Maintenance electrician jobs in Saint Joseph, MO - 295 jobs

Hotel: Kansas City Residence Inn 10300 N Ambassador Dr. Kansas City, MO 64153 Full time. Compensation: $20.48 Atrium SPIRIT where teamwork, passion and appreciation ignite service excellence Whats in it for you? The Atrium SPIRIT is a belief in th Maintenance Technician, Technician, Maintenance, General Maintenance, Healthcare

Electrician, Maintenance Under general supervision, performs the full range of skilled, journeyman level Electrician duties in order to support the education mission of the District and to enhance the education environment. The maintenance electrician will work as part of a team to Install, inspect, troubleshoot and repair electrical wiring, fixtures, control devices and related systems for the school district. DUTIES AND RESPONSIBILITIES: Performs skilled maintenance and repair of building structures, equipment and facilities, with major emphasis on electric systems and components Install, maintain, troubleshoot and repair electrical wiring, fixtures control devices and equipment. Diagnose, locate the cause of, and repair malfunctioning systems and components using test equipment. Perform preventative maintenance through inspection of electrical systems, equipment and components. Ensure all work performed adheres to all relevant organizational, and municipal safety regulations, codes and specifications. Maintains accurate records using District provided work order system. In coordination with other departments, will participate in larger maintenance and repair operations as needed. Estimates, determines needs, and arranges for supplies and equipment in order to perform or schedule work assignments. Promote quality workmanship and productivity. Keeps immediate supervisor and/or Director of Physical Properties advised of current maintenance situation and work schedules. Other duties as directed by the Director of Physical Properties or assigns. QUALIFICATIONS: Good oral and written communication skills. General knowledge of building construction and systems, and repair terminology. General knowledge of line voltage and low voltage electrical systems and maintenance trades in a commercial environment. Ability to measure, cut, bend, thread, assemble, and install rigid galvanized electrical conduit, using tools such as a pipe threader, conduit bender and other standard tools of the trade. Ability to interact with supervisors, staff, vendors, co-workers and the public using a positive, collaborative approach. Ability to problem solve and engage necessary staff/supervisors to address facility issues. Initiative and ability to work with minimal direction or monitoring; sound judgment and decision making capabilities are essential. Ability to coordinate, organize, schedule and assign work when necessary. Ability to perform well under stress and meet deadlines. Ability to perform all requirements of a preventive maintenance technician. Numerical ability required to make proper calculations. Ability to read and understand blueprints and specifications of new construction, installation, and maintenance of equipment. Strong organizational ability EDUCATION, TRAINING AND EXPERIENCE: High school, trade and/or vocational school graduation and completion of union, private, military or trade school apprenticeship program that includes theory and on-the-job training. Minimum of four (4) years' work experience as a Journey-level electrician or equivalent work experience with an emphasis in a commercial, educational or facilities operations setting. Preferred:Knowledge of public schools or university operations. PHYSICAL DEMANDS AND WORKING CONDITIONS: Work is medium to heavy. Routinely handles loads weighing up to 50 pounds and occasionally handles loads weighing up to 100 pounds or more, using appropriate equipment and/or lifting techniques. Walks and stands most of the day. Stooping and climbing as required. Must be able to work at heights. Requires near-visual acuity and good color vision to inspect and approve repair and maintenance, read blueprints, building code manuals, and other documents. Works both inside and outside. The work environment may be subject to loud noise from machinery, equipment and tools. May be required to work long hours. DRIVER'S LICENSE: Employee shall have a valid driver's license at the time of his/her employment with the Kansas City Kansas USD #500 School District. IF, at any time during his/her employment, the employee should lose their driver's license and/or their driver's license suspended for any reason, the employee shall immediately notify the Director of Physical Properties. PRE-EMPLOYMENT/YEARLY REQUIREMENTS: Employee shall meet all the pre-employment and yearly requirements as specified in the Policies of the Board of Education. PERFORMANCE EVALUATION: Performance of this position will be evaluated in accordance with the provisions of the Board's policy on Evaluation of Classified Human TERMS OF EMPLOYMENT: 261 days SALARY: Based on the USD #500 Salary Schedule. FLSA STATUS: HOURLY, NON-EXEMPT REPORTS TO: Director of Physical Properties Applications will be reviewed prior to the closing date for this position. The information contained in this job description is for compliance with the Americans with Disabilities Act (A.D.A.) and is not an exhaustive list of the duties performed for this position. The individual holding this position performs additional duties and additional duties may be assigned. Kansas City, Kansas Public Schools is an Equal Opportunity Employer. KCKPS is an equal opportunity employer and shall not discriminate in its employment practices and policies with respect to hiring, compensation, terms, conditions, or privileges of employment because of an individual's race, color, religion, sex/gender (to include orientation, identity, or expression), age, disability, national origin, genetic information, or any other basis prohibited by law. For more information regarding Title IX please contact: District Compliance Coordinator 2010 N. 59th Street Kansas City, KS 66104 ************ *****************

JOB TITLE\: Lineman Journeyman REQUISITION\: DIS00WR DEPARTMENT\: St Joseph PAY\: $55.87 Headquartered in both Kansas City and Topeka, Evergy employs about 4,900 people who are dedicated to empowering a better future. We are currently seeking qualified candidates for Lineman Journeyman in St Joseph, Missouri. BRIEF DESCRIPTION OF DUTIES Constructs, tests, maintains, removes, repairs, and operates the underground and overhead distribution system. Performs all electrical and non- electrical related duties. Does substation work requiring the skills and knowledge of a Journeyman Lineman. Performs all work in a safe manner and in accordance with the Company's established safety rules and guidelines. Participates in regular safety training as scheduled. Drives and keeps trucks, equipment, and tools in clean condition and makes written report of vehicle or equipment trouble to Fleet Services. Mounts and removes chains when necessary. Performs minor, operator - level service on trucks in the field that does not require the installation or removal of parts. Helps or changes tires in the field. Operates equipment necessary to perform work assigned including, but not limited to, bucket trucks, digger derricks, pressure diggers, boom trucks, trenchers, and other equipment. Performs tree trimming when necessary to accomplish the work. Performs other minor duties of a similar or related nature that are incidental to the work of this classification and not in conflict with the collective bargaining agreement. EDUCATION\: High School or equivalent EXPERIENCE\: Candidates who have not performed the work of Journeyman Lineman at Evergy must be able to document successful completion of a recognized apprenticeship program for Journeyman Lineman or have a minimum of two years' work experience as a Journeyman Lineman. Experience must include documented, satisfactory performance of all standard tasks and responsibilities of a distribution lineman working for a public electrical utility and/or recognized utility contracting company. ESSENTIAL JOB FUNCTIONS\: Must be able to perform all essential job functions as identified by the Company. Reasonable accommodations may be made upon request to enable an individual with a disability to perform the essential functions. GENERAL\: Must have a Class B CDL & be able to possess/maintain a Class A CDL within 90 days of employment. Must be DOT certified as required by federal law Selected applicants will be required to perform and successfully complete a written test as well as a skills demonstration. Evergy has a clear mission - To empower a better future. Evergy chooses to live this mission by valuing People First. We know that to lead the responsible energy transition and provide affordable, reliable, and sustainable service to our customers and communities, we need a team with a variety of backgrounds, perspectives and skills. We are committed to building a team where everyone - regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status - has a voice and can bring their best every day. Evergy is proud to be an equal opportunity workplace and is an affirmative action employer.

Lineman - Journeyman - (DIS00QF) JOB TITLE: Lineman - Journeyman REQUISITION: DIS00QF DEPARTMENT: Line Department PAY: $52.66 Headquartered in both Kansas City and Topeka, Evergy employs about 4,900 people who are dedicated to empowering a better future. We are currently seeking qualified candidates for Lineman - Splicer Journeyman at multiple locations, wage rate $52.66. BRIEF DESCRIPTION OF DUTIES Constructs, tests, maintains, removes, repairs, and operates the underground and overhead distribution system. Performs all electrical and non- electrical related duties. Does substation work requiring the skills and knowledge of a Journeyman Lineman. Performs all work in a safe manner and in accordance with the Company's established safety rules and guidelines. Participates in regular safety training as scheduled. Drives and keeps trucks, equipment, and tools in clean condition and makes written report of vehicle or equipment trouble to Fleet Services. Mounts and removes chains when necessary. Performs minor, operator - level service on trucks in the field that does not require the installation or removal of parts. Helps or changes tires in the field. Operates equipment necessary to perform work assigned including, but not limited to, bucket trucks, digger derricks, pressure diggers, boom trucks, trenchers, and other equipment. Performs tree trimming when necessary to accomplish the work. Performs other minor duties of a similar or related nature that are incidental to the work of this classification and not in conflict with the collective bargaining agreement. EDUCATION: High School or equivalent EXPERIENCE: Candidates who have not performed the work of Journeyman Lineman at Evergy must be able to document successful completion of a recognized apprenticeship program for Journeyman Lineman or have a minimum of two years' work experience as a Journeyman Lineman. Experience must include documented, satisfactory performance of all standard tasks and responsibilities of a distribution lineman working for a public electrical utility and/or recognized utility contracting company. ESSENTIAL JOB FUNCTIONS: Must be able to perform all essential job functions as identified by the Company. Reasonable accommodations may be made upon request to enable an individual with a disability to perform the essential functions. GENERAL: Must have Class A CDL and be D.O.T certified as required by federal law Evergy has a clear mission - To empower a better future. Evergy chooses to live this mission by valuing People First. We know that to lead the responsible energy transition and provide affordable, reliable, and sustainable service to our customers and communities, we need a team with a variety of backgrounds, perspectives and skills. We are committed to building a team where everyone - regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status - has a voice and can bring their best every day. Evergy is proud to be an equal opportunity workplace and is an affirmative action employer. Disclaimer: The above information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Work Locations: F&M Service Center - Floor 01 4400 E Front St Kansas City 64120-1039Job: Distribution OperationsShift: Unposting Date: Ongoing

Key Accountabilities Inspect, troubleshoot, and repair all plant mechanical equipment as directed by the Mechanical Maintenance Foreman. Conduct periodic inspections of plant equipment and report conditions requiring further evaluation. Communicate regularly with other departments regarding job status, projected completion times, and any need for assistance. Perform basic equipment rigging under supervision. Carry out advanced rebuilds and retrofits of mechanical equipment (e.g., blowers, gearboxes, centrifuges) and perform advanced industrial fabrication as required. Safely operate powered industrial vehicles. Perform basic electrical maintenance and mechanical fabrication tasks as needed. Respond to call-ins during nights, weekends, and holidays for emergency mechanical repairs, ensuring issues are resolved or escalated appropriately. Serve as a liaison with mechanical vendors, coordinating inspections, repairs, parts availability, and verifying labor and material documentation. Monitor replacement part status within assigned areas and notify the Foreman of any concerns. Use plant maintenance software to review open emergency and planned maintenance jobs and accurately document work performed and job status. Maintain safe working conditions and promote safe work practices within the department. Conduct monthly safety meetings and employee training to support a zero lost-time injury record. Perform all duties in accordance with Quality System Manual procedures. Other duties as assigned. Other Requirements Strong command of oral and written communication in the local language (English preferred). Additional language skills are beneficial. Education High School Diploma or equivalent. Experience Minimum of 5 years of experience in industrial mechanical maintenance. Formal training or practical experience in mechanical repair and maintenance. Knowledge & Skills Strong mechanical aptitude. Understanding of plant operations within assigned areas. Competence in millwright work, machining, heavy equipment maintenance, pipe fitting, and general maintenance. Ability to read and interpret technical drawings for equipment assembly and disassembly. Ability to work in environments involving solvents, lubricants, dust, fumes, and extreme temperatures. Ability to perform physically demanding tasks, including: Constant standing and walking Frequent lifting, climbing, reaching, pushing, and pulling Occasional lifting of objects up to 100 lbs Must possess current US employment authorization; sponsorship not available for this position. EOE

Full-time Electrical Switchgear & Control Technician supporting field service across the Kansas City, KS area and Midwest region. Role focuses on diagnosing, repairing, testing, and maintaining low- and medium-voltage switchgear and protective devices to ensure reliable power distribution. What We Offer (Benefits & Compensation) $30-$40 per hour, based on experience Overtime eligible; typical 40-45 hours per week Full-time, field-based; up to 25% regional travel Pay range aligns with local market data for switchgear technicians. Key Responsibilities - Electrical Switchgear & Control Technician Diagnose electrical faults in LV/MV switchgear using meters, relay test sets, and analysis Repair/replace breakers, relays, contactors, CTs/VTs, switches, cabling, and wiring Execute functional tests: insulation resistance, contact resistance, primary/secondary injection, relay verification Perform preventive maintenance: cleaning, lubrication, torqueing, infrared inspection, calibration Commission or return to service per acceptance/maintenance test specs Respond to emergency calls to minimize downtime and restore service Communicate status and recommendations to customers; capture parts and labor used Document test results and service reports with accurate records retention Follow LOTO and arc-flash safety per NFPA 70E and site procedures Qualifications - Electrical Switchgear & Control Technician High school diploma or equivalent; technical diploma/cert in electrical or electromechanical preferred Proven switchgear service/repair experience with strong troubleshooting Read/interpret one-lines, schematics, and OEM manuals Proficient with test gear: multimeter, megohmmeter, primary/secondary injection, relay test set Knowledge of electrical safety, LOTO, PPE, and arc-flash practices Clear communication and customer service; accurate documentation Independent and team-based work capability Valid driver's license and acceptable driving record Willing to work flexible hours and respond to emergencies; travel up to 25% Midwest Overtime available; typical 40-45 hours per week Preferred Qualifications - Switchgear Service and Repair Technician Familiarity with ANSI/NETA ATS/MTS testing methods and tolerances Experience with power quality analyzers and thermography Basic PLC/HMI awareness for interlocks and controls Physical Requirements - Electrical Switchgear & Control Technician Lift, carry, and maneuver up to 75 lbs Work at heights and in confined spaces Bend, kneel, reach, and stand for prolonged periods Field environments including industrial plants and substations; PPE required #IND1

The Diez Group Kansas City is expanding its operations from warehousing and distribution to production, as a tier one manufacturing supplier of blanked material. We are looking for a Maintenance Technician to join our second shift team. Your position will focus on safe and efficient set-up, changeover, safe operation and troubleshooting of the press machines. The Diez Group is a Hispanic owned minority business that believes in on time delivery of high quality products at a competitive price to its customers. Pay $28.00-$35.00 per hour, based on experience Overtime after 40 hours Double time on Sundays after 40 hours Shift Differential $.75 for second shift Benefits The Company provides a comprehensive health plan. Employees will be eligible to participate in most benefits following 90 days of employment. United Healthcare, Delta Dental and VSP vision insurance Employee contribution is based on tier level coverage selected for each line of coverage. Life Insurance - Basic and Accidental Death & Dismemberment - at no cost for you of 1x's your base salary Short Term - at no cost to you at 60% of base salary 401k Retirement Plan - eligibility for participation after the first of the month following three (3) months of employment Educational Assistance Program Summary/Objective Adjusts, repairs, and maintains all manufacturing, support and facilities equipment. Carries out industrial maintenance functions following good maintenance practices. Participates in the establishment and improvement of new and existing equipment. The primary focus will involve the planned maintenance and corrective maintenance of equipment by performing PM's, documenting work using a computerized maintenance management system and other duties as assigned by the Maintenance Manager. Requirements Essential Functions • Perform maintenance jobs in accordance with the highest standards of efficiency • Participate in continuous improvement projects Adhere to ISO 14001 and IATF 16949 procedures and work instructions. • Maintain the smooth running of the building facilities to include repairs, lighting, electrical systems, maintain plumbing system, alarm system, fire extinguishers, HVAC. • Maintain the smooth running of the grounds. • Maintain the smooth running of all production equipment within the plant • Other duties as assigned by the Maintenance Manager. Qualifications • Strong technical capacity to perform required repairs / maintenance while following safety protocol • Ability to be licensed to operate powered industrial equipment (hilo, crane, manlift) • Able to effectively communicate problems, root cause and corrective actions. • Troubleshooting and analytical skills • Hydraulics and Pneumatics • Electrical Troubleshooting • PLC and VFD electrical experience • Ability to read blueprints and technical documentation • (LOTO) Lockout / Tag-out. • HVAC Experience • Perform all work in an ethical manner • Take imitative when you see something that needs fixing, don't wait for it to break • Ability to manage time. • Team Player • Adhere to attendance policy Supervisory Responsibility This position does not have supervisory responsibilities. Work Environment This job primarily operates in a plant floor environment and required the use of PPE. The job may also require working outdoors or in an office setting. This role routinely uses hand tools and various meters. In addition to standard office equipment such as computers, phones, photocopiers, and filing cabinets. Physical Demands The physical demands described here are representative of those essential functions that must be successfully performed. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, ascending/descending stairs, and climbing all day. The employee must frequently lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The position also requires being able to operate and be certified / licensed to operate powered industrial equipment such as hilo's, manlift's and cranes. Position Type/Expected Hours of Work This is a full-time position, Monday through Friday, weekend work and extended hours as required. Travel This position requires no travel. Required Education and Experience • High school diploma, GED or equivalent Military training and experience required. • 2-3 years proven practical knowledge in Maintenance / mechanical repairs • Lockout / Tag out (LOTO) Experience • Prior experience in the steel / aluminum industry a plus • Able to pass certification of power industrial equipment (hilo, manlift, crane) • Proficient in Microsoft office (Word, Excel, Outlook) AAP/EEO Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of all of the activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may be added, deleted, or change at any time with or without notice. Salary Description $28.00-$35.00 / hour based on experience

The Diez Group Kansas City is expanding its operations from warehousing and distribution to production, as a tier one manufacturing supplier of blanked material. We are looking for a Maintenance Technician to join our second shift team. Your position will focus on safe and efficient set-up, changeover, safe operation and troubleshooting of the press machines. The Diez Group is a Hispanic owned minority business that believes in on time delivery of high quality products at a competitive price to its customers. Pay $28.00-$35.00 per hour, based on experience Overtime after 40 hours Double time on Sundays after 40 hours Shift Differential $.75 for second shift Benefits The Company provides a comprehensive health plan. Employees will be eligible to participate in most benefits following 90 days of employment. * United Healthcare, Delta Dental and VSP vision insurance * Employee contribution is based on tier level coverage selected for each line of coverage. * Life Insurance - Basic and Accidental Death & Dismemberment - at no cost for you of 1x's your base salary * Short Term - at no cost to you at 60% of base salary * 401k Retirement Plan - eligibility for participation after the first of the month following three (3) months of employment * Educational Assistance Program Summary/Objective Adjusts, repairs, and maintains all manufacturing, support and facilities equipment. Carries out industrial maintenance functions following good maintenance practices. Participates in the establishment and improvement of new and existing equipment. The primary focus will involve the planned maintenance and corrective maintenance of equipment by performing PM's, documenting work using a computerized maintenance management system and other duties as assigned by the Maintenance Manager. Requirements Essential Functions * Perform maintenance jobs in accordance with the highest standards of efficiency * Participate in continuous improvement projects Adhere to ISO 14001 and IATF 16949 procedures and work instructions. * Maintain the smooth running of the building facilities to include repairs, lighting, electrical systems, maintain plumbing system, alarm system, fire extinguishers, HVAC. * Maintain the smooth running of the grounds. * Maintain the smooth running of all production equipment within the plant * Other duties as assigned by the Maintenance Manager. Qualifications * Strong technical capacity to perform required repairs / maintenance while following safety protocol * Ability to be licensed to operate powered industrial equipment (hilo, crane, manlift) * Able to effectively communicate problems, root cause and corrective actions. * Troubleshooting and analytical skills * Hydraulics and Pneumatics * Electrical Troubleshooting * PLC and VFD electrical experience * Ability to read blueprints and technical documentation * (LOTO) Lockout / Tag-out. * HVAC Experience * Perform all work in an ethical manner * Take imitative when you see something that needs fixing, don't wait for it to break * Ability to manage time. * Team Player * Adhere to attendance policy Supervisory Responsibility This position does not have supervisory responsibilities. Work Environment This job primarily operates in a plant floor environment and required the use of PPE. The job may also require working outdoors or in an office setting. This role routinely uses hand tools and various meters. In addition to standard office equipment such as computers, phones, photocopiers, and filing cabinets. Physical Demands The physical demands described here are representative of those essential functions that must be successfully performed. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, ascending/descending stairs, and climbing all day. The employee must frequently lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The position also requires being able to operate and be certified / licensed to operate powered industrial equipment such as hilo's, manlift's and cranes. Position Type/Expected Hours of Work This is a full-time position, Monday through Friday, weekend work and extended hours as required. Travel This position requires no travel. Required Education and Experience * High school diploma, GED or equivalent Military training and experience required. * 2-3 years proven practical knowledge in Maintenance / mechanical repairs * Lockout / Tag out (LOTO) Experience * Prior experience in the steel / aluminum industry a plus * Able to pass certification of power industrial equipment (hilo, manlift, crane) * Proficient in Microsoft office (Word, Excel, Outlook) AAP/EEO Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of all of the activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may be added, deleted, or change at any time with or without notice. Salary Description $28.00-$35.00 / hour based on experience

We are looking for a Journeyman Electrician to join our team! A career at Paschal is more than just a job. Here, we value respect, integrity, and service above all else. Paschal provides the tools you need to succeed, both in your career, and in other aspects of your own life. We are serious about maintaining our team-oriented culture centered on our Customers, our Employees, and the Company in that order - while having a lot of fun doing it! What you'll love about working for us : Competitive pay Paid Time Off your first year of employment Paid Holidays Medical, vision, dental, life, accident, and disability insurance Retirement savings with a company match Company paid life insurance Tuition/training reimbursement What you'll be doing: Report to customers' homes and businesses on time and arrive with the general knowledge of the work to be done. Educate customers on system use, maintenance tips and techniques for damage prevention; provide insight and professional suggestions for optimizing system function. Give advice on additional services that may be beneficial to the customers. Install, troubleshoot and repair/replace wiring, outlets, fixtures, panels, etc. Utilize several types of tools, including electrical hand-tools, saws, drills, circuit testing equipment, etc. Determine service requirements by applying technical skills and experience, including performance standards and preventive maintenance experience. Complete all work processes while maintaining safe working conditions and personal safety. Supervise and mentor Apprentice Electricians as needed. Document, in detail, the outcome of every work order. All other duties as assigned. Successful Candidate Must Possess the Following Qualifications: Desire to be part of a winning team Possession of a valid driver's license and good driving record. Possess great mechanical aptitude. Strong ability to read and understand technical instructions. Good written and verbal communication skills. Strong knowledge of equipment, tools and methods commonly applied in electrical services Knowledge of code requirements and safety practices concerning electrical work. Accurate diagnostics ability. Excellent ability to explain technical information to clients. Computer knowledge and the ability to apply the necessary software tools for plumbing duties, such as time keeping, customer billing and applying credit card payments. Applicable state and local electrical licenses. This position is considered a safety sensitive position, successful completion of a preemployment drug screen and background check is required. Paschal Home Services, LLC. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type. All employment decisions are based on business needs, job requirements and individual qualifications without regard to race, color, religion, age, sex, national origin, disability, or any other characteristic protected by federal, state, or local laws.

SUMMARY/OBJECTIVE This position will work directly with the Foreman to coordinate the work of operation and maintenance personnel, including contractor crews, ensuring safe and efficient job performance that produces quality results. Work involves climbing poles, operating bucket and line trucks, and handling high voltages during the construction of electrical distribution facilities. Responsible for enforcement of safety policies and seeing that construction standards are followed. Considerable independent action and leadership are required. Must understand the empowerment concept and encourage other team members to take initiative in planning, coordination, and problem solving for crew activities. Job Responsibilities: Construction, maintenance, and repair of power distribution systems. Operate and maintain the existing distribution system, as well as construct new facilities. Perform work on energized and non-energized circuits. Climb poles, operate a line truck, bucket, back yard machine, and other related equipment. Coordinate work to ensure safe and efficient job performance, producing quality results. Continually learn to read and interpret electrical power circuit plans and specifications. Continually learn the methods, materials, and equipment used. Continually learn construction standards, code requirements, and specifications. Perform any other related duties as required or assigned. Qualifications High school diploma or GED required. Distribution line experience required. Technical knowledge of electricity and electronics preferred. Work well with others. Strong appreciation for the safety of self and co-workers. Strong communication skills (verbal and written). Fundamental knowledge of electricity. Minimum 5 years' experience in the electrical services industry required. OSHA Competent Person Certified is preferred. Strong leadership and interpersonal skills require being very detail-oriented. Possess strong organizational and time management skills. Ability to understand plans/blueprints to ensure projects meet all building/code requirements. Proven success in meeting critical deadlines under stressful conditions. Strong sense of personal responsibility. Commitment to doing quality work while putting safety first. Minimum Requirements Must have 8,000 hours of experience in the occupation and/or be currently qualified in the position of Journeyman Lineman. Must have or obtain a valid driver's license and an acceptable driving record. Must have or obtain a Class "A" Commercial Driver's License with required endorsements. Must have mechanical aptitude, good math skills, and the ability to learn. Must have knowledge of the materials, tools, and equipment to be used. Must have knowledge of various transformer banks, intellirupters, capacitor banks, and other voltage regulating equipment. Must have knowledge of the occupational hazards and proper safety precautions. Must be physically able to lift heavy objects. Must be willing to work in adverse weather conditions. Regularly exposed to mechanical parts; high precarious places; outside weather conditions; and risk of electrical shock. Frequently exposed to vibration Pass pre-employment, random, post-accident, and reasonable suspicion drug screens. Satisfactory results of pre-employment background check. Availability, Physical Demands, and Other REQUIREMENTS Due to the nature and scope of the essential functions, the importance of personal interactions with coworkers and members of the public, and the availability of job-related tools, equipment, and resources at work, the performance of these functions requires regular, consistent availability, accessibility, and presence on-site. A minimum of 40 hours/week may be required to efficiently perform the job duties of this position, including presence at designated internal and external meetings. This position may also require availability and accessibility to respond to and address emergencies and critical situations outside of normal business hours, including evenings and weekends. Environmental & Physical Conditions The work environment conditions described here are representative of those an employee encounters while performing the essential functions of this position. This position primarily works in the field and is exposed to various weather conditions, including extreme temperatures and rainy environments. Outdoor settings involve all types of properties and site conditions, including open spaces, timberlands, urban developments, flat and hilly terrain, building construction sites, and road rights-of-way. Subject to outside weather/driving conditions.

**Best People + Right Culture. These are the driving forces behind JE Dunn's success.** **By hiring inspired people, giving them interesting and challenging work, enabling them with innovative tools, and letting them share in the company's rewards, we've found a sustainable way to grow in our industry for the last 100+ years.** **Our diverse teams around the country strive to enrich lives through inspired people and places everyday, and we need inspired people like you to join us in our pursuit of building perfection.** **Role Summary** The Senior Maintenance Technician provides expertise and oversight for maintenance operations within the facility. This role will also be responsible for advanced troubleshooting and repairs including cutting, welding, and part fabrication. All activities will be performed in support of the strategy, vision and values of JE Dunn. + Autonomy and Decision-Making: Makes decisions on assigned areas of responsibility, provides recommendations to supervisor and refers all exceptions to supervisor, as needed. + Career Path: Various **Key Role Responsibilities - Core** + Reviews schematic diagrams, blueprints, and other technical documentation to determine maintenance and repair needs + Repairs or replaces worn or broken parts within machinery with guidance from facility leadership + Follows all manufacturers specified and internal safety guidelines + Performs repairs in a timely and efficient manner to minimize impact on production operations + Collaborates with Production Team to diagnose performance issues with machinery + Understands production processes and material flows + Updates maintenance documentation accurately to ensure maintenance schedules are followed **Key Role Responsibilities - Additional Core** In addition, this role will be responsible for: + Provides hands-on support for all maintenance operations within the facility + Advises facility leadership on maintenance needs and operations, partners to fully develop 6 to 12 month maintenance schedules including full-facility shutdowns to complete needed repairs + Manages spare parts inventory, identifying business-critical parts and collaborating with procurement to obtain parts and maintain stock of frequently used materials + Ensures all operations are carried out by team members safely + Leads rebuilding of machinery as needed + Participates in review of proposed machinery acquisitions from a maintenance and repair support perspective **Knowledge, Skills & Abilities** + Ability to perform work accurately and completely, and in a timely manner + Communication skills, verbal and written + Ability to follow-up on inquiries in a timely manner + Ability to identify common manufacturing materials and equipment + Ability to build relationships and collaborate within a team, both internally and externally **Education** + High School Diploma or GED (Preferred) + Apprentice and/or Vocational/Technical/Trade training (Preferred) + In lieu of the above requirements, equivalent relevant experience will be considered. **Experience** + 5+ years' experience conducting repairs, maintenance, or installation of manufacturing equipment in an actively operating manufacturing environment (Required) + Experience conducting repairs on complex machinery (Required) + Experience machining equipment parts from raw materials (Preferred) + Experience with electrical systems and repair (Preferred) + Experience repairing and troubleshooting robotic equipment (Preferred) **Working Environment** + Must be able to lift at least to 50 pounds + May be exposed to extreme conditions (hot or cold) + Maintenance facility environment, may be exposed to varying temperatures, moving equipment, noise and exhaust fumes + Must be willing to work non-traditional hours to meet business needs + May require working overtime as needed + Must have reliable transportation + May require use of respirator + Must be comfortable working at projected heights and narrow workspace + Frequent activity: Standing, Walking, Climbing, Bending, Kneeling, Carrying, Swinging, Reaching above Shoulder, Pushing, Pulling, Balancing + Frequent activity: Sitting, Viewing Computer Screen **Benefits Information** The benefits package aligned to this position is Professional Non-Union. Please click the link below for more details. Click here for benefits details. (************************************************************************************ This role is expected to accept applications for at least three business days and may continue to be posted until a qualified applicant is selected or the position has been cancelled. _JE Dunn Construction is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. JE Dunn Construction is a background screening, drug-free workplace._ **_JE Dunn provides reasonable accommodations to qualified individuals with disabilities. If you would like to request a reasonable accommodation in order to apply for a job, please submit your request to_** **_accommodations@jedunn.com_** _JE Dunn Construction Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of JE Dunn Construction without a prior written search agreement will be considered unsolicited and the property of JE Dunn Construction Company. Please, no phone calls or emails._ Requisition ID: 60044 **Why People Work Here** At JE Dunn we offer our employees an inspired place to enrich their life and the lives of those around them **Building on our rich history,** our employee **owners are shaping the future** of JE Dunn. In our team-focused environment **we do life together** and are generously **rewarded for our efforts** **About JE Dunn** For more information on who we are, clickhere. (*********************************** **EEO NOTICES** Know Your Rights: Workplace Discrimination is Illegal (*********************************************************************************************** California Privacy Policy **E-Verify** JE Dunn participates in the Electronic Employment Eligibility Verification Program. E-Verify Participation (English and Spanish) (******************************************************************************************** Right to Work (English) Right to Work (Spanish) (***************************************************************************************************************************** **Nearest Major Market:** Kansas City

To be considered for employment, the person whose name appears on this online application must acknowledge that the application is complete and accurate and must also certify that he or she has read, understands, agrees, and acknowledges the questions asked and answers given in this application. Failure to acknowledge and certify may result in your application being denied. Position Purpose: Assist and work with the Maintenance Supervisor and Community Manager to perform the necessary repairs and preventive maintenance throughout the entire property. This position is responsible for maintenance of the residential apartment homes, public space, outside grounds and equipment. Each community location has pre-designated office hours which this position will need to accompany to ensure community operations are functioning effectively. Key Contributions: Property Appearance/Upkeep: Keep the property in a neat, clean, and well-maintained condition. Daily exterior and interior inspections of the community to assure. Cross utilization of Groundkeeper duties may be required. Appliance Maintenance: Trouble-shoot, diagnose and correct minor failures to air conditioning and heating units. Repair minor electrical and plumbing problems. Make Ready: Responsible for bringing units up to market ready condition in accordance to company standards. Some painting may be required. Laundry room: Maintain laundry rooms to guidelines of the company. Pool Maintenance (if applicable): Completion of daily chemical inspections, maintenance and cleaning to meet city codes and company standards. Customer Service: Ensure that the property meets and exceeds company standards for resident satisfaction and is available for on-call emergencies (i.e. snow removal) per Community Manager's request. Perform other duties as needed. Position Requirements: Education: Pool certification preferred; prefer HVAC certification, boiler certification if appropriate. Physical & Cognitive: Ability to work in a constant state of alertness and safe manner. Frequent standing and walking, as well as occasional sitting. Ability to lift, push, pull, and carry up to 110 pounds. Occasional squatting, reaching, stooping, climbing stairs/ladders, and balancing. If job includes or may include driving for company business: Driver must have a valid driver's license and acceptable motor vehicle record with company insurance carrier Driver must have reliable means of transportation Driver must provide proof of personal auto liability insurance when using vehicles for company business HP123

JOB DETAILS Base Pay: $33.00-$37.00 per hour, plus $1.00 per hour shift differential for 3rd shift 1st Shift: Monday-Friday 7 am-3 pm 3rd Shift: Monday-Friday, 11 pm-7 am Benefits Starting Day 1 On Demand Pay (Access to Your Pay When You Need It) DUTIES AND RESPONSIBILITIES Performs scheduled and emergency maintenance on manufacturing machinery. Corrects problems with hydraulic, pneumatic, electrical and mechanical components, and PLCs. Maintains specified production and spare equipment. Plans and fabricates metal parts (e.g., brackets) for manufacturing application; installs and maintains electrical equipment. Operates and assists maintaining motorized equipment. Performs basic to complex grounds/facilities repairs, as required. Performs basic to complex electrical repairs and installations. Interacts with vendors to complete projects or to repair equipment. Ensures accuracy and safety in all operations. Diagnose root cause of problem and correct issue with mechanical, hydraulic, pneumatic, electrical components and PLCs in plant machinery and equipment Perform routine, preventive, and predictive maintenance on all machinery Maintain and repair motorized equipment Operate manlifts and forklifts; transport heavy parts and equipment Identify needed parts to repair equipment and facility Complete required paperwork to order new parts and to track existing parts Coordinate maintenance of parts inventory with MRO and purchasing personnel Maintain grinders and blowers; adjust and replace blades Fabricate metal parts (e.g., brackets); perform welding as required Perform grounds/facilities repairs, as required Perform all duties required of a Maintenance Technician 2 Maintain work logs, including logs of repairs and alterations to schematics Utilize CMMS for documentation of all equipment maintenance Perform basic to complex electrical repairs and installations Train Maintenance Technicians as required Complete daily forklift safety/damage inspection checks Perform other related duties and assignments as required Train other Maintenance Technicians on job functions Train Extrusion Machine Operators as needed on changeovers and equipment and procedures Maintain supplies at workstation Respond to on-call emergencies as needed Use assigned timecard daily to accurately record time worked Attend weekly shift meetings and/or monthly plant meetings, if required Actively participate in all plant safety programs, depending on location Notify department supervisor if proper tools are not furnished to complete job functions Actively participate in all plant safety programs, depending on location Qualifications High school graduate/GED supplemented by technical school or formal apprenticeship in electrical and mechanical maintenance theory and application Minimum of four years of maintenance experience, at least two years of which must have been in mechanical and electrical maintenance Must have one year of experience as a Maintenance Technician 2, if promoting internally into position Knowledge of basic preventive maintenance scheduling and implementation required Knowledge of basic electrical and mechanical troubleshooting and basic carpentry and tooling Knowledge of OSHA rules and regulations pertaining to equipment Position requires walking, crawling, standing, heavy lifting, bending, twisting, pulling and pushing Should have correctable eyesight and be able to distinguish between colors and pass colorblindness test Ability to coordinate and organize complex tasks Ability to work independently Ability to identify and prepare part orders Must be skilled in production line set-up equipment requirements for all products manufactured Must have excellent mechanical aptitude Must be able to lift up to 86 pounds on a continual basis above shoulder height and below the waist and ability to team lift 87 to 100 pounds Must be able to work well with others Must have excellent math and design aptitude Must be skilled in working with hand and electrical tools Manufacturing plant environment with exposure to equipment noise, temperature extremes, and dust Work involves exposure to high voltage equipment and rapidly moving machinery Outside work during hot and cold weather for emergencies to be expected Amp probe, basic hand tools, hand power tools, O scope, OA torch, plasma cutter, soldering iron, volt meter, hydraulic jack, mill, lathe, saws, sander, grinders, utility knife Forklift/manlift on occasion. Safety glasses, face shields, various gloves, earplugs, steel toed shoes Safe work performance is required from each Technician at all times Additionally, the proper discharge of safety responsibilities is an integral part of each Technician's performance appraisal To perform this job successfully, an individual must be able to perform each essential duty satisfactorily The requirements listed above are representative of the knowledge, skill, and/or ability required Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Additional Information Site Address: 303 W Major St. Kearney, MO 64060 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play . Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here . You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here . If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at ************ or [email protected] . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at ************ or [email protected] . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

EDUCATION\: High School or equivalent EXPERIENCE\: Candidates who have not performed the work of Journeyman Lineman at Evergy must be able to document successful completion of a recognized apprenticeship program for Journeyman Lineman or have a minimum of two years' work experience as a Journeyman Lineman. Experience must include documented, satisfactory performance of all standard tasks and responsibilities of a distribution lineman working for a public electrical utility and/or recognized utility contracting company. ESSENTIAL JOB FUNCTIONS\: Must be able to perform all essential job functions as identified by the Company. Reasonable accommodations may be made upon request to enable an individual with a disability to perform the essential functions. GENERAL\: Must have Class A CDL and be D.O.T certified as required by federal law Evergy has a clear mission - To empower a better future. Evergy chooses to live this mission by valuing People First. We know that to lead the responsible energy transition and provide affordable, reliable, and sustainable service to our customers and communities, we need a team with a variety of backgrounds, perspectives and skills. We are committed to building a team where everyone - regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status - has a voice and can bring their best every day. Evergy is proud to be an equal opportunity workplace and is an affirmative action employer. JOB TITLE: Lineman - Journeyman REQUISITION: DIS00QF DEPARTMENT\: Line Department LOCATIONS: Kansas City, Missouri (Multiple Locations) PAY\: $52.66 Headquartered in both Kansas City and Topeka, Evergy employs about 4,900 people who are dedicated to empowering a better future. We are currently seeking qualified candidates for Lineman - Splicer Journeyman at multiple locations, wage rate $52.66. BRIEF DESCRIPTION OF DUTIES Constructs, tests, maintains, removes, repairs, and operates the underground and overhead distribution system. Performs all electrical and non- electrical related duties. Does substation work requiring the skills and knowledge of a Journeyman Lineman. Performs all work in a safe manner and in accordance with the Company's established safety rules and guidelines. Participates in regular safety training as scheduled. Drives and keeps trucks, equipment, and tools in clean condition and makes written report of vehicle or equipment trouble to Fleet Services. Mounts and removes chains when necessary. Performs minor, operator - level service on trucks in the field that does not require the installation or removal of parts. Helps or changes tires in the field. Operates equipment necessary to perform work assigned including, but not limited to, bucket trucks, digger derricks, pressure diggers, boom trucks, trenchers, and other equipment. Performs tree trimming when necessary to accomplish the work. Performs other minor duties of a similar or related nature that are incidental to the work of this classification and not in conflict with the collective bargaining agreement.

Job Description Full-time Electrical Switchgear & Control Technician supporting field service across the Kansas City, KS area and Midwest region. Role focuses on diagnosing, repairing, testing, and maintaining low- and medium-voltage switchgear and protective devices to ensure reliable power distribution. What We Offer (Benefits & Compensation) $30-$40 per hour, based on experience Overtime eligible; typical 40-45 hours per week Full-time, field-based; up to 25% regional travel Pay range aligns with local market data for switchgear technicians. Key Responsibilities - Electrical Switchgear & Control Technician Diagnose electrical faults in LV/MV switchgear using meters, relay test sets, and analysis Repair/replace breakers, relays, contactors, CTs/VTs, switches, cabling, and wiring Execute functional tests: insulation resistance, contact resistance, primary/secondary injection, relay verification Perform preventive maintenance: cleaning, lubrication, torqueing, infrared inspection, calibration Commission or return to service per acceptance/maintenance test specs Respond to emergency calls to minimize downtime and restore service Communicate status and recommendations to customers; capture parts and labor used Document test results and service reports with accurate records retention Follow LOTO and arc-flash safety per NFPA 70E and site procedures Qualifications - Electrical Switchgear & Control Technician High school diploma or equivalent; technical diploma/cert in electrical or electromechanical preferred Proven switchgear service/repair experience with strong troubleshooting Read/interpret one-lines, schematics, and OEM manuals Proficient with test gear: multimeter, megohmmeter, primary/secondary injection, relay test set Knowledge of electrical safety, LOTO, PPE, and arc-flash practices Clear communication and customer service; accurate documentation Independent and team-based work capability Valid driver's license and acceptable driving record Willing to work flexible hours and respond to emergencies; travel up to 25% Midwest Overtime available; typical 40-45 hours per week Preferred Qualifications - Switchgear Service and Repair Technician Familiarity with ANSI/NETA ATS/MTS testing methods and tolerances Experience with power quality analyzers and thermography Basic PLC/HMI awareness for interlocks and controls Physical Requirements - Electrical Switchgear & Control Technician Lift, carry, and maneuver up to 75 lbs Work at heights and in confined spaces Bend, kneel, reach, and stand for prolonged periods Field environments including industrial plants and substations; PPE required #IND1

The Diez Group Kansas City is expanding its operations from warehousing and distribution to production, as a tier one manufacturing supplier of blanked material. We are looking for a Maintenance Technician to join our second shift team. Your position will focus on safe and efficient set-up, changeover, safe operation and troubleshooting of the press machines. The Diez Group is a Hispanic owned minority business that believes in on time delivery of high quality products at a competitive price to its customers. Pay $28.00-$35.00 per hour, based on experience Overtime after 40 hours Double time on Sundays after 40 hours Shift Differential $.75 for second shift Benefits The Company provides a comprehensive health plan. Employees will be eligible to participate in most benefits following 90 days of employment. United Healthcare, Delta Dental and VSP vision insurance Employee contribution is based on tier level coverage selected for each line of coverage. Life Insurance - Basic and Accidental Death & Dismemberment - at no cost for you of 1x's your base salary Short Term - at no cost to you at 60% of base salary 401k Retirement Plan - eligibility for participation after the first of the month following three (3) months of employment Educational Assistance Program Summary/Objective Adjusts, repairs, and maintains all manufacturing, support and facilities equipment. Carries out industrial maintenance functions following good maintenance practices. Participates in the establishment and improvement of new and existing equipment. The primary focus will involve the planned maintenance and corrective maintenance of equipment by performing PM's, documenting work using a computerized maintenance management system and other duties as assigned by the Maintenance Manager. Requirements: Essential Functions • Perform maintenance jobs in accordance with the highest standards of efficiency • Participate in continuous improvement projects Adhere to ISO 14001 and IATF 16949 procedures and work instructions. • Maintain the smooth running of the building facilities to include repairs, lighting, electrical systems, maintain plumbing system, alarm system, fire extinguishers, HVAC. • Maintain the smooth running of the grounds. • Maintain the smooth running of all production equipment within the plant • Other duties as assigned by the Maintenance Manager. Qualifications • Strong technical capacity to perform required repairs / maintenance while following safety protocol • Ability to be licensed to operate powered industrial equipment (hilo, crane, manlift) • Able to effectively communicate problems, root cause and corrective actions. • Troubleshooting and analytical skills • Hydraulics and Pneumatics • Electrical Troubleshooting • PLC and VFD electrical experience • Ability to read blueprints and technical documentation • (LOTO) Lockout / Tag-out. • HVAC Experience • Perform all work in an ethical manner • Take imitative when you see something that needs fixing, don't wait for it to break • Ability to manage time. • Team Player • Adhere to attendance policy Supervisory Responsibility This position does not have supervisory responsibilities. Work Environment This job primarily operates in a plant floor environment and required the use of PPE. The job may also require working outdoors or in an office setting. This role routinely uses hand tools and various meters. In addition to standard office equipment such as computers, phones, photocopiers, and filing cabinets. Physical Demands The physical demands described here are representative of those essential functions that must be successfully performed. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, ascending/descending stairs, and climbing all day. The employee must frequently lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The position also requires being able to operate and be certified / licensed to operate powered industrial equipment such as hilo's, manlift's and cranes. Position Type/Expected Hours of Work This is a full-time position, Monday through Friday, weekend work and extended hours as required. Travel This position requires no travel. Required Education and Experience • High school diploma, GED or equivalent Military training and experience required. • 2-3 years proven practical knowledge in Maintenance / mechanical repairs • Lockout / Tag out (LOTO) Experience • Prior experience in the steel / aluminum industry a plus • Able to pass certification of power industrial equipment (hilo, manlift, crane) • Proficient in Microsoft office (Word, Excel, Outlook) AAP/EEO Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of all of the activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may be added, deleted, or change at any time with or without notice.

Best People + Right Culture. These are the driving forces behind JE Dunn's success. By hiring inspired people, giving them interesting and challenging work, enabling them with innovative tools, and letting them share in the company's rewards, we've found a sustainable way to grow in our industry for the last 100+ years. Our diverse teams around the country strive to enrich lives through inspired people and places everyday, and we need inspired people like you to join us in our pursuit of building perfection. Role Summary The Senior Maintenance Technician provides expertise and oversight for maintenance operations within the facility. This role will also be responsible for advanced troubleshooting and repairs including cutting, welding, and part fabrication. All activities will be performed in support of the strategy, vision and values of JE Dunn. * Autonomy and Decision-Making: Makes decisions on assigned areas of responsibility, provides recommendations to supervisor and refers all exceptions to supervisor, as needed. * Career Path: Various Key Role Responsibilities - Core * Reviews schematic diagrams, blueprints, and other technical documentation to determine maintenance and repair needs * Repairs or replaces worn or broken parts within machinery with guidance from facility leadership * Follows all manufacturers specified and internal safety guidelines * Performs repairs in a timely and efficient manner to minimize impact on production operations * Collaborates with Production Team to diagnose performance issues with machinery * Understands production processes and material flows * Updates maintenance documentation accurately to ensure maintenance schedules are followed Key Role Responsibilities - Additional Core In addition, this role will be responsible for: * Provides hands-on support for all maintenance operations within the facility * Advises facility leadership on maintenance needs and operations, partners to fully develop 6 to 12 month maintenance schedules including full-facility shutdowns to complete needed repairs * Manages spare parts inventory, identifying business-critical parts and collaborating with procurement to obtain parts and maintain stock of frequently used materials * Ensures all operations are carried out by team members safely * Leads rebuilding of machinery as needed * Participates in review of proposed machinery acquisitions from a maintenance and repair support perspective Knowledge, Skills & Abilities * Ability to perform work accurately and completely, and in a timely manner * Communication skills, verbal and written * Ability to follow-up on inquiries in a timely manner * Ability to identify common manufacturing materials and equipment * Ability to build relationships and collaborate within a team, both internally and externally Education * High School Diploma or GED (Preferred) * Apprentice and/or Vocational/Technical/Trade training (Preferred) * In lieu of the above requirements, equivalent relevant experience will be considered. Experience * 5+ years' experience conducting repairs, maintenance, or installation of manufacturing equipment in an actively operating manufacturing environment (Required) * Experience conducting repairs on complex machinery (Required) * Experience machining equipment parts from raw materials (Preferred) * Experience with electrical systems and repair (Preferred) * Experience repairing and troubleshooting robotic equipment (Preferred) Working Environment * Must be able to lift at least to 50 pounds * May be exposed to extreme conditions (hot or cold) * Maintenance facility environment, may be exposed to varying temperatures, moving equipment, noise and exhaust fumes * Must be willing to work non-traditional hours to meet business needs * May require working overtime as needed * Must have reliable transportation * May require use of respirator * Must be comfortable working at projected heights and narrow workspace * Frequent activity: Standing, Walking, Climbing, Bending, Kneeling, Carrying, Swinging, Reaching above Shoulder, Pushing, Pulling, Balancing * Frequent activity: Sitting, Viewing Computer Screen Benefits Information The benefits package aligned to this position is Professional Non-Union. Please click the link below for more details. Click here for benefits details. This role is expected to accept applications for at least three business days and may continue to be posted until a qualified applicant is selected or the position has been cancelled. JE Dunn Construction is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. JE Dunn Construction is a background screening, drug-free workplace. JE Dunn provides reasonable accommodations to qualified individuals with disabilities. If you would like to request a reasonable accommodation in order to apply for a job, please submit your request to accommodations@jedunn.com JE Dunn Construction Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of JE Dunn Construction without a prior written search agreement will be considered unsolicited and the property of JE Dunn Construction Company. Please, no phone calls or emails. Requisition ID: 60044 Why People Work Here At JE Dunn we offer our employees an inspired place to enrich their life and the lives of those around them Building on our rich history, our employee owners are shaping the future of JE Dunn. In our team-focused environment we do life together and are generously rewarded for our efforts About JE Dunn For more information on who we are, click here. EEO NOTICES Know Your Rights: Workplace Discrimination is Illegal California Privacy Policy E-Verify JE Dunn participates in the Electronic Employment Eligibility Verification Program. E-Verify Participation (English and Spanish) Right to Work (English) Right to Work (Spanish)

JOB DETAILS Base Pay: $33.00-$37.00 per hour, plus $1.00 per hour shift differential for 3rd shift 1st Shift: Monday-Friday 7 am-3 pm 3rd Shift: Monday-Friday, 11 pm-7 am Benefits Starting Day 1 On Demand Pay (Access to Your Pay When You Need It) DUTIES AND RESPONSIBILITIES Performs scheduled and emergency maintenance on manufacturing machinery. Corrects problems with hydraulic, pneumatic, electrical and mechanical components, and PLCs. Maintains specified production and spare equipment. Plans and fabricates metal parts (e.g., brackets) for manufacturing application; installs and maintains electrical equipment. Operates and assists maintaining motorized equipment. Performs basic to complex grounds/facilities repairs, as required. Performs basic to complex electrical repairs and installations. Interacts with vendors to complete projects or to repair equipment. Ensures accuracy and safety in all operations. * Diagnose root cause of problem and correct issue with mechanical, hydraulic, pneumatic, electrical components and PLCs in plant machinery and equipment * Perform routine, preventive, and predictive maintenance on all machinery * Maintain and repair motorized equipment * Operate manlifts and forklifts; transport heavy parts and equipment * Identify needed parts to repair equipment and facility * Complete required paperwork to order new parts and to track existing parts * Coordinate maintenance of parts inventory with MRO and purchasing personnel * Maintain grinders and blowers; adjust and replace blades * Fabricate metal parts (e.g., brackets); perform welding as required * Perform grounds/facilities repairs, as required * Perform all duties required of a Maintenance Technician 2 * Maintain work logs, including logs of repairs and alterations to schematics * Utilize CMMS for documentation of all equipment maintenance * Perform basic to complex electrical repairs and installations * Train Maintenance Technicians as required * Complete daily forklift safety/damage inspection checks * Perform other related duties and assignments as required * Train other Maintenance Technicians on job functions * Train Extrusion Machine Operators as needed on changeovers and equipment and procedures * Maintain supplies at workstation * Respond to on-call emergencies as needed * Use assigned timecard daily to accurately record time worked * Attend weekly shift meetings and/or monthly plant meetings, if required * Actively participate in all plant safety programs, depending on location * Notify department supervisor if proper tools are not furnished to complete job functions * Actively participate in all plant safety programs, depending on location Qualifications * High school graduate/GED supplemented by technical school or formal apprenticeship in electrical and mechanical maintenance theory and application * Minimum of four years of maintenance experience, at least two years of which must have been in mechanical and electrical maintenance * Must have one year of experience as a Maintenance Technician 2, if promoting internally into position * Knowledge of basic preventive maintenance scheduling and implementation required * Knowledge of basic electrical and mechanical troubleshooting and basic carpentry and tooling * Knowledge of OSHA rules and regulations pertaining to equipment * Position requires walking, crawling, standing, heavy lifting, bending, twisting, pulling and pushing * Should have correctable eyesight and be able to distinguish between colors and pass colorblindness test * Ability to coordinate and organize complex tasks * Ability to work independently * Ability to identify and prepare part orders * Must be skilled in production line set-up equipment requirements for all products manufactured * Must have excellent mechanical aptitude * Must be able to lift up to 86 pounds on a continual basis above shoulder height and below the waist and ability to team lift 87 to 100 pounds * Must be able to work well with others * Must have excellent math and design aptitude * Must be skilled in working with hand and electrical tools * Manufacturing plant environment with exposure to equipment noise, temperature extremes, and dust * Work involves exposure to high voltage equipment and rapidly moving machinery * Outside work during hot and cold weather for emergencies to be expected * Amp probe, basic hand tools, hand power tools, O scope, OA torch, plasma cutter, soldering iron, volt meter, hydraulic jack, mill, lathe, saws, sander, grinders, utility knife * Forklift/manlift on occasion. Safety glasses, face shields, various gloves, earplugs, steel toed shoes * Safe work performance is required from each Technician at all times * Additionally, the proper discharge of safety responsibilities is an integral part of each Technician's performance appraisal * To perform this job successfully, an individual must be able to perform each essential duty satisfactorily * The requirements listed above are representative of the knowledge, skill, and/or ability required * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Additional Information Site Address: 303 W Major St. Kearney, MO 64060 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. * Full-time is defined as regularly working 30+ hours per week. Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at ************ or *******************************. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at ************ or *******************************. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description JOB DETAILS Base Pay: $33.00-$37.00 per hour, plus $1.00 per hour shift differential for 3rd shift 1st Shift: Monday-Friday 7 am-3 pm 3rd Shift: Monday-Friday, 11 pm-7 am Benefits Starting Day 1 On Demand Pay (Access to Your Pay When You Need It) DUTIES AND RESPONSIBILITIES Performs scheduled and emergency maintenance on manufacturing machinery. Corrects problems with hydraulic, pneumatic, electrical and mechanical components, and PLCs. Maintains specified production and spare equipment. Plans and fabricates metal parts (e.g., brackets) for manufacturing application; installs and maintains electrical equipment. Operates and assists maintaining motorized equipment. Performs basic to complex grounds/facilities repairs, as required. Performs basic to complex electrical repairs and installations. Interacts with vendors to complete projects or to repair equipment. Ensures accuracy and safety in all operations. Diagnose root cause of problem and correct issue with mechanical, hydraulic, pneumatic, electrical components and PLCs in plant machinery and equipment Perform routine, preventive, and predictive maintenance on all machinery Maintain and repair motorized equipment Operate manlifts and forklifts; transport heavy parts and equipment Identify needed parts to repair equipment and facility Complete required paperwork to order new parts and to track existing parts Coordinate maintenance of parts inventory with MRO and purchasing personnel Maintain grinders and blowers; adjust and replace blades Fabricate metal parts (e.g., brackets); perform welding as required Perform grounds/facilities repairs, as required Perform all duties required of a Maintenance Technician 2 Maintain work logs, including logs of repairs and alterations to schematics Utilize CMMS for documentation of all equipment maintenance Perform basic to complex electrical repairs and installations Train Maintenance Technicians as required Complete daily forklift safety/damage inspection checks Perform other related duties and assignments as required Train other Maintenance Technicians on job functions Train Extrusion Machine Operators as needed on changeovers and equipment and procedures Maintain supplies at workstation Respond to on-call emergencies as needed Use assigned timecard daily to accurately record time worked Attend weekly shift meetings and/or monthly plant meetings, if required Actively participate in all plant safety programs, depending on location Notify department supervisor if proper tools are not furnished to complete job functions Actively participate in all plant safety programs, depending on location Qualifications High school graduate/GED supplemented by technical school or formal apprenticeship in electrical and mechanical maintenance theory and application Minimum of four years of maintenance experience, at least two years of which must have been in mechanical and electrical maintenance Must have one year of experience as a Maintenance Technician 2, if promoting internally into position Knowledge of basic preventive maintenance scheduling and implementation required Knowledge of basic electrical and mechanical troubleshooting and basic carpentry and tooling Knowledge of OSHA rules and regulations pertaining to equipment Position requires walking, crawling, standing, heavy lifting, bending, twisting, pulling and pushing Should have correctable eyesight and be able to distinguish between colors and pass colorblindness test Ability to coordinate and organize complex tasks Ability to work independently Ability to identify and prepare part orders Must be skilled in production line set-up equipment requirements for all products manufactured Must have excellent mechanical aptitude Must be able to lift up to 86 pounds on a continual basis above shoulder height and below the waist and ability to team lift 87 to 100 pounds Must be able to work well with others Must have excellent math and design aptitude Must be skilled in working with hand and electrical tools Manufacturing plant environment with exposure to equipment noise, temperature extremes, and dust Work involves exposure to high voltage equipment and rapidly moving machinery Outside work during hot and cold weather for emergencies to be expected Amp probe, basic hand tools, hand power tools, O scope, OA torch, plasma cutter, soldering iron, volt meter, hydraulic jack, mill, lathe, saws, sander, grinders, utility knife Forklift/manlift on occasion. Safety glasses, face shields, various gloves, earplugs, steel toed shoes Safe work performance is required from each Technician at all times Additionally, the proper discharge of safety responsibilities is an integral part of each Technician's performance appraisal To perform this job successfully, an individual must be able to perform each essential duty satisfactorily The requirements listed above are representative of the knowledge, skill, and/or ability required Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Additional Information Site Address: 303 W Major St. Kearney, MO 64060 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at ************ or *******************************. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at ************ or *******************************. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.