Engineer Trainee (35 Hour)
Engineering internship job in Hartford, CT
Introduction The State of Connecticut, Department of Energy and Environmental Protection (DEEP) is seeking to fill an Engineer Trainee vacancy in the Investigations Unit of the Bureau of Air Management's Enforcement Division. This position will be located in Hartford, CT.
WHAT'S IN IT FOR YOU:
Visit our new State Employee Benefits Overview page!
Professional growth and development opportunities
A healthy work/life balance!
Thirteen (13) paid holidays each calendar year. Employees who are requested to work as part of a regular schedule on a “premium” holiday (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day and Christmas Day) shall be paid at the rate of time and one-half for hours worked in addition to regular pay for the day.
Position Highlights
This position receives training under the direction of a supervisor or senior staff for a period of one year. Promotion to Environmental Protection Air Pollution Control Engineer 1 will occur after successful completion of the training program.
This position will require routine in-state travel in support of the unit's work, e.g., conducting on-site inspections.
This position will require infrequent out-of-state travel for training and to attend regional and national work groups and conferences.
Within the Enforcement Division, the Investigations Unit is responsible for:
Implementing the Department's Geospatial Measurement of Air Pollution (GMAP) program. The GMAP program involves the use of a motor vehicle equipped with air pollution analyzers, meteorological instrumentation, and GPS to conduct mobile enforcement screening and community-based monitoring of criteria air pollutants, air toxics, and greenhouse gases. The GMAP program plays an important role in enhancing the Department's responsiveness to residents' air quality concerns and in advancing the Department's commitment to community engagement and environmental justice/equity.
Conducting inspections in response to public complaints.
Conducting inspections of air pollution sources.
About Us CT DEEP is charged with conserving, protecting, and improving Connecticut's natural resources and environment as well as making clean, reliable, and affordable energy available for the people and businesses of the state. The agency is also committed to playing a positive role in supporting economic development and job creation in Connecticut as well as fostering a sustainable and prosperous economic future for the state.
Within the Bureau of Air Management (BAM), our mission is to protect human health, safety, and the environment and to enhance the quality of life of Connecticut citizens by implementing regulatory programs and supporting policies to advance clean air and climate change objectives, advance radiation safety, and promote public health.
The Bureau consists of four divisions: Planning & Standards, Engineering, Radiation, and Enforcement.
Selection Plan
FOR ASSISTANCE IN APPLYING:
Check out our Applicant Tips on How to Apply! Need more resources? Visit our Applicant Toolkit for additional support throughout the recruitment process.
BEFORE YOU APPLY:
Meet Minimum Qualifications: Ensure you meet the Minimum Qualifications listed on the job opening by the job closing date. You must specify your qualifications on your application. The minimum experience and training requirements listed must be met by the close date on the job opening, unless otherwise specified.
Educational Credits: List your earned credits and degrees from accredited institutions accurately on your application. To receive educational credits towards qualification, the institution must be accredited. If the institution of higher learning is located outside of the U.S., you are responsible for providing documentation from a recognized USA accrediting service which specializes in determining foreign education equivalencies to the contact listed below by the closing date listed on the job posting.
Resume Policy: Per Public Act 21-69, resumes are not accepted during the initial application process. As the recruitment process progresses, candidates may be required to submit additional documentation to support their qualification(s) for this position. This documentation may include: a cover letter, resume, transcripts, diplomas, performance reviews, attendance records, supervisory references, licensure, etc., at the request and discretion of the hiring agency.
Preferred Shift/Location: Select all location(s) and shift(s) you are willing to work on your application. Failure to do so may result in not being considered for vacancies in that specific location or shift.
Timely Submission: All application materials must be received by the job posting deadline. You will be unable to make revisions once you officially submit your application to the State. Late submissions are rarely accepted, with exceptions only for documented events that incapacitate individuals during the entire duration of the job posting. Request exceptions by emailing ***************.
Salary Calculations: For current state employees, salary calculations are not necessarily comparable from one of the three branches of state government (i.e., Executive, Legislative, Judicial) to the other.
Note: The only way to apply to this posting is via the ‘Apply' or ‘Apply Online' buttons on the official State of Connecticut Online Employment Center job posting.
AFTER YOU APPLY:
Referral Questions: This posting may require completion of additional Referral Questions (RQs), which must be completed by the questionnaire's expiration date. If requested, RQs can be accessed via an email sent to you after the job close date or by visiting your JobAps Personal Status Board (Certification Questionnaires section).
Prepare For An Interview: Interviews are limited to those whose experience and training are most aligned with the role. To prepare, review this helpful Interview Preparation Guide to make the best impression!
Stay connected! Log in daily to your JobAps Personal Status Board to track your status and check email (including spam/junk folders) for updates and tasks.
The immediate vacancy is listed above, however, applications to this recruitment may be used for future vacancies in this job class.
Note: This position will be filled in accordance with contractual language, reemployment, SEBAC, transfer, promotion and merit employment rules. Candidates who are offered and accept a position with the State of Connecticut are bound by the State Code of Ethics for Public Officials and State employees, available at ******************
QUESTIONS? WE'RE HERE TO HELP:
Due to high volume, we are unable to confirm receipt or provide status updates directly. For recruitment updates, please check your Personal Status Board and review our Frequently Asked Questions. If you have additional questions about the recruitment process, reach out to Nick Naples at **********************.
Join the State of Connecticut and take your next career step with confidence!
PURPOSE OF JOB CLASS (NATURE OF WORK) In a state agency this class is accountable for receiving training in introductory professional engineering work for the development of technical and professional engineering skills and knowledge in order to qualify for advancement to the technical engineering work of the agency. EXAMPLES OF DUTIES
Operate and maintain the Investigation Unit's GMAP vehicle;
Operate, maintain, and calibrate the air pollution analyzers within the GMAP vehicle;
Operate and maintain the meteorological instrumentation and GPS within the GMAP vehicle;
Maintain an inventory of spare parts, calibration gases, and other expendables necessary for the operation of the GMAP instrumentation;
Gather, synthesize, and prepare GMAP-acquired air quality data for supervisory review;
Validate GMAP-acquired data;
Assist in establishing community-based air quality monitoring programs;
Assist in conducting public outreach and participating in air quality workshops;
Participate in programs that promote environmental justice and equity;
Assist in developing emerging uses for the GMAP instrumentation;
Attend classroom training, workshops, seminars, or meetings to maintain and grow knowledge of the latest technology, information, and research within the field of air monitoring and GMAP;
Conduct acceptance testing of new equipment and prepare reports on findings;
Conduct inspections of certain sources of air pollution;
Respond to public complaints of potential air pollution incidents;
Prepare inspection reports;
Draft enforcement actions;
Prepare memoranda and correspondence.
KNOWLEDGE, SKILL AND ABILITY
Knowledge of basic engineering theories, principles and methods;
Skill in the use of drafting and calculating instruments;
Considerable ability to perform mathematical computations, making neat and accurate drawings and preparing minor design and structural details;
Ability to utilize computer software.
MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE Candidates must be able to meet the experience and training requirements of the designated job class at the completion of the development program. PREFERRED QUALIFICATIONS
Professional experience or academic coursework in the principles and practices of air pollution control;
Professional experience or academic coursework in the interpretation, application, and enforcement of air pollution control statutes, regulations, and permits;
Professional experience or completion of a bachelor's degree or higher in an engineering discipline, or atmospheric science discipline;
Experience gathering, organizing, synthesizing, analyzing, and presenting data sets utilizing mapping applications;
Experience communicating technical, regulatory, and policy information pertaining to the air quality field to audiences verbally and in writing;
Experience installing, operating, calibrating, repairing, or maintaining air pollution monitoring equipment;
Experience reading and interpreting schematics, diagrams, and service manuals.
Conclusion
AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER
The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women, minorities, and persons with disabilities.
ACKNOWLEDGEMENT As defined by Sec. 5-196 of the Connecticut General Statutes, a job class is a position or group of positions that share general characteristics and are categorized under a single title for administrative purposes. As such, a job class is not meant to be all-inclusive of every task and/or responsibility.
Dudley Materials Science Engineering Summer 2026 Intern
Engineering internship job in Dudley, MA
Requisition ID: 900032 Store #: E01595 Lens Sub Mat-Tech-TP DUDL Position:Seasonal/TemporaryTotal Rewards: Benefits/Incentive Information Gentex Optics is part of EssilorLuxottica, a global leader in the design, manufacture and distribution of world-class vision care products, including iconic eyewear, advanced lens technology and cutting-edge digital solutions. Join our global community of over 200,000 dedicated employees around the world in driving the transformation of the eyewear and eyecare industry. Discover more by following us on LinkedIn!
The Dudley, MA facility is home to Operations, Global Lens Engineering, and Research and Development teams that work together to develop, pilot and manufacture, semi-finished, polycarbonate lenses for premium markets. We also supply coatings, inks, inserts and other innovative products to customers throughout the world.
Our team members bring our mission to life each and every day by helping people see a brighter world.GENERAL FUNCTION
As a participant in the EssilorLuxottica Internship Program, you will work towards a life-enhancing mission that unites us all. We believe vision is a basic human right, and by bringing together world-leading expertise in lens and eyewear technology, we are promising a brighter future for the hundreds of millions of people we serve globally. Therefore, whatever role you are in, you can make a meaningful difference to people's lives.
The EssilorLuxottica Full-Time internship spans 10 weeks in the summer (with opportunities to extend Part-Time during the academic year) and allows you to become fully immersed into EssilorLuxottica and its brands. You will perform meaningful work that delivers real impact, take part in learning and career development sessions, and experience one-on-one mentorship and interactive networking events.
MAJOR DUTIES AND RESPONSIBILITIES
* Support material and process engineers with active projects;
* Assist in researching new materials, technologies, and potential alternatives for ophthalmic lens;
* Conduct physical, chemical, and optical characterization of these materials and assemblies;
* Help develop manufacturing processes (e.g., injection molding, extrusion compounding, film lamination, etc), and assist in troubleshooting production issues;
* Maintain and organize material data sheets, test reports, and process documentation;
* Attend project meetings and provide updates to cross functional partners;
* Maintain a safe, organized, and clean working environment by complying with procedures, rules, and regulations;
BASIC QUALIFICATIONS
* Seeking a degree in Material Science and/or Engineering, Polymer Science and/or Engineering, Mechanical Engineering, Chemical Engineering, or a related field, with a minimum GPA of 3.0/4.0;
* Legal authorization to work in the U.S. required on the first day of employment;
* Knowledge on polymers, analytical techniques (thermal, optical, mechanical) and plastics manufacturing processes (injection molding, extrusion compounding, lamination, 3D printing);
* Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint) and Microsoft Teams;
* Self-starter, self-motivated, with ability to complete project goals on time with attention to detail and high quality of work;
* Strong interpersonal skills, a collaborative mindset, maturity and good judgment;
* Excellent communication skills, both oral and written;
* Demonstrated ability to maintain high standards of confidentiality;
PREFERRED QUALIFICATIONS
* Previous internship or work experience in similar functions/business units;
* Coursework or lab experience in polymers, optics, or plastic part design;
* Familiarity with SolidWorks, Excel Macro, Minitab, or Moldflow;
Pay Range: $25/hr - Undergraduate. $32/hr - Graduate.
Employee pay is determined by multiple factors, including geography, experience, qualifications, skills and local minimum wage requirements. In addition, you may also be offered a competitive bonus and/or commission plan, which complements a first-class total rewards package. Benefits may include health care, retirement savings, paid time off/vacation, and various employee discounts.
EssilorLuxottica complies with all applicable laws related to the application and hiring process. If you would like to provide feedback regarding an active job posting, or if you are an individual with a disability who would like to request a reasonable accommodation, please call the EssilorLuxottica SpeakUp Hotline at ************ (be sure to provide your name, job id number, and contact information so that we may follow up in a timely manner) or email ********************************.
We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, national origin, social origin, social condition, being perceived as a victim of domestic violence, sexual aggression or stalking, religion, age, disability, sexual orientation, gender identity or expression, citizenship, ancestry, veteran or military status, marital status, pregnancy (including unlawful discrimination on the basis of a legally protected pregnancy or maternity leave), genetic information or any other characteristics protected by law. Native Americans in the US receive preference in accordance with Tribal Law.
.job Title{
display:none !important;
}
Job Segment:
Facilities, Social Media, Supply, Seasonal, Part Time, Operations, Marketing, Retail
Engineering Technical Sales Internship
Engineering internship job in Hartford, CT
Own your future as an intern at Ecolab! Our internship program provides you with invaluable insights from leaders across Ecolab, engaging and challenging projects, opportunities for personal and professional growth, extensive networking, and the chance to immerse yourself in our innovative and dynamic environment.
Ecolab is seeking Engineering Technical Sales Interns to join our summer 2026 technical sales internship program. You will help identify and propose solutions to preserve energy and water, minimize our customers' environmental footprint and increase productivity. You will combine a traditional engineering approach with a consultative sales approach focused on strong account leadership skills and retention of strategic accounts. You will also learn how to build long-term relationships with a large customer base by understanding their key business drivers, providing strategic resolution through hands-on problem solving, and offering new digital technology solutions.
What's in it For You:
* The opportunity to take on some of the world's most meaningful challenges, helping customers achieve clean water, safe food and healthy environments
* The ability to make an impact and shape your career with a company that is passionate about growth
* The support of an organization that believes it is vital to include and engage diverse people, perspectives and ideas to achieve our best
* Apply what you learn in the classroom to meaningful projects that have genuine business impact
* Finish your internship with a realistic job preview of what a "day in the life" of an Ecolab associate looks like
* Be considered for a full-time job offer (to start upon graduation) at the end of a successful internship into an Associate District Representative role.
What You Will Do:
* Complete an independent project(s) under primary trainer's direction to yield calculated ROI
* Complete safety training & technical lessons that serve as an introduction to water treatment applications
* Observe and participate in service as it is provided to customers to assure accurate chemical application, process optimization and documentation
* Complete introductory training of the consultative sales approach
* Visit multiple customer sites across the region (40-100% of training time spent in field) to learn best practices and types of unit applications and treatment approaches
* Build key relationships and interaction with departments and personnel that will be critical to success in the field
* Work within various regional sales districts and customer locations to build specific technical knowledge and gain sales experience while helping customers achieve their sustainability goals.
* Provide routine service support to Sales Representative. May be subject to testing includes Boilers, Cooling towers, Closed loops, R.O. and filtration.
Position Details:
* 11-week paid internship program, starting on Monday, June 1st
* Willing to relocate within the United States. Nationwide locations available
* Relocation assistance may be available
* Opportunity for a hybrid work environment, balancing field days with working remotely
Minimum Qualifications:
* Pursuing undergraduate degree in Engineering (Chemical, Mechanical, Environmental, Industrial) graduating in December 2026 or Summer 2027
* Immigration sponsorship not available for this role
* 11-week paid internship program, starting on Monday, June 1st
* Position requires a valid US Driver's License and acceptable motor vehicle record and access to a personal vehicle
Physical Demands:
* Position requires lifting/pushing/carrying up to 50 pounds chest high
About Ecolab
A trusted partner at nearly three million customer locations spanning over 170 countries, Ecolab is the global leader in water, hygiene and infection prevention solutions and services. Our team delivers comprehensive solutions, data-driven insights and personalized service to advance food safety, maintain clean and safe environments, optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, hospitality and industrial markets.
When you come to work at Ecolab, you get to take on some of the world's most meaningful challenges and have the opportunity to learn and grow, shape your career, make an impact and quickly see the importance of your work.
Annual or Hourly Compensation Range:
$23.00 - $25.00 per hour. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws.
Benefits
Ecolab provides the following benefits: medical, dental, vision, life insurance, accident insurance, critical illness insurance, hospital indemnity insurance, auto insurance, home insurance, pet insurance, identity theft protection, short-term and long-term disability, 401k, pension plans, retirement health care benefits, short-term incentives, vacation (12 days), holidays, parental leave, employee stock purchase plans (Full-Time Associates), discount on day care services and caregiver services, adoption assistance, group legal services, employee assistance program, employee discount program, and education assistance program, on-Site childcare and fitness facilities may be available at select Ecolab locations. Click here for additional benefits information. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here.
Potential Customer Requirements Notice
To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to:
* Undergo additional background screens and/or drug/alcohol testing for customer credentialing.
* Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab.
Americans with Disabilities Act (ADA)
Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website.
Auto-ApplyPackaging Engineering Intern: Summer - Fall 2026
Engineering internship job in Trumbull, CT
**_About_** **_this_** **_Position_** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Dial , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow.
This position is with our Consumer Brands business unit - where we empower our employees to bring the best Laundry & Home Care and Hair products to people around the world.
**Dare to learn new skills, advance in your career and make an impact at Henkel.**
**What you'll do**
+ Collaborate with cross-functional teams to support the development and launch of new packaging solutions
+ Test new packaging components to ensure compliance with performance and regulatory standards
+ Assist engineers with daily tasks related to packaging development and validation
+ Write and maintain packaging specifications and documentation
+ Support packaging-related project activities and timelines
+ Contribute to continuous improvement initiatives in packaging processes and systems
**What makes you a good fit**
+ An undergraduate student (sophomore, junior, senior) pursuing a degree in Packaging Engineering.
+ Packaging Knowledge: Foundational understanding of packaging materials, formats, and processes.
+ Communication & Collaboration: Comfortable working across teams and effectively communicating with stakeholders at all levels.
+ Adaptability & Learning Agility: Eager to take on new challenges, quickly learn new systems, and apply knowledge to real-world projects.
+ Technical Skills: Proficient in Microsoft Office Suite (Excel, Word, PowerPoint); exposure to pallet design software such as CAPE or TOPS is a plus.
**Some benefits of joining Henkel as an intern**
+ Exciting projects that allow you to make real impact and collaborate with Henkel colleagues worldwide.
+ Countless learning opportunities available through Henkel's online learning platform with over 9,000 professional courses.
+ Networking events with Henkel business leaders, experts and sustainability ambassadors.
+ Ongoing feedback discussions throughout the internship that allow you to accomplish concrete goals.
+ In-person and virtual social events to connect with other Henkel interns across the country.
**Following your internship, you may be invited to join Henkel as a returning intern or full-time employee. **
**Additional information**
+ This internship is eligible for a housing stipend or relocation support.
+ The anticipated start date for this internship is June 15, 2026, and the anticipated end date is December 18, 2026.
+ Recruitment for our 2026 internships starts in late August 2025 and runs through early March 2026 or until all our positions are filled.
+ If selected to move forward in our recruitment process, you will receive an email from our talent acquisition team.
+ If a position you applied to is filled by another candidate, you will receive an email from our team alerting you that the position is closed.
The salary for this role is $22-$27/hour. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future.
Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories.
**JOB ID:** req75278
**Job Locations:** United States, CT, Darien, CT | United States, CT, Stamford, CT | United States, CT, Trumbull, CT
**Contact information for application-related questions:** *****************************
Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted.
**Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application
**Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with.
Activate external content
When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information.
**Accept for all YouTube content**
Deactivate loading external content from YouTube.
How is work at Henkel
Easy ApplyInternship - Water Resources Engineer
Engineering internship job in New Haven, CT
Department
Engineering
Employment Type
Internship
Location
New Haven, CT
Workplace type
Hybrid
Compensation
$25.00 / hour
Key Responsibilities Skills, Knowledge and Expertise Why You'll Love Working with Us About Fuss & O'Neill Fuss & O'Neill is a civil and environmental engineering firm that provides client-specific, forward-thinking, and holistic solutions. Since 1924, we have made it our mission to improve the built and natural environments in response to our public and private clients' evolving needs.
Summer 2025 Engineering Internship
Engineering internship job in Stafford, CT
TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market.
Additional information can be found at ***********
Scope:
We are seeking a self-motivated Process Engineering Intern to join our team at our Stafford Division. In this role, you will have the opportunity to work on high-impact projects that drive our technology forward. While specific projects will be determined closer to your start date, your responsibilities will generally include:
Responsibilities:
* Collaborate with cross-functional teams to design, develop, and test electrical systems and components.
* Participate in brainstorming sessions and contribute to innovative solutions for real-world engineering problems.
* Assist in the development of prototypes and the execution of testing protocols.
* Support senior engineers in analyzing data and preparing technical reports.
* Engage in continuous learning and professional development opportunities.
* Complete a final presentation to the site leadership team.
What We Offer
* A collaborative and innovative work environment
* Mentorship from experienced engineers and industry leaders
* Opportunities for professional growth and development
* Exposure to a variety of projects and technologies
* Company-wide networking opportunities
Qualifications
* Currently pursuing a degree in Engineering (Mechanical, Chemical, Automation, or Electrical preferred)
* Anticipated graduation date no later than December 2026
* Strong foundational knowledge of electrical systems, circuits, and design principles.
* Proficiency with relevant engineering software and tools (e.g., MATLAB, Solidworks, AutoCAD, Python, C++)
* Excellent problem-solving skills and attention to detail.
* Strong communication and teamwork abilities.
#LI-CG1
Compensation:
Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations.
Export Statement:
Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
Auto-ApplyIntern - Software Engineering
Engineering internship job in Bloomfield, CT
At Labcorp, we believe in the power of science to change lives. We are nearly 70,000 people across 100 countries who are harnessing science for human good. Our work combines unparalleled diagnostic laboratories, drug development capabilities and commercial innovations. Together, we fuel scientific breakthroughs and deliver more than 160 million medical test results that help guide treatment decisions, accelerate patient care and change lives.
Join us in our pursuit of answers.
Labcorp 2026 Global Internship Program Exciting Internship Opportunity - Software Engineer Intern in Bloomfield, Connecticut!
Join Labcorp's 2026 Global Internship Program and take the first step toward a meaningful career in healthcare innovation! We're looking for motivated students to be part of a dynamic 12-week paid internship where you'll work on impactful projects and gain real-world experience, all while supporting our mission to improve health and improve lives.
Internship 2026 Dates: May 18, 2026 - August 7, 2026
About the Program
As a Labcorp intern, you'll be immersed in hands-on work that complements your academic background. In addition to your project work, you'll gain valuable exposure to Labcorp's global business, culture, and leadership through:
Enterprise-wide learning experiences that introduce you to key business functions across Labcorp
Leadership exposure and visibility, including direct interaction with senior leaders
An immersive, in-person intern event June 2-4, 2026, designed to connect you with peers and deepen your understanding of our mission
Senior leader speaker sessions offering insights into strategy, innovation, and career growth
Continuous opportunities to connect and grow, from intern cohort communication channels and LinkedIn Learning resources to professional development sessions and storytelling opportunities that highlight your internship journey
Connection to Labcorp's inclusive culture through engagement with our employee resource groups (ERGs)and values-driven community initiatives
Dedicated mentoring connections to guide your growth, provide career advice, and support your internship journey
Internship Details
Duration: 12 weeks, full-time
Dates of Internship: May 18, 2026 - August 7, 2026
Location: Bloomfield, Connecticut
Compensation: Paid internship; relocation assistance available for qualified candidates
Eligibility: Preferred candidates are rising juniors and seniors (Dec 2026 through June 2028 graduation) who are currently enrolled in a relevant degree program; however, all current students pursuing related studies are encouraged to apply.
Why Labcorp?
In 2025, we welcomed over 300 interns across our global offices. As part of the 2026 cohort, you'll join a diverse community of future leaders working to shape the future of diagnostics, biopharmaceutical lab services, corporate functions, and healthcare delivery.
Ready to make a difference?
Apply now to launch your career and create real impact for patients worldwide. #FutureofLabcorp
About the Team:
The Software Engineering Department at the Protedyne subsidiary of Labcorp develops smarter, faster robots to optimize efficiency in Labcorp's diagnostic testing laboratories across the world. The team is responsible for all levels of software management, from device firmware, industrial automation and robotics control through user interfaces, remote monitoring and database management.
Internship Assignment Summary:
Develop and support User Interface and User Interaction software for a complex laboratory automation system
Develop and support application-level software for laboratory robots
Perform testing software and provide feedback to the appropriate team
Education/Qualifications/Skills:
Working towards bachelor's degree in software engineering, electrical engineering or a related field
Experience with an integrated software development environment (IDE) such as VS Code, Eclipse or IntelliJ
Experience with a desktop programming language such as Java, C++ or Python or with a web development stack such as MEAN or WARN
Embraces diverse perspectives through partnerships and teamwork
This position is not eligible for visa sponsorship
Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. For more detailed information, please click here.
Labcorp is proud to be an Equal Opportunity Employer:
Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law.
We encourage all to apply
If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.
Auto-ApplyWater Resource Engineer - Summer Intern
Engineering internship job in Cheshire, CT
Ready to turn your classroom knowledge into real impact? Join our team in Cheshire, CT, and work alongside experienced engineers who are shaping the future of resilient water infrastructure across New England!
This internship offers candidates the opportunity to work on a wide range of water-resource-related projects, including stream and river restoration, bank erosion monitoring, turbidity reduction, flood mitigation, geomorphic assessment, and design of culverts to accommodate aquatic organism passage.
We are SLR Consulting (US), a 500+ coast-to-coast team of advisory, environmental/engineering, and regulatory professionals. We deliver environmental and sustainability services to our clients through the integration of over 30 advisory, technical environmental, and engineering disciplines to help clients address some of their most complex challenges around sustainability. We are Making Sustainability Happen.
As our new Water Resource Engineer Intern, you will play an important role on a team whose work is essential to achieving this goal.
Responsibilities:
Support the planning, analysis, and design of water resources and stormwater projects, including hydraulic/hydrologic modeling, watershed studies, flood mitigation, green infrastructure, and stream restoration.
Assist with data collection, GIS mapping, field evaluations, and construction observation.
Work with engineering teams to prepare drawings, technical reports, and project documentation.
Contribute to innovative, sustainable solutions that protect communities and improve water quality.
Working @ SLR
With us, there is no doubt you'll grow your subject-matter expertise and industry knowledge. We care about investing in our employees for the long-run, and if you ask our team, they'll tell you that's just one of the many benefits of working here. We want to be a place where you can experience career growth and satisfaction for many years.
Here's what else you'll enjoy as part of our team:
SLR offers internships to help students get practical work experience in their chosen field. The internship is a temporary, seasonal position beginning in May through August 2026.
The hourly range for this position is $20- $25. Final agreed upon compensation will be commensurate with individual education, professional designation, experience, internal parity, and location.
This is a non-benefits eligible position.
Qualifications/Education/Memberships:
Pursuing a B.S. or M.S. in Civil Engineering, Environmental Engineering, Water Resources, or a related discipline.
Coursework or interest in hydrology/hydraulics, stormwater management, or environmental systems.
Experience with GIS, Civil3D, HEC-RAS, HEC-HMS, or similar tools
a plus.
Strong communication skills, eagerness to learn, and a collaborative mindset.
Valid driver's license and ability to support field work as needed.
Proficient with Microsoft Office Suite of software.
Diversity, equity, and inclusion (DE&I) are at the core of who we are and want to be.
SLR is proud to be an Equal Employment Opportunity / Affirmative Action Employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, gender, sexual orientation, civil union status, age, citizenship, marital status, disability, gender identity or expression, genetic information, or veteran status.
At SLR, we embrace diverse cultures, perspectives, skills, and experiences within and outside our organization. We respect and celebrate differences and want to ensure that we continuously strive to build a place where everyone feels included and is encouraged to be their authentic self.
We are committed to these values, and our SLR Culture & Diversity Team works to actively promote diversity, equity, and inclusion across our people and talent processes, operations, and client work around the world. If you have a disability and need reasonable accommodations at any point in the application or interview process, please contact us at careers-us@slrconsulting.
Auto-ApplyMechanical Engineering Aide - (Ludlow, MA)
Engineering internship job in Ludlow, MA
As a Mechanical Engineering Aide, you won't just be observing you will be hands-on with real satellite communications hardware from day one at our Ludlow, MA office. Your projects will span refurbishment, repair, production, and redesign of advanced antenna systems and pedestals, including the Navy Multiband Terminal (NMT) program.
This is a Part-Time opportunity
Working side-by-side with a team of senior engineers eager to mentor you, you will:
Test and troubleshoot motors, bearings, supports, and other precision mechanical components.
Design and model components using SolidWorks, delivering 3D CAD models and fabrication-ready drawings.
Build and refine custom fixtures, tools, and mechanical assemblies for production and testing.
Innovate on next-gen systems-from brainstorming new concepts to supporting production launches.
Get exposure to antenna testing facilities, rapid prototyping, and real-world defense-grade engineering.
This role is perfect for students who want to:
Gain practical, resume-boosting experience that stands out in job interviews.
Work directly on mission-critical systems used in defense and global communications.
Learn from industry experts in a collaborative, supportive environment.
Get a competitive edge with exposure to advanced tools, testing ranges, and design processes.
In this role, you will:
Take part in real-world engineering projects from concept to production, gaining exposure to all stages of the design cycle;
Design & Development
Research, design, and document mechanical solutions-from concept sketches to production-ready parts.
Create system and component block diagrams, evaluate design tradeoffs, and perform mechanical and thermal analyses using advanced CAD tools.
Assist in developing assembly aids, test fixtures, and custom tooling to support production and testing.
Collaboration & Mentorship
Work closely with senior mechanical engineers and the electrical engineering team to define and refine electromechanical requirements.
Partner with test technicians and operations teams to build, assemble, and test prototypes.
Take part in design reviews (preliminary, critical, production readiness) to learn how ideas evolve into real hardware.
Testing & Validation
Support product qualification testing and troubleshooting efforts to ensure systems meet performance goals.
Gain hands-on experience with antenna testing ranges, environmental testing, and performance analysis.
Documentation & Professional Skills
Contribute to the creation of manufacturing documentation packages and other engineering deliverables.
Learn to work within structured engineering processes like the Serco Gate Review process.
Build strong professional habits: punctuality, confidentiality, ethics, and collaboration with peers and customers.
GET TO KNOW YOUR RECRUITER!
Qualifications
To be successful in this role, you will have:
U.S Citizenship required
High School Diploma/GED
Students currently pursuing an Engineering Degree at an accredited bachelor's program
Rising Juniors and Seniors Preferred
Class experience in CAD modeling and analysis (Solidworks experience preferred)
Strong communication skills and a professional demeanor
Ability to work in a highly dynamic environment
Self-motivated with a strong work initiative
Strong critical thinking and problem-solving skills
Ability to work well against deadlines and adapt to change
Proficient with PC and MS Office Suite
Additional desired experience and skills:
Introductory knowledge of Geometric Dimensioning & Tolerancing (GD&T) is a plus
Introductory knowledge in creating detailed part and assembly drawings to ASME Y14.5 drawing standards is a plus
If you are interested in supporting and working with a passionate Serco team- then submit your application now for immediate consideration. It only takes a few minutes and could change your career!
In compliance with state and local laws regarding pay transparency, the salary range for this role is $39,330.26 to $58,995.39; however, Serco considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills.
Company Overview
Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters.
To review Serco benefits please visit: ************************************************************ If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email.
Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice.
Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email *********************.
Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.
Auto-ApplyStafford Springs Engineering Internship Summer 2026
Engineering internship job in Stafford Springs, CT
TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer
About TTM
TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency (“RF”) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (“PCBs”). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market.
Additional information can be found at ***********
Scope:
Internships are designed to help build your professional credentials by providing meaningful, practical, on-the-job training and experiences, while also igniting your imagination. TTM offers internships to qualified Engineering students who are looking to gain professional experience in the field of engineering and manufacturing technology.
Opportunities exist throughout our company and are available to students who are motivated to learn and grow. You will get a chance to contribute your best ideas and work in an environment that inspires innovative results. Students in our internship program provide tremendous value to our organization through increased productivity, introduction of innovative, fresh ideas and talent, and often become reliable and skilled permanent employees.
The TTM Engineering Internship Program is geared toward conscientious Engineering students. It is a stimulating and rewarding experience, helping the student make the transition from school to work and career while motivating the student for a potential manufacturing, engineering and technology future. Participating in one of our internships is also invaluable in establishing a network within the company.
Selected candidates will work at either the Stafford or Stafford Springs locations.
Essential Knowledge and Skills:
A basic understanding and strong interest in analog and digital electronics and/or microwave theory.
Interest in software development and exposure to a programming language.
Interest in test and process automation.
Comfortable with hands-on work (manual trial testing, soldering, fixture assembly).
Strong interpersonal skills.
Strong time management skills.
Strong analytical ability and exceptional attention to detail.
Strong computer skills, specifically Microsoft Office.
Actively pursues opportunities to expand job-related knowledge.
Strong written and verbal communication skills.
Education and Experience:
The student must be enrolled in an accredited college or university technical undergraduate program
Junior going into their Senior year of college, scheduled to graduate by December 2027 at the latest.
Student must also be in good academic standing.
Demonstrated technical ability and aptitude to develop and work on engineering projects.
Program Outline
:
Each intern will be an integral part of an engineering team by having the opportunity to work on at least one major development or production program.
To help guide and serve as a resource, a manager and a mentor/champion will be assigned to each intern.
Interns will present a final presentation to the site leadership team.
The program offers additional opportunities for professional, career and leadership development through training and team building events.
#LI-PG1
Compensation:
Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations.
Export Statement:
Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
Auto-ApplyWater Engineering Intern
Engineering internship job in Middletown, CT
Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together.
Role description:
We are currently seeking a Water Engineer Co-Op or Intern to join our Water Business Line in our Wakefield, MA office in Summer 2026.
We work to protect our natural environment and water resources, while powering our world for future generations. Around the world, we're feeling the effects climate change, rapid urbanization, loss of biodiversity. The rate at which we're seeing large-scale, unforeseen events such as floods and wildfires, is becoming more frequent. We are here to protect our natural environment and water resources, while powering our world for future generations.
Role accountabilities:
As a Water Engineer Co-Op/Intern, you will have the opportunity to gain valuable hands-on experience in various aspects of water engineering projects. Your role will involve evaluating, planning, designing, and supporting the management of projects related to water/wastewater/stormwater treatment and conveyance, including pipelines and pumping facilities. You will also be involved in assessing, developing, and supporting the management of sustainability and resilience projects, which include vulnerability and mitigation assessments, as well as planning and design for utilities, municipalities, and cities.
Fieldwork activities will be an integral part of your experience, where you will have the chance to conduct site visits, perform sampling, conduct water quality analyses, evaluate technologies, gather plant operations information, troubleshoot processes, and optimize systems.
Additionally, you will have the opportunity to support Asset Management projects by performing data analytics, operational and organizational assessments, condition assessments, and overall performance evaluations of water/wastewater/stormwater facilities.
In addition, you will be responsible for the following:
* Support preparation of reports, presentations, and other audio-visual materials, and participate in client meetings.
* Ensure project compliance with all Arcadis practices and quality, health and safety standards, and facilitate coordination for timely completion and submission of projects on time and budget.
* Work independently and as part of a team, with the flexibility to accommodate collaboration with team members across the U.S. and internationally.
* Learn and use digital tools to enhance customer experience, team and client collaboration, and project delivery including configuration and deployment of SharePoint, Building Information Modeling (BIM), Power BI, and Augmented Reality.
What skills do you need?
* Strong attention to detail, organization skills, and work ethic
* The initiative and ability to take on new projects and other challenges regularly.
* Excellent communication skills, both written and verbal.
* Self-motivated, team-oriented and flexible, with the ability to balance and address new challenges as they arise
* Exceptional analytical and problem-solving skills.
* Knowledge of engineering concepts, theories, and practices related to water/wastewater/stormwater.
* Proficient in Microsoft Office Excel, Word, and PowerPoint.
Qualifications & Experience:
Required Qualifications:
* Pursuing a BS in Civil, Environmental, or Water Resources Engineering, or another closely related academic discipline.
Preferred Qualifications:
* Prior internship or coursework in water/wastewater, water resources, or related sectors.
Why Arcadis?
We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together.
You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you.
Together, we can create a lasting legacy.
Join Arcadis. Create a Legacy.
Our Commitment to Equality, Diversity, Inclusion & Belonging
We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law.
Arcadis offers benefits for part-time, as needed positions. These benefits include EAP, 401K, and optional well being benefits. The salary range for this position is $22.20 - $33.30 per hour.
#LI-TB1
#EarlyCareersANA
#Resilience-ANA
#WATER-ANA
#LI-HYBRID
#SWE #WEPAN #AWIS #INWES #BWEC #NSBE #SHPE #AISES #oSTEM #SAME #SASE
Engineering Intern
Engineering internship job in Bloomfield, CT
Job Description
LiquidPiston, Inc. is a disruptive engine company based in Bloomfield, CT, developing compact, efficient, and powerful rotary engines based on our patented thermodynamic cycle and innovative X-Engine architecture. Our engines are poised to revolutionize applications across aerospace, defense, commercial, and automotive sectors. Join our mission to transform propulsion and power generation technology.
Location: Onsite in Bloomfield, CT. Will not consider remote.
Internship Overview:
We are seeking highly motivated and innovative Engineering Interns to join various teams within LiquidPiston. As an intern, you will have the opportunity to contribute to real-world engineering projects and gain hands-on experience in a fast-paced, R&D-focused environment.
Opportunities are available in the following departments:
Design Engineering
Aerospace Systems
Modeling & Simulation
Testing & Validation
Manufacturing / Machining
Key Responsibilities (by department):
1. Design Engineering
Support design and development of rotary engine components and subsystems using CAD tools (e.g., SolidWorks).
Perform tolerance analyses, DFMA reviews, and assist in prototype fabrication.
Collaborate with cross-functional teams on packaging, manufacturability, and integration challenges.
2. Aerospace Systems
Contribute to propulsion system integration for UAVs and other aerospace platforms.
Perform thermal and structural analyses under aerospace operating conditions.
Assist in compliance documentation and system-level testing.
3. Modeling & Simulation
Develop and run simulations for thermodynamic cycles and combustion analysis.
Use MATLAB, Simulink, GT-Power, ANSYS, or other modeling tools to support performance prediction and optimization.
Validate simulation results against experimental data.
4. Testing & Validation
Support test setup, data acquisition, and instrumentation for engine and component testing.
Analyze test data to identify trends, issues, and performance metrics.
Assist with writing test plans, procedures, and reports.
5. Manufacturing Engineering / Machinist
Operate and support CNC machining, manual lathe, and mill equipment for prototype and low-volume production.
Assist in fixture design, tool selection, and machining process planning.
Work closely with design engineers to evaluate manufacturability and implement design changes.
Maintain precision, quality control, and safety standards during part fabrication.
Gain hands-on experience with GD&T, CAM programming (e.g., Fusion 360 or Mastercam), and material selection.
Qualifications:
Currently pursuing a Bachelor's or Associate's degree in Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, or a related technical field. Technical trade school students will also be considered for machinist roles.
Strong analytical and problem-solving skills.
Experience with relevant tools depending on the department (e.g., SolidWorks, MATLAB, Python, LabVIEW, CNC equipment, CAM software).
Excellent communication and teamwork abilities.
Passion for innovation and technology development.
Preferred Skills (not required, but a plus):
Prior experience with internal combustion engines, power systems, or mechanical prototyping.
Knowledge of thermodynamics, fluid dynamics, or heat transfer.
Familiarity with electric drive systems, UAVs, or hybrid propulsion.
Hands-on experience in a shop environment or with machining equipment.
What You'll Gain:
Hands-on experience working with cutting-edge engine technologies.
Mentorship from experienced engineers and exposure to startup culture.
Opportunity to work on high-impact projects in aerospace and defense.
Practical manufacturing and prototyping skills in a real-world R&D environment.
Potential pathway to full-time employment.
Compensation:
Approximately $3000-3850/month depending on the year in school.
Our Culture
At LiquidPiston, we challenge convention and solve hard problems. We move fast, think boldly, and iterate quickly. Our team thrives on collaboration, creativity, and resilience. We take calculated risks and believe that every setback is a steppingstone toward breakthrough innovation.
Equal Opportunity Employer
LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, or veteran status, and will not be discriminated against on the basis of disability.
All offers of employment at LiquidPiston are contingent upon the successful completion of a pre-employment background check, drug screening and credit check.
Powered by JazzHR
3S5uplCaQa
Analytical Engineer Intern
Engineering internship job in Simsbury, CT
At Ensign-Bickford Aerospace & Defense Company (EBAD), we believe that our strengths are built on our most important resource - our people. Join EBAD and you'll be a part of a team who creates cutting edge technology that will blast us into the future. No other company can match the innovative energetic solutions that we provide. At EBAD you will actively contribute to successful missions putting men, women and satellites into space, and protecting our armed service men and women around the world. If this is the culture and work environment you are seeking, then EBAD is the place for you!
Job Description
Ensign-Bickford Aerospace and Defense Company is seeking talented college students to join our 2026 summer internship program. Our 12-week internship program is designed to provide real-world and hands-on experience in areas that interest you! As an intern, you will collaborate with industry experts to solve real-world challenges and change the way we do business.
Responsibilities:
The Analytical Engineer Intern will help perform thermal, structural, and functional modeling of energetic components and systems in support of the design and development of aerospace and defense programs. The intern will interact with design and project engineers to ensure design, analysis, and testing support development risk reduction. Duties include:
Develop analytical models to assess the ability of EBAD products to meet functional requirements.
Supporting project and operations teams by providing assistance
Support existing products and product upgrades
Participate in failure analysis activities
Perform reliability analysis of energetic systems
Requirements:
Pursuing a bachelor's degree in an Engineering field.
Strong written, verbal and presentation skills
Proficient with Microsoft office suite software.
SolidWorks experience is a plus.
As an EBI intern, you will:
Work on robust projects that prepare you for a full-time opportunity after graduation
Solve real-world challenges alongside industry experts
Receive competitive pay for your contributions
Showcase your project outcomes to leadership at the end of the summer
Participate in career discussions
Socialize through teambuilding and networking events
Learn more about career opportunities across our businesses
Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.
Auto-ApplyEngineering Internship - Summer 2026
Engineering internship job in Chicopee, MA
Job Description
Engineering Internship - Summer 2026
Make your mark on life-changing medical technology. At UFP Technologies, we transform innovative concepts into real-world medical products that improve lives. As an Engineering Intern, you'll gain hands-on experience across the entire product lifecycle-from design and prototyping to manufacturing and testing-all while being mentored by experienced engineers in a collaborative, fast-paced environment.
What You'll Experience
During your internship, you'll rotate through and contribute to key areas of our engineering process, including:
Customer Interaction - Understand client needs and how they drive design.
Program Management - See how complex projects are planned and executed.
Design & Fabrication - Turn ideas into functional prototypes.
Measurement & Analysis - Learn to test and evaluate performance.
Problem Solving - Apply your engineering skills to real manufacturing challenges.
You'll also work closely with a mentor to set meaningful goals, participate in product and process design discussions, and contribute to technical reports, data collection, and process improvements.
Program Details
Application Deadline: January 15, 2026
Interviews Begin: Late January 2026
Start Date: Mid to late May 2026
End Date: Late August or early September 2026
Schedule: Full-time (40 hours/week), Monday-Friday
Location: On-site in Chicopee, MA (no housing or transportation provided; local candidates within 45 minutes preferred)
Pay Range: $20-$30 per hour. Final compensation will be determined based on market data, geographic location, and the candidate's qualifications and experience.
What We're Looking For
Currently pursuing a Bachelor's degree in Mechanical or Biomedical Engineering from an accredited university.
Familiarity with CAD software (SolidWorks preferred).
Strong computer skills, including Word and Excel.
Excellent written and verbal communication skills.
Detail-oriented and eager to learn.
Previous internship or co-op experience is a plus.
Must be authorized to work in the U.S. (no visa sponsorship available).
Why UFP Technologies?
At UFP MedTech, you'll be part of a team dedicated to innovation, collaboration, and quality. You won't just observe-you'll contribute. Our interns leave with valuable hands-on experience, industry knowledge, and connections that help launch their engineering careers.
About UFP MedTech:
UFP Technologies is a designer and custom manufacturer of comprehensive solutions for medical devices, sterile packaging, and other highly engineered custom products. UFP is an important link in the medical device supply chain and a valued outsource partner to most of the top medical device manufacturers in the world. The Company's single-use and single-patient devices and components are used in a wide range of medical devices and packaging for minimally invasive surgery, infection prevention, wound care, wearables, orthopedic soft goods, and orthopedic implants.
UFP Technologies, Inc. is an Equal Opportunity/Affirmative Action employer Minorities/Women/Veterans/Disabled.
To apply for this opportunity please create a profile with us through our online application system. Click the "Apply" box in the upper right hand corner to start the application process. Or, if you already have a social media account with LinkedIn, Google, or Facebook you can use your log in credentials to apply.
#UFP #MEDTECH #INTERN #CHIC
EC&A Project Engineering Intern (Summer 2026)(Onsite)
Engineering internship job in Windsor Locks, CT
Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Security Clearance:
None/Not Required
Are you ready to explore the world of aerospace and defense? Do you want to learn from and collaborate with some of the greatest minds in the industry? At RTX, our internships, co-ops, and full-time careers provide an exceptional foundation to work on complex problems, advance your skills and create a safer, more connected world. Discover opportunities to make a difference at RTX.
As a Project Engineering Intern at Collins Aerospace you will work with a multi-disciplined, technical design and project management team in executing the engineering design process, in a fast-paced engineering environment, for development and integration of engineered systems and components. This team works across the full range of the product life cycle for digital controllers including software development, hardware improvements, obsolescence management, and cyber security. The Collins Engine Controls & Accessories (EC&A) customer value stream, a part of Power and Controls, serves various engine and airframe customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight.
What You Will Do:
* Work with the Project Engineering lead on the program to drive the program forward.
* Assign and drive action items from meetings to closure.
* Support reviews and design efforts.
* Communicate clearly with the supporting team members to ensure proper program execution and to meet schedule needs.
* Coordinate required testing activities with the shop floor or selected test houses.
Qualifications You Must Have:
* Requires a High School Diploma or equivalent and student must be pursuing a Bachelor's or advanced degree in an applicable discipline.
* U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Qualifications We Prefer:
* Pursuing a degree in Electrical Engineering or equivalent.
Learn More and Apply Now!
Collins Aerospace, a RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market.
We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems, or creating a positive in flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight!
WE ARE REDEFINING AEROSPACE.
* Please consider the following role type definitions as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings.
At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again.
Apply now and be part of the team that's redefining aerospace, every day.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 37,000 USD - 82,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Auto-ApplyApplication Engineering Intern - Summer 2026
Engineering internship job in Rocky Hill, CT
**_About_** **_this_** **_Position_** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Loctite , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Adhesive Technologies business unit - where we empower our people to transform industries and provide our customers with a competitive advantage through adhesives, sealants and functional coatings.
**Dare to learn new skills, advance in your career and make an impact at Henkel.**
**What you'll do**
As an Application Engineering Intern for our brands Loctite, Teroson, Technomelt or Aquence, you will:
+ Gain hands-on experience in adhesive technologies and their industrial applications.
+ Conduct laboratory tests to evaluate product suitability for specific applications.
+ Collect and analyze test data to support data-driven decision-making..
+ Prepare technical documentation and summaries to support value-based discussions with stakeholders
+ Collaborate with technical and commercial teams to understand customer needs and product performance.
**What makes you a good fit**
+ An undergraduate student graduating in 2027, 2028 or 2029 pursuing a degree in Chemical Engineering or Mechanical Engineering
+ Experience in planning and conducting experiments in a laboratory.
+ Experience in designing experiments and analyzing data using statistical means (JMP, Minitab, MS Excel)
+ Experience in building presentations and training materials and then delivering these to an audience
**Some benefits of joining Henkel as an intern**
+ Exciting projects that allow you to make real impact and collaborate with Henkel colleagues worldwide
+ Countless learning opportunities available through Henkel's online learning platform with over 9,000 professional courses
+ Networking events with Henkel business leaders, experts and sustainability ambassadors
+ Ongoing feedback discussions throughout the internship that allow you to accomplish concrete goals
+ In-person and virtual social events to connect with other Henkel interns across the country
+ Following your internship, you may be invited to join Henkel as a returning intern or full-time employee.
**Additional information**
+ This internship is NOT eligible for a housing stipend or relocation support.
+ Henkel's Summer 2026 internship program starts on May 27th, 2026, and runs through mid-August. br>
+ Recruitment for our 2026 internships starts in late August 2025 and runs through early March 2026 or until all our positions are filled.
+ If selected to move forward in our recruitment process, you will receive an email from our talent acquisition team.
+ If a position you applied to is filled by another candidate, you will receive an email from our team alerting you that the position is closed.
The salary for this role is $22-$27/hour. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future.
Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories.
**JOB ID:** req75307
**Job Locations:** United States, CT, Rocky Hill, CT
**Contact information for application-related questions:** *****************************
Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted.
**Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application
**Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with.
Activate external content
When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information.
**Accept for all YouTube content**
Deactivate loading external content from YouTube.
How is work at Henkel
Easy ApplyElectrical Engineering Aide - (Ludlow, MA)
Engineering internship job in Ludlow, MA
As an Electrical Engineering Aide, you won't just be observing, you will be hands-on with real electronics hardware and antenna systems from day one at our Ludlow, MA office. Your projects will include RF and antenna testing, circuit and subsystem design, troubleshooting, and documentation for advanced communications and defense platforms.
This is a Part-Time opportunity
Working side-by-side with a team of senior engineers eager to mentor you, you will:
Design and analyze system and component block diagrams, selecting and evaluating electrical and RF components using CAD tools.
Perform detailed circuit and subsystem design, creating solutions that meet strict performance and reliability requirements.
Debug, tune, and test prototype and pilot production units to ensure electrical and RF performance.
Conduct RF testing and characterization using state-of-the-art RF measurement and metrology equipment.
Get hands-on experience in our Near-Field and Compact Antenna Ranges, learning how antenna systems are tuned, aligned, and validated.
Develop and refine assembly aids, test fixtures, test procedures, and custom test stations to support production and validation.
Collaborate with program management, operations, quality assurance, and cross-functional engineering teams to bring designs from concept to production.
This role is perfect for students who want to:
Gain resume-boosting, hands-on RF and electrical engineering experience with real-world applications.
Work directly on mission-critical antenna and communication systems used in defense and satellite communications.
Learn from industry experts and see professional design and review processes like the Serco Gate Review process.
Build a competitive career edge through exposure to advanced test equipment, antenna ranges, and cross-functional workflows.
In this role, you will:
Take part in real-world electrical and RF engineering projects from concept to production, gaining exposure to every stage of the design cycle;
Design & Development
Research, design, and document circuit, RF, and subsystem solutions-from initial concepts to production-ready designs.
Create system and component block diagrams, evaluate component options, and perform electrical and RF analyses using advanced CAD tools.
Assist in developing assembly aids, antenna alignment fixtures, and RF test stations to support production and validation.
Write software tools to automate testing and analyze test results.
Collaboration & Mentorship
Work closely with senior electrical engineers, RF specialists, and program managers to refine requirements and deliver solutions.
Partner with operations, manufacturing, and test teams to assemble, integrate, and verify prototypes.
Participate in design reviews (preliminary, critical, production readiness) to see how ideas evolve into field-ready hardware.
Testing & Validation
Perform RF and antenna testing, including calibration, tuning, and performance characterization.
Support system-level qualification testing and structured validation processes for defense-grade systems, including shock, vibration, and thermal stress testing.
Gain hands-on experience with RF diagnostic tools, network analyzers, spectrum analyzers, and antenna measurement systems.
Documentation & Professional Skills
Contribute to manufacturing documentation packages and engineering deliverables.
Learn to navigate structured engineering workflows like the Serco Gate Review process.
Build strong professional skills: technical communication, teamwork, customer interaction, confidentiality, and engineering ethics.
GET TO KNOW YOUR RECRUITER!
Qualifications
To be successful in this role, you will have:
U.S. Citizenship required
High School Diploma/GED
Students currently pursuing an Electrical Engineering (or related) degree at an accredited bachelor's program
Rising Juniors and Seniors preferred
Proficiency with RF test equipment, including RF sources and analyzers
MATLAB proficiency for data analysis and visualization
Ability to read and analyze circuits and schematics
Strong communication skills and a professional demeanor
Ability to work in a highly dynamic environment and adapt to change
Self-motivated with a strong work initiative and problem-solving skills
Proficiency with PC and MS Office Suite
Additional desired experience and skills:
Working understanding of antenna theory is a plus
Familiarity with LabVIEW, CAD, and EDA tools is a plus
If you are interested in supporting and working with a passionate Serco team- then submit your application now for immediate consideration. It only takes a few minutes and could change your career!
In compliance with state and local laws regarding pay transparency, the salary range for this role is $39,330.26 to $58,995.39; however, Serco considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills.
Company Overview
Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters.
To review Serco benefits please visit: ************************************************************ If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email.
Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice.
Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email *********************.
Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.
Auto-ApplyWater Engineering Intern
Engineering internship job in Middletown, CT
Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets.
We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together.
Role description: We are currently seeking a Water Engineer Co-Op or Intern to join our Water Business Line in our Wakefield, MA office in Summer 2026. We work to protect our natural environment and water resources, while powering our world for future generations. Around the world, we're feeling the effects climate change, rapid urbanization, loss of biodiversity. The rate at which we're seeing large-scale, unforeseen events such as floods and wildfires, is becoming more frequent. We are here to protect our natural environment and water resources, while powering our world for future generations. Role accountabilities: As a Water Engineer Co-Op/Intern, you will have the opportunity to gain valuable hands-on experience in various aspects of water engineering projects. Your role will involve evaluating, planning, designing, and supporting the management of projects related to water/wastewater/stormwater treatment and conveyance, including pipelines and pumping facilities. You will also be involved in assessing, developing, and supporting the management of sustainability and resilience projects, which include vulnerability and mitigation assessments, as well as planning and design for utilities, municipalities, and cities. Fieldwork activities will be an integral part of your experience, where you will have the chance to conduct site visits, perform sampling, conduct water quality analyses, evaluate technologies, gather plant operations information, troubleshoot processes, and optimize systems. Additionally, you will have the opportunity to support Asset Management projects by performing data analytics, operational and organizational assessments, condition assessments, and overall performance evaluations of water/wastewater/stormwater facilities. In addition, you will be responsible for the following:
Support preparation of reports, presentations, and other audio-visual materials, and participate in client meetings.
Ensure project compliance with all Arcadis practices and quality, health and safety standards, and facilitate coordination for timely completion and submission of projects on time and budget.
Work independently and as part of a team, with the flexibility to accommodate collaboration with team members across the U.S. and internationally.
Learn and use digital tools to enhance customer experience, team and client collaboration, and project delivery including configuration and deployment of SharePoint, Building Information Modeling (BIM), Power BI, and Augmented Reality.
What skills do you need?
Strong attention to detail, organization skills, and work ethic
The initiative and ability to take on new projects and other challenges regularly.
Excellent communication skills, both written and verbal.
Self-motivated, team-oriented and flexible, with the ability to balance and address new challenges as they arise
Exceptional analytical and problem-solving skills.
Knowledge of engineering concepts, theories, and practices related to water/wastewater/stormwater.
Proficient in Microsoft Office Excel, Word, and PowerPoint.
Qualifications & Experience: Required Qualifications:
Pursuing a BS in Civil, Environmental, or Water Resources Engineering, or another closely related academic discipline.
Preferred Qualifications:
Prior internship or coursework in water/wastewater, water resources, or related sectors.
Why Arcadis?
We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together.
You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you.
Together, we can create a lasting legacy.
Join Arcadis. Create a Legacy.
Our Commitment to Equality, Diversity, Inclusion & Belonging
We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law.
Arcadis offers benefits for part-time, as needed positions. These benefits include EAP, 401K, and optional well being benefits. The salary range for this position is $22.20 - $33.30 per hour.
#LI-TB1
#EarlyCareersANA
#Resilience-ANA
#WATER-ANA
#LI-HYBRID
#SWE #WEPAN #AWIS #INWES #BWEC #NSBE #SHPE #AISES #oSTEM #SAME #SASE
Auto-ApplyAerospace Engineering Intern
Engineering internship job in Suffield, CT
About LiquidPiston LiquidPiston, Inc. (LPI) is an advanced technology company developing compact, high-performance rotary engines based on a new thermodynamic cycle. Our propulsion systems are enabling new capabilities in defense, aerospace, and commercial applications. We are now expanding our hybrid-electric propulsion efforts to fixed-wing VTOL/UAS platforms and seeking top talent to join our team.
Position Overview
We're looking for a driven and hands-on aerospace engineering intern to join our team in developing and prototyping fixed-wing VTOL and UAS aircraft powered by LiquidPiston's hybrid rotary engine. In this role, you'll collaborate with multidisciplinary engineers to turn early-stage concepts into functional, flight-ready hardware. If you're passionate about cutting-edge aviation, thrive in fast-paced environments, and want to work on systems that actually fly, this is a unique opportunity to make an impact.
You're someone who loves building real things-whether it's designing, fabricating, or testing hardware, you're not afraid to get your hands dirty. You bring a strong analytical mindset, think from first principles, and learn best by doing. You take initiative, communicate clearly, and work well both independently and as part of a close-knit team.
You're currently pursuing a degree in aerospace engineering, mechanical engineering, or a related field, and you have experience with CAD and simulation tools like SolidWorks, CATIA, or ANSYS. Bonus points if you've worked on personal or academic projects involving prototyping, flight systems, or advanced mechanical design.
Key Responsibilities
* Assist in the design and development of subsystems for fixed-wing VTOL aircraft incorporating LiquidPiston's hybrid engine technology
* Collaborate with design, analysis, testing, and manufacturing teams to support integration and prototyping
* Participate in hands-on assembly, testing, and troubleshooting of mechanical and structural components
* Contribute to documentation and delivery of monthly technical reports to Department of Defense (DoD) partners
* Support technical presentations and maintain organized engineering documentation
Preferred Skills and Experience
* Finite Element Analysis (FEA) focused on composite aircraft structures
* Rapid prototyping with additive manufacturing and composite materials (carbon/glass fiber, epoxy)
* Experience with autonomous or R/C aircraft systems and electromechanical integration
* Strong documentation and presentation skills using Microsoft Word, Excel, and PowerPoint
* Familiarity with aerospace design constraints and lightweight structural optimization
Compensation:
* Approximately $3000-3850/month depending on the year in school.
Our Culture
At LiquidPiston, we challenge convention and solve hard problems. We move fast, think boldly, and iterate quickly. Our team thrives on collaboration, creativity, and resilience. We take calculated risks and believe that every setback is a steppingstone toward breakthrough innovation.
Equal Opportunity Employer
LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, or veteran status, and will not be discriminated against on the basis of disability.
All offers of employment at LiquidPiston are contingent upon the successful completion of a pre-employment background check, drug screening and credit check.
Aerospace Engineering Intern
Engineering internship job in Suffield, CT
LiquidPiston, Inc. (LPI) is an advanced technology company developing compact, high-performance rotary engines based on a new thermodynamic cycle. Our propulsion systems are enabling new capabilities in defense, aerospace, and commercial applications. We are now expanding our hybrid-electric propulsion efforts to fixed-wing VTOL/UAS platforms and seeking top talent to join our team.
Position Overview
We're looking for a driven and hands-on aerospace engineering intern to join our team in developing and prototyping fixed-wing VTOL and UAS aircraft powered by LiquidPiston's hybrid rotary engine. In this role, you'll collaborate with multidisciplinary engineers to turn early-stage concepts into functional, flight-ready hardware. If you're passionate about cutting-edge aviation, thrive in fast-paced environments, and want to work on systems that actually fly, this is a unique opportunity to make an impact.
You're someone who loves building real things-whether it's designing, fabricating, or testing hardware, you're not afraid to get your hands dirty. You bring a strong analytical mindset, think from first principles, and learn best by doing. You take initiative, communicate clearly, and work well both independently and as part of a close-knit team.
You're currently pursuing a degree in aerospace engineering, mechanical engineering, or a related field, and you have experience with CAD and simulation tools like SolidWorks, CATIA, or ANSYS. Bonus points if you've worked on personal or academic projects involving prototyping, flight systems, or advanced mechanical design.
Key Responsibilities
Assist in the design and development of subsystems for fixed-wing VTOL aircraft incorporating LiquidPiston's hybrid engine technology
Collaborate with design, analysis, testing, and manufacturing teams to support integration and prototyping
Participate in hands-on assembly, testing, and troubleshooting of mechanical and structural components
Contribute to documentation and delivery of monthly technical reports to Department of Defense (DoD) partners
Support technical presentations and maintain organized engineering documentation
Preferred Skills and Experience
Finite Element Analysis (FEA) focused on composite aircraft structures
Rapid prototyping with additive manufacturing and composite materials (carbon/glass fiber, epoxy)
Experience with autonomous or R/C aircraft systems and electromechanical integration
Strong documentation and presentation skills using Microsoft Word, Excel, and PowerPoint
Familiarity with aerospace design constraints and lightweight structural optimization
Compensation:
Approximately $3000-3850/month depending on the year in school.
Our Culture
At LiquidPiston, we challenge convention and solve hard problems. We move fast, think boldly, and iterate quickly. Our team thrives on collaboration, creativity, and resilience. We take calculated risks and believe that every setback is a steppingstone toward breakthrough innovation.
Equal Opportunity Employer
LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, or veteran status, and will not be discriminated against on the basis of disability.
All offers of employment at LiquidPiston are contingent upon the successful completion of a pre-employment background check, drug screening and credit check.
Powered by JazzHR
Yg8X4ZCiDk