Machinist jobs in Speedway, IN

Education requirements are: * High School Diploma or Equivalent and credentialed Machinist journeyman's card or six (6) years' documented experience in industrial/manufacturing machining. Skills requirements are: * Mathematics - add, subtract, multiply, and divide in all units of measure using whole numbers and common fractions. * Language - read and interpret the following documents: safety policies, follow all operating and maintenance procedures, follow all emergency procedures and various manuals, write routine reports and correspondence, and use communication skills with coworkers. * Reasoning ability - ability to apply common sense and understanding; ability to carry out detailed but uninvolved written and oral instructions; and the ability to interact with coworkers through communications and acceptance of expectations and accountability. * Communication skills. * Experience working within an industrial maintenance, specifically manufacturing, environment. Essential experience required: * High standard of integrity and professionalism; * Strong working knowledge of job site safety as well as ability to complete a company specific safety orientation * Solid knowledge and understanding of system operation, building plans and working drawings * Hold a Machinist Journeyman's card or 6 years of experience as a Machinist * Knowledge of the use and care of tools, safety practices, blueprint reading as well as mathematics, mechanical drawings, etc. * A comprehensive understanding of lathes, shapers, drill presses, planers, broaching, grinders, milling machines, and other tools. * Knowledge of cutting coolants, lubricants and their uses. * Ability to stand and walk for up to seventy-five percent of work time. * Work with minimal supervision * Self starter * Experience working with equipment such as: boom lifts, scissor lifts, and forklifts Essential job functions: * While working from within work orders, verbal instructions, complex blueprints, schematics and plans and sketches, the Machinist will lay out, plan work, setup and operate a wide variety of machine tools commonly used in a maintenance and machine shop. * Designs, and/or works from complex designs to lay out, field test and fit, inspect, fabricate and/or repair a wide variety of complicated parts. * Operates various material handling equipment such as floor controlled or overhead cranes, prime movers or work savers to perform work pertaining to the craft; may occasionally operate a fork truck or man lift in performing work related to the craft. * Assists, directs and trains apprentices in the industrial maintenance and Machinist craft. * Maintains records and follows recordkeeping processes.

Adecco is seeking Machinists for immediate openings with a local client in Indianapolis, IN. Weekly pay starting at $18.00-$22.00 per hour and competitive benefits with options such as medical, dental, vision, and 401(k). Apply today! In this role, you will set up, operate, and maintain various machinery to fabricate and modify parts according to specifications, ensuring quality and efficiency throughout the production process. These Machinist jobs require a minimum of two years of related work expereince. An Associates degree is preferred. To be successful in this role, you must be able to approach challenges with a proactive and problem-solving mindset. Schedule: + 1st shift: Monday-Friday 7:00am-3:30pm Click on Apply Now to be considered for this Manufacturing job in Indianapolis, IN. **Pay Details:** $18.00 to $22.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

What makes us strong? Our employees in 50 countries worldwide - all working with passion to enable high-tech applications with our strong metals: tungsten and molybdenum. Our Mi-Tech Tungsten Metals site in Indianapolis is home to a dedicated team producing high-performance tungsten alloys for industries that shape the future-from aerospace and defense to medical and industrial applications. Join a highly motivated team in Indianapolis, USA, where local expertise meets the global knowledge and values of the Plansee Group. Position type: Hourly Mi-Tech Tungsten Metals is looking for skilled manual machinists to work 2nd shift. The ideal candidate will be able to operate tools and equipment to produce precision metal pieces. Be able to set up machinery to perform accurate measurements to meet required specifications. Requirements: • Read and interpret mechanical drawings and technical documents • Strong knowledge of machine tools and machining operations • Knowledge of measuring tools (calipers, micrometers, gauges, indicators) • Precision and attention to detail Qualifications: • Strong problem-solving skills • Ability to set up machines and make changes as needed • Able to work as a team • 3-5 years' experience - Preferred We Offer: Medical, Dental, Vision, Company Paid Short-Term Disability, Company Paid Life Insurance, Voluntary Life Insurance, Company Paid Safety Shoes and Safety Glasses Program Vacation Days and Personal Days Paid Holidays Equal Employment Opportunity We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. Mi-Tech Tungsten Metals LLC

dormakaba is seeking a Third Shift (10:00PM - 6:30AM) Machinist based in Indianapolis, IN. The Machinist I is responsible for performing machine setups, tool changes, and adjusting as necessary. HOURLY HIRING RANGE: $18.56/hr. - $27.31/hr. plus $.75/hr. shift differential. Mandatory overtime may be required as needed. (Pay rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data). This position includes a competitive benefits package. Please visit our career site for more information on benefits. $2,000 Sign-on Bonus (details provided during interview) WHAT YOU WILL DO * Operate the machine according to standard operating instructions (SOP) * Document and inspect quality of work per Quality Assurance Inspection Procedure (QAIP) * Use micrometers, height gauges, calipers, and comparators WHAT WE REQUIRE * High school diploma or equivalent * Extensive experience operating, setups, tool changes, etc. * Understanding of shop math & blueprint reading/comprehension Geometric Dimensioning and Tolerancing (GD&T) * Ability to perform advanced quality inspections * Fluency in both verbal and written English PHYSICAL REQUIREMENTS The physical demands described below are representative of those that must be met in order to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable those with disabilities to perform these essential functions: * Use hands and fingers for seizing, holding, grasping, turning, etc. and for fine manipulation such as touching, picking, and pinching * Communicate effectively in a manufacturing environment by speaking and listening * Use close/distance/color/peripheral vision, including using depth perception and adjusting focus * Remain active throughout shift by standing, walking, bending, kneeling, stooping, crouching, crawling, climbing, and lifting/moving items up to 40 pounds WHAT WE PREFER * SAP or Enterprise system knowledge * Computer proficiency and lean skills * Documented manufacturing education/training WHAT WE OFFER * Taking Care of our Employees on Day One with Medical, Dental, Vision, Life and Disability Insurance coverage options. No waiting periods! * Your health is our priority, we offer Medical Wellness Programs to aid in your well-being. * Vacation and Personal Time Off * We support your growing family; we provide Parental Leave for Moms and Dads! * Wisely plan for your future with our 401k Matching plan beginning on Day One. * Supporting your career development with our Tuition Reimbursement Program. * Robust culture supporting internal advancement with our Learn and Grow Program. * Discover your best attributes using CliftonStrengths to pave the way for success at dormakaba. * 24/7 access to over 15,000 LinkedIn Learning courses to assist in your professional development and to expand on your individual interests. * Employee Assistance Programs * Voluntary Legal Insurance * Unlimited Referral Reward Bonuses * Corporate Discounts for shopping, travel and more! WHY JOIN DORMAKABA? We are at the heart of every place that matters. As a leading global provider in the access solutions market for schools, banks, airports, hospitals, and hotels, we enable seamless movement within secure, safe, and sustainable places. Our work is IMPORTANT. YOU are important. We provide our people with the tools to shape their careers for growth. With around 16,000 employees worldwide, EVERY team member contributes to our mission and can make a positive difference. By working as one global team, we continue Growing the Business, Growing Together, and Growing Ourselves. Build your career with us! Learn why our employees enjoy working for dormakaba: dormakaba Testimonials #LI-HW1 #LI-Onsite

3939 W 56th St, Indianapolis, IN 46254 IN180 Manufacturing Facility Full-time Shift(s): FRI SAT SUN 6:00am - 6:30pm Working as Full-time Manufacturing Machinist, you will setup and operate multiple pieces of equipment such as turning centers, machining centers, and various other pieces of manual equipment. The successful candidate must understand machine operation and capabilities of each of those machines. This position may offer a flexible schedule after a period of onboarding, training, and meeting performance goals. RESPONSIBILITIES: The duties and responsibilities of this position include, but are not limited to: o Performing accurate inspections on product o Running multiple pieces of equipment at the same time o Providing assistance to other employees when needed o Maintaining the cleanliness and organization of work area REQUIRED POSITION QUALIFICATIONS: The following skills and qualifications are required for this position: o 18 years of age or older, due to the nature of work o Excellent written and oral communication skills o Proficient using Microsoft Office Suite o Demonstrate strong math aptitude, attention to detail and sense of urgency o Demonstrate strong organization, planning and prioritizing abilities o Work independently as well as in a team environment o Exhibit strong problem solving, deductive reasoning and decision making skills o Learn and perform multiple tasks in a fast paced environment o Demonstrate our core values of ambition, innovation, integrity and teamwork o Lift, slide, carry and lower packages that typically weigh 25lbs-50lbs and may weigh up to 100lbs o Pass the required drug screen (applicable in the US, Puerto Rico and Guam ONLY) PREFERRED POSITION QUALIFICATIONS: o Prior machining experience o Possess a 2 year tool and die or machining degree ABOUT US: Since 1967 Fastenal has grown as a distributor of industrial and construction supplies from a single branch to a Fortune 500 company with over 3,000 servicing locations, each providing tailored local inventory and personal service for our customers. As we've expanded across the world, we've retained a core belief in people and their ability to accomplish remarkable things - if given the opportunity. From this philosophy stems an entrepreneurial culture that challenges every employee to run their own business, create their own success, and advance to become company leaders. As a growth company with a solid financial position, we are committed to training, promoting from within, and creating opportunities for our employees. If you have an entrepreneurial spirit and are looking to make your mark as part of an elite growth company, you won't find a better fit than Fastenal. FULL-TIME BENEFITS: Fastenal offers a competitive benefits package to all full-time employees. This package includes Health, Life, Long Term Disability, and Dental Insurance, in addition to, paid vacation, sick leave, holidays, and 401(k) with an employer contribution.

Looking to continue and expand your career in Machining? Aspiring to be apart of a dynamic company and culture? Consider our Machine Operation team with Bastian Solutions! A Machinist will be responsible for general machining of parts for material handling equipment projects. The main emphasis for this position is CNC machining; other duties may include manual machining (tapping, countersink, lathe, mill), material movement, as well as general maintenance of machinery and adhering to required tolerances/dimensions for each customized part. Job Functions: * Key emphasis is on safe and efficient machine programming, setup, and operation * Ensure tasks are executed in the most effective manner in regards to time, cost and function * Show top notch craftsmanship in all aspects of job * Open to taking direction and learning from the Production/Manufacturing leadership * Machines include manual CNC mill & lathe (with bar feeder), manual saws, as well as other machine shop equipment * Works from solid models and engineering drawings to produce parts * Ability to program, set up, fixture, and operate CNC mill/lathe and other manual equipment * Repair and maintain production equipment and facilities as required * Produce high quality parts with low rejection rate * Keep work space in a neat and safe organized manner * Show mutual respect for coworkers * Work well with other Custom Automation team members as needed * Highly motivated self-starter * Ability to train others in safe machine operation Preferred Skills & Qualifications: * Minimum education required is High School/GED/Trade School * Ability to interpret engineering drawings and develop machined parts from these specifications * Relevant machining experience including CNC mill/lathe * Experienced with typical machine shop tools and equipment (horizontal saw, vertical saw, deburr, grinder, drill, forklift) * Positive attitude, able to handle tense situations that arise * Advanced experience with manual and CNC mill/lathe * Ability to operate heavy duty equipment in a safe manner * Ability to lift up to 50-75 lbs. on a repetitive basis About Bastian Solutions: Bastian Solutions, a Toyota Advanced Logistics company, is an independent material handling and robotics system integrator providing automated solutions for distribution, manufacturing, and order fulfillment centers around the world. Our team specializes in consulting, system design, project management, maintenance, and installation, while sourcing the best equipment and automation technology. We take great pride in providing exceptional service and flexibility to our customers. In addition to exciting work at a growing company, we offer the following benefits: * Health, Dental, and Vision Insurance * 401(k) Retirement Plan with a company match * Vacation/Holiday Pay * Tuition Reimbursement * Flexible Work Schedules * Volunteer Work * Professional Associations, Conferences and Subscriptions * Company Meetings & Events Bastian Solutions does not work with outside recruiting agencies. No solicitation phone calls please.

Start Your Career with SMF - Where Precision Meets Purpose! At SMF Inc., an Etnyre International Company, we're not just offering jobs-we're building long-term careers. With over 50 years of success in metal manufacturing, we proudly serve the construction, agriculture, power generation, and mining industries as a trusted Tier One supplier to Fortune 500 OEMs. We are currently looking for experienced and motivated CNC Machine Operator to join our 1st shift team. If you're passionate about safety, precision, and continuous improvement, we want to hear from you! Pay Range: $22.25 - $34.24/hour (based on experience) Total Rewards You'll Love: Annual Bonus Program for All Employees Annual Wage Increases ️ Shift Premium: $2.50/hour for 2nd Shift or 3rd shift 11 Paid Holidays + 3 Paid Break Days Generous PTO (Vacation & Flex Time) Affordable Health Insurance (PPO & HSA Options) Low/No-Cost Dental & Vision Coverage ️ Accident, Critical Illness, and Hospital Coverage Options Company-Paid Life, Short-Term & Long-Term Disability 401(k) with Company Match + Annual Profit Sharing Now Hiring: CNC Machine Center Operator for 1st shift What You'll Do: Set up and operate CNC Milling Machine Centers to perform tasks such as drilling, grinding, milling, etc. Understands specifications of the task at hand and the desired result by reading blueprints, mechanical drawings, etc. Translates instructions into computer commands so the machines can perform the correct function Prepares and loads raw materials and parts onto the machines Prepares a test run to check if the machines produce outputs according to specifications Sets machines to complete full cycles to fabricate large number of parts Supervises the machines while they execute the tasks and makes any necessary adjustments to produce a better result Inspects and measures finished products and compares them with requirements to determine if the process has been completed properly Checks and maintains machinery daily to ensure functionality * What We're Looking For: * Ability to read gauges and tape measures * Ability to operate overhead cranes * Ability to lift 50 lbs and stand for long periods of time * Professional Certification is a plus * Proven experience as CNC Milling Machine Center Operator (preferred) * Skill in operating CNC machinery and tooling as well as precision measurement tools * Ability to read and interpret mechanical documents and drawings * Mechanical aptitude and good math skills * A keen eye for detail and a results-driven approach * Good communication abilities Why Join SMF? SMF offers a collaborative, growth-driven culture where your voice is heard and your work is valued. With over 200,000 sq. ft. of production space, we provide unmatched opportunities to advance your career in fabrication, machining, and manufacturing operations. Our team is proud to be ranked in the top 0.5% of machine shops nationwide, and we're just getting started. Ready to take the next step in your machine operator career? Join a team where your skills are respected, your growth is supported, and your future is bright. Apply now and start building your future with SMF!

At AMPG, we're not just machining parts; we're shaping the future! Our cutting-edge facility combines precision engineering with the latest technology to create components that power industries worldwide. If you're passionate about innovation, thrive in a dynamic environment, and want to be part of something extraordinary, keep reading! Position Available : CNC Machinist What You'll Do : As a CNC Machinist at AMPG, you'll be the maestro behind our state-of-the-art machines. Here's what your days will look like: Precision Crafting: You'll set up, operate, and maintain CNC mills and lathes. Tight tolerances? No problem! You'll turn raw materials into works of art. Quality Control Master: You'll inspect parts with laser-like focus. If a micron is out of place, you'll spot it faster than a photon travels! Troubleshooting Guru: When the machines hiccup, you'll diagnose and fix issues faster than a quantum computer can calculate. (Okay, maybe not that fast, but close!) What We're Looking For : Skills: Just a great attitude and a willingness to learn! Experience: None required! We will teach you everything you need to know! Just bring your positive attitude and your desire to learn! Team Player: You'll collaborate with engineers, sales, and fellow machinists. No lone wolves here! Perks & Benefits : Loot Box: A super competitive wage and other benefits such as healthcare and 401k contributions. Toolbox of Wonders: We provide every tool required to do your job successfully, right down to the boots! Time Warp: Paid time off and holiday time Quantum Coffee: Unlimited caffeine to keep your neurons firing. Warp Speed Commute: Teleportation not included, but we're working on it!

Looking to continue and expand your career in Machining? Aspiring to be apart of a dynamic company and culture? Consider our Machine Operation team with Bastian Solutions! A Machinist will be responsible for general machining of parts for material handling equipment projects. The main emphasis for this position is CNC machining; other duties may include manual machining (tapping, countersink, lathe, mill), material movement, as well as general maintenance of machinery and adhering to required tolerances/dimensions for each customized part. Job Functions: Key emphasis is on safe and efficient machine programming, setup, and operation Ensure tasks are executed in the most effective manner in regards to time, cost and function Show top notch craftsmanship in all aspects of job Open to taking direction and learning from the Production/Manufacturing leadership Machines include manual CNC mill & lathe (with bar feeder), manual saws, as well as other machine shop equipment Works from solid models and engineering drawings to produce parts Ability to program, set up, fixture, and operate CNC mill/lathe and other manual equipment Repair and maintain production equipment and facilities as required Produce high quality parts with low rejection rate Keep work space in a neat and safe organized manner Show mutual respect for coworkers Work well with other Custom Automation team members as needed Highly motivated self-starter Ability to train others in safe machine operation Preferred Skills & Qualifications: Minimum education required is High School/GED/Trade School Ability to interpret engineering drawings and develop machined parts from these specifications Relevant machining experience including CNC mill/lathe Experienced with typical machine shop tools and equipment (horizontal saw, vertical saw, deburr, grinder, drill, forklift) Positive attitude, able to handle tense situations that arise Advanced experience with manual and CNC mill/lathe Ability to operate heavy duty equipment in a safe manner Ability to lift up to 50-75 lbs. on a repetitive basis About Bastian Solutions: Bastian Solutions, a Toyota Advanced Logistics company, is an independent material handling and robotics system integrator providing automated solutions for distribution, manufacturing, and order fulfillment centers around the world. Our team specializes in consulting, system design, project management, maintenance, and installation, while sourcing the best equipment and automation technology. We take great pride in providing exceptional service and flexibility to our customers. In addition to exciting work at a growing company, we offer the following benefits: Health, Dental, and Vision Insurance 401(k) Retirement Plan with a company match Vacation/Holiday Pay Tuition Reimbursement Flexible Work Schedules Volunteer Work Professional Associations, Conferences and Subscriptions Company Meetings & Events Bastian Solutions does not work with outside recruiting agencies. No solicitation phone calls please.

Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a CNC Machinist for our client in the Manufacturing domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Contract position, and the client is looking for someone to start immediately. Duration: 6+ Months Contract Location: Indianapolis, IN Salary: $35.00-$40.00/Hourly Role: CNC Machinist Primary Skills: Engineering Role Description: The CNC Machinist must have 5+ years of experience. In this role, you will be responsible to assist in set-up of simple jobs and operation of CNC equipment, tooling maintenance, and ensuring that all required processes are completed to produce parts that meet quality and ISO standards. Duties and Responsibilities: * Fabricates and modifies parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, metal properties, layout, and machining procedures. * Machine parts to specifications using machine tools such as lathes, milling machines, shapers, or grinders. * Measures, examines, and tests completed units in order to detect defects and ensure conformance to specifications. * Assist in set-ups of simple (uncomplicated and straightforward) jobs and operate conventional, special-purpose, and computerized numerical control (CNC) machines and machining centers to fabricate metallic and non-metallic parts and fits and assemble machined parts into complete units, applying knowledge of machine shop theory and procedures, shop mathematics, machinability of materials, and layout techniques. * Able to run multiple machines at one time. Education: Bachelor's degree Experience: Minimum 5+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Veena Grover Recruiter Phone: ************ Benefits: We have various coverages and additional benefits to choose from: * Medical, Dental (Including Ortho) & Vision Insurance (Option to Enroll). * Paid Leaves (Wherever applicable). * Life & Disability Coverage (Upon eligibility). * 401K Option, Education Assistance Program and more. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

**Machinist II Indianapolis [day shift - onsite]** **_Come join a team that makes a difference here and around the world!_** **_Peerless Pump Company, an Indianapolis based subsidiary of Grundfos,_** is seeking an experienced **Machinist II** to join its **Process Pump** Machining group. Founded in 1923, Peerless Pump Company is a US-based manufacturer of horizontal and vertical centrifugal pumps for fire, industrial, and municipal applications. With pump installations in 145 countries, Peerless is globally recognized for engineering tough, reliable, and versatile pump solutions with extensive flow and pressure capabilities. From our production facilities in Indianapolis and Houston to our service centers in Lubbock and Fresno, Peerless pumps are designed to protect people and property from fire and to bring water where it's needed most. Our product quality is second to none, but it's our people who've made us Peerless for over 100 years. Our legacy of innovation is fueled by attracting, training, and retaining employees from diverse backgrounds. With competitive benefits and a strong emphasis on development, growth, and innovation, Peerless employees come seeking a job but stay to build a career. **What is the job about?** The **Machinist II** role requires complete set-up including advanced editing, programming and operation of computer numerically controlled (CNC) machines including vertical, horizontal and multi-axis machining centers, manual machines, lathes and mills. This position reports directly to the 1st shift Production Supervisor and will operate daily out of the **Indianapolis, IN** facility (primarily Mon-Fri, 6am-2:30pm). **_Relocation for this position cannot be supported and qualified candidates must have authorization to work in the USA without support._** **_Your main responsibilities:_** + Inspect area in accordance with 5S principles + Insure daily machine and crane PMs are being completed. + Understand SAP confirmations and insure process is followed. + Study blueprints, drawings, specifications, etc. to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. + Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers. + Calculate and set controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. + Observe machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required. + Verify conformance of finished work piece to prints and specifications and perform secondary operations such as debur, chip removal, bushing, tapping, drilling, etc. + Provide training and instruction to other employees as required; Performs manual and electronic record keeping an information retrieval functions. + Perform work, promote teamwork and communicate in conjunction with our culture and corporate standards (Safety/Environmental, Quality, Continuous Improvement, Communication, Internal Controls, etc.). + Complete setup including programming (Fanuc Controls or G Code preferred), editing, operation and preventative maintenance on CNC milling centers, CNC lathes and/or CNC mills. + Perform off-sets, fixturing and recognize signs of tool wear and poor finish and make adjustments to correct. + Follow all safety and quality procedures and standards and participate in efforts to improve processes, product flow and work standards + Complete required paperwork (manual and electronic) in a timely and accurate manner + Maintain safety and cleanliness of equipment and work area + Perform work, promote teamwork and communicate in conjunction with our culture and corporate standards (Safety/Environmental, Quality, Continuous Improvement, Communication, Internal Controls, etc.). + Inspect parts for conformance to prints and specifications. + Performs manual and electronic record keeping and information retrieval functions. + Wear required safety PPE. + Perform secondary operations such as deburring, chip removal, bushing installation, drilling, and tapping. **Your background** **_We imagine that you have:_** + High School Diploma, GED/HSE/HiSET or equivalent *required + Additional Technical training *preferred. + 2-4 years manual machining (including but not limited to mills, drills and grinders) experience *much preferred. + 1-3 years experience with CNC programming, operation and setup with various controls including Fanuc Controls, Mazatrol Controls and Allen/Bradley Controls on CNC milling centers, CNC lathes and/or CNC mills *much preferred. + Experience doing precision machining using manual machines such as threading, boring and grooving *preferred. + **_Competencies_** + Material handling equipment (Lift truck, two wheeled truck, carts, etc. + Cranes, hoist, screw jacks, hydraulic jacks. + Manual, power driven, and pneumatic hand tools, electronic engraver, Power saw, cutoff wheel, grinders, hydraulic press, radial drill, arbor press, Arc Welding, acetylene cutting equipment and threading machine, Precision measuring instruments, gages, meters + Mechanical aptitude and the ability to read and apply mathematics to work from engineering drawings and schematics to determine assembly procedures and problem solve. + Basic understanding of the fundamentals of electricity. + Ability to operate precision instruments and lifting equipment + Mathematics skills including proficiency subtracting, multiplying and dividing for the purpose of calculating material fabrication. + Ability to communicate effectively, verbally in the English language to understand and use written or verbal control and work instructions, + Ability to analyze and problem solve to resolve various technical and interpersonal issues with collaboration, respect and professionalism. + A desire to be in a leadership role and accept the responsibilities of meeting production goals. + Possess a demonstrated ability to work within a team. + Understand and demonstrate a proactive safety approach. + Possess good problem solving skills with limited supervision. + Proven ability to direct, train, and give guidance on the assembly activities and processes. + Must maintain a good attendance record. + Ability to work overtime as needed. + Ability to run key machines within areas of responsibility. + Strong experience using machining centers in a job shop environment. + Able to read and interpret blueprints, drawings, specifications, setup sheets, etc.; Precision measuring instruments, gages, meters + Able to be forklift certified; Able to be Hazmat certified; Able to operate overhead cranes/hoists + Advanced knowledge of blueprint reading, shop math (decimals, fractions, geometry, trigonometry, etc.) and GD&T, Manufacturing Principles (Safety, Quality, Lean, Process Flow, etc.) + Awareness of Safety and Quality Systems; Able to read and interpret work instructions and procedures + Computer (MS Windows, Lab View, Excel) + Manual, power driven, and pneumatic hand tools, electronic engraver, Power saw, cutoff wheel, grinders, hydraulic press, radial drill, arbor press, and threading machine This position requires the incumbent to stand for extended periods of time, frequently grasp tools, stoop, crouch, reach, stand, and walk when performing duties; twist and reach when assembling parts. + Specific vision abilities include close, distance and peripheral vision. + Able to work in a non-climate controlled factory or field environment. + Demonstrated strong work ethic (including attendance), strong organizational skills and strong communication skills (written and oral). **What's in it for you?** **What are your goals?** Here at Peerless it's our mission to enable you develop and fulfil your aspirations, both career and personal. You'll find that your fresh ideas will be welcomed and make a difference in how we conduct our business. **_In addition, your day-to-day benefits as a regular, full-time employees include:_** + 5 paid holidays; paid time off for volunteering; up to 20 paid vacation days a year accrued by date of hire. + Competitive medical, dental, and vision plans; 401(k)-match program. + Annual bonuses, parental support, engaging team buildings. + Diverse, inclusive environment with employee-led forums offering colleagues a safe place to connect and share openly. + Long-term career development with regular dialogue, as well as continuous learning and development opportunities. + Access to the modern Grundfos Academy to pursue further both personal and professional development. + Diverse, inclusive environment with employee-led forums offering colleagues a safe place to connect and share openly. **Do you want to learn more?** If you have questions or would like to know more about this position, please contact Recruiter at ******************** If this job sounds interesting, please send your resume and cover letter by clicking " **Apply** ". **_We look forward to hearing from you._** If you would like to dig deeper into the Peerless universe, please visit us and check out why our employees are Peerless. I am PEERLESS! (********************************************* **_Peerless participates in E-verify and is an Affirmative Action, Equal Opportunity Employer. All positions subject to post offer drug screening and background checks._** Peerless needs and welcomes professional people from all corners and backgrounds by providing equal employment opportunities for all applicants and employees and prohibits discrimination and harassment of any type. Employment decisions at Peerless and Grundfos are based on business needs, job requirements, and individual qualifications without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. All qualified applicants are encouraged to apply. Learn more about your rights as an applicant and pay transparency. Accommodations are available for applicants with disabilities. Information at a Glance **Job details** Workplace: Onsite Position Job Location: Indianapolis, Indiana, United States Contract Type: Full-Time Employment Type: Regular

Carrier is the leading global provider of healthy, safe and sustainable building and cold chain solutions with a world-class, diverse workforce with business segments covering HVAC, refrigeration, and fire and security. We make modern life possible by delivering safer, smarter and more sustainable services that make a difference to people and our planet while revolutionizing industry trends. This is why we come to work every day. Join us and we can make a difference together. We are looking for a Tool and Die Maker with experience in machining to build and maintain machine tools and industrial machines. The Tool and Die Maker will also be responsible for following technical drawings and using knowledge of mathematics to produce precision parts. Key Responsibilities Plan Work Processes & Sequences - Analyze job requirements and establish the necessary steps to fabricate specified tools efficiently Material Acquisition - Obtain and verify materials according to specifications or job requirements Blueprint & Specification Review - Interpret engineering drawings, instructions, or physical samples to ensure precise production Precision Machining - Work within tight tolerances of .0005” - .001” to achieve high-accuracy components Fabrication & Machining Operations - Perform all necessary machining and fabricating tasks, including heat-treating, annealing, hardening, grinding, and sharpening Tool & Die Assembly - Assemble dies and fixtures, conducting tryout tests to validate functionality Repair & Modification - Execute repair and alteration tasks as required to maintain tool performance and longevity General Toolmaking Support - Carry out additional machining, fabrication, and support tasks as needed Safety & Compliance - Adhere to all site safety regulations, including guidelines outlined in the associate handbook, cardinal rule cards, job-specific standard work, and EHS training documents Environmental Awareness - Report any chemical spills or environmental concerns immediately to a supervisor, security, or EHS personnel Required Qualifications High school diploma or GED 1+ years of experience working with Stamping Dies 1+ years of experience working with complex drawings and close tolerances Ability to use shop mathematics and handbook formulas 6+ months of using all types of precision inspection tools like height gauges, micrometers, calipers etc... Journeyman's License for Tool and Die for a US-based Union OR the ability to pass a skills assessment onsite Preferred Qualifications Excellent verbal and written communication skills Strong teamwork and collaboration skills Strong organizational skills Excellent attention to detail and accuracy Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice

**GE Aerospace Indianapolis** The Indianapolis site manufactures complex Aerospace components for a variety of applications. Join us on our growth and transformation journey in Indianapolis. **A few reasons to consider GE** + 10% pay differential for 2nd/3rd shift. + Healthcare Benefits eligible on day one of employment + 12 annual paid holidays; vacation eligible at day 30 of employment + Climate-controlled building out of the elements + Tuition reimbursement benefit + 401K with company match **Essential Responsibilities** + Complete machine set-up. + Load tool and tool holders as required. + Perform Jaw cutting and re-cutting. + Set fixture offsets as required. + Verify correct tool hardware, tool diameter, tool radius, drill length, and end mills. + Verify accuracy of tool offset changes as needed. + Perform periodic inspections of calibration. + Read and process parts and visual braze inspection. + Maintain accurate work records. + Utilize precision measuring instruments to inspect parts. + Support our team concept and learn/perform other duties as required. + Communicate effectively and professionally with others, both written and verbal. + Follow and promote safe work practices. + Support LEAN initiatives. + Lift light to medium weight in an environment that may occasionally require crouching, stooping and/or awkward work positions. **Required qualifications:** + High School diploma or equivalent + 1+ year of machining experience + CNC Machining **Desirable characteristics** + Strong analytical and problem-solving skills + Ability to read, understand, and utilize procedures, sketches, and blueprints as well as perform basic mathematical calculations. + Working knowledge of precision measuring equipment and demonstrated ability to work within a team environment. + Milling and Turning experience _This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Major Tool & Machine (MTM) takes great pride in the talented people that come to work here. We offer market leading pay, benefits, optional 4/10 work schedule, quarterly bonus potential and a culture focused on employee engagement. Our work is essential to the world as we provide CNC machining, manual and robotic welding, engineering, program management, inspection, assembly and cleanroom services on a large scale projects to our customers in the Space, Defense, Energy, Nuclear, and Commercial Industries. Whether you are looking for a place to put your current strong skills to work in a more challenging, purpose filled environment, or you ultimately want long term professional growth and advancement opportunities, this could be the place for you. We are looking for experienced CNC Machinists for second and third shifts. Custom machining including setup and run, while applying your knowledge of machining principles, shop math, blueprint reading, GD&T. Job Duties Read and interpret blueprints, sketches, drawings, routing instructions, manuals, specifications or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations and setup requirements. Properly select, align and secure work holding. Must be able to improvise setups using common tooling such as risers, angle plates etc. Monitor and/or develop speed, feed, depth or angle of cut during machining operations. Must observe machine operation to predict or detect malfunctions or out of tolerance machining conditions and adjust machine controls /control media as required. Verify that all machined details meet print and router specifications, using precision measuring instruments and recording data results. Responsible to ensure first piece inspection is completed for multiple piece runs. Monitor and maintain proper cleanliness of machine and work area on a daily basis. Requirements A minimum of two years of trade school, vocational education or apprenticeship A minimum of three to five years of CNC machining experience General machining knowledge, shop math, precision measuring instruments, blueprint reading and GD&T Part and tool probing Experience with high speed machining preferred (16 - 27k RPM) Some openings may require specialized experience with particular machining processes or equipment Experience with Siemens 840D Control software a plus Candidates should: Present a positive attitude Be able to work well with meeting deadlines Have a good work ethic and attendance Have the ability to communicate well with peers, engineers and leadership About Major Tool Major Tool & Machine (MTM) was founded in 1946, starting with only four employees to support the commercialization of the jet engine following World War II. Today, MTM is a contract manufacturer in Indianapolis, Indiana with a 600,000+ sq ft. manufacturing facility, 400+ skilled employees, best-in-industry business and quality systems, and project management expertise. Located for easy access on the east side of downtown Indianapolis, we are short commute away from most any place in the counties surrounding Indianapolis. Major Tool is a Precinmac company, a portfolio of businesses across the US and Canada that provide similar machining, fabrication and other manufacturing services to customers who provide critical services in turn in their various industries. Our Precinmac values are Trust, Gratitude, Action, Excellence and Growth, with a commitment to live these out daily in our workplaces. Benefits Excellent Benefits including three health insurance plan options - with a base plan option requiring ZERO employee paid premium. Dental and vision plans have very reasonable employee premiums. Participants in our health insurance have the onsite clinic available at no additional charge for medical services. All employees can access the mental health services provided in the clinic, For HDHP health insurance options, we contribute to your health savings account (HSA) and offer other flexible spending account (FSA) options. We support your retirement goals with a 401k company match. In addition to work schedule options we provide immediate Paid Time Off (PTO) availability and 10 paid Holidays, Along with in house training programs, we offer educational assistance for coursework that will support your career growth at Major Tool, We care about the health of our employees and provide a tobacco free facility, onsite fitness center and wellness events, short and long term disability and life insurance coverage fully paid. We are proud to be an Equal Opportunity Employer. We follow all applicable non-discrimination laws relating to employment, including consideration of candidates with disability or veteran status.

Job DescriptionDescription: About Precision Products: We are a locally owned modern machine shop located in Greenwood Indiana that utilizes CNC and manually operated equipment. We have served many different industries for over 50 years. We are ISO 9001:2015 certified and produce forge tooling, carbon fiber molds and plastic closure molds just to name a few. Our 45,000 square foot climate controlled facility offers year around comfort and cleanliness is a priority. Work Schedule: Day shift is from 7:00am to 5:45pm Monday thru Thursday and 7:00am to 3:45pm on Friday. Lunch break is from 12:00pm to 12:45 pm each day. Standard work week is 48 hours with some flexibility. Additional overtime is available if desired. Job Summary: Operate CNC Milling Machine to produce the required parts. Monitor the machining operation to insure proper results. Read and follow process sheets and drawings to perform machining operations. Follow required quality control procedures. Minimum yearly pay $48,000.00 based on 48 hours a week 52 weeks a year. Other duties as assigned. Benefits: 401(k) 401(k) Employer Match Health Insurance Dental Insurance Vision Insurance Life Insurance Paid Vacation 6 Paid Holidays - New Years, Memorial Day, 4th of July, Labor Day, Thanksgiving, Christmas Earned Overtime Pay Incentive Earned Quarterly Paid Time Off Reimbursement of company apparel - 50% Yearly $50.00 safety shoe allowance Requirements: Education: High School Diploma or GED, any trade or vocational school is a plus. Experience Level: It is always preferred but we are willing to train a motivated candidate. Physical Ability: Occasional lifting up to 50 pounds, able to stand and push loaded carts. Able to stand in work area during your shift. Personnel Tools: It is preferred candidate has some tools, but not a requirement. Precision Products provides specific gages as required for the operation.

~$3,000 SIGN-ON BONUS~ The tool and die maker will oversee daily operations and ensure the efficiency and efficacy of all processes and procedures related to tooling repairs, new tooling, fixtures, and gauges. The ideal candidate for this position is a team player and a motivated problem-solver with an inquiring mind who can produce high-quality work under pressure. Summary of essential job functions: Use sketches, blueprints, specifications and models to plan operations for the fabrication of dies, tools and assemblies, ensuring safety and maximum efficiency Verify dimensions of finished parts to ensure they conform to specifications using dial indicators, gauge blocks, calipers and micrometers Utilize hand and machine tools to assemble parts of tools and dies and to repair and modify gauges, jigs and dies Diagnose and troubleshoot problems and perform repairs on tools, manually operated dies and progressive dies Interface with external and internal customers, handle supplier and customer concerns, and work with team members to solve problems during the production process Select the appropriate metals and materials to be used based on properties, ensuring they meet project specifications Oversee implementation of new tooling and fixtures Examine existing tooling and suggest improvements Contribute to development of health and safety standards Clearly communicate ideas and findings to management and colleagues Other duties as assigned Beneficial Skills and Experience Blueprint reading and GD&T Process knowledge of machining, stamping, forming, etc. Work well with constant changing priorities Attention to detail Accurate mathematical calculation skills Customer driven focus - dependable and able to meet and exceed delivery schedules Collaboration and teamwork to deliver results Minimum requirements: At least five years of industry experience is preferred. Extraordinary Benefits: BRAND NEW State of the Art Facility in Greenwood! Lion Cub Benefit: Any Lionshead employee who has a baby during their employment, is eligible for a $250 gift certificate : 3 weeks paid Vacation. Annual flu shots Training and Mentoring Programs Health, Dental, Vision Plans: After 90 days, employees are eligible to join these plans for themselves and their families. 401K: After 30 days Job Type: Full-time

CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers and consumers alike. With operations in 39 countries employing almost 27,000 people and net sales of over $11 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated and driven individuals. Division Overview Crown's Food Division is the number one manufacturer of food cans in the world. Our complete array of food packaging serves a variety of markets, including fruit, vegetables, dairy, fish, meat, ready meals, pet food, infant milk powder and other dry food products. We offer a wide selection of food cans from round to bowl as well as shaped cans. We truly focus on excellence. Here is your chance to join the Crown Food Division. Job Summary: The Maintenance Machinist is responsible for supporting plant operations through continuous improvement activities and day-to-day operations. Help identify opportunities and solve complex problems following a logical problem solving approach. Work hands-on and utilize a variety of skills such as fabrication to help expand improvement initiatives throughout the entire plant Responsibilities: This position will report to the plant engineer and may be given direction by the on-shift production supervisor. Evaluate current business practices, looking for ways to improve productivity, reduce costs, and make the best use of the business's resources. Diagnose equipment performance concerns and have the ability to initiate, and fabricate improvement designs for production demands, coordinate consensus resolution with operations, and maintenance support groups internal and external to the facility. Self motivation and ability to make decisions in a timely manner with little to no supervision is a must. Succeeding in a cross functional team environment with the ability to work alongside all departments and associates throughout the facility. Support operations line performance, working closely with team associates for achievement of line performance goals. Ability to troubleshoot production equipment. Perform assigned maintenance tasks on time and document all work, preventative and breakdown related. Maintain department/work area/shop cleanliness, knowledge of GMPs and SOPs. Utilize root cause analysis to resolve equipment breakdown and performance issues. Install new and repair existing equipment from written specifications such as blueprints, equipment manuals, engineering sketches, and verbal instruction. Ability to perform preventive maintenance, inspection, and general mechanical repairs and service in all areas in the facility. Ability to design and fabricate from your own ideas with no supervision, various precision parts, improvements to machines etc. with emphasis on close tolerances using maintenance shop equipment including but not limited to lathes, mills, surface grinders, drill presses etc. in a fast paced environment. Strong fabrication experience with welding, stainless steel, arc welding, brazing and metal forming. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Rebuild machines and equipment when needed. Make adjustments to equipment and instruct operators how to do the same. Work overtime when needed to either complete a job already in process or covering for maintenance absences. Own your own tools and know how to use hand tools properly. Must maintain a forklift licenses. Proper use of measuring devices such as feeler gauge, micrometers, test indicators to a tenth of thousands. Need to know procedures for the following. The ability to work with others under many conditions such as heat, oil and dirt, etc. General knowledge of production maintenance, priorities and protocol. Lock Out/ Tag Out procedures. This position is on day shift. Must be able to work any shifts and overtime when required. Any other duties assigned by management. JOB REQUIREMENTS: The ideal candidate will possess the following: 5+ years experience in a machine shop. Proven ability to effectively manage multiple projects/tasks at the same time. Effective and proven communication skills (both written and verbal) working in a team environment. Must be able to work daily overtime including on Saturdays and Sundays when needed. Must have the ability to lift up to fifty (50) pounds on occasion and regularly stand, reach, stoop, kneel, crouch or crawl. This position may also require climbing or balancing. Pass physical/drug test, background check, reference checks. Crown offers a competitive and comprehensive benefits package including medical/dental/vision/prescription/ life insurance and income protection benefits as well as a company funded pension plan, 401(K), stock purchase, tuition reimbursement and gain sharing programs. Also, as part of our Total Safety Culture, Crown is committed to the safety, health and well-being of all of our employees and their families. EEO/AA/Vets/Disabled.

Job Description Trucent, Inc. is a global leader in fluid recovery and regeneration solutions helping manufacturers and producers achieve operational excellence by incorporating sustainable processes. We are committed to demonstrating leading-edge sustainable solutions and approaches to industrial production and materials management. Our customer-centric solutions include Fluid Separation for Metalworking and Manufacturing, Industrial Fluid Control, Plant Process Optimization, Corn Oil Extraction, and Oil Flow Optimization. To build upon a track record of growth and success, we are seeking a Manuel lathe and mill machinist in Noblesville, IN. This person will be responsible for day-to-day work activities to support and complete the repair, refurbishment, and general maintenance of the high speed disc stack centrifuges. The ideal candidate has extensive experience in machine fabrication and strong experience working with manual mills and lathes. This position is a 1st shift, Monday - Friday position that offers full benefits with primum PPO, 401K with company match, and competitive health benefits. The position would pay $30-$42 per hour based on experience. Other Responsibilities will include: Document and perform equipment repairs, cleaning, preventative maintenance, calibration, etc. and complete all required paperwork. Maintain service logs on equipment. Filling internal and external parts requests, including preparing packing lists, packing and shipping. Trouble shooting and conducting root cause analysis for incoming work and per customer requests. Assist with work estimating as it relates to required parts for repair and labor hours. Local pickup and delivery of parts and equipment as needed. Help maintain work areas and machinery to assure proper and safe working atmospheres. Perform other related duties or special projects as required. Comply with all aspects of the Trucent safety program, including but not limited to: hazard communication, PPE requirements and attending quarterly safety training. Fill in for vacations, emergency services, etc. Adhere to all company policies, procedures, and business ethics. Position Qualifications: Education: Requires a high school education or equivalent plus additional specialized training in industrial maintenance & inventory management. The ideal candidate will have experience with welding, pipe fitting, strong mechanical abilities, and a strong independent work ethic. Experience: Requires a minimum of 5-8 years' experience in industrial maintenance and/or inventory management to gain sufficient skill to perform the requirements of the position. Skills and Abilities, which may be representative but not all inclusive of those commonly, associated with this position: Good personal communication skills and ability to work well with others. General knowledge of the skill trades including mechanical, plumbing, and electrical troubleshooting skills. Strong mechanical aptitude. General understanding of fluid dynamics Customer relations & problem resolution skills. Effective time management skills and attention to detail. Basic familiarity with PCs. Ability to work independently under general supervision. Perform reading, writing, and speaking at a basic level. Perform the basic functions of arithmetic; add, subtract, multiply and divide all units of measure. Demonstrate a basic understanding of specifications, blueprints, manuals, and mechanical drawings and have a general understanding of analytical methods. Ability to apply rational principles to solve practical problems and deal with several concrete variables in standardized situations and to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Travel Requirements: None Trucent provides equal employment opportunities (EEO) to all employees and applicants without regard to race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.