Fabricator jobs in Camden, NJ - 45 jobs

ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required. Ensure that all Hanwha Philly Shipyard safety procedures, rules and regulations are followed and met Knowledge and proficiency of heavy shipyard construction welding in all positions using approved WPS (Welding Procedure Specification) determined by Hanwha Philly Shipyard and classification society Welding process includes: FCAW - Flux Core Arc Welding SMAC - Shielded Metal Arc Welding SAW - Submerged Arc Welding EGW - Electro Gas Welding Automated Welding Processes Stainless Steel Fillet Welding Padding and preparing weld joints per WPS Carbon Arc Gouging Note: Not inclusive, shall be determined by vessel specification and classification rules Knowledge, understanding and demonstration of interpreting approved WPS set forth at Hanwha Philly Shipyard Knowledge and ability on how to use all tools related to welding, including basic trouble shooting and maintaining welding equipment to assure a safe and efficient operation Welder must proficiently demonstrate welding ability through performance, and testing as determined by vessel project and classification Welder must be able to work in a team environment Welder shall perform internal quality checks of own work performance to assure quality standards are achieved daily Welder shall maintain their individual NDT rejection set forth by Hanwha Philly Shipyard and classification society Perform other related duties as required and assigned COMPETENCIES Work Independently according to valid instructions and Hanwha Philly Shipyard rules and standards Flexible cooperation with team members Must be able to work in different environments and areas (e.g. indoors, outdoors, in confined spaces, on scissor lifts and aerial lifts, and in inclement weather) Ability to orient, train and instruct lesser skilled welders SUPERVISOR RESPONSIBILTY This position has no supervisory responsibilities. WORK ENVIRONMENT Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. * Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE High School Diploma or GED 3+ years' work experience welding, (flux core and ceramic preferred) Welding robotics and programming a plus OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

Job Description We're Hiring: Sheet Metal Fabricator - Level 3 (Junior Foreman) Location: Norristown, PA | Pay: $31-$35/hour | Full-Time At O'Donnell Metal Fabricators, we're more than a job shop-we're a small team of problem-solvers who take pride in precision, quality, and craftsmanship. With fewer than 20 employees, we run lean, fast, and focused. Everyone here counts, and no one's work goes unnoticed. We don't do red tape. We don't punch clocks. We build real things with real value-and we invest in people who want to grow. Position Summary: We're hiring a Level 3 Sheet Metal Fabricator (Junior Foreman) who can guide jobs through production, troubleshoot challenges, and support the shop with precision and pride. You'll be hands-on and team-focused, with room to grow into a full foreman role. What You'll Do: Perform advanced fabrication using TIG & MIG welding Operate and oversee use of press brake, shear, and layout tools Interpret complex work orders and blueprints Provide support and mentorship Collaborate with design and project teams What You Need: 4-6 years of fabrication experience Strong welding and layout skills Proficiency reading and interpreting technical drawings High school diploma or equivalent Valid driver's license Compensation & Benefits: $31-$35/hour based on experience Paid Time Off (PTO) and Paid Holidays Health Insurance and Retirement Benefits Growth into senior leadership roles Working Conditions & Physical Demands: This position operates in a fabrication shop environment. While performing the duties of this job, the employee is regularly exposed to moving machinery, metalworking tools, airborne particles, heat, and noise associated with fabrication equipment. Proper PPE (personal protective equipment) is provided and required. The role requires the ability to: Stand, bend, and walk for extended periods Lift and move materials weighing up to 50 lbs regularly Use hand and power tools with precision and control Read and interpret blueprints, technical drawings, and work instructions Work safely in a fast-paced, production-driven environment Occasionally work in awkward positions or confined spaces as needed Lead from the Floor. Earn Your Influence. This isn't middle management. This is hands-on leadership. You know how to get the job done-and help others get better while you're at it. If you're ready to set the pace, raise the bar, and grow your voice in the shop, apply now! We Promote Performance, Not Politics O'Donnell Metal Fabricators is an equal opportunity employer. We reward people who lead with action, not attitude. Bring your best. Push for better. That's what earns respect around here. Powered by ExactHire:187989

At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking talented Metal Fabricators to join our fast-paced, dedicated, and extremely talented team. Candidates should have a strong working knowledge of drawings, schematics, and blueprints to work from to fabricate products and fixtures. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:30AM-5:00PM Monday-Thursday. Responsibilities: TIG welding of nonferrous alloys: brass, aluminum, etc. for furniture building. Providing assistance with manual machining & milling. Performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. Understanding and using PPE Qualifications: 5+ years' experience in a production environment Proven track record with hand tools, power tools, and typical shop equipment (band saw, drill press, grinding/sanding machines, etc.) 3-5 years of MIG & TIG welding on steel required (16 gauge-quarter inch thicknes) Highly advanced in interpreting blueprints and drawings. Consistent attention to detail; ensuring highest quality of finished products and minimal rework. Experience with furniture building, architectural elements, or mechanic work (or similar field) required. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week (6:30AM-5:00PM M-Th) Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

If you have skills with welding, bending, and grinding metal, we are interested in speaking with you. We are a modern fabrication shop located in Warminster PA that serves the Power and Utility industry. We make cool tools! We are looking for a full-time fabricator that is proficient with, hand tools, welding (MIG and TIG), setting up and operating a press brake, and accurately measuring, and cutting parts (within 1/16'). Experience with a CNC plasma table and the ability to operate a forklift is a plus. Additionally, we use robotic welding and tube bending to build our products. Benefits Summary: We offer a competitive salary and an excellent benefits package, including medical, dental, vision and prescription. Company paid life insurance and LTD, STD, 401(k) plan with company match, FSA, and HSA accounts. Vacation, Sick Personal days and much more. * This is a Safety-sensitive position. If offered the position, candidate must successfully pass a background check which includes criminal, and drug testing.

Job DescriptionOverview We seek a skilled and motivated Fitter-Fabricator, ideally with 5+ years of experience in a custom metal fabrication environment. In this role, you can work on various projects, utilizing your expertise in welding and fabrication to create high-quality products. We want to hear from you if you're passionate about your craft and enjoy working in a collaborative environment! Responsibilities Strong fit-up and Forming is a priority for our next round of fabricators, who we would like to join our team. Perform welding and fabrication tasks using various techniques and materials. Ensure all work meets quality standards and adheres to safety regulations. Collaborate with team members to troubleshoot and resolve fabrication issues. Maintain a clean and organized workspace, ensuring tools and equipment are in good condition. Participate in ongoing training and development to enhance skills and knowledge. Qualifications Proven experience as a welder-fabricator in a similar role. Proficiency in CAD/CAM software for design and fabrication. Strong ability to read and interpret blueprints and technical drawings. Knowledge of various welding techniques and materials. Excellent attention to detail and problem-solving skills. Ability to work independently and as part of a team. Strong commitment to safety and quality standards. You should be proficient in: CAD/CAM Software Blueprint Reading

On behalf of VetJobs/MilitarySpouseJobs, thank you for your interest. We are assisting our partnering company, listed below, with this position. It is open to Veterans, Transitioning Military, National Guard Members, Military Spouses, Wounded Warriors, and their Caregivers. If you have the required skill set, education requirements, and experience, please click the submit button and follow for next steps. Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 300,000 square feet of heavy manufacturing space located in The Navy Yard in Philadelphia. Rhoads' capabilities enable our customers to achieve superior results by deploying our diverse, highly skilled workforce and fabrication capabilities across commercial, government and maritime projects, all backed by state‐of‐the‐art resources and a 100+ year legacy of leadership. As a member of the Rhoads team, you'll join a quickly growing team of energetic, skilled tradespeople and professionals who are committed to delivering exceptional products and services to our customers across every market we serve. We are building on our success across more than a century by continuing to grow an innovative company dedicated to building exciting careers. Come join our journey, and experience what it means to be Done Right with Rhoads. We are currently seeking experienced Structural Steel Fabricators to join our team. The Structural Steel Fabricator will be responsible for fabricating, assembling, and installing structural components and systems on ships and marine vessels. The ideal candidate will have a strong understanding of shipbuilding principles, be proficient in reading blueprints and technical drawings, and possess excellent welding and metalworking skills. We are seeking candidates who are available to work 1st shift (M-TH, 6am-4:30pm) or 2nd shift (M-TH, 4pm - 2:30am.) This role requires flexibility including weekends and overtime as business needs dictate. What You Will Be Doing Interpret and analyze technical drawings, blueprints, and specifications to determine project requirements. Fabricate and assemble structural components, such as bulkheads, frames, and hull sections, using various metalworking techniques and equipment. Measure, cut, and shape metal components to precise specifications. Weld, braze, or solder metal parts together using appropriate techniques and equipment. Install and fit components and systems, including piping, ventilation ducts, and machinery supports, in accordance with project plans and specifications. Perform repairs and modifications to existing ship structures as needed. Inspect work pieces and finished products to ensure they meet quality standards and regulatory requirements. Follow safety protocols and guidelines to maintain a safe working environment. Collaborate with other tradespeople, engineers, and project managers to ensure efficient project execution. Maintain accurate records of work performed and materials used. Your Background High school diploma or equivalent. Must be a US citizen. +5 years of proven experience as a ship fitter or similar metal working role (iron working, structural steel, etc.), within in a maritime or shipbuilding environment? Proficiency in reading and interpreting technical drawings, blueprints, and specifications. Strong welding and metalworking skills, including experience with various welding processes (e.g., arc welding, MIG welding, TIG welding). Familiarity with shipbuilding materials, tools, and equipment. Knowledge of shipbuilding principles and practices. Attention to detail and precision in workmanship. Ability to work independently and as part of a team. Good communication and interpersonal skills. Ability to work in a physically demanding environment and lift heavy objects. Vocational training or certification in metalworking, welding, or ship fitting. Previous experience in marine construction, ship repair, or shipbuilding. Knowledge of marine regulations and classification society standards. Familiarity with shipyard safety practices and procedures. The Work Environment at Rhoads The performance of this position involves exposure to construction or industrial areas where the use of personal protective equipment such as safety glasses, hard hats and hearing protection is required. What Rhoads Can Offer You At Rhoads Industries, our team is the foundation of our success. Along with a competitive salary, we offer a variety of additional benefits designed to support your well-being and promote a healthy work-life balance for you and your family. Benefits include: Competitive health insurance packages 401k matching PTO Our Location We are based out of The Navy Yard in Philadelphia, a reimagined industrial locale with more than 150 companies, 15,000+ people, 20 acres of parks, dining options, public art, and events throughout the year. Recognized as a leading model for repurposing military and industrial assets for a diversified modern economy, The Navy Yard has been dubbed “the coolest shipyard in America.” For more information about Rhoads Industries and our opportunities please visit RhoadsInc.com and follow us on LinkedIn. Rhoads Industries, Inc. is an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, and disability. Pay Range: $30 - $32 per hour

Job Description This position will support our Production Department by fabricating components, tubing, and sheet metal used in the manufacture of specialty gas delivery systems. In addition to being able to read and understand drawings and job travelers, the applicant must also have experience with precision measuring tools and basic math, mechanical assembly, power tools, hand tools, and have good manual dexterity. The hours for this position are 7:00am to 3:30pm Monday-Friday. Responsibilities Include: Read project drawings, work orders, and procedures Layout, drill, tap, or punch holes in sheet metal enclosure units Cut stainless steel tubing to length using an automatic saw Face stainless steel tubing to length using a tube facing tool Bend stainless steel tubing to drawing spec using hand tube benders Position, align, and adjust components for proper fit & function Fabricate tubing and sheet metal to tight tolerances using calipers or other precision measuring tools Complete production paperwork and recordkeeping Maintain a clean, neat, and safe work area Follow company policy and production safety procedures Essential Skills: Quality/detail oriented with the ability to achieve repeatable results Strong mechanical aptitude Strong appreciation for time management, priorities, and deadlines Requirements: Must have good vision and dexterity Must be able to stand, bend, twist, and sit throughout the day for extended periods of time Be able to follow protocols and direction thoroughly and repetitively 1-2 years' experience in a production, assembly, or manufacturing environment Familiarity with the operation of common manufacturing tools and equipment Ability to lift 50 lbs. Applied Energy Systems is an equal opportunity/ affirmative action employer.

Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 300,000 square feet of heavy manufacturing space located in The Navy Yard in Philadelphia. Rhoads' capabilities enable our customers to achieve superior results by deploying our diverse, highly skilled workforce and fabrication capabilities across commercial, government and maritime projects, all backed by state‐of‐the‐art resources and a 100+ year legacy of leadership. As a member of the Rhoads team, you'll join a quickly growing team of energetic, skilled tradespeople and professionals who are committed to delivering exceptional products and services to our customers across every market we serve. We are building on our success across more than a century by continuing to grow an innovative company dedicated to building exciting careers. Come join our journey, and experience what it means to be Done Right with Rhoads . We are currently seeking experienced Structural Steel Fabricators to join our team. The Structural Steel Fabricator will be responsible for fabricating, assembling, and installing structural components and systems on ships and marine vessels. The ideal candidate will have a strong understanding of shipbuilding principles, be proficient in reading blueprints and technical drawings, and possess excellent welding and metalworking skills. We are seeking candidates who are available to work 1st shift (M-TH, 6am-4:30pm) or 2nd shift (M-TH, 4pm - 2:30am.) This role requires flexibility including weekends and overtime as business needs dictate. What You Will Be Doing Interpret and analyze technical drawings, blueprints, and specifications to determine project requirements. Fabricate and assemble structural components, such as bulkheads, frames, and hull sections, using various metalworking techniques and equipment. Measure, cut, and shape metal components to precise specifications. Weld, braze, or solder metal parts together using appropriate techniques and equipment. Install and fit components and systems, including piping, ventilation ducts, and machinery supports, in accordance with project plans and specifications. Perform repairs and modifications to existing ship structures as needed. Inspect work pieces and finished products to ensure they meet quality standards and regulatory requirements. Follow safety protocols and guidelines to maintain a safe working environment. Collaborate with other tradespeople, engineers, and project managers to ensure efficient project execution. Maintain accurate records of work performed and materials used. Your Background High school diploma or equivalent. Must be a US citizen. +5 years of proven experience as a ship fitter or similar metal working role (iron working, structural steel, etc.), within in a maritime or shipbuilding environment? Proficiency in reading and interpreting technical drawings, blueprints, and specifications. Strong welding and metalworking skills, including experience with various welding processes (e.g., arc welding, MIG welding, TIG welding). Familiarity with shipbuilding materials, tools, and equipment. Knowledge of shipbuilding principles and practices. Attention to detail and precision in workmanship. Ability to work independently and as part of a team. Good communication and interpersonal skills. Ability to work in a physically demanding environment and lift heavy objects. Vocational training or certification in metalworking, welding, or ship fitting. Previous experience in marine construction, ship repair, or shipbuilding. Knowledge of marine regulations and classification society standards. Familiarity with shipyard safety practices and procedures. The Work Environment at Rhoads The performance of this position involves exposure to construction or industrial areas where the use of personal protective equipment such as safety glasses, hard hats and hearing protection is required. What Rhoads Can Offer You At Rhoads Industries, our team is the foundation of our success. Along with a competitive salary, we offer a variety of additional benefits designed to support your well-being and promote a healthy work-life balance for you and your family. Benefits include: Competitive health insurance packages 401k matching PTO Our Location We are based out of The Navy Yard in Philadelphia, a reimagined industrial locale with more than 150 companies, 15,000+ people, 20 acres of parks, dining options, public art, and events throughout the year. Recognized as a leading model for repurposing military and industrial assets for a diversified modern economy, The Navy Yard has been dubbed “the coolest shipyard in America.” For more information about Rhoads Industries and our opportunities please visit RhoadsInc.com and follow us on LinkedIn. Rhoads Industries, Inc. is an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, and disability.

Job Description: Welder: Shift: 6 AM - 2:30 PM: Responsible for preparing and welding aftermarket custom exhaust components. Strong communication and math skills. Good interpersonal skills with the ability to communicate and interface positively with other team members and departments. Must be able to stand for the duration of the shift and able to lift up to 50lbs unassisted. Conduct quality workmanship, attention to detail and customers' satisfaction. Ability to read and comprehend blueprints. Practice safe work habits, follow safety guidelines, and support company safety initiatives. Perform daily organization and cleanup of work area. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required. Ensure that all Hanwha Philly Shipyard safety procedures, rules and regulations are followed and met Knowledge and proficiency of heavy shipyard construction welding in all positions using approved WPS (Welding Procedure Specification) determined by Hanwha Philly Shipyard and classification society Welding process includes: FCAW - Flux Core Arc Welding SMAC - Shielded Metal Arc Welding SAW - Submerged Arc Welding EGW - Electro Gas Welding Automated Welding Processes Stainless Steel Fillet Welding Padding and preparing weld joints per WPS Carbon Arc Gouging Note: Not inclusive, shall be determined by vessel specification and classification rules Knowledge, understanding and demonstration of interpreting approved WPS set forth at Hanwha Philly Shipyard Knowledge and ability on how to use all tools related to welding, including basic trouble shooting and maintaining welding equipment to assure a safe and efficient operation Welder must proficiently demonstrate welding ability through performance, and testing as determined by vessel project and classification Welder must be able to work in a team environment Welder shall perform internal quality checks of own work performance to assure quality standards are achieved daily Welder shall maintain their individual NDT rejection set forth by Hanwha Philly Shipyard and classification society Perform other related duties as required and assigned COMPETENCIES Work Independently according to valid instructions and Hanwha Philly Shipyard rules and standards Flexible cooperation with team members Must be able to work in different environments and areas (e.g. indoors, outdoors, in confined spaces, on scissor lifts and aerial lifts, and in inclement weather) Ability to orient, train and instruct lesser skilled welders SUPERVISOR RESPONSIBILTY This position has no supervisory responsibilities. WORK ENVIRONMENT Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. *Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE High School Diploma or GED 3+ years' work experience welding, (flux core and ceramic preferred) Welding robotics and programming a plus OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

Labor One is currently hiring Structural welders in Pascagoula, MS at a Shipyard. Job Requirements: Three years of experience in shipyard. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations, and warnings. Must pass a hearing test, drug test and PFT. Must be able to work any shift and overtime. Test: (3) position vertical, horizontal, overhead on 1” plate. (2) bends. Send resume to ehinojosa@laboronetx.com

Welder BH Job ID: 3613 SF Job Req ID: 16641 Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: Welder Location: West Chester, PA (Zeks Compressed Airs - 1302 Goshen Pkwy. West Chester, PA 19380) Shift: Monday - Friday 6:00 am - 2:30 pm About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled assembler to perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. Responsibilities: * Performs hand-welding operations with close visual attention in the hand/eye coordination process * Takes care in blocking, clamping, or holding parts in relative position to avoid distortion • Operates welding machine and regulates currant and voltage for proper fusion of metals * Adjusts wire, feed, power and gas as required * Operates shears, punch presses, and press brakes to provide assistance as required * Performs materials handling functions including preparation of inventory transaction * Maintains quality of products * Learns to use Statistical Process Control to control the manufacturing process and eliminate waste * Performs time studies to keep process times correct * Designs and implements process improvements * Performs specified preventative maintenance on equipment * Learns and observes safety and good housekeeping practices * Takes extreme care in handling welding equipment to prevent serious injury or damage to themselves, other or the facility * Schedules work as required to meet production requirements * Adjusts personnel assignments to assure rotation * Resolves capacity problems by personnel movement or obtaining assistance Requirements: * High School Diploma or GED * 2+ years of experience in TIG and MIG welding. * 1+ years of experience in Blueprint Reading Core Competencies: * Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures. * Able to rely on experience and judgment to plan and accomplish goals. * Ability to identify routine problem causation, and correct routine problems, and willingness to learn. * Broad working knowledge and experience with standard work instructions. * Team oriented, must have the ability to work cohesively with others. * Must possess ability to work well in a manufacturing environment. * Must be detail-oriented and self-motivated. * Must be able to work in a fast-paced, multi-tasked environment. Preferences: * 2+ years of experience in a manufacturing setting preferred. * Knowledgeable of and able to utilize computer systems. * Ability to understand and interpret information in the form of graphs, blueprints, reports and other forms of data and information. * Knowledge of pipefitting skills. Travel & Work Arrangements/Requirements: This position will be based at our site in West Chester, PA no travel. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************

Job Title: Welder 1st Shift (7:00am-3:00pm Mon-Fri) Department: FabricationAccountability: This position reports to the Production Supervisor - Fabrication Responsibilities:•Responsible for welding various metals: stainless steel, aluminum, carbon steel.•Welds and Fabricates custom parts using a variety of machines including but not limited to, Millermatic 250 Mig Welder, Syncrowave 350 LX Tig Welder•As workload requires, this position may involve other fabrication work in area's such but not limited to Fastener Insertion Press, Shear, Spot Weld Machine, Auto-weld machine, Milling machine, Deburring, and Sanding Equipment•Executes to work orders and engineering drawings•Receives verbal orders to fabricate custom designed parts and products•Receives written and verbal instruction on priority of orders•Receives, checks and handles raw material from inventory as needed•Sets up for daily work according to production schedule and/or verbal instructions•Checks parts, products and machinery for defects•Works at different workstations as job requires•Maintains a clean safe work area•Moves finished goods to other inventory or work areas•Assists with special projects as assigned by supervisor Requirements:•High School Diploma or GED•Must supply own basic hand tools•Must be able to safely operate a forklift and other material handling equipment•Able to MIG and TIG weld up to ¼” steel and aluminum.•Ability to Read and Interpret Quality Documents and Drawings•Able to perform basic mathematical computations•Must regularly be able to lift and move from 50 to 100 lbs•Must be able to tolerate long periods of standing Work Environment - Manufacturing:•Chemicals, (See SDS)•Machinery•Dust•Paint•Noise•Protective Clothing and Equipment Required Company Details Havis is at the forefront of revolutionizing industries by unlocking the full potential of technology to drive productivity and enhance safety through innovative mobility solutions. We take pride in being the trusted partner of choice for technology providers, enabling them to move business forward in a wide range of industries, such as Retail & Hospitality, Public Safety, Energy & Utilities, Warehouse & Distribution, Field Operations, Transportation & Logistics, Healthcare, and Military Defense. Havis designs and manufactures market-leading Computing, Mounting, Power, and Transport Solutions. Our engineering and product development centers serve as the backbone of our commitment to excellence. With a team of highly-skilled engineers who have a deep understanding of design, manufacturing processes, and cutting-edge technologies, Havis consistently delivers products that set our market and industry standards and exceed customer expectations. Our state-of-the-art manufacturing facilities complement our engineering capabilities, allowing us to bring our design concepts to life with precision and efficiency. Our focus on quality and rigorous testing protocols ensures that our products are built to withstand the demands of real-world applications. We are a dynamic and customer-focused company that continuously strives to meet and exceed the evolving needs of our valued customers. We firmly believe that collaboration lies at the heart of successful partnerships, and we actively engage with our clients to understand their unique requirements, challenges, and goals. By fostering open lines of communication, we work together to develop innovative solutions that drive safety, productivity, and, ultimately, customer satisfaction. Havis collaborates with partners and customers to provide product information, installation support, updates on industry testing and validation requirements to solve diverse challenges in the field. Havis, Inc. - Website: ************* Headquartered in Warminster, PA ISO 9001 and 14001 Certified - Quality Management System Fast growing company in a niche, growing marketplace Company offers Health, Dental, Vision and 401(k) Plan with employer match 100% employer paid STD, LTD and Life & ADD benefits Generous paid time off (PTO) and holiday benefits Competitive pay commensurate with education, skills, and experience Prepared By: Human ResourcesApproved by: Production Manager

Join Our Team: Shop Welder & Fabricator At Precision Hydraulics, we pride ourselves on being at the forefront of the waste equipment industry, offering top-notch retail and industrial equipment repair and maintenance services. We are currently looking for Welders and Fabricators to join our team to repair balers, compactors, and other industrial equipment at our Norristown, PA based shop. This role involves working on hydraulics, basic electrical operations, and welding fabrication to ensure safe and efficient site operations. **Minimum Requirements: ** 1. High School Diploma or G.E.D. 2. 1-2 years of experience in compaction maintenance and repair 3. Proficiency with basic and advanced hand tools 4. Ability to lift up to 50 pounds, climb ladders, and possess a mechanical background 5. Valid Fit-Test certification 6. Reliable transportation is required. **Essential Functions: ** -Conduct inspections, diagnostic tests, preventative maintenance, and repairs on various types of compactors and stationary equipment - Read electrical schematics and diagnose/repair electrical issues using single and three-phase AC voltage, including high-voltage electricity - Read hydraulic schematics and diagnose/repair hydraulic issues - Maintain knowledge of proper installation procedures for compactors and other stationary equipment - Perform or assist with installations, ensuring deadlines are met - Execute welding and fabrication tasks as needed - Accurately complete paperwork and enter data related to equipment repairs in a timely manner - Adhere to all safety policies and procedures - Perform other job-related duties as assigned **Company Culture: ** Our culture is described as customer service oriented, competitive, and growth oriented. Benefits include: Retirement Plan with Company matching Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Vision insurance Safety Incentive Program **Work Details: ** - Type of work: Other - Work Location: Fabrication Shop - Open to applicants without a college diploma - Remote work: No - Job Type: Full-time - Pay: $22.00 - $28.00 per hour

MCR Services, Inc. has completed a wide variety of projects along the Eastern Seaboard from Virginia to Maine, which includes residential sub-divisions, schools, distribution centers, supermarkets, strip malls, retail fit-outs, commercial free-standing buildings, office buildings, hotel complexes and much more. Our mission, as an industry leader in the creation of commercial and retail facilities, is to provide the best quality of services to our clients through superior workmanship, dedication, commitment and meticulous attention to detail, ultimately delivering complete satisfaction. Our work ethics and values are the foundation to our success and we pledge to continue providing paramount services to our clients. Job Description Position summary: use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Qualifications · Demonstrated experience as a professional welder. · Ability to strictly adhere to all safety standards. · Demonstrated ability to accept and follow instructions from others. · Willingness and ability to work cooperatively with others. · Strong knowledge of welding equipment, materials, etc.. · Must successfully complete pre-access drug and alcohol testing. · Must have a valid driver's license. Additional Information · Weld components in flat, vertical, or overhead positions. · Operate safety equipment and use safe work habits. · Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. · Measure dimensions of completed products or workpieces to verify conformance to specifications . · Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. · Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys . · Select production equipment according to product specifications. · Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. · Monitor equipment operation to ensure that products are not flawed. · Review blueprints or other instructions to determine operational methods or sequences. · Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. · Clean workpieces or finished products. · Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. · May perform other related duties as assigned. Must have, or be able to obtain, OSHA 10 certification.

Job Description We're Hiring: Sheet Metal Fabricator - Level 4 (Foreman) Location: Norristown, PA | Pay: $36-$40/hour | Full-Time At O'Donnell Metal Fabricators, we're more than a job shop-we're a small team of problem-solvers who take pride in precision, quality, and craftsmanship. With fewer than 20 employees, we run lean, fast, and focused. Everyone here counts, and no one's work goes unnoticed. We don't do red tape. We don't punch clocks. We build real things with real value-and we invest in people who want to grow. Position Summary: We're looking for a Level 4 Sheet Metal Fabricator (Foreman) who can take the lead on jobs, uphold shop standards, and coach the next generation of fabricators. This is a high-trust, high-impact role for someone who leads with both hands and heart. What You'll Do: Lead fabrication projects and manage priorities Oversee machinery use and ensure quality control Mentor and train team members Coordinate with internal teams to hit deadlines What You Need: 7+ years in a fabrication setting Advanced technical skills and welding proficiency Strong ability to lead others and manage priorities High school diploma or equivalent Valid driver's license Compensation & Benefits: $36-$40/hour based on experience Paid Time Off (PTO) and Paid Holidays Health Insurance and Retirement Benefits Influence over shop processes and team development Working Conditions & Physical Demands: This position operates in a fabrication shop environment. While performing the duties of this job, the employee is regularly exposed to moving machinery, metalworking tools, airborne particles, heat, and noise associated with fabrication equipment. Proper PPE (personal protective equipment) is provided and required. The role requires the ability to: Stand, bend, and walk for extended periods Lift and move materials weighing up to 50 lbs regularly Use hand and power tools with precision and control Read and interpret blueprints, technical drawings, and work instructions Work safely in a fast-paced, production-driven environment Occasionally work in awkward positions or confined spaces as needed Own the Outcome. Set the Standard. This is your floor. Your team. Your legacy. We're looking for someone who doesn't just weld parts together-but welds a crew into a high-functioning unit. If you've got the experience and the backbone to lead with pride and precision, apply now! We Respect Leadership That's Earned, Not Assigned O'Donnell Metal Fabricators is an equal opportunity employer. We back leaders who lead by example-regardless of background. If you know how to get results, build people up, and take ownership, you'll have a voice here. Powered by ExactHire:187991

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking talented Metal Fabricators to join our fast-paced, dedicated, and extremely talented team. Candidates should have a strong working knowledge of drawings, schematics, and blueprints to work from to fabricate products and fixtures. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:30AM-5:00PM Monday-Thursday. Responsibilities: TIG welding of nonferrous alloys: brass, aluminum, etc. for furniture building. Providing assistance with manual machining & milling. Performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. Understanding and using PPE Qualifications: 5+ years' experience in a production environment Proven track record with hand tools, power tools, and typical shop equipment (band saw, drill press, grinding/sanding machines, etc.) 3-5 years of MIG & TIG welding on steel required (16 gauge-quarter inch thicknes) Highly advanced in interpreting blueprints and drawings. Consistent attention to detail; ensuring highest quality of finished products and minimal rework. Experience with furniture building, architectural elements, or mechanic work (or similar field) required. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week (6:30AM-5:00PM M-Th) Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Job DescriptionOverview We seek a skilled and motivated Welder-Fabricator, ideally with five or more years of experience in a custom metal fabrication environment. In this role, you can work on various projects, utilizing your expertise in welding and fabrication to create high-quality products. We want to hear from you if you're passionate about your craft and enjoy working in a collaborative environment! Responsibilities Strong TIG welding is a priority for our next round of fabricators, who we would like to join our team. Perform welding and fabrication tasks using various techniques and materials. Ensure all work meets quality standards and adheres to safety regulations. Collaborate with team members to troubleshoot and resolve fabrication issues. Maintain a clean and organized workspace, ensuring tools and equipment are in good condition. Participate in ongoing training and development to enhance skills and knowledge. Qualifications Proven experience as a welder-fabricator in a similar role. Proficiency in CAD/CAM software for design and fabrication. Strong ability to read and interpret blueprints and technical drawings. Knowledge of various welding techniques and materials. Excellent attention to detail and problem-solving skills. Ability to work independently and as part of a team. Strong commitment to safety and quality standards. You should be proficient in: CAD/CAM Software Blueprint Reading

Job DescriptionJob Summary: Welder:Play a vital role in our metal fabrication process. Your primary responsibility will be to perform MIG welding on various metal components. Your work will contribute directly to the production of high-quality products that meet our clients' expectations. Attention to detail, precision, and adherence to safety protocols are crucial in maintaining the exceptional standards set by the company. Responsibilities: Welder: Perform MIG welding on carbon steel, stainless steel, and aluminum components, adhering to blueprints, engineering specifications, and verbal instructions. Set up and operate welding equipment accurately, ensuring precision and efficiency in all welding tasks. Inspect welds for quality, making necessary adjustments to meet Company's high standards. Work collaboratively with team members to meet production deadlines and maintain workflow. Adhere strictly to safety protocols to ensure a safe working environment. Maintain and perform regular cleaning and upkeep of welding equipment to ensure optimal performance. Requirements: Welder: Preferred minimum of 3 years of experience in Welding within a manufacturing or metal fabrication environment. Proficiency in working with carbon steel, stainless steel, and aluminum. Strong understanding of MIG welding techniques and the ability to operate and troubleshoot welding equipment. Ability to read and interpret blueprints, specifications, and verbal instructions for precise welding operations. High attention to detail and ability to produce consistent, high-quality welds. Positive attitude, strong work ethic, and flexibility to adapt to changing needs in a dynamic environment. Ability to work both independently and as part of a team to achieve production goals. Welding certifications (e.g., AWS) are preferred but not required. Robotic Welding experience is an ADDED advantage! Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.