Controls technician jobs in Spring Valley, NY

As an Automation Technician, you will work with the maintenance team to maintain and repair conveyance, automation and facilities equipment to support operations uptime and improve reliability of our systems. This role is the resident expert in mechanical, electrical and/or refrigeration systems. Shift: Wednesday to Saturday - 9:00pm to 7:30am You will.. Lead and educate compliance with all safety, food safety, and security standards. Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed. Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting. Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate. Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment specializing in mechanical, electrical, and refrigeration. Lead root cause analysis of major downtime events. Act as a network resource for technical issues and lead network-wide root cause analysis. Develop maintenance personnel knowledge on intermediate to advanced mechanical, electrical, and refrigeration. Audit maintenance personnel work and provide feedback to improve performance and quality. Audit vendor work to provide feedback to leadership on quality of work and SLA performance. Write and/or modify PMs to standardize across the network and increase effectiveness. Perform building project work as assigned. You have.. 4-6 years of experience with conveyor, automation, robotics, and/or refrigeration repair and maintenance including mechanical and electrical operations. Advanced understanding of machinery and equipment. Basic computer skills. Ability to read and understand drawings, schematics and diagrams. Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems. Ability to travel as necessary (up to 10%) for business purposes. High School diploma or equivalent. Excellent follow through, judgment, and common sense. "Make it happen" attitude. Mechatronics associates degree or equivalent preferred. You'll get… Competitive hourly rate, 401K company match that vests immediately upon participation Generous PTO and additional sick leave Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_) Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+ Inclusive, collaborative, and dynamic work environment within a fast-paced, mission-driven company that is disrupting the traditional food supply chain This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors. Newark, NJ Pay Range$39.50-$39.50 USD

Join our dynamic team to navigate complex risk landscapes and fortify technology governance, making a pivotal impact in our firm's robust risk strategy. As a Tech Risk and Controls - Tech Issue Management Oversight & Execution within the Technology Risk & Services team, you will contribute to the successful management of technology-aligned aspects of Governance, Risk, and Compliance in line with the firm's standards. Leverage your broad knowledge in risk management principles and practices to assess and monitor risks and implement effective controls. Your role in risk identification, control evaluation, and security governance is crucial in advising on complex situations and enhancing the firm's risk posture. Through collaboration and analytical skills, you will contribute to the overall success of the Technology Risk & Services team and ensure compliance with regulatory obligations and industry standards. Job responsibilities Assess and monitor technology risks, ensuring compliance with firm standards, regulatory requirements, and industry best practices Support implementation of effective controls in collaboration with cross-functional teams and stakeholders Evaluate the effectiveness of existing controls, identify gaps, and recommend improvements to mitigate risks and enhance the firm's risk posture Analyze complex situations, provide advice on risk management strategies, and support the implementation of risk mitigation measures Required qualifications, capabilities, and skills 3+ years of experience or equivalent expertise in technology risk management, information security, or a related field, with a focus on risk identification, assessment, and mitigation Experience in risk identification, assessment, and control evaluation, with a strong understanding of industry standards Demonstrated ability to analyze complex issues, develop and implement risk mitigation strategies, and communicate effectively with senior stakeholders Proficient knowledge of risk management frameworks, regulations, and industry best practices Preferred qualifications, capabilities, and skills CISM, CRISC, CISSP, or other industry-recognized risk certifications

Benefits: 401(k) 401(k) matching Dental insurance Health insurance Training & development Vision insurance About us: BROAD U.S.A. is a privately held company headquartered in Hackensack, New Jersey. BROAD delivers innovative solutions in three product areas: • Absorption chiller and Electrical chiller • Air Purification, Filtration and Ventilation systems • Modular construction: Holon sustainable modular building system About the role: We are seeking a Building Automation Systems (BMS) Controls Technician to join our growing team. Qualified candidates will work with project managers on designing, specifying, programming and integrating new and existing building management systems. Candidate will also work with technical support & monitoring personnel on ongoing troubleshooting and support. This role is critical to our growing business and ensure our clients achieve energy efficiency and system optimization. Key Responsibilities: • Perform necessary software programming, equipment start-up, tuning and calibration, commissioning and integration of HVAC controls, DDC systems and BMS software. • Conduct preventative maintenance and respond to emergency service calls on existing BMS systems. • Troubleshoot and repair control system installations independently, ensuring performance standards are met. • Effectively communicate with customers to evaluate service needs, maintain proper scheduling and ensure high levels of customer satisfaction. • Monitor customer buildings to ensure optimum performance standards are being achieved. • Be proficient in knowledge of cooling and heating systems. • Identify opportunities for additional building enhancements and perform upgrades and/or small-scale retrofits on existing systems. • Keep updated with industry developments and building control system, particularly in energy-saving strategies and new technologies. • Candidates should anticipate a portion of the time will require travel to customer locations throughout North America. Qualifications: • 2+ years of experience in HVAC control systems and/or building automation, including servicing and commissioning electronic controls. • Strong knowledge of BMS protocols such as BACnet, Modbus, Lonworks, Tridium/Niagara and experience working with Delta Controls, JCI, and Andover based BMS systems • Hands-on experience with system design, integration, and troubleshooting, including both legacy and new systems. • Familiarity with mechanical and electrical systems as part of construction and building automation system. • Ability to work on-site, including in confined spaces, on ladders, and with equipment weighing up to 50 lbs. • Competency in Microsoft Word, Excel, and AutoCAD for creating and managing project documentation. • Preferred Experience working with systems from Delta Controls, JCI, Andover, and Tridium. • Strong organizational, communication, and problem-solving skills. • Ability to manage customer relations and work effectively in a team to meet project deadlines. • Performing other duties as assigned by Project Manager • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related fields is a plus. Benefits: • Competitive salary is based on experience • 401(k) plan with company match • Comprehensive health insurance (Medical, Dental, Vision, Life) • Paid Time Off and company holidays BROAD is an equal opportunity employer Compensation: $50,000.00 - $80,000.00 per year BROAD U.S.A. is a privately held company headquartered in New Jersey, supporting the sales and service to our customers in North America. Relying on our innovative and environmental-friendly technology, BROAD U.S.A commits itself to optimize energy efficiency for clients in Commercial, Civil and Industrial markets. BROAD U.S.A. is committed to the Absorption Marketplace - It is our primary business since we started in 1998 Broad is dedicated and focused on ensuring our owners can always find proper training, service and after sale support with replacement parts and or units. Broad is committed to the inherent value and flexible solutions that thermally driven absorption plays in our modern world. We Roll Our Own - Absorbers Absorption design is our core competency and primary focus Unlike many current players in the absorption market, Broad designed and created its first absorber in 1988 with its own human capital, hard work, the desire to be the best.

JobID: 210688291 JobSchedule: Full time JobShift: Base Pay/Salary: Jersey City,NJ $114,000.00-$155,000.00 Join our dynamic team to navigate complex risk landscapes and fortify technology governance, making a pivotal impact in our firm's robust risk strategy. As a Tech Risk and Controls - Tech Issue Management Oversight & Execution within the Technology Risk & Services team, you will contribute to the successful management of technology-aligned aspects of Governance, Risk, and Compliance in line with the firm's standards. Leverage your broad knowledge in risk management principles and practices to assess and monitor risks and implement effective controls. Your role in risk identification, control evaluation, and security governance is crucial in advising on complex situations and enhancing the firm's risk posture. Through collaboration and analytical skills, you will contribute to the overall success of the Technology Risk & Services team and ensure compliance with regulatory obligations and industry standards. Job responsibilities * Assess and monitor technology risks, ensuring compliance with firm standards, regulatory requirements, and industry best practices * Support implementation of effective controls in collaboration with cross-functional teams and stakeholders * Evaluate the effectiveness of existing controls, identify gaps, and recommend improvements to mitigate risks and enhance the firm's risk posture * Analyze complex situations, provide advice on risk management strategies, and support the implementation of risk mitigation measures Required qualifications, capabilities, and skills * 3+ years of experience or equivalent expertise in technology risk management, information security, or a related field, with a focus on risk identification, assessment, and mitigation * Experience in risk identification, assessment, and control evaluation, with a strong understanding of industry standards * Demonstrated ability to analyze complex issues, develop and implement risk mitigation strategies, and communicate effectively with senior stakeholders * Proficient knowledge of risk management frameworks, regulations, and industry best practices Preferred qualifications, capabilities, and skills * CISM, CRISC, CISSP, or other industry-recognized risk certifications

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Health insurance Training & development Vision insurance About us: BROAD U.S.A. is a privately held company headquartered in Hackensack, New Jersey. BROAD delivers innovative solutions in three product areas: Absorption chiller and Electrical chiller Air Purification, Filtration and Ventilation systems Modular construction: Holon sustainable modular building system About the role: We are seeking a Building Automation Systems (BMS) Controls Technician to join our growing team. Qualified candidates will work with project managers on designing, specifying, programming and integrating new and existing building management systems. Candidate will also work with technical support & monitoring personnel on ongoing troubleshooting and support. This role is critical to our growing business and ensure our clients achieve energy efficiency and system optimization. Key Responsibilities: Perform necessary software programming, equipment start-up, tuning and calibration, commissioning and integration of HVAC controls, DDC systems and BMS software. Conduct preventative maintenance and respond to emergency service calls on existing BMS systems. Troubleshoot and repair control system installations independently, ensuring performance standards are met. Effectively communicate with customers to evaluate service needs, maintain proper scheduling and ensure high levels of customer satisfaction. Monitor customer buildings to ensure optimum performance standards are being achieved. Be proficient in knowledge of cooling and heating systems. Identify opportunities for additional building enhancements and perform upgrades and/or small-scale retrofits on existing systems. Keep updated with industry developments and building control system, particularly in energy-saving strategies and new technologies. Candidates should anticipate a portion of the time will require travel to customer locations throughout North America. Qualifications: 2+ years of experience in HVAC control systems and/or building automation, including servicing and commissioning electronic controls. Strong knowledge of BMS protocols such as BACnet, Modbus, Lonworks, Tridium/Niagara and experience working with Delta Controls, JCI, and Andover based BMS systems Hands-on experience with system design, integration, and troubleshooting, including both legacy and new systems. Familiarity with mechanical and electrical systems as part of construction and building automation system. Ability to work on-site, including in confined spaces, on ladders, and with equipment weighing up to 50 lbs. Competency in Microsoft Word, Excel, and AutoCAD for creating and managing project documentation. Preferred Experience working with systems from Delta Controls, JCI, Andover, and Tridium. Strong organizational, communication, and problem-solving skills. Ability to manage customer relations and work effectively in a team to meet project deadlines. Performing other duties as assigned by Project Manager Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related fields is a plus. Benefits: Competitive salary is based on experience 401(k) plan with company match Comprehensive health insurance (Medical, Dental, Vision, Life) Paid Time Off and company holidays BROAD is an equal opportunity employer

WHAT YOU DO AT AMD CHANGES EVERYTHING At AMD, our mission is to build great products that accelerate next-generation computing experiences-from AI and data centers, to PCs, gaming and embedded systems. Grounded in a culture of innovation and collaboration, we believe real progress comes from bold ideas, human ingenuity and a shared passion to create something extraordinary. When you join AMD, you'll discover the real differentiator is our culture. We push the limits of innovation to solve the world's most important challenges-striving for execution excellence, while being direct, humble, collaborative, and inclusive of diverse perspectives. Join us as we shape the future of AI and beyond. Together, we advance your career. THE ROLE: AMD's Data Center Platform Engineering Group {DPEG} is designing, building and delivering innovative technology infrastructure enabling the digital world. We create cloud-enabling server solutions that help the world's leading companies turn their ideas into reality. Our customers are future-focused and so are we, always a step ahead of the next challenge. As experts in engineering, manufacturing, and supply chain, we're the bridge between problem and solution for the world's leading cloud and telecom providers. Our customers depend on us to solve their most complex server design needs. Come and join our Data Center Platform Engineering Group where we are building amazing, powered products with amazing people. This is an exciting role in which you will have great exposure to the latest technologies in the industry. In this role, you will be working as a member of the system development team. The position will handle multiple projects simultaneously, maintain project schedules/deadlines. Assist engineering projects by assembling, testing, refining prototypes, and evaluating new electronic components. You will be working closely with multiple engineering organizations. THE PERSON: If you are passionate about finding and resolving issues and thrive in fast-paced, technically challenging environments where you work on various problems, and exposure to the latest technology this could be the perfect opportunity. This position requires a theoretical knowledge of engineering, specifically electronic and electrical engineering, as well being heavily involved with hands-on. The position will utilize tools and technologies including electronic and computer hardware, architecture, and components; soldering tools for circuit boards and electronics; Linux and widows-based diagnostic/test programs to benchmark electronic component performance. KEY RESPONSIBILITIES: * Build, debug, test, repair, and upgrade computer prototypes (computers, servers, peripherals, programs, and software/firmware). * Proficient in hand soldering. * Assist engineers in the evaluation, design, and test of new electronic components. * Document prototype construction and maintain pertinent engineering records. * Write procedures and various technical documents. * Perform Lab Management responsibilities to maintain and organize a clean and efficient lab. * Materials management to inventory/track/ship materials. * Utilize analytical thinking and problem-solving skills to perform the above. PREFERRED QUALIFICATIONS: * Experienced in engineering test, debugging, tech support, or relevant experience. Experience within a computer hardware environment preferred. * Fundamental understanding of computer architecture and components (CPU, power supply, memory, graphics cards, flash memory, etc.) * Strong demonstrated soldering skills. Knowledge of circuit boards, soldering, and electronics * Ability to diagnose the root cause of computer system failure and isolate the components/failure nodes * Ability to use custom Linux and Windows-based diagnostic/test programs to run benchmarks/tests on electronic components' performance * Understanding of hardware and software interactions; able to apply this understanding to resolve issues * Excellent verbal and written communication skills * Strong interpersonal skills and the ability to interact with people at various levels in the organization * Analytical thinking and problem-solving ability; use rigorous logic to solve problems * Understands and uses speed as a competitive advantage; completes tasks on time * Lab Management and Organizing skill for maintaining clean and efficient labs. ACADEMIC CREDENTIALS: Associate's degree (or above) in Electronics, Certificate of Completion of Technical School, or equivalent combination of education and/or experience preferred This role is not eligible for Visa sponsorship. #LI-CB1 Benefits offered are described: AMD benefits at a glance. AMD does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. AMD and its subsidiaries are equal opportunity, inclusive employers and will consider all applicants without regard to age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates and will accommodate applicants' needs under the respective laws throughout all stages of the recruitment and selection process.

What you'll bring to the team At LEGOLAND New York Resort - Earn AWESOME Benefits, Build AWESOME Memories, and Make an AWESOME Difference. With our Theme Park, Hotels, Mini-Land and more - the opportunities here at LEGOLAND are endless! In this role you will be a part of the Technical Service's Controls Team. As a part of this team, you will support Controls and Rides Maintenance teams ensuring our rides / shows are inspected, maintained, and repaired to the highest levels possible. ( Tools are provided ) Role Description: Work with the Control's management and lead to make sure all ride and themed systems are functioning as intended - safe and efficiently. Complete daily, weekly, monthly, and annual inspections of all rides control and electrical systems. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Perform reactive and proactive maintenance on all ride and attractions control and electrical equipment. Document all work through our enterprise asset management system. Work side by side with the Rides Maintenance Technicians to ensure daily inspections are completed. Lend mutual aid to Maintenance department during reactive and preventive maintenance to ensure both mechanical and controls are thoroughly checked and complete. Systems: 70V Audio systems. QSC Q-SYS Core Controllers and amplifiers. Aligning and Setting up Projector Screens. Troubleshooting HDMI over ethernet extenders. Audio, video, atmospheric, and special effects set-ups for park events. Troubleshooting VLAN, WLAN and automated control devices. Troubleshooting CCTV camera monitoring systems both analog and network based PoE. Operating electrical meters, multimeters, clamp, insulation, earth ground tester, rotation meter, power analyzers, and power oscilloscopes. Our work covers multiple communication protocols such as Ethernet IP, Profibus, CIP, EtherCAT, Modbus, and SERCOS. Troubleshooting and analyzing relay logic wiring and reading schematics. Troubleshooting control equipment and logic-based controllers such as Allen Bradley, Siemens, and Beckhoff. Working on 24-volt control systems within 480-volt cabinets. Electric motors. Safety Requirements: It is of paramount importance that the safety of our employees and our guests is our number one priority. We bring an in-depth knowledge of electrical safety to the table. We understand the lock-out tag-out procedure and its importance. We maintain high attention to detail in all aspects, when dealing with life safety electrical equipment in all settings. We continually train to the latest safety standards and revisit often. Qualifications & Experience About You Friendly, outgoing personality. Well-groomed appearance. Work as part of a team. Excellent troubleshooting skills. Dependable and Responsible. Ability to work outdoors in any weather condition. Ability to stand/walk for extended periods of time, and long distances. Flexible availability around park hours - rotating shifts. Ability to work nights/weekends/holidays through agreed upon employment. Ability and willingness to learn. Ability to lift up to 50 pounds. Ability to work at heights. IT experience would be a plus. Electrically and mechanically inclined. Excellent communication skills verbally and written, and the ability to use common computer programs such as Microsoft Teams and Outlook. Pay Range Compensation between USD $21.32/Hr.-USD $28.43/Hr.

What you'll bring to the team At LEGOLAND New York Resort - Earn AWESOME Benefits, Build AWESOME Memories, and Make an AWESOME Difference. With our Theme Park, Hotels, Mini-Land and more - the opportunities here at LEGOLAND are endless! In this role you will be a part of the Technical Service's Controls Team. As a part of this team, you will support Controls and Rides Maintenance teams ensuring our rides / shows are inspected, maintained, and repaired to the highest levels possible. ( Tools are provided ) Role Description: Work with the Control's management and lead to make sure all ride and themed systems are functioning as intended - safe and efficiently. Complete daily, weekly, monthly, and annual inspections of all rides control and electrical systems. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Perform reactive and proactive maintenance on all ride and attractions control and electrical equipment. Document all work through our enterprise asset management system. Work side by side with the Rides Maintenance Technicians to ensure daily inspections are completed. Lend mutual aid to Maintenance department during reactive and preventive maintenance to ensure both mechanical and controls are thoroughly checked and complete. Systems: 70V Audio systems. QSC Q-SYS Core Controllers and amplifiers. Aligning and Setting up Projector Screens. Troubleshooting HDMI over ethernet extenders. Audio, video, atmospheric, and special effects set-ups for park events. Troubleshooting VLAN, WLAN and automated control devices. Troubleshooting CCTV camera monitoring systems both analog and network based PoE. Operating electrical meters, multimeters, clamp, insulation, earth ground tester, rotation meter, power analyzers, and power oscilloscopes. Our work covers multiple communication protocols such as Ethernet IP, Profibus, CIP, EtherCAT, Modbus, and SERCOS. Troubleshooting and analyzing relay logic wiring and reading schematics. Troubleshooting control equipment and logic-based controllers such as Allen Bradley, Siemens, and Beckhoff. Working on 24-volt control systems within 480-volt cabinets. Electric motors. Safety Requirements: It is of paramount importance that the safety of our employees and our guests is our number one priority. We bring an in-depth knowledge of electrical safety to the table. We understand the lock-out tag-out procedure and its importance. We maintain high attention to detail in all aspects, when dealing with life safety electrical equipment in all settings. We continually train to the latest safety standards and revisit often. Qualifications & Experience About You Friendly, outgoing personality. Well-groomed appearance. Work as part of a team. Excellent troubleshooting skills. Dependable and Responsible. Ability to work outdoors in any weather condition. Ability to stand/walk for extended periods of time, and long distances. Flexible availability around park hours - rotating shifts. Ability to work nights/weekends/holidays through agreed upon employment. Ability and willingness to learn. Ability to lift up to 50 pounds. Ability to work at heights. IT experience would be a plus. Electrically and mechanically inclined. Excellent communication skills verbally and written, and the ability to use common computer programs such as Microsoft Teams and Outlook. Pay Range Compensation between USD $21.32/Hr.-USD $28.43/Hr.

Our story goes back more than 150 years, to the chilly southern coast of Scandinavia. From our early success in Sweden and Denmark, we've grown into the world's leading specialist producer of plant-based oils, employing more than 4,000 people all across the globe. We work with our customers to make the products you love even better. The oils we produce go into making your chocolate extra-creamy or putting the crunch into your croissant. And it's not just food - we work across industries to make products that are higher quality, healthier and better for the planet. Everything we do is about Making Better Happen. AAK Newark Newark, NJ About the role The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to assure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers' requirements and concerns is required in this position. Responsibilities Safety & Environmental Performance * Lead the safety effort by personal example. * Support full plant wide compliance with safety rules to further our goal of 0 accidents and encouragement of reporting and correcting near misses. * Support 0 contractor accidents during major construction or anytime maintenance contractors are on site. * Identify high-risk safety/ productivity issues and help remedy them. * Adhere to SOPs and other work procedures as required to assure product quality and consistency to our customers. * Ensure that all equipment is safely released to the technician following site Safe Work Permits and other Life Critical permits. * Perform job tasks in a manner compliant with GMPs. * Participate in company activities such as; Safety Committee, Audit committees, employee task forces, etc. Work Requirements * Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems. * Install, loop check, maintain and troubleshoot process control systems comprised of transmitters, controllers, and valves operating in a PLC system. * Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters * Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC. * Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements * Properly select, install and wire 120V-480V motors, single phase to three phase based on needs * Strong working knowledge of National Electrical Code (NFPA 70) * Evaluate current instrumentation technology for process equipment,and make recommendations for improvements. * Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure. * Provide on-call support during assigned weeks to ensure 24/7 coverage * Provide practical solutions to operations/ controls problems. * Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc. * Train other employees in light of their needs and company needs. * Oversee the work by contractors as required on site to assure safe and quality performance. * Look for opportunities to help work get done safer, faster and more cost effective. Cost Control * Contribute to the effort in controlling costs and minimizing wastage in pursuit of your daily work. * Support goal of minimum part sparing consistent with production goals and local vendor sport services. * Support goal of minimum part sparing consistent with production goals and local vendor sport services. About you High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment. * Ability to analyze and interpret technical problems related to instrumentation or PLC logic. * Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc) * Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force. * Ability to work with and apply mathematical concepts to practical situations. * Preferred: New Jersey Licensed Electrician (or working towards license) * Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician) In return AAK offer ●Career paths, training and development, e-learning and tuition reimbursement programs offering potential for you to progress your future career ●Comprehensive health insurance (medical, dental and vision) starting date of hire ●Health Savings Account with AAK annual contribution of $1,000-$1,500 ●401(k) Plan with 100% match ●Free Life and Disability insurance ●Employee Assistance Program ●Supplemental Pet Insurance, Identity Theft Protection and Legal Insurance Plans ●Discounts on travel, amusement parks, concerts, movies, and more ●Celebrations, events, and activities on site and supporting our communities About AAK Everything AAK does is about Making Better Happen. We specialize in plant-based oils that are the value-adding ingredients in many of the products people love to consume. We make these products better tasting, healthier, and more sustainable. At the heart of AAK's offer is Customer Co-Development, combining our desire to understand what better means for each customer, with the unique flexibility of our production assets, and a deep knowledge of many products and industries, including Chocolate & Confectionery, Bakery, Dairy, Plant-based Foods, Special Nutrition, Foodservice and Personal Care. Our 4,000 employees support our close collaboration with customers through 25 regional sales offices, 15 dedicated Customer Innovation Centers, and with the support of more than 20 production facilities. Listed on Nasdaq Stockholm and with our headquarters in Malmö, Sweden, AAK has been Making Better Happen for more than 150 years. AAK prohibits discrimination on the basis of race, color, sex, sexual orientation, age, national origin, physical or mental disability, religion, veteran status, and any other class of individuals protected from discrimination under state or federal law in any aspect of the access to, admission, or treatment of students in its programs and activities, or in employment and application for employment.

Driven by a commitment to research, quality, and service, PDI provides innovative products, educational resources, training, and support to prevent infection transmission and promote health and wellness. Encompassing three areas, our Healthcare, Sani Professional and Contract manufacturing divisions, we develop, manufacture, and distribute leading edge products for North America and the world. We have several locations across the US and are looking for new Associates to join our team! POSITION PURPOSE * This position is for 1st Shift (Mon-Fri 7:00am-3:30pm)* We are seeking a Senior Electromechanical Technician to support our manufacturing operations by reducing equipment downtime and ensuring reliable performance of automated and electrical control systems. This role focuses on electrical troubleshooting and automation support across PLCs, servo drives, robotics, sensors, and control systems. Some mechanical skills are also required but secondary. The ideal candidate has deep expertise in industrial electrical systems and automation, with the ability to quickly diagnose and resolve complex control issues while collaborating with production, maintenance, and engineering teams. ESSENTIAL FUNCTIONS AND BASIC DUTIES * Troubleshooting & Repair * Rapidly diagnose and repair downtime issues across PLCs, servo drives, robotics, sensors, motor controls, and control valves. * Calibrate, test, and replace sensors, encoders, and electrical feedback devices. * Resolve integration and safety interlock issues within robotic cells, conveyors, and automated lines. * Support limited mechanical troubleshooting only as needed to enable electrical/automation functionality. * Preventive & Predictive Maintenance * Execute preventive maintenance (PMs) focused on electrical and control systems for production equipment. * Support predictive maintenance initiatives (e.g., electrical testing, thermal imaging, insulation resistance checks). * Document electrical and automation repairs in the CMMS. * Collaboration & Continuous Improvement * Partner with engineers and operations on root cause analysis (RCA) for recurring electrical or control failures. * Recommend and implement upgrades to controls, automation systems, and electrical hardware/software. * Provide technical mentorship to junior technicians in electrical troubleshooting and automation practices. * Compliance & Safety * Follow and enforce OSHA/EHS standards during all maintenance activities. * Ensure all lockout/tagout (LOTO) and electrical safety procedures are followed. PERFORMANCE MEASUREMENTS * Equipment Reliability & Uptime * Preventive & Predictive Maintenance Execution * Troubleshooting & Technical Skills * Safety & Compliance * Contribution to Automation/Controls Improvements QUALIFICATIONS EDUCATION/CERTIFICATION: * Associate Degree in Electrical Technology or Equivalent Industry Experience REQUIRED KNOWLEDGE: * Hands-on expertise in PLC troubleshooting (Allen-Bradley, Siemens, or similar - programming experience a plus but not required). * Strong knowledge of servo drives, VFDs, robotics, and industrial controls. * Working knowledge of pneumatics, actuators, and mechanical power transmission systems. * Ability to read and interpret electrical schematics, mechanical drawings, and equipment manuals. EXPERIENCE REQUIRED: * At least 8 years in industrial maintenance preferred, with strong exposure to automation and electromechanical systems. * Individuals with fewer years of experience may be considered if they demonstrate significant expertise in automation and electromechanical systems. * Some mechanical aptitude required SKILLS/ABILITIES: * Strong troubleshooting and problem-solving mindset. * Excellent communication and teamwork skills. * Flexibility to support multiple shifts and respond to urgent downtime events. * Testing equipment (e.g., oscilloscopes, multimeters) * Familiarity with industrial protocols (e.g., Ethernet/IP, Modbus, Profibus). * Experience with robotics, motion control, automation, or machine vision systems. WORKING CONDITIONS * No hazardous work conditions. * Position in a manufacturing plant environment. * Production floor work is required for installation, testing, or troubleshooting equipment and control systems. SALARY RANGE * $70,000 - $90,000 annually, plus bonus and OT pay (as necessary) PDI is pleased to offer a comprehensive and affordable benefits program to our associates, which includes: * Medical & prescription drug coverage * Dental / Vision plan * 401(k) savings plan with company match * Basic and supplemental life insurance * Flexible Spending Accounts (FSAs) * Short- and long-term disability benefits * Health Advocacy Program / Employee Assistance Program (EAP) Many other voluntary benefit plans such as: Legal assistance, critical illness, hospital indemnity and accident coverage, discounted home/auto/rental insurance, employee discounts and pet insurance At PDI, we are also committed to helping our associates maintain a healthy and sustainable work/life balance and are proud to provide: Sick leave, generous vacation and holiday time, paid parental leave, summer hours, flex place/flex time options

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Veolia is seeking a Water Treatment Process and Industrial Instrumentation Technician (union position, on-call) to support the operation, maintenance, and optimization of water treatment plant and distribution system equipment. This role focuses on the installation, calibration, repair, and troubleshooting of industrial instrumentation and control systems from manufacturers such as Siemens, Hach, and Endress+Hauser, Allen Bradley as well as the operation and monitoring of water quality instrumentation, analyzers, and SCADA/PLC systems. The technician will work collaboratively with operations and maintenance teams to ensure compliance with water quality standards and maximize system efficiency. Primary Duties/Responsibilities: Install, calibrate, maintain, and repair industrial instrumentation and control equipment (flow meters, analyzers, transmitters, sensors, etc.) Troubleshoot and diagnose issues with instrumentation, PLCs, and SCADA systems, providing timely solutions to minimize downtime. Experienced with water treatment plant and distribution system equipment, including pumps, valves, and chemical feed systems. Collect and analyze water and sludge samples; perform chemical and analytical testing. Conduct preventive maintenance and routine inspections of equipment. Maintain accurate records of work performed, calibration data, and equipment inventory using CMMS and other methods. Interpret technical manuals, wiring diagrams, and schematics for installation and troubleshooting. Work with manufactures representatives to assist in troubleshooting and repair. Collaborate with engineering operations and maintenance teams for process optimization and system upgrades. Respond to alarms, emergencies, and participate in an on-call for after-hours support. Adhere to and promote Veolia's safety policies and practices. With proper electrical background, installs, maintains, services, tests, calibrates and repairs all instrumentation and measuring equipment, including telemetering and supervisory controls at all stations and other locations as assigned. Reads and works from schematics, wiring diagrams, electrical blueprints and drawings. Must keep abreast of rapidly changing technology by acquiring and maintaining the skills and knowledge needed through a company assisted training program. Keeps records of equipment maintained and repaired. Uses, adjusts, and repairs electronic testing equipment. Performs other similar or less skilled work as assigned. Assists employees of a higher classification as assigned. Qualifications Education/Experience/Background: High School Diploma/GED is required. Electrical experience required. Demonstrated experience with Siemens, Hach, Endress+Hauser, or similar industrial instrumentation. Experience in water treatment plant operations, distribution systems, or industrial instrumentation and automation. Knowledge/Skills/Abilities: Strong knowledge of PLC programming and SCADA system interfaces. Ability to read and interpret technical documents, schematics, and wiring diagrams. Computer literacy with Google Suite and Microsoft Office applications. Excellent troubleshooting, problem-solving, and record-keeping skills. Ability to interface with technical solutions resources from manufacturers and representatives. Ability to work independently and as part of a team. Required Certification/Licenses/Training: Trade school certification in industrial instrumentation, electronics, or a related field preferred. Valid driver's license is required. Physical Requirements: Ability to lift up to 40 lbs. Normal visual acuity, manual dexterity, and hearing ability. Ability to climb ladders, work in confined spaces, and detect odors. Additional Information Pay Rate: $41.36 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Join Weiss-Aug - A Leader in Precision Manufacturing and Innovation Be part of a company that's shaping the future of manufacturing where your ideas, skills, and passion matter. Weiss-Aug, is a leading provider of advanced manufacturing and engineering solutions with advanced facilities across the U.S. and Mexico for over 50 years. Why Join Us? At Weiss-Aug we are driven by a commitment to excellence, innovation, and continuous improvement. As a recognized leader in the industrial and commercial sectors, specializing in high-volume metal stamping, thermoplastic molding, and value-added assembly solutions for the medical, aerospace & defense, automotive, interconnect, telecommunications and consumer goods industries, we take pride in cultivating a collaborative and forward-thinking work environment. We're currently seeking a passionate and skilled Mechatronics Technician to join our team and contribute to our mission of delivering high-quality, engineered solutions to our customers worldwide. In this role you will be responsible for perform troubleshooting, repairs, maintenance, and continuous improvement of production equipment in the stamping, molding, and assembly departments. Apply root cause analysis to effectively pinpoint and address issues. Contribute to the assembly, camera setup, wiring, and general de-bugging efforts for newly developed machines or large-scale upgrades. Mechanical and electrical expertise is essential for completing these tasks successfully. Responsibilities General machine troubleshooting/Root-cause analysis Electrical troubleshooting & repair (Sensor issues, diagnosing and fixing issues in electrical cabinet, etc.) Mechanical alignments (Feeding systems, cylinders, mating components etc.) Vision troubleshooting & adjustments (Cognex etc.) Part installation and replacements (Spare parts etc.) Continuous improvement projects Reading, editing, and creating documentation Assisting in machine builds and major projects Requirements 2-year associate degree and/or trade apprenticeship strongly preferred. 5+ years in a medium to high-volume manufacturing environment. Hydraulics & pneumatics, Vision Systems (Cognex preferred), 2D and 3D CAD (Solidworks preferred), Servo Motors, Robots, Feeding systems, PLC, Part Machining (lathes etc.), Measurement Equipment (include lab measurement devices). This position is at our East Hanover, NJ location. Pay Rate: $27/hr. - $32/hr. Other Benefits Include Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life - Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance US Pay Transparency The base salary for this role will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. If your salary requirements exceed the advertised range and you remain interested in Weiss-Aug, we encourage you to apply. Weiss-Aug is an Equal Opportunity/Affirmative Action Employer. Applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, protected veteran status, disability, or any other characteristics protected by applicable federal, state, or local law.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: Build, operate, maintain, and troubleshoot complex mechanical and electrical systems Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality Responsible for tool and workspace organization and maintenance Assemble and troubleshoot test articles and supporting test equipment Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets: High-school diploma or equivalent 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems Comfortable working to aggressive deadlines and exceptional work ethic Proficiency with Microsoft Office suite tools or similar software Ideal Experience: Knowledge of quality control and inspection procedures Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers Experience with reflow solder processes, including PCBA manufacturing Crane or lifting experience Forklift experience Experience with electrical schematic and wiring Experience using various types of hand tools and precision measuring tools Experience in documenting, improving, and implementing process instructions Experience with reading and reviewing mechanical drawings Experience with machining, operating manual milling, saws, and other tools Company Benefits: Hourly rate $30-43/hr Comprehensive health benefits (e.g. medical/dental/vision) Employee equity stock options 20 days PTO It's not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world's hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran's status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Role Due to a full order book our client based near Stamford, currently has immediate long term roles for competent electrical individuals to join their team. Responsibilities: Panel wiring Electrical sub-assembly Work from electrical schematics, drawings & schedules Ensuring products are completed in line with delivery schedule Requirements for the role: Experience in a similar role Electrical background required - 18th Edition Qualification an advantage Ability to demonstrate attention to detail Able to follow clear and precise procedures/instructions Good communication and team skills Hours and pay: 38 hours per week Working Hours Monday to Thursday 7:30 to 4:30pm 30 mins lunch. Friday 7:30am to 11:30am Starting salary up to £13.71 Overtime @ 1.33 for the first 4 hrs @ 1.5 after. Quaterly bonus - up to £600 36 days holiday per annum

About the Company: Aerolase is the fastest growing medical laser company, serving the high growth dermatology and aesthetic laser market. Nestled in the picturesque Hudson Valley in Tarrytown, NY, the location is also ideal for access to NY City and other areas of the Northeast and Mid-Atlantic U.S. We are hiring in many areas and currently seek laser optical engineering technicians with a passion for creating new things. The company offers a friendly, team-oriented work environment and competitive compensation including salary, bonus, stock options, 401k, and health/dental/life insurance plans. About the Team: • We are a diverse team of friendly, creative hard-working people with a passion for achieving our objectives • We are creative, hands-on and innovative with a strong orientation toward high customer satisfaction • We have created a very team-spirited company culture and believe it is important to have open and effective cross-functional collaboration and communications - and enjoy our work! About the role: We're looking for an enthusiastic, creative and detail-oriented problem solver to help support the production, service and repair of our unique solid-state laser devices. Must have expertise working hands-on with assembly and/or development of small, sensitive, high precision instruments, preferably solid-state laser technology, with a high caliber technology company. We prefer design and hands-on experience in multiple laser technologies including solid state lasers, semiconductor lasers, non-linear optical materials and devices, optical benches, and beam directors. Experience with the technical aspects of developing laser and laser-based products is preferred. Candidates should have proven ability to address complex challenges with ingenuity and innovation, and capability to work independently to manage multiple simultaneous tasks, and see all tasks to completion. Also should have the ability to work well in a collaborative multidisciplinary team environment, define and analyze system performance specifications, and ensure adherence to those specifications in the application environment. Responsibilities: • Test, troubleshoot repair and assemble lasers, subassemblies and various components, including high-voltage laser power supplies and other electronics. • Support the development and implementation of test fixtures, equipment, procedures and documentation for the engineering and operations functions. • Support product design and development activities related to new products and product improvements. • Support development and maintenance of quality and regulatory documents and procedures. • Maintain thorough, complete and accurate written records; comply fully with the company's quality system and any regulatory requirements. • Follow safety rules for working with high-voltages and high-power lasers. • Perform other duties as completion of responsibilities necessitates or as assigned by supervisor. Skills and Experience: 1. Minimum 1-3 years of experience in a technical role involving high power pulsed power supplies. 2. Understanding of system, board and component design, testing and troubleshooting. 3. Theoretical and practical knowledge and skills of adequate policies and procedures for the control of laser hazards and high voltage hazards, using relevant protective equipment, ensuring adequate safety education and training of other personnel. 4. Enjoy working with your hands/mechanical ability. 5. Strong analytical and problem solving skills. 6. Proven technical and project management skills. 7. Experience with manufacturing within a Quality Management System (especially medical). 8. Strong interpersonal and communication skills. 9. Self-motivated, detail oriented and well organized. Ability to make decisions and work independently Strong work ethic and desire to help the company successful by producing a reliable product. 10. Not afraid to ask questions and make suggestions for improvement. 11. Be able to work under pressure due to customer demands. 12. Strong computer skills (Windows™ software). 13. Ability to successfully manage multiple projects and daily responsibilities. Ability to discern and appropriately communicate sensitive issues. 14. Ability to walk, stand, bend, reach, stoop/squat, and crouch. Ability to carry heavy items. Educational Requirements: 15. A.S. or higher in technical discipline, optical engineering preferred

JOB TITLE: Engineering Technician TYPE: Full time, regular COMPENSATION: $29.00/hr $36.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Engineering Technician will be working on medical device development and integration as part of a tight knit team. This role is multi-disciplinary with responsibility for assembling mechanical, electro-mechanical, and optical subassemblies and integrating them into the final flag-ship product. In addition, the candidate should be able to assemble, install and troubleshoot wiring components, having a strong understanding of electrical systems. The ideal candidate should have experience working in a fast-paced manufacturing environment. Responsibilities : Operate manufacturing equipment and machinery according to established procedures and safety guidelines Interpret standard work instructions, technical diagrams, schematics, and blueprints to build and troubleshoot multiple assemblies Perform precision assembly tasks using a variety of methods, including hardware such as screws, bolts, and fasteners, as well as adhesives, to ensure accurate and secure assembly of components Perform the installation, routing, and termination of electrical wiring systems according to design specifications and industry standards Utilize a variety of hand and power tools to cut, strip, crimp, and connect wires and cables Conduct quality control inspections at various stages of the production process to ensure product integrity and adherence to standards Troubleshoot equipment malfunctions and electrical systems to identify and resolve issues efficiently Work with computers and software to operate, monitor, and troubleshoot automated test equipment and diagnostic systems Perform routine maintenance tasks to keep machinery in optimal condition Collaborate with engineers, other team members and supervisors to identify, troubleshoot, and resolve issues related to product assembly and wiring configurations Adhere to all company policies and procedures, including those related to safety, quality, and regulatory compliance Qualifications : High school diploma or equivalent required; associate degree, technical certification or vocational training preferred 3+ years of manufacturing experience, medical device, electro-mechanical, or optical experience Ability to read, interpret and follow industry standards and internal work instructions, specifications, and engineering drawings Experience with computer systems and software applications used to control, run, and diagnose engineering test equipment. Familiarity with operating machinery and tools used in production processes Proficiency in reading and interpreting technical diagrams, schematics, and blueprints Strong knowledge of electrical wiring principles, techniques, and safety standards Strong attention to detail and commitment to producing high-quality work Excellent problem-solving and mechanical aptitude Effective communication skills and ability to work well in a team environment Flexibility to work in fast-paced environment and adapt to changing project requirements Familiarity with ISO 13485 standards, a plus Company Offers: Competitive salary, commensurate with experience and education Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays) A collaborative and diverse work environment where our teams thrive on solving complex challenges Ability to file IP with the company Connections with world class researchers and their laboratories Collaboration with strategic leaders in healthcare and pharmaceutical world A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Salary: $ 70,000.00 We have partnered with a manufacturing company in Mahwah, NJ to provide them with a Engineering Technician. Please review the below description and let us know if you are interested. Prioritized Must Have Skills for the Engineering Technician: #1. Technical School Degree or Associates required, Bachelors degree in Engineering a plus #2. Ability to use basic power tools #3. Ability to do basic prototyping #4. Prior experience with building and disassembling small products #5. CAD not required, but prior experience is a plus Responsibilities of the Engineering Technician: The Engineering Technician will aid the Product Development team by working with physical products in the testing lab. Daily tasks include disassembling products and running test procedures and assisting the engineering team with fabrication. The ideal candidate is organized with multiple projects, thorough in detail-oriented tasks, and possesses a friendly personality. Role & Responsibilities Work with Engineering team to help with fabrication and test setups. Disassembling competitors products for technical evaluation Work with Systems programmers to develop new product systems parameters and evaluation of system functionalities. Evaluating client products with test procedures after disassembly Requirements of the Engineering Technician: Determining and performing tests needed for the analysis and report Recording tests and analyses and then reporting the results Discussing and answering any questions regarding the results Organizing and storing samples Cleaning and maintaining lab equipment, including recalibration of equipment Staying current on technical and scientific advances in their field Technical School Degree or Associates required, Bachelors degree in Engineering a plus Ability to use basic power tools Ability to do basic prototyping Prior experience with building and disassembling small products CAD not required, but prior experience is a plus Microsoft Office proficient Other Key Requirements for the Engineering Technician: Onsite role. No sponsorships or visa holders. No Corp-to-Corp. Benefits of the Engineering Technician: Medical Insurance Dental Insurance Life Insurance Disability Insurance 401(k) plan About the Company: Cyfle is a global business dedicated to connecting talents worldwide. Our comprehensive RPO services, placement services, and training services help businesses unlock their full potential.

The Company: GIA is the world's foremost authority in gemology. GIA is a global organization with headquarters located in Carlsbad, CA. GIA in Carlsbad boasts a 17-acre ocean view campus that accommodates approximately 600 of its 3,000 total employees worldwide. It offers many competitive health and commuter benefits that promote the well-being of its employees as well as that of the environment. Click here to learn more about GIA! The Location: Secaucus New Jersey - a hub of gemological excellence and innovation. Located just minutes from New York City, our New Jersey campus offers a dynamic work environment where passion for gems and jewelry meets cutting-edge technology and research. The Environment: On-site cafe - affordable custom breakfast and lunch meals and Starbucks drinks! Economic friendly services - electric vehicle charging stations on-site Ergonomic assessments offered on-site and virtually The Culture: We foster an environment of autonomy, performance, and passion. Our team members collaborate extensively across various departments, providing high-quality service to internal staff, stakeholders, and the organization. We value initiative, cross-functional cooperation, and a commitment to excellence in all our endeavors. What to expect: We offer competitive medical, dental, vision and matching 401-K plans (no vesting required) Paid vacation, sick and holidays, tuition assistance, commuter benefits Job Overview: The Engineering Technician will work with the Instrument Development Team in Secaucus, NJ to assemble various functional instruments to meet the organization's daily operational needs with R&D activities. The Engineering Technician will be responsible for instrument assembly by performing the following duties. Essential Duties & Responsibilities: Assemble hardware with allen keys, wrenches and optical tools Strip, Crimp, Solder and Harness wires Understand 3d assembly prints and electrical schematics Assemble prototypes and instruments, perform validation testing Help scientists with data collection and analysis documenting testing processes Documents assemble steps and markup assembly drawings with notes and modifications for engineering review Assemble components with limited oversite Bring assembly issues and potential solutions for the attention of the Manager for review Provide updated estimates for assembly completion dates Monitor and order inventory Operate equipment including but not limited to drills, saws, cutting and other manufacturing and fabrication tools. Communicates effectively, gets along with coworkers and management, and deals with others effectively and professionally under pressure. Travels globally using commercial transportation resources for installations of future equipment. Job Competencies: Language skills: ability to read, comprehend and follow standard procedures or instruction in local language (proficiency in reading, writing and speaking in English required) Communication skills: communicate professionally (communicate respectfully, listen, articulate/explain issues, use professional tone, know when to email vs call, etc.) Interpersonal skills: create positive interactions with colleagues; actively communicates with others in a timely & professional manner; maintains good working relationships with others and peers with a team-oriented mindset. Ability to share knowledge with others to enhance collaboration Problem Solving: identifies basic problems and fixes or escalates as required; uses fact finding to determine the best approach to solve problems; applies basic analytical thinking to clarify issues and propose solutions with sound judgement and decision-making abilities Computer skills: Basic knowledge of MS Office (Excel, Word, PowerPoint) Detail-oriented/Ability to focus and complete tasks assigned in a timely manner Ability to multi-task, prioritize, and manage time effectively Ability to learn, understand and follow Standard Operating Procedures Ability to learn and use basic office equipment. Maintains & fosters sensitivity and respect for cultural diversity Comfortable with 3D software (Edrawings or Solidworks) for viewing 3D designs Skilled with MS Word and Excel Work with engineers in a fast-paced and demanding work environment Must be able to perform all tasks in a safe manner under minimal supervision Strong communication and documentation skills, self-motivated with good verbal and written communication skills in English Minimum Qualifications: High School Diploma, or equivalent, and 2+ year(s) related experience, associate's degree preferred. Robotics experience a plus Additional Requirements: 2+ years' hands-on experience assembling and testing lab grade hardware (mechanical/electrical) This role may require occasional travel globally using commercial transportation resources for installations of future equipment. Work Environment/Physical Demands: Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is occasionally exposed to outside-weather conditions. The noise level in the work environment is usually moderate. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Pay Range: $24.50-$31.50 an hour An Equal Opportunity Employer All employment decisions are made without regard to unlawful considerations of race, sex, religion, national origin, age, disability, or any other legally protected status. Reasonable accommodations are available upon request. Disclaimer: This indicates in general terms, the type and level of work performed as well as the typical responsibilities of employees in this classification and it may be changed by management at any time. Other duties may also apply. Nothing in this job description changes the at-will employment relationship existing between the Company and its employees.

Join our dynamic team to navigate complex risk landscapes and fortify technology governance, making a pivotal impact in our firm's robust risk strategy. As a Tech Risk and Controls - Tech Issue Management Oversight & Execution within the Technology Risk & Services team, you will contribute to the successful management of technology-aligned aspects of Governance, Risk, and Compliance in line with the firm's standards. Leverage your broad knowledge in risk management principles and practices to assess and monitor risks and implement effective controls. Your role in risk identification, control evaluation, and security governance is crucial in advising on complex situations and enhancing the firm's risk posture. Through collaboration and analytical skills, you will contribute to the overall success of the Technology Risk & Services team and ensure compliance with regulatory obligations and industry standards. Job responsibilities Assess and monitor technology risks, ensuring compliance with firm standards, regulatory requirements, and industry best practices Support implementation of effective controls in collaboration with cross-functional teams and stakeholders Evaluate the effectiveness of existing controls, identify gaps, and recommend improvements to mitigate risks and enhance the firm's risk posture Analyze complex situations, provide advice on risk management strategies, and support the implementation of risk mitigation measures Required qualifications, capabilities, and skills 3+ years of experience or equivalent expertise in technology risk management, information security, or a related field, with a focus on risk identification, assessment, and mitigation Experience in risk identification, assessment, and control evaluation, with a strong understanding of industry standards Demonstrated ability to analyze complex issues, develop and implement risk mitigation strategies, and communicate effectively with senior stakeholders Proficient knowledge of risk management frameworks, regulations, and industry best practices Preferred qualifications, capabilities, and skills CISM, CRISC, CISSP, or other industry-recognized risk certifications