Controls technician jobs in Roanoke, VA - 51 jobs

The Building Automations Services Technician monitors, operates, maintains, modifies, troubleshoots, and replaces pneumatic, electronic, and direct digital controls systems for campus HVAC building controls, lighting controls, and building control system network to ensure occupant comfort, space pressurization, improve system efficiency, and reduce facility operating costs. The reliable operation of these systems is critical to the University. Required Qualifications * Associate degree in Electronics, Building Automation, and or directly related field, or an equivalent combination of training and/or experience. * Experience utilizing and or operating a Building Automation System. * Experience comprehending and analyzing complex interrelationships between multiple HVAC components. * Experience working from drawings, schematics, blueprints and job layouts. * Experience working with a variety of hand tools. * Must have a valid drivers license. * Must possess strong computer skills with Excel and Word. * Must have strong interpersonal and verbal/written communications skills. * Must have the ability to interact with contractors and commissioning agents to verify systems are installed and operate properly. Preferred Qualifications * Virginia Master's HVAC license. * Experience with installation, programming, startup, commissioning, integration, modifying, troubleshooting and repair of one or more direct digital control system. * Experience configuring and integrating various manufacturer graphical user interfaces, network level controllers and field level controllers using BACnet, LonWorks, Modbus and proprietary protocols. * Verifiable experience in the repair and maintenance in a large institution or commercial facility with complex infrastructure systems with hands on experience troubleshooting and calibrating pneumatic and DDC building management controls systems. * Experience with Siemens Apogee Insight or Desigo CC system. Pay Band 4 Overtime Status Non-Exempt: Eligible for overtime Appointment Type Regular Salary Information $58,000-$68,000 Hours per week 40 Review Date December 17, 2025 Additional Information This position is not eligible for visa sponsorship. Applicants must be authorized to work in the United States without the need for current or future sponsorship. The successful candidate will be required to have a criminal conviction check. About Virginia Tech Dedicated to its motto, Ut Prosim (That I May Serve), Virginia Tech pushes the boundaries of knowledge by taking a hands-on, transdisciplinary approach to preparing scholars to be leaders and problem-solvers. A comprehensive land-grant institution that enhances the quality of life in Virginia and throughout the world, Virginia Tech is an inclusive community dedicated to knowledge, discovery, and creativity. The university offers more than 280 majors to a diverse enrollment of more than 36,000 undergraduate, graduate, and professional students in eight undergraduate colleges, a school of medicine, a veterinary medicine college, Graduate School, and Honors College. The university has a significant presence across Virginia, including Blacksburg, the greater Washington, D.C. area, the Health Sciences and Technology Campus in Roanoke, sites in Newport News and Richmond, and numerous Extension offices and research institutes. A leading global research institution, Virginia Tech conducts more than $650 million in research annually. Virginia Tech endorses and encourages participation in professional development opportunities and university shared governance. These valuable contributions to university shared governance provide important representation and perspective, along with opportunities for unique and impactful professional development. Virginia Tech does not discriminate against employees, students, or applicants on the basis of age, color, disability, sex (including pregnancy), gender, gender identity, gender expression, genetic information, ethnicity or national origin, political affiliation, race, religion, sexual orientation, or military status, or otherwise discriminate against employees or applicants who inquire about, discuss, or disclose their compensation or the compensation of other employees or applicants, or on any other basis protected by law. If you are an individual with a disability and desire an accommodation, please contact Facilities HR at ops *********** during regular business hours at least 10 business days prior to the event.

Schedule: WEEKEND DAYS, FRI-SUN 6AM-630PM Click here to experience a Day in the Life of our Teammates! Uncap Your Potential at America's Largest Coca-Cola Bottler - Pour Your Passion into Purpose! We're more than beverages-we're building meaningful careers and vibrant communities. Join our team where your talent meets purpose, and every teammate directly shapes our success. * Career Growth: Clear pathways to advance and develop your career * Competitive Benefits: 401(k) match + health coverage + employee stock purchase plan * Purpose-Driven: Create meaningful impact in the communities you serve * Professional Development: Dedicated training + personalized mentorship Join us - your refreshing new chapter starts here! Job Overview The Production Electrician is responsible for troubleshooting electrical issues, repairing, replacing, and maintaining the electrical wiring and circuits on assets in the production facility by responding promptly to equipment breakdowns and repairing the machinery's electrical components in a timely manner. The Production Electrician also serves as the on-site subject matter expert for electrical matters, performs planned and unscheduled work, and provides advice and training to new personnel, including Mechanic I level, and Mechanic II level employees. Duties & Responsibilities * Repair, replace, and maintain electrical wiring and circuits on assets in the production facility in a timely manner * Troubleshoots equipment for electrical issues to prevent malfunctions and, or identify opportunities for improvements * Programs electrical and electronic equipment and handles the installation, maintenance, and repairs for electrical controls, wiring, and lighting systems * Participates in the installation of new or modified assets and ensures optimal functionality of electrical components * Maintains electrical drawings (paper or electronic) * May perform other duties as assigned Knowledge, Skills, & Abilities * Adequate knowledge and experience with Microsoft Office (Word, Excel, Outlook) * Electrical experience in manufacturing equipment repair or parts is preferred * Attention to detail * Ability to collaborate and work well with others * Ability to work independently or in a team-driven setting * Basic decision-making skills; uses independent judgment * Dedication to continuous improvement Minimum Qualifications * 2 years of education beyond high school in college or technical school * Associate's degree or up to 3 years of college or technical school * Knowledge acquired through 1 to up to 3 years of work experience Preferred Qualifications * Associate degree in Electrical * Electrical Certification or previous 1-3 years experience Work Environment Noisy, wet, and extreme temperature environment #LI-MP1 Equal Opportunity Employer - All qualified applicants will be considered for employment without regard to disability, protected veteran status, or any other characteristic protected by applicable law. Nearest Major Market: Roanoke

Apply now Back to search results Job no: 534982 Work type: Staff Senior management: VP Facilities Department: Facilities Operations Job Description The Building Automations Services Technician monitors, operates, maintains, modifies, troubleshoots, and replaces pneumatic, electronic, and direct digital controls systems for campus HVAC building controls, lighting controls, and building control system network to ensure occupant comfort, space pressurization, improve system efficiency, and reduce facility operating costs. The reliable operation of these systems is critical to the University. Required Qualifications * Associate degree in Electronics, Building Automation, and or directly related field, or an equivalent combination of training and/or experience. * Experience utilizing and or operating a Building Automation System. * Experience comprehending and analyzing complex interrelationships between multiple HVAC components. * Experience working from drawings, schematics, blueprints and job layouts. * Experience working with a variety of hand tools. * Must have a valid drivers license. * Must possess strong computer skills with Excel and Word. * Must have strong interpersonal and verbal/written communications skills. * Must have the ability to interact with contractors and commissioning agents to verify systems are installed and operate properly. Preferred Qualifications * Virginia Master's HVAC license. * Experience with installation, programming, startup, commissioning, integration, modifying, troubleshooting and repair of one or more direct digital control system. * Experience configuring and integrating various manufacturer graphical user interfaces, network level controllers and field level controllers using BACnet, LonWorks, Modbus and proprietary protocols. * Verifiable experience in the repair and maintenance in a large institution or commercial facility with complex infrastructure systems with hands on experience troubleshooting and calibrating pneumatic and DDC building management controls systems. * Experience with Siemens Apogee Insight or Desigo CC system. Pay Band 4 Overtime Status Non-Exempt: Eligible for overtime Appointment Type Regular Salary Information $58,000-$68,000 Hours per week 40 Review Date December 17, 2025 Additional Information This position is not eligible for visa sponsorship. Applicants must be authorized to work in the United States without the need for current or future sponsorship. The successful candidate will be required to have a criminal conviction check. About Virginia Tech Dedicated to its motto, Ut Prosim (That I May Serve), Virginia Tech pushes the boundaries of knowledge by taking a hands-on, transdisciplinary approach to preparing scholars to be leaders and problem-solvers. A comprehensive land-grant institution that enhances the quality of life in Virginia and throughout the world, Virginia Tech is an inclusive community dedicated to knowledge, discovery, and creativity. The university offers more than 280 majors to a diverse enrollment of more than 36,000 undergraduate, graduate, and professional students in eight undergraduate colleges, a school of medicine, a veterinary medicine college, Graduate School, and Honors College. The university has a significant presence across Virginia, including Blacksburg, the greater Washington, D.C. area, the Health Sciences and Technology Campus in Roanoke, sites in Newport News and Richmond, and numerous Extension offices and research institutes. A leading global research institution, Virginia Tech conducts more than $650 million in research annually. Virginia Tech endorses and encourages participation in professional development opportunities and university shared governance. These valuable contributions to university shared governance provide important representation and perspective, along with opportunities for unique and impactful professional development. Virginia Tech does not discriminate against employees, students, or applicants on the basis of age, color, disability, sex (including pregnancy), gender, gender identity, gender expression, genetic information, ethnicity or national origin, political affiliation, race, religion, sexual orientation, or military status, or otherwise discriminate against employees or applicants who inquire about, discuss, or disclose their compensation or the compensation of other employees or applicants, or on any other basis protected by law. If you are an individual with a disability and desire an accommodation, please contact Facilities HR at ops *********** during regular business hours at least 10 business days prior to the event. Advertised: December 5, 2025 Applications close:

The Control Technician 4 is responsible for the fabrication of control panels, field installation and commissioning procedures associated with control panels and field instrumentation, troubleshooting & calibration of field instruments, equipment, and control panels, testing and analysis, documentation and updating drawings of finished control panels. Care of all M.C. Dean, Inc. provided shop tools, meters, and other associated equipment. Responsibilities + Following verbal instructions and reading instructions such as work orders, diagrams, and wire lists to determine materials needed and sequence of assembly. + Performing sheet metal works, punching holes, wiring, painting, and welding. + Providing on-the-job training to new employees. + Understanding and following Company procedures for ordering, storing, receiving, and returning materials and tools. + Ensuring work is completed as per schedule and quality goals are achieved. Qualifications **Years of Experience:** + At least 7 years of experience in a shop environment with a high school diploma or GED. **Certifications:** + Obtain, at the Company's expense, a CPR and First Aid certification within six (6) months of hire and maintain this certification status while employed by M.C. Dean, Inc. + Pass a background investigation and drug test. **Work Experience:** + Knowledge of and ability to interpret control circuits, schematics, and various line diagrams. + Ability to select various control components needed in the fabrication of Control Panels. + Ability to read and prepare a BOM (Bill of Materials) from specifications and/or according to NEC and UL508A standards. + Ability to size circuit breakers and fuses for control and power circuits according to specifications and/or NEC standards. + Ability to fabricate control panels including design, layout, and install components. + Ability to install, wire, and test wiring of PLC's, VFD's, and other Solid State control components. + Commission and document completed control panel or circuits as necessary. + Knowledge and use multi-function meters and various test equipment necessary to project. + Understanding of various Industrial automation and control schemes. + Able to troubleshoot, replace, install, and relocate industrial control circuits and components within various active industrial manufacturing processes and environments. **Use of Tools:** + Various power tools including drills, saws, punch sets utilizing corded, cordless, and hydraulic methods. + Corded and cordless drills + Corded and cordless saws + Hydraulic and Hand Punch Sets + Fluke 787 Process Meter + Fluke 87 Multimeter or equivalent Hi-Pot + Meggar + Relay Tester + Resistance Tester + Ground Tester + Oscilloscope **Use of laptop:** + PC's with various manufacturer's software packages to check wiring circuits/controls and test PLC's, VFD's, and other Solid State components. **Abilities:** + The position requires the ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. + Relocates a 12-foot stepladder without assistance. + Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks, and all types of ladders. + Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. + Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. + May use a standard ladder without exceeding the weight limit while carrying tools. + Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. + Apply general rules to specific problems to produce answers that make sense. + Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). + See details at close range (within a few feet of the observer). + Listen to and understand information and ideas presented through spoken words and sentences

Job Description About the role Keep our production assets dependable, safe, and efficient by combining electro-mechanical know‑how with strong troubleshooting and communication skills. Schedule & compensation Full-time, 12-hour shifts on a 2-2-3 schedule Average 14 days off per month with extended weekends every other week Compensation up to $35 per hour, based on experience Overtime as needed to meet customer demand What you'll do Perform inspections, tests, and preventive maintenance on plant machinery and equipment Document and discuss issues with supervisors/managers; plan corrective actions Disassemble malfunctioning equipment; install repaired or new parts Adhere to all safety policies; wear and operate with a respirator as required; maintain cleanliness of all safety equipment Clean and lubricate shafts, bearings, gears, and related components Install, troubleshoot, and repair electrical equipment and controls Design, assemble, install, and maintain pipe systems and associated hydraulic/pneumatic systems Respond to basic alarms and perform necessary resets Work closely with teammates to coordinate work, share production updates, and complete tasks Physically relocate carts, pallets, and toolboxes as work requires Maintain a clean and safe work area; follow all company policies and procedures Support the Quality Management and Environmental Management Systems Champion continual improvement initiatives and support JSOX compliance Exhibit regular, reliable attendance in a fast-paced manufacturing environment Other duties as assigned What you bring 1 year certificate from a college or technical school; or 3 Experience in a manufacturing environment PLC troubleshooting and PLC programming experience Electrical troubleshooting skills Mechanical troubleshooting skills Equipment troubleshooting across industrial automation Hydraulics experience Troubleshooting industrial automation equipment Tools & tech VFDs PLCs: Fanuc, Omron, Panasonic, Schneider Electric, Beckoff, Modicon, B&R Industrial Automation, Sigmatek Servo motors

Employment Status:Full time Shift:Day (United States of America) Facility:1906 Belleview Ave SE - RoanokeRequisition Number:R154646 Instrumentation Controls Spec. CRMH (Open) How You'll Help Transform Healthcare:The Building Automation Control Specialist supports the maintenance and operations of the building mechanical systems, control systems, chilled water or steam plants and associated metering to ensure building systems are operating within the desired optimal indoor environmental conditions for a variety of work areas including research laboratories. Leads special projects. JOB SCOPE: No supervisory responsibilities or duties. Oversees control projects. May direct contractors, other personnel, or work as a part of a team on specific projects or other work assignments. Orients new employees and may provide guidance to contract staff. May have to respond to outages quickly during periods of inclement weather. Works with other personnel and contractors to achieve optimal indoor environments for a variety of uses. Develops operational procedures and sequence of operations diagrams for systems. Recognizes and resolves issues to maintain environmental integrity and work productivity. Evaluates and recommends improvements to instrumentation. Analyze and improve custom programming to improve environmental conditions or energy efficiencies Installs, performs routine maintenance and inspections to ensure quality work and continues functioning of systems to ensure quality and control costs for large, complex and sophisticated heating, refrigeration, ventilation, air conditioning and water treatment systems and associated controls in an array of settings including large institutional research setting and with a wide variety of systems and equipment. Trouble shoots and repairs problems with HVAC control systems. May work with other trades to maintain, operate and repair controls equipment, including variable frequency drives, building automation systems, etc. Commission and re-commission building systems to ensure design operation. Build and install custom graphics for BAS controls. Install, configure, and program programmable controllers. Develops and maintains documentation and resources regarding controls systems and maintains an updated knowledge of all mechanical and electrical controls systems. May work with leadership, engineers and equipment manufacturers to trend data on systems and help develop programs and practices to improve energy efficiency. What We Require: Education: High school graduate or equivalent education required. Graduate of a trade or vocational school with courses in blueprint reading, mathematics and physics and specialized curriculum in HVAC&R maintenance preferred. Experience: Five years of HVAC & R experience, with specific experience and strong knowledge of digital and pneumatic controls systems, hydronics, refrigeration, building control techniques, and programming. Journey level experience as an HVAC mechanic. Experience using a computer to manage building control systems and/or chilled water systems required. Licensure/certification: CFC certification required. Valid Virginia Driver's license with good driving record required. Other Minimum Qualifications: Knowledge of state and local codes that pertain to the positions area of responsibility. Ability to analyze problems, interpret drawings and specifications. Must possess a good understanding of programming and automated building control. Ability to communicate and work well with others. May be asked to provide basic general purpose maintenance tools. May be required to work additional hours and shifts. Position is deemed emergency personnel during emergency weather conditions. Must travel to different locations to work. ***Note: This job description is only meant to be a representative summary of the major responsibilities and accountabilities performed by the incumbents of this job. The incumbents may be requested to perform job-related tasks other than those stated in this description. Recruiter: KATHRYN LUSHER Recruiter Email: *************************** For more information, contact the HR Service Center at **************. Carilion Clinic is an Equal Opportunity Employer: We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age (40 or older), disability, genetic information, or veterans status. Carilion is a Drug-Free Workplace. For more information or for individuals with disabilities needing special assistance with our online application process contact Carilion HR Service Center at ************, 8:00 a.m. to 4:30 p.m., Monday through Friday. For more information on E-Verify: ******************************************************************* Benefits, Pay and Well-being at Carilion Clinic Carilion understands the importance of prioritizing your well-being to help you develop and thrive. That's why we offer a well-rounded benefits package, and many perks and well-being resources to help you live a happy, healthy life - at work and when you're away. When you make your tomorrow with us, we'll enhance your potential to realize the best in yourself. Below are benefits available to you when you join Carilion: Comprehensive Medical, Dental, & Vision Benefits Employer Funded Pension Plan, vested after five years (Voluntary 403B) Paid Time Off (accrued from day one) Onsite fitness studios and discounts to our Carilion Wellness centers Access to our health and wellness app, Virgin Pulse Discounts on childcare Continued education and training

Cii Service is looking for an HVAC Building Controls Technician / Programmer to join our service team! We offer an entrepreneurial culture that promotes from within our organization and provide strong incentives for great performance. This position is primarily responsible for the installation, programming, commissioning, troubleshooting, repair and maintenance of building automation systems for HVAC and refrigeration equipment. This role ensures optimal system performance, energy efficiency, and occupant comfort by integrating hardware, software, and field devices into functional control solutions. Our current systems include Honeywell, ABB, Distech, and Carrier platforms. Key Responsibilities: Install, program, commission, and repair BAS controls including sensors, actuators, and user interfaces as well as associated HVAC equipment. Program and configure control logic, schedules, trends, and alarms in BAS platforms (Niagara 4, BACnet, or similar). Integrate new systems with existing HVAC, refrigeration, and lighting controls. Troubleshoot and repair BAS hardware, software, and network communication issues remotely and at customer's location. Configure and test controllers, sensors, actuators, and network components. Represent the company by serving as the direct customer contact and is responsible for servicing products and ensuring customer satisfaction. Read and interpret blueprints, schematics, and mechanical, electrical, and control drawings. Travel throughout company's geographic territory for site surveys, examination of building layout, on-site installation, preventive maintenance, repairs, replacement, and modifications as needed or requested by customers. Perform system diagnostics and optimize building performance through automation. Provide technical support and training to service technicians and customers on BAS functionalities. Maintain accurate documentation of service activities, backups and system configuration records. Ensure compliance with company and industry standards for safety and quality. Ability to mentor and train service technicians in all branches on BAS operation and maintenance. Train end users onsite on BAS operation and maintenance. Stay current with BAS technologies, control strategies, and energy efficiency practices. Assist with sales strategies to grow the controls business for all branches. Our Ideal Candidate Has: 2+ years of experience designing, installing, programming, and commissioning Commercial Building Automation Systems. Niagara 4 Certification and proven hands-on experience in BAS programming and commissioning. Familiarity with one or more of the following BAS: Honeywell, ABB, Distech, Johnson Controls, Schneider Electric, Siemens, Trane, or Daikin. Ability to diagnose and repair HVAC systems. Comfortable working in mechanical rooms, rooftops, and other field environments. This highly physical position requires the ability to lift 50 lbs and work on ladders, lifts, and in confined spaces. Tolerance for varying environmental conditions (hot, cold, dusty). A team player mentality and strong ability to solve problems. Familiarity with BACnet, LonWorks, and/or Modbus communication protocols. Knowledge of IT networking, IP addressing, and cybersecurity best practices for BAS. Excellent verbal and written communication skills. A valid driver's license and clean driving record. Why You'll Love Working Here: Competitive pay and benefits package. Company vehicle and tools for fieldwork. Health and Wellness: Comprehensive medical, dental, and vision plans to keep you and your family covered, including free preventive care and affordable prescription options. Life and Disability Insurance: Company-paid life insurance and disability coverage, with options to enhance your benefits. Retirement Savings: 401(k) plan with a generous company match to help secure your future, with immediate vesting. Paid Time Off: Enjoy paid holidays and a PTO plan that grows with your years of service. Opportunities for Career Advancement and Professional Development: We provide education assistance to help you grow your skills and career. Extra Perks: Flexible spending accounts, employee discounts, and 24/7 confidential support through our Employee Assistance Program.

This is a hands-on Engineering Technician position on 3rd shift. Primarily responsible for assistance in daily operations and maintenance of manufacturing processes for manufacturing of night vision systems. Includes optimization of manufacturing processes, implementation of cost reduction opportunities (yield and productivity improvements, waste elimination), and review/disposition of night vision systems and components. A successful candidate will have proficiency in the use of hand and machine tools, precision gauges, test instruments, and process equipment. Candidate must have an understanding and skills in effectively applying Six-Sigma tools to benefit the organization and customers. Additionally, the candidate will be versed in Lean tools and their application to reduce waste. The individual can expect to spend >70% of their time engaging directly with the factory teams on the shop floor. Candidate will perform other duties as assigned. Qualifications: 2-year associate's degree in an Engineering field (Mechanical, Electrical, Mechatronics, etc.) or equivalent relatable experience is required 2+ years of technical experience in a manufacturing environment Strong analytical abilities and trouble-shooting techniques Strong verbal and written communication skills Capable of performing process engineering tasks proportionate to their experience PC proficiency in Microsoft Word, Excel, PowerPoint, and Outlook Must have the ability to work effectively within a team Ability to support the organizational culture and build morale Good interpersonal and organizational skills are required Ability to obtain and maintain a Security Clearance Must be able to comply with OSHA, EPA, Fire Regulations, Company Policies and Procedures Ability to work 3rd shift Preferred skills: Experience with review/inspection of mechanical assemblies, optics and/or soldering Six Sigma certification Experience in the following areas are a plus… Night Vision Goggles, Thermal Imagery Equipment, Optics, Conformance Testing to Mil-Stds

Service Technician _______________________________________________________________ Department: Field Operations Reports to: Area Service Manager FLSA: Non-exempt (Hourly) Schedule: Monday-Thursday, 8am-5pm; Friday 7am-4pm Why You Should Join Us! A comprehensive health plan that includes medical , dental , and vision coverage to ensure you and your family have access to the care you need A 401(k)-retirement plan with a generous company match to help you save for your future and achieve your financial goals Other fringe benefits including Birthday & Anniversary bonus , company-wide discounts , legal services, short & long-term disability, etc. Positive work environments that offer work/life balance and professional growth Mission-driven work making a global impact with local roots The opportunity to have hands on work experience with industry leading , innovative technology Position Summary The Service Technician is responsible for installing, servicing, and troubleshooting alcohol monitoring devices while maintaining a safe, organized work environment and delivering excellent customer service. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Installation, servicing, troubleshooting, and removal of all alcohol monitoring devices Fulfill daily operational duties of assigned facility which include: Operate a clean, organized and hazard free work environment Conducts training sessions covering use of products to customers Maintain a positive and caring atmosphere for customers and employees Consistently perform monthly inventory audits Assist other shops in surrounding area when applicable Management of daily hours, ensuring 40 hours or less weekly Correspondence with management and/or lead technicians when challenges are presented Maintain the integrity, confidentiality, and security of client information Adherence to all state and federal rule, regulation and statute Any other duty, as assigned Qualifications High School Diploma or equivalent 1 years' experience with 12V 1 years' experience in a customer service role Basic computer skills Strong written and verbal communication skills Detail orientation PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to sit, kneel, and stand regularly while installing alcohol monitoring devices into tight spaces. The employee frequently is required to walk, reach or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Overtime is limited but required occasionally, and continuous interruptions require flexibility and a willingness to modify plans and behavior when necessary. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills aptitudes and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills or abilities. The starting pay range for this position is $21.00 to $23.00 hourly. Final compensation will be determined based on experience, qualifications, and overall fit for the role.

Service Technician _______________________________________________________________ Department: Field Operations Reports to: Area Service Manager FLSA: Non-exempt (Hourly) Schedule: Monday-Thursday, 8am-5pm; Friday 7am-4pm Why You Should Join Us! A comprehensive health plan that includes medical, dental, and vision coverage to ensure you and your family have access to the care you need A 401(k)-retirement plan with a generous company match to help you save for your future and achieve your financial goals Other fringe benefits including Birthday & Anniversary bonus, company-wide discounts, legal services, short & long-term disability, etc. Positive work environments that offer work/life balance and professional growth Mission-driven work making a global impact with local roots The opportunity to have hands on work experience with industry leading, innovative technology Position Summary The Service Technician is responsible for installing, servicing, and troubleshooting alcohol monitoring devices while maintaining a safe, organized work environment and delivering excellent customer service. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Installation, servicing, troubleshooting, and removal of all alcohol monitoring devices Fulfill daily operational duties of assigned facility which include: Operate a clean, organized and hazard free work environment Conducts training sessions covering use of products to customers Maintain a positive and caring atmosphere for customers and employees Consistently perform monthly inventory audits Assist other shops in surrounding area when applicable Management of daily hours, ensuring 40 hours or less weekly Correspondence with management and/or lead technicians when challenges are presented Maintain the integrity, confidentiality, and security of client information Adherence to all state and federal rule, regulation and statute Any other duty, as assigned Qualifications High School Diploma or equivalent 1 years' experience with 12V 1 years' experience in a customer service role Basic computer skills Strong written and verbal communication skills Detail orientation PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to sit, kneel, and stand regularly while installing alcohol monitoring devices into tight spaces. The employee frequently is required to walk, reach or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Overtime is limited but required occasionally, and continuous interruptions require flexibility and a willingness to modify plans and behavior when necessary. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills aptitudes and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills or abilities. The starting pay range for this position is $21.00 to $23.00 hourly. Final compensation will be determined based on experience, qualifications, and overall fit for the role.

ProChem is seeking a hard working, experienced electrical technician to join our Water Systems Fabrication & Installation team. You would be responsible for fabricating, installing, and troubleshooting control panels as well as completing the electrical portion of system installations. The ideal candidate will have experience running running conduit, pulling wire, installing filed instrumentation, writing motors, and working with 480VAC, 120VAC, and 24VDC. You will travel frequently within the United States for short and extended periods such as overnight and over weekends (for system installations). Travel is conducted by road or air. If you meet the qualifications listed below and are looking for a challenging and rewarding career, we encourage you to apply for the position. We offer competitive wages, a full benefits package for you and your family, and opportunities for career growth and skills development. Your responsibilities would include: Fabricate and assemble industrial control panels according to specifications Install, wire, and test control panels and field instruments Install conduit and run electrical wiring Read and interpret electrical schematics and diagrams Troubleshoot and diagnose electrical problems in control panels and field instruments Complete electrical portions of system installations, including wiring motors and other equipment Ensure compliance with safety regulation and company policy Perform other related fabrication and installation duties as assigned to support the overall success of the project Required qualifications: High school diploma or equivalent 2+ years of experience as an electrical technician in an industrial setting Experience running conduit, pulling wire, installing filed instrumentation, wiring motors, and working with 480VAC, 120VAC, and 24VDC Ability to read and interpret electrical schematics and diagrams Strong troubleshooting and problem-solving skills Excellent communication and teamwork skills Knowledge of safety regulations Ability to work independently with minimal supervision Physical Demands & Work Environment Works in a variety of conditions, including both indoor and outdoor activities during a variety of weather conditions. Exposed to noise form machinery and a variety of odors. Work hours will vary and overtime hours will be required based on the needs of the project. Moderate activity with bending, stooping, lifting, and ladder work. Working with their hands and feet. Working around electricity, water, plumbing equipment, and a variety of chemicals used for water treatment. Telephone communication is an essential part of the job expectations. May require flexibility in work hours, vacation, and other schedule considerations to successfully support company needs. Works with and/or around energized equipment (control panel fabrication and operation, electrical valves, pumps, etc.), fabrication tools, corrosive chemicals, pressurized equipment, confined spaces, and industrial machinery. Subject to drug screening: preemployment, suspicion-based, post accident, and event-based (such as pre-travel for certain customer sites). Note: The content of this job ad is not designed or intended to cover or contain a comprehensive listing of activities, duties, responsibilities, physical requirements, or skills required of an employee in this position. Duties, responsibilities, and activities may change at any time with or without notice. Please submit a resume to express interest in this position. ProChem Inc. is a custom-tailored industrial water/wastewater treatment solutions provider. We serve heavy industrial manufacturing facilities in the U.S. by providing innovative solutions that are designed specifically to meet their unique needs. Learn more about ProChem at prochemwater.com. ProChem's mission is to advance our customers' water treatment strategies through innovative treatment solutions supported by a comprehensive set of services, while adhering to industry safety, environmental, and ISO standards. Our number one operating priority is to protect people and the environment. The ProChem team consists of chemists, engineers, technicians, and other professionals who dedicate their careers to preserving water quality and availability. Join a team that is engineering customer satisfaction. ProChem is an equal opportunity employer. Employment decisions are based on merit and business needs, and not on race, color, citizenship status, national origin, ancestry, gender identification, sexual orientation, age, religion, creed, disability, marital status, genetic information, status covered as veteran, pregnancy, childbirth, or related medical conditions including lactation, political affiliation, or any other protected status with applicable federal, state, and local laws.. It is the policy of ProChem to comply with all the relevant and applicable provisions of the Americans with Disabilities Act (ADA). PCI prohibits the discrimination against employees and otherwise qualified applicants related to pregnancy, childbirth, or related medical conditions, including lactation, in any term or condition of employment. Reasonable accommodation will be provided to any employee/applicant who cannot, or will not, be able to perform their duties because of pregnancy, childbirth, or related medical conditions, as long as such accommodation does not constitute and undue hardship. The full pregnancy non-discrimination policy will be provided to you upon request or upon disclosure of pregnancy or a related condition. ProChem is a drug-free workplace. We have a standard of conduct, which prohibits the unlawful possession, use, or distribution of illicit drugs and alcohol by employees on ProChem's site and/or client sites as part of ProChem's activities. ProChem will impose disciplinary sanctions in employees ranging from educational and rehabilitation efforts up to and including expulsion or termination of employment and referral for prosecution for violations of the standards of conduct. Each situation is looked at on a case-by-case basis. This company participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Este empleador participa en E-Verify y proporcionara al gobierno federal la informacion de su Formulario I-9 para confirmar que usted esta autorizado para trabajar en los EE.UU. We are unable to provide work VISA sponsorship for this position. Job Type: Full-time Salary: $25.00 - $30.00 per hour Benefits: 401(k) Dental insurance Employee assistance program Health insurance Health savings account Life insurance Paid time off Parental leave Professional development assistance Vision insurance Schedule: Day shift Application Question(s): We conduct preemployment background and drug screening, and job offers are contingent upon the results meeting policy guidelines. Results that do not meet policy guidelines will undergo an inquiry. If policy guidelines prevent it, the hiring process may be terminated. It is advisable that you take this into account before making final decisions related to current employment if an offer is extended to you. Do you understand and acknowledge this notification? Are you legally authorized to work in the United States? Will you now, or in the future, require sponsorship for employment visa status (e.g. H-1B visa status)? Experience: Electrical: 2 years (Required) Electrical wiring: 2 years (Required) 480VAC, 120VAC, 24VDC: 2 years (Required) running conduit: 2 years (Required) License/Certification: Driver's License (Required) Willingness to travel: 25% (Required) Work Location: Multiple locations View all jobs at this company

Our client is looking for an Engineering Technician to join the team in Roanoke, VA This role is meant to be long term and provides full training. The company is a national electrical engineering firm. Will provide equipment and train on processes and software used. The role is focused on data collection and assessments for clients within the power utility space. Looking for eager employees who want to learn! We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements -HS Diploma -open to associate ideally in engineering -Interest in learning about utilities, specifically the power distribution space Past experience in utilities, telecom, power distribution, etc.

We are seeking an Engineering Designer/Drafter to join our team in Roanoke, VA. This role is ideal for individuals who enjoy combining technical expertise with problem-solving to deliver safe, cost-effective, and reliable facility designs for residential, commercial, and industrial projects. As an Engineering Designer/Drafter, you will gain hands-on experience with design software, construction practices, and utility standards while supporting projects that directly impact safety, efficiency, and service reliability. This position offers opportunities to collaborate with cross-functional teams, build client relationships, and grow under the mentorship of experienced engineers and project leaders. Key Responsibilities: * Ensure strict adherence to all safety policies and procedures. * Apply codes, regulations, and company/client standards to design projects. * Prepare project/job packages including material lists, requisitions, labor estimates, and detailed drawings. * Develop proficiency in design software and work management tools. * Conduct site visits safely and effectively, interacting with field/construction personnel. * Evaluate electrical distribution equipment loading, such as transformers and fusing. * Learn utility construction practices across public right-of-way (ROW) and private property. * Communicate project status to meet client expectations and deadlines. * Maintain accurate and organized records, files, and documentation. * Build positive relationships with internal teams, external clients, and construction crews. * Support storm restoration activities as needed (Driver, Wire Down Sitter, or Clerk). * Perform other duties as assigned. Required Skills/Education: * Strong interpersonal skills with the ability to work across diverse teams and backgrounds. * Self-motivated, reliable, and detail-oriented with strong technical aptitude. * Excellent time management and organizational skills. * Strong communication skills, both written and verbal. * Proficiency with Microsoft Office Suite (Word, Excel, Outlook). * Ability to manage multiple tasks and meet deadlines. * Valid driver's license and reliable vehicle (mileage reimbursement may apply). * Willingness to learn, grow, and take direction from senior staff and mentors. About Seneca Resources At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 companies to government organizations, we connect professionals with opportunities to advance their careers while making a meaningful impact. When you work with Seneca, you're choosing a company that invests in your success, celebrates your achievements, and supports your long-term goals. We offer competitive pay, comprehensive health, dental, and vision coverage, 401(k) retirement plans, and a dedicated team to advocate for you every step of the way. We are an Equal Opportunity Employer and value the strength that diversity brings to our workforce.

Riddleberger Brothers, Inc. is seeking to hire a talented and growth-minded individual to join our team as a Commercial HVAC Controls Technician. We offer career opportunities that allow you to be part of a team and grow as an individual. We offer you: * Competitive pay * Comprehensive benefits package * Apprenticeship opportunities with a pathway to licensure * Growth and development opportunities * Scholarship program for our employees' children * Discounts at major automotive, computer, and cell phone companies * Employee referral incentives * Available with certain positions, where necessary/required: * Company mobile phone and/or tablet * Company vehicle * Company uniforms * And much more! Our benefits package offers you: * Medical, Dental, Vision, and Life Insurances * Short-Term and Long-Term Disability Insurances * Accidental Death & Dismemberment Insurance * Health Care and Dependent Day Care FSA's * Health Savings Account (HSA) * Employee Assistance Program (EAP) * 401(k) Plan with Roth IRA option * Pet Insurance * Annual Bonus * Generous Vacation, Holidays, and Sick Time * And much more! About us: We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. * Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841 * Parent Company - Comfort Systems USA (******************************* Primary purpose of this position: Perform installation, diagnosis, troubleshooting and repair of HVAC Building Automation and controls systems. Specific Job Duties: * Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems * Possesses previous experience working with Honeywell WEBS, LON, BACnet, Tridium, JCI Facility Explorer control systems * Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems * Possess analytical and problem-solving skills for resolution of engineering problems and understanding of technical data * Ability to install Building Automation Systems from drawings, submittals and specifications * Possess excellent communication and customer services skills * Ability to work independently without direct supervision * Knowledge of HVAC Mechanical equipment: Large Split systems, Chillers, Boilers, VAV's, Water Source Heat Pumps, CW/HW pumps and starters, etc. * Maintains, inspects, and repairs pneumatic and electronic, electric DDC HVAC system controls. * Performs troubleshooting tasks, including problem diagnosis, identification and isolation. Discusses system malfunctions with users to assist in isolation of problem. Determines appropriate action for problem resolution. * Uses TAB techniques to perform diagnostic duties and make repairs to systems. * Inspects systems to verify system compliance with plans and specifications and to detect malfunctions in system component parts. * Studies building system design, as-built blueprints, HVAC systems diagrams, technical specifications and system configurations. Tests component and system performance to determine the need for adjustment or repair, develop methods to resolve performance problems in the most efficient and cost-effective manner. * Programs, designs and modifies HVAC sub-systems of electronic building automation systems. * Consults with engineers and contractors as necessary regarding system operation and configuration. * Orders appropriate materials, components, and equipment necessary for efficient system operation. * Performs other related work as required in support of general HVAC maintenance activity. Other Requirements: * High School Diploma or GED * Minimum 4 years of experience in the trade, which may include an apprenticeship and/or applicable vocational training, should include some experience in HVAC trade as a service or maintenance technician. * Minimum 2 years automated system controls-related experience or equivalent formal training in automated systems controls operations * Knowledge of the test and diagnostic equipment and instruments and hand and power tools used in this work * Ability to read and analyze building blueprints and HVAC systems diagrams and specifications * Tridium Niagara N4 certification a plus * Punctual and regular attendance * Ability to work on a team and interact with people * Ability to communicate effectively with engineers, craftsmen, contractors, vendors and system users orally and in writing * Valid driver's license and ability to meet company driver qualification policy * Follow and adhere to all company safety requirements and processes * Work flexible hours as needed

Riddleberger Brothers, Inc. is seeking to hire a talented and growth-minded individual to join our team as a Commercial HVAC Controls Technician. We offer career opportunities that allow you to be part of a team and grow as an individual. We offer you: Competitive pay Comprehensive benefits package Apprenticeship opportunities with a pathway to licensure Growth and development opportunities Scholarship program for our employees' children Discounts at major automotive, computer, and cell phone companies Employee referral incentives Available with certain positions, where necessary/required: Company mobile phone and/or tablet Company vehicle Company uniforms And much more! Our benefits package offers you: Medical, Dental, Vision, and Life Insurances Short-Term and Long-Term Disability Insurances Accidental Death & Dismemberment Insurance Health Care and Dependent Day Care FSA's Health Savings Account (HSA) Employee Assistance Program (EAP) 401(k) Plan with Roth IRA option Pet Insurance Annual Bonus Generous Vacation, Holidays, and Sick Time And much more! About us: We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841 Parent Company - Comfort Systems USA (******************************* Primary purpose of this position: Perform installation, diagnosis, troubleshooting and repair of HVAC Building Automation and controls systems. Specific Job Duties: Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems Possesses previous experience working with Honeywell WEBS, LON, BACnet, Tridium, JCI Facility Explorer control systems Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems Possess analytical and problem-solving skills for resolution of engineering problems and understanding of technical data Ability to install Building Automation Systems from drawings, submittals and specifications Possess excellent communication and customer services skills Ability to work independently without direct supervision Knowledge of HVAC Mechanical equipment: Large Split systems, Chillers, Boilers, VAV's, Water Source Heat Pumps, CW/HW pumps and starters, etc. Maintains, inspects, and repairs pneumatic and electronic, electric DDC HVAC system controls. Performs troubleshooting tasks, including problem diagnosis, identification and isolation. Discusses system malfunctions with users to assist in isolation of problem. Determines appropriate action for problem resolution. Uses TAB techniques to perform diagnostic duties and make repairs to systems. Inspects systems to verify system compliance with plans and specifications and to detect malfunctions in system component parts. Studies building system design, as-built blueprints, HVAC systems diagrams, technical specifications and system configurations. Tests component and system performance to determine the need for adjustment or repair, develop methods to resolve performance problems in the most efficient and cost-effective manner. Programs, designs and modifies HVAC sub-systems of electronic building automation systems. Consults with engineers and contractors as necessary regarding system operation and configuration. Orders appropriate materials, components, and equipment necessary for efficient system operation. Performs other related work as required in support of general HVAC maintenance activity. Other Requirements: High School Diploma or GED Minimum 4 years of experience in the trade, which may include an apprenticeship and/or applicable vocational training, should include some experience in HVAC trade as a service or maintenance technician. Minimum 2 years automated system controls-related experience or equivalent formal training in automated systems controls operations Knowledge of the test and diagnostic equipment and instruments and hand and power tools used in this work Ability to read and analyze building blueprints and HVAC systems diagrams and specifications Tridium Niagara N4 certification a plus Punctual and regular attendance Ability to work on a team and interact with people Ability to communicate effectively with engineers, craftsmen, contractors, vendors and system users orally and in writing Valid driver's license and ability to meet company driver qualification policy Follow and adhere to all company safety requirements and processes Work flexible hours as needed

This is a hands-on Engineering Technician position on 3rd shift. Primarily responsible for assistance in daily operations and maintenance of manufacturing processes for manufacturing of night vision systems. Includes optimization of manufacturing processes, implementation of cost reduction opportunities (yield and productivity improvements, waste elimination), and review/disposition of night vision systems and components. A successful candidate will have proficiency in the use of hand and machine tools, precision gauges, test instruments, and process equipment. Candidate must have an understanding and skills in effectively applying Six-Sigma tools to benefit the organization and customers. Additionally, the candidate will be versed in Lean tools and their application to reduce waste. The individual can expect to spend >70% of their time engaging directly with the factory teams on the shop floor. Candidate will perform other duties as assigned. Preferred skills: Experience with review/inspection of mechanical assemblies, optics and/or soldering Six Sigma certification Experience in the following areas are a plus… Night Vision Goggles, Thermal Imagery Equipment, Optics, Conformance Testing to Mil-Stds Qualifications: 2-year associate's degree in an Engineering field (Mechanical, Electrical, Mechatronics, etc.) or equivalent relatable experience is required 2+ years of technical experience in a manufacturing environment Strong analytical abilities and trouble-shooting techniques Strong verbal and written communication skills Capable of performing process engineering tasks proportionate to their experience PC proficiency in Microsoft Word, Excel, PowerPoint, and Outlook Must have the ability to work effectively within a team Ability to support the organizational culture and build morale Good interpersonal and organizational skills are required Ability to obtain and maintain a Security Clearance Must be able to comply with OSHA, EPA, Fire Regulations, Company Policies and Procedures Ability to work 3rd shift Why Roanoke, Virginia? Lower cost of living Family-friendly area Career and economic growth Scenic beauty Outdoor enthusiast's dream Here Are Some of the Great Benefits We Offer: Most locations offer a 9/80 schedule, providing every other Friday off Competitive compensation & 401(k) program to plan for your future Robust medical, dental, vision, & disability coverage with qualified wellness discounts Basic Life Insurance and Additional Life & AD&D Insurances are available Flexible Vacation & PTO Paid Parental Leave Generous Employee Referral Program Voluntary Benefits Available: Longer Term Care, Legal, Identity Theft, Pet Insurance, and more Voluntary Tricare Supplement available for military retirees This does not list all the duties of the job. You may be asked by your supervisors or managers to perform other duties. The employer has the right to revise this at any time. The job description is not an employment contract. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Elbit America is an equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities. *** If you encounter issues with your application, please email ********************************** ***

Service Technician _______________________________________________________________ Department: Field Operations Reports to: Area Service Manager FLSA: Non-exempt (Hourly) Schedule: Monday-Thursday, 8am-5pm; Friday 7am-4pm Why You Should Join Us! A comprehensive health plan that includes medical, dental, and vision coverage to ensure you and your family have access to the care you need A 401(k)-retirement plan with a generous company match to help you save for your future and achieve your financial goals Other fringe benefits including Birthday & Anniversary bonus, company-wide discounts, legal services, short & long-term disability, etc. Positive work environments that offer work/life balance and professional growth Mission-driven work making a global impact with local roots The opportunity to have hands on work experience with industry leading, innovative technology Position Summary The Service Technician is responsible for installing, servicing, and troubleshooting alcohol monitoring devices while maintaining a safe, organized work environment and delivering excellent customer service. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Installation, servicing, troubleshooting, and removal of all alcohol monitoring devices Fulfill daily operational duties of assigned facility which include: Operate a clean, organized and hazard free work environment Conducts training sessions covering use of products to customers Maintain a positive and caring atmosphere for customers and employees Consistently perform monthly inventory audits Assist other shops in surrounding area when applicable Management of daily hours, ensuring 40 hours or less weekly Correspondence with management and/or lead technicians when challenges are presented Maintain the integrity, confidentiality, and security of client information Adherence to all state and federal rule, regulation and statute Any other duty, as assigned Qualifications High School Diploma or equivalent 1 years' experience with 12V 1 years' experience in a customer service role Basic computer skills Strong written and verbal communication skills Detail orientation PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to sit, kneel, and stand regularly while installing alcohol monitoring devices into tight spaces. The employee frequently is required to walk, reach or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Overtime is limited but required occasionally, and continuous interruptions require flexibility and a willingness to modify plans and behavior when necessary. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills aptitudes and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills or abilities. The starting pay range for this position is $21.00 to $23.00 hourly. Final compensation will be determined based on experience, qualifications, and overall fit for the role.

Our client is looking for an Engineering Designer to join the team! This is an onsite position in Roanoke, VA. Will be fully in the office to design a variety of work orders focused on Power and Electrical Distribution projects. The role utilizes client-specific software and offers full training! This company offers room for growth with exposure to different projects and teams! This is a long term, stable opportunity. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements Associates or Bachelors in Engineering-related field, example degrees: Engineering Technology, Applied Sciences, Mathematics, Geography, Construction Management, etc Ability to sit onsite Great customer service skills Utilities, Electrical, or Power Distribution experience

Service Technician _______________________________________________________________ Department: Field Operations Reports to: Area Service Manager FLSA: Non-exempt (Hourly) Schedule: Monday-Thursday, 8am-5pm; Friday 7am-4pm Why You Should Join Us! A comprehensive health plan that includes medical, dental, and vision coverage to ensure you and your family have access to the care you need A 401(k)-retirement plan with a generous company match to help you save for your future and achieve your financial goals Other fringe benefits including Birthday & Anniversary bonus, company-wide discounts, legal services, short & long-term disability, etc. Positive work environments that offer work/life balance and professional growth Mission-driven work making a global impact with local roots The opportunity to have hands on work experience with industry leading, innovative technology Position Summary The Service Technician is responsible for installing, servicing, and troubleshooting alcohol monitoring devices while maintaining a safe, organized work environment and delivering excellent customer service. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Installation, servicing, troubleshooting, and removal of all alcohol monitoring devices Fulfill daily operational duties of assigned facility which include: Operate a clean, organized and hazard free work environment Conducts training sessions covering use of products to customers Maintain a positive and caring atmosphere for customers and employees Consistently perform monthly inventory audits Assist other shops in surrounding area when applicable Management of daily hours, ensuring 40 hours or less weekly Correspondence with management and/or lead technicians when challenges are presented Maintain the integrity, confidentiality, and security of client information Adherence to all state and federal rule, regulation and statute Any other duty, as assigned Qualifications High School Diploma or equivalent 1 years' experience with 12V 1 years' experience in a customer service role Basic computer skills Strong written and verbal communication skills Detail orientation PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to sit, kneel, and stand regularly while installing alcohol monitoring devices into tight spaces. The employee frequently is required to walk, reach or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Overtime is limited but required occasionally, and continuous interruptions require flexibility and a willingness to modify plans and behavior when necessary. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills aptitudes and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills or abilities. The starting pay range for this position is $21.00 to $23.00 hourly. Final compensation will be determined based on experience, qualifications, and overall fit for the role.