Controls technician jobs in McAllen, TX

Details Sign on Bonus Available! Department: Cath Lab Schedule: Full-time Days Hospital: Seton Medical Center-Williamson Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Responsibilities Assist with procedures and provide diagnostic aid by conducting organ or body scans on patients. Prepare and position patients and select anatomic and technical parameters accurately. Prepare and administer contrast media and medications within the accepted scope of practice and applicable state and federal regulations. Observe patient during procedure and report abnormal activity. Monitor protocols and recommend updates or refinements as warranted. Follow radiation safety procedures and guidelines. Able to perform all specialized imaging procedures such as angio, complex vascular and nonvascular interventional and therapeutic procedures, along with assisting the Radiologist/PA. Ensure all activities comply with regulatory agency standards. Requirements Licensure / Certification / Registration: BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. Radiologic Technologist credentialed from the Texas Medical Board obtained prior to hire date or job transfer date required. One or more of the following required: Registered Cardiovascular Invasive Specialist credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date. Cardiographic Tech specializing in Electrophysiology credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date. Radiologic Technologist specializing in Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. ARRT-VI, ARRT-CI and ARRT-CV also accepted. Advanced Life Support preferred. American Heart Association or American Red Cross accepted. Pediatric Advanced Life Support preferred. American Heart Association or American Red Cross accepted. Education: High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. Additional Preferences No additional preferences. Why Join Our Team Ascension Seton, based in Austin, Texas, has provided thousands of associates and caregivers a rewarding career in healthcare since 1902. Ascension Seton operates more than 100 clinical locations in Central Texas and four teaching hospitals, including Dell Seton Medical Center at The University of Texas and Dell Children's Medical Center. Join us and create a career path you will love. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Equal Employment Opportunity Employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

What we provide: This is a seasonal position at Six Flags Over Texas, in Arlington, TX. It features a competitive hourly rate with perks, such as free entry to any Six Flags Park for all employees with each visit, additional complimentary tickets for friends and family, discounts on food and merchandise for all employees, flexible scheduling and weekly pay available. What you will do: Six Flags Over Texas is looking for a dedicated, organized individual to join the Entertainment Technical Services Team. As an Entertainment Technician, you will be responsible for assisting with the load in and load out of various show products and equipment, running assigned tracks for stage productions and special events, assisting with the installation and maintenance of all sets, props, sound, lighting and video equipment as needed, and working closely with the Technical Services team and Production Staff on any technical services projects as assigned. This individual will also ensure the smooth and safe operation of the assigned shows and special events. How you will do it: Perform daily operational duties to assist the department in the running of assigned show tracks Perform regular inspections of all scenic elements, audio and lighting systems, and special effects (fog machines) Repair and correct any issues quickly and safely to ensure a safe guest and team experience Assist the Technical Services team with new builds and repairs, load ins and load outs, system maintenance and other projects as assigned Effectively communicate with Entertainment Technical Services Leadership on any issues or safety concerns as they arise Operate various tools (including power tools), vehicles and equipment as assigned Adhere to safe work practices and policies that promote a safe work culture for the department and park Must be available to work weekends and all technical rehearsals, as assigned Must be available to work extended hours during specific times of the year Must be able to follow directions provided by the Technical Leadership team What you will need: Must be at least 18 years old. Must be able to work flexible hours on weekends during show and event operations as well as during tech rehearsals as needed Previous technical experience in the Entertainment/ Theme Park Industry preferred Must have some experience in carpentry, construction, or set building as well as some sound and/ or lighting experience Should be proficient in the use of hand tools and various construction equipment or be able to learn quickly Should have a basic knowledge of digital audio and lighting signal flow and be willing to learn the specific equipment used for each show and special event Strong motivated team player with a strong ability to multi-task Strong, verbal and written communication skills Must be able to work on projects independently as well as with a team Must ensure compliance with standard operating procedures, park policies, and regulations Must be able to move or lift tools or equipment weighing up to 50lbs Must be able to work indoors and outdoors in all types of weather conditions Should be able to work at heights of 20 feet or more and occasionally work at heights of up to 100 feet via catwalks, ladders and personnel lifts Valid driver's license to operate company vehicles, if assigned Other Notes: Reports to the Technical Services Supervisor or Lead and/ or the venue stage manager during the run of production or event Must be able to perform all other duties assigned or necessary to support the park operation as a whole Licenses & Certifications Valid Texas Driver's License

We put the unity in "opportunity." Opportunity Snapshot: Compensation: $65.00/hour Work Schedule: 7/7 or 8/6 Rotation (Nights) Assignment Duration: Long term, 12 months + Benefits: Comprehensive insurance with 401K, PTO and Holidays Qualifications: Associates degree preferably enhanced by related technical school courses Experience in maintaining electrical systems and Instruments and Controls in processing plant or offshore production plant. Lineman/Journeyman background Powerline experience is required Familiar with regulations applicable to the operations of oil and gas facilities, OIMS systems, related manuals, and procedures Meets the safety, administrative, and technical training requirements associated with this position as documented in the company operations-approved training roadmap Possesses the general competencies and Operations Integrity Critical competency requirements as documented and maintained in company Operations Training roadmap Computing skills Safety orientated Good communication skills. Good organizational and reporting skills Attention to details. Good troubleshooting and analyzing skills High school diploma or GED required Responsibilities: Plans, updates, and oversees all activities within his or her areas of responsibility according to the laws, regulations, standards, specifications, and procedures. Special emphasis must be placed on health, safety, and the environment Supports and encourages team effort between operations, engineering, and projects groups Provides input and reviews the electrical and control specifications and work practices Responsible and accountable for electrical and control systems as defined in the Work Management Manual Has the knowledge to apply and follow work permits through Permit To Work System (PTWS) as discussed in the Work Management Manual Ensures the quality and timely completion of work scheduled by the Maintenance Program Develops personal and team technical skills (for example, new regulations, equipment, methods, and others) Attends and instructs (as needed) technical meetings, to keep instrument and electrical technicians informed of the latest specifications, codes, procedures, and technology Develops and maintains open communications on control issues (for example, safe work practices, training, materials, and others) with co-workers Supports work prioritization to maximize effectiveness and to complement the efforts of other work groups Provides technical support to other Technicians for maintenance and troubleshooting on company's instrument and electrical systems Generates Management of Change requests (MOCs) on electrical and control-related equipment and installation and can follow up with installation inspections consistent with Operations Integrity Management System (OIMS) Element 3 Constructs, monitors, and inspects new installations for their consistency with the mission and recommend upgrades as necessary Acts as a stand-in for the Instrument and Electrical Lead position as needed The Bergaila Way: The Bergaila Companies is a nationally recognized leader in providing staffing services to all sectors of the energy industry. We continually focus on partnering with talented professionals, engineering the perfect fit between our clients and employees. Choosing a career path with Bergaila grants you immediate access to nationally recognized organizations we partner with. Bergaila consistently attracts and retains its Employees with our dedicated internal service team, top tier benefits programs for contractors and their families, and commitment to place you in the desired career of your choice. Client Overview: Our Client is an American energy company operating principally in the U.S. and Canada, that specializes in the drilling and production of unconventional oil and natural gas assets. Our client has a reputation for efficient resource development, environmental stewardship and community involvement, with a drive to meet the growing challenges of the domestic natural gas industry.

Pay: up to $32/hr o w2 (No C2C or 3rd parties) We are seeking a highly skilled and detail-oriented Laboratory Instrument Technician to support the calibration, qualification, and performance maintenance of laboratory equipment. This role is essential for ensuring data integrity, regulatory compliance, and operational efficiency across our lab systems. Key Responsibilities: Perform routine and scheduled calibrations of laboratory instruments (e.g., HPLC, GC, balances, spectrophotometers). Execute preventive maintenance and performance checks in accordance with SOPs and manufacturer specifications. Lead and support instrument qualification activities (IQ/OQ/PQ) for new and existing equipment. Collaborate with QA and IT teams to implement and maintain Computer System Validation (CSV) and Computer Software Assurance (CSA) protocols. Troubleshoot equipment issues and coordinate repairs or service with vendors. Maintain accurate records of calibration, qualification, and validation activities in compliance with regulatory standards (e.g., GMP, GLP, ISO 17025). Assist in audits and inspections by providing documentation and technical support. Qualifications: Minimum 2-3 years of experience in laboratory instrument calibration and maintenance. Hands-on experience with instrument qualification protocols (IQ/OQ/PQ). Working knowledge of CSV and CSA frameworks in regulated environments. Familiarity with quality systems and regulatory requirements (FDA, EMA, ISO). Strong documentation and organizational skills. Preferred Skills: Experience with calibration management software and electronic documentation systems. Understanding of data integrity principles and risk-based validation approaches. Certification in instrumentation, metrology, or validation (e.g., ASQ CCT, GAMP) is a plus. Other responsibilities as needed: Ensure that lab cleanliness and safety standards are maintained. Develop and qualify new testing methods. Train other analysts to perform laboratory procedures and assays. Perform visual inspections of finished products. Participate in internal assessments and audits as required. Identify and troubleshoot equipment problems. Evaluate new technologies and methods to make recommendations regarding their use. Serve as a technical liaison between quality control and other departments, vendors, or contractors. Coordinate testing with contract laboratories and vendors. Write technical reports or documentation such as deviation reports, testing protocols, and trend analyses. Write or revise standard quality control operating procedures. Supply quality control data necessary for regulatory submissions. Receive and inspect raw materials. Review data from contract laboratories to ensure accuracy and regulatory compliance. Prepare or review required method transfer documentation including technical transfer protocols or reports. Perform validations or transfers of analytical methods in accordance with applicable policies or guidelines. Participate in out-of-specification and failure investigations and recommend corrective actions. Monitor testing procedures to ensure that all tests are performed according to established item specifications, standard test methods, or protocols. Investigate or report questionable test results. Interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data for release. Identify quality problems and recommend solutions. Evaluate analytical methods and procedures to determine how they might be improved. Complete documentation needed to support testing procedures including data capture forms, equipment logbooks, or inventory forms. Calibrate, validate, or maintain laboratory equipment. Compile laboratory test data and perform appropriate analyses. Conduct routine and non-routine analyses of in-process materials, raw materials, environmental samples, finished goods, or stability samples.

A Fort Worth, TX family is seeking a Technology and Facility Controls Engineer to join the engineering team at their private property. We are focused on bringing in a highly technical individual who is eager to learn, has excellent communication skills, and superior problemsolving skills. This is a unique position and with excellent on the job training. The Technology and Facility Controls Engineer will enjoy working on a variety of interesting projects a majority of the time, including: Programming home automation systems - state of the art automation system for a 20,000 square foot house which controls lights, security, showers, pool, fountains, shades, and anything else you can imagine Managing and standardizing over 50 iPhones, iPads, Apple TVs, and other tablets Setting up laptops, PC's and other computing equipment Testing and programming home audio systems Installing dashboard cams in a fleet of 10 cars Maintaining over 20 Access Points for a large Wi-Fi network spanning 7 acres Setting up and testing surveillance equipment (e.g. IP cameras, thermal cameras, security beams) On-site working hours are Monday through Friday, 8:00am to 6:00pm and occasional after-hours / weekend work as needed Traveling to other properties across the country for IT set-up and maintenance The successful candidate will also help support the family and engineering team with a variety of complex technical issues facing the property, including: networking design and maintenance, scripting, SAN management, backup systems management, MS Exchange administration, disaster recovery systems, home/office automation systems, antivirus/security management, videoconferencing support, media production support, and other complex system administration tasks. A general knowledge of Windows and iOS would be helpful. Additionally, the successful candidate will: Be offered up to 20% over current compensation or any current offers AND be paid a $25,000 signing bonus for a three-year commitment. Have a bachelor's degree in Computer Science, Software Engineering, or other Engineering or related field. Will have demonstrated a strong interest and background in technology. Be able to commit to the position for at least two years. Will have one to five years of work experience after college.

Oracle Business Analyst 6+ month contract Downtown Dallas, TX (Hybrid) Primary responsibilities of the Oracle Technical Business Analyst include overall coordination and follow up of requirements gathering for Data Management related projects, writing Business Requirements as needed for Agile projects, along with assisting in writing Technical Design and Data Lineage Documents. This candidate will also be responsible for tracking the progress of projects and related tasks, which will include tracking follow-ups from meetings and scrums, assessing the status of related JIRA tasks and coordinating planned releases. Responsibilities Liaison between business users and technical team Schedule business requirements sessions, document meeting minutes and track follow-ups Write Business Requirement Documents Assist with Technical Design and Data Lineage Documents Ensure Technical Design addresses the Business Requirements Effectively track the progress across projects and ensure business requirements are being followed Coordinate planned releases and send out release announcements Assist in creating, tracking and following up on JIRA tickets Conduct Stakeholder Interviews and facilitate meetings for requirements elicitation Ability to work in a team-oriented, fast-paced agile environment managing multiple priorities Qualifications 4+ years working as an Oracle Technical BA 4+ years working on Agile projects 4+ years of SQL experience (Oracle and SQL Server, MongoDB a plus) 4+ years of Data Analysis/Trouble shooting 4+ years writing Business Requirement, Technical Design and Data Lineage Documents Ability to interpret business requirements into technical requirements Strong Meeting Facilitator Must be able to multi-task effectively Great organizational skills Excellent communication skills Estimated Min Rate: $75.50 Estimated Max Rate: $99.00 What's In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh's network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh's extensive talent community that will provide you with access to Yoh's vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week) Health Savings Account (HSA) (for employees working 20+ hours per week) Life & Disability Insurance (for employees working 20+ hours per week) MetLife Voluntary Benefits Employee Assistance Program (EAP) 401K Retirement Savings Plan Direct Deposit & weekly epayroll Referral Bonus Programs Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit ************************************************ to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh's hiring clients' preferences. To learn more about Yoh's privacy practices, please see our Candidate Privacy Notice: **********************************

Great new opportunity for an Industrial Electrician! The ideal applicant will perform maintenance and repair operations necessary to keep plant, equipment, machinery and tools in good operating condition, working in the many diversified capacities required in electrical maintenance. Make all necessary mechanical repairs to electrical equipment, including the replacement, repair and installation of bearings, gears, shafts, pins, couplings, etc. Analyze all types of circuits, wiring diagrams and drawings as required to install, repair, adjust, calibrate, program, time, construct, modify or service all types of materials and electronic or electrical tools. Designs, installs, troubleshoots and implements programs for programming logic controllers, calibrate, program, design, test and adjust any type of integrated, indicating or graphic electrical or electronic instruments or controllers, pressure and flow meters, combustion control equipment, regulator, timing devices, pyrometers. Detect and report faulty material, environmental hazards, and/or improper operation of plant equipment or machinery; refer questionable and unusual matters to proper supervision. Follow all safety regulations and practices. The above statements are intended to describe the general nature and level of work being performed by people to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills of personnel so classified. Requirements High School/GED required. 2+ years working in an industrial environment on a mechanical maintenance craft. Experienced working in extreme weather conditions. Willing to climb, bend, stand, or lift items. Strong mechanical aptitude. Must be able to pass a written test, Face-to-face interview, and a hands on assessment. Wages & Benefits Optimus Steel has a competitive benefit package. Medical/Prescription Dental, Vision, Health & Dependent Care FSA 401K, Company match Basic Life/Accident Insurance Employee Assistance Program Salary Description $35.37 - $44.77 Per-hour

Engineering Technician Compensation: $30 - $40 /hour, depending on experience Inceed has partnered with a great company to help find a skilled Engineering Technician to join their team! Join a dynamic and innovative team as an Engineering Technician. This exciting opportunity involves working onsite in New Albany, Ohio, where you'll play a crucial role in supporting engineering projects. The company offers a collaborative atmosphere and values professional growth, making this an ideal opportunity for someone eager to advance their career. Key Responsibilities & Duties: Utilize Spotfire or Power BI for data visualization Query data using Python and SQL Collaborate with engineering teams to support project goals Assist in data analysis and interpretation Maintain accurate records and documentation Contribute to technical problem-solving efforts Support onsite engineering activities Required Qualifications & Experience: Proficiency in Spotfire or Power BI Experience with Python for data querying SQL querying skills Internship or relevant experience in a technical field Strong analytical and problem-solving skills Nice to Have Skills & Experience: Experience with data visualization tools Familiarity with engineering projects Knowledge of additional programming languages Perks & Benefits: 3 different medical health insurance plans, dental, and vision insurance Voluntary and Long-term disability insurance Paid time off, 401k, and holiday pay Weekly direct deposit or pay card deposit If you are interested in learning more about the Engineering Technician opportunity, please submit your resume for consideration. Our client is unable to provide sponsorship at this time. We are Inceed, a staffing direct placement firm who believes in the possibility of something better. Our mission is simple: We're here to help every person, whether client, candidate, or employee, find and secure what's better for them. Inceed is an equal opportunity employer. Inceed prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Adecco Creative and Marketing has partnered with a timepiece designer to hire an Archives Specialist. Job Title: Archives Specialist Schedule: 20 hours/week, no OT Duration: 6-12 weeks Pay Rate: $25-$30/hr (based on experience). This is W2, not 1099. We are seeking a talented Brand Archives Specialist to join our team. In this role, you will support the documentation, preservation, and organization of historic watch collections. An ideal candidate will possess a strong attention to detail, a librarian mindset, and a passion for cataloging and maintaining archival systems. What you will do in this role ● Catalog watches and accessories by documenting product details, features, materials, and release information ● Maintain and update archival databases to ensure accuracy and accessibility ● Organize physical archive inventory, including labeling, storage, and preservation of items ● Support digitization of archive materials, including product photography and metadata entry ● Assist with archival research and improvement of organizational systems ● Ensure proper handling and care of vintage and delicate products Who You Are ● Bachelor's degree or equivalent experience in Library Science, Museum Studies, Archival Studies, History, or related field ● Experience in cataloging, archival work, museum collection support, or similar role ● Strong organizational skills and exceptional attention to detail ● Experience with cataloging systems, metadata standards, or digital asset management tools ● Ability to work independently and manage priorities ● Preferred: familiarity with fashion archives or product collections ● Preferred: experience with photography for cataloging Fine print: This is a W2 position. Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. There is no PTO or holiday pay for contracts. Sick leave is accrued where applicable, check your state laws. Equal Opportunity Employer/Veterans/Disabled Must be authorized to work in the U.S. without employer sponsorship. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ******************************************* The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: *The California Fair Chance Act *Los Angeles City Fair Chance Ordinance *Los Angeles County Fair Chance Ordinance for Employers *San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Ready to take your EEG skills on the road? Join SynapseTBI, a fast-growing neurodiagnostics team, and bring life-changing testing to patients across the country. We're looking for a motivated Ambulatory EEG Technologist who loves patient care, enjoys flexibility, and is excited about a career that blends healthcare with travel. Company Description SynapseTBI offers a comprehensive protocol of objective diagnostic testing for the diagnosis of Traumatic Brain Injuries (TBI), Mild Traumatic Brain Injuries (mTBI), and Post Concussion Syndrome. Recommended and validated by the American College of Occupational and Environmental Medicine (ACOEM) for "Post TBI Patients who either have symptoms of cognitive deficits and/or have sustained a TBI sufficient to cause same", our services also include neurologist consultations, recommended treatment plans, psych evaluations, in-home TBI treatment programs including Neurofeedback, and life care plans. Role Description This is a travel role for an ERP/EEG Technician, primarily covering the Midwest Regions, preferably based in Texas. The EEG Technician will be responsible for performing Neurodiagnostic Testing, assisting with epilepsy and neurophysiology studies, ensuring patient care, and working closely with medical professionals to conduct diagnostic tests, assessments and treatments. What You'll Do: ✨ Travel to patient homes, clinics, and partner sites to set up and remove ambulatory EEG studies and/or run ERP testing along with other TBI diagnostic studies ✨ Apply electrodes and ensure clean, accurate data collection ✨ Teach patients and families how the test works and answer their questions with confidence ✨ Keep equipment in top shape and maintain detailed study records ✨ Represent our company with professionalism, compassion, and a patient-first mindset What We're Looking For: ✔️ EEG experience preferred, but not required (we will teach the testing for the right candidate) ✔️ Someone that works well on their own and doesn't require a micro-manager ✔️ Credentialed techs (R. EEG T.) a plus - but not required ✔️ Someone flexible, detail-oriented, and ready to travel ✔️ Strong communication skills and a passion for helping patients ✔️ A valid driver's license and reliable transportation required Why You'll Love It Here: 🌎 Travel nationwide with all lodging and travel expenses covered 💰 Competitive salary + a comprehensive bonus plan 🩺 Full benefits (health, dental, vision, PTO) 📈 Ongoing training and career growth opportunities 💡 Work with a supportive team that values your expertise If you're looking for a career that takes you beyond the walls of a hospital and gives you the chance to explore new places while making a difference in patients' lives-this is it.

/RESPONSIBILITIES Provides and administers competent Hyperbaric Medicine services to patients as prescribed by the Physician. Responsible for safe and effective operation of the hyperbaric chamber(s) and related support systems. Responsible for the safe delivery of hyperbaric oxygen therapy to the hyperbaric treatment. Provide care in accordance with age specific guidelines for each age group as evidenced by the skill/competency checkoffs. Comply with departmental and University Health policies/procedures, and maintain good relations with co-workers and guest. EDUCATION/EXPERIENCE High school diploma or equivalent (GED) required. Wound care center operator must be a healthcare professional actively certified or licensed in one of the following vocations to meet the minimum education and experience requirements: (Respiratory Therapist, Military: Corpsman or Medical Services Specialist, Emergency Medical Technician or Paramedic, Licensed Practical Nurse, Licensed Vocational Nurse, Certified Hyperbaric Specialist, Certified or Registered Medical Assistant, Certified Hyperbaric Technologist, Certified Nursing Assistant, Certified Hyperbaric Wound Specialist, Physical Therapist or Physical Therapy Assistant, other allied healthcare professions as approved by NBDHMT for certification eligibility, individuals who have successfully completed U.S. Department of Defense (DOD) hyperbaric training. Successful completion of a certification program in Hyperbaric Medicine is required by the National Board of Diving and Hyperbaric Medicine Technology, Department of Defense, American College of Hyperbaric Medicine, or Undersea & Hyperbaric Medical Society is required. Must have current American Heart Association, Basic Cardiac Life Support and Healthcare Provider card. ACLS preferred. Maintains competencies, continuing education, and certifications as appropriate. One year of experience required. Must have completed approved Hyperbaric Safety Director Course or attend within 6 months of employment.

At Trane TechnologiesTM and through our businesses including Trane and Thermo King, we create innovative climate solutions for buildings, homes, and transportation that challenge what's possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go. What's in it for you: Be a part of our mission! As a world leader in creating comfortable, sustainable, and efficient environments, it's our responsibility to put the planet first. For us at Trane Technologies, sustainability is not just how we do business-it is our business. Do you dare to look at the world's challenges and see impactful possibilities? Do you want to contribute to making a better future? If the answer is yes, we invite you to consider joining us in boldly challenging what's possible for a sustainable world. Thrive at work and at home: * Benefits kick in on DAY ONE for you and your family, including health insurance, and holistic wellness programs that include generous incentives - WE DARE TO CARE! * Family building benefits include fertility coverage and adoption/surrogacy assistance. * 401K match up to 6%, plus an additional 2% core contribution = up to 8% company contribution. * Paid Time off with up to 9 paid holidays,15 vacation days and paid leave in support of volunteer and parental leave needs. * A regular schedule (with overtime opportunities) and most workdays you'll be dispatched from your house. * Educational and training opportunities through company programs to keep you on top of technical innovations including Manufacturer (OEM) Level Training along with tuition assistance, and student debt support. * Knowledge support from the factory is a nationwide communications hub so that you have what you need to get the job done right the first time. * Premium equipment such as a late model, clean, and dependable company vehicle, high speed laptop, smartphone, specialized tools, uniforms, PPE and safety boot allowance. * Learn more about our benefits here! Where is the work: Customer Facing Sales & Service Work: Work will be performed in and around the Weslaco, TX area. Prioritize engaging with customers; when not directly interacting with customers, enjoy the collaborative environment of our regional sales office. What you will do: * Responsible for commissioning, programming, setting up graphics, communications link, end to end testing, troubleshooting and servicing on assigned projects. * Responsible for documenting point to point verification, sequence of operations validation and job close out requirements. * Represents the company by serving as the direct customer contact and is responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer's location. * Coordinates with team leader and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work. * Keeps current on Trane products concerning installation, operation, maintenance, service, and repair of direct digital control systems. * Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions. * Displays team effort and dedication to customers by maintaining flexibility to work overtime and weeks as the business requires, including occasional overnight stays. What you will bring: * A High School Diploma or equivalent required, and typically at least 3-5 years of experience in HVAC/Controls. Technical School or formal training is preferred. * Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad). * Must possess a valid driver's license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: * DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years. * Previous experience with DDC controls system preferred. Additional Requirements and Environmental Exposure: * Must be able to safely and legally operate a vehicle using a seat belt * Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties * Must be able to twist the trunk of your body 90 degrees in each direction * Must be able to squat and touch the floor with both hands * Must be able to reach your hands over your head * Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours * This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs. * Must be able to safely use a ladder with a 375 lb. total weight limit, while carrying equipment of 50 lbs. or less * Must be able to maneuver confined access areas, as small as 30" vertical x 45" horizontal * Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15' to 20', and occasionally, up to 50 feet + * This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location This role has been designated by the Company as Safety Sensitive. Compensation: Base Pay Range: $23-42/hour Disclaimer: This base pay range is based on US national averages. Actual base pay could be a result of seniority, merit, geographic location where the work is performed. Equal Employment Opportunity: We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************

JOB DETAILS Starting Base Pay: $35.00 per hour Day Shift: 6:00 am - 2:30 pm DUTIES AND RESPONSIBILITIES Safely troubleshoot, change, install and commission all components of instrument control and electrical systems Troubleshoot, analyze and repair components of these systems: motors, MCC's, VFD's, transformers, switch gears, lighting, relays, Programmable Logic Controllers,(Allen Bradley preferred), overhead crane controls, distribution system wiring and running conduit, instrumentation, control valves, DCS Systems, controllers, HMI's, UPS Systems, and similar equipment Ensure compliance of applicable Safety Standards and procedures Troubleshoot and repair electrical equipment Execute equipment repair procedures Ensure good housekeeping in work areas Enter equipment repair history and close out work orders Update repair procedures if needed Qualifications Minimum of 5 years of experience as an Electrical Controls Technician in an industrial manufacturing facility Demonstrated commitment to electrical safety, strong troubleshooting skills, decision making skills, problem analysis and conflict management skills, particularly in pressure situations Power Distribution Systems Medium Voltage troubleshooting and repair (480 VAC) (750VDC) Electrical Testing (Insulation Integrity, Partial Discharge, etc.) Knowledge of NFPA 70E, NEC and applicable OSHA standards Transformer Maintenance and Testing Three Phase Motors DC Motors and Motor Controls Servo Motors and Controls Hydraulics Experience Pneumatics Experience Programmable Logic Controllers (PLC's) Human Machine Interfaces (HMI's) Variable Frequency Drives (VFD's) (AC/DC) Communication Protocols (Ethernet, ControlNet, Device Net, etc.) Analog Circuits (0-10VDC, 4-20mA) Uninterrupted Power Sources (UPS systems) Motor Control Centers (MCC's) Electrical Area Classification Proficient in reading and understanding electrical diagrams and technical manuals Ability to lift up to 50 pounds on a continual basis above shoulder height and below the waist Additional Information Site Address: 14031 West Hardy Road, Houston, TX 77060 This is a position with the potential overtime. The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play . Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here . You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here . If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at ************ or [email protected] . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at ************ or [email protected] . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Essential Duties and Responsibilities: Read, understand, and interpret schematics, P&IDs, sketches, and written instructions to assemble parts or products as well as operations of equipment. Assembles and tests subsea production control system and drilling control HPUs, subsea distribution hardware & assemblies according to company, customer and industry specifications. Ensures that safety is of the utmost priority when operating, assembling and testing equipment. Participates in Deepsea Technologies Safety and Quality observation programs. Ensure that quality process and procedures are followed. Performs maintenance and operations of rental equipment both onshore and offshore. Performs fluid analysis on various types of control fluids and / or chemicals. Perform both High Voltage and Low Voltage terminations and diagnostics. Troubleshoots problems, identifies and communicates design discrepancies. Identifies and suggests design improvements. Completes required documentation, including but not limited to: daily progress reports, service tickets, test reports, failed test reports and Non-Conformance Reports. Prepares test procedures and operations / maintenance manuals in accordances with customer and industry standards and specifications Domestic and international travel required. Must have a valid passport. Perform various diagnostics tests on long electrical conductors and fiber optic cables. This may include TDR, OTDR, CR, IR, etc… Install Fiber Optic Connection end terminations. Requirements Education and Experience: 5+ years experience in assembling, operations and testing of HPUs for subsea production control and drilling control applications, subsea subsea distribution systems. Minimum of 2 years in an electrical service technician role offshore. High school diploma or GED; technical/vocational electrical training or related experience. Mid level of expertise in assembly and testing of Electro-Hydraulic Power and Control units, subsea distribution equipment and drilling control systems. Ability to read and interpret engineering drawings & BOMs, P&IDs; wiring diagrams and all written engineering procedures; Offshore safety and certification required. Ability to use a computer and Windows Office software. Job Knowledge, Skills and Abilities: Excellent communication skills and ability to work harmoniously on multifunction teams; Ability to balance customer demands against company constraints; Impeccable reputation and high ethical standards; Self-motivated and willing to take initiative with limited direction. Strong understanding of electrical operations and componentry Ability to operate forklifts and overhead cranes Physical Demands: Physical requirements are those typically found in an office and manufacturing shop environment. Must be able to pass an Offshore fit for duty physical. Personal Protective Equipment: Safety glasses and other PPE as required to work in a manufacturing environment. Additional PPE may be required at certain offshore and international locations.

): As Mechanical Technician will be required to perform routine predictive, preventive and corrective maintenance and repairs for conveyor equipment, production equipment and support facility operations to minimize downtime. As Electrical Technician will be required to perform routine calibration, preventive maintenance and repairs to facility equipment, productions equipment and utilities to support facility operations. Duties and Responsibilities • Operate, troubleshoot, repair, and maintain all mechanical and electrical equipment as required • Trouble shoot problems in the event of equipment failure and recommend parts or solutions for effective repairs (mechanical and/or electrical). • Sets up, calibrate, tests, measure and repair all types of electrical controls, instruments, and electronic components. • Performs mechanical repairs in productions equipment. • Monitors and maintains conveyors, mechanical equipment, controls, and electrical equipment to ensure effective and efficient service. • Works with sanitation crews, guards, catch pans and related items. • Collects equipment operation history and data to facilitate reliability improvements. • Takes corrective action with people, parts, and tools to minimize downtown • Take preventative action with equipment to prolong life • Uses predictive maintenance and historical equipment data to understand and forecasts equipment maintenance, replacement, and performance. • Assist facility technicians and engineers in trouble shooting and diagnostic analysis • Utilize instruments, electronic schematics and basic facility tools as needed. • Read, writes, and assess drawings and mathematical formulas to determine equipment problems. • Maintain and control work order system and spare parts inventory. • Develops operating procedures for facility equipment to ensure consistent and safe operation. • Trains and develops other employees in performing preventive maintenance and routine equipment service activities • Must follow all instruction related to Food Defense, Good Manufacturing Practices, and HACCP program. Everyone at STS must report to the Food Safety Department or their direct supervisor any problem or irregular situation related to food safety. • Responsible for proper use of all mixing chemicals used in the maintenance process, cleaning/sanitation procedure. • Maintain logs and documents related to food safety. Keeping all MSDS information for the product that they use. • Must be willing to work overtime weekends, holidays and varying/rotating shifts as required • Perform any operational activities and/or special task and project as required. • Required to comply with and ensure all general safety, OSHA, USDA/APHIS, FDA and State of Texas regulations for position and facility operations. • Must report to the Food Safety Department or their direct supervisor any problem or irregular situation related to food safety. • Enforce security and food safety standards, policies and programs related to HACCP, and third-party standards, regulatory standards, food safety training programs, product inspections, and any work instructions. • Ensure compliance with the Quality & Food Safety Management System in accordance with relevant internal, external standards and regulatory requirements. • Ensure compliance with Good Manufacturing Practices by following GMP protocols. • Ensure compliance to Standard operating procedures to ensure consistency and safety. • Report on deviations on Food safety / Quality / Safety to the supervisor immediately • Perform routine inspections as per standard requirements and timely data entry. • Maintain clean and hygienic work environment. • Participate in Food Safety, Safety and Quality related training Qualifications (specific requirements needed to be qualified for the position) • High School diploma, technical school and/or military training and experience in relevant field (Electrical Tech, Industrial Maintenance, plumbing etc.) • 3-5 years of manufacturing or facility work performing mechanical predictive and corrective maintenance, and performing instrumentation & calibration troubleshooting, mechanical-electrical assemblies. • Understanding of basic machine operations and maintenance items. • Understanding of historical data and equipment forecasting • Critical thinking and problem resolving skills for fixing maintenance issues (Electrical-Mechanical issues) • Mechanical aptitude • Mathematical and numerical skills • Basic computer skills Other Requirements: • Strong attention to detail. • Must speak English. Ability to speak Spanish a plus. • Ability to establish and maintain effective working relationships with other team members and employees. • Ability to read, write and perform mathematical calculations and accurately record data. • Strong common sense • Strong problem-solving skills and sense of urgency to resolve issues. • Must be willing to work overtime weekends, holidays, and varying/rotating shifts as required. • Physical strength and dexterity to move, lift and handle equipment. • Deal with long hours standing or walking. • Ability to work in extreme hot or cold conditions and sometimes working at heights. • Organizational and time management skills • Works independently but in collaboration with other maintenance technicians. • Knowledge of Good Manufacturing Practice. • An energetic team player who is flexible and adaptable. • High level of initiative and works well in a team environment. • Establishes and maintains effective channels of communications all relevant parties. Work Environment and Physical Requirements: (Describe whether exposed to chemicals, indoor or outdoor conditions, confined spaces, heights or other specific work area characteristics). • Reasonable accommodations may be made to enable people with disabilities to perform the essential functions of this job. • The majority of time performing this job is split between a standard office environment and outside in the Facility. • Frequently sits, reach with hands and arms; climb or balance, stand and walk; grasp with hands and fingers and lift up to 15 lbs. • Occasionally bend, twist, push, pull, clime squat, crawl and kneel. • Frequently use computer, telephone, and writing instruments. • A large part of time is spent in a refrigerated area standing and walking. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and vehicles. • The noise level in the operation facility is high. The noise level in the office environment is usually quiet to moderate. The employee must be able to • Move from location to location, operate, detect, diagnose, remove, install, modify, use, and control machinery, equipment, and tools in work environment. • Constantly positions self to maintain, operate and assess equipment, including underneath, inside, besides, and above. • Must be able to frequently ascend and descend spiraling staircases and work in confined spaces. • Must be able to communicate, detect, discern, and hear. • The employee must frequently lift and/or move up to 50 pounds. • This job includes close vision and adjusting focus to detect, discern, operate, and inspect. • The employee is regularly exposed to energized electrical gear, moving mechanical parts, tools, and vehicles. Is occasionally exposed to low permissible levels of ionizing radiation. This position requires access to areas and activities which could be dangerous for people wearing pacemakers and other medical devices. • The constant work temperature averages 41F.

Requirements Minimum Requirements: Associate's degree in electrical engineering or a related field (preferred). Minimum of 5 years of experience as a protection and control technician. OSHA 30 Construction Safety Certification Strong understanding of protection and control principles and practices. Experience with relay testing and commissioning. Excellent leadership and communication skills. Strong teamwork and collaboration skills. Ability to work independently and take initiative. Proven ability to meet deadlines and stay organized. Commitment to safety.

Full-time Description We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock's dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation's most dependable microgrids - all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you'll do… We are seeking a skilled Electrical Technician, Automation & Controls to support the integration, commissioning, and optimization of generator packages and electrical systems within advanced microgrid projects. This role is hands-on and dynamic, requiring expertise in automation, controls, and system performance to help ensure reliable, safe, and compliant operations. This is a field position based out of Houston, Texas and will report directly to the Manager of Automation & Controls Engineering. You'll make an impact by: System Integration & Commissioning Contributing to the integration of generator packages, switchgear, and electrical systems in line with project specifications, safety protocols, and timelines. Carrying out and validate cable schedules, control packages, and system testing protocols. Performing start-up and performance testing activities to confirm operational readiness and safety compliance. Project Execution & Handover Supporting the transition from construction to commissioning and operations teams by confirming integration requirements are met. Tracking and closing punch list items by documenting deficiencies and assisting with resolution. Providing troubleshooting support during early operational phases following system integration. Technical Contribution Assisting in troubleshooting automation, protection, and control systems (e.g., Schneider PLCs, DeepSea Controllers, ABB Relays, SEL devices). Participating in the development and delivery of training for site personnel and contractors on microgrid operations, controls, and start-up procedures. Helping maintain documentation control and reporting, ensuring accurate project records. Collaboration & Reporting Communicating progress and technical findings with project management and integration teams. Using tracking tools to update key milestones, risks, and solutions. Contributing to identifying risks and ensuring compliance with SHE standards, company protocols, and regulatory requirements. Safely preparing, operating, and maintaining a motor vehicle for purposes of conducting company business You'll sweep us off our feet if you: Have strong analytical and have problem-solving abilities in automation and control systems. Are collaborative and effective working style with team members and contractors. Are proactive, self-motivated, and eager to take ownership of tasks. Are flexibile and able to adapt to shifting project requirements and deadlines. Have hands-on background in technical fields related to power generation, electrical construction, and commissioning. Are committed to safety, reliability, and operational excellence Requirements What you'll need: 3+ years of experience in the energy sector (or equivalent electrical experience), with emphasis on power generation, automation, and controls. Associate's degree (desired) in electrical, automation, or related technical discipline. Knowledge of microgrid operations, system integration, and applicable codes/standards. Hands-on experience with control and protection equipment such as: Schneider PLCs, DeepSea 8660 & 8610 Controllers (or equivalent), or ABB 615 Relay, SEL 700G, SEL 700GT, SEL RTAC Experience working across multiple stages of project execution. Physical ability to work in field environments, including adverse weather conditions, lifting up to 50 pounds, and performing physically demanding tasks. Your Rewards! Medical, Dental, Vision, and Prescription Drug Insurance Company-Paid Life Insurance Flexible Spending Account (FSA) Health Savings Account (HSA) Wellness Programs and Incentives 401(k) Retirement Plan & Company Match Paid Time Off - Sick & Vacation Time Paid Holidays Do you have what it takes to join the Enchanted Rock team? Send us your resume today. Be yourself and keep it useful, funny, and cool! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education - to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values, specifically our value of “The Team”, which includes “Mutual Respect, Openness, and Honesty.”

An Electrical Control Technician at Encore Wire will be primarily responsible for the safe rectification of machinery and equipment used in the various production plants and throughout the facility as directed by Supervision or Company dictated equipment priority. The Control Technician must be able to work on all facility wide electrical systems. A good understanding and experience of all mechanical and electrical disciplines is needed, these would include hydraulics and pneumatics. Essential Job Functions * Experience and technical knowledge of the operation of AC and DC drives. * A thorough understanding of speed feedback devices theory and operation. * An understanding of temperature control and temperature components. * A good understanding of PID and control loops. * A good understanding of Ethernet communications and connections. * Proficient in PLC and HMI systems, to include communications drivers and connections, PLC program navigation and controlled manipulation. * A thorough understanding of all electrical components and electronic devices. * Show an understanding and demonstrate the processes involved in diagnosing defective components, motors, drives and electronic components. * Able to demonstrate the ability to use diagnostic equipment. * Experience with selecting electrical components when original OEM components are not available. NOTE: This job description does not contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice.