Engineer jobs in Fairview, PA - 762 jobs

we are seeking a skilled Power Electronics Engineer with strong experience in power electronics design, inverters, and motor control systems. The ideal candidate will have hands-on expertise in hardware design, simulation, prototyping, and testing of power electronic circuits, with a solid understanding of thermal performance and diagnostic instrumentation. Key Responsibilities: Design and develop power electronics front-end circuits and inverter systems Work on IPM motor control and associated power stages Perform simulations and analytical modeling of power electronic circuits Develop and support Hardware-in-the-Loop (HIL) platforms for power electronics validation Design, prototype, and test hardware assemblies Analyze and select inverter switching devices (IGBTs, MOSFETs, etc.) Perform thermal calculations, characterization, and reliability analysis of power structures Conduct hands-on testing using measurement and diagnostic instrumentation Collaborate with cross-functional teams including firmware, mechanical, and systems engineering Support troubleshooting, validation, and design optimization activities Required Qualifications: Bachelor's degree in Electrical Engineering, Electronics Engineering, or a related field 5+ years of experience in power electronics design and development Strong knowledge of inverters, switching devices, and power stages Experience with IPM motor control systems Proficiency in power circuit simulation and analysis Hands-on experience in hardware design, prototyping, and testing Experience using measurement and diagnostic instruments (oscilloscopes, power analyzers, multimeters, etc.) Understanding of thermal design, calculations, and characterization Preferred Skills (Nice to Have): Experience with HIL platforms and validation environments Familiarity with automotive, HVAC, or industrial power electronics systems Knowledge of relevant safety and compliance standards Work Environment: Onsite role based in New Freedom, PA Hands-on engineering lab and prototype development environment

WHO ARE WE? PEG, LLC is in its twenty-eighth year being a diverse energy efficiency, engineering, environmental and management consulting firm operating principally in the Eastern and Central United States. As a leader in Home Energy Ratings, a winner of multiple Energy Star Awards, and a standout in the construction industry, PEG has provided Home Energy Ratings for over 250,000 homes. Our mission is to deliver innovative, data-driven solutions that support high-performance buildings, sustainable development, and client success across residential and commercial sectors. We strive to continually improve building energy efficiency and therefore, the quality of homes and life in the communities that we service. Please visit our website at ************** to learn more about PEG! WHO ARE YOU? PEG is searching for motivated individuals who are interested in learning about Energy Sustainability and Building Energy Performance of New Residential Construction. This position requires you to become a certified HERS Rater. Learn more at ************** In this position, new employees will be provided with paid on the job training that will prepare them to perform Home Energy Audits in accordance with RESNET Guidelines. This will include visual inspections of materials, data collection and visual observation of energy efficient features, and the utilization of equipment to test system performance. THE ROLE Job Location: The geographical area assigned to this position includes a 100-mile radius with Lancaster, PA at its center. Essential Functions: Perform Home Energy Audits in accordance with New Construction RESNET/Energy Star Guidelines including but not limited to: Visual Inspections of applied materials and control assemblies Data Collection and Visual Observation of energy efficient features such as Model and serial numbers of relevant equipment Quality and installation of duct work, insulation, framing, air sealing, ventilation, etc. Utilization of equipment to test system performance such as infiltration & Blower Door Testing, Ventilation Testing, Duct Leakage Testing, and Building Air Flow & Pressure Testing Adjustment of system settings to either meet design or manufacturer specifications Actively develop relationships with builders and code officials through effective and professional communication Prepare an electronic written report of audit findings Complete any necessary paperwork required for internal reporting Maintain equipment in accordance with company policy and manufacturer's specifications Complete all other assigned third-party inspections, as needed, with the designated geographical area Education and/or Experience High School Diploma or General Education Degree or Vocational Certificate in the Skilled Trades Industry is required HERS Rater, Energy Star, Green Building, ACCA 310 HVAC Grading, IECC, HVAC EPA, BPI, and LEED Certifications are a plus! 2 years of work experience in HVAC, home remodeling, or construction is helpful. Physical Demands Must be physically able to fulfill job functions, including lifting up to 50 lbs, carrying equipment, climbing ladders, work in confined spaces (attics/crawl spaces), and using small tools and testing equipment Must enjoy working in the great outdoors Additional Requirements Must be personable, enthusiastic, well-groomed, articulate, and able to convey technical information in plain language Must be adaptable as audit/inspections will fluctuate with client construction schedules. Must be organized, dependable, self-directed, and able to complete projects with limited supervision Must be willing to obtain additional certifications/licenses as required Valid driver's license in good standing with insurable driving record Must have reliable transportation and the ability to travel daily to job sites Must be willing to undergo a background check and/or drug testing, in accordance with local law/regulations Rewards and Benefits PEG LLC offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects our commitment to creating a diverse and supportive workplace. Benefits include: • Company-issued Gas Card, Toll Pass, & Vehicle Maintenance Allowance • Company-issued Uniforms, iPhone/iPad, Field Equipment/Tools/PPE • Flexible Work Schedule • Year Round Employment • Paid Professional Development & Salary Incentives through Learning/Certification Opportunities • 20 Annual Paid Days Off (12 Days of PTO, Birthday PTO, & 7 Company Paid Holidays • Company Sponsored Medical Insurance that includes a contribution of up to 50% off the monthly premium • Dental & Vision Insurance • 401(k) Retirement Plan with up to a 4% company match vested immediately • Basic Life & Supplemental Life • Short-Term & Long-Term Disability • Accident & Pet Insurance • Corporate Sponsored Events • PEG LLC is an Equal Employment Opportunity Employer.

Join our innovative thermal solutions team- named a Best Place to Work in PA! Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Position summary: The Product Development Engineer supports various phases of projects ranging from concept generation and initial design all of the way to final delivery hardware and volume production. The types of projects vary from exploratory trade studies to highly detailed thermal analysis, to the fabrication of complicated prototype assemblies and testing. At any given time, the Product Development Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Candidates that have a strong technical background with hands-on experience fabricating prototype hardware excel at this position. Responsibilities Include: * All aspects of initial product design including: * Innovative concept generation * Excel or hand calculation analytical analysis * 3-D CAD modeling (Solidworks) * CFD/FEA analysis * 2-D Drawing creation * Fabrication procedure and work instruction development * Working cohesively with a diverse group of engineers and technicians * Managing program schedules and budget * Frequent customer communication/interaction Requirements Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. * B.S. or M.S. degree in Mechanical Engineering or Aerospace Engineering. * Proficiency in using commercial CAD (Solidworks), FEA (Solidworks) and CFD software (Autodesk Simulation, Fluent, Comsol) * Hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing is a plus! * Good verbal and written skills. * Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee, or asylee) due to ITAR restrictions. We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer.

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** Mechanical Design Engineers (MDE) at TAIT are responsible for project-based mechanical design work that focuses on specialized machinery, structures, and rigging systems for the entertainment technology industry. MDEs drive innovative technical solutions, while working within TAIT safety and quality processes, as well as leveraging TAIT standard design principles and practices. As part of the wider mechanical design and engineering team, this role will focus on owning specific subsections of projects, which we call elements. This role is a bridge between associate/entry-level roles (which focus on part-level drawings) and senior/experienced roles (which focus on project-level solutions). The MDE team collaborates across departments (project management, fabrication, procurement, field teams) to ensure project success, from "initial concept" through "opening night." **Essential Responsibilities / Accountabilities** + Collaborate with project teams to develop innovative and effective technical solutions that align with project objectives and exceed client expectations. + Plan and execute technical solutions to work within scope, schedule, and budget. + Apply TAIT design best practices to design for fit and finish, manufacturing efficiency, onsite assembly + disassembly, and packaging. + Identify and understand the underlying physics of complex problems to create successful technical solutions. + Identify and prioritize project specific requirements and constraints to drive technical solutions. + Apply TAIT Project Delivery best practices and processes including design reviews, project team meetings, use of planning systems/software, + Participate in client meetings and produce client-facing drawing packages as needed. + Communicate effectively through hand sketches, 2D CAD drawings and cross sections. + Efficiently generate robust and clean 3D models to support TAIT's collaborative design process. + Produce pitch studies, schematics, storyboards, weight studies, and other supporting tasks to advance the design + engineering process. + Identify appropriate timing and scale of prototyping to support design + engineering process. + Recognize aspects of project work requiring engineering rigor to collaborate with internal and external engineering review on assigned project work. + Identify long lead time items and work with purchasing department to procure project specific components and materials. + Use custom TAIT CAD tools as appropriate in design and detailing processes. + Maintain project documentation including drawing redlines and operation manuals as required. + Release assembly and part drawings to be manufactured internal to TAIT as well as through subcontracting vendors using appropriate dimensioning and tolerancing. + Efficiently solve technical issues as they may arise during fabrication, testing, and/or commissioning. + Support legacy TAIT equipment as required by project needs and/or support department requests. + Maintain awareness of standard of solutions within TAIT's markets, product lines, and platforms. + Maintain awareness of TAIT's markets and competition. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Minimum Qualifications** + BA/BS/BFA in technical theater, engineering, architecture, industrial design, product design and 4+ years of experience working in a related technical field **OR** 7+ years of design experience in live entertainment technology or adjacent field + Background in 3D CAD modeling + Working knowledge of live entertainment technology + Experience working in a short-term, project-based environment + Success collaborating as part of a cross-functional team + Ability to be based in the Lititz, PA TAIT headquarters **Preferred Experience** + Parametric modeling, ideally using Autodesk Inventor + Building information modeling (BIM) + Design for manufacture (DFM), especially aluminum structures and electro-mechanical machines + Rigging, especially theatrical rigging, arena rigging, performer flying, or catenary systems + TAIT markets, especially concert touring and theme parks + TAIT technology, especially winches, trolleys, and other overhead machinery/structures **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises. + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions. + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. \#LI-AB TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

Are you looking for a unique opportunity to be a part of something great? Want to join a 17,000-member team that works on the technology that powers the world around us? Looking for an atmosphere of trust, empowerment, respect, diversity, and communication? How about an opportunity to own a piece of a multi-billion dollar (with a B!) global organization? We offer all that and more at Microchip Technology Inc. People come to work at Microchip because we help design the technology that runs the world. They stay because our culture supports their growth and stability. They are challenged and driven by an incredible array of products and solutions with unlimited career potential. Microchip's nationally-recognized Leadership Passage Programs support career growth where we proudly enroll over a thousand people annually. We take pride in our commitment to employee development, values-based decision making, and strong sense of community, driven by our Vision, Mission, and 11 Guiding Values; we affectionately refer to it as the Aggregate System and it's won us countless awards for diversity and workplace excellence. Our company is built by dedicated team players who love to challenge the status quo; we did not achieve record revenue and over 30 years of quarterly profitability without a great team dedicated to empowering innovation. People like you. Visit our careers page to see what exciting opportunities and company perks await! Job Description: Execute & participate in product segment strategy including product positioning Provide design and development guidance to customers for VOP (Vectron Oscillator Products) products to help design in VOP products at our customers Participate in roadmap and product definition Actively promote VOP products into multiple segments through collateral creation and direct customer interaction Coordinate VOP activities related to trade shows with the Microchip Marketing team Coordinate marcom activities for VOP including press releases, eNewsletters, brochures, app notes, social media posts, etc… Develop and maintain market/application focused web assets and assist in other web update/improvement programs Close interaction with the Strategic Marketing, Sales, and Operations teams will be paramount in growing the VOP BU top line revenue Provide training of VOP products, markets and applications to sales, application engineers, reps and distributors Travels within defined territory to visit focus customers and channel partners. Maintains direct contact with customers, reps, and distributors before and/or after the sale. Oversee and perform both demand creation and demand fulfillment based functions related to the sale of VOP products into focus markets. Track and forecast current and future opportunity revenues Coordinate division activities to find and win new reference designs at targeted internal and external partners Follow up internal and external ref design wins with target OEMs and ODMs in region to drive revenue Build value proposition by maintaining in depth knowledge of key customers business, organizational structure, business processes and financial structure and understanding VOP key markets (Aerospace, Defense, Industrial and Communications). Requirements/Qualifications: Required Qualifications: BSEE and 2-3 years of experience in electronics industry Strong communication (verbal and written) and presentation skills Strong people skills and experience in customer-facing position Ability to balance top level market insights with bottom-up analysis to reach conclusions about market direction and dynamics Capable technical abilities Excellent critical thinking skills Driven and dynamic when leading cross-functional teams Self-motivated Preferred Qualifications: Experience in oscillator or timing industry U.S. Export Controls Requirements: This job requires access to technology, materials, software or hardware that is controlled by the export laws of the United States. Candidates are required to provide proof of either US citizenship, Permanent US residency or classification as a protected individual as defined in 8 USC 1324b (a) (3). Travel Time: 0% - 25% Physical Attributes: Hearing, Seeing, Talking, Works Alone, Works Around Others Physical Requirements: 80% sitting, 10% standing, 10% walking, 100% inside Pay Range: We offer a total compensation package that ranks among the best in the industry. It consists of competitive base pay, restricted stock units, and quarterly bonus payments. In addition to these components, our package includes health benefits that begin day one, retirement savings plans, and an industry leading ESPP program with a 2 year look back feature. Find more information about all our benefits at the link below: Benefits of working at Microchip The annual base salary range for this position, which could be performed in the US, is $70,304-$143,000.* *Range is dependent on numerous factors including job location, skills and experience. Microchip Technology Inc is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. For more information on applicable equal employment regulations, please refer to the Know Your Rights: Workplace Discrimination is Illegal Poster. To all recruitment agencies: Microchip Technology Inc. does not accept unsolicited agency resumes. Please do not forward resumes to our recruiting team or other Microchip employees. Microchip is not responsible for any fees related to unsolicited resumes.

Join our Team of Employee Owners! Why work for a company when you can own it? Envirep, a Division of Cummins-Wagner Company, Inc, is a leading manufacturer's representative serving the municipal and industrial water and wastewater markets throughout the Mid-Atlantic region. We represent top-tier equipment manufacturers and provide technical sales, equipment startups, field troubleshooting, and ongoing service agreements. We pride ourselves on our technical expertise, responsiveness, and commitment to customer satisfaction. Job Title: Environmental Applications EngineerDepartment: Envirep Inside Sales DepartmentLocation: Camp Hill, PennsylvaniaReports To: Branch Manager Job Overview Envirep is seeking a highly motivated Environmental Applications Engineer to join our Camp Hill, PA, office. In this role, you'll support our sales and service teams by applying your technical expertise in water and wastewater equipment systems. This is an excellent opportunity for an engineer who enjoys working on diverse projects and collaborating with consulting engineers, municipalities, and contractors. Our most successful Environmental Applications Engineers: Have a strong understanding of mechanical equipment, pumping systems, and process controls Can interpret engineering drawings, specifications, and technical documentation with ease Bring excellent problem-solving skills and sound engineering judgment to every project Are self-starters who thrive working independently and managing multiple priorities Communicate clearly and effectively, both in writing and verbally Stay organized and manage their time efficiently in a fast-paced environment Hold a Bachelor's degree in Environmental Engineering or a related field, or have equivalent practical experience Have experience with water and/or wastewater treatment systems (strongly preferred) Are proficient in Microsoft Office, and familiarity with AutoCAD is a plus Work comfortably with engineers, clients, contractors, and equipment manufacturers Scope of responsibility: Collaborate with consulting engineers, owners, and contractors to support equipment selection and integration. Manage multiple projects from planning through construction, providing technical assistance throughout. Work closely with the sales team to identify customer needs and develop scopes of work. Review project specifications, drawings, and contracts to ensure accuracy and compliance. Prepare detailed budget proposals, pricing quotes, and technical documentation. Create equipment layouts, datasheets, and project specifications. Coordinate with vendors to ensure successful equipment integration and performance. Provide technical support during project commissioning and equipment startup. Identify sales leads, follow up with prospects, and generate budget quotes. Manage project workflow and meet deadlines in a dynamic, fast-paced environment. Perform all other duties as assigned Cummins-Wagner gives back to their employees: Employee Stock Ownership Program Bonus Program Tuition and Certification Fee Assistance 401k Match Flexible Spending Account Comprehensive Health Insurance Life Insurance Short & Long-Term Disability Insurance Our History: Founded in 1960 by "Charlie" Cummins and "Chub" Wagner, Cummins-Wagner began as a one-product, two-employee Company in a one-room office. Without a well-recognized brand product line, their commitment to customer service was the Company's impressive strength. This commitment to customer service allowed the Company to grow and attract significant product lines. Recognizing that ownership inspired the dedication that resulted in their customer-driven business's success, they established an ESOP* and sold the Company to their employees in 1985.Today, the Company's strength comes from the product lines we represent and from the total dedication of over 250 Employee Owners to the principle of customer satisfaction. We appreciate the value of our impressive team and look forward to welcoming you! *As an "ESOP" company with 100% of the common stock universally and exclusively owned by the Employee Stock Ownership Trust (ESOT), employees are motivated to work for the long-term success of the Company to a degree unmatched by those of our competitors. ESOP companies generally outperform non-ESOP companies. For more information on ESOPs, visit *********************** .Cummins-Wagner Co. Inc. is an Equal Opportunity Employer and does not discriminate based on race, sex, age, handicap, religion, national origin, or any other basis prohibited by applicable law.Cummins-Wagner Co. Inc. is a 100% Employee-Owned Company.

Join our Team of Employee Owners! Why work for a company when you can own it? Envirep, a Division of Cummins-Wagner Company, Inc, is a leading manufacturer's representative serving the municipal and industrial water and wastewater markets throughout the Mid-Atlantic region. We represent top-tier equipment manufacturers and provide technical sales, equipment startups, field troubleshooting, and ongoing service agreements. We pride ourselves on our technical expertise, responsiveness, and commitment to customer satisfaction. Job Title: Environmental Applications Engineer Department: Envirep Inside Sales Department Location: Camp Hill, Pennsylvania Reports To: Branch Manager Job Overview Envirep is seeking a highly motivated Environmental Applications Engineer to join our Camp Hill, PA, office. In this role, you'll support our sales and service teams by applying your technical expertise in water and wastewater equipment systems. This is an excellent opportunity for an engineer who enjoys working on diverse projects and collaborating with consulting engineers, municipalities, and contractors. Our most successful Environmental Applications Engineers: * Have a strong understanding of mechanical equipment, pumping systems, and process controls * Can interpret engineering drawings, specifications, and technical documentation with ease * Bring excellent problem-solving skills and sound engineering judgment to every project * Are self-starters who thrive working independently and managing multiple priorities * Communicate clearly and effectively, both in writing and verbally * Stay organized and manage their time efficiently in a fast-paced environment * Hold a Bachelor's degree in Environmental Engineering or a related field, or have equivalent practical experience * Have experience with water and/or wastewater treatment systems (strongly preferred) * Are proficient in Microsoft Office, and familiarity with AutoCAD is a plus * Work comfortably with engineers, clients, contractors, and equipment manufacturers Scope of responsibility: * Collaborate with consulting engineers, owners, and contractors to support equipment selection and integration. * Manage multiple projects from planning through construction, providing technical assistance throughout. * Work closely with the sales team to identify customer needs and develop scopes of work. * Review project specifications, drawings, and contracts to ensure accuracy and compliance. * Prepare detailed budget proposals, pricing quotes, and technical documentation. * Create equipment layouts, datasheets, and project specifications. * Coordinate with vendors to ensure successful equipment integration and performance. * Provide technical support during project commissioning and equipment startup. * Identify sales leads, follow up with prospects, and generate budget quotes. * Manage project workflow and meet deadlines in a dynamic, fast-paced environment. * Perform all other duties as assigned Cummins-Wagner gives back to their employees: * Employee Stock Ownership Program * Bonus Program * Tuition and Certification Fee Assistance * 401k Match * Flexible Spending Account * Comprehensive Health Insurance * Life Insurance * Short & Long-Term Disability Insurance Our History: Founded in 1960 by "Charlie" Cummins and "Chub" Wagner, Cummins-Wagner began as a one-product, two-employee Company in a one-room office. Without a well-recognized brand product line, their commitment to customer service was the Company's impressive strength. This commitment to customer service allowed the Company to grow and attract significant product lines. Recognizing that ownership inspired the dedication that resulted in their customer-driven business's success, they established an ESOP* and sold the Company to their employees in 1985. Today, the Company's strength comes from the product lines we represent and from the total dedication of over 250 Employee Owners to the principle of customer satisfaction. We appreciate the value of our impressive team and look forward to welcoming you! * As an "ESOP" company with 100% of the common stock universally and exclusively owned by the Employee Stock Ownership Trust (ESOT), employees are motivated to work for the long-term success of the Company to a degree unmatched by those of our competitors. ESOP companies generally outperform non-ESOP companies. For more information on ESOPs, visit ************************ Cummins-Wagner Co. Inc. is an Equal Opportunity Employer and does not discriminate based on race, sex, age, handicap, religion, national origin, or any other basis prohibited by applicable law.Cummins-Wagner Co. Inc. is a 100% Employee-Owned Company.

Job DescriptionDescription: Client Solution Architects (CSA) is currently seeking a System Engineer MCIS to support our program at Fort Indiantown Gap, PA For nearly 50 years, CSA has delivered integrated technology and operational support services to meet the defense and federal sector's most complex enterprise needs. Working from operations centers and shipyards to training sites and program offices, CSA deploys experienced teams, innovative tools and proven processes to advance federal missions. This position is contingent upon contract award. How Role will make an impact: Provides system administration and security technical support for training event and exercise end-user items associated with MCIS systems, Government mandated information system infrastructure systems and services, and/or exercise Information System (IS) devices. Cross-trained on simulation systems Requirements: What you'll need to have to join our award-winning team: Clearance: Must possess and maintain an active Secret Clearance. Bachelor's Degree in engineering, science, mathematics, or a related field IAT II Certification 4 years' experience within the past 10 years in planning advanced computer system architectures, supervising implementation of communication systems, and integration of computer systems and interfaces in distributed architectures; 4 years' experience within the past 10 years operating and maintaining infrastructures that include network engineering, Linux and Windows system administration, and storage engineering solutions; 3 years' of experience with U.S. Army MCIS. Why You'll Love this Job: Purpose filled roles that contribute to impactful solutions to advance our federal clients' mission. You may examine doctrine, plans, policies and procedures that will enhance and enrich the training environment, ensuring our warfighters are fully prepared for any challenge. Daily opportunities to develop new skills Team environment What We Can Offer You: Compensation Health & Wellbeing We strive to provide our team members and their loved ones with a comprehensive suite of benefits that supports their physical, financial and emotional wellbeing. Personal & Professional Development We also invest in your career because the better you are, the better we all are. We have specific programs catered to helping you reach any career goals you have - whether you want to become a knowledge expert in your field or apply your skills to another division. Diversity, Inclusion & Belonging We are unconditionally inclusive in the way we work and celebrate individual uniqueness. We know diverse backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good. Benefits Healthcare (medical, dental, vision, prescription drugs) Pet Insurance 401(k) savings plan Paid Time Off (PTO) Holiday pay opportunities Basic life insurance AD&D insurance Company-paid Short-Term and Long-Term Disability Employee Assistance Program Tuition Support Options Identity Theft Program

Electrical Project Engineer Direct Hire Lancaster, PA 65,000.00 - 80,000.00 + Company paid health, vision, and dental insurance Short-term disability, long-term disability, and life insurance/AD&D policies Paid holidays Paid time off 401k with 5% company match Periodic employee performance reviews Bonus Structure Advancement Opportunities Duties and Responsibilities: * Provide technical support to a project team to expose, track, resolve, and notate project issues * Manage all project documents through the document control team * Process and track submittals and RFI's * Assist in the coordination of planning and fabrication activities * Support Procurement in the distribution of bidding documents and tracking of quotations * Maintain project schedule via the Enterprise Scheduling Department * Prepare and issue meeting minutes * Assist with planning and managing site logistics * Implement corporate safety policies on jobsite * Receive, review, and evaluate subcontractor quotations * Assist in the tracking of change orders and cost management * Manage plan review and approval process with local and state municipalities * Process new hire documents and verify accuracy of the site payroll submission * Participate in continuous learning, training, and skill development * Ability to travel and/or temporarily relocate based on project needs * Willingness to work in both office and on-site environments * Perform tasks at the discretion of the project management team Preferred Qualifications * One to three (1-3) years of relevant construction experience * Bachelor's degree in Engineering, Construction Management, or Business Administration or a technical college degree with two (2) years construction experience * Data Center, Healthcare, Automotive, and/or Light Industrial experience * Excellent written and verbal communication skills * Excellent organizational skills and attention to detail * Positive attitude with an aptitude for proactive and team-oriented problem solving * Proficient with Microsoft Office Suite and related construction software * Commitment to Safety Note: Chosen applicant will be subject to a drug screen and Motor Record Vehicle check as a condition of employment. #LI-JJ1

Job Description Key Responsibilities Engineer out Safety hazards CNC program development and improvements for Lathes, VMC, HMC CNC Tooling selection Work holding / Fixture design Implementation of Lean Manufacturing principles Design cost out of manufacturing processes Develop training documentation Minimum Qualifications Bachelor's degree in Mechanical Engineering Minimum 2 years of CNC programming Strong mechanical and machine design skills Proven ability to analyze and improve manufacturing processes Strong organizational, communication, and interpersonal skills Preferred Qualifications 5+ years of engineering experience in a manufacturing environment Experience with 2D/3D CAD software (CREO preferred) Physical Requirements Must have full range of body motion. Certain operations require repetitive bending, squatting, and full arm extension. Manual lifting, not exceeding fifty (50) pounds, may be required. Able to visit various manufacturing environments. Amsted Rail's commitment to Equal Opportunity/Affirmative Action: Amsted Rail is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. To review our EEO Policies or to request assistance please go to *************************** and select EEO Compliance/Statements. To learn more about us, please visit us online at ******************* #ff-dd

You have 15+ years of passenger rail systems experience and a Bachelor's degree in Engineering. You have significant employment experience with a passenger railroad, and/or a consulting engineering firm with a focus on the railroad industry. You are already an expert. Robson Forensic will train you to be a forensic expert. As a Railway Systems Engineering Forensic Expert, you will: Investigate railway systems incidents. Analyze railway systems procedures, applying your comprehensive knowledge of standards and practices. Write clear, scientifically sound reports. Provide expert testimony. You will delve into the "why" behind incidents, critically assessing decision-making, operational procedures, and the standard of care. This role offers you a chance to: Use your cumulative training, experience, and critical thinking skills. Collaborate with highly respected experts. Continuously learn and grow. Make a tangible difference. Requirements: You have a Bachelor's degree in Engineering from an ABET-accredited program. You have a P.E. license or an EIT/FE and can become a P.E. within 6 months. You have 15+ years of hands-on passenger rail systems experience (additional freight experience is a plus). Depth of experience should include some combination of consulting design work, construction, manufacturing, engineering, operations, and/or maintenance of rail operations, rail infrastructure, and/or rolling stock. Breadth of experience should include a working knowledge of some combination of mainline track, rail yards, sidings, stations (above & below grade), terminals, grade crossings, tunnels, bridges, switches, signal systems, power systems (overhead catenary, third-rail), locomotives (diesel, diesel/electric, or electric power), passenger cars, transit cars, freight cars, maintenance-of-way cars/vehicles, rolling stock maintenance, facilities maintenance, maintenance-of-way, Federal Employees Liability Act (FELA), railroad worker safety, track safety, passenger safety, etc. You can work both independently and as part of a collaborative team. You have excellent technical, analytical, writing and communication skills. You are willing to travel about 20% on average. You have a valid driver's license and the ability to drive. Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new domain. Location: Lancaster, PA or Columbus/Dublin, OH areas ABOUT US: Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. We are an Equal Opportunity Employer. HOW TO APPLY: If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

Data-Core Systems, Inc. is a provider of information technology, consulting, and business process services. We offer breakthrough tech solutions and have worked with companies, hospitals, universities and government organizations. A proven partner with a passion for client satisfaction, we combine technology innovation, business process expertise, and a global, collaborative workforce that exemplifies the future of work. For more information about Data-Core Systems, Inc., please visit ***************************** Our client is a roadway system and as a part of their digital transformation they are implementing a solution based on SAP BRIM & Microsoft Dynamics CE. Data-Core Systems Inc. is seeking a Manual Test Engineer - Microsoft Dynamics CE to be a part of our Consulting team. You will participate and effectively contribute to the design, development, and training of both IT and business professionals. You'll provide managerial support for individual initiatives. You will have the opportunity to work with other SME consultants from our existing team. Roles & Responsibilities: Build, implement, and champion quality assurance principles and maintain the quality of delivery Review business requirements and functional specification reviews by reporting any inconsistencies or insufficiencies related to testing Assist with activities in the test plan to ensure that all the objectives are met, and that the solution works as expected Ensure procedures are followed with a high degree of quality in creating user stories, tasks, test cases, and bugs Actively track quality assurance metrics, by preparing queries and reports using ADO functionality Required Skills & Experience: 3 to 5 years of experience as a Manual Test Engineer - Microsoft Dynamics CE Experience in software quality assurance on the following platforms: Microsoft Dynamics CE and SAP Automation tools Experience in Unit Testing, System Integration Testing, User Acceptance Testing, and Performance Testing Bachelor's degree in engineering or a bachelor's degree in technology from a recognized university We are an equal opportunity employer.

**What Software & Information Platforms contributes to Cardinal Health** Information Technology oversees the effective development, delivery, and operation of computing and information services. This function anticipates, plans, and delivers Information Technology solutions and strategies that enable operations and drive business value. Software & Information Platforms manages the technical configuration, design, administration, development, implementation and support of application and information frameworks that the organization's application solutions utilize. This job family partners with Application Development & Maintenance teams and other Information Technology function teams to identify enhancements for platforms and long-term capabilities. This position will support designing, building, and operationalizing large-scale enterprise Business Intelligence platforms and applications using at least two or more technologies like SAP Business Objects, Tableau and Alteryx in both Windows and Linux OS. **What is expected of you and others at this level** + Applies comprehensive knowledge and a thorough understanding of concepts, principles, and technical capabilities to perform varied tasks and projects + May contribute to the development of policies and procedures + Works on complex projects of large scope + Develops technical solutions to a wide range of difficult problems + Solutions are innovative and consistent with organization objectives + Completes work; independently receives general guidance on new projects + Work reviewed for purpose of meeting objectives + May act as a mentor to less experienced colleagues **Responsibilities:** + Design, implement, and support BI platform administration including infrastructure builds, upgrades, performance testing, and ensuring high availability across cloud and on‑premises environments. + Administer and maintain BI platforms (e.g., SAP BusinessObjects, Tableau, Alteryx, Looker, SAS), with demonstrated expertise in at least two technologies. + Provide infrastructure and platform sizing for projects, including hardware, software, and cloud resource planning. + Manage multi‑tier BI environments: configure servers, groups, projects, workbooks, data sources, and secure connections. + Monitor, tune, and optimize performance using both native BI tools and cloud monitoring solutions to ensure scalability and reliability. + Ensure compliance and security standards are met or exceeded, supporting internal controls and external audits. + Collaborate with cross‑functional teams and external partners to deliver solutions, track project progress, and communicate risks and impacts to leadership. + Drive innovation and best practices by conducting proof‑of‑concepts, developing automation frameworks, and standardizing naming conventions, scripts, and coding practices. **Qualifications:** + Bachelor's degree preferred or equivalent work experience preferred + 4-8 years of experience, preferred + Bachelor's degree in related field, or equivalent work experience, preferred + 3+ years of architecture and engineering experience in Data Analytics/Reporting and Data Visualization tools preferred. + 2+ years of hands-on GCP experience in products like Compute Engine, IAM and APIs + Hands-on experience in architecting and designing Business Intelligence platforms in GCP/AWS cloud + Hands-on experience with Business Intelligence technologies like SAP Business Objects and Tableau + Advanced experience in writing complex SQL queries, stored procedures, etc + Experience in connecting analytic applications to GCP data stores such as BigQuery. + Programming languages Python, Java, and frameworks- Spring Boot, Spring MVC, REST API development expertise is a plus + Preferred to have prior experience in Collibra and Atscale. + Experience with CI/CD pipelines such as Concourse, Jenkins is a plus + Google Cloud Platform or any BI tool administration certification is a plus **Anticipated salary range:** $94,900 - $135,600 **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 02/15/2026 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

360 IT Professionals is a Software Development Company based in Fremont, California that offers complete technology services in Mobile development, Web development, Cloud computing and IT staffing. Merging Information Technology skills in all its services and operations, the company caters to its globally positioned clients by providing dynamic feasible IT solutions. 360 IT Professionals work along with its clients to deliver high-performance results, based exclusively on the one of a kind requirement. Our services are vast and we produce software and web products. We specialize in Mobile development, i.e. iPhone and Android apps. We use Objective C and Swift programming languages to create native applications for iPhone, whereas we use Android Code to develop native applications for Android devices. To create applications that work on cross-platforms, we use a number of frameworks such as Titanium, PhoneGap and JQuery mobile. Furthermore, we build web products and offer services such as web designing, layouts, responsive designing, graphic designing, web application development using frameworks based on model view controller architecture and content management system. Our services also extend to the domain of Cloud Computing, where we provide Salesforce CRM to effectively manage one's business and ease out all the operations by giving an easy platform. Apart from this, we also provide IT Staffing services that can help your organization to a great extent as you can hire highly skilled personnel's through us. We make sure that we deliver performance driven products that are optimally developed as per your organization's needs. Take a shot at us for your IT requirements and experience a radical change. Job Description This position is responsible for but not limited to the following: • Maintain and monitor all network, security and computer systems to meet the organization's current and future requirements • Responsible for management, maintenance and architecture of storage, virtualized environment, servers, network devices, and productivity tools • Monitor systems and identify performance issues proactively • Work within strict time frames and elevate incidents within defined timeframes • Test all changes to networks, hardware, software, and hosted applications • Deploy application code through development lifecycle in coordination with development teams • Monitors service delivery compliance to budget, quality standards and customer and business stakeholder requirements • Cater to doing infrastructure coordination related to design and setup activities at different stages of a project • Work with various vendors and service providers to ensure productive environment • Resolve issues and prepare status reviews and reports • Professionally represent the infrastructure team as a technical consultant on projects. • Maintain the necessary project plans and documentation of all system builds and modifications • Interact and coordinate with vendors, suppliers, distributors and contract consultants • Maintain a good working knowledge of current infrastructure and future trends • Maintain good working relationships with all service providers and vendor to ensure that services received meet expected requirements of contract • Determines server sizing and configuration, printer configuration, bandwidth analysis and capacity planning. • Assists in the development of configuration standards. • Installs/configures servers and server software/drivers. • Monitors the availability of updates/upgrades to all server hardware, tests and installs updates/upgrades. • Performs Network Management functions using various management and monitoring tools available including sophisticated network management systems. • Develops procedures and scripts for Service Desk. • Employs Remedy software to report calls and call clearance and change management activities • Places service calls for servers and network equipment. • Work with Client's partners and employees including IT coordinators in deployment activities. • Attend meetings with Client's developers, users, and partners. • Proactively plans for business continuity and disaster avoidance. • Creates/updates disaster recovery plans. • Participates in disaster recovery drills. • Provide all required information to assure a complete and accurate equipment inventory. • Unpack/pack computer equipment. • Perform related duties as required. Competencies and Experience: • Solid technical background in a client/server environment including infrastructure networks, hardware, software and telecommunications • Good knowledge of security as it relates to network and server infrastructure • Experience using automated monitoring tools • Ability to identify incident trends in order to elevate incidents in accordance with standard protocols • Able to gather relevant information systematically to troubleshoot and resolve issues • Ability to analyze network packet captures • Experience with distributed web application hosting • Experience with Microsoft clustering technologies • Experience with multi domain Active Directory forests • Ability to work in a team environment • Good analytical, problem solving and decision making skills • Good attention to detail, testing and documentation • Knowledge of ITIL and industry best practices • Strong virtualization experience using VMWare vSphere • Ability to maintain good working relationships with third party service providers and vendors • Strong oral and written communication skills Qualifications Minimum of a Bachelor's degree in computer science or related field or equivalent as well as a minimum of 3 years' experience or Associates degree in computer science or related field and 4 years' experience. 2. Certifications: MCSE required. 3. Specific knowledge required in the following areas: 4. Microsoft Server Operating Systems, MS IIS, VMware vSphere 5. In-depth knowledge of PC operations, printer operations, file server operations, print server operations, and network operations. 6. Strong knowledge of Windows and Windows products, personal computer software set up and installation, PC connectivity products and PC hardware connectivity. 7. Strong knowledge of enterprise architecture technologies including load balancing, DNS and certificates 8. Working knowledge of Microsoft Office products (Word, Excel, Powerpoint, Access, Visio) 9. Demonstrated ability to establish and meet work schedules within limited time frames and under tight deadlines and a willingness to work off hours as the need arises in support of changes to the LANs and WANs. 10. Effective verbal communication skills are required to work with all levels of the organization including management, vendors, and various PENNDOT personnel. Effective writing skills are required in order to document work performed. 11. Superior interpersonal and customer service skills required including ability to work effectively in a team environment. High level of proficiency in effective problem solving required. Additional Information Regards, Vikas Kumar vikas.kumar(@)360itpro(dot)com

Who we are As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional well-being. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away. This position is not eligible for Visa sponsorship. What we offer Competitive salary Paid vacation/holidays/sick time Comprehensive benefits package including 401K, pension, medical, dental, and vision care - available day one On the job/cross training opportunities Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy What you will do As a Technology Strategy Applications Engineer, you will play a key role in solving challenges for data center designers served by Johnson Controls and enhancing brand awareness in the Data Center Vertical for our products. Reporting directly to the Director of Business Development and Technology Strategy for Thermal Management, you will work closely with the Global Data Center Technical Selling team to create solutions for efficient production of facility water for heat rejection from mission critical facilities. Your primary focus will be Identifying challenges, constraints, and goals of data center designers, and developing tailored solutions for customers. Defining innovative, scalable, and repeatable thermal management solutions which can be applied to numerous phases, sites, or geographies where data centers may be constructed. Given the technical nature of this role, a strong understanding of heat transfer, vapor compression, and vapor absorption systems essential. How you will do it In this role, you will leverage your expertise to: Developing globally applicable reference designs to produce facility water for use in air-cooled, liquid-cooled, hybrid-cooled or methods of cooling in data center facilities. Industry engagement with complimentary thermal system partners and stakeholders to author white papers, case studies, or application guides of the equipment and/or systems needed for facility water production. Engage with the infrastructure design community, such as consulting engineers and in-house mission critical mechanical teams, through industry conferences, expositions and other engagements to design the next generation of cooling architecture for data centers. Provide in-depth technical support and guidance on thermal management (facility water) products internally and externally to the organization. Collaborate internally with R&D, Training, Product Management, and Technical Support teams to ensure market needs are met in alignment with company product strategies. Ensure the necessary design, technical, and marketing tools to support clients with both existing new, and upcoming products. You thrive on building relationships and driving business growth. A natural problem solver, you work independently, manage multiple priorities with precision, and remain proactive in engaging customers and stakeholders. What We Look For Required Minimum 10 years of experience in designing mechanical cooling systems, such as chillers, chilled water pumping and storage systems, or similar industry. Minimum 5 years of experience within data center industry, directly responsible for the design of cooling systems of advanced IT equipment Strong technical knowledge of mission critical cooling systems, their applications and market trends. Exceptional presentation and communication skills, with the ability to influence decision-makers at all levels. Proven track record of understanding and writing product specifications from, or for, end users, consultants, and installers. Experience in strategic planning, marketing, and market research. | Highly developed prospecting skills-ability to identify key decision-makers and stakeholders. Proactive, self-motivated approach-able to work independently while collaborating effectively with internal teams. Strong team-player mindset-cross-functional collaboration is essential for success. Willingness to travel globally as needed. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Role: System Engineer Duration: CTH Interview Type: F2F after Telephonic Skills/Experience : Education Bachelor of Science degree (EE, CS, etc.) Candidates without a Bachelor's degree will NOT be considered Desired Certifications/Key Experience: Microsoft OS Administration Citrix Administration VMware Administration Active Directory Domain Services Proxy Services Technology Eight (8) years of experience with Windows Server 2003/2008 in a large scale Data Center environment with in depth knowledge of: Citrix Administration VMware Administration Domain Services Proxy Services Server administration & performance monitoring Active Directory and Group Policy Objects Microsoft Distributed File System (DFS) Patch management Backup management (Desired: CommVault Backup & Recovery Solutions) Scripting (Examples: Kickstart, Visual Basic, PowerShell, etc.) Recent experience with Windows clustering, Microsoft SQL and Microsoft IIS Thorough understanding and experience with WSUS Understanding of TCP/IP and LAN/WAN connectivity Experience with enterprise class system security requirements and server hardening practices Comprehensive experience with disaster recovery preparedness and recovery exercises Ability to establish and maintain Windows architecture best practices, including procedures, templates and relevant documentation Additional Information All your information will be kept confidential according to EEO guidelines.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

Adept Consulting Services is a growing Pennsylvania IT consulting firm. We manage stable, long-term projects and have been successfully doing so since 1994. We maintain 100% customer satisfaction throughout our client base by engaging skilled, senior consultants who produce results. You will be joining a successful company who values your contribution and rewards success. We are looking for a Senior Business Analyst with experience in insurance, medical, and/or insuretech to work on cutting-edge insurance solutions. The ideal candidate will have a strong understanding of the healthcare and insurance industries, excellent business analysis skills, and the ability to work in a fast-paced, agile environment. This role will involve configuring systems, translating business requirements into actionable data, and supporting both the product and project implementations. You'll work with a cross-functional team of developers, business analysts, and client stakeholders to ensure the success of each project. Requirements Required Skills and Qualifications: 2+ years of experience in Business Analysis, with a strong background in insurance, medical, or insuretech industries. Ability to commute to Harrisburg, PA once a month for in-person PMP Certification or equivalent project management certification. Agile Experience: Proven experience with agile project management and delivery. Strong ability to translate complex business requirements into actionable system configurations and data. Excellent client-facing skills with a strong ability to manage client relationships. Ability to manage project scope, requirements gathering, and system configurations in a fast-paced, dynamic environment. Technical proficiency: Familiarity with cloud-based insurance software solutions and data management systems. Strong communication skills, both written and verbal. Ability to work independently in a remote environment and manage tasks efficiently. Preferred Skills: Experience working with modern insurance cloud solutions and insuretech platforms. Knowledge of the medical industry and healthcare regulations. Benefits 401(k) Dental insurance Health insurance Paid time off Retirement plan Vision insurance STD/LTD Accidental Dismemberment

Facilities Engineer with primarily responsibility for the planning and implementing a strategy aimed at maintain and improving the Lancaster GMP facility infrastructure. Focus on preparing and owning the site multi-year infrastructure plan, capital and expense projects, developing investment business cases, preparing scopes of work, leading project design teams, interfacing with internal customers to develop conceptual plans/designs and user requirements, partnering with site business leaders in identifying key infrastructure initiatives related to: regulatory compliance, energy management, utility systems, building structures, security infrastructure, grounds, building automation systems, etc. Ensure projects meet all critical -to -quality commitments in the areas of quality, schedule, and cost. Interface with the plant maintenance and engineering associates on projects requiring coordination with the manufacturing and in many cases assume the role of the site technical lead for nonmanufacturing related systems. Ensure compliance with the EH&S, OSHA, FDA and any other regulatory agencies, to include building costs Qualifications Education: 2-5 years with BS 0-3 years with MS Experience: 1-3 years experience, or equivalent knowledge and skills, necessary to satisfactorily perform the position responsibilities. Prefered Hours: 8am-430pm Additional Information