Design engineer jobs in Palm River-Clair Mel, FL - 677 jobs

Senior Project Engineer - Heavy Civil Construction Responsibilities Review contracts, plans, and specs in full Support the Project Manager and Superintendent with daily operations Assist with schedules, cost tracking, forecasting, and quantity reporting Solicit pricing from subcontractors and vendors, including change orders Coordinate materials, equipment, subcontractors, and field crews Support billing, cash flow projections, and change order processing Manage project documentation, submittals, permits (NPDES/SWPPP), and record drawings Review daily field reports for accuracy Assist with inspections, testing, utility coordination, and project closeout Handle additional tasks as assigned by the Project Manager Requirements BS in Civil Engineering (Construction Engineering & Management preferred) 5-8 years of heavy civil construction experience (field and/or office) Strong written and verbal communication skills Proficient in Excel, Word, and Primavera P6

Designs manufacturing processes, procedures and production layouts for CCA and module assemblies. Cable harness experience and process writing are a plus. Interprets engineering prints to design processes and works with design engineering to implement production improvements. Supports the production floor by working with the operations team and focusing on continuous improvement. Designs, procures, and implements tooling to support manufacturing processes. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations and specifications. Supports the production floor by working with the operations team. Designs manufacturing processes and production layout for circuit card assemblies and subassemblies. Understands how the circuit card process works. Cable harness experience is a plus.

Manufacturing Process Engineer - Electronics / CCA Production Clearance Requirements: None Contract to Hire Pay Rate:$35/hr We are seeking a hands-on Manufacturing Process Engineer to support the design, optimization, and continuous improvement of manufacturing processes for circuit card assemblies (CCA), electronic module builds, and cable harness production. This role involves collaborating with engineering, operations, quality, and production teams to enhance manufacturability, improve workflow efficiency, develop tooling, and ensure compliance with specifications and regulations. The ideal candidate understands electronic manufacturing processes, can interpret engineering drawings, and has experience designing production layouts or writing process documentation. This is an excellent opportunity for a technical professional who enjoys supporting the production floor, driving improvements, and delivering high?quality manufacturing solutions. Responsibilities: Design and improve manufacturing processes, procedures, and production layouts for CCAs, electronic modules, and subassemblies. Review and interpret engineering prints to develop accurate and efficient manufacturing processes. Collaborate with design engineering to drive production improvements and optimize manufacturability. Support day?to?day production floor activities in partnership with operations and quality teams. Design, procure, and implement tooling, fixtures, and manufacturing aids to support efficient assembly processes. Incorporate inspection and test requirements into production plans where applicable. Monitor performance of machinery, equipment, and tools; investigate deficiencies and recommend corrective actions. Ensure compliance with manufacturing standards, specifications, and regulatory requirements. Provide feedback to engineering regarding design concepts and specification improvements. Drive continuous improvement initiatives focusing on quality, throughput, and process efficiency. Perform physical tasks including climbing stairs and lifting up to 20 lbs. Shift Schedule: Monday - Thursday, 5:00 AM to 3:30 PM EST Required Skills/Education: Experience designing or improving manufacturing processes for circuit card assemblies (CCA) or electronic modules. Ability to read, interpret, and apply engineering drawings, schematics, and technical documentation. Hands-on experience supporting production floor operations and resolving process issues. Ability to design or modify tooling, fixtures, and assembly processes. Strong understanding of manufacturing standards, quality requirements, and compliance processes. Ability to read/write in English. Ability to climb stairs and lift up to 20 lbs. Preferred Skills: Cable harness experience (routing, assembly, documentation). Experience writing or updating manufacturing process documentation. Familiarity with CCA assembly processes including soldering, inspection, reflow, or AOI. Experience working in electronics manufacturing or defense/aerospace environments. Strong continuous improvement mindset with the ability to identify process gaps and drive solutions. About Seneca Resources At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 enterprises to government organizations, we connect talented professionals with meaningful work that drives impact. When you work with Seneca, you're choosing a company that invests in your success, celebrates your achievements, and provides opportunities aligned with your career goals. Our consultants and contractors enjoy competitive pay, comprehensive health, dental, and vision coverage, 401(k) plans, and continuous support from a dedicated team committed to your professional growth. Seneca Resources is proud to be an Equal Opportunity Employer, fostering a diverse and inclusive workplace where all qualified individuals are encouraged to apply.

Electrical Engineer - Mission Critical Projects TECfusions is the fusion of Technology, Environmental Protection, and Community support. We address complex infrastructure challenges including hyperscale capacity demands, energy reliability, sustainability, environmental conditioning, and resilient power systems. Our work focuses on delivering energy-reliable, future-ready infrastructure through proven engineering practices that support global digital growth while protecting our planet. We welcome individuals who want to build meaningful, high-impact infrastructure in a collaborative, technically rigorous environment. About the Role As an Electrical Engineer, you will play a key role in the design, coordination, and execution of electrical systems for hyperscale data centers and other mission-critical facilities. You will work closely with senior engineers and project leadership while independently owning defined scopes of work and serving as a technical resource across project phases. Key Responsibilities - Develop, review, and coordinate electrical designs and documentation (BOD through IFC) - Serve as a technical point of contact for electrical coordination - Support construction and commissioning efforts - Participate in value engineering and constructability reviews - Review drawings, specifications, and calculations - Support QA/QC processes - Perform or review electrical studies - Participate in site visits and inspections - Provide guidance to junior engineers Qualifications - Bachelor's degree in Electrical Engineering or related discipline - 5-10+ years of experience - Experience with power distribution systems - U.S. work authorization - EIT or PE preferred - Strong communication and analytical skills - Willingness to travel Preferred Experience - Data center electrical systems - AutoCAD, Revit, or BIM tools - Electrical studies experience - Commissioning exposure - Power generation or renewables TECfusions is an Equal Opportunity Employer

This is a U.S. based position. All of the programs we support require U.S. citizenship to be eligible for employment. All work must be conducted within the continental U.S. Who we are: Raft () is a customer-obsessed non-traditional small business with a purposeful focus on Distributed Data Systems, Platforms at Scale, and Complex Application Development, with headquarters in McLean, VA. Our range of clients includes innovative federal and public agencies leveraging design thinking, cutting-edge tech stack, and cloud-native ecosystem. We build digital solutions that impact the lives of millions of Americans. About the role: As an ML Ops Engineer, you will collaborate with a cross-functional data team comprising AI/ML Engineers, DevSecOps engineers, Product Owners, Data Engineers, Data Analysts, and Data Scientists. Your primary responsibility will be to design, build, and maintain the infrastructure and pipelines that enable Machine Learning model training, deployment, and scaling. You will manage distributed workloads across GPU-enabled Kubernetes clusters and ensure efficient resource orchestration between training and inference operations. What we are looking for: 3+ years of relevant hands-on experience Experience building and maintaining machine learning pipelines Strong Python skills for defining and maintaining ML pipelines Practical experience with PyTorch (TensorFlow experience acceptable) Airflow for job orchestration, particularly managing resources between training and inference workloads Strong Kubernetes experience including managing local clusters, running different flavors, and managing custom resource definitions Istio networking experience in Kubernetes environments Experience working with MinIO object storage Must have hands-on experience running GPU workloads on Kubernetes Fast learner, analytical thinker, creative, hands-on, strong communication skills Able to work both independently and as part of a team Excellent problem-solving skills and attention to detail Highly preferred: CENTCOM or DoD experience Experience with time slicing GPUs on Kubernetes\ Exposure to computer vision and/or large imagery formats such as NITF Publications or GitHub repos showcasing your skills Experience with Docker and container orchestration best practices Clearance Requirements: Active TS with ability to obtain and maintain SCI Work Type: Onsite in Tampa, Florida May require up to 15% travel Salary Range: $150,000 to 220,000 The determination of compensation is predicated upon a candidate's comprehensive experience, demonstrated skill, and proven abilities What we will offer you: Highly competitive salary Fully covered healthcare, dental, and vision coverage 401(k) and company match Take as you need PTO + 11 paid holidays Education & training benefits Generous Referral Bonuses And More! Our Vision Statement: We bridge the gap between humans and data through radical transparency and our obsession withthemission. Our Customer Obsession: We will approach every deliverable like it's a product. We will adopt a customer-obsessed mentality. As we grow, and our footprint becomes larger, teams and employees will treat each other not only as teammates but customers. We must live the customer-obsessed mindset, always. This will help us scale and it will translate to the interactions that our Rafters have with their clients and other product teams that they integrate with. Our culture will enable our success and set us apart from other companies. How do we get there? Public-sector modernization is critical for us to live in a better world. We, at Raft, want to innovate and solve complex problems. And, if we are successful, our generation and the ones that follow us will live in a delightful, efficient, and accessible world where out-of-box thinking,and collaboration is a norm. Raft's core philosophy is Ubuntu: IAm, BecauseWe are. We support our "nadi" by elevating the other Rafters. We work as a hyper collaborative team where each team member brings a unique perspective, adding value that did not exist before. People make Raft special. We celebrate each other and our cognitive and cultural diversity. We are devoted to our practice of innovation and collaboration. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job DescriptionMechanical Design Engineer - Design Build Projects Tampa, Florida | Full-Time | Office-Based with Field Visits We are seeking an experienced Mechanical Engineer to join our client's Design Build team. This role is ideal for a career-minded engineer with strong technical expertise in HVAC and MEP design. You will work closely with sales and project teams to create fully engineered mechanical solutions tailored to client needs. This is a dynamic position that combines office-based design work with occasional field site assessments. With an excellent company culture, competitive compensation, and exciting growth opportunities, this is an ideal role for an engineer ready to make a long-term impact. Basic Qualifications Bachelor's Degree in Mechanical Engineering or related field 5+ years of experience in the MEP industry Proficiency with heating and cooling load calculations Skilled in CAD and drafting software Strong communication and presentation skills Preferred Qualifications Familiarity with HVAC design in healthcare, manufacturing, and commercial settings PE license or progress toward licensure Experience with energy modeling or sustainable design principles Key Responsibilities Collaborate with sales teams to develop fully engineered HVAC/mechanical solutions Conduct on-site surveys to understand customer needs and project scope Design customized mechanical systems to meet client requirements Prepare and present design recommendations and project proposals Generate accurate load calculations and system sizing Support Project Managers and field teams with technical guidance Ensure all designs meet code, compliance, and performance standards Maintain documentation and support handoff to construction teams What Makes This Role Stand Out Career Growth: Join a forward-thinking team with leadership support and room to grow Great Benefits: Employer-paid health insurance, 401(k) match, bonus opportunities, and profit sharing Stability: Work with an established firm known for excellence in MEP design and delivery Supportive Culture: Positive, team-focused environment with frequent employee and family events Work-Life Balance: Office-based role with scheduled field visits and predictable hours Apply now to submit your resume. Please provide as much detail in the resume as possible to expedite recruitment screening.

About Us Zeromark builds AI-driven counter-drone systems that actually work in combat. No PowerPoints. No hype. Just field-proven technology that saves lives. We've doubled year-over-year for two straight years, winning contracts that prove what we've always known: real innovation happens in the dirt, not in conference rooms. Our systems transform standard weapons into AI-powered platforms that detect, track, and neutralize drone threats-because a $200 drone shouldn't require a million-dollar countermeasure. Here's what makes us different: ZeroMark operators don't build from behind screens. You'll validate tech from Blackhawk helicopters, train alongside Tier-1 units (who happen to be our coworkers), and test at legendary ranges from White Sands to the cliffs of Hawaii. When we say field-tested, we mean you'll shoot it, fly with it, and push it to failure. We don't tweet about changing the world-we're too busy actually doing it. Dark humor required, thick skin recommended. If you want to make an actual impact-and have some unforgettable Tuesday afternoons along the way-let's talk. We're all about delivering practical, field-tested tech, not just theories. About the Role The Mechanical Design Engineer will be responsible for the full lifecycle of mechanical design, from conceptualization and detailed design to prototyping, testing, and production support. This role requires a strong foundation in mechanical engineering principles, proficiency in CAD software, and a passion for developing robust and reliable systems in a fast-paced environment. What you'll do Design & Development: Lead the mechanical design of complex defense systems and components, ensuring performance, reliability, and manufacturability. Create detailed 3D models, assemblies, and 2D engineering drawings using CAD software. Perform engineering calculations, simulations (FEA, CFD), and analyses to validate designs. Select appropriate materials, manufacturing processes, and components for designs. Prototyping & Testing: Oversee the fabrication and assembly of prototypes. Develop and execute test plans to validate mechanical designs against performance requirements. Analyze test data and implement design modifications as needed. Collaboration & Communication: Work closely with cross-functional teams including electrical engineers, software engineers, project managers, and manufacturing personnel. Participate in design reviews, providing technical expertise and constructive feedback. Document design decisions, specifications, and test results thoroughly. Continuous Improvement: Stay current with industry trends, emerging technologies, and best practices in mechanical engineering. Identify opportunities for design optimization, cost reduction, and process improvements. What you'll need Required Bachelor's degree in Mechanical Engineering or a related field. 3-5 years of experience in mechanical design, preferably in the defense, aerospace, or a highly regulated industry. Proficiency in 3D CAD software (e.g., SolidWorks, Creo, CATIA). Strong understanding of mechanical engineering principles, including statics, dynamics, kinematics, thermodynamics, and material science. Experience with geometric dimensioning and tolerancing (GD&T). Ability to obtain and maintain a security clearance. Preferred Master's degree in Mechanical Engineering. Experience with FEA and CFD software. Knowledge of various manufacturing processes (e.g., machining, additive manufacturing, injection molding). Familiarity with defense industry standards and regulations. Experience with product lifecycle management (PLM) software. Benefits Competitive salary and comprehensive benefits package. Opportunities for professional development and growth. Engaging work on impactful projects that contribute to national security. A collaborative and innovative work environment.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. We are seeking a candidate with 1-5 years of experience to join a multi-disciplinary team in our Orlando office. This role will primarily focus on plumbing design as well as other mechanical design tasks. We offer full service in-house architecture/engineering design capabilities and typically work on a diverse array of projects. This is a unique opportunity to work alongside architects and other engineers across a multitude of project types (theme parks, airports, college campuses, laboratories, and others). Duties and responsibilities: Works in the responsible charge of a licensed professional engineer Performs plumbing engineering calculations, edits specifications, and prepares design drawings Assists in developing project construction documents, including conducting site visits, producing specifications, developing drawings, sizing equipment and producing cost estimates. Coordinates with the other design disciplines in the delivery of mechanical designs Performs services during construction including responding to RFI's, reviewing submittals, and performing field observations Qualifications 1-5 years of related mechanical/plumbing design Bachelor's degree in mechanical engineering OR Certified Plumbing Designer Understanding of design and construction documents. Proficiency in REVIT. Knowledge of building codes. Self-starter with a proactive attitude Ability to prioritize tasks and meet deadlines Estimated Compensation Range and Benefits $80,000 - $90,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

The CAD designer uses technology to develop detailed civil construction plan for various land development projects for commercial, residential, and municipal sectors. These designs include plans for site, utilizes, grading, and storm water layout and design, from the beginning stages through final construction plans. Responsibilities & Duties: Design and develop detailed civil construction plans for various land development projects in the commercial, residential, and municipal sectors. Design and analyze engineering systems related to land development and utilities Development and delivery of calculations for site grading, establishment of utilities and roadways requirements for translation into working drawings Use software to create detailed 2D or 3D designs for complex projects. Collaborate with others to establish timelines and budgets, as well as solve problems. Stays abreast of industry trends and standards, best practices and software technology changes. Analyze situational data and come up with creative solutions. Assures integrity of AutoCAD data files created. Knowledge, Skills & Abilities: Ability to set up and manage AutoCAD drafting and plan preparation in accordance with established standards with minimal direction. AutoCAD Civil 3D knowledge (surfaces, earthworks, profiles, sections). Ability to perform basic calculations (slopes, grades, etc.). Proficiency with Microsoft Office and Adobe Acrobat. Ability to work independently and with a team. Strong interpersonal skills with the ability to communicate across teams and levels. High attention to detail and self-started with the ability to multi-task. Qualifications: Associates degree in CAD or related field of study preferred. Technical training certification in AutoCAD/Drafting. Single, Family, and Master Planned Development Experience Strongly PREFERRED. Minimum of 1-3 years of previous experience REQUIRED. Previous Land Development Experience A PLUS. Physical Demands: The physical demands section should detail the physical abilities for the role with or without accommodation. Must be able to sit and stand for long periods of time. Ability to lift a minimum of 10 lbs. Heidt Design, LLC offers competitive salary commensurate with skills and experience. This position is eligible for the following benefits: Medical Dental Vison Short-term Disability Long-term Disability Life Insurance 401(k) with company match Paid time off (PTO) Bereavement Tuition Reimbursement Package Happy Hour Friday's - Unique Culture and Family Orientated Holiday and Heidt Anniversary Parties Birthday recognition at the end of each month Happy Hours throughout the year and special events Weekly office breakfast (Typically twice a week), occasional lunches, and so much more!

Job DescriptionDescription: Salvo Technologies (Zaffiri Precision) is a fast-growing precision firearm CNC manufacturer serving industries that demand uncompromising accuracy and reliability. We combine advanced machining and manufacturing technology with a commitment to innovation, quality, and teamwork. We are seeking a highly skilled Product Design Engineer Lead who blends creative industrial design with deep mechanical engineering and manufacturing knowledge. This leader will drive new firearm concepts and accessories from initial sketches through production - balancing ergonomics, aesthetics, safety, functionality, and manufacturability to deliver industry-leading products. You will help shape the product roadmap, mentor product designers, and establish scalable design and engineering practices across the company. Position Overview This is a hands-on leadership role for a technical designer/engineer who is equally comfortable sketching form and driving tolerance analyses. The Product Design Engineer Lead will own product design execution, DFM/DFA, prototype cycles, testing, and the transfer of designs into production while coordinating closely with CNC programmers, machinists, QA, Product Development, and Management. The role requires strong judgment around firearm safety, regulatory compliance, and end-user ergonomics. Key Responsibilities · Lead design and development of new firearms, components, and accessories (receivers, slides, frames, triggers, optics mounts, etc.) from concept through production release. · Create and refine 3D CAD models, detailed drawings, and assemblies using SolidWorks, Fusion 360, or similar tools. · Apply industrial design and human factors/ergonomics principles to optimize handling, balance, and user experience. · Perform tolerance analyses, tolerance stack-ups, and engineering calculations to ensure performance and manufacturability. · Drive DFM (Design for Manufacturability) and DFA (Design for Assembly) efforts to minimize cost and cycle time while maintaining high quality. · Collaborate daily with CNC programmers, machinists, and production staff to optimize parts for machining and finishing processes. · Oversee prototype fabrication and iterative testing (bench, field, and durability testing); analyze results and execute design iterations. · Evaluate and select materials, coatings, and surface finishes-working with R&D and Quality to ensure strength, durability, and corrosion resistance. · Ensure designs comply with ATF regulations, SAAMI specifications, ITAR/other export controls, and applicable international standards where required. · Produce and maintain all technical documentation: drawings, BOMs, change orders, test reports, and revision control. · Serve as primary technical liaison between design, production, quality, sales, and customers for product-related technical inquiries and part qualification. · Mentor and lead junior engineers, designers, and technicians; establish and enforce design standards, review processes, and engineering workflows. · Identify and implement continuous improvement opportunities across product design, prototyping, and production processes. · Stay current with trends in materials science, manufacturing technologies (additive, coatings, composites), and firearms design best practices. · Support supplier selection and qualification for specialty processes and components when required. Requirements:Required Qualifications · Bachelor's degree in mechanical engineering, Industrial Design, Manufacturing Engineering, or a related field. · Hands-on experience with modern CNC machinery including programming, setup, and operation. · 5+ years of product design experience in firearms, defense, precision machining, or high-precision mechanical products - experience across both industrial design and mechanical engineering is strongly preferred. · Proficiency in 3D CAD (SolidWorks preferred; Fusion 360 acceptable). · Strong understanding of GD&T, tolerance analysis, and tight-tolerance machining practices. · Practical knowledge of machining, injection molding, casting, finishing, and other relevant manufacturing processes. · Demonstrated experience with prototype development, testing, and design validation. · Understanding ergonomics, recoil dynamics, firearm safety mechanisms, and end-user requirements. · Excellent mechanical intuition, problem-solving ability, creativity, and attention to detail. · Strong documentation skills (drawings, BOMs, test reports) and experience with revision control. · Proven ability to collaborate cross-functionally with engineering, CNC programming, production, and quality. · Collaborate with design, engineering, quality, and production teams to develop and implement CNC machining strategies. · Program, set up, and operate CNC machines to produce high-quality components in accordance with design specifications. · Optimize machining processes through trials, simulations, and tests to identify the most efficient tools, speeds, feeds, and tool paths. · Create and maintain CNC programs using CAD/CAM software, ensuring accuracy and repeatability. · Must be legally eligible to work with controlled firearm components and comply with U.S. ITAR and other applicable regulations. Preferred Qualifications · Direct experience designing tactical or sporting pistols and related components. · Familiarity with FEA or other simulation tools for strength and dynamic analysis. · Experience in rapid prototyping: 3D printing, CNC prototyping, polymer additive methods. · Background in optics, mount systems, or accessory design. · Hands-on firearm enthusiast with experience and understanding of law enforcement, defense, or competitive shooting needs. · Prior leadership experience in product development or engineering team management. · Proficiency in CAD/CAM software such as SolidWorks, Mastercam, or Fusion 360 · In-depth understanding of machining principles, cutting tools, materials, and feeds/speeds optimization. · Strong ability to accurately interpret engineering drawings, blueprints, and technical specifications. Physical & Work Environment Requirements · Ability to work in a manufacturing and prototype shop environment and to be present for prototype builds and testing. · Comfortable handling precision components and assemblies; able to lift up to 35 lbs. when necessary. · Strong attention to detail and capacity for extended focused work during design review and testing activities. · Occasional travel for field testing, vendor visits, or customer meetings may be required.

SUMMARY: This position requires the ability to lead and advocate for multiple projects. Manages and coordinates priorities with the Engineering Manager, coordinates with team members and collaborates with customers. Follows projects through from inception to completion; coordinates all tasks using the appropriate personnel, reporting the status to the stakeholders, and leading for the cause. ESSENTIAL DUTIES AND RESPONSIBILITIES INCLUDE THE FOLLOWING: Design new products or make improvements to existing projects following Stage Gate Process Determine Manufacturing Costs and Requirements Ability to manage projects efficiently and timely. Evaluate New/Changes and seek feedback from the Internal and External Customers Review/Initiate Cost-Savings by following the Stage Gate Process Create/develop BOM's Collaborate with Production to create/develop Preliminary Routes and work instructions Creation/Editing of Specifications in collaboration with the Engineering team. Collaboration with Quality in identifying on the specification the critical characteristics/features that are essential to the function of the product. Collaboration with Quality and Production to ensure the Product Verification Testing performed within Production is aligned with the Market expectations of the Product function. Participate in custom order processing. QUALIFICATIONS/EXPERIENCE: 3+ years relevant experience required Solid knowledge on various engineering disciplines, procedures and policies is also required. ERP experience required Possess good project skills Good communication skills Strong decision-making skills is a must 3D CAD Skills, Autodesk Inventor experience a plus. EDUCATION: Bachelor's degree in Engineering or Associate degree in a related engineering field with applicable experience is required LANGUAGE SKILLS: Detailed understanding of engineering disciplines, procedures and policies which results in business development is required. MATHEMATICAL SKILLS: Candidate must have the ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. REASONING ABILITY: Candidate must have the ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exits. Candidate must also have the ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Lifting 25/lbs. or more may be required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT: Must be able to work with constant interruptions, also some lifting is required. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderately quiet to loud

The Product Design Engineer will work to design, develop, and maintain screw-in hydraulic cartridge valves. The candidate will be the technical owner of various product lines based on technical expertise. The Design Engineer is challenged with being a key contributor to the continuous improvement of our cartridge valve technology product portfolio, both locally and globally. Duties/Responsibilities: * Responsible for all aspects of given product line(s) by developing and maintaining requirements of the design * Submit and carry out Engineering Change Notices (ECNs) effective and efficiently * Coordinate with manufacturing engineering and operations teams for: * Design for Manufacturing, Cost, Assembly * First Pass Yield (FPY) Improvements * Design custom cartridges for customer specific applications utilizing specialized software to create models and drawings of products * Work with customers, distributors, integrators, etc. to answer technical questions and specify appropriate cartridge utilization * Provide technical guidance and expertise on design related issues * Drive the project management of new applications from initial conception to final commissioning/in-field testing through to production release * Prepare and deliver presentations at reviews and meetings Required Skills/Abilities: * Hands-on capability to carry through the complete project from conception to final sign-off by the customer * Ability to understand complex mathematical relationships that underpin mechanical analysis * Ability to read and interpret blueprint documents * Ability to proficiently utilize CAD/3-D Modeling Software * Ability to coordinate and communicate tasks across a wide range of cross-functional teams * Extreme attention to detail Education and Experience: * B.S. degree in Mechanical Engineering or Mechatronics is highly preferred. * Experience in the use of simulation tools (e.g., FEA, CFD, 1-D, etc.) * Knowledge of screw-in cartridge, sub plate mounted and stackable mobile sectional valves, as well as a solid understanding of hydraulic components, circuits, and systems * Thorough understanding of materials, linear and nonlinear behavior of materials, fatigue, and corrosion * Understanding of GD&T standards and best practices * Understanding of 6 Sigma principles Physical Requirements: * Ability to sit for prolonged periods of time * Ability to lift to 35 pounds

… The mechanical designer at Power Design is the brain behind the design of mechanical and plumbing systems on our large-scale projects. As the mechanical designer, you'll work on HVAC load and plumbing flow calculations, equipment selections, and ductwork and piping layouts. position details/responsibilities… Coordinate the best design solutions for mechanical and plumbing systems by applying industry knowledge and quality standards while considering customer needs and budgeting requirements. Provide design direction, support and guidance to all team members, including working directly with Revit CADD technicians to ensure quality and review constructability. Communicate effectively with customers, project team members and inspecting authorities. here's what we're looking for… A team player who always acts with customers in mind and thrives in a constantly changing and evolving environment and has at least three (3) years of relevant mechanical/plumbing design experience. Someone with working knowledge of constructability and strong design fundamentals for mechanical and plumbing systems and installation methods required. Experience with VRV, WSHP and DX Split systems and/or CADD/Revit experience, as well as a bachelor's degree in engineering, is preferred. Detailed knowledge of mechanical and plumbing codes. (IPC, IMC, IBC, ASHRAE) An excellent communicator who is able to read and interpret blueprints, submittals and specifications and perform basic plumbing calculations. Knowledge of HVAC load calculations using Trane Trace or similar HVAC load and energy analysis programs, as well as experience in duct sizing, layout and design for air systems. Demonstrate and uphold all of Power Design's core values, which include integrity, accountability, teamwork, innovation and growth. At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool nationwide

The Engineering Division of Honeycomb Company of America, Inc., has an opening for an Aerospace Manufacturing Engineer with particular expertise and experience in aircraft composite and metal bonded structures. Primary Responsibilities: · Establish manufacturing requirements derived from OEM engineering drawings, process specifications, loft data, and contracts.· Create total manufacturing instruction package for the fabrication of aircraft metal bonded and composite structures. · Create BOMs, CAD drawings, and detailed manufacturing instructions that establish procedures for detail parts, assemblies, and tooling, as well as inspection and test requirements.· Provide immediate technical support to manufacturing personnel (work instruction clarification, performing redlines).· Support Quality department with non-conformance investigations.· Support Purchasing department in selection of materials and suppliers.· Work in coordination with all departments (Engineering, Production, Purchasing, Quality, etc.). Develop process solutions enabling increased throughput, cost savings, and quality performance. · Serve as a key contributor in the company's growth strategy and commitment to exceed customer expectations. Required Knowledge/Skills, Education and Experience:· Bachelor's Degree in Aerospace or Mechanical Engineering. · 1-3 years of experience in the manufacture or repair of aerospace composite structures. · Experience using SolidWorks CAD software.· Experience with metal bonding processes.· Experience with composites and plus.· Experience with loft data interpretation and 3D modeling.· Knowledge in areas such as NC routing, sheet metal manufacturing, brake forming, welding, machining, heat treating, chemical processing, anodizing, chem-milling, stretch forming, hydro-forming, composite layup and cure, fiberglass, carbon fiber, and Kevlar. · Highly motivated and able to work effectively in a high-paced, dynamic, and collaborative environment. · Must be able to work effectively across functional teams, and independently. · Strong ability to successfully manage multiple projects simultaneously · Must be a detail oriented, hands-on individual, with strong written and verbal communication skills.· Functional knowledge of CATIA, Fibersim, and model based definition. · Experience working with NADCAP requirements, as well as ISO9000, AS9100, AS9102. · Experience with ERP/MRP Systems. Physical Demands The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; climb stairs, use hands and fingers; and reach with hands and arms. Ability to lift up to 15 pounds several times a day, and lift up to 40 pounds on an occasional basis. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Honeycomb Company of America is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, marital status, family responsibilities, pregnancy, genetic information, protected veteran or military status, other categories protected by federal, state, or local law, and regardless of whether the qualified applicants are individuals with disabilities. Honeycomb Company of America is a Drug-Free Workplace. Offers of employment with Honeycomb Company of America are conditioned upon the successful completion of a background check and drug-test, subject to applicable laws and regulations.

JOB TITLE: (P) Manufacturing Engineer PAY RATE: Up to $43/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Shift: Monday-Thursday, 3:30 PM - 2:00 AM EST Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Designs manufacturing processes, procedures, and production layouts for cable harness assemblies and subassemblies. Interprets engineering drawings to develop and optimize processes and collaborates with design engineering to improve manufacturability. Supports the production floor by partnering with operations to drive continuous improvement. Designs, procures, and implements tooling to support manufacturing processes and may incorporate inspection and test requirements into production planning. Monitors equipment and tool performance, investigates deficiencies, and initiates corrective actions to ensure product quality and process efficiency. Provides input to engineering on design concepts and specifications to optimize manufacturing methods. Ensures all processes and procedures comply with applicable regulations and specifications. Requirements: Bachelor's degree in Manufacturing, Mechanical, Industrial Engineering, or a related discipline Must understand cable assembly processes Must be able to read and write in English Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

We are seeking a sharp, driven, on\-site Manufacturing Engineer to develop SOPs, work instructions and process documentation. This role is for a someone determined to make an impact to our business and learn in a hands\-on capacity with a strategic aerospace company. If you are a self\-starter with a hunger for success and troubleshooting, this is your chance to shine! Requirements Key Responsibilities: SOPs: creating and developing for manufacturing processes to standardize operations Work Instructions: developing clear, step by step instructions for operators and technicians Process Documentation: document the sequence of operations, workflows and interactions between different stages of production Who You Are: College graduate with an Engineering degree Manufacturing experience in a team environment for at least one or more years Must be able to work with ITAR products and related data without restriction "}}],"is Mobile":false,"iframe":"true","job Type":"Contract","apply Name":"Apply Now","zsoid":"689506860","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Airline \- Aviation"},{"field Label":"City","uitype":1,"value":"Clearwater"},{"field Label":"State\/Province","uitype":1,"value":"Florida"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"33765"}],"header Name":"Manufacturing Engineer","widget Id":"5**********0072311","is JobBoard":"false","user Id":"5**********0751003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"5**********8786053","FontSize":"12","location":"Clearwater","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"951ctcdc443cbcd1e43439238ec196e13f682"}

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Job Description Job Summary Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest: Manufacturing Engineering Internship: In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation. Essential Responsibilities Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to: * Learn and understand state-of-the-art methods of manufacturing, * Support manufacturing and repair processes for component hardware and/or overall engine assembly, * Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls * Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives * Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment * Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen Qualifications/Requirements: * Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding * Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below) * Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations * Reliable transportation, as many of our sites do not have public transportation available Degrees accepted: * Aeronautical/Aerospace Engineering * Ceramic Engineering * Chemical Engineering * Civil Engineering * Computer Engineering * Computer Science * Electrical Engineering / Electrical & Computer Engineering * Engineering Technology (various) * Fiber/Polymer Science * Industrial Engineering * Manufacturing Engineering * Materials Science/Engineering * Mechanical Engineering * Systems Engineering * Welding Engineering Or any relevant or similar major to the ones above Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired characteristics: * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with honesty, contributes constructively * Focused: quick learner, strategically prioritizes work, committed, and takes initiative * Leadership ability: strong communicator, decision-maker, collaborative teamwork * Problem solver: analytical-minded, challenges existing processes, critical thinker * Comfortable working in a fast-paced shop floor environment around various machine tools and equipment * Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering * Demonstrated commitment to community and/or university involvement Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

We are seeking a motivated Civil Project Engineer to play a key role in the planning, design, and execution of educational, sports, and other land/site development projects. The project engineer will work closely with our civil engineering and architecture teams to support the development of municipal parks and recreation, K-12, higher education, professional athletic facilities, and other land/site development projects, ensuring projects are designed with functionality, sustainability, and safety in mind. Your Impact: Assist in Design: Collaborate with the civil and architectural teams in designing site plans, utilities, drainage, and grading solutions. Site Evaluation: Conduct site visits and help prepare reports, documenting site conditions and potential challenges related to athletic, educational, and other site development facilities. CAD Drafting: Work with CAD staff to modify and update design drawings using AutoCAD or other relevant design software. Aid in developing civil engineering plans, including sports field layouts, stormwater management systems, transportation access, and utility layouts. Technical Support: Prepare engineering-related calculations and specifications. Perform drainage system design and calculations including stormwater management systems and storm sewer sizing. Perform water distribution and sanitary sewer collection system design and calculations. Collaboration: Work alongside other engineers, architects, landscape architects, contractors, and stakeholders to ensure alignment between civil engineering designs and architectural goals, specifically tailored to sports and educational environments. Sustainability Focus: Participate in projects aimed at creating environmentally responsible and energy-efficient facilities. Regulatory Research: Assist in researching local, state, and federal codes and regulations relevant to the project, including the different levels of athletic facilities. Documentation and Reports: Prepare technical documentation, reports, and presentation materials for review by senior engineers and project managers. Project Support: Provide general support to the engineering team, including assisting with cost estimates, timelines, and coordination of project tasks Construction Administration Support: Provide review of submittals and answer Contractor's RFIs. Perform periodic site observations during construction and prepare site observation reports. Assist in certifications and project close-out. Here's What You'll Need: Bachelor's or Master's degree in Civil Engineering, Environmental Engineering, or related field, from an ABET accredited university required. Applicants for this position are expected to have 2-5 years of experience since graduation working in the A/E/C industry. Previous full-time experience related to land/site development design in Florida is a plus but not required. Engineering Intern (EI) License required. Passed Florida PE Exam preferred, with the expectation of obtaining a Florida Professional Engineering license once qualified. Highly proficient with AutoCAD drafting skills, with a working knowledge of Civil 3D. Highly proficient with design software such as StormWise, StormCAD, WaterCAD, or other industry-related software. Highly proficient with MS Office suite. Strong interest in designing and improving athletic and educational facilities. Excellent communications skills, both oral and written. Excellent interpersonal skills with coworkers, owners, and public agency officials. Ability to handle multiple tasks and deadlines in a fast-paced environment. Familiarity of land development codes, environmental regulations, and construction processes.

CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers and consumers alike. With operations in 39 countries employing approximately 25,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated and driven individuals. Division: Crown's Food Division is a premier manufacturer of food cans and ends. Our complete array of food packaging serves a variety of markets, including fruit, vegetables, dairy, fish, meat, ready meals, pet food, infant milk powder and other dry food products. We offer a wide selection of food cans from round to bowl as well as shaped cans. We truly focus on excellence. Here is your chance to join the Crown Food Business Unit. Location: Ideal candidate will reside near a major airport in the Midwest and/or Eastern Region of the US as this position will require up to 70% regular travel to the Plant locations. Position Overview: The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. This position will work closely with the manufacturing facilities in regard to electrical programming, problem solving, etc. for both the 3-Piece and 2-Piece steel and aluminum food cans and end processes. Duties And Responsibilities: Reporting directly to the Sr Manager Production Engineering (Electrical) duties would include but not be limited to the following: Providing problem-solving on electrical technical matters relating to food can and end performance Developing full documentation package of new and existing installations Continued support of new installations and plants until production efficiencies and goals are met Support plants and personnel as required to identify production problems or issues, identify viable solutions and implement the same Develop job completion schedules and monitor their progress Guide, support and train plant electrical teams Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements BS degree in Electrical or Electronics Engineering or a related discipline 5+ years in a packaging manufacturing environment, food production or a similar industry. Strong technical knowledge demonstrating broad understanding of electrical power and controls design and installation Demonstrated experience in PLC logic programming, documentation, and troubleshooting control programs (Allen Bradley, Siemens, Modicon, etc.) Experience with facilities power distribution (including voltages to 600v & three phase) and control systems and subsystems Power transmission equipment such as gearboxes, drive trains, conveying equipment, etc. Proven record of delivering engineering outputs to achieve scheduled targets Effective communication skills are needed for this role, both verbal and written as well as the ability to interact with employees at all levels of the organization. Self-motivated and eager to take the initiative; with the ability to work effectively in a team setting and as an individual Well organized and detail oriented with good time management skills Strong PC skills are a must, especially using Word, Outlook, and Excel. Committed to on-going personal development and career growth Preferred Requirements Steel and/or aluminum manufacturing environment experience would be ideal A certification in Six Sigma and/or Lean Manufacturing would be a plus Physical Requirements While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl The associate may lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus Working Conditions Will be required to perform job duties outside of the typical office setting in a plant environment as well as in an office. While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic. The associate may be exposed to a wide range of temperatures. The noise level is frequently loud. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.