Machine operator jobs in Baytown, TX

Port-Production Operator Trainee Huntsman is seeking a Port-Production Operator Trainee supporting the Polyurethanes Division located at our Houston Port TEROL site in Houston, Texas. This position will report to the Production Manager, Brian Shepard. Job Scope The Port-Production Operator Trainee will train under a qualified operator to learn and perform all operational tasks required for progression to Operator C within the Houston Port TEROL operation. This role supports safe, efficient, and compliant production activities through adherence to all Operational and EH&S policies, procedures, and practices. In summary, as the Port-Production Operator Trainee, you will: Perform essential Operator C duties in outside operations, including operating, starting up, and shutting down process equipment to produce quality, on-spec products. Maintain a current understanding of unit equipment, operating principles, and process impacts. Conduct routine unit rounds, adjust equipment as needed, and collect product samples for laboratory analysis. Review lab results and adjust operating conditions based on findings. Complete reports, operating logs, work orders, and safe work permits following prescribed procedures. Uphold good housekeeping standards to ensure a clean, safe, and orderly work environment. Monitor the safe handling, identification, storage, and removal of waste streams. Complete all assigned training and participate in site safety and environmental programs. Maintain regular workplace presence and work extra hours or overtime when required to support production needs. Collaborate effectively with team members and support broader Huntsman goals and initiatives. Qualifications You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. The candidate must have an unrestricted right to work for Huntsman in the United States. Minimum Qualifications Education Required: Associate degree (2+year) in Process Technology, or High school diploma plus 6-12 months of experience in a petrochemical plant. Experience Required: 0-12 months of related experience. Certifications/Licenses: None required. Skills and Knowledge Candidates must demonstrate: Strong commitment to safety, environmental compliance, and operational discipline. Ability to learn and apply technical processes and operating procedures. Teamwork, communication, and the ability to work collaboratively with diverse colleagues. Attention to detail in monitoring equipment, collecting data, and maintaining accurate documentation. Dependability, including consistent attendance and willingness to work overtime when needed. Preferred Qualifications Prior experience in a petrochemical or manufacturing environment. Familiarity with process operations, equipment monitoring, or industrial safety programs. Working Environment Work is performed in an industrial chemical production environment. Requires ability to work outdoors in varying weather conditions. Requires standing, walking, climbing stairs/ladders, and wearing all required PPE. Must be able to work overtime or extra hours to support production demands. Huntsman is proud to promote equal opportunity in the workplace All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, national origin, disability, age, or any other protected characteristic. All unsolicited resumes presented by recruitment agencies are treated as pro bono information or service and will not be compensated. Huntsman is aware of scams involving fraudulent job offers. We do not make job offers until after a candidate has submitted a job application and has participated in an interview. Please be advised that any job offer that requires payment or requires you to deposit a check is likely a scam. If you have questions about any open positions at Huntsman or Rubison, please visit our Careers website at ******************************************** Additional Locations:

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production OperatorThis position is responsible for daily operations of the production floor; ensuring the shift meets established safety, quality, and production goals in compliance with all applicable legal and food safety requirements. Essential Functions Responsible for daily activities of the production line(s), ensuring product adheres to Niagara's standard of safety, quality, and throughput. Accurately completes applicable quality and production reports hourly. Physical and visual inspection of product is required to prevent non-conforming goods. Correctly reports all quality defects to the appropriate team members and shift leadership. Adheres to the highest standards of company and plant safety programs, guidelines, rules, and regulations. Abides by Niagara's Good Manufacturing Practices (GMP) and Food Safety Standards at all times. Maintains general housekeeping in all areas of production and additional areas assigned by plant leadership. Maintains appropriate level of raw materials as required, to ensure production lines incur minimal downtime. Demonstrates the aptitude and skill to work in all assigned areas of production; troubleshoots minor production line issues and performs relief duties when required. Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule or schedule as dictated by production demand. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Benefits *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Job Details Experienced Humble-Shop - Humble, TX Full Time Not Specified None Any Skilled Labor - TradesDescription Employee Value Proposition Working for a world-class leader in building structures and bridges, a Schuff Steel HMO-A brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the field of forming material by operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C classification. The HMO-A utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge and understanding of CNC machine programs. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career. Core Responsibilities Layout, read, interpret blueprints, shop drawings and other company documents. Operates heavy steel fabrication machinery according to company requirements. Load and unload equipment with material manually and through the use of an overhead crane or magnet. Perform daily preventative maintenance. Troubleshoot, properly mark and stamp materials. Perform daily cleaning of machines. Locate parts and supplies for machine operation and grind material. Other duties may be assigned. Perform other routine duties per management direction. Must adhere to and follow all safety rules and PPE requirements Education/Training - Work Experience High school diploma or general education degree (GED), and/or 12 months experience; completion of a closely related vocational training course through an accredited school may substitute for the required experience Specialized Knowledge - Certificates & Licenses Equipment Knowledge & Skills - includes the operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C Classification. Overhead cranes and forklifts Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: None DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan *Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at **************. Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.

Job Description We're seeking a Manual Grinding Operator to join a precision manufacturing team in Houston, TX (77003). The ideal candidate has hands-on experience with manual cylindrical grinding machines and takes pride in delivering top-quality, tight-tolerance work. What You'll Do Set up and operate manual OD and/or ID grinders (examples: Cincinnati, Landis, Norton, Okamoto, Toyoda). Grind and finish cylindrical parts to exact customer specifications. Use micrometers, gauges, and blueprints to ensure dimensional accuracy. Report deviations and assist with process improvements. Perform basic liquid penetrant inspections when required. Operate jib and overhead cranes safely. Conduct routine maintenance and keep your workstation organized. Participate in ongoing training and demonstrate steady progress toward independent operation. What We're Looking For Strong background in manual grinding (not CNC-only). Ability to read and interpret technical drawings and measurements. Detail-oriented, safety-conscious, and dependable. Experienced Operators: 1+ year of grinding or machining experience. Trainees: High school diploma or GED; 4 weeks of paid, supervised training provided. Must have (or be willing to acquire) personal hand tools - payroll deduction program available. Pay & Advancement Hourly Rate Based on Skill Level: LevelHourly RateExpert$37.00Spec+$35.00Specialist$33.00Tech+$31.00Tech$29.50A+$27.50A$26.00B+$24.00B$22.50C+$21.25C$20.00 Pay is determined by experience, hands-on skill, and performance evaluations. Training & Evaluation Minimum four (4) weeks of on-the-job evaluation. Continuous feedback and development with opportunities for pay increases based on skill demonstration. Felony-Friendly Employer* *Note: This employer values rehabilitation and opportunity. Candidates with non-violent, non-theft felony convictions are encouraged to apply.

The Machine Operator is a team member in the day-to-day operations of the company's manufacturing facilities. Their work must adhere to all quality, safety, and efficiency policies. The Machine Operators report to the Production Manager, however for day-to-day guidance relative to plant operations, Machine Operators report to their Team Leader. Job Duties/Responsibilities Effectively and efficiently operate manufacturing equipment Diligent reporting of safety, quality, maintenance, or other issues to ensure important improvement ideas are communicated Execute quality inspection, and set-up checklists Complete documentation thoroughly and accurately Report and document product quality non-conformances immediately. Complete assigned preventive maintenance tasks (lubricating, cleaning, etc.) Cross-train in all areas of operation Identify and report equipment issues (look, listen, feel) to prevent equipment breakdown or failure Participate in improvement initiatives related to safety, quality, and efficiency in area of responsibility Develop a Lean Manufacturing mindset, focused on removing waste in operations to deliver quality products at lower cost Maintain high standards of housekeeping are sustained Ensure all tools, materials & equipment are stored in designated area Other duties as assigned. Skills/Knowledge Prior experience in a manufacturing or similar environment an asset Able to change task or direction while maintaining organization Good organizational skills Forklift experience an asset Ability to lift 45lbs unassisted High attention to detail Analytical thinker and problem-solving capabilities Ability to work in a team environment. Education High School Diploma or equivalent. Experience Will train perspective candidates 1+ year of manufacturing experience preferred. About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum's products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

WHO ARE WE Global Healing Center is a leading manufacturer, distributor, and retailer of healthy living products, nutraceuticals, and dietary supplements specializing in cleansing and detoxification. Our mission: provide access to natural health information and products that revolutionize one's journey to better health. JOB DESCRIPTION The Production Line Operator plays a crucial role in overseeing the setup, operation, and upkeep of production line equipment. This role demands a keen eye for detail and a commitment to upholding product quality standards while ensuring the efficiency and seamless operation of the production process. Key responsibilities include supplying raw materials to machinery, conducting product inspections, maintaining equipment, and adhering to established safety protocols. The Production Line Operator will possess technical proficiency, meticulous attention to detail, and the ability to excel under pressure within a fast-paced setting. Additionally, the Production Line Operator should exhibit strong teamwork skills and the capacity to execute basic troubleshooting and machinery repairs. Requirements Operate Equipment: Run machines and ensure they are operating efficiently, monitoring their performance throughout the production cycle. Feed Raw Materials: Load raw materials into machines to begin production and ensure an uninterrupted workflow. Test Products: Check finished products to ensure they meet established quality standards and specifications. Maintain Equipment: Perform minor repairs, replace parts, and troubleshoot malfunctions to keep the production line running smoothly. Follow Safety Procedures: Adhere to safety protocols, ensuring a safe working environment, and report any safety hazards or concerns. Record Data: Keep accurate records of production data, including quantities produced, machine performance, and any incidents or deviations from normal operations. Clean Work Areas: Maintain cleanliness in the production area, keeping it free from hazards and ensuring compliance with safety regulations. Package Products: Package finished products for storage or shipment, ensuring products are properly secured for distribution. Attach Labels: Apply appropriate labels, including product information and company logos, to finished products before shipment. Skills: 2+ years of experience in a Production Operator position or job title with similar responsibilities High School diploma or GED equivalence Must be able to lift and carry up to 50lbs Must be able to stand for long period of time Strong attention to detail Ability to collaborate and work well with others in a team environment Dexterity and manual skills to handle equipment and materials Ability to observe and record production data accurately Effective verbal communication skills for reporting issues and collaborating with the team Strong problem-solving skills to identify and resolve equipment malfunctions and production issue Bonus: Cgmp course and certification Arizona Food Handlers Card Lean Six Sigma Yellow Belt * Other courses, classes and certifications might be suggested from direct managers * Benefits Paid Time Off (PTO); Company covered health, dental, vision, and life insurance; 5% 401(k) match plus an additional 4%; Wellness Bonus Employee store credit; Company sponsored events; Fun team-building activities.

Journeyman-level or equivalent experience in heavy equipment operation Minimum 3-5 years of recent, relevant industry experience operating multiple types of heavy equipment. High school diploma or equivalent; associate's degree or higher preferred Valid driver's license; CDL Class A preferred or required for some positions Preferred Education/Training/Experience Previous teaching or supervisory experience Computer literacy and ability to use instructional technology Experience with equipment maintenance and minor repairs Minimum Knowledge & Skills Maintain training equipment and ensure it is safe and operational; report or perform minor repairs as needed Coordinate and manage classroom/lab activities, ensuring a clean and organized learning environment. Stay current with industry trends, equipment technology, and regulatory requirements Preferred Knowledge & Skills Ability to develop and implement lesson plans, instructional materials, and assessments in accordance with industry Demonstrate and supervise the proper use of equipment, emphasizing safety procedures, PPE, and OSHA regulations Participate in curriculum development, program improvement, and professional development activities Job Duties Instructor is responsible for teaching and training students in the safe and effective operation of heavy equipment such as bulldozers, excavators, loaders, backhoes, and related machinery. The instructor develops and delivers curriculum, ensures compliance with safety standards, and prepares students for industry certifications and employment Licensing/Certification Requirements National Commission for the Certification of Crane Operators (NCCCO) Specialized Equipment Certifications Technical Skills Assessment Program (TSAP) Certification Forklift Operator Certification Physical Requirements Instructors should be physically capable of operating equipment, performing demonstrations, and assisting students in a hands-on setting Operators must be able to exert 50-100 pounds of force occasionally, 25-50 pounds frequently, and 10-20 pounds constantly to lift, carry, push, pull, or move objects such as tools, equipment parts, and construction materials The job requires frequent bending, stretching, twisting, reaching, and climbing in and out of machinery Operators must be able to move through a full range of motions and maintain balance and coordination while operating equipment, sometimes on rough or uneven terrain Heavy machine operators must be physically fit to endure strenuous work, including standing, walking, or sitting for long periods, and working in extreme weather and challenging environments Excellent hand-eye and foot coordination are necessary for manipulating multiple controls, steering, and operating various machines safely and efficiently Fine and firm grasping, as well as the ability to make fast, repeated movements, are required The role often involves exposure to vibration, noise, dust, and outdoor elements, as well as occasional risks from working around moving equipment and hazardous materials Posting Detail Information Posting Number F273P Candidates that are eligible apply Internal/External Special Instructions to Applicant Minimum Salary Range $48.75/hr Mid Point Salary Range $48.75/hr Maximum Salary Range Posting Open Date 05/21/2025 Posting Close Date Open Until Filled Yes Quick Link for Direct Access to Posting ********************************** EEO Statement College of the Mainland is an affirmative action/equal opportunity institution and does not discriminate on the basis of race, color, sex, age, national origin, religion, disability or veteran status. College of the Mainland does not discriminate on the basis of disability in the recruitment and admission of students, the recruitment and employment of faculty and staff, and the operation of its programs and activities, as specified by federal laws and regulations within Section 504 of the Rehabilitation Act of 1973 and the Americans with Disabilities Act of 1990 and 1992.

**We Create Products and Brands That People Trust to Clean, Sanitize, and Protect Their Homes and Pools** When you join KIK Consumer Products, you're joining a team that cares about the work we do and about each other. We bring exceptional brands and products to consumers that help them protect the health and wellness of their families and the cleanliness of their homes and pools. We are committed to building a culture of performance driven by accountability, collaboration, and agility that enables timely fact-based decision-making and exceptional execution with unwavering ethics. As one of North America's largest independent manufacturers of consumer products, KIK helps a large portfolio of brands and retailers bring their products to life. **Your Role at KIK** Join our team as an experienced Machine Operator managing production equipment including fillers, case packers, capers, case sealers, palletizers and labelers. The scope of this role is to ensure the efficient and accurate filing of products into containers, adhering to specific volume and weight requirements, and maintain the highest standards of quality and filler operator works with the packaging end of a production line. The filler operator also operates filling machines and makes the necessary adjustments to ensure consistency. This is a 3 rd shift position, 10:00pm-6:30am Monday-Friday and overtime on Saturdays as required. The pay is $22/hr.

Job Details Experienced HOPPER - TOMBALL, TX Full Time Not Specified None Any ManufacturingDescription Job Title: Robot Operator Reports to: Robot Operator Supervisor Job Type: Hourly, Non-Exempt SUMMARY: Loads and unloads parts in jigs for production robots. REQUIRED COMPETENCIES Loads and unloads parts in jigs for production robots. Helps setup jigs for job changes. Uses start boxes to generate program start/stop Visually inspects parts per sample and per Supervisor. Follows Supervisor directions. Performs general daily maintenance on equipment. Operates forklifts. Upkeep and cleanliness of work areas. Follow company safety & security guidelines Attendance and punctuality are essential functions of this job. Other duties as needed. QUALIFICATIONS To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required DESIRED EDUCATION and/or EXPERIENCE Previous experience On the job training to be provided, as needed, for all assigned responsibilities. PHYSICAL DEMANDS Employee may be required to do the following: climbing into and out of equipment; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands, fingers and feet to operate tools and equipment; lifting up to 40 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction. The employee is frequently required to sit while performing the duties of this job (approx. 20%) walk (70%) stand (10%) sit. The employee is expected to lift or move materials (40% of workday) MENTAL DEMANDS Employee may be required to do the following: following set procedures and standards; applying basic mathematical skills; planning work and selecting proper tools; reading and interpreting information; judging distances and accurately; following oral and/or written directions; reading; writing; ability to recognize and report safety hazards WORK ENVIROMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is moderately loud. The individual who occupies this position must not pose a direct threat to the health or safety of such individual or others in the workplace. This means the individual must not pose a significant risk of substantial harm to the health or safety of the individual or others that cannot be eliminated or reduced by reasonable accommodation. The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Duties may be assigned and/or reassigned as needed and/or instructed by department manager, general manager or other supervisor. M / F / Disability /Veteran / EOE **********DRUG FREE WORKPLACE******* “FabCorp/Hammonds is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, sexual orientation and gender identity, status as a protected veteran, or disability.”

Job Description Machine Operator - Night Shift - $18.50/hour plus $1.00/hr shift differential - 6:00pm-2:00am Monday thru Friday Who we are looking for: We are currently looking for a Machine Operator - Night Shift - $18.50/hour plus $1.00/hr shift differential - 6:00pm-2:00am Monday thru Friday to be based out of Houston, TX. Reporting to the night shift Supervisor, the Machine Operator will be responsible for performing various tasks to set up, operate, monitor, and troubleshoot on assigned machines. The Machine Operator will also be responsible for inspecting parts to specifications and making adjustments, or tool changes as necessary to maintain quality specifications. The Operator sets up and operates a production machine in accordance with established procedures and guidelines. What you'll do: Additional Responsibilities include, but are not limited to: Ability to work in a fast-paced, high-speed environment, follow standardized work and adhere to safe work practices in a continuous improvement environment Sets up and operates a production machine in accordance with established procedures and guidelines. Reads and interprets blueprints and diagrams to select, position and secure machinery. Adjusts machine settings to complete tasks accurately, according to specifications and in a timely fashion. Performs necessary pre-operation activities to ensure proper equipment startup and operation on multiple pieces of equipment Operates/monitors multiple pieces of equipment during operation to ensure quality production and minimal unplanned stops Communicates with team members and support teams to ensure continuous production of the correct product at high quality levels with minimal wasted time and materials Completes documentation including daily production reports, regular quality inspections, and safety inspections of equipment What you'll bring: Experience as a Machine Operator a plus Experience in a manufacturing environment is a plus Knowledge of Production Procedures High school diploma or equivalent preferred Ability to Read Blueprints, Schematics and Manuals Attention to Detail Teamwork Work Independently Multitask Within 3 months, you'll: Complete any required training Have developed relationships with the key stakeholders for this role. Be well-versed in Atkore's Business System and the importance of your role to daily operations. Who we are: Atkore is a five-time Great Place to Work© certified company and a three-time Top Workplaces USA award winner! We're committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $18.50/hour. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: Medical, vision, and dental insurance Life insurance Short-term and long-term disability insurance 401k Paid Time Off Paid holidays Any leave required under federal, state, or local law Benefits are subject to vesting and eligibility requirements. Applications are being accepted on an ongoing basis.

Machine Shop Operator Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program. Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed. Review parts program file and select set tools in tool holder, turret, or cross slide location. Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required. Unload bar stock from delivery truck with overhead crane and place in intermediate storage area. Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications. Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear. Indicate work to detect and eliminate run out. Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism. Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor. Maintain workplace in neat and orderly condition. Qualifications/Requirements GED or High School Diploma 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

/OBJECTIVE: Safely and efficiently operate equipment in a work environment that requires PPE to process thermoplastic materials into products used in downstream processes while meeting specification and production requirements. ESSENTIAL FUNCTIONS Maintain safe and clean work environment Effectively and efficiently communicate with employees and management to meet production demands Safely and consistently operate process and mechanical equipment such as injection press, grinder, oven and other equipment as required Effectively utilize measuring tools such as scales, calipers and other tools as required Adhere to company policies, standard work procedures and job safety standards, including required PPE Support preventative maintenance program efforts Accurately input data to the MRP system Proficiently produce products within specifications and production requirements Maintain product identification and traceability Visually inspect materials for quality issues and defects Use judgement skills to resolve immediate issues for production operations Support root cause investigations and corrective action activities as delegated Other Requirements Transport materials to and from designated areas Maintain housekeeping as designated Support compliance with Health, Safety and Environmental policies Effectively work in a teamwork environment with internal and external resources Support internal, external, and quality audits Effective time management and organizational skills Perform other related duties as assigned by supervisor Ability to function independently while meeting deadlines Assist in providing on the job training Basic oral and written communication Basic computer and arithmetic skills Required Education and Experience High school diploma or equivalent or 0 - 3 years of related experience Physical Demands Must be able to complete work needing hand dexterity, standing, sitting, bending, kneeling, pushing, pulling, reaching, squatting, and climbing Able to consistently lift and push up to 50 pounds Must have 20/20 vision or corrective lenses

HMT is looking for a Machine Operator for the Tomball, TX location. The Machine Operator will be responsible for metal fabrication using manufacturing processes such as shearing, stamping, punching, bending, slitting, grinding, manual operations, etc. Tasks include operation and control of power &brake presses and auxiliary equipment in compliance with HMT requirements. Job performance must aid attaining TDC key performance indicators for safety, quality, delivery and cost. Role Responsibilities: Produce parts made from plastics, stainless and carbon steel, aluminum and other materials by operating power & break presses for punching, cutting, forming, bending, slitting, etc. ensuring compliance with requirements. Setup and operate machinery according to work order, safety and performance procedures and expectations. Install workpiece stoppers, guides and any other auxiliary equipment required; control material flow IN/OUT. Carry out production ensuring that established features to the form, fit and function of the product are achieved during stamping process. Perform setup/ change-over applying the single minute exchange die (SMED) procedure. Monitor work piece quality on each operation by submitting 1st piece and the subsequent 100th pieces for inspection in compliance with TDC inspection-testing procedures. Operate machinery to the full capacity and report any issue that can result in machine sub-utilization. Maintain WIP & finished product identified regarding inspection status & traceability by placing TAGs/labels on pallets and crates indicating purchase order, part number, work order, date, quantity, etc. Fill paperwork timely by adding production output data to the routers, stating time, dates, quantities, approvers etc.; make sure info is accurate, clear and complete. Identify and segregate any nonconforming product and notify supervisor for determining further actions. Carry out daily preventive maintenance and inspection to machinery, tooling and auxiliary equipment, including trucks following the customized check lists; report any item noticed out of compliance from OSHA and company regulations. Dispose scrap, broken pallets, lubricants and other chemicals timely, using allotted containers/dumpsters as indicated by HMT procedures. Sort, set in order and clean tools, shadow boards, machinery, floors, cabinets, transportation carts, etc. in compliance with 5S program and the weekly tasks schedule. Other tasks as required by HMT management. Qualifications Required: High school or vocational training, preferable. 1-3 years of experience in manufacturing environment preferably sheet metal fabrication. Demonstrated ability to read and interpret basic engineering drawing. Maintain daily production performance above 90%. Successfully completed forklift training. Ability to communicate read and understand in the English language. Background and Drug Testing PHYSICAL REQUIREMENTS: The physical demands must be met by an employee to successfully perform essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Ability to work in extreme temperatures' (cold or heat). While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to finger, handle, or feel and reach with hands and arms. The employee frequently is required to walk, stoop, kneel, climb, carry, pushing/pulling and use repetitive wrist and hand movements. The employee may be required to lift and/or move objects of up to 50 pounds. Hearing and seeing ability of rapid mental coordination. It is required to be mentally alert for the entirety of shift. About HMT HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Job DescriptionDescription: JACQUET is an established market leader in the distribution of stainless steel and nickel alloys in plate and round bar. Jacquet strives to be the best supplier of stainless steel and nickel cut parts by providing high quality in-house processing. Metals are sold either as-is or cut to made-to-measure sizes using plasma machines, water jets, lasers or saws. Jacquet applications cover many industrial sectors such as the water, environment, energy, mechanical and forged metal construction, chemical and agri-food, gas processing and storage, pharmaceutical and cosmetic sectors. We have four strategically placed locations within the US including Pennsylvania, California, Texas, and Wisconsin with many more globally. We are currently seeking an experienced Machine Operator for 1st shift at our Houston, TX facility. We offer training, competitive pay, and a comprehensive benefits package. If you have the necessary skills and qualifications, we would enjoy the opportunity to speak with you! Description: The machine operator is responsible for the safe operation, maintenance, and cutting of stainless steel and nickel alloys per customer specifications. Responsibilities: Take primary responsibility for operation and maintenance of the plasma machine to include Production, Quality, accuracy of Production Logs, and BT/Travelers/Programs. Perform daily, weekly, and monthly maintenance as needed. Assist maintenance whenever requested or directed. Monitor your machines' consumables. Cut and remove scrap. Report any deficiencies. Use plates, bars, rems, and programs as specified by Production Control. Prior approval for any changes. Work with QA department on all matters of quality to include quality of cut parts, cutting tolerances, quality statistics and ISO 9000 certification. Ensure that safe work practices are maintained always within your work section and always adhere to safety requirements and wear required protective equipment. Control the neat, orderly and accurate storage of all bar inventory in the plant. Organize the work area of your machines. All tools should be put away in an orderly manner. Maintain and constantly improve upon the cleanliness of your section. Perform other reasonable tasks as requested by the Operations Manager or the floor supervisor. Requirements: Minimum 18 years High School Diploma or Equivalent Ability to read and write English Ability to stand, sit, bend, stoop, and reach Ability to lift 50 lbs. Other Skills: Attention to detail Team player Basic familiarity with computers/software programs Experience: 1+ years prior experience with machine operations 1+ year(s) prior experience operating an overhead crane 1+ year(s) prior experience operating a forklift Minimum Additional Training: Experience in math and statistics Pay Range: commensurate with experience Requirements:

Job Description Manufacturing Machine Operators! Do you have production and Machine Operation experience? We are looking for you! We need full-time Machine Operators that will learn to operate paper converting machinery in the production of bath tissue and paper towels. The position is located in Conroe, TX. Must be able to work 12 hour shift rotation, weekends and holidays! Shift hours are 6:00 - 6:30. This role is key to our production and if you have the experience in manufacturing and can maintain a strong focus on Safety, Quality and Efficiency we want you! The production area is climate controlled. RESPONSIBILITIES Operate and maintain production machines in a paper converting line. (Rewinders, unwinders, wrappers, palletizers, case packers, etc.) Ability to adhere to Safety Policy and Procedures a must! Complete work orders and requests in a timely fashion. Load raw materials (Parent Reels, Poly Rolls, Core Materials) by using overhead crane, pallet jack, etc. Monitor equipment, perform resets, replenish and troubleshoot assigned area of the line as needed. Determine and report downtime, pallet counts, machine speeds, etc. Maintain cleanliness of equipment and assigned areas. Monitor line for defective materials and perform quality checks. May operate automated packaging equipment. QUALIFICATIONS Education: High school diploma or equivalent required. Experience: 3 to 5 years of machine operation experience required. Manufacturing experience preferred. Skills: Strong mechanical aptitude, attention to detail and ability to work independently or with a team! Physical: Must be able to work 12 hour shifts standing, bending, stooping and lift up to 25 lbs. Excellent attendance record (the schedule is the 2-2-3 schedule) Strong attention to detail. Ability to work a Rotational work schedule (Days and Nights) including weekends and holidays. Ability to complete background check and pre- employment drug and alcohol testing requirements. We offer: Full benefit package (Medical, Dental, Vision, LTD, STD, Life Insurance). PTO and Vacation. Career Advancement. Job Posted by ApplicantPro

Job Details Experienced Humble-Shop - Humble, TX Full Time Not Specified Any Skilled Labor - TradesDescription Employee Value Proposition Working for a world-class leader in building structures and bridges, a Schuff Steel HMO-C brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the field of forming material by operation of non-CNC machines and equipment such as Saw, Punch, Shear, Beam Splitter and Threader. Also assists HMO A's and B's with their equipment. The HMO-C utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge and understanding of non-CNC equipment and machines To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career. Core Responsibilities Layout, read, interpret blueprints, shop drawings and other company documents. Operates heavy steel fabrication machinery according to company requirements. Load and unload equipment with material manually and through the use of an overhead crane or magnet. Perform daily preventative maintenance. Troubleshoot, properly mark and stamp materials. Perform daily cleaning of machines. Locate parts and supplies for machine operation and grind material. Keeps work area organized and clean. Transport material by a crane as needed and required. Must adhere to and follow all safety rules and PPE requirements Education/Training - Work Experience High school diploma or general education degree (GED), and/or 12 months experience; completion of a closely related vocational training course through an accredited school may substitute for the required experience Specialized Knowledge - Certificates & Licenses Equipment Knowledge & Skills - includes the operation of non-CNC machines and equipment such as Saw, Punch, Shear, Beam Splitter and Threader. Also assists HMO A's and B's with their equipment. Overhead cranes and forklifts Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: None DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan *Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at **************. Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.

We Create Products and Brands That People Trust to Clean, Sanitize, and Protect Their Homes and Pools When you join KIK Consumer Products, you're joining a team that cares about the work we do and also about each other. We bring exceptional brands and products to consumers that help them protect the health and wellness of their families and the cleanliness of their homes and pools. We are committed to building a culture of performance driven by accountability, collaboration, and agility that enables timely fact-based decision-making and exceptional execution with unwavering ethics. As one of North America's largest independent manufacturers of consumer products, KIK helps a large portfolio of brands and retailers bring their products to life. Your Role at KIK Join our team as an experienced Machine Operator managing production equipment including fillers, case packers, cappers, case sealers, palletizers and labelers. The scope of this role is to ensure the efficient and accurate filing of products into containers, adhering to specific volume and weight requirements, and maintain the highest standards of quality and filler operator works with the packaging end of a production line. The filler operator also operates filling machines and makes the necessary adjustments to ensure consistency. This is a 3 rd shift position, 10pm-6:30am Monday-Friday and overtime on Saturdays as required. The pay is $17.5/hr. What You'll Bring High School diploma or GED required 1 or more years of experience in machine operating/Filling required Ability to stand and walk for extended periods of time Ability to sit, kneel, bend at waist, reach and extend arms Must have good manual dexterity Must wear PPE What You Will Get KIK offers a competitive salary and comprehensive benefits including health, wellness, dental, vision, life, and disability insurance. You can plan for your future with KIK's retirement savings options including employer match. KIK also recognizes the importance of continuing education and offers Education Assistance to our employees to encourage continued personal development and growth. About KIK We create the products and brands that people trust to clean, sanitize, and protect their homes and pools. We are one of North America's largest independent consumer product manufacturers with 16 North American manufacturing facilities. We also operate globally in Canada, Europe, and Australia. We are known for our portfolio of notable brands including Spic and Span and Comet cleaning products, Clorox Pool&Spa™ (under license), BioGuard , and Natural Chemistry pool chemicals. We are also the #1 producer in North America of store-brand (“private label”) bleach and a leading private-label provider of laundry detergent and additives, dishwashing products, general-purpose cleaning, and other home care products. Our global team of over 2,300 employees drives our capabilities in product development, product formulation, strategic sourcing, manufacturing, packaging design, brand marketing, project management, quality assurance, compliance, distribution, and logistics. Our organization is constantly evolving and is driven by a set of “One KIK” values - a dedication to following through on commitments in a customer-focused, profit-motivated way; while never compromising on safety, ethics, or integrity. KIK is an Equal Employment Opportunity / Affirmative Action employer. KIK does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information or any other status protected by law. KIK is also committed to providing reasonable accommodations for applicants and employees with protected disabilities to the extent required by applicable laws. If you require a reasonable accommodation to participate in the job application, or interview process, or to perform the essential functions of the job, please contact Human Resources immediately. Privacy Policy: ************************************************ What You'll Be Doing Quality Checks: Ensuring that quality requirements are met through timely and accurate checks. Basic Math: Utilizing a computer and calculator for basic math calculations and measuring dimensions accurately. Safety: Using maintaining, and caring for personal protective equipment (PPE) Communication: Effectively communicating with management and team members. Teamwork: Collaborating with Team members to streamline production process and improve efficiency. Attention to Detail: Being detail-orientated and having a thorough understanding of production and procedures. Maintain time and production records.

Machine Shop Operator Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program. Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed. Review parts program file and select set tools in tool holder, turret, or cross slide location. Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required. Unload bar stock from delivery truck with overhead crane and place in intermediate storage area. Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications. Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear. Indicate work to detect and eliminate run out. Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism. Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor. Maintain workplace in neat and orderly condition. Qualifications/Requirements GED or High School Diploma 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.