Post job

Engineer jobs in Stevens Point, WI

- 44 jobs
All
Engineer
Manufacturing Engineer
Project Engineer
Field Engineer
Mechanical Design Engineer
Product Development Engineer
Design Manufacturing Engineer
Design Engineer
Graduate Engineer
Mechanical Engineer
  • Field Engineer

    Renovo Solutions 3.1company rating

    Engineer job in Wausau, WI

    A Senior Imaging Service Specialist (SISS) performs and documents planned maintenance and repair of medical diagnostic imaging equipment and associated systems under the supervision from service management to perform the required duties. The SISS must possess and demonstrate a highly advanced knowledge and ability to use the required test equipment and have the required electronic and mechanical knowledge and skills. The SISS must have the ability to interpret and effectively utilize service manuals, schematics and other applicable service information required to perform and document planned maintenance and repair of the diagnostic imaging equipment and systems. The SISS must demonstrate advanced organizational skills as well as effective communications, mentor developing technical staff, interpersonal and customer relations skills as applied to interactions with company personnel and Clinical staff in accordance with established Renovo operational and personnel policies and procedures. Specific Responsibilities: Independently and under service management supervision performs general troubleshooting and repairs to the block circuit and component level. Also, independently and under service management supervision performs installations, calibrations and planned maintenance. Proper use of all standard test equipment: multimeter e. invasive and non-invasive imaging test devices oscilloscope f. service software and keys dosimeter g. hand and power tools AC line analyzer h. phantoms Be able to read, analyze, interpret and follow signal flow on blueprints, schematics and wiring diagrams. Exercise good system troubleshooting skills Proven demonstration in understanding basic aspects of clinical applications and image quality requirements related to medical imaging equipment. Specific Responsibilities (continued): Perform and be available for after-hours service, also available for emergency calls on weekends. May be required to participate in shift scheduling and reasonable travel. Serve as a mentor to developing imaging and technical team members. Service manage original equipment manufacturer-mandated equipment updates/upgrades and satisfactorily complete the required recordings of all work performed in RENOVO's CMMS. *Perform other duties as assigned and capable in scope and under the leadership of a RENOVO supervisor. Required Competencies Accountability - takes ownership of assigned work and responsibilities, follows through and closes the loop Communication - clearly expresses thoughts and ideas both in written and verbal communications, provides timely information Financial Acumen - Considers financial impact of all decisions Integrity - Can admit mistakes, is direct and truthful Customer Service - demonstrates a “customer-first” mentality, focused on meeting the needs of customers and captures feedback to make improvements Priority Setting - Prioritizes assigned schedules and workload Knowledge - Thorough understanding of diagnostic imaging devices and equipment including specialized training Team Building - Mentors newer technicians, facilitates clear communication amongst the team, demonstrates care and respect for co-workers and colleagues Attributes Culture - promotes the RENOVO culture and the culture of the healthcare facility Mechanically inclined - technical skills and abilities to figure out how things work Self-motivated - can work on their own or under limited direction while prioritizing equipment schedules and repair activities. Open-minded - Willing to listen to opinions and criticism, can switch directions quickly Agility - Can perform tasks in a safe, timely manner Attributes continued: Improvement - willing to learn and grow, wants to update job skills for career growth Confidence - Self-reliant decision maker that doesn't second guess decisions Multi-tasker - Is organized and efficient, handles multiple projects or tasks simultaneously Results Driven: Is focused on results and outcomes, is goal oriented Humility - Has a sense of humor, is humble, and can handle stressful situations Skills, Knowledge and Abilities: High school diploma or equivalent education required. A.S. Degree in Biomedical or Electronics Technology or equivalent education preferred. Minimum of five (5) years' experience in the service and maintenance of medical imaging equipment with advanced emphasis on a specific modality equipment type(s). Successful completion/credentialed thru either an accredited Independent Training Organization, Original Equipment Manufacturer or Military equivalent Basic Level I and Level II, Level III and Level IV Imaging Equipment Service Training Course(s). Specialization to an advanced imaging modality equipment type is required. Exceptional organizational skills required. Excellent written and verbal communication skills required. Required Work Hours Forty hours per week during daytime and evening hours. Scheduled work hours may change. Overtime may be required or permitted with prior approval. This position is included in the on-call rotation for the facility. Physical And Mental Requirements Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk. Ability to mentally concentrate while being subject to stress, interruptions and changing work priorities. Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. Must be able to hear speech, distinguish sounds, and speak. Must have near vision, far vision, depth perception, and be able to distinguish colors. Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors. Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds. Must be able to push or pull over 100 pounds frequently (20% of the time). Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties. Travel Reasonable scheduled travel may be requested of this position periodically. Classification FLSA: Non-exempt Reporting And Supervisory Responsibilities The SISS reports to the assigned Manager. This position may have supervisory responsibilities assigned. Administration: Understand and observe company policies and accounting procedures. Represent and promote the company in a professional manner. Relationships: Utilize teamwork in your daily activity and ensure customer satisfaction. Other: Safety - Understand and follow good safety procedures: Radiation c. Mechanical Electrical d. Magnetic Training - Willingly participate in company training programs. Housekeeping - Maintain a clean, orderly appearance of all work areas. Personal appearance - Must observe company dress code at all times and must have good personal hygiene. Maintain all RENOVO owned equipment including tools, test equipment, computers, and others as specified in proper working condition and ensure annual calibration where appropriate. Driver's License - Must maintain an active driver's license in the state of operation. Note: This position description does not list every activity, duty, and responsibility of the position and may be altered by RENOVO at any time. EEO Statement RENOVO Solutions provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, RENOVO Solutions complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. RENOVO Solutions expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of RENOVO's employees to perform their job duties may result in discipline up to and including discharge. Employee signature below constitutes employee's understanding of the requirements, essential functions and duties of the position. Also, acknowledges that a change in duties with or without notice can occur at any time. Employee is an “at-will” employee and this does not act as a contract of employment. Pay rate: $45-$56/hr.
    $45-56 hourly 5d ago
  • Mechanical Design Engineer - Automation & Special Machinery

    Butler Recruitment Group

    Engineer job in Wausau, WI

    Job Description Mechanical Design Engineer - Automation & Special Machinery 3-5 years for a Level II or 0-2 years for a Level I role, designing machinery, tooling, or automation are required for this position A degreed engineer (Associate's or Bachelor's) ready to design in-house automation systems is a requirement Pay is up to $108,000/yr for a highly qualified Level II candidate Must be a United States citizen or Green Card holder No remote, this is on-site Full-time, permanent, W-2 employee Full benefits Located in the Wausau, WI area This full-time, permanent Mechanical Design Engineer - Automation & Special Machinery is at a trusted and well-established commercial product manufacturer that values its employees, fosters a supportive work environment, and prioritizes professional growth and development. The company is growing immensely, with plans to build new manufacturing facilities over the next five years, driving constant investment in new machinery and custom equipment designed internally. The employer views its people as its number one asset, heavily investing in training and development. This is a solid, conservative company that has only had one layoff in 76 years, offering exceptional job security and stability. You will join a highly collaborative team that directly supports manufacturing, allowing you to own projects from cradle-to-grave and see your custom equipment built and implemented. The duties and responsibilities of the successful candidate will include the following: Lead the design and development of complex new machinery, tooling, and automation using 3D and AutoCAD, including evaluating material selection and cost analysis Manage individual projects from concept to completion (cradle-to-grave), including preparing BOMs, coordinating testing, and leading the design team (Level II) Provide technical direction and support to shop floor personnel and maintenance to correct design problems and support process improvement/LEAN initiatives Oversee prototyping, testing, and machine startup activities, interpreting results to implement corrective actions for final run-off Analyze product designs for manufacturing feasibility and make recommendations to optimize delivery time, cost, and part quality The background of the successful candidate must include the following to be considered: 3-5 years of relevant work experience in machine design (designing equipment/machinery for manufacturing) required for Level II Associate's degree in engineering or a related field of study is required; a Bachelor's degree is preferred Strong working knowledge of CAD systems (3D) and an understanding of machine design principles Must have hands-on mechanical interest and background (e.g., ran a mill or lathe, maintenance background) Experience with hydraulics and pneumatics is preferred Possess a solid work history Being a US citizen or green card holder Having a residence within a 45-minute drive
    $108k yearly 19d ago
  • Field Engineer

    Staab Construction Corporation

    Engineer job in Marshfield, WI

    Objective: The Construction Manager Development Program is intended to provide recent graduates of construction related programs (civil or mechanical engineering, building construction management, or similar degrees) knowledge and experience to effectively establish a career in the industry. This program will lay the foundation for estimators, project managers, project supervisors and superintendents, and other similar mid-management roles critical for successfully managing and growing the company. The program will also lay the foundation necessary for eventual attainment of higher level positions within the company as the employee's career advances. Timeline: The program is intended to run for 3-4 years, depending on; participant's experiences prior to joining the program, participants progress within the program, and the participant's desired career path. Program Content: The program is intended to not only expose the participant to all aspects of the business, but to develop specific knowledge and skills in becoming a highly valued contributor within the career path he/she has chosen. Year 1 - Your first year will be spent primarily in the field as a member of a construction crew learning and performing laborer duties. This will allow you to see how the work is performed in the field, the processes used, and the challenges faced in various construction projects. You will periodically rotate into the office to get perspective on the logistical demands and the project management side of the business. During these rotations you will be active in learning the business by helping estimators and project managers with pre or post bid activities and project layouts. During the bidding season (January through March) you may spend 1-3 months in the office with pre bid, bidding, and project layout activities. Year 2 - In your second year you will again spend time in the field, however your focus will start to shift toward seeing how the projects you assisted with in the bidding and planning process now start to shape up in the field. You will continue to work as part of a construction crew through most of the summer, however at times you may rotate into the office on a week by week basis to see both sides of the project throughout the project lifecycle. As you do this you will see your perspective change from learning how, to focusing more on the “why”. You may also be developing an awareness to “best practices.” During the later part of year 2, you should also have developed a vision of your preferred career track…Project Manager or that of a Project Supervisor. Year 3 - Within your third year you will further be focused on your direction of preference (Estimating/Project Management or Field Supervision). Your focus will determine how much time you spend in the field. If your focus is in project management, you will begin preparing to function as a project coordinator, project supervisor, or project manager of a small job. If you are intending to be a field supervisor you may be preparing to lead a small work crew. For both career tracks, you will continue to rotate periodically from field to office and from office to field, depending on project status and your role within the project. Year 4- In your fourth year you may be ready to run your own small job. Running a small job, or a portion of a job, will take up an increasing amount of your time. You will also assist other projects as necessary, either in estimating, project coordination, project management, or helping run jobsites or work crews. Development will focus on leadership, teamwork, shoring up your weak areas, and preparing to run projects of increasing size. Your learning will never be complete, however you will now have the tools to drive your career in the direction which best matches your goals and the expanding needs of the company.
    $51k-76k yearly est. 60d+ ago
  • Mechanical Design and Engineering Technology Adjunct

    Lakeshore Technical College 3.9company rating

    Engineer job in Cleveland, WI

    Employment Type temporary/limited term Apply Now # of Weeks: Varies Hours per week: Varies Work Schedule Days: Schedule: As needed Reports To: Associate Dean of Applied Technology Recruitment Group: Adjunct Faculty Multiple Locations - See for more details: No Closing Date: Salary Expectation: $45.00 per hour - Per Adjunct Faculty Salary Schedule LAKESHORE'S MISSION: Transform individuals to strengthen our communities through innovative and accessible learning. NOTE: Adjunct Faculty positions are for specific classes only and do not imply any availability of full-time employment. SHIFT: Day/Evening/Weekend teaching assignments | Flexible based upon the needs of the college LOCATIONS: Lakeshore College - Cleveland, Wisconsin POSITION SUMMARY: Provide high-quality instruction, emphasizing alignment with the local workforce needs in the field of Mechanical Design and Engineering. Proficiently teach mechanical drafting using industry-standard software like AutoCAD, SolidWorks, and CREO, covering diverse topics such as additive manufacturing, prototyping, reverse engineering, and mechanical design theory drafting skills development will empower students for success, offering hands-on experiences in constructing and revising engineering drawings. Stay at the forefront of industry trends and integrate cutting-edge practices into the curriculum, ensuring students are well-prepared for the workforce. Provide exceptional customer service experience to both internal and external customers throughout every interaction. REASONABLE ACCOMMODATIONS/ADA: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. ESSENTIAL JOB FUNCTIONS (Other duties may be assigned): 100% Instruction * Responsible for placing learning first and providing educational experiences for learners in various delivery formats, schedules, and in various places in accordance with the mission of the college inclusive of: facilitating learning of diverse students, assessing student performance, as well as instruction and outcomes, developing and maintaining current/relevant course materials, and communicating with the community, other schools, the college, the division, and team members. * Developing curriculum, including learning activities and assessments. * Work with curriculum coach to ensure state and Lakeshore design requirements are met. * Teaching/training in business and industry may be assigned. EDUCATION AND EXPERIENCE: * Bachelor's degree in a related discipline is required. Master's degree is preferred. * Two years (4,000) hours of relevant occupational experience, with one year (2,000 hours) of recent relevant occupational experience within the past five years. * Teaching experience preferred. CERTIFICATIONS, LICENSURE, REGISTRATION: * None Knowledge: * Knowledge of Lakeshore's mission, vision, and strategic direction. * Knowledge of Six Sigma and lean manufacturing. Skills: * Proficient in Microsoft Office suite (Word, Excel, PowerPoint, Outlook, etc.). * Excellent written and verbal communication skills. * Strong organizational and time management skills. * Effective interpersonal skills and customer service skills. * Strong critical thinking and problem-solving skills. Working knowledge of AutoCAD, SolidWorks and CREO. * Experience with Additive Manufacturing/3D Printing beneficial. Abilities: * Adapt quickly to new and changing technology. * Perform work accurately and thoroughly, with a high level of accountability and attention to detail. * Work independently, as part of a team, and/or with minimal supervision. * Present self in a professional, ethical, and respectful manner at all times. * Use discretion and maintain a high level of confidentiality. * Prioritize and manage multiple projects or tasks, maintaining deadlines. * Establish and maintain effective working relationships and relate successfully with staff, students, and all stakeholders. PHYSICAL DEMANDS/WORK ENVIRONMENT: * While performing the duties of this job, the employee is regularly required to sit and talk or hear. * The employee frequently is required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. * The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. * The employee must occasionally lift and/or move up to 25 pounds. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. * Work environment may require multi-tasking. * The noise level in the work environment is usually moderate. This job description is designed to cover the basic functions of the job and is not considered a detailed description of every job duty that is required, other duties may be assigned as needed. Duties, responsibilities, and activities may change at any time with or without notice to ensure the successful delivery of organizational objectives. CONDITION(S) OF EMPLOYMENT: * Employment conditional on completion of a Background Information Disclosure (BID) with the results acceptable to the College. * Must meet and maintain Faculty Quality Assurance System (FQAS) requirements within 5 years of employment. #LakeshoreProud Lakeshore College does not discriminate on the basis of race, creed, color, national origin, ancestry, religion, sex, disability, age, sexual orientation, genetic testing, lack of English skills, arrest or conviction record, political affiliation, veteran status, parental status, marital status, pregnancy or other protected categories, in its services, employment, programs, and/or educational programs and activities, including but not limited to admissions, access and participation. The college attempts to be in compliance with all federal laws including but not limited to Title IX & section 504. Inquiries regarding nondiscrimination policies are handled by the executive director of human resources/vice president of student success, 1290 North Avenue, Cleveland WI 53015, phone ************ or ************, ext. 1139. Lakeshore College provides reasonable accommodations to assist persons with disabilities to access or participate in its programs or activities. Persons requiring accommodation to access the college's programs, services, and/or employment should call Lakeshore at ************ or 1.************, or TTY 711. Website: WWW.GOTOLTC.EDU | Telephone: ************** Back Share * * * * * Apply Now
    $45 hourly 60d+ ago
  • Product Development Engineer

    Provision People

    Engineer job in Wausau, WI

    Our award-winning client is seeking a Product Development Engineer to join their team.Our client, a well-established paper manufacturer in Wausau, WI, is seeking a talented Product Development Engineer to join their corporate engineering team. In this role, you will play a pivotal role in bridging the gap between product development and papermaking operations, solving complex problems and driving the development of innovative new products. Responsibilities: Collaborate closely with product development and papermaking teams to identify and address technical challenges. Develop and implement new product concepts and processes. Conduct research and analysis to support product development initiatives. Optimize existing product formulations and manufacturing processes. Evaluate product performance and quality attributes. Stay abreast of industry trends and emerging technologies. Foster a culture of continuous improvement and innovation. Required Qualifications: Bachelor's degree in Engineering (required). Minimum of 3-5 years of experience in the paper, tissue, or cardboard (packaging) industries. Proven hands-on experience in a papermaking environment. Strong understanding of paper coatings and their application processes. Demonstrated ability to solve complex technical problems. Excellent interpersonal and communication skills. Proven track record of driving continuous improvement initiatives. Product development experience (preferred).
    $63k-82k yearly est. 60d+ ago
  • Mechanical Engineer

    Nd Paper 4.5company rating

    Engineer job in Wisconsin Rapids, WI

    Job Title: Mechanical Engineer Compensation The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity. At ND Paper, it is not typical for an individual to be hired at the high end of the range for their role, and compensation decisions are dependent upon the facts and circumstances of each position and candidate. About us: ND Paper is a leading manufacturer of high-quality pulp, paper, and packaging products in the United States, generating over half a billion dollars in annual sales. As a wholly owned subsidiary of Nine Dragons Paper (Holdings) Limited - the largest containerboard producer in the world - ND Paper is part of a global network committed to excellence and innovation. With two integrated pulp and paper mills in Rumford, Maine and Biron, Wisconsin, a packaging plant in Sturtevant, Wisconsin, and two sheeting facilities in Langhorne, Pennsylvania and Fairmont, West Virginia, the ND Paper family produces nearly one million tons of products annually. Our 1,100 dedicated employees are the heart of our operations, and we are committed to fostering positive work environments where individuals can advance and thrive. At ND Paper, we are investing in our future, and that starts with our staff. Job Responsibilities: Demonstrate safety as a core value and establish a safe work environment by actively leading the safe execution of work Provide mechanical engineering functions to support capital & maintenance related projects. Complete preliminary and authorization level engineering studies, including detailed scope development and capital cost estimates. Effectively manage projects to ensure adherence to the authorized project budgets and schedules. Coordinate maintenance and project construction activities to ensure quality while minimizing process-related downtime. Coordinate outside engineering and contractor resources as needed. Assist in troubleshooting and resolving daily mechanical problems with the mill's machinery and equipment. Transfer troubleshooting knowledge to maintenance crews when solving problems. Investigate and assist in solving chronic maintenance problems. Report root cause failure analysis for all mechanical lost time in given area on a regular basis. Supervise mechanical crews as needed for project support, weekend coverage or downdays. Lead safety programs and safety initiatives and ensure that mechanical activities are carried out in a safe manner. Work extended hours when necessary, down days, holidays, and weekend coverage on a rotating basis. Be subject to emergency call-ins during the week. Move about the mill freely (extensive walking, climb ladders and stairs, etc.) and able to tolerate temperature extremes. Communicate effectively (oral and written) and make decisions in emergency situations. Required Experience: Bachelor's degree in mechanical engineering, pulp and paper science or related field, or the equivalent training and/or experience. Preferred Experience: Experience in the mechanical maintenance/reliability field preferred. Prior paper machine experience a plus. Knowledge of the different aspects of papermaking including stock preparation, coating, finishing and paper machines a plus. Previous knowledge of Auto Cad or other computer aided design software packages, SAP preferred or other Maintenance Management systems, Microsoft office, MS Outlook e-mail, etc. Ability to handle multiple time sensitive projects and issues. Ability to interact effectively with all levels of personnel, both hourly and management. Strong organizational, interpersonal, communication, problem solving and decision-making skills, as well as initiative and the ability to delegate decision making and other responsibilities. Must model ND Paper values and achieve results through safe work practices, cross-functional participation, manufacturing excellence, integrity and respect for others. Attributes for Success • Hard work - tackle each task with determination, passion and creativity; the willingness to put in whatever effort is required to successfully complete the job at hand. • Pursuit of Excellence - strive to consistently exceed expectations in our day-to-day work and outperform our competitors in the marketplace, regarding work and company achievements as a collaborative goal with the desire to go above and beyond. • Integrity - treat the company and teammates with upmost respect, operating on strong moral codes to drive company values and culture. • Sense of Urgency - drive forward each day with speed, agility, and flexibility to capture unrealized opportunities and avoid potential risks for the business. • Entrepreneurial Spirit - act like an owner, challenging the status quo, asking the right questions, and actively seeking ways to innovate and improve. • Adaptability - be fluid with ND Paper's continuous evolution while driving change in a fast-paced environment, equipped with the ability to acclimate quickly. • Servant Leadership - set an example by implementing meaningful leadership with heart, empathy, foresight and stewardship. ND Paper Benefits We offer a comprehensive benefits package that includes: • Medical, dental, and vision insurance as well as voluntary benefits such as accident insurance, hospital indemnity, and critical illness for you and your family. • Financial protection benefits, including life insurance, disability insurance, and business travel accident insurance. • Tax advantaged accounts such as Healthcare and Dependent Care Flexible Spending Account (FSA). • Paid holidays, personal days, and vacation days to support work-life balance. • A 401K retirement plan with a company match and annual fixed contribution • Wellness programs with incentives and an on-site clinic available at our Rumford and Biron location. Enjoy competitive salaries, comprehensive health benefits, and paid time off. Discover more about our benefits and how we support our team by visiting 2025 Benefits. Come be a part of our team and grow with us! Please submit your resume, and salary requirements to ****************************** ; No unsolicited resumes - ND Paper does not accept unsolicited resumes from search firms or employment agencies. Any unsolicited resume you submit to us will immediately become the property of ND Paper. If you would like to become a recruiter for ND Paper, please contact us and we will agree in writing to terms and the specific job roles for which you are authorized to recruit.
    $59k-76k yearly est. Auto-Apply 60d+ ago
  • Project Engineer- Transportation

    Entry Level Cad Technician/Design-Drafter In Rhinelander, Wisconsin

    Engineer job in Marshfield, WI

    MSA Professional Services is seeking a Project Engineer Transportation- Field to lead construction-phase services for roadway and infrastructure projects in the Wausau/Eau Claire WI area. This position is ideal for a skilled field professional who thrives on collaboration, problem-solving, and delivering high-quality projects that improve community mobility and safety. As a key member of our Transportation team, you'll oversee roadway construction activities, manage field personnel, and ensure that projects are delivered on time, within budget, and according to design intent. You'll serve as the primary point of contact during construction, representing MSA to clients, contractors, and the public. Who we are: For over 100 years, MSA has helped shape communities through engineering excellence. What began in 1919 with a single practitioner in Baraboo, Wisconsin, has grown into a robust firm of over 500 employee owners across the U.S. Our purpose is simple: to make communities stronger, safer, and more sustainable. We believe in the power of relationships, trust, and doing the right thing - and we take pride in seeing our work come to life. At MSA, we understand that great work happens when you contribute great value, and maintain a balanced life and career. That's why we offer: Employee Ownership = True Investment: MSA is a 100% employee-owned firm. That means when you join our team, you're not just doing a job - you're building your legacy and sharing in the success of the firm. A Culture of Mentorship and Collaboration: Work alongside a talented, cross-disciplinary team that values mentorship, professional development, and team success. A flex time program that empowers you to manage your schedule - because life doesn't always fit inside 9 to 5 A flexible work environment, including hybrid and remote options where possible, to support your productivity and well-being Responsibilities What You'll Do Lead and manage construction-phase services for roadway and infrastructure projects of varying size and complexity. Act as the on-site project lead, overseeing construction progress, schedules, budgets, and deliverables. Serve as the main liaison between clients, contractors, and MSA during active construction, ensuring effective communication and successful project delivery. Provide constructability feedback to design teams, enhancing the quality and efficiency of future projects. Conduct field observations, construction staking, and inspection activities to verify compliance with project plans and specifications. Supervise and mentor field staff, ensuring safety, quality, and technical accuracy in all work performed. Review and manage submittals, pay requests, change orders, and other construction administration tasks. Maintain accurate project documentation, progress reports, and communication logs. Participate in pre-construction and progress meetings with clients and contractors. Contribute to business development by maintaining strong client relationships and supporting proposal development for future work. Support close-out activities including inspections, punch lists, and final documentation. Qualifications What You Bring Bachelor's degree in Civil Engineering. PE license in Wisconsin required. 6+ years of experience in roadway construction management, surveying, or related infrastructure construction services. Proven ability to manage multiple projects and field crews simultaneously. Strong understanding of roadway construction methods, materials, and specifications. Proficiency with MS Office (Word, Excel, Outlook, Teams), survey equipment and various field-testing instrumentation Excellent organizational and communication skills with the ability to interact effectively with clients, contractors, and the public. Demonstrated leadership and mentoring skills. Valid driver's license and ability to travel to project sites as needed. The selected candidate must be authorized to work for any employer in the U.S. without requiring visa sponsorship now or in the future. We are unable to provide or take over sponsorship of an employment visa for this role. Why MSA? Better Together: A collaborative environment that values open ideas, diversity, and authenticity. Our diverse perspectives fuel innovation and success in our employee-owned firm. Multi-disciplinary Opportunities: Follow your interests, explore new experiences, and apply your skills where they have the most impact. We've Got Your Back: Enjoy support when you need it and independence when you don't. We are 400+ strong, working as one cohesive team. Passion & Purpose: We're passionate about our work and proud of it! Share inspirations, "geek out," and think big with us. Pay & Perks: Competitive pay and unique perks that make MSA stand out. Communities of Practice: Our think tanks and idea generators-regular collaboration and learning opportunities. Work-Life Integration: Life doesn't stop when work begins. We support your professional and personal balance. Commitment to Learning: Ongoing training, tuition reimbursement, and cutting-edge technology to keep you connected and creative. Community Engagement: Giving back through volunteering, education, STEM outreach, and event participation, backed by corporate sponsorship and donations. The salary for this position ranges from $79,081 to $125,530 per year commensurate with experience. Higher compensation within this range will be paid to candidates with significant experience and exceptional qualifications. Best-in-Industry Benefits - Eligible employees enjoy: Quality Insurance Options: Medical, dental, and vision coverage for you and your family Paid Time Off: Minimum of 17 days in the first year for full-time employees Paid Holidays: 8 holidays per year Paid Parental Leave: 2 weeks for both parents, with additional time for birth parents under MSA's Short Term Paid Leave Supplemental Insurance: 100% paid life, long-term disability, and short-term disability insurance Employee Stock Ownership Plan (ESOP): 100% employee-owned, with stock provided at no cost 401k Retirement Savings Plan: Generous employer match, immediately 100% vested Short Term Incentive (STIP) bonus MSA is an equal opportunity/affirmative action employer that is committed to diversity and inclusion in the workplace. At MSA, we value a diverse, inclusive workforce and we provide equal employment opportunity for all applicants and employees. All qualified applicants for employment will be considered without regard to an individual's race, color, sex, gender identity, gender expression, religion, age, national origin or ancestry, citizenship, physical or mental disability, medical condition, family care status, marital status, domestic partner status, sexual orientation, genetic information, military or veteran status, or any other basis protected by federal, state or local laws. If you are unable to submit your application because of incompatible assistive technology or a disability, please contact us at ************* Equal Employment Opportunity/Affirmative Action Employer We can recommend jobs specifically for you! Click here to get started.
    $79.1k-125.5k yearly Auto-Apply 33d ago
  • Project Engineer

    Volm Companies 3.9company rating

    Engineer job in Wausau, WI

    Job Title: Project Engineer Reports to: VEST Engineering Manager Pay: Salary is based on experience and geographic location. Antigo, WI- $60,756.80-72,904.00 Idaho Falls, ID- $60,756.50-$72,904.00 Pasco, WA- $69,555.20-$83,470.40 Job Summary The VEST (Volm Engineered Solutions Team) Project Engineer provides plant design, systems integration, and solutions services to our current customers and new markets where growth opportunities have been identified. Supervisory Responsibilities N/A Essential Duties Gain expert level knowledge of product and application in fresh produce packaging equipment. Gather and document customer requirements through sales reps, customers, vendors, and other stakeholders. Travel to project sites to gather site and customer requirement information. Translate customer requirements into RFQs and specifications for third party vendors and Volm partners. Work closely with third party vendors and Volm partners to develop solutions to customers packaging equipment needs. Develop project proposals, pricing, and scope documents for customer quotes and contracts. Create accurate BOMs for sourcing department to procure equipment. Utilize design skills to creatively solve space restriction issues with third-party vendors and Volm partner equipment. Develop plant layouts integrating customer, third party vendor, and Volm partners CAD models. Create accurate installation drawings to allow Volm technicians to install equipment. Travel to project sites to assist installation team with engineering support. Manage equipment projects from concept to execution. Perform technical/product training for sales team members, technicians, and customers. Provide status of ongoing and future projects. Assist in the creation of engineering standards and best practices. Required Skills and Abilities Strong project management skills preferred. Proficient in Microsoft Office Suite of products. Strong spatial awareness. Proficiency in 2D and 3D CAD. Ability to read and interpret architectural, mechanical, and electrical blueprints. Solid understanding of basic electrical and mechanical control systems. Have a valid passport, or the ability to obtain one within 6 months of hire date. Strong communication skills, both verbal and written. Excellent problem-solving abilities and analytical thinking. Effective organizational skills with the ability to prioritize tasks and meet deadlines. Proven ability to work collaboratively in a team environment. Adaptability and flexibility to embrace change and learn new skills. Strong time management skills for efficient task allocation and meeting deadlines. Meticulous attention to detail in completing tasks and maintaining high-quality standards. Customer service orientation with a focus on understanding and addressing customer needs. Education and Experience Knowledge of engineering principles and technical competencies normally acquired by the completion of an Associate's degree or technical certification in engineering or a related technical field, and/or equivalent work experience. Experience in PLC programming preferred. Physical Requirements Ability to stand, walk, and move around for extended periods of time. Capability to lift and carry objects of various weights up to 50 pounds occasionally Proficiency in using hands, fingers, and arms for tasks such as typing and writing. Sufficient visual acuity to read documents and recognize details at close and distant ranges. Ability to hear and understand verbal communication. Flexibility to bend, stoop, and reach low or high objects. Ability to perform physically demanding tasks, such as lifting, pushing, pulling, or carrying heavy objects. Adaptability to work in varying environmental conditions, such as temperature extremes, noise, dust, or fumes, depending on the nature of the job. Willingness to adhere to safety protocols and wear protective gear, including helmets, goggles, gloves, and safety shoes, as required by the job. Company Culture & Values A Commitment to Our Purpose (COMMITTED PEOPLE) - Our mission is to serve and build up our customers, suppliers, communities, and each other, guided by the principles of our Lord Jesus Christ. The commitment to serving and building up is easily seen in those employees that exemplify this value. Without Our Customers We Are Nothing (CUSTOMER FIRST) - We realize that we are blessed to serve our customers and without them, our company does not exist. They rely on us for their success and that is a responsibility we cannot take lightly. Our focus must be on serving them with as seamless communication and access to products as possible. Kind, Humble and Positive (HUMBLE) - These positive traits do not mean being a doormat to others. But when a person is kind, humble and positive it comes through in their genuine caring for those around them. A Desire For “Expert” (EXPERTS) - Our people want to be seen as the experts in their specific roles. From how we convert a bag efficiently and with highest quality, to knowledge of the product portfolio, to desiring to know more about tax or human resource policy - the desire for “expert” drives us in each of our roles. Intentional Growth - Developing of Self and Others (PERSONAL GROWTH)- Times, tools, and customer expectations change. Our team members are interested in developing themselves and those around them. We know that a stronger team is one that makes our customers and our fellow employees happier. Strong Work Ethic (HARD WORKERS) - The commitment to serve those around us is honorable and we respond to this by putting our strongest effort into that purpose. High Expectations of Self and Others (HIGH EXPECTATIONS) - We expect ourselves, and those around us, to put in our best effort. When others struggle, we help them align towards perfection. When we struggle, we are open and humble to hear it and course-correct accordingly. If It Isn't Safe, We Don't Do It (SAFETY) - All people deserve to return home to their loved ones safely and work in an environment where they can best execute their tasks safely. When choosing between safety and profit, safety and efficiency, safety and feelings, safety, and “x” - we choose safety. Travel Requirements This position requires routine overnight travel and routine travel within the workday. Overnight travel is expected once a month or every other month. The duration of each trip will vary based on the travel location. The ability to drive a company owned/leased vehicle or personal vehicle on behalf of the company is required. Inclusion in the company's driver qualification program is required to drive a company owned/leased vehicle or personal vehicle. Becoming a qualified driver includes: Agree to the company driving policies that apply to company owned/leased vehicle or personal vehicle as applicable. Possess and maintain a valid driver license and be a minimum of 21 years of age. Maintain an acceptable driving record, as evidenced by completion of a baseline motor vehicle record check and ongoing monitoring. When driving a personal vehicle on behalf of the company, must provide a copy of the declaration page from personal auto insurance that shows the policy dates and minimum coverage amounts ($300,000 bodily injury per accident/$100,000 property damage per accident or if driving less than 5 hours/200 miles a year $50,000 bodily injury per accident/$10,000 property damage per accident or the state minimum, whichever is more). This requirement is initially and then annually thereafter. Benefits: As a family-owned and operated company, we offer a comprehensive benefits package designed to support you and your family. We offer a strong foundation of benefits, including access to medical, dental, and vision coverage, an HSA employer contribution, and a 401k with profit sharing to secure your future. To support your overall well-being and family life, we offer additional benefits beyond the core package, such as paid vacation, wellness stipends, childcare reimbursement assistance, and much more. We are committed to continuously enhancing our benefits to meet the evolving needs of our team. This job description is intended as a general outline of the primary responsibilities of the position. It is not intended to be an exhaustive or comprehensive list of all duties, responsibilities, or activities that may be required. The employer reserves the right to modify, add, or remove any responsibilities, duties, or activities as deemed necessary with or without notice. Volm Companies is an equal opportunity employer and is committed to providing reasonable accommodation to qualified individuals with disabilities and other protected characteristics. If you require reasonable accommodation to perform the essential functions of the job, please inform us and we will work with you to address your needs.
    $69.6k-83.5k yearly 7d ago
  • Manufacturing Engineer I

    WEG 3.3company rating

    Engineer job in Wausau, WI

    Since 1913, Marathon Electric has been dedicated to providing customers with quality motors and generators for targeted applications. Marathon Electric became part of WEG Group in 2024. Founded in 1961, WEG is a global electric-electronic equipment company, operating mainly in the capital goods sector with solutions in electric machines, automation, and paints for several sectors, including infrastructure, steel, pulp and paper, oil and gas, and mining, among many others. WEG stands out in innovation by constantly developing solutions to meet the major trends in energy efficiency, renewable energy, and electric mobility. With manufacturing units in 12 countries and present in more than 135 countries, WEG has more than 40,000 employees worldwide. MANUFACTURING ENGINEER I Job Summary Manufacturing Engineer assists in determining the operations required for fabrication and assembly of products as well as implementing cost- savings process improvements. Troubleshoots and resolves issues, estimating time requirements for operations, and preparing operation sheets. Recommends and implements improvements and/or modifications in the sequence of operations, equipment utilization, and related matters in order to increase efficiency and cost savings. Primary Responsibilities Works directly with Value Stream Leaders to troubleshoot and resolve runnability constraints and bottlenecks, create set up improvements. Provides feedback and input on corrective action processes for Quality failure resolution. Participates at initiation phase of new product lines to assist in designing cost-effective manufacturing layouts and building tools using ergonomic principles. Develops and designs workplace layouts to reduce job safety risk and inefficient operations. Measures variances to standards, identifies out-of-control variances, investigates causes, and suggests solutions. Collaborates with cross functional teams to ensure BU performance is within budgeted performance parameters: AOP, absorption and other KPIs. Develops methods for measuring work performance against standards. Qualifications Technical Bachelor's degree or equivalent related experience, 3+ years. (Manufacturing Engineering or Industrial Engineering preferred) Green Belt in Lean Six Sigma preferred. Commitment to company values and working with a sense of urgency in areas including Safety, Productivity and Customer Success. Experience in a medium to heavy manufacturing environment with complex machinery, product mix and materials supply chain. Founded in 1961, WEG is a global electric-electronic equipment company, operating mainly in the capital goods sector with solutions in electric machines, automation and paints for several sectors, including infrastructure, steel, pulp and paper, oil and gas, mining, among many others. WEG stands out in innovation by constantly developing solutions to meet the major trends in energy efficiency, renewable energy and electric mobility. With manufacturing units in 17 countries and present in more than 135 countries, the company has more than 45,000 employees worldwide. WEG's net revenue reached R$ 32.5 billion in 2023, 52.9% from outside Brazil. Our business areas are divided as follows. Industrial Electro-Electronic Equipment This area includes electric motors, drives and industrial automation equipment and services, and maintenance services. Electric motors and other related equipment find applications in practically all industrial segments, in equipment such as compressors, pumps and fans, for example. Energy Generation, Transmission and Distribution (GTD) Products and services included in this area are electric generators for hydraulic and thermal power plants (biomass), hydro turbines (small hydroelectric plants or PCH, and hydroelectric generators or CGH)), wind turbines, transformers, substations, control panels and system integration services. Commercial and Appliance Motors In this business area, our focus is the market of single phase motors for durable consumer goods, such as washing machines, air conditioners, water pumps, among others. Paints and Varnishes In this area, which includes liquid paints, powder paints, and electro-insulating varnishes, we have a very clear focus on industrial applications in Brazil and are expanding to Latin America and other regions.
    $66k-86k yearly est. Auto-Apply 60d+ ago
  • Manufacturing Engineer

    Apogee Enterprises 4.3company rating

    Engineer job in Wausau, WI

    Wausau Window and Wall Systems Apogee Enterprises, Inc. (NASDAQ: APOG), founded in 1949 and headquartered in Minneapolis, MN. Apogee is a growing, profitable company with annual revenues approaching $1.3 billion. It provides distinctive metal and glass solutions for enclosing commercial buildings, and glass and acrylic solutions for picture framing and display applications. Brands in the Apogee family are Alumicor, EFCO, Harmon, Linetec, Tru Vue, Tubelite, Viracon and Wausau. ************ Architectural Metals (Metals) is a segment within Apogee that is a provider of aluminum windows, curtainwall (soon to be retired), storefront and entrance systems. We offer an integrated set of capabilities including design, engineering, extrusion, finishing, fabrication, and assembly. Our market-leading brands offer solutions for a wide range of construction project types and sizes across the U.S. and Canada. We are known for our dependable on-time service, robust engineering capabilities, broad product portfolio, and industry-leading quality. Brands supported within the Metals segment include: Alumicor, EFCO, Linetec, and Tubelite. Summary of Position: Develop and implement equipment and processes to manufacture products to design specifications and quality standards. Recommend and implement improvements to production processes, methods and controls as it relates to safety, quality, productivity and cost. Essential Duties and Responsibilities: * Responsible for providing technical direction for assigned processes and equipment * Develop and maintain written procedures and work instructions for assigned areas of responsibility * Communicate with other departments and management regarding manufacturing capabilities, production requirements and other considerations to facilitate the manufacturing processes. * Optimize existing production processes by implementing solutions for equipment effectiveness, flow and efficiency improvements * Design, develop, test, source and cost-justify various tools, machinery and equipment for recommended manufacturing methods * Coordinate vendor and customer activity to support projects * Assist with technical aspects of Continuous Improvement projects and kaizen activity * Apply statistical methods and perform analysis for cost reduction, quality improvement and increased efficiency * Apply Lean/Six Sigma principles (A3 problem solving, kaizen, SMED, 5S) * Promote and lead safety related projects and mindset Qualifications and Requirements: * B.S. in mechanical, chemical, manufacturing or industrial engineering (or equivalent) * 5+ years applicable experience in an engineering role within a manufacturing environment * Familiarity with lean, kaizen, six sigma concepts * Computer proficiency (Excel, Microsoft Office, CAD experience preferred) * Experience with processing equipment and control systems * Strong written and verbal communication skills - technical writing experience preferred * Project management experience and the ability to multi-task * Strong mechanical aptitude, ability to work with tools and maintenance personnel * Excellent interpersonal communication and influential leadership skills Work Environment: * 75% exposure to the production environment. (Heat, operating machinery and noise) * Office duties require sitting behind a desk, performing tasks on a computer * Plant duties require standing and moving about the facility and equipment on a daily basis * Position involves limited travel Other Duties As Assigned Applicants must be currently authorized to work in the United States on a full-time basis. This position is not eligible for [work visa] sponsorship Our Benefits We care about and invest in our employees. We are proud to offer a comprehensive benefits package designed to support their well-being and foster professional development. Here is a glimpse of what you can look forward to if you join our team. * Competitive Benefits Package for employees and their dependents (Medical, Dental, Vision, Life, Disability) * Incentive Plans * 401(k) with employer contribution and match * Employee Stock Purchase Plan with employer match * Paid Time Off (Vacation and Sick Time) * Paid Holidays * Tuition Reimbursement Program * Employee Assistance Program (EAP) * Wellness Program * Training and Career Progression Apogee and our brands are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status or any other characteristic protected by state or federal law.
    $62k-78k yearly est. Auto-Apply 60d+ ago
  • Mechanical Design Engineer

    Thrivingforce Solution

    Engineer job in New London, WI

    Responsibilities: Driving and creating innovative designs that are put the customers' needs first. Design experience, including creating drawings, bills of materials and project management. Quoting (including scope of work) experience Act as technical support for the sales team Other duties as assigned Evaluate product design relative to material selection, cost and reliability Work with manufacturing to ensure product manufacturability and trouble shoot issues Follow through on field tests and develop new ideas and processes Education and Experience Requirements: BSME and project management experience preferred Design experience, including creating drawings, bills of materials and project management. Design for manufacturability experience, Experience with sheet metal and structural fabrication, welding and manufacturing equipment and techniques. Experience using electrical motors, controls, pneumatics, and hydraulics a plus Ability to work in a cross-functional team environment Experience with CAD systems, such as Solid Works and Inventor Computer Literate with experience in the Microsoft Office Suite Excellent problem-solving skills with a hands on attitude Culture: We have a culture of continuous improvement and change where jeans are acceptable most days; we work hard, but play hard, too! About: Client is an Industry Leader in material handling solutions offering the industry's top conveyors. Client is a full-line conveyor system supplier specializing in engineering high-quality, quick-delivery conveyors. We are a vertically integrated company using the latest technology in our Fabrication, Paint and Assembly processes. With 50 years of experience making some of the toughest, most cost-effective, and well-designed conveyor equipment available, we're confident you'll find it a great work environment. RK
    $59k-74k yearly est. Auto-Apply 60d+ ago
  • Project Engineer

    Pearl Engineering

    Engineer job in Wisconsin Rapids, WI

    This position offers an excellent opportunity for mentorship, skill development, and exposure to real-world engineering projects. You will be working in a fast-paced, team environment while gaining valuable experience in consulting and client interaction. Responsibilities: Conduct field examination and condition assessments of structures, including tall structures. Perform Structural Engineering Analysis and Design for both new and existing structures. Assist in preparing Construction Bid Document Packages. Support the development of project scopes, work plans, and cost estimates. Assist in preparing proposal documents. Collaborate with multi-discipline project team members. Engage with clients, contractors, suppliers, and building officials. Requirements A recent graduate from an accredited engineering university program. The successful candidate should have a Bachelor of Science in Civil or Structural Engineering (Master's preferred) or Architectural Engineering with a Structural Engineering Emphasis and a desire to pursue their Professional Engineer (P.E.) or Structural Engineer (S.E.) license in the future. Skills & Knowledge: Strong understanding of Structural Engineering fundamentals and Construction Methods. Eagerness to develop Project Management skills. Excellent interpersonal, facilitation, and communication skills. Strong analytical and problem-solving abilities. Proficiency in AutoCAD, Revit, and Structural Analysis Software is a plus (training available for motivated learners). Strong computer literacy and ability to adapt to new tools.
    $60k-81k yearly est. 60d+ ago
  • Manufacturing Engineer

    Cs&S Staffing Solutions

    Engineer job in Wausau, WI

    through the QCI system following the link below (Copy and Paste): http://jobs.qcitech.com/jobseeker/Manufacturing_Engineer_J02155422.aspx *You can apply through Indeed using mobile devices with this link. Job Description Our client manufactures transportation window systems for recreational vehicles, transit and bus vehicles and related vehicle safety products. Located in central Wisconsin with an abundance of outdoor attractions that include hunting, fishing, skiing and fresh air. The Manufacturing reports to the Plant Manager. RESPONSIBILITIES: Provide problem resolution to ensure product quality, process consistency and timely production results. Lead work flow improvements through Lean Manufacturing methods such as 5S. Plan facility layouts to optimize work flow and develop proper set-up techniques. Assist in the procurement of tooling and fixtures. REQUIREMENTS: Bachelors in Engineering and 1 plus year or an Associate in Engineering and 3 plus years experience in a manufacturing environment. Experience with root cause analysis and problem solving skill. Computer proficiency in Microsoft applications and knowledge of ERP or MRP systems. Any knowledge of window systems is a plus. Willingness to some travel as needed. Additional Information
    $60k-79k yearly est. 9h ago
  • Manufacturing Engineer I

    Marathon Electric

    Engineer job in Wausau, WI

    Since 1913, Marathon Electric has been dedicated to providing customers with quality motors and generators for targeted applications. Marathon Electric became part of WEG Group in 2024. Founded in 1961, WEG is a global electric-electronic equipment company, operating mainly in the capital goods sector with solutions in electric machines, automation, and paints for several sectors, including infrastructure, steel, pulp and paper, oil and gas, and mining, among many others. WEG stands out in innovation by constantly developing solutions to meet the major trends in energy efficiency, renewable energy, and electric mobility. With manufacturing units in 12 countries and present in more than 135 countries, WEG has more than 40,000 employees worldwide. MANUFACTURING ENGINEER I Job Summary Manufacturing Engineer assists in determining the operations required for fabrication and assembly of products as well as implementing cost- savings process improvements. Troubleshoots and resolves issues, estimating time requirements for operations, and preparing operation sheets. Recommends and implements improvements and/or modifications in the sequence of operations, equipment utilization, and related matters in order to increase efficiency and cost savings. Primary Responsibilities Works directly with Value Stream Leaders to troubleshoot and resolve runnability constraints and bottlenecks, create set up improvements. Provides feedback and input on corrective action processes for Quality failure resolution. Participates at initiation phase of new product lines to assist in designing cost-effective manufacturing layouts and building tools using ergonomic principles. Develops and designs workplace layouts to reduce job safety risk and inefficient operations. Measures variances to standards, identifies out-of-control variances, investigates causes, and suggests solutions. Collaborates with cross functional teams to ensure BU performance is within budgeted performance parameters: AOP, absorption and other KPIs. Develops methods for measuring work performance against standards. Qualifications Technical Bachelor's degree or equivalent related experience, 3+ years. (Manufacturing Engineering or Industrial Engineering preferred) Green Belt in Lean Six Sigma preferred. Commitment to company values and working with a sense of urgency in areas including Safety, Productivity and Customer Success. Experience in a medium to heavy manufacturing environment with complex machinery, product mix and materials supply chain. Founded in 1961, WEG is a global electric-electronic equipment company, operating mainly in the capital goods sector with solutions in electric machines, automation and paints for several sectors, including infrastructure, steel, pulp and paper, oil and gas, mining, among many others. WEG stands out in innovation by constantly developing solutions to meet the major trends in energy efficiency, renewable energy and electric mobility. With manufacturing units in 17 countries and present in more than 135 countries, the company has more than 45,000 employees worldwide. WEG's net revenue reached R$ 32.5 billion in 2023, 52.9% from outside Brazil. Our business areas are divided as follows. Industrial Electro-Electronic Equipment This area includes electric motors, drives and industrial automation equipment and services, and maintenance services. Electric motors and other related equipment find applications in practically all industrial segments, in equipment such as compressors, pumps and fans, for example. Energy Generation, Transmission and Distribution (GTD) Products and services included in this area are electric generators for hydraulic and thermal power plants (biomass), hydro turbines (small hydroelectric plants or PCH, and hydroelectric generators or CGH)), wind turbines, transformers, substations, control panels and system integration services. Commercial and Appliance Motors In this business area, our focus is the market of single phase motors for durable consumer goods, such as washing machines, air conditioners, water pumps, among others. Paints and Varnishes In this area, which includes liquid paints, powder paints, and electro-insulating varnishes, we have a very clear focus on industrial applications in Brazil and are expanding to Latin America and other regions.
    $60k-79k yearly est. Auto-Apply 60d+ ago
  • Manufacturing Engineer I

    AROW Global Corp 3.4company rating

    Engineer job in Mosinee, WI

    Job Description Manufacturing Engineer Reporting to the Manufacturing Engineering Manager, the Manufacturing Engineer is responsible for leading a variety of projects aimed at improving efficiency, productivity, and product quality. This role includes developing new product lines, resolving production issues, ensuring process consistency, and maintaining product specifications. The Manufacturing Engineer also utilizes Computerized Numerical Control (CNC) equipment, along with automatic and semi-automatic machinery, to perform precise calculations and accurately cut materials according to design requirements. Essential Duties and Responsibilities: Lead work-flow improvements through lean manufacturing methods. Mentor production personnel in the principals of 5S and lean manufacturing concepts. Plan facility layouts to optimize workflow and develop proper set-up techniques. Collaborate with Lead Hands and those in support functions to improve fabrication and assembly processes. Develop, procure, justify, and validate tooling, fixtures, capital equipment, and automation. Collaborate with Design Engineering to increase the manufacturability of our products. Develop production standards and perform time studies. Recommend methods for improving efficiency and reducing waste of materials and utilities such as restructuring job duties, reorganizing workflow, relocating workstations and equipment, and purchase of equipment. Review 3D CAD design blueprints. Assist in making accurate calculations for programming, including where materials should be cut. Translate instructions into a computer automated manufacturing program (CAM). Assist in writing programs and modifying existing ones to increase efficiency. Analyze and select speeds for programs. As part of the AROW Global team you will need to understand the AROW Business System policy and objectives and how you affect conformance to them. Requirements: Associate or bachelor's degree preferred. Five or more years of experience in manufacturing environment preferred. Proficient in Microsoft Office programs with an emphasis on Excel. Experience with SolidWorks 3D CAD modeling are considered assets. Experience in Enterprise Resource Planning (ERP) or Material Requirements Planning (MRP) systems. Experience with root cause analysis and problem-solving skills. Strong leadership, interpersonal and analytical skills along with the ability to work effectively in a team environment. Excellent verbal communication skills required to communicate with manufacturing personnel, customers', and suppliers. Excellent writing skills to publish reports, work instructions, and company procedures. Willingness to travel domestically and internationally as needed ( Self-motivated with a strong desire to implement change. Physical Demands: The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit; talk or hear; and use hands to handle, or touch objects or controls. The employee is regularly required to stand and walk. On occasion, the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. AROW is an Equal Opportunity and Human Rights Employer and complies with Federal and State/Provincial regulations at all US and Canadian locations. The above statements reflect the general details necessary to describe the principle functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.
    $61k-78k yearly est. 16d ago
  • Field Engineer

    American Engineering Testing Inc. 4.3company rating

    Engineer job in Schofield, WI

    About Us At American Engineering Testing (AET), we believe that people are the heart of innovation. We create an environment that values teamwork, curiosity, and continuous improvement while delivering innovative engineering and consulting solutions. As a 100% employee-owned firm, we deliver comprehensive testing, analysis, and design to reduce uncertainty in construction projects and offer rewarding work, exceptional training, and career development opportunities. Job Summary Field Engineer plays a critical role by assisting engineers and technicians with project duties in the field. This position is responsible for supporting engineering projects, performing laboratory testing, and conducting field observation of construction materials, ensuring accurate data collection and reliable project outcomes. The ideal candidate will demonstrate adaptability, technical expertise, and a collaborative mindset, and contribute to the division's mission of delivering high-quality construction services. Essential Duties and Responsibilities Field and Laboratory Work Perform field and laboratory quality control testing of soils in accordance with AET QA/QC procedures and industry standards (ASTM, ASIC, ACI). Conduct geotechnical field testing, soil boring layout/documentation, utility clearance meetings, and surveying. Complete field sampling of materials, including coring and hand auger borings. Operate and maintain specialized equipment such as Ground Penetrating Radar (GPR), Falling Weight Deflectometer (FWD), and Geoprobe sampling units. Log and classify soil samples in the field or laboratory as needed. Assist in training less experienced personnel in routine field work and documentation. Reporting and Communication Prepare detailed reports of field and laboratory work using standard AET forms. Document site observations and maintain accurate job files. Communicate effectively with project managers, clients, contractors, and other project personnel to ensure project requirements are met. Complete tasks in accordance with project quality requirements and deadlines. Compliance and Safety Conduct all activities in compliance with federal, state, and local regulations, as well as AET's QA and Health & Safety Policies. Maintain valid driver's license and acceptable driving record; comply with DOT regulations if required. Maintain appropriate physicals if required for position. Properly use and maintain company instruments and equipment. Additional Responsibilities Assist with laboratory maintenance and improvement efforts. Maintain high chargeable productivity and coordinate with other staff to increase efficiency and communication. Establish and maintain positive business relationships with clients; assist with marketing functions as needed. Frequent travel within regional area; occasional out-of-town travel (up to 75%), nights, or weekends. Perform other duties as necessary to meet departmental and company goals. Required Qualifications and Education Bachelor's degree in Civil, Geological, or related Engineering field. 0-3 years of experience in an engineering or science related field. Engineer in Training (EIT) and ability to achieve professional registration (PE). Internship or previous work experience preferred, but not mandatory. Preferred Qualifications Solid understanding of engineering or scientific principles and ability to apply them in practice. Proficiency with Microsoft Office and basic computer applications. Ability to perform field work at construction or remediation sites, including sampling, operating instruments, following procedures, and documenting activities. Strong communication skills to clearly convey technical information to diverse audiences. Effective teamwork and problem-solving skills; ability to work independently in the field. Physically capable of performing labor-intensive tasks, including lifting 50-100 lbs and conducting hand auger borings. Work Environment This job primarily operates primary in a field environment in outdoor conditions, on construction sites with uneven ground and adverse weather conditions. This role secondary operates in an office environment and uses standard office equipment such as computers, phones, and photocopiers. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands or finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance, and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50-100 pounds. The employee will occasionally push or pull equipment weighing up to 200 pounds. The employee is required to frequently work outside. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Pay Transparency Base compensation is expected to be in the range of $27.00 - $29.00 per hour based on skill set and experience. AET offers a comprehensive benefits package, including health benefits, insurance, Employee Stock Ownership Plan (ESOP), long-term savings, paid time off, and professional development opportunities. The selected candidate must be authorized to work for any employer in the U.S. without requiring visa sponsorship now or in the future. Third Party Disclosure Notice to Third Party Agencies: AET does not accept unsolicited resumes from third party recruiting firms. Absent a signed Service Agreement by AET's Chief People Officer (CPO), AET reserves the right to pursue and hire these candidates without financial obligation to recruiters or agencies.
    $27-29 hourly Auto-Apply 17d ago
  • Field Engineer

    Geotechnical 3.6company rating

    Engineer job in Schofield, WI

    About Us At American Engineering Testing (AET), we believe that people are the heart of innovation. We create an environment that values teamwork, curiosity, and continuous improvement while delivering innovative engineering and consulting solutions. As a 100% employee-owned firm, we deliver comprehensive testing, analysis, and design to reduce uncertainty in construction projects and offer rewarding work, exceptional training, and career development opportunities. Job Summary Field Engineer plays a critical role by assisting engineers and technicians with project duties in the field. This position is responsible for supporting engineering projects, performing laboratory testing, and conducting field observation of construction materials, ensuring accurate data collection and reliable project outcomes. The ideal candidate will demonstrate adaptability, technical expertise, and a collaborative mindset, and contribute to the division's mission of delivering high-quality construction services. Essential Duties and Responsibilities Field and Laboratory Work Perform field and laboratory quality control testing of soils in accordance with AET QA/QC procedures and industry standards (ASTM, ASIC, ACI). Conduct geotechnical field testing, soil boring layout/documentation, utility clearance meetings, and surveying. Complete field sampling of materials, including coring and hand auger borings. Operate and maintain specialized equipment such as Ground Penetrating Radar (GPR), Falling Weight Deflectometer (FWD), and Geoprobe sampling units. Log and classify soil samples in the field or laboratory as needed. Assist in training less experienced personnel in routine field work and documentation. Reporting and Communication Prepare detailed reports of field and laboratory work using standard AET forms. Document site observations and maintain accurate job files. Communicate effectively with project managers, clients, contractors, and other project personnel to ensure project requirements are met. Complete tasks in accordance with project quality requirements and deadlines. Compliance and Safety Conduct all activities in compliance with federal, state, and local regulations, as well as AET's QA and Health & Safety Policies. Maintain valid driver's license and acceptable driving record; comply with DOT regulations if required. Maintain appropriate physicals if required for position. Properly use and maintain company instruments and equipment. Additional Responsibilities Assist with laboratory maintenance and improvement efforts. Maintain high chargeable productivity and coordinate with other staff to increase efficiency and communication. Establish and maintain positive business relationships with clients; assist with marketing functions as needed. Frequent travel within regional area; occasional out-of-town travel (up to 75%), nights, or weekends. Perform other duties as necessary to meet departmental and company goals. Required Qualifications and Education Bachelor's degree in Civil, Geological, or related Engineering field. 0-3 years of experience in an engineering or science related field. Engineer in Training (EIT) and ability to achieve professional registration (PE). Internship or previous work experience preferred, but not mandatory. Preferred Qualifications Solid understanding of engineering or scientific principles and ability to apply them in practice. Proficiency with Microsoft Office and basic computer applications. Ability to perform field work at construction or remediation sites, including sampling, operating instruments, following procedures, and documenting activities. Strong communication skills to clearly convey technical information to diverse audiences. Effective teamwork and problem-solving skills; ability to work independently in the field. Physically capable of performing labor-intensive tasks, including lifting 50-100 lbs and conducting hand auger borings. Work Environment This job primarily operates primary in a field environment in outdoor conditions, on construction sites with uneven ground and adverse weather conditions. This role secondary operates in an office environment and uses standard office equipment such as computers, phones, and photocopiers. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands or finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance, and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50-100 pounds. The employee will occasionally push or pull equipment weighing up to 200 pounds. The employee is required to frequently work outside. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Pay Transparency Base compensation is expected to be in the range of $27.00 - $29.00 per hour based on skill set and experience. AET offers a comprehensive benefits package, including health benefits, insurance, Employee Stock Ownership Plan (ESOP), long-term savings, paid time off, and professional development opportunities. The selected candidate must be authorized to work for any employer in the U.S. without requiring visa sponsorship now or in the future. Third Party Disclosure Notice to Third Party Agencies: AET does not accept unsolicited resumes from third party recruiting firms. Absent a signed Service Agreement by AET's Chief People Officer (CPO), AET reserves the right to pursue and hire these candidates without financial obligation to recruiters or agencies.
    $27-29 hourly Auto-Apply 17d ago
  • Manufacturing Production Design Engineer

    Ctech Manufacturing

    Engineer job in Schofield, WI

    Job DescriptionDescription: Manufacturing Production Design Engineer At CTech Manufacturing, we pride ourselves on designing and building innovative, high-quality storage solutions. Our success comes from the strength of our people, our commitment to craftsmanship, and our drive to continuously improve. We are looking for a Production Design Engineer to join our growing team and help bridge the gap between product design and efficient, scalable manufacturing. What You'll Do Design and develop manufacturing processes, tooling, and fixtures to support production. Create and maintain accurate 2D/3D models, drawings, and specifications. Partner with product development teams to ensure designs are efficient for manufacturing and assembly. Lead process improvement initiatives to increase efficiency, reduce waste, and improve product quality. Troubleshoot production challenges and implement solutions. Support new product introduction (NPI) by transitioning designs into production-ready processes. Ensure compliance with safety, quality, and regulatory standards. Document procedures and support training of production teams. Requirements: What We're Looking For Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering (or equivalent experience). 2+ years of experience in a production or manufacturing engineering role. Proficiency in CAD software (Inventor preferred). Knowledge of manufacturing methods such as machining, fabrication, and assembly. Familiarity with Lean Manufacturing and continuous improvement methods is a plus. Strong analytical, problem-solving, and communication skills. Ability to collaborate effectively in a team-oriented environment. What We Offer Full-time schedule: Monday - Friday, 8:00 AM - 5:00 PM Competitive pay and benefits package Opportunities for career development and advancement A supportive, innovative, and growth-focused company culture Join Us at CTech If you're ready to take your engineering career to the next level and make an impact on how we design and build world-class manufacturing solutions, we'd love to hear from you. Apply today and be part of a team that builds with precision, innovation, and pride!
    $46k-66k yearly est. 17d ago
  • Manufacturing Engineer

    Cs&S Staffing Solutions

    Engineer job in Wausau, WI

    Please, review and apply for this position through the QCI system following the link below (Copy and Paste): http://jobs.qcitech.com/jobseeker/Manufacturing_Engineer_J02155422.aspx *You can apply through Indeed using mobile devices with this link. Additional Information
    $60k-79k yearly est. 9h ago
  • Manufacturing Engineer I

    Arow Global Corp 3.4company rating

    Engineer job in Mosinee, WI

    Manufacturing Engineer Reporting to the Manufacturing Engineering Manager, the Manufacturing Engineer is responsible for leading a variety of projects aimed at improving efficiency, productivity, and product quality. This role includes developing new product lines, resolving production issues, ensuring process consistency, and maintaining product specifications. The Manufacturing Engineer also utilizes Computerized Numerical Control (CNC) equipment, along with automatic and semi-automatic machinery, to perform precise calculations and accurately cut materials according to design requirements. Essential Duties and Responsibilities: Lead work-flow improvements through lean manufacturing methods. Mentor production personnel in the principals of 5S and lean manufacturing concepts. Plan facility layouts to optimize workflow and develop proper set-up techniques. Collaborate with Lead Hands and those in support functions to improve fabrication and assembly processes. Develop, procure, justify, and validate tooling, fixtures, capital equipment, and automation. Collaborate with Design Engineering to increase the manufacturability of our products. Develop production standards and perform time studies. Recommend methods for improving efficiency and reducing waste of materials and utilities such as restructuring job duties, reorganizing workflow, relocating workstations and equipment, and purchase of equipment. Review 3D CAD design blueprints. Assist in making accurate calculations for programming, including where materials should be cut. Translate instructions into a computer automated manufacturing program (CAM). Assist in writing programs and modifying existing ones to increase efficiency. Analyze and select speeds for programs. As part of the AROW Global team you will need to understand the AROW Business System policy and objectives and how you affect conformance to them. Requirements: Associate or bachelor's degree preferred. Five or more years of experience in manufacturing environment preferred. Proficient in Microsoft Office programs with an emphasis on Excel. Experience with SolidWorks 3D CAD modeling are considered assets. Experience in Enterprise Resource Planning (ERP) or Material Requirements Planning (MRP) systems. Experience with root cause analysis and problem-solving skills. Strong leadership, interpersonal and analytical skills along with the ability to work effectively in a team environment. Excellent verbal communication skills required to communicate with manufacturing personnel, customers', and suppliers. Excellent writing skills to publish reports, work instructions, and company procedures. Willingness to travel domestically and internationally as needed ( Self-motivated with a strong desire to implement change. Physical Demands: The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit; talk or hear; and use hands to handle, or touch objects or controls. The employee is regularly required to stand and walk. On occasion, the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. AROW is an Equal Opportunity and Human Rights Employer and complies with Federal and State/Provincial regulations at all US and Canadian locations. The above statements reflect the general details necessary to describe the principle functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.
    $61k-78k yearly est. Auto-Apply 60d+ ago

Learn more about engineer jobs

How much does an engineer earn in Stevens Point, WI?

The average engineer in Stevens Point, WI earns between $62,000 and $116,000 annually. This compares to the national average engineer range of $65,000 to $130,000.

Average engineer salary in Stevens Point, WI

$85,000
Job type you want
Full Time
Part Time
Internship
Temporary