Engineer jobs in Reading, PA - 314 jobs

MEP Mechanical Design Engineer We are seeking a skilled MEP Mechanical Design Engineer to join our dynamic team. The ideal candidate will be responsible for the design and implementation of mechanical systems in various building projects, ensuring compliance with relevant codes and standards while meeting client requirements. Key Responsibilities Design mechanical systems for HVAC, plumbing, and fire protection in commercial and residential buildings. Conduct code research and ensure all designs comply with local and national regulations. Perform calculations to support design decisions and optimize system performance. Coordinate with electrical and plumbing engineers to ensure integrated MEP design. Engage in field work to verify installations and troubleshoot any issues that arise during construction. Interface directly with clients to understand their needs and provide expert guidance throughout the project lifecycle. Utilize Revit for modeling and documentation of mechanical systems. Qualifications Bachelor's degree in Mechanical Engineering or related field. Professional Engineering License (PE) preferred. Minimum of 3-5 years of experience in MEP design, particularly in HVAC systems. Proficiency in Revit and other relevant design software. Strong knowledge of building codes and standards. Excellent communication and client interface skills. Ability to perform field work and site visits as needed. Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: josh.ortiz@cybercoders.com Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : LB6-1835007 -- in the email subject line for your application to be considered.*** Josh Ortiz - Recruiting Manager For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 01/07/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

Join Us at a Pivotal Moment of Growth [Doosan Robotics Americas & ONExia] is experiencing an exciting transformation. As a leader in not only Cobot but robotic solutions with standard products for palletizing and packaging applications, we're experiencing rapid expansion and scaling our impact across industries. Our cutting-edge systems-from advanced palletizing and case packing to carton erecting and conveyor solutions-are transforming operations for companies across North America, and we need passionate engineers to fuel our next phase of growth. The Opportunity Do you want to work on cutting-edge collaborative robots (Cobots) that redefine automation across industries? At Doosan Robotics, our multidisciplinary team of R&D experts, engineers, and technicians collaborates to create a new era of robotics-robots that work right beside us. We are looking for an experienced, detail-oriented, and self-motivated Cobot Application Engineer to join our team and work directly at customer sites. Responsibilities On-Site Reiview & Analysis - conduct in-depth evaluations of robot(cobot) applications at customer sites to ensure optimal performance. 3D Simulation Support - Utilize advanced simulation tools (e.g., RoboDK or equivalent) to design and validate automation solutions. Application Review & Recommendations - Assess existing robot applications and provide expert suggestions for improvement or proper implementation. Technical support for Dealers & Customers - Assist in developing innovative cobot solutions and support automation projects with system integrators. Collaborate with Sales - Partner closely with the Sales team to deliver outstanding after-sales service. Job Requirements Minimum 3+ years of experience in automation field, particularly in System Integrator or Robot/Cobot manufacturer Strong understanding of Industrial robotics and Automation filed Proficiency in programming language such as Python and C++ Hands-on experience with 3D Simulation tool (RoboDK, Emulator 3D, or similar) Fexibility and willingness to travel as required (50-75%) Bachelor's degree in a related major(Robotics is a plus) Fluency in Spanish is a plus Additional Details: Location: Exton, Pennsylvania Schedule: Monday-Friday Travel: 50-75% (occasional customer sites) Compensation Range: Benefits: 401(k) & 401(k) matching Insurance (Health, Life, Vision, Dental) Flexible schedule Paid time off

A leading designer and manufacturer of custom equipment and turnkey integrated systems for pharmaceutical, biotechnology, and medical product companies. Our Mechanical Engineering team never designs the same machine twice. We thrive on innovation, creativity, and solving complex, real-world problems with no standard solutions. Position Summary As a Mechanical Design Engineer, you will serve as a lead contributor on project teams designing, building, and deploying custom automated equipment. You will collaborate closely with Applications, Controls, and Build teams to deliver unique automation solutions across a wide range of industries and processes. Key Responsibilities Design custom automation equipment and integrated systems for pharmaceutical, biotech, and medical products Develop complete machine layouts through detailed component design Work with vendors to properly size and specify purchased components Generate Bills of Material (BOMs), assembly drawings, and detailed manufacturing drawings Lead and support shop assemblers to ensure designs are built to specification Test and debug equipment on the shop floor and at customer facilities Work overtime as needed to meet customer deadlines Travel locally and overnight to customer sites as required Note: This list of responsibilities is intended as a guideline and may not be all-inclusive. Qualifications Bachelor's degree in mechanical engineering or equivalent experience 5+ years of industrial automation experience 5+ years of machine design experience Proficiency with SolidWorks Experience designing assembly automation equipment Experience designing high-speed, continuous-motion equipment for medical device or pharmaceutical industries Why Join our team? Our team of experts leverages cutting-edge technologies, innovative thinking, and decades of experience to meet the automation needs of customers worldwide. We value creativity, assertiveness, quick thinking, and a passion for technology. If you enjoy solving complex challenges and building one-of-a-kind machines, we invite you to think, solve, and create with us. Benefits 401(k) Health insurance Dental insurance Life insurance Paid time off

The Site Project Engineer supports Project Managers on earthwork, grading, utility installation, and paving projects. This is a field-focused position where you will spend significant time on active construction sites coordinating operations, managing documentation, and ensuring projects meet specifications. You will work directly with excavation crews, subcontractors, and municipal inspectors on sitework operations. This role is ideal for someone who has hands-on experience in heavy civil or sitework construction and wants to grow into project management. Field experience in excavating, grading, or utility construction is the primary driver of success in this position -formal education is preferred but not required. job.Responsibilities: Manage Submittals/Request for Information processes/procedures Assist the Project Manager in purchase order/subcontractor management Assist Project Manager in change order management Know and understand project, township, and water authority specifications for each assigned job. Operates, with precision and speed, specialized, engineering hardware and software that measures and calculates project excavation and construction requirements and determines materials needed in multiple dimensions. Qualifications: Experience in interpreting/takeoff of blueprints, drawings and maps, scope descriptions, and related documents. Knowledge in engineering and project management software, including Bid2Win, Agtek, Autodesk, Microsoft Office suite, and Microsoft Projects The ability to develop and maintain a logical, efficient, and integrated system of schedules, objectives and logistics for each assigned job Experience creating and overseeing cost effective methods for performing work in the most productive manner; offer input regarding costs savings; assisting with seeking out, identifying, and correcting project problems in a timely and cost effective manner Self-motivated team player Detail oriented and possess exemplary communication skills Education/ Experience: 2 year degree in Civil Engineering/Construction Management / related field or equivalent experience preferred Field/ Construction experience is preferred

Join our innovative thermal solutions team- named a Best Place to Work in PA! Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Position summary: The Product Development Engineer supports various phases of projects ranging from concept generation and initial design all of the way to final delivery hardware and volume production. The types of projects vary from exploratory trade studies to highly detailed thermal analysis, to the fabrication of complicated prototype assemblies and testing. At any given time, the Product Development Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Candidates that have a strong technical background with hands-on experience fabricating prototype hardware excel at this position. Responsibilities Include: * All aspects of initial product design including: * Innovative concept generation * Excel or hand calculation analytical analysis * 3-D CAD modeling (Solidworks) * CFD/FEA analysis * 2-D Drawing creation * Fabrication procedure and work instruction development * Working cohesively with a diverse group of engineers and technicians * Managing program schedules and budget * Frequent customer communication/interaction Requirements Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. * B.S. or M.S. degree in Mechanical Engineering or Aerospace Engineering. * Proficiency in using commercial CAD (Solidworks), FEA (Solidworks) and CFD software (Autodesk Simulation, Fluent, Comsol) * Hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing is a plus! * Good verbal and written skills. * Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee, or asylee) due to ITAR restrictions. We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer.

As an Associate Mechanical Design Engineer (AMDE) at TAIT, you will be responsible for project-based work that focuses on specialized machinery and fabrications for the entertainment technology industry. You will work to gain a full understanding of TAIT safety and quality processes while also being aware of standard design principles and practices. You will be responsible for developing designs from concept through to detailed design. Additionally, you will be responsible for collaborating with all departments, rendering support to the production teams, project management, and management. Essential Responsibilities / Accountabilities Learn and follow standard design principles and practices with extensive supervision. Uphold professional and ethical responsibilities, including honesty, respect for life, law, environment, public good, accuracy, rigor, leadership, and communication. Handle project kits or small complexity/risk project elements under supervision of others. Resolve technical issues with supervision to gain expertise through real world application. Utilize CAD platforms to create 2D sketches, hand sketch schematics, and draw full 3D models. Understand the importance of efficient design process and urgency level. Develop designs from concept to detailed design, design reviews, and release of production drawings. Produce overview packets to support client approval and internal communication processes. Utilize CAD tools and internal file structure to document designs properly Collaborate with all departments, participate in design reviews, understand capabilities of machining and fab, material selection for in-house capabilities and outside vendors Conceive standard solutions, client drawing needs, and design decisions must be backed by rational. Understand plans, schedules, documents, and activities for assigned elements or projects. Grasp overall department objectives and high-level project matters, critical issues, new concepts, and policy matters. Receive guidance on application of standard engineering principles and practices. Execute on scope, budget, and schedule for assignments. Understand plans, schedules, documents, and activities for assigned elements or projects. Learn and follow TAIT safety and quality processes. Attend inter-disciplinary project meetings as appropriate. Participate in interview process of new Design and Engineering staff, and on-board new staff. Adhere to all company safety policies and procedures. Attend meetings, seminars, and training sessions as required. Perform assigned duties according to the policies and expectations prescribed by the company. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. Behavioral Competencies Communication: The ability to convey information clearly and effectively through oral and written means. Teamwork and Collaboration: The ability to work effectively with others, and to establish and maintain positive, productive relationships with colleagues. Adaptability and Flexibility: The ability to adjust to change and to modify one's approach in response to evolving circumstances. Problem-Solving: The ability to identify, analyze and solve problems effectively and efficiently. Emotional Intelligence: The ability to understand and manage one's own emotions, as well as the emotions of others. Resilience: The ability to manage stress and cope with adversity, while maintaining a positive outlook and high level of productivity. Strategic Thinking: The ability to think creatively and strategically, and to align one's efforts with broader organizational goals and objectives. Minimum Qualifications: Associate Degree in engineering, Industrial Design, CADD, Technical Theatre, Architectural or Machine Design preferred, or High School Diploma/GED and 2 years of equivalent experience Knowledge of TAIT's markets and competition. Experience with 2D sketches and 3D CAD modeling. Excellent oral and written communication skills Working Conditions and Physical EffortThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods.While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) Work conditions of the role are: Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises Work environment involves some exposure to hazards or physical risks which require following basic safety precautions Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. #LI-AW1

At Connect 5G, we hire the top experts to provide customized services that support Network Rollout and Operational support in a multi -vendor/multi -technology environment. Our mission is to support clients with the expertise they need to build, integrate, optimize, and operate Wireless Cellular Networks focused on their pain points. We are currently looking for a Field Integration Engineer to focus on supporting our customers projects. This position will be responsible for installation, commissioning, integration, troubleshooting and testing at customer Cell Sites. Position will work in conjunction with Remote Vendors, Tower Crews, 5G Management as well as company internal Remote Integration Support Team. Requirements Integration tech with minimum 5 years' experience Ericsson BBU experience - 5216, 6630, 6648, C -Band Install, Integrate, and troubleshoots Ericsson hardware/software Nokia Airscale - commission and integrate L600/L700/L1900/L2100/C -Band Must have experience with Web Element and BTS Manager Experience should include some if not all 5G AHFIG, AHLOA, AHFIB, AAFIA, AAIB, AAFB, FHFB radios Specific OEM related certifications i.e. Ericsson TIF/LTE, and/or Nokia Air scale Strong integration and troubleshooting skills necessary for success Your own working vehicle, laptop, and cell phone Basic Telecom Hand Tools Benefits 5G is as committed to our employees as we are to our clients and believe in creating better careers, fast personal development, and growth opportunities for our Team. If you are skilled, passionate, an out of the box thinker that brings energy, drive, and innovative ideas, we look forward to your application. All applicants must pass a background check and pre -employment drug screen. Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan. Connect 5G is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, sex, religion, national origin, age, disability, genetic information, military status or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. Connect 5G LLC agrees to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions.

Job Description You have 15+ years of passenger rail systems experience and a Bachelor's degree in Engineering. You have significant employment experience with a passenger railroad, and/or a consulting engineering firm with a focus on the railroad industry. You are already an expert. Robson Forensic will train you to be a forensic expert. As a Railway Systems Engineering Forensic Expert, you will: Investigate railway systems incidents. Analyze railway systems procedures, applying your comprehensive knowledge of standards and practices. Write clear, scientifically sound reports. Provide expert testimony. You will delve into the "why" behind incidents, critically assessing decision-making, operational procedures, and the standard of care. This role offers you a chance to: Use your cumulative training, experience, and critical thinking skills. Collaborate with highly respected experts. Continuously learn and grow. Make a tangible difference. Requirements: You have a Bachelor's degree in Engineering from an ABET-accredited program. You have a P.E. license or an EIT/FE and can become a P.E. within 6 months. You have 15+ years of hands-on passenger rail systems experience (additional freight experience is a plus). Depth of experience should include some combination of consulting design work, construction, manufacturing, engineering, operations, and/or maintenance of rail operations, rail infrastructure, and/or rolling stock. Breadth of experience should include a working knowledge of some combination of mainline track, rail yards, sidings, stations (above & below grade), terminals, grade crossings, tunnels, bridges, switches, signal systems, power systems (overhead catenary, third-rail), locomotives (diesel, diesel/electric, or electric power), passenger cars, transit cars, freight cars, maintenance-of-way cars/vehicles, rolling stock maintenance, facilities maintenance, maintenance-of-way, Federal Employees Liability Act (FELA), railroad worker safety, track safety, passenger safety, etc. You can work both independently and as part of a collaborative team. You have excellent technical, analytical, writing and communication skills. You are willing to travel about 20% on average. You have a valid driver's license and the ability to drive. Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new domain. Location: Lancaster, PA or Columbus/Dublin, OH areas ABOUT US: Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. We are an Equal Opportunity Employer. HOW TO APPLY: If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

Job Description Fiat Powertrain Technologies of North America, Inc. (a global Brand under our parent company, Iveco Group) is looking for one Entry Level and one Mid-Level Application Engineer to join our team! The Powertrain Application Engineer performs testing on engines and vehicles to validate new Fiat Powertrain Engine applications and provides technical advice to the brand team to develop and successfully implement product or service solutions that will meet the customer's needs. This is a salary-exempt position. Internal candidates MUST notify their HR Department before applying. Position will temporarily be located in our Westchester, IL office until our new Burr Ridge, Illinois testing lab facility is ready. Our flexible work arrangements policy requires employees to work in the office 12 days per month. Responsibilities Include: Perform vehicle testing per application sign-off documents. Complete testing reports and sign-off documents in a timely manner. Participate with functional groups and engineers in maintaining application and certification requirements in support of product launch milestones. Develop, evaluate, and review integration and installation procedures and standards to ensure that work is of a consistently high quality. Evaluate project proposals to ensure they are technically accurate, consistent with the organization's quality and product standards, and aligned with the organization's overall strategy for its products and services. Liaise with hardware, software, and systems design engineers to ensure that products are modified, configured, and installed according to customer needs. Prepare simple technical documentation to guide system users and to assist with the ongoing operation, maintenance, and development of the system. Coordinate testing activities with the customer and supporting team members as necessary. Ability to travel domestically and internationally (50%). Other duties as assigned. Qualifications: For Entry-Level candidates, we aspire for someone with a degree in engineering or equipment engineering to apply! This is an excellent opportunity to gain experience and knowledge. Recent grads welcome. For Mid-Level , we aspire for someone with a bachelor's degree in engineering and three or more years of experience in engine or equipment engineering. Preferred qualifications: Experience testing diesel engines, including use of industry standard tools: Inca, MatLab, CANalyzer Vehicle integration OBD-related testing Engine and equipment testing and data review Proficient with Microsoft Office Suite Physical Requirements: 50% travel by airplane and car Critical thinking to write thorough and detailed reports Sitting for long periods of time Using a computer for long periods of time Able to lift +/- 5Ibs. Working with a global company offers competitive benefits for this position. Here are just a few benefits we are proud to offer: Immediate medical, dental and vision coverage on date of hire Paid Maternity and Paternity Leave Stellantis vehicle discount program Tuition assistance Employee Resource Groups Flexible Paid Time Off Amazing holiday schedule including shutdown between Christmas and New Year's Generous 401k match Potential opportunities to visit our Global HQ in Turin, Italy EEO Statement US applicants: Fiat Powertrain Technologies of North America, Inc is an equal opportunity employer. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Applicants can learn more about their rights by viewing the Federal "EEO is the Law" poster and its supplement at ******************************************* Fiat Powertrain Technologies of North America, Inc participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. You can view additional information *******************************************

APPLICATION INSTRUCTIONS: * CURRENT PENN STATE EMPLOYEE (faculty, staff, technical service, or student), please login to Workday to complete the internal application process. Please do not apply here, apply internally through Workday. * CURRENT PENN STATE STUDENT (not employed previously at the university) and seeking employment with Penn State, please login to Workday to complete the student application process. Please do not apply here, apply internally through Workday. * If you are NOT a current employee or student, please click "Apply" and complete the application process for external applicants. Approval of remote and hybrid work is not guaranteed regardless of work location. For additional information on remote work at Penn State, see Notice to Out of State Applicants. POSITION SPECIFICS We are searching for motivated and talented Software Engineer join our Comprehensive Software Solutions (CSS) Department of the Applied Research Laboratory (ARL) at Penn State. CSS applies a wide variety of software concepts, techniques, and languages to solve challenging problems for ARL's sponsors as well as internally for ARL needs. ARL is an authorized DoD SkillBridge partner and welcomes all transitioning military members to apply. You will: * Work closely with a team to develop applications to best fit project needs * Maintain version tracking and code documentation * Support field testing - to include remote or in person troubleshooting of software system * Rigorously test application and write unit tests, if required for project Required skills/experience areas include: * Programming in C/C++, C#, Java, or Python * Use of version tracking tools - Jira, Git * Creativity in problem solving * Strong written, oral, and interpersonal communication and presentation skills Preferred skills/experience areas include: * A degree in Software Engineering or Computer Science * Embedded software development * Graphical user interface development * Current eligibility for access to classified information at the TS/SCI level or higher and may be subject to a government background investigation to upgrade clearance eligibility, if required Your working location will be fully on-site, located in State College, PA. This position may also require periodic travel to remote locations in support of testing. MINIMUM EDUCATION, WORK EXPERIENCE & REQUIRED CERTIFICATIONS If filled as Research and Development Engineer - Intermediate Professional, this position requires: Bachelor's Degree - Engineering or Science 2+ years of relevant experience Required Certifications: None If filled as Research and Development Engineer - Professional, this position requires: Bachelor's Degree - Engineering or Science No prior relevant work experience required Required Certifications: None ARL's purpose is to research and develop innovative solutions to challenging scientific, engineering, and technology problems in support of the Navy, the Department of Defense (DoD), and the Intel Community (IC). FOR FURTHER INFORMATION on ARL, visit our web site at **************** BACKGROUND CHECKS/CLEARANCES Employment with the University will require successful completion of background check(s) in accordance with University policies. All positions at ARL require candidates to possess the ability to obtain a government security clearance; you will be notified during the interview process if this position is subject to a government background investigation. You must be a U.S. citizen to apply. Employment with the ARL will require successful completion of a pre-employment drug screen. SALARY & BENEFITS The salary range for this position, including all possible grades, is $76,700.00 - $129,500.00.THE PROPOSED SALARY RANGE MAY BE IMPACTED BY GEOGRAPHIC DIFFERENTIAL Salary Structure - Information on Penn State's salary structure Penn State provides a competitive benefits package for full-time employees designed to support both personal and professional well-being. In addition to comprehensive medical, dental, and vision coverage, employees enjoy robust retirement plans and substantial paid time off which includes holidays, vacation and sick time. One of the standout benefits is the generous 75% tuition discount, available to employees as well as eligible spouses and children. For more detailed information, please visit our Benefits Page. CAMPUS SECURITY CRIME STATISTICS Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act and the Pennsylvania Act of 1988, Penn State publishes a combined Annual Security and Annual Fire Safety Report (ASR). The ASR includes crime statistics and institutional policies concerning campus security, such as those concerning alcohol and drug use, crime prevention, the reporting of crimes, sexual assault, and other matters. The ASR is available for review here. EEO IS THE LAW Penn State is an equal opportunity employer and is committed to providing employment opportunities to all qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are unable to use our online application process due to an impairment or disability, please contact ************. Federal Contractors Labor Law Poster PA State Labor Law Poster Penn State Policies Copyright Information Hotlines

Facilities Engineer with primarily responsibility for the planning and implementing a strategy aimed at maintain and improving the Lancaster GMP facility infrastructure. Focus on preparing and owning the site multi-year infrastructure plan, capital and expense projects, developing investment business cases, preparing scopes of work, leading project design teams, interfacing with internal customers to develop conceptual plans/designs and user requirements, partnering with site business leaders in identifying key infrastructure initiatives related to: regulatory compliance, energy management, utility systems, building structures, security infrastructure, grounds, building automation systems, etc. Ensure projects meet all critical -to -quality commitments in the areas of quality, schedule, and cost. Interface with the plant maintenance and engineering associates on projects requiring coordination with the manufacturing and in many cases assume the role of the site technical lead for nonmanufacturing related systems. Ensure compliance with the EH&S, OSHA, FDA and any other regulatory agencies, to include building costs Qualifications Education: 2-5 years with BS 0-3 years with MS Experience: 1-3 years experience, or equivalent knowledge and skills, necessary to satisfactorily perform the position responsibilities. Prefered Hours: 8am-430pm Additional Information

Description Mechanical Design Engineers (MDE) at TAIT are responsible for project-based mechanical design work that focuses on specialized machinery, structures, and rigging systems for the entertainment technology industry. MDEs drive innovative technical solutions, while working within TAIT safety and quality processes, as well as leveraging TAIT standard design principles and practices. As part of the wider mechanical design and engineering team, this role will focus on owning specific subsections of projects, which we call elements. This role is a bridge between associate/entry-level roles (which focus on part-level drawings) and senior/experienced roles (which focus on project-level solutions). The MDE team collaborates across departments (project management, fabrication, procurement, field teams) to ensure project success, from “initial concept” through “opening night.” Essential Responsibilities / Accountabilities Collaborate with project teams to develop innovative and effective technical solutions that align with project objectives and exceed client expectations. Plan and execute technical solutions to work within scope, schedule, and budget. Apply TAIT design best practices to design for fit and finish, manufacturing efficiency, onsite assembly + disassembly, and packaging. Identify and understand the underlying physics of complex problems to create successful technical solutions. Identify and prioritize project specific requirements and constraints to drive technical solutions. Apply TAIT Project Delivery best practices and processes including design reviews, project team meetings, use of planning systems/software, Participate in client meetings and produce client-facing drawing packages as needed. Communicate effectively through hand sketches, 2D CAD drawings and cross sections. Efficiently generate robust and clean 3D models to support TAIT's collaborative design process. Produce pitch studies, schematics, storyboards, weight studies, and other supporting tasks to advance the design + engineering process. Identify appropriate timing and scale of prototyping to support design + engineering process. Recognize aspects of project work requiring engineering rigor to collaborate with internal and external engineering review on assigned project work. Identify long lead time items and work with purchasing department to procure project specific components and materials. Use custom TAIT CAD tools as appropriate in design and detailing processes. Maintain project documentation including drawing redlines and operation manuals as required. Release assembly and part drawings to be manufactured internal to TAIT as well as through subcontracting vendors using appropriate dimensioning and tolerancing. Efficiently solve technical issues as they may arise during fabrication, testing, and/or commissioning. Support legacy TAIT equipment as required by project needs and/or support department requests. Maintain awareness of standard of solutions within TAIT's markets, product lines, and platforms. Maintain awareness of TAIT's markets and competition. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. Minimum Qualifications BA/BS/BFA in technical theater, engineering, architecture, industrial design, product design and 4+ years of experience working in a related technical field OR 7+ years of design experience in live entertainment technology or adjacent field Background in 3D CAD modeling Working knowledge of live entertainment technology Experience working in a short-term, project-based environment Success collaborating as part of a cross-functional team Ability to be based in the Lititz, PA TAIT headquarters Preferred Experience Parametric modeling, ideally using Autodesk Inventor Building information modeling (BIM) Design for manufacture (DFM), especially aluminum structures and electro-mechanical machines Rigging, especially theatrical rigging, arena rigging, performer flying, or catenary systems TAIT markets, especially concert touring and theme parks TAIT technology, especially winches, trolleys, and other overhead machinery/structures Working Conditions and Physical EffortThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) Work conditions of the role are: Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises. Work environment involves some exposure to hazards or physical risks which require following basic safety precautions. Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. #LI-AB

Bring Advanced Thermal Technologies From Concept to Production At Advanced Cooling Technologies (ACT), we design and manufacture high-performance thermal management solutions used in spacecraft, military systems, medical devices, laboratory instrumentation, and next-generation HVAC systems. We are proud to be recognized as a Best Places to Work in PA for three consecutive years, and we're continuing to grow. We are seeking a Manufacturing Engineer who enjoys variety, hands-on engineering, creative problem solving, and true ownership of their work. This role bridges Product Development and Production-ensuring that ACT's most advanced technologies can be built efficiently, reliably, and with exceptional quality. What You'll Do In this role, you will directly influence how new thermal products move from concept to repeatable, scalable production. You will: New Product Introduction & Process Development * Lead smooth transitions of products from Product Development to Manufacturing * Translate engineering designs and customer requirements into robust processes, tooling, and documentation * Develop and improve fabrication processes, workflows, and material flow Tooling, Procedure & Documentation * Design and build custom tooling, fixtures, and jigs that enable high-quality manufacturing * Create procedures, travelers, and work instructions to ensure consistency and compliance * Support technicians and production staff with clear direction and engineering expertise Production Support & Continuous Improvement * Analyze cycle times, floor layouts, and production data to improve throughput and efficiency * Troubleshoot manufacturing issues and identify cost, quality, or process improvements * Interact directly with suppliers, generating and approving purchase orders as needed * Evaluate test results, quality data, and customer requirements to ensure compliance This is a hands-on role-expect regular interaction with technicians, parts, processes, and equipment. You won't sit behind a desk all day. Why This Role Is Exciting Many Manufacturing Engineer roles are repetitive. This one isn't. At ACT, you'll: * Work on complex thermal systems used in spacecraft, military vehicles, and cutting-edge commercial applications * Design tooling that directly affects product performance * Influence manufacturing from the earliest stages of product development * See your work move from drawing ? prototype ? full production * Be part of a collaborative team where engineering, production, and leadership work closely together If you enjoy seeing your engineering ideas become real products-and you like a mix of design, analysis, and hands-on problem solving-you'll thrive here. Requirements What You Bring * B.S. in Mechanical Engineering or related engineering discipline * Proficiency in CAD (SolidWorks preferred) * Experience with mechanical inspection and understanding of GD&T * Ability to analyze data, processes, and workflows * Strong communication, documentation, and collaboration skills * Experience with LabVIEW and Excel-based databases is a plus * Must be a U.S. Person as defined by 22 C.F.R. §120.15 (due to ITAR regulations) Benefits & Culture ACT offers a competitive and employee-focused total rewards package, including: * Low-cost medical, dental, and vision coverage * Company-paid life and disability insurance * 401(k) with company match * Profit-sharing bonus plan * Generous PTO, up to 10 paid holidays, and a 9/80 schedule (every other Friday off!) * A culture grounded in innovation, collaborative and supportive teams, and company events and perks that make ACT a genuinely enjoyable place to work! ACT is committed to equal opportunity and participates in the E-Verify program.

You have 15+ years of passenger rail systems experience and a Bachelor's degree in Engineering. You have significant employment experience with a passenger railroad, and/or a consulting engineering firm with a focus on the railroad industry. You are already an expert. Robson Forensic will train you to be a forensic expert. As a Railway Systems Engineering Forensic Expert, you will: Investigate railway systems incidents. Analyze railway systems procedures, applying your comprehensive knowledge of standards and practices. Write clear, scientifically sound reports. Provide expert testimony. You will delve into the "why" behind incidents, critically assessing decision-making, operational procedures, and the standard of care. This role offers you a chance to: Use your cumulative training, experience, and critical thinking skills. Collaborate with highly respected experts. Continuously learn and grow. Make a tangible difference. Requirements: You have a Bachelor's degree in Engineering from an ABET-accredited program. You have a P.E. license or an EIT/FE and can become a P.E. within 6 months. You have 15+ years of hands-on passenger rail systems experience (additional freight experience is a plus). Depth of experience should include some combination of consulting design work, construction, manufacturing, engineering, operations, and/or maintenance of rail operations, rail infrastructure, and/or rolling stock. Breadth of experience should include a working knowledge of some combination of mainline track, rail yards, sidings, stations (above & below grade), terminals, grade crossings, tunnels, bridges, switches, signal systems, power systems (overhead catenary, third-rail), locomotives (diesel, diesel/electric, or electric power), passenger cars, transit cars, freight cars, maintenance-of-way cars/vehicles, rolling stock maintenance, facilities maintenance, maintenance-of-way, Federal Employees Liability Act (FELA), railroad worker safety, track safety, passenger safety, etc. You can work both independently and as part of a collaborative team. You have excellent technical, analytical, writing and communication skills. You are willing to travel about 20% on average. You have a valid driver's license and the ability to drive. Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new domain. Location: Lancaster, PA or Columbus/Dublin, OH areas ABOUT US: Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. We are an Equal Opportunity Employer. HOW TO APPLY: If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

Facilities Engineer with primarily responsibility for the planning and implementing a strategy aimed at maintain and improving the Lancaster GMP facility infrastructure. Focus on preparing and owning the site multi-year infrastructure plan, capital and expense projects, developing investment business cases, preparing scopes of work, leading project design teams, interfacing with internal customers to develop conceptual plans/designs and user requirements, partnering with site business leaders in identifying key infrastructure initiatives related to: regulatory compliance, energy management, utility systems, building structures, security infrastructure, grounds, building automation systems, etc. Ensure projects meet all critical -to -quality commitments in the areas of quality, schedule, and cost. Interface with the plant maintenance and engineering associates on projects requiring coordination with the manufacturing and in many cases assume the role of the site technical lead for nonmanufacturing related systems. Ensure compliance with the EH&S, OSHA, FDA and any other regulatory agencies, to include building costs Qualifications Education: 2-5 years with BS 0-3 years with MS Experience: 1-3 years experience, or equivalent knowledge and skills, necessary to satisfactorily perform the position responsibilities. Prefered Hours: 8am-430pm Additional Information

APPLICATION INSTRUCTIONS: * CURRENT PENN STATE EMPLOYEE (faculty, staff, technical service, or student), please login to Workday to complete the internal application process. Please do not apply here, apply internally through Workday. * CURRENT PENN STATE STUDENT (not employed previously at the university) and seeking employment with Penn State, please login to Workday to complete the student application process. Please do not apply here, apply internally through Workday. * If you are NOT a current employee or student, please click "Apply" and complete the application process for external applicants. Approval of remote and hybrid work is not guaranteed regardless of work location. For additional information on remote work at Penn State, see Notice to Out of State Applicants. POSITION SPECIFICS The Electro-Optics Center (EOC), located in Freeport PA, a Division in the Applied Research Laboratory (ARL) at Penn State University, is seeking a Photonics Research and Development Engineer with expertise in Optical Communications, supporting military and intelligence community customers. You Will: * Perform research and development tasks in optical communications. These include system-based analysis tasks as well as prototype development and testing * Communicate and document results in reports and presentations * Assist with development of proposals for projects * Assist in new concept development; analyzing alternatives independently and applying engineering techniques and procedures to assignments * Lead optical communication related projects of small or moderate size and scope, making substantial contributions * Engage with government customers to identify opportunities and provide potential solutions that lead to funded projects * Provide technical leadership within the division for optical communications * Chair sessions at technical conferences/meetings; participate in external seminars, workshops, professional societies and committees * Independently manage multiple and/or large optical communications projects * Lead the development of proposals and projects that further our knowledge of optical communications * Develop and maintain long-term professional relationships with relevant manufacturers and system integrators, as well as with government sponsors, to ensure projects meet customer requirements and are consistent with ARL's position of trust and strategic mission * Participate in strategic planning initiatives and collaborate with engineers in other technical areas across ARL Required skills and experience includes: * 10+ year's experience in guided (fiber), free-space or under-sea optical communications * Optical system design, especially as it relates to free space and/or fiber optical communication systems * Communication architectures, systems, protocols, devices, media, and integration * Hands-on prototyping and demonstration of optical and RF components, links, and networks * Interfacing with, collection from, and diagnosis of data from hardware * Communicate, document, and present results Preferred skills and experience includes: * A Master's degree in Engineering, Physics, Optics, or a related field is highly desired * Significant experience in the development and understanding of optical communication architectures, systems, protocols, devices, media, and integration - especially as it pertains to military applications * Expert knowledge of current state-of-the-art systems, optical propagation, laser communications systems and subsystems * Space-based payload and systems experience * Experience with end-to-end optical remote sensor development * Current relationships with optical suppliers and familiar with the optics vendor ecosystem * Business development experience with government customers * Project management and leadership * Experience with VPI or OptSim or the like is a bonus * An active Secret security clearance with eligibility for TS/SCI is highly desirable Your working location will be full onsite located in Freeport, PA. Questions related to flexible work should be directed to the hiring manager during the interview process. MINIMUM EDUCATION, WORK EXPERIENCE & REQUIRED CERTIFICATIONS Bachelor's Degree - Engineering or Science 19+ years of relevant experience Required Certifications: None ARL's purpose is to research and develop innovative solutions to challenging scientific, engineering, and technology problems in support of the Navy, the Department of Defense (DoD), and the Intel Community (IC). FOR FURTHER INFORMATION on ARL, visit our web site at **************** BACKGROUND CHECKS/CLEARANCES Employment with the University will require successful completion of background check(s) in accordance with University policies. All positions at ARL require candidates to possess the ability to obtain a government security clearance; you will be notified during the interview process if this position is subject to a government background investigation. You must be a U.S. citizen to apply. Employment with the ARL will require successful completion of a pre-employment drug screen. SALARY & BENEFITS The salary range for this position, including all possible grades, is $141,700.00 - $219,600.00.THE PROPOSED SALARY RANGE MAY BE IMPACTED BY GEOGRAPHIC DIFFERENTIAL Salary Structure - Information on Penn State's salary structure Penn State provides a competitive benefits package for full-time employees designed to support both personal and professional well-being. In addition to comprehensive medical, dental, and vision coverage, employees enjoy robust retirement plans and substantial paid time off which includes holidays, vacation and sick time. One of the standout benefits is the generous 75% tuition discount, available to employees as well as eligible spouses and children. For more detailed information, please visit our Benefits Page. CAMPUS SECURITY CRIME STATISTICS Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act and the Pennsylvania Act of 1988, Penn State publishes a combined Annual Security and Annual Fire Safety Report (ASR). The ASR includes crime statistics and institutional policies concerning campus security, such as those concerning alcohol and drug use, crime prevention, the reporting of crimes, sexual assault, and other matters. The ASR is available for review here. EEO IS THE LAW Penn State is an equal opportunity employer and is committed to providing employment opportunities to all qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are unable to use our online application process due to an impairment or disability, please contact ************. Federal Contractors Labor Law Poster PA State Labor Law Poster Penn State Policies Copyright Information Hotlines

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military