Machine operator jobs in Apex, NC

HELLO! Do you live in these surrounding areas...Fuquary Varnia, Angier, Sanford, Apex? COME Join a Winning Team in Holly Springs, NC. DS Smith Holly Springs is looking to fill Openings for Assistant Machine Operators Assistant Machine Operators - Starting Pay $18 - Eligible for 3 pay increases to $19 top out in 1 year. ***Annual Increases after Top Out*** Thirteen Paid Holidays and two (2) weeks vacation Eligible for Health Benefits on Day 1 of employment Essential Duties and Responsibilities Follow all plant health and safety standards including wearing proper PPE Assist Operator and other team members in setting up machine to prepare for running of orders Mount print plates to rolls Mount die boards to rolls Setting up ink stations including the adding and removal of inks into and from the machine Setup board in feeding section Preparing bottom pads and side pads for stacking Perform all quality checks and alert Operator of any non-conformities Monitor quality of incoming stock and finished product during runs Monitor ink viscosity and PH periodically throughout the shift Feed stock into hopper Stack off finished product from conveyor line Perform end of shift cleanups Qualifications: Must follow all plant rules including wearing of PPE at all times Basic reasoning, mathematical, reading, and maintenance skills Must be able to read a tape measure to 1/16 of an inch Must be dependable and report to work on-time for start of shift when scheduled Corrugated experience preferred, but not required Must be able to read and understand work orders Communicate to team members about non-conformities Communicate to supervisors about health and safety issues Physical Demands: Be able to lift up to 25LBS repeatedly Able to stand for entire shift Be able to bend, twist, pull, and push up to 25LBS Repetitive gripping and wrist motions Environment: Manufacturing environment Loud and constant machine and forklift noise (Earplugs required) Dust/dirt (Goggles and facemask required) Slippery surfaces due to water usage during cleanups Concrete and hard walking surfaces (Steel toed boots required) Cool in the Winter Hot in the summer (No A/C) SQF Food Safety / Food Packaging Safety Must have a basic understanding of Good Manufacturing Practices, and knowledge of Allergens (DS Smith will train). Must read and agree to the Food Packaging Safety/Food Safety policy, food defense, and GMP requirements. This includes no mints, gum, or food in the work areas. Only water may be consumed in the work areas. Products may not touch the floor. Employees must be able to assist in product setup and perform line clearance tasks.

Job DescriptionDescription: Work with concrete crushers Requirements:

Labcorp is seeking a dedicated and motivated individual to join their Laboratory Robotics Operator team in Burlington, NC. The Robotics Operator will be responsible for processing clinical specimen for acceptability and maintain the operational condition of the automated instrument to deliver to the testing departments in a fast-paced, high-throughput environment according to established standard operating procedures. Work Schedule: Third Shift, Monday-Friday 10:00pm to 6:30am Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. For more detailed information, please click here. Job Responsibilities Introduce and prepare biological specimens to the laboratory to ensure accurate processing Open specimens and pour off into secondary containers to prepare for analysis and testing Verify patient demographic information matches the test requisition form submitted Data entry of patient information into the computer system for tracking purposes Meet key production metrics and quality measures to ensure timely and accurate results Unpack and route specimens to their respective staging areas Pack and ship specimens to proper testing facilities when required Properly prepare and store excess specimen samples Resolve and document any problem specimens Handle and dispose of medical and chemical waste Comply with applicable environmental health and safety policies and procedures Operate automated instrumentation under supervision if necessary Requirements High School Diploma or equivalent Prior specimen processing experience is preferred Previous experience using automated equipment is a plus Proficient computer and typing skills Must pass standardized color vision test Comfortable handling human biological specimens including blood, urine and tissue samples Ability to lift up to 30lbs, work in protective equipment and sit/stand for long periods of time Strong eye hand coordination in order to accurately identify specimens by touch and sight Ability to work both independently and in a team environment High level of attention to detail with the ability to problem solve Strong communication skills; both written and verbal Ability to work overtime when needed If you're looking for a career that offers opportunities for growth, continual development, professional challenge and the chance to make a real difference, apply today! Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.

Plastic Ingenuity is committed to providing innovative, high-quality packaging for the food, healthcare, and consumer goods industries. At the company's heart are five core values that define who we are and why we have sustained success since 1972. We are friendly and genuine, fostering authentic connections with colleagues and clients alike. Resourcefulness defines our approach, allowing us to turn challenges into opportunities. Collaboration is ingrained in our process, uniting diverse perspectives to identify creative solutions. Total customer focus drives us; we listen intently, respond promptly, and consistently exceed expectations. Lastly, we are dependable doers, letting our actions speak louder than words. These values are the cornerstone of Plastic Ingenuity. Role Summary: The Extrusion Operator is responsible for setting up jobs on the extruder. This includes changing the die set, putting on deckles, setting gaps on rollers, filling the extruder with materials, and maintaining the extruder to produce rolls of plastic to be sold or used in production. All work is performed in a climate- controlled environment. Personality and Interest Profile - You may enjoy this role if you: Are a self motivated problem solver Enjoys using hand tools Accountable for: Monitoring and troubleshooting any problem with the extruder. Overseeing each job that runs and ensures each job is completed Understanding and completing the required paperwork regarding equipment maintenance, job setup and quality standards. Changing the rolls on the extruder, using a hoist to lift and carry the roll to the skid Perform maintenance activities on the extruder Help with other tasks within the department Follows good manufacturing practices to ensure product safety. Ability to work independently and have sound technical judgment to work without much technical direction from manager. Desired Qualifications: High school diploma or equivalent Attention to detail Dexterity and the ability to work quickly and accurately Physical Demands: Frequent lifting of 15-25 lbs/Occasional lifting up to 50 lbs/More than 50 lbs requires a team lift Frequent repetitious tasks with upper extremities Prolonged periods of standing on concrete floor Ability to correctly wear/use personal protective equipment including long sleeves as required Frequent climbing steps and/or ladders while working on elevated platforms Work involves exposure to high temperatures within a climate-controlled environment. WE ARE HIRING FOR 1ST SHIFT (MON- FRI 6:15 AM-2:30 PM) 2ND SHIFT (MON - FRI 2:15 PM -10:30 PM) 3RD SHIFT (SUN - THU 10:15 PM - 6:30 AM) Plastic Ingenuity is an Equal Opportunity Employer. We are committed to a diverse and inclusive workplace, as we know that each of our employees helps to make us better. We strongly encourage applicants from all backgrounds and walks of life. Come join us.

The Brushing Machine Operator is responsible for operating and maintaining brushing machines that use sandpaper or abrasive rollers to produce a soft, smooth, and suede-like surface on knitted fabrics. This role requires precision, attention to detail, and an understanding of fabric finishing techniques to achieve consistent texture and appearance while minimizing waste and defects. Responsibilities Set up and operate brushing machines according to production specifications and fabric types. Install, inspect, and replace sandpaper rolls or abrasive sleeves as needed. Adjust key parameters - such as roller speed, fabric tension, pressure, and direction of run- to achieve the desired effect. Load and unload fabric rolls safely, ensuring correct alignment and smooth feeding through the machine. Continuously monitor fabric surface and machine operation throughout production. Inspect fabrics for consistent surface softness, nap direction, and color uniformity. Identify and correct issues such as over-brushing, streaking, or surface damage. Record production and quality data, including machine settings, lot numbers, and inspection results. Communicate with the quality control and finishing teams to ensure that all fabrics meet customer and product standards. Perform routine cleaning and basic maintenance of brushing machines to prevent buildup on abrasive rollers. Monitor the wear of sandpaper and replace it promptly to maintain quality output. Report mechanical or electrical issues to maintenance personnel. Keep work area clean, organized, and compliant with safety and 5S standards. Follow all plant safety procedures and wear appropriate personal protective equipment (PPE), including gloves, eye protection, and hearing protection. Requirements High school diploma or equivalent required. 1-2 years of experience operating brushing, emerizing, or other fabric finishing machines preferred. Knowledge of textile properties (knit fabrics) beneficial. Strong mechanical aptitude and attention to detail. Ability to identify and correct surface texture inconsistencies. Basic recordkeeping and communication skills. Team-oriented, safety-conscious attitude. Ability to stand and operate equipment for long periods. Frequent bending, lifting (up to 50 lbs), and manual handling of fabric rolls and A-frames. Exposure to noise and heat. Good vision and tactile sensitivity for assessing fabric surface quality. About Us: Shawmut Corporation pioneers textile innovation, delivering high-performance materials for Automotive, Health & Safety, Defense, and Custom Laminating Solutions. Proudly operating since 1916, we now operate globally with thirteen locations across three continents. Our team excels in engineering and analytics, fostering a collaborative environment to meet industry demands. Committed to sustainability and employee well-being, we offer safe, healthy workplaces. Join us and be part of a dynamic, innovative company shaping the future of textiles. About the location: Shawmut Corporation's Park Avenue Technical Center in Burlington, North Carolina is a premier hub for innovation in the US textile industry. With a world-class team comprising design, engineering, lab, technical, manufacturing, and program management experts, this facility is at the forefront of supporting several of Shawmut's core markets, including Automotive, Filtration, Military and Protective, and Health and Safety. As one of the largest and most technologically advanced and sustainable fabric finishing operations in the US, this recently renovated facility also boasts cutting-edge customer meeting and collaboration facilities alongside state-of-the-art technical, quality, and color labs. Join us at Shawmut's Park Avenue Technical Center, where cutting-edge technology meets industry-leading expertise to shape the future of innovative manufacturing. Shawmut. Materials Innovation for a Better World Ready to be part of a team that's making the world a more sustainable place? Apply now and let's embark on this exciting journey together! Compensation & Benefits: Competitive wage structure reflective of current market trends. Medical, dental, and vision coverage options through Blue Cross Blue Shield of Massachusetts (BCBS) and EyeMed Health savings accounts (HSA) and flexible spending accounts (FSA) Company-paid basic life and AD&D insurance Short-term and long-term disability coverage Employee assistance and wellness programs 401(k) Retirement Savings Plan Shawmut Corporation is an equal opportunity employer, committed to providing fair employment opportunities to all individuals regardless of race, color, religion, sex, national origin, age, disability, genetic information, marital status, sexual orientation, gender identity or expression, veteran status, or any other characteristic protected by law. We are dedicated to maintaining a safe work environment in line with ISO standards. Employees are expected to comply with all safety regulations, identify and report hazards, attend safety training, report incidents promptly, use required PPE, and participate in continuous safety improvements and emergency preparedness activities. By following these guidelines, we aim to minimize risks and ensure the well-being of everyone at Shawmut Corporation. Salary Description $17/hr

The Greer Group is hiring an experienced Production Operator for our Automotive client located in Sanford, NC. This is a temp to hire position, with growth opportunity's. Once hired on your pay will go up to $20.30/hour! Temp To hire Must be able to train on A shift which is Monday-Thursday, 6: 30 AM-5: 00PM for 2 weeks. B Shift Hours:- Monday-Thursday, 8: 00 pm-6: 30 am. Pay: $18/hour -$19.35/hour depending on experience. Job Description: Operate semi-complex equipment and machines, prioritizing routine tasks to improve efficiency and adjusting multiple related variables to resolve production problems. Carry out TPM checks and activities following close instructions. Perform inspection of finished products for any defects or issues. Repetitive movement involved to carry out changeovers of one or more equipment. Reading blueprints to follow directions. Adjusting machinery to meet standards. Identify machine issues, and perform light maintenance.

Job Description HELLO! Do you live in these surrounding areas...Fuquary Varnia, Angier, Sanford, Apex? COME Join a Winning Team in Holly Springs, NC. DS Smith Holly Springs is looking to fill Openings for Assistant Machine Operators Assistant Machine Operators - Starting Pay $18 - Eligible for 3 pay increases to $19 top out in 1 year. ***Annual Increases after Top Out*** Thirteen Paid Holidays and two (2) weeks vacation Eligible for Health Benefits on Day 1 of employment Essential Duties and Responsibilities Follow all plant health and safety standards including wearing proper PPE Assist Operator and other team members in setting up machine to prepare for running of orders Mount print plates to rolls Mount die boards to rolls Setting up ink stations including the adding and removal of inks into and from the machine Setup board in feeding section Preparing bottom pads and side pads for stacking Perform all quality checks and alert Operator of any non-conformities Monitor quality of incoming stock and finished product during runs Monitor ink viscosity and PH periodically throughout the shift Feed stock into hopper Stack off finished product from conveyor line Perform end of shift cleanups Qualifications: Must follow all plant rules including wearing of PPE at all times Basic reasoning, mathematical, reading, and maintenance skills Must be able to read a tape measure to 1/16 of an inch Must be dependable and report to work on-time for start of shift when scheduled Corrugated experience preferred, but not required Must be able to read and understand work orders Communicate to team members about non-conformities Communicate to supervisors about health and safety issues Physical Demands: Be able to lift up to 25LBS repeatedly Able to stand for entire shift Be able to bend, twist, pull, and push up to 25LBS Repetitive gripping and wrist motions Environment: Manufacturing environment Loud and constant machine and forklift noise (Earplugs required) Dust/dirt (Goggles and facemask required) Slippery surfaces due to water usage during cleanups Concrete and hard walking surfaces (Steel toed boots required) Cool in the Winter Hot in the summer (No A/C) SQF Food Safety / Food Packaging Safety Must have a basic understanding of Good Manufacturing Practices, and knowledge of Allergens (DS Smith will train). Must read and agree to the Food Packaging Safety/Food Safety policy, food defense, and GMP requirements. This includes no mints, gum, or food in the work areas. Only water may be consumed in the work areas. Products may not touch the floor. Employees must be able to assist in product setup and perform line clearance tasks.

GARNEY CONSTRUCTION A Heavy Equipment Operator position in Sanford, NC is available at Garney Construction. To be considered for this position you must have previous construction experience. As an operator, you will operate machinery to perform activities such as excavating, backfilling, trenching, ditching, clearing, looming, fine grading, and final clean up. The heavy equipment operator may perform functions of a laborer as required. WHAT YOU WILL BE DOING * Operate heavy equipment safely as part of a crew. * Perform Operator-level maintenance on the machine. * Understand safe working loads and signals. * Must be willing to work overtime as required. WHAT WE ARE LOOKING FOR * 3 years of construction experience. * Firm knowledge of equipment operations and maintenance. * Must be willing to work overtime as required. * Willing to travel. LET'S TALK THE PERKS! * Employee Stock Ownership Plan (ESOP) * 401K Retirement plan * Health, dental, and life insurance * Bonus program * Paid holidays * Paid time off * Flexible Spending Account (FSA) or Health Savings Account (HSA) * Long-term disability CONTACT US If you are interested in this Heavy Equipment Operator position in Sanford, NC then please APPLY NOW. For other opportunities available at Garney Construction go to careers.garney.com. THE BENEFITS OF WORKING AT GARNEY Free medical, prescription, dental, and vision plans ($0 premiums) Virtual doctor visits with no co-pay Shares of company stock at no cost starting your first day 401(k) plan with a 3.5% match Student loan resources Weekly paychecks Paid time off 8 paid holidays Health Savings Account (HSA) with a lump sum and matching contributions Free life insurance & disability policy Free access to healthcare coordinators Counseling sessions with mental health professionals at no cost Access to consultations with legal/financial professionals at no cost Free programs assisting with weight loss, maternity health, prescriptions for chronic conditions, and more 50% employee discount in the Garney apparel store BUILDING SUSTAINABLE FUTURES WITH THE WORLD'S MOST PRECIOUS RESOURCES-WATER AND PEOPLE. EEO - it's the law poster Right to work This organization participates in E-verify Nearest Major Market: Greensboro

Full-time Description REVERE is here! Join our awesome team. Our mission is to be the best in the world at what we do and have fun doing it. This means using to the fullest extent the talents of all Revere people working as a team in a safe, environmentally sound and ethical manner to achieve absolute customer satisfaction through superior quality and reliability. At Revere South we look for people who will show up as themselves because we value diversity and involvement. If you think you align with our values and culture, come check out our company page and become a member of the Revere South family! Summary: Shift: 7 AM - 7 PM As a Production Team member, you will be part of a team-oriented environment, where safety is our priority. Each Team Member will have engagement in safety and quality to help ensure the safety of our employees and deliver the best possible quality to our customers. Requirements The employee is responsible to maintain the equipment in good operating condition. This includes the completion of the Operators Basic Care at the start of each shift. Operation of mill machines. Production and time entry in MESA computer system. Understand and adhere to Job Instructions Breakdown (JIB) for operation within their scope of duty. Reads production Schedule / Dispatch to determine processing sequence. Machine set up. Verifies Process Instructions using Process master. Use measuring tools to capture process data. Makes adjustments to keep product in specifications. Actively work as a team member, giving feedback on operating and quality practices to their team and supervision. Operate Crane/Forklift to move materials in preparation for transfer to the next process. Perform Safety Observations; provide feedback on production or safety issues on machines. Qualifications: Minimum: High School Diploma/ GED Special Requirements: While performing the duties of this job, will be regularly exposed to work near moving mechanical parts. May be exposed to wet or humid conditions. May be regularly exposed to high noise environments. Must be willing to enhance and learn new skill sets. Actively participate in safety initiatives. Benefits: 401(k) 401(k) matching Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Retirement plan Vision insurance Schedule: 4x12 hour shifts Work Location: In person Salary Description $20.50/hr with increase after training completion

Job DescriptionMachine Operator (Production Associate) Location: Durham, NC Shift: 3rd Shift Sunday - Thursday 11:00pm - 7:30am As a Machine Operator, you will play a critical role in assembling materials and operating equipment safely and efficiently. Your responsibilities will include: Assembling materials and operating equipment within specifications. Measuring, assembling, applying chemicals, and transporting materials with precision. Verifying that solutions, materials, and finished products meet specifications before use or release. Handling raw materials and finished products with care to prevent damage. Operating equipment in accordance with safety guidelines and specifications. Maintaining process specifications and inspecting products for quality. Accurately recording process data and information. Making informed decisions based on gathered data. Communicating issues regarding products, processes, and data to supervisors or managers promptly. Requirements for the Machine Operator: Reliable means of transportation. Ability to pass a drug screen and background check. Self-motivated with good basic math and written communication skills. Safety-conscious and willing to take on responsibility. Ability to work effectively in a team and maintain good attendance. Capable of lifting up to 50 pounds. Ability to read, follow instructions, and accurately record information. Work experience in an industrial environment with knowledge of general plant safety. Working Conditions: Exposure to mechanical noise, a dusty work environment, and varying temperatures. Physical Requirements for the Machine Operator Ability to lift, push, pull, and carry 25 pounds frequently and 50 pounds occasionally. Standing for extended periods and performing physical activities like walking, stooping, bending, crouching, twisting, climbing, and kneeling.

Alliance Industrial Solutions has multiple partners seeking experienced Machine Operators! These are full time positions located in Durham, NC. Pay: $16-$18.81 to start with raise following training Shift: 7am-7pm 2-2-3 ($17.50) 7pm-7am 2-2-3 ($18.81) 7am-4:30pm M-F ($16) 4pm-12:30am M-F ($16) Position Summary: We are seeking a skilled and motivated Machine Operator to join our production teams, supporting either Overwrap or Embroidery operations. These positions are responsible for setting up, operating, and monitoring production equipment to ensure quality, efficiency, and accuracy throughout each shift. The ideal candidate is mechanically inclined, detail-oriented, and confident troubleshooting equipment issues-not just pushing buttons. Key Responsibilities: Set up, operate, and adjust overwrap or embroidery machines for changeovers and production runs. Load and prepare materials (threads, needles, films, fabrics, etc.) according to job specifications. Monitor equipment performance and make real-time adjustments to maintain quality and efficiency. Interpret design and production specifications to ensure proper placement, alignment, and finish. Conduct quality checks on finished products, addressing defects or irregularities promptly. Perform routine maintenance, cleaning, and troubleshooting using hand tools (wrenches, pliers, screwdrivers). Keep accurate records of production counts, settings, and completed work. Maintain a clean, organized, and safe work area. Perform other duties as assigned by the supervisor. Qualifications: High school diploma or equivalent Minimum 1 year of machine operation experience in a manufacturing or production environment (required). Mechanical aptitude and ability to “read” and understand machine performance. Familiarity with embroidery, sewing, or textile production a plus. Proficient computer and recordkeeping skills. Strong troubleshooting ability and problem-solving mindset. Reliable attendance and teamwork orientation. Ability to read, speak, and understand English. Skills: Strong attention to detail and quality. Effective verbal and written communication. Basic math skills (addition, subtraction, multiplication, division). Ability to manage multiple priorities in a fast-paced environment. Customer-focused and team-oriented attitude. Physical Requirements: Frequent standing, walking, bending, twisting, and lifting. Ability to lift up to 25 lbs frequently and up to 60 lbs occasionally. Comfortable performing repetitive tasks and standing for extended periods. If you are interested in these full time Machine Operator roles in Durham, NC please apply today!

Work days/hours: Mon -Thursday 9pm - 7am Performs routine production functions including filling, packing, packaging, assembling, labeling and inspecting under general supervision. Maintains accurate records and logs in accordance with FDA (Food and Drug Administration), GMPs (Good Manufacturing Practices) and ISO9000 (International Organization for Standardization). Effectively works in a team setting, supporting team goals and objectives. Makes effective decisions relative to position requirements. Must follow instructions and work within routine, standard practices, making decisions as required. Works under direct supervision, following standard operating procedures. Education: High school diploma or equivalent. Experience: 2 years manufacturing experience Manually packages kits, performs cleaning functions, Test/Inspects parts for in-process quality checks, Trains others, accurately completes paperwork, pulls raw material for orders, feeds raw materials on the production line, clears most common machine faults, Preforms set up and start up tasks, Performs shut down tasks, performs most controls and adjustments for machine settings, performs a few preventative maintenance tasks, demonstrates the ability to follow and document established procedures according to GMP, works on operational metrics such as output and scrap, striving for continuous improvement, utilizes MES to support production activities and workflows, uses SAP to track and manage inventory and production data effectively, must follow all Client housekeeping policies and procedures, must follow all Client safety policies and procedures, must be able to work OT as required to meet Client business requirements, perform other duties as required.

Performs machine operations on a single machine while producing the desired quality and quantity of parts having shoulders, steps, tapers, threads, unusual contours, exact tolerances, and other precise machining functions. Use precision measuring instruments necessary to check and maintain accuracy of results Set up and maintain work area, determine proper feeds and speeds while obtaining proper results Any other duties as assigned. Qualifications / Experience / Skills Minimum Requirements: High school diploma or GED Read and write the English language Demonstrate good manufacturing skills

Why Join Palziv North America? At Palziv, we believe our employees are our greatest asset. We offer a supportive work environment with great benefits and long-term opportunities, including: Comprehensive Health Benefits - Medical, Dental, and Vision coverage. Retirement Savings - 401(k) with company contribution. Paid Time Off & Holidays - Competitive vacation, personal, and holiday pay. Company-Provided Training - Opportunities to grow and advance within the organization. Stable Work Environment - A growing company with long-term career opportunities. About Us Palziv North America is a leading manufacturer of cross-linked polyethylene foam products, serving industries including automotive, construction, packaging, and consumer goods. We take pride in our commitment to quality, innovation, safety, and teamwork. Position Summary We are seeking dedicated and reliable Production Associates to join our manufacturing team. This role is critical in ensuring high-quality products are manufactured safely and efficiently. We value individuals with a strong work ethic, consistent attendance, and a team-first mindset. Key Responsibilities Operate machinery and equipment safely and efficiently. Monitor product quality and perform routine checks to meet standards. Assist with material handling, packaging, and labeling of products. Maintain a clean and organized work area in compliance with safety standards. Follow standard operating procedures (SOPs) and company policies. Collaborate with team members and supervisors to meet production goals. Demonstrate consistent and reliable attendance. Qualifications High school diploma or equivalent preferred. Prior manufacturing or production machine operation experience REQUIRED. Ability to stand, lift, and move materials for extended periods. Dependable, hardworking, and eager to learn. Team-oriented with strong communication skills. Commitment to safety and quality standards.

Job Description We are looking for a skilled Machine Operator to set up, maintain and operate machinery. You'll ensure the interminable and efficient running of production. A great machine operator is reliable and able to work with attention to detail and safety standards. On-the-job training is a good way to discover how to do the job better, so you should have willingness to learn and improve. Being a team player is essential since all tasks will require close collaboration with co-workers. The goal will be to ensure that production procedures will be carried on smoothly to maximize efficiency. Responsibilities Set up machines (calibration, cleaning etc.) to start a production cycle Control and adjust machine settings (e.g. speed) Feed raw material or parts to semi-automated machines Managing chemical usage/storage/disposal Inspect parts with precision and measuring tools Test operation of machines periodically Fix issues that might occur during the shift Check output to spot any machine-related mistakes or flaws Keep records of approved, defective units, and final products Maintain activity logs Skills Proven experience as a machine operator Understanding of production procedures Adherence to health and safety regulations (e.g. constant use of protective gear) Attention to detail Teamwork and communication skills Physical stamina and strength (lift 40lbs) Able to read and speak English High school diploma or equivalent; technical degree is a plus

About Us GKN Automotive is the market leader in conventional, all-wheel and electrified drive systems and solutions. With a comprehensive global footprint, we design, develop, manufacture and integrate an extensive range of driveline technologies for over 90% of the world's car manufacturers. Role purpose Controls or operates machinery or equipment to assist with manufacturing, assembly, and other steps along a production line. Key responsibilities Operating Machine or Equipment Operate semi-complex equipment and machines, prioritizing routine tasks to improve efficiency and adjusting multiple related variables to resolve production problems. Operations Management Carry out operational tasks by following established processes. This will involve adjusting multiple settings or parameters to meet performance standards. Equipment Changeover Carry out changeover of one or more equipment, following detailed instructions and working under close supervision to complete the allocated tasks. Equipment Total Productive Maintenance Carry out TPM checks and activities, following detailed instructions and working under close supervision to complete the allocated tasks. Quality Carry out relatively simple testing and quality assurance tasks. Health, Safety and Environment Follow a range of mandatory procedures and methods of work (including use of personal protection equipment where relevant) to safeguard the environment and the wellbeing of oneself and others. Operational Compliance Follow a range of mandatory procedures to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct. Work Scheduling and Allocation Organize own work schedule each day in line with changing priorities. Personal Capability Building Support others by implementing improvements and carrying out simple change management tasks. Values & Behaviours Ingenious: Manages complexity Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. For example, gathers basic information to understand a problem and find a solution. Seeks to understand and apply systematic problem-solving methods; distinguishes symptoms from underlying problems. Collaborative: Builds relationships Builds partnerships and works collaboratively with others to meet shared objectives. For example, learns how to operate as a team player, contributing actively to the group's efforts. Seeks others' inputs, appreciates their contributions; offers to help when the need is clear. Principled: Accountability Holds self and others accountable to meet commitments. For example, holds self to high standards and consistently honors policies, procedures, and work requirements. Scrupulously ensures all work is correct. Principled: Communicates effectively Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. For example, pays attention to others' insights, advice, or instruction, grasping the main elements. Promptly shares relevant information with the right amount of detail. Driven: Prioritisation Plans and prioritizes work to meet commitments aligned with organizational goals. For example, adopts a sequence of activities that allows for optimal efficiency and effective coordination with others. Makes skillful use of resources and support to deliver efficient, high-quality work. Driven: Results driven Consistently achieves results, even under tough circumstances. For example, devotes considerable effort to surpassing goals and achieving the best possible results; goes above and beyond to achieve excellence. Drives ahead with great focus when faced with obstacles and setbacks; maintains productivity and a positive attitude. Driven: Action oriented Takes on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. For example, tackles what needs to be done with enthusiasm, working quickly and without undue oversight. Skills Verbal Communication Uses clear and effective verbal communications skills with guidance (but not constant supervision) to express ideas, request actions and formulate plans or policies. Health and Safety Manages and applies safe systems of work with guidance (but not constant supervision). Planning and Organizing Works with guidance (but not constant supervision) to plan, organize, prioritize and oversee activities to efficiently meet business objectives. Policy and procedures Works with guidance (but not constant supervision) to develop, monitor, interpret and understand policies and procedures, while making sure they match organizational strategies and objectives. Equipment Utilization Works without supervision and provides technical guidance when required on optimizing the utilization of production plant, equipment and materials. Action Planning Works with guidance (but not constant supervision) to develop appropriate plans or perform necessary actions based on recommendations and requirements. Masters Service Conversations Works at a basic level to navigate customer conversations by leveraging the four parts of a service conversation: open, learn, reply, and close. Typically works under close supervision. Navigates Field Service Interactions Works at a basic level to navigate customer interactions in a face-to-face setting, creating positive, defining moments. Typically works under close supervision. Education Upper Secondary School Experience Basic experience of simple office / operational systems (4 to 6 months) Same Posting Description for Internal and External Candidates

Clorox is the place that's committed to growth - for our people and our brands. Guided by our purpose and values, and with people at the center of everything we do, we believe every one of us can make a positive impact on consumers, communities, and teammates. Join our team. #CloroxIsThePlace Your role at Clorox: To ensure safe operation and maintenance of equipment, perform changeovers, set-up equipment, clean and sanitize the equipment, assist in equipment maintenance and repairs. In this role, you will: Adhere to all Safety regulations Conduct assigned Quality Audits/Inspections and accurately complete all associated paperwork to ensure all products meet set quality standards. Ensure proper operation of equipment Maintain current Good Manufacturing Practices (cGMP) Perform line changeovers and set up equipment Follow guidelines for proper cleaning and sanitizing of equipment. Complete equipment maintenance records Complete OEE tracker sheet Ability to use production bill of materials to identify product and components by name and by description necessary to complete scheduled production order. Resolve product and equipment issues and problems Alert the Shift Lead and/or the Business Unit Leader immediately if there are any safety concerns or equipment downtime issues. May train and instruct production associates Recommend proactive action to remedy problems with equipment, componentry, raw materials or product Assist in the mechanical procedures of the production line, including assisting equipment maintenance, repairs, and preventative maintenance Communicate issues out of the norm to Business Unit Leader Maintain excellent team-oriented working relationship among team members. Participate in improvement teams to improve line efficiency, etc. Perform other duties as assigned What we look for: Two (2) years of machining experience with set-up, change-over, shut-down capabilities in a manufacturing environment. Jar or Weckerle line experience required Skill Block 2 or higher required Previous manufacturing experience with adherence to a manufacturing schedule. Physically capable of lifting 50 pounds and Pushing or pulling weight in excess of 1000 pounds with a manual hand truck. High School Diploma required. Some post high school education is preferred. Mechanical aptitude and demonstrated experience fixing equipment strongly preferred (Standard Timing Model Machine). Must achieve minimum required score on Mechanical Aptitude Test (Bennett Test) Demonstrated ability in analytical reasoning skills is required. Demonstrated abilities of resourcefulness, good judgment, attention to details and a strong work ethic are required. Good basic math and reading comprehension skills Must speak and write English Must achieve minimum required score of 4 or greater on each Work Keys tests. We seek out and celebrate diverse backgrounds and experiences. We're looking for fresh perspectives, a desire to bring your best, and a non-stop drive to keep growing and learning.At Clorox, we have a Culture of Inclusion. We believe our values-based culture connects to our purpose and helps our people be the best versions of themselves, professionally and personally. This means building a workplace where every person can feel respected, valued, and fully able to participate in our Clorox community. Learn more about our I&D program & initiatives here. Benefits we offer to help you be well and thrive: Competitive compensation Generous 401(k) program in the US and similar programs in international Health benefits and programs that support both your physical and mental well-being Flexible work environment, depending on your role Meaningful opportunities to keep learning and growing Half-day Fridays, depending on your location Please apply directly to our job postings and do not submit your resume to any person via text message. Clorox does not conduct text-based interviews and encourages you to be cautious of anyone posing as a Clorox recruiter via unsolicited texts during these uncertain times. To all recruitment agencies: Clorox (and its brand families) does not accept agency resumes. Please do not forward resumes to Clorox employees, including any members of our leadership team. Clorox is not responsible for any fees related to unsolicited resumes.

Alliance Industrial Solutions has partnered with a leading promotional product distributor and we are looking for Embroidery Machine Operators to join our fast-paced production team. This is an excellent opportunity for candidates with production experience who take pride in quality craftsmanship and are eager to grow within a supportive, performance-driven environment. This is a full time position located in Durham, NC. Schedule: Monday-Friday 1st Shift: 7:30 AM - 4:00 PM 2nd Shift: 4:00 PM - 12:30 AM Pay & Growth Opportunities: Starting Wage: $16.00/hour (includes training period) Increase to $17.00/hour after meeting a production goal of 30 quality units/hour for 30 consecutive days Promotion to Embroidery Lead ($18.00/hour) available after 90 days of consistent performance and completion of peer training Key Responsibilities: Set up and operate multi-head embroidery machines with proper threads, needles, and materials Interpret design specifications to ensure proper placement and alignment Inspect completed products for quality, addressing any issues promptly Perform routine maintenance, cleaning, and troubleshooting on machines Hoop and prepare garments accurately for embroidery Maintain organized records of machine settings, inventory, and completed work Requirements: High School Diploma or GED (Required) Minimum 6 months of experience in a fast-paced production environment Embroidery or sewing experience a plus Patience - You will have to re-thread needles on the machine many times throughout the day Coachability - You must be willing to learn and able to keep up with training Able to stand for long periods and perform repetitive tasks Strong attention to detail and ability to meet hourly production goals Good communication skills and teamwork mindset Reliable transportation If you are interested in this full time Embroidery Machine Operator position in Durham, NC please apply now!

Are you interested in working in a steady, fast paced production environment with a company that offers a long-lasting career? GKN Automotive is Now Hiring Production Associates for our Plant in Mebane, NC. What would you do? In a production setting, your responsibilities would include organizing and sustaining the work area, optimizing processes to ensure consistent output, and meeting quality and quantity requirements for various part specifications. This involves, using precision measuring tools for accuracy, and fulfilling any additional assigned tasks as needed. Qualifications: ▪ High school diploma or GED ▪ Read and write the English language ▪ Demonstrates willingness to meet production schedules in a cost efficient, profitable, and safe manner. Hours and Pay Rates: *Training on 1st shift but will work on either 2nd or 3rd shift *Will be required to work some weekends 1 st Shift Hours: 7am-3pm Pay: Starting $19/hr $19.50/hr after 90 days $20.50/hr after 6 months 2nd Shift Hours: 3pm to 11pm Pay: Starting $20/hr $20.50/hr after 90 days $21.50/hr after 6 months 3rd Shift Hours: 11pm-7am Pay: Starting $19.90/hr $20.40/hr after 90 days $21.40/hr after 6 months About GKN Automotive: We have been inventing the future for 250 years. A global automotive technology company that pioneered electric drive systems and is now driving the future of transportation. GKN Automotive is the market leader in conventional, all-wheel and electrified drive systems and solutions. With a comprehensive global footprint, we design, develop, manufacture, and integrate an extensive range of driveline technologies for over 90% of the world's car manufacturers. What do we offer? Benefits: Eligible employees may participate in most benefit programs on the first of the month following or coincident with date of hire. • Medical, Dental and Vision Plans • Employer Paid Life and AD&D Insurance • Pre-tax Savings & Spending Accounts (HSAs and FSAs) • Voluntary Benefits- a variety of options • Employer Paid Short- and Long-Term Disability • 401(k) Plan with Employer Match As a global engineering company, innovation is what differentiates us from our competitors and is central to our success. We seek people of different backgrounds, with different skills and perspectives to spark originality, imagination, and creativeness in our teams around the world. GKN Automotive is an equal opportunity employer. We treat all employees and applicants fairly and are committed to ensuring that there is no discrimination or harassment against any employee or applicant on the grounds of age, race, creed, religion, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status or any other characteristics protected by law. We are committed to providing individuals with disabilities reasonable accommodation to participate in the job application or interview process. Please contact us to request any such accommodation: *************************