Diesel technician jobs in Laredo, TX

Shop Technician Classification Non-Exempt The Shop Technician is responsible for servicing and repairing equipment in the shop. Essential Functions Must be capable of removal and installation of components by following the appropriate service manual. Understand and utilize various exchange items. Evaluate price of exchange vs. cost of repair Safely operate, inspect machines, vehicles and/or engines to diagnose defects Diagnose, troubleshoot and repair all component of equipment. Including, but not limited to engines, power trains, hydraulics, fuel systems, power generation and electrical codes Formally document the work done on the equipment Complete work assignments, and assigned training within allotted time. Secure and maintain appropriate licensing Maintain good work habits, and comply with all safety/company regulations Perform other duties as requested by management Qualifications Associate's degree or equivalent from a two-year College or technical school preferred Qualified applicants will have experience in trouble-shooting, and repairing diesel-powered heavy equipment The candidate must have basic computer skills Maintains good work habits, and presents a favorable business image towards customers served by the company Ability to read, comprehend simple instructions, short correspondence and memos Ability to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization Ability to add, subtract, multiply and divide in all units of measure. Use whole numbers, common fractions, and decimals. Ability to compute rate, ratio and percent and to draw/interpret bar graphs Ability to deal with problems involving a few concrete variables in standardized situations Must own proper tools to perform required repairs Typical Physical Activity While performing the duties of this job, the employee must have the ability to occasionally lift 75 pounds from floor to chest; reach and use the arms with a full range of motion; endure prolonged standing, stooping, kneeling, crouching, and squatting while performing mechanical operations; exert push and pull forces with the arms in order to use various wrenches and tools; endure prolonged forward and overhead arm positions while performing mechanical operations; use hands to grasp hand tools and parts and climb onto and operate equipment. Typical Environmental Conditions Employee regularly works indoors around moving mechanical parts. May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity. Noise level may be loud at times. Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment. Requires wearing common protective or safety equipment. Required to perform work in cramped spaces and/or high places. The Shop Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. Doggett is an Equal Employment Opportunity Employer

Anderson Columbia Co. Inc. is accepting resumes for an Experienced Diesel Mechanic. Since 1958, Anderson Columbia has been an industry leader in paving and road building, making smooth stomping grounds for vehicles of all kinds. We strive to construct roads from the highest quality materials and apply ourselves to ensure the job is done right. From small backstreets to congested highways, we perform jobs of all proportions and create pavement in a way that makes the ride enjoyable. We pride ourselves on being one of the Largest Construction & Aggregate Producing Contractors in Florida. Our sense of professionalism paired with our teams of highly-trained personnel allows us to be successful at every job we employ. Anderson Columbia doesn't just hire employees into a company, we hire people into our family; after all, people are our greatest asset. If you appreciate the feeling of sweat on your forehead, the sense of accomplishment at the end of a long day, or the pride in calloused hands, Anderson Columbia may have a place for you. Pay Rate - Starting at $20+ DOE Requirements - 3-5 years of experience with both gas and diesel engine repair. Must have basic set of general tools Must pass Pre-Employment Drug Screen and Physical. Must have valid driver's license. Must have reliable transportation. Must be willing to work 10-12 hour shifts Monday - Friday, with the occasional Saturday. Experience utilizing machines/equipment as follows: hand tools, drills, grinders, saws, multimeter, tachometer, welder, cutting torch, hydraulic gear puller, electric forklifts, pallet jacks, and platform lifts. *Special Consideration for applicants who posses CDL Licenses. Responsibilities - Perform scheduled preventative maintenance on mechanical material handling equipment. Perform emergency mechanical repairs to failed material handling systems. Identify and locate required repair parts for failed systems. Maintain accurate record keeping such as: work orders, time sheets, and parts requests Benefit Packages available after 3 months. Healthcare, Dental, Eye, Life Insurance, paid holidays. 401 k after 6 months, with company match program. DFW / EOE Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Job Description Experienced Automotive Technician - $20-30 per hour - 80-100 hours per pay period We run an honest shop and need honest, hard-working techs. Here, you'll work alongside some of the best in the business and make great money while doing it. If you love diagnosing and repairing vehicles while maintaining a positive attitude, then let's talk! Job Responsibilities Examine and diagnose Mercedes-Benz vehicles and other makes Repair Vehicles Attend company and factory training Keep current with factory technical bulletins Education and/or Experience High school diploma or GED (general equivalency diploma); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience. Certificates, Licenses, Registrations Operator Driver License State Inspection License Compensation Compensation is based on experience and commensurate with Fortune 500 companies. Benefits Benefits include medical and dental insurance, 401K retirement savings plan, vacation time, holiday and sick leave, company paid continuing education and training. Our company maintains a strong policy of equal employment opportunity for all associates. We hire, train, promote and compensate associates on the basis of personal and professional competence and potential for advancement without regard for race, color, religion, sex, national origin, age, marital status, disability or citizenship, as well as other classifications protected by applicable federal, state or local laws. About Our Dealership We believe our employees are our greatest asset! As such, we treat all employees with respect and appreciation for their contributions to the company. We believe not only in providing ongoing training, but also rewarding outstanding effort and results through bonus and commission programs. We are a family owned and operated, second generation organization with state of the art facilities and a commitment to see our employees succeed. If this sounds appealing to you, please complete our application to determine your eligibility.

Who We Are Centuri Group is comprised of a family of companies that make up a utility infrastructure enterprise, operating throughout the US and Canada, committed to safely delivering gas, electric and utility services to our customers and the community. We help you build your career on Solid Ground by investing in your development and valuing your unique skills, perspective, and background. Employees are the lifeblood of our organization, and we're committed to providing a stable foundation to continuously grow and thrive. We've got work for the next 100 years - All we need is you! At Linetec our Mechanics bring a strong base of mechanical knowledge and experience including with tools, equipment, and vehicles. You should possess a great work ethic, a willingness to learn new machines, and be accustomed to the mechanic's trade. You will encompass a variety of functions that are critical to the success of Linetec. CDL strongly preferred or ability to acquire CDL permit within 60 days of hire. What You'll Do * Perform basic welding tasks * Repair, over haul and replace major truck and automobile components * Communicate with fellow team members regarding broken equipment, repairs that need to be made, timelines and costs * Service equipment when returned from a job site * Make major and minor repairs to equipment * Maintain log books of repairs * Complete required company training, including safety training * Perform Administrative and Lineman duties as required * Perform other responsibilities as requested by leadership What You'll Have * High school diploma or GED required * Must meet the requirements for Mechanic level I * Skilled in Mechanical operations including welding, vehicle and small equipment repair * CDL strongly preferred or ability to acquire CDL permit within 60 days of hire * Ability to follow through on tasks * Possess a customer service attitude * Excellent multitasking, problem solving and critical thinking skills * Ability to maintain flexibility in a fast-paced environment * Willing to learn our standard processes and procedures * Desire to learn and commitment to doing quality work while putting safety first * Will be required at times to travel to job sites to make repairs What You'll Get * Benefit Package including Medical, Dental and Vision Coverage * 401K w/ Company Match * Voluntary Life & AD&D Insurance and Short-Term and Long-Term Disability * Vacation/Sick Time and Paid Holidays * Potential Bonus Opportunities * Career Development Opportunities * Employee Discounts * Weekly Payroll Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record is required * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: San Antonio Nearest Secondary Market: San Antonio

Automotive Technicians / MechanicsAll Tune Laredo-6125 - Laredo, TX About Us All Tune Laredo-6125 is a trusted, full-service automotive repair and maintenance shop in Laredo, TX, proudly serving our community with honesty, quality, and precision. We're expanding our team and have openings for Automotive Technicians / Mechanics at all skill levels. Whether you're an entry-level technician eager to grow or an experienced ASE-certified professional ready to take the lead, we invite you to join our fast-paced, team-oriented environment where your skills and dedication are valued.Our technicians are passionate problem solvers-skilled, detail-oriented, and committed to delivering exceptional customer service every time. Position Overview The Automotive Technician / Mechanic performs customer-requested maintenance and repairs with accuracy, efficiency, and strong quality control. You'll diagnose mechanical and electrical issues, perform preventative maintenance, and ensure vehicles are returned to customers in safe, reliable condition. This position offers excellent opportunities for career advancement, including pathways to become a Master Technician or move into shop leadership roles with continued training and experience. Key Responsibilities Perform diagnostics, inspections, maintenance, and repairs on all makes and models Conduct services such as brakes, suspension, steering, electrical systems, and HVAC Execute high-quality repairs efficiently and accurately while following company procedures Communicate clearly with service advisors and team members regarding vehicle needs Maintain a clean, safe, and organized work environment Mentor and assist less experienced technicians as needed Ensure all repairs meet safety and quality standards Follow company policies and manufacturer guidelines for all work performed Schedule Full-time position Monday through Friday, with availability for occasional weekends as needed Qualifications Minimum 1 year of experience in a professional automotive shop environment At least 1 ASE certification preferred (not required) Section 609 EPA Certification for automotive HVAC (required or must obtain within 6 months) Comfortable using modern diagnostic tools and repair equipment Strong mechanical aptitude and troubleshooting ability Must provide personal hand and specialty tools Valid state driver's license and clean driving record Must be 18 years or older and able to lift 50 lbs. Team player with a positive attitude and commitment to learning Reliable transportation to commute to Laredo, TX Why Join All Tune Laredo-6125At All Tune Laredo-6125, you'll work alongside experienced professionals who are passionate about cars and customer care. We believe in investing in our people-through training, certification support, and growth opportunities-so you can advance your skills and career in the automotive industry. If you're motivated, dependable, and ready to take your automotive career to the next level, apply today and join a team that drives excellence! Compensation: $12.00 - $25.00 per hour At All Tune Total Car Care, we have proudly served local communities for nearly 40 years. Our ASE-certified technicians are committed to providing high-quality service, ensuring vehicles stay in top condition for the long road. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchise. All inquiries about employment at this franchise should be made directly to the franchise location, and not to All Tune Total Auto Care Corporate.

Full-time Description Our Commitment To You: Competitive wages Medical insurance plan 401k retirement A professional and respectful work environment Paid vacation/holidays Employee vehicle purchase program Responsibilities (include but are not limited to): Efficiently perform the needed services by utilizing state of the art automotive equipment. Assist technician mechanics in performing technical activities. Inspect, diagnose and repair to specifications - vehicle automotive systems including engine, transmission, brake and hydraulic, exhaust, primary and/or advanced fuel ignition and electrical, steering, suspension and alignment, braking, air conditioning, and computer systems. Adequately explain discovered technical diagnoses and required repairs to service advisors and if necessary to customers. Continuously seek out and learn new technical information, equipment, tools and techniques in formal training sessions in order to stay abreast with rapidly changing technology. Professionally record findings on approved documents so that necessary customer estimates and proper repairs can be made. Assist technician/mechanics in performing technical activities. Keeps store management aware of mechanical repair problems as they occur. Maintain and secure work tools. Turn off and lock out equipment when not in use. Maintain an organized, clean and hazard free work environment. Other duties as assigned. Requirements Our Ideal Candidate Will Possess: Experience in automotive mechanical diagnosis, problem-solving and repair experience to succeed in this position. A high level of motivation and energy and strong customer service skills are also required. Appropriate hand tools necessary for services performed. Safe working knowledge of shop tools and equipment such as scanners, electrical diagnostic equipment, A/C recovery equipment, fluid exchange equipment, lift operation, etc. Automotive Service Excellence (ASE) and A/C Refrigerant handling certifications are a plus, but not required unless performing A/C or other license required services. Ability to identify, comprehend and act on changing requirements; ability to work well under different environment conditions. Ability to bend, stoop, reach and retrieve; lift, move, carry, and load items of various sizes and weights in operable and undamaged condition. Ability to communicate and understand English and Spanish; including reading and writing. Maintain a valid driver license, ability to drive a variety of vehicle types, insurable. High School Diploma or equivalent Working Conditions: Must be able to stand on concrete or metal surfaces for extended periods of time. Work in an environment that frequently experiences extreme hot and cold temperatures, loud noises, and exhaust fumes. Lift and move inventory items, trashcans and other work related items (up to 50 pounds). Must be able to stand and move six to eight hours per day. Must be able to push, pull, pull up, bend at the knees and waist, twist body at the waist, raise and hold arms overhead, turn head-neck-shoulders as needed, grasp and hold tools and other items with hands, for either extended periods of time or many times throughout the shift.

Auxiliary Date Available: 03/26/2025 Attachment(s): * 6 - Mechanic Transp 04-25 rev.docx

LUBEZONE IS HIRING! LubeZone, Inc., a national provider of preventative maintenance solutions for the transportation industry has immediate Full-Time and Part-Time positions open for a Lube Technician in our location! Responsibilities Lube Technician Requirements: No technical experience necessary! We will train you in new skills that will serve you well. But, if you do have related experience, bring it! Our Teams make us who we are, and we are always ready to welcome quality people to join our Team. Qualifications A great attitude, excellent customer service, reliability, and stable work history. Basic interest in mechanical work / or enjoy working with your hands. Desire to help provide preventative maintenance solutions to customers in the transportation industry, in a clean, safe, efficient, and fun environment. Ability to help maintain the cleanliness and organization of the facility, equipment, tools, and inventory to provide a safe and clean environment for both Customers and Teammates. Ability to lift 50 pounds. Benefits Competitive Pay based on your experience. Eligible for performance-based incentives in the first full month and thereafter. (This can add the equivalent to $3 per hour to your hourly rate!) Full-time benefits Paid time off including holidays 401(k) w/ company match, 100% vested (after 90 days) FREE Dental insurance and FREE Vision insurance Health insurance HSA plan Disability insurance Life insurance Employee assistance program Full-time work schedules that can include a 4-day workweek! Part-time hours also available. No overnight work. Fully paid training program. All tools and personal protective equipment you need to do the job. Uniforms and uniform cleaning. Free safety footwear & replacement. Posted Salary Range USD $16.00 - USD $19.00 /Hr.

WE ARE HIRING! Mechanic II- Frac At Lewis Energy Group, we are a vertically integrated exploration and production (E&P) company and a leading natural gas producer in South Texas and across the nation. With operations in South Texas, Colombia, and Mexico, we take pride in our long-standing commitment to excellence, innovation, and community engagement. What sets us apart is our family-oriented work culture, built over decades of dedication and teamwork. This culture drives the passion we bring to our work and the positive impact we strive to make in the communities where we operate. As an Mechanic II- Frac, you will diagnose and perform complex mechanical, electrical, hydraulic, and pneumatic repairs on company assets, including DOT and Completions Services equipment. Responsibilities What You'll Do: ️ Perform preventative maintenance and repairs on DOT and Completions Services equipment according to company standards and timelines️ Accurately document maintenance activities, failures, and repairs in the Computerized Maintenance Management System (CMMS)️ Identify, order, and replace parts and equipment as needed️ Troubleshoot and diagnose complex equipment issues️ Conduct routine tool and equipment inspections, ensuring cleanliness and functionality️ Support and assist lower-level Mechanics in completing repairs and maintenance tasks Qualifications About You (Qualifications & Experience) We are looking for dedicated individuals who bring expertise, problem-solving abilities, and a strong work ethic to our team. Ideal candidates will have: Education: High school diploma or GED required; technical/vocational certificate preferred Experience: Minimum of 3 years of related mechanical experience in equipment maintenance and repair Licenses: Valid Driver License required; DOT License preferred Technical Skills: Knowledge of Microsoft Office Suite and basic computer use Familiarity with RTA Fleet Management Software preferred Language Skills: Bilingual in English and Spanish preferred Additional Skills: Strong communication and time management skills Ability to work under pressure and solve complex problems Your Work Schedule & Hours Work shifts up to 12 hours Overtime as needed 10/5 Rotation Schedule (Ten days on, 5 days off) Hours may vary based on operational needs Your Benefits At Lewis Energy Group, we value the dedication and hard work of our employees. That's why we offer a comprehensive benefits package designed to support you and your family while keeping costs affordable. Insurance - Medical, Dental, Vision, Basic Life, AD&D, and additional benefit options tailored to your needs Retirement - 401K with a 4% company match Annual Bonus - Awarded at the discretion of the Compensation Committee Generous PTO & Paid Holidays Employee Assistance Program (EAP) - Free, confidential support for you and your dependents Career Progression Program - Opportunities for growth and development ️On-Site Fitness Center Wellness & Company Events throughout the year Lodging (dependent on role) Per Diem for drilling roles Join Lewis Energy Group and become part of a company that values hard work, innovation, and the well-being of its team members. Apply online at ******************* .

Lewis Energy is a privately-owned, exploration and production company. Unlike most E&P companies, we are vertically integrated. As a vertically integrated company, we have incorporated the latest technology which allows us to keep our costs down. Our innovation allows us to continue drilling during hard times when other companies are abandoning their operations. Lewis Energy Group is looking for a highly motivated Heavy Truck Mechanic to join our Service Center team. The Heavy Truck Mechanic will perform preventative maintenance and routine mechanical, electrical, hydraulic, and pneumatic repairs on company assets to include all DOT equipment. Responsibilities Heavy Duty Maintenance: Performs preventative maintenance on all DOT equipment according to established guidelines and time frames. Keeps accurate and detailed records of failures and repairs in Computerized Maintenance Management System. Acts as an assistant to more senior Mechanics on larger jobs. Troubleshooting: Troubleshoots and diagnoses routine problems or recurring malfunctions of company assets and chooses course of action. Consults with supervisor to ensure accuracy of diagnosis and approval for work. Completes troubleshooting repairs and/or modifications work on equipment. Tool Maintenance: Performs daily inspections of tools and equipment used. Ensures cleanliness of hand tools, equipment and parts. Qualifications High school diploma or general education degree (GED); minimum five years related experience or training; or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Bilingual in English and Spanish. Computer Skills To perform this job successfully, an individual should have basic knowledge of computer use and Microsoft Office Suite. Knowledge of CMMS software is a plus. Certificates, Licenses, Registrations Valid Driver License. DOT License is a plus. Other Skills and Abilities Strong communication and time management skills. Ability to work under pressure. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to stand and climb or balance. The employee is occasionally required to sit and and/or smell. The employee must occasionally lift and/or move up to 50 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; high, precarious places and outside weather conditions. The employee is frequently exposed to extreme heat and vibration. The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock. The noise level in the work environment is usually moderate. Top benefits As a team member at Lewis Energy Group, you'll enjoy: Paid time off Comprehensive benefits package, including health, vision and dental insurance Career advancement and bonus opportunities Location Lewis Energy Group is located in Encinal, Texas and is situated along Interstate 35, approximately 40 miles north of Laredo.

We run an honest shop and need honest, hard-working techs. To be a success at our dealership, you need to have solid skills and solid ethics. We also know that to keep a good service tech, a dealership has to treat them right by paying them well and offering room for learning and advancement. Here, you'll work alongside some of the best in the business and make great money while doing it. If you love diagnosing and repairing vehicles while maintaining a positive attitude, then let's talk! Job Responsibilities Examine and diagnose vehicles Discuss repairs with shop foreman or service advisor Communicate additional service requests to service advisor Plan work in cooperation with shop foreman Provide labor estimates to service advisor Monitor repair time and update service advisor Maintain strict adherence to dealership policies on vehicle care and operation Complete story and/or documentation for client repairs Assist in mentoring technician trainees Attend company and factory training Keep current with factory technical bulletins Understand and follow federal, state and local regulations (such as disposal of hazardous waste) Education and/or Experience High school diploma or GED (general equivalency diploma); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience. Certificates, Licenses, Registrations Operator Driver's License & State Inspection License Compensation Compensation is based on experience and commensurate with Fortune 500 companies. Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Life insurance Opportunities for advancement Paid time off Vision insurance About Us: At Charlie Clark Auto Group, (AMARU), we lead with LOVE in everything we do, towards our people, our community, our family, and our faith. Rooted in the enduring values and legacy of Charles and Dorothy Clark, Maricruz Aurora Aguirre, Nana, and those who paved the way before us, LOVE is the driving force behind everything we do. Join us and be part of our ORALÉ TEAM!

Anderson Columbia Co. Inc. is accepting resumes for an Experienced Diesel Mechanic. Since 1958, Anderson Columbia has been an industry leader in paving and road building, making smooth stomping grounds for vehicles of all kinds. We strive to construct roads from the highest quality materials and apply ourselves to ensure the job is done right. From small backstreets to congested highways, we perform jobs of all proportions and create pavement in a way that makes the ride enjoyable. We pride ourselves on being one of the Largest Construction & Aggregate Producing Contractors in Florida. Our sense of professionalism paired with our teams of highly-trained personnel allows us to be successful at every job we employ. Anderson Columbia doesn't just hire employees into a company, we hire people into our family; after all, people are our greatest asset. If you appreciate the feeling of sweat on your forehead, the sense of accomplishment at the end of a long day, or the pride in calloused hands, Anderson Columbia may have a place for you. Pay Rate - Starting at $20+ DOE Requirements - * 3-5 years of experience with both gas and diesel engine repair. * Must have basic set of general tools * Must pass Pre-Employment Drug Screen and Physical. * Must have valid driver's license. * Must have reliable transportation. * Must be willing to work 10-12 hour shifts Monday - Friday, with the occasional Saturday. * Experience utilizing machines/equipment as follows: hand tools, drills, grinders, saws, multimeter, tachometer, welder, cutting torch, hydraulic gear puller, electric forklifts, pallet jacks, and platform lifts. * Special Consideration for applicants who posses CDL Licenses. Responsibilities - * Perform scheduled preventative maintenance on mechanical material handling equipment. * Perform emergency mechanical repairs to failed material handling systems. * Identify and locate required repair parts for failed systems. * Maintain accurate record keeping such as: work orders, time sheets, and parts requests Benefit Packages available after 3 months. * Healthcare, Dental, Eye, Life Insurance, paid holidays. * 401 k after 6 months, with company match program. DFW / EOE Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Service Technician - Automotive **Sign-on bonus of up to $5,000.00** Do you thrive in a fast-paced environment? Do problem-solving and customer service get your engine revving? Let your mechanical knowledge, technical expertise and outstanding attitude take your career to new heights as aservice technician on our exceptional team. We are looking for a leader who can mentor other technicians, diagnose and perform repairs quickly and efficiently, and clearly communicate with customers and service consultants. Job Responsibilities Determine and discuss vehicle issues, current work and future needs with customers and service advisors. Diagnose, maintain and repair automotive systems. Perform quality inspections, including test drives, of vehicles prior to returning them to customers Communicate directly with service advisors to keep customers informed of any additional service needs and provide an estimate for any new repairs. Execute repairs under warranty to manufacturer specifications. ASE CERTFICATONS Required. Compensation Compensation is based on experience and commensurate with Fortune 500 companies. Job Requirements 2+ years of industry experience Personal tools Strong passion for completing quality work and providing exceptional customer service Valid driver's license Education and/or Experience High school diploma or GED (general equivalency diploma); or 2 to 5 years related experience and/or training; or equivalent combination of education and experience. Sign-On Bonus: We offer a sign-on bonus of up to $5,000.00 based on experience and qualifications. Benefits Benefits include medical and dental insurance, 401K retirement savings plan, vacation time, holiday and sick leave, company paid continuing education and training. Our company maintains a strong policy of equal employment opportunity for all associates. We hire, train, promote and compensate associates on the basis of personal and professional competence and potential for advancement without regard for race, color, religion, sex, national origin, age, marital status, disability or citizenship, as well as other classifications protected by applicable federal, state or local laws. About Our Dealership We believe our employees are our greatest asset! As such, we treat all employees with respect and appreciation for their contributions to the company. We believe not only in providing ongoing training, but also rewarding outstanding effort and results through bonus and commission programs. We are a family owned and operated, second generation organization with state of the art facilities and a commitment to see our employees succeed. If this sounds appealing to you, please complete our application to determine your eligibility.

Job DescriptionAutomotive Technicians / Mechanics All Tune Laredo-6125 Laredo, TX About Us All Tune Laredo-6125 is a trusted, full-service automotive repair and maintenance shop in Laredo, TX, proudly serving our community with honesty, quality, and precision. Were expanding our team and have openings for Automotive Technicians / Mechanics at all skill levels. Whether youre an entry-level technician eager to grow or an experienced ASE-certified professional ready to take the lead, we invite you to join our fast-paced, team-oriented environment where your skills and dedication are valued. Our technicians are passionate problem solversskilled, detail-oriented, and committed to delivering exceptional customer service every time. Position Overview The Automotive Technician / Mechanic performs customer-requested maintenance and repairs with accuracy, efficiency, and strong quality control. Youll diagnose mechanical and electrical issues, perform preventative maintenance, and ensure vehicles are returned to customers in safe, reliable condition. This position offers excellent opportunities for career advancement, including pathways to become a Master Technician or move into shop leadership roles with continued training and experience. Key Responsibilities Perform diagnostics, inspections, maintenance, and repairs on all makes and models Conduct services such as brakes, suspension, steering, electrical systems, and HVAC Execute high-quality repairs efficiently and accurately while following company procedures Communicate clearly with service advisors and team members regarding vehicle needs Maintain a clean, safe, and organized work environment Mentor and assist less experienced technicians as needed Ensure all repairs meet safety and quality standards Follow company policies and manufacturer guidelines for all work performed Schedule Full-time position Monday through Friday, with availability for occasional weekends as needed Qualifications Minimum 1 year of experience in a professional automotive shop environment At least 1 ASE certification preferred (not required) Section 609 EPA Certification for automotive HVAC (required or must obtain within 6 months) Comfortable using modern diagnostic tools and repair equipment Strong mechanical aptitude and troubleshooting ability Must provide personal hand and specialty tools Valid state drivers license and clean driving record Must be 18 years or older and able to lift 50 lbs. Team player with a positive attitude and commitment to learning Reliable transportation to commute to Laredo, TX Why Join All Tune Laredo-6125 At All Tune Laredo-6125, youll work alongside experienced professionals who are passionate about cars and customer care. We believe in investing in our peoplethrough training, certification support, and growth opportunitiesso you can advance your skills and career in the automotive industry. If youre motivated, dependable, and ready to take your automotive career to the next level, apply today and join a team that drives excellence!

Full-time Description Our Commitment To You: Competitive wages Medical insurance plan 401k retirement A professional and respectful work environment Paid vacation/holidays Employee vehicle purchase program Responsibilities (include but are not limited to): Assist technician mechanics in performing technical activities. Inspect, diagnose and repair to specifications - vehicle automotive systems including engine, transmission, brake and hydraulic, exhaust, primary and/or advanced fuel ignition and electrical, steering, suspension and alignment, braking, air conditioning, and computer systems. Adequately explain discovered technical diagnoses and required repairs to service advisors and if necessary to customers. Continuously seek out and learn new technical information, equipment, tools and techniques in formal training sessions in order to stay abreast with rapidly changing technology. Professionally record findings on approved documents so that necessary customer estimates and proper repairs can be made. Assist technician/mechanics in performing technical activities. Keeps store management aware of mechanical repair problems as they occur. Maintain and secure work tools. Turn off and lock out equipment when not in use. Maintain an organized, clean and hazard free work environment. Other duties as assigned. Requirements Our Ideal Candidate Will Possess: 1-2 years of automotive mechanical diagnosis, problem-solving and repair experience to succeed in this position. A high level of motivation and energy and strong customer service skills are also required. Appropriate hand tools necessary for services performed. Safe working knowledge of shop tools and equipment such as scanners, electrical diagnostic equipment, A/C recovery equipment, fluid exchange equipment, lift operation, etc. High school diploma or equivalent. Automotive Service Excellence (ASE) and A/C Refrigerant handling certifications are a plus, but not required unless performing A/C or other license required services. Must have a Valid Driver's License. Working Conditions: Must be able to stand on concrete or metal surfaces for extended periods of time. Work in an environment that frequently experiences extreme hot and cold temperatures, loud noises, and exhaust fumes. Lift and move inventory items, trashcans and other work related items (up to 50 pounds). Must be able to stand and move six to eight hours per day. Must be able to push, pull, pull up, bend at the knees and waist, twist body at the waist, raise and hold arms overhead, turn head-neck-shoulders as needed, grasp and hold tools and other items with hands, for either extended periods of time or many times throughout the shift.

Lewis Energy is a privately-owned, exploration and production company. Unlike most E&P companies, we are vertically integrated. As a vertically integrated company, we have incorporated the latest technology which allows us to keep our costs down. Our innovation allows us to continue drilling during hard times when other companies are abandoning their operations. Lewis Energy Group is looking for a highly motivated Heavy Truck Mechanic to join our Service Center team. The Heavy Truck Mechanic will perform preventative maintenance and routine mechanical, electrical, hydraulic, and pneumatic repairs on company assets to include all DOT equipment. Responsibilities * Heavy Duty Maintenance: Performs preventative maintenance on all DOT equipment according to established guidelines and time frames. Keeps accurate and detailed records of failures and repairs in Computerized Maintenance Management System. Acts as an assistant to more senior Mechanics on larger jobs. * Troubleshooting: Troubleshoots and diagnoses routine problems or recurring malfunctions of company assets and chooses course of action. Consults with supervisor to ensure accuracy of diagnosis and approval for work. Completes troubleshooting repairs and/or modifications work on equipment. * Tool Maintenance: Performs daily inspections of tools and equipment used. Ensures cleanliness of hand tools, equipment and parts. Qualifications * High school diploma or general education degree (GED); minimum five years related experience or training; or equivalent combination of education and experience. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. * Bilingual in English and Spanish. Computer Skills To perform this job successfully, an individual should have basic knowledge of computer use and Microsoft Office Suite. Knowledge of CMMS software is a plus. Certificates, Licenses, Registrations Valid Driver License. DOT License is a plus. Other Skills and Abilities Strong communication and time management skills. Ability to work under pressure. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to stand and climb or balance. The employee is occasionally required to sit and and/or smell. The employee must occasionally lift and/or move up to 50 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; high, precarious places and outside weather conditions. The employee is frequently exposed to extreme heat and vibration. The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock. The noise level in the work environment is usually moderate. Top benefits As a team member at Lewis Energy Group, you'll enjoy: * Paid time off * Comprehensive benefits package, including health, vision and dental insurance * Career advancement and bonus opportunities Location Lewis Energy Group is located in Encinal, Texas and is situated along Interstate 35, approximately 40 miles north of Laredo.

Lewis Energy is a privately-owned, exploration and production company. Unlike most E&P companies, we are vertically integrated. As a vertically integrated company, we have incorporated the latest technology which allows us to keep our costs down. Our innovation allows us to continue drilling during hard times when other companies are abandoning their operations. Lewis Energy Group is looking for a highly motivated Heavy Equipment Mechanic to join our Service Center team. The Heavy Equipment Mechanic will diagnose problems and performs complex and/or major mechanical, electrical, hydraulic, and pneumatic repairs on all yellow iron and other oil field equipment. Responsibilities Heavy Equipment Maintenance: Performs all necessary preventative maintenance on heavy equipment according to established guidelines and time frames. Keeps accurate and detailed records of failures and repairs in Computerized Maintenance Management System. Identifies and orders parts necessary to complete repairs and routine maintenance. Performs complex repairs on equipment. Replaces parts and equipment as necessary. Assists lower level Mechanics in completing work assignments as necessary. Troubleshooting: Troubleshoots and diagnoses all problems with yellow iron equipment. Completes troubleshooting repairs and/or modifications work on equipment. Tool Maintenance: Performs daily inspections of tools and equipment used. Ensures cleanliness of hand tools, equipment and parts. Qualifications High school diploma or general education degree (GED); minimum five years related experience or training; or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Bilingual in English and Spanish. Computer Skills To perform this job successfully, an individual should have basic knowledge of computer use and Microsoft Office Suite. Knowledge of CMMS software is a plus. Fleet Management Software is a plus. Certificates, Licenses, Registrations Valid Driver License. DOT License is a plus. Other Skills and Abilities Strong communication and time management skills. Ability to work under pressure. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to stand and climb or balance. The employee is occasionally required to sit and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; high, precarious places and outside weather conditions. The employee is frequently exposed to extreme heat and vibration. The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock. The noise level in the work environment is usually moderate. Top benefits As a team member at Lewis Energy Group, you'll enjoy: Paid time off Comprehensive benefits package, including health, vision and dental insurance Career advancement and bonus opportunities Location Lewis Energy Group is located in Encinal, Texas and is situated along Interstate 35, approximately 40 miles north of Laredo.

Anderson Columbia Co. Inc. is accepting resumes for an Experienced Diesel Mechanic. Since 1958, Anderson Columbia has been an industry leader in paving and road building, making smooth stomping grounds for vehicles of all kinds. We strive to construct roads from the highest quality materials and apply ourselves to ensure the job is done right. From small backstreets to congested highways, we perform jobs of all proportions and create pavement in a way that makes the ride enjoyable. We pride ourselves on being one of the Largest Construction & Aggregate Producing Contractors in Florida. Our sense of professionalism paired with our teams of highly-trained personnel allows us to be successful at every job we employ. Anderson Columbia doesn't just hire employees into a company, we hire people into our family; after all, people are our greatest asset. If you appreciate the feeling of sweat on your forehead, the sense of accomplishment at the end of a long day, or the pride in calloused hands, Anderson Columbia may have a place for you. Pay Rate - Starting at $20+ DOE Requirements - * 3-5 years of experience with both gas and diesel engine repair. * Must have basic set of general tools * Must pass Pre-Employment Drug Screen and Physical. * Must have valid driver's license. * Must have reliable transportation. * Must be willing to work 10-12 hour shifts Monday - Friday, with the occasional Saturday. * Experience utilizing machines/equipment as follows: hand tools, drills, grinders, saws, multimeter, tachometer, welder, cutting torch, hydraulic gear puller, electric forklifts, pallet jacks, and platform lifts. * Special Consideration for applicants who posses CDL Licenses. Responsibilities - * Perform scheduled preventative maintenance on mechanical material handling equipment. * Perform emergency mechanical repairs to failed material handling systems. * Identify and locate required repair parts for failed systems. * Maintain accurate record keeping such as: work orders, time sheets, and parts requests Benefit Packages available after 3 months. * Healthcare, Dental, Eye, Life Insurance, paid holidays. * 401 k after 6 months, with company match program. DFW / EOE Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Lewis Energy is a privately-owned, exploration and production company. Unlike most E&P companies, we are vertically integrated. As a vertically integrated company, we have incorporated the latest technology which allows us to keep our costs down. Our innovation allows us to continue drilling during hard times when other companies are abandoning their operations. Lewis Energy Group is looking for a highly motivated Heavy Equipment Mechanic to join our Service Center team. The Heavy Equipment Mechanic will diagnose problems and performs complex and/or major mechanical, electrical, hydraulic, and pneumatic repairs on all yellow iron and other oil field equipment. Responsibilities * Heavy Equipment Maintenance: Performs all necessary preventative maintenance on heavy equipment according to established guidelines and time frames. Keeps accurate and detailed records of failures and repairs in Computerized Maintenance Management System. Identifies and orders parts necessary to complete repairs and routine maintenance. Performs complex repairs on equipment. Replaces parts and equipment as necessary. Assists lower level Mechanics in completing work assignments as necessary. * Troubleshooting: Troubleshoots and diagnoses all problems with yellow iron equipment. Completes troubleshooting repairs and/or modifications work on equipment. * Tool Maintenance: Performs daily inspections of tools and equipment used. Ensures cleanliness of hand tools, equipment and parts. Qualifications * High school diploma or general education degree (GED); minimum five years related experience or training; or equivalent combination of education and experience. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. * Bilingual in English and Spanish. Computer Skills To perform this job successfully, an individual should have basic knowledge of computer use and Microsoft Office Suite. Knowledge of CMMS software is a plus. Fleet Management Software is a plus. Certificates, Licenses, Registrations Valid Driver License. DOT License is a plus. Other Skills and Abilities Strong communication and time management skills. Ability to work under pressure. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to stand and climb or balance. The employee is occasionally required to sit and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; high, precarious places and outside weather conditions. The employee is frequently exposed to extreme heat and vibration. The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock. The noise level in the work environment is usually moderate. Top benefits As a team member at Lewis Energy Group, you'll enjoy: * Paid time off * Comprehensive benefits package, including health, vision and dental insurance * Career advancement and bonus opportunities Location Lewis Energy Group is located in Encinal, Texas and is situated along Interstate 35, approximately 40 miles north of Laredo.