Operator jobs in Dana Point, CA - 709 jobs

Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. The Gill Corporation is seeking a Prepregger Operator Trainee who will set up and operate the work center. Prepares all necessary equipment and performs material testing. Responsibilities: Set up all equipment needed. Test and records all data needed to run product. Runs material. Reviews and monitors material for quality issues. Tests material and records data Identifies material with identification tags. Keep work area clean and safe. Must be available any shift, overtime, and weekends. Other essential duties may be assigned. Shift Requirement and Compensation for this role: 2nd Shift 1:30pm - 10:00pm, including OT & Weekends Compensation: Base Rate starting at $24.70/hr (+ $2.00/hr shift differential) Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Qualifications: Must have a high school diploma, GED or equivalency Must have English reading and verbal communication skills sufficient to read, understand and communicate the company operating procedures and policies. Must be able to lift, push and pull a minimum of 50 lbs. Must be able to demonstrate math proficiency equal to or greater than required for the position applied. Must be available to work the shift specified by the position and be flexible to potential overtime on weekends/ holidays. Acceptable Spirometry Test results. (Positions that require the use of a full or half-face respirator) ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Energy: Forget about blending in. That's not our style. We're the risk takers, the trailblazers, the game-changers. We're not perfect and we don't pretend to be. We're raw, unfiltered, and a bit unconventional. Our drive is just like our athletes, unrivaled. The power is in your hands to define what success looks like and where you want to take your career. It's not just about what we do, but about who we become on along the way. We are much more than a brand here. We are a way of life, a mindset. Join us. A Day in the Life: As a Machine Operator at Monster Energy, you'll be at the heart of our production process, responsible for operating and maintaining equipment to ensure that production tasks are completed efficiently and accurately. Your efforts will ensure that production tasks are carried out with precision and efficiency, upholding the exceptional quality and standards that define Monster Energy's products. The Impact You'll Make: Operate and monitor line, removing or shifting materials and/or finished product as necessary to facilitate proper flow and machine operation. Ensure package and product quality. Operate all manufacturing equipment efficiently and safely. Performs all running maintenance, housekeeping and organizing. Execute light duty troubleshooting. Maintain clean work area throughout good housekeeping practices. Clean equipment during and after shift. Perform CIP/Sanitation as required. Expedite repairs to line, working with maintenance as necessary. Act as a member of team to deliver results and react to issues appropriate for situation Monitor, measure and report system performance. Conducts all quality control requirements. Perform product and package changeovers. Maintain accurate and current records of down time and machine operations Communicate with manager, mechanics, and other operators to solve problems, take direction and assigned work. Utilizes computer- based workstation systems. Who You Are: Prefer a Bachelor's Degree in the field of -- Heavy Machinery, Operations or related field of study Additional Experience Desired: Between 1-3 years of experience in a machine operator role Additional Experience Desired: Between 1-3 years of experience in manufacturing environment Computer Skills Desired: Microsoft office Additional Knowledge or Skills to be Successful in this role: Knowledgeable about the limits and capabilities of different machines is essential for optimal performance. Monster Energy provides a competitive total Compensation. This Position has a range of $24-$30/ hourly. The actual pay may vary depending on your skills, qualifications, experience, and work location.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production OperatorPerforms a variety of tasks requiring knowledge of production processes and responsible for day to day operations associated with the production lines. Essential Functions Responsible for overall maintaining of a production line, including starting and stopping of all equipment (palletizers, carton makers, carton sealers, drop packers, injection, etc.) as applicable. Ability to perform minor adjustments to production equipment as directed. No mechanical work is to be performed without prior approval. Responsible for accurately completing and updating information forms and logs such as Machine Report, Quality Report, Downtime Report and Carton Top Load Report Ability to recognize unsafe conditions and actions and follow plant safety rules including safe lifting practices and safe machine operations. Personal protective equipment is to be used where required. Housekeeping: maintain general housekeeping in all areas of production, including the break rooms and rest rooms. Bale plastic, cardboard and contaminated bottles when needed; grind bottles when needed. Raw materials: keep bottle caps, labels, cartons, trays, tray and pallet wraps (plastic rolls), pallet glue for hot melt tanks, slip sheets, etc. in adequate amounts to ensure continuous smooth running of equipment and operation. Maintain quality requirements in accordance with company standards; accurately filling out hourly inspection sheets based on overall production quality. Responsible for recognizing and reporting all quality defects immediately. Ability to work in multiple areas of production with minimal supervision; perform relief duties when required Ability to troubleshoot minor production equipment issues in all areas and collaborate with maintenance team as necessary. Understanding of computer systems such as Oracle/MES or current order management system Comprehension of line flow and manufacturing process to maximize through put Ability to communicate issues clearly and concisely Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 0 Year - Experience managing people/projects Experience operating multiple manufacturing machines *experience may include a combination of work experience and education Preferred Qualifications: 4 Years - Experience in Field or similar manufacturing environment 4 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$20.01 - $27.02 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Job Description Qualifications: Start Time:7:30 AM End Time:4:00 PM **PRINT PRODUCTION SPECIALIST** As a Print Production Specialist, you will play a crucial role in ensuring high-quality output and maintaining production efficiency. This position will work closely with other team members to facilitate projects of varying scale within tight deadlines. The ideal candidate must have a strong background in print production processes, be proficient in prepress, leadership experience, and have a willingness to learn the digital printing equipment, but not necessarily be the one running it. This role requires attention to detail, problem-solving skills, and the ability to work collaboratively in a fast-paced environment. The specialist will be responsible for prepress, color management, quality control, creating samples, and providing print solutions support to the team. Experience in prepress and digital print production workflows. Proven ability to supervise, train & collaborate with other team members, fostering a positive and productive work environment. Proficiency with MAC-based print/production software, including Adobe Creative Suite, XMF, and RIP software Fiery & Xitron. Knowledge of the JPress 750HS Fujifilm Digital Printer and XMF Client Setup / Press Ready Digital Print Production Workflow. Previous experience in a digital press/printing environment is preferred. Ability to read and interpret work instructions, job tickets, and production specifications. Strong verbal and written communication skills. Excellent customer service skills with the ability to interact professionally with clients and team members. Strong attention to detail and ability to maintain quality standards. Ability to work independently and meet production deadlines. High School Diploma or equivalent; technical training or relevant work experience preferred Physical Demands: The physical demands described here are representative of those required to successfully perform the essential functions of this position. The employee is frequently required to stand, walk, sit, and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Responsibilities: Receive and process high-resolution customer files, ensuring they meet print specifications while adhering to production schedules. Prepare files for print and operate digital printing equipment as required. Translate orders through the internal ticketing system into job production, reviewing requests in advance to address any concerns with the design team or requester. Ensure adequate time is scheduled and materials are acquired for production. Maintain a strong focus on quality control, ensuring all jobs meet high standards of accuracy and consistency. Log and track digital jobs, coordinating effectively with other team members. Maintain and apply accurate material color profiles. Adjust image sizing and placement to ensure proper fit on finished products. Perform preflight checks on customer artwork to identify errors, omissions, or additional requirements. Produce layout proofs and samples for internal and customer review. Execute rasterization and final preparation of files for digital output. Prepares a scale proof and presents the sample to customer service for customer approval and revisions as needed. Modify artwork as necessary to align with customer expectations. Maintain electronic file organization and archive all created graphics for future reference. Provide direct customer support, addressing feedback and turnaround edited proofs promptly. Supervise and guide the print production team members, providing training, and support. Assist with the operation of the JPress 750HS Fujifilm Digital Printer as needed, ensuring proper calibration and production quality. Assist with routine maintenance and troubleshooting of digital print equipment. Maintain a clean and organized work area, adhering to company policies and safety regulations. Perform other duties as assigned. Comments/Special Instructions Looking for prepress and leadership experience in the Printing Industry. Thank you!

Purpose of Role The Heavy Equipment Operator will operate one or more types of heavy machinery-including excavators, dozers, backhoes, compactors, articulated dump trucks, and front‑end loaders-as part of earth‑moving activities at an environmental remediation site. Equipment may utilize CAT or John Deere controls. The role also includes performing minor maintenance and basic equipment repairs. Primary Responsibilities Include Operating heavy equipment safely and efficiently with strong skill, coordination, and situational awareness Maintaining continuous attention to detail and safety while operating equipment for extended periods Understanding equipment limitations, including load capacities, to avoid overloading or compromising equipment stability Qualifications 4+ years of experience on civil construction projects 5+ years of experience as a heavy equipment operator Proven ability to operate excavators, bulldozers, backhoes, compactors, articulated dump trucks, and front‑end loaders High school diploma or GED Current 40‑Hour HAZWOPER and 8‑Hour HAZWOPER Refresher certifications Formal training and certification on assigned equipment Ability to read grading plans and interpret cut/fill stakes Willingness to travel to local project sites Strong teamwork skills Ability to adapt to changing site conditions Hourly Pay Rate: $35 - 50+/hr DOE

Why Choose Us? Novolex is a leading manufacturer of food, beverage, and specialty packaging that supports multiple industries, including foodservice, restaurant delivery and carryout, food processing, grocery and retail, and industrial sectors. Novolex's manufacturing and sourcing expertise spans a diverse range of substrates, including resin, paper, molded fiber, aluminum, and more. We provide customers a broad array of stock and customized solutions with 120 product categories, 250 brands, and over 39,000 SKUs. Our Sustainability Commitment The Novolex sustainability vision is built upon three pillars: our products, our operations, and our people. Each is critically important to our growth and future as a business. These pillars form the foundation of our company-wide commitment to sustainability, helping us achieve our ambitious goals through our wide-ranging initiatives. Responsibilities Novolex, Where Packaging Innovation Meets Career Opportunities! Lift Truck Operator | Santa Fe Sprinks, California|Hiring Immediately Compensation * Competitive starting pay range of $19.96-$23.00 per hour, paid weekly * Pay: Competitive starting pay rate based on experience and qualifications * Bonuses: Eligible for a monthly bonus based on plant productivity * Add EXTRA money to your paycheck by referring friends and family Available Shifts * 1st: 6:00 am - 2:30 pm * 2nd: 2:00 pm - 10:30 pm * 3rd: 10:00 pm - 6:30 am Position Overview As a key member of the production team, this role ensures continuous workflow by maintaining a steady supply of materials to the production line. The individual in this position collaborates closely with team members and leverages their knowledge to support others, contributing to overall efficiency and operational success. Operate all warehouse equipment required to transfer finished goods and other products to the appropriate areas. All warehouse equipment includes, but is not limited to, forklift, clamp truck. Essential Duties and Responsibilities * Load and unload trucks efficiently in accordance with department standards * Stock all goods in a safe and stable manner * Communicate pertinent information to the relief at shift change * Follow all safety policies and procedures * Maintain work area in an organized, safe, and clean manner. Knowledge of 6s is a plus * Know locations and how to operate emergency stop buttons and fire extinguishers * Complete forklift checklist * Monitor and record all products returned/received * Check the accuracy of finished product count on pallets, product ID, ensure all pallets only have one Port Ticket on them when removing from lines, and accurately complete all required paperwork * Fill forklift propane tank at the end of the shift * Accurate Cycle counts as designated by the Team Leaders * Effective organization and staging of materials to support the accuracy of inventories * Knowledge of LOTO procedures is a plus Qualifications * Minimum of one year of recent forklift experience preferred * Minimum of one year sit-down experience required * Clamp attachment operation is a plus * Must be able to work in a fast-paced environment * Basic knowledge of mathematics * Ability to communicate orally and in writing (English required, Spanish is a plus) * Must be self-directed and have the ability to work with little supervision * Will be required to be certified in Lockout/Tag Out and Forklift Operation upon assignment Skills and Competencies * Mathematical Skills: Ability to do simple math equations (add, subtract, multiply, divide, and percentages) and able to use a calculator * Communication Skills: Must be able to read, write & understand basic English and/or Spanish. Able to communicate effectively, positively interact with coworkers and management, and deal effectively & professionally under pressure * Computer Skills: Ability to learn and use internal programs such as SAP. Education Requirements * Grade 10 or equivalent education; up to and including 1 year of related training or experience * Must obtain a Pactiv Lift Truck License * Must obtain a valid State Driver's License * Must not have any active step-two write-ups * Must have less than 4 attendance points Physical Requirements * Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA, and other federal, state, and local standards, including meeting qualitative and/or quantitative productivity standards. * Ability to maintain regular, punctual attendance consistent with the ADA, FMLA, and other federal, state, and local standards. * Must be able to lift and carry up to 50 lbs Qualifications What You'll Get From Us Benefits With safety as our top priority and a commitment to employee well-being as an important focus, we offer comprehensive and competitive benefits that include medical, dental, and vision insurance as well as a variety of other well-being resources focused on mental, physical, and financial health. Specific benefits and well-being programs may vary depending on where you work. Community Engagement At Novolex, giving back to the local communities that support us is important. Our Focused Giving Program prioritizes support for organizations whose missions promote sustainability initiatives or address food and hunger needs. We also encourage facility-level support of activities in the communities where our employees live and work. Training and Development We offer constant opportunities for advancement. From skills development to advanced education programs, training and development programs, and courses are available through MyLearning. Programs include company and industry training curricula, support for formal education through the Tuition Reimbursement Program, and a Learning Management System that supports and enhances employee skills at all levels of the organization. Novolex is committed to providing equal employment opportunity in all employment practices, including but not limited to selection, hiring, promotion, transfer, and compensation to all qualified applicants and employees without regard to age, race, color, national origin, sex, pregnancy, sexual orientation, gender identity, religion, handicap or disability, genetics, citizenship status, service member or veteran status, or any other category protected by federal, state, or local law. Any individual who, because of his or her disability, needs an accommodation in connection with an aspect of the Company's application process should contact my **********************. Responsibilities Novolex, Where Packaging Innovation Meets Career Opportunities! Lift Truck Operator | Santa Fe Sprinks, California|Hiring Immediately Compensation - Competitive starting pay range of $19.96-$23.00 per hour, paid weekly - Pay: Competitive starting pay rate based on experience and qualifications - Bonuses: Eligible for a monthly bonus based on plant productivity - Add EXTRA money to your paycheck by referring friends and family Available Shifts - 1st: 6:00 am - 2:30 pm - 2nd: 2:00 pm - 10:30 pm - 3rd: 10:00 pm - 6:30 am Position Overview As a key member of the production team, this role ensures continuous workflow by maintaining a steady supply of materials to the production line. The individual in this position collaborates closely with team members and leverages their knowledge to support others, contributing to overall efficiency and operational success. Operate all warehouse equipment required to transfer finished goods and other products to the appropriate areas. All warehouse equipment includes, but is not limited to, forklift, clamp truck. Essential Duties and Responsibilities - Load and unload trucks efficiently in accordance with department standards - Stock all goods in a safe and stable manner - Communicate pertinent information to the relief at shift change - Follow all safety policies and procedures - Maintain work area in an organized, safe, and clean manner. Knowledge of 6s is a plus - Know locations and how to operate emergency stop buttons and fire extinguishers - Complete forklift checklist - Monitor and record all products returned/received - Check the accuracy of finished product count on pallets, product ID, ensure all pallets only have one Port Ticket on them when removing from lines, and accurately complete all required paperwork - Fill forklift propane tank at the end of the shift - Accurate Cycle counts as designated by the Team Leaders - Effective organization and staging of materials to support the accuracy of inventories - Knowledge of LOTO procedures is a plus Qualifications - Minimum of one year of recent forklift experience preferred - Minimum of one year sit-down experience required - Clamp attachment operation is a plus - Must be able to work in a fast-paced environment - Basic knowledge of mathematics - Ability to communicate orally and in writing (English required, Spanish is a plus) - Must be self-directed and have the ability to work with little supervision - Will be required to be certified in Lockout/Tag Out and Forklift Operation upon assignment Skills and Competencies - Mathematical Skills: Ability to do simple math equations (add, subtract, multiply, divide, and percentages) and able to use a calculator - Communication Skills: Must be able to read, write & understand basic English and/or Spanish. Able to communicate effectively, positively interact with coworkers and management, and deal effectively & professionally under pressure - Computer Skills: Ability to learn and use internal programs such as SAP. Education Requirements - Grade 10 or equivalent education; up to and including 1 year of related training or experience - Must obtain a Pactiv Lift Truck License - Must obtain a valid State Driver's License - Must not have any active step-two write-ups - Must have less than 4 attendance points Physical Requirements - Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA, and other federal, state, and local standards, including meeting qualitative and/or quantitative productivity standards. - Ability to maintain regular, punctual attendance consistent with the ADA, FMLA, and other federal, state, and local standards. - Must be able to lift and carry up to 50 lbs

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. ESSENTIAL FUNCTIONS OF THE JOB: Performs typical machine shop and mold press operations to support the assembly floor. Detects and reports defective materials or questionable conditions to the department supervisor. Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations. Performs prescribed preventative maintenance on machines as required per the P.M. charts. Must be able to perform but not limited to the following tasks: milling, turning, drilling, taping, de-burring, molding and all bench operations and inspect. Must be familiar with the basic machine functions in order to perform the tasks stated above. Must be willing to accept and receive frequent supervision and assistance with regard to machine set-up. EDUCATION: High School diploma or General Education Degree (GED) preferred. EXPERIENCE: 0-3 years of factory-related experience. Training in general safety, electrostatic discharge awareness, foreign object damage awareness and quality system awareness. KNOWLEDGE/SKILLS/ABILITIES: Competence to read and comprehend simple instructions, short correspondence, and memos. Ability to present information effectively one-on-one. Good computer, math and reading skills needed. Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. PHYSICAL AND ENVIRONMENTAL ELEMENTS: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. The employee is regularly required to sit and talk or to hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $18 to $20/hour RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #27.2-0/1

Since 1996, Boudreau Pipeline Corporation continues to be Southern California's premier pipeline company that provides quality solutions and installations for wet utilities including sewer, water, storm drain systems and fire lines. We specialize in both conventional and highly complex pipeline projects for leading commercial, industrial and residential builders, municipalities, utilities and contractors. As a proud partner with the Laborers' Union, we continue to provide the best support to our team of employees, their families and our community. Surveyed as a Top Workplace for the 8th year in a row by our Employees, we continue to provide superior on-the-job training, career advancement, safety and a dynamic company culture while practicing our Guiding Principles; Mutual Respect, Accountability and Responsibility. Come join our family, We Dig Your Future!™ Currently offering sign-on bonuses for qualified candidates! **Must have WET UTILITIES experience (dry utilities, oil, & gas will not be considered)** Responsibilities Operates heavy equipment of various sizes and weights used in road, site or highway construction and paving Operates heavy equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life Performs daily safety and maintenance checks Cleans heavy equipment as scheduled and/or required Maintains the equipment and advise supervisor of any requirement for maintenance or repairs Maneuver heavy equipment into loading or unloading positions, following signals from loading crew as needed; check that the vehicle position is correct and any special loading equipment is properly positioned. Ensure a sound understanding of the issues involving ground disturbance Uses equipment as appropriate to level roads and/or working area, ensure proper drainage, and develop proper grade. Use various pieces of equipment to perform fine grading and finishing, sloping and banking, backfilling, demolition, ditching, loading, excavating and stockpiling. Uses equipment as appropriate to level roads and/or working area, ensure proper drainage, and develop proper grade Ensures a safe work environment in compliance with all safety policies and procedures using the appropriate tools and equipment for the task Properly follows all company policies and OSHA/MSHA regulations for safe working procedures and environment Reports any problems to your immediate supervisor Signals operators of construction equipment to facilitate alignment, movement, and materials with shovel Follows direction of Foreman as to daily tasks and expectations for each specific project or jobsite May be called upon to run small power tools such as jack hammer Digs, spreads, and levels construction materials Lifts, carries and holds material, tools and supplies Maintains regular and predictable attendance at assigned times is required Other duties as assigned Safety Responsible for ensuring OSHA standards and company safety policies are complied with at all times including but not limited to operation of tools, equipment and machinery Corrects unsafe conditions in work area and report any conditions that are not correctable to supervisor immediately Qualifications Considerable knowledge of equipment operations and construction and maintenance procedures Must possess a working knowledge of grades and blueprints Skill in operation of assigned equipment Ability to follow verbal and written instructions. Ability to establish effective working relationships with other employees and general public Pay Range: $30.00 - $45.00/hr based on experience. Not ready to apply? Connect with us for general consideration.

Job DescriptionBenefits: 401(k) matching Company parties Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Level 1-3 Machinist - is responsible for setting up and producing machined parts by operating a CNC machine; maintaining quality and safety standards; keeping records; maintaining equipment Role and Responsibilities 1. Setting up and Running CNC machinery for production runs. 2. Ensure the machine has the proper computer program and necessary tools installed. 3. Position the materials being used on the machine and turn on the power. 4. CNC machine operators monitor machinery for any problems during the production run. If there is an issue, operators may adjust the program to correct the problem or consult with a programmer who fixes the program. After items have been produced, machine operators ensure that they meet specifications and verify their quality per procedure. 5. Must interpret blueprints, manuals, and other work instructions. Understands what non-conforming product is and how to take appropriate actions. 6. CNC operator machinists additionally clean and perform basic preventative maintenance functions on machines, tooling and parts. They must work safely to prevent on-the-job injuries, which includes wearing personal protective equipment such as safety glasses. They also inspect cutting tools for sharpness and usability. 7. Detect malfunctions using precision measuring instruments such as micrometers, dial calipers, depth gages, indicators and scales, according to manufactures spec. Communicate with Shop Foreman and Production scheduler for assignments, and to resolve machining or quality issues as well. Qualifications and Education Requirements 8. Self-Starter 9. Ability to work alone 10. Positive attitude 11. Attention to detail 12. Ability to meet tight deadlines 13. Ability to solve problems independently and must not be afraid to ask for help when needed 14. High School graduate 16. Requires basic shop mathematical skills. 17. Must have strong oral and written communication skills, and be able to follow verbal and written instructions well. 18. Must be open to being exposed to noise, fumes and varying temperatures. 19. Must be able to perform repetitive motions and must have strong finger dexterity. Preferred Skills 20. Ability to adapt to changes in procedures 21. Great note taking 22. Organization and time management 23. Strong Attention to Detail 24. Able to Follow Verbal and Written Instructions

At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil, 'all, Loctite, Snuggle, and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Adhesive Technologies business unit - where we empower our people to transform industries and provide our customers with a competitive advantage through adhesives, sealants and functional coatings. Dare to learn new skills, advance in your career and make an impact at Henkel. What you´ll do * Operates machines and production equipment safely in accordance with instructions. * Sets up or adjusts equipment according to manufacturing specifications. * Monitors the quality of output to identify or discard re-manufacture faulty products. * Maintains accurate daily production records so that manufacturing performance can be analyzed. What makes you a good fit * Follows instructions, * Detail oriented, * Knows Microsoft Office. * Eyes for detail. * Experience in 5S, SAP, and QMS preferred. * Able to be on feet, performing physical work for entirety of shift. Some benefits of joining Henkel * Health Insurance: affordable plans for medical, dental, vision and wellbeing starting on day 1 * Work-Life Balance: Paid time off including sick time, vacation time and holiday time * Financial: 401k matching, employee share plan with voluntary investment and Henkel matching shares, annual performance bonus, service awards and student loan reimbursement * Family Support: 12-week gender neutral parental leave (up to 20 weeks for parents giving birth), fertility support, adoption & surrogacy reimbursement, discounted child and elderly care, and scholarships * Career Growth: skill development programs, promotional opportunities and tuition reimbursement The salary for this role is $22.00 - $26.00. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel does not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered Henkel property and therefore, Henkel will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. JOB ID: 25088764 Job Locations: United States, CA, Rancho Dominguez, CA Contact information for application-related questions: ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. Application Deadline: As long as the vacancy is listed on our Career Site, we are happy to receive your application Job-Center: If you have an application already, you can create or log in to your account here to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. Accept for all YouTube content LOAD EXTERNAL CONTENT Deactivate loading external content from YouTube. How is work at Henkel About Henkel Building on a strong legacy of almost 150 years, we are leading the way to reimagine and improve life every day. Today and for generations to come. Through our innovative and sustainable brands and technologies, across our teams around the world. Henkel holds leading positions in both industrial and consumer businesses: Our portfolio includes well-known hair care products, laundry detergents, fabric softeners as well as adhesives, sealants, and functional coatings.

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The Chemical Lab Operator analyzes the chemical concentration of all chemical processes, using laboratory instruments and equipment, to ensure that all jobs are processed in accordance with work instructions and Standard Operating Procedures. Please Note: The available work schedule consists of second-shift hours (4:00pm - 12:30am); however, training will take place during the first shift (7:30am - 4:00pm). What You'll Do: Review and become familiar with SOPs, work instructions, and follow Manager's direction to ensure compliance with specifications. Perform Ionic contamination testing. Perform X-ray Fluorescence (XRF) testing. Prepare testing samples and perform analytical testing to check chemical concentration based on Truechem schedule. Record and maintain PAL, Log, and test results. Review lab results and consult with the Manager and Process Engineer if any addition, new make-up, or bailout is needed. Perform routine scheduled Chemical PMs which include the removal of spent baths, spent rinse water baths and the makeup of fresh baths (per instructions) and rinse baths. Keep inventory of chemicals and all other laboratory supplies and equipment. Clean and maintain laboratory equipment. Assist Wastewater Treatment Department as needed. Perform other duties as needed. What You'll Bring: Ability to read, communicate and understand documents such as Travelers, standard operating procedure, instructions, and safety rules in English to the degree necessary to perform the job Basic proficiency with Microsoft office Must be detailed oriented and self-motivated Must be able to remain focused with minor interruptions Must be able to work overtime as required Education and Experience: High School Diploma or General Education Degree (GED) (Required) Experience in printed circuit board (PCB) manufacturing environment (Preferred) Minimum of 1 year of chemical laboratory experience in a manufacturing environment (Preferred) Please note that in addition to frequent standing and walking, the work environment requires lifting, pushing, pulling, and carrying up to 25 pounds, and frequent twisting/turning and reaching outward. Schedule: 8-hour shift Evening shift Monday to Friday Overtime and Weekends as needed Shift Available: 2nd shift, Monday- Friday, 4:00 pm-12:30 am **Please Note: Successful candidate must be available to train during 1st Shift (7:30am to 4:00pm) Job Type: Full-time California Pay Range$17-$19 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Who is Steico Industries? STEICO has made its name manufacturing precision tube and duct assemblies to the world's major airframe manufacturers. We manufacture tube and duct assemblies. We work with a wide variety of materials including aluminum, steel, titanium, and other alloys and produce parts of all complexities. STEICO holds accreditations with NADCAP and is certified to AS9100 and ISO14001. Our focus on responsiveness and continuous improvement regularly creates manufacturing innovation. STEICO is an integral part of our customers supply chains that include Boeing, Lockheed Martin, BAE, Northrop Grumman, Honeywell, Honda Aviation, and many others. About our parent company: Senior is an FTSE UK based international manufacturing Group with 26 operations in 12 countries. Senior designs, manufactures and markets high-technology components and systems for the principal original equipment producers in the worldwide aerospace, defense, and land vehicle and power & energy markets. We have a long history of well-respected brands and an excellent reputation in our key market sectors. Senior delivers value to its customers and shareholders via operational excellence that is underpinned by its people and processes. Senior's experienced manpower support, effective use of raw material, and high technology enable it to deliver optimized components within a short development time and at most competitive prices. The Group is split into two divisions, Aerospace and Flexonics, servicing five key sectors. Our global values underpin what we do, and how we do it … Job Description AM Shift: Monday - Friday 7:00AM - 3:30PM Pay: $17.00 - $18.00 an hour depending on experience Safety - Integrity - Customer Focus - Respect & Trust - Accountability - Excellence As a Shipping Operator you will: Packing products and preparing them for delivery. Navigating customer websites and data entry. What will my responsibilities include? Verifies and keeps records of outgoing shipments and prepares items for shipment: Compares identifying information and counts, weighs, or measures items of outgoing shipments to verify information against bills of lading, invoices, orders, or other records. Prepares items to remain free from damage in transit or storage by use of protective sleeves, wrapping, and padding. Is expected to visually inspect outgoing product as the last line of defense in the company-wide quality system. Input of data entry. May coordinate with others in preparing outgoing shipments. Access customer portals to determine shipping instructions. Move material to other areas of the factory. Clean and maintain work area as part of 5s program Maintaining 5's + Safety of department Serve as a backup driver for the department when needed Other reasonable duties as business and operational needs dictate - overtime may be required Qualifications What key skills and experience do I need? Must be able to communicate and interact effectively with employees at all levels of the organization, both verbally and written Requires ability to access facts and develop conclusions Ability to work Microsoft products (Outlook, Excel, Word, etc.) Requires ability to access facts and develop conclusions Education: High School diploma or equivalent One year of experience working in a manufacturing company Basic math skills to perform basic calculations such as addition and subtraction General understanding of Manufacturing with the ability to check and compare documents, measure parts for shipping, operate heat sealing and tape dispensing machines Additional Information Why Join Steico Industries, Inc.? Joining Steico Industries, Inc. a company of Senior Plc. means not only a rewarding career with a tight-knit and collaborative team, but you will also enjoy a competitive compensation package that includes a market-led base salary and a comprehensive benefits package along with wellness benefits, employee recognition program, matching 401k plan, paid vacation, flexible hours, employee wellness activities, tuition reimbursement, and community involvement initiatives. Please understand that you will only be considered an applicant if you apply for a posted position directly through our Company website and meet the qualifications of the job. If you need a reasonable accommodation to apply, please contact the Steico Industries at ************. Prior to an offer of employment, applicant employment references maybe requested. Trade Compliance Statement Access to our facilities is restricted under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR) to U.S. Persons (U.S. Citizens, lawful permanent residents, U.S. Nationals, U.S. refugees, asylees, or temporary residents under amnesty provisions ), and to properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive controlled technical data. To ensure there is no unexpected delay to your start date with our Company and due to the potential need to obtain an export license, we would like to promptly assess whether such a license is needed to access our facility and/or systems. Such licenses can take several weeks/months to obtain from the U.S. Government. Our Trade Compliance department may reach out to you with a Licensing Assessment form, which we request you kindly complete and return as soon as possible. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EOE M/F/D/V/VEVRAA Federal Contractor

This role operates one or more types of heavy equipment including excavators, dozers, backhoes, compactors, articulated dump trucks, and front end loaders to support earth moving activities at environmental remediation sites. Equipment may utilize CAT or John Deere control configurations. The position also performs routine inspections and minor maintenance or repairs to ensure safe and reliable operation. Primary Responsibilities: Safely and efficiently operate assigned heavy equipment with precision, coordination, and strong situational awareness. Maintain sustained focus while operating equipment for extended periods, consistently adhering to safety standards and jobsite protocols. Demonstrate working knowledge of equipment capabilities and limitations including load weight restrictions to prevent overloading or destabilization of machinery.

Permanent Pay Range Min. $45,000.00 Pay Range Max. $47,000.00 Creating foldable displays, advancing medical innovations, or giving new life to precious metals - at Heraeus, we empower our customers to stay ahead of the curve. As a family-owned global technology leader, we take pride in being the invisible force driving innovation. Whether in production, research, sales, or administration, we deliver world-class quality across key industries: Metals & Recycling, Healthcare, Semiconductor & Electronics, and Industrials. With a strong global presence, including a significant footprint in the United States, Heraeus employs approximately 16,400 people across 40 countries, all dedicated to shaping the future of technology and industry. Heraeus, the German based technology group is a leading international family-owned company formed in 1851. We create high-quality solutions for our customers by combining material expertise with technological know-how. Our ideas are focused on themes such as environment, energy, health, mobility, and industrial applications. In 2015 Heraeus generated revenues without precious metals of €1.9 bn and a total revenue of €12.9 bn. in more than 100 subsidiaries in 38 countries we offer our worldwide 12,500 employees the freedom to develop and promote their own ideas. We call it: Open Space. For Open Minds. The primary responsibility of this position is to operate chemical processes and equipment correctly, while meeting production goals and expectations on a consistent basis, while maintaining compliance of Environmental, Health & Safety Standards. Your role and responsibilities: * To operate chemical processes and equipment correctly, while meeting production goals and expectations on a consistent basis, while maintaining compliance of Environmental, Health & Safety Standards. * Must follow SOP's/POP's and all other procedures in every detail, including safety policies. * Participate in end of shift turnovers with ability to effectively communicate. * Ability to wear required PPE including respirators. * Must operate equipment (for example, pumps, GLV's, filter presses, pan filters, reactors, valves, pH probes, ovens, forklifts, etc) in a reasonable and self-sustaining manner. * Responsible for understanding basic chemical reactions and properties of chemicals within the work area. * Responsible for handling and processing Hazardous Waste as required within the work area. * At times may be required to wear hearing protection, and half-mask respirator, and other forms of PPE. What is required for this role: * HS Diploma or equivalent. * 1 to 3 years experience in basic chemical operations or related experience required * Ability to Process and follow verbal directions and written instructions. * Ability to add, subtract, multiply and convert calculations to percentage and to metric system. * Understand concepts involving statistics, probabilities and formula manipulation and perform basic calculations on volume, mass, atomic percentages, weight percentages, density, molecular weight of alloys and compounds and charge weights. * Frequently required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; smell. * Must be able to occasionally lift and/or move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. * May be assigned shifts that include evening, nights and/or weekend days. * Able to successfully complete a background check, pre-placement physical exam and drug screen. Curious? Apply now! Heraeus is proud to be an employer that provides equal access to opportunities for all its employees. We provide fair and equal consideration to all qualified applicants, regardless of sex, gender identity, sexual orientation, race, color, religion, national origin, physical or mental disability, protected veteran status, age, or any other legally protected characteristic. A diverse and inclusive culture is at the heart of our Vision, Mission, and Values. We are dedicated to cultivating a workforce that reflects a broad spectrum of cultures, backgrounds, and perspectives. We participate in E-Verify to confirm employment eligibility after hire. Learn more at **************** Any further questions? If you need any assistance or have questions, please contact ***************************** or visit our website at jobs.heraeus.com. ReqID: 58349

THE ROLE: Shift Manager * Travel Requirement: None * FLSA Status: Non-Exempt * Employment Category: Full-Time Regular * Pay Range: $22.00 to $26.00/Hr. Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of acaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit *********************** WHAT YOU'LL BE RESPONSIBLE FOR IN THIS ROLE This job contributes to Evolution Fresh success by moving product within a warehouse or distribution center in accordance with production, order and delivery schedules, and other business requirements. Models and acts in accordance with Evolution Fresh guiding principles * Performs a range of shipping, receiving and inventory control duties, including loading and unloading of trailers, replenishing stock, filling orders * Providing inventory services, and completing required documentation of product movement * Ensures quality by continually reviewing work to detect and correct errors * Safely and effectively operates a variety of powered industrial trucks to perform various distribution tasks * Demonstrates and understands safety as a core value and follows the key essentials to safety as set forth by our safety resolution; reinforces and coaches others to do the same * Understands and follows established safety guidelines, consistently complies with all safety procedures (e.g. PPE, Lock Out Tag Out) * Supports food safety, legality, and quality programs. * Maintains product quality through adherence to good manufacturing practices, Food Safety Preventative Controls, product specifications and quality procedures * Monitors and documents quality measures using analytical tools * Performs other duties as needed in support of business objectives and Evolution Fresh Mission & Values * Maintains regular and consistent attendance and punctuality WHAT WE'RE LOOKING FOR MINIMUM QUALIFICATIONS: * High School/GED or one to two years' experience in related field or combination of both education and experience ADDITIONAL REQUIRED QUALIFICATIONS: * Ability to communicate clearly and concisely, both verbally and in writing * Attention to detail * Problem-solving skills * Basic math skills * Ability to follow verbal and written direction * Ability to understand written policies and guidelines, specifications, and safety standards * Familiarity with computerized inventory and order selection systems * Knowledge of equipment maintenance * Ability to operate required material handling equipment * Ability to work on elevated equipment * Ability to work in a diverse team environment * Ability to work in accordance with safety, quality and sanitation standards, policies, and procedures * Ability to work variable shifts to support business needs PREFERRED QUALIFICATIONS: * Distribution/Warehouse experience (1 year) * Experience operating a stand-up powered industrial truck (1 year) * Familiarity with food safety regulatory requirements and global standards including Preventive Controls for Human Food (FDA Code of Federal Regulations) and the Global Food Safety Initiative (GFSI) * Experience with the GFSI certification schemes (i.e. BRC and/or or SQF). PHYSICAL DEMANDS & ENVIRONMENTAL HAZARDS: * O = Occasional (up to 25% of time) * F = Frequent (26%-74% of time) * C = Constant (75% or more of time) HOURS & WORKDAYS: * 2nd Shift - Monday to Friday 1:00pm - 9:30pm; Overtime, Weekends, and Holidays may be mandatory based on business needs. Rotating workday/time off schedules may be mandatory depending on department/business needs as well. WHAT WE OFFER plus more! Our rich benefits packages are designed to support the health and well-being of both our eligible team members and families. * Medical, Dental & Vision * Group Life and AD&D * Voluntary Life and AD&D * Group Short & Long-Term Disability * 401(k) * Paid Time Off * Flexible Spending Accounts * Employee Assistance Program * Gym Membership Discounts EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodation for qualified individuals with disabilities, as needed, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at *******************************. RECRUITMENT AGENCIES: Confidential does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI -RV1 2nd Shift - Monday to Friday 1:00pm - 9:30pm

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 1: 6:00am - 2:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) Responsibilities Operate and monitor assigned machinery and equipment according to established procedures and safety standards. Perform routine maintenance and cleaning of machines to ensure optimal performance. Read and interpret blueprints, work orders, or production schedules to determine job instructions. Inspect parts and finished products for quality and accuracy using measuring tools. Record production data, including output, downtime, and defects. Adjust machine settings as necessary to maintain product specifications and minimize waste. Collaborate with team members and supervisors to meet daily production goals. Report any mechanical issues or safety concerns to maintenance or supervisory staff. Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications High school diploma or GED is a plus; vocational or technical training preferred. Previous experience in a manufacturing or production environment is a plus. Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. Familiarity with machining processes such as cutting, drilling, or grinding. Mechanical aptitude and the ability to troubleshoot minor equipment issues. Basic math and measurement skills. Ability to read and interpret technical documents, blueprints, or schematics. Strong attention to detail and commitment to quality. Ability to work independently and as part of a team in a fast-paced environment. Willingness to work flexible hours or shifts as needed. Work Environment: Regular standing, bending, reaching, and lifting up to 50 lbs. Use of hands and manual dexterity for precise machining and tool work. Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming “the world's most trusted testing partner”. All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

THE ROLE: Shift Manager Travel Requirement: None FLSA Status: Non-Exempt Employment Category: Full-Time Regular Pay Range: $22.00 to $26.00/Hr. Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks . Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of acaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit *********************** WHAT YOU'LL BE RESPONSIBLE FOR IN THIS ROLE This job contributes to Evolution Fresh success by moving product within a warehouse or distribution center in accordance with production, order and delivery schedules, and other business requirements. Models and acts in accordance with Evolution Fresh guiding principles Performs a range of shipping, receiving and inventory control duties, including loading and unloading of trailers, replenishing stock, filling orders Providing inventory services, and completing required documentation of product movement Ensures quality by continually reviewing work to detect and correct errors Safely and effectively operates a variety of powered industrial trucks to perform various distribution tasks Demonstrates and understands safety as a core value and follows the key essentials to safety as set forth by our safety resolution; reinforces and coaches others to do the same Understands and follows established safety guidelines, consistently complies with all safety procedures (e.g. PPE, Lock Out Tag Out) Supports food safety, legality, and quality programs. Maintains product quality through adherence to good manufacturing practices, Food Safety Preventative Controls, product specifications and quality procedures Monitors and documents quality measures using analytical tools Performs other duties as needed in support of business objectives and Evolution Fresh Mission & Values Maintains regular and consistent attendance and punctuality WHAT WE'RE LOOKING FOR MINIMUM QUALIFICATIONS: High School/GED or one to two years' experience in related field or combination of both education and experience ADDITIONAL REQUIRED QUALIFICATIONS: Ability to communicate clearly and concisely, both verbally and in writing Attention to detail Problem-solving skills Basic math skills Ability to follow verbal and written direction Ability to understand written policies and guidelines, specifications, and safety standards Familiarity with computerized inventory and order selection systems Knowledge of equipment maintenance Ability to operate required material handling equipment Ability to work on elevated equipment Ability to work in a diverse team environment Ability to work in accordance with safety, quality and sanitation standards, policies, and procedures Ability to work variable shifts to support business needs PREFERRED QUALIFICATIONS: Distribution/Warehouse experience (1 year) Experience operating a stand-up powered industrial truck (1 year) Familiarity with food safety regulatory requirements and global standards including Preventive Controls for Human Food (FDA Code of Federal Regulations) and the Global Food Safety Initiative (GFSI) Experience with the GFSI certification schemes (i.e. BRC and/or or SQF). PHYSICAL DEMANDS & ENVIRONMENTAL HAZARDS: O = Occasional (up to 25% of time) F = Frequent (26%-74% of time) C = Constant (75% or more of time) HOURS & WORKDAYS: 2nd Shift - Monday to Friday 1:00pm - 9:30pm; Overtime, Weekends, and Holidays may be mandatory based on business needs. Rotating workday/time off schedules may be mandatory depending on department/business needs as well. WHAT WE OFFER plus more! Our rich benefits packages are designed to support the health and well-being of both our eligible team members and families. Medical, Dental & Vision Group Life and AD&D Voluntary Life and AD&D Group Short & Long-Term Disability 401(k) Paid Time Off Flexible Spending Accounts Employee Assistance Program Gym Membership Discounts EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodation for qualified individuals with disabilities, as needed, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at *******************************. RECRUITMENT AGENCIES: Confidential does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI -RV1

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 1: 6:00am - 2:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) Responsibilities * Operate and monitor assigned machinery and equipment according to established procedures and safety standards. * Perform routine maintenance and cleaning of machines to ensure optimal performance. * Read and interpret blueprints, work orders, or production schedules to determine job instructions. * Inspect parts and finished products for quality and accuracy using measuring tools. * Record production data, including output, downtime, and defects. * Adjust machine settings as necessary to maintain product specifications and minimize waste. * Collaborate with team members and supervisors to meet daily production goals. * Report any mechanical issues or safety concerns to maintenance or supervisory staff. * Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications * High school diploma or GED is a plus; vocational or technical training preferred. * Previous experience in a manufacturing or production environment is a plus. * Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. * Familiarity with machining processes such as cutting, drilling, or grinding. * Mechanical aptitude and the ability to troubleshoot minor equipment issues. * Basic math and measurement skills. * Ability to read and interpret technical documents, blueprints, or schematics. * Strong attention to detail and commitment to quality. * Ability to work independently and as part of a team in a fast-paced environment. * Willingness to work flexible hours or shifts as needed. Work Environment: * Regular standing, bending, reaching, and lifting up to 50 lbs. * Use of hands and manual dexterity for precise machining and tool work. * Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 2: 2-10:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) + $1.00 Shift Differential Responsibilities * Operate and monitor assigned machinery and equipment according to established procedures and safety standards. * Perform routine maintenance and cleaning of machines to ensure optimal performance. * Read and interpret blueprints, work orders, or production schedules to determine job instructions. * Inspect parts and finished products for quality and accuracy using measuring tools. * Record production data, including output, downtime, and defects. * Adjust machine settings as necessary to maintain product specifications and minimize waste. * Collaborate with team members and supervisors to meet daily production goals. * Report any mechanical issues or safety concerns to maintenance or supervisory staff. * Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications * High school diploma or GED is a plus; vocational or technical training preferred. * Previous experience in a manufacturing or production environment is a plus. * Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. * Familiarity with machining processes such as cutting, drilling, or grinding. * Mechanical aptitude and the ability to troubleshoot minor equipment issues. * Basic math and measurement skills. * Ability to read and interpret technical documents, blueprints, or schematics. * Strong attention to detail and commitment to quality. * Ability to work independently and as part of a team in a fast-paced environment. * Willingness to work flexible hours or shifts as needed. Work Environment: * Regular standing, bending, reaching, and lifting up to 50 lbs. * Use of hands and manual dexterity for precise machining and tool work. * Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.