Mechanical design engineer jobs in Glendale, AZ - 745 jobs

DRA Global Limited is an international multi-disciplinary engineering, project delivery and operations management group, predominantly focused on the mining, minerals and metals industry. The Group has an extensive track record spanning almost four decades across a wide range of commodities. Our teams have deep expertise in the mining, minerals and metals processing industries, as well as related non-process infrastructure such as, water, and energy solutions. DRA covers all major mining centers with offices across Africa and the Middle East, North and South America, USA and Asia-Pacific. We are seeking a Mechanical Engineer, based out of our Phoenix office. This position is responsible for the engineering and discipline project design activities relating to concept, pre-feasibility, feasibility studies, EPCM and EPC projects. Main functions include (but not limited to): design engineering, technical support, package management, site support, commissioning, and documentation and handover. Engineering Carries out innovative detailed designs as required for specific disciplines following good engineering practices Designs conveyor and piping systems in area of responsibility (checked by relevant BMH or piping technical lead) Ensures that the quality of discipline designs are carried out in accordance with client standards and specifications, industry standards and the relevant legislation Provides design interface between disciplines Ensures certified design information received from vendors, contractors and consultants is accurate and interfaces with other designs Ensures the effective peer review and approval of discipline design Ensures continuous improvement, lessons learnt, value engineering, fit for purpose and latest technologies are implemented Is responsible for the engineering discipline sign off Interfaces with internal and external design and drafting disciplines Provides discipline inputs for studies and proposals Provides engineering support to the site team Performs commissioning discipline activities Manages the mark-up and back droughting of redline drawings Operational Management Provides input into all SHE matters, actively participates, and promotes a total safety culture. Ensures that relevant project procedures are complied with Ensures that fabrication, manufacturing, and construction drawings are issued according to the project programmer Manages the time schedule, cost, quality, risk and scope of assigned procurement packages. Ensures assigned packages are installed / constructed in accordance with the project & vendor specifications Manages, inspects and releases the relevant items of procurement, fabrication and construction within area of discipline and responsibility Participates in the Total Safety Culture of DRA and site safety requirements Assists with the commissioning of the assigned packages in accordance with the project & vendor specifications Ensures that reports are structured, accurate, complete and well presented Displays proactive communication with project team with respect to discipline interface and problem solving Financial Manages personal and design/droughting budget man-hours Manages budget as allocated per discipline/procurement package Ensures designs produced are in accordance with capital budget and quantities Ensures suitable contract management is applied to managed procurement packages Ensures proper change management procedure is adhered to Client Relations Ensures that all interactions with Clients are conducted in professional and respectful manner Ensures that Clients are kept informed and updated on the technical aspects of the project Ensures that DRA remains the Clients engineering service provider of choice Liaises and co-ordinates with the client's discipline engineers to ensure adherence to project and client requirements and specifications PHYSICAL REQUIREMENTS/CONDITIONS While performing duties of this job, you may be required to stand, sit, alternate between sitting and standing, push/pull as necessary, reach overhead or below shoulder level, kneel, squat, stoop, crawl, and work at heights utilizing proper fall protection. Ability to access all areas of the job site and conduct physical evaluations of grounds and equipment including ability to work at high elevations. Personal protective equipment may be required when performing work on-site, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, protective clothing, gloves, and any other PPE as required. Work may be performed on an active mining construction site with various associated risks. EDUCATION/SKILLS/EXPERIENCE REQUIRED Experience of onsite construction and commissioning experience within a multi-disciplinary team in Industrial, Mining & Minerals, Oil & Gas, or equivalent environment. Bachelor's degree in mechanical engineering preferred. Registered as a licensed Professional Engineer in the state of Arizona - desirable. Note: This position is hybrid to Phoenix, AZ with onsite presence required at our Tucson site***** DRA Global is committed to building a diverse and inclusive workplace where everyone feels valued and supported. We believe that diversity strengthens our ability to reach our goals, enhances our reputation, and helps us attract, engage, and retain great people. We welcome applications from individuals of all backgrounds, regardless of gender, age, disability, ethnicity, or any other characteristic. Our values - People, Safety, Trust, Integrity, Excellence, and Courage - reflect our ongoing commitment to equal opportunities and an inclusive culture.

**Compensation is between $85,000 to $95,000 DOE** **Hiring Bonus** At Clark Pacific, exciting building projects are just the beginning! As the West Coast's leading prefabricator of building systems, our talented team of professionals bridge the gap between construction and manufacturing every day, providing solutions and innovations that deliver high-performance structures with enhanced cost, schedule, and safety. It all starts with the Clark Pacific Employee Experience: top talent people working together in an environment that fosters collaboration, growth & development, and compassion. We are great people doing great things, together! We have over 60 years of experience and have successfully contributed to some of the West Coast's most iconic buildings including the Golden 1 Center, the Apple II Campus, the San Francisco 49ers stadium, and the Stanford Escondido Village Graduate Housing to name just a few. When people want to experience, quality, and a partner they can trust, they choose Clark Pacific. Repeat customers, numerous building and environmental stewardship awards, and great employees are some of the things for which we are most proud and grateful. Clark Pacific is seeking a Project Engineer to support our CA locations. Overview of the position: At Clark Pacific, the Project Engineer is a position that facilitates the successful design, fabrication, and installation of architectural and structural building systems. Working as part of an integrated team within a specific business unit, this role applies engineering, project management, problem solving, and communication skills across all levels and disciplines within the organization, significantly contributing to the project success of some of the West Coast's most iconic and exciting prefabricated buildings. Initial activities pertaining to the Design Phase, including, but not limited to: Submittal drawings (floor plans, elevations, material specifications, connection details, Reinforcing details, General panel details, Design approvals, Reinforcement drawings, and Miscellaneous metal drawings. Manufacturing-related activities pertaining to the Production Phase, including, but not limited to: Providing complete shop drawings (panel elements, structural elements, formwork, form change studies, Birdseye, stripping and yard handling studies to facilitate manufacturing, Ensuring purchasing of all required materials and forms, Design lifting hardware, loops, rigging, brackets, and inserts for stripping and handling forces, Provide and maintain a casting schedule, Perform quality checks, and Engage in start-up meetings with manufacturing, and remain engaged throughout each project's life cycle. Field-related activities pertaining to the Erection Phase, including, but not limited to: Preparing crane studies, rigging diagrams, and the overall project erection plan as well as erection sequence, load lists, and diagrams, Coordinate shipping of miscellaneous metal, Coordinate field manpower requirements with Field & Trucking team to alignment to budget, Ensure fall protection plan is in place, Professionally represent the Company at the field erection site, and Inspect erection quality and performance to plan and budget. General project management including, but not limited to: Project performance to contract specifications, budget, and time commitments, Issue identification, problem-solving, resolution, and escalation (as necessary), Coordinate necessary and requested procedure submittals (such as welding, grouting, post-tensioning, etc., Engage with internal resources throughout the Company to contribute, learn, and develop professionally. Preferred Education and Experience BS in Civil Engineering or Mechanical Engineering, or an Engineering-related degree EIT certification preferred Interested? Want to learn more? If you're a hard-working nice person who is smart and curious, and think that this position is right for you, we want to hear from you. Please apply and let's begin the journey. Welcome to Clark Pacific. Let's do great things together! Clark Pacific is an Equal Opportunity Employer #MV-L1

A nationally recognized architectural and engineering consultancy is looking to add a technically sharp and forward-thinking Project Design Engineer - Structural to their team. With offices in key markets and a reputation for innovation and quality, this firm is known for tackling projects that span commercial, civic, and institutional sectors. You're being invited to join a dynamic team where your skills in structural design will be valued, and you'll have plenty of chances to learn and grow alongside talented colleagues in a supportive atmosphere. What You'll Do: Contribute to the design and documentation of building structures using steel, concrete, timber, and hybrid systems. You'll play a key role in ensuring structural elements meet regulatory standards and are thoroughly analyzed for both new construction and renovation initiatives. Work closely with project managers on design intent, deliverables, and timelines. Collaborate with architects, MEP engineers, and other stakeholders to align structural solutions with project goals. Participate in quality checks, internal reviews, and technical coordination across project milestones. Help assess design challenges and offer technical input to guide project direction efficiently. Qualifications: A background in civil or structural engineering with a bachelor's degree is required, and having a postgraduate degree would be a significant advantage. A strong background in structural engineering and building design is expected, with familiarity with a variety of materials and systems. EIT with active progress toward PE/SE licensure, or currently licensed as a PE/SE. Familiarity with relevant building codes and experience using structural modeling tools. Team-first mindset with a track record of positive collaboration and quality execution. Why Join This Firm? Work on impactful projects that are shaping skylines and communities nationwide. Mentorship from experienced professionals and a budgeted path for continuing education. Strong internal culture that promotes autonomy, creativity, and career progression. Benefits include: Comprehensive health, dental, and vision plans 401(k) with match Paid time off and company holidays Annual bonus potential Student loan repayment options Certification/licensure reimbursement Flexible schedules and work/life balance support If you're ready to grow your technical capabilities while making a lasting impact through structural design, this role offers a compelling path forward. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Who is Recruiting from Scratch: Recruiting from Scratch is a specialized talent firm dedicated to helping companies build exceptional teams. We partner closely with our clients to deeply understand their needs, then connect them with top‑tier candidates who are not only highly skilled but also the right fit for the company's culture and vision. Our mission is simple: place the best people in the right roles to drive long‑term success for both clients and candidates. https://www.recruitingfromscratch.com/ Title of Role Machine Learning Operations Engineer Location Phoenix, AZ (On‑site) Company Stage of Funding Early‑Stage, Venture‑Backed Office Type On‑site, Full‑Time Salary Competitive + Equity Company Description We're representing a defense technology company building next‑generation autonomous swarm systems for unmanned ground vehicles (UGVs). The company is applying cutting‑edge machine learning and edge AI to deliver low‑cost coordinated robotic fleets capable of executing complex missions across multiple domains. The leadership team brings decades of experience in self‑driving vehicles, aerospace, and defense, and the company is rapidly scaling its engineering team in Phoenix, AZ to meet growing demand. What You Will Do As a Machine Learning Operations Engineer, you'll design, build, and maintain the ML infrastructure that powers perception and autonomy across vehicle swarms. You will: Design and implement end-to-end ML pipelines for training, validation, and deployment of perception models. Build robust data management systems for large‑scale sensor data (cameras, LiDAR, IMU) from field operations. Implement model monitoring, A/B testing, and performance tracking systems for deployed models. Develop CI/CD pipelines for model versioning, testing, and deployment to fleets of autonomous UGVs. Create distributed computing solutions for large‑scale data processing and model training. Build internal tools for data annotation, evaluation, and performance visualization. Collaborate with perception engineers, robotics teams, and field ops to ensure seamless deployment. Ideal Background 2+ years of industry experience in MLOps, DevOps, or ML infrastructure. Bachelor's degree in computer science, engineering, or related field. Strong experience with ML pipeline orchestration tools (e.g., Kubeflow, MLflow). Proficiency with Docker, Kubernetes, and cloud platforms (AWS, GCP, or Azure). Strong Python programming and Linux system administration skills. Experience with model serving frameworks (TensorRT, ONNX Runtime, TorchServe). Familiarity with data versioning and experiment tracking tools (e.g., Weights & Biases, Neptune). Experience with monitoring and logging systems (Prometheus, Grafana, ELK stack). Strong organizational and communication skills; thrives in a fast‑paced startup environment. Eligible to work on export‑controlled projects and willing to relocate to Phoenix, AZ. Compensation and Benefits Salary: Competitive (commensurate with experience) Equity: Meaningful early‑stage ownership stake Work Setup: On‑site in Phoenix, AZ (relocation assistance available) Other Benefits: Direct ownership of core ML infrastructure powering real‑world autonomy Opportunity to work across defense, robotics, and swarm AI systems Mission‑driven, collaborative environment with leadership experienced in frontier robotics This role is ideal for engineers passionate about scaling ML infrastructure, deploying cutting‑edge models in the field, and building the backbone for autonomous swarm robotics in a fast‑moving defense technology company. Salary Range $160,000-$200,000 base. #J-18808-Ljbffr

Since 2009, Ardebili Engineering has been redefining what it means to be a collaborative design firm. Headquartered in Scottsdale, AZ, we don't just engineer buildings-we engineer relationships, culture, and success. Our projects span across sectors, but our people-first culture is what sets us apart. Here, you're not a cog in a machine-you're a voice in the room, a leader in the making, and a core part of a team that values excellence, integrity, and human connection. If you're tired of your work going unnoticed, this is where your contributions actually move the needle. About the Role - Be More Than a Designer This isn't your typical design role. At Ardebili, our Designers are: Project collaborators trusted from concept through QA/QC. Creative thinkers who bring solutions to the table. Mentors and learners, because when you grow, we all grow. You'll have the chance to own your designs, influence standards, and directly impact how communities thrive. Why You'll Love It Here Autonomy with Support - You'll own your work but never feel alone. Culture of Clarity - Open communication is the norm. Questions are encouraged. Design with Purpose - Your designs will shape buildings, communities, and client success. Growth-Minded Team - You'll be mentored, but also empowered to mentor others. Long-Term Vision - This is a career runway, not a short stop. We hire for potential, not just resumes. What You'll Be Doing Project Coordination & Communication Collaborate with internal teams to turn client vision into clean, compliant design. Proactively communicate project status, ask thoughtful questions, and flag risks early. Support project flow and timelines with strong coordination skills. Design & Code Compliance Execute electrical or mechanical designs using industry codes and company standards. Ensure every detail aligns with project scope and compliance requirements. Utilize software tools (AutoCAD, Revit, Microsoft Office, vendor platforms). Drafting & Standards Translate designs into clear 2D/3D drawings using established drafting protocols. Deliver designs that reflect accuracy, clarity, and intention. QA/QC & Excellence Perform detailed self-checks to ensure your work meets quality expectations. Mentorship & Collaboration Share knowledge and elevate others through training and feedback. Contribute to improving design processes and best practices. Who We're Looking For A proactive communicator with a passion for high-quality design. Someone who thrives in collaboration and takes ownership of their work. A detail-oriented thinker who balances structure with creativity. Experience with Revit/CAD required; background in mechanical or electrical design strongly preferred. 🔗 Ready to design a career where your voice matters? Apply now and grow with Ardebili Engineering.

As a Project Engineer at Graycor, you will enroll in our Engineering Mentoring Program designed to expose you with the critical hands-on experience necessary to build your successful career in construction. You will receive ongoing, specialized one-on-one training, coaching and mentoring on a variety of challenging and interesting project assignments, and a full rotation between departments. You will be actively involved in your career development, making self-assessments of your progress against established core competencies. Engineers will typically spend 24 months in the Engineer Mentoring Program before advancing to a new position with Graycor. AS A PROJECT ENGINEER, YOU WILL GAIN EXPERIENCE IN THE FOLLOWING AREAS: Project Management/ Project Controls: Assist Project Manager and Superintendent in the efficient control and management of the project, while ensuring safety and quality programs are being executed on the project site. Develop and maintain the critical path project schedule, including ongoing revisions. Assist the Project Manager and/or Superintendent in the preparation of short-term look-ahead schedules and the application of Lean Construction techniques. Maintain project documentation and expedite to the Owner, Architect, and Engineers for approval. Develop and maintain a thorough understanding of the provisions and requirements of all contract documents, including plans, specifications, owner's contract, subcontracts and purchase orders. Assist in the procurement of equipment and materials, and track and expedite their delivery. Track and evaluate subcontractor and vendor performance. Interact with subcontractors and vendors regarding technical and contractual matters. Estimating/ Preconstruction Services: Assist in the preparation of estimates and quotations to obtain project work. Assist the Project Manager and/or Estimator in bid preparation, subcontractor/vendor solicitation, evaluation and award. TO BE SUCCESSFUL IN THE GRAYCOR ENGINEERING MENTORING PROGRAM, YOU WILL NEED: Bachelor's degree in construction management, engineering, or other relevant technical discipline. 0-3 years of relevant construction internship or post-undergraduate experience. The ability to travel extensively and temporarily reside at the project site for extended periods of time, with travel home provided every other weekend. Travel subsistence pay and travel incentive bonuses may apply. Ambition to grow professionally and acquire new knowledge and skills. Our most successful Engineers are motivated to succeed and are passionate about construction across a variety of projects. Our typical project portfolio includes retail mall development, entertainment/ recreational, hospitality/lodging, office, logistics/distribution and cold storage, manufacturing, and green/ LEED building industries. The fortitude to juggle competing priorities in a fast-paced environment. Multi-tasking with a sense of urgency while maintaining strong attention to detail and accuracy is crucial. Effective communication skills, with the ability to interact professionally with managers, co-workers, subcontractors, and construction craft employees. Problem solving and critical thinking skills. Working knowledge of MS Office Suite. Additional basic knowledge of scheduling, estimating and takeoff software is a plus. We use Primavera P6, WinEst and On-Screen Takeoff.

Job Opportunity - Manufacturing Engineer - Electronics Manufacturing (Solar) - Phoenix, AZ I'm looking for a skilled Manufacturing Engineer with demonstrated experience - particularly from the solar industry - to help accelerate my client's manufacturing processes for new product introduction. This person will work closely with the Operations and Product Development teams to identify and lead cost reduction steps, quality improvement efforts, and help develop and test the functionality of electrical test equipment for manufacturing. Key Responsibilities: Identify and lead cost reduction steps and quality improvement efforts (ie labor, materials, etc) Test the functionality of electrical equipment based on system diagrams and test parameters Create conceptual designs for internal test equipment using block diagrams, circuit schematics, and test boards Travel as need be to solar tracker sites to perform troubleshooting, commissioning, retrofitting, and other technical support. Requirements: Bachelor's degree or equivalent in Electrical Engineering, Industrial Engineering, or similar (Electronics) At least 3 years' experience in manufacturing engineering, preferably with similar product type (solar/renewable hardware, electronics, motor controllers, etc) Knowledge of electronic product assembly processes and best practices. Experience optimizing manufacturing processes & DFM Experience with designing test fixtures & assemblies If this sounds like you & piques your interest, don't hesitate to apply here or reach out to me directly at ***************************** with your resume. ~Not accepting Visa sponsorships for this role - US Citizens & Green Card Holders only~ Job Opportunity - Manufacturing Engineer - Electronics Manufacturing (Solar) - Phoenix, AZ

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The construction Project Engineer will be based on the construction project site and will service our clients in a multi-state region and may even travel across the country. You will have the opportunity to build large, complicated, iconic design-build projects $30 million and above. In this role you will be part of a team responsible for taking projects from conceptual stages through closeout. The Specifics of the Role Build client and subcontractor relationships. Team with Architects, Engineers, and Planners to create and manage a design schedule. Assist in the establishment of project forecasts and budgets. Manage costs. Accept responsibility for project execution. Mentor and develop Interns and new incoming project management staff. Requirements Bachelor's Degree in Construction Management, Engineering, Architecture or related. 0 to 5 years of experience managing construction projects, ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience on a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects of at least 50 lbs. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

About the Company Prime Data Centers develops, acquires, and operates data centers for some of the world's largest enterprises. A private firm owned by a group controlling $6 billion in assets, with a 15-year tenure in technology and real estate development, Prime provides customers with ownership options and dynamic leasing models, defining a true corporate partnership. ************************ Onsite: Avondale, AZ About the Role The Project Engineer assists the product delivery team in performing focused tasks to support the construction lifecycle. The Project Engineer must be able to use Microsoft Office (Excel, Word, PowerPoint) and understand basic electrical and mechanical systems. They may be asked to focus on one or more of the following processes; generating a bill of material, preparing and reviewing submittals, soliciting quotes, performing basic quantity takeoffs, assembling PowerPoint presentations from multiple source documents, and printing, storing and retrieving design and engineering documents in the Document Management System. Responsibilities Collaborate with internal teams and external vendors to design, implement, and commission data center infrastructure projects. Translate technical requirements into project plans, schematics, and documentation. Ensure all work complies with design specifications, industry standards, and safety regulations. Support the deployment of power (UPS, generators, PDUs), cooling (CRAC/CRAH, HVAC), and structured cabling systems. Participate in capacity planning, risk analysis, and impact assessments for changes to the data center environment. Monitor installation progress, troubleshoot issues, and ensure quality control throughout the project lifecycle. Track project milestones, timelines, and budgets in coordination with project managers. Prepare and present technical reports, updates, and recommendations to stakeholders. Assist in vendor selection, procurement, and contractor supervision as needed. Maintain detailed records of system designs, configurations, and installations. Ensure compliance with industry regulations and internal standards. Qualifications Required: Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related technical field 3+ years of experience in data center engineering, construction, or operations Strong understanding of mission-critical infrastructure (power, cooling, cabling, network) Familiarity with data center design standards and best practices Proficiency in project tools such as AutoCAD, MS Project, or similar Excellent communication, documentation, and organizational skills Preferred: Certifications such as CDCP, DCDC, PMP, or equivalent Experience with hyperscale or colocation environments Working knowledge of commissioning processes and testing protocols Benefits: Competitive salary ($90-$105K) and performance bonus program 401k fully vested upon enrollment, up to a 4% employer match 100% employee premiums paid by employer for medical, dental, vision, life insurance, and disability Paid Time Off + Sick time Applications will be accepted on an ongoing basis. Prime is an Equal Opportunity Employer. All applicants are considered for employment without attention to race, color, age, religion, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender identity or expression, genetic information, ancestry, national origin, citizenship, protected veteran or military status, disability status, or any other classification protected by federal, state, or local laws and ordinances.

The Mechanical Designer will provide mechanical/HVAC design services on a variety of commercial building projects. ESSENTIAL DUTIES AND RESPONSIBILITIES Mechanical technical drafting and design on assigned projects Assist in the production of construction documents (drawings and specifications) for new buildings and for renovations and additions to existing facilities Perform quality control process relative to project responsibilities on assigned projects Perform initial site investigations and observations of work done by the installing contractor(s) related to contracted projects Provide coordination of project designs with other disciplines Maintain assigned project schedules Develop and maintain positive client relationships Additional duties as assigned COMPETENCIES Analytical thinking - analyzing and synthesizing complex situations and information to understand issues, identify options and support sound decision making Attention to detail - working in a conscientious, consistent and thorough manner Client focus - provides added value through service excellence to internal and external clients Continuous learning - identifying and addressing learning and developmental need to enhance own performance Job ownership - making decisions involving various levels of risk and ambiguity Results management - organizes time, work and resources to accomplish objectives in the most effect and efficient way Teamwork - working collaboratively with others to achieve organizational goals KNOWLEDGE, SKILLS AND ABILITIES Knowledgeable in: Ductwork layouts, wiring diagrams, equipment schedules Related building and mechanical codes Sustainable design practices Developing construction documents using Revit Skilled in: Excellent verbal and written communication Excellent time management Ability to: Work with customers and client base Work in a team-based environment Meet deadlines, successful completion of deliverables Communicate and work well with other departments Work under pressure Think analytically and thoroughly, while being resourceful and detail-oriented Focus on team and customer service Be continuously self-motivated, hardworking, flexible REQUIRED EDUCATION AND EXPERIENCE Completion of a high school diploma or general equivalency degree (GED) Proficient in the use of Autodesk Revit Two (2) years of related experience and/or training; or equivalent combination of education and experience in mechanical design Basic proficiency using Microsoft Office (Word, Excel, Outlook, PowerPoint) PREFERRED EDUCATION AND EXPERIENCE Bachelor's degree in Mechanical Engineering Four (4) years of experience in HVAC/plumbing design in the MEP field Advanced proficiency in the use of Revit

Define the future of aviation. Join Cirrus Aircraft's team to build the greatest transformation in aviation since the jet engine. certifiable flight technologies to bring simple and safe personal flight to the masses. The Advanced Development Group is a small and nimble team that researches, designs, and tests concepts using rapid, unconstrained set-based design methodologies. The scope of our projects ranges from feature development to end-to-end systems and proof of concept aircraft, spearheading the next products. Look no further, the future of aviation is here. Join our innovative company today. Duties and Responsibilities/Essential Functions * Conduct on-aircraft system integration and validation testing. * Performs fluid dynamics, aircraft performance, and stability and control. * Research, implement, and evaluate software algorithms. * Must be able to independently design and execute bench, ground, and flight tests, and analyze and present results. * Design, execute, and present trade studies pertaining to data, software, and network architecture. * Contribute towards overall architecture and strategy for the advanced flight systems. * Collaboration with electrical and mechanical engineering to achieve fully integrated systems will be required. * Experience with small multi-disciplinary teams is a plus. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Required Education and/or Experience: * Bachelors degree in Aerospace or Mechanical Engineering required. * 6-10 years' experience in a related field * Proficient in a professional environment developing MATLAB / Simulink control systems * Proficient in fluid dynamics, aircraft performance, and stability and control. * Proficient with engineering drawings, CAD software, and engineering configuration management. * Strong communication skills: Be able to concisely document and explain workflows and design choices. * Maintain clear documentation and collaborate with cross-functional teams to align data engineering tasks with broader project goals. * Comfortable in driving results under uncertainty during the earlier stages of development * Ability to work independently as well as part of a high functioning team Distinguishing Education and/or Experience: * Advanced degree in Aerospace or Electrical Engineering. * Experience generating system and simulation models. * Experience troubleshooting and implementing solutions for aerodynamic challenges such as drag, cooling, stability and control, and slow speed handling. * Experience with developmental flight testing. * Experience with physics-based 6DOF simulations. * Experience with configuration and layout of new aircraft. * Development/operations of hardware-in-the-loop simulators, conducting testing and troubleshooting of HW/SW interfaces * Exposure to Part 23 and/or Part 25 federal regulations. Competencies To perform the job successfully, an individual should demonstrate the following competencies: * Directs Work: Provides direction, delegates, and removes obstacles to get work done. * Situational Adaptability: Adapts approach and demeanor in real time to match shifting demands of different situations. * Manages Complexity: Makes sense of complex, high quantity, and sometimes, contradictory information to effectively solve problems. * Communicates Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Our Benefits: Cirrus provides a range of exciting benefits, including: * 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting. * Employer-Paid Coverages: Group term life, short- and long-term disability insurance. * Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options. * Free Health Tracking: With rewards for meeting health goals. * Generous PTO: 160 hours accrued within the first year. * Employee Referral Bonus: For referring talented candidates. * Career Development: Tuition reimbursement and professional growth opportunities. * Exclusive Discounts: Access to partner and marketplace discounts. * Community & Engagement: Company and employee clubs at various locations. These benefits are designed to support your well-being, growth, and enjoyment at Cirrus! Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

-Degree in Mechanical Engineering AND BEARING 10 ANALYSIS experience AND LUBRICATION SYSTEMS Responsible for design, development, implementation, analysis, procurement support of high precision spin bearings. Performs engineering bearing design evaluations. Requires a bachelor's degree in mechanical engineering and 1-3 years of experience in the field or in a related area. Requires knowledge of Bearing 10 Bearing analysis program and an understanding of lubrication systems.. Qualifications degree and US citizenship Additional Information Shifts: 1st shift Pay: $33-37$/hour

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represent a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Applications Design Engineer-Principal Job Description: * Provide technical support to key customers in base station/ broadcasting/ Microwave RF Power areas both OEM accounts and distribution channel. * Design and optimize high performance RF Power amplifier device/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Design and optimize high performance RF Power amplifier demo board/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Work with device design team to design or optimize evaluation circuit to initiate meaningful design-in opportunity in key customers or verify the feasibility on innovation concept. * Manage the account on technical interface. Build and maintain relationships with development crews at customer sites. * Help on product quality complaint description and quality report explanation from tech. point of view. * Technically drive marketing activities, including seminar/exhibition/conference, collect market feedback and give suggestions to Product Line on NPD. * Manage lab facilities like DPD system/Loadpull system etc. Qualifications: * Bachelor/master's degree in electronic engineering with the focus on RF. * 5+ years experiences in RF design or applications, experience in high power amplifier is preferred. * Expert in RF laboratory equipment and measurement techniques. * Expert on the design of high-power RF circuits for Power Amplifier applications. * Highly knowledgeable on modelling techniques for non-linear systems, familiar with simulation tool like ADS/Microwave office/Momentum. * Highly knowledgeable on the physics of device operation. * Good understanding of RF circuit techniques for performance enhancements such as digital pre-distortion and Doherty. * Excellent problem-solving skills. * Have a proactive, implementation-focused approach. * Excellent verbal, written and presentation skills. Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. This position is eligible to receive restricted stock unit (RSU) awards and cash bonuses, solely at MACOM's discretion, subject to individual and company performance. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs. Benefits: This position offers a comprehensive benefits package including but not limited to: * Health, dental, and vision insurance. * Employer-sponsored 401(k) plan. * Paid time off. * Professional development opportunities.

This is a remote position; however, preference will be given to candidates located in Austin, TX, Phoenix, AZ, Atlanta, GA, Reno, NV, Grand Rapids, MI, or Las Vegas, NV. This position may require periodic travel to the locations listed above for site visits, project meetings, and team collaboration. Company Description Meade Engineering (MEI) is a full-service design firm specializing in innovative and cost-effective engineering solutions for data centers, cloud providers, and other large-scale construction projects. Our team of expert engineers, designers, and consultants is dedicated to delivering high-quality, reliable, and sustainable solutions that drive the industry forward. At MEI, we foster a collaborative and dynamic work environment where technical excellence, innovation, and professional growth are core values. If you're looking to lead cutting-edge design initiatives and help shape the future of mission-critical infrastructure, we want to hear from you Position Summary: The Principal Mechanical Engineer will serve as a technical leader and Engineer of Record (EOR) for mechanical systems on complex data center projects. This individual will be responsible for leading design efforts, overseeing project delivery, and mentoring junior engineers. The role requires deep technical knowledge of mission-critical HVAC, cooling, and mechanical infrastructure systems, as well as a proven ability to lead multidisciplinary teams through design, coordination, and construction phases. Key Responsibilities Serve as Engineer of Record (EOR) for mechanical design on data center projects. Lead the design and engineering of HVAC, chilled water, and other mission-critical cooling systems. Develop, review, and approve technical drawings, specifications, and submittals. Coordinate with internal design teams and external stakeholders including clients, architects, and contractors. Oversee mechanical design from concept through construction, ensuring quality, accuracy, and compliance with codes and standards. Conduct system analyses, equipment selections, and energy efficiency evaluations. Provide technical guidance and mentorship to junior and mid-level engineers. Manage project budgets, schedules, and deliverables to ensure on-time, high-quality outcomes. Review and seal design documents as required under state licensure. Support business development efforts through proposal writing, client presentations, and technical input. Qualifications Bachelor's degree in Mechanical Engineering (Master's preferred). Professional Engineer (PE) license required and in good standing. 7+ years of experience in mechanical engineering design, with at least 5 years focused on data centers or mission-critical facilities. Demonstrated experience acting as Engineer of Record (EOR) for mechanical systems. Strong leadership skills with proven experience managing and mentoring engineering teams. In-depth knowledge of ASHRAE standards, building codes, and energy modeling principles. Proficiency in Revit, AutoCAD, and mechanical design software (e.g., Carrier HAP, Trace 700). Excellent communication and client-facing skills. Experience with hyperscale or colocation data center projects. Knowledge of sustainability and energy efficiency practices. Familiarity with commissioning processes and field inspections.

Discover your exciting role The Senior Lead Mechanical Engineer participates in a team environment consisting of engineers and designers to produce construction documents for the following systems: HVAC wet/dry, plumbing, controls and the like. Explore your tasks and responsibilities * Performs engineering tasks for the design of utilities and HVAC (wet/dry) systems for high technology facilities including cleanrooms, general manufacturing/process facilities and institutional facilities * Prepares mechanical engineering calculations in support of HVAC systems design including heat load calculations, duct sizing, chilled water hydraulics, static pressure calculations, equipment sizing and selection * Plans and schedules discipline deliverables and activities including man-hour estimation, assigning personnel, and supervision of discipline personnel on the Projects * Develops manpower and labor cost requirements for a project and monitor them to aid in evaluating project schedule and budget * Provides specialized technical input to studies and design for staff's specific area of expertise * Develops study and design procedures to facilitate high-quality cost-effective work by discipline team * Responsible for the development of conceptual, preliminary, and final design documentation, including system sizing and selection calculations, Process and Instrumentation Diagrams (P&IDs), general arrangement drawings, and sequences of operation for associated systems * Works closely in coordination with the project team and other disciplines as well as other design offices * Coordinates with disciplines in the preparation and development of the deliverables and ensuring those other disciplines' inputs are incorporated * Works to build and maintain positive and productive working relationships both internal and external * Provides input to the development of engineering budget and schedule to meet requirements * Other duties as assigned Show your expertise Minimum Required * Bachelor's degree in Mechanical Engineering required * Professional Engineer (PE) License required * 10+ years of experience * Autodesk Building Systems Software Preferred * Nation Council of Examiners for Engineering and Surveying (NCEES) Record Skills & Knowledge * Good time management skills, strong work ethic and attention to details * Individual must possess strong communication and organizational skills * Strong team player with an ability to build effective working relationships with individuals, department leads, and client representatives * Energetic and self-motivated * Works to build and maintain positive and productive working relationships both internal and external * Thorough knowledge of codes and common industry standards related to the design of industrial and manufacturing facilities and systems * Working knowledge of Microsoft products * Ability to mentor and train junior staff Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Non-Solicitation: We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte may be contacted by Exyte without obligation to the third-party agency. Exyte US, Inc. is proud to be an Affirmative Action and Equal Employment Opportunity employer that is committed to celebrating diversity and supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity or expression), national origin, disability status, genetic information, protected veteran status, or any other protected characteristic as outlined by federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Phillip Turner via E-Mail at ************************ Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

The Principal Mechanical Engineer will develop next generation solar tracker products with emphasis on innovation. This position includes working with all levels of management, engineering, and other departments to create and select next generation technologies and products. This position is full-time and exempt. Location of this position is in Chandler, AZ. Key Job Responsibilities: Thought leader on mechanical engineering product improvements, technology vision, and roadmaps. Ensure that product evolution and innovation meet customer needs and remains ahead of market trends and competition. New product development owning parts and assemblies from concept through production implementation. Vetting product concepts for customer needs, ease of installation, business cases, manufacturability, reliability, and safety. Lead design review process and approve critical design decisions. Obtain components/supplies/equipment to support prototype assembly and conduct preliminary OEM vendor assessment/selection. Analyze different materials, techniques, manufacturing processes, design tolerances, and other factors in the developmental process. Manage fabrication and testing of new designs. Select the best product innovation and concept designs to bring into the product line. Provide technical leadership for key engineering projects. Provide regular updates to management. Work cross-functionally with other engineering teams and company departments to achieve company goals. Create and maintain necessary documentation for program success. Perform competitive analyses. Work with customer facing departments to ensure that customer feedback and experience is accounted for in product improvements. Mentor junior engineers. Qualifications: 10+ Years design experience designing electromechanical equipment with structural components, gearing, and/or drivetrains. Design skills such as FMEA, DFA, DFM, design for cost. Design experience using SolidWorks. FEA experience using SolidWorks Simulation or ANSYS. Direct experience in solar industry. Must be able to thoroughly and accurately document design intent, analysis results, test results, etc., in written form. Must have good organizational and time-management skills with the ability to work on multiple projects concurrently. Ability to effectively prioritize and execute tasks in a high-pressure environment. Must communicate effectively with engineers, drafters, and others within the company. Experience working in a matrixed environment, interfacing with high-level internal and external leadership. Experience defining and setting up tests to validate designs. Preferred qualifications: Master's degree in Mechanical Engineering. Professional Engineering Certification. Experience with structural components applied with civil engineering experience and wind loading. Experience with Stage Gate Product Development Processes At Array Tech, Inc., we strive to lead with our culture, and believe that our people are a key enabler of our future state. Our total rewards philosophy supports Array's ability to attract, develop, and retain our employees. We offer competitive compensation, benefits and wellness programs that align with the local markets where we do business. Array Tech, Inc. offers equal employment opportunity without regard to race, color, gender, age, creed, sex, religion, national origin, disability (physical or mental), marital status, citizenship, ancestry, sexual orientation, gender identity, and gender expression, or any other legally protected status. At Array Tech, Inc., we strive to lead with our culture, and believe that our people are a key enabler of our future state. Our total rewards philosophy supports Array's ability to attract, develop, and retain our employees. We offer competitive compensation, benefits and wellness programs that align with the local markets where we do business. Array Tech, Inc. offers equal employment opportunity without regard to race, color, gender, age, creed, sex, religion, national origin, disability (physical or mental), marital status, citizenship, ancestry, sexual orientation, gender identity, and gender expression, or any other legally protected status.

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $5.8 billion in revenue for 2023, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The construction Project Engineer will be based on the construction project site and will service our clients in a multi-state region and may even travel across the country. You will have the opportunity to build large, complicated, iconic design-build projects $30 million and above. In this role you will be part of a team responsible for taking projects from conceptual stages through closeout. The Specifics of the Role Build client and subcontractor relationships. Team with Architects, Engineers, and Planners to create and manage a design schedule. Assist in the establishment of project forecasts and budgets. Manage costs. Accept responsibility for project execution. Mentor and develop Interns and new incoming project management staff. Requirements Bachelor's Degree in Construction Management, Engineering, Architecture or related. 0 to 5 years of experience managing construction projects, ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience on a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects of at least 50 lbs. Some Things You Should Know This position will service our clients in Phoenix, AZ. Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2024 Best Places to Work - Crain's Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2024 ENR Midwest - Midwest Contractor (#1). 2024 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2024 ENR Top 100 Green Contractors - Green Contractor (Top 5). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Define the future of aviation. Join Cirrus Aircraft's team to build the greatest transformation in aviation since the jet engine. certifiable flight technologies to bring simple and safe personal flight to the masses. The Advanced Development Group is a small and nimble team that researches, designs, and tests concepts using rapid, unconstrained set-based design methodologies. The scope of our projects ranges from feature development to end-to-end systems and proof of concept aircraft, spearheading the next products. Look no further, the future of aviation is here. Join our innovative company today. Duties and Responsibilities/Essential Functions Conduct on-aircraft system integration and validation testing. Performs fluid dynamics, aircraft performance, and stability and control. Research, implement, and evaluate software algorithms. Must be able to independently design and execute bench, ground, and flight tests, and analyze and present results. Design, execute, and present trade studies pertaining to data, software, and network architecture. Contribute towards overall architecture and strategy for the advanced flight systems. Collaboration with electrical and mechanical engineering to achieve fully integrated systems will be required. Experience with small multi-disciplinary teams is a plus. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Required Education and/or Experience: Bachelors degree in Aerospace or Mechanical Engineering required. 6-10 years' experience in a related field Proficient in a professional environment developing MATLAB / Simulink control systems Proficient in fluid dynamics, aircraft performance, and stability and control. Proficient with engineering drawings, CAD software, and engineering configuration management. Strong communication skills: Be able to concisely document and explain workflows and design choices. Maintain clear documentation and collaborate with cross-functional teams to align data engineering tasks with broader project goals. Comfortable in driving results under uncertainty during the earlier stages of development Ability to work independently as well as part of a high functioning team Distinguishing Education and/or Experience: Advanced degree in Aerospace or Electrical Engineering. Experience generating system and simulation models. Experience troubleshooting and implementing solutions for aerodynamic challenges such as drag, cooling, stability and control, and slow speed handling. Experience with developmental flight testing. Experience with physics-based 6DOF simulations. Experience with configuration and layout of new aircraft. Development/operations of hardware-in-the-loop simulators, conducting testing and troubleshooting of HW/SW interfaces Exposure to Part 23 and/or Part 25 federal regulations. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Directs Work: Provides direction, delegates, and removes obstacles to get work done. Situational Adaptability: Adapts approach and demeanor in real time to match shifting demands of different situations. Manages Complexity: Makes sense of complex, high quantity, and sometimes, contradictory information to effectively solve problems. Communicates Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Our Benefits: Cirrus provides a range of exciting benefits, including: 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting. Employer-Paid Coverages: Group term life, short- and long-term disability insurance. Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options. Free Health Tracking: With rewards for meeting health goals. Generous PTO: 160 hours accrued within the first year. Employee Referral Bonus: For referring talented candidates. Career Development: Tuition reimbursement and professional growth opportunities. Exclusive Discounts: Access to partner and marketplace discounts. Community & Engagement: Company and employee clubs at various locations. These benefits are designed to support your well-being, growth, and enjoyment at Cirrus! Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

The future of solar is happening here and now, and it's your opportunity to shine! We're looking to you to play a critical role in the development and support of leading-edge, industry-defining solar trackers. You will conduct research and develop components and systems to support our next-generation suite of products, and your designs will be utilized to mount and track millions of solar panels in the US and internationally. On our diverse, flexible, and cross-functional team, you will have the opportunity to collaborate with multiple levels of management, engineering, and other departments to move your ideas through our product development process and into production. Key Job Responsibilities: Provide mentorship and training to peers and junior-level engineers on design best practices, progressive die stamping fundamentals, product development process, supplier interface, solar field logistics, design optimization, and other topics as assigned Set the standard for the knowledge base of design for progressive die stamping, and are accountable for complete engineering programs Create design concepts using computer-aided design and analyze using finite element methods, forming simulation software, etc. Oversee and define test plans for design validation testing Interface with customers to understand needs and align with industry trends Collaborate with service personnel to measure and improve upon assembly practices Engage with suppliers to understand manufacturing capabilities and adjust designs accordingly Develop standardized procedures for evaluation and approval of third-party tooling designs Analyze components and systems for cost optimization and create should-cost models Use fundamental principles of engineering to analyze system trends using spreadsheets and other tools Perform competitive analysis, learn industry trends, and suggest design changes to suit Participate in trials of solar system component installations (periodic travel when necessary) Qualifications: Bachelor's degree with minimum 10 years' industry experience in mechanical engineering (or Masters' +8 years or PhD +4 years) 10+ years' experience in mechanical component design 10+ years' experience using commercial CAD modeling software 5+ years' experience using commercial structural finite element analysis software 3+ years' experience using stamping simulation software (Forming Suite, AutoForm, DynaForm, etc.) Sound understanding of fundamental engineering principles of statics, dynamics, and energy Demonstrated self-direction on projects and engineering tasks Ability to drive and manage change with designs, programs, and processes Experience communicating complex technical concepts to both technical and non-technical audiences Preferred qualifications: Master's degree or PhD and any relevant professional certifications Demonstrated creativity in problem solving situations Previous experience with solar tracker engineering At Array Tech, Inc., we strive to lead with our culture, and believe that our people are a key enabler of our future state. Our total rewards philosophy supports Array's ability to attract, develop, and retain our employees. We offer competitive compensation, benefits and wellness programs that align with the local markets where we do business. Array Tech, Inc. offers equal employment opportunity without regard to race, color, gender, age, creed, sex, religion, national origin, disability (physical or mental), marital status, citizenship, ancestry, sexual orientation, gender identity, and gender expression, or any other legally protected status.