Mechanical engineering internship jobs in Lake Oswego, OR

The Sr. Mechanical Engineer applies engineering techniques to design, install, modify, analyze, repair and test tools, engines, machines and other mechanically functioning equipment. Leads and supports the mechanical design, testing, and production of electrical machines as well as the design of electronics packaging for high altitude aerospace applications. Leads or supports mechanical packaging development effort for electronic equipment that withstand stringent environmental requirements (i.e., mass, volume, thermal, vibration). Manages mid-size development projects outsourced to sub-contractors (development of a system, equipment or components). Location: Hood River, OR Position Responsibilities + Leads or supports the thermal, structural, dynamic, and fluid flow analysis efforts for electronics equipment + Leads the testing and data collection in the laboratory and the field + Models the mechanical devices and selects the proper material + Performs stress and fatigue analysis; Performs thermal analysis and selects bonding material + Develops mechanical drawings and specifies the dimensional tolerances + Develops assembly instructions and test procedures + Develops test plans and test procedures to verify designs + Works on complex issues where analysis of situations or data requires an in-depth knowledge of variable factors + Executes team assignments effectively following the given schedule, milestone, and available resources. May coordinate activities of other personnel (Team Lead). + Other duties as assigned Basic Qualifications (Required Skills & Experience) + Minimum 8 - 12 years of relevant technical experience in Mechanical Engineering, of which a minimum of 5 years in developing for production rotating electrical machines, electronics equipment packaging solution, and/or mechanical devices solutions for industrial and aerospace applications + Experienced in developing requirements specification for mechanical subsystems and according to MIL-STD 961D standard or equivalent + Has sufficient proficiency with the following CAD /CAE tools to perform one's position responsibilities: + SolidWorks for mechanical modeling. + ANSYS for structural and fatigue analysis + ANSYS Icepack for thermal analysis. + Extensive experience with Solid Works and designing electrical rotating machines for high- performance applications + Extensive experience with thermal management tradeoffs and solutions and materials properties + Experienced with bonding techniques for extreme environmental conditions using different adhesives + Experienced with manufacturing methodologies of electrical machines + Experienced with creating and maintaining product document tree + Experienced with creating and maintaining products bill of materials (BOM) + Experienced with test and measurement techniques, such as torque transducer calibration and instrumentation Other Qualifications & Desired Competencies + MS degree in Mechanical Engineering is preferred + Recognition by a reputable international engineering society such as ASME at the senior membership level or higher is desired + Demonstrates familiarity with MIL-STD-810 or DO-160 + Demonstrates familiarity with MIL-STD 961D standards (or equivalent) for developing subsystem technical specifications + Demonstrates full understanding & knowledge of engineering principles in the technical discipline and successfully works independently + Effectively articulates concepts and ideas to both technical and non-technical staff + Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties + Displays strong initiative and drive to accomplish goals and meet company objectives + Takes ownership and responsibility for current and past work products + Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company + Has effective problem-solving, analytical, interpersonal and communication skills (Verbal and written) + Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands + Ability to work in an office and production environment (Constant) + Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) The salary range for this role is: $107,370 - $152,250 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizenship required. Must be willing to work on government contracts and have the ability to obtain a security clearance. **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

Knife River is a People-first company. Our team members are the key to our success, and we are committed to giving them the tools, training and time to do their jobs productively and go home safely each day. Our goal is to build strong teams that, in turn, build strong communities. Join our growing team today! We are looking to add a Diesel Mechanic Intern to our team for Summer 2026 at one of our Portland, OR locations! Minimum Qualifications: * Pursuing a Higher Education degree in a related field. Must be currently enrolled! * Interest in serving the materials/construction industry * Ability to pass a pre-employment criminal background check and drug screen * Display a professional and courteous attitude towards all team members How to Apply: To be considered for this position, candidates must complete and submit an employment application at jobs.kniferiver.com by the posting deadline noted above. If unable to complete an application online you may print and send completed application to any Knife River NW address or stop in one of our locations to complete an application. Knife River is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, age, color, religion, gender, gender identity, sexual orientation, national origin, disability, protected Veteran status or any other protected category under applicable state/federal law. If you are an individual with a qualified disability as defined by federal, state, or local law and require a reasonable accommodation to complete any part of the application for any reason, please contact your state employment agency or you may call ************ to speak with a human resources representative. Subject to pre-employment drug testing and background check.

About the Company Panthalassa is a renewable energy and ocean technology company committed to rapidly developing and deploying technologies that will ensure a sustainable future for Earth by unlocking the vast energy potential of its oceans. Our mission is to capture civilizational levels of ultra-low-cost renewable energy for applications including computing and affordable renewable fuels delivered to shore. We are headquartered in Portland, Oregon, and operate as a public benefit corporation backed by leading venture capitalists, philanthropic investors, and university endowments. Our team includes individuals with experience at SpaceX, Tesla, Apple, Blue Origin, the U.S. military, and leading research universities. We operate as an idea meritocracy-where the best ideas win-and we're building the most capable engineering and operations team on the planet. About the Job We are seeking an experienced Test Engineer, Mechanical and Fluid Systems to design, build, and operate large-scale test equipment for hydraulic turbines, electrical generation powertrains, and high-power equipment. This role requires deep expertise in fluid dynamics, process piping, and mechanical system integration. As a Test Engineer, you will lead the mechanical design and integration of test rigs that handle pressurized water and air to transfer energy. You will work closely with software and controls engineers to create integrated test environments that push the boundaries of power generation technology. This is a hands-on role where you will prototype, build, and troubleshoot alongside world-class engineers and technicians. You will own the end-to-end mechanical development of test systems-from conceptual design through fabrication, assembly, and operation-ensuring our test infrastructure can withstand the extreme conditions required for breakthrough energy technology development. Responsibilities Design, build, modify, and operate custom test rigs for hydraulic turbines, powertrains, and power electronics systems. Design fluid systems and piping networks, including flow/pressure drop analysis and component sizing and selection (pumps, valves, regulators, piping). Design process piping and plant layouts with emphasis on rapid deployment and practical solutions. Design tanks, structures, rigging, and lifting equipment for large loads, including cranes and forklifts. Develop Process and Instrumentation Diagrams (P&IDs) for test rigs. Create 3D CAD models and assemblies using NX. Develop test methodologies, procedures, and safety protocols. Integrate mechanical systems with electrical and control systems in cross-functional collaboration. Interface with tradespeople and vendors for equipment procurement and subcontracted work. Perform hands-on assembly, integration, troubleshooting, and testing. Required Qualifications Bachelor's or Master's degree in Mechanical Engineering or related field. 5-10+ years of experience in large-scale fluid systems design and testing. Strong knowledge of fluid mechanics, thermodynamics, and heat transfer. Proven experience with process piping design, specification, and installation. Experience designing tanks and vessels for large-volume fluid storage. Expert-level proficiency in 3D parametric CAD and PLM (NX preferred; SolidWorks, Catia, Inventor, or Creo acceptable). Experience designing custom machined and welded components for test fixtures and structures. Competency in structural analysis and mechanical design calculations. Working knowledge of electrical power systems and basic connector selection. Familiarity with NFPA 79 (Electrical Standard for Industrial Machinery). Understanding of ASME and ANSI piping/pressure vessel codes. Knowledge of industrial safety practices (DFMEA, PFMEA, HAZOPS). Hands-on mechanical assembly, fabrication, and troubleshooting experience. Experience managing subcontractors and working with skilled trades. Strong written and verbal communication skills. Desired Qualifications Experience with computational fluid dynamics (CFD) analysis. Background in power generation, renewable energy, or heavy industrial equipment. Professional Engineer (PE) license. Experience with crane operations and lift planning. Background in manufacturing or production environments. Familiarity with heat exchangers and fluid conditioning equipment. Experience with high-power and high-pressure systems. Experience with test instrumentation and measurement systems. Familiarity with rapid prototyping and fabrication methods. Experience with programming or scripting (Python, LabVIEW, MATLAB) and data acquisition systems. The above qualifications are desired, not required. We encourage you to apply if you are a strong candidate with only some of the desired skills and experience listed. Additional Requirements Occasional extended hours or weekend work to support key milestones. Strong preference for candidates based in Portland, OR. Compensation and Benefits If hired for this full-time role, you will receive: Cash compensation of $155,000-$200,000. Equity in the company. We're all owners and if we're successful, this equity should be far and away the most valuable component of your compensation. A benefits package that helps you take care of yourself and your family, including: Flexible paid time off Health insurance (the company pays 100% of gold level PPO plan for full time employees, their partners, and dependents) Dental insurance (the company pays 33% for full time employees and 100% for their partners and dependents) Vision insurance (the company pays 100% for full time employees, their partners, and dependents) Disability insurance (the company pays 100% for a policy to provide long term financial support if you become disabled) Ability to contribute to tax-advantaged accounts, including 401(k), health FSA, and dependent care FSA Relocation assistance to facilitate your move to Portland (if needed). Location This is an onsite position. Our offices, lab and shop, are located in Portland, Oregon. Candidates must have the legal right to work in the United States. We are unable to provide new visa sponsorship for this role; however, we may consider H-1B transfer applications from exceptional candida tes.

Senior Mechanical Engineer SALARY | $130k-$160k DOE JOIN OUR TEAM! We are a leading design-build mechanical contractor serving Oregon and Southwest Washington. Our comprehensive services include new construction, tenant improvement, engineering, maintenance, controls, energy services, and commissioning, making us a one-stop solution for our clients' mechanical needs. What sets us apart is our commitment to collaboration and efficiency. Our team of skilled professionals works together to deliver high-quality projects that save our clients time, money, and stress. We've built a solid reputation for excellence across various sectors, including commercial, educational, healthcare, manufacturing, and more. Whether it's a small retail renovation or a large-scale office tower, we approach every project with the same level of dedication and expertise. WHAT WE'RE LOOKING FOR We are seeking a talented Senior Mechanical Engineer with 7-10 years of experience in HVAC design. This role requires a PE License and a passion for delivering high-quality engineering solutions. KEY RESPONSIBILITIES Lead the design and development of HVAC systems for a variety of project types, ensuring compliance with industry standards and client specifications. Collaborate closely with our design-build team to integrate mechanical systems seamlessly into overall project plans. Oversee the preparation of detailed engineering calculations, construction documents, and specifications. Provide technical leadership and mentorship to junior engineers and other team members. Engage with clients, contractors, and other stakeholders to ensure project objectives are met. Stay updated with industry trends and emerging technologies to continuously improve our service offerings. WHAT YOU BRING TO THE TABLE 7-10 years of experience in HVAC design, with a proven track record in delivering successful projects. Professional Engineer (PE) License is required. Strong knowledge of mechanical systems, materials, and industry standards. Excellent communication skills, with the ability to convey complex technical information to non-technical stakeholders. Ability to manage multiple projects simultaneously while maintaining a high level of quality. Proficiency in relevant engineering software and tools. WHY US? Join a company that is not only recognized as a leader in the mechanical contracting industry but also values its employees' growth and development. We offer competitive compensation, excellent benefits, and a dynamic work environment where collaboration and innovation are encouraged. If you're ready to take your career to the next level and be part of a team that makes a real impact, we want to hear from you!

We are partnering with an innovative renewable energy company that is harnessing the power of the open ocean-Earth's largest and most power-dense renewable resource-to deliver abundant, affordable clean energy. They are seeking a Lead Mechanical Engineer to play a critical role in the design, development, and deployment of the turbogenerator within their core technology. This is a hands-on position where you'll guide the technical vision while also prototyping, testing, and problem-solving alongside a world-class team. If you are passionate about renewable energy and want to help build technology that can transform the future of clean power, this is your chance. The role is located in Portland, OR. Benefits: Salary: $175k - $250k/year. If your target pay is higher, we still encourage you to apply-we could request adjustments based on experience and market conditions. Equity. Flexible PTO (with minimum 3 weeks required). 100% employer-paid medical insurance. Dental & Vision insurance. 401k. Relocation Assistance. Other excellent benefits! What You'll Do: Lead the design, development, and integration of the turbogenerator system. Define and own performance requirements and design goals. Design and analyze key components: shafts, housings, bearings, dynamic seals, turbine blades, and stators. Select advanced materials and coatings for long-term marine deployment. Collaborate across electromagnetics, controls, fluid dynamics, and marine operations teams. Drive manufacturability, offshore assembly, and serviceability in design. Lead and participate in design reviews with internal teams and external vendors. Oversee documentation, drawings, and tolerance analysis. Mentor technicians and guide prototyping, fabrication, and testing. Troubleshoot issues, conduct root cause analysis, and iterate designs. Utilize high-end CAD (NX), PDM (Teamcenter), and FEA tools. Required Qualifications: Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Naval Architecture, or related. Extensive experience with rotating machinery (pumps, turbines, compressors, turbochargers, etc.). 5+ years of 3D CAD modeling experience. Strong knowledge of GD&T, tolerance stack-ups, and FEA. Hands-on experience assembling tight-tolerance rotating equipment. Proven ability to manage projects from concept through test and deployment. Strong communication, leadership, and problem-solving skills. Desired Qualifications (a plus, not required): Advanced degree or additional 5 years of experience. Prior leadership of engineering teams. Background in marine/offshore machinery design. Experience with subsea bearings, hydrodynamic/hydrostatic bearings, or piping systems. Familiarity with rapid prototyping and instrumentation/controls. NX/Teamcenter, NASTRAN, FEMAP, or similar analysis software. Programming/data analysis with Python or Julia. Application Process If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Inside the Role DTNA (Daimler Trucks North America) is the world's largest heavy duty vehicle manufacturer, we design the Freightliner and Western Star brands for markets in North America, Latin America, Australia, and many other parts of the world. The Chassis Structures group is a member of the Product Engineering department and works to develop and design the structural backbone of the vehicle which includes frame rails and crossmembers, fuel, DEF and air tanks, heavy low and high voltage cabling and battery boxes, handling of routed commodities, mid-chassis upfit provisions, and compressed air generation, treatment, and distribution. The position is within the compressed air team and its duties focus on design of air dryers, discharge lines, and compressor control piping. Posting Information We provide a scheduled posting end date to assist our candidates with their application planning. While this date reflects our latest plans, it is subject to change, and postings may be extended or removed earlier than expected. We Take Care of Our Team Position offers a starting salary range of $86,000 - $110,000 USD Pay offered dependent on knowledge, skills, and experience. Benefits include annual bonus program; 401k company contribution with company match up to 6% as well as non-elective company contribution of 3 - 7% depending on age; starting at 4 weeks paid vacation; 13+ calendar holidays; 8 weeks paid parental leave; employee assistance program; comprehensive healthcare plans and wellness programs; onsite fitness (at some locations); tuition assistance and volunteer paid time off; short-term and long-term disability plans. What You Drive at DTNA Develop vehicle components and systems. Apply engineering and CAD principles to create complex designs that are reliable, serviceable, energy efficient, and competitive. Apply sound engineering judgment to develop engineered solutions across the design lifecycle and to support the manufacturing plants, quality assurance, and the service dept. Develop specifications and concepts to support future vehicles projects. Maintain and organize these solutions, document their use, and keep them up to date. Interface with our multi-tier suppliers and other groups such as the Vehicle Engineering dept, Validation, Analysis, Compliance, Manufacturing, Sales, and Marketing, to ensure conformance of designs to specifications, customer expectations, engineering practices and government regulations. Knowledge You Should Bring Bachelor of Mechatronics, Mechanical, or related degree in engineering, or a corresponding associates degree with 4 years related experience requires 2-4 years of relevant experience or 6 years experience in lieu of degree Experience with CADD software. Experience in CADD design of structures and/or design of pneumatic solutions. Experience with manufacturing processes, MRP systems, and Spec Requirements tools, such as ELM. An understanding of the principles of fluid mechanics as it relates to pneumatics, moisture, and related thermodynamics. Requires understanding of key business drivers Works independently within guidelines and policies to solve problems of moderate complexity Provides informal guidance to new team members May lead projects or processes as required Exceptional Candidates Might Have Experience working with people responsible for Engineering Systems, Feature requirements, Software, Architecture, and Functional Safety. Experience with pneumatic specifications, components, and industry safety practices. Strong independence in managing multiple assigned projects. Training in basic control systems design Where We Work This position is open to applicants who can work in (or relocate to) the following location(s)- Portland, OR US. Relocation assistance is not available for this position. Schedule Type: Hybrid (4 days per week in-office / 1 day remote). This schedule builds our #OneTeamBestTeam culture, provides an unparalleled customer experience, and creates innovative solutions through in-person collaboration. At Daimler Truck North America, we recognize our world is changing faster than ever before. By listening to the needs of today, we're building to solve with cutting-edge solutions in sustainability and future driving technology across electric, hydrogen and autonomous. These solutions, backed by years of innovative success and achievement, continue DTNA's legacy as the undisputed industry leader. Our evolving brand portfolio is second to none, including Freightliner Trucks, Western Star, Demand Detroit, Thomas Built Buses, Freightliner Custom Chassis, and Financial Services. Together, we work as one team towards our envisioned future - building a cleaner, safer and more efficient tomorrow for all. That is what we are working toward - for all who keep the world moving. Additional Information This position is not open for Visa sponsorship or to existing Visa holders Applicants must be legally authorized to work permanently in the country the position is located in at the time of application Final candidate must successfully complete a criminal background check Final candidate may be required to successfully complete a pre-employment drug screen Contractors, professional services, or other contingent workers should confirm with their local agency if they are eligible to apply for FTE positions EEO - Disabled/Veterans Daimler Truck North America is committed to workforce inclusion and providing an environment where equal employment opportunities are available to all applicants and employees without regard to race, color, sex (including pregnancy), religion, national origin, age, marital status, family relationship, disability, sexual orientation, gender identity and expression (including transgender and transitioning status), genetic information, or veteran status. For an accommodation or special assistance with applying for a posted position, please contact our Human Resources department at ************ or toll free ************. For TTY/TDD enabled call ************ or toll free ************.

We are seeking an Industrial Designer specializing in sheet metal design for finishing systems. The role involves creating 2D and 3D models, preparing detailed manufacturing drawings, and collaborating with engineers to meet project goals. Proficiency in Autodesk Inventor and/or SolidWorks is preferred. Responsibilities + Design sheet metal components and assemblies for finishing systems. + Create detailed manufacturing documentation in 3D. + Collaborate with engineers and project managers. + Utilize AutoCAD and other modeling software for designs. + Optimize product aesthetics and functionality. + Manage design projects from concept to production. Essential Skills + Proficiency in Autodesk Inventor and/or SolidWorks. + Experience with sheet metal design. + Ability to create 2D and 3D models. + Experience in powder coating. Additional Skills & Qualifications + Experience in sheet metal and powder coating. + Experience in managing design projects from concept to production. Work Environment The position involves working onsite in a cubicle with the engineering team, as well as hands-on interaction with the product on the floor. The facility is located in Vancouver and is equipped with multiple spray booths capable of handling projects ranging from automotive to aerospace and defense sectors. Job Type & Location This is a Contract to Hire position based out of Vancouver, WA. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Vancouver,WA. Application Deadline This position is anticipated to close on Dec 23, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Premier Pump & Power has been a leading manufacturer of customizable, portable pump packages since 1999, building custom pump products from design to fabrication to final assembly that meet and exceed our customers' expectations. Job Description Premier Pump & Power is seeking an entry-level mechanical engineer to join our core engineering team at our headquarters in Vancouver, Washington. Do you love collaborating on mechanical designs, technical drawings and schematics? The engineering team at Premier designs and continually improves the engines, pumps, trailer packages, enclosures and other industrial products for customers around the world. We are looking for that next dynamic individual to join our fast and fun team. This position is full time and reports to the Lead Engineer. Responsibilities Review technical drawings and modeling production work to ensure that builds and designs conform to specifications, codes, standards, and customer requirements Conduct field surveys, author drawings, and collect other data to assess state of ongoing builds and provide summary reports Conduct routine design reviews to verify integrity and completion of product designs before fabrication Interview and shadow assembly and fabrication staff to identify potential optimizations and recommend design adjustments, including consistency verification and problem analysis Work closely with senior engineers to review new product designs and update existing designs Take on projects outside core role during periods of peak demand and when needed, including administrative and assembly tasks Author assembly instructions, runbook documentation and standard operating procedures Participate in an on-call rotation schedule and respond to emergent requests Qualifications Bachelor's degree in mechanical engineering, or equivalent work experience Proficiency with Autodesk Inventor, SOLIDWORKs, or equivalent 3D CAD modeling software Familiarity with Microsoft Office suite, including Excel or equivalent Experience working on small and medium sized projects at an individual contributor scope, including technical implementation details Ability to work independently, effectively assess and prioritize projects and tasks Comfortable navigating complex and ambiguous work environment Fluency in English, ability to communicate ideas and decisions persuasively Hunger to learn new things, receive constructive feedback, grow professionally and gain experience on a fast-paced engineering team (Preferred) Familiarity with automation or scripting in at least one programming language Additional Information While visiting manufacturing facilities, performing inspections and troubleshooting in active assembly and fabrication areas, employees may be exposed to varying weather conditions, moving equipment and mid to high range of noise. All your information will be kept confidential according to EEO guidelines.

If you are looking to work for a dynamic and growing company performing engineering services for world leaders in the technology and industrial sectors, Corbin Consulting is the place for you. Challenge yourself and have fun working with a team of top performers who have earned a reputation for excellence among their clients and peers. Work for an employee-owned company that values its people and allows you to shape your future as you help the company continue its relentless growth. Advantages of working for Corbin Consulting Engineers: • Employees control their career advancement. You will have direct access to key project players, including design managers, disciplines designers, and officers. • Design building systems for leaders in the advanced technology, industrial sector and life sciences sectors. • Corbin serves a wide variety of clients with a myriad of unique projects and design challenges, providing a variety of working experiences. • We are not “corporate”; we are an engineering company committed to delivering excellence for our clients. Summary: We are seeking a junior mechanical engineer for our Beaverton office who will work with a competent multi-discipline team of peers with a wide range of experience levels. Responsibilities: • Designing mechanical and process systems and preparing construction documents with varying degrees of complexity. You will work with facility HVAC, process piping and exhaust, hydronic systems, and chip manufacturing equipment installations. • Preparing engineering studies for mechanical and process systems that survey existing conditions, evaluate capacities, and make recommendations for corrections and upgrades. • Preparation of P&ID drawings for various systems, construction specifications, sequence of operations, testing documents, and engineering reports. • Coordinating with other engineering team members, including those from other technical disciplines. • Conducting site investigations to confirm and document field conditions. Requirements • Understanding of basic building code requirements. • Excellent interpersonal skills and a team player. • Excellent technical writing ability. • Highly organized. • Must show ownership and follow-through on assigned projects. • Interest in professional growth. • Ability to learn quickly and grasp new concepts, especially as they relate to engineering and construction. • Proficiency with Microsoft Office Suite. • Familiarity with AutoCAD, Revit, and Bluebeam is a plus. Education and Experience: • Bachelor's degree in mechanical engineering from an accredited university. • 3+ years of experience working for an architectural/engineering (A/E) consulting firm. • Experience with advanced technology and industrial clients is preferred. • Possessing an EIT certification, or will in the near future. Please identify any relevant skills you might have, such as AutoCAD or Revit, or mechanical system modeling software such as PIPE-FLO, Trane Trace, Autodesk CFD, or AutoPIPE. Additionally, you may provide any past work or volunteer experience in your response, including those that may be non-engineering related. Wages/Benefits: We offer a very competitive compensation package within the engineering consulting industry. • Flexible work hours. • Comprehensive medical, prescription, dental and vision plans. • 401(k) plan with company matching • Employee Stock Ownership Plan (ESOP), offering benefits of company ownership through accumulation of available stock in a tax-deferred retirement account. • Three weeks of Personal Time Off (PTO) • Eight paid holidays per year. • Up to $3000/year in yearly tuition reimbursement for coursework relevant to your position. • Employer paid Life Insurance & Long-Term Disability. • Opportunities to learn engineering outside of work, such as lunchtime seminars with industry experts and professional development hour compensation.

REQUIREMENTS - Patent preparation and prosecution experience, either in-house or as outside counsel, specifically in the mechanical arts (e.g., recreational vehicles, industrial devices, medical devices, and consumer devices) - A BS degree in mechanical engineering is preferred, although candidates with other degrees will be considered - Additional legal, industry, and/or academic experience in mechanical engineering or related fields is desirable - Active bar admission in Oregon or Washington - Registered to practice before the USPTO - Strong time management and organizational skills, including demonstrated ability to take ownership for, and efficiently manage, a large docket including meeting internal and external deadlines - Familiarity with operations of large organizations with established patent programs, including international organizations - Strong work ethic and commitment to being responsive to client needs - Excellent writing, communication and interpersonal skills - Ability to collaborate and work effectively with a variety of internal and external stakeholders - Demonstrated ability working independently SUMMARY Vanguard Intellectual Partners (Vanguard-IP) specializes in the placement of IP/Patent professionals nationwide. Our sole focus on intellectual property enables us to more deeply understand our clients' technical needs, and our candidates' individual talents and career interests. Our broad network of long-term client relationships gives us a competitive edge. Our recruiters all have 10+ years of IP recruiting experience, and an exceptional record of success. We have superior knowledge of the IP job market, and offer trusted career advice for our candidates. We also have the resources and high-level contacts to get your resume noticed by the people who matter. We look forward to speaking with you, and learning more about what you are seeking in your next opportunity. CONFIDENTIALITY At Vanguard-IP, we respect the confidentiality of every candidate who contacts us. Furthermore, we will always obtain expressed authorization before submitting your resume to any of our clients. **Should you have an interest in exploring opportunities in another location, we have hundreds of openings in other markets. Please apply now and our team would be happy to review your information for this or other openings in your location of interest.

We are partnering with an innovative renewable energy company that is harnessing the power of the open ocean-Earth's largest and most power-dense renewable resource-to deliver abundant, affordable clean energy. They are seeking a Lead Mechanical Engineer to play a critical role in the design, development, and deployment of the turbogenerator within their core technology. This is a hands-on position where you'll guide the technical vision while also prototyping, testing, and problem-solving alongside a world-class team. If you are passionate about renewable energy and want to help build technology that can transform the future of clean power, this is your chance. The role is located in Portland, OR. Benefits: Salary: $175k - $250k/year. If your target pay is higher, we still encourage you to apply-we could request adjustments based on experience and market conditions. Equity. Flexible PTO (with minimum 3 weeks required). 100% employer-paid medical insurance. Dental & Vision insurance. 401k. Relocation Assistance. Other excellent benefits! What You'll Do: Lead the design, development, and integration of the turbogenerator system. Define and own performance requirements and design goals. Design and analyze key components: shafts, housings, bearings, dynamic seals, turbine blades, and stators. Select advanced materials and coatings for long-term marine deployment. Collaborate across electromagnetics, controls, fluid dynamics, and marine operations teams. Drive manufacturability, offshore assembly, and serviceability in design. Lead and participate in design reviews with internal teams and external vendors. Oversee documentation, drawings, and tolerance analysis. Mentor technicians and guide prototyping, fabrication, and testing. Troubleshoot issues, conduct root cause analysis, and iterate designs. Utilize high-end CAD (NX), PDM (Teamcenter), and FEA tools. Required Qualifications: Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Naval Architecture, or related. Extensive experience with rotating machinery (pumps, turbines, compressors, turbochargers, etc.). 5+ years of 3D CAD modeling experience. Strong knowledge of GD&T, tolerance stack-ups, and FEA. Hands-on experience assembling tight-tolerance rotating equipment. Proven ability to manage projects from concept through test and deployment. Strong communication, leadership, and problem-solving skills. Desired Qualifications (a plus, not required): Advanced degree or additional 5 years of experience. Prior leadership of engineering teams. Background in marine/offshore machinery design. Experience with subsea bearings, hydrodynamic/hydrostatic bearings, or piping systems. Familiarity with rapid prototyping and instrumentation/controls. NX/Teamcenter, NASTRAN, FEMAP, or similar analysis software. Programming/data analysis with Python or Julia. Application Process If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

ReconCraft is seeking a SolidWorks Mechanical Designer to join our growing team in Clackamas, OR. This position plays a key role in the design and development of manned and unmanned boats, leveraging advanced 3D modeling and drafting tools to support our engineering and production teams. The Mechanical Designer will be responsible for developing system layouts, foundation designs, routings, bills of materials, production detailing, CNC cut plate files, fixture designs, and more. The ideal candidate will bring proven expertise in SolidWorks, SolidWorks PDM, and AutoCAD, along with experience supporting manufacturing and production environments. Responsibilities (including but are not limited to): * Utilize SolidWorks, SolidWorks PDM, and AutoCAD to create 3D models, assemblies, and detailed production drawings. * Collaborate with engineering, production, and fabrication teams to optimize designs for manufacturability, efficiency, and quality. * Partner with suppliers and external stakeholders to integrate third-party components into design models. * Revise and update existing designs by implementing redline changes and generating revised drawings and solid models. * Translate rough concepts and input from end users, maintainers, and fabricators into draft designs and prototypes. * Develop jig and fixture designs, including fabrication drawings, machining documentation, and bills of materials. * Apply industry design standards, best practices, and technical references to create reliable boat and system designs. * Contribute to a collaborative, high-performance team dedicated to advancing marine technology and production innovation. * Perform other duties as directed by the Engineering Manager. Essential Job Qualifications and Requirements: * Experience: * Minimum 3 years of experience in manufacturing design and production using 3D and 2D CAD programs. * Hands-on knowledge of marine or transportation mechanical systems preferred. * Practical experience with fabrication methods such as welding, CNC cutting and forming, and other modern manufacturing processes. * Solid product development experience using SolidWorks to support in-house manufacturing. * Preferred Knowledge & Experience * Advanced proficiency with SolidWorks, SolidWorks PDM, and AutoCAD. * Share expertise, mentor team members, and contribute to team-wide best practices. * Physical Requirements * Ability to lift up to 25 lbs. * Flexibility to work extended hours when required to meet project deadlines or deliverables. About Copper River & The Native Village of Eyak: Owned by the Native Village of Eyak (NVE), a federally recognized Alaska Native Tribe, the Copper River Family of Companies are a collection of entities that deliver a complementary set of solutions and services to support the diverse missions and requirements of our clients. Proud participants of the Small Business Administration's (SBA) 8(a) Business Development Program since 2006, our companies consist of both current and graduation SBA 8(a) entities. It is our collective purpose to support the Tribe and diversify the NVE's ability to facilitate economic advancement. The income generated from our companies helps the Native Village of Eyak fund health and social services, economic development, natural resource/environmental education, jobs, job training, and other benefits to the NVE in a manner that is consistent with Alaskan Native cultural values and traditions. Copper River's Culture The Copper River Family of Companies has a positive, supportive, and thriving culture. At the foundation of our culture is a focus on collaboration. No matter your role or which operating company you work for, we are ONE TEAM working toward the same goals for our customers and for our collective owner- The Native Village of Eyak. How we treat each other is just as important as the work we deliver. Benefits * Comprehensive medical, dental, and vision coverage * Flexible Spending Account - healthcare and dependent care * Health Savings Account - high deductible medical plan * Retirement 401(k) with employer match * Open leave policy and paid holidays * Additional benefits including tuition reimbursement, transportation expense account, employee assistance program, and more! Note: These benefits are only applicable to full time, regular associates at Copper River. Disclaimer: The Copper River Family of Companies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Create a Job Alert Interested in building your career at The Copper River Family of Companies? Get future opportunities sent straight to your email. Create alert

At KPFF Consulting Engineers, we are more than just an engineering design firm. For 65 years, we have dedicated ourselves to innovative, sustainable engineering that shapes the built environment and tackles complex infrastructure challenges. Our team culture emphasizes balance, growth, and well-being, supporting each member's professional journey with flexibility, generous benefits, and a collaborative approach to work-life integration. With over 1,400 professionals across 30 offices nationwide, KPFF's decentralized structure allows each office the flexibility to pursue projects aligned with their regional strengths. Learn more at ************* Job Description What are your plans for next summer? At KPFF, we are looking for Protective Design Engineer Interns to join our team of engineers in San Francisco and Portland who are eager to apply their skills to projects that focus on the safety, resilience, and security of the built environment. As an intern with us, you will have the opportunity to contribute to projects that involve blast analysis, progressive collapse evaluation, anti-ram design, and structural hardening for federal, commercial, and infrastructure clients. You won't just observe, you'll play an active role in the engineering process and learn how protective design integrates with structural engineering to safeguard people and critical facilities. Here's what you can expect: Hands-on project work: Support protective design projects through modeling, analysis, and design of structures that meet rigorous safety and security criteria. Exposure to unique methods: Learn about blast-load considerations, progressive collapse mitigation, and advanced protective measures alongside experienced protective design specialists. Comprehensive mentorship: Receive guidance from engineers who are experts in both structural and protective design. Site and field exposure: Gain experience with construction administration, site visits, and interactions with multidisciplinary teams, clients, and partners. Team collaboration: Work in a collaborative environment where protective design intersects with structural, civil, and other engineering disciplines. Career development: Build a strong foundation in protective design that will set you apart as you enter the engineering profession. Qualifications A strong passion for pursuing a career in structural or protective design engineering, ideally with interest in resilience, safety, and security of structures. Currently enrolled in a Bachelor's program in Civil or Structural Engineering (junior level or higher, with at least three years of completed coursework) or a Master's program in structural engineering. Coursework or exposure to structural dynamics, steel design and/or concrete design is preferred. Excellent communication and teamwork skills. Strong time management and organizational abilities. Proficiency in Microsoft Excel and Word; experience with structural analysis software (ETABS, SAP2000, RISA, or LS-DYNA) is a plus. Physical Requirements Ability to work on a computer for extended periods of time. Comfort with conducting site visits and navigating construction sites, including climbing ladders and walking on uneven terrain. Ability to lift up to 15 pounds of equipment or materials. Additional Information How to Apply If you're excited to start your career with us, submit your application online, including a cover letter, resume, and your current unofficial transcripts. Please note that this internship requires you to be onsite and is not a remote position . Compensation KPFF is committed to recognizing the valuable contributions of our interns by offering compensation that reflects market standards and aligns with the local cost of living. This role offers a competitive hourly rate ranging from $30.00 to $34.00, based on experience and qualifications. In addition to hourly pay, interns at KPFF benefit from: Paid overtime opportunities when project needs require additional hours. Exposure to a wide variety of projects that add real value to your academic and professional development. Mentorship and training that are part of KPFF's investment in future engineers. Networking and career growth opportunities, including the potential for full-time employment after graduation. Our Culture At KPFF, interns are valued as key contributors to our success. We cultivate a collaborative, innovative, and supportive work environment that empowers individuals to take ownership of their projects. Interns at KPFF experience a dynamic workplace where autonomy and creativity are encouraged. Our team takes pride in mentoring interns and sharing professional insights to help shape the next generation of engineers. KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.

Our Culture DZYNE Technologies is leading the future of autonomous defense. Based in Irvine, California, we develop and manufacture advanced airborne and ground-based defense solutions deployed in over 50 countries. Backed by U.S. Government Programs of Record, our technologies are field-proven, scalable, and production-ready. We're growing fast and looking for innovators ready to make an impact. At DZYNE, you'll join a culture built on collaboration, integrity, and purpose. We celebrate wins, value diverse perspectives, and support every team member's success. Ready to do work that matters? Join us. Position: Senior Mechanical Engineer Location: Portland, OR on site Position Description: We are seeking a Mechanical Engineer with a strong background in product design and development to join our growing engineering team. The ideal candidate will have at least 7 years of experience in mechanical product design, with demonstrated success taking concepts from requirements definition through prototyping, testing, and production. This role offers the opportunity to directly impact the design and fielding of next-generation C-UAS products. Required Skills/Qualifications: Excellent written and oral communication skills Adaptable, eager to learn, and create, with a proactive attitude towards continuous improvement Ability to work in a small team to rapidly prototype and develop new products 7+ Related work experience design, analysis and testing in a manufacturing environment Experience with 3-D CAD tools such as SolidWorks and PDM tools Preferred Skills/Qualifications: Experience in aerospace, defense, or high-reliability industries. Knowledge of military/aerospace standards and ruggedized system design practices e.g. MIL-STD-810G. Hands-on experience with finite element analysis (FEA) or thermal analysis tools. Familiarity with additive manufacturing, injection molding, and lightweight structures. Demonstrated track record of taking products from concept to production. Education: Bachelor of science degree or above in Mechanical Engineering or related field Clearance Level Required: Clearance not required Travel: Up to 10% Working Conditions: The diversity of work conditions may range from an environment where there is little or no physical discomfort, such as a general office environment or warehouse. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must have the ability to stand, climb, occasionally lift a minimum of 25 lbs. Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine Involves movement between departments, floors, and worksites to facilitate work. May be performing physical activities including, but not limited to, heavy lifting and moving of items, climbing in and out of equipment, crawling, and working outdoors. Other Requirements: It is an essential requirement for the person in this role to have a legal right to work in the United States and be eligible to obtain any required Export Authorization and DoD Clearance. Salary: $130,000-$150,000 annually Salary depends on relevant work experience, education, training, essential skills, and/or other factors such as specialized or high-demand professions. In addition to the annual salary, the position will be eligible for an annual bonus. The pay range for this job level is a general guideline only and not a guarantee of salary or annual bonus. Benefits: Our benefits are DZYNE'ed for your overall health and financial wellness. DZYNE provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability insurances. DZYNE provides paid time off and paid holidays. Additionally, DZYNE offers a 401K plan with an employer match. DZYNE Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, disability, or protected veteran status. In addition to federal law requirements, DZYNE Technologies complies with applicable state and local laws governing nondiscrimination in employment in every location in which our company has facilities. This policy applies to all terms and conditions of employment.

Secondary Locations **Seattle** Job Code **18988** \# of openings **1** Apply Now (**************************************************** Requisition?org=POWERENGINEERS&cws=44&rid=18988) **This Opportunity -** **Distribution Engineering Intern - Summer 2026** Our POWER team is seeking a **Full Time Distribution Engineering Intern - Summer 2026** to work out of our **Portland, OR or Seattle, WA** office. This temporary position is seeking individuals currently enrolled in an Undergraduate or Graduate degree program. WSP USA hosts hundreds of internships across the United States to gain hands-on, meaningful work experience to enhance their education and professional aptitude. Our interns gain exposure to real projects while working side by side with senior staff. Through our Developing Professionals Network, interns gain mentorship, networking opportunities and lifelong career connections. This internship is anticipated to take place during the Summer 2026 semester. The program is anticipated to take place from May 18, 2026 through August 7, 2026. The individual start date is flexible. **Your Impact** + Support a variety of engineering tasks with the goal to develop technical, social, and ethical skills. + Learn basic principles of Distribution Design. + Work under the supervision of experienced engineers on utility distribution design projects + Assist senior engineers and designers with engineering consulting services for distribution design + Support creation of construction drawings, equipment sizing, and material specification for medium voltage systems + Collaborate on projects for a variety of electric utility clients, including co-ops, public utility districts, investor-owned utilities, and municipalities + Complete training on assigned tasks. + Exercise responsible and ethical decision-making regarding company funds, resources and conduct, and adhere to WSP's Code of Conduct and related policies and procedures. + Perform additional responsibilities as required by business needs. + Please note that there is no relocation or housing assistance associated with this internship. **Who You Are** **Required Qualifications** + Actively enrolled in an accredited Mechanical Engineering, electrical Engineering and Civil Engineering,or related, Undergraduate program with an anticipated graduation date of August 2026 or later. + Must be 18 or older. + Demonstrated interest in consulting engineering, electric utility industry, or related field, and have a strong desire to advance skills related to WSP's work and projects. + Competent interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to an engineering and non-engineering audience. + Capable of taking direction from leadership, mentors, and managers to executive projects. + Basic proficiency with technical writing, office automation, software, spreadsheets, technology, and tools. + Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies. + Authorization to work in the United States at the start of the internship. **Preferred Qualifications** + Prior internship and leadership involvement on campus. POWER Engineers, Member of WSP, is a global consulting environmental and engineering firm and one of the top design firms in the energy sector. Together, POWER and WSP's 73,900 experts create positive, long-lasting impacts for our communities and our clients in the power and energy, transportation and infrastructure, environmental, and property and buildings sectors. As part of our team, you'll discover a world of opportunities to connect with innovative thinkers, forge your path, and have fun tackling the world's most challenging projects. At POWER Engineers, Member of WSP, you can have a rewarding career on every level. Our philosophy is simple: Do Good. Have Fun. Build Success. We are a fun engineering firm. That might seem contradictory to some, but it works for us! POWER is an Equal Opportunity Employer, including women, minorities, veterans and individuals with disabilities. Compensation: Expected Pay (all locations): $19.13 - $30.00 Per hour WSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location. WSP USA reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant's sex or other status protected by local, state, and/or federal law. \#LI-GA1

We are looking for ambitious achievers to join our 2026 Kickstart Internship Program in Portland, Oregon! Your work will support project teams providing solutions for water resources, water quality, wastewater and water treatment, and recycled water planning and implementation issues that our water environment, transportation, and industrial sector clients are facing. You will have opportunities to get involved in significant projects throughout the United States. These projects may involve field work, technical report preparation and calculations, pre-construction conditions documentation, design plans and specifications. What we can offer you Meaningful Projects and Work Mentorship Professional Development Networking and Collaboration A Day in the Life of an Intern: Working on a variety of projects which allow you to apply skills and calculations that you have learned in school Managing ongoing projects and communicating with other team members and clients Attending and contributing to client meetings Visiting project sites Receiving mentorship and advising Networking with employees and clients Qualifications: Currently pursuing an undergraduate or graduate degree in: Civil Engineering Environmental Engineering Chemical Engineering Another related engineering field Completion of a minimum of sophomore (second-year) standing in an accredited engineering program Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. Pay rate for this position is anticipated to be $20 to $25 per hour, and may vary based upon education, experience, qualifications, skills, licensure/certifications, seniority, geographic location, and performance. Intern Benefits Summary: As a Kickstart intern, you'll enjoy the benefits package designed to support you during your experience. Choose between quality medical coverage or a $150 monthly stipend if you have other coverage, plus receive $15 per month toward your cell phone costs. You'll also have the opportunity to participate in our 401(k) plan and accrue paid sick time throughout the program, ensuring that your well-being and future are always a priority. #LI-hybrid

Job Description *Accepting applications through February - Century West will reach out in March* Century West Engineering, a premier Northwest civil engineering consulting firm, is looking for interns to join our team next summer. Candidates for our internship positions should be: Civil or Electrical Engineering majors currently enrolled in an undergraduate program at an accredited college or university Incoming juniors or seniors with preference given to seniors Future engineers who want to make a difference in their communities through public works projects Students with AutoCAD Civil3D experience or willingness to learn Our goals for our interns are to help them gain work-ready CAD skills and introduce them to construction observation and fieldwork. Interns will also develop a strong understanding of: The work Century West does and our company values What public works consulting is and how it differs from working for an agency or private development firm The lifecycle of public works projects Depending on the intern's interests and choice of host office, internships may focus on municipal transportation and utilities projects, aviation projects, or a mix of both. Offices that will host interns in 2026 and the areas of practice available locally include: Portland, OR - municipal and aviation Bend, OR - municipal and aviation Spokane, WA - municipal and aviation Federal Way, WA - aviation Bothell, WA - aviation Sandpoint, ID - municipal Coeur d'Alene, ID - municipal Highlights of our internship program include: A 10-week program running with two start dates: June 1 or June 22 Peer mentorship with current engineer-in-training 6-week professional development presentation series A customized experience to fit each intern's needs Pay Scale: $25 per hour To Apply: Please apply through Century West's ADP portal An Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected status.

Harris Group thrives on providing expert engineering for some of today's most complex challenges. We are creative in our approach by delivering multi-discipline services across a wide range of project types. Our successes are directly related to high-quality collaboration, across all offices, expertise, and backgrounds. Harris Group is a 100% Employee-Owned company with our eyes focused on the people in the company, the clients we serve, and the communities in which we live. Harris Group is looking for a Senior Mechanical Engineer to be based in our Portland, OR office. This role is responsible for providing professional engineering expertise to our projects that seek to positively impact both the community and the environment. The incumbent will work on innovative designs and see diverse projects through development, detailed design, commissioning, and construction support. What We Can Offer You * Variety of project types: Life Science, Industrial Manufacturing, Biofuels, Chemical Plants, Institutional, and Commercial Facilities * Work on multi-disciplinary teams, collaborating with engineers and architects from all engineering disciplines. * Ownership in Harris Group with line of sight to yours and overall company successes. * Career growth with opportunities to lead teams * Training & Education Assistance to support your career goals. * Flexible Work: Hybrid opportunities * A passionate team and collaborative environment focused on excellence in delivery. The Role This Senior Mechanical Engineer will work primarily on projects within industrial manufacturing, life sciences (biopharmaceutical), pulp and paper, and fuel terminal piping and tanks. Additional projects may include work within process industries, air and sea ports, energy, commercial development, and other business sectors. The ideal candidate will be entrepreneurial and self-motivated, passionate of the Mechanical discipline, and communicative with team members and clients. At Harris Group, you are an owner via our Employee Stock Ownership Program (ESOP) and have an opportunity to be a shareholder in the company based on embracing our values: * Think Like an Owner * Seek Shared Success * Doing the Right Thing * Embrace Hard Work * Pursuing Continuous Improvement * Designing Sustainably The Responsibilities * Serve as a technical resource on complex designs and advance engineering theories, concepts, principles, and processes. * Perform mechanical design, working with other members of the mechanical staff, and coordinate with other disciplines on specific projects. * Prepare design calculations and documentation that support the project design basis. * Prepare mechanical drawings, through the use of designers or drafters, and develop specifications. * Coordinate design with vendor supplied equipment. * Prepare equipment layouts and general arrangements. * Prepare construction bid packages and construction specifications. * Assist in preparation and presentation of proposals, including scope of services and fee estimate. * Support sectors with business development activities and proposal input. The Requirements Bachelor's degree in Mechanical Engineering and a minimum of 7 years of relevant experience. * Registration as a Professional Engineer (PE) is required. * Working knowledge of facility/building mechanical systems including HVAC and plumbing. * Familiarity with process system design and equipment including pumps, fans, heat exchangers, cooling towers, boilers, chillers, conveyors, and air handlers is also important. * Ability to identify, interpret and apply relevant codes and standards to engineering designs. * Ability to develop and maintain relationships with prospective clients, vendors, and constructors. * Proficient with MSOffice suite. * Experience with AutoCAD, CADWorx, or Revit, a plus. * Knowledge of Caesar (preferred) or Autopipe pipe stress software, desired. * Knowledge of PIPE-FLO preferred. * Ability and willingness to travel to an off-site location and/or accept client site assignments when required. Benefits * Salary Range: $120,000-$150,000/year depending on location, education, experience, and any certifications that are directly related to the position. * Benefits include health, dental, and vision insurance, life insurance, 401K retirement savings plan (with company matching), PTO & paid holidays. * Harris Group is proud to be an employee-owned company; the ESOP (Employee Stock Ownership Plan) provides an exciting employee wealth building opportunities of our employees. Equal Opportunity Employer Harris Group provides a competitive compensation and benefits package and is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, ethnicity, religion, age, sex, sexual orientation, gender identity, disability, protected veteran status, or any other characteristic protected by federal, state or local laws. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Drug Free Workplace Harris Group, Inc. is a 100% drug free workplace. For the safety of our employees, customers, and our customer's facilities, we do a pre-employment drug test and may require random testing to meet specific client needs. Please note that Marijuana, even if prescribed by a physician OR allowed under a state law regulating Marijuana, remains illegal under federal law and is against Harris Group's policy. We look forward to receiving your resume!

Job Details Senior Columbia Machine Inc - Vancouver, WA Hybrid Full Time $100700.00 - $132500.00 Salary Day EngineeringDescription Senior Mechanical Engineer - Stretch Wrapping Systems Summary Highly experienced and technically proficient Senior Mechanical Engineer to lead the design, development, and optimization of mechanical systems, with a specialized focus on stretch wrapping technologies. This role combines advanced technical leadership with product line ownership in a fast-paced capital equipment environment. The ideal candidate will have deep expertise in prestretch and post-stretch film mechanics, along with comprehensive experience designing complex automation and packaging machinery. This role requires cross-functional collaboration with product management, controls engineering, manufacturing, and field service teams. You will drive innovation in load containment, reduce consumable costs, enhance reliability, and support the successful commercialization of advanced wrapping systems. Essential Duties and Responsibilities Stretch Wrapping System Expertise Lead the design and optimization of stretch wrapper mechanical systems including film carriage mechanics, prestretch gear ratios, and post-stretch tensioning. Serve as company expert on prestretch and post-stretch film technologies (film memory, film force, feed control). Configure roller systems and drive mechanisms for optimal prestretch ratios and consistent film performance. Collaborate with controls engineers to optimize feedback systems (e.g., dancer arms, analog sensors) and maintain consistent film stretch across various load types. Design load-specific wrapping profiles (e.g., fragile, lightweight goods) to maximize containment and minimize film waste. Mechanical Engineering and Design Lead full-cycle mechanical design of large and small assemblies using Autodesk Inventor and/or PTC CREO. Develop complete machine assemblies from concept, including hydraulic and pneumatic subsystems. Generate and manage Bills of Materials (BOMs), part numbers, and PDM structure. Integrate new vendor components and systems into product designs. Estimate costs and timelines for engineering projects and support Application Engineering with custom system proposals. Project Leadership and Support Own and manage a CPD equipment product line and support aftermarket part sales, conversions, and retrofits as full engineering projects. Mentor junior engineers and field technicians in film mechanics, diagnostics, and mechanical system design. Support field service teams with troubleshooting and resolve mechanical and system integration challenges. Travel up to 20% to support customer sites, field testing, and product launches. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Knowledge, Skills and/or Abilities Software Autodesk Inventor (2016-2018) & PTC CREO AutoCAD 2D Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) PDM (e.g., InforM3) and manufacturing software systems Knowledge Knowledge of materials, mechanical components, and their applications Knowledge of film force, film memory, prestretch and post-stretch systems, and film feed control Strong understanding of prestretch mechanisms including gearing, roller dynamics, and mechanical elongation Knowledge of high-reliability, repetitive-motion packaging equipment Hydraulic power and motion systems and the application of hydraulic components: Valves, Motors, Cylinders; Understanding of hydraulic circuits and schematics Pneumatic power and motion systems and the application of pneumatic components: Valves, Motors, Cylinders; Understanding of pneumatic circuits and schematics Mechanical / Electric drives: Design of linear and rotary drive trains for specific applications; Understanding of mechanical elongation and tensioning systems Knowledge of electromechanical film force systems (e.g., torque modulation, motor-driven carriage systems) Integration of mechanical systems into automated packaging and palletizing lines Machine Safety and Industrial Safety Practices: Machine Guarding, Risk Assessments, Safety aspects of wrapping and palletizing systems Divisional Product Knowledge: Principal engineer for one or more models of palletizers or wrapping systems; Good understanding of palletized product handling, pallet dynamics, and stretch wrapping applications; Ability to support Applications and Sales with engineering estimates and cost evaluations Skills Analytical thinking and mechanical troubleshooting Project/Process Management Computer/Technical proficiency Written and oral communication FEA (Finite Element Analysis) preferred Abilities Ability to perform mechanics of solids, stress/strain calculations Ability to complete both manual and software-assisted engineering calculations Ability to estimate engineering project hours, scope, and timelines Ability to evaluate and understand cost accounting for applications and proposals Ability to lead and mentor within a team environment Education and/or Experience Bachelor's degree in Mechanical Engineering or equivalent work experience P.E. (Professional Engineer license) preferred 10 or more years of relevant engineering experience in capital equipment, packaging, or automation systems Minimum 7 years of hands-on experience specifically related to stretch wrapping systems and film mechanics Experience with PDM and manufacturing software systems preferred Qualifications Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Knowledge, Skills and/or Abilities Software Autodesk Inventor (2016-2018) & PTC CREO AutoCAD 2D Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) PDM (e.g., InforM3) and manufacturing software systems Knowledge Knowledge of materials, mechanical components, and their applications Knowledge of film force, film memory, prestretch and post-stretch systems, and film feed control Strong understanding of prestretch mechanisms including gearing, roller dynamics, and mechanical elongation Knowledge of high-reliability, repetitive-motion packaging equipment Hydraulic power and motion systems and the application of hydraulic components: Valves, Motors, Cylinders; Understanding of hydraulic circuits and schematics Pneumatic power and motion systems and the application of pneumatic components: Valves, Motors, Cylinders; Understanding of pneumatic circuits and schematics Mechanical / Electric drives: Design of linear and rotary drive trains for specific applications; Understanding of mechanical elongation and tensioning systems Knowledge of electromechanical film force systems (e.g., torque modulation, motor-driven carriage systems) Integration of mechanical systems into automated packaging and palletizing lines Machine Safety and Industrial Safety Practices: Machine Guarding, Risk Assessments, Safety aspects of wrapping and palletizing systems Divisional Product Knowledge: Principal engineer for one or more models of palletizers or wrapping systems; Good understanding of palletized product handling, pallet dynamics, and stretch wrapping applications; Ability to support Applications and Sales with engineering estimates and cost evaluations Skills Analytical thinking and mechanical troubleshooting Project/Process Management Computer/Technical proficiency Written and oral communication FEA (Finite Element Analysis) preferred Abilities Ability to perform mechanics of solids, stress/strain calculations Ability to complete both manual and software-assisted engineering calculations Ability to estimate engineering project hours, scope, and timelines Ability to evaluate and understand cost accounting for applications and proposals Ability to lead and mentor within a team environment Education and/or Experience Bachelor's degree in Mechanical Engineering or equivalent work experience P.E. (Professional Engineer license) preferred 10 or more years of relevant engineering experience in capital equipment, packaging, or automation systems Minimum 7 years of hands-on experience specifically related to stretch wrapping systems and film mechanics Experience with PDM and manufacturing software systems preferred