Field engineer jobs in Johns Creek, GA

Our client is a trusted IT infrastructure and managed services provider serving enterprise customers worldwide. Based out of Dallas, they are looking to hire an IT Project Coordinator/Customer Engineer on a Contract basis. Contract Duration: 6 Month Contract (Potential for extension or conversion) 70-80% travel (both in state and out of state) is required for on-site installations at client locations. There will be mileage reimbursement for the travel. Required Skills & Experience Coordinator for IT Projects at assigned location(s) Single Point of Contact (SPOC) in all matters of Technology at assigned location(s) Collaborate and Coordinate with Clients, Vendors, and Project Management Teams as needed. Ensure that all Site standards are met via Standard Operating Procedures (SOP) and methodology Perform quality work on all deliverables including deployment and network activities Ensure customer satisfaction Ability to install and deploy all field technologies. (POS, Desktop, Label Printers, Office Printers, Kiosks, Tablets, Cabling, and smart hands for Network Equipment). IMAC Services. Perform installation, move, add, and Change for all Supported Equipment at assigned location(s) Performs general preventative maintenance tasks on computers, laptops and any other authorized peripheral equipment Daily Responsibilities Face-to-face customer service experience Proven IT Support and Field Service experience (7+ YoE) Project Management knowledge, Experience in : Incident Management, Problem Management, Change Management, Knowledge Management Proficient in network topology, familiar with rack and stack (Datacenter, IDF / MDF closets), minor config with assistance (assign IPs and verify network connectivity) Proficient with workplace deployment activities; desktop, monitor, docking station, PC/ Laptop / Thin client and peripherals, VoIP Ability to work efficiently as an individual and lead small or large team as required You will receive the following benefits: Medical Insurance - Four medical plans to choose from for you and your family Dental & Orthodontia Benefits Vision Benefits Health Savings Account (HSA) Health and Dependent Care Flexible Spending Accounts Voluntary Life Insurance, Long-Term & Short-Term Disability Insurance Hospital Indemnity Insurance 401(k) including match with pre and post-tax options Paid Sick Time Leave Legal and Identity Protection Plans Pre-tax Commuter Benefit 529 College Saver Plan Motion Recruitment Partners (MRP) is an Equal Opportunity Employer. All applicants must be currently authorized to work on a full-time basis in the country for which they are applying, and no sponsorship is currently available. Employment is subject to the successful completion of a pre-employment screening. Accommodation will be provided in all parts of the hiring process as required under MRP's Employment Accommodation policy. Applicants need to make their needs known in advance.

Role: Gen AI/ML Engineer Mode of Work: 3 days per week onsite required Required experience: 10+ Years Key Responsibilities: Assist in designing, developing, and training machine learning models. Implement ML pipelines and support model evaluation, optimization, and deployment. Work with data preprocessing tools to clean, transform, and prepare datasets. Collaborate with senior engineers and cross-functional teams to implement ML solutions. Document model behavior, experiments, and results. Support research activities by exploring new techniques, tools, and frameworks. Mandatory Skills: Proficiency in Python. Working knowledge of TensorFlow or PyTorch. Strong understanding of machine learning algorithms and concepts. Preferred Skills: Exposure to data preprocessing tools like Pandas and NumPy. Basic understanding of cloud AI services (AWS, Azure, or GCP).

Splunk & Power BI Integration Engineer Career Opportunity We are looking for an experienced Splunk & Power BI Integration Engineer with a strong background in integrating data visualization platforms (Power BI) with machine data analytics tools (Splunk), heavy scripting for data manipulation and automation, and developing robust, actionable dashboards for real-time insights and operational intelligence. Splunk & Power BI Integration Engineer Role & Responsibilities Platform Integration: Design, implement, and maintain seamless integrations between Splunk Enterprise/Cloud and Microsoft Power BI to facilitate robust data flow and comprehensive visualization capabilities. Scripting & Automation: Utilize scripting languages (e.g., Python, PowerShell, SQL, DAX) to automate data extraction, transformation, and loading (ETL) processes, ensuring data integrity and efficiency in moving data between systems. Data Modeling & Management: Develop and optimize complex data models within Power BI, leveraging data sourced from Splunk and other relevant systems to support sophisticated reporting and analysis. Dashboard Development: Design, build, and deploy highly interactive and visually compelling dashboards and reports in Power BI, translating complex data sets into clear, actionable insights for stakeholders across various business functions. Splunk Expertise: Develop and manage Splunk queries, reports, and alerts. Utilize Splunk Search Processing Language (SPL) for data analysis, data normalization, and to prepare data for consumption within Power BI. Performance Optimization: Monitor and tune the performance of both Power BI reports and underlying data sources, ensuring rapid data retrieval and optimal user experience. Collaboration & Training: Collaborate with data engineers, analysts, and business users to understand data visualization requirements, provide training, and promote best practices in data analytics and visualization. Documentation & Governance: Maintain comprehensive documentation for all integrations, data models, and dashboards, adhering to data governance and security policies. Splunk & Power BI Integration Engineer Required Qualifications 5+ years of proven experience in data visualization, business intelligence, or data analytics roles, specifically working with both Microsoft Power BI and Splunk platforms. Expert-level proficiency in Microsoft Power BI (DAX, Power Query/M, Data Modeling) and strong hands-on experience with Splunk Search Processing Language (SPL). Strong command of one or more scripting languages (Python, PowerShell, or similar) for automation and data manipulation tasks. Solid understanding of data warehousing concepts, ETL processes, SQL, and database management principles. Excellent analytical and problem-solving abilities, with a keen eye for detail and the ability to translate technical data into business insights. Strong interpersonal and communication skills, capable of effectively engaging with technical teams and non-technical business stakeholders. Bachelor's degree in Computer Science, Information Systems, Engineering, or a related field, or equivalent practical experience. Splunk & Power BI Integration Engineer Preferred Qualifications Relevant certifications such as Microsoft Certified Power BI Data Analyst Associate, or Splunk Certified User/Power User/Architect. Experience with cloud platforms (e.g., Azure, AWS) and cloud-based data services (e.g., Azure Data Factory, Azure Synapse, AWS S3). Familiarity with integrating systems via APIs to extract and push data programmatically. Experience with version control systems (e.g., Git) for managing code and scripts. Prior experience in IT operations, security analytics, or a similar field where real-time operational intelligence is critical.

Ready to Drive Innovation in Medical Imaging? My client, a leader in the industry, is looking for a Sr. Field Service Engineer in Covington, GA. Salary Range: $67,000 - $101,000 + Bonus Travel: Up to 75% within the territory Benefits: Health, Vision, Dental, Retirement, PTO What's in it for you Work with cutting-edge medical imaging technology in a dynamic, customer-facing role Comprehensive benefits package starting Day 1, company car, 401K, PTO Excellent training and opportunity for upward mobility Be a technical leader and mentor for new hires Play a key role in new product launches and complex problem resolution About the Role As a Sr. Field Service Engineer, you'll provide: On-site emergency service, preventive maintenance, and installation support for radiology equipment Ensure customer satisfaction and contribute to service revenue goals Manage inventory and maintain company car/tools in top condition Generate sales leads and assist with service contracts Mentor new hires and serve as a role model for technical excellence Support new product launches and resolve complex technical issues What We're Looking For Required Qualifications: Associate's Degree in Electronics, IT Networking, Computer Science (or equivalent military training) with 4 years of experience OR Bachelor's Degree with 2 years of experience Ability to read and interpret technical manuals and schematics Strong technical trade skills (soldering, electrical installation, troubleshooting) Proven success in promoting field service programs and achieving sales/service objectives Proficiency with tools such as ServiceMax, Salesforce, and CRM systems Ability to work in a fast-paced, self-directed environment Valid driver's license and ability to travel extensively Preferred Qualifications: Experience in Medical Device or Radiology industry Ready to make an impact in healthcare technology? Apply today and join a team that values expertise, innovation, and customer care!

Company: Paryani Construction Reports To: Senior Project Manager / Project Manager Job Type: Full-Time / Salaried Exempt Experience Level: Entry to Mid-Level (0-3 Years) About Us At Paryani Construction, we are more than just builders; we are partners. We pride ourselves on a "Client First" approach, delivering complex construction projects with the sophistication of a large national firm and the agility of a boutique builder. Based in Atlanta, our portfolio spans high-stakes Healthcare, Industrial, Commercial, and Retail projects. We view the Project Engineer role as the launching pad for our future leaders. We invest in your growth because we want you to run your own projects one day. Position Summary We are looking for a motivated Project Engineer who is eager to learn the business of construction from the ground up. In this role, you will serve as the operational backbone of the project team, managing the critical flow of information between the field, the office, the design team, and the client. You will work under the direct mentorship of experienced Project Managers and Superintendents. This is not a role for someone who wants to sit behind a desk all day; you will be expected to engage with the job site, understand the building process, and help solve problems in real-time. Essential Duties & Responsibilities Document Control & Information Management Submittals: Manage the submittal process from start to finish. Review shop drawings for compliance with contract documents before submitting them to the Architect/Engineer. RFIs: Draft and process Requests for Information (RFIs). Coordinate with the field team to clarify constructability issues and track answers from the design team. Meeting Management: Prepare agendas and take detailed minutes for weekly Owner/Architect/Contractor (OAC) meetings and internal team meetings. Project Management Support Procurement: Assist in the buyout process, scoping subcontractor bids, and tracking material lead times to ensure materials arrive on site when needed. Financials: Assist the Project Manager with monthly pay applications, change order pricing, and invoice coding. Closeout: Lead the closeout process by collecting warranties, O&M manuals, and as-built drawings to deliver a complete turnover package to the client. Field Support & Quality Control Site Presence: Regularly walk the site with the Superintendent to track progress, document safety observations, and understand the sequence of work. Punch List: Manage the punch list process towards the end of the project, coordinating subcontractors to complete outstanding items efficiently. Photos: Maintain a comprehensive photo log of the project progress (using Procore or similar tools). Qualifications Education: Bachelor's Degree in Construction Management, Civil Engineering, Architecture, or related field is required. Experience: 0-3 years of experience. Previous internships in commercial construction are highly preferred. Technical Skills: Proficiency in Microsoft Office (Excel, Project) and PDF editing software (Bluebeam Revu). Familiarity with construction management software (Procore) is a major plus. Communication: Strong written skills are essential (you will be writing many professional emails and RFIs). Attitude: A "sponge" mentality-eager to learn, willing to ask questions, and proactive in finding ways to help the team. Physical Demands & Work Environment Hybrid Role: Work is split between the corporate office and active job sites. Mobility: Must be able to walk job sites, climb temporary stairs/ladders, and wear Personal Protective Equipment (PPE). Lifting: Occasional lifting of project documents or materials (up to 20 lbs). Why Paryani? Career Path: We have a clear promotion track. Successful Project Engineers are groomed to become Assistant Project Managers and Project Managers. Mentorship: You won't get lost in the shuffle. You will work directly with senior leadership who know your name and care about your development. Compensation: Competitive salary, performance bonuses, and comprehensive benefits package (Medical, Dental, Vision, 401k). Paryani Construction is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, or genetic information.

Title: Electrical Engineer Contract: 6+ Months. Long-term. Industry: Rail Transportation. ***Travel up to 50% A solid electrical engineering foundation (circuits, sensors, power distribution). Hands-on experience with troubleshooting hardware and field equipment. Practical coding ability: Python and/or C++ preferred. Experience with automation, data acquisition, or embedded systems. Understand the importance of signal integrity/EMI considerations. Ability to assist with hardware bring-up, wiring, testing, and component-level debugging. Willingness to support onsite deployments, system installation, and diagnostics. A balanced skillset: confident using a scope or meter and writing utility scripts. The Electrical Engineer role in the rail transportation industry requires a strong foundation in electrical engineering principles, including circuits, sensors, power distribution, and signal integrity/EMI considerations. The position involves hands-on troubleshooting of hardware and field equipment, assisting with hardware bring-up, wiring, testing, and component-level debugging, and supporting onsite system deployments, installations, and diagnostics, with up to 50% travel. Required skills include practical coding ability in Python and/or C++, experience with automation, data acquisition, or embedded systems, and proficiency using test equipment such as oscilloscopes and multimeters, along with the ability to develop utility scripts. The role demands a balanced combination of field-focused hardware expertise and practical software capability.

As a strong and stable company since 1960, Holder provides nationwide construction management services on complex projects in the aviation, office, technology, education, hospitality, and interiors markets. Our mission is to provide clients with quality construction services, across the country, supported by our offices in Atlanta, Charlotte, Columbus, Dallas, Denver, Phoenix, San Jose and Washington, DC. At Holder, our most valuable resources are our people, who carry forth our core values, brand, and reputation for performance. We are seeking a highly motivated Electrical Design Engineer to join our team in the Atlanta that will support Mission Critical construction operations throughout the country. The ideal candidate for this job is a team player who thrives in a challenging and fast-paced yet supported environment. Your job is to do whatever it takes to help the team succeed. Required Experiences And Skills Has experience with the design process and management of complex Mission Critical projects, including processes, teams, and deliverables Understands risks and roles associated with varying project delivery methods Understands principals of contract documents and agreements Takes initiative to identify, track and actively address design and engineering challenges during the design and construction phases of a project. Ability to read construction drawings and specifications with primary experience with electrical and controls. Understanding and able to reference and apply National Electrical Code (NEC) standards and requirements. Ability to proactively articulate design document expectations and assess actual document status by phase (SD, DD, CD) Ability to conduct cross-discipline drawing coordination and design completion/quality reviews specifically for the MEP disciplines. Can contribute constructability, technical expertise and engineering solutions to a project's design evolution Ability to lead and manage the creation of Integrated Electrical Room concepts based on client or projected selected equipment. Ability to manage subcontractors in the completion of integrated design concepts to finalized products ready for manufacturing. Outstanding communication and time management skills Ability to work in a highly-collaborative environment Ability to work with minimal supervision; self-starter Manage deadlines, maintain files, and provide reporting to department leadership and/or jobsite leadership Requirements For This Position Include Candidate will preferably have 3-5+ Years in an Engineering position. Excellent verbal and written communication skills - ability to effectively communicate across projects and departments with associates of varying skill level. Also, be able to effectively communicate with third party organizations and consulting entities. Earn the trust of associates but maintain ability to independently assess and evaluate issues. Ability to have difficult conversations, free of emotion. Have a high level of morality and ethics. Proactively adjust priorities based on department, project and company needs and communicate adjustments. Be strategic and solutions/goal oriented and detail-oriented, but flexible to changes in plan. Independent worker with a collaborative mindset. Ability to effectively collect information and ask questions, analyze, evaluate, and make recommendations and then organize the appropriate teams for group decision making. Good listener and detail oriented. Escalate issues timely. Ability to innovate and comfortable being introduced to new technology. Maintains a continuous improvement mindset. Proficient in Microsoft based software including Word, Excel, Outlook, and PowerPoint. Highly organized, detail oriented. Coach and mentor others with meaningful feedback. Open to receiving meaningful feedback. Be open to additional responsibilities as role and department services evolve.

Inter Technologies Corporation (ITC) provides expert audio-visual integration services. Our adaptable structure enables us to complete and provide follow-on support for large-scale installations throughout the United States, Canada, and Mexico. ITC is a rapidly growing and evolving family-owned and operated business and we need you to join our growing family and client list! Title: Travel Field AV Engineer Department: Operations Reports To: Vice President of Customer Success Position purpose and objective: This position is responsible and accountable for directing, installing, programming, commissioning and trouble-shooting the electronic, hardware, and wiring components of audio-visual systems according to company standards. This position reports to the Vice President of Customer Success and is a member of the Operations team supporting the mission and goals of a "Best in Class" sales and AV integration program. As an operational member of a dynamic audio-visual integration operation, the Field AV Engineer will be responsible for loading AV Control Code, GUI, and DSP configurations. After installation is complete, travel to customers sites is required to configure devices, load control code, test and commission and close-out projects in compliance with the companys policies and procedures, including quality, safety, environmental, and business practices. ****This is a travel position and requires travel to client sites locally, regionally, and nationally as needed.**** Key Responsibilities Responsibilities include but are not limited to the following. Additional responsibilities are expected to be performed as assigned. 1. System Installation & Integration Install, terminate, and test AV cabling, including fiber optics, HDMI, Cat6, and speaker wiring. Mount and configure projectors, displays, video walls, microphones, speakers, and AV control systems. Integrate and program AV control systems (Crestron, Extron, AMX, QSC, etc.). Ensure equipment is installed per project documentation, including signal flow diagrams and system schematics. Collaborate with network engineers to integrate AV equipment with IT infrastructure. 2. Testing & Troubleshooting Perform system commissioning, ensuring proper calibration and functionality of audio and video systems. Conduct signal flow verification, EQ adjustments, gain staging, and network-based troubleshooting. Diagnose and resolve issues related to hardware, software, and networking. Provide on-site or remote support for escalated service issues. 3. Client Interaction & Documentation Serve as an on-site liaison with clients, providing training and guidance on AV system operation. Document system configurations, wiring diagrams, and punch lists for project completion. Maintain service logs, test reports, and installation notes in project documentation platforms. Assist in creating end-user guides and training materials. 4. Compliance & Safety Adhere to OSHA and company safety policies when working on-site. Follow industry best practices and manufacture guidelines for AV installations. Ensure all installed equipment meets compliance standards (ADA, NEC, NFPA, etc.). 5. Project Coordination & Team Collaboration Work closely with project managers to ensure deadlines and project milestones are met. Provide feedback on project designs, suggesting improvements or modifications as needed. Qualifications Education: Associates or Bachelors degree in AV Technology, Electrical Engineering, IT, or a related field Certifications: CTS, CTS-I Certification, Crestron, Extron, Dante, Biamp, QSC, preferred. Experience: 3+ years of hands-on experience in AV installation, programming, and commissioning. Technical Skills: Proficiency in AV networking, signal flow, and troubleshooting. Experience with AV control system programming (Crestron, AMX, Extron). Understanding of DSP configuration and audio calibration. Soft Skills: Strong problem-solving ability, attention to detail, excellent verbal and written communication skills, and time management. Physical Requirements: Ability to lift 50+ lbs, work at heights, and travel. Success Factors: The personal characteristics that make an individual successful in this industry include: Client-First Mindset Deliver top-tier AV solutions with professionalism, clear communication, and attention to detail. Problem-Solver Mentality Troubleshoot issues efficiently, think on your feet, and adapt to evolving technology. Team Player Support colleagues, share knowledge, and collaborate for seamless project execution. Ownership & Accountability Take full responsibility for your work, ensuring high-quality results without excuses. Continuous Learning Stay updated on industry trends, certifications, and best practices to refine your expertise. Adaptability & Flexibility Be ready for changing schedules, travel demands, and diverse project environments. Safety & Precision Follow protocols, prioritize job-site safety, and execute installations with meticulous attention to detail. Strong Communication Keep clients, project managers, and technicians informed for smooth operations. Professionalism & Integrity Respect the technology, team, and clients by maintaining a high standard of conduct. Passion & Positive Attitude Bring energy, enthusiasm, and a problem-solving approach to every job. Job offer consists of a competitive salary and benefits package that includes: Paid vacation and sick pay Medical coverage options: health, vision and dental Generous daily per diem while traveling overnight to cover meals and non-reimbursable incidentals In-house travel team to make all work-related travel arrangements including air flights, ground transportation and lodging all paid through company accounts 401k program after one year of service and with employer contribution after one year of enrollment Tool kit, uniform shirt, PPE and a stipend per paycheck as a personal cell phone allowance Job Type: Full-time Pay: Salary commensurate with experience Job Location: As a Travel Field Engineer, you will be required to travel locally, regionally, and nationwide to support client projects. Travel frequency will vary based on project demands, and candidates should be comfortable with extended travel, including overnight stays as needed. *Benefits listed are a highlight of what are offered to full-time, salaried and hourly employees and are subject to change. The ADA prohibits discrimination against qualified individuals with disabilities. To determine whether an individual is qualified, the essential functions of each job should be identified. Essential job functions are those that are intrinsic to the position, and the individual who holds the job must be able to perform with or without reasonable accommodation. PI2c4f0632ea59-31181-39200273

MCA, your trusted advisor for wireless communications, data, and security, is seeking an experienced Field Engineer in the Atlanta, GA area to support our fast-growing Security division. MCA seeks team members who share our values: service, growth, teamwork, and safety. As a Military Friendly Employer, we welcome veterans, with over 250 already on board. Join us and become part of the MCA family, where we prioritize both work and enjoyment. We offer competitive compensation and benefits such as Medical, Dental, Vision, 401K, PTO, Holiday Pay, Education Incentives, and more. WHAT YOU WILL BE DOING: Overseeing of system infrastructure, system hosting, system connectivity, and system licensing. Program and commission systems for projects. Develop programming documents and system matrices. Perform pre-installation programming, kitting, and device configuration. Provide technical support to other technicians. Apply digital licenses as needed. Ensure quality assurance on system installations. Maintain and enforce device labeling standards. Collaborate with engineering during design and drafting phases. Contribute to the Design Team by providing drawings, red lines, and as-builts. Participate in the review process for large or complex projects. Provide field support and on-the-job training for technicians, including technical and standards training. Maintain and update job specifications as needed. WHAT YOU WILL BRING TO THE TEAM: 5 years of experience in physical security. A bachelor's degree is preferred or equivalent work experience. Expert knowledge in Lenel OnGuard Enterprise architecture. Experience in managing, installing, configuring, engineering, and designing. Experience with one or more of the following systems: Lenel S2, Avigilon, Genetec, Axis, Milestone, and other major OEMs. Ability to maintain a US Government Public Trust Clearance (current active clearance, desired). YOUR ENVIRONMENT AND PHYSICAL REQUIREMENTS: The physical environment requires the employee to work inside and outside in various conditions. While performing the duties of this job, the employee is required to frequently stand, walk, sit, use hands to handle or feel objects, tools, or controls, reach with hands and arms, climb stairs, talk or hear, utilize personal protective equipment, lift from the floor, frequently work in outdoor weather conditions, move equipment weighing up to 50 pounds, ascend/descend a ladder, operate a motor vehicle, and position themselves to maintain computers or other equipment as needed. On-call for critical systems maintenance may be required. First shift hours Monday - Friday, with occasional 2nd or 3rd shift and weekends depending on project schedules. TRAVEL REQUIREMENTS: Travel as necessary to support company and customer needs. DIRECT REPORTS: No Direct Reports WHO WE ARE: Mobile Communications America, Inc. (MCA) provides wireless communication, data, and security solutions that enhance workplace safety, security, and efficiency nationwide. Customers trust us to provide a portfolio of turn-key systems, products, and services - including two-way radio communications, vehicle uplift, security video and access control systems, BDA/DAS, remote monitoring, GPS tracking, SCADA, dispatch, mass notification, and point-to-point wireless networks. Our more than 60,000 customers span industries such as public safety, commercial, manufacturing, education, healthcare, utilities, and government. In addition to being the largest Motorola partner in the U.S., MCA has strategic partnerships with over 1,000 major manufacturers to offer an extensive portfolio of products and technologies. WHAT WE BELIEVE: We are better together through the MCA Way: living our core values of Service First, Growth, Teamwork, and Safety. We take our work and customers seriously and believe our best work can be fun. A component of our business that embodies the MCA advantage is our “Service First DNA” culture. Service isn't just a motto for MCA, it's an integral part of who we are and goes beyond our customers to our employees, partners, shareholders, and communities. NOTE: The above statements describe the general nature and level of work performed by the person assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, skills, and physical demands required of personnel so classified. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Mobile Communications America, Inc. is proud to be an Equal Opportunity workplace and is an Affirmative Action employer. We are committed to creating an inclusive environment that celebrates diversity. At MCA, we are “better together.”

Together, We Enhance Innovation and Growth i2G specializes in advanced physical electronic security and life safety solutions. I2G has proven experience in surveillance, access control, and intrusion detection systems, biometrics, fence sensors, radars, ground sensors, anti-drone technologies, and more. We excel in design, project management, commissioning, and enterprise technology integrations. i2G's mission is to provide the products and services that meet our customers' needs to give them a vital advantage in today's market, helping to protect what matters most. This position will provide engineering design and support for security solutions for new and existing clients while working alongside internal teams, external teams, clients, and subcontractors to ensure project success. Responsibilities Possess a thorough understanding of standard Electronic Security technology (ACS, IDS, FDS, CCTV) and supporting equipment such as computer software/hardware, databases, and networking infrastructure. Ability to review architectural, electrical, telecommunication, security engineering floor plans, riser drawings, device schedules, and detail drawings. Design, develop, and implement solutions for system installations, upgrades, repairs, and conversions. Review of Field Site Survey documentation and provide technical assistance with RFI/RFP responses. Create solution design documentation (drawings, BOMs, solution design summaries). Provide technical support for in-office and on-site team members. Support management in the process of creating documentation for implementing new technology with new and existing customers. Maintain familiarity with current and emerging electronic security technologies such as access control, video surveillance, intrusion detection, biometrics, etc. and industry leading vendors. Qualifications A minimum of 3-7 years previous experience in the industry. Associate or bachelor's degree in relevant field preferred or applicable amount of experience in the appropriate field may be substituted for the educational background. Experience in the design and planning of access control and video systems. Professional Electronic Security Certifications or training (Lenel, Genetec, C-Cure. Avigilon, Axis, Bosch, Milestone, etc.) preferred. Other Eligibility Requirements Ability to manage time and multiple tasks without supervision. Organizational skills & detail oriented. Good analytical and problem-solving skills. Excellent presentation, writing skills, verbal, and written customer communication skills. Experience in computer programs such as Microsoft Office, Adobe, etc. preferred. Microsoft Project, Visio, BlueBeam, AutoCAD, or Revit is a plus. Company Overview This is a Security Systems Engineer job opportunity with i2G Systems. Learn more about i2G: *************************************** "Kastle Systems Makes Strategic Investment in i2G Systems, Strengthening Leadership in Serving High-Security Industries and High-Value, Large Scale Facilities" Read More About the Partnership Here: ***********************************************************************************************************************************************************************************

JobID: 8635 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities, and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Assists the Project Engineer with being the technical source of information for the project. Responds to questions about drawings, specifications, shop drawings, and change orders and have responsibility for assisting in writing change orders, RFl's, meeting minutes, and reviewing Submittals. Maintains an effective and professional working relationship with owners, architects, engineers, subcontractors, and suppliers. This position includes three 'steps' (I, II and Senior), which provide for a progression of skill and experience. Step I is the entry level for individuals with a minimum of experience in this position. Step II is used for employees with 2 years of experience in this position, or with experience on larger and more complex projects. The 'Senior' step is used for employees with more than 4 years of experience and/or experience on significantly larger or more complex projects. Key Responsibilities 1. Assists Project Engineer in developing and maintaining as-built drawings and other work tasks and assists with or reviews and processes submittals, change orders, RFl's, and budget forecasting. Ensures the timely and appropriate generation, collection, distribution, storage, retrieval and ultimate disposition of meeting agendas, RFl's and daily reports. 2. Demonstrates an understanding of the project management plan (PMP) and is involved in support and execution of the plan. Demonstrates a thorough understanding of the change management process and performs project scope activities and supports the project team to ensure the work needed to complete the project successfully. 3. Ensures the administration of the project quality management plan and demonstrates and reinforces a culture of safety throughout the project. 4. May assist in the calculation of daily production rates and unit costs for self-performed work. Participates in risk management including identification, analysis, response planning and monitoring and control on a project and demonstrates competency in understanding the environmental control processes for the project and takes corrective actions when necessary. 5. May be responsible for overseeing/managing the BIM (Building Information Modeling) Coordination between Subcontractors and Designers. 6. May be responsible for the documentation and submittal for the LEED (Leadership in Energy and Environmental Design) Certification of a building and for creating and updating Digital Record Drawings (ORD). 7. May provide lines, grades and layout as required for the project while maintaining an organized log book. 8. May provide the following weekly quantities: maintains accurate quantity logs and reports quantities in compliance with the cost control manual. Completed logs are to be filed with the project files. Perform elements of the processes involved in budgeting and controlling costs so that the project can be completed within the approved budget. Demonstrates business acumen within area of responsibility. (Not all Field Engineers track quantities) 9. Provides support to superintendents required for the execution of the work and assists in the resolution of field problems as necessary. Minimum Job Requirements 1. Ability to assume responsibility, interface and communicate with others is essential. 2. Entry-level position that normally requires a four-year construction-related degree or equivalent technical/field experience. 3. Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) proficiency. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Job Description . Job Title: Protection & Control (P&C) Field Testing Engineer Base Salary: $120,000 - $160,000 Industry: Energy - Utilities Our client is seeking multiple Protection & Control (P&C) Field Testing and Commissioning Engineers to support a variety of high-voltage substation projects across transmission, distribution, and generation sectors. This role requires significant travel (up to 80%) and involves field-based testing, commissioning, troubleshooting, and documentation of critical protection systems. Key Responsibilities: Perform comprehensive testing and commissioning of Protection & Control systems in high-voltage substations. Conduct hands-on relay testing using Omicron CMC 256/356, Doble F6150, or equivalent test sets. Test relays such as SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90, GE D60, and similar models. Execute control scheme testing, CT/PT circuit verification, relay calibration, and static/dynamic testing. Collaborate with Project Leads and Field Supervisors on active substation projects. Complete Job Hazard Analyses (JHA) and follow all safety regulations and protocols. Read and interpret electrical drawings, schematics, logic diagrams, and control documentation. Accurately document test data and prepare detailed field reports. Handle administrative tasks including timecards, expenses, and project documentation. RequirementsRequired Experience & Qualifications: 5+ years of electrical field testing experience in substations, including breakers, transformers, and associated systems. Strong proficiency with SEL, GE, Basler, and Beckwith relay platforms. Demonstrated skill in relay testing using Omicron or Doble test equipment. Familiarity with applicable industry standards (NETA, IEEE, NFPA, etc.). Experience working on projects ranging from 15 kV to 500 kV. Ability to utilize test software such as ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, and AcSELerator. BenefitsFull benefits!

Looking for your next big opportunity? We're always building relationships with top talent for this vital role. Apply today-our team is reviewing applications and eager to connect! Why Thompson Thrift? At Thompson Thrift, we don't just build properties; we craft communities and shape futures. Our core values drive us to positively impact our team and the communities we serve through initiatives like TT Serve, which supports community outreach and personal development. We also prioritize work-life balance with our Family Impact Program, offering flexible work options, concierge medical services, financial planning, and more to support your well-being and connections with loved ones. Your Role as a Field Engineer Thompson Thrift is looking for a motivated and detail-driven Field Engineer to be the heartbeat of our on-site operations. In this dynamic role, you'll play a key part in keeping projects on track, on time, and on budget-ensuring everything runs like a well-oiled machine from the ground up. As our go-to person on-site, you'll be involved in every phase of the construction process, coordinating teams, tackling challenges, and supporting smooth execution day in and day out. If you thrive in a fast-paced environment and love being where the action is, this is the opportunity for you. Key Responsibilities: Working closely with the project team to monitor project safety, cost, scheduling, quality control, and punch list completion. Completing, updating, and correctly filing quality control checklists. Assisting with the coordination of material deliveries as directed by site management. Coordinating and take responsibility for the successful completion of specific trades or scopes of work performance from their start of work through final punch. Overseeing and providing day-to-day guidance to subcontractors and their hourly trade employees. Assisting with punch process as directed by site management. Assisting as needed with the daily reporting of subcontractor headcount on the worksite for each of the required construction trades. Ensuring job site safety by policing and assisting with clean-up. Submitting notifications of inadequate cleanup with pictures to responsible subcontractor and ensuring situations are resolved. Taking pictures as needed of construction progress on a daily/weekly basis and saving them in the appropriate job files. Assisting the project team in any capacity directed. Our Ideal Candidate: Education: Bachelor's degree in construction management, civil engineering, or a related field; equivalent experience will be considered. Experience: At least 1 year of construction experience required. Relevant internships or equivalent hands-on experience in construction may also be considered to meet this requirement. Foundational knowledge of construction terminology, processes, and plan reading. Exposure to construction scheduling, cost tracking, and job site safety practices. Proficient with basic computer applications, including Microsoft Office; familiarity with Procore or similar construction software is a plus. Strong communication skills-both written and verbal-with a collaborative, team-oriented mindset. Self-motivated with a proactive attitude, problem-solving skills, and a strong desire to learn and grow within the company. Receptive to feedback and able to follow through on direction to ensure tasks are completed effectively. Required Certifications (must be obtained within 90 days of hire): First Aid/CPR OSHA 30-Hour Construction Safety and Health Training Compensation and Benefits: Total Rewards: We offer competitive base salaries with project bonus potential, subsistence pay, cell phone stipends, auto allowances, merit increases, paid holidays, Paid Time Off, and comprehensive medical, dental, vision, short- and long-term disability benefits, along with a 401(k) plan with a match. Work Environment & Physical Demands This position requires mobility on active construction sites and the ability to lift up to 25 lbs. Tasks may involve exposure to outdoor elements, uneven surfaces, power tools, and loud environments. The team member is required to work in compliance with company safety policies, procedures, and applicable laws.

Take Your Engineering Career to the Next Level! Are you ready to be challenged, make a difference, and experience professional growth in your career? Kleinfelder's Engineering team is looking for you! Kleinfelder provides high-quality solutions to natural gas utilities and pipeline operators. You can be a part of an exciting and diverse group of professionals that are committed to being the best at what they do. Step into Your New Role Kleinfelder's GTS area is looking for Senior Field Integrity Engineers to join our office located in Atlanta, Georgia! Working with Project Managers, the Senior Field Integrity Engineer will establish and organize detailed reports pertaining to gas pipeline system integrity in accordance with Federal Code and associated guidelines. The Senior Field Integrity Engineer coordinates pipeline field activities and data gathering activities associated with investigative digs to achieve project quality, scope, and schedule goals, all while ensuring pipeline safety is top of mind. This is a hybrid work schedule! Consideration for a Senior Field Integrity Engineering position requires the following certifications or experience: Bachelor of Science Degree in Engineering (Civil, Mechanical, Metallurgical, Materials, or Petroleum) or Construction Management 6 - 10 years of relevant experience (6+ years highly preferred) EIT required, PE highly preferred Understanding of Natural Gas Integrity Management and pipeline repair methods Regulatory Knowledge: Strong working knowledge of DOT 49 CFR Part 192, specifically Subpart O (Gas Transmission Pipeline Integrity Management) Standards: Familiarity with ASME B31.8S (Managing System Integrity of Gas Pipelines) and its application to threat management and risk assessment Fundamental understanding of quality philosophies, tools, and professional ethics Knowledge of project scheduling tools, durations, and critical path analysis Proven construction experience in a utility or pipeline environment Effective Communication - Written and Verbal Proficient use of MS Teams, Outlook, Word, Excel, Power Point, and Project Proficient use of Geographic Information Systems (GIS) (preferred) NACE (AMPP) or other industry equivalent credentials (preferred) Advanced analytical and data management skills (preferred) Ability to work independently with minimal supervision Remaining strength calculation proficiency OSHA requirements for excavations Work Area Protection (WAP) requirements for excavations As a Senior Field Integrity Engineer with Kleinfelder, you will be expected to: Review, organize, correct, and help document detailed historical records and data pertaining to gas system integrity to support MAOP Reconfirmation efforts Ensure all data gathering meets Traceable, Verifiable, and Complete (TVC) standards in accordance with federal regulations Exercise project quality assurance programs for field activities, ensuring adherence to 49 CFR 192 and ASME B31.8S Assist in the development of QA programs and evaluation processes to create permanent records that meet regulatory standards Coordinate, and document, pipeline field activities and data gathering associated with investigative digs, Direct Examination (DE), and remediation for regulatory compliance Provide technical assistance and formulate guidance to maintain pipeline safety and regulatory compliance with technical regulations Track projects from concept through completion, providing field performance updates to responsible Project Managers and associated team Ensure project teams are following set processes and established protocols Review project life cycle times for field activities and provide feedback for continuous improvement Assure compliance with Company policies & procedures Collaborate with Construction Management, GIS/Asset Data Services, and System Integrity leaders to produce effective solutions Identify and properly manage project risk, tracking metrics to identify potential scope or schedule deviations Assist in coordinating escalated efforts to remediate discovered asset issues Perform technical analysis to evaluate pipeline condition, root cause analysis, and fitness for service Organize and maintain pipeline data, assessment reports, technical documentation, procedures, and the basis for all TIMP decisions Prepare remediation plans and schedule and identify other pertinent risk reduction measures Identify and track scope changes per the Change Management process (e.g., documented impact analysis and approvals) Attend regular department and project meetings Up to 80% Field Work: Expect significant time in the field conducting inspections and oversight 25% Overnight Travel: Required for remote project sites Flexibility: Available to work occasional night shifts as project requirements dictate Move Forward with Kleinfelder Kleinfelder has been connecting great people to the best work since 1961. We are engineers, scientists, and construction professionals providing solutions that improve our clients' transportation, water, energy, and other private infrastructure. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to doing the right thing, every day, on every project from over 110 offices in the US, Canada, and Australia. Connecting great people to the best work is our purpose - together, we deliver. Progress with an Employer that Values You Kleinfelder is an inclusive organization free from discrimination. We are a stronger organization when we are a diverse workforce and believe that through diversity, equity, and inclusion comes creativity, innovation, and unity. We are proud to offer the following: Benefits: Kleinfelder offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program. Equal Opportunity: Kleinfelder is an Equal Opportunity Employer - Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules) NOTICE TO THIRD PARTY AGENCIES Please note that Kleinfelder does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder. #LI-SF1

Perks & Benefits: At KCF, we are committed to providing best-in-class benefits, engaging development opportunities, and powerful perks that are focused on bringing out the best in you. Full-time benefits include: 100% company-paid Medical, Dental, Vision, Disability, and Life Insurance premiums Health Savings Account with generous employer contributions Flexible work model for most positions, “work from home, work from anywhere” Competitive compensation & bonus opportunities Four weeks Paid Time Off; Paid Holidays + "Flex" Holiday 401(k) with company match Monthly cell phone and internet stipend $500 annual wellness reimbursement Learning culture committed to growth and continuous development Mission & Values: KCF Technologies exists to solve the world's machine health problems to drive safety and sustainability for our communities. We empower industry to eradicate downtime, waste, and injuries with KCF's Machine Health Solutions Platform. Learn more at *************** Curious about what working at KCF is really like? Explore Life at KCF here! If you're an A-player who wants to be part of one of the most important companies revitalizing machine health across the world, KCF is the place for you. If our values resonate with you, please keep reading! Core Values: Smarts: We are humbly aggressive lifelong learners. Grit: We are scrappy, proactive problem solvers who don't stop until the job is done. Drive: We demonstrate an insatiable hunger to serve others. Responsibility: We do the right thing and contribute to the greater good. Autonomy: We own our work and define how we do it, while aligned with the greater mission. Where You Come In Are you a tactful, detail oriented, problem solver? Do you strive to work smarter, more efficiently, and more effectively? Are you able to breakdown complex problems into easy-to-solve tasks? Are you able to explain a complex topic in an easy-to-understand and direct manner? Do you enjoy independence and autonomy? Are you willing to challenge the status quo? If this is you, then we encourage you to consider the Senior Field Engineer opportunity with KCF Technologies. The Senior Field Engineer can be located anywhere within the United States, with our work from home, work from anywhere model. KCF Technologies is seeking a Senior Field Engineer to join our growing field operations team. At KCF Technologies, we embrace our customers problems, seek solutions, and win with them. We transform industry with a comprehensive machine health platform by using our Smarts, Grit, and Drive to solve age-old problems. Work-life balance, autonomy, responsibility, and career fulfillment are some of the key pillars of who we are. This is starting to sound like your next challenge, right? Read on for more info! Travel Requirements: This role requires up to 90% travel, primarily by air or rental car, as our customers are located throughout the United States. Most travel occurs Monday through Friday, though occasionally it may extend into the weekend. In some cases, assignments can be combined into longer trips (up to 10 consecutive days). When this happens, additional time off will be provided afterward to balance your schedule. Travel reimbursement is done via company credit card or personal card following the company's travel & expense policy guidelines. PPE is also covered by the company. Essential Functions: Partner with Project Managers to deliver customized engineering solutions for customers utilizing our advanced technology. Conduct on-site assessments, installations, training, and troubleshooting for KCF's full range of hardware solutions. Collaborate with engineering, sales, and product technology solutions teams to enhance operational efficiency, reliability, and performance of KCF hardware offerings. Design and oversee field experiments, data collection, and trials to validate solutions and gather actionable insights. Lead complex troubleshooting efforts for hardware and software issues, documenting results for feedback to product technology solutions teams. Provide guidance and technical expertise to field technicians and engineers, promoting skill development and knowledge transfer. Prepare detailed reports, documentation, and presentations that summarize findings, recommendations, and project outcomes. Stay up to date with industry trends, emerging technologies, and best practices. Represent the company as a subject matter expert at client meetings and industry events. Collaborate with the Project Management and Product Technology Solutions teams to assist in new product rollouts, creating field procedures for the PiezoSensing module and other product lines. Lead or participate in high-impact corporate initiatives, including large-scale hardware assessments and system calibrations. Identify and drive optimization projects tailored to customer needs and operational efficiency enhancements. Ensure compliance with all Field Service and Safety Forms and processes. Complete complex Engineering Design work as assigned in conjunction with the Project Manager. Assist in the installation of Advanced Hardware Solutions as well as data validation and accelerometer audits. Participate in scheduled field services as directed by the Field Operations Manager or Coordinator. Complete all required safety training and comply with service and safety protocols during on-site work. Mentor assigned junior staff, advancing their technical knowledge and soft skills. Complete all required KCF Academy training within specified time frames. Advance expertise in specialized fields to improve operational processes and customer satisfaction. Other duties as assigned by the supervisor and other KCF leadership staff. Qualifications: GED required; bachelor's degree in engineering, trades program or equivalent experience including any of the following; Vibration Analysis (Route Based) Experience, Millwright Experience, Electrician Experience, Controls Technician or Engineer (PLC) Experience. Military Communications or Maintenance Experience; Airforce AFSC 3D_series, Navy - ET, IT series, Nuclear Power Program, Marines MOS 06XX series, Army 25 & 17 series, Airforce AFSCs - 2A_series, Navy - AD, AE, AMT, AT, EM series, Marines MOS 60 _series or 67_series, Army MOS91 series and 94 series. 5+ years relevant experience. Experience in any of the following is preferred, but not required: vibration analysis, radio frequency, programmable logic controller, automation, and manufacturing/industrial plants. Able, willing, and excited to visit and maneuver through large industrial plants Ability to travel 90% of the time Ability to travel internationally 20% of the time A valid U.S. passport is required; KCF will financially support hire through process if needed. Excellent verbal, in-person, and digital communication, capable of articulating complex information clearly and effectively to both technical and non-technical audiences Strong orientation towards customer service, able to manage client relationships effectively, and handle concerns with empathy and professionalism Ability to solve problems, through proactive identification and effective troubleshooting under pressure Positive demeanor, showing resilience and optimism in challenging situations. Attention to detail in technical tasks, such as sensor placement and system configuration, ensuring the reliability and effectiveness of our monitoring systems Familiarity with emerging technologies, especially in sensor-based modules like PiezoSensing. Proven ability to lead and mentor junior staff. Minimum Physical Expectations: Ability to walk, stand, and sit for long periods of time Ability to climb stairs and ladders, bending, and occasional lifting of material up to 20 pounds The industrial setting will result in exposure to hot and cold temperatures, noise, fumes, limited dust, and chemical agents. Visual and auditory ability to respond to critical situations and physical ability to act swiftly in an emergency At KCF Technologies, we are an Equal Opportunity Employer. The only things we require for employment, compensation, advancement and benefits are performance and a good team attitude. No one will be denied opportunities or benefits, and no employment decisions will be made, on the basis of race, religion/creed, national origin, ancestry, sex, sexual orientation, gender, gender identity, age, disability that does not prohibit performance of essential job functions, protected veteran status, medical condition, marital status, pregnancy, genetic information, possession of a general education development certificate (“GED”) as compared to a high school diploma, or any other characteristic protected by applicable federal or state laws. KCF complies with applicable state and local laws governing nondiscrimination in employment in every location in which KCF has facilities.

About the Role We are seeking experienced Protection & Control (P&C) Field Testing and Commissioning Engineers to join our clients team. This role supports high-voltage substation projects across transmission, distribution, and generation environments. It is a travel-intensive field position requiring hands-on expertise in testing, commissioning, troubleshooting, and documenting critical protection systems. Key Responsibilities Perform testing and commissioning of P&C systems in high-voltage substations Conduct protective relay testing using Omicron CMC 256/356 or Doble F6150 equipment Test relays such as SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90, GE D60, and related models Execute control scheme testing, CT/PT circuit verification, relay calibration, and static/dynamic testing Collaborate with Project Leads and Field Supervisors on active assignments Complete Job Hazard Analysis (JHA) and ensure compliance with all safety protocols Interpret electrical drawings, schematics, and logic diagrams accurately Record test data and prepare detailed field reports Handle administrative tasks including timecards, expenses, and project documentation Qualifications & Experience Minimum 5 years of electrical field testing experience in substations (breakers, transformers, and related systems) Strong proficiency with SEL, GE, Basler, and Beckwith relay families Skilled in relay testing using Omicron or Doble test sets Familiarity with NETA, IEEE, NFPA, and other industry standards Hands-on experience across voltage ranges from 15 kV to 500 kV Proficiency with testing software such as ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator

Our Client is an industry- leading commercial Concrete Contractor in the Southeast specializing in delivering quality cast-in-place concrete work in the Multi-Family, Mixed-Use, Higher Ed, Healthcare, Datacenter, Retail, Manufacturing, and Distribution markets. Based on current and projected success in the region, they are seeking a Lead Field Engineer to layout commercial building projects throughout the Atlanta, GA area. This is a great opportunity to be part of the growth of a strong industry leader. Requirements: - Minimum of 2-4 years' experience working on commercial concrete construction projects ranging in size from $500,000 to $30M - Previous Line and Grade / Layout experience required - Use of a Total-Station for building layout required (Robotic preferred) - Client driven and Detail oriented - Reliable and Team Player Benefits: - Competitive Salary - Healthcare / Dental Insurance - Vehicle Allowance and/or Fuel Card - Company Laptop with AutoCAD - Company Phone - 401k with Company Match - Profit Sharing About Fusion: Fusion HCR is an Executive Recruiting and Talent Consulting firm specialized in Commercial Construction. Our Principal leadership team is comprised of dedicated professionals experienced with leading Talent organizations of large multi-national corporations and professional search firms. Fusion takes pride on staying ahead of the industry and differentiating our services to provide innovative offerings to meet the ever-changing needs of our client organizations. You can learn more about Fusion HCR by visiting our website ******************

Job DescriptionSalary: $45-70k per year About Us: Century Solutions Group, Inc., an IT services provider based in Tyrone, GA, with an additional office in Atlanta (near the Battery), is dedicated to helping clients succeed by delivering customized technology solutions tailored to their unique needs. Century offers a dynamic and rewarding environment where team members are empowered to learn, grow, and make a meaningful impact. ***We are looking for someone to work on the southside of ATL ONLY*** Job Summary: Century Solutions Group is seeking IT Field Engineer (Levels IIII) to deliver proactive, high-quality support to our clients. In this role, you will act as a trusted technical partnerdiagnosing and resolving issues onsite and remotely, stabilizing and improving client environments, and documenting solutions that the whole team can leverage. Youll work across desktops, laptops, peripherals, servers, and common business applications; coordinate with teammates and vendors; and help translate business needs into practical, secure IT solutions. Key Responsibilities: Deliver onsite/remote support for endpoints, peripherals, servers, and common business apps; ensure stable day-to-day operations. Install, configure, diagnose, repair, maintain, and upgrade hardware/software to optimize performance; perform malware/spyware cleanup. Own tickets end-to-end: triage, prioritize to SLA, resolve or escalate appropriately, and keep users informed. Apply system analysis to define hardware/software/functional requirements and recommend practical solutions. Provide clear user training and create quick reference guides to reduce repeat issues. Create and update documentation Help coordinate the service board workflow (priorities, escalations) and uphold documentation/quality standards. Collaborate with internal teams and vendors to drive timely, durable fixes. Participate in after-hours/on-call monitoring and support as scheduled. Maintain current skills/certifications, share knowledge with the team, and follow security/safety best practices. Perform other duties as assigned to support client outcomes and team effectiveness. Qualifications/Skills: Bachelors degree in computer science (or related field) or 34 years of equivalent, hands-on IT experience. Networking Expertise: Demonstrated knowledge of firewalls, switches, and wireless technologies (configuration, troubleshooting, and support). Execution Under Pressure: Proven ability to prioritize and execute tasks in a high-pressure, SLA-driven Shift Hours: Monday to Friday, 8:00 AM to 5:30 PM. Benefits: Competitive salary Comprehensive health, dental, and vision insurance Professional development and training opportunities PTO and holiday schedule 401(k) with company Why Join Us? At Century Solutions Group, we value innovation, collaboration, and a commitment to excellence. As an IT Field Engineer, you will play a critical role in driving our sales efforts and shaping the future of our client relationships. Join us to be part of a team that is passionate about technology and dedicated to client satisfaction.

Job Description Field IT Engineer Onsite | Atlanta, GA We are looking for a talented IT professional to join our leading digital banking client's team, supporting day-to-day IT operations across local, regional, and global business and IT functions. This role is ideal for someone who thrives in a dynamic, fast-paced environment and is ready to make an impact with cutting-edge technology and a forward-thinking organization. Key Responsibilities: Provide hands-on IT support, including LAN/WAN network, telephony, and printer support. Support PCs, laptops, desktops, and high-end engineering workstations, including staging, restore, and recovery. Manage global information security efforts, including virus protection, backups, recovery, and audits. Resolve help desk incidents within service level agreements, tracking and resolving IT issues with global teams. Support end users and senior management in both office and remote hybrid environments. Lead IT projects related to real estate, network installations, and maintenance of communication and AV equipment. Oversee IT asset inventory, stocktakes, and audits, ensuring smooth vendor support and procurement processes. Actively participate in IT planning, program execution, and business continuity planning. Manage site computer rooms and coordinate disaster recovery efforts. Lead IT upgrades, new implementations, refresh programs, and expansions driven by corporate real estate activities. Communicate and collaborate effectively with global, regional, and site-based teams, solution partners, and management. Provide expert support for hardware troubleshooting, repairs, and part replacements. Key Competencies: Proficient in IT infrastructure and executive office support. Strong ability to support key executive events, such as management meetings. Self-motivated, detail-oriented, and quick to learn, with the ability to innovate and adapt in a fast-changing environment. Effective communication skills at all levels of management. Ability to manage multiple sites and support global IT needs. Flexibility in working hours to accommodate project timelines and office hours. High degree of autonomy, service orientation, and a results-driven approach. Strong understanding of IT development and support processes, with a focus on ethics and compliance. Qualifications: Bachelor's degree or relevant certification in IT, Computer Engineering, Electronics, or related discipline. Experience with Microsoft Windows 11 and server/Dell PC client support. Familiarity with CISCO switches, routers, networks, and telephony systems. Expertise in implementing structured cabling and network layouts. Experience managing complex support issues within a globally dispersed organization. Knowledge of global wired and wireless network technologies, DNS/DHCP, WAN, and LAN technologies. At least 3-5 years of relevant experience in LAN/WAN and technical support. Why Join Us? This is an exciting opportunity to work with a leading digital banking client that is shaping the future of financial services. You'll be part of a dynamic team that embraces innovation and values your expertise. Join us to help drive meaningful change while advancing your career in a supportive, growth-oriented environment.