Controls technician jobs in Hutto, TX

Security and Access Control Technician Description: Security & Access Control Technicians All Levels | Austin, TX $20 $35/hr | Long-term Opportunities | Career Growth TradeSTAR is hiring Security & Access Control Technicians for leading low-voltage integration contractors in the Austin area. Open Roles: Level I III Technicians skilled in cabling, installation, terminations Lead / Service Technicians experienced in crew leadership, programming, system service Job Duties: Install & terminate access control panels, readers, mag locks, strikes Mount & wire CCTV / IP camera systems Read blueprints, interpret system drawings Troubleshoot & service existing systems Collaborate with team & clients for quality project completion Requirements: 1+ years experience in security, access control, or low-voltage systems (preferred for tech-level roles) Familiarity with CCTV, IP cameras, and access control hardware Ability to use hand and power tools safely Capable of reading blueprints / wiring diagrams Reliable transportation and valid driver s license Must pass background check & drug screening Team-oriented, professional, and eager to learn and advance We Offer: Competitive pay based on experience Advancement & career development opportunities Work with top contractors across Austin Company committed to growth from entry to leadership TradeSTAR, Inc. Austin 305 N Heatherwilde Blvd, Suite #310, Pflugerville, TX 78660 ************** | Mon Fri | 8 AM 5 PM #AUS01

Safework specializes in providing all aspects of construction management, project management, safety management and construction inspection. From the beginning of a project to the very end the Safework professionals are committed to the success of each project on which we work. Our employees are the key to our success in providing professional services. What they contribute to our projects and to the company is much more than just doing a "job." In return we are committed to providing our employees with a great place to give their talents, an inclusive environment, and projects that make a difference in the lives of others. We work hard to provide an unparalleled experience for our clients. To do this we understand that people are the backbone of our company. For this reason, we offer industry leading benefits and competitive salaries for professionals who are passionate about serving their clients. Essential Job Duties: Gather statistics and general data; review and combine this information into established reports for use internally. May be responsible for verifying data gathered, such as matching supplier invoices against file copies. Receive direction from immediate supervisor in completing non-routine assignments. Scan, fax and bind documents, reports, and proposals as required. May develop new or revise existing reports and presentations, as directed. Such reports and presentations may be in spreadsheet or graphical formats, or narrative-style word processing. Distribute reports as directed by immediate supervisor. Prepare general correspondence and maintain general files. Maintain a project-wide Calendar and schedule meetings as needed. Answer telephone, take and relay messages, screen callers and direct calls accordingly. May establish and maintain records of equipment, including a log of equipment service dates. May initiate requests for service. Maintain an organized work space by keeping documents and supplies properly stored. May represent immediate supervisor at project-related or other meetings as directed. Perform other responsibilities associated with this position as may be appropriate.

NOTE: This position is reserved for individuals who have been referred to this page by a Workforce Solutions Capital Area Career Advisor. If you have NOT been referred to this page by a Career Advisor, you will need to attend a Career Information Session first then meet with a Career Advisor to determine your eligibility before we will consider you for this position. Click here to start the process to attend a Career Information Session: CLICK HERE Owner: Jin Yan General Description of Job: In general, the Field Technician is responsible for complete commissioning of hardware at customer sites including wire terminations, instrument configurations, radio/antenna installation/ alignments and general panel troubleshooting for project field work or service calls. The Field Technician will utilize various hand and electric tools, analytical testing equipment and computer supported software. Duties to include but not limited to: Review assigned scope of work with project manager prior to working in the field Coordinate and implement any training required for the project with the Project Manager Safety Instrumentation Controls Site specifics / other onsite training Ensure the following information has been gathered PRIOR to heading to the site Product Literature Material Clarification of Specification, etc. Utilize template documents on all assigned tasks Parameter List Testing Documentation Calibration Documentation Daily Reports Time Sheet Credit Card Reconciliation Update panel schematics for CAD Designer to generate As-Built drawings Generate service tickets and daily reports Coordinate with Project Manager on assigned service calls for Invoicing Maintain Field tools and Test Equipment Maintain good relationship with customers Any other task, assignments, duty, or projects, as requested by management Requirements: Great communication skills, both verbal and written Ability to multi-task and prioritize in a high-pressure environment Intermediate computer skills and comfortability with Word, Excel, Outlook, etc. Ability to pass CP USA's Basic Electrical and Controls Theory Operational knowledge of multimeter functions, pressure calibrators, process meters, soldering wires, connectors. Experience in the theory, application and calibration of flow, pressure, level, and temperature instrumentation. Experience in troubleshooting complex relay logic using drawings and knowledge of motor/valve control logic. Experience in wiring and troubleshooting loop powered and isolated 4-20mA analog control systems. Must be able to work at elevated heights, including the use of ladders Great problem-solving skills Clean driving record Ability for overnight travel approximately 25% of the time Experience with commissioning program logic controller (PLC) software a plus Familiarity with wastewater and water treatment controls a plus Familiarity with radio/cellular telemetry systems a plus. Familiarity with antenna mast rigging principles a plus. Physical Requirements: Regularly: Sitting, Standing, Walking, Reaching - with Arms and Hands, Talking, Hearing, Feeling/Touching, Driving, Vision - Close, Peripheral, Depth, Ability to Adjust Focus Frequently: Climbing/Balancing, Stooping/Kneeling/Crouching/Crawling, Lifting of up 50 pounds Working Conditions: Regularly: Indoor, High Temperatures, Loud Noises, Confined Areas, Outdoor Frequently: Cold Temperatures Occasionally: Fumes

As a Senior Specialty Technician, you'll play a crucial role in ensuring the seamless operation of our diverse range of Access Control, Networking, Burglar Alarm, A/V, and Video Surveillance systems across numerous client properties. Your duties will involve troubleshooting, repairing, and optimizing these systems to maintain high performance and reliability standards, leveraging your extensive experience and expertise. Why do you want to work here? GLAD YOU ASKED! You will receive great Health Benefits Retirement plan A team that will support you and invest in your career. Empowering and inclusive culture Opportunities for advancement and reward your commitment with additional compensation over time. Continuous pay increases as you grow. Escape from the rut! What you will be doing: Carry out preventive maintenance to reduce system downtime and enhance efficiency. Work with clients to understand their needs and offer customized solutions to meet them. Install and program systems according to specifications for optimal performance and integration. Offer technical guidance and support to junior technicians, fostering their professional growth. Stay updated on new technologies and industry trends to improve skills continuously. You are a Rockstar and just what we need if you have Experience with: Access control systems: Brivo, Doorking, Linear, Openpath, and Keri. Camera systems: Digital Watchdog, Geovision, and Eagle Eye. Burglar alarm systems: Honeywell Vista Panels, Lynx Touch, and ProA7. A/V systems, :70V commercial systems, Russound, Control4, and Crestron. Networking principles and protocols, with the ability to troubleshoot network-related issues. Excellent communication and interpersonal abilities, with a customer-centric approach. Demonstrated success in providing top-notch service and surpassing customer expectations. Minimum 3 years of experience in a similar role, adept at managing complex technical challenges. If you find yourself trapped in a job where you feel unseen by management and your potential goes unrecognized, this opportunity could be the change you've been seeking. We're seeking individuals who are genuinely passionate about their work, who take pride in their skills, and who are eager to be recognized for their dedication. Join us in an authentic workplace where your contributions are valued, your ideas are respected, and your career advancement is limitless.

Royalty Staffing is helping our client hire hands-on Automotive & Robotics Techs to support the build, maintenance, and operation of robotic platforms and modified vehicles. In this role, you will have a blend of mechanical, electrical, and field support work. Ideal candidates have hands-on experience in automotive or robotics-related fields and are skilled in using diagnostic tools, reading technical diagrams, and working with electrical systems and components. You enjoy working on real-world systems in a fast-moving, technical environment. Location - Austin, TX Work environment - onsite Expected pay amount - 22.00 - 30.00 USD Per Hour Schedule - Monday - Friday, 9AM-6PM (Central Time) Assignment length - 12 month contract As an Automotive & Robotics Technician, you'll: Install and integrate sensors, compute modules, wiring harnesses, and other custom hardware. Diagnose and repair mechanical and electrical issues on robotic systems and vehicle platforms. Perform preventative maintenance, retrofits, and hardware updates as needed. Support field deployments by providing on-site service, troubleshooting, and hardware swaps. Collaborate with engineering and operations teams to support testing and prototyping. Maintain tools, inventory, and clear documentation of repairs and procedures. Requirements Requirements Experience in automotive service, automotive retrofit, robotics, or a similar technical field Proficient with mechanical and electrical tools, multimeters, and diagnostic equipment Ability to read and follow mechanical drawings and wiring diagrams Comfortable working with AC/DC systems, connectors, and electronic modules Valid driver's license and ability to travel locally as needed Able to lift up to 50 lbs and work in field environments Strong attention to detail and problem-solving mindset Team player with strong communication skills and adaptability Nice to Have: Experience with electric vehicles, autonomous systems, or sensor installation Soldering, crimping, or basic prototyping skills Benefits Pre-tax commuter benefits Employer subsidized Healthcare Benefits Flexible Spending Account for healthcare-related costs Company covers all costs for short and long-term disability and life insurance 401k package

and Sojo Flight™ Sojo Industries is a rapidly expanding industrial automation leader, providing advanced packaging and assembly solutions to the food and beverage sector. We specialize in robotics, mobility, and modularity, operating state-of-the-art, SQF-compliant facilities. Our patented Sojo Flight™ technology brings automated, robotic manufacturing directly to customer sites, transforming traditional production models. Sojo currently operates four (4) manufacturing facilities in the metropolitan areas of Philadelphia, PA; Indianapolis, IN; Austin, TX; and Riverside, CA. Sojo Flight™ is a patented, mobile, modular production system designed to revolutionize variety and multi-pack manufacturing. It enables swift deployment and operational readiness within hours, eliminating supply chain bottlenecks and reducing costs. This highly adaptable system brings high-efficiency automation directly to customer facilities, warehouses, or 3PL locations, reducing freight costs and carbon emissions. Leading U.S. beverage producers across America trust Sojo Flight™ to optimize packaging and enhance production flexibility. Join us to work with cutting-edge automation technology and drive innovation in mobile manufacturing, helping top brands streamline their packaging processes. The Mobile Automation Technician is responsible for ensuring the optimal performance of Sojo's industrial machinery deployed at customer sites nationwide. This role involves executing preventative maintenance schedules and providing expert troubleshooting for equipment issues. Responsibilities Performs maintenance and repairs on electromechanical packaging machines, air compressors, robots, tray formers and other related equipment in Sojo mobile packaging deployments Develops a deep understanding of best practices and optimization techniques for Sojo's packaging lines, and works with Engineering and Operations teams to improve performance Supports the deployment and setup of new Sojo Packaging equipment installations Changes over lines based on pre-programmed recipes for new packaging formats Evaluates equipment failures for root cause and works with broader technical team to make improvements on the equipment Install modifications and upgrades to equipment as instructed by manager Follow PM schedules and procedures, recording all relevant information in Sojo's Computerized Maintenance Management System Install replacement materials and support upgrades to equipment and machines Lubricate, clean and service equipment. Maintains a safe, clean working area. All other tasks as assigned Qualifications Valid Driver's License Mechanical expertise and proficient with hand tools Skilled with computers Electrical troubleshooting experience preferred Knowledge of safety practices for working with factory equipment Forklift certified a plus Ability to work independently with minimal supervision. Possess a sense of urgency and ownership. 5-7 years as a plant mechanic or field service technician preferred Willingness to travel 90%-100% of the time Physical Demands In a typical work setting, people in this job: Use one or two hands to grasp, move, or assemble objects Stand for long periods of time. Kneel, stoop, crouch, bend, stretch, twist or crawl. Operate sky jack of up to 22-feet Hear sounds and recognize the difference between them. See details of objects that are less than a few feet away. See differences between colors, shades, and brightness. UP TO 90% TRAVEL TO LOCATIONS ACROSS THE U.S. NATIONALLY

Insight Global is looking for a Instrumentation and Controls Technician to work on site in Austin, TX and support the strategy and introduction of products based on unique and highly differentiated capabilities of a foundry for semiconductor microsystems and defense electronics companies. Their mission is to advance the state-of-the-art in critical semiconductor domains such as advanced packaging, and in the process to help restore U.S. leadership in semiconductor manufacturing. They are developing cutting-edge semiconductor manufacturing technology that will define future roadmaps of semiconductor devices including logic, memory, 3D packaged devices, including thermal management, etc. Key Responsibilities: Install, calibrate, and maintain sensors, transducers, and control systems across semiconductor manufacturing equipment. Troubleshoot and repair instrumentation systems including PLCs, HMIs, and SCADA interfaces. Perform routine and preventive maintenance on control systems to ensure optimal performance and minimal downtime. Support the integration of new tools and technologies into existing manufacturing lines, including logic and memory device fabrication. Configure and tune PID control loops for temperature, pressure, flow, and other process variables. Assist in the design and implementation of control strategies for complex semiconductor processes. Monitor system performance and analyze data to identify inefficiencies or potential failures. Collaborate with process engineers to optimize equipment performance and support continuous improvement initiatives. Maintain detailed documentation of instrumentation configurations, wiring diagrams, and maintenance logs. Ensure compliance with safety protocols and industry standards for cleanroom and high-tech manufacturing environments. Participate in commissioning and startup activities for new equipment and process lines. Provide technical training and support to operations and maintenance personnel. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements Qualifications: Associate's degree or technical certification in Instrumentation, Electrical Engineering, Mechatronics, or related field. 3+ years of hands-on experience in instrumentation and controls, preferably in semiconductor or advanced manufacturing. Proficiency with PLC programming, industrial networking, and control system integration. Familiarity with cleanroom protocols and semiconductor fabrication processes. Strong analytical and troubleshooting skills with the ability to interpret schematics and technical manuals. Experience with data acquisition systems and industrial automation platforms. Excellent communication and collaboration skills. Certified Electrician

I&E Technician-25002006 Description Position Overview:Linde is seeking an I&E Technician to join the team in the Taylor, Tx area. This position will report to the Taylor ASU Facility Superintendent and will work with regional Reliability Team to achieve reliability goals. Purpose:This role will provide technical execution of installation, maintenance, and troubleshooting tasks on relevant instrumentation, controls, analytical, electrical and mechanical systems for ASU's, hydrogen electrolyzers, backup systems, purifier buildings and associated equipment to continuously supply quality product safely, complying with all environmental regulations and daily customer requirements. This role will operate bulk gas plants, electrolyzers and purifiers as needed. Key Responsibilities:Understand and adhere to company safety work policies and operating practices. Report safety incidents and near misses. Startup, operate, and maintain air separation and bulk gas delivery systems, including associated tanks, purifiers, controls, and fill/offload systems. Troubleshoot shutdowns and perform corrective maintenance to allow equipment/plant restarts. Coordinate scheduling of planned maintenance and perform some preventative maintenance on system components. Operate units to continuously supply products at the appropriate quantities and qualities safely and economically, complying with all environmental regulations and daily customer requirements. Monitor process performance and makes appropriate adjustments to remedy deviations and align to the specified norm. Analytical maintenance and troubleshooting of process analyzers, including GC's. Calibration and proper documentation for QA analyzers Maintain cylinder inventory and replace cylinders on analytical equipment. Generate energy control plans, perform lock-out tag-out, correctly and safely permit maintenance work, and oversee contractors as necessary. Safely troubleshoot, repair, and maintain all rotating equipment and associated mechanical systems including compressors, pumps, fans, and valves. Prepare and execute projects to improve facility availability and reliability. Read, interpret and maintain (as needed) P&IDs and schematic wiring diagrams in compliance with SOP's, QA, and MOC policies. Plan, schedule, coordinate and execute major installations, maintenance activities, calibration, testing and validation of industrial instrumentation and analyzer systems including:Control valves and related actuators & positioners Older vintage hard-wired instrument systems Modern transmitter-based instrument systems Product Purity AnalyzersMaintain and troubleshoot PLC/ DCS systems. Maintain and troubleshoot electrical systems and equipment ( Be knowledgeable of Switchgear control systems and functionally rack breakers in and out or switch them. Ensure all FDA-QA and SIS annual functional testing requirements are met (i. e. isolation circuit test, LTP testing, etc. ) Understand Process Loop interaction and impact on the process. Frequent customer engagement is needed. Compliance Trainings at customer sites must be completed to obtain/maintain access badges. Plan and perform major equipment installation, maintenance, overhauls, and inspections - including corrective, preventative or predictive work - of industrial mechanical and rotating systems and equipment including but not limited to:Centrifugal, Reciprocating and Screw CompressorsCentrifugal and positive displacement Pumps including Cryogenics. TurbinesSynchronous and Induction MotorsHigh-speed GearboxesHeat Exchangers, Cryogenic Interchangers, Chillers and Cooling TowersWater treatment systems Gas Fired VaporizersH2 GeneratorsPiping systems and other related process equipment. Backup systems support. ValvesAssist in turnaround planning and cost estimation of mechanical and electrical work. Assist in Identifying and resolving chronic mechanical and electrical asset concerns (bad actors). This position requires a combination of office work and field work. The technician will support the operation of our facilities to ensure they are operated and maintained in a safe, reliable and environmentally friendly manner. The job requires a rotating on-call status. Some overtime, holiday, and afterhours work will be required. Employee must be able to access elevated electrical and mechanical equipment via ladders, scaffolding and man-lifts. Position may also require providing turnaround support within the region. Excellent communication and interpersonal skills are needed to develop working relationships both internally with plants' maintenance team and externally with customers and contractors. Ad hoc travels to customer sites or plants are required for this role. Qualifications Qualifications:Proven understanding of control, instrumentation, and electrical systems in industrial environment. Ability to troubleshoot 4-20mA transmitter, electro-pneumatic control loops, as well as industrial control components (e. g. , solenoid valve, actuators, regulators, PID controllers, etc). Completion of a formal apprenticeship program or technical degree (Associate or Bachelor's) or equivalent combination of work experience and technical education/training required. At least 3+ years of related experience within the fields of customer service, UHP production systems, instrumentation and controls, gas purity analysis, engineering work procedure preparation and execution, technical documentation review and revision. Proven understanding of regulatory and industrial standards and codes. Capable of operating a forklift or overhead crane or man lift according to company policy. Highly proficient with standard software packages (Microsoft, Adobe) and working knowledge of HMIs, CAD, control logic editing. Ability to read, interpret and revise engineering drawings such as P&IDs, electrical drawings. Knowledge of Preventive and Predictive maintenance of industrial mechanical and rotating systems and equipment. Experience in installation, troubleshooting, inspection and repairs of industrial mechanical and rotating systems and equipment such as Compressors, Turbines, Blowers, and Heat Exchangers. About Linde:Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture:At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit www. linde. com. Benefits:Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-LL1Primary Location Texas-TaylorSchedule Full-time Job - OperationsUnposting Date Ongoing

Summary: · Metrologist leads the area of dimensional conformance in the metrology lab. Responsible for maintaining calibration of all company holding fixtures, check fixtures and quality gages. Will make all final decisions with set-up and verification of dimensional layouts and capability studies, if unclear direction is given from the customer or blueprint. Essential Functions: · Include the following. Other duties may be assigned. · Verify hold log assure product flow in and out of hold. · Submits annual validation parts and requests · Capability studies and analysis. · Manage QAS Equipment (Gage/Fixture) calibration and maintenance. · Maintain all lab records · Operate CMM and learn programming of CMM · Confirm a capable process and get Quality Manager to remove from control plan. · Verify Service. · Update Hold / Quarantine area including Parts+ System. · Lead inspectors in capability studies. · Review Quality Books. · Assure the lab area is 5S compliant. · Receiving Inspection Certs / verification of product. · It is the responsibility of all employees to take corrective action for all non-conforming items identified by the employee. · Perform other duties as required for the safe, efficient operation of the plant and its employees. · Supervisory Responsibilities- This position does not supervise any employee Qualifications: · To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Blueprint interpretation. · GD&T interpretation. · Statistical techniques. · Basic gage and fixture concept. · Good oral and written communication skills. · PC familiarity. · Good interpersonal skills. · Time management skills. · Education and/or Experience- Associate's degree (A. A.) or equivalent from two-year college or technical school; or one year to three years related experience and/or training; or equivalent combination of education and experience. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand, walk, and sit. The employee must occasionally lift and/or move up to twenty-five (25) pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

TDA - ACP - Metrologist (Laboratory Technologist/QA/QC Lab Technician/Calibration/Measurement/Technician) (57246) (00054582) Organization: DEPARTMENT OF AGRICULTURE Primary Location: Texas-Giddings Work Locations: METROLOGY LAB GIDDINGS 1258 County Road 226 Giddings 78942 Job: Farming, Fishing, and Forestry Employee Status: Regular Schedule: Full-time Standard Hours Per Week: 40. 00 Travel: Yes, 10 % of the Time State Job Code: 1325 Salary Admin Plan: B Grade: 20 Salary (Pay Basis): 4,650. 00 - 4,900. 00 (Monthly) Number of Openings: 1 Overtime Status: Non-exempt Job Posting: Dec 17, 2025, 11:22:02 AM Closing Date: Jan 7, 2026, 11:59:00 PM Description METROLOGIST (Laboratory Technologist/QA/QC Lab Technician/Calibration/Measurement/Technician) Salary Information: B20, $4,650. 00 - $4,900. 00/MO. State Classification: Inspector V - 1325FLSA Status: NonexemptPosting Number: 26-57246-1RLocation: Giddings, TXTelework Option: TDA does not offer telework, and all employees are required to be physically present for work. HOW TO APPLYApply online via CAPPS. Applicants applying in WIT must complete the supplemental questions to be considered for the position. To complete the supplemental questions, go to CAPPS Recruit. WHO ARE WE The Texas Department of Agriculture's (TDA) Agriculture & Consumer Protection Division administers consumer protection programs which includes overseeing items like grocery store scales, egg quality, nursery products, licensing and training pesticide applicators, worker protection and registering pesticides for sale. TDA's consumer protection efforts promote success, unity and prosperity for the people of Texas. WHAT YOU'LL DOThe Metrologist will perform advanced inspection work in the state metrology lab. You will work on planning, developing, and implementing measurement standards according to National Institute of Standards and Technology (NIST) Office of Weights & Measure (OWM) requirements. You will serve as a state legal signatory, technical consultant and liaison with industry and government agencies. You may train others. You will test, calibrate, and certify standards within the calibration and measuring capabilities of the lab for other labs, industry and governmental jurisdictions. You will work under minimal supervision with considerable latitude for the use of initiative and independent judgment. PRIMARY RESPONSIBLITIES Perform metrological calibrations on artifacts received within the calibration and measuring capabilities (scope) of the lab, in a manner that is metrologically traceable through NIST to the International System of Units (SI). Compile and generate official calibration certificates as an approved signatory according to the international standards requirements for reporting results in ISO/IEC 17025, Handbook 143 and NVLAP Handbook 150. Facilitate lab traceability, quality control, technical standards compliance and laboratory's calibration program. Develop and maintain calibration spreadsheets, calibration control charts, and a variety of statistical computations to monitor quality performance. Contribute to the development and compilation of the annual NIST Recognition submission packet and to any required submission for accreditation approval. Contribute to the development and establishment of lab policy and procedures addressing the management system objectives, quality, purchasing, complaints, non-conforming work, improvements, corrective actions, root cause analyses, identification of training needs, and environmental conditions. Comply with requirements, laws, regulations, NIST handbook requirements, standard operating procedures, policies, and procedures for the state metrology laboratory. Assist with preparing and reviewing literature, statutes, rules, and international standards. Participate in training activities by participating in regional measurement assurance program training sessions, webinars, proficiency testing / inter-laboratory comparisons and other mandatory training required to retain metrologist signatory credential. Assist with the training of laboratory staff on metrology, quality, and technical topics. Contribute to the effective laboratory administrative operations, by recording lab meeting minutes, compiling, and generating technical reports, budget prioritization, and legislative information reports. Contribute to and participate in collaborative meetings, including laboratory staff meetings, regional measurement assurance meetings, and management review meetings. Receive and respond to telephone inquiries and provides consultation to external customers and agency staff regarding metrology, quality, and technical topics. Routinely conduct internal audits to determine trends and resolve technical problems; perform root cause analyses; and recommend corrective, preventative or improvement actions to lab manager. Conduct risk assessment audits to identify, analyze, evaluate, and treat risk primarily concerning safety, economic, ethical and measurement quality in the metrology lab. Ship and receive artifacts including loading and unloading of large trucks. Perform ground and building maintenance duties inside and outside the laboratory. Follow all TDA policies and procedures. Perform other duties as assigned. Qualifications QUALIFICATIONS/REQUIREMENTS FOR THE POSITION (The application must state how each of the following qualifications are met - resumes do not take the place of the required state of Texas application which must be completed in CAPPS or WIT. ) Bachelor's degree (one year work experience related to the essential duties may substitute for one year of college). Minimum (1) year work experience in a laboratory environment, measurement, natural science or related science. Completion of NIST's Mass and Volume classes, including LAP problems or successful completion within 24 months. Bachelor's degree with major course work in Mathematics or Science may substitute for the required work experience. PREFERRED QUALIFICATIONSWork experience performing statistical computations for determining process controls and quality management. Work experience in consumer protection and/or weights and measures KNOWLEDGE, SKILLS & ABILITIESKnowledge of laws, codes, standards, and regulations related to the area of responsibility; of the principles and methods of inspection and quality control; and of business practices in regulated occupations and industries. Skill in conducting inspections; in determining proper courses of action; in using instruments or tools necessary to perform inspections; in using a computer and applicable programs and databases; in providing customer service excellence to both internal and external customers; and in maintaining records and written reports. Ability to prepare reports; to interpret laws and regulations; to gather and analyze data; to communicate effectively, orally and in writing; to exercise sound judgment and discretion; and to maintain the highest level of confidentiality. PHYSICAL REQUIREMENTS & WORKING CONDITIONSWork is performed in both an office and a laboratory. Work involves safely lifting and carrying 50-100 pounds repeatedly and remaining stationary for extended periods of time. May involve walking; standing; pushing and pulling; kneeling, stooping, and bending; and travel, occasionally overnight. Also involves operating a precision laboratory balance, forklift, and overhead hoist. Involves infrequent exposure to gaseous fumes and chemicals at levels within allowable short term exposure levels. May involve travel (up to 10%), occasionally overnight. H-1B Visa SponsorshipWe are unable to sponsor or take over sponsorship of an employment Visa. BENEFITSThe State of Texas offers a variety of benefits for you and your family that are comprehensive and, on average, make up about one-third of total compensation. Benefits include:* Retirement Plan * Paid Group Health & Life Insurance for employees * Paid Holidays * Paid Vacation Leave* Paid Sick Leave * Longevity Pay* Dental * Vision* Dependent Optional Life Insurance * Voluntary AD&D Insurance* Dependent Health & Life Insurance * Health & Dependent care flexible spending accounts Only candidates selected for an interview will be contacted. A skills exercise may be conducted at the time of the interview. Due to the high volume of applications, we do not accept telephone calls. If you submitted your application through the CAPPS Career Center, you may also check the status of your application by accessing your profile and selecting My Jobpage and selecting My Submissions. *A valid government-issued driver's license, which is recognized by the Texas Department of Public Safety and in good standing, and an acceptable driving record are required. TDA will verify this information with the Texas Department of Public Safety. Applicants with a driver's license not issued by the State of Texas should obtain and be prepared to provide a copy of their current driving record on or before their first day Background Checks: A criminal conviction records check is required for applicants who are selected for a position. Equal Employment Opportunity (EEO): TDA is an equal employment opportunity (EEO) employer and does not discriminate on the basis of race, color, religion, sex, national origin, disability, age, genetic information, military status, or protected activity. Reasonable Accommodations: If you are scheduled for an interview and require any reasonable accommodation in our interview process, please inform the hiring representative who calls you to schedule your interview or an HR representative at ************. Whenever possible, please give the hiring or HR representative sufficient time to consider and respond to your request. TDA participates in E-Verify and will provide the Social Security Administration and, if necessary, the Department of Homeland Security, with information from each new employee's Form I-9 to confirm work authorization. Military and Former Foster Child Employment Preference: TDA complies with the provisions of the veterans and former foster child employment preference acts. Please contact our Human Resources-Veterans Liaison at ************** for assistance. Go to ************************** com/, ************ onetonline. org/, or *********** careeronestop. org/ for assistance in translating your military experience and training courses into civilian job terms, qualifications/requirements, and skill sets. Additional Military Occupational Specialty (MOS) Code or Crosswalk information is available from the Texas State Auditor's Office at Compliance, Inspection and Investigation MOS Codes.

TDA - ACP - Metrologist (Laboratory Technologist/QA/QC Lab Technician/Calibration/Measurement/Technician) (57246) (00054582) Organization: DEPARTMENT OF AGRICULTURE Primary Location: Texas-Giddings Work Locations: METROLOGY LAB GIDDINGS 1258 County Road 226 Giddings 78942 Job: Farming, Fishing, and Forestry Employee Status: Regular Schedule: Full-time Standard Hours Per Week: 40. 00 Travel: Yes, 10 % of the Time State Job Code: 1325 Salary Admin Plan: B Grade: 20 Salary (Pay Basis): 4,650. 00 - 4,900. 00 (Monthly) Number of Openings: 1 Overtime Status: Non-exempt Job Posting: Dec 17, 2025, 5:22:02 PM Closing Date: Jan 8, 2026, 5:59:00 AM Description METROLOGIST (Laboratory Technologist/QA/QC Lab Technician/Calibration/Measurement/Technician) Salary Information: B20, $4,650. 00 - $4,900. 00/MO. State Classification: Inspector V - 1325FLSA Status: NonexemptPosting Number: 26-57246-1RLocation: Giddings, TXTelework Option: TDA does not offer telework, and all employees are required to be physically present for work. HOW TO APPLYApply online via CAPPS. Applicants applying in WIT must complete the supplemental questions to be considered for the position. To complete the supplemental questions, go to CAPPS Recruit. WHO ARE WE The Texas Department of Agriculture's (TDA) Agriculture & Consumer Protection Division administers consumer protection programs which includes overseeing items like grocery store scales, egg quality, nursery products, licensing and training pesticide applicators, worker protection and registering pesticides for sale. TDA's consumer protection efforts promote success, unity and prosperity for the people of Texas. WHAT YOU'LL DOThe Metrologist will perform advanced inspection work in the state metrology lab. You will work on planning, developing, and implementing measurement standards according to National Institute of Standards and Technology (NIST) Office of Weights & Measure (OWM) requirements. You will serve as a state legal signatory, technical consultant and liaison with industry and government agencies. You may train others. You will test, calibrate, and certify standards within the calibration and measuring capabilities of the lab for other labs, industry and governmental jurisdictions. You will work under minimal supervision with considerable latitude for the use of initiative and independent judgment. PRIMARY RESPONSIBLITIES Perform metrological calibrations on artifacts received within the calibration and measuring capabilities (scope) of the lab, in a manner that is metrologically traceable through NIST to the International System of Units (SI). Compile and generate official calibration certificates as an approved signatory according to the international standards requirements for reporting results in ISO/IEC 17025, Handbook 143 and NVLAP Handbook 150. Facilitate lab traceability, quality control, technical standards compliance and laboratory's calibration program. Develop and maintain calibration spreadsheets, calibration control charts, and a variety of statistical computations to monitor quality performance. Contribute to the development and compilation of the annual NIST Recognition submission packet and to any required submission for accreditation approval. Contribute to the development and establishment of lab policy and procedures addressing the management system objectives, quality, purchasing, complaints, non-conforming work, improvements, corrective actions, root cause analyses, identification of training needs, and environmental conditions. Comply with requirements, laws, regulations, NIST handbook requirements, standard operating procedures, policies, and procedures for the state metrology laboratory. Assist with preparing and reviewing literature, statutes, rules, and international standards. Participate in training activities by participating in regional measurement assurance program training sessions, webinars, proficiency testing / inter-laboratory comparisons and other mandatory training required to retain metrologist signatory credential. Assist with the training of laboratory staff on metrology, quality, and technical topics. Contribute to the effective laboratory administrative operations, by recording lab meeting minutes, compiling, and generating technical reports, budget prioritization, and legislative information reports. Contribute to and participate in collaborative meetings, including laboratory staff meetings, regional measurement assurance meetings, and management review meetings. Receive and respond to telephone inquiries and provides consultation to external customers and agency staff regarding metrology, quality, and technical topics. Routinely conduct internal audits to determine trends and resolve technical problems; perform root cause analyses; and recommend corrective, preventative or improvement actions to lab manager. Conduct risk assessment audits to identify, analyze, evaluate, and treat risk primarily concerning safety, economic, ethical and measurement quality in the metrology lab. Ship and receive artifacts including loading and unloading of large trucks. Perform ground and building maintenance duties inside and outside the laboratory. Follow all TDA policies and procedures. Perform other duties as assigned. Qualifications QUALIFICATIONS/REQUIREMENTS FOR THE POSITION (The application must state how each of the following qualifications are met - resumes do not take the place of the required state of Texas application which must be completed in CAPPS or WIT. ) Bachelor's degree (one year work experience related to the essential duties may substitute for one year of college). Minimum (1) year work experience in a laboratory environment, measurement, natural science or related science. Completion of NIST's Mass and Volume classes, including LAP problems or successful completion within 24 months. Bachelor's degree with major course work in Mathematics or Science may substitute for the required work experience. PREFERRED QUALIFICATIONSWork experience performing statistical computations for determining process controls and quality management. Work experience in consumer protection and/or weights and measures KNOWLEDGE, SKILLS & ABILITIESKnowledge of laws, codes, standards, and regulations related to the area of responsibility; of the principles and methods of inspection and quality control; and of business practices in regulated occupations and industries. Skill in conducting inspections; in determining proper courses of action; in using instruments or tools necessary to perform inspections; in using a computer and applicable programs and databases; in providing customer service excellence to both internal and external customers; and in maintaining records and written reports. Ability to prepare reports; to interpret laws and regulations; to gather and analyze data; to communicate effectively, orally and in writing; to exercise sound judgment and discretion; and to maintain the highest level of confidentiality. PHYSICAL REQUIREMENTS & WORKING CONDITIONSWork is performed in both an office and a laboratory. Work involves safely lifting and carrying 50-100 pounds repeatedly and remaining stationary for extended periods of time. May involve walking; standing; pushing and pulling; kneeling, stooping, and bending; and travel, occasionally overnight. Also involves operating a precision laboratory balance, forklift, and overhead hoist. Involves infrequent exposure to gaseous fumes and chemicals at levels within allowable short term exposure levels. May involve travel (up to 10%), occasionally overnight. H-1B Visa SponsorshipWe are unable to sponsor or take over sponsorship of an employment Visa. BENEFITSThe State of Texas offers a variety of benefits for you and your family that are comprehensive and, on average, make up about one-third of total compensation. Benefits include:* Retirement Plan * Paid Group Health & Life Insurance for employees * Paid Holidays * Paid Vacation Leave* Paid Sick Leave * Longevity Pay* Dental * Vision* Dependent Optional Life Insurance * Voluntary AD&D Insurance* Dependent Health & Life Insurance * Health & Dependent care flexible spending accounts Only candidates selected for an interview will be contacted. A skills exercise may be conducted at the time of the interview. Due to the high volume of applications, we do not accept telephone calls. If you submitted your application through the CAPPS Career Center, you may also check the status of your application by accessing your profile and selecting My Jobpage and selecting My Submissions. *A valid government-issued driver's license, which is recognized by the Texas Department of Public Safety and in good standing, and an acceptable driving record are required. TDA will verify this information with the Texas Department of Public Safety. Applicants with a driver's license not issued by the State of Texas should obtain and be prepared to provide a copy of their current driving record on or before their first day Background Checks: A criminal conviction records check is required for applicants who are selected for a position. Equal Employment Opportunity (EEO): TDA is an equal employment opportunity (EEO) employer and does not discriminate on the basis of race, color, religion, sex, national origin, disability, age, genetic information, military status, or protected activity. Reasonable Accommodations: If you are scheduled for an interview and require any reasonable accommodation in our interview process, please inform the hiring representative who calls you to schedule your interview or an HR representative at ************. Whenever possible, please give the hiring or HR representative sufficient time to consider and respond to your request. TDA participates in E-Verify and will provide the Social Security Administration and, if necessary, the Department of Homeland Security, with information from each new employee's Form I-9 to confirm work authorization. Military and Former Foster Child Employment Preference: TDA complies with the provisions of the veterans and former foster child employment preference acts. Please contact our Human Resources-Veterans Liaison at ************** for assistance. Go to ************************** com/, ************ onetonline. org/, or *********** careeronestop. org/ for assistance in translating your military experience and training courses into civilian job terms, qualifications/requirements, and skill sets. Additional Military Occupational Specialty (MOS) Code or Crosswalk information is available from the Texas State Auditor's Office at Compliance, Inspection and Investigation MOS Codes.

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. We're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations. Responsibilities * Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions * Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality * Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions * Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards * Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations * Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations * Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness * Provide technical support and training to field technicians and end-users as needed Qualifications * Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred * Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry * Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems * Familiarity with autonomous systems, marine navigation, and control systems is preferred * Strong analytical and problem-solving skills with attention to detail * Experience working with the DoD or government contracts is a plus Benefits * Medical Insurance: Comprehensive health insurance plans covering a range of services * Saronic pays 100% of the premium for employees and 80% for dependents * Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care * Saronic pays 99% of the premium for employees and 80% for dependents * Time Off: Generous PTO and Holidays * Parental Leave: Paid maternity and paternity leave to support new parents * Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses * Retirement Plan: 401(k) plan * Stock Options: Equity options to give employees a stake in the company's success * Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage * Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands * Ability to perform physically demanding work for extended periods of time, up to 12 hours/day * Frequently and repetitively, lift, push and carry up to 20 lbs. * The ability to carry 20 lbs. up and down stairs * Ability to work outside for an extended period of time * Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes * Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain * Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day * Climb and maintain balance on ladders, platforms, or other high structures * Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing * Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time * Exposures to hazardous materials and ability to follow waste handling/disposal procedures * Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require "U.S. Person" status. As defined by U.S. law, individuals who are any one of the following are considered to be a "U.S. Person": (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

**About Austin Industrial** Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of 4,000 employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency. **Instrumentation Technician - (8** **plus years Journeyman experience) Plant Maintenance experience preferred. Heavy on instrument.** Must be able to test, calibrate, troubleshoot, overhaul and repair controlling, indicating and measuring instrument devices to ensure specified operating performance using hand tools, testing and calibrating instruments and equipment and precision measuring instruments. Ability to read and understand manuals, blueprint schematics and testing specifications. Must have some knowledge of electrical schematics and PLCs. Other duties may be assigned. Plant Maintenance experience preferred. Heavy on instrument. **Specific Duties and Responsibilities:** + Reads and works from related blueprints and other schematic drawings. + Calibrates, installs and/or removes various instrumentation devices. + Cuts, bends and installs tubing needed for the proper installation of the instrumentation device. + When needed, reads and understands quality control manuals and testing specifications in order to obtain data needed to test or calibrate specific devices. + Sets controls to regulate factors, such as current flow, timing cycle, pressure or vacuum, or temperature according to specifications. + As needed, disassembles instrument or device in order to determine cause of defective operation or failure. + Rejects malfunctioning devices and routes to specified departments for repair or salvaging of survivable parts. + Layout, fabricate and install tubing and tub trays. + Apply knowledge of mathematics to instrumentation, such as ratio and proportions, numbers with power of 10's, algebra equations, English-to-metric conversion, inches of water to PSI, inches of mercury to PSI, etc. + Read blueprints, schematics and loop drawings and prepare job reports. + Assemble and disassemble all types of electronic process controls, pneumatic controls and hydraulic systems and components. + Calibrate equipment using common calibration procedures and be able to read, interpret, apply and know where to find other procedures. + Understand the principles of pH and redox and equipment needed to measure them and be able to control the pH and redox of a liquid. + Understand steam and how it reacts to different situations, (e.g. saturation properties). + Work with the principles of chemistry and physics required in instrumentation such as specific gravity, density of liquids and solids, mechanical advantages, proportions of liquids, melting points, freezing points, boiling points of liquids, etc. + Troubleshoot and check out electrical, pneumatic, and hydraulic systems using proper test equipment. + Understand fundamental instrumentation loops and how they function as a loop, and what the function of each component part is in each type of loop. + Understand common types of chemical plant process equipment such as distillation columns, heat exchangers, boilers, turbines and compressors. + Apply the procedures for measuring pressure level, flow, temperature, weight, density, heat flux, humidity and moisture, etc. + Maintain current electrician's license or identification card to meet state regulations. + Other duties as assigned. + Applicants must be legally authorized to work for ANY employer in the United States. Austin is unable to sponsor or take over sponsorship of an employment visa for this position. + The role involves extensive use of computers for data entry, documentation, analysis, and internal communication. + Candidates must be comfortable and proficient in the full suite of Microsoft Office (Word, Excel, PowerPoint, Outlook, Teams, OneNote, etc.) and able to learn new office applications quickly. + Familiarity with enterprise CMMS (Computer‑Aided Maintenance Management System) software and Confluence is required for daily task management, issue tracking, and collaboration. **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. **Qualifications Required for this Position:** **Education:** High school diploma, Journeyman experience in maintenance training; **Certifications/ Licenses: NCCER, TDLR Electrical License a plus and valid ID** **Experience:** **Maintenance - Instrumentation Technician (** **8 plus years Journeyman experience) Plant Maintenance experience preferred. Heavy on instrument.** **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** **Qualifications** **Licenses & Certifications** **Preferred** + OSHA 30 + OSHA 10 + NCCER-Inst Tech Certified + NCCER-Ind Elec Cert Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Join Contoro Robotics - Revolutionizing Warehouse Automation with Cutting-Edge Robotics At Contoro Robotics, we're on a mission to solve labor challenges through advanced robotic solutions. Headquartered in Austin, TX, our fast-growing startup is transforming the supply chain industry with our flagship warehouse automation technology. Our team is made up of top-tier experts in robotics, AI, and logistics, working together to push the boundaries of automation. We're looking for talented and ambitious individuals to join us on this journey-helping shape the future of robotics while growing alongside a world-class team. If you're passionate about innovation, problem-solving, and making a real-world impact, we want to hear from you! About the Role We're looking for a highly capable Engineering Technician to help bring our robots to life. You'll be responsible for mechanical and electrical assembly, wiring, testing, and troubleshooting across various sub-systems - from drive components to electrical panels and robot arms. You'll work hands-on with tools and equipment in our full fabrication shop and play a key role in building systems from the ground up. Job Responsibilities Perform mechanical assembly of drive systems, pneumatic systems, conveyor systems, and electrical panels. Build and wire electrical panels, including component installation and electrical connections Route cables, wiring, and pneumatic lines with attention to workmanship quality. Configuration of subsystems including PLC, computers, sensors, cameras and motor drivers. Execute functional tests of the full robotic system to confirm the robot is built to engineering requirements. Troubleshoot mechanical, electrical, and software-related system issues Operate shop tools and equipment such as CNC plasma cutters, press brakes, welders, mills, band saws, and hand tools Follow engineering documentation and work closely with the manufacturing lead and engineering team Qualification/Requirements Required: Associate's degree in engineering, manufacturing technology, or related field 3+ years of manufacturing experience in a professional work environment. Strong hands-on mechanical and electrical assembly skills Familiarity with control panels, wiring schematics, and cable management Comfortable using shop equipment and power tools Ability to troubleshoot integrated systems Excellent problem-solving skills and attention to detail. Willingness to work hands-on to build robot prototypes and early production robots Preferred: Experience with robotics or industrial robotic automation systems. Experience with Robot Operating System (ROS) and configuring cameras/sensors is a plus Familiar with Mechanical CAD Assembly Tools (SOLIDWORKS Preferred) What We Offer: Competitive salary and equity options. Comprehensive benefits including health, vision, dental, and 401(k) plans. A vibrant and dynamic work environment where your contributions directly impact the company's success. Opportunities for professional growth in a fast-paced startup setting. Health and Wellness Reimbursement Program Continuous Education Program Free Office snacks Pet friendly office Flexible work hours Employee Recognition NectarHR Ping Pong and entertainment area Paid parental leave PTO and company holidays Team Outings and happy hours

Job Description AI/ML Perception Engineer - Build Autonomous Intelligence for Next-Gen Defense Robotics! Austin, TX | Onsite A rapidly scaling, venture-backed startup is forging the next generation of autonomous defense robotics designed to react in milliseconds to dynamic, high-threat scenarios. As a Principal AI/ML Perception Engineer, you will take the helm of the perception and autonomy stack, shaping the intelligence that powers a fully autonomous robotic system built for real-world deployment. In this early engineering role, you'll architect and implement the full perception pipeline, from sensor fusion and model development to field validation and optimization on embedded platforms. This is a rare zero-to-one opportunity where your work becomes the foundation of the product's decision-making capabilities. You'll see your models running in rugged outdoor environments, influence the platform's long-term technical direction, and help define what modern autonomous defense systems are capable of. About Us We're an emerging technology company focused on building compact robotic systems that can perceive, think, and act autonomously under extreme conditions. Our team blends deep experience in autonomy, machine learning, sensing, and hardware development. We thrive at the intersection of software and real-world constraints, solving complex perception challenges across diverse and noisy environments. Our mission moves fast, demands creativity, and requires engineering excellence at every layer of the stack. Job Duties Build and refine perception pipelines leveraging multi-sensor inputs including camera, IMU, and audio sources Deploy computer vision and ML models tailored for low-latency, compute-limited embedded environments Develop and implement audio-enhanced detection and localization methods using microphone arrays or acoustic sensors Lead the data lifecycle, including collection, annotation, training, validation, and field testing Architect robust real-time sensor fusion frameworks for state estimation and situational awareness Integrate and bring up sensors (cameras, IMUs, microphones) while writing and optimizing low-level drivers Prototype, evaluate, and iterate rapidly through live field trials in outdoor operational settings Partner closely with controls, embedded, and hardware engineers to ensure system-wide coherence Build tooling for visualization, logging, replay, and real-time debugging Contribute to perception strategy and influence the ongoing roadmap for autonomy and intelligence Qualifications 3+ years of professional experience developing ML/CV-based perception systems for robotics, autonomy, or embedded products Demonstrated success deploying vision or ML models into constrained, real-time environments Strong proficiency in Python and C++ for research and embedded development Applied experience with object detection, classification, tracking, and related CV workflows Hands-on background with sensor fusion techniques (EKF/UKF or similar) using camera + IMU data Exposure to acoustic or audio-driven sensing methods Familiarity with embedded inference platforms such as NVIDIA Jetson, Coral, or comparable systems Ability to bring up hardware, debug drivers, and tune systems directly on embedded devices Preferred Experience Experience working on unmanned systems, robotics autonomy, counter-UAS, or advanced defense hardware Understanding of model compression techniques (quantization, pruning, TensorRT optimization) Knowledge of acoustic localization, filtering, and triangulation methods Prior contributions within early-stage or fast-iteration engineering teams Background with real-time, safety-critical, or mission-driven embedded systems Why Join Us Opportunity to serve as a key technical leader and founding contributor Build real autonomous systems that move from concepts to field demonstrations quickly High-trust engineering environment with fast decision cycles Meaningful influence on technical direction, product strategy, and culture Work on technology that directly contributes to protecting people and infrastructure Competitive equity offering Strong PTO and flexible working environment Relocation support for candidates moving to Austin Long-term growth and leadership opportunities as the company expands Compensation Details $120,000 - $210,000 #LI-AV

Who We Are: Nexus Water Group is a leading regulated water and wastewater utility serving more than 1.3 million people across 20 U.S. states and 2 Canadian provinces. "Nexus" means connection. Through the essential water and wastewater services we deliver, we have a very personal connection to the people, businesses, and communities we serve. This is why our operations are locally led and managed. Every day, over 1,300 professionals deliver vital, safe, and reliable service through over 670 water systems and 360 wastewater systems. What We Offer: * Paid Time Off: Starting at 3 weeks annually along with 11 company-paid holidays. * Health and Wellness Benefits: The first day of the month after your start, you'll have access to your health, dental, prescription and vision benefits to help you stay well. * 401(k) Program with Matching Contribution: We offer a 100% match on contributions up to 4% of your salary, plus an additional 3% employer contribution. * Grow With Us: Professional development opportunities through training, professional certifications, and education allowance. * Additional Benefits: Other great benefits include company provided life insurance and Employee Assistance Program just to name a few. Overview: The Construction Inspector is responsible for the monitoring, inspections, and reporting of quality and performance of capital improvement projects. This position reports to Director(s) of Engineering and serves as a primary support role for Project Managers. The position has a heavy focus on water and wastewater infrastructure construction including facilities, water distribution, sewer collection systems, and their respective sub trades. Perform project communication and project coordination, perform public works inspections, ensure quality control of materials and methods, maintain construction records and perform reporting, and manage construction contracts. This position's experience and knowledge of the primary responsibilities will be advanced and the Inspector III will work independently. What You'll Do: * Reads and interprets construction contracts, drawings, specifications and other project related documentation to effectively inspect, observe and report on contractor activities and to verify that the work is compliant; informs contractors and/or applicable managers of any deviations in compliance with contract documents or failure to rectify work. * Maintains accurate, up-to-date and factual daily log describing the activities and the work of the General Construction Contractor and/or their subcontractor, including conversations (phone calls, in person, etc.); prepares and submits related daily reports. * Utilizes and maintains the paper and electronic document control systems. * Maintains project record files; prepares deficiency reports and follows up to ensure correction. * Provides oversight on multiple, simultaneous projects; observes and reports on issues impacting the work or the progress of the work. Coordinates with the contractor on daily and weekly schedule tasks in the field and reports any delayed tasks to the Construction Manager. Advises contractor and reports non-compliant work or materials to the Construction Manager. * Conducts site safety inspections * Conducts site inspections for SWPPP compliance * Reviews, verifies, and recommends the quantities contained in the Contractor's monthly application for payment request and makes recommendations to the Construction Manager regarding payment of monthly application, Partial Substantial Completion, Substantial Completion, and Final Completion requests for payment; ensures timely Contractor submittal and Owner payment. * Attends and participates with the Contractor in all routine meetings and inspections as set forth in the Contract Documents and special meetings when requested; assists in responding to impacts and concerns of construction on the local community. * Assist operations staff on an as-needed basis for new service taps To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. What You'll Bring: Education * A high school diploma or equivalent with five (5) years related experience and/or training; or equivalent combination of education and experience is required. Experience * Experience providing inspections on projects for utilities including wastewater treatment plants, sanitary sewer lift stations, water treatment plants, booster pump stations, water storage tanks, and underground piping systems * Basic familiarity with a broad spectrum of materials, methods, and processes used in the construction of utility projects. * Knowledge of Microsoft Office Suite including Outlook, Excel, Word, and Project. Familiarity with utilizing Microsoft SharePoint and/or AutoDesk Construction Cloud is a plus. License * Valid Texas Driver's License with insurable driving record is required. Preferences * An ACI and/or ICC certification is preferred

Job Title: Engineering TechnicianJob Description The Electrical Engineering Technician will be responsible for testing and assembling UAVs, maintaining and upgrading the current fleet, and working on new builds. Responsibilities + Assemble and integrate electromechanical systems for UAV platforms, including wiring, connectors, and structural components. + Fabricate and route wire and cable harnesses according to engineering drawings and industry standards. + Perform functional and continuity testing on electrical systems and subsystems. + Troubleshoot and repair electrical and mechanical issues during assembly and testing phases. + Maintain accurate documentation of assembly processes and test results. + Collaborate with engineering teams to ensure compliance with design specifications and quality standards. + Support continuous improvement initiatives for assembly and testing workflows. Essential Skills + Proficiency in using test equipment and performing electrical assembly. + Experience with electrical design and electromechanical systems. + 3+ years of experience in testing and assembly. + Experience with wire and cable harnesses. + Mechanical knowledge and skills in addition to primarily electrical experience. + Ability to read and interpret engineering drawings, schematics, and wiring diagrams. + Familiarity with Electrical, Schematic, Hardware, and AutoCAD Electrical. Additional Skills & Qualifications + Bachelor's degree in Electrical Engineering preferred, but equivalent experience will be considered. + Design experience is preferred. Work Environment The role is based in a test ranch and manufacturing facility, offering a cool start-up environment where you will have the opportunity to design an aircraft from start to finish. Job Type & Location This is a Contract to Hire position based out of Buda, TX. Pay and Benefits The pay range for this position is $28.00 - $48.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Buda,TX. Application Deadline This position is anticipated to close on Dec 18, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

 Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success - join us today!  UCT is looking for a talented Engineer I, IT Supp to join us in Austin, TX!   The Engineer I, IT User Supp has the responsibility of overseeing all aspects of Information Technology Support Services, which includes managing and supporting desktops, laptops, communication hardware/software, and office systems. Essential Duties and Responsibilities: Respond to requests for IT assistance via phone, internal ticketing system, and email Excellent verbal and written communication Perform on/off boarding of Active Directory accounts via PS scripts. Identify and escalate situations requiring urgent attention. Diagnose and resolve hardware and software issues Assist with user training. Activate and configure iOS devices. Participate in the on-call rotation to support other sites Track and route problems, requests, and document resolutions Inventory management of firm hardware, software, and accessories Miscellaneous IT tasks and duties, as required Rolls out hardware and software to ensure optimal deployment of resources Plans, implements, and supports the network and computing infrastructure plan Troubleshoot user-reported software issues and assist in the successful resolution of those issues. Ability to install and repair CAT5/6 cabling and connections Prioritize work and address multiple tasks concurrently Ensure each client you speak to is extremely happy and satisfied, providing the best customer service. Create trouble tickets, receive troubleshooting requests, and create reports. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Knowledge, Skills and Abilities: 3+years of current experience in desktop support on a medium to large-size network. Understanding of Windows 2019 Domain environment, Active Directory, servers, desktop systems, and communications devices using current technologies. Technically adept with experience or interest in supporting customers. Outstanding verbal and written communication skills. Punctual and respectful of others' schedules and meeting deadlines promptly. Demonstrated knowledge of Microsoft Office and desktop products. Demonstrated ability to support networked printers, photocopiers, scanners, and multifunction devices. Demonstrated knowledge of setting up remote access for users. Ability to manage priorities and expectations in a fast-paced environment. Highly organized team player. Ambitious, Goal Driven, and possess a Positive Attitude. Dependable transportation and valid driver's license. Educational/Certification Requirement: Desired Qualifications/Skills: Basic knowledge of VOIP systems. Basic knowledge of physical Ethernet cabling. Basic knowledge of shared storage (NAS/SAN). Basic knowledge of ethernet networks. Bachelor's degree (or equivalent experience) in computer science or related field. Experience Requirement: Work Experience: Physical Demands and Working Conditions: This section is required for compliance with the Americans with Disabilities Act (ADA) Criteria: Work Environment: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Works in a manufacturing environment. Physical Demands: Ability to kneel, reach, walk, push, pull and grasp. Ability to lift up to 50 lbs. Ability to move arms, hands, and fingers Ability to sit for sustained periods. Required to wear personal protective equipment. Prolonged sitting with some standing and bending intermittently during work hours. Subject to interruptions. Environmental Exposure: Required to wear personal protective equipment where applicable. Subject to frequent interruptions. The ability to talk on the phone and use a computer for extended periods may be required. May involve exposure to moderate noise levels from printers, faxes, computers, etc. Overnight Travel: Work may require out-of-town travel depending upon assignment (training and meeting). Ultra Clean Technology is proud to be an equal-opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.