Fabricator jobs in Aloha, OR

Gaylord Industries; a division of ITW is seeking a seasoned Sheet Metal Fabricator to add to their team in Tualatin, OR. Schedule: Monday - Thursday 5:00am - 3:30pm *Overtime on Fridays* Skills/Ability: * Skills to perform high quality Tig welding, grinding and finishing skills. This will include: fillet welding with uniform width and depth, and grinding and striping no wider than 3/8" with all burn marks blended out and no marks showing. * Skills to fuse weld a 90 degree joint, keeping weld surface flat, width even, with exterior edge sharp and no rollover. * Working knowledge of the following tools: drill motors, cutoff saws, Grinders, drill press, Tapping tools, belt sanders and various hand tools. * Proficiently read and use a tape measure. * Read and understand English in order to read/interpret prints, diagrams and drawings. * Proficient math skills. * Must be a team player, including good interpersonal skills Experience: * 1+ years Tig welding experience * 1+ years grinding/polishing experience Essential Functions/Responsibilities: * Tig fillet weld and finish stainless steel equipment and components with uniform width and depth. * Ensure high quality standards are achieved and maintained. * Analyzes plans, drawings, work samples, specifications, and work orders to determine work requirements and sequence of welding assignments. * Follow all safety and housekeeping rules. * Actively participate in Safety Program * Cross train into other areas and job functions as needed. * Willing to assist in other areas as needed. * Welding is 20% of the assembly process. * Installation of screws/nuts/bolts/rivets/silicone and more. Education: * High School Diploma or GED. * Minimum age requirement is 18 years. * Successful completion of an internal welding demonstration test Physical Requirements: * The ability to lift, carry, push, or pull objects of 75 lbs or more. * The ability to endure prolonged physical activity to work in demanding environments. * The ability to bend, squat, reach, and turn in various directions. * The ability to manipulate objects with precision and speed. * Vision, hearing, and other sensory abilities are needed for specific tasks. * The ability to safely climb and work from ladders, work on scaffolding, or perform other tasks at elevated heights. Compensation Information: Pay: $22.00 - $26.00 hourly DOE ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

OPTI STAFFING IS HIRING! Laminate / Mica Countertop Fabricator Pay: $18-$20/hr DOE Schedule: Flexible, Part-Time (Per Diem) - 2-3 days/week, 9:00 AM - 3:00 PM ( We'll work with the right person. Only available Mondays and Fridays? That's okay too ) Who We Are: We're a small, flexible, and experienced team looking for a motivated individual to join us in a hands-on role. We value attitude, willingness to learn, and craftsmanship over everything. Think of this as less of a job and more of a craft - we take pride in what we do. What You'll Do: Fabricate high-quality laminate/mica components Use tools such as routers and table saws safely and effectively Work closely with team members on flexible schedules Help support shop operations with a can-do mindset What's In It for You: Flexible schedule - great for semi-retired tradespeople or someone looking for part-time work Relaxed, no-drama environment Opportunity to grow with the right attitude Immediate or future start - we'll wait for the right fit What You Need to Have: Knowledge of laminate (mica) materials and fabrication techniques Ability to safely operate woodworking tools like routers and table saws A go-getter mindset - someone who wants to work, learn, and contribute The Musts: Reliability and a strong work ethic Comfortable in a hands-on, physical role Have a flexible schedule and availability to work at least 2 days a week Preferred: Retired or semi-retired with relevant skills? Perfect! Experience in fabrication or similar trade Willingness to jump in and get things done Next Steps: Please respond with an updated resume! Call Kristian at 360.553.7223 OR Grant Filbert at 360.553.7222 to schedule an interview. You can also drop by for a walk-in interview at: 703 Broadway St Suite 690, Vancouver, WA 98660

3575 25th St SE Salem Oregon 97302-1123 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. Valmont is currently seeking a highly motivated and talented individual for a Fabricator and Machine Operator position at our Salem, Oregon site. We are looking for a highly driven individual that will process material in accordance with shop drawings using fabrication machines and tools. Essential Functions: This position reports into (Supervisor title) and has (#) direct reports and (#) indirect reports This role requires up to (%) travel (internationally/domestically), including overnight stays Flexible schedule however must be able to work in the office xxx days per week Set-up and run a variety of drill presses Set-up and run hydraulic iron workers, sheer, punch, and cope Use several different layout tools Set up and run hydraulic Press Brake Set-up and run CNC Turret punch Maintain material traceability Set-up and run VMC Set up and operate a Hydraulic Press Brake Perform general housekeeping Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities): High School Diploma or GED equivalent Minimum of 1 year experience working in a fast-paced manufacturing environment Ability to lift, push or pull a maximum of 50 pounds Must be able to read a tape measure to within 1/32” Must be able to read shop drawings Must be self-motivated and a fast learner Demonstrated strengths in interpersonal skills, including the ability to adapt and professionally communicate with a variety of people Highly Qualified Candidates Will Also Possess These Qualifications: Industrial trade school in industrial machining One Year of previous qualified fabrication experience in a professional, manufacturing environment with press brake experience Must be a person of passion and integrity who has the drive to excel and deliver exceptional results Working Environment and Physical Efforts: Educational Background Able to clearly communicate written and verbal instructions Proficiency in addition, subtraction, multiplication, division, fractions, fraction to decimal conversions, and the use of micrometers, protractors, and tape measures Ability to read specifications, bill of material, and simple and complex blueprints Job Training Skill Development Must be able to satisfactorily perform all functions of this position within 90 days of starting this position. Must pass Valmont forklift certification for all forklifts used in the position. Decision Making The decisions the person in this position makes affects inventory accuracy and availability of material for the production and shipping areas. The incumbent is responsible for prioritizing the workload to avoid lost time to all departments. Utilizes product mix in location assuring proper rotation of stored materials. Reviews space allocations and material flow to maximize utilization of space available. Able to apply creativity to solve the problems encountered within the scope of their activity. Examples would be to receive material, issue material, or resolve inventory discrepancies and implement the appropriate action to correct them. Effort: Physical Effort Operates equipment 50% of the time. Lifts, pushes, and carries material Mental and Visual Effort Coordination of eyes, hands and feet required to perform in an efficient and safe manner. Requires constant awareness. Must be able to accurately read and write part numbers and quantities on material, logs, move tags, and computer documents. Inventory logs and the computerized inventory system must be prepared and interpreted correctly. Due to the visual requirements of this position, employee must demonstrate acceptable vision by passing the eye test for an Oregon driver's license. If employee does not have a driver's license, the determination of acceptable vision will be made on an individual basis. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. 2025-10-20

Legacy Talent Search is currently seeking candidates for a Fabricator role in Portland, OR. Our client is a well-established industry leader known for precision craftsmanship, innovation, and a commitment to delivering the highest quality metal products. With a strong focus on continuous improvement and teamwork, they pride themselves on maintaining excellence at every stage of their fabrication process. Schedule: Monday - Friday | 6:00 AM - 2:30 PM Key Responsibilities: · Fabricate, assemble, and modify light-gauge metal components according to blueprints, shop drawings, and technical specifications. · Operate fabrication equipment including shears, brakes, presses, plasma cutters, and other hand/power tools. · Perform layout, cutting, forming, and fitting of sheet metal and structural parts. · Read and interpret detailed technical drawings to ensure accuracy and quality in all fabricated parts. · Inspect finished workpieces to ensure conformance with specifications and quality standards. · Maintain a clean and organized work area, following all safety protocols and company procedures. · Collaborate with other team members, welders, and assemblers to meet production deadlines. · Report any equipment malfunctions or material issues promptly to supervisors. Qualifications: · Minimum 3 years of fabrication experience-light gauge experience required. · Proficiency with measuring tools, hand tools, and fabrication machinery. · Strong understanding of fabrication techniques, tolerances, and materials. · Ability to read and interpret technical drawings and shop prints. · Detail-oriented with a commitment to safety and precision. · Excellent teamwork, communication, and time management skills. · Ability to lift up to 50+ lbs and stand for extended periods. What We Offer: · Competitive hourly wage commensurate with experience. · Comprehensive benefits package, including health insurance and paid time off. · Stable, full-time day shift schedule (no weekends). · Opportunities for professional growth and skill development. · A supportive, safety-focused, and team-oriented work environment. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life-one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community-how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

Job Description Purpose of the Job: A Fabricator is responsible for studying detailed schematics of complex machinery, using both hand and power tools proficiently to fabricate and assemble components. Technical knowledge acquisition is essential for troubleshooting, repairing, and upgrading industrial equipment, as well as conducting OSHA-inspections and documenting findings. Welding expertise, including MIG, TIG, and ARC methods, is utilized for metal joining. Verifying dimensions and adhering to product specifications, maintaining production schedules, and conducting rigorous quality checks to uphold safety standards are integral to the role. Additionally, responsibilities include stress testing products, reporting malfunctions, and collaborating effectively within a team environment. Operating fabrication equipment for metal shaping, machining responsibilities, and ensuring compliance with company policies, especially in safety and customer service, round out the responsibilities for this multifaceted position. Responsibilities: Read detailed schematics for complex machines Use hand tools and power tools to trim, cut and fit components into the final product. Gain technical knowledge and skills. Troubleshooting, repairing, inspecting, and upgrading industrial equipment. Perform OSHA inspections and generate inspection reports and repair orders. Communicate with the Service Manager during the day so that work can be scheduled and completed on a daily basis. Weld or join metal components together using various techniques and methods including MIG, TIG, and ARC welding. Verifying dimensions and product specifications. Maintaining a production schedule. Conduct quality checks on finished products to ensure they meet safety and quality standards. Troubleshooting and stress-testing products to minimize problems or recalls. Reporting and detailing product malfunctions. Maintain the ability to work with others in a team environment as required. Ensuring that all parts are properly fitted, aligned and screwed in. Cut, bend, and shape metal components using a range of fabrication equipment such as saws, lathes, drill presses, and grinders. Find faulty components in defective products to fix them Load and unload trucks Machining responsibilities Responsible for moving equipment, including operating a forklift Adhere to all company policies including safety, appearance, and customer service. Other duties as assigned Qualifications: Must be a Certified Welder High School Diploma or GED Experience with basic hand tools Exceptional customer service skills Expertise in welding techniques and procedures including MIG, TIG, and ARC Must be willing to work off the ground at various heights Must have basic computer skills Must be able to communicate well with others and work independently or as a team Proficiency in operating heavy machinery. Good dexterity. Attention to detail. Good organizational skills. Specialized certification preferred.

Motion is widely recognized across the US for the variety and quality of our hose, belting, custom fabrications, on-site belting services, and consumer products. Specializing in the value-added fabrication of belt, hose, and cut & molded products, Motion products are used across a wide array of industries and applications. We strive to provide a workplace built on teamwork, comprised of team players who take pride in a job well done while consistently achieving results that exceed our customer's expectations. JOB DUTIES: Fabricator roles consist of multiple functions/disciplines necessary to fabricate lightweight and heavy duty industrial and agricultural belts and hoses, including but not limited to: Baler production Belt sample cutting Cleating fabrication Custom fabrication Cut rubber parts fabrication Extruder operations Forklift operations Lacing fabrication Material handling Press operations Sidewall fabrication Slitter operations Splicing fabrication EDUCATION & EXPERIENCE: High school diploma/equivalent Ability to read and understand work orders with instruction Ability to lift up to 35 lbs. frequently and without assistance Ability to lift up to 70 lbs. occasionally Ability to add, subtract, multiply, and divide in main units of measure, using whole numbers, common fraction, and decimals KNOWLEDGE, SKILLS, ABILITIES: Ability to set up and operate mechanical equipment as well as use power tools and hand tools safely Ability to use a tape measure and calipers Sufficient knowledge or experience to perform industrial math and measuring PHYSICAL DEMANDS: Job entails long periods of standing in the operations area, which is often cold in the winter and hot in the summer months. Job requires safety footwear and protective eyewear. COMPANY INFORMATION: Motion offers an excellent benefits package which includes options for healthcare coverage, 401(k), tuition, reimbursement, vacation, sick, and holiday pay. Not the right fit? Let us know you're interested in a future opportunity by joining our Talent Community on jobs.genpt.com or create an account to set up email alerts as new job postings become available that meet your interest! GPC conducts its business without regard to sex, race, creed, color, religion, marital status, national origin, citizenship status, age, pregnancy, sexual orientation, gender identity or expression, genetic information, disability, military status, status as a veteran, or any other protected characteristic. GPC's policy is to recruit, hire, train, promote, assign, transfer and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons.

Figure Plant is the bridge between great ideas and reality. For almost thirty years we have partnered with some of the world's top brands, creative agencies, artists, and designers to bring big ideas to life. We thrive on taking our client's toughest creative challenges and transforming them into beautiful solutions that ignite the passion in audiences and users. And we bring emotion, ingenuity, and integrity to everything we build. Our mission is to give life to innovative design concepts through mad respect for creative vision coupled with utmost accountability to timeline and budget in order to make great ideas happen. Core Values Collaborate with Curiosity Solve with Creativity Support Our Community Job Mission To fabricate and install product as dictated in our Technical Design drawings to the quality standards, timing, and labor budget communicated by the Production team The Fabricator, Generalist reports to the Shop Manager and collaborates with the Shop Fores and Fabrication team. Intended Outcomes Timely, efficient, and high-quality production in our multimedia shop and at jobsites Roles & Responsibilities Complete project-related tasks in a variety of media Understand and follow all workplace safety expectations Execute install and strike activities with public-facing comportment Keep an accurate and detailed timecard Work effectively and collaboratively with other Fabrication team members Key Competencies Experience with basic woodworking, assembly, and installation processes Ability to read and interpret detailed shop drawings Deadline-driven work ethic while achieving top quality standards Great to have Experience with spray booth, CNC tool pathing for sheet goods, metal, scenic, sculptural, and other artistic processes.

Gaylord Industries; a division of ITW is seeking a seasoned Sheet Metal Fabricator to add to their team in Tualatin, OR. Schedule: Monday - Thursday 5:00am - 3:30pm ***Overtime on Fridays***Skills/Ability: Skills to perform high quality Tig welding, grinding and finishing skills. This will include: fillet welding with uniform width and depth, and grinding and striping no wider than 3/8” with all burn marks blended out and no marks showing. Skills to fuse weld a 90 degree joint, keeping weld surface flat, width even, with exterior edge sharp and no rollover. Working knowledge of the following tools: drill motors, cutoff saws, Grinders, drill press, Tapping tools, belt sanders and various hand tools. Proficiently read and use a tape measure. Read and understand English in order to read/interpret prints, diagrams and drawings. Proficient math skills. Must be a team player, including good interpersonal skills Experience: 1+ years Tig welding experience 1+ years grinding/polishing experience Essential Functions/Responsibilities: Tig fillet weld and finish stainless steel equipment and components with uniform width and depth. Ensure high quality standards are achieved and maintained. Analyzes plans, drawings, work samples, specifications, and work orders to determine work requirements and sequence of welding assignments. Follow all safety and housekeeping rules. Actively participate in Safety Program Cross train into other areas and job functions as needed. Willing to assist in other areas as needed. Welding is 20% of the assembly process. Installation of screws/nuts/bolts/rivets/silicone and more. Education: High School Diploma or GED. Minimum age requirement is 18 years. Successful completion of an internal welding demonstration test Physical Requirements: The ability to lift, carry, push, or pull objects of 75 lbs or more. The ability to endure prolonged physical activity to work in demanding environments. The ability to bend, squat, reach, and turn in various directions. The ability to manipulate objects with precision and speed. Vision, hearing, and other sensory abilities are needed for specific tasks. The ability to safely climb and work from ladders, work on scaffolding, or perform other tasks at elevated heights. Compensation Information: Pay: $22.00 - $26.00 hourly DOE ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description MISSION: To remove surface and subsurface defects from castings in order to meet customer specifications. PRINCIPAL ACCOUNTABILITIES: 1- Grinding. Objective: to review inspection paperwork, and grind and blend defect areas on castings; to blend welds to blueprint tolerances. Typical Activities: * Reviews x-ray/inspection paperwork, sketches and blueprints to determine grinding requirements. * Removes surface and blind cavity defects from castings using rotary files, burrs, abrasives or belts to prepare castings for repair. * Blends and reworks repaired areas to specified tolerances; may use hand-held sandblaster. 2- Inspection. Objective: to assure compliance with customer specifications. Typical Activities: * Verifies dimensional compliance using micrometers, calipers, ultrasonic testing and similar types of dimensional inspection devices. * Performs fluorescent penetrant inspection tests on parts to verify removal of surface and subsurface defects; applies penetrant, lets dry, washes off and inspects for defects. * Completes logs and records. * Provides work direction and training to junior-level grinders as assigned. 3- Safety. Objective: to take responsibility for and demonstrate safe work practices. Typical Activities: * Adheres to plant and department safety rules. * Safely operates all equipment and tools. * Identifies and reports safety problems. * May be required to handle hazardous waste. 4- Performs other tasks as directed. TRAINING: * Training is provided on the job. * Rework Analyst, Visual Dimensional and Penetrant Inspection Courses preferred. * May be required to complete hazardous waste management training. ENTRY QUALIFICATIONS: * Grinding skills and working knowledge of grinding tools, equipment, and materials. * OR * An equivalent combination of classroom training and work experience. * Basic ability to follow instructions, read, write, and perform arithmetic calculations. * Ability to use and read dimensional tools including calipers, gauges and micrometers. * Ability to read, interpret, and follow specifications on Tech Cards and Process Control Procedures. * Ability to lift and/or maneuver objects weighing thirty to fifty pounds and occasionally up to eighty pounds. * Ability to work in difficult working conditions which may include exposure to noise, dust, chemicals, temperature extremes, awkward physical positions and other elements for extended periods of time. INDIVIDUALS MAY HAVE CONTACT WITH OR BE REQUIRED TO HANDLE HAZARDOUS WASTE. NOTE: for job positions that require respiratory protection (more than a filtering face piece - dust mask): In compliance with the Oregon Occupational Safety and Health Division Personal Protective Equipment standard for Respiratory Protection, OAR 437, Div. 2/I 1910.134 and Oregon Health Division Rules for the Control of Radiation, OAR 333. Div. 120 (333-120-300 through 330), certain tasks within this job position require/may require the use of a NIOSH-approved respirator. An individual will not be assigned to these tasks if the person is not able to work under these conditions. Respirator selection will be based on the work performed, exposure information, duration of use and any other relevant factors. If a tight-fitting respirator is required, facial hair, temple pieces on glasses or other items that interferes with the face-to-face piece seal of the respirator are not permitted. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.

MISSION: To remove surface and subsurface defects from castings in order to meet customer specifications. PRINCIPAL ACCOUNTABILITIES: 1- Grinding. Objective: to review inspection paperwork, and grind and blend defect areas on castings; to blend welds to blueprint tolerances. Typical Activities: Reviews x-ray/inspection paperwork, sketches and blueprints to determine grinding requirements. Removes surface and blind cavity defects from castings using rotary files, burrs, abrasives or belts to prepare castings for repair. Blends and reworks repaired areas to specified tolerances; may use hand-held sandblaster. 2- Inspection. Objective: to assure compliance with customer specifications. Typical Activities: Verifies dimensional compliance using micrometers, calipers, ultrasonic testing and similar types of dimensional inspection devices. Performs fluorescent penetrant inspection tests on parts to verify removal of surface and subsurface defects; applies penetrant, lets dry, washes off and inspects for defects. Completes logs and records. Provides work direction and training to junior-level grinders as assigned. 3- Safety. Objective: to take responsibility for and demonstrate safe work practices. Typical Activities: Adheres to plant and department safety rules. Safely operates all equipment and tools. Identifies and reports safety problems. May be required to handle hazardous waste. 4- Performs other tasks as directed. TRAINING: Training is provided on the job. Rework Analyst, Visual Dimensional and Penetrant Inspection Courses preferred. May be required to complete hazardous waste management training. ENTRY QUALIFICATIONS: Grinding skills and working knowledge of grinding tools, equipment, and materials. OR An equivalent combination of classroom training and work experience. Basic ability to follow instructions, read, write, and perform arithmetic calculations. Ability to use and read dimensional tools including calipers, gauges and micrometers. Ability to read, interpret, and follow specifications on Tech Cards and Process Control Procedures. Ability to lift and/or maneuver objects weighing thirty to fifty pounds and occasionally up to eighty pounds. Ability to work in difficult working conditions which may include exposure to noise, dust, chemicals, temperature extremes, awkward physical positions and other elements for extended periods of time. INDIVIDUALS MAY HAVE CONTACT WITH OR BE REQUIRED TO HANDLE HAZARDOUS WASTE. NOTE: for job positions that require respiratory protection (more than a filtering face piece - dust mask): In compliance with the Oregon Occupational Safety and Health Division Personal Protective Equipment standard for Respiratory Protection, OAR 437, Div. 2/I 1910.134 and Oregon Health Division Rules for the Control of Radiation, OAR 333. Div. 120 (333-120-300 through 330), certain tasks within this job position require/may require the use of a NIOSH-approved respirator. An individual will not be assigned to these tasks if the person is not able to work under these conditions. Respirator selection will be based on the work performed, exposure information, duration of use and any other relevant factors. If a tight-fitting respirator is required, facial hair, temple pieces on glasses or other items that interferes with the face-to-face piece seal of the respirator are not permitted.

Madden Industrial Craftsmen is seeking a Welder/Fabricator for a long-term role with a shop located in SE Portland. The person in this position will primarily weld and fabricate industrial machinery framing using MIG welding processes. PAY: $25-$30/hr Welder/Fabricator Responsibilities: * Weld with fluxcore and hardwire MIG on carbon steel and mild steel. * Some TIG welding on stainless steel. * Set-up and keep alignment of equipment. * Read blueprints and fabricate utilizing relevant shop equipment. * Assist mechanics with assembly as needed. Welder/Fabricator Qualifications: * 5+ years of MIG welding experience. * 5+ years of experience fabricating from prints. * Must be proficient in welding symbols. * Willingness to assist mechanics with assembly processes as required. * Ability to work day shift (MON-FRI, 7AM-3:30PM) * Ability to pass a pre-employment background check and drug screen (THC friendly). Welder/Fabricator Benefits: * $25-$30/hr * Medical * Paid Sick Leave * Paid Holidays * 401(k) with match

**Pay Rate:** $25-$28 per hour We are seeking an experienced **Welder** to join our team. In this role, you will fabricate and weld brackets for structural steel and cage assemblies used to support large highway signs-similar to those seen on freeway overpasses. You will primarily use **GMAW** and **FCAW** welding processes with .045 wire on steel up to 1 inch thick. This is a **day shift position** , Monday through Friday, from **6:00 AM to 2:30 PM** . **Key Responsibilities** + Weld brackets for structural steel and cage assemblies for highway signage. + Perform **GMAW** and **FCAW** welding using .045 wire on steel up to 1" thick. + Read and interpret blueprints to ensure precision and accuracy. + Inspect welds to maintain high-quality standards. + Operate hand tools and assist with general labor tasks as needed. **Required Skills & Experience** + Proficiency in **GMAW** and **FCAW** welding techniques. + Minimum **2 years of MIG welding experience** . + Ability to read and interpret blueprints. + Skilled in using hand tools for fabrication and inspection. **Preferred Qualifications** + Experience with flux core welding. + Familiarity with general labor and inspection processes. **Why Join Us?** Become part of a **family-owned, medium-sized company** with a strong culture and excellent benefits. We offer **training opportunities** , room for **career advancement** , and **pay increases** for top performers. **Work Environment** You'll work in a **clean machine shop** inside an enclosed (but uninsulated) building, which may be cooler in winter and warmer in summer. Our team values a **friendly, laid-back atmosphere** while maintaining high standards of craftsmanship. **Job Type & Location** This is a Contract to Hire position based out of PORTLAND, OR. **Pay and Benefits** The pay range for this position is $25.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in PORTLAND,OR. **Application Deadline** This position is anticipated to close on Jan 5, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Responsible for various types of weld preparation, GTAW welding and weld finishing operations to manufacture product to customer drawings, specifications, or other forms of instruction. Self-motivated people who want to make a difference should apply. Thin metal welding (less than . 060”) is a plus

Responsible for various types of weld preparation, GTAW welding and weld finishing operations to manufacture product to customer drawings, specifications, or other forms of instruction. Self-motivated people who want to make a difference should apply. Thin metal welding (less than . 060”) is a plus

Job Description NEW SHOP in PNW!! WE ARE HIRING Fabricators & Welders!! About us: Oregon Mining & Ag Fabrication is a new shop in the Pacific Northwest entering into the fabrication industry. Specializing in design-build projects, build-from-print manufacturing, and expert repair work, we're positioning ourselves to become the region's premier fabrication shop. Our ambitious team is driven by a commitment to hard work, uncompromising quality, and ethical business practices. As we embark on a trajectory of strong growth, we're offering exceptional opportunities for skilled professionals to advance their careers and make a significant impact in our industry. The Opportunity: Fabricator & Welder We're seeking seasoned fabricators and welders to join our team and contribute to our vision of excellence. The ideal candidate will bring a wealth of experience, a passion for craftsmanship, and a drive to excel in a dynamic work environment. *Experience with exotic alloy fabrication is a plus, as is the ability to adapt to a diverse range of projects and challenges* What we're looking for: The successful candidate will possess a minimum of at least 3-5 years of experience in the metal fabrication industry. You should be adept at reading and working from prints, capable of working autonomously, and committed to maintaining the highest standards of quality in your work. Your technical skills should include proficiency in all-position welding, including multi-pass heavy welding. You should be competent in fitting, understanding the correct order of operations, and comfortable with using torches and air arcs. We value creativity in fit-ups and the ability to tackle unorthodox work. About you: We're looking for individuals who take pride in their work, demonstrate a strong work ethic, and contribute positively to our team atmosphere. You should be open to constructive feedback and committed to punctuality and regular attendance. A dedication to safety and proper equipment care is essential. Job Details: Jobsite is located at: 10590 Donald Rd., NE, Donald, OR 97020 (Bldg.#2) Working Hours: Mondays-Fridays from 7:00am-3:00PM Compensation is dependent on experience Qualifications: Must have reliable transportation Submit to background /drug screenings and pre-employment screenings Benefits: Medical/Vision/Dental (monthly premiums paid by employer after waiting period) Vacation & OSL Generous 401k employer match Joining Oregon Mining & Ag Fabrication means becoming part of a forward-thinking team at the ground floor of an exciting venture. If you're excited by the prospect of shaping the future of fabrication in the Pacific Northwest, we invite you to apply. You'll have the opportunity to work on a wide variety of projects, each presenting unique challenges and learning opportunities. As we grow, so too will the potential for your career advancement. We are an equal opportunity employer. We look forward to hearing from you and potentially welcoming you to our team. Job Type: Full-time Shift: Day shift Work Location: In person

Hello prospective employee! We appreciate you taking the time to learn about Farwest and this available position. About Farwest: Farwest Steel Corporation has been the preeminent metal solutions choice within the greater Western United States since 1956. Farwest's products and services offer customers the ability to consolidate many suppliers into one effective solution. We have over 650 employees located in 7 Western States. As a company, Farwest strives to offer our employees a safe, innovative, creative, fun, diverse and team-based atmosphere that supports our vision: to be the preeminent metal solutions provider in the Western United States. Our goal is to create a performance-based culture staffed with highly motivated and satisfied employees. Stable full-time work expected through 2025 and 2026 calendar years and beyond! Join a growing, dynamic company with operations across the western US! Learn more at **************************** Swing Shift (Typically 2:30pm to 11:00pm) WELD TEST WILL BE REQUIRED, BRING YOUR WELDING HOOD @ INTERVIEW Purpose of Position: To weld components by prescribed methods required or as called out on customer's blueprints and specifications. Meeting quality requirements set forth by AWS D1.1 or greater. Provide instruction for the development of welder trainees. Major Duties: 1. Review blue prints and job specifications with supervisor. Learn to set-up welder current, amperage, and gas flows to the prescribed settings for material being welded. 2. Develop skills required to set up parts that are tacked or fixtured for welding. 3. Weld components together meeting AWS D1.1 standards or greater. 4. Check dimensions and tolerances after welding and cooling. Use industries standard methods to straighten, ream, and debur as required. 5. Provide technical direction and support to welder trainees. 6. Participate in insuring a safe work environment through best practices including promoting of all company safety policies, OSHA guidelines, maintenance of a 5S work station. Qualifications: High School diploma or equivalent required. Must be reliable, on time and ready to work daily. Must be able to read and interpret blue prints and welding, engineering and material specifications. Must be proficient in MIG, FCAW and tack welding, and standard metal working tools. Must have solid math, dimensional and reading skills, and also be able to use a tape measure. **Minimum 2years experience. Pay Range: $20.60 - $31.30 DOE, plus $1.25 swing shift differential Bonus: Up to 60 cents an hour paid quarterly for branch safety practices Benefits include: Medical, Dental, Vision, LTD, FSA, HRA, HSA, EAP, company paid Life Insurance & STD, and 3.5% 401K Match We offer full benefits with options to suit everyone As a condition of employment, all applicants are required to pass a pre-employment drug screen and background check that must be completed, post offer of employment. Farwest participates in eVerify and we confirm each candidate's eligibility to legally work in the US. Farwest Steel is proud to be an Equal Opportunity Employer / Drug Free Workplace / Veterans Click "Apply Now" to submit your job application. Work Opportunity Tax Credit Farwest Steel Corporation & Affiliates participate in the Work Opportunity Tax Credit program. ADP Tax Credits administers this program on our behalf. It is vital that you follow the steps listed below in order for the tax credits to be processed. We appreciate your cooperation. Questionnaire Instructions Open ***************************************************** Note: To change the language on screen please select a language from the dropdown box Click on Continue to begin Please answer each question Eligible candidates will be asked to Click Finish and Electronically Sign to complete the interview. Ineligible candidates will be asked to click Continue to finish the interview. You will not be asked to electronically sign. *ADP will contact WOTC-eligible new hires via email or text to request proof of age or address documentation, when needed.

Job Details Division: Kirby Building Systems LLC Other Available Locations: N/A Basic Job Functions: Welding steel structural parts as specified per drawing or print. Operating grinder to prepare and finish welds. Operating magnetic drill. Full visual inspection of part ensuring all welds are in place and properly applied. Effectively communicating with upstream and downstream to address safety, quality and efficiency issues/concerns. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: WQ1 (2G) weld certification Legally authorized to work in the United States without the need for visa sponsorship Preferred Qualifications: Can read and understand weld symbols Can use an arc gouger Previous crane certification Previous experience in material handling Anout Us: Nucor Buildings Group (NBG), a proud Nucor product group, is one of North America's largest and most experienced manufacturers of metal building systems. With multiple locations throughout the United States, NBG is proud to design world-class building solutions tailored to meet the needs of any market including commercial, industrial, agricultural, and institutional. Our brands include American Buildings, CBC Steel Buildings, Kirby Building Systems, and Nucor Building Systems. NBG offers work/life balance and a variety of benefits and performance incentives. We take pride in connecting teammates to meaningful work and focus heavily on both personal and professional development. Whether your background is in engineering and design, information technology and software development, marketing, or sales, with Nucor Buildings Group you can go as far as your drive and ambition will take you. Why Nucor? When you join Nucor, America's largest steel manufacturer and recycler, you'll help create a variety of steel products that become so much more, for so many people. And you won't do it alone. Our supportive culture builds each other up, values family, relationships, and puts safety above anything else. With the freedom to take your ideas to the next level, there's no end to what you can achieve. This is your chance to build a lifelong career, give back to your community, make the world a better place - and BE PART OF SOMETHING BIGGER. Job Security - Benefits - Bonus Programs With performance-based compensation, profit sharing, and a no-layoff practice, we take care of our teammates who design, engineer, fabricate, and support the products that define our company. Join us in driving success and shaping the future of our division. Apply now and become an integral part of our team! Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

Job DescriptionSalary: FABRICATION SHOP WELDER Precision Industrial Manufacturing, Inc. is seeking a FT Fabrication Shop Welder for immediate hire. PIC Fabrication Shop has immediate openings for experienced Welder to join our team. Were looking for a hardworking individual who enjoy meeting challenges and surpassing customer expectations. The ideal candidate will have a background in MIG, TIG, STICK with FCAW and GMAW processes. REQUIREMENTS: Perform job tasks keeping safety first. Willing to be flexible with work hours, departments, and schedules. Must be reliable, trustworthy and a team player. Self-assess work and use good judgment to ensure that finished product meets quality requirements. Strong work ethic and strong attention to detail. Perform any other tasks assigned to support and improve the overall team operations Able to perform with minimal supervision. EDUCATION/EXPERIENCE DESIRED: Must be certified or able to pass 3G FCAW weld test to AWS D1.5 standards. Minimum of 3-6 years on the job experience in a structural shop as a Welder. Ability to interpret blueprints and weld symbols. Knowledgeable in crane operations and rigging of structural steel and operation. Familiar with craftsmanship criteria set forth in AWS D1.1 and D1.5-2010. RESPONSIBILITIES/DUTIES: Reads blueprint or job order for product specifications such as dimensions and tolerances, and tooling instructions such as fixtures, and determines sequence of operations. Operate safety equipment and use safe work habits. Plan sequence of operations, applying knowledge of, effects of heat, and allowances for weld shrinkage, machining, and thickness of metal. Lay out, position, align, and secure parts and assemblies prior to assembly/tacking and or welding using prescribed fixtures and proper work procedures. Recognize, set up, and operate hand and power tools common to the welding trade, such as MIG and TIG welding machines, Grinders ETC. Chip or grind off excess weld, slag, or spatter, using hand scrapers or portable grinders. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Examine work pieces for defects and measure work pieces to ensure conformance with specifications. Must be able to lift, pull, push and/or carry up to 50lbs Moves parts into position manually or by hoist or crane. Must have manual dexterity and visual acuity Must be able to meet the physical demands of the position such as: standing, walking, kneeling, bending, squatting, etc. Day Shift / Swing Shift positions. Extensive benefits package. Wages commensurate with experience. Pre-employment Drug Screen is required. Travel outside of Fabrication shop is required approximately 20-30% of time with pay incentive when this occurs. Job Type: Full-time Salary: $18.00 to $26.00 /hour Experience: Welding: 3 years For further details and/or to submit a resume please contact Kristin McGavran, Recruiter/HR Manager Phone:**************Email: ***************************** ** Safety ** ** Professionalism ** ** Experience**

3575 25th St SE Salem Oregon 97302-1123 **_Why Valmont_** **We're Here to Move the World Forward.** Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a _Fortune_ 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. _We are the modern workforce_ . Are you ready to move the world forward? Apply now. Valmont is currently seeking a highly motivated and talented individual for a Fabricator and Machine Operator position at our Salem, Oregon site. We are looking for a highly driven individual that will process material in accordance with shop drawings using fabrication machines and tools. **Essential Functions:** + This position reports into (Supervisor title) and has (#) direct reports and (#) indirect reports + This role requires up to (%) travel (internationally/domestically), including overnight stays + Flexible schedule however must be able to work in the office xxx days per week + Set-up and run a variety of drill presses + Set-up and run hydraulic iron workers, sheer, punch, and cope + Use several different layout tools + Set up and run hydraulic Press Brake + Set-up and run CNC Turret punch + Maintain material traceability + Set-up and run VMC + Set up and operate a Hydraulic Press Brake + Perform general housekeeping **Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities):** + High School Diploma or GED equivalent + Minimum of 1 year experience working in a fast-paced manufacturing environment + Ability to lift, push or pull a maximum of 50 pounds + Must be able to read a tape measure to within 1/32" + Must be able to read shop drawings + Must be self-motivated and a fast learner + Demonstrated strengths in interpersonal skills, including the ability to adapt and professionally communicate with a variety of people **Highly Qualified Candidates Will Also Possess These Qualifications:** + Industrial trade school in industrial machining + One Year of previous qualified fabrication experience in a professional, manufacturing environment with press brake experience + Must be a person of passion and integrity who has the drive to excel and deliver exceptional results **Working Environment and Physical Efforts:** _Educational Background_ + Able to clearly communicate written and verbal instructions + Proficiency in addition, subtraction, multiplication, division, fractions, fraction to decimal conversions, and the use of micrometers, protractors, and tape measures + Ability to read specifications, bill of material, and simple and complex blueprints _Job Training Skill Development_ Must be able to satisfactorily perform all functions of this position within 90 days of starting this position. Must pass Valmont forklift certification for all forklifts used in the position. _Decision Making_ The decisions the person in this position makes affects inventory accuracy and availability of material for the production and shipping areas. The incumbent is responsible for prioritizing the workload to avoid lost time to all departments. Utilizes product mix in location assuring proper rotation of stored materials. Reviews space allocations and material flow to maximize utilization of space available. Able to apply creativity to solve the problems encountered within the scope of their activity. Examples would be to receive material, issue material, or resolve inventory discrepancies and implement the appropriate action to correct them. **Effort:** _Physical Effort_ Operates equipment 50% of the time. Lifts, pushes, and carries material _Mental and Visual Effort_ Coordination of eyes, hands and feet required to perform in an efficient and safe manner. Requires constant awareness. Must be able to accurately read and write part numbers and quantities on material, logs, move tags, and computer documents. Inventory logs and the computerized inventory system must be prepared and interpreted correctly. Due to the visual requirements of this position, employee must demonstrate acceptable vision by passing the eye test for an Oregon driver's license. If employee does not have a driver's license, the determination of acceptable vision will be made on an individual basis. **Benefits** Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: + Healthcare (medical, prescription drugs, dental and vision) + 401k retirement plan with company match + Paid time off + Employer paid life insurance + Employer paid short-term and long-term disability including maternity leave + Work Life Support + Tuition Reimbursement up to $5,250 per year + Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. 2025-10-20 Valmont is here to modernize vital infrastructure and increase agricultural productivity, sustainably and reliably. We galvanize steel to last a century with minimal environmental impact. We modernize irrigation to feed a growing population by utilizing the latest technology. We harden the electrical grid to enable the delivery of reliable power to millions of homes around the world. And we help make communities everywhere safer, cleaner and more connected through our smart infrastructure technology. Valmont serves two primary markets - agriculture and infrastructure - and seven diverse product lines: Utility, Lighting and Transportation, Telecom, Solar, Coatings, Irrigation and Ag Tech. We manufacture products in 85 facilities spread across six continents, and we do business in 100 different countries. That's what Valmont does. We conserve resources and improve life, finding ways to make innovation and technology beneficial in the real world. + That's the value we add.