable insights to engineering, construction, and operations teams. Collaborate with field teams to troubleshoot issues and confirm system configurations align with design intent. Maintain detailed documentation of system commissioning and performance data. Participate in the continuous improvement of modeling and monitoring workflows. Required Experience & Qualifications 5+ years of experience in commercial or utility-scale solar energy systems, with a focus on commissioning, system performance, or modeling. Proficiency in Helioscope, PVsyst, or comparable modeling tools. Experience using monitoring platforms such as AlsoEnergy or PowerTrack. Strong analytical skills with the ability to interpret performance data and identify root causes. Excellent communication skills and ability to collaborate across engineering, operations, and customer-facing teams. Preferred Qualifications Experience with energy storage system (ESS) commissioning or performance analysis. Familiarity with network communications (cellular, ethernet, or fiber) as they relate to monitoring systems. NABCEP certification (or in progress). Knowledge of data analysis tools (Excel, Power BI, Python, or similar).

Russell Sigler Inc. is a leading independent distributor in the HVAC industry, specializing in Carrier products for over 50 years. Our mission is to deliver exceptional service and products while fostering a supportive work environment for our employees. Position Summary: Controls Engineer is responsible for controls engineering, programming and service support for commercial control projects. Respond to customer needs by identifying system and product solutions. Assist customers in answering technical control questions. Conduct customer visits, events and training sessions with mechanical engineers, mechanical contractors and building owners. Communicate project changes to team members and customers. Key Duties and Responsibilities: Provide technical sales support to engineers, contractors and building owners Provide controls training to mechanical engineers, contractors, and owners Generate controls proposals that include a detailed scope of work based on project sequence of operations, specification, and drawings in accordance with division standards Create sequence of operations, select bill of materials as well as develop comprehensive bid strategies, design network layouts and produce electrical schematics Perform programming on system and network-level controllers Gather project design changes from the field team and create as-built drawings Follow department marketing strategies, policies, and procedures Create application notes, technical papers, service notes, and training documentation Secondary Duties and Responsibilities: Answer controls technical support calls Adhere to safety standards with a high degree of regard towards employee and subcontractor safety Critical Knowledge and Skills: Read architectural, mechanical, and electrical blueprints Understanding of mechanical systems and basic electrical knowledge Experience with installing programming and commissioning HVAC controllers Understand construction documentation, procedures and construction processes Proficient at using drafting software applications Communicate effectively and work in a team environment Good judgment, planning and multi-tasking skills Education and Experience: AA/AS degree w/2+ years related experience in the HVAC industry or BS degree in mechanical or electrical engineering, or related career field Expected Pay Range: Starting range at $75,000 annum, salary can fluctuate depending on relevant experience. ** Russell Sigler, Inc. (Sigler) is an equal opportunity employer. All applicants will be considered for employment based on merit, qualifications, and business need **

Hour: Monday - Friday 7:30am - 4:30pm Pay: $58,100 - $77,400 Direct Hire **Must be US Citizen or Permanent Resident ***Must be able to pass a background check/drug screen, cannot test positive for marijuana An industry leading manufacturer of gas and liquid analyzers is seeking an Electrical Engineer to join their team. This individual will be responsible for designing, developing, modifying, and evaluating electronic parts, components, or integrated circuitry for electronic equipment, and/or other hardware systems. Determines design approaches and parameters. Selects components and equipment based on analysis of specifications and reliability. May also review vendor capability to support product development. May use computer-assisted engineering and design software and equipment to perform assignments. Applies principles and techniques of electrical engineering to accomplish goals. Works under general supervision. Exercises judgment within defined procedures and practices to determine appropriate action; a certain degree of creativity and latitude is required. Job Duties: · Provides analysis related to the design, development, and implementation of electronic parts, components, or integrated circuitry for hardware systems. · Develops test strategies, devices, and systems. · Plan and implement research methodology and procedures to apply principles of electrical theory to engineering projects. · Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. · Performs stress and performance tests on a variety of computer hardware including circuit boards, processors, and wiring. · Operate computer-assisted engineering and design software and equipment to perform engineering tasks. · Designs and modifies PCB/PCA's using ECAD software. · Prepares and studies technical drawings, specifications of electrical systems, to ensure conformity to standards and customer requirements. · Generates architecture for functional components and assists with product architecture. · Delivers hardware designs through prototype, beta, and production release in compliance with product development process and quality practices. · Supports existing products by troubleshooting and failure analysis. · Participates in technical design reviews of existing designs and peer reviews. · Compile data and write reports regarding existing and potential engineering studies and projects. · Briefs others on deliverables, status, and progress. · Documents and demonstrates solutions by developing documentation, flowcharts, layouts, diagrams, and charts. · Provides information by collecting, analyzing, and summarizing development and service issues. · Intermediate level experience with design of analog and digital circuits · Ability to test designs to specification. · Circuit analysis skills using applied calculus and algebra, including component stress analysis. · Strong analytical, problem solving, communication and project management skills are required. · Daily availability to include evenings and weekends when necessary to reach goals and deadlines. Qualifications: · Bachelor's degree in a related field · 2 - 5 years directly related experience and/or training · Must have experience with Altium Software · Experience with Functional Safety (SIL) and ATEX Intrinsic Safety (Ex'ia') is a plus · Individuals that have strong communication skills, problem solvers, and project management skills are helpful All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

- V&V Engineer/System Verification Engineer rate- $55/hr Job descriptions: V&V Engineer (Verification & Validation Engineer), Matlab/Simulink Bachelor's Engineering degree in computer science, or related field 9 plus years of experience in system/software testing in Aerospace domain Experience in embedded System/software testing is mandatory Experience in scripting or coding implementing test cases into automation test scripts is mandatory Experience in Flight Controls systems or relevant aerospace systems Experience in Avionics standards like DO-178b or ARP-4754A guidelines Execution of test scripts on test environment and debugging Defect tracking and PR process Experience in data transfer protocols such as A429, CAN, etc Experience in Tools such as DOORS, SVN or MKS Soft Skills Excellent communication and leadership abilities. Ability to manage multiple priorities and deliver within deadlines.

HCLTech is looking for a highly talented and self-motivated Electrical Design Engineer to join it in advancing the technological world through innovation and creativity. Job Title: Electrical Design Engineer Position Type: Fulltime Location: Irvine, CA Key Responsibilities: Core Expertise End-to-end New Product Development (NPD) experience including system architecture, design, rapid prototyping, integration, testing, V&V, and design transfer. Strong knowledge of medical capital systems product lifecycle and disposables (e.g., catheters, endoscopes, pumps). Hands-on design experience in analog and digital board design involving microprocessors, microcontrollers, memory, sensors, and amplifiers. Proficiency in interface protocols such as I²C, UART, SPI, USB, and PCI. Expertise in high-density cable design, harnessing, and cabling. Tools & Standards Skilled in ECAD tools (OrCAD, Allegro) for schematic generation and PCB layout, including DFx and Gerber release. Experience in component engineering and BOM creation for prototype, pilot, and production phases. Strong understanding of IEC 60601, FDA submission requirements, and medical regulatory standards. Familiarity with VAVE analysis, vendor qualification, and supplier discussions. Testing & Validation Proficient in using test equipment such as oscilloscopes, multimeters, flow meters, and signal analyzers for troubleshooting and validation. Ability to draft test protocols, generate reports, and perform bench testing, system characterization, and verification. Soft Skills Excellent communication skills and ability to collaborate effectively with cross-functional teams. Strong problem-solving mindset and attention to detail. Education & Experience Bachelor's degree in Electrical Engineering or equivalent (Master's preferred). Minimum 5+ years of relevant experience in electrical design and development. Pay and Benefits Pay Range Minimum: $85000 per year Pay Range Maximum: $130000 per year HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. Compensation and Benefits A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year. How You'll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

We are currently looking for a Cost Engineer (Cost Controls Engineer) for projects in the greater Los Angeles Area. We are looking for a person that is capable of developing a deep understanding of the project documents, including; the contract with the owner, subcontracts, cost reports and specifications. This person should feel comfortable navigating and working within accounting and project documentation software, be detailed oriented with experience in the construction industry. The position is directly accountable for the financial performance and reporting, document control and project controls on site. This position will integrate with the project controls team that focuses, project cost and quantity reports, schedule development, procurement, equipment efficiencies, document control, and as-builts preparation & coordination. Your role on the structures team will depend on your desires as well as strengths and previous experience. You will need to develop and maintain strong relationships with other project engineers and managers, subcontractors, suppliers, and owner representatives. Key Responsibilities: Work on-site to help solve problems that occur during construction Develop and maintain thorough understanding of the contract, focusing on cost control requirements Monitor project costs and Job Cost Report Analyze and forecast monthly Total Cost Projection reports Cost compilation and tracking of extra work, contingencies, allowances, issues Develop and maintain tracking spreadsheets and documents Identify and implement strategies for enhanced cost control and tracking methods Participate in document control and tracking such as submittals, RFI's, and change management Collaborate and interface with project teams to facilitate proper cost and extra work tracking and billings Establish and maintain strong, professional relationships with the project team members to ensure clear communication, alignment on project goals, and proactive issue resolution. Qualifications: Bachelor's Degree in Engineering, Construction Management, or Business preferred 2+ Years of Experience in highway or roadway construction projects in California. Experience dealing with engineering or construction cost controls Excellent organizational, team management, problem solving, motivational skills. Apply Here: ******************************************************************************* Benefits: Health Insurance (Medical/Dental/Vision)-our company covers 80% of the healthcare cost for our employees and their dependents. Employees are responsible for the remaining 20%, which is pre-taxable. Company Vehicle or Vehicle Allowance Company Cell Phone or Allowance Flexible Spending Account (FSA)/Dependent Care FSA 401K with 8% Match Life insurance Employee Assistance Plan (EAP) Voluntary insurance plans available-Accident/Critical Illness/Cancer/Hospital Indemnity/Life and AD&D Paid time off Professional development assistance Work in a collaborative environment that fosters creativity, support and mutual respect. Myers & Sons Construction is proud to be an equal opportunity and affirmative action employer regardless of race, color, gender, age, sexual orientation, gender identity, religious beliefs, marital status, genetic information, national origin, disability, or protected veteran status

Engineer (Electrical) - Sustainability This position is bond-eligible and is strictly limited to work associated with capital construction, modernization, and sustainability projects. Duties performed under this position shall not include routine maintenance, repair, or operational tasks that fall within the responsibilities of facilities Maintenance & Operations (M&O). The scope of this role is exclusively tied to bond-eligible activities such as planning, design, construction, commissioning, and related project management functions necessary to deliver capital improvements consistent with the organization's requirements and legal limitations governing bond fund expenditures. Position Description: Lead and manage sustainability projects in accordance with District and program policies and procedures for College construction bond operations. Implement the electrification of central plants and other building systems outlined in the Board of Trustees' Clean Energy Resolution passed in July 9, 2020. Apply knowledge of Sustainable Building Principles and Standards to assist with complex systems level issues. Support districtwide energy master planning, carbon reduction, grid resiliency, and electrification initiatives. Apply knowledge of energy and environmental sustainability approaches, such as LEED credits, and its related impacts to operational efficiency. Understand Title 24 and ASHRAE recommendations. Coordinate with multi-disciplinary teams in conjunction with Project Managers, to meet project requirements and timelines. Assist College Project Teams (CPT's) with technical issues that require second opinions i.e. peer review of Request For Clarifications (RFC's), Change Orders, etc. Travelling to and from project sites upon request of attending project and construction meetings. Involvement in all parts of the project life cycle, to include master planning, design, construction, and closeout. Perform electrical engineering analysis and technical reports supporting District design guidelines. Ensure integration of LED lighting systems, PV, BESS, EV charging, microgrids, and smart controls. Perform other related duties as assigned. Minimum Required Qualifications: Bachelor's Degree in in Electrical Engineering. 10 or more years of professional electrical engineering experience in design, construction, or facilities infrastructure projects. Strong knowledge of California Energy Codes, Title 24 Energy Code, National Electrical Code (NEC), California Code of Regulations Part 11 (Cal Green Code) and applicable electrical engineering standards. Preferred Qualifications: 2 years' experience in Educational Facility Construction. Experience and/or certification in Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS). California Professional Engineering (PE) license in Electrical Engineering.

Kitchell seeks an experienced and dedicated Senior Electrical Engineer to join our Engineering and Architectural Team in our Irvine office and build a long-term career at one of the most innovative and growth-oriented building companies in the United States. Overview As a Senior Electrical Engineer, you will lead the design and analysis of electrical systems for a variety of projects, from concept through construction. This role involves developing technical specifications, ensuring code compliance, supporting construction and commissioning efforts, and contributing to business development initiatives. Location: This role is located in our Sacramento office and will be eligible for a hybrid schedule after a 60 waiting period. Duties and Responsibilities Prepares electrical system designs, including power distribution and lighting design, at the schematic, design development and construction document phases of a project. Analyzes design and construction issues for solutions and/or incorporation. Develops technical specifications as required. Performs design/constructability reviews. Comments on electrical issues, including cost, design and construction technology. Evaluates site and building conditions and prepares technical reports of investigations. Interprets applicable codes for compliance and applies this knowledge to documents prepared and/or reviewed to ascertain compliance with those codes, standards and requirements. Assists in maintaining log of all revisions to standard drawings and specifications, and manages the file containing current specifications and logs of all proposed changes to the standard documents. Assists in performing value engineering analysis and reviews. Assists the estimating department in the development of conceptual and detailed cost projections. Performs commissioning of electrical systems and monitors activities to ensure that construction, installation and operational testing conform to functional specifications and customer requirements. Supports and participates in business development and marketing efforts including the preparation of proposals and presentations for new work. Assists in the development and implementation of department design and document standards. Stamps engineering documents as required. Applies workplace health and safety policies and procedures to daily activities. Executes additional duties and responsibilities as assigned. Education and Experience Bachelor's degree from an accredited four-year college or university in engineering or related field or equivalent experience required. 10 or more years of position related work experience in engineering or related field. Knowledge and Skills Knowledge of applicable codes and standards required. Knowledge of the architecture, engineering and construction management industry is required. Effective computer skills including proficient use of Word, Excel, Outlook, PowerPoint Bluebeam, Revit and specialized software appropriate to professional qualification required; and scheduling database (Project) software preferred. Effective verbal and written communication skills, including the ability to foster and maintain effective interpersonal relationships is required. Effective organization skills, including the ability to prioritize and plan work is required. Ability to gather and interpret technical or abstract data to resolve extraordinarily difficult and uncommon problems is required. Ability to work well under pressure and adapt to frequent change, delays or unexpected events is required. Ability to manage a team of professionals in the production of quality projects delivered on time and within budget is required. Commitment to the values of Kitchell with attention to honesty and integrity, quality of work, customer satisfaction, people development, profitability and managing change is required. License and Certifications State of California Professional Engineer license is required. A valid driver's license with an acceptable motor vehicle record, free from suspensions or restrictions, is required. Travel Requirements This position is office based in our Irvine, CA Regional Office. Travel requirement is based on project needs through out California. Work Environment While performing the duties of this job, the employee must regularly work in an office and or construction environment. Conditions regularly include exposure to outdoor elements, hot/cold temperatures, wet conditions, noise, atmospheric conditions and cramped quarters. The noise level in the work environment is occasionally loud. Must frequently travel. Physical Requirements While performing the duties of this job, the employee must regularly sit, stand, walk, talk or hear and use hands to finger, feel and handle; frequently reach with hands and arms; occasionally climb or balance and stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. Must frequently lift and or move 10 pounds and occasionally lift and or move up to 50 pounds. ABOUT OUR COMPANY Founded in 1950, Kitchell began as a commercial contracting business and over the years developed new talents and enterprises, acquiring complementary businesses and expertise to remain competitive. Today, Kitchell Corporation serves as the holding entity for several companies that are integral to Kitchell's core business, as well as those that operate independently. We provide a wide range of services within the built environment, including general contracting, construction management, development, facilities management, engineering, architecture, and myriad other services. Our employees manage projects from our main offices located in Arizona, California, and Texas. We offer an entrepreneurial environment that fosters personal and professional growth through in-house education programs, formal and informal mentoring, and cross-training opportunities. At Kitchell, we prioritize internal growth and building careers from within. We consistently rank among the top places to work, thanks to our tenured staff and outstanding benefits that are designed to enrich our employees' physical, mental, emotional, and financial well-being. These benefits include company performance bonuses, discretionary stock options, incentive bonuses, health, and life insurance, health savings accounts (HSA) with wellness incentives, flexible spending accounts (FSA), 401(k) plans with a 4% company match, tuition reimbursement, weight loss programs, discounted auto insurance, identity theft protection, rewards programs, and much more. Kitchell is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status. The annual base salary range for this role is currently $125,000 - $175,000. The Company's salary ranges are determined by role, level, location, and alignment with market data. Individual pay is determined through interviews and an assessment of various factors, including job-related skills, relevant education and experience, abilities of the applicant and equity with other team members. The annual base salary range listed here is subject to change at any time, in the Company's discretion, and does not alter in any way the at-will nature of the employment relationship.

Millennium Space Systems, A Boeing Company delivers affordable, high-performance space systems for exacting customers. At Millennium, you will be part of a close-knit team working on exciting technological problems. We work in an open environment where ideas are shared across all disciplines, and there are ample opportunities for advancement based on excellence. Superstars are welcome. At Millennium, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company committed to fostering an environment for every teammate that's welcoming, respectful and innovative, with great opportunities for professional growth. Find your future with us. Job Summary The Control Engineer will lead the design, development, and implementation of control systems for advanced robotic automation projects. This role emphasizes PLC programming, robotic integration, and industrial control system design, including electrical schematics and control panel builds. The ideal candidate has extensive hands-on experience designing, programming, commissioning, and troubleshooting complex automated systems in manufacturing or process environments. This position's internal job code is MP&P Engineer. Our team is currently hiring for a level 5. Responsibilities System Design & Development Design, program, and integrate PLC-based control systems for robotic and automated machinery. Develop detailed electrical schematics, wiring diagrams, and I/O documentation. Design and oversee the build of control panels, ensuring compliance with relevant electrical and safety standards. Specify and configure hardware components such as PLCs, HMIs, servo drives, sensors, and safety devices. PLC & HMI Programming Develop structured and well-documented PLC code using IEC 61131-3 standard programming languages (Ladder Diagram, Structured Text, Function Block Diagram, Sequential Function Chart, and Instruction List). Program using major PLC platforms such as Allen-Bradley (Rockwell), Siemens, Beckhoff, or Mitsubishi. Design and program HMI/SCADA systems for intuitive operation, diagnostics, and data visualization. Robotics Integration Integrate and program industrial robots (Fanuc, ABB, KUKA, Yaskawa, Universal Robots, etc.) into automated cells. Develop motion control logic and establish robust communication between robots and PLC systems. Commissioning & Support Lead on-site installation, startup, and system validation at customer facilities. Troubleshoot control systems (hardware and software), identify root causes, and implement corrective actions. Provide training and technical support to maintenance and production teams. Project Leadership Serve as a technical lead, mentoring junior engineers and collaborating with mechanical, electrical, and software teams. Contribute to project planning, documentation, and timeline management. Ensure compliance with safety and industry standards (e.g., ISO, IEC, NFPA, CE). Minimum Qualifications Education: Bachelor's or Master's degree in Electrical Engineering, Control Systems, Mechatronics, or a related field. Experience: 15 years of experience in industrial control system design and PLC programming. Proven experience with robotic automation systems and motion control applications. Demonstrated ability to create electrical drawings and build or oversee the build of control panels. Strong understanding of industrial communication protocols (EtherNet/IP, ProfiNet, Modbus TCP, etc.). Familiarity with machine and functional safety systems. Technical Skills: Proficient in IEC 61131-3 programming languages (LD, ST, FBD, SFC, IL). Experience with HMI/SCADA platforms (FactoryTalk View, WinCC, Ignition, etc.). Ability to design and interpret electrical schematics using AutoCAD Electrical or EPLAN. Excellent troubleshooting and analytical skills for both electrical and software systems. This position requires an active U.S. Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Preferred Qualifications Strong communication, leadership, and collaboration abilities. Ability to manage multiple projects independently. Commitment to quality, safety, and continuous improvement. Advanced PLC Programmer Certificate like ( Advanced Logix 5000 Programmer Certificate) Summary Pay-Range Please note that the salary information shown below is a general guideline only of what is reasonably expected to be paid for the position. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Level 5: $165,750 - $243,750 Before applying, please note: Millennium is DDTC-registered, ITAR-compliant Company. This position is located at a facility that requires special access. Applicants MUST be U.S. citizens and eligible for a security clearance. Additionally, applicants must be willing to apply for and maintain a security clearance. We encourage all interested candidates to apply for any open position for which they feel they are qualified. Applicant Privacy Policy Mandatory Security Clearance and Access Process Disqualifying Criteria

Job Description Lead Automation and Controls Engineer - Build Scalable Manufacturing Systems for a Next Generation Materials Startup! El Segundo, CA | On-site Join a rapidly growing hardware startup that is transforming how high-performance composite components are manufactured for aerospace, defense, transportation, and next-generation mobility systems. This company is scaling a breakthrough materials and production technology that enables complex, lightweight structures to be manufactured at speeds far exceeding traditional composite processes. As the Lead Automation and Controls Engineer, you will take ownership of designing and growing the automation foundation that drives this cutting-edge production line. You will work across mechanical, electrical, operations, and manufacturing teams to deliver robust automated systems that transition the company from pilot scale into full-scale manufacturing. This is an opportunity to build automation from the ground up in an environment where your work has an immediate and visible impact on product output and business growth. About Us We are an emerging advanced manufacturing startup developing a novel method for producing high-strength composite components at unprecedented speed and scale. Our technology combines the performance characteristics of continuous fiber structures with the manufacturability and efficiency required for future aerospace and high-performance applications. Backed by strong investors and now moving quickly toward higher production volumes, we are building the engineering team that will support our next stage of growth. Job Duties Lead the strategy and execution of automated manufacturing systems, including robotics, conveyance, controls, sensors, and data infrastructure. Drive projects from early concept through design, procurement, system integration, testing, commissioning, and production ramp. Build and refine PLC and SCADA architectures that support automation reliability, scalability, safety, and maintainability. Develop technical specifications for equipment, evaluate new technologies, and select vendors and hardware to support automation expansion. Partner closely with mechanical engineering, manufacturing engineering, tooling, and quality teams to define requirements and deliver highly reliable automated solutions. Establish standards for system documentation, safety practices, programming conventions, and control system organization. Monitor key performance indicators such as cycle time, uptime, throughput, yield, and maintenance frequency, and drive continuous improvement initiatives. Create modular automation solutions that align with evolving production needs and future high volume manufacturing targets. Mentor or manage junior engineers and help define long term controls and automation team structure. Participate in supplier selection for automation components and develop strong partnerships with key equipment and integration partners. Ensure adherence to relevant safety, quality, and compliance requirements common in high performance aerospace and industrial manufacturing environments. Qualifications Bachelor's degree in Mechanical Engineering, Electrical Engineering, Mechatronics, Automation Engineering, or a related discipline. Advanced degree preferred. 8+ years of hands on experience creating, deploying, and scaling automation systems within a manufacturing setting. Proficiency with controls programming and industrial automation platforms such as Allen Bradley or Siemens, along with robotics integration experience using systems like FANUC or KUKA. Strong experience implementing motion control, PLC logic, HMI development, vision systems, and industrial networking. Proven ability to manage technical projects from design to production launch while coordinating across multiple engineering and operations functions. Experience setting automation architecture, developing standards, and mentoring other engineers. Excellent communication and presentation abilities with the skill to translate operational challenges into clear automation requirements. Ability to thrive in a fast-moving, hands-on startup environment that requires adaptability and a high degree of ownership. Preferred Experience Master's degree or PhD in a relevant engineering field. Background in advanced materials, composite processing, or high precision manufacturing. Experience supporting production in aerospace, defense, or similarly regulated environments with traceability and documentation requirements. Familiarity with manufacturing data tools, MES platforms, IoT sensors, and predictive maintenance concepts. Experience helping build automation teams or creating automation systems from the ground up within a scaling manufacturing organization. Publications, patents, or contributions related to automation, robotic controls, or advanced manufacturing technologies. Why Join Us Contribute to a breakthrough materials technology shaping the future of high-performance structural components. Join a high-growth startup transitioning from early pilot operations into true production scale. Build foundational automation systems that directly determine production capability and company success. Work in a fast-paced environment that encourages technical creativity, rapid iteration, and hands-on engineering. Opportunity to influence automation strategy, system architecture, and team design as the company grows. Equity participation available. Compensation Details $180,000 - $240,000 #LI-AV

Low Earth orbit is open for business. Varda is accelerating the development of commercial space infrastructure, from in-orbit pharmaceutical processing to reliable and economical reentry capsules. From life-saving pharmaceuticals to more powerful fiber optics, there is a world of products used on Earth today that can only be manufactured in space. Varda is accelerating innovation in the orbital economy by creating both the products and infrastructure needed so space can directly benefit life on Earth. Our mission is to expand the economic bounds of humankind. Our team is uniquely suited to accomplishing this goal, with leadership and staff comprised of veterans from SpaceX, Blue Origin, major pharmaceutical companies and Silicon Valley. Varda was founded in January 2021 by Will Bruey and Delian Asparouhov with significant backing from world class investors including Khosla Ventures, Lux Capital, Founders Fund, Caffeinated Capital, General Catalyst, and Also Capital. Varda is headquartered in El Segundo, California, where we have offices and a production facility where our vehicles, equipment, and materials are built, integrated, and tested. Varda also has offices in Washington, DC and Huntsville, AL (coming soon). Join Varda, and work to create a bustling in-space ecosystem. About this Role As Lead Automation and Controls Engineer at Varda, you'll lead the development of our custom test infrastructure and bespoke engineering solutions for spaceflight hardware. This role offers the opportunity to build and manage sophisticated ground support equipment (GSE) and test systems supporting spacecraft development and manufacturing operations. You'll establish a service-oriented engineering culture that creates tailored test infrastructure for multiple engineering groups across the organization. You'll work at the intersection of multiple engineering disciplines, bridging software, electrical, and mechanical domains to create integrated solutions for propulsion systems, payload qualification, and spacecraft-level testing that match the innovative nature of our mission. Key Responsibilities * Lead the development of custom test solutions and ground support equipment * Design, build, and maintain high-performance software and hardware systems to qualify and/or test flight hardware * Effectively manage development roadmap(s), budgets, and resources * Balance technical excellence with pragmatic solutions to meet aggressive timelines while maintaining safety and reliability * Develop comprehensive documentation for all custom systems * Mentor engineers and develop technical talent within the team Basic Qualifications: * BS in Mechanical/Electrical/Computer Engineering or related field * 5+ years of industry engineering experience * 3+ years of programming in Python for large deployments or test automation * 2+ years of experience in PLC programming, controls engineering, or similar hardware engineering experience * Strong technical leadership skills with ability to mentor and develop talent * Demonstrated track record of delivering complex technical projects on aggressive timelines * Ability to balance technical excellence with pragmatic solutions * Experience managing budgets and resources for technical projects * Excellent cross-functional communication and stakeholder management skills * Ability to operate effectively in a fast-paced, rapidly evolving environment Preferred Qualifications: * Experience with Docker and DevOps automation tools * Demonstrated technical expertise with modern PLC systems (Siemens, Rockwell, Beckhoff) * Experience with data acquisition platforms and visualization solutions (e.g., Grafana, InfluxDB) * Experience developing electromechanical test hardware * Track record of establishing a service-oriented culture * History of implementing standardized processes and documentation systems * Aerospace industry experience, particularly with spacecraft testing * Knowledge of environmental test systems (TVAC, thermal cycling, vibration) * Hands-on experience with high-pressure gas systems and fluid system testing * Background developing propulsion test stands or other complex test infrastructure * Familiarity with spacecraft qualification standards and certification processes Pay Range: * Salary range: $150,000 - $180,000/per year * This role is on-site in El Segundo, CA * Leveling and base salary is determined by job-related skills, education level, experience level, and job performance * You will be eligible for long-term incentives in the form of stock options and/or long-term cash awards * Offer compensation also includes the ability to receive stock options under the Company's Equity Incentive Plan. ITAR Requirements * Varda, like all employers, must ensure that its employees working in the United States are lawfully authorized to work in the U.S. Additionally, our employees are exposed to and have access to certain export-controlled items. At present, some of our technology to which employees have access requires a license to be exported to individuals other than "U.S. Persons" as defined in U.S. export regulations. Because our employees are provided access to export-controlled items, our current policy is to only hire "U.S. persons" who are permitted to have access to our technology without an export license. "US person" means: U.S. citizen, U.S. lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3) (i.e., individual admitted to the U.S. as a refugee or granted asylum in the U.S.) Learn more about the ITAR here. Benefits * Exciting team of professionals at the top of their field working by your side * Equity in a fully funded space startup with potential for significant growth (interns excluded) * 401(k) matching (interns excluded) * Unlimited PTO (interns excluded) * Health insurance, including Vision and Dental * Lunch and snacks provided on site every day. Dinners provided twice a week. * Maternity / Paternity leave (interns excluded) Varda Space Industries is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, martial status, mental or physical disability, or any other legally protected status. E-Verify Statement Varda Space Industries, Inc. participates in the U.S. Department of Homeland Security E-Verify program. The E-Verify program is an Internet-based employment eligibility verification system operated by the U.S. Citizenship and Immigration Services. Learn more about the E-Verify program. E-Verify Notice Right To Work Notice Read more Read more

Job DescriptionDescriptionAs an Automation & Controls Engineer at Impulse, you will be responsible for the design and commissioning of industrial machinery and systems for R&D, test, and production while working closely with a fast-paced, agile team. Responsibilities Own all aspects of equipment design from concept, requirements, and commissioning Generate necessary schematics and for electrical and fluid systems in EPlan to required standards Write and debug software for PLCs in TwinCAT that is maintainable and scalable Programming of various industrial controls hardware (VFDs, motor starters, PLCs, etc.) Selecting of application specific hardware (circuit protection, VFDs, motion systems, robots, etc.) Development of HMIs that are easy to use, functional, and can be used for diagnostics & troubleshooting Work with end users for end users to ensure equipment meets design intent Minimum Qualifications Bachelor's degree in a relevant engineering field 2+ years of work in a relevant field (manufacturing/test/R&D) Preferred Skills and Experience Familiarity of PLC systems Object oriented programming in structured text per IEC 61131-3 Industrial Safety Schematic design with EPlan 3D Control panel design with EPlan ProPanel Troubleshooting electrical and mechanical systems Understanding of ISO 13849, ANSI B11, or IEC 61508 safety standards Knowledge of UL508A, NFPA 70, NFPA 79 standards Familiarity with industrial protocols such as EtherCAT, Profinet, IO-Link, etc. Work with external vendors and manufacturers for sourcing hardware and solutions Experience with hazard risk assessments and mitigation plans Additional Requirements: Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Radiant is an El Segundo, CA-based startup building the world's first mass-produced, portable nuclear microreactors. The company's first reactor, Kaleidos, is a 1-megawatt failsafe microreactor that can be transported anywhere power is needed and run for up to five years without the need to refuel. Portable nuclear power with rapid deploy capability can replace similar-sized diesel generators, and provide critical asset support for hospitals, data centers, remote sites, and military bases. Radiant's unique, practical approach to nuclear development utilizes modern software engineering to rapidly achieve safe, factory-built microreactors that leverage existing, well-qualified materials. Founded in 2020, Radiant is on track to test its first reactor next year at the Idaho National Laboratory, with initial customer deliveries beginning in 2028. Senior Automation & Controls Engineer Radiant is seeking a highly motivated senior automation and controls engineer who will be working close with design and manufacturing engineers to design, build, and implement automated production and test equipment to support mass production and refueling of our microreactor technology. Responsibilities and Duties: Design, develop, and manage automation projects - this includes equipment ideation, machine commissioning, proof of rate capability, quality and reliability studies, and eventual hand-off to operational teams. Architect, write, and debug PLC code with an emphasis on generating code that is organized, structured, documented, maintainable, and reusable for high-volume manufacturing applications. Keep our factory safe and reliable by implementing ANSI/RIA R15.06 and OSHA compliant systems for robots, gantries, conveyors, and other manufacturing equipment. Design electrical systems compliant to NEC, NFPA, and UL508A regulations. Select and size electrical and electromechanical components such as servo motors and controllers. Manage electrical cabinet builds, field wiring, pneumatic and fluid plumbing. Generate aesthetically simple HMI screens to make complex machines easy to understand, operate, and troubleshoot. Required Skills and Qualifications: Bachelor's degree from an accredited institution in an engineering, physics, or computer science discipline. 4+ years of experience in the design and commissioning of automation and controls systems for industrial applications. Desired Skills and Qualifications: Master's degree from an accredited institution in an engineering discipline. Process integration and electromechanical/mechatronic systems experience. Experience in a variety of robotic weld applications (Kuka, ABB & Fanuc). Robot and PLC simulation experience. Electrical schematic CAD experience using Zuken E3. C#, .NET, python and/or SQL experience. PLC programming experience, preferably Beckhoff TwinCat 3. HMI and SCADA programming experience, preferably Inductive Automation Ignition. Field bus networks, serial communication and Ethernet communication. Hands-on experience building and commissioning high quality electrical control panels and electro-mechanical systems. Knowledge of NEC, NFPA 79, UL508A codes. Strong problem-solving skills and attention to detail. Self-motivated with strong organizational, written, and oral communication skills. Demonstrated ability to work collaboratively with design and operations teams. Additional Requirements: Must be willing to work extended hours and weekends as necessary to achieve company goals. Must work 100% onsite at El Segundo HQ. Total Compensation and Benefits Radiant's new hire compensation package includes base salary, substantial equity grants, and comprehensive benefits. Total compensation and level are determined through a holistic evaluation of your interview performance, experience, education, and qualifications. Benefits and Perks for Eligible Employees: Stock: Substantial incentive stock plan for all full-time employees. Medical: 100% premium coverage for base Silver level plan for employee + 50% premium coverage for dependents. Platinum plans available. One Medical: Sponsored memberships for eligible employees and their dependents. Vision: 100% premium coverage for top tier plan + 50% for dependents. Dental: 100% premium coverage for top tier plan (including orthodontia) + 50% for dependents. Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. Daily catered lunch. Free snacks and drinks. Flexible PTO policy. Remote workday allocation. Company and team-bonding events, happy hours and in-person camaraderie. Beautiful El Segundo headquarters close to the Pacific Ocean. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant's capacity to serve in compliance with U.S. export controls.

Company DescriptionJobs for Humanity is partnering with Supernal to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Supernal Job Description Supernal is at the forefront of creating emerging mobility solutions that will foster the development of human-centered cities. We are designing a completely new electric vertical take-off and landing (eVTOL) aircraft tailored to the mobility needs of future cities. This allows passengers a seamless intermodal journey that safely transports them to their final destination. We fuse research in autonomy, robotics, aviation and services to define a new category of mobility for the world's communities. We believe in creative thinking and collaboration to help build a better mobility experience for everyone, improving people's ability to move - whether for work or play. What we do: The Lead Flight Control Systems CLAW Engineer serves as a key member of the Flight Controls team, driving the development and deployment of algorithms for the electric vertical and take-off landing (eVTOL) vehicle. This role will participate in critical analysis of aircraft stability, construct the control architecture, and implement rigorous testing of control law implementation and dynamics. From desktop simulations to the systems integration lab, the Lead Engineer will be an integral part of the prototyping and certification process, ensuring compliance with ARP 4754A and DO-178C regulations. This role supports development of the control laws system requirements, and aids in the definition of the system best practices and philosophy. This role also works closely with multi-functional engineering teams to design and test control laws. What you can do: Design and implement flight control algorithms for a VTOL aircraft with a novel configuration Mastery in implementing classical and modern control law Oversee and conduct trade studies between different design considerations and control schemes Define and coordinate control system architecture and response types for an aircraft that might change configuration between flight regimes Conduct stability and control related analyses in time and frequency domain Collaborate with the systems engineering and other engineering specialty teams to define requirements related to the flight control system and system safety May require up to 10% of domestic and international travel Other duties as assigned What you can contribute: Bachelor's degree in aerospace or relevant engineering field required Minimum of ten (10) years of experience in flight control algorithm design for rotary-wing and/or fixed-wing Fly-By-Wire aircraft systems (an equivalent combination of education and experience may be considered) Strong experience in analyzing flight dynamic modes Experience with actuator and motor control loops Experience with mixing and blending of control surface commands Experience with flight testing and requirement definition Experience with sensor processing and Kalman filter design Experience with different modes of aircraft flight, including vertical lift Experience building control laws for remotely-controlled aircraft could be beneficial Experience with system identification and optimization tools (CIFER, CONDUIT) Experience in math model development of a physical system Familiarity with DO-178B/C, DO-160, DO-254, ARP 4754A, ARP 4761, and DO-331 Expertise in MathWorks tools for control algorithm development Familiarity with FAA part 23/25/27/29 or other certification experience Familiarity with aircraft handling quality requirements Excellent verbal and written communication skills Proactive delivery of communication and follow up Excellent organizational skills and attention to detail Must have the ability to independently plan, prioritize, and accomplish work within time constraints You may also be able to contribute: Experience in C++ preferred Master's or PhD preferred Any offer of employment is conditioned upon the successful completion of a background check. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, citizenship, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other category or class protected under applicable federal, state or local law. Individuals with disabilities may request a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at: [email protected] This position may include access to certain technology and/or software source code subject to U.S. export controls laws and regulations. If an export authorization from an applicable US regulatory agency is required in connection with your employment, your employment is contingent upon Supernal's receipt of such regulatory authorization(s) and your continued compliance with all conditions and limitations pursuant to such authorization(s). Base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a bonus as part of total compensation. The pay range for this position is:$192,400-$289,120 USD Click HERE or visit: *********************************** to view our benefits!