Mechanical design engineer jobs in Raleigh, NC

Maxonic maintains a close and long-term relationship with our direct client. In support of their needs, we are looking for a Principal Mechanical Engineer. Job Title: Principal Mechanical Engineer Duration: 3+ months - Part time Rate: $65/hr, Based on experience Flexible schedule - 3 days in office, averaging 20 hrs/week Job Summary: Principal mechanical engineers develop new products, redesign existing products, and perform research and testing on product concepts related to medical devices. This individual will be an important member of the Advanced Development team focused on research, development, and bringing to market medical devices to support business objectives. The successful candidate will be involved with projects covering all aspects of advanced development including concept, design, verification testing and transfer to manufacturing. Must have worked in a medical device company and familiar with regulatory and quality requirements throughout all stages of the product development life cycle. Responsibilities 1. Technical LeadTechnical leadership of system features and functions as applicable to a medical device. Expectation is this leadership requires collaboration and leading of other engineering groups. 2. Mechanical Engineering Take leadership of projects in development, managing all team members assigned to projects to keep them moving forward on schedule. Provide engineering analysis, feasibility reports and studies to assist advanced development projects. Provide broad mechanical engineering technical expertise through various phases of product life cycle. 3. Innovation Develop, design, and test innovative concepts and solutions which align with the needs of the clinic, patient and business. Collaborating with the engineering and marketing department on product feasibility. Provide mechanical engineering subject matter expertise in designing and building test setups and fixtures for various Advanced Development projects. 4. Documentation Maintain accurate documentation throughout the design process per GDP and GMP. Write product requirements and specifications to support feature. Plan, design, execute and report on system experiments as related to feature development and the product roadmap. 5. Test Methods Prove product design by developing test plans, adjusting design, running performance calculations, maintaining quality standards and approve prototypes. Validation of the test tool or setup is usually required. 6. Prototype manufacturing Lead engineering prototype builds, including generating BOMs, ordering parts and materials, and training lab technicians. Work closely with pilot manufacturing line and operations group to develop a device build process. 7. Good laboratory practice proficiency. Complete knowledge in operating critical lab equipment such as oscilloscope, microscope, acoustic tank, force balance, translation stage, impedance analyzer, pulse-echo fixture, cryostats, and training others. Experience testing PCBA and soldering parts. Technical & Functional Skill Thorough understanding of test method validation, GR&R, GD&T, and statistical analysis Solidworks or other CAD experience Understanding and application of ISO Quality System requirements and FDA regulations for medical device manufacturing Familiar with a variety of manufacturing processes including mechanical and electromechanical Minimum Qualifications Bachelor's Degree in ME, IE or EE or other relevant Engineering discipline 10+ years of related design and manufacturing experience in the medical device and/or component development industry Design Control experience including design and process verification and validation. Experience in manufacturing and assembly process development and validation (IQ, OQ, PQ) Injection molding, die casting, metal stamping and/or machining knowledge, including fixtures gauges and tooling experience Preferred Qualifications Practical knowledge of Six Sigma methodologies or SPC. Green or Black Belt certification Familiar with project management methods and tools. Travel Requirements Up to 20% Physical RequirementsThis position requires you to sit, stand and perform general office functions. You may also be required to lift up to twenty-five pounds occasionally. Bending, stooping and reaching are also frequently required Essential SkillsLead Self Time Management Digital Acumen Problem Solving Emotional Intelligence Resiliency Communication Lead Others Leadership Collaboration Project Management Motivate & Influence About Maxonic: Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients. Interested in Applying? Please apply with your most current resume. Feel free to contact Harkirat Singh (******************** / *************** for more details.

Notes: Fully Onsite Open for candidates with experience with project engineering and coordination experience Top 3 Must Have Skill Sets: 1. Ability to work well under pressure 2. Facilities knowledge and experience 3. Great communication skills 4. Proactive 5. Willingness to learn new experiences Job Details: Position involves support of senior staff in the initiation, design, and delivery of projects, particularly for facilities related scope. Employ basic engineering skills and practices to gather user requirements and translate them into technical documentation for execution by third party firms. Assist with project definition by performing engineering studies and assessment for facilities system, perform quality and overall facilities walkdowns. Perform field evaluations of existing systems and provide engineering design recommendations. Skills: self-started, ability to communicate effectively, manage tasks to completion. Experience with facilities management and projects is a must. Basic Qualifications Master degree OR Bachelor degree and 2 years of experience OR Associate degree and 6 years of experience OR High school diploma / GED and 8 years of experience

Pay: $80,000.00 - $135,000.00 per year Note: This position requires employees to be on-site five days a week at either the Raleigh, NC or Charlotte, NC office. Note: The qualified candidate for this position must have at least 5 years of transportation hydraulic design experience, preferably with NCDOT projects. About Our Client Our client is a privately held, employee-owned, and woman-owned engineering firm with over three decades of success. Headquartered in Raleigh, NC, they are recognized among the top firms in the Southeast and are a certified DBE and HUB business. With offices in Raleigh and Charlotte, they provide engineering services in transportation, roadway design, hydraulics, and more, delivering innovative solutions with a hands-on approach. Job Description Lead and support hydrology and hydraulic analysis for roadway and transportation projects Design stormwater management systems, ponds, and conveyance systems Perform erosion control and outfall analysis to ensure compliance with environmental standards Contribute to all aspects of roadway drainage design including culverts, bridges, ditches, BMPs, and watershed studies Conduct site visits and fieldwork to confirm existing conditions Develop hydrologic and hydraulic improvements for roadway and drainage projects Collaborate with multidisciplinary teams, sub-consultants, and permitting agencies Extract and analyze data from MicroStation, GEOPAK Drainage, HEC-RAS, and related tools Provide technical guidance and mentorship to junior staff Manage project scopes, schedules, and budgets when assigned Qualifications Bachelors or Masters degree in Civil Engineering or related discipline Professional Engineer (PE) license preferred Minimum of 5 years of hydraulic design experience, ideally with NCDOT projects Proficiency with MicroStation, GEOPAK Drainage, and HEC-RAS Working knowledge of NCDOT Guidelines for Drainage Studies and Hydraulic Design and FHWA Hydraulic Design Manual Soil erosion and sediment control design experience Familiarity with OpenRoads Designer and SUDA is a plus Strong written and verbal communication skills with the ability to work collaboratively in a team environment Must be authorized to work in the U.S. (sponsorship not available) Why This Is a Great Opportunity Join a top-ranked engineering firm with over 30 years of growth and recognition Relocation assistance available for qualified candidates Opportunity to work on diverse transportation and drainage projects with state-wide impact Professional growth potential, including project management opportunities and leadership development Comprehensive benefits package including health, vision, dental, life insurance, PTO, retirement plan, and paid holidays. JPC-384 Job Type: Full-time Benefits: Dental insurance Health insurance Life insurance Paid time off Relocation assistance Retirement plan Vision insurance

We are seeking a motivated and detail-oriented Project Engineer to join our dynamic team. The ideal candidate will play a pivotal role in overseeing various construction projects from inception to completion, ensuring that all aspects are executed efficiently and effectively. This position requires strong project management skills, proficiency in construction management software, and a solid understanding of engineering principles. Your responsibilities in this role: Maintain contract documents, posting and distribution of addenda, field orders, RFI's and Requests for Proposal Control shop drawings and submittals to review for contract compliance and establish a routing process to ensure that all involved in the work are kept informed Lead the project QC including all deviation reports, pre-pour inspections, completion lists, testing reports, etc. and actively update the Project Manager and Superintendent Coordinate Requests for Information to and from architectural engineer, owner and other contractors and subcontractors Assist in assembling proposals and prepare owner change order requests Maintain “As-Built” drawings; prepare final close out sets Secure operations manuals guarantee and warranties; assist in project close-out What you need to qualify: 1-3 years of relative job experience in commercial construction highly preferred BS degree in Construction Management or Engineering Thorough understanding of industry practices and standards Strong foundation in database management (ex. Excel) and related industry software (ex. Bluebeam) Highly collaborative work style with excellent communication skills Join us as we build innovative solutions in the construction industry! LRT is proud to be an Equal Opportunity Employer and member of the Drug Free Safety Program.

Responsible for providing technical and engineering expertise to maximize site equipment availability, reliability and reduce maintenance costs through system and process continuous improvement, i.e., LEAN principles and Continuous Improvement methodology. Develop and implement strategies and methods that improve preventive maintenance processes and procedures resulting in enhanced equipment performance. Technically support all aspects of maintenance operations while ensuring compliance with SOPs, cGMPs, safety procedures, quality standards, OSHA standards, other regulatory agency standards, good maintenance practices, and corporate initiatives. A summary of responsibilities is as follows: Engineering SME responsible for regulated utility (Clean Steam, WFI and Compressed Gas) generation and distribution. Work closely with manufacturing personnel/other departments to resolve manufacturing issues and implement process improvements. Act as a liaison between maintenance and manufacturing personnel for corrective work and utilities support. Support implementation of process equipment upgrades and optimization. Capital projects for new bioprocess equipment purchase, installation and facility integration. Trouble shooting issues with utility support of process equipment. Coordination with other plant engineers, validation and automation colleagues in support of manufacturing operations. Perform equipment evaluations to determine and justify new equipment, equipment replacement and incorporate into capital plan. Equipment replacement should be identified as part of a site or facility Master Plan. Review equipment for condition, performance, and maintenance history; assessing the liability caused by marginal equipment performance; assessing the cost and value of overhauling or upgrading to the cost of replacement; and creating justifications for capital replacements. Equipment evaluations should include risk assessments to determine if adequate redundancy exists to support operations in the event of catastrophic equipment failure. Recommends and presents capital equipment purchases to facilitate campus growth and to maximize equipment reliability. Provide subject matter expertise for PM task-list development and revisions. Assists RCM analysis team to determine PM and part strategies. Based on expertise, history, and RCM analysis results. Qualifications A minimum of a BS degree + 15 years of relevant experience Direct knowledge and extensive experience in project management and regulated utilities (RO, WFI, clean steam, compressed gases, etc.) within a biopharmaceutical or pharmaceutical cGMP environment is required. Professional Engineer or Certified Project Management certification preferred. Experience with FDA and EU licensing and inspection is beneficial. Familiarity with manufacturing and/or utilities equipment and operations is desired. Experience in both Global Engineering and site level engineering is strongly preferred

About Analog Devices Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible. Learn more at ************** and on LinkedIn and Twitter (X). LTspice Modeling Engineer - Senior Level Position Analog Devices, Durham, NC, Wilmington, MA Analog Devices, Inc: Analog Devices (NASDAQ: ADI) is a world leader in the design, manufacture, and marketing of a broad portfolio of high-performance analog, mixed-signal, and digital signal processing (DSP) integrated circuits (ICs) used in virtually all types of electronic equipment, dedicated to solving the toughest engineering challenges. We enable our customers to interpret the world around us by intelligently bridging the physical and digital with unmatched technologies that sense, measure, power, connect, and interpret. Position Overview: As ADI expands into new product and market segments, the Multi-Market Power Group (MMP) is looking for a Senior LTspice Modeling Engineer who will be responsible for: * Creating LTspice simulation models. * Maintaining and debugging existing models, working closely with the Modeling Team. * Special projects involving technology improvements to our tools and techniques to maintain our competitive advantage. * Interfacing with IC Designers, Application Engineers, Marketing and Sales, and Management. * Maintain good and professional communications dialog with both internal and external customers. In this position, you will: * Develop behavioral circuits to model switching converters, and other ADI products as well. * Use existing model base to learn modeling techniques and grow in skill and knowledge. * Help mentor the junior engineers in our team. * Take the lead in developing technology platforms to accelerate model development and verification. * Exercise mathematical intuition and analysis to select best approaches. * Support field and/or customer questions on existing models. * Occasional technical writing, presentations, brainstorming sessions, and trainings. What you need to be successful in this role: * BSEE or MSEE with 10+ year experience and either deep experienced in switching power converters or analog IC design. With a passion to do modeling. * Strong background in analog and digital circuits, with circuit analysis techniques. * Strong analytic skills along with power electronics and control theory. * IC applications experience a plus, modern laboratory equipment use a plus. * Some level and knowledge of programming useful, MatLab/Simulink, Python, and C/C++. * Good technical writing and presentation skills. * Must possess good communication skills and have ability to work as a part of a multidisciplinary team. * Ability to work independently and it is important to be a self-starter. For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law. Job Req Type: Experienced Required Travel: Yes, 10% of the time Shift Type: 1st Shift/Days

Job DescriptionSalary: ****Must be in commuting distance to Garner, North Carolina.**** About Us We are an established, employee-owned (ESOP) manufacturing company specializing in poultry chiller systems and related process equipment used in high-volume food processing environments. Our work is highly collaborative across engineering, fabrication, field service, and project management. We value practical problem-solving, accountability, and supporting each other in delivering reliable systems to our customers. Position Summary The Mechanical Designer will work as a key contributor on our Engineering team to develop and maintain manufacturing drawings, equipment layouts, assemblies, and installation details for our poultry chiller systems and associated equipment. This role is both office and field oriented. The candidate will spend most of their time developing 3D mechanical models and drawings, while also participating in site visits for field measurements, equipment documentation, and occasional 3D LiDAR scanning. This is a strong role for someone who enjoys hands-on, real-world engineering and the technical details required to build and install equipment that works right the first time. Key Responsibilities Create and maintain 3D models and 2D fabrication drawings using Autodesk Inventor (Similar experience, e.g. SolidWorks, is acceptable with willingness to transition). Develop complete mechanical drawing packages including assemblies, detailed part prints, weldment drawings, and bill of materials (BOMs). Work directly with shop personnel (welders, fabricators, machinists) to verify manufacturability, ease of fabrication, and clarity of documentation. Conduct field investigations at poultry processing facilities to gather dimensions, document existing equipment, and assess installation constraints. Assist with or perform 3D LiDAR scanning of existing equipment and environments (experience preferred, but training available). Support installation teams with drawing clarifications and technical detail during project execution. Participate in internal reviews to ensure accuracy, quality, and adherence to company standards. Maintain structured drawing and document control practices. Required Qualifications Bachelors degree in Mechanical Engineering or related field, OR proven equivalent technical experience in mechanical design. 37 years of mechanical design experience in a manufacturing or industrial environment. Proficiency in 3D parametric CAD software (Inventor, SolidWorks, or similar). Strong understanding of fabrication processes including welding, machining, and sheet metal manufacturing. Ability to read and apply weld symbols, tolerancing standards, and mechanical detail drawings. Ability to implement a systematic, data-driven approach to investigate and resolve significant or recurring problems within an organization's processes, products or systems. Comfortable working in food processing plants, mechanical rooms, and shop floors. Comfortable engaging and communicating with customers in similar industries. Willingness to travel 12 times per month for short domestic trips (typically 13 days). Preferred Qualifications Experience using FARO or similar 3D LiDAR scanners and processing point clouds. Familiarity with Autodesk Vault or other PDM systems. Understanding of stainless steel fabrication and sanitary equipment design. Experience with equipment layout in constrained or retrofit environments. Experience with root cause techniques and analysis. Work Environment Approximately 75% office / 25% field (which may include plant environments with elevated temperatures, humidity, and wet conditions). Requires ability to climb, crawl, or maneuver around installed equipment for dimension gathering. Standard PPE provided and required during field visits. Benefits: Health/Dental/Vision Insurance Vacation Time Sick Time Life Insurance Long Term Disability ESOP (Employee Stock Ownership Plan) Must be authorized to work in the U.S. We look forward to welcoming a new member to our team!

Job Title: Mechanical DesignerJob Description We are seeking a Mechanical Designer to maintain effective mechanical design bases for transformer layouts and provide technical expertise to customers. The role involves reviewing projects, comparing customer specifications with other design data, and noting inconsistencies or special requirements. You will utilize operating programs to complete transformer mechanical designs, including internal and external layout of components and accessories. Responsibilities * Maintain effective mechanical design bases for transformer layouts. * Provide technical expertise to customers. * Review assigned projects, comparing customer specifications to other design data and noting inconsistencies or special requirements. * Utilize operating programs to function effectively. * Complete transformer mechanical design including internal and external layout of components and accessories based on documentation, standard practices, and/or technical advisors. * Calculate dimensions, allowances, and specifications per standard procedures or general design knowledge when standard procedures do not exist. * Provide technical support and training. * Assist supervisor in planning and scheduling design and detailing processes. * Direct or execute corrective action when shop problems are encountered. * Consult with shop and QA personnel on interferences or interpretation of engineering information. * Assist on development projects, including completion of standard processes or practices and computer programs. * Recommend and develop new procedures to improve the efficiency of the design and/or detailing process. * Support Quote Designers with bid or preliminary outlines and mechanical optimization. Essential Skills * Proven experience in mechanical design. * Ability to calculate dimensions, allowances, and specifications. * Proficiency in utilizing operating programs for design purposes. Additional Skills & Qualifications * Experience with SAP systems. Work Environment The role offers the opportunity to work on transformer design and provide technical expertise to customers. It involves involvement in development projects and process improvement, as well as supporting Quote Designers in bid and preliminary outline development. Job Type & Location This is a Permanent position based out of Goldsboro, NC. Pay and Benefits The pay range for this position is $85000.00 - $90000.00/yr. Reference Prolec Summary of Benefits. Workplace Type This is a fully onsite position in Goldsboro,NC. Application Deadline This position is anticipated to close on Dec 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Mechanical Designer At Salas O'Brien we tell our clients that we're engineered for impact. This passion for making a difference applies just as much to our team as it does to our projects. That's why we're committed to living our values every day: inspiring, achieving, and connecting as shared owners of our success with a focus on a sustainable future. Building for the long-term means that all of our team members can expect to work on amazing projects with a people-first approach to problem solving. It also means that each member of our team has truly limitless potential to build a unique, meaningful, and high-impact career-and they'll receive great total rewards along the way. About Us: Founded in 1975, Salas O'Brien is an employee-owned engineering and professional services firm focused on achieving impact for our clients, our team, and the world. We know that tomorrow's requirements are today's opportunities, and we are here to design lasting solutions for pressing challenges. We work across a variety of industries providing integrated engineering and consulting services. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day. Job Summary: The ideal candidate will assist in the design, analysis, and testing of mechanical components and systems, contributing to the development of innovative products and solutions. This role provides an excellent opportunity for professional growth and hands-on experience in a dynamic environment. Responsibilities: Design and Development: Assist in the design and development of mechanical components, systems, and products using Revit software Participate in brainstorming sessions and contribute to innovative engineering solutions. Collaborate with cross-functional teams to ensure design requirements are met. Analysis and Testing: Conduct basic engineering calculations and analysis (e.g., heat loads, air flows) to ensure the integrity and performance of designs. Support the troubleshooting and optimization of mechanical systems. Documentation and Reporting: Prepare and maintain detailed engineering documentation, including design specifications, plans, and reports. Assist in the preparation of technical presentations and project status updates. Project Support: Collaborate with senior engineers and project managers to ensure timely completion of project milestones. Provide support in the selection and evaluation of materials, components, and equipment processes. Assist in quality control and assurance processes during production. Qualifications and Experience: Educational Background: Bachelor's degree in Mechanical Engineering Experience: 2+ years working in the consulting engineering industry Technical Skills: Proficiency in Revit software. Basic understanding of mechanical engineering principles, including mechanics, thermodynamics, and materials science. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Willingness to learn and adapt in a fast-paced environment. Familiarity with industry standards and codes (e.g., ASHRAE, IMC) preferred Basic knowledge of HVAC Design preferred Adaptability: Flexibility and willingness to work on various projects and tasks, embracing new challenges with enthusiasm. Initiative: Demonstrated ability to work independently and take initiative to drive projects forward. Location: Raleigh, NC Travel: Occasional to project sites Benefits: This role is also eligible for performance-based bonuses and a comprehensive U.S. based benefits package, including: Medical, dental, and vision insurance 401(k) with company match Paid time off and company holidays Wellness programs and employee assistance resources Professional development support For more information, visit our full benefits overview here. Equal Opportunity Employment Statement Salas O'Brien provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state/provincial, or local laws. Salas O'Brien will accommodate the disability-related needs of applicants as required by law.

CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,400 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description The Mechanical Designer I performs their job functions under the supervision of a project's Engineer-of-Record. The Mechanical Designer II works on matters of basic to intermediate complexity under the responsible charge of the registered Mechanical Engineer. This role is expected to work closely with other architects, engineers, and designers, as well as other internal and external team members to ensure a coordinated, constructible, and complete design. Tasks include assisting with 3D modeling and design, conducting field investigations, performing red-to-black markup/review tasks, and producing discipline deliverables. Responsibilities * Interface with client and external partners preferred * Travel as required for client development and project execution preferred * Work on a variety of mechanical assignments supporting all phases of design including initial planning, feasibility, scope and concept development, detailed design, construction documentation, and construction administration * Assist with 3D modeling and design, conducting field investigations, performing red-to-black markup/review tasks, and producing discipline deliverables Qualifications Minimum Qualifications * Applicable Associate degree or technical trade school certification * 0 to 3 years of experience required including field experience in either a design or construction capacity Additional Qualifications * Basic proficiency in Revit and AutoCAD MEP is preferred * Basic proficiency in Microsoft Office preferred * Experience with implementing fundamental design aspects of HVAC, mechanical utility, and piping system design preferred * Understanding of the applicable building codes, technical and design aspects of CRB's market areas, and will be expected to work closely with architectural, engineering, and construction staff members to ensure assignments are completed accurately and efficiently Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description The Mechanical Designer is responsible for maintaining effective mechanical design bases for transformer layouts and for providing technical expertise to customers both within and outside of the organization. This role will review projects assigned to them comparing customer specifications to other design data, noting any inconsistencies or special requirements. The Mechanical Designer will be expected to utilize any and all operating programs to function effectively. We are looking for entry level candidates pursuing or having completed a 2-year technical program in mechatronics or mechanical design technology. Experienced candidates in our industry will also be considered. PRINCIPLE DUTIES AND RESPONSIBILITIES Complete transformer mechanical design including internal and external layout of components and accessories based on documentation provided in project design folder, standard practices, and/or from technical advisors. Calculate dimensions, allowances, and specifications per standard procedures or general design knowledge of shop capabilities when standard procedures do not exist. Verify and update programs. Provide technical support and training of others. Assist the supervisor in the planning and scheduling of the design and detailing processes. Responsible for directing or executing corrective action when shop problems are encountered. Consult with shop and QA personnel on interferences or interpretation of engineering information. Assist on development projects as requested by supervisor. This may also include completion of standard processes or practices and computer programs. Recommend and develop new procedures to improve the efficiency of the design and/or detailing process. Provide support to Quote Designers, such as bid or preliminary outlines and mechanical optimization. KNOWLEDGE, SKILLS & ABILITIES Excellent process and problem solving skills Duties require an understanding of shop methods, industry standards, and drafting procedures Some occasional travel may be required Excellent team player with strong people skills; able to build relationships at all levels of the organization Effective communication skills, including verbal (logical and organized), written, listening and presentation Computer skills: highly proficient in Microsoft Office applications and ProE, PTC Creo Proven ability to perform assignments under minimal supervision, with assistance as required for design questions or technical problems EDUCATION AND EXPERIENCE Required Education / Experience Associate's Degree in Mechanical Engineering Drafting and Design or related field Previous experience in PTC Creo Preferred Education / Experience SAP experience ADDITIONAL INFORMATION Key Working Relationships Engineering Organization, including mechanical, electrical, manufacturing and applications engineering groups Operations Management, including plant Supervision, Quality, Planning, etc. Physical Demands Must be able to walk, stand, sit, stoop, squat, and kneel for extended periods of time. Must be able to lift and carry up to 50 pounds. Working Conditions Primarily shop floor plus time in office environment located on large manufacturing campus. Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.

Job Title : Engineer I | Pay rate: $35/hr on W2 Duration : 3 months contract (On-Site) with possibility of extension. Candidate to make $35/hr 8-5 M-F 1-3 years Experience in role. Performs conventional, less complex engineering assignments that may involve equipment or product design, testing of materials, preparation of specifications, process studies, or research investigations. Duties include analysis of designs, cost reductions, implementing quality/reliability improvements and making recommendations for product applications along with testing and evaluating Eaton products and accessories and parts, etc. Position requires a B.S. degree in engineering with normally one to three years of related experience. - Qualifications Bachelors Degree Additional Information All your information will be kept confidential according to EEO guidelines.

Work in a fast-paced startup environment, as part of a top-notch team. Take pride in giving the world an excellent product that creates life-changing medical devices. This young company is growing and there will be opportunities to take on new responsibilities and grow into new roles. Requirements BS in engineering with at least 2 years of machine design engineering experience Experience that shows you can design and build complex machines (such as 3D printers). This may include professional experience and/or significant hobbies. To put it simply, proven ability to make things work. A broad skill set in mechanical design, engineering, and physics. Ability to spec out and build systems using motors, controllers and wiring, sensors, pumps, pneumatics, etc. AutoCAD experience Experience with tools. Specific expertise in mechanical design, CAD, and DFM is required. Ability to work as part of a team Communication skills Project management skills are a plus. Responsibilities Design, build, and improve 3D printers and other manufacturing equipment that include mechanical, optical, electrical, software, fluids, pneumatics, etc Develop and conduct well-designed experiments (on 3D printers and related manufacturing/processing equipment) to characterize and improve the performance of the process. Develop process and design documentation that will form the basis for the production of additional machines as well as quality assurance systems for existing machines. Why work here? Stock options... Share in the success by being a part owner in the company! The company values diversity, inclusion, trust, strong communication, great teamwork, and work-life balance. They are building something amazing that will unlock a wave of innovation in medical technology. 100% of Health premiums paid for employee Very little travel PTO and paid holidays 401k match up to 3.5% #ZR

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represent a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Applications Design Engineer-Principal Job Description: * Provide technical support to key customers in base station/ broadcasting/ Microwave RF Power areas both OEM accounts and distribution channel. * Design and optimize high performance RF Power amplifier device/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Design and optimize high performance RF Power amplifier demo board/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Work with device design team to design or optimize evaluation circuit to initiate meaningful design-in opportunity in key customers or verify the feasibility on innovation concept. * Manage the account on technical interface. Build and maintain relationships with development crews at customer sites. * Help on product quality complaint description and quality report explanation from tech. point of view. * Technically drive marketing activities, including seminar/exhibition/conference, collect market feedback and give suggestions to Product Line on NPD. * Manage lab facilities like DPD system/Loadpull system etc. Qualifications: * Bachelor/master's degree in electronic engineering with the focus on RF. * 5+ years experiences in RF design or applications, experience in high power amplifier is preferred. * Expert in RF laboratory equipment and measurement techniques. * Expert on the design of high-power RF circuits for Power Amplifier applications. * Highly knowledgeable on modelling techniques for non-linear systems, familiar with simulation tool like ADS/Microwave office/Momentum. * Highly knowledgeable on the physics of device operation. * Good understanding of RF circuit techniques for performance enhancements such as digital pre-distortion and Doherty. * Excellent problem-solving skills. * Have a proactive, implementation-focused approach. * Excellent verbal, written and presentation skills. Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. This position is eligible to receive restricted stock unit (RSU) awards and cash bonuses, solely at MACOM's discretion, subject to individual and company performance. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs. Benefits: This position offers a comprehensive benefits package including but not limited to: * Health, dental, and vision insurance. * Employer-sponsored 401(k) plan. * Paid time off. * Professional development opportunities.

Job Title: Facilities Engineer Duration: 12+ Months Notes: Fully Onsite Open for candidates with experience with project engineering and coordination experience Job Details: Position involves support of senior staff in the initiation, design, and delivery of projects, particularly for facilities related scope. Employ basic engineering skills and practices to gather user requirements and translate them into technical documentation for execution by third party firms. Assist with project definition by performing engineering studies and assessment for facilities system, perform quality and overall facilities walkdowns. Perform field evaluations of existing systems and provide engineering design recommendations. Skills: self-started, ability to communicate effective Top 3 Must Have Skill Sets: 1. Ability to work well under pressure 2. Facilities knowledge and experience 3. Great communication skills 4. Proactive 5. Willingness to learn new experiences

Insight Global is seeking a Senior Utilities Engineer to work for one of our largest pharmaceutical manufacturing companies in the Sanford, NC area. This individual will be responsible for providing technical and engineering expertise to maximize site equipment availability, reliability and reduce maintenance costs through system and process continuous improvement, i.e., LEAN principles and Continuous Improvement methodology. Develop and implement strategies and methods that improve preventive maintenance processes and procedures resulting in enhanced equipment performance. Technically support all aspects of maintenance operations while ensuring compliance with SOPs, cGMPs, safety procedures, quality standards, OSHA standards, other regulatory agency standards, good maintenance practices, and corporate initiatives. Responsibilities: Engineering SME responsible for regulated utility (Clean Steam, WFI and Compressed Gas) generation and distribution. Work closely with manufacturing personnel/other departments to resolve manufacturing issues and implement process improvements. Act as a liaison between maintenance and manufacturing personnel for corrective work and utilities support. Support implementation of process equipment upgrades and optimization. Capital projects for new bioprocess equipment purchase, installation and facility integration. Trouble shooting issues with utility support of process equipment. Coordination with other plant engineers, validation and automation colleagues in support of manufacturing operations Subject matter expert for adherence to all regulatory requirements pertaining to regulated utilities Perform equipment evaluations to determine and justify new equipment, equipment replacement and incorporate into capital plan. Review equipment for condition, performance, and maintenance history; assessing the liability caused by marginal equipment performance; assessing the cost and value of overhauling or upgrading to the cost of replacement; and creating justifications for capital replacements. Recommending and presenting capital equipment purchases to facilitate campus growth and to maximize equipment reliability. Qualifications A minimum of a BS degree + 15 years of relevant experience Direct knowledge and extensive experience in project management and regulated utilities (RO, WFI, clean steam, compressed gases, etc.) within a biopharmaceutical or pharmaceutical cGMP environment is required. Plusses: Professional Engineer or Certified Project Management certification preferred. Experience with FDA and EU licensing and inspection is beneficial. Familiarity with manufacturing and/or utilities equipment and operations is desired. Experience in both Global Engineering and site level engineering is strongly preferred

Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible™. Learn more at ************** and on LinkedIn and Twitter (X). LTspice Modeling Engineer - Senior Level Position Analog Devices, Durham, NC, Wilmington, MA Analog Devices, Inc: Analog Devices (NASDAQ: ADI) is a world leader in the design, manufacture, and marketing of a broad portfolio of high-performance analog, mixed-signal, and digital signal processing (DSP) integrated circuits (ICs) used in virtually all types of electronic equipment, dedicated to solving the toughest engineering challenges. We enable our customers to interpret the world around us by intelligently bridging the physical and digital with unmatched technologies that sense, measure, power, connect, and interpret. Position Overview: As ADI expands into new product and market segments, the Multi-Market Power Group (MMP) is looking for a Senior LTspice Modeling Engineer who will be responsible for: Creating LTspice simulation models. Maintaining and debugging existing models, working closely with the Modeling Team. Special projects involving technology improvements to our tools and techniques to maintain our competitive advantage. Interfacing with IC Designers, Application Engineers, Marketing and Sales, and Management. Maintain good and professional communications dialog with both internal and external customers. In this position, you will: Develop behavioral circuits to model switching converters, and other ADI products as well. Use existing model base to learn modeling techniques and grow in skill and knowledge. Help mentor the junior engineers in our team. Take the lead in developing technology platforms to accelerate model development and verification. Exercise mathematical intuition and analysis to select best approaches. Support field and/or customer questions on existing models. Occasional technical writing, presentations, brainstorming sessions, and trainings. What you need to be successful in this role: BSEE or MSEE with 10+ year experience and either deep experienced in switching power converters or analog IC design. With a passion to do modeling. Strong background in analog and digital circuits, with circuit analysis techniques. Strong analytic skills along with power electronics and control theory. IC applications experience a plus, modern laboratory equipment use a plus. Some level and knowledge of programming useful, MatLab/Simulink, Python, and C/C++. Good technical writing and presentation skills. Must possess good communication skills and have ability to work as a part of a multidisciplinary team. Ability to work independently and it is important to be a self-starter. For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law. Job Req Type: ExperiencedRequired Travel: Yes, 10% of the time Shift Type: 1st Shift/Days

****Must be in commuting distance to Garner, North Carolina.**** About Us We are an established, employee-owned (ESOP) manufacturing company specializing in poultry chiller systems and related process equipment used in high-volume food processing environments. Our work is highly collaborative across engineering, fabrication, field service, and project management. We value practical problem-solving, accountability, and supporting each other in delivering reliable systems to our customers. Position Summary The Mechanical Designer will work as a key contributor on our Engineering team to develop and maintain manufacturing drawings, equipment layouts, assemblies, and installation details for our poultry chiller systems and associated equipment. This role is both office and field oriented. The candidate will spend most of their time developing 3D mechanical models and drawings, while also participating in site visits for field measurements, equipment documentation, and occasional 3D LiDAR scanning. This is a strong role for someone who enjoys hands-on, real-world engineering and the technical details required to build and install equipment that works right the first time. Key Responsibilities Create and maintain 3D models and 2D fabrication drawings using Autodesk Inventor (Similar experience, e.g. SolidWorks, is acceptable with willingness to transition). Develop complete mechanical drawing packages including assemblies, detailed part prints, weldment drawings, and bill of materials (BOMs). Work directly with shop personnel (welders, fabricators, machinists) to verify manufacturability, ease of fabrication, and clarity of documentation. Conduct field investigations at poultry processing facilities to gather dimensions, document existing equipment, and assess installation constraints. Assist with or perform 3D LiDAR scanning of existing equipment and environments (experience preferred, but training available). Support installation teams with drawing clarifications and technical detail during project execution. Participate in internal reviews to ensure accuracy, quality, and adherence to company standards. Maintain structured drawing and document control practices. Required Qualifications Bachelor's degree in Mechanical Engineering or related field, OR proven equivalent technical experience in mechanical design. 3-7 years of mechanical design experience in a manufacturing or industrial environment. Proficiency in 3D parametric CAD software (Inventor, SolidWorks, or similar). Strong understanding of fabrication processes including welding, machining, and sheet metal manufacturing. Ability to read and apply weld symbols, tolerancing standards, and mechanical detail drawings. Ability to implement a systematic, data-driven approach to investigate and resolve significant or recurring problems within an organization's processes, products or systems. Comfortable working in food processing plants, mechanical rooms, and shop floors. Comfortable engaging and communicating with customers in similar industries. Willingness to travel 1-2 times per month for short domestic trips (typically 1-3 days). Preferred Qualifications Experience using FARO or similar 3D LiDAR scanners and processing point clouds. Familiarity with Autodesk Vault or other PDM systems. Understanding of stainless steel fabrication and sanitary equipment design. Experience with equipment layout in constrained or retrofit environments. Experience with root cause techniques and analysis. Work Environment Approximately 75% office / 25% field (which may include plant environments with elevated temperatures, humidity, and wet conditions). Requires ability to climb, crawl, or maneuver around installed equipment for dimension gathering. Standard PPE provided and required during field visits. Benefits: Health/Dental/Vision Insurance Vacation Time Sick Time Life Insurance Long Term Disability ESOP (Employee Stock Ownership Plan) Must be authorized to work in the U.S. We look forward to welcoming a new member to our team!

The Mechanical Designer is responsible for maintaining effective mechanical design bases for transformer layouts and for providing technical expertise to customers both within and outside of the organization. This role will review projects assigned to them comparing customer specifications to other design data, noting any inconsistencies or special requirements. The Mechanical Designer will be expected to utilize any and all operating programs to function effectively. PRINCIPLE DUTIES AND RESPONSIBILITIES Complete transformer mechanical design including internal and external layout of components and accessories based on documentation provided in project design folder, standard practices, and/or from technical advisors. Calculate dimensions, allowances, and specifications per standard procedures or general design knowledge of shop capabilities when standard procedures do not exist. Verify and update programs. Provide technical support and training of others. Assist the supervisor in the planning and scheduling of the design and detailing processes. Responsible for directing or executing corrective action when shop problems are encountered. Consult with shop and QA personnel on interferences or interpretation of engineering information. Assist on development projects as requested by supervisor. This may also include completion of standard processes or practices and computer programs. Recommend and develop new procedures to improve the efficiency of the design and/or detailing process. Provide support to Quote Designers, such as bid or preliminary outlines and mechanical optimization. KNOWLEDGE, SKILLS & ABILITIES Excellent process and problem solving skills Duties require an understanding of shop methods, industry standards, and drafting procedures Some occasional travel may be required Excellent team player with strong people skills; able to build relationships at all levels of the organization Effective communication skills, including verbal (logical and organized), written, listening and presentation Computer skills: highly proficient in Microsoft Office applications and ProE, PTC Creo Proven ability to perform assignments under minimal supervision, with assistance as required for design questions or technical problems EDUCATION AND EXPERIENCE Required Education / Experience Associate's Degree in Mechanical Engineering Drafting and Design or related field Previous experience in PTC Creo Preferred Education / Experience SAP experience ADDITIONAL INFORMATION Key Working Relationships Engineering Organization, including mechanical, electrical, manufacturing and applications engineering groups Operations Management, including plant Supervision, Quality, Planning, etc. Physical Demands Must be able to walk, stand, sit, stoop, squat, and kneel for extended periods of time. Must be able to lift and carry up to 50 pounds. Working Conditions Primarily shop floor plus time in office environment located on large manufacturing campus. Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.