Controls engineer jobs in Colton, CA - 598 jobs

Senior RF Engineer Orange County, CA Our exciting Space client are looking for an RF engineer to be responsible for the RF design for a remote sensing payload, this roles responsibility includes the concept of operations (CONOPS) for the payload on the bus given on orbit constraints such as power, attitude, thermal loads. Being responsible for all aspects include the ground processing. With support as needed from the SAR/DevOps team, they will be responsible for designing and developing the ground-based solution that would work with various ground systems. Success in this role requires someone with very detailed experience with both SAR theory as well as hands on design experience for both the hardware and software. They will need to be a self-starter with strong initiative to assist in planning out the direction, executing on the plan, then adjusting the plan when unknowns become knowns. Key Responsibilities: Analyze and optimize RF design for Synthetic Aperture Radar (SAR) payloads while collaborating with cross-functional teams to meet project specifications Lead the design of complex systems involving high-speed digitizers, low-noise RF circuits, FPGAs, and embedded processors Work closely with SAR Engineers to test and validate SAR payloads and data collections Conduct detailed RF analysis for antennas and antenna arrays Create RF subsystem requirements and derive engineering requirements to meet project goals Perform microwave analysis using Python or similar tools Generate documentation and effectively communicate technical information to audiences of varying technical ability Contribute technical writing to RFIs, RFPs, and other business capture activities Ideal Qualifications: Advanced degree in Electrical Engineering, Computer Engineering, or similar field 8+ years of experience in a similar engineering role (RF Engineering, Electrical Engineering) 4+ years of experience in a spacecraft engineering discipline 4+ years of experience in high-speed electronics and RF design Experience in anechoic testing with phased antenna arrays Expertise in RF test automation and data analysis Expertise in electromagnetics, RF, and antenna theory Familiarity with SAR imaging concepts and system design Mastery of signal processing fundamentals, including the manipulation of complex-valued data Preferred Qualifications: 4+ years of hands-on experience in SAR payload design and integration Experience with assembly, integration, and testing for spacecraft/payloads Experience with embedded programming (C/C++) and FPGA design tools (Verilog/VHDL) Background in software configuration management (SCM) and CI/CD pipelines Experience in Python or scripting languages for test automation Experience with formal verification and validation of space-rated systems Due to Import control requirements candidates will need to be Must be a US person with a current TS/SCI clearance or ability to pursue one.

Kosmos Group is an engineering consulting firm, specializing in electrical power generation, transmission, substation, and distribution. We support public and private utilities, consultants, and contractors across the U.S. and Canada, providing end-to-end engineering solutions, including conceptual design, feasibility study, detailed design, construction drawing package, field inspection, project closeout documentation, and more At Kosmos Group, we foster an open, collaborative, and supportive culture. We believe our employees reach their full potential when they feel valued and empowered through innovation, teamwork, and growth. We deliver reliable solutions for the future and are a positive influence in our communities Our Transmission Engineering team is looking for a Transmission Line Engineer to support our growing Transmission & Distribution practice in our Diamond Bar office. This is a hybrid position, working 3 days in the office and 2 days from home office. The successful candidate will be involved in all facets of transmission line routing and design. Specific areas of responsibility are provided below. Job Description Routing and design a variety of transmission line projects with project scopes varying from new to rebuilt facilities utilizing Power Line Systems software Responsible for technical content and deliverables while working with multi-discipline teams under the guidance of the assigned Project Engineer or Manager Sag tension calculation for transmission tower loading Structure design and analysis and preparing loading trees Assist in the development of design criteria and specifications for transmission line design and procurement of materials Perform peer quality checks Should be familiar with Transmission industry codes and standards Assist Engineer of Record in preparing construction documents including plan and profile drawings, structure loading trees, and foundation and assembly drawings Assist Engineer of Record with complex projects and be the lead engineer for smaller projects Provide construction support for high voltage transmission line projects Participate and progress the company culture of knowledge sharing and continuous improvement Act as a liaison between Kosmos Group engineering and construction teams by conducting field site visits Apply engineering principals and technical experience address project issues and recommend solutions Additional duties as assigned Required Qualifications Bachelor's degree in engineering from an ABET-accredited college An Engineering-in-Training (EIT) certificate Minimum 2 years of transmission line design experience Experience in Power Line System-based programs (i.e., PLS Suite of software including PLS-CADD, PLS-POLE, etc.) Strong attention to detail, team collaboration, organization, and problem-solving skills Ability to work methodically and analytically in a quantitative problem-solving environment Excellent written and verbal communication skills Ability to travel domestically and internationally as needed for project support Preferred Qualifications Prior engineering consulting experience For California only: this position's base salary range approximation is $100,000.00 - $148,000.00 and it depends on numerous factors such as applicable experience, skills, knowledge, credentials, geographical location, etc. We're seeking passionate individuals who bring fresh perspectives and innovative ideas. This is an exciting time to join our team as we gear up to grow and tackle future challenges. We prioritize safety, foster collaboration, act with integrity, respect all perspectives, and embrace forward-thinking. Are you ready to be a part of the journey? Kosmos Group is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. WHAT YOU'LL DO Technical lead for electrical engineering team, creating embedded compute solutions for vehicle management, DSP, and networking. Own the full PCB development cycle of host boards for FPGAs / SoCs / SoMs (Developing requirements, schematic capture, board layout, bring-up, test, and integration). Develop and improve workflows throughout the FPGA / HDL design cycle (Architecture, functional block definition, simulation, system testing, HDL library standardization). Collaborate with internal stakeholders to develop a strategy for developing and rolling out your compute solutions across Anduril in a scalable manner. Create, maintain and communicate product development schedules with sufficient detail to ensure that all assigned personnel are aware of their tasks and deadlines. REQUIRED QUALIFICATIONS Bachelor's Degree in Electrical Engineering or equivalent 7+ years of experience designing, testing and troubleshooting complex board designs in military, automotive or similar hardware. Experience with leading an Electrical Engineering team focused on Digital Design Proficiency in an HDL language (VHDL, Verilog) Familiarity with common MCU, CPU, FPGA devices and technologies. Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc. Experience in design for signal integrity / power integrity. Knowledge of modern analog and digital electronics and electronic circuits. Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests. Proficient with Altium Designer or equivalent electronic design automation design tool Eligible to obtain and maintain an active U.S. Top Secret security clearance PREFERRED QUALIFICATIONS Understanding and familiarity with DO-254, DO-178C, DO-160, DO-311A Understanding and familiarity with MIL-STD-810, MIL-STD-704, MIL-STD-461 Expertise in computer networking Experience with implementing enhanced security measures US Salary Range$170,000-$213,000 USD The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: Platinum Healthcare Benefits:For U.S. roles, we offer comprehensive medical, dental, and vision plans at little to no cost to you. For UK roles, Private Medical Insurance (PMI): Anduril will cover the full cost of the insurance premium for an employee and dependents. For AUS roles, Private health plan through Bupa: Coverage is fully subsidized by Anduril. Basic Life/AD&D and long-term disability insurance 100% covered by Anduril, plus the option to purchase additional life insurance for you and your dependents. Extremely generous company holiday calendar including a holiday hiatus in December, and highly competitive PTO plans. 16 weeks of paid Caregiver & Wellness Leave to care for a family member, bond with your baby, or tend to your own medical condition. Family Planning & Parenting Support: Fertility (eg, IVF, preservation), adoption, and gestational carrier coverage with additional benefits and resources to provide support from planning to parenting. Mental Health Resources: We provide free mental health resources 24/7 including therapy, life coaching, and more. Additional work-life services, such as free legal and financial support, available to you as well. A professional development stipend is available to all Andurilians. Company-funded commuter benefits available based on your region. Relocation assistance (depending on role eligibility). 401(k) retirement savings plan - both a traditional and Roth 401(k). (US roles only) The recruiter assigned to this role can share more information about the specific compensation and benefit details associated with this role during the hiring process. Anduril is an equal-opportunity employer committed to creating a diverse and inclusive workplace. The Anduril team is made up of incredibly talented and unique individuals, who together are disrupting industry norms by creating new paths towards the future of defense technology. All qualified applicants will be treated with respect and receive equal consideration for employment without regard to race, color, creed, religion, sex, gender identity, sexual orientation, national origin, disability, uniform service, Veteran status, age, or any other protected characteristic per federal, state, or local law, including those with a criminal history, in a manner consistent with the requirements of applicable state and local laws, including the CA Fair Chance Initiative for Hiring Ordinance. We actively encourage members of recognized minorities, women, Veterans, and those with disabilities to apply, and we work to create a welcoming and supportive environment for all applicants throughout the interview process. If you are someone passionate about working on problems that have a real-world impact, we'd love to hear from you! To view Anduril's candidate data privacy policy, please visit ********************************************** #J-18808-Ljbffr

We are looking to bring on a senior-level Electrical Engineer to join a technical consulting team that works across a wide range of building types and industries. This role is ideal for someone who is confident in the field, strong in electrical fundamentals, and comfortable delivering clear, defensible engineering opinions to clients and legal teams. The work focuses on investigating electrical system failures and damage, determining cause and responsibility, and supporting complex matters that may involve insurance claims, disputes, or litigation. Assignments span commercial, industrial, infrastructure, municipal, and residential facilities. Responsibilities Perform on-site investigations of electrical systems and equipment to document existing conditions and damage following loss events such as fires, floods, storms, and equipment failures Analyze electrical components and systems to determine cause, origin, and contributing factors related to design, installation, construction practices, or product performance Apply applicable electrical and building codes to develop repair scope recommendations and support technical conclusions Review construction documents, drawings, specifications, and records to evaluate compliance with design intent and industry standards Provide electrical support to fire origin and cause investigations when electrical involvement is suspected Prepare clear, well-organized technical reports explaining findings, opinions, and recommendations Communicate regularly with clients, contractors, attorneys, and code officials to address technical issues and project needs Manage multiple active assignments while meeting schedules, budgets, and quality expectations Support the development and maintenance of client relationships Travel as required, sometimes on short notice Qualifications Bachelor of Science degree in Electrical Engineering from an ABET-accredited program Licensed Professional Engineer in California, with additional state licenses or the ability to obtain them preferred Minimum of seven years of electrical engineering experience, including design, field investigation, forensic work, or related technical roles Strong working knowledge of electrical and building codes including NEC, NFPA, and ICC standards Solid understanding of electrical systems, equipment, and construction practices across multiple facility types Hands-on field experience evaluating electrical systems and equipment in real-world conditions Experience estimating electrical repair or replacement scope is a plus Strong written and verbal communication skills, with the ability to explain technical issues to non-technical audiences Experience supporting litigation, including depositions, mediation, arbitration, or trial, is desirable Existing client relationships or business development experience is a strong advantage

Visium Resources has been asked to identify qualified candidates for this Electrical Designer/Drafter position. This position is a contract opportunity which is expected to be on-site in Anaheim, CA for a duration of 18 Months+. Architecture & Facilities Engineering (A&FE) is looking for an Electrical Designer/Drafts person to support the development and sustainment of the electrical distribution systems throughout the work environment. Our department supports the facility, attractions, entertainment, foods, and merchandise maintenance teams. You will support maintenance teams, minor system modifications and immediate response efforts. The objective of this position is to update facility drawings through drawing research and field verification. These drawings include electrical one-line diagrams, equipment layout and elevation drawings, motor control drawings, system control drawings etc. This role also involves close collaboration with other engineering disciplines and multiple project teams. Responsibilities Perform site visits for the retrieval of field data and the verification of existing drawings including details, measurements, existing conditions, product data. Coordinate and execute the update and correction of electrical one-line drawings, equipment layout and elevation drawings, motor control drawings, system control drawings and other electrical drawings as needed. Perform work that maintains design standards. Help coordinate photo documentation required to record existing conditions, prototypes, and completed projects. Assist engineers and designers as needed to resolve design compliance issues relating to electrical system's requirements. Research availability of As-Built Drawings in Electronic Data Management System Strong problem-solving skills and written / verbal communications skills. Required: Familiar with California Electrical code and California Energy Code (i.e., Title 24). Ability to develop concepts into drawings ready for construction. Minimum of five years of work experience in related engineering discipline with related field experience. Minimum of five years of AutoCAD and Revit experience with electrical drawing creation and modification. Education: Bachelor's Degree or equivalent experience. Preferred: BS Engineering from an ABET or ACCSC accredited university. Familiar with IEEE 3000 Standards for Industrial and Commercial Power Systems

- V&V Engineer/System Verification Engineer rate- $55/hr Job descriptions: V&V Engineer (Verification & Validation Engineer), Matlab/Simulink Bachelor's Engineering degree in computer science, or related field 9 plus years of experience in system/software testing in Aerospace domain Experience in embedded System/software testing is mandatory Experience in scripting or coding implementing test cases into automation test scripts is mandatory Experience in Flight Controls systems or relevant aerospace systems Experience in Avionics standards like DO-178b or ARP-4754A guidelines Execution of test scripts on test environment and debugging Defect tracking and PR process Experience in data transfer protocols such as A429, CAN, etc Experience in Tools such as DOORS, SVN or MKS Soft Skills Excellent communication and leadership abilities. Ability to manage multiple priorities and deliver within deadlines.

HCLTech is looking for a highly talented and self-motivated Electrical Design Engineer to join it in advancing the technological world through innovation and creativity. Job Title: Electrical Design Engineer Position Type: Fulltime Location: Irvine, CA Key Responsibilities: Core Expertise End-to-end New Product Development (NPD) experience including system architecture, design, rapid prototyping, integration, testing, V&V, and design transfer. Strong knowledge of medical capital systems product lifecycle and disposables (e.g., catheters, endoscopes, pumps). Hands-on design experience in analog and digital board design involving microprocessors, microcontrollers, memory, sensors, and amplifiers. Proficiency in interface protocols such as I²C, UART, SPI, USB, and PCI. Expertise in high-density cable design, harnessing, and cabling. Tools & Standards Skilled in ECAD tools (OrCAD, Allegro) for schematic generation and PCB layout, including DFx and Gerber release. Experience in component engineering and BOM creation for prototype, pilot, and production phases. Strong understanding of IEC 60601, FDA submission requirements, and medical regulatory standards. Familiarity with VAVE analysis, vendor qualification, and supplier discussions. Testing & Validation Proficient in using test equipment such as oscilloscopes, multimeters, flow meters, and signal analyzers for troubleshooting and validation. Ability to draft test protocols, generate reports, and perform bench testing, system characterization, and verification. Soft Skills Excellent communication skills and ability to collaborate effectively with cross-functional teams. Strong problem-solving mindset and attention to detail. Education & Experience Bachelor's degree in Electrical Engineering or equivalent (Master's preferred). Minimum 5+ years of relevant experience in electrical design and development. Pay and Benefits Pay Range Minimum: $85000 per year Pay Range Maximum: $130000 per year HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. Compensation and Benefits A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year. How You'll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Benefits: 401(k) matching Bonus based on performance Dental insurance Flexible schedule Free food & snacks Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Key Responsibilities Mechanical Design Design mechanical components, assemblies, frames, mechanisms, pneumatic/hydraulic systems as required. Generate detailed drawings, 3D models (e.g. SolidWorks, Inventor, etc.), select materials, finishes, and manufacturing methods. Perform mechanical stress/thermal/kinematic analyses as needed. Controls / Automation Design Specify, design, program, configure, test, and commission control systems (PLCs, HMIs, sensors, actuators, drives, etc.). Develop control logic, interlocks, safety features. Integrate mechanical components with control systems (e.g. feedback loops, motion control). Installation, Commissioning & Testing Oversee or perform machine build, wiring, panel design and assembly, installation on-site. Conduct machine start-ups, commissioning, debug mechanical and control issues. Test machines for performance, safety, compliance; debug and optimize. Maintenance, Troubleshooting & Improvement Diagnose mechanical and control-related problems in production equipment. Work with maintenance teams to reduce downtime, improve reliability. Lead continuous improvement projects (e.g. reduce cycle time, energy usage, improve quality). Documentation & Compliance Create and maintain documentation: mechanical drawings, control schematics, electrical wiring diagrams, user manuals, programming documentation. Ensure designs meet relevant safety, electrical, mechanical codes and standards. Support regulatory compliance and risk assessments (e.g. guarding, emergency stops, interlocks). Collaboration & Project Management Work with project managers to estimate costs, schedule work, define deliverables. Coordinate with vendors for components (electrical, mechanical) and evaluate vendor offerings. Communicate with other engineering disciplines (electrical, software), production, quality, and maintenance. Qualifications Education: Bachelor's degree in Mechanical Engineering, Mechatronics, Controls/Automation, Electrical Engineering, or equivalent. Experience: Typically 3-7 years of experience in mechanical design + control systems, ideally in manufacturing or packaging machinery. Technical Skills: Proficiency in CAD (SolidWorks, AutoCAD, etc.) for mechanical design. Strong PLC programming and debugging experience (e.g. Allen-Bradley, Siemens, etc.). Understanding of motion control, sensors, drives/VFDs. Ability to read and interpret electrical schematics, mechanical drawings. Knowledge of safety standards (e.g. OSHA, NFPA, relevant local & industry standards). Desired Skills & Attributes: Strong problem‐solving skills and attention to detail. Good communication skills, able to work cross‐departmentally. Ability to manage multiple projects, meet deadlines. Practical, hands‐on mindset; comfortable working both at desk (design) and shop/field (commissioning, troubleshooting). Optional / Nice to Have: Experience with robotics, vision systems. Familiarity with SCADA / networked control systems. Experience with predictive maintenance, data analytics. Working Conditions & Other Info May require travel to customer / installation sites. On-site work in production / machinery shop, occasionally lifting/moving heavy components, climbing, working at heights or in confined spaces as required. Standard hours, but possible overtime for project deadlines or emergency repairs. Performance Metrics / KPIs Machine uptime / reliability improvements. Successful completion of design & control projects on time and within budget. Reduction in mechanical or control failures / breakdowns. Improvements in cycle time, throughput, efficiency. Safety compliance, incident rates related to design & controls. Compensation: $90,000.00 - $115,000.00 per year Join Our TeamLooking for a new opportunity that is family-oriented, challenging and fun? That is how the BestPack team describes working here, so consider joining us! We are always looking for new talent that is self-motivated, resourceful, hungry to learn, and wants to provide solutions. If that sounds like you, please take a look at our openings and reach out to find your next adventure at BestPack. Who We AreBestPack has a team of truly awesome people and a culture that enthusiastically supports the growth of every member. Our company's core values are to be teachable, driven, resourceful, honest, and to have fun doing our work. These core values support our passion of helping each other thrive. If these values really resonate with you and you find yourself emphatically nodding along, you will probably really enjoy becoming part of the BestPack team! Perks 401(k) plan w/ employer match Flexible PTO program Paid holidays Comprehensive Health Plans Employer-paid Dental and Vision Growth Opportunities & More!

Why join us? It's an exciting time at AtkinsRéalis! We are rapidly growing in the US. Our company purpose is to build a better world for our planet and its people. We recognize the importance of making sure that our clients and employees, feel this purpose every day. AtkinsRéalis is proud of our company culture that promotes, diversity, equity and inclusion. Our company ethos include collaboration through the connection of people, data and technology. We are a global firm, who leverages having employees located throughout the world, creating valuable partnerships and doing our part to make this planet and its people, thrive. We need energetic, passionate and eager professionals like you to join our team. There has never been a better time to be a part of AtkinsRéalis! We are seeking a Protection & Controls Engineer to join our team in Binghamton, NY, Rochester, NY OR Orange, CT to lead and work on various Power Substation and P&C Engineering projects. The Protection & Controls Engineer reports to our Engineering Manager, NE Operations and requires working independently on fast paced technically complex design projects. P&C Engineers are responsible for supporting or leading substation engineering project teams, with the development of one-line diagrams for Substations, relay one-line diagrams, three lines, schematics and elementaries, control house panel layouts, relay selection, SCADA design, creation of bills of materials, and cable schedules. We are open to possibility of a hybrid work schedule depending on location. About Us AtkinsRéalis is one of the world's most respected design, engineering and project management consultancies. AtkinsRéalis has been providing infrastructure planning, engineering, construction, environmental consulting, urban planning, architecture, and program management services to public and private clients across the United States for more than 50 years. AtkinsRéalis has the depth and breadth of expertise to respond to the most technically challenging and time-critical infrastructure projects and the urgent transition to a low-carbon economy. How will you contribute to the team? Work within a multi-discipline team to develop efficient and reliable electrical design packages for medium and high voltage substations. Coordinate design activities to maintain project schedules, budget, quality requirements to ensure successful project completion. Assist in site visits and station walkdowns, estimating, and attending project meetings. Accountable to provide design activities in accordance with applicable codes and standards, including AtkinsRéalis's policies and procedures, such as Safety, Environmental, Quality Assurance and Quality Control. Design electrical substation facilities including one lines, three lines, schematics and elementaries, wiring and interconnections, P&C calculations, and reports, etc. Prepare specifications for material, equipment, and construction work. Deliver accurate and thorough electrical designs that will meet industry standards and specifications and meet prudent engineering practices. Review internal and external designs for code compliance, good design practice and constructability. Coordinate design activities with other multi-discipline project team members. Provide construction support including resolving site queries, attending site meetings, and performing site inspections during the construction phase of projects. Maintain complete project documentation with respect to engineering studies and calculations, all design packages, as-built requirements and return data information. Maintain good working relationship with internal groups that support projects such as other engineering disciplines, Drafting, Project Management etc. Mentor and provide guidance to developing engineers within the department. What will you contribute? Bachelor of Science degree in Electrical Engineering from a recognized institution. Minimum of 2 years' experience in P&C electrical design. A Professional Engineer (PE) registration (or eligible for registration) preferred. Experience with IEC61850/Goose Messaging. Proficiency in AutoCAD. Knowledge of applicable industry standards including the National Electric Code (NEC), National Electric Safety Code (NESC), and IEEE. Ability to perform independently and in a team environment and provide project ownership. Knowledge of modern power system, power system protection and transmission & distribution system. Prior utility or utility consulting experience is a plus. Strong client focus. A high level of interpersonal communication skills, including a strong command of the English language with good written and oral communication skills. Work Environment & Physical Demands: Additional hours may be necessary as workload dictates. Travel to client sites may be required. What we offer at AtkinsRéalis: AtkinsRéalis realizes that health, mental and financial wellbeing, are all equally needed to achieve balance in life. We are pleased to offer a robust rewards package that help our employees have peace of mind in and outside of work. Our benefit offerings address all of the areas that are part of living a healthy life. We recognize that what is important to people, continues to change. Some of our other benefits to ensure our employees feel supported, include continuing to offer health and dental coverage and a full list below. Our culture is one of providing support and training for our employees to thrive. We offer learning and development programs, training, career pathing opportunities, and a tuition reimbursement plan. At AtkinsRéalis, you will enjoy a robust rewards package which includes: Competitive salary Flexible work schedules Group Insurance PTO plus two Floating Holidays Paid Parental Leave (including maternity and paternity) Retirement Savings Plan with employer match Employee Assistance Program (EAP) An inclusive culture of Employee Resources Groups centered around women, African-Americans, Hispanics, LGBTQ+, Neurodiversity and Emerging Professionals A Foundation that is employee-funded with a 2-to-1 match from the company providing STEAM education for minorities from K-12 to college. If this sounds like you and you would like to expand your career with us, apply today! AtkinsRéalis is an equal opportunity, drug-free employer committed to diversity in the workplace. EOE/Minorities/Females/Veteran/Disability. Please review AtkinsRéalis Equal Opportunity Statement here: ************************************************************** AtkinsRéalis cares about your privacy and are committed to protecting your privacy. Please consult our Privacy Notice on our Careers site to know more about how we collect, use and transfer your Personal Data. By submitting your personal information to AtkinsRéalis, you confirm that you have read and accept our Privacy Notice. Expected compensation range is between $72,000 - $102,000 annually/hourly depending on skills, experience, and geographical location. Relocation assistance will be provided to qualified and approved candidates. Upon acceptance of an offer, all candidates must go through a drug screen test and background check. AtkinsRéalis is a federal contractor which mandates a satisfactory background screening report and drug test that supersedes state laws. Note to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency. ***************************************************** Worker TypeEmployeeJob TypeRegular At AtkinsRéalis , we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences.

at loan Depot Responsible for supporting initiatives that provide reasonable assurance that IT risks are effectively identified, assessed, managed, and reported across the enterprise. Ensures execution of Risk and Control Self-Assessments (RCSA), control testing, issue management, and risk reporting activities in alignment with the organization's governance framework. Supports the implementation and ongoing enhancement of ServiceNow IRM and demonstrates a strong understanding of end-to-end Governance, Risk, and Compliance (GRC) frameworks and processes. Assists in monitoring compliance with internal policies, regulatory obligations, and industry standards to strengthen the organization's overall control environment. This position ensures the performance of all duties in accordance with the company's policies and procedures, and all U.S. state and federal laws and regulations wherein the company operates. Responsibilities: Execute IT RCSA by coordinating with control owners to identify, assess, and document key risks, controls, and residual risk ratings. Support ongoing IT risk management by maintaining the Risk Register, performing risk assessments across processes, applications, and infrastructure, and monitoring changes in risk exposure. Track and validate remediation of issues and findings from RCSA, audits, and assessments; collaborate with issue owners to define corrective action plans and ensure timely resolution. Generate and maintain risk reports, dashboards, and metrics for management and governance committees, ensuring data integrity and traceability within the system of record (e.g., ServiceNow IRM). Apply knowledge of GRC and IT control frameworks (NIST CSF, ISO 27001, COBIT, FFIEC CAT, GLBA/NYDFS) to ensure consistent alignment of assessments, controls, and reporting. Support internal and external audit activities by providing control documentation, evidence, and status updates. Identify and recommend process and tool enhancements to improve efficiency, automation, and overall GRC program maturity in collaboration with IT, Security, Data, and Risk partners. Requirements: Bachelor's degree in information systems, Computer Science, Cybersecurity, or a related field required; equivalent experience may be considered. 3-5 years of experience in IT Risk Management, IT Controls, IT Audit, or GRC functions within financial services or a technology-driven organization. Hands-on experience with ServiceNow IRM or other GRC platforms, including risk, control, and issue management; UCF integration experience preferred. Experience performing RCSA, control testing, and issue management, with familiarity in frameworks such as NIST CSF, ISO 27001, COBIT, FFIEC CAT, and GLBA/NYDFS. Working knowledge of data analytics and SQL scripting to support control testing and risk reporting. Professional certifications such as CRISC, CISA, CISSP, or ITIL Foundation preferred. Demonstrates knowledge of, adherence to, monitoring, and responsibility for compliance with applicable regulatory and framework requirements including NIST CSF, ISO 27001, COBIT, FFIEC CAT, and GLBA/NYDFS Part 500. Demonstrates knowledge of IT Risk Management and Governance principles, including execution of RCSA, identification of key risks and controls, and assessment of residual risk exposure. Demonstrates hands-on experience performing control testing, including evidence collection, validation of control design and operating effectiveness, and documentation of results. Demonstrates understanding of core IT control domains, including but not limited to, access management, change management, configuration management, asset management, backup and recovery, vulnerability management, network security and operations, SDLC, product management, and data management. Demonstrates proficiency in data analytics and SQL scripting to extract, analyze, and validate data supporting risk assessments, control testing, and issue verification activities. Demonstrates experience maintaining and reporting on IT Risk Registers, metrics, and dashboards that communicate risk posture, control performance, and issue remediation progress. Demonstrates practical experience using GRC tools, preferably ServiceNow IRM, for documenting risks, controls, and issues; maintaining workflow integrity; and generating governance reports. Analytical and problem-solving skills with the ability to evaluate complex data, identify control gaps or process weaknesses, and recommend actionable improvements. Project management skills with the ability to manage multiple assessments, control testing activities, and reporting deliverables simultaneously. Relationship-building and influencing skills with the ability to communicate risk and control concepts clearly to technical and non-technical audiences. Effective organizational and time-management skills with the ability to balance competing priorities and meet deadlines in a dynamic environment. Exceptional verbal, written, and interpersonal communication skills with attention to accuracy, clarity, and documentation quality. Ability to prepare and deliver formal and informal presentations to management, audit, or governance committees regarding risk assessment and control testing results. Intermediate to advanced proficiency with Microsoft Office applications (Excel, Word, PowerPoint, Outlook) and familiarity with data visualization tools such as Power BI or Tableau. Ability to work independently with minimal supervision while maintaining accountability for assigned deliverables and quality standards. Demonstrates knowledge of Unified Compliance Framework (UCF) principles and the ability to support integration of UCF content into ServiceNow IRM to align control mappings, automate evidence collection, and standardize compliance reporting. Why work for #teamloan Depot: Competitive compensation package based on experience, skillset and overall fit for #TeamloanDepot. Inclusive, diverse, and collaborative culture where people from all backgrounds can thrive Work with other passionate, purposeful, and customer-centric people Extensive internal growth and professional development opportunities including tuition reimbursement Comprehensive benefits package including Medical/Dental/Vision Wellness program to support both mental and physical health Generous paid time off for both exempt and non-exempt positions About loan Depot: loan Depot (NYSE: LDI) is a digital commerce company committed to serving its customers throughout the home ownership journey. Since its launch in 2010, loan Depot has revolutionized the mortgage industry with a digital-first approach that makes it easier, faster, and less stressful to purchase or refinance a home. Today, as the nation's second largest non-bank retail mortgage lender, loan Depot enables customers to achieve the American dream of homeownership through a broad suite of lending and real estate services that simplify one of life's most complex transactions. With headquarters in Southern California and offices nationwide, loan Depot is committed to serving the communities in which its team lives and works through a variety of local, regional, and national philanthropic efforts. Base pay is one part of our total compensation package and is determined within a range. This provides the opportunity to progress as you grow and develop within a role. The base pay for this role is between $106,000 and $145,000. Your base pay will depend on multiple individualized factors, including your job-related knowledge/skills, qualifications, experience, and market location. We are an equal opportunity employer and value diversity in our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

The Cost Control Engineer is responsible for design feedback for optimum cost and processing performance for air filters, performance intake kits and residential filtration. This job entails working cross-functionally with Engineering, Procurement and Manufacturing to achieve corporate goals. This position will focus on avenues to reduce costs for existing and new products within the K&N family of brands. Essential Duties & Responsibilities: Clearly identify and report value engineering and cost reduction opportunities. Support the development of performance air filters, intake kits and residential HVAC filters. Track performance against the estimated budgeted pre-production costs. Support and provide cost reduction ideas and recommendations for air filter and supporting component production. Provide input on project scheduling. Monitor, control and analyze project cost information. Up to 50% travel to K&N's manufacturing plant in Dallas, Texas required. Experience, Skills & Education: Basic understanding of CAD design software; specifically SolidWorks. 5+ years of relevant experience. Bachelor's degree in Engineering. Proficient in Microsoft Office, Project, Excel, etc. Additional Qualities Necessary: Must be well organized and demonstrate the ability to handle multiple projects and duties. Ability to demonstrate excellent verbal and written communication skills. Consistently demonstrate a positive company image to K&N customers. Position is not remote and requires attendance in K&N's corporate office in Riverside, CA.

Job Description Automation and Controls Engineer - Consumer Products - Minimum of 4+ years' Experience - Manufacturing Engineering or Process Engineering with Automation Experience in Steel Stamping Processes ???? | ???? Join a Growing Consumer Products Manufacturer! Full benefits, 401k match, PTO, relocation assistance & more! We're looking for a Automation and Controls Engineer with a deep knowledge of Robots, Rockwell Automation Systems, and Sophisticated In-Line Stamping Equipment. You could be a well-seasoned Process or Manufacturing Engineer with Automation Controls Experience. ???? Key Responsibilities: Contribute to New Product / Project Programs for Stamped Metal Parts Collaborate with Customers, Production and Engineering Teams Knowledge of Robotics is a Must Have! Conduct Root Cause Analysis and Determine Effective Counter Measures for PLC, Automation and Robotic Concerns Help Support Prototype Builds and Program Launches Contribute to New Equipment Installations for Technical Assembly Knowledge of Automation Stamping Lines is a Must Have! Contribute to New Program Launches Assign work to Junior Engineers and Track Progress, as Directed Manage Overall Project Goals and KPI's Maintain Machinery Up-Time and Takt Time Must have Excellent Reporting Capability and Methodology ✅ Requirements: Automation Experience with In-Line Process Machinery, Stamping and Process Bachelor's degree with 4+ years in Process / Manufacturing Engineering in an Automotive or High Volume Consumer Products Environment with Robotics, PLC's, Automation Equipment, Stamping Press Lines. Strong Communication, Analysis, and Problem-Solving Skills CAD/SolidWorks, MS Project Robotics Experience and Ability to Program Robots Strong PLC Experience, Allen-Bradley, HMI's, Studio 5000, ControlLogix Experience and Good Understanding of Various Vision Systems BS in Mechanical / Electrical Engineering or Industrial Engineering or Equivalent Experience ???? Perks: Competitive pay + bonus potential Full medical, dental, vision coverage, life insurance 401k match, PTO, paid holidays Minimal travel + lifestyle perks Excellent growth & promotion potential ???? Join a high-growth company where innovation, quality, and leadership are valued! ???? Call Top Dog Engineers: ************

We have been exclusively engaged by a fast-growing, privately held food and beverage manufacturer seeking an experienced Controller to lead accounting and financial operations across one of the subsidiary business units. This role is ideal for someone who's hands-on, thrives in a fast-paced environment, and enjoys building structure and process from the ground up in an entrepreneurial setting. It's also a great opportunity for a rising star-someone who wants real responsibility, the chance to prove what they can do, and the runway to grow into bigger things as the company continues to succeed. Even better, you'll work closely with and be mentored by a CFO who's known for growing and developing people. What You'll Do Lead the monthly close and ensure accurate, GAAP-compliant reporting. Oversee cash flow, AR/AP, and inventory management. Strengthen cost accounting and margin reporting for better business insight. Manage and develop small accounting teams across both locations. Implement process improvements and drive consistency across entities. What We're Looking For Bachelor's in Accounting or Finance; CPA preferred. 8+ years of experience in accounting/finance, ideally in manufacturing or multi-entity environments. Strong Excel skills. Someone who can take the bull by the horns - proactive, organized, and confident managing competing priorities. Why You'll Love It Visible, high-impact role with direct exposure to executive leadership. Opportunity to bring structure and discipline to a growing organization. Mentorship from a CFO who's known for developing high performers. Stable ownership with a strong long-term growth vision. Competitive compensation and benefits package.

Jobs for Humanity is partnering with Supernal to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Supernal Job Description Supernal is at the forefront of creating emerging mobility solutions that will foster the development of human-centered cities. We are designing a completely new electric vertical take-off and landing (eVTOL) aircraft tailored to the mobility needs of future cities. This allows passengers a seamless intermodal journey that safely transports them to their final destination. We fuse research in autonomy, robotics, aviation and services to define a new category of mobility for the world's communities. We believe in creative thinking and collaboration to help build a better mobility experience for everyone, improving people's ability to move - whether for work or play. What we do: The Lead Flight Control Systems CLAW Engineer serves as a key member of the Flight Controls team, driving the development and deployment of algorithms for the electric vertical and take-off landing (eVTOL) vehicle. This role will participate in critical analysis of aircraft stability, construct the control architecture, and implement rigorous testing of control law implementation and dynamics. From desktop simulations to the systems integration lab, the Lead Engineer will be an integral part of the prototyping and certification process, ensuring compliance with ARP 4754A and DO-178C regulations. This role supports development of the control laws system requirements, and aids in the definition of the system best practices and philosophy. This role also works closely with multi-functional engineering teams to design and test control laws. What you can do: Design and implement flight control algorithms for a VTOL aircraft with a novel configuration Mastery in implementing classical and modern control law Oversee and conduct trade studies between different design considerations and control schemes Define and coordinate control system architecture and response types for an aircraft that might change configuration between flight regimes Conduct stability and control related analyses in time and frequency domain Collaborate with the systems engineering and other engineering specialty teams to define requirements related to the flight control system and system safety May require up to 10% of domestic and international travel Other duties as assigned What you can contribute: Bachelor's degree in aerospace or relevant engineering field required Minimum of ten (10) years of experience in flight control algorithm design for rotary-wing and/or fixed-wing Fly-By-Wire aircraft systems (an equivalent combination of education and experience may be considered) Strong experience in analyzing flight dynamic modes Experience with actuator and motor control loops Experience with mixing and blending of control surface commands Experience with flight testing and requirement definition Experience with sensor processing and Kalman filter design Experience with different modes of aircraft flight, including vertical lift Experience building control laws for remotely-controlled aircraft could be beneficial Experience with system identification and optimization tools (CIFER, CONDUIT) Experience in math model development of a physical system Familiarity with DO-178B/C, DO-160, DO-254, ARP 4754A, ARP 4761, and DO-331 Expertise in MathWorks tools for control algorithm development Familiarity with FAA part 23/25/27/29 or other certification experience Familiarity with aircraft handling quality requirements Excellent verbal and written communication skills Proactive delivery of communication and follow up Excellent organizational skills and attention to detail Must have the ability to independently plan, prioritize, and accomplish work within time constraints You may also be able to contribute: Experience in C++ preferred Master's or PhD preferred Any offer of employment is conditioned upon the successful completion of a background check. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, citizenship, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other category or class protected under applicable federal, state or local law. Individuals with disabilities may request a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at: [email protected] This position may include access to certain technology and/or software source code subject to U.S. export controls laws and regulations. If an export authorization from an applicable US regulatory agency is required in connection with your employment, your employment is contingent upon Supernal's receipt of such regulatory authorization(s) and your continued compliance with all conditions and limitations pursuant to such authorization(s). Base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a bonus as part of total compensation. The pay range for this position is: $192,400 - $289,120 USD Click HERE or visit: *********************************** to view our benefits!

Job Description Field AI is transforming how robots interact with the real world. We are building risk-aware, reliable, and field-ready AI systems that address the most complex challenges in robotics, unlocking the full potential of embodied intelligence. We go beyond typical data-driven approaches or pure transformer-based architectures, and are charting a new course, with already-globally-deployed solutions delivering real-world results and rapidly improving models through real-field applications. Field AI is building the future of autonomy-from rugged terrain to real-world deployment. We're on a mission to develop intelligent, adaptable robotic systems that operate beyond simulation and thrive in unpredictable environments. As our Robotics Autonomy Engineer - Locomotion, you'll lead the development and deployment of state-of-the-art reinforcement learning-based controllers for legged and humanoid robots. You'll be part of a deeply technical team advancing real-world robotic capabilities through cutting-edge research, simulation tools, and field validation.If designing locomotion systems that can navigate complex, dynamic environments excites you, and you want to work where your code hits the ground (literally)-this is your role. This is Field AI.What You'll Get To Do 1. Design RL-Based Locomotion Control Pipelines Architect and implement scalable reinforcement learning (RL) pipelines optimized for locomotion and manipulation. Integrate physics-based simulation environments (Isaac Gym, Isaac Lab, MuJoCo) with custom training workflows. Optimize reward functions, policy architectures, and sim-to-real transfer methods. 2. Develop and Test Locomotion Behaviors Create agile and robust policies for legged or humanoid robots in simulated and real-world conditions. Solve challenges in balance, contact-rich dynamics, and high-DOF coordination. Drive iterative testing across terrain variability and unstructured environments. 3. Own Simulation and Evaluation Environments Build scalable training environments using Isaac Sim and Isaac Gym. Automate evaluation across domain-randomized scenarios and domain adaptation protocols. Maintain high-performance simulation infrastructure for rapid prototyping and validation. 4. Collaborate Across Perception, Planning, and Hardware Teams Work closely with systems engineers, perception experts, and embedded teams to close the loop between learning and execution. Incorporate real-world telemetry to refine models and improve generalization. Lead deployment workflows from experiment to field robot testing. What You Have Master's degree or higher in Robotics, Computer Science, Engineering, or related field (PhD a strong plus). Deep expertise in reinforcement learning, especially for continuous control tasks. 2+ years of experience developing and deploying locomotion policies for robotic systems. Proficiency with simulation tools such as Isaac Gym, Isaac Lab, MuJoCo, or PyBullet. Strong understanding of contact dynamics, control theory, and kinematics. Experience with legged and/or humanoid robots (quadrupeds, bipedal systems, or exoskeletons). Solid Python and/or C++ development skills in Linux-based environments. Familiarity with machine learning frameworks (PyTorch, TensorFlow). The Extras That Set You Apart 3+ years of experience in an industry or startup robotics setting. Experience with real-world deployment of learned locomotion controllers. Publications or open-source contributions in locomotion, RL, or control. Familiarity with ROS or custom middleware for real-time control. Background in manipulation or whole-body coordination. Experience of deploying neural network models on robotic platforms. Experience debugging sim-to-real issues at scale. Contributions to reinforcement learning libraries or simulation platforms. Prior work on multi-agent learning or terrain-adaptive control systems. Our salary range is generous and we take into consideration an individual's background and experience in determining final salary; base pay offered may vary considerably depending on geographic location, job-related knowledge, skills, and experience. Why Join Field AI?We are solving one of the world's most complex challenges: deploying robots in unstructured, previously unknown environments. Our Field Foundational Models™ set a new standard in perception, planning, localization, and manipulation, ensuring our approach is explainable and safe for deployment. You will have the opportunity to work with a world-class team that thrives on creativity, resilience, and bold thinking. With a decade-long track record of deploying solutions in the field, winning DARPA challenge segments, and bringing expertise from organizations like DeepMind, NASA JPL, Boston Dynamics, NVIDIA, Amazon, Tesla Autopilot, Cruise Self-Driving, Zoox, Toyota Research Institute, and SpaceX, we are set to achieve our ambitious goals. Be Part of the Next Robotics RevolutionTo tackle such ambitious challenges, we need a team as unique as our vision - innovators who go beyond conventional methods and are eager to tackle tough, uncharted questions. We're seeking individuals who challenge the status quo, dive into uncharted territory, and bring interdisciplinary expertise. Our team requires not only top AI talent but also exceptional software developers, engineers, product designers, field deployment experts, and communicators. We are headquartered in always-sunny Mission Viejo (Irvine adjacent), Southern California and have US based and global teammates. Join us, shape the future, and be part of a fun, close-knit team on an exciting journey! We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Responsibilities ● Ownership of key electrical sub-systems and functionals within new DC high power charging products ● Delivery of electrical hardware and charging functions by co-ordinating cross functional decision making between hardware and software teams ● Ownership of requirements development and coordination of sign off across multiple teams including vehicle, cloud and mobile ● Contribute to architecture development and electrical system-level design for all charging products ● Analyze and evaluate design impacts associated with alternate designs or new components and vendors. ● Collaborate with validation teams on system/sub-system plans for requirement traceability. This includes taking ownership of the requirements from definition through to comprehensive testing and verification. ● Proactively and independently solve routine problems, contributing meaningfully to team objectives. ● Work closely with the software team to define interfaces, troubleshoot issues, and ensure the successful integration of charging hardware and software systems. ● Analyze test data to identify performance trends and areas for optimization in electrical and power systems. ● Work closely with the design team to suggest and implement modifications that improve product performance, durability, and user satisfaction. ● Create and maintain essential technical documentation, including schematics, manuals, specifications, and test reports. ● As a highly skilled specialist, you will contribute to the development of concepts and techniques and complete complex tasks in creative and effective ways. Qualifications Required Qualifications: ● Bachelor's degree in Electrical Engineering, Software Engineering, or equivalent. ● Typically requires a minimum of 3+ years of system engineering related experience. ● Proficiency in requirements management tools and agile project management tools (Jira and Confluence preferred). ● Proficiency in applying DFMEA's, functional safety analysis and/or other systems engineering tools ● Proficiency is using common languages for data analysis and leveraging Ai tools as part of daily workflow Preferred Qualifications: ● Experience developing EV charging products or significant understanding of the EV charging space ● Compliance experience with UL/IEEE/SAE standards is a plus. ● Demonstrated experience in systems engineering within electric vehicle charging, power conversion equipment, and/or renewable energy (PV, energy storage). ● Experience working with high-voltage systems ● Confident in use of data analysis platforms such as Databricks ● Experience working with different communication protocols and integrating complex systems Pay Disclosure Salary Range SoCal-Based Applicants: $96,700-$120,900 (actual compensation will be determined based on experience, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Required Qualifications: ● Bachelor's degree in Electrical Engineering, Software Engineering, or equivalent. ● Typically requires a minimum of 3+ years of system engineering related experience. ● Proficiency in requirements management tools and agile project management tools (Jira and Confluence preferred). ● Proficiency in applying DFMEA's, functional safety analysis and/or other systems engineering tools ● Proficiency is using common languages for data analysis and leveraging Ai tools as part of daily workflow Preferred Qualifications: ● Experience developing EV charging products or significant understanding of the EV charging space ● Compliance experience with UL/IEEE/SAE standards is a plus. ● Demonstrated experience in systems engineering within electric vehicle charging, power conversion equipment, and/or renewable energy (PV, energy storage). ● Experience working with high-voltage systems ● Confident in use of data analysis platforms such as Databricks ● Experience working with different communication protocols and integrating complex systems ● Ownership of key electrical sub-systems and functionals within new DC high power charging products ● Delivery of electrical hardware and charging functions by co-ordinating cross functional decision making between hardware and software teams ● Ownership of requirements development and coordination of sign off across multiple teams including vehicle, cloud and mobile ● Contribute to architecture development and electrical system-level design for all charging products ● Analyze and evaluate design impacts associated with alternate designs or new components and vendors. ● Collaborate with validation teams on system/sub-system plans for requirement traceability. This includes taking ownership of the requirements from definition through to comprehensive testing and verification. ● Proactively and independently solve routine problems, contributing meaningfully to team objectives. ● Work closely with the software team to define interfaces, troubleshoot issues, and ensure the successful integration of charging hardware and software systems. ● Analyze test data to identify performance trends and areas for optimization in electrical and power systems. ● Work closely with the design team to suggest and implement modifications that improve product performance, durability, and user satisfaction. ● Create and maintain essential technical documentation, including schematics, manuals, specifications, and test reports. ● As a highly skilled specialist, you will contribute to the development of concepts and techniques and complete complex tasks in creative and effective ways.

Our Culture DZYNE Technologies is leading the future of autonomous defense. Based in Irvine, California, we develop and manufacture advanced airborne and ground-based defense solutions deployed in over 50 countries. Backed by U.S. Government Programs of Record, our technologies are field-proven, scalable, and production-ready. We're growing fast and looking for innovators ready to make an impact. At DZYNE, you'll join a culture built on collaboration, integrity, and purpose. We celebrate wins, value diverse perspectives, and support every team member's success. Ready to do work that matters? Join us. Position: Autonomous Systems Electrical Engineer Location: Irvine, California Position Description: The Autonomous Systems Electrical Engineer in this position will perform assigned electrical engineering tasks including circuit and subsystem design, system integration, troubleshooting, wire harness design, electromechanical/electrical system testing, and data analysis. This position reports to the Electrical Engineering Manager, while working directly with Vehicle Technical Leads and Program Managers. Responsibilities: Work with the team to design and build subsystem/hardware/software for our aircraft systems Prepare and create schematics, engineering drawings, test plans/procedures Collaborate with mechanical, GNC, manufacturing, aerodynamic, procurement, quality assurance, and project/program management teams Demonstrate and encourage adherence to best practices and standard procedures Required Skills/ Qualifications: Proven understanding of Electrical Engineering principles Demonstrated skills in troubleshooting, validating/testing, and analyzing subsystems/systems Experience in documenting designs and analyses with written reports Ability to design using CAD software such as Altium Proven communication and interpersonal skills Preferred Skills/Qualifications: Experience in designing robotic and/or aircraft systems UAV experience highly desired Hands-on experience with microcontrollers and firmware/software Experience in small to medium sized teams in an R&D environment Familiar with MIL spec hardware and harnessing standards Education/Experience: Bachelor's degree in electrical engineering with 3-5+ years progressive experience Working Conditions: The diversity of work conditions may range from an environment where there is little or no physical discomfort, such as a general office environment or warehouse. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must have the ability to stand, climb, occasionally lift a minimum of 25 lbs. Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine Involves movement between departments, floors, and worksites to facilitate work. May be performing physical activities including, but not limited to, heavy lifting and moving of items, climbing in and out of equipment, crawling, and working outdoors. Other Requirements: It is an essential requirement for the person in this role to have a legal right to work in the United States and be eligible to obtain any required Export Authorization and DoD Clearance. Salary: $90,000 - $120,000 annually Salary depends on relevant work experience, education, training, essential skills, and/or other factors such as specialized or high-demand professions. In addition to the annual salary, the position will be eligible for an annual bonus. The pay range for this job level is a general guideline only and not a guarantee of salary or $annual bonus. Benefits: Our benefits are DZYNE'ed for your overall health and financial wellness. DZYNE provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability. DZYNE Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, disability, or protected veteran status. In addition to federal law requirements, DZYNE Technologies complies with applicable state and local laws governing nondiscrimination in employment in every location in which our company has facilities. This policy applies to all terms and conditions of employment. #LI-ONSITE

Responsible for supporting initiatives that provide reasonable assurance that IT risks are effectively identified, assessed, managed, and reported across the enterprise. Ensures execution of Risk and Control Self-Assessments (RCSA), control testing, issue management, and risk reporting activities in alignment with the organization's governance framework. Supports the implementation and ongoing enhancement of ServiceNow IRM and demonstrates a strong understanding of end-to-end Governance, Risk, and Compliance (GRC) frameworks and processes. Assists in monitoring compliance with internal policies, regulatory obligations, and industry standards to strengthen the organization's overall control environment. This position ensures the performance of all duties in accordance with the company's policies and procedures, and all U.S. state and federal laws and regulations wherein the company operates. Responsibilities: * Execute IT RCSA by coordinating with control owners to identify, assess, and document key risks, controls, and residual risk ratings. * Support ongoing IT risk management by maintaining the Risk Register, performing risk assessments across processes, applications, and infrastructure, and monitoring changes in risk exposure. * Track and validate remediation of issues and findings from RCSA, audits, and assessments; collaborate with issue owners to define corrective action plans and ensure timely resolution. * Generate and maintain risk reports, dashboards, and metrics for management and governance committees, ensuring data integrity and traceability within the system of record (e.g., ServiceNow IRM). * Apply knowledge of GRC and IT control frameworks (NIST CSF, ISO 27001, COBIT, FFIEC CAT, GLBA/NYDFS) to ensure consistent alignment of assessments, controls, and reporting. * Support internal and external audit activities by providing control documentation, evidence, and status updates. * Identify and recommend process and tool enhancements to improve efficiency, automation, and overall GRC program maturity in collaboration with IT, Security, Data, and Risk partners. Requirements: * Bachelor's degree in information systems, Computer Science, Cybersecurity, or a related field required; equivalent experience may be considered. * 3-5 years of experience in IT Risk Management, IT Controls, IT Audit, or GRC functions within financial services or a technology-driven organization. * Hands-on experience with ServiceNow IRM or other GRC platforms, including risk, control, and issue management; UCF integration experience preferred. * Experience performing RCSA, control testing, and issue management, with familiarity in frameworks such as NIST CSF, ISO 27001, COBIT, FFIEC CAT, and GLBA/NYDFS. * Working knowledge of data analytics and SQL scripting to support control testing and risk reporting. * Professional certifications such as CRISC, CISA, CISSP, or ITIL Foundation preferred. * Demonstrates knowledge of, adherence to, monitoring, and responsibility for compliance with applicable regulatory and framework requirements including NIST CSF, ISO 27001, COBIT, FFIEC CAT, and GLBA/NYDFS Part 500. * Demonstrates knowledge of IT Risk Management and Governance principles, including execution of RCSA, identification of key risks and controls, and assessment of residual risk exposure. * Demonstrates hands-on experience performing control testing, including evidence collection, validation of control design and operating effectiveness, and documentation of results. * Demonstrates understanding of core IT control domains, including but not limited to, access management, change management, configuration management, asset management, backup and recovery, vulnerability management, network security and operations, SDLC, product management, and data management. * Demonstrates proficiency in data analytics and SQL scripting to extract, analyze, and validate data supporting risk assessments, control testing, and issue verification activities. * Demonstrates experience maintaining and reporting on IT Risk Registers, metrics, and dashboards that communicate risk posture, control performance, and issue remediation progress. * Demonstrates practical experience using GRC tools, preferably ServiceNow IRM, for documenting risks, controls, and issues; maintaining workflow integrity; and generating governance reports. * Analytical and problem-solving skills with the ability to evaluate complex data, identify control gaps or process weaknesses, and recommend actionable improvements. * Project management skills with the ability to manage multiple assessments, control testing activities, and reporting deliverables simultaneously. * Relationship-building and influencing skills with the ability to communicate risk and control concepts clearly to technical and non-technical audiences. * Effective organizational and time-management skills with the ability to balance competing priorities and meet deadlines in a dynamic environment. * Exceptional verbal, written, and interpersonal communication skills with attention to accuracy, clarity, and documentation quality. * Ability to prepare and deliver formal and informal presentations to management, audit, or governance committees regarding risk assessment and control testing results. * Intermediate to advanced proficiency with Microsoft Office applications (Excel, Word, PowerPoint, Outlook) and familiarity with data visualization tools such as Power BI or Tableau. * Ability to work independently with minimal supervision while maintaining accountability for assigned deliverables and quality standards. * Demonstrates knowledge of Unified Compliance Framework (UCF) principles and the ability to support integration of UCF content into ServiceNow IRM to align control mappings, automate evidence collection, and standardize compliance reporting. Why work for #teamloan Depot: * Competitive compensation package based on experience, skillset and overall fit for #TeamloanDepot. * Inclusive, diverse, and collaborative culture where people from all backgrounds can thrive * Work with other passionate, purposeful, and customer-centric people * Extensive internal growth and professional development opportunities including tuition reimbursement * Comprehensive benefits package including Medical/Dental/Vision * Wellness program to support both mental and physical health * Generous paid time off for both exempt and non-exempt positions About loan Depot: loan Depot (NYSE: LDI) is a digital commerce company committed to serving its customers throughout the home ownership journey. Since its launch in 2010, loan Depot has revolutionized the mortgage industry with a digital-first approach that makes it easier, faster, and less stressful to purchase or refinance a home. Today, as the nation's second largest non-bank retail mortgage lender, loan Depot enables customers to achieve the American dream of homeownership through a broad suite of lending and real estate services that simplify one of life's most complex transactions. With headquarters in Southern California and offices nationwide, loan Depot is committed to serving the communities in which its team lives and works through a variety of local, regional, and national philanthropic efforts. Base pay is one part of our total compensation package and is determined within a range. This provides the opportunity to progress as you grow and develop within a role. The base pay for this role is between $106,000 and $145,000. Your base pay will depend on multiple individualized factors, including your job-related knowledge/skills, qualifications, experience, and market location. We are an equal opportunity employer and value diversity in our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Company DescriptionJobs for Humanity is partnering with Supernal to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Supernal Job Description Supernal is at the forefront of creating emerging mobility solutions that will foster the development of human-centered cities. We are designing a completely new electric vertical take-off and landing (eVTOL) aircraft tailored to the mobility needs of future cities. This allows passengers a seamless intermodal journey that safely transports them to their final destination. We fuse research in autonomy, robotics, aviation and services to define a new category of mobility for the world's communities. We believe in creative thinking and collaboration to help build a better mobility experience for everyone, improving people's ability to move - whether for work or play. What we do: The Lead Flight Control Systems CLAW Engineer serves as a key member of the Flight Controls team, driving the development and deployment of algorithms for the electric vertical and take-off landing (eVTOL) vehicle. This role will participate in critical analysis of aircraft stability, construct the control architecture, and implement rigorous testing of control law implementation and dynamics. From desktop simulations to the systems integration lab, the Lead Engineer will be an integral part of the prototyping and certification process, ensuring compliance with ARP 4754A and DO-178C regulations. This role supports development of the control laws system requirements, and aids in the definition of the system best practices and philosophy. This role also works closely with multi-functional engineering teams to design and test control laws. What you can do: Design and implement flight control algorithms for a VTOL aircraft with a novel configuration Mastery in implementing classical and modern control law Oversee and conduct trade studies between different design considerations and control schemes Define and coordinate control system architecture and response types for an aircraft that might change configuration between flight regimes Conduct stability and control related analyses in time and frequency domain Collaborate with the systems engineering and other engineering specialty teams to define requirements related to the flight control system and system safety May require up to 10% of domestic and international travel Other duties as assigned What you can contribute: Bachelor's degree in aerospace or relevant engineering field required Minimum of ten (10) years of experience in flight control algorithm design for rotary-wing and/or fixed-wing Fly-By-Wire aircraft systems (an equivalent combination of education and experience may be considered) Strong experience in analyzing flight dynamic modes Experience with actuator and motor control loops Experience with mixing and blending of control surface commands Experience with flight testing and requirement definition Experience with sensor processing and Kalman filter design Experience with different modes of aircraft flight, including vertical lift Experience building control laws for remotely-controlled aircraft could be beneficial Experience with system identification and optimization tools (CIFER, CONDUIT) Experience in math model development of a physical system Familiarity with DO-178B/C, DO-160, DO-254, ARP 4754A, ARP 4761, and DO-331 Expertise in MathWorks tools for control algorithm development Familiarity with FAA part 23/25/27/29 or other certification experience Familiarity with aircraft handling quality requirements Excellent verbal and written communication skills Proactive delivery of communication and follow up Excellent organizational skills and attention to detail Must have the ability to independently plan, prioritize, and accomplish work within time constraints You may also be able to contribute: Experience in C++ preferred Master's or PhD preferred Any offer of employment is conditioned upon the successful completion of a background check. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, citizenship, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other category or class protected under applicable federal, state or local law. Individuals with disabilities may request a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at: [email protected] This position may include access to certain technology and/or software source code subject to U.S. export controls laws and regulations. If an export authorization from an applicable US regulatory agency is required in connection with your employment, your employment is contingent upon Supernal's receipt of such regulatory authorization(s) and your continued compliance with all conditions and limitations pursuant to such authorization(s). Base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a bonus as part of total compensation. The pay range for this position is:$192,400-$289,120 USD Click HERE or visit: *********************************** to view our benefits!