Controls technician jobs in Orangetown, NY

As an Automation Technician, you will work with the maintenance team to maintain and repair conveyance, automation and facilities equipment to support operations uptime and improve reliability of our systems. This role is the resident expert in mechanical, electrical and/or refrigeration systems. You will.. Lead and educate compliance with all safety, food safety, and security standards. Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed. Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting. Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate. Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment specializing in mechanical, electrical, and refrigeration. Lead root cause analysis of major downtime events. Act as a network resource for technical issues and lead network-wide root cause analysis. Develop maintenance personnel knowledge on intermediate to advanced mechanical, electrical, and refrigeration. Audit maintenance personnel work and provide feedback to improve performance and quality. Audit vendor work to provide feedback to leadership on quality of work and SLA performance. Write and/or modify PMs to standardize across the network and increase effectiveness. Perform building project work as assigned. Mandatory Requirements You have.. 4-6 years of experience with conveyor, automation, robotics, and/or refrigeration repair and maintenance including mechanical and electrical operations. Advanced understanding of machinery and equipment. Basic computer skills. Ability to read and understand drawings, schematics and diagrams. Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems. Ability to travel as necessary (up to 10%) for business purposes. High School diploma or equivalent. Excellent follow through, judgment, and common sense. "Make it happen" attitude. Mechatronics associates degree or equivalent preferred. You'll get... Competitive Salary & 401k company match that vests immediately upon participation Generous parental leave of 4 weeks & PTO policy, as well as paid holidays off $0 monthly premium and other flexible health plans Amazing discounts, including up to 75% off HelloFresh subscription Flexible shift scheduling & advancement opportunities Emergency child and adult care services Snacks & monthly catered lunches Collaborative, dynamic work environment within a fast-paced, mission-driven company This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors. Newark, NJ Pay Range$39.50-$40.25 USD

Benefits: 401(k) 401(k) matching Dental insurance Health insurance Training & development Vision insurance About us: BROAD U.S.A. is a privately held company headquartered in Hackensack, New Jersey. BROAD delivers innovative solutions in three product areas: • Absorption chiller and Electrical chiller • Air Purification, Filtration and Ventilation systems • Modular construction: Holon sustainable modular building system About the role: We are seeking a Building Automation Systems (BMS) Controls Technician to join our growing team. Qualified candidates will work with project managers on designing, specifying, programming and integrating new and existing building management systems. Candidate will also work with technical support & monitoring personnel on ongoing troubleshooting and support. This role is critical to our growing business and ensure our clients achieve energy efficiency and system optimization. Key Responsibilities: • Perform necessary software programming, equipment start-up, tuning and calibration, commissioning and integration of HVAC controls, DDC systems and BMS software. • Conduct preventative maintenance and respond to emergency service calls on existing BMS systems. • Troubleshoot and repair control system installations independently, ensuring performance standards are met. • Effectively communicate with customers to evaluate service needs, maintain proper scheduling and ensure high levels of customer satisfaction. • Monitor customer buildings to ensure optimum performance standards are being achieved. • Be proficient in knowledge of cooling and heating systems. • Identify opportunities for additional building enhancements and perform upgrades and/or small-scale retrofits on existing systems. • Keep updated with industry developments and building control system, particularly in energy-saving strategies and new technologies. • Candidates should anticipate a portion of the time will require travel to customer locations throughout North America. Qualifications: • 2+ years of experience in HVAC control systems and/or building automation, including servicing and commissioning electronic controls. • Strong knowledge of BMS protocols such as BACnet, Modbus, Lonworks, Tridium/Niagara and experience working with Delta Controls, JCI, and Andover based BMS systems • Hands-on experience with system design, integration, and troubleshooting, including both legacy and new systems. • Familiarity with mechanical and electrical systems as part of construction and building automation system. • Ability to work on-site, including in confined spaces, on ladders, and with equipment weighing up to 50 lbs. • Competency in Microsoft Word, Excel, and AutoCAD for creating and managing project documentation. • Preferred Experience working with systems from Delta Controls, JCI, Andover, and Tridium. • Strong organizational, communication, and problem-solving skills. • Ability to manage customer relations and work effectively in a team to meet project deadlines. • Performing other duties as assigned by Project Manager • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related fields is a plus. Benefits: • Competitive salary is based on experience • 401(k) plan with company match • Comprehensive health insurance (Medical, Dental, Vision, Life) • Paid Time Off and company holidays BROAD is an equal opportunity employer Compensation: $50,000.00 - $80,000.00 per year BROAD U.S.A. is a privately held company headquartered in New Jersey, supporting the sales and service to our customers in North America. Relying on our innovative and environmental-friendly technology, BROAD U.S.A commits itself to optimize energy efficiency for clients in Commercial, Civil and Industrial markets. BROAD U.S.A. is committed to the Absorption Marketplace - It is our primary business since we started in 1998 Broad is dedicated and focused on ensuring our owners can always find proper training, service and after sale support with replacement parts and or units. Broad is committed to the inherent value and flexible solutions that thermally driven absorption plays in our modern world. We Roll Our Own - Absorbers Absorption design is our core competency and primary focus Unlike many current players in the absorption market, Broad designed and created its first absorber in 1988 with its own human capital, hard work, the desire to be the best.

Join our dynamic team to navigate complex risk landscapes and fortify technology governance, making a pivotal impact in our firm's robust risk strategy. As a Tech Risk and Controls - Tech Issue Management Oversight & Execution within the Technology Risk & Services team, you will contribute to the successful management of technology-aligned aspects of Governance, Risk, and Compliance in line with the firm's standards. Leverage your broad knowledge in risk management principles and practices to assess and monitor risks and implement effective controls. Your role in risk identification, control evaluation, and security governance is crucial in advising on complex situations and enhancing the firm's risk posture. Through collaboration and analytical skills, you will contribute to the overall success of the Technology Risk & Services team and ensure compliance with regulatory obligations and industry standards. **Job responsibilities** + Assess and monitor technology risks, ensuring compliance with firm standards, regulatory requirements, and industry best practices + Support implementation of effective controls in collaboration with cross-functional teams and stakeholders + Evaluate the effectiveness of existing controls, identify gaps, and recommend improvements to mitigate risks and enhance the firm's risk posture + Analyze complex situations, provide advice on risk management strategies, and support the implementation of risk mitigation measures **Required qualifications, capabilities, and skills** + 3+ years of experience or equivalent expertise in technology risk management, information security, or a related field, with a focus on risk identification, assessment, and mitigation + Experience in risk identification, assessment, and control evaluation, with a strong understanding of industry standards + Demonstrated ability to analyze complex issues, develop and implement risk mitigation strategies, and communicate effectively with senior stakeholders + Proficient knowledge of risk management frameworks, regulations, and industry best practices **Preferred qualifications, capabilities, and skills** + CISM, CRISC, CISSP, or other industry-recognized risk certifications Chase is a leading financial services firm, helping nearly half of America's households and small businesses achieve their financial goals through a broad range of financial products. Our mission is to create engaged, lifelong relationships and put our customers at the heart of everything we do. We also help small businesses, nonprofits and cities grow, delivering solutions to solve all their financial needs. We offer a competitive total rewards package including base salary determined based on the role, experience, skill set and location. Those in eligible roles may receive commission-based pay and/or discretionary incentive compensation, paid in the form of cash and/or forfeitable equity, awarded in recognition of individual achievements and contributions. We also offer a range of benefits and programs to meet employee needs, based on eligibility. These benefits include comprehensive health care coverage, on-site health and wellness centers, a retirement savings plan, backup childcare, tuition reimbursement, mental health support, financial coaching and more. Additional details about total compensation and benefits will be provided during the hiring process. We recognize that our people are our strength and the diverse talents they bring to our global workforce are directly linked to our success. We are an equal opportunity employer and place a high value on diversity and inclusion at our company. We do not discriminate on the basis of any protected attribute, including race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, marital or veteran status, pregnancy or disability, or any other basis protected under applicable law. We also make reasonable accommodations for applicants' and employees' religious practices and beliefs, as well as mental health or physical disability needs. Visit our FAQs for more information about requesting an accommodation. Equal Opportunity Employer/Disability/Veterans **Base Pay/Salary** Jersey City,NJ $114,000.00 - $155,000.00 / year

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Health insurance Training & development Vision insurance About us: BROAD U.S.A. is a privately held company headquartered in Hackensack, New Jersey. BROAD delivers innovative solutions in three product areas: Absorption chiller and Electrical chiller Air Purification, Filtration and Ventilation systems Modular construction: Holon sustainable modular building system About the role: We are seeking a Building Automation Systems (BMS) Controls Technician to join our growing team. Qualified candidates will work with project managers on designing, specifying, programming and integrating new and existing building management systems. Candidate will also work with technical support & monitoring personnel on ongoing troubleshooting and support. This role is critical to our growing business and ensure our clients achieve energy efficiency and system optimization. Key Responsibilities: Perform necessary software programming, equipment start-up, tuning and calibration, commissioning and integration of HVAC controls, DDC systems and BMS software. Conduct preventative maintenance and respond to emergency service calls on existing BMS systems. Troubleshoot and repair control system installations independently, ensuring performance standards are met. Effectively communicate with customers to evaluate service needs, maintain proper scheduling and ensure high levels of customer satisfaction. Monitor customer buildings to ensure optimum performance standards are being achieved. Be proficient in knowledge of cooling and heating systems. Identify opportunities for additional building enhancements and perform upgrades and/or small-scale retrofits on existing systems. Keep updated with industry developments and building control system, particularly in energy-saving strategies and new technologies. Candidates should anticipate a portion of the time will require travel to customer locations throughout North America. Qualifications: 2+ years of experience in HVAC control systems and/or building automation, including servicing and commissioning electronic controls. Strong knowledge of BMS protocols such as BACnet, Modbus, Lonworks, Tridium/Niagara and experience working with Delta Controls, JCI, and Andover based BMS systems Hands-on experience with system design, integration, and troubleshooting, including both legacy and new systems. Familiarity with mechanical and electrical systems as part of construction and building automation system. Ability to work on-site, including in confined spaces, on ladders, and with equipment weighing up to 50 lbs. Competency in Microsoft Word, Excel, and AutoCAD for creating and managing project documentation. Preferred Experience working with systems from Delta Controls, JCI, Andover, and Tridium. Strong organizational, communication, and problem-solving skills. Ability to manage customer relations and work effectively in a team to meet project deadlines. Performing other duties as assigned by Project Manager Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related fields is a plus. Benefits: Competitive salary is based on experience 401(k) plan with company match Comprehensive health insurance (Medical, Dental, Vision, Life) Paid Time Off and company holidays BROAD is an equal opportunity employer

Join our dynamic team to navigate complex risk landscapes and fortify technology governance, making a pivotal impact in our firm's robust risk strategy. As a Tech Risk and Controls - Tech Issue Management Oversight & Execution within the Technology Risk & Services team, you will contribute to the successful management of technology-aligned aspects of Governance, Risk, and Compliance in line with the firm's standards. Leverage your broad knowledge in risk management principles and practices to assess and monitor risks and implement effective controls. Your role in risk identification, control evaluation, and security governance is crucial in advising on complex situations and enhancing the firm's risk posture. Through collaboration and analytical skills, you will contribute to the overall success of the Technology Risk & Services team and ensure compliance with regulatory obligations and industry standards. Job responsibilities Assess and monitor technology risks, ensuring compliance with firm standards, regulatory requirements, and industry best practices Support implementation of effective controls in collaboration with cross-functional teams and stakeholders Evaluate the effectiveness of existing controls, identify gaps, and recommend improvements to mitigate risks and enhance the firm's risk posture Analyze complex situations, provide advice on risk management strategies, and support the implementation of risk mitigation measures Required qualifications, capabilities, and skills 3+ years of experience or equivalent expertise in technology risk management, information security, or a related field, with a focus on risk identification, assessment, and mitigation Experience in risk identification, assessment, and control evaluation, with a strong understanding of industry standards Demonstrated ability to analyze complex issues, develop and implement risk mitigation strategies, and communicate effectively with senior stakeholders Proficient knowledge of risk management frameworks, regulations, and industry best practices Preferred qualifications, capabilities, and skills CISM, CRISC, CISSP, or other industry-recognized risk certifications

WHAT YOU DO AT AMD CHANGES EVERYTHING At AMD, our mission is to build great products that accelerate next-generation computing experiences-from AI and data centers, to PCs, gaming and embedded systems. Grounded in a culture of innovation and collaboration, we believe real progress comes from bold ideas, human ingenuity and a shared passion to create something extraordinary. When you join AMD, you'll discover the real differentiator is our culture. We push the limits of innovation to solve the world's most important challenges-striving for execution excellence, while being direct, humble, collaborative, and inclusive of diverse perspectives. Join us as we shape the future of AI and beyond. Together, we advance your career. THE ROLE: AMD's Data Center Platform Engineering Group {DPEG} is designing, building and delivering innovative technology infrastructure enabling the digital world. We create cloud-enabling server solutions that help the world's leading companies turn their ideas into reality. Our customers are future-focused and so are we, always a step ahead of the next challenge. As experts in engineering, manufacturing, and supply chain, we're the bridge between problem and solution for the world's leading cloud and telecom providers. Our customers depend on us to solve their most complex server design needs. Come and join our Data Center Platform Engineering Group where we are building amazing, powered products with amazing people. This is an exciting role in which you will have great exposure to the latest technologies in the industry. In this role, you will be working as a member of the system development team. The position will handle multiple projects simultaneously, maintain project schedules/deadlines. Assist engineering projects by assembling, testing, refining prototypes, and evaluating new electronic components. You will be working closely with multiple engineering organizations. THE PERSON: If you are passionate about finding and resolving issues and thrive in fast-paced, technically challenging environments where you work on various problems, and exposure to the latest technology this could be the perfect opportunity. This position requires a theoretical knowledge of engineering, specifically electronic and electrical engineering, as well being heavily involved with hands-on. The position will utilize tools and technologies including electronic and computer hardware, architecture, and components; soldering tools for circuit boards and electronics; Linux and widows-based diagnostic/test programs to benchmark electronic component performance. KEY RESPONSIBILITIES: * Build, debug, test, repair, and upgrade computer prototypes (computers, servers, peripherals, programs, and software/firmware). * Proficient in hand soldering. * Assist engineers in the evaluation, design, and test of new electronic components. * Document prototype construction and maintain pertinent engineering records. * Write procedures and various technical documents. * Perform Lab Management responsibilities to maintain and organize a clean and efficient lab. * Materials management to inventory/track/ship materials. * Utilize analytical thinking and problem-solving skills to perform the above. PREFERRED QUALIFICATIONS: * Experienced in engineering test, debugging, tech support, or relevant experience. Experience within a computer hardware environment preferred. * Fundamental understanding of computer architecture and components (CPU, power supply, memory, graphics cards, flash memory, etc.) * Strong demonstrated soldering skills. Knowledge of circuit boards, soldering, and electronics * Ability to diagnose the root cause of computer system failure and isolate the components/failure nodes * Ability to use custom Linux and Windows-based diagnostic/test programs to run benchmarks/tests on electronic components' performance * Understanding of hardware and software interactions; able to apply this understanding to resolve issues * Excellent verbal and written communication skills * Strong interpersonal skills and the ability to interact with people at various levels in the organization * Analytical thinking and problem-solving ability; use rigorous logic to solve problems * Understands and uses speed as a competitive advantage; completes tasks on time * Lab Management and Organizing skill for maintaining clean and efficient labs. ACADEMIC CREDENTIALS: Associate's degree (or above) in Electronics, Certificate of Completion of Technical School, or equivalent combination of education and/or experience preferred This role is not eligible for Visa sponsorship. #LI-CB1 Benefits offered are described: AMD benefits at a glance. AMD does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. AMD and its subsidiaries are equal opportunity, inclusive employers and will consider all applicants without regard to age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates and will accommodate applicants' needs under the respective laws throughout all stages of the recruitment and selection process.

Welcome to Haleon. We're a purpose-driven, world-class consumer company putting everyday health in the hands of millions. In just three years since our launch, we've grown, evolved and are now entering an exciting new chapter - one filled with bold ambitions and enormous opportunity. Our trusted portfolio of brands - including Sensodyne , Panadol , Advil , Voltaren , Theraflu , Otrivin , and Centrum - lead in resilient and growing categories. What sets us apart is our unique blend of deep human understanding and trusted science. Now it's time to fully realise the full potential of our business and our people. We do this through our Win as One strategy. It puts our purpose - to deliver better everyday health with humanity - at the heart of everything we do. It unites us, inspires us, and challenges us to be better every day, driven by our agile, performance-focused culture. Hello. We're Haleon. A new world-leading consumer health company. Shaped by all who join us. Together, we're improving everyday health for billions of people. By growing and innovating our global portfolio of category-leading brands - including Sensodyne, Panadol, Advil, Voltaren, Theraflu, Otrivin, and Centrum - through a unique combination of deep human understanding and trusted science. What's more, we're achieving it in a company that we're in control of. In an environment that we're co-creating. And a culture that's uniquely ours. Care to join us. It isn't a question. With category leading brands such as Sensodyne, Voltaren and Centrum, built on trusted science and human understanding, and combined with our passion, knowledge and expertise, we're uniquely placed to do this and to grow a strong, successful business. This is an exciting time to join us and help shape the future. It's an opportunity to be part of something special. About the role The Automation Technician is responsible for maintains a high technical aptitude of automated systems hardware and software, provides on-shift automation support working in conjunction with operations and other maintenance employees, assist in troubleshooting systems, coordinating project work, and maintaining equipment functionality. Additionally, this role plays a key part in our reliability of equipment to ensure production operate safety, in compliance with quality requirements and, has limited downtime. This position works 12-hour shifts from 7:00pm - 7:00am. Role Responsibilities Monitor and maintain updated all machinery automation systems. Execute automation and electrical preventative maintenance, inspection, and corrective actions on machinery operations. Troubleshooting on automated system problems and make necessary repairs. Update and troubleshooting on recipes system. Perform equipment breakdown analysis related with electrical and automation issues, implementing solutions to increase reliability of equipment. Recommend improvements and modifications to production machines. Documenting completed work and the conditions found and analysis, utilizing Computerized Maintenance Management System (CMMS). Interacting regularly with peers and management to pursue continuous improvement of machinery operations. Work within an operations driven team environment to resolve issues and improve performance. Execute maintenance troubleshooting and equipment improvements by reading and comprehending automation program, electrical schematics, blueprints, and/or operation manuals. Capable of knowledge sharing in terms of equipment maintenance good practices through work instruction review, one point lesson development and perform automation training for maintenance and operations team. Follow safety procedures, recommended practices, LOTO, job safety analysis (JSA), safe work permits and complies with plant safety programs at all time. Execute the maintenance routines following the Good Manufacturing Practices (GMP) and quality compliance. Why you? Basic Qualifications: High School graduate or equivalent. Certification from a trade school in Electrical, Computer Operations, or Automation, or a degree in a maintenance-related field. Alternatively, relevant military experience or at least two years of hands-on experience in electrical maintenance, particularly with PLCs, VFDs, and other automated systems. Preferred Qualifications Preferred Experience of 2 to 5 years of recent and consistent experience in maintaining advanced electrical systems and/or automation systems. Experience working with Rockwell, Siemens, Schneider PLCs, VFDs, and other industrial automation equipment is highly beneficial. Familiarity with computer architecture and its integration into electrical systems is highly desirable. Have a working knowledge of troubleshooting of PLCs, HMIs, robots, AC motor drives, servodrives, vision system, sensors, industrial printer systems and electronic components. Knowledge of PLC ladder logic, Scada system and historian software. Ability to perform Automation Network troubleshooting with TC/IP and Profibus. Knowledge in using hand tools, electrical meter, and testing equipment Ability to interpret electrical prints and schematics and produce as-built drawing for work performed. Ability to perform electrical routine service, setup, adjustment and repairs of manufacturing mixers, high-speed packaging lines and palletizer system. Strong working knowledge of job site safety with the ability to thoroughly evaluate job hazards and complete job safety analysis with an emphasis on identifying electrical hazards and proper safety procedures, handling low to high voltage up to 480 VAC. Technical understanding of Good Manufacturing Practices (GMP) to be able to review and maintain facility related GMP documentation. Proficient in Microsoft Office applications (Word, Excel, PowerPoint). Haleon offers a robust Total Reward package that consists of competitive pay and a comprehensive benefits program. This includes a generous 401(k) plan, tuition reimbursement and time off programs including 6 months paid parental leave. On day one, you are eligible for benefits, including our healthcare programs where the company pays for the majority of your medical coverage for you and your family. We also offer the opportunity to receive a discretionary bonus based on the achievement of key business performance and other incentive/recognition programs as part of the offering. The salary range for this position is: $41,638 to $62,458 annually plus a 5% Performance Bonus. Benefits Haleon offers a robust Total Reward package that consists of competitive pay and a comprehensive benefits program. This includes a generous 401(k) plan, tuition reimbursement and time off programs including 6 months paid parental leave. On day one, you are eligible for benefits, including our healthcare programs where the company pays for the majority of your medical coverage for you and your family. We also offer the opportunity to receive a discretionary bonus based on the achievement of key business performance and other incentive/recognition programs as part of the offering. Job Posting End Date2025-12-17 Equal Opportunities Haleon are committed to mobilising our purpose in a way that represents the diverse consumers and communities who rely on our brands every day. It guides us in creating an inclusive culture, where different backgrounds and views are valued and respected - all in support of understanding and best serving the needs of our consumers and unleashing the full potential of our people. It's important to us that Haleon is a place where all our employees feel they truly belong. During the application process, we may ask you to share some personal information, which is entirely voluntary. This information ensures we meet certain regulatory and reporting obligations and supports the development, refinement, and execution of our inclusion and belonging programmes that are open to all Haleon employees. The personal information you provide will be kept confidential, used only for legitimate business purposes, and will never be used in making any employment decisions, including hiring decisions. Please note that if you are a US Licensed Healthcare Professional or Healthcare Professional as defined by the laws of the state issuing your license, Haleon may be required to capture and report expenses Haleon incurs, on your behalf, in the event you are afforded an interview for employment. This capture of applicable transfers of value is necessary to ensure Haleon's compliance to all federal and state US Transparency requirements. Accommodation Requests If you require a reasonable accommodation or other assistance to apply for a job at Haleon at any stage of the application process, please contact us by sending an email to ***************************. Please include the following in your email: Use subject line: ‘Haleon Careers: Job Accommodation Request' Your Name and contact information Requisition ID and Job Title you are interested in Location of Requisition (city/state or province/country) Description of specific accommodation you are requesting Please note: Resumes, CVs, or other requests outside of accommodation support submitted to this email box will not be accepted. Note to candidates The Haleon recruitment team will contact you using a Haleon email account (@haleon.com). If you are not sure whether the email you received is from Haleon, please get in touch.

Welcome to Haleon. We're a purpose-driven, world-class consumer company putting everyday health in the hands of millions. In just three years since our launch, we've grown, evolved and are now entering an exciting new chapter - one filled with bold ambitions and enormous opportunity. Our trusted portfolio of brands - including Sensodyne, Panadol, Advil, Voltaren, Theraflu, Otrivin, and Centrum - lead in resilient and growing categories. What sets us apart is our unique blend of deep human understanding and trusted science. Now it's time to fully realise the full potential of our business and our people. We do this through our Win as One strategy. It puts our purpose - to deliver better everyday health with humanity - at the heart of everything we do. It unites us, inspires us, and challenges us to be better every day, driven by our agile, performance-focused culture. Hello. We're Haleon. A new world-leading consumer health company. Shaped by all who join us. Together, we're improving everyday health for billions of people. By growing and innovating our global portfolio of category-leading brands - including Sensodyne, Panadol, Advil, Voltaren, Theraflu, Otrivin, and Centrum - through a unique combination of deep human understanding and trusted science. What's more, we're achieving it in a company that we're in control of. In an environment that we're co-creating. And a culture that's uniquely ours. Care to join us. It isn't a question. With category leading brands such as Sensodyne, Voltaren and Centrum, built on trusted science and human understanding, and combined with our passion, knowledge and expertise, we're uniquely placed to do this and to grow a strong, successful business. This is an exciting time to join us and help shape the future. It's an opportunity to be part of something special. About the role The Automation Technician is responsible for maintains a high technical aptitude of automated systems hardware and software, provides on-shift automation support working in conjunction with operations and other maintenance employees, assist in troubleshooting systems, coordinating project work, and maintaining equipment functionality. Additionally, this role plays a key part in our reliability of equipment to ensure production operate safety, in compliance with quality requirements and, has limited downtime. This position works 12-hour shifts from 7:00pm - 7:00am. Role Responsibilities * Monitor and maintain updated all machinery automation systems. * Execute automation and electrical preventative maintenance, inspection, and corrective actions on machinery operations. * Troubleshooting on automated system problems and make necessary repairs. * Update and troubleshooting on recipes system. * Perform equipment breakdown analysis related with electrical and automation issues, implementing solutions to increase reliability of equipment. * Recommend improvements and modifications to production machines. * Documenting completed work and the conditions found and analysis, utilizing Computerized Maintenance Management System (CMMS). * Interacting regularly with peers and management to pursue continuous improvement of machinery operations. * Work within an operations driven team environment to resolve issues and improve performance. * Execute maintenance troubleshooting and equipment improvements by reading and comprehending automation program, electrical schematics, blueprints, and/or operation manuals. * Capable of knowledge sharing in terms of equipment maintenance good practices through work instruction review, one point lesson development and perform automation training for maintenance and operations team. * Follow safety procedures, recommended practices, LOTO, job safety analysis (JSA), safe work permits and complies with plant safety programs at all time. * Execute the maintenance routines following the Good Manufacturing Practices (GMP) and quality compliance. Why you? Basic Qualifications: * High School graduate or equivalent. * Certification from a trade school in Electrical, Computer Operations, or Automation, or a degree in a maintenance-related field. Alternatively, relevant military experience or at least two years of hands-on experience in electrical maintenance, particularly with PLCs, VFDs, and other automated systems. Preferred Qualifications * Preferred Experience of 2 to 5 years of recent and consistent experience in maintaining advanced electrical systems and/or automation systems. * Experience working with Rockwell, Siemens, Schneider PLCs, VFDs, and other industrial automation equipment is highly beneficial. * Familiarity with computer architecture and its integration into electrical systems is highly desirable. * Have a working knowledge of troubleshooting of PLCs, HMIs, robots, AC motor drives, servodrives, vision system, sensors, industrial printer systems and electronic components. * Knowledge of PLC ladder logic, Scada system and historian software. * Ability to perform Automation Network troubleshooting with TC/IP and Profibus. * Knowledge in using hand tools, electrical meter, and testing equipment * Ability to interpret electrical prints and schematics and produce as-built drawing for work performed. * Ability to perform electrical routine service, setup, adjustment and repairs of manufacturing mixers, high-speed packaging lines and palletizer system. * Strong working knowledge of job site safety with the ability to thoroughly evaluate job hazards and complete job safety analysis with an emphasis on identifying electrical hazards and proper safety procedures, handling low to high voltage up to 480 VAC. * Technical understanding of Good Manufacturing Practices (GMP) to be able to review and maintain facility related GMP documentation. * Proficient in Microsoft Office applications (Word, Excel, PowerPoint). Haleon offers a robust Total Reward package that consists of competitive pay and a comprehensive benefits program. This includes a generous 401(k) plan, tuition reimbursement and time off programs including 6 months paid parental leave. On day one, you are eligible for benefits, including our healthcare programs where the company pays for the majority of your medical coverage for you and your family. We also offer the opportunity to receive a discretionary bonus based on the achievement of key business performance and other incentive/recognition programs as part of the offering. The salary range for this position is: $41,638 to $62,458 annually plus a 5% Performance Bonus. Benefits Haleon offers a robust Total Reward package that consists of competitive pay and a comprehensive benefits program. This includes a generous 401(k) plan, tuition reimbursement and time off programs including 6 months paid parental leave. On day one, you are eligible for benefits, including our healthcare programs where the company pays for the majority of your medical coverage for you and your family. We also offer the opportunity to receive a discretionary bonus based on the achievement of key business performance and other incentive/recognition programs as part of the offering. Job Posting End Date 2025-12-17 Equal Opportunities Haleon are committed to mobilising our purpose in a way that represents the diverse consumers and communities who rely on our brands every day. It guides us in creating an inclusive culture, where different backgrounds and views are valued and respected - all in support of understanding and best serving the needs of our consumers and unleashing the full potential of our people. It's important to us that Haleon is a place where all our employees feel they truly belong. During the application process, we may ask you to share some personal information, which is entirely voluntary. This information ensures we meet certain regulatory and reporting obligations and supports the development, refinement, and execution of our inclusion and belonging programmes that are open to all Haleon employees. The personal information you provide will be kept confidential, used only for legitimate business purposes, and will never be used in making any employment decisions, including hiring decisions. Please note that if you are a US Licensed Healthcare Professional or Healthcare Professional as defined by the laws of the state issuing your license, Haleon may be required to capture and report expenses Haleon incurs, on your behalf, in the event you are afforded an interview for employment. This capture of applicable transfers of value is necessary to ensure Haleon's compliance to all federal and state US Transparency requirements. Accommodation Requests If you require a reasonable accommodation or other assistance to apply for a job at Haleon at any stage of the application process, please contact us by sending an email to ***************************. Please include the following in your email: Use subject line: 'Haleon Careers: Job Accommodation Request' Your Name and contact information Requisition ID and Job Title you are interested in Location of Requisition (city/state or province/country) Description of specific accommodation you are requesting Please note: Resumes, CVs, or other requests outside of accommodation support submitted to this email box will not be accepted. Note to candidates The Haleon recruitment team will contact you using a Haleon email account (@haleon.com). If you are not sure whether the email you received is from Haleon, please get in touch.

Our story goes back more than 150 years, to the chilly southern coast of Scandinavia. From our early success in Sweden and Denmark, we've grown into the world's leading specialist producer of plant-based oils, employing more than 4,000 people all across the globe. We work with our customers to make the products you love even better. The oils we produce go into making your chocolate extra-creamy or putting the crunch into your croissant. And it's not just food - we work across industries to make products that are higher quality, healthier and better for the planet. Everything we do is about Making Better Happen. AAK Newark Newark, NJ About the role The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to assure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers' requirements and concerns is required in this position. Responsibilities Safety & Environmental Performance * Lead the safety effort by personal example. * Support full plant wide compliance with safety rules to further our goal of 0 accidents and encouragement of reporting and correcting near misses. * Support 0 contractor accidents during major construction or anytime maintenance contractors are on site. * Identify high-risk safety/ productivity issues and help remedy them. * Adhere to SOPs and other work procedures as required to assure product quality and consistency to our customers. * Ensure that all equipment is safely released to the technician following site Safe Work Permits and other Life Critical permits. * Perform job tasks in a manner compliant with GMPs. * Participate in company activities such as; Safety Committee, Audit committees, employee task forces, etc. Work Requirements * Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems. * Install, loop check, maintain and troubleshoot process control systems comprised of transmitters, controllers, and valves operating in a PLC system. * Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters * Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC. * Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements * Properly select, install and wire 120V-480V motors, single phase to three phase based on needs * Strong working knowledge of National Electrical Code (NFPA 70) * Evaluate current instrumentation technology for process equipment,and make recommendations for improvements. * Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure. * Provide on-call support during assigned weeks to ensure 24/7 coverage * Provide practical solutions to operations/ controls problems. * Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc. * Train other employees in light of their needs and company needs. * Oversee the work by contractors as required on site to assure safe and quality performance. * Look for opportunities to help work get done safer, faster and more cost effective. Cost Control * Contribute to the effort in controlling costs and minimizing wastage in pursuit of your daily work. * Support goal of minimum part sparing consistent with production goals and local vendor sport services. * Support goal of minimum part sparing consistent with production goals and local vendor sport services. About you High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment. * Ability to analyze and interpret technical problems related to instrumentation or PLC logic. * Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc) * Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force. * Ability to work with and apply mathematical concepts to practical situations. * Preferred: New Jersey Licensed Electrician (or working towards license) * Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician) In return AAK offer ●Career paths, training and development, e-learning and tuition reimbursement programs offering potential for you to progress your future career ●Comprehensive health insurance (medical, dental and vision) starting date of hire ●Health Savings Account with AAK annual contribution of $1,000-$1,500 ●401(k) Plan with 100% match ●Free Life and Disability insurance ●Employee Assistance Program ●Supplemental Pet Insurance, Identity Theft Protection and Legal Insurance Plans ●Discounts on travel, amusement parks, concerts, movies, and more ●Celebrations, events, and activities on site and supporting our communities About AAK Everything AAK does is about Making Better Happen. We specialize in plant-based oils that are the value-adding ingredients in many of the products people love to consume. We make these products better tasting, healthier, and more sustainable. At the heart of AAK's offer is Customer Co-Development, combining our desire to understand what better means for each customer, with the unique flexibility of our production assets, and a deep knowledge of many products and industries, including Chocolate & Confectionery, Bakery, Dairy, Plant-based Foods, Special Nutrition, Foodservice and Personal Care. Our 4,000 employees support our close collaboration with customers through 25 regional sales offices, 15 dedicated Customer Innovation Centers, and with the support of more than 20 production facilities. Listed on Nasdaq Stockholm and with our headquarters in Malmö, Sweden, AAK has been Making Better Happen for more than 150 years. AAK prohibits discrimination on the basis of race, color, sex, sexual orientation, age, national origin, physical or mental disability, religion, veteran status, and any other class of individuals protected from discrimination under state or federal law in any aspect of the access to, admission, or treatment of students in its programs and activities, or in employment and application for employment.

Driven by a commitment to research, quality, and service, PDI provides innovative products, educational resources, training, and support to prevent infection transmission and promote health and wellness. Encompassing three areas, our Healthcare, Sani Professional and Contract manufacturing divisions, we develop, manufacture, and distribute leading edge products for North America and the world. We have several locations across the US and are looking for new Associates to join our team! POSITION PURPOSE * This position is for 1st Shift (Mon-Fri 7:00am-3:30pm)* We are seeking a Senior Electromechanical Technician to support our manufacturing operations by reducing equipment downtime and ensuring reliable performance of automated and electrical control systems. This role focuses on electrical troubleshooting and automation support across PLCs, servo drives, robotics, sensors, and control systems. Some mechanical skills are also required but secondary. The ideal candidate has deep expertise in industrial electrical systems and automation, with the ability to quickly diagnose and resolve complex control issues while collaborating with production, maintenance, and engineering teams. ESSENTIAL FUNCTIONS AND BASIC DUTIES * Troubleshooting & Repair * Rapidly diagnose and repair downtime issues across PLCs, servo drives, robotics, sensors, motor controls, and control valves. * Calibrate, test, and replace sensors, encoders, and electrical feedback devices. * Resolve integration and safety interlock issues within robotic cells, conveyors, and automated lines. * Support limited mechanical troubleshooting only as needed to enable electrical/automation functionality. * Preventive & Predictive Maintenance * Execute preventive maintenance (PMs) focused on electrical and control systems for production equipment. * Support predictive maintenance initiatives (e.g., electrical testing, thermal imaging, insulation resistance checks). * Document electrical and automation repairs in the CMMS. * Collaboration & Continuous Improvement * Partner with engineers and operations on root cause analysis (RCA) for recurring electrical or control failures. * Recommend and implement upgrades to controls, automation systems, and electrical hardware/software. * Provide technical mentorship to junior technicians in electrical troubleshooting and automation practices. * Compliance & Safety * Follow and enforce OSHA/EHS standards during all maintenance activities. * Ensure all lockout/tagout (LOTO) and electrical safety procedures are followed. PERFORMANCE MEASUREMENTS * Equipment Reliability & Uptime * Preventive & Predictive Maintenance Execution * Troubleshooting & Technical Skills * Safety & Compliance * Contribution to Automation/Controls Improvements QUALIFICATIONS EDUCATION/CERTIFICATION: * Associate Degree in Electrical Technology or Equivalent Industry Experience REQUIRED KNOWLEDGE: * Hands-on expertise in PLC troubleshooting (Allen-Bradley, Siemens, or similar - programming experience a plus but not required). * Strong knowledge of servo drives, VFDs, robotics, and industrial controls. * Working knowledge of pneumatics, actuators, and mechanical power transmission systems. * Ability to read and interpret electrical schematics, mechanical drawings, and equipment manuals. EXPERIENCE REQUIRED: * At least 8 years in industrial maintenance preferred, with strong exposure to automation and electromechanical systems. * Individuals with fewer years of experience may be considered if they demonstrate significant expertise in automation and electromechanical systems. * Some mechanical aptitude required SKILLS/ABILITIES: * Strong troubleshooting and problem-solving mindset. * Excellent communication and teamwork skills. * Flexibility to support multiple shifts and respond to urgent downtime events. * Testing equipment (e.g., oscilloscopes, multimeters) * Familiarity with industrial protocols (e.g., Ethernet/IP, Modbus, Profibus). * Experience with robotics, motion control, automation, or machine vision systems. WORKING CONDITIONS * No hazardous work conditions. * Position in a manufacturing plant environment. * Production floor work is required for installation, testing, or troubleshooting equipment and control systems. SALARY RANGE * $70,000 - $90,000 annually, plus bonus and OT pay (as necessary) PDI is pleased to offer a comprehensive and affordable benefits program to our associates, which includes: * Medical & prescription drug coverage * Dental / Vision plan * 401(k) savings plan with company match * Basic and supplemental life insurance * Flexible Spending Accounts (FSAs) * Short- and long-term disability benefits * Health Advocacy Program / Employee Assistance Program (EAP) Many other voluntary benefit plans such as: Legal assistance, critical illness, hospital indemnity and accident coverage, discounted home/auto/rental insurance, employee discounts and pet insurance At PDI, we are also committed to helping our associates maintain a healthy and sustainable work/life balance and are proud to provide: Sick leave, generous vacation and holiday time, paid parental leave, summer hours, flex place/flex time options

Job DescriptionPower-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Technician. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand). Experience with ACAD, or similar CAD software. Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc. Niagara N4 certification. Ability to read and interpret blueprints, specifications, and program /design to meet sequence of operations of both design/build projects as well as plan/spec projects. Additional Necessary Qualifications 3 years of building automation experience required. Strong understanding of commercial HVAC systems operations. Ability to read mechanical prints and schematics. Ability to work independently and in a team setting. Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook). Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools. Mechanical aptitude required. The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams. Valid and clean NYS Driver's License to operate company vehicles. OSHA 30 and site safety training. Physical Requirements Ability to Stand for 8 Hours Ability to lift 50 pounds Ability to work on elevated platforms Ability to climb ladders This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 - $100,000/year Benefits Health Insurance (medical, dental, vision) PTO Program and Paid Holidays 401K EAP We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Veolia is seeking a Water Treatment Process and Industrial Instrumentation Technician (union position, on-call) to support the operation, maintenance, and optimization of water treatment plant and distribution system equipment. This role focuses on the installation, calibration, repair, and troubleshooting of industrial instrumentation and control systems from manufacturers such as Siemens, Hach, and Endress+Hauser, Allen Bradley as well as the operation and monitoring of water quality instrumentation, analyzers, and SCADA/PLC systems. The technician will work collaboratively with operations and maintenance teams to ensure compliance with water quality standards and maximize system efficiency. Primary Duties/Responsibilities: Install, calibrate, maintain, and repair industrial instrumentation and control equipment (flow meters, analyzers, transmitters, sensors, etc.) Troubleshoot and diagnose issues with instrumentation, PLCs, and SCADA systems, providing timely solutions to minimize downtime. Experienced with water treatment plant and distribution system equipment, including pumps, valves, and chemical feed systems. Collect and analyze water and sludge samples; perform chemical and analytical testing. Conduct preventive maintenance and routine inspections of equipment. Maintain accurate records of work performed, calibration data, and equipment inventory using CMMS and other methods. Interpret technical manuals, wiring diagrams, and schematics for installation and troubleshooting. Work with manufactures representatives to assist in troubleshooting and repair. Collaborate with engineering operations and maintenance teams for process optimization and system upgrades. Respond to alarms, emergencies, and participate in an on-call for after-hours support. Adhere to and promote Veolia's safety policies and practices. With proper electrical background, installs, maintains, services, tests, calibrates and repairs all instrumentation and measuring equipment, including telemetering and supervisory controls at all stations and other locations as assigned. Reads and works from schematics, wiring diagrams, electrical blueprints and drawings. Must keep abreast of rapidly changing technology by acquiring and maintaining the skills and knowledge needed through a company assisted training program. Keeps records of equipment maintained and repaired. Uses, adjusts, and repairs electronic testing equipment. Performs other similar or less skilled work as assigned. Assists employees of a higher classification as assigned. Qualifications Education/Experience/Background: High School Diploma/GED is required. Electrical experience required. Demonstrated experience with Siemens, Hach, Endress+Hauser, or similar industrial instrumentation. Experience in water treatment plant operations, distribution systems, or industrial instrumentation and automation. Knowledge/Skills/Abilities: Strong knowledge of PLC programming and SCADA system interfaces. Ability to read and interpret technical documents, schematics, and wiring diagrams. Computer literacy with Google Suite and Microsoft Office applications. Excellent troubleshooting, problem-solving, and record-keeping skills. Ability to interface with technical solutions resources from manufacturers and representatives. Ability to work independently and as part of a team. Required Certification/Licenses/Training: Trade school certification in industrial instrumentation, electronics, or a related field preferred. Valid driver's license is required. Physical Requirements: Ability to lift up to 40 lbs. Normal visual acuity, manual dexterity, and hearing ability. Ability to climb ladders, work in confined spaces, and detect odors. Additional Information Pay Rate: $41.36 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

About Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: Build, operate, maintain, and troubleshoot complex mechanical and electrical systems Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality Responsible for tool and workspace organization and maintenance Assemble and troubleshoot test articles and supporting test equipment Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets: High-school diploma or equivalent 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems Comfortable working to aggressive deadlines and exceptional work ethic Proficiency with Microsoft Office suite tools or similar software Ideal Experience: Knowledge of quality control and inspection procedures Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers Experience with reflow solder processes, including PCBA manufacturing Crane or lifting experience Forklift experience Experience with electrical schematic and wiring Experience using various types of hand tools and precision measuring tools Experience in documenting, improving, and implementing process instructions Experience with reading and reviewing mechanical drawings Experience with machining, operating manual milling, saws, and other tools Company Benefits: Hourly rate $30-43/hr Comprehensive health benefits (e.g. medical/dental/vision) Employee equity stock options 20 days PTO It's not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world's hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran's status, or other characteristic protected by applicable laws and regulations.

Salary: $ 70,000.00 We have partnered with a manufacturing company in Mahwah, NJ to provide them with a Engineering Technician. Please review the below description and let us know if you are interested. Prioritized Must Have Skills for the Engineering Technician: #1. Technical School Degree or Associates required, Bachelors degree in Engineering a plus #2. Ability to use basic power tools #3. Ability to do basic prototyping #4. Prior experience with building and disassembling small products #5. CAD not required, but prior experience is a plus Responsibilities of the Engineering Technician: The Engineering Technician will aid the Product Development team by working with physical products in the testing lab. Daily tasks include disassembling products and running test procedures and assisting the engineering team with fabrication. The ideal candidate is organized with multiple projects, thorough in detail-oriented tasks, and possesses a friendly personality. Role & Responsibilities Work with Engineering team to help with fabrication and test setups. Disassembling competitors products for technical evaluation Work with Systems programmers to develop new product systems parameters and evaluation of system functionalities. Evaluating client products with test procedures after disassembly Requirements of the Engineering Technician: Determining and performing tests needed for the analysis and report Recording tests and analyses and then reporting the results Discussing and answering any questions regarding the results Organizing and storing samples Cleaning and maintaining lab equipment, including recalibration of equipment Staying current on technical and scientific advances in their field Technical School Degree or Associates required, Bachelors degree in Engineering a plus Ability to use basic power tools Ability to do basic prototyping Prior experience with building and disassembling small products CAD not required, but prior experience is a plus Microsoft Office proficient Other Key Requirements for the Engineering Technician: Onsite role. No sponsorships or visa holders. No Corp-to-Corp. Benefits of the Engineering Technician: Medical Insurance Dental Insurance Life Insurance Disability Insurance 401(k) plan About the Company: Cyfle is a global business dedicated to connecting talents worldwide. Our comprehensive RPO services, placement services, and training services help businesses unlock their full potential.

Join our dynamic team to navigate complex risk landscapes and fortify technology governance, making a pivotal impact in our firm's robust risk strategy. As a Tech Risk and Controls - Tech Issue Management Oversight & Execution within the Technology Risk & Services team, you will contribute to the successful management of technology-aligned aspects of Governance, Risk, and Compliance in line with the firm's standards. Leverage your broad knowledge in risk management principles and practices to assess and monitor risks and implement effective controls. Your role in risk identification, control evaluation, and security governance is crucial in advising on complex situations and enhancing the firm's risk posture. Through collaboration and analytical skills, you will contribute to the overall success of the Technology Risk & Services team and ensure compliance with regulatory obligations and industry standards. Job responsibilities Assess and monitor technology risks, ensuring compliance with firm standards, regulatory requirements, and industry best practices Support implementation of effective controls in collaboration with cross-functional teams and stakeholders Evaluate the effectiveness of existing controls, identify gaps, and recommend improvements to mitigate risks and enhance the firm's risk posture Analyze complex situations, provide advice on risk management strategies, and support the implementation of risk mitigation measures Required qualifications, capabilities, and skills 3+ years of experience or equivalent expertise in technology risk management, information security, or a related field, with a focus on risk identification, assessment, and mitigation Experience in risk identification, assessment, and control evaluation, with a strong understanding of industry standards Demonstrated ability to analyze complex issues, develop and implement risk mitigation strategies, and communicate effectively with senior stakeholders Proficient knowledge of risk management frameworks, regulations, and industry best practices Preferred qualifications, capabilities, and skills CISM, CRISC, CISSP, or other industry-recognized risk certifications

Driven by a commitment to research, quality, and service, PDI provides innovative products, educational resources, training, and support to prevent infection transmission and promote health and wellness. Encompassing three areas, our Healthcare, Sani Professional and Contract manufacturing divisions, we develop, manufacture, and distribute leading edge products for North America and the world. We have several locations across the US and are looking for new Associates to join our team! POSITION PURPOSE We are seeking a Senior Electromechanical Technician to support our manufacturing operations by reducing equipment downtime and ensuring reliable performance of automated and electrical control systems. This role focuses on electrical troubleshooting and automation support across PLCs, servo drives, robotics, sensors, and control systems. Some mechanical skills are also required but secondary. The ideal candidate has deep expertise in industrial electrical systems and automation, with the ability to quickly diagnose and resolve complex control issues while collaborating with production, maintenance, and engineering teams. ESSENTIAL FUNCTIONS AND BASIC DUTIES Troubleshooting & Repair Rapidly diagnose and repair downtime issues across PLCs, servo drives, robotics, sensors, motor controls, and control valves. Calibrate, test, and replace sensors, encoders, and electrical feedback devices. Resolve integration and safety interlock issues within robotic cells, conveyors, and automated lines. Support limited mechanical troubleshooting only as needed to enable electrical/automation functionality. Preventive & Predictive Maintenance Execute preventive maintenance (PMs) focused on electrical and control systems for production equipment. Support predictive maintenance initiatives (e.g., electrical testing, thermal imaging, insulation resistance checks). Document electrical and automation repairs in the CMMS. Collaboration & Continuous Improvement Partner with engineers and operations on root cause analysis (RCA) for recurring electrical or control failures. Recommend and implement upgrades to controls, automation systems, and electrical hardware/software. Provide technical mentorship to junior technicians in electrical troubleshooting and automation practices. Compliance & Safety Follow and enforce OSHA/EHS standards during all maintenance activities. Ensure all lockout/tagout (LOTO) and electrical safety procedures are followed. PERFORMANCE MEASUREMENTS Equipment Reliability & Uptime Preventive & Predictive Maintenance Execution Troubleshooting & Technical Skills Safety & Compliance Contribution to Automation/Controls Improvements QUALIFICATIONS EDUCATION/CERTIFICATION: Associate Degree in Electrical Technology or Equivalent Industry Experience REQUIRED KNOWLEDGE: Hands-on expertise in PLC troubleshooting (Allen-Bradley, Siemens, or similar - programming experience a plus but not required). Strong knowledge of servo drives, VFDs, robotics, and industrial controls. Working knowledge of pneumatics, actuators, and mechanical power transmission systems. Ability to read and interpret electrical schematics, mechanical drawings, and equipment manuals. EXPERIENCE REQUIRED: At least 8 years in industrial maintenance preferred, with strong exposure to automation and electromechanical systems. Individuals with fewer years of experience may be considered if they demonstrate significant expertise in automation and electromechanical systems. Some mechanical aptitude required SKILLS/ABILITIES: Strong troubleshooting and problem-solving mindset. Excellent communication and teamwork skills. Flexibility to support multiple shifts and respond to urgent downtime events. Testing equipment (e.g., oscilloscopes, multimeters) Familiarity with industrial protocols (e.g., Ethernet/IP, Modbus, Profibus). Experience with robotics, motion control, automation, or machine vision systems. WORKING CONDITIONS No hazardous work conditions. Position in a manufacturing plant environment. Production floor work is required for installation, testing, or troubleshooting equipment and control systems. SALARY RANGE $70,000 - $90,000 annually, plus bonus and OT pay (as necessary) PDI is pleased to offer a comprehensive and affordable benefits program to our associates, which includes: Medical & prescription drug coverage Dental / Vision plan 401(k) savings plan with company match Basic and supplemental life insurance Flexible Spending Accounts (FSAs) Short- and long-term disability benefits Health Advocacy Program / Employee Assistance Program (EAP) Many other voluntary benefit plans such as: Legal assistance, critical illness, hospital indemnity and accident coverage, discounted home/auto/rental insurance, employee discounts and pet insurance At PDI, we are also committed to helping our associates maintain a healthy and sustainable work/life balance and are proud to provide: Sick leave, generous vacation and holiday time, paid parental leave, summer hours, flex place/flex time options

Power-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Technician. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? * Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand). * Experience with ACAD, or similar CAD software. * Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc. * Niagara N4 certification. * Ability to read and interpret blueprints, specifications, and program /design to meet sequence of operations of both design/build projects as well as plan/spec projects. Additional Necessary Qualifications * 3 years of building automation experience required. * Strong understanding of commercial HVAC systems operations. * Ability to read mechanical prints and schematics. * Ability to work independently and in a team setting. * Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook). * Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools. * Mechanical aptitude required. * The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams. * Valid and clean NYS Driver's License to operate company vehicles. * OSHA 30 and site safety training. Physical Requirements * Ability to Stand for 8 Hours * Ability to lift 50 pounds * Ability to work on elevated platforms * Ability to climb ladders * This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 - $100,000/year Benefits * Health Insurance (medical, dental, vision) * PTO Program and Paid Holidays * 401K * EAP We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Veolia is seeking a Water Treatment Process and Industrial Instrumentation Technician (union position, on-call) to support the operation, maintenance, and optimization of water treatment plant and distribution system equipment. This role focuses on the installation, calibration, repair, and troubleshooting of industrial instrumentation and control systems from manufacturers such as Siemens, Hach, and Endress+Hauser, Allen Bradley as well as the operation and monitoring of water quality instrumentation, analyzers, and SCADA/PLC systems. The technician will work collaboratively with operations and maintenance teams to ensure compliance with water quality standards and maximize system efficiency. Primary Duties/Responsibilities: Install, calibrate, maintain, and repair industrial instrumentation and control equipment (flow meters, analyzers, transmitters, sensors, etc.) Troubleshoot and diagnose issues with instrumentation, PLCs, and SCADA systems, providing timely solutions to minimize downtime. Experienced with water treatment plant and distribution system equipment, including pumps, valves, and chemical feed systems. Collect and analyze water and sludge samples; perform chemical and analytical testing. Conduct preventive maintenance and routine inspections of equipment. Maintain accurate records of work performed, calibration data, and equipment inventory using CMMS and other methods. Interpret technical manuals, wiring diagrams, and schematics for installation and troubleshooting. Work with manufactures representatives to assist in troubleshooting and repair. Collaborate with engineering operations and maintenance teams for process optimization and system upgrades. Respond to alarms, emergencies, and participate in an on-call for after-hours support. Adhere to and promote Veolia's safety policies and practices. With proper electrical background, installs, maintains, services, tests, calibrates and repairs all instrumentation and measuring equipment, including telemetering and supervisory controls at all stations and other locations as assigned. Reads and works from schematics, wiring diagrams, electrical blueprints and drawings. Must keep abreast of rapidly changing technology by acquiring and maintaining the skills and knowledge needed through a company assisted training program. Keeps records of equipment maintained and repaired. Uses, adjusts, and repairs electronic testing equipment. Performs other similar or less skilled work as assigned. Assists employees of a higher classification as assigned. Qualifications Education/Experience/Background: High School Diploma/GED is required. Electrical experience required. Demonstrated experience with Siemens, Hach, Endress+Hauser, or similar industrial instrumentation. Experience in water treatment plant operations, distribution systems, or industrial instrumentation and automation. Knowledge/Skills/Abilities: Strong knowledge of PLC programming and SCADA system interfaces. Ability to read and interpret technical documents, schematics, and wiring diagrams. Computer literacy with Google Suite and Microsoft Office applications. Excellent troubleshooting, problem-solving, and record-keeping skills. Ability to interface with technical solutions resources from manufacturers and representatives. Ability to work independently and as part of a team. Required Certification/Licenses/Training: Trade school certification in industrial instrumentation, electronics, or a related field preferred. Valid driver's license is required. Physical Requirements: Ability to lift up to 40 lbs. Normal visual acuity, manual dexterity, and hearing ability. Ability to climb ladders, work in confined spaces, and detect odors. Additional Information Pay Rate: $41.36 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Power-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Technician. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand). Experience with ACAD, or similar CAD software. Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc. Niagara N4 certification. Ability to read and interpret blueprints, specifications, and program /design to meet sequence of operations of both design/build projects as well as plan/spec projects. Additional Necessary Qualifications 3 years of building automation experience required. Strong understanding of commercial HVAC systems operations. Ability to read mechanical prints and schematics. Ability to work independently and in a team setting. Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook). Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools. Mechanical aptitude required. The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams. Valid and clean NYS Driver's License to operate company vehicles. OSHA 30 and site safety training. Physical Requirements Ability to Stand for 8 Hours Ability to lift 50 pounds Ability to work on elevated platforms Ability to climb ladders This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 - $100,000/year Benefits Health Insurance (medical, dental, vision) PTO Program and Paid Holidays 401K EAP We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.