Interior designer jobs in Simpsonville, SC - 64 jobs

The purpose of this position is to provide essential technical knowledge and perform design work as described below. This position serves as an Area Lead Designer or staff designer performing assignments of advanced complexity. Under general supervision of the Discipline Lead Engineer or Design Supervisor, serve as an Area Lead Designer providing guidance and supervision to designers Prepare and check designs of advanced complexity utilizing 3D modeling and 2D computer aided drafting and design automation tools Coordinate technical issues with other disciplines, project management, vendors and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost and schedule baselines Perform bulk material take-off analysis and tabulations Provide technical support to activities associated with equipment and material procurement and subcontracting including review of vendor submittals Provide technical support to activities associated with construction administration including response to construction requests for information and field changes Other duties as assigned Basic Job Requirements U.S. Citizenship required Associate degree in related technical field of study and minimum fifteen years of work related experience Working knowledge of applicable federal including Department of Energy orders state and local codes and standards Ability to communicate effectively with audiences that include but are not limited to project management coworkers clients vendors and subcontractors Job related technical knowledge necessary to complete the job Advanced knowledge of discipline codes and standards Ability to perform work in compliance with applicable local state and federal codes statutes and guidelines Ability to attend to detail and work in a time conscious and time effective manner Intermediate computer and software skills to include proficiency in the use of word processing e-mail spreadsheet and electronic presentation programs Significant experience providing engineering procurement and construction services on large industrial projects Proficiency executing large engineering projects utilizing 3D modeling and 2D CADD automation tools in a multi discipline environment Discipline Specific Job Requirements Read interpret and generate design drawings with minimal input from a member of the engineering staff Prepare 3D layouts and or schematics for conceptual and detailed designs of advanced complexity Background and experience must include drafting and designer experience in engineering fields such as piping electrical mechanical structural communications architectural fire protection or civil Proficiency in computer aided design utilizing Bentley MicroStation with demonstrated experience to originate and produce drawings with minimum supervision required Proficiency in 3D modeling using Intergraph Smart3D with minimum 3 years of experience Produce and check complex piping drawings including plot plans piping plans isometrics and sketches Provide assistance to construction and pipe fabrication personnel Preferred Qualifications Experience with design of systems structures and components for nuclear facilities under the requirements of ASME NQA-1 Knowledge of commercial availability and cost of materials Practical field experience EPC project experience for the following industries U.S Department of Energy or other U.S. Federal Government Agency Nuclear facilities under a nuclear quality assurance program Manufacturing pharmaceutical or biotechnology Knowledge of piping components commercial availability and cost of materials Working knowledge of and ability to interpret Piping and Instrumentation Diagram other discipline drawings and vendor equipment documentation Advanced knowledge of Intergraph SmartPlant Review software Advanced knowledge of piping design requirements including equipment arrangement piping layout stress requirements and material requirements Working knowledge of and ability to interpret Piping and Instrumentation Diagram update master P and ID and pipe line list About our Company DataSoft Technologies is a highly recognized provider of professional IT Consulting services in the US. Founded in 1994, DataSoft Technologies, Inc. provides staff augmentation services for Information Technology and Automotive Services. Our team member benefits include: Paid Holidays/Paid Time Off (PTO) Medical/Dental Insurance Vision Insurance Short Term/Long Term Disability Life Insurance 401 (K)

At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. Fluor is a leading government contractor with a proven track record of delivering high‑value technical solutions around the world to U.S. government agencies such as the DOE, NNSA, the Department of Defense and the Intelligence Community. **Job Description** Operating under detailed instructions and review the purpose of this position is to provide the essential technical knowledge and perform the work listed. This role has the responsibility to promote Fluor's competitiveness within the global marketplace by delivering quality services of unmatched value and technical competence. The purpose of this position is to work on design and perform 3D layout of complex scope and may serve as Design Area Lead. - Conduct review of model using 3D review platform and create 3D models of moderate to advanced complexity - Apply project drawing standards to design drawings and 3D layout - Prepare 2D Computer Aided Design (CAD) drawings of advanced complexity - Review drawings and vendor equipment documentation of advanced complexity within the discipline and from other disciplines for compliance with project requirements, and actively seek discrepancy resolution - Perform bulk material take-off analysis and tabulations - Adhere to industry codes and standards as well as department practices and procedures - Other duties as assigned **Basic Job Requirements** - Accredited two (2) year degree or global equivalent in technical field of study, or; A combination of education and directly related experience equal to fifteen (15) years*; some locations may have additional or different qualifications in order to comply with local requirements - Ability to communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors, and visitors - Job related technical knowledge necessary to complete the job - Ability to learn and apply knowledge of applicable local, state/province, and federal/national statutes and guidelines - Ability to attend to detail and work in a time-conscious and time-effective manner - Knowledge of commercial availability and cost of materials - Practical field experience - Intermediate computer and software skills to include the use of word processing, e-mail, spreadsheet and electronic presentation programs **Other Job Requirements** + Must be able to provide proof of U.S. citizenship **Preferred Qualifications** We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Benefits Statement: Fluor is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental and vision plans, EAP, disability coverage, life insurance, AD&D, voluntary benefit plans, 401(k) with a company match, paid time off (personal, bereavement, sick, holidays) for salaried employees, paid sick leave per state requirement for craft employees, parental leave, and training and development courses. Market Rate Statement: The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate's qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role. Notice to Candidates: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references, passport verifications and Global Watchlist screening. To be Considered Candidates: Must be authorized to work in the country where the position is located. Salary Range: $92,500.00 - $171,500.00

The purpose of this position is to provide essential technical knowledge and perform design work as described below. This position serves as an Area Lead Designer or staff designer performing assignments of advanced complexity. Under general supervision of the Discipline Lead Engineer or Design Supervisor, serve as an Area Lead Designer providing guidance/supervision to designers Prepare and check designs of advanced complexity utilizing 3D modeling and 2D computer- aided drafting and design (CADD) automation tools Coordinate technical issues with other disciplines, project management, vendors and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost and schedule baselines Perform bulk material take-off analysis and tabulations Provide technical support to activities associated with equipment and material procurement and subcontracting including review of vendor submittals Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes EDUCATION REQUIREMENTS Associate degree in related technical field of study and minimum fifteen (15) years of work- related experience MINIMUM QUALIFICATIONS Candidate must be a U.S. Citizen. Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards. Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors. Job related technical knowledge necessary to complete the job. Advanced knowledge of discipline codes and standards. Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines. Ability to attend to detail and work in a time-conscious and time-effective manner. Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs. Significant experience providing engineering, procurement and construction (EPC) services on large industrial projects. Proficiency executing large engineering projects utilizing 3D modeling and 2D CADD automation tools in a multi-discipline environment. Background and experience must include drafting/ designer experience in engineering fields, such as electrical, instrumentation and control or communications. Proficiency in computer aided design (Bentley MicroStation) with demonstrated experience to originate and produce drawings with minimum supervision required. Proficiency in 3D modeling using Intergraph Smart3D (S3D). Ability to walk down field systems with minimal guidance, interpret field direction, generate minor design details, create new drawings, modify existing drawings, and direct junior drafters. Perform advanced design calculations (lighting, raceway sizing and wire sizing, voltage drop, cable pulling, panel board and breaker sizing, and junction box sizing). Ability to work in a diverse work environment. Satisfactory results of a pre-employment screening, which includes a background check and drug screening. Desired Qualifications Knowledge of commercial availability and cost of materials Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1 Practical field experience EPC project experience for the following industries: U.S Department of Energy or other U.S. Federal Government Agency Nuclear facilities under a nuclear quality assurance program Manufacturing, pharmaceutical or biotechnology Advanced knowledge of: Intergraph SmartPlant Electrical software Intergraph SmartPlant Review software Electrical design requirements (grounding/earthing, lighting, wiring, motors, conduit fill and sizing, panelboards, and hazardous locations) LOCATION Position will be 100% onsite in Greenville, SC. (Local candidates or willing to relocate at the candidate's expense). PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management's assignment of essential functions and the descriptions listed do not restrict management's right to assign or reassign duties and responsibilities to this job at any time. CONTRACT DURATIONOne (1) year with the possibility of extension/conversion.

Piping Principal Designer The purpose of this position is to provide essential technical knowledge and perform design work as described below. This position serves as an Area Lead Designer or staff designer performing assignments of advanced complexity. Under general supervision of the Discipline Lead Engineer or Design Supervisor, serve as an Area Lead Designer providing guidance/supervision to designers Prepare and check designs of advanced complexity utilizing 3D modeling and 2D computer-aided drafting and design (CADD) automation tools Coordinate technical issues with other disciplines, project management, vendors and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost and schedule baselines Perform bulk material take-off analysis and tabulations Provide technical support to activities associated with equipment and material procurement and subcontracting including review of vendor submittals Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes Other duties as assigned Basic Job Requirements U.S. Citizenship required Associate degree in related technical field of study and minimum fifteen (15) years of work-related experience Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors Job related technical knowledge necessary to complete the job Advanced knowledge of discipline codes and standards Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines Ability to attend to detail and work in a time-conscious and time-effective manner Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs Significant experience providing engineering, procurement and construction (EPC) services on large industrial projects Proficiency executing large engineering projects utilizing 3D modeling and 2D CADD automation tools in a multi-discipline environment Discipline Specific Job Requirements Read, interpret, and generate design drawings with minimal input from a member of the engineering staff Prepare 3D layouts and/or schematics for conceptual and detailed designs of advanced complexity Background and experience must include drafting/designer experience in engineering fields, such as piping, electrical, mechanical, structural, communications, architectural, fire protection or civil Proficiency in computer aided design utilizing Bentley MicroStation with demonstrated experience to originate and produce drawings with minimum supervision required Proficiency in 3D modeling using Intergraph Smart3D (S3D) with minimum 3 years of experience Produce and check complex piping drawings including plot plans, piping plans, isometrics and sketches Provide assistance to construction and pipe fabrication personnel Preferred Qualifications Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1 Knowledge of commercial availability and cost of materials Practical field experience EPC project experience for the following industries: U.S Department of Energy or other U.S. Federal Government Agency Nuclear facilities under a nuclear quality assurance program Manufacturing, pharmaceutical or biotechnology Knowledge of piping components, commercial availability and cost of materials Working knowledge of and ability to interpret Piping and Instrumentation Diagram (P&ID), other discipline drawings and vendor equipment documentation Advanced knowledge of: Intergraph SmartPlant Review software Piping design requirements (equipment arrangement, piping layout, stress requirements, and material requirements) Working knowledge of and ability to interpret Piping and Instrumentation Diagram (P&ID), update master P&ID and pipe line list ___________________________________________________________________________________________________________________________________________________________ 💼 Why Join iParametrics? At iParametrics, we deliver mission-critical solutions that impact national security, infrastructure, and emergency management. Our work spans all 50 states, U.S. territories, and 39 countries, supporting federal and private sector clients for over 20 years. 📢 Perks & Benefits: 🏥 Medical, dental, and vision coverage 💰 401(k) with company match 📆 Paid time off & holidays 📈 Competitive salary (bi-weekly pay, DOE) iParametrics delivers a variety of mission-critical management and support services for construction, emergency management, homeland security, risk management, and other programs to commercial and public sector clients. We were founded in 2003 and are based in metro Atlanta, Georgia, with staff and project offices nationwide. For over 20 years, we have provided guidance and expertise to help our clients confidently navigate the most challenging and complex issues relating to the safety and security of their people, assets, and operations. This includes technical and programmatic support of complex critical infrastructure programs in 39 countries, all 50 states, and 3 US Territories. iParametrics is an Equal Opportunity Employer. We are committed to a work environment that supports and respects all individuals without discrimination based on race, color, religion, national origin, age, sex, pregnancy, marital status, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Application review will consider without limitation the following criteria: qualifications, education, and experience specific to the /duties as well as prior experience with leading construction companies. Applicants must be able to pass the iParametrics Drug and Alcohol test. This job description is intended to outline the general nature and level of work that would be performed by project team members. It is not designed to cover or contain a comprehensive list of all responsibilities, duties, or skills required for this job. This description is subject to change at the discretion of the company, with or without notice.

This position will offer you the opportunity to work in a project team environment and lead other engineers and designers using your knowledge of engineering and design practices to: + Prepare/Review construction sketches and work packages for: + Overhead and underground distribution facilities (4 KV through 38 KV) + Pole loading analyses + Voltage drop and flicker calculations + Cable pulling + Bill of material + Cost estimates + Joint use coordination + Traffic control plans and/or permit drawings + Support preliminary project scoping. + Perform field work, when necessary. + Support maintenance and recapitalization of distribution components. + Plan modifications to the system as well as designing and overseeing complex tasks. + Provide construction support, when necessary. + Conduct client communication and interaction, when necessary. Qualifications We do not sponsor employees for work authorization in the U.S. for this position. Essential skills and experience: + This position requires an Associate's degree in a design-related degree, or a 4 year non-engineering degree. + 6 or more years of experience with electric utility distribution or relevant experience to be able to review work by others. + Knowledgeable in physical distribution design methods and their application. + Knowledgeable in applicable codes, standards, and distribution software programs including AutoCAD, ArcGIS, PoleForeman, etc. + Familiarity with design codes and standards such as NESC, NEC, ANSI, IEEE, GIS/GWD. + Experience with complex overhead and underground distribution projects (120/208V through 38 kV). + Strong communication skills. + Able to lead a project team. Valued but not required skills and experience: + Experience in utility distribution inspections and/or construction. + Familiarity with various distribution design/analysis software. + Familiarity with GIS software. Award-Winning Benefits At Sargent & Lundy, we care about the health and well-being of our employees. Our commitment extends beyond the workplace, offering comprehensive healthcare plans and generous paid time off to support our team members in every aspect of their lives. We understand the importance of work-life balance, which is why we are proud to provide competitive, award-winning benefits. Our dedication to employee satisfaction has earned us the prestigious Top Workplaces Culture Excellence Award for compensation and benefits in 2022, 2023, and 2024. Health & Wellness Financial Benefits Work-Life Balance + Health Plans: Medical, Dental, Vision + Life & Accident Insurance + Disability Coverage + Employee Assistance Program (EAP) + Back-Up Daycare + FSA & HSA + 401(k) + Pre-Tax Commuter Account + Merit Scholarship Program + Employee Discount Program + Corporate Charitable Giving Program + Tuition Assistance + First Professional Licensure Bonus + Employee Referral Bonus + Paid Annual Personal/Sick Time (PST) + Paid Vacation + Paid Holidays + Paid Parental Leave + Paid Bereavement Leave + Flexible Work Arrangements Compensation Range $63,480.00 - $99,080.00 Transparency Statement Sargent & Lundy discloses compensation ranges that comply with all local and state regulations. The total compensation package for eligible positions will include a base salary or an hourly rate and a comprehensive benefits package, reflecting our commitment to rewarding performance and supporting the overall well-being of our employees. Individuals may also be eligible to participate in our yearly discretionary bonus. Awards & Recognition Equal Opportunity Sargent & Lundy is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any protected status as defined by applicable law. CityGreenville StateSC CountryUnited States Area of InterestDesign and Drafting TypeFull Time - Regular Job ID2025-20475 Business GroupGrid Group DepartmentDistribution Design

As a member of Garver's growing Water Design Center in Greenville, SC, the Building Information Modeling (BIM) Designer will be responsible for developing and detailing Revit 3D models for Garver's Water Design Center. The BIM Technician will collaborate with engineers, designers, and BIM technicians to produce drawings and manage workload on various Water Business Line projects. This role in the Water Design Center is one that is central to project delivery through our many offices and utilizes the latest BIM technology, predominantly Revit software. Typical projects in design include process mechanical, structural, building mechanical, and architectural designs for water and wastewater treatment plants. Primary responsibilities of the BIM Designer will include: Developing 3D BIM Revit models with a great deal of autonomy Processing point cloud data, creating plans, sections, and details in Revit software, producing construction drawings Working as team player with a group of technicians and designers of various levels and disciplines (process, structural, mechanical, and electrical) along with Project Leaders and design teams to execute projects and developed detailed design drawings. Arranging necessary resources for file sharing and communication to effectively share design files across the company or with clients, sub consultants, and contractors; Maintaining strong communication with engineers and project managers to ensure timely delivery of projects and avoid any potential project conflicts Quality program compliance, including QA/QC to ensure all projects adhere to company standards Due to the collaborative nature of coordination using BIM tools, candidates must have the ability to seek out and resolve issues through close interaction with other project team members. In addition, the candidate must be able to maintain a positive team attitude and interpersonal effectiveness to foster and maintain an efficient and productive BIM team. About Garver's Greenville Water Design Center: The Greenville Water Design Center will be a knowledge-based hub that excels in highly technical, multi-discipline water and wastewater designs for clients in Garver's eastern footprint, as well as across the country as necessary. The Greenville WDC will specialize in large, high-volume, custom treatment plant projects with conventional and advanced technologies. A centralized WDC requires constant communication, coordination, and participation with team members. This integral working relationship benefits the client through project delivery schedule and design quality, as well as the engineer's opportunity for team collaboration and professional growth. Requirements: 3+ years of computer aided drafting and design experience with an architectural and/or engineering design team High school diploma or equivalent 3+ years' experience in the use of BIM software (Revit) Experience using MSOffice products, including Excel, Outlook, and Word General understanding of various building types Experience with multi-discipline CAD designs (i.e. piping, structural, electrical, I&C, controls, mechanical, HVAC, process) Experience with water/wastewater. architectural, industrial, or commercial designs Preferred Skills: Understanding of water or wastewater treatment specific equipment Experience using Bluebeam software Experience with file sharing protocols and other methods of file transfer Good communication and training skills (verbal and written) Associate degree or higher with a focus on CAD/BIM Experience with point clouds and point cloud processing with ReCap Experience with BIM360 file sharing software Grow With Us Garver offers its employees programs such as company-paid professional memberships, company support for industry licenses and continuing education opportunities that foster a progressive atmosphere. Garver provides the tools, resources, and environment to develop leaders, stimulate ideas, and accomplish projects. By offering highly competitive salary packages, attractive benefits, and a comprehensive wellness program; Garver walks the talk when it comes to work-life balance. Founded in 1919, Garver is an employee-owned engineering, planning, and environmental services firm focused on aviation, transportation, buildings, federal, water and wastewater services; surveying; advisory services; and construction engineering and inspection. In the top 100 of Engineering News-Record's Top 500 Design Firms list, with more than 1,400 employees, Garver provides an exceptional level of client service that reflects our people-first culture, which has achieved Zweig Group Best Firm to Work For Legacy Status. Learn how Garver invests in people and places they call home at GarverUSA.com. Garver is committed to providing equal employment opportunities to all applicants and employees. Our employment practices are based upon an individual's capabilities and qualifications without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other category protected by law. #LI-ED1

Benefits: Employee discounts Free uniforms Benefits/Perks: Commission-Based Pay Paid Training Bonus Opportunities Uniforms Provided Up Closets, a leading provider of custom closet solutions is seeking a skilled closet designer/consultant to join our team. We are looking for someone passionate about creating functional and beautiful spaces that meet each client's unique needs. Requirements: Minimum of 2 years of experience in closet design or a related field (preferred) Proficiency in technology and ability to understand software Excellent communication and interpersonal skills Strong organizational and time-management skills Valid driver's license and reliable transportation Ability to work independently and as part of a team Detail-oriented with a focus on quality and customer satisfaction Qualifications: Knowledge of construction materials and techniques Experience in sales or customer service is a plus Responsibilities: Meet with clients to understand their storage needs and preferences Design custom closet systems using our software Provide estimates and proposals for custom closet systems Collaborate with the installation team to ensure accurate and efficient installation Ensure high-quality workmanship and attention to detail Provide exceptional customer service and communication throughout the design and installation process Maintain a safe and organized work environment Follow company policies and procedures related to design and customer service Compensation: $30,000.00 - $80,000.00 per year At Up Closets, we are more than just a custom closet design company - we are a tight-knit family of creative visionaries, builders, and dreamers who are passionate about transforming spaces and careers. Our story is one of innovation, growth, and commitment to excellence, and we're looking for exceptional individuals to join our team and be part of our exciting journey. If you're looking for more than just a job - if you want a fulfilling career that allows you to express your creativity and make a meaningful impact - then Up Closets is the place for you. We invite you to explore our career opportunities and become part of our dynamic team of closet space creators. Together, we'll shape the future of custom closet design. Welcome to Up Closets - where your career can truly reach new heights. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Up Closet.

Kitchen Designers at The Home Depot help customers turn their kitchen and bath dreams into reality. Kitchen Designers greet and engage customers, listen to their needs, and guide them through the design process-offering "good, better, best" options, samples to take home, and expert advice on products, services, and installation. Kitchen Designers use design tools and showroom resources to educate customers, set clear expectations, and provide tailored solutions for every project, whether they're DIYers or working with professionals. Kitchen Designers advocate for customers by highlighting current promotions, financing options, and the advantages of choosing Home Depot over competitors. Kitchen Designers also ensure the showroom is clean, organized, and well-stocked, creating a welcoming and safe shopping environment. Throughout each project, Kitchen Designers follow up on project statuses, address questions, and guide customers every step of the way. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job DescriptionDescription: The EWP Design Assistant supports the design team by preparing layouts, performing takeoffs, and assisting with the preparation of engineered wood product (EWP) drawings and material lists. This role works closely with designers, sales, and production teams to ensure accurate designs that meet structural requirements and customer specifications. Key Responsibilities Assist designers in preparing floor and roof layouts using specialized EWP design software. Perform material take-offs and assist with pricing and quoting packages. Review architectural and structural plans to ensure design accuracy. Generate preliminary layouts and shop drawings under the supervision of the design team. Prepare and maintain organized job files, drawings, and supporting documents. Communicate with sales representatives, builders, and contractors to clarify design details when needed. Assist in resolving design or field issues in collaboration with the design team. Support production with accurate cut lists and layout instructions. Ensure all designs comply with building codes, structural standards, and company guidelines. Provide general administrative and technical support to the EWP design department. Requirements: Qualifications High school diploma or equivalent required; associate's degree or coursework in drafting, engineering, or construction technology preferred. Basic knowledge of construction, structural components, and building materials. Familiarity with CAD or EWP design software (e.g., MiTek, BC Framer, or similar) is a plus. Strong math and analytical skills. Ability to read and interpret blueprints and construction documents. Detail-oriented with strong organizational skills. Good communication skills and ability to work in a team environment. Proficiency in Microsoft Office (Excel, Word, Outlook). Physical Requirements Ability to remain in a seated position using a computer for extended periods. Occasional lifting of up to 25 lbs. (job files, plans, etc.).

CIVIL DESIGN INTERN Thomas & Hutton is a growing, well-established civil engineering firm providing consulting services throughout the southeast. We are an award-winning company that has been recognized as one of the best places to work in Georgia and South Carolina. Some of our many services include Civil, Environmental, Structural and Marine Engineering; Land Surveying; Land Planning; Landscape Architecture; Geographic Information Systems and Construction Administration. Thomas & Hutton is seeking enthusiastic and driven candidates for Summer Internships in our Civil Site Design Department. Candidates must be in either their sophomore, junior, or senior year in pursuit of a civil engineering degree at an ABET accredited program. Previous internship experience with a civil design firm as well as knowledge of AutoCAD Civil 3D a plus. Strong written and verbal communication skills required. Thomas & Hutton's Interns will gain exposure to a wide range of technical and field opportunities by supporting project teams on various tasks. Interns learn business use of AutoCAD Civil 3D, and will assist in preparing site design plans. Paid 40 hour per week internships begin in May 2026 and end in August 2026. Relocation and Housing are not provided. Please note, this is not a structural internship. Please note, sponsorship is not available for this position. Thomas & Hutton is a Drug-Free Workplace & E-Verify Participant Thomas & Hutton's Mission Statement, “Relationships and Solutions for Success” describes not only our unwavering commitment to clients but also our commitment to the success, both professionally and personally, of our employees. Thomas & Hutton was named to the Best Places to Work in South Carolina and Georgia by SCBIZ and Georgia Trend, and named One of the best Civil Engineering firms to work for by CE News/Zweig White. What makes Thomas & Hutton a great place to work? Opportunities for professional development, strong benefits and compensation packages, a commitment to make our communities better for future generations, a family-oriented culture, and our reputation as a firm with extremely knowledgeable professionals who serve as trusted advisors to our clients. Visit *********************** to learn more. We are an equal opportunity employer. Qualified minorities, women, veterans and individuals with disabilities are encouraged to apply. If you want to view the EEO is the Law poster, please choose your language: English - Spanish - Arabic - Chinese

Founded in 1972, GBS operates locations in North and South Carolina, including its custom millwork division, distributing specialty building products to customers in the Carolinas and parts of Georgia. . The Designer Salary designs and completes layouts of commercial and complex residential roof and floor systems for pricing and manufacturing. The position requires complete independent judgment and oversight of structural and architectural design. What you will do Designs commercial and complex residential roof and floor systems and produces layout. Discusses changes and corrections with engineers, architects and contractors prior to and during construction. Presents, sells and follows-up on new jobs. Prepares roof truss and truss joist layouts. Coordinates, sells and does follow-ups of new jobs. Performs job-site inspections. Produces materials list. Determines special notes to append contracts. Resolves architectural and design discrepancies. Maintains computer system and performs routine upgrades to insure accurate and current application. Assists in the shipping department. Required For All Jobs Perform other duties as assigned. Comply with all policies and standards. Adhere to Company's commitment to workplace safety. Participate in and complete assigned trainings. Education Qualifications Associate's Degree in civil, architectural or design related field required. Bachelor's Degree preferred. Applicable work experience may be substituted for education requirement. Experience Qualifications 3 years of drafting experience in a construction or building materials-related industry required. Skills and Abilities Proficient technical writing skills. Excellent salesmanship and communication skills. Special knowledge required-Reading and interpreting blueprints in an architectural related industry. Other-PC Literate with Microsoft Office products, AUTO CAD, and other design programs that facilitate learning in-house program with ease. . GBS Building Supply , a Division of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

The Opportunity Our retail expansion in main markets starts with hiring the best leaders and a stellar team. As a Junior Design Consultant, you will be responsible for elevating our guest experience with an emphasis on nurturing the growth of our complimentary design service. Your partnership with other Design Consultants will help promote external outreach within the community to support and expand our current market reach. You are the champion of guest engagement, so our guests will experience an inspiring shopping event where they feel empowered to customize their space. You will report to the Store Leader. The hiring location is Greenville, SC. Who We Are Since 1982, Ballard Designs has offered a unique curation of home furnishings and décor from all periods and provenance. Its designers travel the world for inspiration, translating the latest fashion, color, and style trends into finely crafted products not found anywhere else. Ballard Designs is part of the Cornerstone brands - four interactive, aspirational home and apparel lifestyle brands that deliver inspirations that help customers enjoy, enhance, and celebrate life. Your Impact Provide and support design expertise for scheduled appointments (Studio and Home visits), virtual appointments, and "on-demand" design time Identify and network with local organizations and businesses that would benefit from Design Solutions services and provide them with DS marketing materials. Support the retail store team in varied responsibilities, including order entry, visual floorsets and merchandising reinforcement of store maintenance and standards, and product training activities What You Bring Exhibit a passion for design and a willing curiosity to understand and grow in the design program for our brand. Minimum of 6 months of retail experience in a Ballard Designs store or one year of retail experience in the home décor market and/or a recent college degree or associate degree graduate with a design focus. If applicable, provide a design portfolio or examples of school design concepts. Proficiency in using Microsoft Word, Excel, PowerPoint, Outlook, and other web-based platforms. Ability to work independently as directed. Ability to plan, organize, and prioritize multiple objectives. Conduct Home Visits with established guests and a valid driver's license Available to work a flexible schedule, including evenings, weekends, and holidays. Remote work is not permitted in NYC currently. Our Total Rewards package includes benefits you'll love such as competitive compensation, paid time off, an employee assistance program, parental leave, paid volunteer hours, and amazing company discounts! In our US market, you can also expect health care benefits starting on day 1, 401(k), and tuition reimbursement benefits. QVC Group is committed to inclusion and belonging for all and ensuring that our workplace provides equal employment opportunities for all team members and candidates and complies with all applicable federal, state, and local laws and regulations. As an equal opportunity employer, QVC Group is committed to a barrier-free employment process. If you need reasonable accommodations/support throughout, please contact us at ********************* for assistance. If provided, salary ranges are a general guideline only, and actual salaries will vary and are based on factors such as a candidate's qualifications, skills, experience, and geographic location as well as business and market conditions.

Rite Rug has been one of the top privately owned flooring companies for 90 years! We are looking for a motivated Design Consultant to join our team! Are you looking for an exciting, fulfilling career? Do you like knowing you have control over your own success? If so, then we are looking for you!! Unlimited earning potential with uncapped commissions (our top performers earn $150K+!) Design Consultant - Mobile Showroom The Design Consultant works within our mobile showrooms to help our customers with the design and selection of our flooring products. Rite Rug is one of the largest private owned flooring retailers in America and the support is tremendous. If you really want to be paid what you are worth, then we want to talk to you! Salary + Commission (Up to 6 figures) plus full benefits! POSITION SUMMARY: Responsible for coordinating the selection and sales process along with building and maintaining customer relationships. ESSENTIAL FUNCTIONS: * Develop and maintain positive customer relationships * Conducts sales to outside retail customers, B2B sales and area realtors. * Determine customers needs and match appropriately with our products * Promote and sell all Rite Rug flooring products and services * Take measurements for installation * Receive and process payments according to Rite Rug procedures * Follow up to ensure that the job is completed to the customer's satisfaction * Develop a thorough knowledge of all flooring products * Performs other duties as assigned Required Qualifications: 1. Have earned a minimum of a High School Diploma or equivalent. 2. Flooring experience preferred. 3. Must have a valid driver's license and be able to drive a company vehicle. 4. Must be a self-starter and a people person. 5. Be able to multi-task and prioritize the duties required. 6. Exhibit effective oral and written communication skills. 7. Be able to work independently and problem solve. 8. Be comfortable working with and learning computer systems 9. Must be eager to learn and to grow! Desired Qualifications: 1. Experience using Measure Square or RFMS Measure software. This position will offer a base salary plus commission structure and training will be provided #ZR

Design the Future of Advanced Facilities - Electronics At Jacobs, we do not settle - always looking beyond to raise the bar and deliver with excellence. We apply our expertise and knowledge as we look into the future with great optimism and focus. We don't settle until we give our best and know that we're making a difference. Are you ready to bring ideas to life in some of the most advanced facilities on the planet? We're looking for Electrical Design Specialists / BIM Leads who thrive on innovation and collaboration. Join our vibrant, dynamic team and work on semiconductor manufacturing, state-of-the-art production facilities, and cutting-edge research environments for world-class clients. Why You'll Love This Role * Impactful Work: Your designs will power industries that shape the future. * Creative Problem-Solving: Tackle complex challenges in a fast-paced, high-tech environment. * Collaborative Culture: Work alongside engineers, architects, and industry leaders in a team that values your expertise. What You'll Do * Perform computer-aided drafting and design for electrical power distribution, lighting, fire alarm, and communication systems. * Utilize AutoCAD and Revit MEP to create 3D BIM models in coordination with architects and engineers. * Develop layouts, single-lines, power plans, installation details, grounding plans, and cable schedules. * Support clash detection by identifying issues, reviewing reports, and collaborating with project teams to resolve conflicts. * Apply NEC standards and perform power calculations under the guidance of engineering staff. What We're Looking For * Experience with AutoCAD and Revit MEP in electrical design. * Strong attention to detail and ability to work in a collaborative, multi-disciplined environment. * Passion for technology and innovation in advanced manufacturing. Why Join Us? * Global Impact: Work on projects for well-known clients around the world. * Hybrid Flexibility: Enjoy a mix of remote and in-office work in Portland, Oregon or any Jacobs office in the U.S. * Professional Growth: Expand your skills in BIM leadership and advanced design technologies. Bring your curiosity, talent for multi-tasking and collaboration, and extreme organizational skills and we'll help you grow, pursue, and fulfill what drives you - so we can make big impacts on the world, together. * High school graduate or equivalent * At least 12 years of relevant experience in design utilizing 3-D modeling / drafting * At least 5 years of design experience with Revit * At least 5 years of experience as a BIM Lead * Knowledge of NEC and electrical design requirements Ideally, you'll also have: * Associate's degree in relevant field * Design experience for semiconductors, data centers or mission critical facilities #afelectronics #bim #electricaldesign #LI-MP1 Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

Job Description Precast Revit Designers are responsible to: Develop and maintain structural Revit models for precast concrete and other structural projects. Create and modify Revit families, including custom and special connection details. Collaborate with engineers and the firm's Revit champion to ensure models meet design intent and project standards. Prepare detailed shop drawings and coordination models for precast and structural components. Participate in model coordination meetings and assist with clash detection and resolution. Utilize Autodesk Construction Cloud (ACC) for project collaboration, model sharing, and version control. Support project teams with Revit troubleshooting and best practices. Coordinate with clients, external consultants, contractors, and project teams to ensure accurate and timely deliverables. Assist in the continuous improvement of BIM standards and workflows within the Precast division. Qualifications: 3-10 years of professional Revit design experience Structural experience required; precast concrete design industry experience a plus Proficiency in AutoDesk Revit modeling software Experience with Autodesk Construction Cloud (ACC) required Strong understanding of structural drafting standards and practices Ability to work collaboratively in a team-oriented environment Proven ability to work on multiple projects in a fast-paced environment Self-motivated and proactive Excellent communication skills Strong computer skills in Microsoft Word, Excel and Outlook

Southern Tide, LLCGreenville, SC - Southern Tide Headquarters At Southern Tide, our mission is to share our love for the coastal lifestyle through premium products, experiences, and service. We offer competitive benefits packages which may include generous vacation policy, health and wellness coverage, 401k with company match, discounted stock purchasing, options for education reimbursement, and amazing product discounts! The Designer works directly with Design leadership, collaborating to create a line consistent with seasonal direction and the Southern Tide aesthetic. The Designer is responsible for the day-to-day design functions for assigned categories that align with Southern Tide's brand vision and target market. Crew Position: Design and develop concepts for assigned categories based on the company's seasonal direction (e.g. color, styling, etc.). Contribute to the selection and complete development of suitable fabrics, trims, and accessories for each design. Contribute to the print design process for all seasonal prints and own entire development of assigned prints. Research and stay abreast of seasonal trends. Develop sketches for assigned categories. Collaborate with product development and technical design teams to prevent and resolve production problems for current and upcoming seasons. This includes ongoing communication to ensure product development has accurate, timely detailed information. Participate in approvals process for assigned categories. Provide product development with all accurate details of assigned categories products. Develop solid relationships and communicate daily with internal and external cross functional counterparts to assure efficient & clear communication through the entire development process, ensuring the design intent, revisions and aesthetic is communicated. Assist with line presentation biannually to sales team Assist with presentation of seasonal line design ideas to cross functional internal teams biannually. Work closely with cross functional teams and Design Manager to ensure calendar deadlines are met, ensuring all products are on time for sales meetings, photo shoots and in-store deliveries. Attend and lead fit sessions with Design leadership, product development, and technical design teams, providing feedback on garment fit, construction, and overall design. Collaborate closely with cross-functional teams including product development, merchandising, marketing and sales to ensure timelines are met and designs meet aesthetic, functional, and requirements. This Company is an equal opportunity employer and does not discriminate against qualified applicant based on race, color, sex, gender, gender identity, gender expression, religious creed, sexual orientation, pregnancy, national origin, ancestry, age, military and veteran status, marital status, physical or mental disability, protected medical condition, genetic information, reproductive health decision-making, lawful off-duty use of marijuana, any other characteristic protected by law, or any combination of two or more of the characteristics listed here. If you need an accommodation to complete an online application, please contact the location you are applying to or contact us at **************. U.S. EEOC: Know Your Rights Southern Tide participates in E-Verify. Details in English and Spanish. Right to Work Statement in English and Spanish. Please click here to review our Applicant Privacy Policy.

Alfred Williams & Company is one of the largest MillerKnoll dealers in the country with a reputation for innovation, teamwork and a people-first culture. This is a great opportunity to be part of a talented and collaborative team that is passionate about creating meaningful workplace solutions. To further build and develop our furniture planning team, Alfred Williams & Company is looking for a senior Designer. Responsibilities and skillset requirements include: Personal and Interpersonal Skills Self-starter who is highly motivated, flexible, and able to multi-task Works well in a cross-functional team environment, exhibiting exceptional communication skills Able to prioritize tasks and meet deadlines on multiple projects simultaneously Responsibilities and Technical Skills Skilled and efficient input of furniture layouts and space plans into AutoCAD via CAP and CET Experience with pricing and discounting commercial furniture to produce client proposals Development of color and material presentations, both electronic and physical Communicate with vendors to determine pricing, discounts, etc. Set up and maintain project files per design and company standards Field verification and measurement of site conditions Experience in space planning, typical development, and systems furniture layout Compile detailed inventory of existing product (stored or on-site) & record information with minimal assistance Development of installation drawings Basic understanding of Building Codes, ADA requirements, and Electrical/Data requirements applied to a project Check all drawings and specifications for 100% accuracy Assist to define the scope of a project, assess customer needs and program design applications Active and thoughtful participation in client interactions and programming sessions Qualifications Graduate of a four-year program or equivalent work experience with a two-year degree with a bachelor's/associate degree in interior design, preferred. A minimum five-year practical experience in commercial furniture design and planning. Proficiency in CET Designer is required. MillerKnoll product knowledge is strongly preferred. Proficient in the use of software such as Microsoft Word, Excel, PowerPoint, and Adobe Acrobat Professional

Temp Job Summary: The Designer III (DT III) position is the third level in the Designer career track. This career track is tasked with providing designs for utility systems including but not limited to: Overhead and underground circuits for joint use, lighting, and commercial, industrial and residential development and gas and generation systems. This track is also responsible for field data collection and assists with storm restoration when requested. This role involves handling moderately complex design projects and providing support to others for more complex projects with more independence than the DT II. The DT III will have interactions with clients/customers and construction crews to progress their projects. This position primarily involves working in an office environment. There is an expectation of significant field work, which may include exposure to inclement weather conditions such as extreme heat/cold, high humidity, rain, snow and icy conditions. Key Technical Skills Required: Your key responsibilities include: ·Independently performing field data collection and project-specific inspections for moderately complex projects, accurately and efficiently. ·Producing high-quality computer-aided design drawings and a list of materials needed for the construction of simple projects and providing support required by supervision for more complex tasks. ·Ensuring all necessary communications are documented on projects designed as required by training. ·Providing guidance and training to peers and newer designers for simple projects. ·Producing permitting documentation, as needed, independently. ·Demonstrating the ability to communicate with clients and participating in site meetings with oversight. This role will work independently, but under supervision for mentorship, guidance and training. Education and/or Work Experience Required: High School Diploma or equivalent, and four years relevant work experience, or an Associate's Degree and three year of relevant work experience. : Valid driver's license. Work Environment: The work environment for this position involves a mix of office-based tasks and fieldwork. This position will support engineering projects by collecting desktop and field data to perform planning, design, and project management tasks. This position may also require visits to construction or project sites to collect measurements, take photos, talk with stakeholders, and observe project conditions, and learn about field operations. Noise Level: The office environment is typically quiet to moderate but include adjacent, occupied work spaces, while field visits may expose the intern to moderate to loud noise levels, especially in active construction areas. Work Sites: During site visits, the employee may be exposed to various outdoor conditions, including weather, uneven terrain, utility components, tools and measurement devices and active construction environments. KCI will provide necessary safety equipment (PPE), such as hard hats, safety vests, gloves, and ear protection, which must be worn as required. Employees are responsible for supplying their own protective footwear and appropriate attire for the assigned tasks. Physical Demands: The physical demands described here are representative of those that must be met by the employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Mobility: The employee will spend a good portion of their time seated in an office environment working on a computer. However, they will be required to stand, walk, and move across construction sites, outdoor public areas, utility equipment areas or other project areas during site visits. Manual Dexterity: Frequent use of hands and fingers is necessary for drafting, writing reports, and using computers. The employee may also handle physical documents and work with small tools during field tasks including a measuring stick that extended to 35' touching utility systems. Lifting Requirements: Minimal lifting is required, but occasionally the employee may be required to lift and/or move up to 35 lbs. Visual and Auditory Requirements: The employee must be able to read and interpret engineering plans, blueprints, and technical documents. Strong verbal and written communication skills are essential for interactions with team members and on-site personnel. The job description is not designed to contain a complete listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time. * Essential functions are the basic job duties that an employee must be able to perform, with or without reasonable accommodation. Factors to consider in determining if a function is essential include: whether the reason the position exists is to perform that function, the number of other employees available to perform the function or among whom the performance of the function can be distributed, and the degree of expertise or skill required to perform the function.

The Visual Merchandiser's primary responsibility is to fulfill our mission statement, “to create the most enjoyable shopping experience possible for our Guests.” Visual Merchandising Teammates will contribute to profitability by taking charge of the visual appearance and shopability of the store using visual guidelines. Essential Duties and Responsibilities This description intends to describe the general nature and level of work performed by Teammates assigned to this job. It is not intended to include all duties, responsibilities and qualifications. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ensure timely installation and demonstrate the ability to properly install and remove window presentations and store promotion events in a timely manner, including the ability to pack, unpack, and prep all props while supporting the visual direction of the company standard. Partner with store leadership to discuss and plan store layouts and creative design flow of the merchandise including product rotation and markdown placement. Strive to do better business by consistently communicating with leadership team. Educate the reasons driving visual strategies to Buckle leadership. Display urgency when getting new product to the floor. Assisting with Guests and Teammates as needed. Strategic understanding of the Sales Presentation, Register and iPad to help assist Guests. Ability to work a flexible schedule, which may include mornings, evenings, and weekends, and the day of/day after Thanksgiving and Christmas, based upon store and business needs. Communicate any policy violations and Teammate or Guest concerns to Store Manager, District Manager, and/or Human Resources in a timely, confidential manner. Understand and apply the Buckle's Code of Ethics and all Buckle's policies, procedures, and handbooks. Fulfill mission statement by performing job duties with a high level of customer service while contributing to a positive team spirit. Special projects and other duties as assigned. Supervisory Responsibilities This job has no supervisory responsibilities. Part-time Benefits Benefits Available (after applicable waiting period): Teammate Discount Performance Bonuses Employee Assistance Program 401(k) (subject to additional requirements) Paid Sick Time (where required by state) Education and/or Experience Associate's degree or equivalent from two-year College or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. Physical Demands The physical demands described here are representative of those that must be met by a Teammate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the Teammate is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk and hear. The Teammate is occasionally required to sit. Physical ability to lift and maneuver 50lbs throughout the store and backroom. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment While performing the duties of this job, the Teammate regularly works in a retail store setting. The noise level in the work environment is usually moderate. Equal Employment Opportunity Buckle is committed to hiring and developing the most qualified Teammates from the available workforce in the communities we serve. Equal employment opportunity has been, and will continue to be, a fundamental principle at Buckle, where employment is based upon personal capabilities and qualifications without discrimination and retaliation because of veteran status, uniformed service member status, race, color, national origin or ancestry, creed, religion, sex, sexual orientation, gender identity or expression, age, pregnancy (including childbirth, lactation, and related medical conditions), national origin or ancestry, physical or mental disability, genetic information (including characteristics and testing), or any other protected characteristic as established by applicable local, state, or federal law. For state specific information, refer to the Teammate Center. #LI-Onsite