Engineer jobs in Poughkeepsie, NY - 141 jobs

We are seeking a qualified Transit Project Lead (Engineer or Planner) with ten (10) plus years' experience to become a part of our established Transit Group for our Albany, Poughkeepsie, Syracuse or White Plains Offices. This position will work on a variety of projects and interact with traffic engineers, highway engineers, transportation planners and our clients. Projects generally focus on bus related planning and infrastructure, and can include transportation and transit planning, station design, highway design, facilities and site design, alternatives analysis and concept development, and construction coordination. The position may require efforts outside normal business hours to travel, meet client requests and/or attend meetings. A background and a desire to improve our public transportation systems is a plus. Responsibilities include: Investigate options to improve efficiency in bus service and make recommendations for network redesign and planning Bus rapid transit experience Evaluate bus operations to identify opportunities to reduce overhead costs, Design bus facilities including maintenance yards and bus stops Lead intermediate and limited complex transportation planning, and/or engineering assignments in this field. Lead or assist with multidisciplinary projects involving architecture, mechanical and structural engineering disciplines Prepare conceptual plans, graphics and documents. Lead project and/or public meetings. Responsible for report writing for all related projects. Represent the organization in communications and conferences pertaining to broad aspects of Public Transportation related planning and/or engineering assignments. Assume client relations and financial responsibilities for routine projects. Develop and/or review project documents for scope, conformity and quality. Work with accounting to complete monthly invoicing for projects. Assist with project management duties - staffing, scope, schedule and budget development Assist with business development activities, including proposal preparation Check planning and designs prepared by others Direct coordination with clients Job Requirements: 10+ years of experience in a similar role. A professional licensure and/or certifications in related planning and engineering disciplines. (AICP, PE) The candidate must have experience working on public transportation projects in some capacity, preferably with New York State public transportation authorities and FTA experience a plus. Active member of a professional practice organization. Pay Range: Albany/Syracuse, NY: $48/hour - $62.50/hour Poughkeepsie, NY: $52/hour - $68/hour White Plains, NY: $55/hour - $72/hour Pay is based on applicant's ability/experience and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. #INDHP Qualifications EducationBachelors of Engineering (required) Licenses & CertificationsDriver's License (required) Professional Engineer (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Photronics Inc. Established in 1969 Largest Global Photomask Supplier Reputation of Service Excellence Department of Defense Trusted Our People Make the Difference Join our family and grow with us! Photronics Inc's photomask fabrication facility in Brookfield, CT, is looking for a hands-on Equipment Engineer to join our team. Our technology enables hi-tech companies to create next generation semiconductors. If you are looking to join an engaging, rewarding, collaborative, and friendly working environment in a highly technical operating setting, we want to hear from you! Qualifications 1-2 years of experience in a similar job function. Excellent diagnostic and troubleshooting skills for process/equipment tool sets. Experience in the preventative maintenance of tool sets. Ability to handle multiple projects simultaneously. Computer hardware/software experience a plus. Able to read and interpret electrical schematic diagrams. Optical alignment experience a plus. Competent with a DVM and Oscilloscope. Education/Experience A Bachelor's degree in a technical discipline such as Electrical, Electronics, or Electro-Mechanical Engineering is required. Candidates with an Associate degree in a related technical field will also be considered for an Equipment Engineering Technician role. Hands on experience fixing/repairing equipment is required. Cleanroom experience a plus. Competitive Benefits Health Insurance Dental Insurance with Orthodontia option Vision Insurance Basic Short- and Long-Term Disability Enhanced Long Term Disability 401 (k) plan with company match Employee Stock Purchase Plan Annual Bonus Program Health benefits are eligible the first of the month after date of hire Please note: This facility is a secure site subject to International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). As such, all candidates must be U.S. persons as defined by these regulations (U.S. citizens, lawful permanent residents, or protected individuals under 8 U.S.C. 1324b(a)(3)) and legally authorized to work in the United States. Photronics is an equal Opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability status, sexual orientation, gender identity and expression, pregnancy, protected veteran status, or any other classifications protected by law. This includes providing reasonable accommodation for team members' disabilities or religious beliefs and practices. Photronics is an E-Verify company.

Job Description Entry-Level Field Engineer The successful candidate for this entry-level position will be assigned to work on a project site, under the supervision of the Project Manager and Superintendent on the job. Responsibilities include the following: Survey layout of control lines and establish various locations in relation to property lines. Interpret drawings and assist construction supervision and trades personnel in maintaining adherence to locations, dimensions and specifications. Perform as-built survey of work in place, including generating electronic records. Estimate quantity of materials and related items for various aspects of the work. Quality control oversight of the work of various trades as required by project specifications. Work with and assist subcontractors in following drawings, specifications, quality standards, and in coordinating details of scheduling. Maintain effective communication with construction supervision, architects, and engineers. Execute company safety requirements including daily site inspection for conformance with the company safety policy and OSHA standards Maintain project records and manpower reports. Update contract documents to reflect all supplemental information issued by the design team. Requirements: A four year degree in Construction Management, Civil Engineering or related curriculum $70,000.00 annually for Field Engineers Field Engineer Pay$70,000-$75,000 USD

onsemi is seeking a Lead RTP Equipment Engineer in a 300mm automated line, Hopewell Junction, NY. Will guide training and troubleshooting on AMAT Vantage and Centura systems. **onsemi** (Nasdaq: ON) is driving disruptive innovations to help build a better future. With a focus on automotive and industrial end-markets, the company is accelerating change in megatrends such as vehicle electrification and safety, sustainable energy grids, industrial automation, and 5G and cloud infrastructure. With a highly differentiated and innovative product portfolio, onsemi creates intelligent power and sensing technologies that solve the world's most complex challenges and leads the way in creating a safer, cleaner, and smarter world. **More details about our company benefits can be found here:** ********************************************** We are committed to sourcing, attracting, and hiring high-performance innovators, while providing all candidates a positive recruitment experience that builds our brand as a great place to work. **onsemi** is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, ancestry, national origin, age, marital status, pregnancy, sex, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, gender identity, gender expression, or any other protected category under applicable federal, state, or local laws. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact ***************************** for assistance.

Under general supervision of the Section Manager of Transmission & Substation Engineering, provides engineering design and support, requiring design, engineering and project management skills, as well as significant individual intuition. The scope of responsibilities involves the design, coordination, oversight and construction of overhead transmission systems and electric substations for the Company. The Senior Project Engineer shall also provide unprecedented participation and representation for the Company at industry meetings. Required Education/Experience Bachelor's Degree Civil, Mechanical or Electrical Engineering and 8 years of engineering work experience or applicable utility experience is required. Engineering design, construction management or project management specific to transmission and substation projects is required. Preferred Education/Experience Master's Degree Civil, Mechanical or Electrical Engineering and 6 years of engineering work experience or applicable utility experience is required. Relevant Work Experience Familiarity with electrical systems and electric overhead transmission and substation construction. Required Proficient in the design of electric overhead transmission and substation components. Required Understands construction and operation of a modern electric power system. Required Must be well organized, detail oriented and flexible to handle multiple assignments and deadlines. Required Must possess excellent oral and written communication skills, and have the ability to effectively interact with customers, support staff, and various levels of management. Required Must have strong analytical, technical and interpersonal skills. Required Must have demonstrated the ability to work on a team with other employees. Required Computer literacy with proficiency in Windows environments is required Microsoft Office Word, Excel, Access, PowerPoint and Project. Required Must show ability to apply good individual judgment, initiative, creativity and decision making in the handling of assignments. Required Licenses and Certifications Driver's License Required Other: P.E. License Preferrederred Preferred Other: Engineer-In-Training Preferred Additional Physical Demands Must be able to respond to Company emergencies by performing a System Emergency Assignment to restore service to our customers. Must be able and willing to travel to and within the Corporate service territory and for occasional out-of-area business meetings/conferences. Core Responsibilities Serve as Project Engineer for Overhead Transmission or Substation Projects. Prepare material, equipment and construction labor specifications for overhead transmission and substation construction projects. Provides exceptional support to Section Manager. Understand and implements engineering practices such as site planning, layout, grading, drainage, roadways as related to electric substation and overhead transmission facilities. Prepare white papers, obtain capital rulings, develop project budgets and prepare appropriations. Provide technical reviews of specifications, drawings, contracts, addendums, and other construction documents to ensure constructability and compliance with Orange and Rockland standards and specfications. Maximize diagnostic tool application such as MS Project, as well as other financial and project management tools used by Transmission & Substation Engineering to effectually oversee construction projects. Avidly review, analyze and prepares layouts and preliminary designs for each project to determine best practices and designs. Achieve preliminary engineering cost estimating and creatively develop project design alternatives as necessary. Serve as Project Engineer for all assigned overhead transmission and substation engineering projects while managing lower level engineers, consultants and contractors. Work closely with manufacturers, contractors, and suppliers relative to their proposals, project performance, specification of materials, and processing of invoices for payment in accordance with their performance under contract. Provide technical review of construction documents (layouts, specifications, drawings, addendums, contracts, etc.) for constructability, design criteria, cost and schedule. Coordinate activities of field personnel with contractors and/or other departments. Maintain a strong field presence by monitoring construction activities. Collaborate with the Real Estate Department to acquire property and easement rights for substation and transmission projects. Formulate sketches to be used as the design guide for the Design Drafters in the preparation of standards and project construction drawings. Track project expenses using Oracle BI-Business Intelligence Application. Forecast monthly capital and O&M project budgets. Provide departmental updates on the current status and progress of projects, including the update of the Living Budget. Keeps informed and up to date of the latest industry standards and developments in the overhead transmission engineering and construction field. Attends departmental meetings and serves on committees as required. Participate in the Companys Emergency Response Plan through a designated storm assignment. Performs other related assignments as required.

**Job ID: 113252** The Leonardo DRS Naval Power Systems business is a trusted provider of innovative naval gas and hybrid power systems, control technology and support solutions for the U.S. Navy and navies around the world. The candidate hired for this position will be part of the Test Engineering department, and partner with technical experts throughout the company to be accountable for understanding customer needs and providing meaningful, proactive technical solutions. The Hardware Test Engineer will perform requirements analysis, design, implementation, integration, verification, and validation for automated test equipment, manual test program sets, as well as embedded diagnostic test applications. Job responsibilities include the ability to generate and/or modify test procedures and test reports, and develop test fixtures for systems, assemblies, and circuit card assemblies. **Job Responsibilities** + Work hands-on with embedded military instrumentation and control systems to develop effective test strategies. + Design test setups-fixtures, equipment, cables, and components-to support qualification and production testing. + Write and execute test procedures, run product qualification tests, and document results in clear test reports. + Collaborate in design reviews by providing Design-for-Testability input and evaluating supplier components and subsystems. + Support Manufacturing Test through training and troubleshooting, proactively driving issues to resolution. + Manage your tasks with accountability-providing schedule, cost, and progress updates while delivering on technical requirements. + Communicate clearly, work well both independently and with cross-functional teams, and contribute to continuous improvement. **Qualifications** - Bachelor's degree in Electrical Engineering or Computer Engineering - 0-2 years of electrical or test engineering experience (internships, co-ops, and project work welcome) - Motivated, hardworking, and eager to learn in a fast-paced engineering environment - Strong communication and teamwork skills to collaborate effectively across engineering teams - Comfortable using Microsoft Office tools (Word, Excel, Visio, PowerPoint) for documentation and presentations - Ability to multitask and contribute to several projects or issues in parallel - Exposure to agile development practices and tools such as Jira - Familiarity with modeling or simulation tools (e.g., MATLAB, Simulink, Cameo) - Experience or coursework supporting manufacturing processes (purchasing, quality, test, or manufacturing engineering) - Interest or foundational experience in developing automated test and measurement systems (e.g., NI LabVIEW, TestStand) U.S. Citizenship required. This position requires an active DOD security clearance or the ability to obtain such clearance within a reasonable time after commencement of employment. _Taking care of our people is a top priority at Leonardo DRS. We are proud to offer competitive salaries and comprehensive benefits, including medical, dental, and vision coverage, a company contribution to a health savings account, telemedicine, life and disability insurance, legal insurance, and a 401(k) savings plan. We champion wellness programs that focus on physical, emotional, and financial well-being. We develop our talent by offering programs and activities to support career-growth, professional development, and skill enhancement. And we understand there is more to life than work, and the importance of offering flexible work schedules with our 9/80 program, competitive vacation, health/emergency leave, paid parental leave, and community service hours._ _*Some employees are eligible for limited benefits only_ _Leonardo DRS, Inc. and its subsidiaries provide equal opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, protected veteran status, or any other characteristic protected by federal, state, or local laws._ _\#NPS_

Willdan Energy Solutions, a subsidiary of Willdan Group Inc., is seeking a motivated Commissioning Project Engineer to support our building commissioning and sustainability consulting services. This position plays a critical role in ensuring reliable facility operations, energy efficiency, and compliance with LEED and agency standards. The ideal candidate is organized, dependable, communicates proactively, and can manage multiple assignments across different locations. The position will be assigned with our Hudson Valley, NY office but the responsibilities will be primarily associated with the NYC, Westchester and Hudson Valley region. Willdan has several offices located in these areas and the actual office location would be flexible based on the individual. We are looking for someone with exceptional communication skills, ability to handle multiple projects at the same time, work independently, communicate effectively and in a timely fashion with managers, team members and clients, and can travel within the tri-state area. This individual will have a bachelor's degree in an Engineering discipline and/or equivalent experience to provide the services required for this position. Essential Duties and Responsibilities * Conduct on-site inspections and performance testing of mechanical and HVAC systems. * Develop and manage commissioning documentation and testing procedures. * Coordinate with internal teams, clients, and project stakeholders to maintain schedule alignment. * Provide timely status updates and raise issues proactively to supervisors and project teams. * Contribute to process improvement initiatives and support technical documentation. * Maintain clear communication and follow-through on assigned tasks with minimal supervision. * Travel throughout New York State and the tri-state area as needed. * Additional duties may be assigned based on evolving project and business needs. * All Willdan employees are expected to follow company policies and procedures, whether those policies and procedures are established in writing or in practice. All Willdan employees must adhere to the highest of ethical standards, respect and cooperation in the workplace and focus on delivering a world-class experience to internal customers and all Willdan clients and business partners. Job Requirements / Qualifications * Bachelor's degree in Engineering (Mechanical, Electrical, or related field). * At least 3 years of experience in a technical or building systems environment (HVAC operations, commissioning, or similar), beyond graduation. * Training in HVAC, building systems, or energy-related disciplines is a plus. * Certifications such as LEED, ACP, CCP (BCxA), or CBCP (AEE) are a plus. * Demonstrated ability to manage deadlines, prioritize tasks, and communicate effectively. * Experience managing multiple tasks across multiple projects. * Strong written and verbal communication skills. Must clearly report progress and ask questions as needed. * Proficiency in Microsoft Office Suite and other project management tools. * Self-motivated with the ability to adapt quickly, multitask, and work both independently and collaboratively. * Eager to learn about complex systems (e.g., boilers, pumps, controls, BMS). * Deliver high-quality, professional work products and reports. * Communicate clearly, consistently, and on time with project teams and clients. * Comply with company policies and uphold safety, respect, and ethical standards. * Take ownership of tasks and contribute positively to team dynamics. * Meet deadlines reliably and escalate obstacles or delays in advance. * Takes a proactive approach to safety in the workplace for all Willdan Energy Solutions, Willdan Group, Inc. operations, subsidiaries, offices, company worksites, client/affiliate worksites, while traveling on behalf of the company and while working remotely. EEO Non-Discrimination and ADA Reasonable Accommodation Statement Willdan is an equal opportunity employer. Applicants are considered for all positions without regard to race, religious creed, color, age marital status, sex, sexual orientation, gender identity, gender expression, citizenship status, national origin, ancestry, religion, military service or veteran status, disability, medical condition, childbirth and related medical conditions, genetic testing, reproductive status or any other classification protected by federal, state or local laws and ordinances. Willdan does not discriminate on the basis of physical or mental disability where the essential functions of the job can be reasonably accommodated. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. If you need reasonable accommodation for any part of the application and hiring process, please notify us. Willdan Energy Solutions participates in E-Verify.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will You Do: The Pratt & Whitney Hot Section Module Center Manufacturing Engineering Organization is seeking a highly motivated individual to support the production of turbine airfoils. Responsibilities: Day-to-day leadership, direction & coordination of Pratt & Whitney support organizations and suppliers focusing on application of advanced coating systems Process development, staffing and training, as well as the installation and startup of advanced coating equipment, which includes surface preparation and overlay coating finishing equipment Create technical requirements and optimize process parameters required to support the overlay coating processes Support and setup of the organizational infrastructure within the manufacturing environment ranging from business data collection and design of suitable metrics to characterize plant performance, to the operational details of material and part flow during the advanced coating process Policy creation and deployment in the areas of EHS, lean manufacturing, quality, cost reduction, and customer satisfaction Keep current on status and recent developments in the plant / industry / profession Embrace CORE, promote principles and contribute to achieving/maintaining goals as a team Ensure World Class safety culture is maintained and respond to all EH&S requirements promptly Promote corporate code of ethical standards and business practice and company policies Qualifications You Must Have: Bachelor's Degree in Industrial, Materials Science, Mechanical, or Chemical Engineer /5+ years related experience (a comparable combination of education & experience will be considered) Experience with thermal barrier coatings (Electron Beam Physical Vapor Deposition-EBPVD) or plasma spraying process (Air Plasma Spray-APS) a plus Six Sigma green or black belt training and/or lean manufacturing training a plus Excellent customer service skills required providing a high level of service to satisfy/fulfill internal or external needs accurately in a timely manner Ability to work in a high energy, fast paced manufacturing environment with the ability to adapt to changing business conditions U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract Learn More & Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? **What You Will You Do:** The Pratt & Whitney Hot Section Module Center Manufacturing Engineering Organization is seeking a highly motivated individual to support the production of turbine airfoils. Responsibilities: + Day-to-day leadership, direction & coordination of Pratt & Whitney support organizations and suppliers focusing on application of advanced coating systems + Process development, staffing and training, as well as the installation and startup of advanced coating equipment, which includes surface preparation and overlay coating finishing equipment + Create technical requirements and optimize process parameters required to support the overlay coating processes + Support and setup of the organizational infrastructure within the manufacturing environment ranging from business data collection and design of suitable metrics to characterize plant performance, to the operational details of material and part flow during the advanced coating process + Policy creation and deployment in the areas of EHS, lean manufacturing, quality, cost reduction, and customer satisfaction + Keep current on status and recent developments in the plant / industry / profession + Embrace CORE, promote principles and contribute to achieving/maintaining goals as a team + Ensure World Class safety culture is maintained and respond to all EH&S requirements promptly + Promote corporate code of ethical standards and business practice and company policies **Qualifications You Must Have:** + Bachelor's Degree in Industrial, Materials Science, Mechanical, or Chemical Engineer /5+ years related experience (a comparable combination of education & experience will be considered) + Experience with thermal barrier coatings (Electron Beam Physical Vapor Deposition-EBPVD) or plasma spraying process (Air Plasma Spray-APS) a plus + Six Sigma green or black belt training and/or lean manufacturing training a plus + Excellent customer service skills required providing a high level of service to satisfy/fulfill internal or external needs accurately in a timely manner + Ability to work in a high energy, fast paced manufacturing environment with the ability to adapt to changing business conditions + U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract **Learn More & Apply Now:** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

One of the world's most iconic brands, Duracell is the world's #1 battery and personal power company with over $2.4 billion in annual sales. In 2016, we joined Berkshire Hathaway, a U.S. multi-national conglomerate of holding companies. Berkshire is led by Warren E. Buffet, one of the world's most famous investors and business leaders. The company employs 365,000 people and ranks #3 in Fortune's 500 Most Admired Companies. The role will have technical responsibility for the coordination and execution of Projects involving device testing, device characterization and technical support for device-based claims. Education BS in Electrical Engineer, Computer Science or equivalent degree OR Relevant Associates Degree with minimum 3 years of work experience in electrical testing and/or programing Skills Familiar with electrical test instruments such as: DC Power Supply, Multimeter, Oscilloscopes, Lux meter, NI cDAQ and DC Power Analyzer, MACCOR etc. Basic knowledge on at least one of following programing: VB, C++, Java, Python etc. Experience on electrical design and development such as PCB layout, circuit design/debugging Intermediate level of using Microsoft Office tools Problem solving, and organizational skill Strong presentation skills Project management experience is preferred Experience in design, configure and deploy data acquisition and control systems will be a plus As an electrical/device specialist, this role response to: Work with regional R&D team and commercial team to establish business strategies for regional/global initiatives (claim and demonstration) Deliver device-based testing and data to identify Duracell product performance advantages Plan and setup consumer study to understand consumer relevant benefit to support regional claims Utilize hands-on engineering skills to develop test methods, conduct tests and write technical reports Examine needs on new equipment, calculate costs and help preparing budgets Hardware development and troubleshooting Other duties as assigned

H2M Architects + Engineers is a multi-disciplined professional consulting and design firm. With a long history of client service, we consistently meet tough architectural, engineering, and environmental challenges head on. Our firm has helped design and build many communities. At H2M, we're more than just the services we provide. We are a team of over 500 professionals with the knowledge, ability, and desire to create something truly impressive.We are seeking a Staff Engineer with 0 to 2 years of experience to join our Civil Engineering Department. Job Responsibilities: Under the guidance of Senior Engineers this candidate will: Perform design, computations, and evaluations associated with civil/site, municipal & land development projects. Develop construction documents and specifications for a full range of public and private sector civil engineering projects. Prepare due diligence and site feasibility studies. Perform site investigations to assess and document field conditions. Respond to and address regulatory comments to obtain agency approvals. Perform project administration including gathering information, drafting proposals, drafting correspondence, tracking project costs, and preparing reports. Collaborate with other disciplines within the firm. Conduct field inspections at construction sites and interact with contractors. Education and Qualifications: Bachelor's Degree in Civil or Environmental Engineering or closely related discipline. Strong computer skills including AutoCAD and Civil 3D, Microsoft Office Applications and Photoshop. 0 to 2 years design experience with a specific focus on civil/site and municipal engineering projects. Knowledge of civil engineering principles and practices of related technical areas. Team-spirited and self-motivated. Focused and eager to learn. Excellent verbal and written communication skills. EIT desired. The salary range for this role is $72,500 - $85,000 annually. The employment offer may deviate from the published range based on a variety of factors, including but not limited to, experience, specialty, knowledge, education, geography and/or related certifications - not related to any applicant's characteristics protected by local, state or federal law. Note: The salary or hourly rate indicated does not include other forms of compensation or benefits.

Photronics Inc. Established in 1969 Largest Global Photomask Supplier Reputation of Service Excellence Department of Defense Trusted Our People Make the Difference Join our family and grow with us! Photronics Inc's photomask fabrication facility in Brookfield, CT, is looking for a hands-on Equipment Engineer to join our team. Our technology enables hi-tech companies to create next generation semiconductors. If you are looking to join an engaging, rewarding, collaborative, and friendly working environment in a highly technical operating setting, we want to hear from you! Qualifications * 1-2 years of experience in a similar job function. * Excellent diagnostic and troubleshooting skills for process/equipment tool sets. * Experience in the preventative maintenance of tool sets. * Ability to handle multiple projects simultaneously. * Computer hardware/software experience a plus. * Able to read and interpret electrical schematic diagrams. * Optical alignment experience a plus. * Competent with a DVM and Oscilloscope. * Education/Experience A Bachelor's degree in a technical discipline such as Electrical, Electronics, or Electro-Mechanical Engineering is required. Candidates with an Associate degree in a related technical field will also be considered for an Equipment Engineering Technician role. Hands on experience fixing/repairing equipment is required. Cleanroom experience a plus. Competitive Benefits * Health Insurance * Dental Insurance with Orthodontia option * Vision Insurance * Basic Short- and Long-Term Disability * Enhanced Long Term Disability * 401 (k) plan with company match * Employee Stock Purchase Plan * Annual Bonus Program * Health benefits are eligible the first of the month after date of hire Please note: This facility is a secure site subject to International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). As such, all candidates must be U.S. persons as defined by these regulations (U.S. citizens, lawful permanent residents, or protected individuals under 8 U.S.C. 1324b(a)(3)) and legally authorized to work in the United States. Photronics is an equal Opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability status, sexual orientation, gender identity and expression, pregnancy, protected veteran status, or any other classifications protected by law. This includes providing reasonable accommodation for team members' disabilities or religious beliefs and practices. Photronics is an E-Verify company.

This position is responsible for reviewing, planning and monitoring incoming special bearing design requirements and providing technical support and assistance both internally and externally. ESSENTIAL FUNCTIONS OF THE JOB: Provide technical support to the Sales force in the areas of bearing design, design improvements, customer support, production support and review of new applications. Works with customers to resolve technical problems and makes technical presentations with the Sales Engineers at target accounts. Review of new applications and provide technical solutions to ensure product performance. Responsible for the conceptual design engineering of new products, special products and contribute to the improvement of existing products and manufacturing methods to meet customer demands. Technical consultant on product design, application and service problems, quality deviations and material and parts substitution. Assists in the technical education of sales trainees and personnel of other departments. Functions as an engineering consultant to manufacturing on problems related to the manufacture of the company's products. Provides product design requirements to product designers assigned to specific projects and assures that all detail process step drawings are in conformance to the requirements and technical specifications. Establishes bearing testing requirements and test plans and reports test results to customers to gain product approval. Responsible for establishing new products into the MRP AS400 system and creating the associated Bill-of-Material. Responsible for approving new product designs and releasing designs to manufacturing Supports lean enterprise activities in support of API Plant objectives. EDUCATION: • Bachelor's degree with major in engineering field required EXPERIENCE: • 3-10 years as Mechanical Engineer or related experience. • Bearing experience is preferred. • Strong mechanical aptitude. SKILLS / CERTIFICATIONS: • Bachelors Degree in an engineering field. Mechanical Engineering preferred. • US citizenship is required. • Strong mechanical aptitude. • Excellent communication skills, capability to interact with customers. • Proficiency with Microsoft Office Programs. • Travel Approximately 15% RBC Bearings is an Equal Opportunity Employer

We are seeking a hands-on, results-driven Manufacturing Project Engineer to support the seamless transition of new products and equipment from development into full-scale production within our regulated medical injection molding and assembly facility. This role is critical for driving process excellence, scalable manufacturing, regulatory compliance, and cost-effective operations. The ideal candidate combines strong technical expertise, practical project execution skills, cleanroom experience, and a continuous improvement mindset to manage NPI product launches, equipment transfers, process validations, and cleanroom/building projects. Key Responsibilities Project Leadership & Equipment Integration Lead manufacturing engineering activities for new product introductions (NPI), equipment integrations, and production ramp-up from concept through validation. Plan and coordinate transfer of existing machines or installation of new equipment, including proper setup, qualification, and documentation. Manage project timelines, deliverables, and risk mitigation strategies to ensure on-time, in-spec, and in-budget launches. Coordinate cross-functional teams, ensuring design for manufacturability (DFM) and smooth technology/equipment transfers. Facilitate manufacturing readiness reviews and support customer communications as needed. Process Design & Optimization Develop, optimize, and scale injection molding and downstream assembly processes (e.g., ultrasonic welding, pad printing, packaging) for consistent quality, efficiency, and cost-effectiveness. Apply Lean principles, root cause analysis (5-Whys, Fishbone), and statistical tools to reduce waste, variability, and operational costs. Identify and implement process improvements and cost reduction initiatives without compromising quality or compliance. Tooling & Equipment Management Oversee the specification, procurement, installation, setup, validation, and maintenance of molds, jigs, fixtures, and custom equipment. Collaborate with toolroom personnel and external vendors to manage tooling performance, modifications, and preventative maintenance. Support mold qualification and equipment performance verification to ensure sustained reliability. Cleanroom & Facility Projects Serve as subject matter expert (SME) for cleanroom and controlled environments. Lead or support the design, build-out, and qualification of new cleanrooms, molding areas, and assembly areas. Ensure compliance with cleanroom classifications, gowning practices, material flow, and contamination controls. Conduct cleanroom qualification/requalification (IQ/OQ/PQ) and maintain environmental monitoring programs (particulates, temperature, humidity, differential pressure). Provide training for operators and staff on cleanroom procedures, contamination control, and safe operation practices. Documentation & Training Create and maintain process flow diagrams, work instructions, SOPs, validation protocols, and project documentation. Lead operator training and knowledge transfer for new or revised manufacturing processes. Ensure all documentation meets regulatory, customer, and quality system requirements. Compliance & Validation Develop and execute process validation protocols (IQ/OQ/PQ) in alignment with FDA, ISO 13485, GMP, and internal quality standards. Ensure all processes and equipment are audit-ready and meet regulatory compliance requirements. Cross-Functional Collaboration Partner with Program Management, Quality, Operations, Supply Chain, and Tooling to ensure smooth product launches, equipment transfers, and process readiness. Collaborate during design reviews, DFM assessments, and risk analyses. Support customer communications and technical discussions related to manufacturability, validation, and production readiness. Continuous Improvement Drive Kaizen and Lean initiatives, leading root cause investigations and implementing sustainable Corrective and Preventive Actions (CAPA). Utilize statistical tools and data-driven decision-making to improve process capability, reduce scrap, and enhance efficiency. Contribute to a culture of accountability, problem-solving, and innovation across the manufacturing floor. Qualifications Education Bachelor's degree in Manufacturing, Mechanical, Industrial, or related Engineering discipline. Experience 3-7 years in manufacturing engineering, process development, or project engineering in medical device, injection molding, or other regulated industries. Demonstrated experience in NPI, equipment/machine transfers, process validation, and cleanroom/facility projects. Technical Proficiency Strong understanding of injection molding processes, mold qualification, and downstream assembly operations. Hands-on experience with tooling design, equipment procurement, machine setup, and transfers. Proficient in process validation methodologies (IQ/OQ/PQ) and statistical analysis tools (e.g., Minitab, GainSeeker). CAD experience required; simulation tools a plus. In-depth knowledge of ISO 13485, ISO 9001, FDA, GMP, and medical device standards. Soft Skills Strong project management and organizational abilities. Excellent problem-solving and analytical thinking. Effective communicator across functions and levels; customer-facing experience a plus. High sense of urgency, ownership, and adaptability in fast-paced environments. Work Environment & Physical Requirements Work performed in both office, production, and cleanroom environments. Must be able to stand, walk, and interact with manufacturing equipment daily. Ability to lift up to 25 lbs. Must adhere to cleanroom and safety protocols. Travel: up to 30% domestic for equipment transfers, validations, and site support.

Job Description This position is responsible for reviewing, planning and monitoring incoming special bearing design requirements and providing technical support and assistance both internally and externally. ESSENTIAL FUNCTIONS OF THE JOB: Provide technical support to the Sales force in the areas of bearing design, design improvements, customer support, production support and review of new applications. Works with customers to resolve technical problems and makes technical presentations with the Sales Engineers at target accounts. Review of new applications and provide technical solutions to ensure product performance. Responsible for the conceptual design engineering of new products, special products and contribute to the improvement of existing products and manufacturing methods to meet customer demands. Technical consultant on product design, application and service problems, quality deviations and material and parts substitution. Assists in the technical education of sales trainees and personnel of other departments. Functions as an engineering consultant to manufacturing on problems related to the manufacture of the company's products. Provides product design requirements to product designers assigned to specific projects and assures that all detail process step drawings are in conformance to the requirements and technical specifications. Establishes bearing testing requirements and test plans and reports test results to customers to gain product approval. Responsible for establishing new products into the MRP AS400 system and creating the associated Bill-of-Material. Responsible for approving new product designs and releasing designs to manufacturing Supports lean enterprise activities in support of API Plant objectives. EDUCATION: • Bachelor's degree with major in engineering field required EXPERIENCE: • 3-10 years as Mechanical Engineer or related experience. • Bearing experience is preferred. • Strong mechanical aptitude. SKILLS / CERTIFICATIONS: • Bachelors Degree in an engineering field. Mechanical Engineering preferred. • US citizenship is required. • Strong mechanical aptitude. • Excellent communication skills, capability to interact with customers. • Proficiency with Microsoft Office Programs. • Travel Approximately 15% RBC Bearings is an Equal Opportunity Employer

Brainlab revolutionized digital medical technology with the introduction of software for radiosurgery and surgical navigation. Today, Brainlab is an industry leader in digital surgery, radiotherapy and integrated operating rooms. Serving physicians, medical professionals and patients in 6,000+ hospitals in 121 countries, we're transforming healthcare to improve the lives of patients everywhere. We employ over 2,000 people in 25 locations worldwide. Close-knit teams made of talented, curious and authentic people are working together toward a common goal. Together we're dedicated to making an impact. Sound like you? Join and grow with us. • Provide on-site consulting and guidance to physicians and Operating Room (OR) personnel by evaluating options and problem-solving during surgery in order to maximize Brainlab product efficiency and usage • Manage and maintain install base, including basic 3rd Party integrations • Analyze and resolve product issues for Brainlab systems at assigned Account(s) via Salesforce through detailed analysis and utilization of critical thinking via technical training and documentation • Utilize engineering expertise to contribute to the quality improvement process by recommending product modifications • Provide clinical case coverage & support for Complex Cases and Go Live launches (based on availability) • Manage the process of driving customer utilization, especially via unique workflows and special applications • Act as escalation point for clinical regional issues • Direct and assist Radiology staff in performing necessary scans prior to surgery • Educate/train physicians and hospital personnel, including OR staff, Radiology, Central Sterile Processing, Biomedical and Information Technologies staff, on the use of Image Guided Surgery (IGS) products and services • Develop and conduct training programs for hospital staff enabling them to implement in-house training • Act as primary customer liaison, maintaining contact with customer, assessing satisfaction and usage levels and providing recommendations on this process • Work with the Application Consultant to increase revenue via the sale of spare parts, upgrades, contract renewal, etc. • Work closely with the Application Consultant, Area Account Manager, and Marketing Manager on market transparency, upgrade initiatives, demo/evaluations, and Research & Development (R&D) projects • Attend meetings and trade shows to demonstrate and promote IGS products and services • Keep abreast of developments regarding Brainlab and competitive IGS products and services via ongoing training and individual research and analysis • Collaborate and strategize with Regional Support Manager to provide regular content for team calls/meetings (e.g. provide clinical knowledge transfer, share best practices, interesting cases or case set-ups, etc.) • Maintain Salesforce documentation of all working hours • Attend IGS Continuing Education annually and maintain annual product certification competency - Salary Range 65-85K. Notwithstanding the foregoing, nothing in this job description alters your at-will employment status. Additional duties may be assigned in the discretion of Brainlab. Qualifications B.S. in Biomedical Engineering, Biomechanical Engineering, Bioengineering, Clinical Engineering, or Nursing required 1-3 years minimum experience in a technical support role preferably for a healthcare company or Provider 1-2 years minimum sales experience with healthcare company preferred Knowledge of surgical procedures, anatomy and medical terminology preferred Proficient in the use of PC software applications including Microsoft Office Self-motivated, detail oriented and a proven history of ability to make independent decisions Additional Information In return for the experiences listed above we will provide a business casual environment, competitive compensation package including medical, dental, life, LTD, STD, and matching 401k benefits and much more. Visit us at: **************** Brainlab, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Brainlab participates in E-Verify, more information can be found here. To also review the EEO Law Poster, please click here. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please send a request to ******************.

Brainlab revolutionized digital medical technology with the introduction of software for radiosurgery and surgical navigation. Today, Brainlab is an industry leader in digital surgery, radiotherapy and integrated operating rooms. Serving physicians, medical professionals and patients in 6,000+ hospitals in 121 countries, we're transforming healthcare to improve the lives of patients everywhere. We employ over 2,000 people in 25 locations worldwide. Close-knit teams made of talented, curious and authentic people are working together toward a common goal. Together we're dedicated to making an impact. Sound like you? Join and grow with us. • Provide on-site consulting and guidance to physicians and Operating Room (OR) personnel by evaluating options and problem-solving during surgery in order to maximize Brainlab product efficiency and usage • Manage and maintain install base, including basic 3rd Party integrations • Analyze and resolve product issues for Brainlab systems at assigned Account(s) via Salesforce through detailed analysis and utilization of critical thinking via technical training and documentation • Utilize engineering expertise to contribute to the quality improvement process by recommending product modifications • Provide clinical case coverage & support for Complex Cases and Go Live launches (based on availability) • Manage the process of driving customer utilization, especially via unique workflows and special applications • Act as escalation point for clinical regional issues • Direct and assist Radiology staff in performing necessary scans prior to surgery • Educate/train physicians and hospital personnel, including OR staff, Radiology, Central Sterile Processing, Biomedical and Information Technologies staff, on the use of Image Guided Surgery (IGS) products and services • Develop and conduct training programs for hospital staff enabling them to implement in-house training • Act as primary customer liaison, maintaining contact with customer, assessing satisfaction and usage levels and providing recommendations on this process • Work with the Application Consultant to increase revenue via the sale of spare parts, upgrades, contract renewal, etc. • Work closely with the Application Consultant, Area Account Manager, and Marketing Manager on market transparency, upgrade initiatives, demo/evaluations, and Research & Development (R&D) projects • Attend meetings and trade shows to demonstrate and promote IGS products and services • Keep abreast of developments regarding Brainlab and competitive IGS products and services via ongoing training and individual research and analysis • Collaborate and strategize with Regional Support Manager to provide regular content for team calls/meetings (e.g. provide clinical knowledge transfer, share best practices, interesting cases or case set-ups, etc.) • Maintain Salesforce documentation of all working hours • Attend IGS Continuing Education annually and maintain annual product certification competency - Salary Range 65-85K. Notwithstanding the foregoing, nothing in this job description alters your at-will employment status. Additional duties may be assigned in the discretion of Brainlab. Qualifications B.S. in Biomedical Engineering, Biomechanical Engineering, Bioengineering, Clinical Engineering, or Nursing required 1-3 years minimum experience in a technical support role preferably for a healthcare company or Provider 1-2 years minimum sales experience with healthcare company preferred Knowledge of surgical procedures, anatomy and medical terminology preferred Proficient in the use of PC software applications including Microsoft Office Self-motivated, detail oriented and a proven history of ability to make independent decisions Additional Information In return for the experiences listed above we will provide a business casual environment, competitive compensation package including medical, dental, life, LTD, STD, and matching 401k benefits and much more. Visit us at: **************** Brainlab, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Brainlab participates in E-Verify, more information can be found here. To also review the EEO Law Poster, please click here. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please send a request to [email protected].

JOIN OUR TEAM @ AMPHENOL RF, the world's largest manufacturer of coaxial interconnect products for radio frequency, microwave, and data transmission applications, and a proven leader in enabling next-gen technology! Our global team of experienced engineers develops innovative solutions utilizing the most advanced manufacturing technology available, and we specialize in creating custom solutions that meet customer-specific design requirements. With consistent year over year growth, innovative technology, and a team that breeds success, we are always seeking top-tier, high-performing talent to join us! We are headquartered in Danbury, Connecticut, and a division of Amphenol Corporation (NYSE ticker: APH), an industry leader for more than fifty years. At Amphenol RF, you can expect a competitive salary and comprehensive benefits (medical, dental, vision, matching 401K, FSA, employer-paid life insurance), favorable work/life balance, a generous PTO allowance and paid holidays, an engaging and collaborative work environment, numerous opportunities for career growth, and an entrepreneurial focus that encourages employees to chart their own paths. We are currently seeking an Applications Engineer to serve as our NPI (New Product Introduction) champion, providing technical guidance to both customers and internal stakeholders. Job Description * Prioritize and drive NPI activities for customers within a defined geographic region to drive growth. * Oversee the delivery of projects on-time and on schedule with best-in-class quality with the design and development of application specific connector solutions. * Remain current on market trends and Amphenol product portfolio / Capabilities / Technologies. * Determine optimum manufacturing location (prototype / production) based on customer logistics / factory capabilities in coordination with global operations team. * Address concerns and resolve problems as required. * Drive Engineering Change Orders and New Product Releases. * Utilize global design engineering resources to increase throughput and maximize efficiencies. * Build cost models for new product designs by working with manufacturing and external vendors. * Complete comprehensive product development projects to convert EAR opportunities into revenue. * Organize and publish regional EAR reports with updates to drive weekly meeting agenda. * Maintain organized project files. * Travel with Sales team to provide technical presentations to customers as required. (up to 15%) * Drive rapid resolution of technical quality and production issues related to product consumed within the region. * Assist in value engineering initiatives. * Any other duties as assigned. Requirements * Bachelor's degree in Mechanical or Electrical Engineering with one (1) to three (3) years of related experience. * Proficient in MS Office and Google for Business. * Ability to work with multi-disciplinary teams. * Excellent time-management and organizational skills. * Outstanding verbal and written communication skills * Takes a detail-oriented and efficient approach to their work. Amphenol RF is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.