Design engineer jobs in Eufaula, AL

KBH Industrial | Dothan, Alabama | Full Time About Us KBH Solutions (also known as KBH Industrial) is your most reliable source for project management, project controls and project oversight with associated support services. KBH can and will support all phases of your project. Job Summary We are seeking a Site Mechanical Engineer to support mechanical systems and components at a nuclear power generation facility. This role will provide engineering oversight, troubleshooting, and technical guidance to ensure safe, reliable, and efficient operation of plant systems. The ideal candidate will have strong analytical skills, experience in mechanical system performance, and the ability to work across multiple disciplines in a regulated nuclear environment. Key Responsibilities Provide engineering support for mechanical systems, components, and equipment to ensure safe and reliable operation. Perform system health monitoring, trending, and analysis to maintain and improve equipment reliability. Support outage and on-line work activities, including troubleshooting emergent equipment issues and evaluating proposed modifications. Review and approve engineering design changes, calculations, and technical specifications for compliance with industry codes and standards. Develop and revise procedures, work packages, and technical documents to ensure regulatory and safety requirements are met. Collaborate with Maintenance, Operations, and Work Management to resolve technical challenges and improve system performance. Participate in root cause evaluations, corrective action development, and risk assessments. Ensure compliance with applicable codes, standards, and regulations (ASME, ANSI, NRC requirements, etc.). Required Education and Experience Candidates must meet the following qualifications: Bachelors degree in Mechanical Engineering from an ABET-accredited program (required). 3+ years of engineering experience (power generation, nuclear, or other highly regulated industry preferred). Required Abilities and Skills Candidates must demonstrate the following: Strong technical problem-solving and troubleshooting skills. Excellent written and verbal communication abilities. Ability to manage multiple priorities and work effectively in both outage and on-line plant conditions. Proficiency with engineering analysis tools and standard office software. Knowledge of industry codes, mechanical design principles, and equipment reliability practices.

The JUNIOR DESIGN ENGINEER works under the general supervision of a Professional Engineer and Lead Design Engineer. The Junior Design Engineer will perform inspections and prepare simple designs and technical details. This position is the entry level position for professional engineers. Performs routine computer-aided design and drafting tasks for land development and infrastructure projects. Prepares preliminary conceptual layouts, computation of quantities and designs for simple engineering projects. Prepares engineering design computations and analysis as necessary to design, and prepare engineering plans, reports and studies. Assists in the preparation of contract documents, specifications and plans for bidding. Inspects minor construction and maintenance work for compliance with plans and specifications. Site visits to make field measurements and observe project site in preparation for concept and design phase. Computes and checks estimates based on observations for determining payments to contractors and prepares progress reports. Requirements EDUCATION AND/OR WORK EXPERIENCE REQUIREMENTS: Bachelor's Degree from an accredited college or university with major course work in civil engineering. EIT preferred Strong verbal and written communication skills; ability to communicate in English with internal and external clients. Regularly spend long hours sitting and using office equipment and computers. Able to read and interpret plans and specifications. Able to make engineering design computations and check, design, and prepare engineering plans and studies. Able to perform mathematical computations as applied to engineering problems. Knowledge of the methods and equipment used in construction. Ability to perform designing and drafting assignments. Ability to interpret specification and contract essentials. Working knowledge of CAD and Microsoft Office. Previous experience with Autodesk Civil 3D or Microstation OpenRoads preferred Valid Driver's License- Must be insurable by fleet insurer; driving history will be reviewed by agent and underwriter The ability to work a regular schedule of 7:30 AM - 5:30 PM Monday through Thursday and 7:30 AM - 12:00 PM Friday Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service. Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. PHYSICAL REQUIREMENTS: Ability to safely and successfully perform the essential job functions consistent with OSHA guidelines and directives, in conjunction with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. Regularly work on repetitive tasks. Regularly use hands and fingers to handle, control, or feel objects. Regularly hold the arm and hand in one position or hold the hand steady while moving the arm. Regularly use headphones and earpiece. Regularly see details of objects that are less than a few feet away. Regularly speak clearly so listeners can understand.

Job Title: Project EngineerJob Description We are seeking a Project Engineer with a strong design and engineering background to join our team. The role involves project engineering within a design setting, focusing on the design of equipment, including steel, process, power, concrete, and foundation designs. The position also involves managing EGSE design work. A Professional Engineer (PE) license is not required for this role. Responsibilities * Perform mechanical design tasks, including sketches and mark-ups of existing drawings to communicate design intent. * Conduct field work to inspect and verify existing plant conditions, route pipes, ducts, and roads, and layout new equipment for optimal space and resource use. * Create preliminary designs for the installation of pipes, equipment, and structures. * Coordinate with other disciplines to produce projects with the lowest total installed cost. * Review and check the design work of others for accuracy and compliance with project requirements. * Critically evaluate design work across various disciplines. * Establish and maintain positive relationships with clients and contractors. * Lead scope development efforts by interfacing with clients as needed. * Provide weekly reporting communications to clients and communicate scope requirements to designers or other engineers. * Obtain quotes for engineering, equipment, material, and services. * Coordinate project safety, timing, and other issues. * Control documents generated during the course of the project and manage electronic document storage per EGS file system. * Issue documents to clients for permanent storage and maintain internal schedule and budget. * Pursue internal deliverables and ensure timely issuance of drawings, reports, etc. * Develop bid packages, lead bid meetings, and evaluate bids. * Manage the scope of work and write proposals, change orders, scope, and estimate reports. Essential Skills * Project management and engineering skills with a focus on design. * Experience in mechanical design, project engineering, and mechanical engineering. * Proficiency in routing pipes, ducts, and roads, as well as handling equipment and structures. * Strong ability to critically review design work and ensure compliance with project requirements. Additional Skills & Qualifications * Experience with project management tools and electronic document storage systems. * Strong communication and relationship-building skills with clients and contractors. Work Environment This position is primarily office-based, with potential office locations in Bruton, AL, Jacksonville, FL, and Dothan, AL, with Dothan being the largest office. The company is an established small business with a focus on strategic long-term hiring. The work culture supports strong employee retention and significant growth. Benefits include BC/BS Medical/Dental coverage, vacation time, 7 paid holidays, life and AD&D insurance, and a 401K plan. Job Type & Location This is a Permanent position based out of Dothan, AL. Pay and Benefits The pay range for this position is $80000.00 - $150000.00/yr. 401k 4% matching Blue Cross Blue Shield dental plan Blue Cross Blue Shield vision plan Blue Cross Blue Shield medical Plan Relocation is available Workplace Type This is a fully onsite position in Dothan,AL. Application Deadline This position is anticipated to close on Dec 26, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Allient Inc. is in growth mode and currently seeking a Senior Programmer / Manufacturing Engineer to join our team in Dothan, Alabama! The Senior Programmer/Manufacturing Engineer position serves as the Subject Matter Expert/trainer/mentor/leader in support of the programming, operation and maintenance of all equipment within the Machine Center of Excellence. Apply now! Responsibilities: * Develop, optimize, and maintain CNC programs for multi-axis milling, turning, and mill-turn machines using CAD/CAM software (e.g., Mastercam, Siemens NX, or Fusion 360). * Interpret complex engineering drawings, blueprints, and technical specifications to ensure accurate machining processes. * Collaborate with engineering, production, and quality teams to improve manufacturability and reduce cycle times. * Select appropriate cutting tools, speeds, and feeds to maximize efficiency and tool life. * Conduct first article inspections and troubleshoot machining issues to ensure part conformance and quality standards. * Lead continuous improvement initiatives in CNC programming, setup, and machining processes. * Train and mentor junior programmers, engineers, operators, and machinists on best practices and new technologies. * Lead workshops and one-on-one sessions on: * CNC programming techniques * Workholding and tooling strategies * SMED (Single-Minute Exchange of Dies) * Lean manufacturing principles * Setup reduction and process standardization * Maintain and update CNC program libraries and documentation in accordance with company standards. * Support new product introductions (NPI) by developing prototype programs and refining processes. * Ensure compliance with safety, quality, and regulatory requirements in all machining operations. * Prepare geometric layout using computer-assisted drafting software to show location of reference points and direction of cutting paths * Determine reference points and direction of machine cutting paths * Analyze drawings, sketches, and design data of parts to determine dimension and configuration of cuts, selection of cutting tools, and machine speeds and feed rates * Prepare the CNC machine for production adjusts machine settings to the desired product specifications. * Complete quality control tests during the manufacturing stage and on the final product. * Design and implement efficient workholding and tooling solutions for multi-axis machining. * Collaborate with design and quality teams to ensure manufacturability and compliance with aerospace standards (AS9100, NADCAP, etc.). * Champion Lean initiatives across the shop floor, focusing on waste reduction, cycle time improvement, and setup efficiency. * Lead Kaizen events and support implementation of 5S, visual management, and standard work. * Analyze machining processes to identify opportunities for cost savings and quality improvements. Minimum Qualifications: * Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering (or equivalent experience). * 8+ years of CNC programming experience with at least 3 years in aerospace or precision manufacturing. * Deep knowledge of G-code, multi-axis machining (3-,4-, and 5-axis), blueprint reading, tight-tolerance aerospace components, and high-performance tooling. * Proven track record of coaching and mentoring technical teams. * Strong understanding of Lean, SMED, and continuous improvement methodologies. * Excellent communication, leadership, and problem-solving skills and ability to lead root cause analysis and corrective actions. * Familiarity with ERP/MES systems and digital manufacturing tools. * Certifications in Lean Six Sigma or similar methodologies. * Experience with aerospace quality standards (e.g., AS9100, NADCAP) * Proficiency in CAD/CAM software such as Mastercam, Siemens NX, CATIA, or Fusion 360. * Demonstrated experience with low-volume, high-mix production. * Familiarity with aerospace materials and machining best practices for titanium, Inconel, and aluminum alloys. * To learn more about Allient, visit our website at *************** * Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Maintenance Technicians may oversee multiple grounds or spend their time dedicated to a single facility. They work flexible hours responding to emergencies as necessary and completing scheduled maintenance when convenient for the building owner. A Maintenance Technician is responsible for keeping a facility operating and repairing any problems when they are discovered before they have a chance to worsen. A Maintenance Technician will be required to perform a wide range of repair tasks around a facility. Some other tasks a Maintenance Technician may be called upon to do include: Keeping a schedule of routine repairs, inspection sheets and supply needs. Perform preventive maintenance on equipment to prevent equipment from going down i.e. inspect wiring (prevent shortages etc.), repair pipes, troubleshoot equipment, replace light bulbs, and install new equipment. They document temperature information on boilers and other temperature control systems to ensure safety and identify discrepancies that could indicate a machinery problem. Shop for materials and track receipts for reimbursement to make timely repairs. Maintenance Technicians Performing routine facility maintenance around the building addressing/fixing structural damage or disrepair to windows, doors, walls, painting, sealant application, etc. Repairing broken or leaking plumbing to avoid water damage and restore full use of water fixtures Maintaining the building HVAC equipment in order to keep climate control in the facility functioning properly Applying preventative measures to the building to reduce the risk of future problems, such as using a sealant on a flat roof Fixing potential safety hazards and security risks to avoid injuries as per Health and OSHA regulations and guidelines. Monitor and alert supervisory staff of suspicious or potentially destructive or disruptive behavior: things that may negatively affect the welfare of the company and its employees, vendors, and customers. At the end of the day, we are all here to improve the environment and lives of our team members, customers, vendors, and ourselves.

Our award-winning client is seeking a Senior R&D Electrical Engineer to join their team. The Senior R&D Electrical Engineer is responsible for leading the design and development of innovative, complex electronic systems for new products. This role requires a deep understanding of electrical engineering principles, experience with advanced technologies, and a proven track record of delivering successful products to market. The engineer will collaborate with cross-functional teams to ensure that products meet performance, cost, and quality targets while adhering to project timelines. Responsibilities: Independently conceive, design, and develop innovative electronic systems for new products. Provide technical guidance and mentorship to junior engineers. Manage complex projects from concept through production, ensuring adherence to timelines, budgets, and quality standards. Conduct feasibility studies, prototype development, and rigorous testing to validate product designs. Create comprehensive technical documentation, including schematics, specifications, and test reports. Diagnose and resolve electrical engineering issues during development and production. Work closely with cross-functional teams (e.g., software, mechanical engineering, manufacturing) to ensure successful product development. Identify opportunities to improve product design, manufacturing processes, and engineering practices. Required Qualifications: Bachelor's degree in Electrical Engineering or a related field. Minimum of 5 years of experience in R&D electrical design engineering, preferably in consumer product design. Strong expertise in digital signal processing, embedded systems, and analog circuit design. Proficiency in programming languages such as C/C++, Verilog, or VHDL. Experience with phased array and beamforming algorithms, acoustic or sonar instrumentation, and translating functional requirements into system specifications. Demonstrated ability to lead complex projects and manage cross-functional teams. Excellent problem-solving, analytical, and technical skills. Strong communication and interpersonal skills. Familiarity with industry-standard design tools and methodologies. Specific technical skills: Fixed point arithmetic programming. Phased Array and Beamforming Algorithms. Acoustic or sonar instrumentation and applications. Digital Signal Processing concepts and algorithms. Verilog or VHDL programming for Signal Processing algorithms in FPGAs. C/C++ programming. MATLAB programming. Embedded systems design and debugging. Analog sensor instrumentation. Schematic reading and drawing. Product development process, financial modeling, and timeline management. Manufacturing processes and tooling. Design analysis, simulation, and testing tools.

Why this is a great opportunity | In this role you will : Independently, perform innovative, complex electronic design and development for new products from conception through production release and design improvements for existing products. Be responsible for the successful completion of the design, testing, specification, documentation, and qualification of products throughout the project lifecycle. Establish and meet targeted project, timeline, cost, and quality objectives. Job Description | The key responsibilities for this role: Independently, create innovative new product designs in response to new product concepts through development and initial production efficiently and effectively based on thorough knowledge of company strategy and needs and advanced design skills. Construct and maintain new product timelines, which include required external resources. Additionally design and develop improvements to existing products. Recommend MFG and design fabrication/construction that are applicable to best practice. Troubleshoots design obstructions and provides cost-effective solutions. Perform prototype design experimentation, rapid prototype, and conventional prototype fabrication. Evaluate prototype design(s) for performance and reliability. Write product specifications and provide print documentation and testing verification methods to source and inspect the product. Ensures the product meets specifications and publishes testing results. Conduct and document technical feasibility evaluations, qualifications field and competitive testing to verify the design-Formulates development, unit, and tooling cost estimates. Perform advanced troubleshooting of electrical/electronic design issues during development after the production start. Collaborates with various internal teams to resolve issues and ensure the development of a quality product that support company and consumer needs. Produce project documentation that includes prints, engineering files, supplier communications and Engineering Change Orders (ECO's). Assist operations and outside suppliers through new product development stages of new products with tooling, process methods, assembly plans and forecasting capacity requirements. Manage a variety of moderately complex to complex projects from concept, design, and through completion. Develops timelines and ensure project success by maintaining timeline targets, budget responsibilities and quality requirements. Perform other duties as assigned. Required Qualifications: Education: Bachelor's degree in electrical engineering (BSEE), electronics engineering (BSET) or equivalent. Experience: Typically requires a minimum of 5 years experience in R&D electrical design engineering within consumer product design. This should include the following experience: Fixed point arithmetic programming, Phased Array and Beamforming Algorithms, acoustic or sonar instrumentation and applications, and translating functional requirements into system design specifications. Experience of having developed a commercialized Phased Array Multibeam Sonar Solid understanding and hands-on-experience on Digital Signal Processing concepts and algorithms. Verilog or VHDL programming experience of Signal Processing algorithms in FPGAs. Solid programming skills in C/C++ language. Proficiency in Matlab programming. Hands on experience designing, programming, and debugging Embedded systems interfacing with analog sensor instrumentation. Advanced knowledge of and skills in the design, evaluation and testing of electronic and/or electrical circuits and components. Knowledge of and experience in reading and drawing schematics. Advanced understanding of and experience in product development from concept through production which includes a core understanding of the new product process, financial modeling (EVA) and timeline management. Proven experience in generating, designing, and executing concepts into manufacturable designs. Demonstrated knowledge of and experience in managing more complex projects from concept to completion. Demonstrated creativity with strong analytical and technical expertise. Excellent communication skills to effectively collaborate with a variety of internal teams as well as external contacts. Advanced proficiency with specific computer-based analysis, simulation, and design tools.

Location: Atlanta, GA; Columbus, GA; Richmond, VA; Indianapolis, IN; Mason, OH (preferred). This role requires associates to be in-office 1 - 2 days per week, fostering collaboration and connectivity, while providing flexibility to support productivity and work-life balance. This approach combines structured office engagement with the autonomy of virtual work, promoting a dynamic and adaptable workplace. Alternate locations may be considered if candidates reside within a commuting distance from an office. Please note that per our policy on hybrid/virtual work, candidates not within a reasonable commuting distance from the posting location(s) will not be considered for employment, unless an accommodation is granted as required by law. PLEASE NOTE: This position is not eligible for current or future visa sponsorship. At Elevance Health, we are transforming how cloud technology supports healthcare delivery and innovation. We are seeking a Principal Engineer to lead enterprise-wide initiatives that optimize cloud investments across AWS and Azure. This role blends deep engineering expertise, analytics, and financial acumen, enabling Elevance Health to scale cloud adoption efficiently, sustainably, and strategically. How you will make an impact: * Provide deep technical leadership in AWS and Azure architectures, services, and cost models, ensuring scalable and cost-efficient solutions * Recommends new technology solutions and products are delivered to stakeholders and align with enterprise strategic objectives. * Partner with senior leadership and business stakeholders to shape cloud financial strategy, driving transparency, accountability, and value realization. * Define, implement, and enforce enterprise-wide standards and policies for cloud financial operations, compliance, and cost control. * Leading and defining the overall application system technology and architecture, development. * Build and refine financial models for cloud economics, including forecasting, chargeback/showback frameworks, and profitability analysis. * Develop, automate, and maintain real-time dashboards, data platforms, and reporting solutions that deliver actionable insights on cloud usage, spend, and optimization opportunities. * Design and implement scalable automation and data pipelines for cost governance, integrating with enterprise financial and operational systems. * Is responsible for and champions architectural standards, guidelines, principles, frameworks, and reference models. Minimum Requirements: * Requires a BA/BS degree in Information Technology, Computer Science, or related field of study and a minimum of 11 years experience; multi-dimensional platform experience, expert level experience with business and technical applications; or any combination of education and experience, which would provide an equivalent background. Preferred Skills, Capabilities, & Experiences: * 10+ years in cloud engineering, FinOps, analytics, or data engineering roles, with deep experience in AWS and Azure. * Proven track record building financial governance automation and data pipelines at enterprise scale. * Strong background in cloud economics, financial modeling, and cost optimization. * Expertise with analytics platforms, data visualization tools, and automated reporting frameworks. * Demonstrated experience developing and enforcing enterprise governance policies. * Exceptional communication and leadership skills with the ability to influence senior executives. * FinOps Certified Practitioner or advanced FinOps certification. * Experience in healthcare, insurance, or other highly regulated industries. * Knowledge of emerging trends in cloud cost optimization, AI-driven forecasting, and financial governance tooling. Please be advised that Elevance Health only accepts resumes for compensation from agencies that have a signed agreement with Elevance Health. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Elevance Health. Who We Are Elevance Health is a health company dedicated to improving lives and communities - and making healthcare simpler. We are a Fortune 25 company with a longstanding history in the healthcare industry, looking for leaders at all levels of the organization who are passionate about making an impact on our members and the communities we serve. How We Work At Elevance Health, we are creating a culture that is designed to advance our strategy but will also lead to personal and professional growth for our associates. Our values and behaviors are the root of our culture. They are how we achieve our strategy, power our business outcomes and drive our shared success - for our consumers, our associates, our communities and our business. We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, and incentive bonus programs (unless covered by a collective bargaining agreement), medical, dental, vision, short and long term disability benefits, 401(k) +match, stock purchase plan, life insurance, wellness programs and financial education resources, to name a few. Elevance Health operates in a Hybrid Workforce Strategy. Unless specified as primarily virtual by the hiring manager, associates are required to work at an Elevance Health location at least once per week, and potentially several times per week. Specific requirements and expectations for time onsite will be discussed as part of the hiring process. The health of our associates and communities is a top priority for Elevance Health. We require all new candidates in certain patient/member-facing roles to become vaccinated against COVID-19 and Influenza. If you are not vaccinated, your offer will be rescinded unless you provide an acceptable explanation. Elevance Health will also follow all relevant federal, state and local laws. Elevance Health is an Equal Employment Opportunity employer and all qualified applicants will receive consideration for employment without regard to age, citizenship status, color, creed, disability, ethnicity, genetic information, gender (including gender identity and gender expression), marital status, national origin, race, religion, sex, sexual orientation, veteran status or any other status or condition protected by applicable federal, state, or local laws. Applicants who require accommodation to participate in the job application process may contact ******************************************** for assistance. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state, and local laws, including, but not limited to, the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tightknit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? * 2 open positions What You Will Do: Columbus Forge, a recognized leader in producing disks for the aerospace propulsion market, is looking for a Manufacturing Engineer to support the Heat Treat organization and will learn about heat treatment and how it relates to resulting material properties. The Manufacturing Engineer is responsible for all aspects of part maturation from raw material to end use. * Develop and implement plans that are in line with the business strategy to further our world class technology portfolio. * Provide operational engineering support to develop technologies and processes which support the growth curve and cost reduction targets. * Leverage manufacturing innovations to improve cost, delivery, and quality of aerospace disk forgings; assist with problem solving during manufacturing related investigations. * Own relentless RCCA (Root Cause Corrective Action) for correcting non-conformance in the part families; perform DIVEs (Define, Investigate, Verify, Ensure); implement and monitor corrective actions; monitor and report on the health of a part family; monitoring the non-conformances and how the part 'runs' compared to 'standard' times. * Lead the CORE (Customer Oriented Results and Excellence) journey to continuously improve the quality and exceed customer's expectations; develop disk process using statistical methods that meet or exceed the business objective for process control. Qualifications You Must Have: * Bachelor's Degree in a STEM field and 2 or more years' experience in an engineering, manufacturing, quality or relatable industrial environment or a Master's degree and minimum 1 year of experience in an engineering, manufacturing, quality or relatable industrial environment. * Proficiency in Microsoft Office products including: Word, Excel, PowerPoint and Outlook. * Proficiency utilizing CAD software for 3D modeling and drawing creation. * U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract Qualifications We Prefer: * Degree in Aerospace Engineering or Mechanical Engineering * Knowledge and understanding of continuous improvement tools such as Six Sigma and LEAN Learn More & Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job Description Project Engineer Employment Type: Full Time, Salaried Exempt Experience Level: Entry to Mid-Level, zero to three years A growing Atlanta based construction firm is seeking a motivated Project Engineer who wants to build a long-term career in commercial construction. This role is ideal for someone who wants hands on learning, exposure to both field and office operations, and a clear path toward becoming an Assistant Project Manager and eventually a Project Manager. Project Engineer is the operational support hub for the project team. You will manage documentation, coordinate with the design team, support procurement, assist with financial tasks, and maintain regular job site engagement. This is a learning centered role with direct mentorship from experienced Project Managers and Superintendents. Key Responsibilities Document Control and Information Management • Manage submittals, review shop drawings for compliance, and coordinate approvals with the design team • Draft and process RFIs and track responses to support field operations • Prepare agendas and detailed meeting minutes for OAC and internal meetings Project Management and Procurement Support • Assist with subcontractor buyout, scope review, material procurement • Track lead times and delivery schedules to maintain project flow • Support monthly pay applications, invoice coding, change order pricing, and other financial tasks • Lead the project closeout process by collecting warranties, manuals, and as built documents Field Support and Quality Control • Walk the job site regularly with the Superintendent to understand sequencing and verify progress • Document safety observations and support quality control checks • Manage the punch list process and coordinate subcontractors to complete final items • Maintain organized photo documentation using Procore or similar software Qualifications • Bachelor's degree in Construction Management, Civil Engineering, Architecture, or related field • Zero to three years of commercial construction experience such as internships, co-ops, or entry level roles • Proficiency with Microsoft Excel, Microsoft Project, and Bluebeam Revu • Familiarity with Procore or similar construction management software is a plus • Strong written communication skills and attention to detail • Eagerness to learn, willingness to ask questions, and a proactive mindset Work Environment and Physical Requirements • Hybrid work setting that includes office work and active job site presence • Ability to walk job sites, climb temporary stairs, and wear PPE • Ability to occasionally lift up to twenty pounds Compensation and Benefits Competitive salary, performance bonuses, medical, dental, vision, 401K, and a clear professional growth pathway. You will receive hands on mentorship and opportunities to advance quickly within the organization.

Project Engineer, Georgia - 2500029P Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. About the Job: The Project Engineer will ensure safety, inspect plant systems, and support operations across multiple sites across Georgia, including Atlanta, Macon, Columbus, and others. Responsibilities include project management from design to implementation, structural design, plant troubleshooting, technical support for the SHE department, and anything else related to the mining operation. Movement between quarries will be necessary on an almost daily basis. There will also be opportunities to interface with work in other areas of the Division. What You'll Do: Manage Design. Uses AutoCAD to perform design tasks and produce drawings. Draws on internal/external mechanical and civil designer resources as required, who produce the majority of drawings. Inspect. Provides field supervision/inspection services on construction projects. Performs post-project review to ensure key objectives, cost/performance improvements, and rate of return are achieved. Prepare Bid Packages. Prepares bid packages for construction and manages construction contracts. Provide Updates. Provide project updates on a regular basis to various stakeholders about strategy, adjustments, and progress. Represent the Company. Represents the company to industry associations, government officials, and public agencies. Additional Responsibilities. Other duties as assigned. Travel. Varies based on projects, up to 25%. Most travel will be in central Georgia. Qualifications Skills You'll Need:Education. BS degree in Civil or Mechanical Engineering. Mining Engineering degrees considered with substantial civil/mechanical/project experience. License. Being on the path to PE licensure is preferred. Experience. 1-5 years of project management and related experience with experience in a heavy industrial or mining environment. Strong familiarity with project management and engineering software tools, methodologies, and best practices. Recent graduates considered with substantial co-op or other work experience. Basic understanding of preparing a project scope, budget, and timeline. Must have competent knowledge of concrete and steel design, building codes, and construction practices. Fundamental project management skills are desired. Other essential skills include some competency with AutoCAD and being fully functional with the Microsoft Office suite. Leadership Skills. Acts decisively and supports all aspects of the company to work together to accomplish the objectives, vision, mission, and values of Vulcan. Trusts and allows people to do their job, holding them accountable for the full extent of their responsibilities. Develops innovative solutions to problems by trying non-obvious or non-traditional approaches. Organizational Skills. Identifies and defines clear short-term goals and/or work outcomes that are required to implement strategic goals. Problem Solving. Proven ability to solve problems creatively and effectively. Detail oriented. Follows through with commitments and solves problems in a timely fashion. Deals skillfully and promptly with new situations. Ask a series of probing questions to go beyond surface issues and fully understand the components of a problem and its root causes. Analytical Skills. Verifies assumptions or interpretations by checking with credible sources or through first-hand observation and data-gathering. Computer Skills. Advanced computer skills including spreadsheets and Microsoft Office Suite is required. Skill in drawing and designing with AutoCAD/land desktop preferred. Interpersonal Communication. Must possess strong interpersonal skills and must be extremely resourceful. Communicates clearly and listens carefully in an open, candid, and consistent manner. High Integrity. Acts with unyielding integrity and honesty in business transactions, promoting company policies and holding self and other employees accountable, keeping promises and commitments. Honors your commitments to yourself and others. Acknowledging and correcting your own mistakes. Taking full ownership to address and fix problems vs. deflecting blame to others. Safety-Oriented. Sets a safety tone for all activities; and upholds the highest standards for protecting people and the environment. What You'll Like About Us:Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. The industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts our daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, and Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. Job: Engineering Primary Location: Georgia-Atlanta Other Locations: Georgia-Columbus, Georgia-Macon Organization: GM - SOD DIV OH Schedule: Full-time Job Posting: Sep 2, 2025, 4:24:25 PM

**Location:** This role requires associates to be in-office 1 - 2 days per week, fostering collaboration and connectivity, while providing flexibility to support productivity and work-life balance. This approach combines structured office engagement with the autonomy of virtual work, promoting a dynamic and adaptable workplace. Alternate locations may be considered if candidates reside within a commuting distance from an office. Please note that per our policy on hybrid/virtual work, candidates not within a reasonable commuting distance from the posting location(s) will not be considered for employment, unless an accommodation is granted as required by law. _PLEASE NOTE: This position is not eligible for current or future visa sponsorship._ At Elevance Health, we are transforming how cloud technology supports healthcare delivery and innovation. We are seeking a **Cloud FinOps Principal Engineer** to lead enterprise-wide initiatives that optimize cloud investments across AWS and Azure. This role blends deep engineering expertise, analytics, and financial acumen, enabling Elevance Health to scale cloud adoption efficiently, sustainably, and strategically. **How you will make an impact:** + Provide deep technical leadership in AWS and Azure architectures, services, and cost models, ensuring scalable and cost-efficient solutions + Recommends new technology solutions and products are delivered to stakeholders and align with enterprise strategic objectives. + Partner with senior leadership and business stakeholders to shape cloud financial strategy, driving transparency, accountability, and value realization. + Define, implement, and enforce enterprise-wide standards and policies for cloud financial operations, compliance, and cost control. + Leading and defining the overall application system technology and architecture, development. + Build and refine financial models for cloud economics, including forecasting, chargeback/showback frameworks, and profitability analysis. + Develop, automate, and maintain real-time dashboards, data platforms, and reporting solutions that deliver actionable insights on cloud usage, spend, and optimization opportunities. + Design and implement scalable automation and data pipelines for cost governance, integrating with enterprise financial and operational systems. + Is responsible for and champions architectural standards, guidelines, principles, frameworks, and reference models. **Minimum Requirements:** + Requires a BA/BS degree in Information Technology, Computer Science, or related field of study and a minimum of 11 years experience; multi-dimensional platform experience, expert level experience with business and technical applications; or any combination of education and experience, which would provide an equivalent background. **Preferred Skills, Capabilities, & Experiences:** + 10+ years in cloud engineering, FinOps, analytics, or data engineering roles, with deep experience in AWS and Azure. + Proven track record building financial governance automation and data pipelines at enterprise scale. + Strong background in cloud economics, financial modeling, and cost optimization. + Expertise with analytics platforms, data visualization tools, and automated reporting frameworks. + Demonstrated experience developing and enforcing enterprise governance policies. + Exceptional communication and leadership skills with the ability to influence senior executives. + FinOps Certified Practitioner or advanced FinOps certification. + Experience in healthcare, insurance, or other highly regulated industries. + Knowledge of emerging trends in cloud cost optimization, AI-driven forecasting, and financial governance tooling. Please be advised that Elevance Health only accepts resumes for compensation from agencies that have a signed agreement with Elevance Health. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Elevance Health. Who We Are Elevance Health is a health company dedicated to improving lives and communities - and making healthcare simpler. We are a Fortune 25 company with a longstanding history in the healthcare industry, looking for leaders at all levels of the organization who are passionate about making an impact on our members and the communities we serve. How We Work At Elevance Health, we are creating a culture that is designed to advance our strategy but will also lead to personal and professional growth for our associates. Our values and behaviors are the root of our culture. They are how we achieve our strategy, power our business outcomes and drive our shared success - for our consumers, our associates, our communities and our business. We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, and incentive bonus programs (unless covered by a collective bargaining agreement), medical, dental, vision, short and long term disability benefits, 401(k) +match, stock purchase plan, life insurance, wellness programs and financial education resources, to name a few. Elevance Health operates in a Hybrid Workforce Strategy. Unless specified as primarily virtual by the hiring manager, associates are required to work at an Elevance Health location at least once per week, and potentially several times per week. Specific requirements and expectations for time onsite will be discussed as part of the hiring process. The health of our associates and communities is a top priority for Elevance Health. We require all new candidates in certain patient/member-facing roles to become vaccinated against COVID-19 and Influenza. If you are not vaccinated, your offer will be rescinded unless you provide an acceptable explanation. Elevance Health will also follow all relevant federal, state and local laws. Elevance Health is an Equal Employment Opportunity employer and all qualified applicants will receive consideration for employment without regard to age, citizenship status, color, creed, disability, ethnicity, genetic information, gender (including gender identity and gender expression), marital status, national origin, race, religion, sex, sexual orientation, veteran status or any other status or condition protected by applicable federal, state, or local laws. Applicants who require accommodation to participate in the job application process may contact ******************************************** for assistance. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state, and local laws, including, but not limited to, the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act.

This position is responsible for performing management and engineering duties in the direction of the Stormwater Management Division. * Administers Columbus' Municipal National Pollutant Discharge Elimination System (NPDES) stormwater program. * Manages and coordinates the development and maintenance of the Stormwater Management Program Guidance document. * Manages and coordinates the completion and submission of the Annual Report as required by the Clean Water Act and Stormwater Discharge Permit. * Manages and coordinates the collection of samples and the reporting of pollutant concentrations/loads. * Manages and coordinates the illicit discharge detection and elimination program. * Manages and coordinates the public information/education and outreach program; coordinates required public involvement activities. * Manages and coordinates the NPDES Construction Activities Database. * Manages and coordinates pollution prevention programs at municipal facilities. * Manages and coordinates post-construction stormwater management inspections and evaluations. * Performs inspections at industrial and commercial facilities for compliance with local and/or state requirements. * Administers components of the National Flood Insurance Program. * Trains, assigns, supervises, evaluates, and disciplines personnel. * Serves as the Development Resource Center's Continuous Improvement/Malcolm Baldrige Coordinator. * Provides technical support to other areas within the department. * Performs other related duties as assigned. * Knowledge of the accepted principles and practices of civil engineering including wastewater and storm sewerage systems, aquatic chemistry, microbiology, analytical chemistry, statistics, and environmental science. * Knowledge of the principles and practices of flood plain management. * Knowledge of the principles and practices of adult education. * Knowledge of the methods and techniques of research, statistical analysis, and report presentation. * Knowledge of the geography of the city and other local areas. * Skill in programming automated water sampling equipment. * Skill in problem solving and decision making. * Skill in management and supervision. * Skill in operating standard office equipment including work related computer applications. * Skill in oral and written communication. Bachelor's Degree in Civil or Environmental Engineering, Natural Sciences (geology, chemistry, biology etc.) or related field is required. Experience sufficient to thoroughly understand the work of subordinate positions and to be able to answer questions and resolve problems, usually associated with one to three years experience or service. Possession of or ability to readily obtain a valid driver's license issued by the State of Georgia for the type of vehicle or equipment operated. The work is typically performed while sitting at a desk or table. The employee must occasionally lift light objects. Additionally, the following physical abilities are required: * Balancing - maintain equilibrium to prevent falling while walking, standing, or crouching. * Feeling - perceiving attributes of objects by touch with skin, fingertips. * Grasping - applying pressure to object with fingers, palm. * Handling - picking, holding, or working with whole hand. * Hearing 1 - perceiving sounds at normal speaking levels, receive information. * Hearing 2 - receive detailed information, make discrimination in sound. * Kneeling - bending legs at knee to come to rest at knees. * Lifting - raising objects from lower to higher position, moving objects side to side, using upper extremities, back. * Manual Dexterity - picking, pinching, typing, working with fingers rather than hand. * Pulling - use upper extremities to exert force, haul or tug. * Pushing - use upper extremities to press against objects with force, or thrust forward, downward, outward. * Reaching - extending hands or arms in any direction. * Repetitive Motion - substantial movements of wrists, hands, fingers. * Speaking - expressing ideas with spoken word, convey detailed, important instructions accurately, concisely. * Stooping - bending body downward, forward at waist, with full motion of lower extremities and back. * Talking 1- expressing ideas by spoken word * Talking 2 - shouting to be heard above ambient noise. * Visual Acuity 1 - prepare, analyze data, transcribing, computer terminal, extensive reading. * Visual Acuity 2 - color, depth perception, field of vision. * Visual Acuity 3 - determine accuracy, neatness, observe facilities/structures. * Visual Acuity 4 - operate motor vehicles/heavy equipment. * Visual Acuity 5 -close acuity for inspection of small defects, machines, use measurement devices, or fabricate parts. * Walking - on foot to accomplish tasks, long distances, or site to site. The work is typically performed in an office, library, or computer room.

The Electrical Engineer SR position requires 10 years of related experience and an accredited bachelor's degree in electrical engineering. Job responsibilities Include assisting in preparing and overseeing electrical power system design including scope documents, schedules, budgets, single line diagrams, elementary, and wiring diagrams layout and circuitry design knowledgeable of all applicable codes and standards, QA requirements, federal, state, and local regulatory requirements required to ensure compliance Providing technical direction of other engineers, designers, and drafters, assisting in checkout and startup of systems when necessary And must be able to effectively communicate with other groups and disciplines to ensure maximum effectiveness Providing problem solving, analytical, and interpersonal/communications skills Making independent decisions with some consultation with management, coordinating multiple projects simultaneously. Skillsets and expertise required for this position Good knowledge of engineering design principles (preferably power plant electrical system design, experience providing technical direction in preparation of design details, drawings, and calculations Experience scheduling and coordinating projects to meet cost and schedule objective Experience using AutoCAD and CAD Overlay would be a plus High level of initiative and be able to effectively plan, organize, and execute their work, able to handle design on large projects at nuclear plants with limited supervision Proficiency with applicable codes, standards, QA, federal, state, and local regulatory requirements Ability to work on multiple projects simultaneously and the ability to build effective relationships with plant staff, design engineering staff and/or vendors. Knowledge of the industry design process (IP-ENG 001) is preferred.

Summary/Objective As part of the Manufacturing Engineering team, design and develop the 3-D CAD models and supporting documentation to fully define the manufacturing and process steps required to manufacture tight tolerance, mechanical components and assemblies in a robust, repeatable, and reliable manner. This includes the design and development of fixtures, tooling, gages, and test equipment. Essential Duties & Responsibilities Define the process operations, and correct sequencing of these operations, to support the manufacture of quality mechanical components and assemblies. Design and develop fixtures, tooling, and gages using Solidworks as the primary CAD system, using best practices including DFM, DFA, DTC and stack analysis. May include the design and development of engineering and production test fixtures. A portion of this effort will require a working knowledge of AutoCad. Define the product configuration and part geometry in fully dimensioned 2-D drawings directly linked to 3-D files for each manufacturing operation. A solid understanding of GD&T is a must. Manage Bill of Materials, including a full definition of material selection and raw material configuration. Ensure proper documentation of design revisions for the full Technical Data Package including CAD, BOM, engineering masters, routings, etc. Initiate and participate in cross-functional design reviews to ensure new designs are optimized for manufacturability. Support the development and execution of project timelines. Provide technical input to Applications Engineering in support of process improvements to streamline the process from Design to finish product. Provide manufacturing floor support processing issues and promote continuous improvement initiatives. Work within a team that specifies, evaluates, justifies, and implements capital equipment projects throughout the plants and to continuously strive to evaluate technology as to its application at providing the most efficient process. Supervisory Responsibilities This position has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum 5 years of Manufacturing Engineering experience in high volume manufacturing environment. Firearms experience is a plus. Strong desire to use and develop program solutions to automate CAD/CAM processes. Knowledge of CAD / CAM software. Solidworks & Mastercam preferred. Experience in using 3D-model-centric computer aided manufacturing (CAM) principles and the associated techniques to analyze the CAD models as they relate to manufacturability. This includes utilizing the 3D-model to create toolpaths for CNC programming. Strong knowledge of GD&T. Must be organized and maintain accurate and neat records and files. Knowledge of common problem-solving and Root Cause Analysis (RCA) methodologies. Education/Experience Required: Engineering Degree. Preferred Bachelor's degree in mechanical engineering. Language Skills Ability to read, write, listen and follow instructions. Ability to read blueprints. Mathematical Skills Competent in developing systematic solutions. REASONING ABILITY Ability to develop product processes Travel Requirements Travel will normally be less than 5% (training, equipment development, satellite facility support). Other Skills & Abilities Attendance is an essential job requirement defined as having regular, consistent, reliable, punctual and predictable attendance including the ability to work regular hours and shifts, overtime before and after shifts and on weekends. Ability to work as part of a team, including all related departments/plants or independently as required to achieve internal and external customer satisfaction. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. While performing the duties of the job the employee works in a manufacturing environment and may be exposed to fumes or airborne particles, moving mechanical parts and vibration. PHYSICAL ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to talk or hear. The employee is frequently required to sit and use hands to touch, handle, or feel. The employee is occasionally required to stand, walk, reach with hands and arms, climb or balance and stoop, kneel, or crouch. The employee is occasionally required to lift up to 50 pounds. The vision requirements include close vision and ability to adjust focus. WORK AUTHORIZATION This position requires compliance with ITAR requirement. Must be a “U.S. Person” (per ITAR 120.15) and are required to show proof substantiating this upon being hired. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties and/or responsibilities may change at any time with or without notice at the sole discretion of the Company.

**Country:** United States of America , Midland, GA, 31820 USA ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tightknit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? ***2 open positions** **What You Will Do:** Columbus Forge, a recognized leader in producing disks for the aerospace propulsion market, is looking for a **Manufacturing Engineer** to support the Heat Treat organization and will learn about heat treatment and how it relates to resulting material properties. The Manufacturing Engineer is responsible for all aspects of part maturation from raw material to end use. + Develop and implement plans that are in line with the business strategy to further our world class technology portfolio. + Provide operational engineering support to develop technologies and processes which support the growth curve and cost reduction targets. + Leverage manufacturing innovations to improve cost, delivery, and quality of aerospace disk forgings; assist with problem solving during manufacturing related investigations. + Own relentless RCCA (Root Cause Corrective Action) for correcting non-conformance in the part families; perform DIVEs (Define, Investigate, Verify, Ensure); implement and monitor corrective actions; monitor and report on the health of a part family; monitoring the non-conformances and how the part 'runs' compared to 'standard' times. + Lead the CORE (Customer Oriented Results and Excellence) journey to continuously improve the quality and exceed customer's expectations; develop disk process using statistical methods that meet or exceed the business objective for process control. **Qualifications You Must Have:** + Bachelor's Degree in a STEM field and 2 or more years' experience in an engineering, manufacturing, quality or relatable industrial environment or a Master's degree and minimum 1 year of experience in an engineering, manufacturing, quality or relatable industrial environment. + Proficiency in Microsoft Office products including: Word, Excel, PowerPoint and Outlook. + Proficiency utilizing CAD software for 3D modeling and drawing creation. + U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract **Qualifications We Prefer:** + Degree in Aerospace Engineering or Mechanical Engineering + Knowledge and understanding of continuous improvement tools such as Six Sigma and LEAN **Learn More & Apply Now:** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Location: This role requires associates to be in-office 1 - 2 days per week, fostering collaboration and connectivity, while providing flexibility to support productivity and work-life balance. This approach combines structured office engagement with the autonomy of virtual work, promoting a dynamic and adaptable workplace. Alternate locations may be considered if candidates reside within a commuting distance from an office. Please note that per our policy on hybrid/virtual work, candidates not within a reasonable commuting distance from the posting location(s) will not be considered for employment, unless an accommodation is granted as required by law. PLEASE NOTE: This position is not eligible for current or future visa sponsorship. At Elevance Health, we are transforming how cloud technology supports healthcare delivery and innovation. We are seeking a Cloud FinOps Principal Engineer to lead enterprise-wide initiatives that optimize cloud investments across AWS and Azure. This role blends deep engineering expertise, analytics, and financial acumen, enabling Elevance Health to scale cloud adoption efficiently, sustainably, and strategically. How you will make an impact: * Provide deep technical leadership in AWS and Azure architectures, services, and cost models, ensuring scalable and cost-efficient solutions * Recommends new technology solutions and products are delivered to stakeholders and align with enterprise strategic objectives. * Partner with senior leadership and business stakeholders to shape cloud financial strategy, driving transparency, accountability, and value realization. * Define, implement, and enforce enterprise-wide standards and policies for cloud financial operations, compliance, and cost control. * Leading and defining the overall application system technology and architecture, development. * Build and refine financial models for cloud economics, including forecasting, chargeback/showback frameworks, and profitability analysis. * Develop, automate, and maintain real-time dashboards, data platforms, and reporting solutions that deliver actionable insights on cloud usage, spend, and optimization opportunities. * Design and implement scalable automation and data pipelines for cost governance, integrating with enterprise financial and operational systems. * Is responsible for and champions architectural standards, guidelines, principles, frameworks, and reference models. Minimum Requirements: * Requires a BA/BS degree in Information Technology, Computer Science, or related field of study and a minimum of 11 years experience; multi-dimensional platform experience, expert level experience with business and technical applications; or any combination of education and experience, which would provide an equivalent background. Preferred Skills, Capabilities, & Experiences: * 10+ years in cloud engineering, FinOps, analytics, or data engineering roles, with deep experience in AWS and Azure. * Proven track record building financial governance automation and data pipelines at enterprise scale. * Strong background in cloud economics, financial modeling, and cost optimization. * Expertise with analytics platforms, data visualization tools, and automated reporting frameworks. * Demonstrated experience developing and enforcing enterprise governance policies. * Exceptional communication and leadership skills with the ability to influence senior executives. * FinOps Certified Practitioner or advanced FinOps certification. * Experience in healthcare, insurance, or other highly regulated industries. * Knowledge of emerging trends in cloud cost optimization, AI-driven forecasting, and financial governance tooling. Job Level: Non-Management Exempt Workshift: 1st Shift (United States of America) Job Family: IFT > Engineering/Dev Please be advised that Elevance Health only accepts resumes for compensation from agencies that have a signed agreement with Elevance Health. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Elevance Health. Who We Are Elevance Health is a health company dedicated to improving lives and communities - and making healthcare simpler. We are a Fortune 25 company with a longstanding history in the healthcare industry, looking for leaders at all levels of the organization who are passionate about making an impact on our members and the communities we serve. How We Work At Elevance Health, we are creating a culture that is designed to advance our strategy but will also lead to personal and professional growth for our associates. Our values and behaviors are the root of our culture. They are how we achieve our strategy, power our business outcomes and drive our shared success - for our consumers, our associates, our communities and our business. We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, and incentive bonus programs (unless covered by a collective bargaining agreement), medical, dental, vision, short and long term disability benefits, 401(k) +match, stock purchase plan, life insurance, wellness programs and financial education resources, to name a few. Elevance Health operates in a Hybrid Workforce Strategy. Unless specified as primarily virtual by the hiring manager, associates are required to work at an Elevance Health location at least once per week, and potentially several times per week. Specific requirements and expectations for time onsite will be discussed as part of the hiring process. The health of our associates and communities is a top priority for Elevance Health. We require all new candidates in certain patient/member-facing roles to become vaccinated against COVID-19 and Influenza. If you are not vaccinated, your offer will be rescinded unless you provide an acceptable explanation. Elevance Health will also follow all relevant federal, state and local laws. Elevance Health is an Equal Employment Opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, citizenship status, color, creed, disability, ethnicity, genetic information, gender (including gender identity and gender expression), marital status, national origin, race, religion, sex, sexual orientation, veteran status or any other status or condition protected by applicable federal, state, or local laws. Applicants who require accommodation to participate in the job application process may contact ******************************************** for assistance. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state, and local laws, including, but not limited to, the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act.

SUMMARY/OBJECTIVE As part of the Manufacturing Engineering team, design and develop the 3-D CAD models and supporting documentation to fully define the manufacturing and process steps required to manufacture tight tolerance, mechanical components and assemblies in a robust, repeatable, and reliable manner. This includes the design and development of fixtures, tooling, gages, and test equipment. ESSENTIAL DUTIES & RESPONSIBILITIES Define the process operations, and correct sequencing of these operations, to support the manufacture of quality mechanical components and assemblies. Design and develop fixtures, tooling, and gages using Solidworks as the primary CAD system, using best practices including DFM, DFA, DTC and stack analysis. May include the design and development of engineering and production test fixtures. A portion of this effort will require a working knowledge of AutoCad. Define the product configuration and part geometry in fully dimensioned 2-D drawings directly linked to 3-D files for each manufacturing operation. A solid understanding of GD&T is a must. Manage Bill of Materials, including a full definition of material selection and raw material configuration. Ensure proper documentation of design revisions for the full Technical Data Package including CAD, BOM, engineering masters, routings, etc. Initiate and participate in cross-functional design reviews to ensure new designs are optimized for manufacturability. Support the development and execution of project timelines. Provide technical input to Applications Engineering in support of process improvements to streamline the process from Design to finish product. Provide manufacturing floor support processing issues and promote continuous improvement initiatives. Work within a team that specifies, evaluates, justifies, and implements capital equipment projects throughout the plants and to continuously strive to evaluate technology as to its application at providing the most efficient process. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum 5 years of Manufacturing Engineering experience in high volume manufacturing environment. Firearms experience is a plus. Strong desire to use and develop program solutions to automate CAD/CAM processes. Knowledge of CAD / CAM software. Solidworks & Mastercam preferred. Experience in using 3D-model-centric computer aided manufacturing (CAM) principles and the associated techniques to analyze the CAD models as they relate to manufacturability. This includes utilizing the 3D-model to create toolpaths for CNC programming. Strong knowledge of GD&T. Must be organized and maintain accurate and neat records and files. Knowledge of common problem-solving and Root Cause Analysis (RCA) methodologies. EDUCATION/EXPERIENCE Required: Engineering Degree. Preferred: Bachelor's degree in mechanical engineering. LANGUAGE SKILLS Ability to read, write, listen and follow instructions. Ability to read blueprints. MATHEMATICAL SKILLS Competent in developing systematic solutions. REASONING ABILITY Ability to develop product processes TRAVEL REQUIREMENTS Travel will normally be less than 5% (training, equipment development, satellite facility support). OTHER SKILLS & ABILITIES Attendance is an essential job requirement defined as having regular, consistent, reliable, punctual and predictable attendance including the ability to work regular hours and shifts, overtime before and after shifts and on weekends. Ability to work as part of a team, including all related departments/plants or independently as required to achieve internal and external customer satisfaction. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. While performing the duties of the job the employee works in a manufacturing environment and may be exposed to fumes or airborne particles, moving mechanical parts and vibration. PHYSICAL ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to talk or hear. The employee is frequently required to sit and use hands to touch, handle, or feel. The employee is occasionally required to stand, walk, reach with hands and arms, climb or balance and stoop, kneel, or crouch. The employee is occasionally required to lift up to 50 pounds. The vision requirements include close vision and ability to adjust focus. WORK AUTHORIZATION This position requires compliance with ITAR requirement. Must be a “U.S. Person” (per ITAR 120.15) and are required to show proof substantiating this upon being hired. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties and/or responsibilities may change at any time with or without notice at the sole discretion of the Company.

**Country:** United States of America , Midland, GA, 31820 USA ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. **Are you ready to go beyond?** **What You Will Do:** The Engine Life Management Team (ELMT), part of the Pratt & Whitney Aftermarket and Sustainment Engineering (ASE) team based at Columbus Engine Center (CEC), has an open on-site position at CEC for a cross functional Design-related Project Engineer supporting various (Repair and Limits) Design, Component Integrated Product Teams (CIPTs), and the Component Aftermarket Integrated Product Teams (CAIPTs) in support of aftermarket operations and the maturation of the NGPF fleet. The primary function of this position is to facilitate Repair and Limits design tasks, including Project Engineering, technical writing, and Repair and Limits Design. Secondary responsibilities will be varied but include general project management and support of various Aftermarket/CIPT/CAIPTs responsible for various GTF hardware at CEC in Columbus, GA. This position is a key role within ASE as it provides a direct engineering link to the commercial aftermarket. Candidate should be customer focused as well as technically proficient and capable of effective and professional technical communication, since this role will include direct interface with aftermarket operations, program management, and Engineering management. + Work as an onsite representative of ASE supporting Repair and Limits Design tasks and CIPT/CAIPT engine/hardware investigations and dispositions. + Coordinate and influence resources to meet technical, development and production requirements + Monitor and trend hardware health for limit updates, product improvement, and repair activities. + Liaise between Aftermarket Operations and Engineering regarding design tasks and investigation scope and implementation. + Prepare and present status and technical content to cognizant Pratt & Whitney stakeholders. + Facilitate or complete the evaluation of incoming tasks and hardware non-conformances. + Support (Repair and Limits) Design team in the resolution of EagleNet cases raised by Aftermarket Operations. **Qualifications You Must Have:** + Bachelor's degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience or an advanced degree in a related field + Microsoft Excel and PowerPoint skills and experience to effectively communicate with audiences ranging from operations to the executive level. + Requires substantial knowledge of RTX projects, programs or systems to provide enhancements within job area. + Professional technical contributor + U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract + 10% Travel **Qualifications We Prefer:** + Advanced degree and/or experience in Aerospace or Mechanical Engineering + A working knowledge of SAP, P&W Quality Systems, configuration management process. **What We Offer:** + Relocation **Learn More & Apply Now!** **What is my role type?** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.