Diesel mechanic jobs in Morris, NJ - 573 jobs

As a Mechanic , you will work with your team to service and repair all fleet vehicles. Please make an application promptly if you are a good match for this role due to high levels of interest. Shift: 2 pm - 10 pm, M - F, slightly flexible Responsibilities: Perform preventive maintenance and repairs on all company vehicle types per company policy. Diagnose and repair mechanical, electrical, and HVAC systems. Document all vehicle repair and inspection information using our maintenance software program. Perform inventory and order parts, supplies, as needed. Maintain a clean and safe work environment per company standards. Performance Requirements: Required operational knowledge of diesel equipment and tools normally associated with the troubleshooting and repairs of gasoline and diesel truck equipment. Knowledge of International diesel medium-duty trucks as well as Ford gas and diesel engines is preferred. Must be able to accurately perform preventive maintenance to fleet vehicles, have the ability to identify component failures, worn or damaged parts, diagnose and troubleshoot vehicle systems, and produce quality repairs. Ability to read and understand technical service manuals, repair orders, labels, and gauges. Must possess a valid driver's license (C or better) and meet qualifications as outlined in section 391 of the Federal Motor Carrier Safety regulations. Unrestricted ability to walk, stand, bend, stoop, squat, lift (up to 50 lbs.), push, pull, climb, and lie on back in a horizontal position for prolonged periods of time. Ability to communicate verbally using telephone for ordering parts and supplies as need. Ability to hoist any size vehicle with lift device (vehicle jack) using foot and arm pumping motion. Work is performed in a heated enclosed structure. Environment involves chemical handling, gasoline/diesel fumes and intermittent high noise exposure. Full-time schedule consists of a minimum 40-hour work week. Must meet DOT standards to achieve brake and annual inspection certifications. A minimum of 1 year experience or a certificate from an approved training program. Basic hand tools required. ASE or manufacture certification is a plus. As part of the qualification process for the Mechanic position, a Human Performance Evaluation (HPE) is required. This evaluation requires successful completion of testing in the following areas: * Lift: - 25lbs vertical lift from 10 inches to 66 inches from the floor (1X) Lift-Carry: - 8lbs vertical lift from 1 inch to 44 inches from the floor, and horizontally transfer 15ft (4X) -18lbs vertical lift from 10 inches to 36 inches from the floor and horizontally transfer 300ft (1X) -50lbs vertical lift from 10 inches to 36 inches from the floor and horizontally transfer 2ft (2X) Push-Pull: - Horizontally transfer 47lbs of force on a sled (single, non-dominant arm), a distance of 1ft (2X) Repetitive Coupling: - Squeeze Jamar Hand Dynamometer requiring forces up to 30lbs / both right & left hands (4X each) Benefits: Loomis offers one of the most comprehensive employees benefit packages in the industry, which includes: Vacation and Sick Time (PTO) as well as Paid Holidays Health & Dental Insurance Vision Insurance 401(k) Plan Basic Life Insurance Plan Voluntary Life Insurance Plan Flexible Spending and Health Savings Account Dependent Care Account Industry leading Training and Development Loomis is an Equal Opportunity Employer and Drug Free Workplace. xevrcyc Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.

A leading automotive company in Woodcliff Lake, NJ is seeking a Technical Instructor/Developer to build and maintain technical training curriculums. The role requires an associate degree in automotive technology with at least 5 years of experience, or a bachelor's degree in engineering with 7+ years of relevant experience. Candidates will develop training materials, deliver programs, and assess training effectiveness. Expect competitive benefits, including medical insurance, a retirement plan, and generous PTO. #J-18808-Ljbffr

Bridgestone Retail Operations (BSRO) is part of Bridgestone Americas and employs over 22,000 teammates in North America. BSRO operates more than 2,200 company-owned stores, including Firestone Complete Auto Care, Tires Plus and Wheel Works locations. With locations across North America and more than $4.5 billion in tire and auto service sales, Bridgestone Retail Operations is the right place to build a career. Whatever role you fill, when you represent the Bridgestone name, you are a valued teammate, and part of our larger mission to Serve Society with Superior Quality. We start by offering each teammate more than just competitive pay. We provide formal training, performance incentives, paid vacation and holidays, competitive healthcare packages for full-time and part-time employees, and a 401k plan to help build towards your future. We believe people can only provide superior service and quality to others when they are allowed to bring their whole self to work and know they are supported. We believe in championing all perspectives, individuals and teams because we understand the importance of seeing the world and our business through many different lenses. We are building a team as diverse as the world we serve. So, show us what you are made of. Show us the smart stuff, the tough stuff, the bold, beautiful and brave stuff. Because who you are is what we need. **Job Category** Retail **Position Summary** The Automotive Technician plays a pivotal role within our automotive service team. As a vital member, you learn and develop foundational skills in diagnosing, repairing, and maintaining vehicles. Under the guidance of experienced technicians, this role involves hands-on learning to address various automotive systems and services. Automotive Technicians participate in routine inspections, contribute to vehicle assessments, and assist in repair procedures. Additionally, Automotive Technicians may interact with customers to explain repair procedures, answer inquiries, and provide exceptional service. Overall, this role demands a combination of mechanical aptitude, attention to detail, and a commitment to delivering high-quality workmanship in a fast-paced environment. This role offers a unique opportunity for individuals to build a solid foundation in automotive repair while contributing to the overall success of our team. Pay Range: $20.40 - $30.60 Our technicians enjoy a performance-based compensation model known as flat-rate pay. This system rewards our skilled professionals with a predetermined amount for each eligible task, fostering a culture of efficiency and swift task accomplishment, ensuring you're fairly rewarded for your expertise and dedication. These rates reflect average productivity by region. **Responsibilities** + Change oil and perform other scheduled maintenance services. + Perform inspections of steering, suspension, and brake systems. + Install batteries and check electrical systems. + Perform tire maintenance. + Install parts. + Road test vehicles. + Obtain or maintain A.S.E. certifications in at least one of A1 - A8 within first two years of employment (Tests and registrations fees are paid for by company pass or fail. Technicians receive bonus for each test passed) **Minimum Qualifications** + Ability to learn basic mechanical tasks. + Must have a valid automobile driver's license at all times and be able to drive customer and company vehicles. + Basic understanding of general automotive maintenance & tire repair services including: + Oil changes + Basic inspections + Repairing tires + Reading, writing, and math skills. **Preferred Qualifications** + 2 years of automotive repair experience, completion of Vocational-Technical School program in a related field or demonstrated skills via third party certificates/assessment. + A.S.E certification or equivalent external qualifications or training certifications. **OUR CREW KNOWS** **BENEFITS** + Medical, Dental and Vision - Starting day 1 for all our teammates + Paid vacation and holidays + On-the-job training and company-funded ASE certifications + Flexible work schedule + 401(k) match + On demand pay (daily pay) program available **OUR VALUES GIVE BACK TO** **YOU** + Professional Development: No matter where you're at in your career, we've got the resources to help you level up. + Community Involvement: We pride ourselves on working with our local communities and giving back where we can. + Integrity & Teamwork: Part of what makes our teams different is our drive to do things right, always, together. **At Bridgestone, you are Free to Be** We believe people can only provide superior service and quality to others when they bring their whole self to work. We believe in championing all perspectives, individuals and teams because we understand the importance of seeing the world and our business through many different lenses. We are building a team as diverse as the world we serve. So, show us what you are made of, because who you are is what we need. **What we offer** At Bridgestone, what really matters is to foster co-creation opportunities and empowering you to be creative and curious to make mobility safer, more efficient, and more sustainable for future generations. Whatever role you fill, when you represent Bridgestone, you are a valued teammate, and part of our larger mission to "Serve Society with Superior Quality", for that, we offer you more than just a competitive compensation; we will provide you: + A supportive and engaging onboarding experience to ensure a smooth transition into our team. + The opportunity to develop and grow, through training and regular mentorship. + Corporate Social Responsibility activities. + A truly global, dynamic and challenging work environment. + Agility and work/life effectiveness and your long-term well-being. + A diverse and inclusive team. _Bridgestone is proud to be an Equal Employment Opportunity employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state or local law._ **Employment Eligibility** If hired, a Form I-9 Employment Eligibility Verification must be completed at the start of employment. Temporary work authorization or the need for sponsorship may disqualify you from employment.

**Before you apply to a job, select your language preference from the options available at the top right of this page.** Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. **Job Description:** Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel and gasoline. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. **Responsibilities and Duties** + Meets D.O.T requirements required by job assignment + Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday + Sits infrequently, as required, throughout duration of workday + Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks + Operates standard and manual transmission + Operates power and pneumatic tools **Requirements** + Must have an active driver's license issued by the state + Must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. + Must possess the required hand tools required to perform the applicable job assignment. **Knowledge and Skills** + Current documented automotive mechanical experience + Experience using diagnostic equipment, scan tools and personal computer + Possesses full complement of personal hand tools + Class A/Bor A Commercial Driver's License (CDL) - **Preferred** + NJ State Inspection License - **Preferred** + Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis + Available to work varying shifts, additional hours and/or overtime depending on service needs + Wears personal protective equipment as required + Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. + Works cooperatively in a diverse work environment + Communicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions **Employee Type:** Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. **Other Criteria:** UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. **Basic Qualifications:** Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer. **Pay Range:** For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $39.89/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

As our Maintenance Mechanic you are are to maintain and repair plant equipment to ensure safe and reliable operations while maximizing Overall Equipment Effectiveness (OEE). Solving challenges is the very foundation of who we are. After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint. When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry. Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: * Repair and maintain machinery and equipment including: pumps, motors, filling and packaging equipment, conveyors, palletizers, piping, valves, tanks, agitators, drives, gearboxes, and utilities. * Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. * Perform inspections and preventive maintenance to ensure compliance with safety and regulatory requirements as well as to ensure equipment reliability. * Work with filling line operators to efficiently change over line equipment for different label, container, and packaging sizes. * Improve OEE (Overall Equipment Effectiveness) on the filling lines by Pareto analysis of OEE data and implementation of Lean Manufacturing tools to reduce downtime. * Maintain all operating equipment in satisfactory condition. Schedule needed repairs to have minimum interference with operations. Troubleshoot/repair equipment in a timely and efficient manner. * Comply with company safety rules and procedures. Complete daily and shift clean up tasks. * Communicate results/ concerns/ issues with supervisor and co-workers. Ensure shift to shift hand-off is complete. * Support and complete small capital projects. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Required Experience: * 3+ years of maintenance experience in manufacturing environment; preferably in chemical/paint manufacturing * High School Diploma or equivalent * Must have expertise in packaging equipment, plumbing, and pipefitting, with skills in electrical work and instrument calibration considered a definite plus * Demonstrated ability to diagnose and troubleshoot complex packaging and material-handling equipment is required * Ability to do basic math. * Accurately enter and retrieve computer data. * Ability to operate machinery * Ability to solve problems in a team environment. * Active participation in our Continuous Improvement Process. * Ability to consistently lift 50 pounds. * Willing to work overtime as required.

Job Description MECHANICS NEEDED - $1,000 signing bonus for forklift mechanics certified on competitive equipment! We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 1-year experience. We Service NY, NJ & Eastern PA Founded in 1977, C&C Lift Truck , Inc. has continuously grown over the last 42 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience level Forklift Mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment. C&C Offers: Union Pension Plan Medical, Dental, Vision benefits available Vacation Time Retirement Plan Opportunities Overtime Opportunities Competitive wages Supplemental Pay (bonus pay, commission pay, signing bonus) Referral bonus program Compensation: $18 - $32 / hour Primary Responsibilities: Job will require IC and Electric truck repairs Complete scheduled PM and repair assignments within the time frame allotted Track van inventory to meet PM schedule Perform routine forklift maintenance Use diagnostic tools to test forklift components Perform quality inspections Skills Required: The ability to work in all types of weather conditions The ability to stand and walk for long periods of time Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job Employee must be able to communicate effectively with management, customers, and other employees Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks Employee must be able to analyze information and write a diagnosis on work orders The ability to decipher different colors Must be able to work individually and as a team Qualifications: Prefer 1 or more years' experience as a heavy equipment mechanic or related mechanic jobs Valid Driver's license with a good driving record Strong mechanical aptitude and troubleshooting skills Deadline and detail-oriented Valid Driver's license with a good driving record Ability to lift 50 lbs. Willingness to learn Ability to thrive in a fast-paced environment Schedule: Monday - Friday, 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to submit to drug screening and motor vehicle background checks. We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Start Time: 6:30 AM End Time: 3:00 PM Mechanic In Training - Water/Wastewater Treatment Facility At , we challenge what is currently accepted, so we can shape innovative and lasting solutions for tomorrow. Through the delivery of our operations and maintenance services, youll make it simpler and more seamless for our municipal clients to operate safely and efficiently, empowering communities to focus on what matters most to them people. As a Mechanic-in-Training, youll join a collaborative team ensuring that our clients can deliver their services uninterrupted. Based at the North Hudson Sewerage Authority in Hoboken, New Jersey, youll have the opportunity to perform a variety of tasks in the preventive and corrective maintenance on water/wastewater treatment plants and related facilities equipment on an assigned shift. Youll contribute to the success of our program with efficient preventive maintenance and effective solutions to challenges that may arise in municipal facilities. Youll perform preventive and corrective maintenance on buildings, structures, grounds, machinery and equipment; lubricate equipment and check for malfunctions; replace packing in pumps or valves; replace bearings in motors, pumps, and other equipment; tune engines, set valve clearance, clean, and adjust regulators; examine equipment failures to identify cause and to prevent recurrences; and install and sets up new equipment. Youll also clean and paint interior and exterior equipment and buildings; lean out pipes and perform other plumbing and pipe fitting tasks as required; use gas and/or arc welding equipment to heat, cut, braze, or weld; perform duties of painter in their absence; assist in keeping maintenance records; and perform other duties as required. Most importantly, youlltake actionto ensure the safety, health and well-being of you and your team. Here\'s What You\'ll Need: A valid drivers license with no major infractions Ideally, Youll Also Have: Experience in the maintenance of wastewater treatment plants and related equipment, or similar maintenance experience A valid Certified Maintenance & Reliability Technician (CMRT) certification or ability to obtain within 3 years of date of hire Experience in the use of Computerized Maintenance Management Systems (CMMS) Forklift experience Experience in serving municipal utility client Safe work practices Working Conditions & Physical Requirements: Safety is a core value at . We are committed to providing a safe and healthy workplace for all employees. This position will spend a substantial amount of time performing safety sensitive labor or services. Responsibilities: Comments/Special Instructions Candidate will work Monday-Friday 630-3PM (1/2 hr lunch and 15 min AM & PM break); once trained, will be required to be on the on-call rotating schedule and work overtime when required.

As our Maintenance Mechanic you are are to maintain and repair plant equipment to ensure safe and reliable operations while maximizing Overall Equipment Effectiveness (OEE). Solving challenges is the very foundation of who we are. After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint. When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry. Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: Repair and maintain machinery and equipment including: pumps, motors, filling and packaging equipment, conveyors, palletizers, piping, valves, tanks, agitators, drives, gearboxes, and utilities. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Perform inspections and preventive maintenance to ensure compliance with safety and regulatory requirements as well as to ensure equipment reliability. Work with filling line operators to efficiently change over line equipment for different label, container, and packaging sizes. Improve OEE (Overall Equipment Effectiveness) on the filling lines by Pareto analysis of OEE data and implementation of Lean Manufacturing tools to reduce downtime. Maintain all operating equipment in satisfactory condition. Schedule needed repairs to have minimum interference with operations. Troubleshoot/repair equipment in a timely and efficient manner. Comply with company safety rules and procedures. Complete daily and shift clean up tasks. Communicate results/ concerns/ issues with supervisor and co-workers. Ensure shift to shift hand-off is complete. Support and complete small capital projects. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Required Experience: 3+ years of maintenance experience in manufacturing environment; preferably in chemical/paint manufacturing High School Diploma or equivalent Must have expertise in packaging equipment, plumbing, and pipefitting, with skills in electrical work and instrument calibration considered a definite plus Demonstrated ability to diagnose and troubleshoot complex packaging and material-handling equipment is required Ability to do basic math. Accurately enter and retrieve computer data. Ability to operate machinery Ability to solve problems in a team environment. Active participation in our Continuous Improvement Process. Ability to consistently lift 50 pounds. Willing to work overtime as required.

Perform routine maintenance requirements on a fleet of tugs and barges as directed by the General Manager/Port Engineer. Perform inspections of vessels for repair & maintenance standards and procedures. Work with company mechanics as needed. Responsibilities Repair marine equipment on site under adverse conditions at all hours. Maintain the confidentiality of all sensitive communications. Required to work aboard boats and barges using winches and mechanical tools for repairs. Frequently required to board tugs, barges, and ships, at dock or at anchor at all hours. Perform related duties as assigned. Qualifications Knowledge of Cummins, Caterpillar, John Deere Engines. Knowledge of EMD and GE engine preferred. Knowledge of Twin Disc gears, Barge pumps, PTO's. Knowledge of pneumatic, hydraulic, electrical systems and components. Knowledge of the oil transportation and maritime industry. Knowledge of tug and barge maintenance systems and equipment. Work well with others using courtesy, tact, and good judgment. Must be physically fit enough to board barges and tugs at sea and in port in all weather conditions. Ability to understand and execute complex oral and written instructions. Ability to work independently with minimal or no guidance. Ability to get along with office staff and vessel crewmembers. Must be able to read, speak, write, type, and understand English in person and over the telephone. Valid state drivers' license. Valid TWIC Card or ability to obtain. HAZWOPER training within 90 days of being hired. AED First Aid and CPR training. Must be 18 years of age or older. Job Condition and Environment Travel may be involved on certain projects. Must be able to work independently and without direct supervision. Exposure to all weather conditions (rain, ice, snow, heat, wind, heavy seas, etc.) Expected Hours of Work Normal office hours are 7:00 a.m. to 4:00 p.m. Monday through Friday. Takes communications 24 hours a day, including weekends, concerning vessel maintenance, repair, and operations. Company Overview Centerline Logistics is a leading provider of marine transportation services in the United States. Centerline Logistics operates on the United States West Coast (including Alaska and Hawaii), United States East Coast (including Puerto Rico), the United States Gulf Coast and the Mississippi River System. Services provided include the transportation and storage of petroleum products, tanker escort, ship assist, the transportation of general cargo and rescue towing. Centerline Logistics is the parent company of eight businesses specializing in marine services and a bulk liquids terminal business. Centerline Logistics provides accounting, administrative, human resources, safety and environmental services, and other support to the subsidiary companies. The Company offers Medical, Dental, Vision, Life and AD&D options to our employees and their eligible dependents after meeting Company requirements. 401(k) options, Disability Insurance, sick pay, vacation pay, 10 paid holidays per calendar year (subject to work schedule) and Healthcare and/or Dependent Care FSAs are also available to our employees after meeting Company requirements. All benefits information may be subject to change based on any current or updated benefit plan year changes and/or Collective Bargaining Agreements. We are an Equal Employment Opportunity and Drug Free Work place. Pre-employment drug testing is required.

Job Type: Full-Time Schedule: Monday-Friday Pay Range:$30-$36 depending on skills Responsibilities: Perform thorough, accurate preventative maintenance inspections. Able to diagnose and repair emission related problems. Following schedules, complete all required maintenance operations including lubrication, fluid changes, brake adjustments, and tire rotation. With direction from the Fleet Maintenance Supervisor, performs unscheduled maintenance as needed. Performs complex operations including engine, electrical, fuel, brake, and exhaust repairs and field tests. This requires interpreting and working from drawings, specifications, and other technical materials. Perform emergency roadside services as needed. Inspection of equipment and diagnose mechanical defects. Document repairs and parts on work orders completely and accurately Maintain tools and workplaces so that conditions are neat and orderly. Performs other duties as required. Emergency conditions may require on call service calls, extended hours, or weekend work flexibility. May, on occasion, be required to drive vans, buses, and vehicles to perform road tests etc. Perform other duties as required. Assist with maintaining cleanliness of assigned bus. Occasionally attend field trips and special events to ensure passenger safety. Qualifications: 5+ years' experience (A level) as a diesel mechanic or mechanic. Accreditation from a school or certification program Complete all training requirements Pre-employment background checks apply What We Offer: Opportunities for career growth and advancement Safety-first environment with comprehensive training & ongoing learning development opportunities Special recognition opportunities for exemplary safety and performance Dedication to supporting local communities through different charities, partnerships, and events Appreciation events, holiday parties, and birthday recognitions throughout the year Corporate culture that promotes the safety & well-being of children and families through our fundraising partnership with St. Jude Children's Research Hospital The below statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. STA is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants; returning military are strongly encouraged to apply. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law.

Mechanical: As requested and as the result of inspection tours, checks machines and equipment to see if they are operating efficiently When machines or equipment are not functioning properly, diagnoses the cause by observation, sound or other methods based on mechanical knowledge and determines what repairs or adjustments are needed Adjusts or changes settings of semi-complex and complex machines or assemblies involving simple or intricate adjustments As needed, repairs machines by replacing such parts as gears, discs, cams, belts, chains, studs, guides, shafts, bushings, etc. Makes test run and final adjustments Partially or completely dismantles equipment to make repairs and/or adjustments and reassembles equipment Pipefitting: Lies out and installs piping with valves, tees, nipples, drains, etc. Measures, cuts and threads pipe as needed Measures, cuts, bends and sweat couples copper tubing Connects pneumatic control instruments and adjusts control valves Packs valves, replaces gaskets, floats, washers, etc. Diagnoses cause of trouble and make necessary repairs, adjustments, or replacements to pipelines, valves, sprinkler heads, toilets, fountains, fluid or gas lines, etc. Estimates other than stock items needed and orders same through supervisors. Lubricating: Lubricates the moving parts and wearing surfaces of all assigned machines, mechanical equipment, motors, etc., and regulates the quantity to be used. Removes excess grease and foreign matter Uses specified lubricants Follows scheduled and deviates from same when necessary Notes any obvious equipment defects and notifies supervisor of same Utility Maintenance: Lies out and performs general masonry work, such as, building forms and the mixing and pouring of concrete for pedestals, footings, etc. Digs trenches and lay tile pipe, etc. Perform miscellaneous grounds maintenance work Makes minor floor and roof repairs Carpentry: Makes and/or repairs benches, platforms, closets, partitions, shelves, bins, racks, etc. Adjusts doors, and replaces locks and hinges Welding: Regulates the flow of gas to control flame or current for proper temperature. Performs routine welding duties involving broken or cracked parts or in the erecting and welding of small stands, etc. Skills: Know how to check, adjust, clean, and lubricate assigned equipment Know how to tend and operate boilers and make water tests Know how to diagnose cause of trouble in all equipment, dismantle and repair same Knowledge of plant layout Know how to make plumbing and pipefitting repairs and modification Physical and Working Conditions Required: Will be required to stand, walk, bend, climb, lift, and carry Will be required to work indoors and outdoors Must have good sight, touch, and hearing Must have good manual dexterity Must know how to operate hand and power tools common to the trade Must be able to work under natural and artificial light Education: High School Graduate This description because of the nature and importance of the position may not be all inclusive. Responsibilities may change as business conditions change.

Haddad Plumbing and Heating Inc. has Been in Business for 25 Years Servicing New Jersey, New York City, and Westchester County in Mid-Rise and High-Rise buildings with Exceptional Work and a Proven Track Record. Haddad Plumbing and Heating Inc is looking for an Experienced Shop Mechanic for all Company Vehicles and Equipment. Summary Perform Maintenance and Repairs on Company Vehicles such as Vans and Trucks. Work Involves Diagnosing Mechanical Issues, Conduct Routine Inspections, and Servicing Engines, Transmissions, and Hydraulic Systems; Troubleshooting and Repairing Electrical and Electronic Components; Ensuring all Vehicles and Machinery Operate Efficiently and Safely. Maintain Equipment, Tools, and Supplies to Support the Fleet and Machinery. Essential Functions Perform Diagnostics and Repairs on Vans, Trucks, and Equipment. Ensure Work Tickets are Completed for all Vehicles and Equipment. Perform Routine Maintenance on Our Company Fleet. Required Education and Experience Experienced in Vehicle, Equipment, and Diesel Maintenance Skilled in Heavy Equipment Repairs and Preventive Maintenance Strong Troubleshooting and Problem-Solving Abilities Detail-Oriented Capable to Work Independently

Join Our Team! Motorcoach Technician Hours: Minimum 40 hours/week About Us Delaware Express Tours is a leading tour company committed to delivering safe, comfortable, and memorable travel experiences. Our fleet includes top-tier motorcoaches-MCI, Van Hool, and Setra-and we take great pride in maintaining them to the highest standards. Join our team to play a critical role in keeping our coaches in top condition, ensuring our guests always travel smoothly and safely. What You'll Do Perform routine maintenance, inspections, and repairs on our motorcoach fleet (MCI, Van Hool, Setra) Diagnose mechanical and electrical issues using diagnostic tools and manual expertise Troubleshoot and resolve problems with major systems: engines, transmissions, brakes, HVAC, suspension Conduct safety inspections and ensure each vehicle meets operational standards Respond to road calls or breakdowns when needed, providing field service and emergency repairs Maintain accurate documentation: service logs, repair orders, parts used, labor hours Collaborate with other maintenance team members to order and manage parts inventory Uphold a clean, safe, and organized shop environment, following all safety protocols Occasionally assist with road testing and quality control after repairs Who You Are You have experience repairing heavy-duty trucks or buses (motorcoach experience is a plus, but not required) You have strong mechanical and electrical skills - you're comfortable working on complex systems You pay close attention to detail and have a strong commitment to safety and quality You can work independently yet are a supportive team member You're reliable, responsible, and ready to contribute to a maintenance-driven environment What We Offer Competitive hourly pay, based on experience & work history Opportunities to grow your skills and advance your career A supportive, safety-first work environment Full-time role (≥ 40 hours/week) Benefits Package: Health insurance Dental insurance Vision insurance Retirement plan Paid time off Licenses & Certifications CDL Class B (preferred) ASE Certifications or similar training is a plus Typical Mechanic / Technician Duties Motorcoach mechanics are responsible for: Diagnosing mechanical faults using diagnostic equipment Repairing or replacing faulty bus components (engines, brakes, transmission, HVAC, electrical) Performing routine preventive maintenance (fluids, filters, brake checks, etc.) Keeping detailed maintenance records and documentation Communicating with drivers and team members about vehicle status and maintenance needs Performing road tests to ensure repaired vehicles are safe and compliant

Job Description RESPONSIBILITIES/DUTIES: Responsible for inspection, troubleshooting and repair of aircraft to meet company, FAA and customer standards. This includes: • Fully analyzes all required blueprints, drawings, work orders and sketches in order to troubleshoot, repair and install desired product or part. • Can detect errors and correct through proper departmental channels • Schedules items through the shop to maintain on-time deliveries • Checks all mechanical components prior to installation to prevent damage • Accurately estimates hours and materials for scheduled jobs • Ability to operate all required ground support equipment QUALIFICATIONS: • Extensive knowledge of all aircraft mechanical systems functions and interactions • Thorough working knowledge of all current FAA Regulations • Thorough working knowledge and use of MM, IPC, SRM and other manufacturers repair and troubleshooting documents • Thorough working knowledge of blueprints, work orders and task cards to determine type of configuration and special instructions prior to installation • Extensive knowledge of aircraft accessories, components and other hardware • Comprehensive knowledge of estimating hours and materials for completing projects • Complete knowledge of aircraft fasteners and applications • Complete knowledge of all related skill area machines, equipment and hand tools • Ability to install and rig aircraft flight control surfaces • Ability to operate aircraft systems • Ability to do engine "run-up" and "trim engines" SPECIAL POSITION REQUIREMENTS: • Wear appropriate PPE as designated in each work area (e.g. safety glasses, etc.) • High School diploma or equivalent • Airframe and Power Plant License • Must have a good command of the English language, both written and verbal • Must possess a valid driver license SUPERVISORY RESPONSIBILITY: • None TRAINING REQUIREMENTS: • General Safety • Quality System Awareness WORKING CONDITIONS AND PHYSICAL EFFORT: • Heavy physical effort required on occasion • Continuous mental and visual attention required • Employees may be subject to random drug and alcohol testing under FAA regulations • Work performed in a shop environment on a regular basis • Occasional travel to line stations • Exposed to any number of elements but with none present to the extent of being disagreeable • May work at different workstations as needed, and/or shifts from one station \ location to another Mountain Air Cargo, Inc. is an Equal Opportunity Employer. We offer a comprehensive benefits package.

As our Maintenance Mechanic you are are to maintain and repair plant equipment to ensure safe and reliable operations while maximizing Overall Equipment Effectiveness (OEE). Solving challenges is the very foundation of who we are. After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint. When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry. Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: Repair and maintain machinery and equipment including: pumps, motors, filling and packaging equipment, conveyors, palletizers, piping, valves, tanks, agitators, drives, gearboxes, and utilities. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Perform inspections and preventive maintenance to ensure compliance with safety and regulatory requirements as well as to ensure equipment reliability. Work with filling line operators to efficiently change over line equipment for different label, container, and packaging sizes. Improve OEE (Overall Equipment Effectiveness) on the filling lines by Pareto analysis of OEE data and implementation of Lean Manufacturing tools to reduce downtime. Maintain all operating equipment in satisfactory condition. Schedule needed repairs to have minimum interference with operations. Troubleshoot/repair equipment in a timely and efficient manner. Comply with company safety rules and procedures. Complete daily and shift clean up tasks. Communicate results/ concerns/ issues with supervisor and co-workers. Ensure shift to shift hand-off is complete. Support and complete small capital projects. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Required Experience: 3+ years of maintenance experience in manufacturing environment; preferably in chemical/paint manufacturing High School Diploma or equivalent Must have expertise in packaging equipment, plumbing, and pipefitting, with skills in electrical work and instrument calibration considered a definite plus Demonstrated ability to diagnose and troubleshoot complex packaging and material-handling equipment is required Ability to do basic math. Accurately enter and retrieve computer data. Ability to operate machinery Ability to solve problems in a team environment. Active participation in our Continuous Improvement Process. Ability to consistently lift 50 pounds. Willing to work overtime as required.

Fraza & Vitan Equipment is looking for an experienced Forklift Technician to repair heavy equipment. You'll service, diagnose, and maintain forklifts and material handling equipment-no two days are the same. Why you'll love it here: Pay range $21-$33 an hour, based on experience and qualifications Weekly pay Company vehicle provided No weekends Medical, dental, vision, & pension What you'll do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What you'll need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Get to know us: Fraza and Vitan Equipment is a full-service material handling business with over 300 skilled employees across Michigan and the East Coast. Our team uses innovative equipment and processes to push your business forward and increase efficiency. We're always on the lookout for talented individuals to join our team and grow their careers in a challenging but positive environment. Take the next step in your career-apply today!

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. The pay range for this position is $17.00 to $19.00 / hour Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

Warehouse Mechanic | Dayton Warehouse $ Competitive Pay | Temp-to-Hire Key Details: Schedule: Full-time, 8-hour shifts, Monday to Friday with overtime and weekend availability. Job Type: Temp-to-Hire Quick Highlights: Build, maintain, and repair a variety of machinery and vehicles. Experience required in AC, plumbing, mechanical, and electrical maintenance. Proven ability to handle Hi-Lo and Conveyor Maintenance. Certification such as ASE preferred, but not required. Responsibilities: Assemble machines and mechanical components. Conduct regular maintenance and repairs for enhanced reliability. Perform diagnostic tests and identify functionality issues. Ensure all machines and engines are kept in peak operational condition. Follow all health and safety guidelines diligently. Qualifications: Proven experience as a Mechanic. Strong knowledge of hydraulic, electrical systems, and their components. Proficient with hand tools and precision measurement tools (e.g., calipers). High school diploma preferred; vocational training or apprenticeship a plus. Excellent communication skills, problem-solving ability, and physical stamina. What We Offer: A dynamic work environment with a strong commitment to safety. Competitive pay rates and a pathway to permanent employment. Comprehensive on-the-job training and professional development. If you're a skilled Mechanic looking for a stable opportunity that offers growth and a chance to work with a variety of mechanical systems, apply today to join our team in Dayton!

We are currently seeking an experienced automotive mechanic to work at Wolfgangs of Tenafly. Our well known shop specializes in Mercedes Benz and we are looking for two experienced techs to join our team. Work on amazing vehicles in a great atmosphere. Clean shop with all of the latest equipment. Candidates must be fluent in all aspects of diagnosis and repair, specifically with Mercedes Benz. We work on other vehicles however Mercedes is our focus. Responsibilities: - Conducting routine maintenance on vehicles, including oil changes, tire rotations, and brake inspections - Diagnosing and repairing mechanical and electrical issues - Conducting inspections and test drives to diagnose issues - Using diagnostic tools and equipment to identify issues - Ordering parts and supplies as needed - Keeping track of work orders and invoices - Providing excellent customer service and communicating effectively with clients If you are an experienced automotive mechanic with a passion for European cars, we would love to hear from you. Please apply with your resume and cover letter. Requirements Requirements: - Minimum of 5+ years of experience working as an automotive mechanic - Strong understanding of European car models and their unique features - Ability to diagnose and repair mechanical and electrical issues - Proficiency in using diagnostic tools and equipment - Ability to work independently and as part of a team - Excellent problem-solving skills - Strong attention to detail - Excellent customer service skills - Strong communication skills - Available to work a minimum of 40 hours per week, 8:30 AM - 5:00 PM with a 30-minute lunch - Minimum of two references Salary Description $45/hour