Controls technician jobs in Georgetown, TX - 207 jobs

Employment Type: Full-time / Permanent / Direct Hire Compensation: Up to $35/hour (equivalent to ~$72k annually, assuming no overtime) Schedule: 7:00 AM - 4:00 PM, Monday-Friday (some overtime available) Benefits: medical, dental, vision, LTD/STD, HSA/FSA, term life, and supplemental health insurances (e.g., Aflac) for all employees (and their families if needed) 6 weeks PTO 401(k) paid parental leave We're looking for a Electro Mechanical Technician to join our growing team in Cedar Park, Texas. This role is ideal for someone who thrives in a precision-driven, process-focused environment and enjoys hands-on electromechanical work. If you have experience assembling motors, stators, coils, or other high-reliability electrical/mechanical systems-and you take pride in meticulous workmanship-this could be an excellent fit. In this position, you'll perform detailed assembly, testing, and inspection of electric motor components used in next-generation power and motion systems. You'll work with stators, windings, insulation systems, wiring, and precision mechanical fixtures while following strict work instructions and quality standards. Candidates from aerospace, EV powertrain, electronics, semiconductor, circuit boards, and other high-precision manufacturing environments are strongly encouraged to apply. Requirements 3+ years of hands-on experience in electromechanical assembly, motor/coil winding, aerospace electronics, EV powertrain, semiconductor, PCB assembly, or other precision manufacturing environments. Experience performing mechanical and electrical assembly tasks such as crimping, wiring, soldering, torque tools, epoxy/potting, and use of precision fixtures. Experience with electrical testing, such as continuity, resistance, insulation checks, or hipot testing (training provided). Ability to read and follow engineering drawings, schematics, work instructions, and revision-controlled travelers/SOPs. Strong attention to detail and process discipline-must consistently follow standardized procedures without deviation. Ability to accurately record build and test data for traceability and quality assurance. Proven reliability, consistency, and strong work ethic due to the complexity and safety requirements of the products. High school diploma or equivalent. Successful completion of a background check and drug test is required. Nice-to-Haves Experience with motor, generator, actuator, or electric machine assembly. IPC-A-610 or IPC-WHMA-620 experience or certification. Experience in pilot-line or R&D environments supporting early-stage manufacturing. Familiarity with MES systems or digital travelers. Exposure to Lean/5S principles, ESD practices, or continuous improvement environments. Prior collaboration with engineering, quality, or test teams for build feedback and process refinement.

The successful applicant will be performing work in FedRAMP High or IL-5 environments, and therefore, must be a U.S. Person (i.e. U.S. citizen, U.S. national, lawful permanent resident, asylees, or refugee). This position may also perform work that the U.S. government has specified can only be performed by a U.S. citizen on U.S. soil. What You'll Do As a team member of Cisco's Advanced Security Initiatives Group (ASIG), you will evaluate our global products and services to identify security vulnerabilities, weaknesses, and improvements. You will learn to adopt an attacker mentality using tools, techniques, and processes that emulate real-world adversaries. You will work with amazingly creative, innovative, and collaborative security researchers to develop evolving ethical hacking skills and networking product knowledge. You will partner with Cisco's industry-leading engineering teams to assess the latest system and application architectures, contribute to creative security solutions, and gain unparalleled access to and experience with the latest technologies. You will also have opportunities to research security topics independently or collaboratively to explore and develop tools and ideas as part of our "Free Friday" innovation and incubation process. Who You'll Work With Our security team is dynamic, hardworking, fun, and high-energy, but the work is done in a very casual environment that strongly encourages a work/life balance. Not only will you work alongside a team of skilled security researchers with a diverse spectrum of talents and experience levels, but you will also be interacting with a variety of engineering teams across Cisco. Cisco ASIG cultivates an environment where every individual's input and experience is valued. We prioritize training sessions and a mentor program surrounding you with the resources you will need to succeed. Who You Are Would you enjoy finding security flaws in critical systems, modeling prototype attacks that malicious actors might take advantage of, and crafting mitigations to thwart motivated and inventive adversaries? If you have a passion for computer security, enjoy solving exciting problems, and relish working with emerging technologies, Cisco wants you! Global ISPs, Fortune 500 companies, and world governments all depend on Cisco for critical infrastructure, and we want to guarantee that we keep delivering highly secured solutions to meet their needs. Minimum Requirements: 6+ years of red teaming or penetration testing experience with emphasis on remote access, network penetration, Command and Control development and use, and covert channels. 4+ years of exploit development (Offensive Programming) and cloud security. Bachelor's degree or equivalent experience in Computer Science, Engineering. MS/MBA preferred. 6+ years of Unix experience, including any applicable academic experience. 6+ years of technical leadership experience in security assessments Solid understanding of Python, Go, or a similar language. Must be able to code live. Preferred Requirements: 4+ years of experience with applied crypto, through implementation or analysis of crypto algorithms. 4+ years of experience with network protocols, through implementation or analysis. 4+ years of experience as a DevOps engineer. 4+ years of security testing experience, including areas like web applications, APIs, user interfaces, mobile devices, and embedded devices. 4+ years of other full-spectrum red-team tactics, such as hw hacking, physical security breach, targeted social engineering. 4+ years of experience in a SOC, SRE, or incident response role. 4+ years of Windows administration experience. Job Requirements: Preferred sites: Knoxville, Tennessee; Austin, Texas; or Research Triangle Park, North Carolina. Willing to consider remote. Why Cisco? #WeAreCisco. We are all unique, but collectively we bring our talents to work as a team, to develop innovative technology and power a more inclusive, digital future for everyone. How do we do it? Well, for starters - with people like you! Nearly every internet connection around the world touches Cisco. We're the Internet's optimists. Our technology makes sure the data traveling at light speed across connections does so securely, yet it's not what we make but what we make happen which marks us out. We're helping those who work in the health service to connect with patients and each other; schools, colleges, and universities to teach in even the most challenging of times. We're helping businesses of all shapes and sizes to connect with their employees and customers in new ways, providing people with access to the digital skills they need and connecting the most remote parts of the world - whether through 5G, or otherwise. We tackle whatever challenges come our way. We have each other's backs, we recognize our accomplishments, and we grow together. We celebrate and support one another - from big and small things in life to big career moments. And giving back is in our DNA (we get 10 days off each year to do just that). We know that powering an inclusive future starts with us. Because without diversity and a dedication to equality, there is no moving forward. Our 30 Inclusive Communities, that bring people together around commonalities or passions, are leading the way. Together we're committed to learning, listening, caring for our communities, whilst supporting the most vulnerable with a collective effort to make this world a better place either with technology, or through our actions. So, you have colorful hair? Don't care. Tattoos? Show off your ink. Like polka dots? That's cool. Pop culture geek? Many of us are. Passion for technology and world changing? Be you, with us! #WeAreCisco #STO24 #LI-AS3 Message to applicants applying to work in the U.S. and/or Canada: When available, the salary range posted for this position reflects the projected hiring range for new hire, full-time salaries in U.S. and/or Canada locations, not including equity or benefits. For non-sales roles the hiring ranges reflect base salary only; employees are also eligible to receive annual bonuses. Hiring ranges for sales positions include base and incentive compensation target. Individual pay is determined by the candidate's hiring location and additional factors, including but not limited to skillset, experience, and relevant education, certifications, or training. Applicants may not be eligible for the full salary range based on their U.S. or Canada hiring location. The recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees have access to quality medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, short and long-term disability coverage, basic life insurance and numerous wellbeing offerings. Employees receive up to twelve paid holidays per calendar year, which includes one floating holiday, plus a day off for their birthday. Employees accrue up to 20 days of Paid Time Off (PTO) each year and have access to paid time away to deal with critical or emergency issues without tapping into their PTO. We offer additional paid time to volunteer and give back to the community. Employees are also able to purchase company stock through our Employee Stock Purchase Program. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components. For quota-based incentive pay, Cisco pays at the standard rate of 1% of incentive target for each 1% revenue attainment against the quota up to 100%. Once performance exceeds 100% quota attainment, incentive rates may increase up to five times the standard rate with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid.

Job Posting Start Date 01-06-2026 Job Posting End Date 02-28-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary t Flex, we welcome people of all backgrounds. Our employees thrive here by living our values: we support each other as we strive to find a better way, we move fast with discipline and purpose, and we do the right thing always. Through a respectful, inclusive and collaborative culture, a career at Flex offers the opportunity to make a difference, invest in your career growth and join our purpose to make great products that create value and improve people's lives. To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Automation Tech located in Austin, TX What a typical day looks like: Maintain continuous system operation by adjusting, repairing, replacing, or modifying automation/robotic system components Troubleshoot electrical, mechanical, pneumatic and hydraulic systems and components and return to serviceability Ensure preventative maintenance of robotic and process support equipment are completed on a regularly scheduled basis. Understanding of PLCs Read and interpret electrical schematics, mechanical diagrams including complex automated system drawings. Collaborate with the automation team in the qualification process of automated systems. Assists engineers in developing and designing hardware and software required for all automation solutions per specifications. Through troubleshooting, identifies machine malfunctions and isolates the failure mechanism. Repairs the failure mechanism in the most cost-effective manner. Performs preventive maintenance at specified intervals and schedules. Performs calibrations and re-qualifications on equipment at specified intervals and schedules. Assists process technicians and engineers with the installation and removal of process equipment. Analyzes and implements corrective action reports and process tracking mechanisms. Disassembles instruments and equipment and inspects components for defects. Aligns, repairs, replaces, and balances component parts and circuitry. Assists engineers in formulating test, calibration, repair and evaluation plans and procedures to maintain precision accuracy of measuring, recording and indicating instruments and equipment. Highest level may perform both software and hardware maintenance. The experience we're looking to add to our team: Computer skills Experience with material handling, automation and/or robotics equipment Electronic Assembly: schematics, PCB loading, mechanical assembly Cables: crimping, harness assembly, connector/wire soldering, cable prepping Testing: oscilloscope, cable & harness testing, troubleshooting, component testing, logic analyzer Machine Operations: automatic component insertion equipment, surface mount insertion equipment, wave soldering Mechanical & Electrical Tools: power air guns, taps & dies, alignment tools, measuring tools Full range of medical benefits, dental, vision Life Insurance Matching 401K PTO Tuition Reimbursement Employee discounts at local retailers What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

BAS Controls Technician - Austin, TX - $30-$45/hr + Benefits - Company Vehicle - Building Automation & HVAC Controls About the Opportunity: A well-established HVAC and building automation contractor is hiring an experienced BAS Controls Technician to support growing project demand throughout the Greater Austin region. This position is ideal for a technician with strong HVAC controls experience, BAS programming capabilities, and hands-on field expertise across commercial, laboratory, healthcare, and industrial environments. Position Details: Title: BAS Controls Technician Location: Greater Austin, TX Work Type: Field-Based | Project-Focused Travel Industry Focus: Healthcare, Commercial Buildings, Labs, Research Facilities, Industrial Sites Key Responsibilities: Program, start up, and commission HVAC control systems and BAS equipment Execute project tasks professionally and ensure timely completion Support the controls and mechanical service departments with field troubleshooting Oversee project reviews, closeout procedures, and weekly reporting Track job costs, monthly projections, and documentation accuracy Prepare submittals, O&M manuals, test documents, and required records Participate in weekly coordination and production meetings Collaborate with subcontractors and assist site leadership as needed Maintain adherence to jobsite safety guidelines and company standards Communicate effectively to resolve technical challenges and meet project deadlines Ideal Candidate: 5+ years of hands-on HVAC controls or BAS installation experience Niagara AX or N4 Certification (required) BACnet programming or configuration experience (preferred) Knowledge of Distech, Phoenix Controls, Aircuity, or Flow Control systems Ability to pass background and drug screening requirements Compensation & Benefits: Hourly Pay: $30.00 - $45.00/hr (Depending on Experience) Overtime Available Company Vehicle Provided Medical, Dental, and Vision Benefits 401(k) with Company Match 2 Weeks PTO + Paid Holidays Why Join? Join a trusted building automation contractor delivering high-performance HVAC control solutions across Texas. This role offers exposure to advanced controls technology, autonomy in the field, excellent benefits, and strong long-term career development opportunities.

BAS Controls Technician / BAS Technician / BAS Engineer required to join the largest independent commercial HVAC/Controls/BAS manufacturers' rep in North America. The successful BAS Controls Technician / BAS Technician / BAS Engineer will work as part of a team which will be responsible for the installation, start-up, troubleshooting, commissioning and servicing of DDC building automation systems. The ideal BAS Controls Technician / BAS Technician / BAS Engineer will have the ability to communicate clearly with customers, mechanical contractors, subcontractors, and fellow employees. He or she will independently perform required duties located in an office environment or on a construction jobsite. Package & Location: $45 - $65 per hour Medical, Dental, Vision, L/S Term Disability, Life Insurance Generous Paid Time Off (PTO) program + 401(k) retirement plan Location: Austin, TX BAS Controls Technician / BAS Technician / BAS Engineer Responsibilities: Diagnose and repair complex direct digital control system malfunctions requiring extensive knowledge of mechanical systems and electronic theory as well as the ability to create and modify program algorithms for multiple systems. Maintains rapport with customers by examining complaints; identifying solutions; suggesting improved methods and techniques; recommending system improvements. Communicate with all levels of contracting chain to declare installation schedule, milestone updates, job progress, commissioning, and closeout/acceptance plan. Manage various suppliers and subcontractors during the construction phase of the project to ensure their adherence to the job schedule. BAS Controls Technician / BAS Technician / BAS Engineer Requirements: Vocational School four- year program or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field or equivalent military occupational specialty plus two years of industry experience or five years of experience in servicing electronic and/or mechanical systems in the HVAC industry. Must have experience in a service vehicle, doing service work for an HVAC contractor and the ability to work with a team. Minimum 2 year of experience with Lonworks and/or BACnet Control Systems, TRIDIUM and NIAGARA 4 experience preferred. General understanding of IP networks and proficient in reading wiring diagrams. Certificates Preferred: Niagara Tridium, familiar with Siemens Talon, and/or Distech Controls.

Safework specializes in providing all aspects of construction management, project management, safety management and construction inspection. From the beginning of a project to the very end the Safework professionals are committed to the success of each project on which we work. Our employees are the key to our success in providing professional services. What they contribute to our projects and to the company is much more than just doing a "job." In return we are committed to providing our employees with a great place to give their talents, an inclusive environment, and projects that make a difference in the lives of others. We work hard to provide an unparalleled experience for our clients. To do this we understand that people are the backbone of our company. For this reason, we offer industry leading benefits and competitive salaries for professionals who are passionate about serving their clients. Essential Job Duties: Gather statistics and general data; review and combine this information into established reports for use internally. May be responsible for verifying data gathered, such as matching supplier invoices against file copies. Receive direction from immediate supervisor in completing non-routine assignments. Scan, fax and bind documents, reports, and proposals as required. May develop new or revise existing reports and presentations, as directed. Such reports and presentations may be in spreadsheet or graphical formats, or narrative-style word processing. Distribute reports as directed by immediate supervisor. Prepare general correspondence and maintain general files. Maintain a project-wide Calendar and schedule meetings as needed. Answer telephone, take and relay messages, screen callers and direct calls accordingly. May establish and maintain records of equipment, including a log of equipment service dates. May initiate requests for service. Maintain an organized work space by keeping documents and supplies properly stored. May represent immediate supervisor at project-related or other meetings as directed. Perform other responsibilities associated with this position as may be appropriate.

Control Panels USA is seeking an experienced Field Controls Technician to join our growing team. In general, the Field Controls Technician is responsible for complete commissioning of hardware at customer sites including wire terminations, instrument configurations, radio/antenna installation/ alignments and general panel troubleshooting for project field work or service calls. The Field Controls Technician will utilize various hand and electric tools, analytical testing equipment and computer supported software. This role will be located at our Georgetown, Tx . Who we are: Control Panels USA is a manufacturer of Control Panels and Relay Rack assemblies in a wide range of industries. We offer custom design and fabrication for OEM clients, contractors, and end users requiring either large or small production runs. Our factory in Georgetown, Texas houses state of the art engineering, manufacturing, and testing capabilities. This allows us to supply our customers with cost effective solutions while maintaining very competitive lead times. We strive to exceed our customer's expectations while providing the highest quality products and services to our clients in the most cost- efficient manner. Why CP USA? Join our amazing team! Here's what some of our employees have to say about CP USA: Have always enjoyed working for CP USA. This is truly the best working environment I've ever worked in. CP USA does an amazing job of making their employees feel appreciated. They also do great at recognizing strengths and giving people the opportunity to grow. This is a great company to work for and the employee longevity shows it. CP USA provides: 100% employer paid medical, dental and vision insurance for our employees 401(k) with 50% matching Paid time off Reward & Recognition Bonus Program Quarterly company events And More! Our regular work schedule is M-F 8AM-4:30PM. Responsibilities include: Review assigned scope of work with project manager prior to working in the field Coordinate and implement any training required for the project with the Project Manager Safety Instrumentation Controls Site specifics / other onsite training Ensure the following information has been gathered PRIOR to heading to the site Product Literature Material Clarification of Specification, etc. Utilize template documents on all assigned tasks Parameter List Testing Documentation Calibration Documentation Daily Reports Time Sheet Credit Card Reconciliation Update panel schematics for CAD Designer to generate As-Built drawings Generate service tickets and daily reports Coordinate with Project Manager on assigned service calls for Invoicing Maintain Field tools and Test Equipment Maintain good relationship with customers Any other task, assignments, duty, or projects, as requested by management Desired Skills & Experience: Great communication skills, both verbal and written Ability to multi-task and prioritize in a high-pressure environment Intermediate computer skills and comfortability with Word, Excel, Outlook, etc. Ability to pass CP USA's Basic Electrical and Controls Theory Operational knowledge of multimeter functions, pressure calibrators, process meters, soldering wires, connectors. Experience in the theory, application and calibration of flow, pressure, level, and temperature instrumentation. Experience in troubleshooting complex relay logic using drawings and knowledge of motor/valve control logic. Experience in wiring and troubleshooting loop powered and isolated 4-20mA analog control systems. Must be able to work at elevated heights, including the use of ladders Great problem-solving skills Clean driving record Ability for overnight travel approximately 25% of the time Experience with commissioning program logic controller (PLC) software a plus Familiarity with wastewater and water treatment controls a plus Familiarity with radio/cellular telemetry systems a plus. Familiarity with antenna mast rigging principles a plus. Physical Requirements: While performing the duties of this job, the employee is regularly required to talk, hear, use hands and fingers, reach with hands and arms, drive, sit, stoop, climb, and stand. The employee must frequently lift and/or move up to 50 pounds and be willing to work in both indoor and outdoor conditions. Other Requirements: Valid driver license Successful completion MVR check Successful completion of background check Industry: Industrial automation Municipal utilities Electrical/electronic manufacturing We are an Equal Opportunity Employer.

As a Senior Specialty Technician, you'll play a crucial role in ensuring the seamless operation of our diverse range of Access Control, Networking, Burglar Alarm, A/V, and Video Surveillance systems across numerous client properties. Your duties will involve troubleshooting, repairing, and optimizing these systems to maintain high performance and reliability standards, leveraging your extensive experience and expertise. Why do you want to work here? GLAD YOU ASKED! You will receive great Health Benefits Retirement plan A team that will support you and invest in your career. Empowering and inclusive culture Opportunities for advancement and reward your commitment with additional compensation over time. Continuous pay increases as you grow. Escape from the rut! What you will be doing: Carry out preventive maintenance to reduce system downtime and enhance efficiency. Work with clients to understand their needs and offer customized solutions to meet them. Install and program systems according to specifications for optimal performance and integration. Offer technical guidance and support to junior technicians, fostering their professional growth. Stay updated on new technologies and industry trends to improve skills continuously. You are a Rockstar and just what we need if you have Experience with: Access control systems: Brivo, Doorking, Linear, Openpath, and Keri. Camera systems: Digital Watchdog, Geovision, and Eagle Eye. Burglar alarm systems: Honeywell Vista Panels, Lynx Touch, and ProA7. A/V systems, :70V commercial systems, Russound, Control4, and Crestron. Networking principles and protocols, with the ability to troubleshoot network-related issues. Excellent communication and interpersonal abilities, with a customer-centric approach. Demonstrated success in providing top-notch service and surpassing customer expectations. Minimum 3 years of experience in a similar role, adept at managing complex technical challenges. If you find yourself trapped in a job where you feel unseen by management and your potential goes unrecognized, this opportunity could be the change you've been seeking. We're seeking individuals who are genuinely passionate about their work, who take pride in their skills, and who are eager to be recognized for their dedication. Join us in an authentic workplace where your contributions are valued, your ideas are respected, and your career advancement is limitless.

and Sojo Flight™ Sojo Industries is a rapidly expanding industrial automation leader, providing advanced packaging and assembly solutions to the food and beverage sector. We specialize in robotics, mobility, and modularity, operating state-of-the-art, SQF-compliant facilities. Our patented Sojo Flight™ technology brings automated, robotic manufacturing directly to customer sites, transforming traditional production models. Sojo currently operates four (4) manufacturing facilities in the metropolitan areas of Philadelphia, PA; Indianapolis, IN; Austin, TX; and Riverside, CA. Sojo Flight™ is a patented, mobile, modular production system designed to revolutionize variety and multi-pack manufacturing. It enables swift deployment and operational readiness within hours, eliminating supply chain bottlenecks and reducing costs. This highly adaptable system brings high-efficiency automation directly to customer facilities, warehouses, or 3PL locations, reducing freight costs and carbon emissions. Leading U.S. beverage producers across America trust Sojo Flight™ to optimize packaging and enhance production flexibility. Join us to work with cutting-edge automation technology and drive innovation in mobile manufacturing, helping top brands streamline their packaging processes. The Mobile Automation Technician is responsible for ensuring the optimal performance of Sojo's industrial machinery deployed at customer sites nationwide. This role involves executing preventative maintenance schedules and providing expert troubleshooting for equipment issues. Responsibilities Performs maintenance and repairs on electromechanical packaging machines, air compressors, robots, tray formers and other related equipment in Sojo mobile packaging deployments Develops a deep understanding of best practices and optimization techniques for Sojo's packaging lines, and works with Engineering and Operations teams to improve performance Supports the deployment and setup of new Sojo Packaging equipment installations Changes over lines based on pre-programmed recipes for new packaging formats Evaluates equipment failures for root cause and works with broader technical team to make improvements on the equipment Install modifications and upgrades to equipment as instructed by manager Follow PM schedules and procedures, recording all relevant information in Sojo's Computerized Maintenance Management System Install replacement materials and support upgrades to equipment and machines Lubricate, clean and service equipment. Maintains a safe, clean working area. All other tasks as assigned Qualifications Valid Driver's License Mechanical expertise and proficient with hand tools Skilled with computers Electrical troubleshooting experience preferred Knowledge of safety practices for working with factory equipment Forklift certified a plus Ability to work independently with minimal supervision. Possess a sense of urgency and ownership. 5-7 years as a plant mechanic or field service technician preferred Willingness to travel 90%-100% of the time Physical Demands In a typical work setting, people in this job: Use one or two hands to grasp, move, or assemble objects Stand for long periods of time. Kneel, stoop, crouch, bend, stretch, twist or crawl. Operate sky jack of up to 22-feet Hear sounds and recognize the difference between them. See details of objects that are less than a few feet away. See differences between colors, shades, and brightness. UP TO 90% TRAVEL TO LOCATIONS ACROSS THE U.S. NATIONALLY

Job Description Royalty Staffing is helping our client hire hands-on Automotive & Robotics Techs to support the build, maintenance, and operation of robotic platforms and modified vehicles. In this role, you will have a blend of mechanical, electrical, and field support work. Ideal candidates have hands-on experience in automotive or robotics-related fields and are skilled in using diagnostic tools, reading technical diagrams, and working with electrical systems and components. You enjoy working on real-world systems in a fast-moving, technical environment. Location - Austin, TX Work environment - onsite Expected pay amount - 22.00 - 30.00 USD Per Hour Schedule - Monday - Friday, 9AM-6PM (Central Time) Assignment length - 12 month contract As an Automotive & Robotics Technician, you'll: Install and integrate sensors, compute modules, wiring harnesses, and other custom hardware. Diagnose and repair mechanical and electrical issues on robotic systems and vehicle platforms. Perform preventative maintenance, retrofits, and hardware updates as needed. Support field deployments by providing on-site service, troubleshooting, and hardware swaps. Collaborate with engineering and operations teams to support testing and prototyping. Maintain tools, inventory, and clear documentation of repairs and procedures. Requirements Requirements Experience in automotive service, automotive retrofit, robotics, or a similar technical field Proficient with mechanical and electrical tools, multimeters, and diagnostic equipment Ability to read and follow mechanical drawings and wiring diagrams Comfortable working with AC/DC systems, connectors, and electronic modules Valid driver's license and ability to travel locally as needed Able to lift up to 50 lbs and work in field environments Strong attention to detail and problem-solving mindset Team player with strong communication skills and adaptability Nice to Have: Experience with electric vehicles, autonomous systems, or sensor installation Soldering, crimping, or basic prototyping skills Benefits Pre-tax commuter benefits Employer subsidized Healthcare Benefits Flexible Spending Account for healthcare-related costs Company covers all costs for short and long-term disability and life insurance 401k package

VVater is a US-based, next-generation water treatment company that aims to provide Water for Humankind with a cornerstone of sustainability and a promise of a better, healthier tomorrow, servicing various industries and markets around the world from Real Estate, Wastewater Treatment, Municipal Potable Water, and multiple others, in particular, focusing on the recovering and recycling of different waters in a centralized or decentralized way. The company also provides artificial beaches, urban lagoons, wave pools, surf parks, aquatics services, sewage treatment, wastewater treatment, and drinking water solutions. Job Summary: VVater is seeking a skilled and versatile Automation Technician to build, integrate, and maintain the electro-mechanical, hydraulic, and automated systems that power VVater's advanced water purification technologies. This role combines actuator integration, hydraulic/pneumatic control, robotics support, mechatronics assembly, sensor wiring, PLC and control interfaces, and mechanical automation. The ideal candidate is a hands-on technician who can turn engineering concepts into fully functional automated assemblies and field-ready systems-comfortable working across electrical, mechanical, hydraulic, and robotic subsystems. Duties and Responsibilities: Install, configure, and maintain actuators, linear, rotary, servo, and stepper across VVater's mechanical systems. Assemble and troubleshoot hydraulic and pneumatic systems, including cylinders, pumps, valves, regulators, and control manifolds. Integrate sensors, limit switches, encoders, solenoids, flow sensors, and proximity devices into automated assemblies. Perform wiring, termination, cable routing, labeling, and harness building for automation systems. Assist controls engineers in integrating PLC, SCADA, and automation hardware into mechanical assemblies. Build robotic or semi-robotic fixtures, jigs, or automated subassemblies for product development and production. Read and interpret mechanical drawings, hydraulic schematics, electrical schematics, and wiring diagrams. Conduct functional testing, calibration, alignment, and fine-tuning of actuators and automated equipment. Collaborate with mechanical, electrical, and R&D engineers to convert prototypes into manufacturable automated systems. Support troubleshooting of electromechanical failures, diagnosing faults in actuators, drives, relays, and control circuits. Assist in developing automated testing rigs, motion assemblies, and hands-free mechanical systems that improve product reliability. Maintain tools, test equipment, hydraulic lines, and wiring harnesses, and ensure adherence to safety protocols in the shop environment. Perform all other duties as instructed by the company. Skills and Qualifications: • 3-7+ years of hands-on experience in automation, electromechanics, mechatronics, hydraulics, robotics, or industrial equipment assembly. • Strong understanding of actuators, drive systems, relays, solenoids, and industrial wiring practices. • Experience assembling and troubleshooting hydraulic and pneumatic components. • Basic understanding of PLC/controls signals (24VDC, analog/digital I/O). • Able to read and interpret mechanical drawings, electrical schematics, and P&IDs. • Proficient with hand tools, power tools, and shop equipment used in automation assembly. • Strong mechanical aptitude, problem-solving ability, and attention to detail. • Experience with servo/stepper controllers, VFDs, or motion control systems is a plus. • Experience in water treatment, industrial equipment, automotive testing, aerospace, or robotics environments is preferred. • Technical diploma or associate degree in Mechatronics, Industrial Automation, Robotics, or Electromechanical Technology preferred. Note: This job description is not exhaustive. Additional duties and responsibilities may be added as the role evolves and as projects demand. Flexibility and a willingness to adapt are essential qualities for this position. **As a part of our process to ensure a comprehensive evaluation of all applicants, assessment tests are required as part of our recruitment process. Unfortunately, should you elect not to participate in completing the assessment tests, your application will not be able to progress to the next stage or taken into consideration during evaluation.

Insight Global is looking for a Instrumentation and Controls Technician to work on site in Austin, TX and support the strategy and introduction of products based on unique and highly differentiated capabilities of a foundry for semiconductor microsystems and defense electronics companies. Their mission is to advance the state-of-the-art in critical semiconductor domains such as advanced packaging, and in the process to help restore U.S. leadership in semiconductor manufacturing. They are developing cutting-edge semiconductor manufacturing technology that will define future roadmaps of semiconductor devices including logic, memory, 3D packaged devices, including thermal management, etc. Key Responsibilities: Install, calibrate, and maintain sensors, transducers, and control systems across semiconductor manufacturing equipment. Troubleshoot and repair instrumentation systems including PLCs, HMIs, and SCADA interfaces. Perform routine and preventive maintenance on control systems to ensure optimal performance and minimal downtime. Support the integration of new tools and technologies into existing manufacturing lines, including logic and memory device fabrication. Configure and tune PID control loops for temperature, pressure, flow, and other process variables. Assist in the design and implementation of control strategies for complex semiconductor processes. Monitor system performance and analyze data to identify inefficiencies or potential failures. Collaborate with process engineers to optimize equipment performance and support continuous improvement initiatives. Maintain detailed documentation of instrumentation configurations, wiring diagrams, and maintenance logs. Ensure compliance with safety protocols and industry standards for cleanroom and high-tech manufacturing environments. Participate in commissioning and startup activities for new equipment and process lines. Provide technical training and support to operations and maintenance personnel. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements Qualifications: Associate's degree or technical certification in Instrumentation, Electrical Engineering, Mechatronics, or related field. 3+ years of hands-on experience in instrumentation and controls, preferably in semiconductor or advanced manufacturing. Proficiency with PLC programming, industrial networking, and control system integration. Familiarity with cleanroom protocols and semiconductor fabrication processes. Strong analytical and troubleshooting skills with the ability to interpret schematics and technical manuals. Experience with data acquisition systems and industrial automation platforms. Excellent communication and collaboration skills. Certified Electrician

Mosquito Joe of Austin is hiring technicians! We provide mosquito control services to residential and commercial customers, repelling and killing outdoor pests such as mosquitoes, fleas and ticks. Our technicians travel to customer homes to apply barrier spray solutions that keep their yard mosquito free for 21 days taking great pride in customer service. What Our Technicians Do Visually inspect and treat for mosquitoes. Thoroughly explain to the customer the expectations for services and procedures. Maintain good customer relationships. Take personal initiative and responsibility for correcting any problems. Maintain chemical records according to state requirements. Participate in team meetings. Complete licensing requirements and continuing education requirement. Job Requirements Basic pest control knowledge and applicable license. (You may undergo the licensing program during training.) Valid drivers license. Able to walk customer property while carrying equipment weight over 60lbs. for long periods of time in warm temperatures. Comfortable driving to customer locations. Self-confident. Professional. Friendly. Good customer service skills. Detail oriented. Reliable. Willingness and ability to work flexible hours. Willing to market the Mosquito Joe service. Pay Hourly pay + bonuses based on performance. Experienced technicians are also able to bring their vehicles home after their shifts. Compensación: $14.00 - $18.00 per hour When you put on a Mosquito Joe uniform, you become part of the family-a group of people committed to excellent customer service and passionate about making the outdoors a place that's fun for everyone. Working for our franchises means they'll take care of you the way they take care of their own family and friends. Because Mosquito Joe is not just a company that focuses on getting rid of pesky bugs, we're a company that focuses on people, and creating a work culture of respect, integrity, and fun is just as important as serving our customers. *All independently owned and operated franchised businesses operate under the service brands' marks, trademarks, trade names, logos, emblems, slogans, or other indicia of origin in connection with the Mosquito Joe franchise system within a specified geographical area. Only the independently owned and operated franchised business shall have any interaction with or authority for its business and make all employment related decisions related to its franchised business.

Summary: · Metrologist leads the area of dimensional conformance in the metrology lab. Responsible for maintaining calibration of all company holding fixtures, check fixtures and quality gages. Will make all final decisions with set-up and verification of dimensional layouts and capability studies, if unclear direction is given from the customer or blueprint. Essential Functions: · Include the following. Other duties may be assigned. · Verify hold log assure product flow in and out of hold. · Submits annual validation parts and requests · Capability studies and analysis. · Manage QAS Equipment (Gage/Fixture) calibration and maintenance. · Maintain all lab records · Operate CMM and learn programming of CMM · Confirm a capable process and get Quality Manager to remove from control plan. · Verify Service. · Update Hold / Quarantine area including Parts+ System. · Lead inspectors in capability studies. · Review Quality Books. · Assure the lab area is 5S compliant. · Receiving Inspection Certs / verification of product. · It is the responsibility of all employees to take corrective action for all non-conforming items identified by the employee. · Perform other duties as required for the safe, efficient operation of the plant and its employees. · Supervisory Responsibilities- This position does not supervise any employee Qualifications: · To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Blueprint interpretation. · GD&T interpretation. · Statistical techniques. · Basic gage and fixture concept. · Good oral and written communication skills. · PC familiarity. · Good interpersonal skills. · Time management skills. · Education and/or Experience- Associate's degree (A. A.) or equivalent from two-year college or technical school; or one year to three years related experience and/or training; or equivalent combination of education and experience. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand, walk, and sit. The employee must occasionally lift and/or move up to twenty-five (25) pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Job DescriptionSalary: $20.00 - $29.00 per hour + OT (DOE) Whowe are Since 1972, Kier + Wright has beendriven by people, communities and the places that bring us together. With every project, we work to build connections and strengthen relationships. Through our work, we strive to keep communities moving forward, growing sustainably, steadily and purposefully toward a better tomorrow.For more information about our services, visitkierwright.com. EEO SUMMARY The Engineering Technician will be in charge of independently producing engineering design plans for public works project and land development, utilizing AutoCAD software. They will be responsible for working with an engineering design team from initial concepts to final plan production. They will also draft various sketches, plans, and exhibits using CAD. RESPONSIBILITIES Technical Carries out tasks assigned by the Project Lead and engineering team. Drafting grading, drainage, utility, street frontage improvements, and stormwater management plans in AutoCAD Civil 3D. Proficient in AutoCAD Civil3D grading feature lines and utility pipe networks. Preparing drawings per company and public agency CAD standards and project-dependent CAD specifications. EDUCATION + EXPERIENCE 0-2 years of experience in a position requiring intensive AutoCAD/Civil 3D Experience drafting on-site and off-site improvement drawings for land development projects. General knowledge of computers, Microsoft office, Adobe, Internet, etc. Experience with BlueBeam a plus. SKILLS Employee Self-Management Skills Collaboration: Effective working relationships with management, coworkers, subordinates and clients. Mutual respect. Listening to others, adapting to changes, debating alternatives, being open-minded and producing a superior outcome as the result of effective teamwork. Problem Solving: The ability to develop a timely, efficient solution or alternative when a posed with a problem; thinking outside the box; paying attention to the details. Responsiveness/Communication: Communicating in a prompt and professional manner; providing relevant and timely information to management, coworkers, subordinates and clients in a clear, concise and direct manner. Self-Responsible: Taking control and accountability; not waiting for others to direct. Efficient: Ability to maintain focus, stay organized, manage multiple tasks and complete work within deadlines, with minimal errors in a fast-paced environment. Adaptable: Ability to modify practices, systems or attitudes to align with new requirements. Specialty Skills Understanding Civil3D, AutoCAD Basic understanding of Civil Engineering Basic understanding of topographic and boundary surveys Ability to understand and interpret design intent as communicated by engineers. PHYSCIAL REQUIREMENTS AND/OR WORKING CONDITIONS Prolonged periods of sitting (up to 8 hours a day for office staff) Interacting with technology (computer, cellphone, etc.) Ability to lift and/or carry items ( up to 20 lbs.) Prolonged periods of standing/walking (field checks) Ability to work outdoors in various weather conditions (field checks) Occasional travel e.g. driving to offices, jobsites, client meetings, etc. Why Kier + Wright? Great culture Team Collaboration, Innovative problem solving, Responsive to clients, Passionate about work Competitive Pay ($20 - $29/hr + overtime DOE + location) Paid Holidays Free office snacks Much more!

BAS Controls Technician - Austin, TX - Large Mechanical Company w/ Controls Division BAS Controls Technician RESPONSIBILITIES: Well versed in troubleshooting controls BAS systems Knowledge of controls programming and experience rewriting sequences Fundamental understanding of testing building automation systems Strong understanding of commissioning protocols and point to point check outs Work closely with controls installations and start up/termination of equipment and programs Troubleshoot and manipulate current installed BAS programs Communicate efficiently with building owners as well as end users, and general contractors Ability to work in a team environment COMPANY INFO: Founded over 60 years ago Over 3,000 employees nationwide. Clients include Education, K-12, High rise commercial, Healthcare, Higher Education, labs, and critical environments Work/Services: Service Projects, Retrofits, and new construction OFFERED Competitive Compensation Company Vehicle, Tools Cell Phone, and Laptop Retirement Plans Include: 401k/ESOP Program Competitive Benefits Package: Medical, Dental, and Vision Vacation & Holiday time

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

VVater is a US-based, next-generation water treatment company that aims to provide Water for Humankind with a cornerstone of sustainability and a promise of a better, healthier tomorrow, servicing various industries and markets around the world from Real Estate, Wastewater Treatment, Municipal Potable Water, and multiple others, in particular, focusing on the recovering and recycling of different waters in a centralized or decentralized way. The company also provides artificial beaches, urban lagoons, wave pools, surf parks, aquatics services, sewage treatment, wastewater treatment, and drinking water solutions. Job Summary: VVater seeks a highly skilled Mechatronics Technician to build, integrate, and troubleshoot advanced electro-mechanical systems that include actuators, servos, motors, hydraulic and pneumatic components, motion assemblies, and automated mechanisms. This role supports R&D, engineering, product development, and production by turning designs into working automated systems, ranging from deployable mechanical structures to motion-controlled assemblies used in VVater's next-generation water treatment technologies. The ideal candidate is a hands-on problem solver who thrives in a fast-paced engineering environment and is fluent across mechanical, electrical, and automation disciplines. Duties and Responsibilities: Assemble and integrate actuators, servo motors, linear guides, rotary drives, gear systems, solenoids, and automated linkages into working mechanical systems. Build and maintain hydraulic and pneumatic subsystems, including cylinders, valves, regulators, manifolds, pumps, and fluid routing hardware. Install and route sensor packages (limit switches, optical sensors, encoders, proximity sensors, pressure/flow sensors) for feedback and control. Perform electrical wiring, termination, crimping, labeling, and cable management for automation assemblies. Support controls engineers with integration of PLC/SCADA and low-voltage control signals (24VDC, analog/digital I/O). Interpret mechanical drawings, electrical schematics, hydraulic diagrams, motion drawings, and 3D CAD output to guide assembly and troubleshooting. Assist in building robotic or transformer-like mechanisms that extend, fold, lift, rotate, engage, or change physical configuration automatically. Execute functional testing, calibration, alignment, and tuning of electro-mechanical assemblies. Troubleshoot automation faults, diagnose issues in actuators, drives, sensors, relays, control loops, and mechanical subassemblies. Assist in creating automated test rigs, dynamic fixtures, and motion-based prototypes for R&D validation. Collaborate with mechanical, electrical, R&D, and fabrication teams to refine designs and improve repeatability and manufacturability. Perform light machining, drilling, tapping, cutting, grinding, and assembly prep as needed. Maintain shop equipment, tools, wiring stations, hydraulic lines, and safety protocols. Support pilot units, factory builds, field installations, and commissioning when required. Perform all other duties as instructed by the company. Skills and Qualifications: • 3-7+ years of hands-on experience as a Mechatronics Technician, Automation Technician, Electromechanical Technician, Robotics Technician, or related role. • Strong experience with actuators, servos, linear actuators, hydraulic cylinders, pneumatic systems, valves, pumps, and motion assemblies. • Ability to read and interpret mechanical drawings, electrical schematics, wiring diagrams, hydraulic/pneumatic schematics, and P&IDs. • Proficient in electrical wiring, cable harnessing, crimping, soldering, and connectorization. • Familiarity with PLC/automation signals (24VDC, analog inputs, digital I/O) and drive controls. • Strong mechanical aptitude and ability to diagnose multi-discipline issues (mechanical/electrical/hydraulic). • Experience using hand tools, power tools, metrology tools, and shop equipment. • Knowledge of basic machining or fabrication (CNC, drill press, grinders, band saws) is a plus. • Technical diploma or associate degree in Mechatronics, Industrial Automation, Electromechanical Technology, Robotics, or similar field preferred. • Experience in water treatment equipment, industrial machinery, automation, aerospace, automotive systems, or robotics environments is an advantage. • Strong communication skills and ability to work cross-functionally with engineering, R&D, fabrication, and field teams. Note: This job description is not exhaustive. Additional duties and responsibilities may be added as the role evolves and as projects demand. Flexibility and a willingness to adapt are essential qualities for this position. **As a part of our process to ensure a comprehensive evaluation of all applicants, assessment tests are required as part of our recruitment process. Unfortunately, should you elect not to participate in completing the assessment tests, your application will not be able to progress to the next stage or taken into consideration during evaluation.