Design engineer jobs in South Fayette, PA - 563 jobs

Piping Design Supervisor I Matrix PDM Engineering Pittsburgh, PA, USA Job Category: Engineering Piping Design Supervisor I | Matrix PDM Engineering The Piping Design Supervisor I provides day-to-day supervision of all Drafters and Checkers within their group. They have complete responsibility on all assigned jobs to obtain necessary information, coordinate project needs with the Region and Shop and assure drawings are produced and checked properly. This also includes responsibility for issuing jobs on time. The Design Supervisor I will serve as a discipline design lead for projects, managing internal and external resources as assigned/required. May act as a Project Disciple Lead (PDL) for all disciplines. Essential Functions Actively supports the Company's commitment to safety and its “Core Values.” Represents the Company at all times with high moral standards while adhering to the Company's “Code of Business Conduct and Ethics.” Directly supervise all Drafters and Checkers within a division of the drafting group. Coordinate project needs with the Region, client and fabrication. Assure that all work produced by their team is correct, meets the Regions' request and all current standards and procedures are followed. Review all jobs when received to determine scope of work, man-hour estimates and communicate achievable delivery dates. Effectively communicate and coordinate internally with engineers and other stakeholders to seek support as needed. Helps develop efficient work processes and procedures to provide accurate deliverables in a timely manner. Prepares and manages scope, budget and schedule for projects or assignments. Determine ability to meet required schedule. Responsible for meeting schedules and estimates. Keep management informed of job status pertaining to schedule and budget, as well as staffing availability and/or needs. Research and provide solutions for problems and errors found by the shop and field personnel. Communicates a strong sense of urgency about solving problems and getting work done. Conduct training on job requirements specific to their division. Interviews, hires, trains, evaluates and terminates subordinate personnel. Establishes team and individual goals/objectives and directs, and actively participates as necessary, subordinate personnel in achievement of responsibilities and objectives. Leads team in a collaborate manner, driving results, while developing strong relationships. Perform duties of Checker, as needed. Perform additional responsibilities, as directed. Qualifications 8+ years of related piping design and layout experience; previous supervisory or lead experience highly preferred. 2+ years of experience at Matrix preferred. Strong customer service orientation and good problem-solving abilities Advanced 3D CAD system knowledge (such as CADWorx, PDMS or AVEVA); experience with AVEVA platform highly preferred. Strong understanding of various drafting disciplines such as piping, mechanical, etc. General understanding of fabrication, purchasing, and field construction. Strong aptitude for reviewing, interpreting, and understanding Piping and Instrumentation Diagrams (P&IDs), vendor drawings, and piping details. Safety in Design exposure highly preferred. Advanced knowledge and understanding of API, ANSI, ASME and various codes and standards required for piping design. Ability to understand and use general math and advanced trigonometry functions. Advanced knowledge and understanding of API 650 and API 653 is required. Familiarity with other related codes, standards and industry practices is desired. Strong computer skills including MS Office Suite (Excel, PowerPoint, Outlook, etc.). Cooperates with other team members; interacts with individuals at all organizational levels in professional manner. Demonstratives a proactive approach and consistently positive demeanor. Occasional overtime may be required. Follow us at Matrix PDM Engineering and Matrix Service Company to view all of our open positions and for the latest news about our operating companies and our teams. Full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, paid time off, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program, tuition reimbursement and adoption assistance. Some employees may also be eligible for a performance or safety bonus program. At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets Employer We are an Equal Opportunity. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category. Applicants must be currently authorized to work in the United States on a full-time basis. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Are you ready to put your mechanical design and estimating expertise to work with an industry leader in distribution systems? Join our client's Manufacturing Group-where we design and deliver tailor-made, cost-effective solutions that keep industries moving forward. What You'll Do Turn RFQs into reality by developing accurate cost estimates and detailed mechanical drawings Use AutoCAD, SolidWorks, or Illustrator to design innovative solutions Collaborate with purchasing, sales, and management to create cost-effective, high-quality projects What We're Looking For 3+ years of Mechanical Design and Estimating experience 2-5 years of CAD proficiency (AutoCAD, SolidWorks, Illustrator) Familiarity with ERP systems and Microsoft Dynamics CRM (a plus) Why Join Us? ✔ Competitive salary: $80,000 ✔ Excellent benefits package: Medical PPO plan with low deductibles ($1,500) + wellness credit up to $750 401(k) with up to 12% company match This is more than just a role-it's a chance to engineer your future with a team that values innovation, precision, and teamwork. 🚀 Apply today and help us build the next generation of conveyor solutions!

$65k-$80k + Progression + Training + Medical + Dental + Vision + Life + PTO + 401(k) Pittsburgh, PA (Commutable from: Monroeville, Penn Hills, Plum, Murrysville, Greensburg, Wilkinsburg) Are you a detail-driven Design Engineer with strong production and manufacturing expertise? Do you want to play a key role in designing new tooling, driving engineering accuracy, and supporting efficient production in a fast-paced environment? This is an exciting opportunity to join a long-established manufacturing business where you'll own tooling projects from concept through completion. You'll work cross-functionally with engineering, production, and quality teams to ensure designs meet customer requirements while supporting high-yield, efficient manufacturing. An excellent opportunity for a hands-on Design Engineer to take ownership of tooling development, support continuous improvement, and grow into future leadership roles based purely on performance and ability. You will be responsible for managing tooling design projects, generating detailed models and drawings, and ensuring that all critical design features are captured, validated, and documented through a structured engineering process. The Role: Lead tooling design projects, ensuring all customer and production requirements are met Create AutoCAD models and technical drawings Collaborate cross-functionally with engineering, production, and quality teams The Candidate: Bachelor's degree in mechanical, Manufacturing, or Industrial Engineering Experienced with CAD CAM From a manufacturing and production background To apply for this role or to be considered for further roles, please click "Apply Now" or contact Stuart Sale at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications, and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.

Eaton's Power Components Division is currently seeking a Manufacturing Engineer. This is an on-site position based at our Beaver, PA location. The expected annual salary range for this role is $68000 - $99000 a year. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Manufacturing Engineer is responsible for providing a broad range of professional continuous improvement support to the manufacturing operations. Tasks include providing lead project responsibility for the execution of projects and project assignments within the Operational Excellence department; develop engineering and process control documentation for manufacturing needs; provide coordination and technical guidance to production personnel as appropriate. You will support planning and execution of technical projects related to manufacturing methods, material flow, processes, facilities, systems, and equipment upon gaining comprehensive knowledge of existing capabilities and new technologies. This role will manage capital projects, evaluate, and initiate orders for machinery and other equipment required for production processes. This role focuses heavily on reducing waste, cost, inefficiencies, while increasing value and driving lean transformation in assigned production areas by leading/participating in continuous improvement (CI) activities (Kaizen events, use of Six Sigma tools, Lean Material Flow, etc.) Key Responsibilites: Identify and execute cost-out projects through productivity improvements Promote a culture of continuous improvement by applying lean manufacturing techniques to eliminate waste and deliver products to customers' expectations Develop and maintain robust, cost-efficient manufacturing processes Integrate equipment and systems using Industry 4.0, including implementing Automation Lead and support execution of capital projects as defined by plant leadership Use ELSS tools and CI strategies to improve performance on assigned production lines Lead formulation of manufacturing documentation, standard work sheets, control plans, and production area layouts Conduct time studies to establish or verify labor standards Qualifications: Required (Basic) Qualifications: Bachelor's degree in Engineering from an accredited institution No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of the specified job location(s) will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation. Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc Preferred Qualifications: Minimum of 1 year of engineering experience in a manufacturing environment or equivalent engineering experience from co-op/internships Experience using CAD software (i.e., AutoCAD, Inventor, Solids Works, Creo, etc.) Experience with robotics or automation Industry 4.0 digitalization experience Project management experience Skills: Excellent analytical, problem-solving, interpersonal, and facilitation skills Strong communication and presentation skills Understanding and use of lean tools Familiarity with problem-solving methodologies (e.g., 8D, 5 Why, and A3) used to identify root causes and implement corrective and preventive actions Ability to travel approximately 10% We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-###-#### to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Job Title: Experienced Electrical / Computer Engineer Status: Full-time Professional Annual Salary Range: $97,700 - $170,720 *Salary commensurate with education and experience. As an Electrical / Computer Engineer at BPMI, you will be a technical project engineer responsible for the development of nuclear reactor instrumentation and control systems, power distribution systems, or related devices beginning with system concept and continuing through the end of system life. Essential Duties: Lead preparation of system performance and test specifications. Lead efforts for verification and approval of supplier designs. Engineering follow through manufacturing, test, and installation to ensure projects meet schedule and budget. Provide technical oversight to ensure resolution of fielded equipment problems. Communicate extensively with customer and supplier personnel. Mentor and train lower-level employees. The essential duties identified are representative but are not intended to be an exhaustive or inclusive list of all the responsibilities of the position. What You Can Expect: A culture that values people through recognition of accomplishments, work-life balance, and a sense of community. A diverse group of talented individuals working toward the common goal of supporting the United States Navy in their pursuit of national security. Competitive and attractive pay and benefits with a stable organization. Opportunities to participate in BPMI sponsored committees and clubs, each with their own mission and purpose. Career advancement and professional development programs. Minimum Job Requirements: Bachelor's or Master's degree in Electrical or Computer Engineering from an accredited college or university. A minimum of six (6) years of relevant experience with electrical instrumentation, control, and/or power conversion equipment. Previous experience should include experience in one or more of the following areas: electrical system design and integration; embedded system design; analog and or digital circuit design; solid-state power conversion. Requires a security clearance; however, all qualified candidates will be considered regardless of their current clearance status. The ability to obtain and maintain a Department of Energy security clearance is required. Preferred Job Requirements: Knowledge of microprocessors, digital signal processors, complex logic devices (including VHDL), software, power semi-conductors, and electromechanical devices. A proven track record of effective written and verbal communication skills. Experience with agile developments. Successful project management experience or training/certifications in project management. Use of requirements management systems, development of design specifications, and familiarity with military specifications. Creative problem-solving capabilities including implementation of methods to reduce project cost and schedule. Why BPMI? Bechtel Plant Machinery, Inc. (BPMI) is a prime contractor for the Naval Nuclear Propulsion Program (NNPP). BPMI is involved in the design, purchase, quality control, and delivery of major propulsion plant components for installation in nuclear-powered aircraft carriers, submarines, and prototype plants for the U.S. Navy. Teamwork, cooperation, and the pursuit of excellence have been the driving forces behind the growth and success of BPMI. For more information, visit ****************** . BPMI is a drug-free workplace. Candidates accepting a job offer will be required to pass a pre-placement drug screening and background investigation. As an employee, you will be required to receive and maintain a security clearance from the United States Department of Energy in order to meet eligibility requirements for access to sensitive information or matter. U.S. citizenship is a requirement for security clearance applicants. All employees are subject to being randomly selected for drug testing without advance notification. Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities. BPMI123

The Senior Advanced Manufacturing Engineer will work with internal stakeholders and outside contractors to execute projects to support manufacturing scale up. This will require managing medium to large scale projects from concept, through capital funding planning and approval, and ultimately through successful implementation of automation and facility projects to meet the goals of the business. Responsibilities Demonstrated ability to effectively work with suppliers, outside contractors and stakeholders and recommend development of best practices to improve assembly/manufacturing methods and procedures. Impacts the achievement of part design related to design for assembly/manufacturing, error proofing, fixture design, and incorporating quality monitoring and improvement measures to drive results. Works independently and as part of a team on complex projects. Collaborate with partner groups in development and review of manufacturing process for new products, design changes, or new manufacturing methods. Recommend, evaluate, and implement new technologies to improve efficiency or enhance flexibility of manufacturing operations with a focus on launch site capability. Partner with leadership, operations and engineering teams to ensure that new equipment projects align with the manufacturing strategy and build plans. Be accountable to deliver operability, reliability, and functional integrity of automated manufacturing equipment for handover to operations. Lead facility expansion efforts to support scaling of manufacturing sites, new and existing. Education and Experience Bachelor's degree in engineering preferred Minimum of 10 years' experience Experience and understanding of complex automated manufacturing systems and components (electrical and pneumatic control, PLC and HMI devices, sensors, servo motors, vision systems, and robotics) Good understanding of supporting processes associated with the operations and maintenance of a production plant. Experience in manufacturing engineering and plant operations with direct experience in automated production processes, equipment support, and manufacturing best practices. Proficiency in use of AutoCAD Travel Overnight/North America: Less than 10% Working Conditions Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body. Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 35 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

If a culture of excellence, innovation and ownership is what you're searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve's position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Plans, directs, and coordinates manufacturing processes involving machining, assembly, and testing. Develops, evaluates, and improves manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling, and production. Analyzes and improves quality, cost, and delivery by using Lean and Six Sigma tools. Provides engineering support in production departments by trouble shooting and resolving technical issues. Location: Bridgeville, PA. Work schedule: 100% on-site. Mondays to Fridays from 7 am to 4 pm. Responsibilities: Investigates project/capital equipment proposals, develops justification, prepares requests for expenditure, acquires equipment, installs equipment, and ensures that justification goals are achieved. Partners with Manufacturing Supervisors to achieve Flowserve goals and objectives. Specifies and acquires factory supplies that reduce costs and improve effectiveness. Ensures availability of CNC programs to support new products and customer requirements. Assists with training, instructing, and maintaining a flexible operator CNC programming and tooling skill base. Ensures tooling and fixtures are available to support customer demand. Troubleshoots processed and equipment minimizing delays in production schedules. Assists with development of the profit plan and the manufacturing strategic plan. Track assigned capital projects and expenditures status to ensure timely completion and within budget. Keeps abreast of new developments in the field of machine tool equipment, tooling, and methods. Recommend innovative solutions when applications are feasible to improve throughput and quality. Understands and supports all Company objectives and performs duties delegated by management. Enforces safety rules by ensuring that tooling, fixtures, and process meet all applicable OSHA regulations. Enforces Flowserve's environmental policies by ensuring that processes meet all applicable environmental regulations. Subcontractors are made aware of Flowserve's applicable environmental policies and are managed to these policies. Demonstrates the ability and willingness to be a team player. Treats all customers and fellow employees with respect. Other duties as assigned. Requirements: BS or BA Degree in Manufacturing, Industrial or Chemical Engineering. At least 3 years of experience working within a manufacturing environment, exposed to manufacturing methods or procedures related to machining, assembly and/or welding. Skilled in AutoCAD, SolidWorks, DraftSight, for 2D/3D modeling Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, and procedures. Ability to write routine and technical correspondence. Ability to speak effectively before groups of customers or employees of the organization. Ability to comprehend and apply principles of advanced geometry, trigonometry, modern algebra, and advanced statistical theory. Ability to define problems, collect data, establish facts, and draw valid conclusions. Experience interpreting a variety of technical instructions in mathematical or diagram form and dealing with several abstract and concrete variables. Preferred: Proven track record of leading and driving cost reductions in a manufacturing environment utilizing Continuous Improvement Methodologies. Experience working with pump parts. Benefits Starting from Day 1: Medical, Dental & Vision Insurance (including FSA and HSA options) Life Insurance + Supplemental Life, Child, Spousal, and AD&D Insurance Short and Long Term Disability Retirement Planning, 401(k) plan, & Financial Wellness Resources Educational Assistance Program Time off Policies (including sick leave, parental leave, and paid vacation) Eligibility requirements apply to some benefits and may depend on job classification and length of employment. Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Req ID : R-17185 Job Family Group : Engineering Job Family : EN Engineer - Multifamily EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to [email protected]. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Job DescriptionAre you passionate about mechanical design and innovation? Do you thrive in a collaborative environment where your expertise can make a real impact? Look no further! We're seeking a talented Mechanical Designer to join our dynamic team. The Kurt J. Lesker Company is a dynamic, rapidly growing international manufacturer and distributor of thin film deposition systems and components for the vacuum technology market. Our products are used in a variety of applications including semiconductor, space exploration, automotive, solar, medical devices, and several other world-changing technologies. We pride ourselves on our strong team culture and dedication to sustainability, which has enabled us to continue to innovate and expand year after year. As a privately held company, we are able to focus on the long term and invest in the future, which has allowed us to stay at the cutting edge while providing stability and growth for our employees for the last 70 years. Join us and be a part of something truly special. Overview of Responsibilities: As a Mechanical Designer, you'll lead the charge in creating cutting-edge mechanical components based on standard products. Your designs will drive innovation, elevate our product offerings, and breathe new life into existing products. Whether optimizing performance, enhancing functionality, or adapting for new projects, your creativity will shine. Your meticulous attention to detail will produce schematics that serve as the blueprint for success! The ability to follow directions and ask questions is essential. Key Job Elements: Design and detail mechanical components, as well as revise standard models used in the KJLC product line. Create Bills of Material (BOMs) in the corporate ERP system. Collaborate with Sales and Product Management teams to understand project needs. Interface with our internal machine shop to determine cost-effective manufacturing solutions. Ensure timely compliance with company workplace policies and procedures, including human resource policies and safety guidelines. Perform other duties as assigned. Qualifications: Required: Minimum of one (1) year of experience in mechanical design or related field The ability to follow directions is essential, but we also encourage you to ask questions, explore new ideas, and contribute to our vibrant team Certificate or Degree in Mechanical Design Strong 3D CAD experience Solid knowledge of Geometric Dimensioning and Tolerancing (GD&T) principles Preferred: 2 years of experience with Solid Edge or other mid-range modeling packages Benefits we offer to enhance your lifestyle: On-site Gym and Running Trail Climate Controlled Environment Health & Wellness Programs including mental, physical, and financial (on-site yoga, meditation, seminars, flu shots, biometrics Screening, annual 5K and waste pick up events, etc.) Comprehensive benefits, including medical, dental, vision, life and disability insurances Recycling program, solar panels and electric vehicle plug in station Paid time off 401(k) with employer match Office-wide events Employee recognition programs Ernst & Young LLP - Entrepreneur Of The Year East Central Award to Kurt J. Lesker IV #LI-Onsite Kurt J Lesker Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. KJLC is committed to providing reasonable accommodations for persons with disabilities (unless doing so will result in undue hardship). If you need a reasonable accommodation for any part of the employment process, please send an e-mail to our human resources department at ************* Powered by JazzHR Z504XAdrG3

• Under general supervision, follows general instructions with discretion as to work details. • Develops complete major layout and engineering drawings of complicated components and assemblies such as schematics, interconnect lists, parts breakdown, printed circuit board layouts, wire lists, etc., from notes, rough sketches, or general instructions of engineers and designers. • Makes mathematical calculations as required. • Creates and modifies detailed drawings using CAD hardware and software from sketches, layouts or notes provided by engineering. • Contributes design modifications to facilitate manufacturing operation or quality of product. • Checks drawing plots versus the project input for correctness and conformance to standards. • Works with engineers regarding model accuracy, design, drafting standards and ECN/ECR documentation. • May work with system management including file maintenance, backup and storage. • May provide work leadership to lower level drafters. Minimum Qualifications: • Bachelor's Degree in Electrical Engineering or equivalent educational experience • Drafter designer with minimum of 5 years' experience in mechanical designing. • Demonstrated experience with Solidworks 3D modeling, AutoCad, creating 2D assembly drawings, BOMs, and component drawings. • Ability to design and configure complex systems with limited guidance. • Ability to work independently and consistently meet deadline. • Familiarity with power electronics equipment including switchgear, soft starters and VFDs preferred. • Demonstrated design experience with low voltage packaged solid state starters and VFDs preferred. Desired Skills and Experience: • Experience operating in an electronics manufacturing environment a plus • Strong technical skills related to electrical engineering and power electronics • Excellent communication skills (oral, written, and listening) and the ability to collaborate effectively with diverse group of professionals • Good time-management skills and ability to set priorities • Strong commitment to customer service and teamwork Equal Opportunity Employer/Minorities/Women/Veterans/Disabled *LI

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. The Watts Internship Program is strategically designed to allow you the opportunity to utilize what you have learned in the classroom while gaining a true understanding of the business world by applying those key principles through hands-on experience. During the internship, students will gain exposure to and impact operations. There will be many chances to network with like-minded manufacturing and industrial engineering professionals and stimulate your mind through cross-departmental collaboration. Location: Export Pennsylvania. This role is onsite 5 days a week. What's In It for You People-First Culture - Enriching and caring for people is at the core of who we are; this includes executing our Diversity, Equity, and Inclusion (DEI) strategy, and providing our employees with meaningful career growth opportunities, a positive and safe work environment, and affirmation that they are heard, valued, and respected. Paid Holidays - Celebrate the holidays with your loved ones and still get paid! Where a holiday falls during the weekend, it will be observed on an adjacent weekday. Lunch and Learns - Throughout your internship, there will be opportunities for you to sign up to learn and network with some of the key strategic leaders and thought partners within our core operating model! Sustainability - One of Newsweek's Top 400 of “America's Most Responsible Companies” for sustainability performance, three years running. What You'll Do The Design Engineering Intern will support and assist the ongoing engineering activities. The Design Engineering Intern will use Solidworks and EPDM to improve the searchable database and support various business activities. You will have exposure to the following components during your internship: Production- Making and Packaging Physical Distribution/ Warehouse Quality Health, Safety, and Environment The internship will be approximately 13 weeks, and during your time with Watts, you will focus on the following: Database Management - Assist with managing parts database ensuring information is current and searchable in collaboration with the Engineering Services department. SolidWorks and EPDM - Leverage SolidWorks and EPDM to develop product solutions including design, simulation, and technical service and communication. Partner with Product Engineering - Create 2D and 3D models for stainless steel corrugated hoses and more complex components and assemblies in collaboration with the Product Engineer, Engineering Services, and Manufacturing operations. Operational Excellence, Innovation, and Creativity - Identify and propose refined solutions for business operations, customer, technical, and team goals Get in Front of Leadership - summarize and present what you have learned during your internship to the leadership team Minimum Qualifications Current student (junior or senior status) actively pursuing a bachelor's degree in mechanical engineering or a related engineering degree Must be authorized to work in the United States and do not require sponsorship now or in the future Experience with Solidworks required Experience with EPDM is a plus Experience with FEA is a plus Knowledge of material and manufacturing methods Ability to take initiative and be resourceful Ability to communicate and work with colleagues/teams in different departments professionally and effectively General Applicable Company Competencies Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency. Punctuality and dependability. Ability to be flexible and adapt to changing work priorities and stressful conditions. Adherence to all personnel policies, procedures, and standards of process as implemented by Watts. Maintain productive and collaborative relationships with other Watts employees. Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action. Working Conditions: While performing the job duties, you will be working on-site at a manufacturing facility and will perform the majority of your duties in an office environment. You may, at times, be required to be present on the manufacturing floor and will be required to wear the appropriate personal protective equipment. You will be required to work in the office at the Export location (Monday - Friday). Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Ability to remain seated at a desk or workstation for extended periods. Ability to perform repetitive tasks like typing on a keyboard or using a mouse for extended periods. Ability to physically move around the office, organize or transport files, packages, or other office-related materials. Ability to read documents, use a computer, and perform data entry tasks. Ability to communicate clearly with management and coworkers, particularly in meetings or phone calls. Ability to operate standard office equipment such as computers, printers, phones, and copiers. Ability to occasionally lift and carry light objects, such as office supplies, documents, or small equipment. This position is “at will,” which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. Competitive compensation based on your skills, qualifications and experience Comprehensive medical and dental coverage, retirement benefits Family building benefits, including paid maternity/paternity leave 10 paid holidays and Paid Time Off Continued professional development opportunities and educational reimbursement Additional perks such as fitness reimbursements and employee discount programs Learn more about our benefit offerings here: ********************************* How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

APTIM is pleased to announce an immediate opening for a Project Engineer in our Solid Waste Engineering Group to support our exciting portfolio of projects. This opening is remote or in our California (Concord), Texas (Dallas), Florida (Tampa or Winter Garden), Ohio (Findlay), or Pennsylvania (Pittsburgh) or St. Louis, MO. Our Solid Waste Engineering Group provides the following services to both the public and private sectors: Facility design and permitting Stormwater modeling and management plan development Construction oversight Operations and maintenance Hydrogeologic and geotechnical investigations Environmental compliance audits Our philosophy centers on developing and maintaining a culture of mutual respect and honesty, where people listen generously and speak straight. At APTIM, you can expect countless opportunities to learn, develop business and leadership skills, and engage on a multitude of projects. Key Responsibilities/Accountabilities: Conduct field inspections and construction quality assurance (CQA) oversight Preparing site plans, grading and drainage plans, pump and piping plans, and conceptual layouts for civil earthworks, landfill grading and construction projects Preparing engineering calculations and supporting analyses Perform groundwater, leachate, stormwater and landfill gas sampling and testing Preparing and completing regulatory compliance reports, work plans, and special studies Preparing regulatory compliance reports, work plans, and special studies Utilizing skills and knowledge to solve complex problems Collaborating with other team members Coordinating with contractors and clients Physical work the ability to lift 50 pounds will be required Possess a "Safety First" work ethic Providing other duties as required Basic Qualifications: BS/MS Civil, Environmental, or Mechanical Engineering or equivalent sciences. Possession Engineer in Training (EIT) certification Minimum of 6 years Ability to work on multidisciplinary projects Excellent oral and written communication skills Ability to work in a team environment Self-starter and problem solver Excellent organizational skills Ability to wear proper PPE for work on hazardous waste sites Desired Qualification: Professional Engineer (PE) License Landfill / Solid Waste experience Possession of 40-hour OSHA HAZWOPER training with current 8-hour refresher certificate Knowledge of AutoCAD, HEC-RAS, and ArcGIS software Knowledge of landfill operations and solid waste projects Knowledge of federal and state environmental regulations ABOUT APTIM APTIM is committed to accelerating the transition toward a clean and efficient energy economy, building a sustainable future for our communities and natural world, and creating a more inclusive and equitable environment that celebrates the diversity of our communities. We specialize in environmental, resilience, and sustainability and energy solutions, as well as technical and data solutions, program management, and critical infrastructure. For every challenge our clients face, there is an opportunity for APTIM to innovate a fit-for-purpose solution that will raise your organization or community to a new standard of excellence. What you can expect from APTIM: Work that is worthy of your time and talent Respect and flexibility to live a full life at work and at home Dogged determination to deliver for our clients and communities A voice in making our company better Investment into your personal and professional development As of the date of this posting, a good faith estimate of the current pay range for this position is $80,000 to $130,000 annually. Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM. Employee Benefits Aptim Environmental & Infrastructure, LLC, an extensive range of benefits that protect and promote the health and financial well-being of our employees and their families through the APTIM Benefits Marketplace ************************************ Medical, vision, and dental insurance: Through the marketplace, our employees can choose benefits from five metallic levels and 10+ carriers to find the right benefits that work for them in their location. Life insurance Short-term and long-term disability insurance 401(k) APTIM offers three 401k plans through the Aon Pooled Employer Plan (PEP). The specific plan you are eligible for depends on the business unit you are in. The details of the largest plan are found here: APTIM 2025 401(k) Plan Features (makeityoursource.com) APTIM - Helpful Documents APTIM 2025 401(k) Plan Features Paid holidays, vacation, and sick leave (eligibility based on company policy and applicable law) Watch our video: About APTIM - In Pursuit of Better #LI-ONSITE

Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: Bonus payments every 6 months Rich health plans Retirement planning with our 100% company-paid Employee Stock Ownership Trust If you're mechanically inclined or technically savvy with a passion for cutting-edge technology, we want to hear from you. Position Summary: As an Electrical Manufacturing Engineer I, you will play a key role in enhancing our production capabilities for advanced robotic systems used in the medical and electronics industries. You will focus on designing and implementing automation tools, integrating sensors for data collection, and improving manufacturing processes for PCBs, electronics, and motors to drive efficiency and quality. Essential Functions: Design, develop, and improve manufacturing processes with a primary focus on Printed Circuit Boards (PCBs), electronics assemblies, wiring harnesses, and motors. Develop microcontroller robotic automation tools, and automated test equipment to enhance production efficiency and enable integrating and retrofitting sensors into manufacturing equipment for critical data collection. Assist in the analysis of collected manufacturing data to identify trends and drive process improvements. Collaborate with other engineering groups to provide guidance on Design for Manufacturability (DFM) for new and existing products. Assist troubleshooting and problem-solving efforts in manufacturing departments. Develop clear work instructions and procedures to document proper manufacturing processes. Assist with the physical layouts of manufacturing cells and assembly areas and acquires information and prepares feasibility studies or justifies purchase or building of new equipment Develop training methodology and assist with technical training on new equipment and processes. Additional duties: Assists with physical layout of manufacturing cells and assembly areas Acquires information and prepares feasibility studies for purchasing new equipment Participate in meetings, seminars, and training sessions to stay apprised of new developments in field Confer with workers in other departments such as sales, marketing, engineering and administration to provide technical information and implementation of operating procedures and to resolve system malfunctions As assigned Knowledge, skills, and abilities: Effective verbal and written communication skills Strong analytical and problem-solving skills Ability to define problems, collect data, establish facts, and draw valid conclusions Ability to interpret a variety of technical instructions in mathematical or diagram form Experience with Python or C programming is strongly preferred Familiarity with electrical CAD/ECAD software (e.g. AutoCAD Electrical, Altium, KiCad, SolidWorks) is preferred A basic understanding of database queries (e.g., SQL) is a plus Minimum Qualifications: Bachelor of Science (BS) degree in technical discipline such as Electrical Engineering from an accredited college or university Equivalent combination of education and experience may be considered Must be authorized to work in the United States without employer sponsorship. Aerotech does not provide US work authorization sponsorship for this position. OPT and CPT visa holders are not eligible for employment if they will need work authorization sponsorship at any time in the future. Benefits Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! Competitive compensation Bi-annual bonus Annual raise eligibility UPMC Health Insurance Dental insurance Vision insurance Life insurance Retirement Plan Employee Stock Ownership Trust 401k Paid time off Parental leave Referral program Professional development assistance Tuition reimbursement As an Equal Employment Opportunity/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, Veteran or disability status. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company.

Brayman Construction Corporation is seeking a qualified Project Engineer to join our team for the $769.9 million Montgomery Locks and Dam project, awarded by the U.S. Army Corps of Engineers in Monaca, PA. This major initiative involves removal of the existing lock chamber and constructing a new 110-ft by 600-ft primary lock chamber at the Montgomery Locks and Dam on the Ohio River in Monaca, PA. The work will begin with in-the-wet construction for portions of the lock wall monoliths, followed by cofferdam installation and dry construction of the remaining monoliths. Deconstruction of the existing auxiliary lock chamber will start in Spring 2025, with project completion anticipated in 2030. This vital infrastructure project is part of the larger Upper Ohio Navigation Project, designed to upgrade aging lock systems and ensure safe, efficient navigation along the Ohio River. Join us and contribute to a project that will impact regional commerce and enhance navigation on the Ohio River for decades to come! This position earns a competitive salary and excellent benefits, including low-cost medical/dental/vision insurance, 401(k) with company match, generous profit sharing and performance bonuses, paid time off, and paid holidays. JOB SUMMARY The Project Engineer will be responsible for assisting the Project Manager and Superintendent in overseeing geotechnical construction projects, which would include contract management, change order preparation, project schedule updating, vendor/supplier management, quantity tracking, production analysis, progress billing quantities/construction units for invoice preparation, resource allocation and coordination, estimating, and material pricing/project buyout. SUMMARY OF PROJECT ENGINEER RESPONSIBILITIES * Manage project takeoffs and documentation * Prepare project proposals * Obtain quotes from suppliers * Develop strong relationships with: customers, vendors, subcontractors, quality control personnel, operations, and management staff * Use exceptional organizational skills for effective project management * Leverage interpersonal and communication skills for successful task completion REQUIRED SKILLS AND ABILITIES * 3-5 years of Project Engineering experience * Ability to read and interpret blueprints and plans * Strong analytical and problem-solving skills * Proficient with Microsoft Office Suite or related software (particularly Excel) * Excellent organizational skills and attention to detail * Excellent time management skills with a proven ability to meet deadlines * Ability to be flexible and quickly adapt to new challenges * Must be willing and able to travel or relocate as necessary for projects REQUIRED EDUCATION AND EXPERIENCE * Bachelor's Degree in a related field, which may include Civil Engineering, Construction Management, or Business Management or the equivalent experience in the construction industry. * Completion of at least one internship with a heavy civil, foundation, or steel erection contractor or equivalent work experience. * Experience with various types of heavy civil or foundation work including, but not limited to, mass concrete, post-tensioning, dams, drilling, soil nails, caissons, tie backs, shotcrete, slurry walls is preferred. For a complete and list of responsibilities, please visit our career page at ************************************** ABOUT BRAYMAN We are a leading heavy civil and geotechnical contractor with office headquarters in suburban Pittsburgh, Pennsylvania. Incorporated in 1947 as a family-owned business, Brayman has grown, diversified and evolved its construction services from a small bridge and concrete company to a large, nationally recognized provider of complex, heavy civil and geotechnical construction projects servicing both public and private sector clients. SAFETY SENSITIVE POSITION This is a Safety Sensitive Position requiring work on project sites, including federal projects. This position may require working at heights, in confined spaces, around heavy equipment, around high voltage, and under constantly changing circumstances. This position will be subject to more stringent drug testing and compliance policies associated with our status as a federal contractor. SPECIAL NOTE This is presented as guidance only. Other reasonable tasks or responsibilities as management sees necessary may be added to this job description in order to achieve satisfactory job performance by the team member. EEO STATEMENT Brayman and Affiliate Companies are Equal Opportunity Employers. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, veteran status, or on any other characteristic protected by law. CONFIDENTIALITY Some positions with the company will have access to confidential and proprietary information. Successful candidates for those positions will be required to sign our standard confidentiality agreement as a condition of employment. Location: 15061

Job Description Sargent Electric Company (************************ - Consistently named one of the Top Fastest Growing Companies. Also, Awarded Safety recognition by Specialty Trades Insurance Company for the large company bracket and The Association of Union Constructors ! Established in 1907, Sargent Electric Company has since evolved into one of the largest electrical contracting companies in the area, providing comprehensive services to our clients. We are looking for an experienced PROJECT ENGINEER based out of our Pittsburgh, PA office. The primary function of this position is to provide the overall technical oversight of engineering scopes for EPC or Design-Build projects with challenging schedule milestones. This role helps our customers define and hone solutions for their projects to provide winning solutions for our customers and for Sargent. Helping our customers optimize their projects through creative, value engineering solutions and working around supply chain obstacles is a key part of the role. The projects may include small, fast track projects or major projects up to $100MM. This position may also be involved in troubleshooting electrical projects or providing commissioning support for the Owner. The position will work with multiple business units and project managers on assigned projects and may oversee multiple projects in various stages of development. The position requires periodic travel to job sites nationwide and periodic short term on-site assignments. RESPONSIBILITIES: Providing engineering solutions that support our customers' technology solutions and provide cost effective, constructable designs. Delivers designs that support safe delivery of our projects and safe solutions for our customers when energized. Responsible for implementing and executing the overall direction, coordination, and evaluation of our engineering activities and solutions in coordination with the Project Management and Field Management Team Assure that our subcontractors provide quality project teams and the appropriate, experienced talent to provide a safe, high quality design. Establish project objectives and performance standards as defined by the Company's operating policies and procedures and the project turnover process. Support the project proposal effort and support the estimating needs where required. Often the engineering manager will be an integral part of the proposal process identifying the critical equipment, materials specifications and technical solutions to meet our customers' requirements. Support sales efforts through meetings with our customers, site visits, vendor shops, and other operating units to determine best solutions for our new projects. Assists in defining engineering requirements, selecting engineering companies based on company qualifications and experience, resource availability, workload / backlog, project understanding, cost, and references. Have a complete understanding of all plans, contract, and specification requirements to ensure the Company's interests are always protected, specific contractual obligations are adhered to and all work is completed accordingly. Participate in the development of all project schedules, budgets and other project related reports. Ensure their accuracy and that any required updates are done in a timely manner. Support the procurement processes of EPC projects by working directly with our engineers and vendors to establish the most economical solutions, and maintain schedules while urgently addressing all critical path items Maintain a strong working relationship with the client, owner, engineer, vendors, suppliers and other project related firms and personnel to minimize conflicts and maximize the outcomes of all project activities. Support the Company's strategic planning initiatives and follow through with any assigned responsibilities to ensure success. Seek out and participate in self-improvement, leadership development skill programs to further enhance individual effectiveness, achievements and outcomes. Play a key role in promoting the importance of client satisfaction and its relationship to the Company's reputation and its ability to obtain new and repeat business. SKILLS: Excellent written communication skills. Proficient with computers, particularly Microsoft Office applications, including the ability to type. Strong interpersonal and communication skills and the ability to effectively communicate with a wide range of diverse individuals. Works efficiently under tight time frames, responds to requests in a timely manner, and communicates effectively as a team player. Understands the importance of being able to multi-task. -------------------------------------------------------- BASIC QUALIFICATIONS: A four-year electrical engineering degree or construction management degree or equivalent is preferred. 5-8 years of related experience may be substituted. (EIT or PE preferred) Ability to not only comprehend but also to provide input on single-line diagrams, wiring diagrams, schematics, protection & control, fuse coordination, and outage planning, general arrangements, elevation drawings, bus designs/calculations, and below grade/raceway design. A demonstrated knowledge of studies including but not limited to lightning, lighting, grounding, insulation coordination, short circuit, load flow, arc flash, protection coordination, and relay settings. A demonstrated knowledge of complex multi-discipline packages and coordinating multi-discipline packages - civil, foundations, structural steel, pre- engineered buildings, HVAC, mechanical and piping, insulation, electrical, instrumentation, telecommunications, life safety systems and other specialty systems. Experience in the energy projects including utility and power design ranging from low voltage to extra high voltage (LV,MV,HV,EHV), AC design, DC design, transmission/distribution/collection, renewable energy, solar, battery storage, wind and natural gas projects is a strong plus. Sargent Electric Company and all its affiliate companies are committed to providing equal employment opportunities in all aspects of employment to qualified individuals without regard to the following criteria: race, color, national origin, religion, sex, pregnancy, sexual orientation, gender identity or expression, mental or physical disability, age, familial or marital status, ancestry, military status, veteran status or genetic information as well as any other prohibited criteria under any local, state or federal law applicable to Sargent Electric Company. Powered by JazzHR hZiF6Mbis8

Overview & Responsibilities Purpose of the Job: The position of Manufacturing Engineer exists to provide a technical liaison between Manufacturing, Engineering, and Quality Assurance. The position identifies coordinates, and implements, activities with all functional areas that contribute to new, improved or more efficient technologies, processes, and product designs. The incumbent will assist in preparing for new manufacturing technology and complicated technical systems and provide the necessary skills for successful completion of capital projects. The position provides technical liaison between manufacturing and engineering to ensure a design to cost approach and manufacturability of components parts within the ISO quality requirements. This position also monitors and analyzes productivity for improved machining operations. Primary Job Functions: Provides technical liaison between Manufacturing and Engineering. Issues instructions on new, improved methods of manufacture. Reviews designs for manufacturability, quality, and low cost. Actively participates in cost reduction activities seeking to lower manufacturing costs. Recommend process changes to reduce lead time and cost. Supports product design by providing the necessary inputs relative to manufacturing methods and manufacturability. Analyzes complex bill of material structure. Interprets Engineering instructions and drawings, translating into manufacturing operations and routing sequences. Process route sheets for daily demand, ECC's, NCR's and emergency shop requests. Works independently to manage route sheet backlog, by prioritizing tasks at hand. Develops routings for a wide variety of component parts and assemblies, focusing on best practice. Re-write routings when necessary based solely on machine tool availabilities. Works closely with and provides input to CAD / CAM Technicians on optimal routing sequence, fixturing, tools selection, cutting speeds, etc. to aid in CNC program development. Understanding of CNC machine basic code is required. Strong understanding of tooling specifications including proper selection, cutting speeds, material removal rates, etc. Assists in tooling requests, recommending and approving tool fixtures and design. Ability to identify and implement lean machining practices. Assists Machinists in running first pass processing of new items. Critical to programming, setup and inspection tooling for Bearing Department related parts. Interacts with Machinists on a daily basis for technical support. Ability to work with a design team to establish new methods for automated programming. Documenting detailed work instructions. Issues instructions on new, improved methods of manufacture. Determine proper machinery needs for future growth. Aide in development of automated machining processes. Ability to lead the deployment of capital projects by outlining and selecting machinery needs and requirements. As well as the ability to guide the installation process by providing inputs on foundations, layouts, workflows, needs, and peripherals Primary technical interface relative to manufacturing processes. Coordinates efforts to review scrap and rework data to eliminate root cause. Fills in for Shop Supervisor when required. Participates actively in company Quality Improvement Programs. Trains and assist other personnel in accomplishing specific tasks. Travels as required by job to review vendors and processes. Assists with evaluating and determining all bearing repairs. Contact with Others: Internally the job requires contact with most levels of personnel of a wide variety of departments, including Operators, Production Control, Engineering, etc. Externally some vendor contacts are required, as well as technical contacts with associated plants and other corporate units. Travel is very limited. Requirements / Qualifications: Educational requirements include a Bachelor's Degree in Manufacturing Engineering, Manufacturing Technology, CNC Machining Automation, related field, or equivalent experience. Training in Problem Solving and Decision Analysis is essential. Job experience must include at least 10 years in a manufacturing and assembly environment with progressive responsibilities. Experience with multi-axis/mill turn machine tools is desired. Technical skills must include in-depth knowledge of Manufacturing Processes, State-of-the-art Machining, Assembly, Manufacturing Techniques and Tool Design. Additional skills required would include a working knowledge of CAD, CAM, and related systems, non-traditional machining processes, welding, balancing, and inspection techniques. Foundry experience and/or Babbitt applications is a plus. Equal Employment Opportunity Ebara Elliott Energy is an equal employment opportunity/affirmative action employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, marital status, genetic information, disability, veteran status, or any other characteristic protected by the federal, state or local laws of the United States. Applicants and employees are protected under U.S. federal law from discrimination. To learn more, click here . To learn more about our Job Applicant Privacy Notice, please click here . No agency submissions please. NOTE: Resumes submitted to any Ebara Elliott Energy employee without a current, signed and valid contract in place with the Ebara Elliott Energy recruiting team will become the property of Ebara Elliott Energy and no search fees will be paid.

Job DescriptionDescriptionFS-Elliott is looking to add an Applications Engineer to our team! In this role you provided technical support to the Sales team during proposal phases, review and respond to Customer specifications, and assist in the development of quotations for equipment package orders. Key Responsibilities Prepare firm or budgetary equipment quotations in a timely manner to meet Customer specified timelines. Select aerodynamic performance for a given application based on site requirements, customer specifications and FSE capabilities. Research existing product specifications to assist Customer Service for aftermarket product support. Select and configure options from price books to develop product proposals. Estimate non-price book items based on the overall requirements and research into the price of materials and estimates of other costs. Interface with internal groups to understand factory capabilities and costs. Prepare RFQ's for supplier components and condition vendor quotes with assistance from the Purchasing group Provide input to Product Management on product features, sales tools and processes to optimize efficiency. Coordinate custom generation of Unit Outlines, P&IDs, ITPs and Documentation Submittals for engineered unit quotation. Attends Customer bid clarification and kick off meetings when required. Provides all necessary technical clarifications as well as support commercial clarifications during the bid clarification phase. Consults the sales lead regarding the specifications and features of an application or a set of integrated applications. Alternately, these training sessions can be conducted directly for the end users to explain the features and advantages of an application. Prepares and executes the completion of order entry documents Performs other related duties as assigned by management. Skills, Knowledge and Experience Firm commitment to excellence and high standards Excellent verbal and written communications skills including ability to listen attentively and to communicate information clearly and effectively Interpersonal savvy; able to collaborate and work closely with other departments and leadership Excellent problem solving, process analysis, and improving business practice skills Outstanding time-management skills with proven ability to manage multiple projects at a time while meeting deadlines Good judgement skills with the ability to make timely and sound decisions Detail oriented and highly organized with the ability to prioritize duties and responsibilities Self-motivated, resourceful and adaptable; able to work independently within team focused environment Bachelors Degree in Engineering, or equivalent education and experience developing technical proposals. Proficient with Microsoft Office 365 software; ERP experience preferred

We are looking for a Manufacturing Engineer to join our Pittsburgh (Cheswick) location. Your Responsibilities: Under general supervision, assists in the design, integration, or improvement of manufacturing systems or related processes. Works with others to develop efficient systems, processes and tooling that result in high-quality products which conform to customer requirements. Understands capabilities for each production process and product available. Recommends improvements to manufacturing processes for maximum efficiency, cost-effectiveness, and quality. We Take Care of Our People: Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Your Challenge: Performs simple operational or methods analyses regarding manufacturing process flow and work instruction. Assists with operational or methods analyses related to labor standards for use in conducting manufacturing operations. Assist in the evaluation of engineering changes and/or other specifications requirements. May interface with design engineering in coordinating the release of new or existing products and conduct reviews of engineering drawings prior to release. Plans, coordinates, and executes, with guidance, simple manufacturing engineering activities such as routine operational or methods analyses related to labor standards, reviews product/project flow data, tooling, equipment, and labor requirements for use in conducting manufacturing operations to increase productivity and reduce production unit cost. Documents, reports, publishes, and make technical or other presentations. Under direction, assists with the design of experiments, data collection and interpretation, and analyses supporting investigations related to simple problem resolution. Maintains manufacturing standard procedures, which defines specific manufacturing processes. Writes analysis and test reports. Acts as technical liaison with other personnel such as design, quality, procurement, inspection, and production in project team or technical meetings. Participate in project team or technical team meetings by active listening and asking questions. Maintains records and reporting systems for coordination of manufacturing operations. What You Bring: Bachelor of Science in Mechanical or Manufacturing Engineering 3 years experience GD&T Ability to create models and drawings, present design reviews, and perform trade studies and design reviews. Capable of coordinating multiple project responsibilities. Must be a team player and have knowledge of MS Office Suite. Ability to perform analysis and studies with strong attention to details in a fast-paced environment. Due to DoD requirements, candidates must be US citizens. Must be able to obtain and maintain DOD security clearance. Who we are: Our Values Environmental, Social and Governance EMD a business unit of Curtiss-Wright in Cheswick, PA designs, manufactures, tests, and provides after-market support for the most advanced, proven and reliable critical function pumps, motors, generators, seals, control rod drive mechanisms and power conditioning electronics available anywhere in the world today. Curtiss-Wright EMD has a long-standing and distinguished reputation for the design, development, manufacture, and qualification of critical-function machining solutions for the United States Navy and the commercial nuclear utility industry. At this facility we have a flexible work schedule - Work from home (1 to 2 days) OR 9/80 schedule. #LI-KH1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Are you passionate about mechanical design and innovation? Do you thrive in a collaborative environment where your expertise can make a real impact? Look no further! We're seeking a talented Mechanical Designer to join our dynamic team. The Kurt J. Lesker Company is a dynamic, rapidly growing international manufacturer and distributor of thin film deposition systems and components for the vacuum technology market. Our products are used in a variety of applications including semiconductor, space exploration, automotive, solar, medical devices, and several other world-changing technologies. We pride ourselves on our strong team culture and dedication to sustainability, which has enabled us to continue to innovate and expand year after year. As a privately held company, we are able to focus on the long term and invest in the future, which has allowed us to stay at the cutting edge while providing stability and growth for our employees for the last 70 years. Join us and be a part of something truly special. Overview of Responsibilities: As a Mechanical Designer, you'll lead the charge in creating cutting-edge mechanical components based on standard products. Your designs will drive innovation, elevate our product offerings, and breathe new life into existing products. Whether optimizing performance, enhancing functionality, or adapting for new projects, your creativity will shine. Your meticulous attention to detail will produce schematics that serve as the blueprint for success! The ability to follow directions and ask questions is essential. Key Job Elements: Design and detail mechanical components, as well as revise standard models used in the KJLC product line. Create Bills of Material (BOMs) in the corporate ERP system. Collaborate with Sales and Product Management teams to understand project needs. Interface with our internal machine shop to determine cost-effective manufacturing solutions. Ensure timely compliance with company workplace policies and procedures, including human resource policies and safety guidelines. Perform other duties as assigned. Qualifications: Required: Minimum of one (1) year of experience in mechanical design or related field The ability to follow directions is essential, but we also encourage you to ask questions, explore new ideas, and contribute to our vibrant team Certificate or Degree in Mechanical Design Strong 3D CAD experience Solid knowledge of Geometric Dimensioning and Tolerancing (GD&T) principles Preferred: 2 years of experience with Solid Edge or other mid-range modeling packages Benefits we offer to enhance your lifestyle: On-site Gym and Running Trail Climate Controlled Environment Health & Wellness Programs including mental, physical, and financial (on-site yoga, meditation, seminars, flu shots, biometrics Screening, annual 5K and waste pick up events, etc.) Comprehensive benefits, including medical, dental, vision, life and disability insurances Recycling program, solar panels and electric vehicle plug in station Paid time off 401(k) with employer match Office-wide events Employee recognition programs Ernst & Young LLP - Entrepreneur Of The Year East Central Award to Kurt J. Lesker IV #LI-Onsite Kurt J Lesker Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. KJLC is committed to providing reasonable accommodations for persons with disabilities (unless doing so will result in undue hardship). If you need a reasonable accommodation for any part of the employment process, please send an e-mail to our human resources department at [email protected]

Brayman Construction Corporation is seeking a qualified Project Engineer to join our team for the $769.9 million Montgomery Locks and Dam project, awarded by the U.S. Army Corps of Engineers in Monaca, PA. This major initiative involves removal of the existing lock chamber and constructing a new 110-ft by 600-ft primary lock chamber at the Montgomery Locks and Dam on the Ohio River in Monaca, PA. The work will begin with in-the-wet construction for portions of the lock wall monoliths, followed by cofferdam installation and dry construction of the remaining monoliths. Deconstruction of the existing auxiliary lock chamber will start in Spring 2025, with project completion anticipated in 2030. This vital infrastructure project is part of the larger Upper Ohio Navigation Project, designed to upgrade aging lock systems and ensure safe, efficient navigation along the Ohio River. Join us and contribute to a project that will impact regional commerce and enhance navigation on the Ohio River for decades to come! This position earns a competitive salary and excellent benefits, including low-cost medical/dental/vision insurance, 401(k) with company match, generous profit sharing and performance bonuses, paid time off, and paid holidays. JOB SUMMARY The Project Engineer will be responsible for assisting the Project Manager and Superintendent in overseeing geotechnical construction projects, which would include contract management, change order preparation, project schedule updating, vendor/supplier management, quantity tracking, production analysis, progress billing quantities/construction units for invoice preparation, resource allocation and coordination, estimating, and material pricing/project buyout. SUMMARY OF PROJECT ENGINEER RESPONSIBILITIES Manage project takeoffs and documentation Prepare project proposals Obtain quotes from suppliers Develop strong relationships with: customers, vendors, subcontractors, quality control personnel, operations, and management staff Use exceptional organizational skills for effective project management Leverage interpersonal and communication skills for successful task completion REQUIRED SKILLS AND ABILITIES 3-5 years of Project Engineering experience Ability to read and interpret blueprints and plans Strong analytical and problem-solving skills Proficient with Microsoft Office Suite or related software (particularly Excel) Excellent organizational skills and attention to detail Excellent time management skills with a proven ability to meet deadlines Ability to be flexible and quickly adapt to new challenges Must be willing and able to travel or relocate as necessary for projects REQUIRED EDUCATION AND EXPERIENCE Bachelor's Degree in a related field, which may include Civil Engineering, Construction Management, or Business Management or the equivalent experience in the construction industry. Completion of at least one internship with a heavy civil, foundation, or steel erection contractor or equivalent work experience. Experience with various types of heavy civil or foundation work including, but not limited to, mass concrete, post-tensioning, dams, drilling, soil nails, caissons, tie backs, shotcrete, slurry walls is preferred. For a complete and list of responsibilities, please visit our career page at ************************************** ABOUT BRAYMAN We are a leading heavy civil and geotechnical contractor with office headquarters in suburban Pittsburgh, Pennsylvania. Incorporated in 1947 as a family-owned business, Brayman has grown, diversified and evolved its construction services from a small bridge and concrete company to a large, nationally recognized provider of complex, heavy civil and geotechnical construction projects servicing both public and private sector clients. SAFETY SENSITIVE POSITION This is a Safety Sensitive Position requiring work on project sites, including federal projects. This position may require working at heights, in confined spaces, around heavy equipment, around high voltage, and under constantly changing circumstances. This position will be subject to more stringent drug testing and compliance policies associated with our status as a federal contractor. SPECIAL NOTE This is presented as guidance only. Other reasonable tasks or responsibilities as management sees necessary may be added to this job description in order to achieve satisfactory job performance by the team member. EEO STATEMENT Brayman and Affiliate Companies are Equal Opportunity Employers. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, veteran status, or on any other characteristic protected by law. CONFIDENTIALITY Some positions with the company will have access to confidential and proprietary information. Successful candidates for those positions will be required to sign our standard confidentiality agreement as a condition of employment. Location: 15061 Job Posted by ApplicantPro