Machining engineer jobs in Mack, OH

Immediate need for a talented PCB Design Engineer. This is a 11+ months contract opportunity with long-term potential and is located in Cincinnati, OH(Onsite). Please review the job description below and contact me ASAP if you are interested. Job ID: 25-94418 Pay Range: $55 - $58/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Requirements and Technology Experience: Key skills; PCB, Design Validation, Embedded Systems Development and qualification of electromechanical components such as Switch assemblies, cable assemblies, PCBAs. Understand Measurement Systems analysis and understanding of establishing calibration requirements. Work with suppliers to meet established cost, quality, and performance requirements. Work with suppliers on component qualification activities and monitor the execution. Understand and conduct Design of Experiments, Process Stability / Control / Capability methods, etc. for process characterizations/mfg./equipment development Effective communication with suppliers on design requirements and process capability needs Position may require up to 30% travel both domestic and international. Board Bring-up Design review, DFMEA, DFM & Board Revision Low-level Embedded drivers development for on-board peripherals & Motor control Schematics & BOM updates for PCBAs Write Module test plan and execution Writing Engineering Studies for board level & device level testing Design Transfer Test Engineering scope: Writing Test Specs for ICT/ FCT Liaison technical discussions between supplier & design team and resolve stumbling blocks Design review of Hardware & fixture for Functional Testers ICT/ FCT Qualification and deployment on plant Our client is a leading IT Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Note: Looking for USC / GC We are seeking an experienced PCB Design Engineer to support the development, qualification, and test engineering of electromechanical medical device components. This role involves hands-on PCB design, board bring-up, supplier collaboration, design transfer, and manufacturing test readiness in a regulated environment. Key Responsibilities PCB Design & Hardware Development Design and develop PCBAs for electromechanical components including switch assemblies and cable assemblies. Perform schematic design, BOM creation, and updates for PCBAs. Support board bring-up, debugging, and board revisions. Conduct design reviews, DFMEA, DFM, and implement design improvements. Develop low-level embedded drivers for on-board peripherals and motor control. Supplier Collaboration & Qualification Work closely with suppliers to meet cost, quality, and performance targets. Lead and monitor component qualification activities with suppliers. Communicate design requirements and process capability expectations effectively. Act as a technical liaison between suppliers and internal design teams. Manufacturing & Process Engineering Apply Measurement System Analysis (MSA) and establish calibration requirements. Conduct Design of Experiments (DOE), process stability, control, and capability studies. Support process characterization, manufacturing readiness, and equipment development. Lead design transfer from development to manufacturing. Testing & Validation (Test Engineering Scope) Write and execute module-level test plans. Develop engineering studies for board-level and device-level testing. Create test specifications for ICT (In-Circuit Test) and FCT (Functional Circuit Test). Review and approve hardware and fixture designs for functional testers. Support ICT/FCT qualification and deployment at manufacturing plants. Troubleshoot test issues and resolve technical roadblocks during deployment. Required Skills & Qualifications Strong experience in PCB design and board bring-up. Hands-on knowledge of DFMEA, DFM, DOE, MSA, and process capability methods. Experience working with ICT/FCT test development and qualification. Familiarity with embedded systems and low-level driver development. Strong supplier management and cross-functional communication skills. Experience in regulated industries (medical devices preferred). Nice to Have Experience with motor control systems Prior exposure to Johnson & Johnson or medical device standards International supplier collaboration experience

We're looking to hire a talented Lead Engineer I or a Process Engineer II with experience in oral solid dosage to help develop innovative treatments for chronic diseases. Apply today-this is your chance to make a real impact in healthcare! Relocation assistance is available! Pay: $95k-$115k for the Lead Engineer I $85k-$100k for the Process Engineer II Location: Wilmington County, Ohio Responsibilities: Support the scale-up and transfer of oral solid dosage formulations and processes to the production facility Design and recommend equipment purchases Troubleshoot and maintain manufacturing systems, processes, and equipment Identify and implement process and equipment improvements Develop and implement SOPs Author high-quality technical protocols/reports (engineering studies, summary reports, equipment specifications, change controls, and investigations) Requirements: Lead Engineer I: BS degree in Engineering or technical discipline 5+ years of OSD pharmaceutical experience Experience with OSD equipment procurement Knowledge of cGMP, OSHA, EPA and FDA facility requirements and regulations Knowledge of OSD operations, statistics, equipment design, process control, process scale-up, and equipment validations Experience in statistical analysis Process Engineer II: BS degree in Engineering or technical discipline 2-5 years of OSD pharmaceutical experience Experience with OSD equipment procurement Knowledge of cGMP, OSHA, EPA and FDA facility requirements and regulations Knowledge of OSD operations, statistics, equipment design, process control, process scale-up, and equipment validations Experience in statistical analysis We strongly encourage candidates who have some of the skills to apply. We look forward to a conversation to learn more about you!

We are seeking a Senior Databricks Engineer with deep hands-on experience designing and implementing large-scale data solutions on Azure Databricks. The ideal candidate has real-world experience building and troubleshooting production-grade data pipelines, optimizing Spark workloads, managing Delta Lake architecture, and implementing DevOps best practices using IaC and CI/CD automation. Key Responsibilities Design, develop, and maintain data pipelines and ETL solutions in Azure Databricks using PySpark and Delta Lake. Implement data integration frameworks and API-based ingestion using tools like Apigee or Kong. Analyze, design, and deliver enterprise data architecture solutions focusing on scalability, performance, and governance. Implement automation tools and CI/CD pipelines using Jenkins, Ansible, or Terraform. Troubleshoot production failures and performance bottlenecks - fix partitioning, caching, shuffle, cluster sizing, and Z-ordering issues. Manage Unity Catalog, enforce data security (row/column-level access), and maintain data lineage. Administer Databricks clusters, jobs, and SQL warehouses, optimizing costs through auto-stop, job clusters, and Photon usage. Collaborate with cross-functional teams to drive data strategy and standards across domains. Create and maintain detailed architectural diagrams, interface specs, and data flow documentation. Mentor junior engineers on Databricks, Spark optimization, and Azure data best practices. Required Skills & Experience 5+ years of experience as a Data Engineer with strong hands-on experience in Azure Databricks and PySpark. Solid understanding of Delta Lake, Z-ordering, partitioning, OPTIMIZE, and ACID transactions.

Senior Mechanical Engineer (PE) - Industrial & Commercial HVAC/Process Systems KODIAK Construction Recruiting & Staffing Cincinnati Metropolitan Area (On-site) Senior Mechanical Engineer (PE) - Industrial & Commercial HVAC/Process Systems in Cincinnati, OH We're hiring a licensed Mechanical Engineer (PE) with deep expertise in hydronic systems-water and steam boilers, chilled water, and full HVAC system design-for complex industrial and commercial environments. This role owns the design, analysis, and stamping of mechanical systems while supporting project managers, sales, and field operations to deliver code-compliant, construction-ready solutions. Key Responsibilities Lead mechanical and hydronic system design for design-build projects. Review, seal, and approve permit-ready drawings (Ohio PE required). Provide engineering oversight and mentor junior designers. Ensure all designs meet IMC, IFGC, ASHRAE, and energy code requirements. Develop calculations and system models using Carrier HAP, AutoCAD, Revit, and Excel. Support QC reviews and participate in client-facing technical meetings. Apply engineering expertise in process steam, process piping, and process water systems for industrial and/or food-grade facilities. Qualifications Ohio PE License (required); KY/IN PE or ability to obtain within 12 months. 5+ years of mechanical/HVAC design experience with strong hydronics competency. Experience with industrial process systems; ammonia refrigeration experience is a plus. Proven commercial/industrial project background. Proficient in load calculation software and CAD/Revit platforms. Strong code knowledge and design best practices. What's In It for You Competitive compensation + 401(k) with company match Medical, dental, vision, life, disability Tuition reimbursement + PE license support Paid vacation, sick leave, and holidays National resources backed by local leadership Seniority Level Mid-Senior level Industry Construction HVAC and Refrigeration Equipment Manufacturing Employment Type Full-time Job Functions Engineering Skills Revit Mechanical Systems Computer-Aided Design (CAD) Industrial Engineering Hydronics Ammonia Refrigeration Commercial Projects Boilers Chilled Water HVAC

Senior Azure Cloud Engineer - Location: Hybrid onsite 2-3 days per week in Cincinnati, OH 45245 (Eastgate mall Batavia) - 6 Month Contract to Hire - Must be Green Card or US Citizen - Pay: $80-$90 per hr W-2 Conversion Salary ($150k - $160K) CBTS is searching for a Senior Azure-focused Cloud Engineer to design, deploy, and maintain the cloud infrastructure that supports these systems. This role ensures reliability, performance, scalability, security, and operational continuity across multiple applications, environments, and services. You will be responsible for building the underlying platform that allows engineering teams to deliver features quickly and securely-while enabling the ecosystem to scale. Responsibilities: Cloud Infrastructure & Architecture Design and implement Azure-based infrastructure for: APIs (Azure App Service) MAUI + Blazor application backends Databases (Azure SQL) Blob storage for media and timing data Azure Functions (event-driven workloads) Identity & Access Management (Azure AD / Managed Identity) API Management (APIM) Build secure, resilient, highly available cloud environments for production, staging, and development. DevOps & CI/CD Maintain GitHub Actions or Azure DevOps pipelines for: Automated builds Automated deployments Database migrations Artifact and container management Support infrastructure-as-code (IaC) using: Bicep ARM Terraform (optional) Security & Compliance Implement cloud security best practices: Azure Key Vault for secret management Role-based Access Control (RBAC) Network Security Groups and firewalls Managed Identities for services Zero-trust access flows Manage API throttling, DDoS protection, and monitoring alerts. Observability & Monitoring Implement monitoring and alerting with: Azure Monitor Application Insights Log Analytics Create diagnostic dashboards for: API health Latency Errors Throughput Live event traffic (race-day spikes) Performance & Scalability Tune SQL and App Service performance. Support auto-scaling rules for high-demand racing events. Optimize storage, cold/warm data tiers, and retention policies. Ensure low-latency real-time updates (SignalR-backed services). Operational Responsibilities Manage incident response and root cause analysis. Implement backup, restore, and disaster recovery procedures. Work with backend/frontend teams on deployment readiness. Enforce environment standards and configuration consistency. Maintain cloud documentation, runbooks, and architecture diagrams. Requirements Technical Skills 3-7+ years in cloud engineering, DevOps, or infrastructure roles. Strong experience with Azure services: App Service Azure SQL Storage Accounts (blobs/queues/tables) Azure Functions VNETs, networking, firewalls API Management Azure AD / Entra ID Key Vault Monitoring & Application Insights Experience with CI/CD: GitHub Actions or Azure DevOps Deployment slots Automated migrations Infrastructure-as-Code experience (Bicep/ARM/Terraform). Strong understanding of security, identity, and environment isolation. Nice to Have Experience supporting .NET/Blazor/MAUI app deployments. Familiarity with Clean Architecture and modular monolith patterns. Understanding of real-time systems (SignalR). Experience with containerization (Docker) and Azure Container Apps or AKS. Experience with Sports technology or IoT-like hardware integrations. SQL performance tuning experience. Soft Skills Strong communication and documentation skills. Ability to work cross-functionally with developers, designers, and leadership. Operates with high ownership and problem-solving initiative. Thrives in a fast-paced, evolving startup-style environment. CBTS provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a protected veteran in accordance with applicable federal, state and local laws.

Job Description CSafe is seeking an AI & Machine Learning Engineer at our World Headquarters, in Monroe, Ohio to join our world class Software Engineering team! You will develop and deploy intelligent systems that optimize logistics and cold chain operations. You'll build generative AI, simulation, and predictive models that enhance routing, efficiency, and reliability across the supply network. The ideal candidate combines deep technical expertise in machine learning and data science with practical experience implementing scalable solutions in complex, enterprise environments. You will be reporting directly to the Director of Software Engineering. CSafe offers the most comprehensive suite of thermal shipping solutions for pharmaceutical cold chain shipping needs around the world to ensure patients receive the medicines and treatments they need. In addition to key acquisitions, CSafe has operations in more than 70 locations worldwide to ensure product availability and continue to fulfil our founders' mission to provide patients around the world with access to viable, life-enhancing pharmaceuticals. With a “client-first” focus, deep industry expertise and commitment to innovation, CSafe continues to deliver industry-leading products provides an end-to-end portfolio including active and passive bulk air cargo, parcel, cell and gene and specialty last-mile use cases. Our team operates with curiosity, humility, accountability, and entrepreneurial spirit to deliver on our vision and mission. Come join our growing industry and build your career with us! What You'll Do: Design, train, and deploy machine learning models for demand forecasting, routing optimization, and network efficiency Integrate AI systems with existing logistics platforms, sensors, and data pipelines Collaborate with cross-functional teams to translate business challenges into scalable solutions Implement data processing, feature engineering, and model evaluation pipelines using modern frameworks Monitor model performance, retrain systems, and ensure continuous improvement through feedback loops Ensure AI systems meet enterprise standards for security, scalability, and data governance Stay current with advancements in machine learning, optimization algorithms, and generative AI relevant to logistics What You'll Bring: Degree in Computer Science, Software Engineering, or IT or equivalent work experience 5+ years in ML/AI roles with deep statistical learning experience Deep knowledge of Generative AI, NLP, and simulation methods applied to operational and logistics challenges Proficiency in Python and common ML frameworks (TensorFlow, PyTorch, Scikit-learn) Experience with data engineering tools and environments (SQL, Spark, Databricks, Airflow) Familiarity with cloud platforms (AWS or Azure) and MLOps practices for deploying and monitoring models Ability to analyze large, complex datasets to uncover actionable insights and automation opportunities Strong problem-solving skills with a focus on scalability and real-world application Excellent collaboration and communication abilities Why Join Us: At CSafe, we foster an exciting, collaborative, and inclusive work environment that promotes personal and professional growth. We encourage feedback, foster trust, and support a culture of inclusion where everyone's voice matters. Be Part of a Growing Industry by joining a forward-thinking team in the rapidly expanding temperature-controlled shipping sector. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. **Design with Purpose. Lead with Impact. Grow with Us.** Are you a passionate Mechanical Engineer looking to take the next big step in your career? At CMTA, we're more than just engineers, we're innovators, collaborators, and changemakers. We're looking for a skilled and motivated Mechanical Engineer to join our growing team and help shape the future of high-performance buildings. In this role, you'll design cutting-edge systems across sectors like education, healthcare, and government. You'll collaborate with some of the best minds in the industry, directly engage with clients, and contribute to projects that make a real impact on communities. **What You'll Do:** + Design mechanical systems from concept through construction. + Develop innovative, energy-efficient solutions that exceed client expectations. + Collaborate on projects from start to finish, including site visits, drawings, specs, and construction support. + Work closely with architects, engineers, and owners to define project goals and resolve challenges. + Review technical documents and contractor submittals to ensure code compliance and design integrity. + Support and contribute to performance contracting projects that deliver measurable energy savings. + Stay on the leading edge of sustainable design, integrating strategies like LEED or Green Globes. **What You Bring:** + Bachelor's degree in Mechanical or Architectural Engineering (or related field). + 3+ years of experience designing HVAC and mechanical systems + EIT certification + Proficiency in Revit, AutoCAD, Trane Trace, IES VE, Navisworks, and Microsoft Office + Experience in K-12, higher education, healthcare, or public sector projects + Knowledge of building codes, ASHRAE, FGI standards, and energy modeling principles. + A passion for sustainability, performance-driven design, and client collaboration. + Excellent communication and organizational skills-you enjoy working with people and solving problems. **Bonus Points For:** + PE license + LEED AP, CEM, or other green building certifications + Experience with plumbing and fire protection systems + Familiarity with local design-build procurement processes **Why You'll Love Working Here:** + Make a difference by designing buildings that are healthier, smarter, and more energy efficient. + Enjoy a supportive, team-first culture where mentorship and growth are part of the everyday. + Get involved in diverse, meaningful projects that stretch your skills and fuel your passion. + Be part of a company that values curiosity, creativity, and continuous learning. **Ready to Build the Future?** At CMTA, you won't just design systems; you'll help create lasting solutions that improve lives and inspire progress. If you're ready to take ownership of your work, lead high-impact projects, and grow alongside a dynamic team, we'd love to hear from you. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based on relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. No sponsorship is available for this position. **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Health & Welfare:** Company Paid medical, dental, vision, prescription drug, accident & sickness benefit, basic group life and AD&D, and Employee Assistance Program **Time Off Benefits:** Paid vacation, company-paid holidays, and paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Salary** **Education Level** **Bachelor's Degree**

We are seeking an experienced and self-motivated Mechanical Engineer to join our team. The successful candidate will collaborate closely with the hiring manager and cross-functional teams to enhance our manufacturing processes for non-woven sheet materials used in the production of mopping disposable pads. The primary focus will be on understanding material and manufacturing limitations related to welding, gluing, and slitting/perforation techniques, with key focus on prototyping and optimizing approaches for these methods with respect to a continuous roll manufactured product. Our goal is to improve consumer tear-off functionality and to optimize the tuft layer of the pads, ensuring adequate tuft spacing and maximizing particle pickup efficiency. Responsibilities: * Collaborate with the hiring manager and cross-functional teams to understand the material and manufacturing limitations associated with welding/gluing/slitting non-woven sheet materials. * Take daily direction from the hiring manager to conduct research, perform experiments, and analyze data to develop innovative approaches for methods of continuous roll manufactured products. * Prototype and test different methods of slitting the non-woven sheet materials to enable easy tear-off for consumers at different sizes. * Optimize the tuft layer of the pads to ensure that the spacing and tear operation leave ample free tuft at the edge of the torn-off pad, as tuft is critical for effective particle pickup during mopping. * Monitor and document the results of experiments and tests, maintaining accurate records of findings and observations. * Collaborate with manufacturing engineers to incorporate insights related to future scale up of successful approaches, ensuring seamless integration into the production process. Qualifications * Proficiency in prototyping and conducting experiments to optimize manufacturing processes. * Excellent analytical and problem-solving skills with the ability to interpret and draw insights from data. * Strong communication skills to collaborate effectively with cross-functional teams. * Detail-oriented with the ability to maintain accurate documentation and records. * Self-motivated and able to work independently with minimal supervision. Kaleidoscope, an Infosys Company, is an equal opportunity employer, and all qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of protected veteran, or disability

OTC Industrial Technologies is looking for a Mechanical Engineer to join our team in West Chester, OH! As a Mechanical Engineer you will be responsible for the design of air compressor facilities, as well as working with various other departments (sales, service, etc.) to support their efforts using your engineering knowledge and expertise. What You'll Do: * Design air compressor facilities and work with manufacturing to support their production. * Conduct reviews of your design with safety, manufacturing, service, project management, and other teams. * Detail components from your design and provide to manufacturing for builds. * Design to continually improve safety, quality, serviceability, and cost of the product. * Create Bills of Material and work with Operations to order these items. * Create standardized procedural documents to assist in streamlining drawings. * Work with cross-functional teams to create manufacturing work instructions. * Interface with suppliers to specify and improve equipment. * Interface with the manufacturing department to efficiently design, specify, and troubleshoot production issues. * Interface with the sales department and installation team to correctly specify and design to meet customer needs. * Interface with the service department to correctly specify and design to improve the serviceability of the products. * Assist the manufacturing and installation process as needed. * Other duties may be assigned as needed. What You'll Need: * Bachelor's degree in mechanical engineering or equivalent required * Experience creating engineering drawings and models using AutoCAD and/or SolidWorks * Ability to perform light physical labor as required. * Ability to travel to customer sites and training purposes may be required. 10%- 15% annually. * Attention to detail * Positive attitude * Compressor, filtration, and piping knowledge a plus * Understanding of IBC a plus * Sheet metal design a plus * Understanding of NEC and electrical routing a plus Perks of Working with OTC Industrial Technologies: Health and Wellness * Medical, dental, and vision care coverage * Short-and long-term disability coverage, and life insurance * Wellness Discount * Safety shoes & glasses reimbursement stipend Financial Benefits * 401(k) savings plan with an employer match of 50% on the dollar up to 6% * Robust referral bonuses * Relocation assistance Work-Life Balance * PTO * Tuition assistance Who we are: At OTC Industrial Technologies, our people drive our success. With over 60 years of prioritizing talent investment and internal growth, we offer diverse career opportunities. We deliver top-quality products, technical expertise, and services at competitive costs by leveraging our team's experience and partnerships with leading vendors. Join us if you're motivated to be part of an exciting transformational journey. To learn more about OTC, CLICK HERE. OTC Industrial Technologies is an Equal Opportunity Employer (EOE). We celebrate diversity and are committed to creating an inclusive environment for all employees.

Are you ready to apply cutting-edge technologies to solve real world problems? You might just be a perfect fit for the CDO team. Since 1995, CDO Technologies has delivered the best solutions for unique business problems in the commercial and federal sectors ranging from Asset Management to IT Services. Primary Duties/Responsibilities: Work with SKM Electrical system modeling software for Arc Flash Analysis, short circuit studies, protective device coordination, power flow studies, etc. Obtain real world experience in Electrical Power Engineering Hands-on field work - investigating existing conditions and gathering information at project locations Work with project engineers developing designs for power distribution and facility electrical systems, including emergency power, telecom / data, fire / security, and lighting. Co-op will become familiar with system protection applications, short circuit analysis, medium/high voltage systems and distribution components. Projects will generally be for healthcare or institutional facilities. In addition to participating in project design work, expect to use Autocad, Revit, research and document completed projects, attend meetings, and assist in developing presentations. This position is 50/50 office work and project site work. Overnight travel for this co-op position would be unusual (but not improbable). CDO is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Title: Mechanic - Packaging Line Compensation: Each Person will be compensated hourly with a rate starting at $30.00/hr. + more based on experience and skills as well as shift differentials of $2/hr for 3rd and $6/hr for Weekend Night. Shift Information: 3rd Shift Sunday-Thursday - 10:30pm - 6:40am Weekend Night: (Fri., Sat., Sun.: 6:30PM - 6:30AM) Position Overview/Position Responsibilities: Electromechanical Technicians are responsible for maintenance, repair, and continuous improvement of all packaging machinery and systems. A Packaging Mechanic must have working knowledge of the production process, items produced, and equipment utilized in maintaining production within specific norms and standards. They will lead TPM methodologies on their lines and must be willing to use data to drive improvement projects. A Packaging Mechanic must ensure that all work completed meets our quality standards and is completed in a safe manner aligned with our Quality and Safety Policies while adhering to Good Manufacturing Practices. Packaging Mechanics must make independent decisions daily, knowing when to involve others. What's In It For YOU: * Safety-centric Environment with Inclusive Mindset & Culture * Competitive Pay + Profit Sharing * Pension Plan + 401K w/ Company Match * Flexible Time Off: 30 Paid Days Off a Year * Full Benefit Package (Medical, Dental, Vision, HSA) * Free & Discounted Products @ L'Oréal Company Store * Paid Parental Leave Additional Benefits: Shift Differential & Opportunity for Overtime, Growing business with opportunity for advancement, Vacation purchase plan, Learning & Development Opportunities, Employee Resource Groups, Access to Mental Health & Wellness Programs, Tuition Reimbursement, Clean & Climate-controlled environment What we are looking for: Job Requirements: * 3+ years' experience in electrical and mechanical troubleshooting OR equivalent education/training/certification(s) accompanied with minimum 1 year experience * Ability to read and interpret electrical schematics and mechanical diagrams * Basic understanding of electricity and basic motor controls * Understanding of and experience maintaining machine safety standards * Understanding of equipment design best practices * Ability to use hand tools; (ranging from screwdriver to multimeter/voltmeter) * Basic computer skills (ability to learn a computerized maintenance management system/Microsoft Outlook/etc.) * Experience in a manufacturing environment * Experience working on industrial machines as part of a team * Experience with preventative maintenance Physical Requirements: * Prolonged standing * Continuous movement in and around packaging line * Frequent bending and stooping * Occasional lifting up to 50lbs * Pushing and pulling up to 50lbs Job Responsibilities: * Clearly communicate status of equipment/known issues/action plans with supervisors, mechanics, operators, and other employees on all shifts and in all departments, including strong shift change handoff of information, knowing when/how to elevate as appropriate. * Maintain open communication (verbal and written) with supervisors, mechanics, other employees, and complete paper and computer work (refer to specific department duties); Fully utilize all required systems (asset management, etc.). * Lead, train, and coach TPM initiatives. * Participate in line improvement teams * Propose and implement improvements to the line within the line improvement team as well as independently * Effectively use data to develop action plans to address downtime * Utilize PDCA cycle for communication and decision making * Maintain machine standards and implement best practices, including safety, quality, equipment design, and nominal settings. * Maintain, Troubleshoot and Repair all mechanical equipment as assigned * Read and interpret electrical schematics and mechanical diagrams * Assessment of material requirements, requisition placement * Preventative maintenance * Use and understand troubleshooting tools (Root Cause Analysis) * Take action to repair equipment including modification of design, replacement of parts, adjustment of equipment settings, etc. * Assessment of material requirements, requisition placement * Organize and maintain all technical documentation for assigned equipment Required Competencies: * Must demonstrate 100% responsibility * Must have a technical aptitude with a willingness to learn new operations / technologies * Must produce World Class Results through teamwork, selflessly developing and training others for success * Must have a positive attitude and be open to new ideas and concept * Must thrive within a changing organization requiring the need to multi-task * Must listen for understanding and communicate using the Who, What, When, Where and How model * Must resolve conflicts directly and be committed to team decisions. Please note: This does not list all duties of the job. Employees may be asked by management to perform other duties. The employer has the right to revise this at any time. Company Info: For more than a century, L'Oréal has devoted its energy, innovation, and scientific excellence solely to one business: Beauty. Our goal is to offer each and every person around the world the best of beauty in terms of quality, efficacy, safety, sincerity and responsibility to satisfy all beauty needs and desires in their infinite diversity. At L'Oréal Operations, we create innovative, inclusive, and sustainable beauty together with our business partners by designing, developing, sourcing, manufacturing, and distributing over 6 billion products globally every year. We support over 36 brands across four L'Oréal divisions. We are consumer-oriented, and we act responsibly all along the value chain. To learn more about L'Oréal's commitment to sustainability, please click HERE Don't meet every single requirement? At L'Oréal, we are dedicated to building a diverse, inclusive, and innovative workplace. If you're excited about this role but your past experience doesn't align perfectly with the qualifications listed in the job description, we encourage you to apply anyways! You may just be the right candidate for this or other roles! We are an Equal Opportunity Employer and take pride in a diverse environment. We would love to find out more about you as a candidate and do not discriminate in recruitment, hiring, training, promotion, or other employment practices for reasons of race, color, religion, gender, sexual orientation, national origin, age, marital or veteran status, medical condition or disability, or any other legally protected status. If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting [email protected]. If you need assistance to accommodate a disability, you may request an accommodation at any time. Our Safe Together Plan: Your safety is our highest priority. We will proceed with caution and adhere to enhanced protection standards to ensure our sites are safe for all employees. We must all operate with the shared responsibility for each other.

SummaryEngine Test Enabling Hardware (ETEH) is a group of Mechanical/Aerospace Engineers/Specialists whose mission is to provide engineering services for design and build-up of mechanical test systems in support of the engineering initiatives. ETEH integrates the test article to the test cell while striving to exceed customer expectations. This group provides mechanical engineering support to all of GE Aviation's domestic, international, development engine, production engine, and engine services. The role will focus on working on projects that require mechanical specialist acumen within the ETEH group.Job DescriptionRoles and Responsibilities Execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. This work would include several disciplines within the mechanical engineering domain expertise for multiple product lines in GE Aviation. Particularly Design and manufacturing of enabling hardware for engine missions. The engineer may interact with Test Facilities Engineering, Instrumentation, Assembly, Test Operations, Peebles T.E.H., Test engineering and Evaluation Engineering to achieve success on engine or other related component testing. Developing specialized knowledge in their discipline. Serves as best practice/quality resource. Has awareness of latest technical developments in own area. Contributes towards strategy and policy development and ensure delivery within area of responsibility. Has in-depth knowledge of best practices and how own area integrated with others; has working knowledge of competition and the factors that differentiate them in the market. Reviews and updates Design Operating Practices to enhance the processes within the TSE department. Participates in reviews with Chief Engineers, local maintenance groups, tradesmen, DMO or Outside vendors to ensure manufacturability of designed components. Uses judgment to make decisions or solve moderately complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering. Takes new perspective on existing solutions. Uses technical experience and expertise for data analysis to support recommendations. Uses multiple internal and limited external sources outside of own function to arrive at decisions. Acts as a resource for colleagues with less experience. Leads projects with moderate risks and resource requirements. Explains difficult or sensitive information; works to build consensus. Developing persuasion skills required to influence others on topics within field. Serves as a mentor to less experienced engineers. Required Qualifications Bachelor's degree in Mechanical/Aerospace Engineering from an accredited college or university Minimum of 5 years' experience in mechanical design Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics Master's degree Experience with turboshaft engine test hardware Experience with high temperature bleed systems Experience on the following type of engineering analysis: Linear and non-linear analyses, Thermal analyses (permanent + transient); Heat Transfer; Dynamic analyses; Advanced skills in material mechanics (vibration, fatigue, creep); Fluid Flow Demonstrate GE Leadership behaviors where the engineer acts with humility, leads with transparency and delivers with focus always with unyielding integrity. Previous Experience in Test Enabling Hardware design and manufacturing. Strong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs / projects. Ability to document, plan, market, and execute programs. Working knowledge of Teamcenter, Vismockup, NX. Experience working with PDE designers (Internal or External) to design concepts, models, assemblies and deliver drawings for manufacturing. #LI-TJ1 This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

I. Summary Lead Mechanical Engineers are responsible for the development of air distribution systems, single line control diagrams, load studies and analysis as well as equipment selection. Responsibilities include assisting with planning, conducting and evaluating approaches to meet project objectives in a timely, cost-effective fashion. II. Essential Duties & Responsibilities Core Function Perform engineering tasks and work with engineers to produce projects in design. Review mechanical designs per QC/QA standards. Assist Construction Administration representatives in reviewing submittals and answering questions from projects in the field. General Working knowledge of miscellaneous office equipment technology such as phones, copiers, plotters, scanners and computers. Willingness to accept responsibility and accountability. On time and dependable. Keep accurate records of billable time and submits timesheets on time. Completes tasks thoroughly and on time. Able to delegate information to mechanical designers and co-ops when needed. Understand and follows company structure. Understands and follows department standards and procedures. Understand floor plans, sections, details and complex architectural concepts. Work within multi-discipline project teams to develop drawing and specification documents for issuance to architects, contractors and building owners. Proactively communicates any concerns, problems or technical decisions that impact the project. Offer solutions and value engineering where required. Activities Preparation and modification of mechanical engineering drawings using computer-aided drafting and design systems such as AutoCad of Revit. Participate in company technical training to gain understanding of process and knowledge of field. Collaboration on projects to develop a plan for actions required to meet deadlines. Mechanical Engineering and Design Typical systems designed at this level are all types of air-side equipment, variable and constant volume air distribution including ductwork routing and sizing and air device selection and sizing. Typical systems designed at this level are packaged and terminal equipment sections and air distribution including ductwork routing and sizing and air device selection and sizing. Understands and can apply hydronic piping engineering principals and systems including condenser water, geothermal, chilled water, hot water and steam. Understands complex mechanical engineering principals used in design. Has a good understanding of hydronic systems and plants. Understands and can apply design principals of hydronic systems and plants. Creates and understands all aspects of a single line diagram. Develop engineering sketches or schematics, layouts, details and/or drawings. Perform advanced HVAC calculations such as external static pressure, system and zone heat losses and gains and ventilation calculations for complicated systems. Understands and can proficiently reference and apply applicable building codes. Ability to perform complex energy models and interpret model results. Research and prepare reports for feasibility studies, life cycle cost analysis and other similar reports. Performs and demonstrates HVAC energy compliance using ComCheck, Title 24, FlaCom and other energy compliance software and provides supporting documentation. Able to edit Mechanical specifications. Perform opinion of costs. Perform detailed mechanical surveys. Ability to troubleshoot air side issues. Create trainings to teach others advanced tasks within the department. Expectations of all engineering and design co-ops Demonstrate acceptance of responsibility; show pride in work performed; demonstrate flexibility in acceptance of assignments and schedules; maintain professional behavior and appearance; exhibit dependability. III. Supervisory Responsibilities There may be direct supervisory responsibilities associated with this position. Studio directors may assign mechanical engineers, designers or mechanical co-ops to be under lead engineer's supervision. IV. Qualifications Education Bachelor's Degree (B.S) from a four-year university or equivalent experience is required. Professional Engineering license preferred. LEED AP is preferred. Experience 5+ years working in an MEP engineering consulting firm on multiple building types. Plumbing design and engineering is a plus. Communication Skills Verbal - Convey easily and quickly any message; Speaks clearly and persuasively in positive or negative situations; listens attentively and seeks clarification; Maintain professional nonverbal communication analogous to situation. Written - Writes clearly and informatively with a high level of sophistication; Presents numerical data effectively. Computer Skills Basic computing skills and proficiency in Microsoft Office programs including MS Word, MS Excel, MS Outlook, and Access.Proficient in AutoCAD and Revit

Job Description We are seeking an experienced and self-motivated Mechanical Engineer to join our team. The successful candidate will collaborate closely with the hiring manager and cross-functional teams to enhance our manufacturing processes for non-woven sheet materials used in the production of mopping disposable pads. The primary focus will be on understanding material and manufacturing limitations related to welding, gluing, and slitting/perforation techniques, with key focus on prototyping and optimizing approaches for these methods with respect to a continuous roll manufactured product. Our goal is to improve consumer tear-off functionality and to optimize the tuft layer of the pads, ensuring adequate tuft spacing and maximizing particle pickup efficiency. Responsibilities: - Collaborate with the hiring manager and cross-functional teams to understand the material and manufacturing limitations associated with welding/gluing/slitting non-woven sheet materials. - Take daily direction from the hiring manager to conduct research, perform experiments, and analyze data to develop innovative approaches for methods of continuous roll manufactured products. - Prototype and test different methods of slitting the non-woven sheet materials to enable easy tear-off for consumers at different sizes. - Optimize the tuft layer of the pads to ensure that the spacing and tear operation leave ample free tuft at the edge of the torn-off pad, as tuft is critical for effective particle pickup during mopping. - Monitor and document the results of experiments and tests, maintaining accurate records of findings and observations. - Collaborate with manufacturing engineers to incorporate insights related to future scale up of successful approaches, ensuring seamless integration into the production process. Qualifications - Proficiency in prototyping and conducting experiments to optimize manufacturing processes. - Excellent analytical and problem-solving skills with the ability to interpret and draw insights from data. - Strong communication skills to collaborate effectively with cross-functional teams. - Detail-oriented with the ability to maintain accurate documentation and records. - Self-motivated and able to work independently with minimal supervision. Kaleidoscope, an Infosys Company, is an equal opportunity employer, and all qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of protected veteran, or disability

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. **Position Overview:** CMTA **Cincinnati** is seeking a Senior Mechanical Engineer with 7+ years of experience in consulting engineering. In this role, you will collaborate with a team of engineers to design energy-efficient mechanical systems for buildings across various industries. We're looking for a self-motivated professional with a strong technical background who enjoys working directly with clients and contributing to all phases of a project. **Key Responsibilities:** + Design HVAC and mechanical systems for energy-efficient buildings. + Manage projects from conception to completion, ensuring compliance with engineering standards. + Attend meetings with clients, owners, and architects to develop project requirements. + Provide guidance to staff engineers on best practices for energy-efficient design. + Review contractor submittals (shop drawings, specifications) for compliance with contract documents. + Evaluate, select, and apply engineering techniques and procedures for project tasks. + Research and analyze customer design proposals, manuals, and standards to determine feasibility, cost, and maintenance requirements. + Specify system components or modify designs to meet engineering and performance specifications. + Collaborate with engineers and project personnel to resolve design issues and provide technical expertise. + Provide mentoring and leadership to less experienced staff and provide technical reviews of co-workers projects. **Desired Experience:** + Bachelor's Degree in Mechanical or Architectural Engineering required + 7+ years of experience as a Mechanical Engineer designing HVAC systems in consulting engineering. + EIT certification or PE preferred. + Strong experience with MEP design and HVAC systems. + Proficiency in Revit. + Experience in project management and direct client interactions. **Preferred Skills:** + Expertise energy-efficient design, and sustainable building practices. + Strong preference for someone with healthcare design experience. + Knowledge of construction processes and submittal reviews. + Strong problem-solving skills and the ability to provide technical feedback to design engineers. This is a great opportunity to join a leading firm in MEP consulting and sustainable building design. If you are passionate about high-performance buildings and zero-energy solutions, we encourage you to apply! \#LI-CC2 **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Health & Welfare:** Company Paid medical, dental, vision, prescription drug, accident & sickness benefit, basic group life and AD&D, and Employee Assistance Program **Time Off Benefits:** Paid vacation, company-paid holidays, and paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Salary** **Education Level** **Bachelor's Degree**

SummaryEngine Test Enabling Hardware (ETEH) is a group of Mechanical/Aerospace Engineers/Specialists whose mission is to provide engineering services for design and build-up of mechanical test systems in support of the engineering initiatives. ETEH integrates the test article to the test cell while striving to exceed customer expectations. This group provides mechanical engineering support to all of GE Aviation's domestic, international, development engine, production engine, and engine services. The role will focus on working on projects that require mechanical specialist acumen within the ETEH group.Job Description Roles and Responsibilities Test Enabling Hardware (TEH) Installation Planning TPS Creation and Updates Drawing Update Guidance Technical Support for TEH Installation & Test Setup Hardware Tracking End User Interface NPI Hardware Focal Field Support for TEH Engineering in Evendale Hardware Procurement/Shipping/Storage Logistics Knowledge of Teamcenter & DE Visualization Manufacturing/Fabrication End User Interface Support development, production and MRO engine testing from a mechanical engineering perspective Write design, construction, and procurement specifications, obtain budgetary quotes, and then implement the project once approved Work with engineers, outside contractors, and internal GE labor to complete the mission Required Qualifications Bachelor's degree in engineering from an accredited university or college Minimum of 7 years of experience in manufacturing & test support Computer skills - comfortable with email, Excel, PowerPoint Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics Strong oral and written communication skills. Demonstrated ability to analyze and resolve problems. Ability to document, plan, market, and execute programs. Established project management skills. #LI-TJ1 This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Title: Senior Mechanical Engineer Service Group: Assigned Service Group Reports To: Service Group Director & Director of Mechanical Engineering I. Summary The role of a Senior Mechanical Engineer is to provide engineering leadership for technical challenges, on projects, to clients, and within the mechanical department. Technical capabilities required of a Senior Mechanical Engineer include all engineering necessary for HVAC plants, systems, hydronic distribution, air side distribution and life safety systems. II. Core Competencies and Responsibilities Engineering Perform detailed mechanical surveys Perform engineering tasks and work with engineers and designers to produce projects in design Able to bring multiple project types to completion from design inception to construction closeout Review mechanical designs Perform Construction Administration including but not limited to site observation reports, punch list, submittals and RFI responses Able to troubleshoot complex field mechanical issues Research and prepare mechanical engineering reports for feasibility studies, life cycle analysis, and other similar reports Client Understands complex mechanical engineering principals used in design and confidently discuss them with internal and external clients Participates in business development activities Project Performance Completes engineering tasks within the project budget Completes engineering tasks to meet the project schedule Is able to provide feedback to supervisors, project managers, and principals related to project performance Address change orders and prepares responses to client Capable of estimating required engineering hours to complete a tasks and prepare corresponding engineering fees Supervisory There may be direct supervisory responsibilities associated with this position Studio directors may assign engineers, associates or co-ops to be under your supervision III. Technical Capabilities Understands and can apply hydronic piping engineering principals to systems and plants providing condenser water, geothermal, chilled water, hot water, steam, and refrigerant Understands and can apply design principals of hydronic systems and plants Understands building pressure and stack effect and can engineer systems to address building pressure including life safety systems for hoist way and stairwell pressurization and smoke control Creates and understands all aspects of single line diagrams Develop engineering sketches or schematics, layouts, details and/or drawings Understands and can proficiently reference and apply applicable codes Understands and can apply SMACNA standards to all ductwork pressure classes and type Able to edit Mechanical specifications Perform advanced building, system, and plant level HVAC calculations for complicated systems Research and prepare reports for feasibility studies, life cycle cost analysis and other similar reports Performs and demonstrates HVAC energy compliance using energy compliance software and provide supporting documentation IV. Qualifications Licensure Professional Engineering license is required Membership Recommended memberships and participation in professional organizations include: ASHRAE SMACNA Certifications Recommended certifications include but are not limited to: LEED AP Certified Energy Manager Well Building ASHRAE Commissioning Professional (BCxP) ASHRAE Assessment Professional (BEAP) ASHRAE Energy Modeling Professional (BEMP) ASHRAE High Performance Building Design Professional (HBDP) ASHRAE Certified HVAC Designer (CHD) Experience 10+ years working in an MEP engineering consulting firm on multiple building types 6+ years working as a licensed professional engineer Project experience across multiple market segments preferred (Healthcare, Education, Commercial, Civic, Retail) Computer Skills Proficiency in Microsoft Office programs including Word, Excel, Outlook, and Teams Proficient in Autodesk Revit Expectations Demonstrate acceptance of responsibility; show pride in work performed; demonstrate flexibility in acceptance of assignments and schedules; maintain professional behavior and appearance; exhibit dependability

Engine Dynamics builds analytical models of the full engine or rig to enable design assessment, calculation of unbalance and flight maneuver design loads, and to assist in vibration related problem solving and test data interpretation for tech maturation, new and fielded products. As a Lead Engineer within Engine Dynamics, you interface with design, Systems, and the customer to work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. **Job Description** **Roles and Responsibilities** As an Engine Dynamics Lead Engineer, you will: + Execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements + Provide technical leadership to personnel supporting the assigned project + Document technical data generated by the assigned project consistent with engineering policies and procedures + Provide timely communications on significant issues or developments + Participate on teams assigned to address organizational initiatives and generic issues + Participate as a presenter or reviewer in technical and program reviews + Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures **Required Qualifications** + Bachelor's Degree in Engineering from an accredited college or university + At least 3 additional years of experience in a design engineering position + Due to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenship. **Desired Characteristics** + Familiarity with vibration analysis, vibration testing and rotor dynamics' analysis methods + Understanding of NASTRAN, LSDYNA or other finite element computer codes (modeling and dynamic analysis) + Familiarity with Matlab/Python + Interest in continuing to improve standard processes and improve best practices + Strong technical aptitude, including applicable engineering tools and systems + Solid oral and written communication skills + Effective problem identification and solution skills. + Strong interpersonal and leadership skills + Lead initiatives of limited scope and impact. + Ability to work several projects simultaneously. + Proven analytical and organizational ability. + Ability to influence others and work in small teams _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.