Operator jobs in Crestview, FL

Through its wholly owned subsidiaries, American States Utility Services, Inc. contracts with the federal government to provide water and wastewater services that include operating, maintaining, renewing, replacing, and constructing new systems on military installations throughout the United States. The installations where we presently operate are home to nearly 350,000 military and civilian personnel and families. We proudly deliver these vital services to military installations in Maryland, North Carolina, South Carolina, Texas (including southeastern New Mexico), Virginia, Florida, Kansas, and Massachusetts. Serving those who serve. United States Veterans, Reservists, National Guard Members, and Military Spouses encouraged to apply. PRIMARY JOB FUNCTIONS: Under close supervision, performs activities related to all phases of water and wastewater system utility construction. Observes and complies with all Federal, State and Company safety rules, regulations, policies and procedures. Reports all unsafe conditions and actions to a Supervisor and/or Manager. Operates backhoe, excavator, loader and skidsteer and provide training and assistance to others. Responsible for daily maintenance and service on construction equipment. Responsible for daily record keeping of maintenance and service performed on construction equipment. Adheres to all manufacturer provided safety operational procedures and industry safety standards for construction equipment. Performs physical construction including, but not limited to, excavating trenches manually or with equipment, pipe laying, backfilling excavations, compacting soil to grade specifications using a variety of manual pneumatic tools, and water and wastewater main testing. Performs all work in a safe, efficient manner, following all standards of performance. Work is repetitive and continuous. Responsible for ensuring safe working conditions including trench safety and bracing. Responsible for constructing and maintaining erosion control devices as required and as directed. Loads, unloads, identifies and distributes utility materials to the appropriate location, according to project plans and specifications Signals additional equipment operators to facilitate alignment, movement and adjustment of machinery, equipment and materials Cleans and prepares construction sites to eliminate possible hazards Performs other duties as assigned MINIMUM QUALIFICATIONS: High school diploma or equivalent required Four (4) years of verifiable experience operating heavy equipment such as backhoe, excavator, loader and skidsteer required. Requires field experience with digging operations in city and urban areas around existing utilities. Prior experience handling and setting a trench box in an excavation/utility ditch, lifting and placing steel plates, digging in confined spaces and placing material in and out of a dump truck required. Must work well with others and participate on a crew. Must possess and maintain a valid Driver's License issued by the state where employed CDL license issued by the state where employed and knowledge of driving a dump truck preferred. Two (2) years of prior water and wastewater system construction experience preferred. Working knowledge of general hand tools and power tools required Must take and pass Federal OSHA and or State Mandated Safety training with annual refresher courses as required by the associated regulations for this Position. Such training will be provided by company and compliance is mandatory PHYSICAL REQUIREMENTS : Work in extreme weather conditions Lift and carry loads up to 50lbs and push or pull up to 100lbs Work in confined spaces Work in areas exposed to noise and chemicals Standing, sitting, walking, lifting, carrying, pushing/puling, reaching, handling, fine dexterity, kneeling, crouching, crawling, bending, twisting, climbing, balancing, vision, hearing, talking, hand & foot controls The above job description is not intended to be, nor should it be construed as, exhaustive of all responsibilities, skills or competencies associated with this job. BENEFITS Our Company supports our employees with rich benefit programs and resources to help them thrive today and prepare for tomorrow. Benefit options include medical, dental, and vision plans with the Company currently paying 85% of the monthly premium for employees and their eligible dependents. We also offer paid vacation and sick time and twelve Company paid holidays per year. To help our employees plan for the future, we offer both a 401(k) retirement plan as well as a Defined Contribution Profit Sharing retirement plan. Additional benefits include life, AD&D, and LTD insurance as well as health savings account and flexible spending plans. COMPENSATION INFORMATION The compensation range provided is in compliance with state specific laws. Multiple factors are used to determine the actual starting rate of pay for all of our positions, including specific skills, years of experience, education, certification(s), and other job related factors. U. S. Citizenship is required pursuant to our contract with the federal government. The responsibilities of this position will involve access to information that may be considered confidential, private and sensitive. Therefore, the individual filling this position will be required to both allow and pass a background check. NOTE: Reasonable accommodations will be made to enable individuals with special needs to perform the essential functions.

Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Aerial Platform Operator - Tree Care JOB OVERVIEW The Equipment Operator at Tri-State Tree Service operates specialized tree care equipment while performing ground work and aerial operations from bucket trucks and lifts. This skilled position combines equipment operation with hands-on tree care, including cutting, roping, and rigging from aerial platforms. Support all tree care operations except traditional rope climbing, with excellent advancement opportunities toward crew leadership. DUTIES AND RESPONSIBILITIES Equipment & Aerial Operations Operate bucket trucks, aerial lifts, chippers, and specialized equipment Perform tree trimming, pruning, and removal from aerial platforms Cut, rope, and rig branches from bucket truck and lift platforms Conduct equipment inspections and routine maintenance Coordinate with ground crew for safe debris management and rigging Ground Operations & Safety Assist with ground-based tree care activities and debris handling Operate chainsaws, pole saws, and hand tools for ground-level cutting Support climbers with rigging, rope work, and material handling Follow ANSI/OSHA safety protocols and company procedures Report safety hazards and equipment issues immediately Customer Relations & Site Management Interact professionally with clients and address concerns Maintain clean, organized job sites and professional appearance Manage job site organization and thorough cleanup Ensure customer satisfaction through quality workmanship SKILLS AND QUALIFICATIONS Required 2+ years tree service experience with equipment operation background Proficiency operating bucket trucks, aerial lifts, and tree care equipment Experience with chainsaws, cutting techniques, and rigging operations Valid driver's license with clean driving record Ability to work confidently from aerial platforms at heights Essential Skills Strong mechanical aptitude and equipment troubleshooting abilities Knowledge of tree biology, pruning techniques, and cutting methods Excellent hand-eye coordination and spatial awareness for aerial work Effective communication and teamwork skills Problem-solving abilities for equipment and operational challenges Physical Requirements Lift 30-50+ pounds regularly and work in aerial platforms Comfortable working at heights from bucket trucks and lifts Good vision, hearing, and coordination for safe equipment operation Stamina for full days of physical outdoor work in various weather Excellent balance and depth perception for aerial operations Preferred Crane operation experience Basic mechanical repair and maintenance skills Bucket truck or aerial lift certification Advanced rigging and cutting technique knowledge Pre-Employment Requirements: This position requires successful completion of pre-employment screening, including but not limited to: background verification, and motor vehicle record review. Employment is contingent upon satisfactory results of all required screenings. Candidates unable to meet these requirements should not apply. COMPENSATION AND BENEFITS Pay: Competitive hourly rate based on experience | Schedule: M-F with occasional weekend emergency work Benefits: 401(k) matching, health/dental/vision insurance, life insurance, PTO, professional development WORK ENVIRONMENT Outdoor work across residential and commercial sites. Work from ground level and aerial platforms using specialized equipment. Physical demands include equipment operation, cutting, and debris management in various weather conditions. ABOUT TRI-STATE TREE SERVICE For 30+ years, Tri-State Tree Service has been excellence in tree care, serving Pensacola, FL. As a TCIA accredited company, we're among less than 1% with this prestigious certification. We invest in cutting-edge equipment and provide professional growth opportunities. Job Type: Full-time | Advancement: Crew Leader opportunities available Ready to operate specialized equipment while advancing your tree care career? Apply today! Compensation: $180.00 - $225.00 per day

Anderson Columbia Co. Inc. Florida - upload resume to show experience as a Heavy Equipment Operator. Must possess the ability to adapt to different personalities and management styles, team player with strong interpersonal skills, dedicated and hard working. Work schedule varies due to weather. Must pass a pre-employment drug test/heavy demand physical. You will receive a confirmation email once you successfully upload your resume. DFW / EOE Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Job DescriptionSalary: $27 We are currently accepting applications for local Heavy Equipment Operators for the Pensacola, FL, area This is a great opportunity to get hired on through a very well-known, respected company. EXPERIENCED DOZER, TRACKHOE & LONG REACH OPERATORS NEEDED MUST BE OSHA 10 CERTIFIED (we do provide the course) COMPETITIVE WAGES PAID WEEKLY BENEFITS OFFERED INCLUDE Health, Dental, Life and Vision Insurance PTO PAID VACATION FULL TIME TEMP TO HIRE Required skills and experience: 3 plus years' experience with heavy equipment operations. This positions main responsibility is operating excavation equipment. Preference will be given to those with other equipment operating experience, in: Compactor, Excavators, Dozer, Long Reach etc. Essential Functions Operate heavy equipment on rough grade work and grade to specifications in and around jobsite. May operate/maintain off road trucks to facilitate hauling, delivery and/or relocation of materials such as sand, gravel and crushed rock. Strong attention to detail and ability to keep excavator/equipment clean and in operating order. Perform Multi-Functions when not operating equipment. Competencies: Ability to follow OSHA safety guidelines as well as those set forth by company policy. Ability to follow instructions of supervisor in order to adhere to job specs, company policies and safety guidelines. Dependable, reliable, fulfilling responsibilities, working independently and as a team striving for excellence with a strong work ethic. Conduct and behavior exemplifying company and industry standards. Required job knowledge, skills and abilities will be discussed at the time of interview. We provide a drug-free workplace to protect the health and safety of our employees and patrons. Employment is contingent upon successfully passing a pre-employment drug screen.

Now hiring for a Full Time Heavy Equipment Operator to work in the Pensacola FL area. Prior experience operating a variety of heavy equipment, specifically EXCAVATORS, BULLDOZERS, & SKID STEERS. Knowledge of operation and maintenance of various types of heavy equipment. Must be able to maintain logs, time sheets, dispatch and trip reports. A sound understanding of pertinent safety guidelines. Good physical condition and stamina AND be able to work in various weather conditions. Ability to lift up to 50 lbs. Exceptional manual dexterity and hand-eye coordination. Excellent vision -OR- the use of prescribed lenses. ALL work performed will be in the PENSACOLA area HOURS: Mon - Fri 7am - 4pm Occasional Mandatory OT (from 4pm-6pm) Paid at time & a half NO Weekends PAY: Starting Pay Range is: $17/hr. - $25/hr. (Depending On Experience) REQUIREMENTS: Must have experience operating Excavators, Bulldozers, and Skid Steers Must pass Drug Test Must pass a Background-Check TEL Staffing complies with regulations enforced by the EEOC. TEL Staffing is a drug-free workplace. This position is Temp to Hire. No benefits are offered during the Temp period.

Including, but not limited to: • Unloading pallets, boxes, and bundles • Material handling / sorting - pushing, pulling, picking, lifting, carrying, and filling up hoppers, boxes, and conveyor belts • Unpacking boxes using box cutters, separating plastics, zip ties, blister packs, and other packaging materials • Disassembling small equipment, cutting wires, torqueing pipefittings, removing bolts, automobile parts, and appliance parts. • Work with recycling equipment for processing metal product e.g. metal shears, band saw and wire strippers • Direct traffic of yard vehicles traveling through yard • Light facility maintenance - painting, scraping, moving furniture and equipment • Maintenance - selecting and using tools properly, pulling and installing parts for machinery, working with other employees to assist machinery repair • Housekeeping - sweeping, cleaning, shoveling, and debris collection • Moderate and Periodic landscaping work • Clean up work area at the end of shift • Keep work areas neat and orderly • Regular attendance and punctuality are essential job functions • Organizing materials to have more effective use of space • Dispose of various waste materials in the appropriate manner • Inspection to ensure cleanup is completed • Effective housekeeping in workplace area is an ongoing operation for safety and better hygienic conditions for all team members. Qualifications Employees in this position prior to April 2014 are presumed to be qualified and are "grandfathered" into their positions. • Must pass a medical physical and drug test • Must pass a background check • Preferred - high school diploma or GED and/or foreign education acceptable • Bi-lingual (English & Spanish) language skills a plus • Ability to: communicate with others effectively; understand direction (written or oral) and use basic math skills as the job demands • Willingness to learn how to: sort metal, identify colors, shapes, and weights; properly maintain equipment; properly utilize PPE Job Expectations Comply with all applicable federal, state, local, & SA Recycling safety, health, & environmental rules, regulations, policies, & procedures. Physical Requirements • Work Environment: Scrap metal yard, outdoor • Equipment & Tools: Yard equipment, hand tools, and PPE. • Physical Demand Level: Moderate to heavy • Work Capacity: Laborer Work Capacity • Sensory Demands: Hearing, vision, smell, touch and taste • Hand Movements: Repetitive motions, gripping

Job Description Machine Operators and Machinists Full Time Machine shop workers typically work 40 hours per week, but they may work overtime during busy periods. Job Duties: Must be able to read various measuring devices, such as calipers, micrometers, dial indicators and telescoping gauges. Reviews drawings, instructions, blueprints or samples to ensure accurate production. Operates and maintains lathe and milling machines. Monitors production, adjusts feed and other settings as necessary. Selects appropriate machine settings for a given task. Plans proper sequence of tasks to complete the assignment. Takes precise measurements for cutting or shaping. Checks output for accuracy and quality. Operates cranes and forklifts to move raw materials within the foundry and finished products out of the foundry. Maintains a safe and clean workstation. Job Requirements: Education: high school diploma or GED certificate. Experience working with machine tools and mechanical assembly. Excellent coordination and mechanical skills. Strong attention to detail, accuracy, and safety. Solid written and verbal communication skills Proficient in Math. Basic computer skills would be a plus. Abe to stand all day and lift up to 50 pounds.

Job description COMPANY PROFILE: Gulf Cable, LLC is a fast expanding, future looking and continuous innovator across the energy market. Gulf Cable provides integral components for solar and wind farm development as well as electrical cabling for key industrial markets including the Oil & Gas, Communications and Irrigation markets. Gulf Cable takes a service-oriented approach to all work and with a fast-paced culture, friendly working environment it is a rewarding career destination. Essential duties: Read, interpret and understand blueprints and drawings including symbols, welding symbols, material type and material shape. Machinists are required to use milling machines, grinders, lathes and other machine tools Plan machining operations by studying work orders, blueprints, drawings, specifications, materials, machining parameters, and interpreting geometric dimensions and tolerances. Properly set up and operate Manual Mill and machine parts/components to the required specifications. Properly utilize machining tools. Plan and perform milling operations. Select appropriate speeds, feeds and tooling for operations. Properly lift and position workpiece on machine table and secure it. Verify alignment and conformance of machined workpiece to specifications using measuring devices. Maintain safe operations by adhering to company safety procedures and policies. Benefits We offer our employees a competitive salary and benefits package, which includes a comprehensive Medical, Vision, and Dental Plan, Company paid Life and Disability Insurance, 401(k) Plan, and Education/Certification assistance. Gulf Cable is an equal opportunity employer. We recognize the power and importance of a diverse employee population and strongly encourage applicants with various experiences and backgrounds. Job Type: Full-time Job Type: Full-time

**MasTec Utility Services** delivers critical infrastructure construction and engineering services for power delivery, gas, and water customers, specializing in overhead and underground electric distribution for power delivery systems, gas distribution construction for gas systems, and turnkey solutions for a variety of water, sewer, and civil infrastructure projects. Backed by the strength of decades of experience, unrivaled industry skills, and a deep commitment to core values, MUS delivers safe, innovative, and environmentally responsible services that provide extraordinary value to clients. MasTec Utility Services is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. MasTec Utility Services is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. MUS is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. **Job Summary** The OHE Operator is responsible for operating the machines required to install the aerial conduit, cables, transformers, pull boxes, transformer pads, and switchgear colors for customers. This position supports the Line team and works with personnel within the department. Responsibilities + Operate jobsite equipment safely, such as mobile cranes, bulldozers, angle dozers, front end loaders, backhoes, excavators, track hoe, trenchers, digger-derricks, or other construction equipment. + Perform service, safety checks, and minor repairs on machines, check oil and fluids. + Inspect digging areas to ensure it has been staked/located prior to digging. + Stake/locate work areas prior to digging. + Work with maintenance crew or assist as laborer when not operating equipment. + Dig around all live utilities, both underground and overhead. + Train, guide, or oversee work of lower graded operators and laborers, when needed. + Comply with proper safety standards/procedures and work practices according to MasTec or the customer, whichever standard is higher. + Load trucks in a safe and accident-free manner. + Actively improve operations, decrease turnaround times, streamline work processes, and work cooperatively to provide quality seamless customer service with quality timeliness. + Perform other duties as required and/or assigned. Qualifications **Minimum** + High school diploma, or equivalent. + 1 year of relevant experience. + Valid driver's license. + OSHA 10 Certification. **Preferred** + 2 or more years of experience. + CDL Class A driver's license. **Physical Demands and Work Environment** This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. _Please note this is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities._ Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. **Minimum** + High school diploma, or equivalent. + 1 year of relevant experience. + Valid driver's license. + OSHA 10 Certification. **Preferred** + 2 or more years of experience. + CDL Class A driver's license. **Physical Demands and Work Environment** This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. _Please note this job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities._ Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. + Operate jobsite equipment safely, such as mobile cranes, bulldozers, angle dozers, front end loaders, backhoes, excavators, track hoe, trenchers, digger-derricks, or other construction equipment. + Perform service, safety checks, and minor repairs on machines, check oil and fluids. + Inspect digging areas to ensure it has been staked/located prior to digging. + Stake/locate work areas prior to digging. + Work with maintenance crew or assist as laborer when not operating equipment. + Dig around all live utilities, both underground and overhead. + Train, guide, or oversee work of lower graded operators and laborers, when needed. + Comply with proper safety standards/procedures and work practices according to MasTec or the customer, whichever standard is higher. + Load trucks in a safe and accident-free manner. + Actively improve operations, decrease turnaround times, streamline work processes, and work cooperatively to provide quality seamless customer service with quality timeliness. + Perform other duties as required and/or assigned.

Equipment operators are responsible for operating heavy equipment to assist in the handling, loading, unloading, and transportation of marine products and equipment at their respective OneWater Marine location. ESSENTIAL DUTIES AND RESPONSIBILITIES Duties (Most Important to Least Important) Safely operates equipment to load, unload, and move boats, parts, and equipment within the facility. Conducts routine inspections and maintenance of equipment to ensure proper functioning and safety. Communicate with team members and management to coordinate tasks and ensure timely completion. Help maintain the store lot clean and organized as instructed by management. Report any damage or concerns about boats or equipment to management. Follow all safety procedures and guidelines. Ensure all operations comply with safety regulations. Stay updated on all safety regulations, equipment training, and equipment operating certifications. All other duties as assigned. SKILLS Excellent communications skills with the ability to work in a team environment. Problem solving skills and strong attention to detail. Knowledge of safety standards and regulations related to equipment operation. QUALIFICATIONS / REQUIREMENTS Valid Driver's License Equipment operator certification (forklift, crane, etc.) PHYSICAL DEMANDS Use the table / checklist below to indicate what is required of this position. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Using the rating scale below, indicate how often the following physical activities and environmental conditions are required/present in performing the Essential Job Responsibilities. C=Constantly F=Frequently O=Occasionally R=Rarely (5-8 hrs. /shift) (2-5 hrs. /sift) (Up to 2 hrs. /shift) (Not regular part of job) Physical Activities Remaining in a stationary position, often standing or sitting for prolonged periods O Repeating motions that may include the wrists, hands and/or fingers C Moving about to accomplish tasks or moving from one worksite to another F Operating motor vehicle C Communicating with others to exchange information C Assessing the accuracy, neatness and thoroughness of the work assigned F Hearing C Talking F Seeing C Eye/Hand/Foot Coordination R WORK ENVIRONMENT Use the table / checklist below to indicate the environmental conditions and physical demands of the position. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. How would you best describe the environmental demands for this position? (Check only one) Environmental Conditions No adverse environmental conditions expected x Poor ventilation Hazardous conditions Small and/or enclosed spaces Noisy environments Exposure to intense weather conditions X How would you best describe the physical demands for this position? (Check only one) Physical Demands Sedentary work that primarily involves sitting/standing ☐ Light work that includes moving objects up to 20 pounds ☐ Medium work that includes moving objects up to 50 pounds ☐ Heavy work that includes moving objects up to 100 pounds or more ☒ This position operates exclusively in an indoor office environment with controlled temperatures. (Y/N) DO NOT MAKE ANY EDITS TO THE BELOW PORTION OF THE : OneWater Marine is an Equal Opportunity Employer and complies with ADA regulations as applicable. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Job DescriptionBenefits: 401(k) matching Competitive salary Dental insurance Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Lift or Bucket Truck Operator Arboriculture Tri-State Tree Service seeks a skilled Aerial Platform Specialist to handle specialized arboriculture equipment while executing ground support and elevated operations from hydraulic lifts and bucket trucks. This technical role merges equipment expertise with direct tree care services, offering excellent career progression toward supervisory roles. Key Responsibilities Equipment & Elevated Work Handle bucket trucks, hydraulic lifts, chippers, and professional arboriculture machinery Execute tree trimming, pruning, and extraction services from elevated platforms Perform cutting, rigging, and branch management from lift positions Complete equipment evaluations and preventive maintenance Collaborate with ground teams for secure debris removal Ground Support & Safety Contribute to ground-level tree care tasks and material management Handle chainsaws, extension saws, and manual tools Assist climbing specialists with rigging systems and rope handling Adhere to ANSI/OSHA safety standards and organizational protocols Communicate safety concerns and equipment issues promptly Client Service Engage professionally with customers and resolve inquiries Maintain organized, clean work areas and professional presentation Oversee project site coordination and complete cleanup procedures Requirements Essential Qualifications 2+ years arboriculture experience with equipment handling background Competency operating bucket trucks, hydraulic lifts, and tree care machinery Background with chainsaws, cutting methods, and rigging systems Current driver's license with excellent driving history Confidence working from elevated platforms at significant heights Core Skills Strong mechanical understanding and equipment diagnostic abilities Knowledge of tree physiology, pruning methods, and cutting techniques Superior hand-eye coordination and spatial perception for aerial operations Strong communication and collaborative abilities Physical Demands Handle 30-50+ pounds consistently and operate from aerial platforms Comfort working at elevation from bucket trucks and lifts Sharp vision, hearing, and coordination for safe machinery operation Endurance for physical outdoor labor in varying weather conditions Preferred Crane operating experience Mechanical repair and maintenance knowledge Bucket truck or hydraulic lift certification Pre-Employment Requirements: This position requires successful completion of pre-employment screening, including but not limited to: background verification, and motor vehicle record review. Employment is contingent upon satisfactory results of all required screenings. Candidates unable to meet these requirements should not apply. About Tri-State Tree Service For over 30 years, Tri-State Tree Service has been a beacon of excellence in the tree service industry, proudly serving Pensacola, FL. As a TCIA-accredited company, we're among the eliteless than 1% achieve this prestigious certification. Our commitment to innovation sets us apart through cutting-edge equipment and advanced techniques. Compensation Competitive hourly wages based on qualifications Monday-Friday schedule with periodic weekend emergency response 401(k) with matching, health/dental/vision coverage, life insurance, PTO Career development opportunities Position Type: Full-time with supervisory advancement opportunities Ready to master specialized equipment while building your arboriculture career? Submit your application today! *All offers of employment are conditional pending satisfactory completion of required pre-employment screenings in accordance with company policy and applicable law.

Gulf Cable is looking to hire a few, well rounded, Forklift Drivers. This position is full time, with benefits at our Gulf Cable facility located in Milton, FL. You will be responsible for operating a forklift to move, locate, relocate, stack and count material. The Driver is accountable for the safe and efficient operation of the vehicle and may also be required to perform other duties that require heavy lifting other types of manual labor. Job Requirements: - Wearing full PPE at all times (Steel toes, pants, safety glasses) - Knowledge of Safety protocols for forklift operation and ability to follow guidelines - 1 year experience lifting more than 5k lbs. on a Forklift Benefits: Health insurance Dental insurance Vision insurance Retirement plan Paid time off Pay Frequency: Bi weekly or Twice monthly Shifts: 12hr, 5 days a week, 7:30am to 7:30pm or 7:30pm to 7:30am Job Type: Full-time Pay: $16.00 - $17.00 per hour Schedule: 12 hour shift Day shift Night shift Experience: forklift operator: 1 year (Preferred) License/Certification: Certified Forklift Operator (Preferred) Work Location: In person

Loading, unloading, shipping, and receiving warehouse items. Transporting materials to different locations within the facility. Optimizing loads to ensure operational efficiency. Securing loads to the machine before transportation. Inspecting for damages to vehicles. Scheduling vehicles for maintenance and repairs. Operating and managing technical equipment. Managing inventory by utilizing RF scanning equipment. Picking and wrapping orders for shipment. Identifying workplace safety hazards. Adhering to safety management standards. Adhering to production schedules.

ESSENTIAL DUTIES AND RESPONSIBILITIES Selects, positions, and aligns angle degrees in machine ram and bed. Turns setscrews or bolts to fasten clamp bar that holds guides in position. Turns adjustment screws to set specified pressure of ram and clearance between cutting path of saw. Lays out or details layout on work stock from blueprints or templates. Positions work piece to align layout marks of desired cut. Starts saw to cut desired angle of material. Sets stops on saw and repositions stock to run successive pieces, or to perform multiple operations. Keeps a running inventory of assigned material. Verifies dimensions of work piece. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school education preferred. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry, and read/use tape measure. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Ability to adhere to delegation of authority and lead by instructions of management and supervision. CERTIFICATES, LICENSES, REGISTRATIONS None required. COMPUTER SKILLS Basic computer skills may be preferred or required for Programmable Brakes. OTHER SKILLS AND ABILITIES Attendance is an essential job requirement defined as having regular, consistent, reliable, punctual and predictable attendance including the ability to work regular hours and shifts, overtime before and after shifts and on weekends. Ability to work as part of a team, including all related departments/plants or independently as required to achieve internal and external customer satisfaction. TRAVEL REQUIREMENTS None required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 100 pounds, and occasionally lift and/or move up to 200 pounds with the assistance of other employees. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock. The noise level in the work environment is usually loud. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Industries Group, LLC has an opening for a Forklift Operator to join our Team in the Cantonment, FL area. The forklift operator will be responsible for operating forklifts to transport, stack, and retrieve supplies and materials. Qualification Standards: High school or equivalent Preferably one (1) to three (3) years of experience in specified skill Must pass Turner Qualification written and practical exams Able to strap load to forks via ratchet strap or similar device Some job sites may require further NCCER certification Post-offer drug/alcohol screen and physical evaluation Job site safety requirements (clean shaven, long sleeves, steel toe boots, etc.) Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) Applicant/employee must not pose a direct threat to the health or safety of others at the workplace Must have a valid driver's license Functional Requirements: Moves hand and foot levers to control diesel, electric, or gasoline operating equipment; must have a valid driver's license; interprets hand signals to determine where materials are to be placed; reads and interprets load charts; may be required to manipulate equipment on unleveled working surfaces; may perform maintenance duties such as cleaning, greasing and oiling machines/equipment; and maintains a clean and safe work area. Compensation: Final agreed upon compensation is based upon individual qualifications and experience. Benefits: Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: Employee may be required to do the following: climbing into and out of equipment; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands, fingers and feet to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.

Benefits: 401(k) matching Competitive salary Dental insurance Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance 401(k) Lift or Bucket Truck Operator Arboriculture Tri-State Tree Service seeks a skilled Aerial Platform Specialist to handle specialized arboriculture equipment while executing ground support and elevated operations from hydraulic lifts and bucket trucks. This technical role merges equipment expertise with direct tree care services, offering excellent career progression toward supervisory roles. Key Responsibilities Equipment & Elevated Work • Handle bucket trucks, hydraulic lifts, chippers, and professional arboriculture machinery • Execute tree trimming, pruning, and extraction services from elevated platforms • Perform cutting, rigging, and branch management from lift positions • Complete equipment evaluations and preventive maintenance • Collaborate with ground teams for secure debris removal Ground Support & Safety • Contribute to ground-level tree care tasks and material management • Handle chainsaws, extension saws, and manual tools • Assist climbing specialists with rigging systems and rope handling • Adhere to ANSI/OSHA safety standards and organizational protocols • Communicate safety concerns and equipment issues promptly Client Service • Engage professionally with customers and resolve inquiries • Maintain organized, clean work areas and professional presentation • Oversee project site coordination and complete cleanup procedures Requirements Essential Qualifications • 2+ years arboriculture experience with equipment handling background • Competency operating bucket trucks, hydraulic lifts, and tree care machinery • Background with chainsaws, cutting methods, and rigging systems • Current driver's license with excellent driving history • Confidence working from elevated platforms at significant heights Core Skills • Strong mechanical understanding and equipment diagnostic abilities • Knowledge of tree physiology, pruning methods, and cutting techniques • Superior hand-eye coordination and spatial perception for aerial operations • Strong communication and collaborative abilities Physical Demands • Handle 30-50+ pounds consistently and operate from aerial platforms • Comfort working at elevation from bucket trucks and lifts • Sharp vision, hearing, and coordination for safe machinery operation • Endurance for physical outdoor labor in varying weather conditions Preferred • Crane operating experience • Mechanical repair and maintenance knowledge • Bucket truck or hydraulic lift certification Pre-Employment Requirements: This position requires successful completion of pre-employment screening, including but not limited to: background verification, and motor vehicle record review. Employment is contingent upon satisfactory results of all required screenings. Candidates unable to meet these requirements should not apply. About Tri-State Tree Service For over 30 years, Tri-State Tree Service has been a beacon of excellence in the tree service industry, proudly serving Pensacola, FL. As a TCIA-accredited company, we're among the elite-less than 1% achieve this prestigious certification. Our commitment to innovation sets us apart through cutting-edge equipment and advanced techniques. Compensation • Competitive hourly wages based on qualifications • Monday-Friday schedule with periodic weekend emergency response • 401(k) with matching, health/dental/vision coverage, life insurance, PTO • Career development opportunities Position Type: Full-time with supervisory advancement opportunities Ready to master specialized equipment while building your arboriculture career? Submit your application today! *All offers of employment are conditional pending satisfactory completion of required pre-employment screenings in accordance with company policy and applicable law. Compensation: $180.00 - $225.00 per day

Now hiring experienced Machine Operators to operate our Screening/Stranding Machines in Milton, FL. Must have the willingness to learn the company's process. Previous experience as a Machine Operator is required, but it does not have to be on this specific machinery. Any experience with wire drawing or spool reels is a plus. Our company is fast expanding, future looking, and a continuous innovator across the energy market. We provides integral components for solar and wind farm development as well as electrical cabling for key industrial markets including the Oil & Gas, Communications and Irrigation markets. Within this fast-paced culture, we take a service-oriented approach to all of our work, by utilizing a friendly working environment. We truly believe that our company is a rewarding career destination. DUTIES AND RESPONSIBILITIES: Safely operate Screening and/or Stranding machines that are used in our cable manufacturing facility. Read/interpret/understand blueprints and/or drawings (including symbols, material type, and material shape). Setting up the screening and/or stranding machines independently from a selection of tooling options: set-up, pay-off, take-up; setting running parameters; consistently monitor the QUALITY of product. Familiar with using/operating electronic screens for controlling the screening or stranding process (Human Machine Interface). Good mechanical skills with the ability to handle and move heavy reels of products. Must maintain a consistent log of production AND quality per company systems & standards. Maintain safe operations by adhering to company safety procedures and policies. EXPERIENCE: At least 1 year as a manufacturing Machine Operator (or as a CNC Operator) is preferred but NOT required. At least 1 year of experience working in a manufacturing/machining environment is preferred but NOT required. EDUCATION: High school Diploma (or equivalent) is preferred but NOT required. REQUIREMENTS: Must complete a pre-employment background check (having something on your record does NOT eliminate you from this position, we take everything on an individual "case-by-case" basis) Must be able to pass a drug test. Must have Steel-toed boots. Must have RELIABLE transportation to Milton FL. PAY: Position starts at: $15/hr. --- $18/hr. ---Depending on level of Experience (with the opportunity to increase over-time) SCHEDULE: Full-Time --- All shifts are 12-hr's Currently Hiring for BOTH Day & Night Shift Day Shift = 7:30am - 7:30pm Night Shift = 7:30pm - 7:30am ***Expect to work at least 40-60 hours per week*** (ALL hours worked over 40-hrs will be paid at Time-and-a-Half) TEL Staffing complies with regulations enforced by the EEOC. This position is Temp-to-Hire. No benefits are offered during the Temp period.

Gulf Cable is looking to hire a few, well rounded, Forklift Drivers. This position is full time, with benefits at our Gulf Cable facility located in Milton, FL. You will be responsible for operating a forklift to move, locate, relocate, stack and count material. The Driver is accountable for the safe and efficient operation of the vehicle and may also be required to perform other duties that require heavy lifting other types of manual labor. Job Requirements: - Wearing full PPE at all times (Steel toes, pants, safety glasses) - Knowledge of Safety protocols for forklift operation and ability to follow guidelines - 1 year experience lifting more than 5k lbs. on a Forklift Benefits: Health insurance Dental insurance Vision insurance Retirement plan Paid time off Pay Frequency: Bi weekly or Twice monthly Shifts: 12hr, 5 days a week, 7:30am to 7:30pm or 7:30pm to 7:30am Job Type: Full-time Pay: $16.00 - $17.00 per hour Schedule: 12 hour shift Day shift Night shift Experience: forklift operator: 1 year (Preferred) License/Certification: Certified Forklift Operator (Preferred) Work Location: In person

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Industries Group, LLC has an opening for a Forklift Operator to join our Team in the Cantonment, FL area. The forklift operator will be responsible for operating forklifts to transport, stack, and retrieve supplies and materials. Qualification Standards: • High school or equivalent • Preferably one (1) to three (3) years of experience in specified skill • Must pass Turner Qualification written and practical exams • Able to strap load to forks via ratchet strap or similar device • Some job sites may require further NCCER certification • Post-offer drug/alcohol screen and physical evaluation • Job site safety requirements (clean shaven, long sleeves, steel toe boots, etc.) • Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) • Applicant/employee must not pose a direct threat to the health or safety of others at the workplace • Must have a valid driver's license Functional Requirements: Moves hand and foot levers to control diesel, electric, or gasoline operating equipment; must have a valid driver's license; interprets hand signals to determine where materials are to be placed; reads and interprets load charts; may be required to manipulate equipment on unleveled working surfaces; may perform maintenance duties such as cleaning, greasing and oiling machines/equipment; and maintains a clean and safe work area. Compensation: Final agreed upon compensation is based upon individual qualifications and experience. Benefits: Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: Employee may be required to do the following: climbing into and out of equipment; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands, fingers and feet to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Job Posted by ApplicantPro