Operator jobs in Cayce, SC

NORMAL DUTIES include the following. Not all tasks are performed on all sections due to automation on some equipment. · Complete paperwork as required. · Responsible for quality and machine speed.(caliper, etc, bonding, scoring, size) · Responsible for coater operation - including pumps, coolers, filters · Responsible for impregnator and its operation · Prepare coater/impregnator for runs · Ensure there is sufficient coating for the day's runs, as well as ensure management is aware of low inventory of totes. · Daily, weekly, monthly cleaning of machines at wet end. · Ensuring machine is running at the appropriate speeds required. · Housekeeping of coater/impregnator and its associated areas. · Monitoring coater for proper settings and quality of board produced · Must be able to operate a) singlefacers/doublebacker, b) roll stands, and c) splicers. · Must be able to: a) control coating waste, b) control paper waste, c) trouble-shoot quality problems, and d) maintain proper setting on coater. · Must maintain a high level of housekeeping on, in and around the coater. Must not be afraid of heights, machine has two levels · Report any maintenance problems as required. The Operator will also perform any other duties as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must have demonstrated the ability to perform each normal duty satisfactory in this and all lower classifications in this line of progression. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions.

Long Term Maintenance No Per Diem Mon - Thursday 10 hour days SUMMARY Operates various power-driven machinery used to move dirt or other materials. May operate all or some of the follow types of equipment: backhoe, bulldozer, crane, dragline, font-end loader, motor grader, cherry picker, dump truck, etc. RESPONSIBILITIES - Sets up and operates production equipment in accordance with established guidelines and procedures. - Adjust machine settings to complete tasks according to specification, accurately and in a timely manner. - Move hand and foot levers to control diesel, electric, gasoline or steam-powered operating equipment. - Interprets hand signals to determine where materials are to be placed. - May be required to manipulate equipment on unlevel working surface. - May assist in lifting, position and securing or materials and work pieces during installation. - May be responsible for routine maintenance or repairs. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. Brown and Root Industrial Services also offers the following: * Opportunities for advancement. * Potential career growth into NCCER certified craft program with additional benefits of increase wages * Paid holidays and vacation * Elective medical, dental, vision, and supplemental benefits are available * Supplemental medical premium contributions for qualified positions. * Immediate 401(k) program with the employer matching the employee's first 3% contribution, and 50% of the employee's next 2% (vested immediately) * Employee Quarterly incentive bonus program Work Schedule is Monday-Thursday 4 10 hour days Shift Only JOB REQUIREMENTS - Observes load hook up and determines safety of load. - Manipulates crane control to regulate speed and direction of crane and hoist movement according to written, verbal or signal instructions. - Cleans and maintains crane and hoisting mechanism. - Inspects crane for defective parts, documents and notifies the supervisor of the defects or malfunctions. - Loads, transports, and unloads materials, tools, equipment and supplies. - Performs minor maintenance or cleaning activities on tools and equipment. - May be required to interpret load charts. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 5% Walking 5% Sitting 90% b. Lifting 10 lb. Carrying 10 lb. Pushing 50 ft-lb. Pulling 50 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

GENERAL SUMMARY: Coordinates activities of workers engaged in setting up and operating arc welding machine that seam-welds rolled plate to form large diameter spiral fabricated pipe by performing the following duties. MINIMUM QUALIFICATIONS: To perform the job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: include the following: (Other duties may be assigned, including but not limited to cross training and housekeeping. Responsibilities also include attention to safety according to all safety rules.) In addition to the duties of cutoff, tracker and floor: In conjunction with department team leader, reviews daily work schedule and specification sheets for current material and process requirements; directs and assists crew members with setup for daily runs. Ensures mill machine is kept running by observing and correcting problems that arise. Monitors quality of alignment and weld process. Monitors and resolves employee issues; conducts and/or recommends employee discipline if required. Performs preventive maintenance and minor repairs to mill machinery and equipment. Refers electrical and hydraulic problems to maintenance department for resolution. Develops, recommends, and implements measures to improve production methods, equipment performance, and quality of product. Brings safety issues to the attention of department manager or safety manager. Loads coils onto the back of machine. Verifies that all positions have been checked and ready to start. Performs other tasks as instructed by supervision. PHYSICAL/ENVIRONMENTAL REQUIREMENTS: While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, reach with hands and arms and climb or balance. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to extreme heat. The noise level in the work environment is usually loud.

We are hiring for Well Experienced GPS Heavy Equipment Operator ( Bulldozer, Excavators, Backhoes and more). This is not a FORKLIFT POSITION. You must take the operation test first before hiring.You must be hard-working, reliable, and willing to perform various tasks that are required on the work site. Operators are instrumental to the company's success. Safety, efficiency and pride are key attributes of an excellent operator. All operators are required to be safe and be responsible for their assigned equipment.( Temp-to Hire Position) Pay Rate: $18.00hr to $28.00hr (Depending On Experience) Per Diem of $105.00 Per Day Worked (If Greater Then 70miles From Work Site) Working Hours: Monday Through Friday Variable Start Times (Depending on Job) Responsibilities: Operate all heavy equipment in a safe and efficient way according to all relevant legislation, policies, and procedures. Perform daily safety and maintenance checks Clean heavy equipment as scheduled and/or required. Ensure heavy equipment is safely and securely stored. Participate in route maintenance to include but not limited to greasing/fueling equipment daily. Practice workplace safety. General daily preventative equipment maintenance. Light labor work as needed. Other duties as assigned. Qualifications: Equipment operation and maintenance. Equipment safety. General site preparation techniques and procedures. Knowledge of operation of front end loaders, dozers, graders, compactors, and other pieces of heavy equipment. Knowledge of equipment maintenance and storage. Knowledge of workplace safety requirements and procedures. Knowledge of equipment cleaning standards and procedures. Client service and public interaction skills. Analytical and problem solving skills. Decision making skills. Effective verbal and listening communication skills. Ability to read and write to record and maintain daily records. Time management skills. Work Conditions and Physical Capabilities: Physically strenuous and mentally demanding job. Lifting, pulling, and managing heavy equipment and objects, from time to time. Work in all weather.

Responsible for operating a variety of light and heavy equipment to support facility and grounds maintenance. Loads and unloads heavy equipment from vehicles used to transport it. Inspects the vehicles and are in standard with Department of Transportation regulations. This position reports to the Maintenance Supervisor. ESSENTIAL JOB FUNCTIONS: Operates a variety of light and heavy equipment to support the facilities and grounds of the CCAA in a safe and efficient way. Operates a concrete cutting saw, Bobcat forestry cutter, bush hog, backhoe, John Deere zero turn mower and front deck mower, forklifts and hand trucks, dump truck and flatbed trucks, excavators, and other equipment as necessary to complete essential functions; and performs preventative maintenance on equipment to ensure safe operations and long-life cycle of equipment. Transports equipment and other supplies (tables and chairs for event planning); operates pressure washer equipment and maintains parking decks and other surfaces; cuts and fills asphalt holes on site; prepares storm water reports and observes any pollution issues that may harm storm water and completes storm water reports, and escorts others to the appropriate on-site locations. Requirements MINIMUM REQUIREMENTS TO PERFORM WORK: High school diploma or equivalent. One (1) years' experience in a related field of work. Or equivalent training, education, and/or experience. Specific License or Certification Required: Valid South Carolina driver's license. PHYSICAL DEMANDS: Tasks require the ability to exert light physical effort in sedentary to light work, but which may involve some lifting, carrying, pushing and/or pulling of objects and materials of light weight (5-10 pounds). Tasks may involve extended periods of time at a keyboard or workstation. WORK ENVIRONMENT: Essential functions are regularly performed without exposure to adverse environmental conditions. Salary Description Starting at $22.08/hr

Full-time Description Operators are instrumental to the company's success. Safety, efficiency and pride are key attributes of an excellent operator. All operators are required to be safe and be responsible for their assigned equipment. We are 100% SC Certified Drug Free Workplace RESPONSIBILITIES To operate equipment safely, and efficiently while adhering to all company policies and MSHA/OSHA regulations, while meeting all production goals. · Operate all heavy equipment in a safe and efficient way according to all relevant legislation, policies and procedures · Perform daily safety and maintenance checks · Clean heavy equipment as scheduled and/or required · Ensure heavy equipment is safely and securely stored · Participate in routine maintenance to include but not limited to greasing and fueling equipment daily · Practice workplace safety · General daily preventative equipment maintenance · Light labor work as needed Heavy Equipment can be defined as: · Excavator (GPS Experience) · Haul truck (rigid frame / articulated) · Bulldozer (GPS Experience) · Motor grader · Roller · Water truck · Backhoe · Farm tractor KNOWLEDGE, SKILLS, PERSONAL ATTRIBUTES AND REQUIREMENTS Knowledge · Equipment operation and maintenance · Equipment safety · General site preparation techniques and procedures · Knowledge of operation of front end loaders, dozers, graders, compactors, and other pieces of heavy equipment · Knowledge of equipment maintenance and storage · Knowledge of workplace safety requirements and procedures · Knowledge of equipment cleaning standards and procedures Skills: · Ability to operate all types of equipment according to the manufacturers recommendations · Ability to operate required equipment in a safe and responsible manner · Client service and public interaction skills · Team building · Analytical and problem solving skills · Decision making skills · Effective verbal and listening communications skills · Ability to communicate effectively in English · Ability to read and write to record pickups and maintain daily records · Stress management skills · Time management skills Personal Attributes: · Be honest, trustworthy and respectful · Possess cultural awareness and sensitivity · Be flexible · Demonstrate sound work ethics · Deal with the public in a positive, courteous and respectful manner Requirements: · Must have a valid driver's license with less than (3) moving violations in (3) years · Must be able to pass drug / alcohol screenings · Must be able to lift at least 40 lbs. · Must be able to pass a Physical WORKING CONDITIONS Physical Demands: The Heavy Equipment Operator has a physically strenuous and mentally demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The Heavy Equipment Operator will have to work in all weather, and must be prepared for both extreme heat and cold. The Heavy Equipment Operator must ensure that all activities are completed in a safe and efficient way. Environmental Conditions: The Heavy Equipment Operator must work outside in all different weather conditions including extreme cold and extreme heat. He/she may at times be exposed to dangerous and/or toxic substances and must take necessary precautions to protect eyes, nose and skin from irritation and infection. Sensory Demands: He/she may at times be exposed to dangerous and/or toxic substances and must take necessary precautions to protect eyes, nose and skin from irritation and infection. Mental Demands: The Heavy Equipment Operator must work both independently and with the team and is expected to maintain a schedule of work. Any problems or inconveniences may result in increased stress to complete tasks in a limited time.

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customer's needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.).Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: * HS diploma or GED preferred. * At least two years of work experience, preferably in an outdoor environment. * One year of loader or forklift experience, certification preferred. * Excellent customer service attitude and skills. * Excellent communication skills, written and verbal. * Positive attitude/High Integrity. * Ability to operate heavy equipment. * Must be able to multi-task in a fast-paced environment. * Strong attention to detail. * Occasional O.T. as needed. * Bilingual skills a plus. Pay: $18.00 - $20.29/ Hour. Benefits Summary: * Medical/Dental/Vision * 401k plus a company match * ESPP - Employee Stock Purchase Plan * EAP - Employee Assistance Program (no cost to you) * Vacation & Sick pay * Paid Company Holidays * Life and AD&D Insurance * Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: * E-verify Participation * Right to Work

The Loader Operator I is responsible for operating heavy equipment and trucks, setting up equipment for auction in yards and helping customers during and after auctions. Responsibilities Responsible for operating all types of heavy equipment and trucks. Accountable for helping to set up equipment in the yard for auctions. Help customers load their equipment purchases, and answer their questions related to the yard. Actively support the RB Unreserved Commitment to Safety: to send everyone home, every day, the way they came to work, by taking personal responsibility for your safety and safety of your team, co-workers and customers. Perform other duties as assigned. Qualifications Experience operating heavy machinery. Able to operate a large 36,000 lbs forklift is an asset. Good spoken and written English is required. Good computer skills and able to learn new programs quickly. A track-record of working safely, and helping others work safely, too. You must be able to relate well with customers and team members. You like to work in a team, helping out wherever needed; but you can also self-start and work on your own. Organized, and can handle lots of multiple tasks at once. A high level of attention to detail.

Turner Staffing Group - Heavy Equipment Operator Do you love mining? Do you think differently? Are you ready to define the future of this industry? We've been waiting for you! Turner Staffing Group is committed to changing the way mining companies do business. We develop our people. We partner with our clients. We believe in win, win, win. We are looking for a dynamic and talented mining Heavy Equipment Operators for our fast-growing, forward thinking mining client in Columbia, SC. Turner Staffing Group is seeking an energetic mining professionals who can leverage their mining knowledge to expand upon our fast-growing business, creating best practices for equipment operations to ensure profitable operations. You You want to work for a company that is rapidly changing the way the largest materials producers do business. You are motivated by solving problems and partnering with our clients and suppliers. You want to work with great people and enjoy being a part of a strong team. You are a knowledgeable Operator who is not afraid to jump into every detail. You want to be in a place where continuous learning and growth is the norm. You are adaptable and able to juggle multiple initiatives concurrently. Responsibilities: Operating heavy equipment including loaders, skid steers, and other pieces of heavy equipment in a production environment Performing all pre-shift inspections, some basic maintenance and upkeep Working with teammates on crew to maximize production while always maintaining our safety rules and regulations. Requirements: Safety oriented, awareness of everyone and everything that is around you Strong work ethic Willingness to learn Ability to be flexible and to adapt Experience with heavy equipment Preferred to have MSHA training

Job Description We are seeking a skilled and safety-conscious Heavy Equipment Operator to join our team. The ideal candidate will be responsible for operating a variety of heavy machinery used in construction, excavation, and site development projects. This role requires precision, attention to detail, and a strong commitment to safety and efficiency. Duties/Responsibilities: Operate heavy equipment such as dozers, excavators, loaders, haul trucks, scrapers and rollers. Perform daily inspections and maintenance of equipment to ensure optimal performance. Monitor and report equipment malfunctions or safety hazards. Follow site plans and instructions from site supervisors to complete tasks accurately and on schedule. Ensure compliance with quality and environmental regulations. Safely load and unload materials and equipment. Collaborate with site supervisors and other team members to ensure smooth operations. Ability to lift a minimum of 50 pounds. Comply with all company policies and procedures. Essential Requirements: Must be willing and able to travel out of town, and/or out of state to work on job sites. Must have reliable transportation. Align with our company core values of Better Every Day, Mindful in Everything, Humble Hearts/Open Hands and Everyone Matters. Must have good work ethics: Be on time, work hard and willing to learn. Must be able to pay high degree of attention to safety and promote a safe work environment. Possesses keen observation skills; pays attention to and remembers work related instructions, demonstrations, and procedures. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to prioritize tasks. Preferred Qualifications: Experience with GPS or automated control systems on equipment. Ability to read and interpret blueprints, maps, and site plans. Benefits Competitive Salary - Paid Weekly Medical Health Insurance Benefits after 30 days Vision & Dental Insurance Life Insurance Programs 401k after 6 months of service plus company match Corporate Giving Match Vacation/Paid Time Off after 120-day probationary period Equal Opportunity Employer Powered by JazzHR tix5AXYj4s

Heavy Equipment Operator - Haul Truck - 2500030N Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Promote Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Operate Heavy Equipment. Safely operate off-highway equipment to transport raw materials and/or finished products throughout the facility safely and efficiently. Inspect Equipment. Perform thorough pre-trip and post-trip inspections and accurately complete daily mobile equipment reports and other relevant documentation. Maintain Equipment. Maintain equipment performance by checking vehicle fluid levels and adding correct fluids as necessary and assisting in performing other minor maintenance. Monitor Processes, Materials, or Surroundings. Monitor the plant and operations and report any necessary maintenance or adjustments that may be required to ensure safety. Qualifications Skills You'll Need: Experience. Previous experience operating heavy construction equipment is preferred. Knowledge of Best Practices. Knowledge of general principles and practices of operating and servicing heavy construction equipment is preferred. Flexibility. Must be willing to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. The industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is that our work impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. Job: Heavy Equipment Driver/Operator Primary Location: South Carolina-Columbia Organization: GM - SC Schedule: Full-time Job Posting: Dec 2, 2025, 8:40:35 PM

For description, visit PDF: ************ sumtersc. gov/sites/default/files/uploads/Departments/HumanResources/Jobs/heavy_equipment_operator_i-sanitation. pdf

RESPONSIBILITIES: The Operator is responsible for the operation of the baler machine. This includes safety, control of waste, all reports and or data collection, and effective operation of the machine. All individuals assigned to the machine are to work together in a safe, efficient and effective manner to insure the production of a quality product. To achieve this level of operations all employees are required to comply with all applicable Plant and OSHA safety rules. NORMAL DUTIES include the following. Hog all waste taken to the Hogger to include peel waste, butt waste, and sheet waste excluding sheets that can be used as dunnage. Weigh bales, documents weights and collects tickets for bales and turns the tickets into Supervisor at the end of shift. Retrieves waste from machines when there is none at the Hogger. Keep Hogger and baler area clean. Inform Supervisor when supplies are low, i.e. baling wire, tickets, etc. Any other duties as assigned by any member of management. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must have demonstrated the ability to perform each normal duty satisfactory in this classification and all lower classifications in this line of progression. Also, the ability to learn to perform the normal duties in the next classification in this line of progression. The requirements listed below are representative of the knowledge, skill, and/or ability required. LICENSE: Employee must have successfully completed the appropriate training programs for the operation of powered industrial trucks. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively with peers and management. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and Metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an individual to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. An individual is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions.

Job Description GENERAL SUMMARY: Coordinates activities of workers engaged in setting up and operating arc welding machine that seam-welds rolled plate to form large diameter spiral fabricated pipe by performing the following duties. MINIMUM QUALIFICATIONS: To perform the job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: include the following: (Other duties may be assigned, including but not limited to cross training and housekeeping. Responsibilities also include attention to safety according to all safety rules.) In addition to the duties of cutoff, tracker and floor: In conjunction with department team leader, reviews daily work schedule and specification sheets for current material and process requirements; directs and assists crew members with setup for daily runs. Ensures mill machine is kept running by observing and correcting problems that arise. Monitors quality of alignment and weld process. Monitors and resolves employee issues; conducts and/or recommends employee discipline if required. Performs preventive maintenance and minor repairs to mill machinery and equipment. Refers electrical and hydraulic problems to maintenance department for resolution. Develops, recommends, and implements measures to improve production methods, equipment performance, and quality of product. Brings safety issues to the attention of department manager or safety manager. Loads coils onto the back of machine. Verifies that all positions have been checked and ready to start. Performs other tasks as instructed by supervision. PHYSICAL/ENVIRONMENTAL REQUIREMENTS: While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, reach with hands and arms and climb or balance. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to extreme heat. The noise level in the work environment is usually loud.

Job DescriptionDescription: Operators are instrumental to the company's success. Safety, efficiency and pride are key attributes of an excellent operator. All operators are required to be safe and be responsible for their assigned equipment. We are 100% SC Certified Drug Free Workplace RESPONSIBILITIES To operate equipment safely, and efficiently while adhering to all company policies and MSHA/OSHA regulations, while meeting all production goals. · Operate all heavy equipment in a safe and efficient way according to all relevant legislation, policies and procedures · Perform daily safety and maintenance checks · Clean heavy equipment as scheduled and/or required · Ensure heavy equipment is safely and securely stored · Participate in routine maintenance to include but not limited to greasing and fueling equipment daily · Practice workplace safety · General daily preventative equipment maintenance · Light labor work as needed Heavy Equipment can be defined as: · Excavator (GPS Experience) · Haul truck (rigid frame / articulated) · Bulldozer (GPS Experience) · Motor grader · Roller · Water truck · Backhoe · Farm tractor KNOWLEDGE, SKILLS, PERSONAL ATTRIBUTES AND REQUIREMENTS Knowledge · Equipment operation and maintenance · Equipment safety · General site preparation techniques and procedures · Knowledge of operation of front end loaders, dozers, graders, compactors, and other pieces of heavy equipment · Knowledge of equipment maintenance and storage · Knowledge of workplace safety requirements and procedures · Knowledge of equipment cleaning standards and procedures Skills: · Ability to operate all types of equipment according to the manufacturers recommendations · Ability to operate required equipment in a safe and responsible manner · Client service and public interaction skills · Team building · Analytical and problem solving skills · Decision making skills · Effective verbal and listening communications skills · Ability to communicate effectively in English · Ability to read and write to record pickups and maintain daily records · Stress management skills · Time management skills Personal Attributes: · Be honest, trustworthy and respectful · Possess cultural awareness and sensitivity · Be flexible · Demonstrate sound work ethics · Deal with the public in a positive, courteous and respectful manner Requirements: · Must have a valid driver's license with less than (3) moving violations in (3) years · Must be able to pass drug / alcohol screenings · Must be able to lift at least 40 lbs. · Must be able to pass a Physical WORKING CONDITIONS Physical Demands: The Heavy Equipment Operator has a physically strenuous and mentally demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The Heavy Equipment Operator will have to work in all weather, and must be prepared for both extreme heat and cold. The Heavy Equipment Operator must ensure that all activities are completed in a safe and efficient way. Environmental Conditions: The Heavy Equipment Operator must work outside in all different weather conditions including extreme cold and extreme heat. He/she may at times be exposed to dangerous and/or toxic substances and must take necessary precautions to protect eyes, nose and skin from irritation and infection. Sensory Demands: He/she may at times be exposed to dangerous and/or toxic substances and must take necessary precautions to protect eyes, nose and skin from irritation and infection. Mental Demands: The Heavy Equipment Operator must work both independently and with the team and is expected to maintain a schedule of work. Any problems or inconveniences may result in increased stress to complete tasks in a limited time. Requirements:

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customer's needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.).Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: HS diploma or GED preferred. At least two years of work experience, preferably in an outdoor environment. One year of loader or forklift experience, certification preferred. Excellent customer service attitude and skills. Excellent communication skills, written and verbal. Positive attitude/High Integrity. Ability to operate heavy equipment. Must be able to multi-task in a fast-paced environment. Strong attention to detail. Occasional O.T. as needed. Bilingual skills a plus. Pay: $18.00 - $20.29/ Hour. Benefits Summary: · Medical/Dental/Vision · 401k plus a company match · ESPP - Employee Stock Purchase Plan · EAP - Employee Assistance Program (no cost to you) · Vacation & Sick pay · Paid Company Holidays · Life and AD&D Insurance · Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

For description, visit PDF: ************ sumtersc. gov/sites/default/files/uploads/Departments/HumanResources/Jobs/automated_heavy_equipment_operator-sanitation. pdf

Job Title: Heavy Equipment Operator Company: Turner Staffing Group Position Type: Full-Time About Us: Turner Staffing Group, in collaboration with our esteemed mining partner in Kershaw, South Carolina, is actively seeking experienced Heavy Equipment Operators to join our dynamic team. As a leading force in the mining industry, we are dedicated to fostering a culture of excellence, safety, and innovation. Job Overview: We are looking for skilled and safety-conscious Heavy Equipment Operators to contribute to the success of our mining operations. The ideal candidates will have hands-on experience operating a variety of heavy equipment, ensuring the efficient and safe extraction of minerals from the site. Responsibilities: Equipment Operation: Safely operate heavy equipment, including but not limited to bulldozers, excavators, loaders, and haul trucks. Execute tasks such as grading, digging, loading, and transporting materials as per project requirements. Safety Compliance: Adhere to all safety protocols and guidelines to ensure a secure work environment. Conduct routine equipment inspections and report any issues promptly. Efficiency and Productivity: Work collaboratively with the mining team to optimize workflow and maximize production efficiency. Meet project deadlines and production targets while maintaining high-quality standards. Communication: Effectively communicate with supervisors, colleagues, and other team members to ensure seamless project coordination. Report any operational challenges or concerns in a timely manner. Maintenance Support: Collaborate with the maintenance team to facilitate regular equipment maintenance and repairs. Assist in troubleshooting equipment issues and participate in scheduled maintenance activities. Requirements: Proven experience as a Heavy Equipment Operator in a mining or similar industry. Familiarity with safety regulations and commitment to safe work practices. Ability to operate various heavy equipment efficiently and skillfully. Strong communication and teamwork skills. Education and Certifications: High school diploma or equivalent. Relevant certifications for heavy equipment operation. MSHA experience preferred. Benefits: Competitive salary Health, dental, and vision insurance Retirement savings plan

Is AMERICAN the right fit for you? AMERICAN SpiralWeld Pipe Company is hiring Heavy Equipment Operators at our East Coast Operation in Columbia, SC. At AMERICAN, we believe in doing things THE RIGHT WAY. That's why our employees earn competitive pay, receive excellent benefits and have opportunities to grow. All this while making products the world needs. As a Heavy Equipment Operator at our manufacturing and fabrication facility, you will be operating industrial lift equipment-primarily heavy-duty forklifts-handling loads up to 65,000 pounds. Safety, precision, and teamwork are essential. Our Operators use heavy-duty forklifts (65,000-lb, 55,000-lb, and 36,000-lb capacity) and other material-handling equipment to safely move, load, unload, and stage extremely heavy pipe, steel, and fabricated components. Additionally, our Heavy Equipment Operators ensure compliance with safety procedures, maintain equipment, and support production schedules across the plant. Key Responsibilities include: Safely operate heavy-capacity forklifts (up to 65,000 lb rating) and related material-handling equipment. Load/unload trucks, move materials to/from racks, staging areas, and production lines. Perform pre-shift and post-shift equipment inspections; report and tag defects. Secure loads using approved rigging and blocking methods; verify load stability and weight limits. Follow all safety protocols, lockout/tagout, and PPE requirements. Coordinate with crane operators, riggers, and production teams for safe material movement. Maintain accurate load, movement, and shift logs as required. Assist with yard organization, inventory movement, and housekeeping of work areas. Complete basic equipment maintenance (fluids, battery checks, tire/track inspections) and notify maintenance of issues. Qualifications Minimum 1 year experience operating heavy-capacity forklifts or comparable heavy equipment in an industrial setting. Demonstrated experience handling loads of 10,000 lbs +, 36,000+ lbs; experience with 65,000 lb loads strongly preferred. Valid forklift/operator certification for heavy-capacity equipment (company or third-party). Strong knowledge of rigging, load securement, and weight distribution principles. Ability to read load charts, basic shop drawings, and weight specifications. Strong attention to safety and quality; history of safe operation. Ability to work rotating shifts, overtime, and weekends as needed. Physical ability to perform required tasks, including climbing, standing, and occasional heavy lifting. Good communication skills and ability to work as part of a team. Preferred OSHA 10/30 or equivalent safety training. Certified rigger/signal person or experience working with overhead cranes. Experience in steel, pipe, or heavy fabrication yards. Clean driving record. What We Offer Competitive pay and shift differentials. Medical, dental, vision, and retirement benefits. Paid time off and holidays. Ongoing training and certification opportunities. Stable, safety-focused work environment.