Controls technician jobs in Exeter, PA

Mosquito Squad of Chester and Delaware Counties provides expert solutions to help control mosquitoes, ticks and fleas allowing our customers to enjoy their yards! Using an integrated pest management (IPM) approach we will help to eliminate annoying pests. In addition to providing expert advice to homeowners on how to reduce mosquito and tick populations, Mosquito Squad can provide the right solution for their needs. From our full season barrier treatments to the ultimate in effective misting systems, Mosquito Squad will work to ensure the maximum use of our customers outdoor space. Job Description At MOSQUITO SQUAD , our people bring tremendous pride and integrity to everything we do. In turn, we provide a working environment where these skilled professionals can achieve true satisfaction in their own lives. If you're committed to providing the highest level of client service, we have an ideal opportunity for you. In this position, you will apply company product to customers' landscaping according to schedule and as needed based on service requests. This is a Seasonal Position ESSENTIAL DUTIES AND RESPONSIBILITIES: Apply pesticides to landscaping according to schedule, safety procedures and label instructions. Identify sources of client pest issues, and practice tactics in source reduction Safely drive company vehicle to clients' houses or places of business. Call clients to confirm scheduled services. Complete required production forms. Maintain vehicle and equipment in clean and proper operating condition. May assist in sales to current clients. Expertly answer frequently asked client questions. Other duties as assigned. Qualifications QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty to satisfaction. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to lift a minimum of 60 lbs Must have a valid driver's license with good driving record Must have reliable transportation to and from work Must have a positive service attitude AVAILABILITY: Looking for both full-flex and partial availability LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to clients, and other employees of the organization. CERTIFICATES, LICENSES, REGISTRATIONS: Licenses/certificates as required by federal, state, or local regulation. Training for licenses/certification will be provided as needed. Certified Pesticide Applicators encouraged to apply Additional Information All your information will be kept confidential according to EEO guidelines.

Controls Technician - Allentown, PA - Controls-Only Company BAS Controls Technician RESPONSIBILITIES: Well versed in troubleshooting controls BAS systems Knowledge of controls programming and experience rewriting sequences Fundamental understanding installing and testing building automation systems Strong understanding of commissioning protocols and point to point check outs Work closely with controls installations and start up/termination of equipment and programs Troubleshoot and manipulate current installed BAS programs Communicate efficiently with building owners as well as end users, and general contractors Ability to work in a team environment COMPANY INFO: Founded over 10 years ago Over 25 employees Clients include Lab/Pharma/Critical Environment, Government/Municipalities, Industrial Complexes, Healthcare Facilities, Commercial Buildings, K-12, Colleges/Universities Work/Services: Service Projects, Retrofits, and new construction OFFERED Competitive Market Compensation Company Vehicle with personal use 401k Retirement Plan Fantastic Benefits Package: Medical, Dental, and Vision Vacation & Holiday time Opportunity to work with multiple technologies

Why join us? Knoll uses modern design to connect people to their work, their lives, their world. Since 1938, we have been recognized internationally for creating workplace and residential furnishings that inspire, evolve, and endure. Our purpose is design for the good of humankind. It's the ideal we strive toward each day in everything we do. Being a part of Knoll means being a part of something larger than your work team, or even your brand. We are redefining modern for the 21st century. And our success allows Knoll to support causes that align with our values, so we can build a more sustainable, equitable, and beautiful future for everyone. POSITION PROFILE The Controls Technician position is responsible for performing highly diversified duties with minimal supervision from safely creating/modifying PLC programs to assisting with production equipment troubleshooting, repairing, and maintaining in order to support the achievement of MillerKnoll's business goals and objectives. This position is under the direction of the Maintenance Manager. ESSENTIAL FUNCTIONS Collaborates with site production, maintenance, and engineering teams and/or OEM technical support to assist with troubleshooting and projects. Upgrades/configures PLC software/hardware including related basic electrical modifications. Develops/Modifies PLC programs on equipment used for manufacturing processes which includes the creation/modification of electrical and/or ladder logic drawings. Participates in equipment commissioning and start-up activities including the confirmation of safety system functionality, loop verification, and debugging. Works with plant equipment such as, but not limited to, hydraulic/pneumatic equipment (cylinders, valves, controls, & sensors), conveyor systems, part fixtures, servo drives/motors, electrical motors, safety sensors, motion controls, and sewing/textile equipment. Ensures compliance with National Electrical Code (NEC), NFPA 70E, and MillerKnoll standards. Utilizes proper lockout/tagout and arc flash, procedures to maintain a safe environment while following EHS/regulatory procedures. Performs all their duties in an open and objective manner, utilizing a “best practice” mindset to drive continuous improvement in all job-related functions. Follows and promotes GMPs and other quality programs related to the manufacturing processes. Required to work other assigned shifts as to meet business needs. Performs other duties as required. QUALIFICATIONS Able to read, understand, and utilize mechanical, hydraulic, pneumatic, and electrical drawings/schematics. Possesses interpersonal skills with the ability to build relationships within the team, the organization, and vendors. Possesses a high level of urgency and can work with minimal supervision in a fast paced and demanding manufacturing environment. Possesses self-motivation with the ability to manage multiple high priority deliverables in parallel while also attending to reactive production, maintenance, and/or engineering requests. Has excellent verbal and written communication skills in order to communicate with all levels within the organization and outside of the organization. Understands and utilizes Microsoft Windows, Outlook, Word, and Excel. Has experience with high and low voltage power distribution systems such as variable frequency drives, servo motors, motor starters, solenoids, heater controls, safety controls, and other typical control components. Possesses the ability to utilize Rockwell software, in particularly CCW, Studio 5000, FactoryTalk, and RSLogix 500/5000. Possesses the ability to create, modify, and troubleshoot basic programs with structured text and ladder logic. Proficient with LOTO & Arc Flash requirements MINIMUM QUALIFICATIONS Possesses a certificate or degree in a controls related discipline or 2 years of controls related experience. Has 1-2 years of automated manufacturing experience with developing basic PLC programs for manufacturing processes or similar applications with the ability to work in a team setting. PREFERRED QUALIFICATIONS Possesses a Bachelor's Degree in Electrical Engineering, or an engineering related discipline with 2 years of automated manufacturing experience. Understands Continuous Improvements and lean methodology and implements/utilizes lean philosophies/techniques. Has knowledge of field bus protocols such as Ethernet I/P, Profibus, Modbus, or equivalent. Has used Root Cause analysis methodology. Has conveyor system experience. Familiar with CMMS for project/work order tracking (Maximo a plus). PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Must be able to perform all essential functions of the position with or without accommodations. Who We Hire? Simply put, we hire qualified applicants representing a wide range of backgrounds and abilities. Knoll is comprised of people of all abilities, gender identities and expressions, ages, ethnicities, sexual orientations, veterans from every branch of military service, and more. Here, you can bring your whole self to work. We're committed to equal opportunity employment, including veterans and people with disabilities. This organization participates in E-Verify Employment Eligibility Verification. In general, MillerKnoll positions are closed within 45 days and are open for applications for a minimum of 5 days. We encourage our prospective candidates to submit their application(s) expediently so as not to miss out on our opportunities. We frequently post new opportunities and encourage prospective candidates to check back often for new postings. MillerKnoll complies with applicable disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact MillerKnoll Talent Acquisition at careers_********************.

Why join us? Knoll uses modern design to connect people to their work, their lives, their world. Since 1938, we have been recognized internationally for creating workplace and residential furnishings that inspire, evolve, and endure. Our purpose is design for the good of humankind. It's the ideal we strive toward each day in everything we do. Being a part of Knoll means being a part of something larger than your work team, or even your brand. We are redefining modern for the 21st century. And our success allows Knoll to support causes that align with our values, so we can build a more sustainable, equitable, and beautiful future for everyone. POSITION PROFILE The Controls Technician position is responsible for performing highly diversified duties with minimal supervision from safely creating/modifying PLC programs to assisting with production equipment troubleshooting, repairing, and maintaining in order to support the achievement of MillerKnoll's business goals and objectives. This position is under the direction of the Maintenance Manager. ESSENTIAL FUNCTIONS * Collaborates with site production, maintenance, and engineering teams and/or OEM technical support to assist with troubleshooting and projects. * Upgrades/configures PLC software/hardware including related basic electrical modifications. * Develops/Modifies PLC programs on equipment used for manufacturing processes which includes the creation/modification of electrical and/or ladder logic drawings. * Participates in equipment commissioning and start-up activities including the confirmation of safety system functionality, loop verification, and debugging. * Works with plant equipment such as, but not limited to, hydraulic/pneumatic equipment (cylinders, valves, controls, & sensors), conveyor systems, part fixtures, servo drives/motors, electrical motors, safety sensors, motion controls, and sewing/textile equipment. * Ensures compliance with National Electrical Code (NEC), NFPA 70E, and MillerKnoll standards. * Utilizes proper lockout/tagout and arc flash, procedures to maintain a safe environment while following EHS/regulatory procedures. * Performs all their duties in an open and objective manner, utilizing a "best practice" mindset to drive continuous improvement in all job-related functions. * Follows and promotes GMPs and other quality programs related to the manufacturing processes. * Required to work other assigned shifts as to meet business needs. * Performs other duties as required. QUALIFICATIONS * Able to read, understand, and utilize mechanical, hydraulic, pneumatic, and electrical drawings/schematics. * Possesses interpersonal skills with the ability to build relationships within the team, the organization, and vendors. * Possesses a high level of urgency and can work with minimal supervision in a fast paced and demanding manufacturing environment. * Possesses self-motivation with the ability to manage multiple high priority deliverables in parallel while also attending to reactive production, maintenance, and/or engineering requests. * Has excellent verbal and written communication skills in order to communicate with all levels within the organization and outside of the organization. * Understands and utilizes Microsoft Windows, Outlook, Word, and Excel. * Has experience with high and low voltage power distribution systems such as variable frequency drives, servo motors, motor starters, solenoids, heater controls, safety controls, and other typical control components. * Possesses the ability to utilize Rockwell software, in particularly CCW, Studio 5000, FactoryTalk, and RSLogix 500/5000. * Possesses the ability to create, modify, and troubleshoot basic programs with structured text and ladder logic. * Proficient with LOTO & Arc Flash requirements MINIMUM QUALIFICATIONS * Possesses a certificate or degree in a controls related discipline or 2 years of controls related experience. * Has 1-2 years of automated manufacturing experience with developing basic PLC programs for manufacturing processes or similar applications with the ability to work in a team setting. PREFERRED QUALIFICATIONS * Possesses a Bachelor's Degree in Electrical Engineering, or an engineering related discipline with 2 years of automated manufacturing experience. * Understands Continuous Improvements and lean methodology and implements/utilizes lean philosophies/techniques. * Has knowledge of field bus protocols such as Ethernet I/P, Profibus, Modbus, or equivalent. * Has used Root Cause analysis methodology. * Has conveyor system experience. * Familiar with CMMS for project/work order tracking (Maximo a plus). PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Must be able to perform all essential functions of the position with or without accommodations. Who We Hire? Simply put, we hire qualified applicants representing a wide range of backgrounds and abilities. Knoll is comprised of people of all abilities, gender identities and expressions, ages, ethnicities, sexual orientations, veterans from every branch of military service, and more. Here, you can bring your whole self to work. We're committed to equal opportunity employment, including veterans and people with disabilities. This organization participates in E-Verify Employment Eligibility Verification. In general, MillerKnoll positions are closed within 45 days and are open for applications for a minimum of 5 days. We encourage our prospective candidates to submit their application(s) expediently so as not to miss out on our opportunities. We frequently post new opportunities and encourage prospective candidates to check back often for new postings. MillerKnoll complies with applicable disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact MillerKnoll Talent Acquisition at careers_********************.

Job Description Automation Technician - Medical Device As our company continues to grow, we're excited to introduce a new opportunity for an Automation Technician to help drive the next phase of our manufacturing innovation. In this role, you'll be part of a forward-thinking team focused on developing and implementing automation solutions that boost efficiency, quality, and consistency across production. If you're passionate about technology, hands-on problem-solving, and shaping modern manufacturing processes, this is an excellent chance to make a meaningful impact. Overview of the Role The Automation Technician will be instrumental in building and advancing our automation capabilities for manufacturing equipment. You'll design, install, and maintain automated systems that improve performance and reliability while supporting the development of new automation processes from the ground up. This role offers the opportunity to work with cutting-edge technologies in electrical controls, pneumatics, and mechanical systems and to play a key role in helping our organization transition toward a more automated and efficient future. Who You'll Work With You will report to the Manufacturing Manager while working closely with engineers and cross-functional teams. Major Accountabilities: Tests, adjusts, installs, operates, maintains, and inspects computerized systems, robotic devices, control systems, and manufacturing equipment and workstation installations, using skills in electronics, fluid power, mechanics, and manufacturing processes. Monitor and perform routine diagnostic checks, troubleshoots problems, and repairs found issues in automation equipment/control panels to minimize production downtime and maximize efficiency. Perform routine inspections and preventive maintenance on equipment systems and electrical components. Duties and Responsibilities Sets up and conducts tests of complete units and components under operational conditions to investigate design proposals for improving equipment performance or to obtain data for development, standardization, and quality control. Devises, fabricates, and assembles new or modified mechanical components or assemblies for products, such as industrial equipment and machinery, power equipment, machine tools, and measuring equipment. Document all maintenance activities, repairs, system changes, and troubleshooting procedures accurately. Collaborates with Engineering and Manufacturing teams to implement automation solutions that enhance system reliability and performance. Collaborate with Engineering and Manufacturing teams to support equipment upgrades, preventive maintenance, and process improvements. Ensure compliance with safety standards and electrical codes during all phases of work. Qualifications Associate's degree or technical diploma in Electromechanical Engineering Technology, Industrial Automation, or related field. 3-5 years of related experience and/or training; or equivalent combination of education and experience. Strong knowledge of electrical controls (Siemens), ladder logic programming, and control panel wiring. Hands-on experience with pneumatics and mechanical systems integration. Who We Are & What We Do Boehringer Laboratories, LLC is a US based Medica Device Manufacturer with it's Corporate Headquarters located in Phoenixville, PA. We serve the Acute Care Hospital Market in the US and across the Globe. We have strong product lines in Minimally Invasive Surgery and the Medical Gas spaces. We have a continuous process to grow the company by finding novel devices that improve patient care. We seek to make world-class products that improve patients' lives. We are dedicated to improving our skills to serve our customers, community, and each other. We are a team of professionals passionate in our work. Our Mission: Caring for Lives through Innovation, Quality, and Service. To learn more about our company, visit ********************** . We provide an environment that fosters professional growth while offering an excellent wage and benefits package, including a 401(k) with employer match.

DIRECT HIRE MACHINIST/AUTOMATION TECHNICIAN OPPORTUNITY! This position is responsible for the assembly, debugging, troubleshooting, maintenance, and repair of automated equipment, fixtures and tools. Key Responsibilities Include: Assemble in-house-manufactured automated equipment, fixtures and tools, including mechanical assemblies, machine frames, safety guarding, and pneumatic systems. Route pneumatic tubing and electrical wiring Conceptualize and fabricate set-up tools, jigs, and fixtures to assist with machine set-up Fabricate machine guarding and framing from aluminum extrusion, polycarbonate sheet, and sheet metal guarding Perform mechanical debugging on in-house equipment, including making adjustments to settings and set-up Troubleshoot, repair, and service equipment located at customer's facilities Qualifications: Minimum of 2 years of experience working with complex mechanical assemblies, mechanisms, or other systems, including experience working with: Bearings, cams, linkages, pneumatic systems, ball screws, sensors, dies, and other manufacturing equipment-related components. Minimum of 5 years of machining experience; CAM and/or conversational programming experience preferred Certificates and/or training in mechanical assembly, tool making, or machining a plus Problem solving of mechanical systems Tool and Die experience a strong plus Gage is a trusted professional recruiting firm with over 40 years of experience, connecting top talent with career opportunities in multiple sectors. With a people-first approach, Gage empowers and connects employers and candidates across multiple industries, including finance, accounting, administrative, manufacturing, skilled trades, and more. Gage specializes in direct-hire skilled and professional placements, as well as contract jobs, internships and temporary roles with local, national and global employers. Gage is an equal opportunity employer headquartered in Reading, Pennsylvania. #TalentAcquisition #SearchSolutions #StaffingSolutions #JobOpportunities #HiringNow #Jobs #JobSearch #CareerGrowth #WorkWithUs #Recruitment #NowHiring #CareerOpportunities #WorkforceSolutions #GageTalent #GageCareers #GreaterReading #Reading #Lancaster #Philadelphia #Pennsylvania #USA #WomanOwned #GageTalentNetwork

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

Full-time Description The Electrical/Controls Technician is responsible for maintenance, proper operation, and troubleshooting of all mechanical and electrical systems on production and support equipment. Essential Duties and Responsibilities: Support and manage all control components within a PLC system. Perform maintenance activities within a manufacturing environment on production and support equipment. Incorporates LOTO procedures as required by policy. Dismantles devices to gain access to impacted areas and repair/remove defective parts. Determines, by use of regular inspections, the repair and maintenance work necessary to prevent breakdowns. Inspects used parts to determine changes in dimensional requirements if the parts are reusable, and what parts, if any need to be ordered. Adjusts functional parts of devices and control instruments not performed by machine operators to ensure proper operation. Repairs electrical equipment within the limitations of expertise and training. Sets up and operates lathe, drill press, grinder, and other tools to make and repair parts. Removes tools and cleans impacted work areas upon completion of work. Initiates purchase orders for parts and machines. Makes recommendations concerning equipment and/or procedure modifications. Locates and sets production machinery as required by production schedule. Performs and assures all duties are carried out in a safe and conscientious manner. Maintains a positive attitude when interacting with Asher's team members and customers. Performs other job-related duties in area of responsibility as assigned. Requirements Work Environment/ Physical Demands: Employee must be willing to be frequently exposed to moving mechanical parts, wet or humid weather conditions, high precarious places, fumes or airborne particulates, toxic or caustic chemicals, outside weather conditions, high frequency vibrations, and noise levels requiring hearing conservation protection. Frequently required to stand, walk, and reach with hands and arms for an 8-hour shift. Employees must frequently lift and/ or move up to 35 pounds without the aid of material handling equipment. Accountabilities: Responsible Maintenance Manager A. Report problems that cannot be resolved immediately Qualifications: Ability to read, write, and communicate in English Must have experience in a high-speed manufacturing environment Supervisory Responsibilities: None Education: Must have a High School Diploma or GED equivalent Experience: Needs to have acquired 1-3 years related experience and/ or training. Equivalent combination of education and experience preferred Must have working knowledge of PLC Systems and associated software & ability to trouble-shoot controls and low voltage systems Knowledge and Skills: Basic knowledge of the following: three phase electrical systems, welding and machine shop practices, HVAC systems, plumbing and pneumatics, conveyors and conveying systems, and ability to read and complete preventative maintenances as assigned Mechanical and standard electrical skills Travel Requirements: None This is intended to convey essential information to understand the scope of the job, the general nature, and level of work performed by job holders. This job description isn't an exhaustive list of qualifications, skills, efforts, duties, responsibilities, or working conditions, which may be changed from time to time based upon business needs.

Position Type: Full-Time, Hourly We are seeking an Electrical Lead with strong commercial experience and at least a third-year apprenticeship level. Industrial experience is a plus but not required. This is a hands-on leadership role focused on quality, safety, and mentoringnot just routine tasks. The Electrical Lead will support the Foreman by providing technical expertise, guiding apprentices, and ensuring compliance with standards. Key Responsibilities Serve as the on-site technical resource for electrical installations and troubleshooting. Assist in planning and executing commercial electrical projects with precision. Mentor apprentices and junior electricians to develop technical skills. Ensure all work meets NEC, OSHA, and company standards. Collaborate with other trades and assist the Foreman in resolving issues. Maintain tools, equipment, and material readiness for efficient workflow. Requirements: Qualifications Minimum: 3rd-year electrical apprentice with proven commercial experience. Journeyman's License is a plus. Industrial experience is a plus, but not required. Ability to read and interpret blueprints; familiarity with wiring schematics is a strong advantage. Solid understanding of commercial electrical systems and safety practices. Strong communication skills and a team-oriented mindset. Compensation details: 23-27 Hourly Wage PIe612bf2164b3-31181-39250907

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, American Heart Association, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 11,000 strong organization as we fuel the world and each other Summary: Under general supervision of the Supervisor, the Instrument Technician carries out assigned tasks to repair, install, troubleshoot, and perform other predictive and preventative maintenance on electronic and control equipment and associated devices. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Must have ability to carry out assigned preventive maintenance duties and installation assignments of electronic and control equipment and recommend remedial maintenance as required * Must have ability to perform periodic and emergency overhauls and reconditioning of equipment including, but not limited to: remote transmitter units, controller, product identification devices, uninterruptible power supplies, tank alarm, programmable logic controllers, fire detectors, temperature monitors, vibration monitors, line finders, regulated power supplies, frequency to D.C. converters, metering circuits, pressure and temperature transmitters, including totalizers, 24VDC and 120VAC relay logic panels, water well controls, timers and counters, flashpoint detection equipment, vapor detectors, assorted panel meters, electronic tools and test equipment, control valves, instrumentation, control and supervisory equipment. * Must have working knowledge of Windows PC operating system, flow meters, Rockwell/Honeywell control systems, analyzers, various densitometers, VFD's & Motor Control circuitry. * Must use and operate all pertinent safety equipment when performing duties in potentially hazardous areas (respirator, hard hat, safety glasses, etc.). * Must be computer literate with basic skills in Windows, MS Word, and Internet use. * Must be able to interpret, install and troubleshoot instrumentation in accordance with basic PID and electrical/electronic schematics, and make modifications/corrections to the noted schematic. * Must be able to perform the routine testing and logging of pipeline safety checks as required by D.O.T. regulations using appropriate tools * Incumbent normally works alone but at times is required to coordinate his/her work activities with other technicians to make repairs to electronic instrumentation and RTU equipment. * May be requested to inspect or oversee the work of contract employees in the installation or maintenance of electronic instrumentation equipment. * Must be able to: investigate and diagnose reported difficulties; make repairs and adjustments and restore equipment and facilities to proper operation. Must be able to use various test equipment, measuring devices, hand and power tools and gauges related to the electronic instrumentation field. * As assigned, assists technicians in other disciplines with routine maintenance, repair and installation. In absence of appropriate craftsman, may be required to diagnose problems other than instrumentation in nature and perform minor repairs, informing appropriate supervision. * Responsible to help maintain safe and healthful working conditions by exercising sound judgment, complying with all industry safety regulations and standards, and keep current with changing industry regulation and standards. Special Considerations: * Must reside within 45 miles of reporting location. The described job duties are a framework in which work will be assigned. This description is not inclusive of all responsibilities or job assignments. This position will require extended off hour duties at times. Requirements: Education and/or Experience, Knowledge, Skills & Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements for this position are listed below: * Must have a minimum of Associate's degree in Electronic Technology or equivalent instrument experience. * Must maintain valid driver's license for the state of residence. * Must be able to climb tanks and be able to work out of doors in extreme weather and perform heavy physical labor including lifting of up to 50 pounds in a safe manner. * Must be able to obtain a Federal Government issued TWIC card. * Professional verbal & written communications skills and be capable of effectively interfacing with all levels of management, field personnel, and professionals. * Must be able to use sound judgment, be a self-starter and well organized. * Proficiency utilizing MS Applications. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Lifting up to 50 lbs. occasionally * Driving, walking, and standing frequently * Exposure to adverse weather * Visits to industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Occasional overnight travel may be required

Service 360 Group is currently seeking a full-time Commercial Electrical Technician to join our team in Reading, PA. If you have strong experience in commercial electrical work and are looking for a stable, rewarding opportunity as an electrician with a respected company, we encourage you to apply today! PAY: $75,000-$85,000 per year BENEFITS: Performance bonus program Paid healthcare coverage Paid vacation and holidays Cell phone allowance 401(k) with company match QUALIFICATIONS 5+ years of experience in the electrical trade Commercial Construction experience A high school diploma or equivalent Excellent organizational skills An Electrical Journeyman or Master's License and experience in Design Build projects are preferred. SCHEDULE: This is a full-time electrician position, working Monday through Friday, 7:00 AM to 4:00 PM. Keep reading to learn more about joining our growing team of electricians! WHAT TO EXPECT AS A COMMERCIAL ELECTRICAL TECHNICIAN In this position, you'll perform electrical installations, maintenance, and repairs in compliance with NEC standards. Your day will include reading blueprints, installing conduit, troubleshooting systems, upgrading components, and collaborating with other trades. You'll help ensure job site safety and organization while delivering high-quality results. We're proud of the culture we've built, and everything we do is rooted in our values. If you want to become our Commercial Electrical Technician, you'll need to align with the following: Thoughtfulness - We approach every project with care and attention Respect - We treat our team members and clients with professionalism and courtesy Integrity - We do what's right, every time Professionalism - We uphold the highest standards in our work Loyalty - We are dedicated to our team, our clients, and our community ABOUT SERVICE 360 GROUP We are a full-service contracting company committed to professionalism and quality in every project. Our clients receive exceptional service, integrity, and reliability, helping us maintain our status as a top provider in the area. We foster a supportive work environment where our team works together to achieve goals, guided by our core values of thoughtfulness, respect, integrity, professionalism, and loyalty. We seek dedicated individuals who are passionate about quality workmanship and, in return, offer a positive workplace with competitive pay and great benefits. HOW TO APPLY Join a company that values your expertise and supports your growth. Apply today! Our initial application process is quick, easy, and mobile-friendly.

Why Great Northern Established in 1962, Great Northern is a local, privately owned paper-based packaging manufacturer with a long history of providing secure, stable, and meaningful positions. You will experience a collaborative team-first, safe, clean, enjoyable, and predictable workplace where team members support and care for one another. Our team members produce sustainable and Eco-friendly products that are supplied to national brands that impact people's day-to-day lives. Great Northern is committed to making a difference in the lives of our team members, customers, and the communities in which we live and work. Many of our team members were referred by their friends and families who are already a part of the Great Northern team. We are currently looking for a full-time Electromechanical Technician for our Allentown, PA plant. POSITION SUMMARY Responsible for electro-mechanical repairs, maintenance and preventative maintenance to all production and facility equipment in addition to installation of said equipment in the plant, warehouse, and office areas by performing the following duties. Electro-mechanical skill set is required. ESSENTIAL DUTIES AND RESPONSIBILITIES INCLUDE THE FOLLOWING. OTHER DUTIES MAY BE ASSIGNED. Ensure the operational viability of the plant by evaluating and maintaining the proper functioning of all electrical, instrumentation, and control systems. Involvement with process instrumentation and automation equipment specifying and selecting control equipment to maximize automation efforts. Maintain proper documentation of electrical, instrumentation and automation systems and keep files up to date including process instrumentation diagrams, block diagrams, and drawings. Hands on experience with PLC/DCS and HMI architecture to aid in troubleshooting Performs ladder logic programming and troubleshooting for PLC's. Knowledge of AC/DC circuits, motors and drives. Determines the existence of electrical hazards and problems. Safely isolate, ground, and prepare circuits for electrical apparatus for repairs. Perform preventative maintenance such as changing contacts, checking motors, and the operation of automated and robotic systems. Adheres and actively participate in lock out/tag out practices and procedures. Keeps all documentation up to date of lock out/tag out and works with Safety Director to maintain safe practices. Assists Operations Manager, supervisors, and maintenance lead with the operation of the predictive and preventative maintenance program. Inspects and ensures that all operating machines and equipment conform to electrical and mechanical operational quality standards. Requisitions tools, electrical test equipment and maintenance supplies required for plant operation. Confers with plant manager, production manager, supervisors, and other appropriate personnel to resolve maintenance problems and recommends measures to improve operations and conditions of machines, equipment and processes. Keeps maintenance area neat, clean and orderly; cleans up after completing maintenance work throughout the plant. Records and files complete machine histories relating to maintenance problems and cures, troubleshooting methods, services required, spare parts and parts vendors. Regular and reliable attendance. ADDITIONAL RESPONSIBILITIES Knows, understands and follows all plant safety rules, general rules and procedures. Remains current on changes in policies, procedures, and product information, attending authorized training programs and seminars. Be available for monthly safety meetings, on-call and overtime work. Annual, semi- annual, quarterly, monthly, weekly & daily Inspections. Manage & distribute Maintenance PO numbers. Misc. Duties as assigned Opportunities for Growth You will have the opportunity to learn new skills and acquire new knowledge that can be applied to grow into new positions with higher pay. Salary Dependent on prior experience, starting wage between $35.00/hour to $37.00/hour. Expectation To be successful your teammates will depend on you to have pride in your work, be on time, work safely, work effectively with others, be optimistic, take ownership of your responsibilities, and look for continuous improvement opportunities.

Full-time Description Summary of Position The Maintenance Electromechanical Technician is responsible for inspecting, maintaining, and repairing manufacturing equipment, property, and facilities to ensure safe, reliable, and efficient plant operations. This role plays a key part in minimizing downtime, supporting continuous improvement initiatives, and ensuring all maintenance activities comply with company safety, environmental, and quality standards. Key Responsibilities · Perform routine and preventive maintenance on machinery, equipment, and building systems according to established schedules and SOPs. · Diagnose mechanical, electrical, hydraulic, and pneumatic issues; perform corrective repairs and recommend long-term solutions. · Conduct inspections and document results and work orders in the Maintenance Management System (CMMS). · Collaborate with production and engineering teams to coordinate repairs and minimize operational disruptions. · Safely operate company tools and vehicles, including forklifts, telehandlers, and lifts. · Support installation, fabrication, and modification of new or existing equipment, including welding and pipefitting. · Maintain accurate maintenance records, logs, and inventory of spare parts and tools. · Participate in training, safety programs, and continuous skill development to stay current with new technologies and maintenance practices. · Install, calibrate, and maintain electro-mechanical systems, including motors, drives, sensors, and control units. · Diagnose and troubleshoot electrical and mechanical faults in automated equipment. · Interpret technical schematics, wiring diagrams, and mechanical blueprints. · Work with PLCs to troubleshoot or reset automation systems. · Use measurement and diagnostic tools (e.g., multimeters, oscilloscopes, calipers). · Replace and align mechanical components such as belts, gears, and actuators. Requirements Required Qualifications · High School Diploma or GED required. · Minimum 3 years of industrial or manufacturing maintenance experience. · Proficiency with mechanical systems, welding (MIG/TIG/stick), fabrication, and machining. · Familiarity with Maintenance Management Software (e.g., MaintainX, SAP, or similar). · Ability to read blueprints, schematics, and technical manuals. · Valid driver's license and ability to operate heavy equipment (forklift, scissor lift, etc.). · Ability to work at heights up to 70 ft and in confined spaces. · Basic computer skills (MS Word, Excel); strong attention to detail and safety. · Experience with 480V/3-phase power and basic electrical troubleshooting. · Overhead crane, hydraulic/pneumatic system, and pipe installation experience. · Proficiency in electrical diagnostics and mechanical assembly. · Familiarity with PLCs (e.g., Allen-Bradley, Siemens), motor controllers, and sensors. · Skilled in using testing equipment and mechanical hand tools. · Knowledge of safety procedures and basic electrical code compliance. · Strong analytical and troubleshooting ability. · Clear communication with cross-functional teams. · Adaptability in fast-paced or high-volume environments. · Time management and ability to prioritize tasks independently. Preferred Qualifications Technical or vocational training. 5+ years of industrial or manufacturing maintenance experience. Salary Description $30 - $42 per hour

I&E Technician-25001500 Description Job Summary:Linde is seeking a skilled and motivated Instrumentation and Electrical (I/E) Technician to join our team in Hatfield, PA. This role reports to the Plant Manager and works closely with the Lead Tech. As an I/E Technician, you'll play a critical role in ensuring the safe, reliable, and efficient operation of our Air Separation Plant. If you enjoy troubleshooting, working with advanced systems, and making an impact every day, this is the opportunity for you! Key Responsibilities Include:Perform calibrations, troubleshooting, repairs, maintenance, and installation of industrial instruments including transmitters, PLC systems, meters, automatic valves, and product purity analyzers. Maintain and troubleshoot electrical systems and equipment including Motors, UPS systems, Breakers, and Transformers. Troubleshoot, maintain, and repair electrical systems up to 600V. Demonstrate a good understanding of Allen Bradley PLCs. Interpret and maintain P&IDs and schematic wiring diagrams in compliance with established SOPs, QA, and MOC policies. Complete and document preventative maintenance activities in compliance with established instrumentation, maintenance, and QA programs. Perform purity analyzer routine calibration. Prepare and maintain all assigned PM work orders, Procal, and analyzer calibration logs. Plan and execute instrumentation functional testing in compliance with established procedures. Prepare and execute projects to improve facility availability and reliability. Through training, become proficient in operating the Hatfield plant including startup, shutdown, and process troubleshooting. Maintain critical spare parts inventory to minimize plant downtime for unplanned equipment failures. Assist in plant outage planning with regional support. Coordinate and schedule contractor activities when required for areas of responsibility. Prioritize personnel safety throughout all work within assigned scope. Be on call on a rotation with the other plant technicians - 1 week per month. Occasionally work OT as required by business demands. Available off hours via cell phone to support other plant technicians with instrumentation and electrical troubleshooting. Qualifications Qualifications:High School Diploma or equivalent. 2 years related experience in process control instrumentation. Proficient with a variety of I/E hand tools, meters, instrument calibration equipment, etc. Working knowledge of electricity, AC/DC theory, electrical distribution systems, and motors. Ability to read and understand P&IDs and schematic wiring diagrams. Working knowledge of calibrating pressure, temperature, and differential switches or transmitters. Knowledge of control valves and actuators (Fisher, Neles-Jamesbury, Samson, Masoneilen). Strong organization and planning skills. Strong basic computer skills. Written and oral communication skills. Ability to work in both office and field environments. Ability to perform elevated work via ladders, scaffolding, and man-lifts. Ability to excel in both a team and individual work capacity. Available on-call on a rotation (24/7 one week per month) with ability to arrive at the facility within 1 hour if required. Available periodically to work OT as required by business demands. Available off hours via cell phone to support other plant technicians with instrumentation and electrical troubleshooting. Preferred Qualifications:Associate in applied sciences degree, technical school, or equivalent apprenticeship. Experience in Air Separation plants or similar field. Understanding of regulatory standards and codes. Experience in purity analyzer calibration. About Linde:Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture:At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit www. linde. com. Benefits:Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-PL1Primary Location Pennsylvania-SoudertonSchedule Full-time Job - OperationsUnposting Date Ongoing

Primary responsibilities include operations support in setup, maintenance, and operation of high-speed automatic packaging equipment. Electromechanical troubleshooting skills are required to effectively support and assist in the maintenance and operation of automated packaging equipment. Maintains a cGMP production environment and standards throughout the production area(s). Adheres to workplace environmental, health and safety (EHS) guidelines and procedures while actively promoting and enforcing adherence. Essential Duties will require a close-knit integration with various departments including Operations and Quality. ESSENTIAL DUTIES AND RESPONSIBILITES: Troubleshoot, diagnose, and repair machine breakdowns in collaboration with maintenance and engineering teams. Operate packaging equipment to support daily operational activities. Assist in training and developing new machine operators and mechanics. Record data into process check sheets. Troubleshoot and adjust sensors, online printing, barcode scanning, and OCR/OCV vision equipment. Verify the calibration status of measurement gauges, including temperature controllers, thermocouples, air and vacuum gauges, and timers. Performs Preventative and On Demand Maintenance activities, including calibration of packaging equipment, overseeing OEM support and calibration specialist personnel, and appropriately documents all activities per Sharps procedures. Maintain daily correspondence with team members and attend meetings when required. Complete preventive maintenance and on-demand work orders, logging them in the Blue Mountain system. Work hours may vary depending on business needs. Provides advanced troubleshooting including sensors, setup and adjustment of online printing, barcode scanning, and OCR/OCV vision equipment. PLC Knowledge and basic programming in structured text and ladder logic to aid in troubleshooting and diagnosis. Advanced electrical troubleshooting including controls, servos, robotics, and medium voltage control systems. Communicates complex technical issues and troubleshooting strategies both internally and externally. SUPERVISORY RESPONSIBILITIES None QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Windows Word, Excel, Outlook, and general PC literacy are essential. EDUCATION and/or EXPERIENCE: High school diploma 4 years of industrial automation/packaging experience. A strong desire to learn new systems and expand individual knowledgebase is mandatory. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to troubleshoot issues under high demand situations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to stand, walk, reach with hands and arms, and climb or balance. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 10 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environmental characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to the risk of electrical shock. The employee is occasionally exposed to fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate.

PRIMARY PURPOSE: To maintain all mall owned and operated heating, ventilation and air conditioning equipment in order to provide safe, efficient and effective operation. This position is on call 24 hours per day, 7 days per week to assist the operations department in handling emergencies at the property level. PRINCIPAL RESPONSIBILITIES: The successful candidate's responsibilities will include, but not be limited to: Work in cooperation with other contracted mechanical services as retained by management. Report all situations requiring emergency and/or immediate action to the appropriate personnel. Troubleshoot various systems including plumbing, electrical, heating, air conditioning, refrigeration, and other systems as required to determine source of malfunction and repair. Conduct scheduled inspections and preventive maintenance to designated equipment; make adjustments to equipment and controls to ensure operations are in compliance with specifications and/or standards. Install, maintain and make repairs to electrical, plumbing, heating, air conditioning, and refrigeration equipment as needed. Perform the job in accordance with all applicable standards, policies and regulatory guidelines (i.e. EPA, OSHA standards) to promote a safe working environment. Administer compliance of local, state, and federal laws pertaining to areas such as fire, safety, hazardous material, access etc. Observe operation, read gauges and instruments, and adjust mechanisms such as valves, controls and pumps to control level of fluid, pressure and temperature. Provide routine services to include preventive maintenance on air side and water side equipment, identifying, installing, maintaining and disposing of all types of filters, cleaning mechanical/transformer rooms, picking up and delivering parts, and assisting higher level heating, ventilation, air conditioning and refrigeration mechanics and or contracted services. Schedule preventative maintenance programs as assigned by management. Coordinate work orders and maintain the integrity of the Work Order System. Ensure the appropriate inventory systems, records, files, Material Safety Data Sheets, supplies, equipment and tools are maintained. Replace defective breaker controls, thermostats, switches, lighting components, fuses and basic electrical wiring, etc. Employee may be directed to perform job-related tasks other than those specifically presented in this description. REQUIRED SKILLS: Self-starter with ability to work independently. Familiarity with air handler units to include efficient operation required to achieve energy savings and acceptable comfort levels. Knowledge in filter identification and application, equipment and component identification, safety procedures, refrigeration cycle and soft soldering. Knowledge of cooling tower operation & start-up and package roof top HVAC units. Knowledge of condenser and chilled water systems and water treatment. Capability to diagnoses problems on equipment. Ability to disassemble, clean, lubricate, repair and replace parts, as required. Able to diagnose basic malfunctioning mechanical systems, test components; trouble shoot and repair replace or adjust defective or worn parts. Able to operate and program Building Automation Systems and Energy Management Systems as they relate to energy savings, life safety, seasonal adjustments and company standards. Knowledge of safety rules, hazards and application of accident prevention measures associated with the operation of mechanical and HVAC equipment. Ability to work rotating shifts, which may include days, evenings, weekends and holidays. MINIMUM QUALIFICATIONS: High School Diploma or Trade School Certificate. 3 - 5 years' experience in the HVAC maintenance field (Related education may be substituted for up to two years' experience on a year-for-year basis) Valid Driver's license EPA Certification

Job Description is responsible for the repair, modification, and change parts on electronic units Shift - Monday thru Friday 6am - 2pm EST Roles & Responsibilities • Analyze failed phone according to established methods and procedures • Resolve technical issues within time schedule and provide the break and fix solution using OEM standard • Able to dis-assemble and re-assemble Cell Phone into a good cosmetic housing • Able to remove LCD from back-housing and replace them with a new one • Able to remove mother-board and battery • Able to replace screws and make component replacements • Must be flexible to do other assigned responsibility depending on where need Essential Skills and Experience: • ESD knowledge from previous job and ability to pass ESD exam • Complete understanding of phone components • Must be detail oriented with quality assurance focus in order to deliver quality repairs • Must have basic trouble shooting skills-Must have Rework experience of cell phones • Must have basic computer skills and able to document repairs done of the cell phones • Ability and availability to work irregular or extended hours including nights, weekends and potentially holidays as needed by the customer Minimum Qualifications Ability to operate test equipment. Ability to read some schematics. Good manual dexterity. Possess soldering and de-soldering skills is a plus Excellent analytical skills. Excellent attention to detail. Must be able to perform both surface mount and thru-hole soldering techniques, as well as operate automated repair equipment (BGA machine). Computer skills are a must for accurate data entry of completed units. Required Skills Soldering electronic schematics Work Authorization Green Card US Citizen

Description: The Electrical/Controls Technician is responsible for maintenance, proper operation, and troubleshooting of all mechanical and electrical systems on production and support equipment. Essential Duties and Responsibilities: Support and manage all control components within a PLC system. Perform maintenance activities within a manufacturing environment on production and support equipment. Incorporates LOTO procedures as required by policy. Dismantles devices to gain access to impacted areas and repair/remove defective parts. Determines, by use of regular inspections, the repair and maintenance work necessary to prevent breakdowns. Inspects used parts to determine changes in dimensional requirements if the parts are reusable, and what parts, if any need to be ordered. Adjusts functional parts of devices and control instruments not performed by machine operators to ensure proper operation. Repairs electrical equipment within the limitations of expertise and training. Sets up and operates lathe, drill press, grinder, and other tools to make and repair parts. Removes tools and cleans impacted work areas upon completion of work. Initiates purchase orders for parts and machines. Makes recommendations concerning equipment and/or procedure modifications. Locates and sets production machinery as required by production schedule. Performs and assures all duties are carried out in a safe and conscientious manner. Maintains a positive attitude when interacting with Asher's team members and customers. Performs other job-related duties in area of responsibility as assigned. Requirements: Work Environment/ Physical Demands: Employee must be willing to be frequently exposed to moving mechanical parts, wet or humid weather conditions, high precarious places, fumes or airborne particulates, toxic or caustic chemicals, outside weather conditions, high frequency vibrations, and noise levels requiring hearing conservation protection. Frequently required to stand, walk, and reach with hands and arms for an 8-hour shift. Employees must frequently lift and/ or move up to 35 pounds without the aid of material handling equipment. Accountabilities: Responsible Maintenance Manager A. Report problems that cannot be resolved immediately Qualifications: Ability to read, write, and communicate in English Must have experience in a high-speed manufacturing environment Supervisory Responsibilities: None Education: Must have a High School Diploma or GED equivalent Experience: Needs to have acquired 1-3 years related experience and/ or training. Equivalent combination of education and experience preferred Must have working knowledge of PLC Systems and associated software & ability to trouble-shoot controls and low voltage systems Knowledge and Skills: Basic knowledge of the following: three phase electrical systems, welding and machine shop practices, HVAC systems, plumbing and pneumatics, conveyors and conveying systems, and ability to read and complete preventative maintenances as assigned Mechanical and standard electrical skills Travel Requirements: None This is intended to convey essential information to understand the scope of the job, the general nature, and level of work performed by job holders. This job description isn't an exhaustive list of qualifications, skills, efforts, duties, responsibilities, or working conditions, which may be changed from time to time based upon business needs.